Foreign jobs in Hempstead, New YorkCreate job alerts

Job DescriptionDescription: Under the direction of the Director of Pharmacy, each Pharmacist is responsible for the operations and safety of the pharmacy, including compounding, dispensing, scheduling, purchasing, distribution, quality improvement and regulatory compliance. Each Pharmacist is responsible for the direct oversight of all medication preparations and dispensing. The Pharmacist may also serve as the Pharmacist-In-Charge per state licensing requirements. Job Location: Plainview, NY Job Status: Full-time Requirements: • B.S. or Doctor of Pharmacy degree is required or Registered pharmacist license if foreign graduate, • Active registered pharmacy license in state(s) of practice and additional states as required without restrictions, • 1 year of hospital and home infusion therapy experience preferred, • Two years recent clinical pharmacy experience preferred, • Thorough knowledge of infusion therapies preferred, • Recent inventory management experience preferred, • Accuracy in mathematical calculations including pharmacokinetic dosing preferred, • Knowledge of CPR+ software preferred Job Responsibilities, included but not limited to: • Closely collaborate with the nursing organization to coordinate optimal care for the patients and service for the patient referral sources (e.g., hospitals, physician groups, etc…), • Able to assume temporary leadership of the pharmacy with minimal supervision, as designated by the Pharmacist in Charge, • Checking and dispensing of medications in compliance with state and federal laws, • Maintain strong knowledge of PromptCare’s Standard Operating Procedures (SOPs) and ensure that they are applied consistently, • Demonstrate thorough understanding of pharmacy rules and government regulations and dispense accordingly, • Answer a variety of questions as presented by PromptCare’s, technicians, nurses, and salespeople, • Other duties assigned Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and listen. The employee is required to perform repetitive standing, sitting, stooping, walking, stretching, reaching, typing and use full range of body motions. This position requires the ability to occasionally lift office products and supplies of 25 pounds or more. Benefits & Perks • Competitive Salary, • Medical, Dental, Vision Package, • 401(k) plan (discretionary), • PTO - Vacation, Sick and Personal days, and paid holidays, • Referral bonuses & Discount Ticket Program, • Lunch & Learn Programs, • Employee Recognition Program Equal Employment Opportunity The PromptCare Companies is committed to Equal Employment Opportunity (EEO) and prohibits employment discrimination on the basis of race, color, age, national origin, religion, gender, gender identity, sexual orientation, pregnancy, marital status, genetic disposition, disability, veteran's status or any other characteristic or classification protected by State/Federal/Local laws. We foster a work environment in which diversity and inclusion are embraced, people are hired and advanced on their merits, and employees are treated with mutual respect and dignity.

TITLE: LICENSED PSYCHOLOGIST / LICENSED CLINICAL SOCIAL WORKER(CBT Focus) LOCATION: GREAT NECK, NY EMPLOYMENT STATUS: W2, FULL-TIME/ IN- PERSON COMPENSATION: $140,000 - $180,000 ANNUALLY WHAT WE DO: The Bio Behavioral Institute (BBI) is an outpatient Mental Health clinic; we specialize in treating OCD and Related Disorders including BDD, Body Focused Repetitive Disorders, Anxiety, Mood, Trauma, Autism Spectrum, and other co-morbid conditions. At BBI, we’re more than just a clinic; we’re a movement for change. For over 45 years, we’ve pioneered the treatment of OCD, BDD, and anxiety-related disorders, earning a reputation as a thought leader in the space. Through cutting-edge research and personalized care, we’ve helped over 4,000 individuals lead richer, more fulfilling lives. We’re not just here to reduce symptoms; we’re here to change lives. Our approach is grounded in evidence-based treatment, where every member of our team plays a part in transforming lives—one patient at a time. WHAT YOU’LL DO: As a Licensed Psychologist / LCSW, you will provide evidence-based care to individuals with OCD, anxiety, and related disorders. Working closely with a multidisciplinary team, your role will include delivering individual, group, family, and couples therapy, as well as participating in our Intensive Outpatient Program (IOP). Half your time will involve collaborating with a team of therapists to treat shared IOP patients. When clinically appropriate exposure exercises can involve some out of office and home visits guiding patients through real-world situations that trigger their symptoms and working through them in real time, which we believe leads to better outcomes. At BBI we foster a safe, creative environment that encourages innovation to achieve patient outcomes. Beyond patient care, you’ll have the option to contribute to advancing the field by actively engaging in research to push evidence-based treatment forward. Key Responsibilities: • Conduct Individual and Group Therapy: Utilize evidence-based practices, such as CBT, ERP, DBT, ACT, CPT, CBT-ED, and PE, to treat individuals with OCD, BDD, anxiety, and related disorders. Applicants need a strong foundation in CBT and a directive approach with patients., • Participate in the Intensive Outpatient Program (IOP): Provide therapeutic interventions for higher-severity cases, ensuring optimal patient outcomes. A significant part of this is engaging in ERP therapy both in and out of the clinic, • Comprehensive Patient Assessments: Perform diagnostic evaluations, develop treatment plans, and monitor progress over time., • Collaborate with Multidisciplinary Teams: Work alongside other clinicians and administrative staff to ensure coordinated care and optimal treatment outcomes., • Contribute to Program Development: Assist in refining and improving treatment protocols based on the latest research and clinical outcomes., • Mentorship and Supervision: Depending on experience, provide guidance and supervision to early-career clinicians or trainees., • Engage in Professional Development: Stay updated on the latest research and advancements in treating OCD and related disorders. WHAT WE’RE LOOKING FOR: Required Qualifications and Skills: • Education: Doctorate in Psychology (Psy.D. or Ph.D.) from an accredited program. School psychologists with a doctoral degree and clinical experience are also encouraged to apply. Masters in Clinical Social Work., • Licensure: Must hold a current license to practice in the state of New York. Multiple state licenses are a plus., • Clinical Experience: Demonstrated experience with a CBT forward approach to care using evidence-based methods., • Therapeutic Expertise: Familiarity with other evidence based approaches as evidenced by clinical work, publications, or conference presentations. Examples include ERP, DBT, ACT, CPT, and PE, CBT-ED., • Interest in OCD and Related Disorders: Expressed dedication to treating OCD and related disorders, Eating Disorders, ASD, Mood Disorders, Anxiety, or Body Image Disorders. And an interest in addressing the co-morbid interactions between these., • Adaptability: Comfortable working with higher-severity populations and going out in the community to provide ERP treatment for patients ., • Strong Communication Skills: Ability to effectively engage with patients, families, and colleagues in a professional and empathetic manner., • Eagerness to embrace the BBI values:, • Care Deeply, • Stay Humble and Open, • Get Results, • Team Up, • Be Creative and Flexible Preferred Qualifications and Skills: • Experience with High-Acuity Patients: Background in hospitals, residential, or inpatient settings treating complex disorders such as eating disorders, personality disorders, or autism spectrum disorders., • Academic Contributions: Research, publications, or presentations related to OCD, anxiety, or other related disorders., • Connections to Academic Programs: Training programs at universities with a strong emphasis on evidence based CBT., • Collaborative Spirit: Demonstrated ability to thrive in a team-oriented clinical environment., • Commitment to Evidence-Based Practice: Proficiency in implementing and adapting the latest research to clinical settings. WHAT WE OFFER: • Unmatched Expertise: You’ll have the opportunity to learn directly from and collaborate with industry experts like Dr. Fugen Neziroglu and Dr. Sony Khemlani, known for their extensive research on OCD, anxiety, BDD, and related disorders., • Pioneers in OCD Treatment: Not just treating but looking to continue to push evidence based treatment forward through research and training. Working to develop the next generation of therapists., • Career Growth: Heavy focus on training here and expectation to be at the cutting edge of current therapeutic approach, • Supportive and Regular Supervision: Opportunities for supervision, training and support, • Impact: With treatment you’ll be supporting many of these patients as they are able to re-enter and participate in their lives again. This is life changing work!, • Culture: Because of our team IOP approach our culture is very collaborative. You are sharing these cases and approaching their treatment as a team. It allows you to develop deeper relationships with your peers leading to more support for you and real team environment, • Benefits: 401k, Flexible time off; Medical and Vision Insurance Bio Behavioral Institute is an equal-opportunity employer that embraces diversity and inclusion in the workplace. We are committed to building a team that represents a variety of backgrounds, skills, and perspectives because we know this only makes us better. We strongly encourage women, persons of color, LGBTQIA+ individuals, persons with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply even if you do not meet 100% of the qualifications.

Job DescriptionWho We Are: At Diamond Braces, we believe in improving lives through healthier smiles. Our mission is to provide orthodontic care that is affordable, accessible, and delivered with amazing customer service—the 'AAA Experience.' We’re committed to making every smile count, and we live by our “No Smile Left Behind” philosophy. At Diamond Braces, your career growth is our priority. We provide continuous opportunities to learn, advance, and take on new challenges. As part of our team, you’ll have a clear path to success, with the support and resources you need to reach your professional goals while making a meaningful impact on our clients’ lives. Dental Assistant Do you have a smile that lights up the room? Join our fun, fast-paced dental team as a Dental Assistant! You’ll work side-by-side with doctors, help create confident smiles, and keep our patients comfortable and cared for. If you’re upbeat, organized, and ready to make a difference every day — we want to meet you! Essential Functions: • Performs sterilization procedures following protocols set in accordance with established guidelines, • Prepares dental equipment and instrumentation - tray set-ups for dental procedures, • Obtains diagnostic records ordered by a dentist including X-Rays, intra-oral scans/photos, and alginate impressions, • Provides direct patient care under the direct supervision of a dentist, • Creates entries in patients' medical records as directed by the treating dentist, • Provides patient education including care instructions, • Performs basic lab duties including the fabrication of Essix retainers, • Prepares and documents lab cases ensuring timely delivery Qualifications: • High school diploma or equivalent., • Minimum of 6 months of experience in a dental or healthcare setting., • Knowledge and understanding of dental terminology, techniques, and procedures., • Relevant dental assistant licensure (if required by state law) or experience as a foreign trained dentist a plus., • Compliance with continuing education requirements to maintain state license/certification (if applicable)., • Proficiency in dental software and technology., • Strong communication and interpersonal skills., • Commitment to continuous learning and professional development., • Ability to work efficiently in a fast-paced environment. Benefits: * Highly competitive compensation. * Health, dental, and vision insurance. * 401(k) retirement plan with company match. * Paid time off and holidays. • Discounted orthodontic care for you and your family., • Loan assistance for dental assistant school and continued education (CE). Access to cutting-edge technology and world-class facilities. * A fun, inclusive, and supportive culture where your career can thrive. Job Type: Full-time Compensation: Pay range starting at $20.00 an hour; final offer will be determined by experience and qualifications. Job Location: In-person; local travel between offices may be required. Work Hours: Monday-Thursday (8:30 am - 6 pm or 9:30 am - 7 pm), Friday (8:30 am - 5 pm), Saturday (8:30 am - 4 pm)

Job Description Are you passionate about project management and dedicated to continually delivering excellence? If so, we have an exciting opportunity for you to join our team as a Project Manager. We’re seeking a Project Manager who thrives in a dynamic environment, can drive multiple complex projects to completion, and lead with accountability and precision. This is a local, on-site role based out of our Port Washington office, with some travel to federal project sites as required. VIRSIG heroically provides global technology integrations, construction solutions, and professional services worldwide. We service federal, state and local government agencies and commercial entities who believe what we believe. We are committed to protecting America’s warfighters, first responders, and installations against all threats, foreign and domestic. As a Project Manager, you will play a pivotal role in leading and managing Electronic Security Systems (ESS) projects from inception to completion, ensuring that they are delivered on time, within budget, and to the highest quality standards. You will work closely with our clients, project teams, and subcontractors to coordinate project activities, mitigate risks, and achieve project objectives while maintaining strict adherence to contractual requirements, company standards, and government regulations. This is a unique opportunity to be part of a dynamic team that is shaping the future of security technology and making a meaningful impact on national security. If you are a motivated, results-driven professional with a strong background in project management and a passion for serving those who serve, we invite you to join us. Job Details Responsibilities • Manage, oversee and coordinate all field activities for various types of projects, including large and complex or multi-phased projects, from deployment through completion and sign-off, • Maintain accurate and up to date records of job status, job changes, material flow and other control records necessary for processing of internal and external reports or approvals, • Proactively identify and communicate potential project risks and collaborate to develop/implement strategies to minimize impact and control deviations from estimated costs and project deadlines, • Proactively communicate project status, schedules, change proposals, change orders and related project activities on a regular basis with Operations Team and customer as directed, • Coordinate the procurement of materials, supplies, services, and controls necessary for timely and cost-effective completion of project within budget, • Ensure project milestones are achieved; identify risks and develop mitigation strategies; adjust or correct project plan and/or project cost estimates as necessary to meet schedule and financial goals, • Understand and manage the scope of work and terms and conditions in customer contracts, including cost control, delivery fulfillment, quality of service and other customer requirements, • Bachelor’s degree in management, engineering, or related field or equivalent experience, • Minimum of five years of project supervisory experience required, • Minimum of eight years of previous relevant installations, field service, project management or engineering experience with US government contracts or operations preferred; at least 5 years managing projects focused on installation, integration, or maintenance of electronic security system, • Experience in one or more of the following industries preferred: Construction, logistics, low-voltage or wireless communications, electrical, fire alarm & life safety, and/or building automation, • Project Management Professional (PMP) certification a plus; project-specific industry certifications and/or licenses required, • OSHA 30 preferred, • Expert organizational and project management skills including cost control and financial analysis, • Technical aptitude in subject matter area a huge plus (construction, electronic security/fire alarm systems, network/IT, wireless or other communications systems), • Leadership, mentoring, and staff development skills - Act as a role model and leader for assigned teams and ensure all team members are treated fairly and provided growth opportunities, • Adaptability to respond effectively to changes in situation or information; ability to influence others and build consensus using written and verbal communication skills, • Ability to build collaborative work environment for customer, stakeholders, and team members, • Proficiency in Microsoft Outlook, Project, Excel, Word, and PowerPoint; familiarity with schedule/Gantt chart review and analysis, • Ability to walk up to a mile without physical distress and climb stairs, • Frequent prolonged periods of standing, bending, pulling, twisting, reaching, and climbing, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus, • Occasionally, the colleague may be required to climb and work in high places, stoop, bend, or reach above the shoulders, • Frequently required to sit, stand, walk, talk, or hear; use hands to handle or touch objects or controls, • Must be able to lift, push, or pull up to 25 pounds and occasionally lift, push, or pull up to 50 pounds Work Environment, • This is an office-based position which requires regular work-related travel and visits to work sites in the field; site conditions will vary, • While performing the duties of this position, the employee may be exposed to weather conditions from above 100oF to below 0oF and exposed to various climates and conditions, • May require work in confined spaces, • Risk of electrical shock and/or radiation may be present At VIRSIG, we believe that service to others can change the world. We believe that those who serve with strong morals and character can inspire others to do the same and overcome obstacles and challenges that many may see as insurmountable. We believe that it is our duty to defend, protect, and serve those that uphold our nation’s values. If you’re driven and looking for a place to grow, come join us. VIRSIG’s Core Values • People Matter, • Do the Right Thing, • Endless Pursuit of Excellence, • Long-term vs Short-term Focus, • Be Heroic!, • Never Give Up VIRSIG offers eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, professional development assistance, as well as participation in a 401(k) plan with company match. Salary will be commensurate with experience. VIRSIG is proud to be an equal employment workplace. Individuals seeking employment at VIRSIG are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR jncC0R3QwB

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned assembly operations using all applicable occupational skills, with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate wiring and assembly operations to production standards.\n, • Records, maintains and researches/retrieves data via paper or computer, as applicable.\n, • Moves assigned electro-mechanical hardware through production to its next corresponding operation when required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Capable of conducting continuity checks.\n, • Capable of being certified for all assigned tasks within the scope of this job description and the applicable occupational skills.\n, • Satisfactorily demonstrates the ability to fulfill the required technical qualifications of the job by taking an applicable practical demonstration.\n, • Minimum of 1-4 years directly related experience, or IPC Certification\n, • High school diploma or equivalent\n, • Rarely lifting over 25 lbs. of weight\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $39,099 - $58,649 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $101,807 - $179,040 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned machining operations using all applicable occupational skills with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate machine and assembly operations to production standards.\n, • Produces simple sketches describing order of machining operations, when required.\n, • Sets up, programs and operates automatic, semi-automatic and manual machine equipment including milling, lathe, punch press, drill press, grinders, shears, saws and related equipment necessary for the maching and manufacture of chassis, racks, consoles, brackets, terminal boards, printed circuit boards, panels, welding, sheet metal, repair rework, etc.\n, • Records and maintains data, as required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Knowledge of applicable Company and military specifications.\n, • Capable of being certified to Company standards.\n, • Works to extremely close tolerances with all types of machine tools.\n, • Thorough knowledge of required shop mathematics.\n, • Reads and interprets complex blueprints.\n, • Determines type of machines and required sequences of operations.\n, • Capable of drilling, pinning, riveting and assembly operations.\n, • Sets up and runs operations on all types of machines and equipment.\n, • Proficient in meeting all Company quality Standards required for job function.\n, • Complies with all Company Safety Regulations and maintains a clean, non-hazardous work environment.\n, • Capable of performing job tasks in accordance with all related Company Standard Operating Procedures (SOPs).\n, • Complies with all related Company policies and procedures.\n\n Skills: \n • Minimum of 6 years directly related experience\n, • Able to use a variety of precision measuring instruments\n, • Experience with sheet metal & aluminum repairs\n, • Welding experience helpful\n, • Experience with hand tools\n, • High School diploma or equivalent.\n\n #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $0 - $0 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Summary: Assembles/disassembles electronic equipment or systems ranging in complexity from simple to highly complex for repair, rework and modification. Removes and replaces discrete components and microcircuits, installed using through hole and surface mount technology. Reworks damaged/defective printed circuit boards using various techniques and tools. Modifies units based on Engineering notes, schematics PCNs or rework instruction. Provides feedback to Service Center management and Engineering as necessary regarding product improvements or changes to ease assembly or modification. Simple to moderate level testing and troubleshooting. Occasional travel to support field modifications at customer sites. Essential Duties & Responsibilities: \n • Utilize various soldering techniques to remove/replace wires, resistors, capacitors, microcircuits and other discrete components, etc. from circuit boards, chassis, etc.\n, • Review and analyze sketches and drawings of parts and assemblies prepared by shop management or Engineering to determine how a unit is assembled and suggest changes when necessary.\n, • Document work performed on standard company forms or electronic data collection devices.\n, • Perform continuity testing, operate manual or ATE test equipment to supplement Service Technicians when necessary.\n, • Support onsite repairs or modifications at customers' facilities.\n, • Assist in training lower grade associates.\n, • Perform additional tasks as may be directed by Departmental Management\n\n Skills: \n • High school diploma or GED\n, • 8-10 years experience on an electronic production assembly line or service repair facility assembling reworking/repairing complex or highly complex electronic equipment\n, • Ability to read and comprehend drawings, sketches, written assembly instructions and procedures written in English\n, • Ability to communicate suggestions and ideas to improve products or procedures to department management\n\n #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $55,158 - $87,185 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

The Pharmacist may also serve as the Pharmacist-In-Charge per state licensing requirements. Each Pharmacist is responsible for the direct oversight of all medication preparations and dispensing. Doctor of Pharmacy degree is required or Registered pharmacist license if foreign graduate.

Job DescriptionNelson's Auto Salvage is looking for Auto parts sales person for our Nassau location. Must have experience working for an auto salvage yard Responsibilities and required skills are 1. Experience in the used auto salvage industry., 2. Confident knowledge of inner workings of foreign and domestic vehicles., 3. General computer knowledge., 4. Knowledge of HOLLANDER program and the ability to use the interchange parts program., 5. Experience with Car-parts.com program, 6. Knowledge of all aspects for the sale of used and recycled auto parts, 7. Need to have excellent customer service skills, 8. Looking for a DEPENDABLE, MATURE, RESPONSIBLE PERSON to be a team player., 9. This sales position is for an independent highly motivated person.

Job Description Job Summary: Responsible for generating new business of any customer between NNR USA offices and the NNR Worldwide Organization of offices, partners and agents. Duties & Functions Essential: • Generate new business, while maintaining and expanding business with existing customers between NNR USA offices and the NNR Worldwide Organization of offices, partners and agents., • Work with the Branch Manager to expand new business., • In cooperation with the NNR USA Global Accounts Manager, personal sales specifically to targeted Major/Global Accounts in the given sales territory., • Minimum 40 outside sales calls per month to new and existing clients and record them in PowerNet sales., • Must spend 70% or more of time engaged in making sales calls or other service related activities away from the place of business., • Record all Sales Leads and Routing Orders in PowerNet sales and meet the company standards for these targets on a monthly basis., • Maintain a profit level of three times your salary on a monthly basis., • Participate in scheduled sales T-cons., • Generate all sales reports in PowerNet sales., • Maintain all set targets for reporting sales person as indicated in the Sales Manual. Education & Experience: • Minimum 2 years of college or military service, bachelor’s degree preferred., • Minimum 2 years or sales or equivalent industry experience., • Five years of experience in the freight forwarding or logistics industry., • Solid of customer service techniques., • Proficient computer knowledge to include Windows and Microsoft Office applications., • Flexible and long hours sometimes required., • Medium work - Exerting up to 50 pounds of force occasionally, frequently and/or constantly to lift, carry, push, pull or otherwise move objects., • Overnight travel may be required, including foreign travel.

Hofstra University is nationally ranked and recognized as Long Island’s largest private university located in Hempstead, N.When you work at Hofstra, you join a team of talented professionals committed to preparing students for the challenges of tomorrow, in an environment that cultivates learning

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

PLEASE DO NOT APPLY IF YOU DO NOT HAVE EXPERIENCE WORKING IN THE CONSTRUCTION INDUSTRY, AS YOUR RESUME WILL NOT BE CONSIDERED.Queens flooring firm seeking a motivated, organized candidate who is familiar and has experience within the Construction Industry to join our team.Under the direction of the

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

DO YOU HAVE WHAT IT TAKES TO JOIN THE DRYBAR FAMILY?.Drybar started back in 2010 with its first shop in Brentwood, CA.Drybar has exploded into a nationally recognized and highly sought-after brand.At Drybar, our philosophy is simple.Focus on one thing and be the best at it.For us, that's blowouts! W

Travel Requirement: Up to 50-70%.Primary responsibilities include, but are not limited to the following:.Assist the Construction Project Manager in overseeing pre-opening activities across multiple adventure park construction locations.Track project milestones and timelines, ensuring construction st

Project Manager – Elevator Cab Manufacturing.We are seeking an organized and goal-oriented.The ideal candidate will have experience in the.Manage multiple elevator cab manufacturing and installation projects.Coordinate timelines from design approval through fabrication and installation.Communicate

Product Development Project Manager.Garden City, New York (Office Based).Talento has partnered with one of North America's leading vertically integrated manufacturer of sexual wellness products.We are looking for a highly skilled.Product Development Project Manager.This person is highly organized an

The Administrative Assistant is responsible for all tasks involving the front office and reception area, including proper handling of all incoming calls, incoming mail, and visitors.It is also his/her job to organize and maintain the corporate calendar.This individual is also responsible for maintai

The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks.A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role.Handle and coordinate active calendars.Ensu

Administrative Assistant / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Data Entry Clerk at LV Petroleum, you will: Enter and maintain accurate data into company databases; Verify the accuracy of data entries for completeness and compliance with company stan

Domani Consulting provides a comprehensive range of compliance services tailored for property owners and developers.The company excels in navigating the complexities of the New York City Building Code, Department of Buildings (DOB) protocols, and offers expertise with agencies such as DOT, FDNY, and

Global asset management firm located in Midtown, Manhattan is seeking to hire a Temporary to Permanent Receptionist/Administrative Assistant to provide primary reception and administrative coverage for the office.They will also provide general office and facilities support.The position reports direc

This role is responsible for overall project execution—including.The Project Manager serves as the primary point of contact for owners and project partners and works in close coordination with the.Superintendent(s), Project Engineer(s), and leadership team.Project Managers report to a company owne

A validation and quality assurance provider is looking to hire a Project Engineering Manager for their Albany, NY project site.This is a 6-to-24-month assignment with possible extension.This unique group works to develop and blueprint a universally implemented validation process that reliably achiev

Applicants must have prior experience working in an HVAC subcontractor office.Candidates without relevant HVAC subcontractor experience will not be considered.Minimum of 3 years of HVAC industry experience.Minimum of 3 years of construction experience.Minimum of 3 years of project management experie

Administrative Assistant / Remote] - Anywhere in U.Competitive Pay - As a Data Entry Clerk you'll: Transfer data from various sources into the new database; Update databases or records with new information as it becomes available; Correct and modify inaccurate files and records; Comply with security

Nassau County with travel through NY Metro and Long Island.An established, high-revenue design-build contractor with a decades-long reputation for excellence is seeking a Civil Project Manager to lead site development and civil infrastructure scopes across complex commercial and high-end projects.Th

Administrative Assistant / Fully Remote] - Anywhere in U.Competitive Hourly Pay + Paid Training - As a Data Entry Clerk (Driver Enrollment), you'll: Review applications as well as insurance and vehicle registration documents for accuracy and eligibility; Conduct virtual vehicle safety inspections w

Do you have the right skills and experience for this role Read on to find out, and make your application.Mechanical Engineer/Project Manager.We have an immediate need for a.Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked amo

Farmington, NY | Full-Time | $23–$29/hour.A respected construction and infrastructure contractor serving clients across New York State is seeking a dependable.Farmington office running smoothly.This role supports day-to-day operations and provides administrative assistance to management in a fast-

While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required.Construction Project Manager (Healthcare).We are seeking a talented and experienced.Long Island area with experience overseeing high-profile.Com

Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required.Senior Construction Project Manager (Healthcare).We are seeking a talented and experienced .Senior Construction Project Manager.Long Island area with

Perform various clerical and administrative duties.Maintain customer account agreements, vehicle files, verification of title information, records of the completion of reconditioning work, and other required information.Ensure payment for billings or accounts receivable are received on time and post

Ready to join a fun, growing athleisure brand? GOAT USA is looking for an exceptional IT Project Manager to lead and deliver technology initiatives that support our apparel retail and wholesale business.In this role, you will manage cross-functional IT projects from planning through execution, ensur

Project Manager for Epic Systems Revenue Cycle.We are seeking a highly skilled and experienced Project Manager to join our Project Management Office (PMO) within the IT department.The ideal candidate will have extensive experience in front and back-end revenue cycle workflows and Electronic Health R

Patient Care Coordinator (Administrative Assistant).Franklin Square and Fresh Meadow, New York.Beltone: MLM Hearing-Audiology Resources is a well-established leader in hearing healthcare, operating since 1976.With over 155 clinics across the U.The Patient Care Coordinator (PCC) is the first point of

Performs diversified clerical duties related to the operational needs of the office/department.Performs diversified clerical duties which may include, but are not limited to: Typing various correspondence, reports, articles; Greeting and directing visitors; Answering telephones, taking messages, dir

Administrative / Customer Service Representative.Location: Plainview, NY Schedule: MondayFriday, 9:00 AM5:00 PM Pay Rate: $25$28 per hour Type: Temp-to-Hire.We are seeking a reliable and detail-oriented Administrative/Customer Service Representative to support daily office operations.This is a temp-

On-Site Position In Roslyn, NY.General Summary: Provide a high level of administrative support to senior leadership in Underwriting.This role serves as a trusted partner to leadership, enabling them to operate efficiently by managing complex administrative priorities, coordinating appointments, and

Performs diversified clerical duties related to the operational needs of the office/department.Performs diversified clerical duties which may include, but are not limited to: Typing various correspondence, reports, articles; Greeting and directing visitors; Answering telephones, taking messages, dir

Francis Hospital, The Heart Center is New York State's only specialty designated cardiac center.A member of Catholic Health, St.Francis is consistently recognized by U.News & World Report as a national leader for Cardiology & Heart Surgery, as well as for Gastroenterology & GI Surgery.Francis as hig

Store - Albany-Clifton Park, Ny.Deliver friendly customer service, help customers shop our store, and find what they're looking for.Ensure all customers receive a fast and friendly checkout experience.Complete truck unloading and merchandise duties throughout the store including maintaining store re

Performs complex diversified clerical duties related to the operational needs of the office/department.Performs complex administrative duties which may include, but are not limited to: Typing various correspondence, reports, articles; Greeting and directing visitors; Answering telephones, taking mes