Industrial manufacturing jobs in Elizabeth, New JerseyCreate job alerts

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Job Description: We are hiring Maintenance Technicians at multiple skill levels (A, B, and C) for our facility in [Location]. These roles offer a great opportunity for candidates with different levels of experience in industrial maintenance, troubleshooting, and equipment repair. Responsibilities (Vary by Level): Tech A: Lead complex maintenance projects, supervise techs, and perform advanced troubleshooting on electrical, mechanical, hydraulic, and pneumatic systems. Food manufacturing experience is required. Tech B: Troubleshoot automation systems, electrical/mechanical components, and assist with preventive maintenance. Food manufacturing experience is a plus. Tech C: Perform routine maintenance, assist in troubleshooting, and support facility operations. Food manufacturing experience is nice to have but not required. Qualifications: Tech A: 3+ years of food manufacturing maintenance experience, PLC troubleshooting, supervisory skills. Tech B: 3+ years in industrial maintenance, experience with automation and controls. Food manufacturing experience is preferred. Tech C: High school diploma/GED, & 1+ years in industrial maintenance, mechanical aptitude, willingness to learn. Food manufacturing experience is a plus but not required.

Job DescriptionBenefits: • Competitive salary, • Training & development We are seeking a skilled and reliable Facilities Technician to support the daily operation, maintenance, and repair of our refrigerated food production facility. The ideal candidate will have strong hands-on experience in facilities maintenance, mechanical/electrical troubleshooting, and preventive maintenance in an industrial or food manufacturing environment. Objectives of this Role Assists with maintaining building security and immediately responds to building emergencies during scheduled shift Monitors and replaces light bulbs in all assigned facilities, as needed Assists with departmental and employee moves Hangs pictures and shelving, as needed Dismantles and installs furniture Transports goods or equipment as assigned Performs other maintenance duties as assigned by the Facilities Maintenance Manager Responsible for all powered equipment, unscheduled maintenance and preventive maintenance Provides immediate assistance to automated production equipment, troubleshoot issues and Skills and Requirements Must be mechanically inclined, with a safety-first mentality Must have a Can Do Attitude and be Self-starter as well as a team player Must be able to take direction as well as ownership of given tasks Understand and follow oral and written instructions Ability to prioritize and manage multi-functional tasks Ability to work effectively under pressure, and against strict time constraints Ability to use standard powered and non-powered tools Must be able to utilize/view a PC and/or monitor Must be able to walk, bend, stand and reach for extended periods of time Must be comfortable and able to work at heights of 20 feet Must be able to work independently without direct supervision Able to work in a refrigerated environment most of the day Must be able to lift up to 49 pounds with or without reasonable accommodation Must be willing and able to work in a refrigerated environment (10-40) Must be able to stand/walk for up to 10-12 hours with or without reasonable accommodation Must be willing and able to frequently push, pull, squat, bend, and reach with or without reasonable accommodation. Working Conditions: Work is primarily conducted in the office and food production environment. This position may require night, holiday and/or weekend work.

The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Job Title: Mach

Job DescriptionSalary: Per Diem | $17/hour Join the Team Behind the Leotard Gymnasts Love Now Hiring: Per Diem | Seamstress/Sewer Plum is a New Jersey-based innovator in gymnastics apparel, proudly designing and producing colorful, comfortable, and affordable leotards that deliver confidence, durability, and style to athletes at every level. Founded in 2011, we believe every gymnast is a champion from day oneand we design our collections to celebrate that journey. Our in-house Product Design and Production team is based in our New Jersey office, and much of our production takes place right here on the East Coast. Were known for our limited-edition runs and quarterly product drops that keep gymnasts and pro shops stocked with trendy, ready-to-ship gear. Were currently seeking a Seamstress/Sewer to join our team. This role is responsible for sewing product samples and small production runs from provided patterns. Working closely with our design team, youll help refine patterns and ensure each garment is made with care, precision, and manufacturability in mind. This position requires: • Strong sewing and garment construction skills, • Attention to detail and craftsmanship, • Clear communication and a collaborative mindset Essential Job Functions Responsibilities include, but are not limited to: • Construct top-quality sample garments of new and current design samples., • Construct top-quality small production runs., • Sew using industrial sewing machines: straight-needle, serger, double-needle, and cover-stitch machines., • Sew different hems, pockets, shirring, and setting binding with rubber or elastics., • Understand design specifications and the ability to read tech packs to determine the step-by-step order of operations needed to execute., • Work closely with the design development team to provide input and suggestions to improve productivity and product quality., • Measuring garment specifications, • Support the team as needed with areas such as fit, measurements, specs, construction, and other related tasks. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Job Qualifications • Experience working in the apparel manufacturing industry, specifically with swimwear, intimates, and activewear., • Ability to receive projects and process promptly while understanding priority needs and meeting deadlines., • High level of attention to detail in sewing, finishing, and completing samples., • Must be at least 18 years of age., • Must be able to work independently with minimal guidance., • Ability to multitask, prioritize, and manage time effectively., • Must have reliable transportation., • Ability to speak, read, and write English., • Proficiency with basic computer functions (email, time tracking, document retrieval, etc.), • Ability to remain at the workstation for extended periods., • Ability to move equipment and inventory weighing up to 20 pounds., • Ability to maintain a composed and professional demeanorwithin a flexible and (at times noisy) work environment., • Ability to move throughout all areas of the facility, including but not limited to distribution, office areas, and manufacturing environments, including the outside perimeter of the building., • Ability to move throughout gymnasiums and event floors., • Visual acuity corrected to perform job functions. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other factors prohibited by law.

Job Description General Manager Flexline, Kenilworth NJ Who are we Founded in 1888 in Baltimore, TIPCO Technologies has been at the forefront of innovation and industry leadership for over a century. Today, with locations across the U.S., we’re proud to offer more than just jobs—we cultivate careers. At TIPCO, we champion growth, promotion, and opportunity. If you’re ready to thrive in a forward-thinking, stable, and growth-oriented environment, we want you on our team! Why Join TIPCO? We’re more than a company—we’re a legacy of innovation and a future built on bold ideas. Be part of a culture where your ideas matter, your contributions are valued, and your career can flourish. What you’ll do We are seeking a proven, dynamic General Manager to lead a strategically critical division focused on specialty assembly manufacturing and product distribution within a leading digital service provider, offering fluid conveyance solutions that empower industries to achieve their full potential. This individual will assume full P&L responsibility and drive performance across all functions—including operations, sales & marketing, sourcing, and engineering—while ensuring world-class customer satisfaction, profitability, and growth. This role requires a hands-on leader with a strong sense of ownership, a strategic mindset, and the ability to thrive in a fast-paced, precision-driven environment. A Day in the Life • Bachelor’s degree in engineering, Business, or a related field (or equivalent experience)., • Minimum 10 years of progressive leadership experience in Sales, Engineering, Operations, or Marketing, preferably within industry or aerospace or a related precision manufacturing environment., • At least 5 years of General Management experience, ideally in a mid-market or growth-stage company., • Demonstrated ability to thrive in a fast-paced, high-pressure environment requiring high attention to detail., • Proven strategic thinker with a strong bias for action and results., • Inspirational leadership style with a track record of developing high-performance teams., • Strong communication, financial acumen, and cross-functional collaboration skills., • Physical ability to lift, push, and pull up to 150 lbs. and perform tasks requiring manual dexterity., • The noise level in the work environment is usually moderate., • Health, Medical, Dental, • 401k, • Company Bonus Structure, • Life insurance, • Pet Insurance, • EAP

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Education: • Minimum – High School Diploma, • Preferred – Vocational School Graduate, • Perform assembly and performance testing of electro-mechanical fluid control devices. Comply with essential procedures, blueprints, and associated schematics to ensure safety and quality of product., • Operate, develop, and maintain high pressure test systems, to include pneumatic, hydraulic, and calibration fluid test stands and pumps., • Experience analyzing blueprints and developing procedures., • Demonstrated ability to assemble electro-mechanical hardware., • Experience with high pressure testing with various fluids and gases., • Ability to conduct electrical tests including, dielectric and insulation resistance testing., • Experience soldering to Class B standards. Class A experience preferred., • Computer literacy, Microsoft office, word, and excel experience., • Experience operating in controlled clean-room environments., • Experience conducting clean-room particulate analysis and data collection., • Manufacturing processing experience or machining experience a plus., • Ability to operate diagnostic testing equipment: Oscilloscopes, Lab View, etc., • Ability to systematically troubleshoot and repair hardware., • Ability to lift/move up to 50lbs., • Team oriented and willingness to work in a diverse team environment., • Ability to collaborate in cross-functioning teams to meet customer expectations., • Ability to work independently, without direct supervision., • Willingness to train and mentor junior technicians., • Ability to travel 5% - 10% to local vendor locations Why Join Valcor Engineering? • Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy., • Team-Focused Culture: Work with a skilled, collaborative group of industry pros., • Career Growth: Opportunities to develop and move up in a growing company. Salary Range:$29.00 To $45.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionDescription: We are a leading, family-owned industrial distributor—a critical link in the supply chain that keeps the industry running. For over 70 years, we’ve specialized in connecting world-class manufacturers with customers that rely on their products. Industrial distribution is the business of sourcing, stocking, marketing, and delivering a broad range of essential industrial products- from safety equipment to material handling solutions. It plays a vital role in ensuring operational uptime, cost control, and reliability across sectors like manufacturing, construction, utilities, and government. We represent some of the most trusted brands in metalworking, safety, MRO supplies, material handling, and piping products. What sets us apart is not just the products we deliver- but how we deliver them. Through technology, people, and service, we are transforming the industrial distribution industry into one that is more efficient, and obsessively customer focused. About the Role The Procurement Manager oversees the purchasing function, manages a small team, ensures accurate and timely purchase order processing, optimizes ERP workflows, drives cost savings, and negotiates and strengthens relationships with key vendor partners. This role is ideal for someone who thrives in a fast-paced industrial distribution environment and can balance strategic thinking and analytics with hands-on execution. Key Responsibilities · Manage daily purchasing activities and manage a team of buyers · Monitor and manage purchasing queues to ensure timely processing of purchase orders and vendor follow-ups. · Maintain purchasing data integrity, including lead times, pricing, vendor files, and stock parameters. · Optimize ERP purchasing workflows (Epicor Eclipse preferred) to improve automation, reduce errors, and increase efficiency. · Troubleshoot internal purchasing issues and collaborate with sales, operations, and inventory control. · Develop and maintain strong vendor relationships to support service, pricing, and supply-chain reliability. · Lead vendor negotiations on price, terms, delivery, and escalations. · Analyze purchasing trends and recommend improvements to drive cost savings and operational performance. Requirements: · 5+ years of purchasing or procurement experience, ideally within industrial distribution or related industries. · 3+ years of management or supervisory experience. · Working knowledge of ERP purchasing processes (Epicor Eclipse a strong plus). · Strong mathematical, analytical, problem-solving, and troubleshooting skills. · Excellent communication skills and ability to manage cross-functional relationships. · Detail-oriented with a continuous improvement mindset.

Job DescriptionDescription: Position Summary Lincoln Electric Products Co. Inc. is seeking a highly motivated and experienced Master Scheduler to join our team in Union, NJ. The Master Scheduler is responsible for developing, maintaining, and optimizing the master production schedule to ensure that customer demands are met efficiently while maximizing the use of manufacturing resources. This role serves as the key link between sales, production, purchasing, and inventory control — ensuring that production activities are aligned with company goals for delivery, quality, and cost. The ideal candidate is analytical, detail-oriented, and experienced in manufacturing planning systems, with strong communication skills and the ability to balance multiple priorities in a fast-paced environment. While this role primarily operates Monday through Friday, occasional Saturday work may be required based on business demands. This full-time, exempt position reports directly to the COO: Chief Operations Officer. Working Conditions: • Office and plant floor environment., • Requires frequent interaction with production, engineering, and operations teams. Key Responsibilities • Develop and maintain the Master Production Schedule (MPS) based on demand forecasts, customer orders, inventory levels, and capacity constraints. • Analyze material availability, production capacity, and lead times to ensure schedule feasibility., • Collaborate with sales, operations, procurement, and engineering teams to align scheduling priorities with business objectives. • Monitor work order progress, identify bottlenecks, and proactively adjust schedules to minimize downtime and ensure on-time delivery. • Communicate production priorities and changes to cross-functional teams daily or weekly as needed., • Drive continuous improvement in scheduling accuracy and efficiency by analyzing performance metrics and implementing process enhancements. • Manage the balance between inventory levels, production throughput, and customer satisfaction., • Coordinate with procurement to ensure timely availability of raw materials and components., • Maintain data accuracy within the ERP/MRP system and provide key performance indicators (KPIs) on schedule adherence and capacity utilization. • Support new product introductions and engineering changes by integrating them into the production plan. • Develop “what-if” capacity analyses to support decision-making and long-term planning. Requirements: Job Requirements: Education & Experience • Bachelor’s degree in operations management, Supply Chain, Industrial Engineering, or related field (preferred)., • 5+ years of experience in production planning, scheduling, or materials management, preferably in a manufacturing environment., • Strong knowledge of ERP/MRP systems (e.g., SAP, Oracle, Epicor, JobBOSS, etc.)., • APICS/CPIM certification is highly desirable., • Knowledge of Acumatica Skills & Competencies • Exceptional analytical and organizational skills with strong attention to detail., • Proven ability to manage multiple priorities under tight deadlines., • Excellent communication and interpersonal skills for cross-department collaboration., • Proficiency in Microsoft Excel and data analysis tools., • Understanding of lean manufacturing principles and continuous improvement methodologies., • Strong problem-solving and decision-making abilities Performance Metrics • Schedule adherence (% on-time production completion), • On-time delivery rate to customers, • Inventory turns and WIP levels, • Production efficiency and utilization, • Accuracy of forecast vs. actual production

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Industrial Designer Elizabeth, NJ | Full-time Responsibilities: * Develop and refine designs for truck accessories (bumpers, visors, custom panels, etc.). * Create accurate 2D drawings and 3D models (AutoCAD, Inventor, or similar). * Prepare DXF files for laser cutting and ensure designs meet production requirements. * Collaborate with the fabrication team to ensure feasibility and accuracy. * Assist in prototyping, testing, and adjusting designs as needed. * Maintain organized design files, drawings, and part numbers. * Stay updated with trends in truck design and customization. Requirements: * Bachelor’s degree in Industrial Design, Mechanical Design, or related field (or equivalent experience). * Proficiency with CAD software (Autodesk Inventor, AutoCAD, or SolidWorks). * Strong understanding of manufacturing processes (laser cutting, welding, bending, etc.). * Creativity with an eye for detail and aesthetics. * Ability to manage multiple projects and meet deadlines. * Experience in the automotive/trucking industry is a strong plus. * Spanish is a requirement Company DescriptionAbout Us Tony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.About Us\r\nTony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.

Job Description Warehouse Manager (Night Shift) Location: Newark, NJ Hours: 5:00 PM – 3:00 AM Employment Type: Full-Time Compensation: $115,000 – $150,000 (based on experience) Benefits Eligibility: After 60 days Description We're seeking a driven and emotionally intelligent Night Shift Warehouse Manager to lead our Overstack Department, ensuring that all shelves and inventory are fully replenished and production is supplied for the next day's operations. This position plays a vital role in maintaining a smooth, continuous flow of materials throughout the night shift—supporting production needs and keeping the facility running efficiently and safely. The ideal candidate combines hands-on operational leadership with the ability to motivate, guide, and communicate effectively with a diverse night team. Requirements • Minimum of 3 years of supervisory or management experience in manufacturing, logistics, or production., • Strong understanding of production processes, workflow, and safety protocols., • Proven ability to inspire and motivate teams in high-volume operations., • Excellent communication, organization, and problem-solving skills., • Mechanical aptitude and familiarity with industrial machinery and equipment., • Demonstrated emotional intelligence and leadership presence., • Sense of urgency and adaptability in fast-paced environments. Responsibilities • Lead, supervise, and motivate a team of approximately 50–70 night shift employees., • Oversee replenishment of all shelves and inventory emptied during the day shift., • Ensure readiness for next-day production through efficient organization and workflow., • Monitor production flow, addressing bottlenecks or delays immediately., • Coordinate closely with day shift management for seamless transitions and handoffs., • Maintain compliance with all safety standards and perform regular safety checks., • Supervise machinery and equipment functionality, minimizing downtime in collaboration with maintenance teams., • Track attendance, productivity, and KPIs to drive continuous improvement., • Coach and mentor team members to build accountability, engagement, and growth., • Resolve personnel issues calmly and fairly, promoting a positive, team-oriented environment. Benefits After 60 days of employment, employees are eligible for a full benefits package, including: • Medical, dental, and vision insurance, • Paid time off and holidays, • 401(k) with company match, • Employee discounts and advancement opportunities, • Supportive, collaborative work culture that values teamwork and innovation Final Invitation to Apply This is an exciting opportunity for a hands-on, people-first operations leader ready to make a measurable impact on overnight production performance. If you thrive on structure, momentum, and team success, we'd love to hear from you. Email Resume: Apply Online: Refer a friend, get up to $1000!

Job Description The L2 Automation Plant Engineer (Sea Vision) is responsible for the ongoing support, maintenance, and optimization of the plant's automation and control systems, with a specific focus on the Sea Vision serialization platform and associated machine vision systems. This role ensures maximum efficiency, compliance with industry regulations (e.g., GMP, FDA), and minimal downtime in a high-volume manufacturing environment. The engineer operates as a subject matter expert for assigned automation areas and may lead small to medium-sized projects or support larger capital initiatives. Requirements System Support and Troubleshooting: Provide 24/7 technical support for L2 automation systems, performing root cause analysis and resolving hardware and software issues with minimal guidance. Sea Vision Expertise: Serve as the primary Subject Matter Expert (SME) for the Sea Vision serialization and vision inspection systems, including configuration, programming (if required by the specific system setup), and troubleshooting. Maintenance and Optimization: Develop and manage plans to maintain and improve existing process control systems and vision technologies to enhance performance, reliability, and efficiency. Project Execution: Lead or support the implementation of new automation solutions, system upgrades, and interfaces, ensuring all work is executed in coordination with production schedules and change management standards. Validation and Compliance: Assist in the preparation and execution of Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning, and validation protocols (CSV) to ensure compliance with cGMP and regulatory standards. Documentation and Training: Develop and maintain detailed documentation, including User Requirements Specifications (URS), Functional Specifications (FS), Detailed Specifications (DS), SOPs, and training materials for end-users and maintenance staff. Collaboration: Work closely with cross-functional teams, including Manufacturing, Quality Assurance, IT, and maintenance personnel, to ensure seamless integration and alignment of automation activities with business goals. Vendor Management: Manage vendor service contracts and coordinate with suppliers for technical clarifications, support, and new technology evaluation. Required Skills & Qualifications: Education: Bachelor’s degree in engineering (Electrical, Mechanical, Automation, or Computer Science) or a related technical field. Experience: 4-6 years of experience in an automation or manufacturing support role, preferably within the pharmaceutical, biotech, or similarly regulated industry. Technical Knowledge: Proficiency with industrial control systems (PLCs, SCADA, HMIs) (e.g., Allen-Bradley, Siemens). Direct experience with Sea Vision serialization software and associated machine vision hardware (cameras, lighting, optics). Strong understanding of network protocols and IT/OT integration in a plant environment. Problem-Solving: Strong problem-solving skills to identify and resolve operational and quality issues efficiently. Attention to Detail: A high level of attention to detail to ensure accuracy in serialization, documentation, and quality control. Communication: Excellent written and verbal communication skills to effectively communicate with team members and management. Compliance Knowledge: Understanding of safety regulations, GMP, and relevant industry standards (e.g., 21 CFR Part 11).

Job Description Plant Manager Local HEAVY industrial plant has an immediate need for a Plant Manager with at least 10 years of experience in coal, waste to energy or power generation industry along with a proven background in leadership to oversee the day-to-day operations as well as meeting the long term objectivesEssential Qualifications: • Specifically seeking candidates with solid fuel experience—ranging from coal waste to energy biomass and other solid materials such as wood chips, paper pulp, and nutshells., • The key requirement is hands-on experience with solid fuels., • Proven track record in planning and executing facility outages efficiently, ensuring adherence to Safety, Quality, Delivery, and Cost (SQDC) commitments., • Bachelor's degree in engineering, technical, or business required, • Experience building and maintaining a culture of environmental and safety excellence., • Well versed in environmental compliance, • Develop and manage budgets, • Oversee safe execution of outages, • Proficient in developing sustainable facility budget forecasts to maximize financial contributions., • Provide excellent leadership to encourage a culture of collaboration and safetyCompany DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description Salary: $100000 - $135000 Pay Grade: 16 Other Forms of Compensation: ESFM is the corporate facilities management (FM) division of Compass Group USA, a Gold-level Corporate Sustaining Partner of the International Facility Management Association (IFMA), and a Platinum Corporate Member of the Association of Energy Engineers (AEE). ESFM self-performs 80% of all FM services provided to clients. Our portfolio of solution categories includes Facilities Maintenance & Engineering, ESG Programming, Laboratory Support Services, Janitorial & Industrial Cleaning, Landscaping & Grounds Management, Workplace Solutions and Managed Services. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. ESFM’s clients include many household names from the life sciences, technology, oil & gas and manufacturing markets. Job Summary We are seeking an experienced Chief Engineer to lead and manage all hard facilities operations and maintenance activities within our facility. This critical role ensures the smooth functioning of scientific, production, and formulation equipment while supporting soft services such as custodial operations, client-facing staff, and grounds maintenance. If you thrive in a fast-paced, production-oriented environment and have a passion for operational excellence, we want to hear from you! Key Responsibilities • Lead and oversee all hard facilities operations and maintenance activities., • Troubleshoot electrical equipment and PLC systems., • Manage mechanical services for facilities and scientific areas (FMO support)., • Repair and maintain facility, production, and formulation equipment through preventive maintenance programs., • Coordinate fabrication of machine parts to maintain operational efficiency., • Ensure compliance with OSHA and facility safety standards., • Install and maintain systems supporting facility operations (DI water, compressed air, chilled water)., • Assist with equipment setup and disassembly based on production schedules., • Partner with outside vendors and manage new equipment installations., • Maintain instrument calibration using CMMS systems (e.g., ARCHIBUS)., • Manage spare parts inventory to minimize downtime., • Source parts and equipment as needed., • Support administrative tasks related to ordering and closing work orders., • Participate in safety programs (JSA, SHAP, MESUR, EHS inspections)., • Provide technical support to Demi-Grand, Pilot, and Lab operations., • Oversee BMS programs and support facility mechanics. Capabilities & Technical Skills • Advanced knowledge of air conditioning, refrigeration, and heating principles., • Working knowledge of boiler systems., • Proficiency in balancing air and water treatment systems per HVAC protocols., • Skilled in mechanical and electrical installation of equipment., • Strong troubleshooting skills for electrical equipment and PLCs., • Familiarity with OSHA safety standards and compliance requirements. Qualifications • Bachelor’s degree in engineering., • 7+ years of experience in facilities engineering or maintenance., • Strong leadership and communication skills., • Ability to excel in a fast-paced, production-oriented environment. Apply to ESFM Services today! ESFM is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Eurest Services maintains a drug-free workplace. Associates at ESFM are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Req ID:1466569 ESFM Julia Lari

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description URGENTLY HIRING Electro Mechanical Maintenance Technician (All Shifts Available!) Send your resume to jpiacquadio @ aerotek.com for the fastest response! Pay: $36 - $39 per hour Shifts: 1st, 2nd, and 3rd (apply for shift times) Location: New Brunswick, NJ Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use multimeters, oscilloscopes, and other diagnostic tools., • Follow SOPs and maintain clean, safe workspaces., • Experience in industrial maintenance or electro-mechanics., • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to troubleshoot and work independently under pressure., • Familiarity with CMMS systems and Microsoft Office., • Electrical systems knowledge and ability to read electrical schematics., • Associate’s degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience is acceptable for some roles., • Experience in a manufacturing or food production environment., • Prior work with automated or robotic systems is a plus. Join a fast-paced, team-oriented environment with a global impact. We offer a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including medical, dental, vision, life insurance, 401(k), FSA, and STD/LTD. Enjoy paid time off and career development opportunities. Job Type & Location This is a Contract to Hire position based out of Westfield, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Westfield,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are looking for a Supply Chain Manager who will drive and implement purchasing process improvements to support business goals, with a strong emphasis on cost-reduction initiatives, inventory management, and continuity of supply. This role requires exceptional project management and interpersonal skills, collaborating closely with engineering, product development, marketing, manufacturing, and material planning teams. Key Responsibilities: • Must have demonstrated experience buying commodities and managing supplier relationships., • Facilitate the purchase requisition process and issue purchase orders per company policy., • Negotiate pricing, delivery dates, and PO terms and conditions., • Manage physical inventory process: setup meetings, scheduling, inventory sheets, input coordination, and discrepancy analysis., • Oversee day-to-day purchasing team operations: supplier interface, rush orders, onboarding, international processes, expediting, workflow, and personnel matters., • Identify and lead supplier cost-saving opportunities while maintaining quality and service standards., • Develop preferred supplier programs and conduct regular performance reviews., • Support engineering and operations with new product testing and cost-reduction initiatives., • Evaluate and implement Manufacturing Alerts and Engineering Change Notifications., • Provide periodic supplier performance reports and monthly executive KPI dashboards. Qualifications: • Bachelor’s degree in business, supply chain management, or a related field., • APICS/ISM certifications highly preferred., • Minimum 7 years of experience in supply chain operations, ideally in an industrial or commercial manufacturing environment., • Proven success in commodity purchasing, sourcing, and contract negotiation., • Prior supervisory experience strongly preferred., • Strong analytical and process-oriented mindset., • Ability to drive measurable results in a fast-paced manufacturing setting., • Experience with ERP systems related to purchasing (Oracle ERP is preferred ).

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Education: • Minimum – High School Diploma, • Preferred – Vocational School Graduate, • Perform assembly and performance testing of electro-mechanical fluid control devices. Comply with essential procedures, blueprints, and associated schematics to ensure safety and quality of product., • Operate, develop, and maintain high pressure test systems, to include pneumatic, hydraulic, and calibration fluid test stands and pumps., • Experience analyzing blueprints and developing procedures., • Demonstrated ability to assemble electro-mechanical hardware., • Experience with high pressure testing with various fluids and gases., • Ability to conduct electrical tests including, dielectric and insulation resistance testing., • Experience soldering to Class B standards. Class A experience preferred., • Computer literacy, Microsoft office, word, and excel experience., • Experience operating in controlled clean-room environments., • Experience conducting clean-room particulate analysis and data collection., • Manufacturing processing experience or machining experience a plus., • Ability to operate diagnostic testing equipment: Oscilloscopes, Lab View, etc., • Ability to systematically troubleshoot and repair hardware., • Ability to lift/move up to 50lbs., • Team oriented and willingness to work in a diverse team environment., • Ability to collaborate in cross-functioning teams to meet customer expectations., • Ability to work independently, without direct supervision., • Willingness to train and mentor junior technicians., • Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy., • Team-Focused Culture: Work with a skilled, collaborative group of industry pros., • Career Growth: Opportunities to develop and move up in a growing company. Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description • We are hiring immediately for a full time MECHANIC I position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior experience with supporting building equipment and process equipment is preferred., • Pay Range: $28.00 per hour to $45.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1481138. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, including HVAC systems, high-pressure boilers, generators and steam equipment. Reads and records information from meters and gauges at specified intervals to verify operating conditions. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines and equipment; maintains equipment inventory., • Sets up and operates mechanical equipment and small hand tools (e.g., drills, grinders welding torches) for machine and equipment repair., • Maintains clean and safe work environment; performs job safely., • Consistently demonstrates support of the department by striving for excellence., • Contributes to the team; exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description Job Title: Human Resources Director Classification: Full Time, Salary, Exempt Department: Human Resources Location: Kearny, NJ Direct Supervisor: President Job Summary: The Human Resources Director is responsible for leading all HR functions for Kuehne’s New Jersey headquarters and multi-site operations, overseeing a team of HR professionals. This role combines strategic leadership with hands-on execution, ensuring that HR programs support the organization’s mission, operational goals, and compliance obligations within a safety-sensitive, manufacturing environment. The Director serves as a trusted partner to senior leadership while maintaining close visibility into day-to-day HR operations, including recruitment, employee relations, compensation, benefits, performance management, compliance, and career development. Supervisory Responsibilities: • Leads, mentors, and develops the Human Resources team to ensure efficient execution of departmental functions., • Recruits, interviews, hires, and trains new staff., • Oversees the daily workflow of the Human Resources department., • Provides constructive and timely performance evaluations. Leadership & Strategy: • Collaborate with executive leadership to align HR programs with organizational objectives, workforce planning needs, and company values., • Lead and maintain Kuehne Company’s Three Pillars of Wellness programs:, • Physical Wellness: promoting health, safety, preventive care, and fitness initiatives., • Mental & Emotional Wellness: supporting access to counseling resources, stress management tools, open communication, and a supportive work culture., • Financial Wellness: managing benefits education, retirement readiness tools, and long-term stability planning., • Oversee full-cycle recruitment, onboarding, and workforce planning for all locations., • Develop and maintain competitive compensation, benefits, and incentive programs., • Maintain strict adherence to federal, state, and local employment laws, including OSHA, DOT, EEOC, FMLA, ADA, and TSA/TWIC-related requirements., • Develop, implement, and update HR policies, procedures, and employee handbooks., • Serve as a resource and advisor to managers and employees for conflict resolution, performance matters, and interpretation of policies., • Promote a respectful, equitable, and accountable workplace culture., • Manage HR systems, records, reporting, and departmental budgeting., • Manage and promote use of annual performance review software (Lattice) to promote a culture of continuous improvement and ensure employee engagement., • Recommend process improvements to enhance efficiency, data integrity, and employee experience., • Strong leadership and interpersonal skills, • Excellent verbal and written communication skills., • Excellent organizational, analytical, and problem-solving abilities., • Thorough understanding of HR policies, employment law, and best practices., • Ability to handle confidential information with discretion., • Proficiency in Microsoft Office Suite and HRIS platforms., • Must have reliable transportation., • Must be able to pass a 10-panel controlled substance test and participate in ongoing random testing., • Bachelor’s degree in Human Resources, Business Administration, or related field required., • Minimum of 8–10 years of progressive HR experience, with at least 5 years in leadership roles., • PHR, SPHR, or SHRM-CP, SHRM-SCP certified., • Experience in manufacturing, industrial, logistics, or similarly regulated environments strongly preferred., • Experience working in unionized environments, including familiarity with union rules, labor relations, and participation in negotiations., • This position requires occasional travel to various company sites., • Prolonged periods of working at a computer. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionJob Title: Diesel MechanicJob Description We are seeking a Diesel Technician to troubleshoot, diagnose, adjust, and repair equipment and vehicles. This includes working on electrical systems, brakes, hydraulics, cooling, power steering, engines, and other standard components. The role involves performing preventative and corrective maintenance independently, adhering to manufacturer and customer requirements. Responsibilities • Ensure the workplace follows 5S principles by maintaining a clean, organized, and efficient environment., • Independently carry out maintenance servicing on Ground Support Equipment (GSE) and/or Commercial Trucks following OEM specifications and company standards., • Transport GSE and/or Commercial Trucks safely and securely., • Diagnose and repair mechanical issues, including basic electrical repairs, on a range of GSE and/or Commercial Trucks., • Utilize manuals to look up necessary repair information., • Conduct thorough inspections, including checking vehicle hours, fluid levels, lights, and overall condition, to ensure safety and operational compliance., • Report and discuss any damage or work outside the prescribed scope with a supervisor., • Perform refurbishing tasks, including fabrication, body work, painting, welding, and upholstery., • Prioritize tasks effectively to maintain productivity and meet customer requirements., • Perform on-call responsibilities as required, responding promptly to urgent operational needs.Essential Skills, • Experience in preventive maintenance, hydraulics, diesel engines, and electrical systems., • Ability to diagnose and repair diesel and truck engines., • Strong knowledge of electrical, mechanical, and hydraulic systems., • Proficiency in using mobile devices and relevant applications.Additional Skills & Qualifications, • Valid Driver’s License required; CDL preferred but not required., • Must provide personal hand tools; specialized tools and diagnostic equipment are supplied., • A growth-oriented mindset with a collaborative team spirit. Health, Dental, Vision, STD/LTD, and Life Insurance, Employee Assistance Program (EAP) Vacation and Sick Leave, plus a 401K with matching contributions Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Staff Management Group is seeking a Sales & Marketing Specialist for our client in Elizabeth, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift, • Monday – Thursday: 8:30AM – 5:30PM, • Friday: 8:30AM – 1PM or 2PM (depending on business needs) Pay Rate: • $25 / hour Job Summary: We are looking for someone to support our client's online / e-commerce business. This person will be responsible for uploading product information to client web portals (similar to how sellers manage products on Amazon). Job Responsibilities: • Upload product images, descriptions, and item numbers to client e-commerce portals/websites., • Ensure all product information is accurate, complete, and formatted correctly., • Maintain and update online product catalogs as items change or new SKUs are added., • Track and organize product data using Excel., • Generate and analyze reports in Excel to support sales, inventory, and product performance. Job Requirements: • Strong Excel skills, including the ability to create and work with pivot tables., • Detail-oriented and highly organized when working with large amounts of data., • Comfortable working in online portals / e-commerce systems (experience with Amazon or similar platforms is a plus)., • Ability to follow instructions, meet deadlines, and work independently. Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionJob Title:Business Development Manager – Staffing & Recruiting (Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, Corporate Services) Reports To: Director of Business Development / VP of Sales Location: Remote / Hybrid Position Type: Full-time / Exempt Salary: $85,000 per year + performance based commission + Bonus About Us:Strike Force Staffing is a leading staffing and recruiting agency providing tailored workforce solutions across Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, and Corporate Services. We pride ourselves on delivering top talent to meet the critical needs of our clients. We are seeking a high-performing Business Development Manager (BDM) to drive growth and strengthen client partnerships in these sectors.Position Summary:The BDM is responsible for generating new business and managing client relationships within one or more of our key sectors: Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, or Corporate Services. This role involves the full sales cycle, from prospecting to contract negotiation, working closely with recruiters to ensure top-tier delivery.Key Responsibilities: • Identify, pursue, and secure new client accounts within target industries through prospecting, networking, referrals, and strategic outreach., • Develop and execute sales strategies tailored to sector-specific client needs., • Build relationships with decision-makers (e.g., hiring managers, HR, department heads, executives)., • Conduct needs analyses and craft customized staffing solutions (temporary, temp-to-perm, direct hire)., • Negotiate terms, pricing, and service agreements in alignment with company goals., • Partner with recruiters to ensure seamless client service and talent delivery., • Track pipeline, forecast revenue, and report activity using the CRM., • Represent the company at industry events, conferences, and trade shows.Requirements:Education:, • Bachelor’s degree preferred (business, marketing, human resources, or related field) or equivalent work experience.Experience:, • 3+ years of B2B sales or business development experience in staffing, recruiting, or workforce solutions., • Demonstrated success selling staffing services in at least one of the following:, • Light Industrial (e.g., warehouse, manufacturing, distribution), • IT (e.g., software development, infrastructure, support), • Healthcare (e.g., clinical, allied health, administrative support), • Accounting & Finance (e.g., CPAs, financial analysts, AR/AP), • Hospitality (e.g., food service, housekeeping, front desk), • Corporate Services (e.g., administrative, customer service, call centers), • Strong knowledge of contingent labor, direct hire, and workforce management models., • Experience managing the full sales cycle, from lead generation to contract execution.Skills & Attributes:, • Excellent communication, negotiation, and presentation skills., • Ability to build rapport and credibility at all organizational levels., • Goal-driven, with strong problem-solving abilities., • Organized, detail-oriented, and capable of managing multiple priorities., • Proficient in CRM tools (e.g., Salesforce, Bullhorn, Avionté) and Microsoft Office.Compensation:, • Competitive base salary + uncapped commission, • Performance bonuses, • Paid Time Off and Holidays, • Professional development and career growth opportunities.

Job Description Job Overview: A large Manufacturing plant in NJ is looking for a Senior Industrial/Process Engineer to lead efforts in optimizing production systems, improving workflows, and driving technical process innovations across our high-volume manufacturing plant. This role combines hands-on engineering expertise with strategic leadership, ensuring that operations run efficiently, safely, and at scale. The ideal candidate should bring strong technical capability, design and optimize facility layouts to maximize space utilization, streamline material flow, and support scalable production, and the ability to guide teams through continuous improvement initiatives. Key Responsibilities:  Analyze production schedules, workflows, and system specifications to maximize throughput, efficiency, and quality.  Design and optimize facility layouts, focusing on space utilization, equipment placement, and material flows.  Drive process upgrades, automation, and system enhancements.  Define and enforce technical and production standards with cross-functional teams.  Implement control systems that reduce downtime, cost, and variability.  Prepare cost models, equipment specifications, and capital expenditure justifications.  Act as a technical leader for the Continuous Improvement (CI) team, mentoring engineers and operators.  Train staff on new technologies, standards, and best practices.  Promote a data-driven, problem-solving culture across the plant. Qualifications:  Bachelor’s degree in industrial/Process Engineering or related field (required).  Significant experience in manufacturing process design, optimization, and improvement.  Advanced knowledge of production machinery, automation, and system layouts.  Strong technical skills, including, MS Office, and process modeling tools (with AutoCAD optional).  Proven ability to lead technical projects and elevate team capability.  Excellent analytical, communication, and leadership skills. Company DescriptionRecruiting CompanyRecruiting Company

Job Description About Us: NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. Position Purpose The Plant Manager provides leadership and guidance for the safe operation of the Sulfuric Acid Plant. There are up to 50 employees at each site and up to 25 resident contractors depending on the size and complexity of the site. There are differences between the products, inputs and markets between the plants. Primary Duties/Responsibilities (but not limited to): • Ensures that assigned plant operations demonstrate world-class performance, • Provides strategic leadership, management, and technical expertise to the organization., • Drives initiatives to foster a best-in-class safety culture., • Manages financial aspects of operations and understands the effect on financial performance., • Provides Process Safety Management leadership in a High Hazard Process environment, • Establish, sustain, and improve standard operating systems, • Champion operational discipline, • Foster an environment with open communication and feedback, • Drive high production capability though utilization of improvement programs and maintenance best practices, • Implement HR initiatives at the site, • Champion the High Performance Work Teams, • Represent the plant at public/industry groups (Community Advisory Panels, Manufacturing Associations), • Manage area personnel – provide mentoring and guidance for direct reports, and oversee training and development systems, • Work with the site employees to manage day-to-day operations, • Interface with the Supply Chain for coordination of production and shipping schedules, • Effectively communicate and interface with the Refinery/Customer when required, • Effectively utilize leveraged resources as required, • Accountable for total site cost and capital expenditures, • Accountable for being compliant with all corporate systems and processes, • Promote and support change in response to ongoing business needs, • Other duties as assigned Qualifications: • 4 year degree in engineering or equivalent, • Previous Management experience, • Process Safety Management Experience in a High Hazard Process facility, • 10 years of manufacturing experience in a chemical, refining or pharmaceutical industry, • Strong leadership skills and experience, • Exceptional interpersonal and communication skills both written and verbal, • Ability to set priorities and provide direction to influence management and the broader organization, • Demonstrated strong teamwork, collaboration and cross-cultural skills, • Demonstrated ability to create a respectful work environment where everyone can contribute to their full potential, • Root Cause Investigation, • Incident Investigation, • Business software (SAP, Excel, PowerPoint, etc.), • Six Sigma Certification is Preferred Benefits: NEXPERA's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.

Job Description Plan, direct and coordinate manufacturing processes. Develop, evaluate and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, lean tools and 6 sigma structured problem solving tools. Accountability: Coordinate engineering, technical and assembly procedures to produce the most economical manufacturing methods to accomplish optimum utilization of people, machines, tooling, equipment, facilities, quality and timely production. Relationships: Work closely with Engineering, Production Control and Manufacturing to provide engineering, technical and other advice and information relative to the design of fixtures, routings, methods and applications prescribed. Work with and assist QA, Manufacturing and Engineering to solve product / manufacturing problems. Work with Engineering to facilitate new product releases and existing product improvements. Job Description: (Estimated % of time) 33%: Support new product introductions. 33% Use 6 sigma structured problem solving methods to address product / manufacturing problems. 33%: Develop documentation of processes in the production area. Revise existing and create new documents, and update routings accordingly. Job Duties: • Strong understanding of Six Sigma and Lean manufacturing tools. Capable of utilizing these tools in developing manufacturing processes, assembly processes and cells., • Design complete fixtures for machining and Assembly Test Requirements, • Supervise the formulation of cost estimates and analyze actual operations costs to determine reasons for variances. Audit work performed by peers/subordinates to assure compliance and consistency with established method standards. Estimates production times, staffing requirements and related costs to provide information for management decisions., • Confer with planning and design staff concerning product design and tooling to insure efficient production methods., • Confer with manufacturing management and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production processes., • Apply statistical methods (SPC) to estimate future manufacturing requirements and potential., • Conduct continuous study projects on established methods to effect work simplification, tooling improvements, tooling requirements, work flow, reliability of equipment, etc. for purpose of manufacturing efficiency., • Develop, review and/or approve operation sheets for conventional CNC equipment to include both in-house and vendor production., • BS in Mechanical or Industrial Engineering or the technical equivalent., • Min 5 years of manufacturing engineering experience in a relatable assembly and test focused industry., • Solid project engineering, communication skills and cross functional team leader., • Ability to perform well in a fast paced, medium sized company environment., • 10+ years of relevant experience., • Six Sigma/Lean Manufacturing – Green Belt certification., • Some experience with ISO regulations. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job DescriptionCompany Description American Iron & Metal (AIM) is a family-owned company and recognized global leader in the metal recycling industry with more than 125 sites and 3500 employees worldwide. We have continued to prosper for the last eight decades (we just celebrated our 86th birthday!) thanks to the dedication of our employees and the ongoing trust and support of our customers. Become part of team AIM, a growing team with an entrepreneurial spirit who has over the years evolved into a successful and multifaceted company with business divisions that include metal recycling, decommissioning and demolition, auto-parts sales and recycling, manufacturing of solder assemblies, construction waste recycling, and production of customized industrial and mining products. We take pride in doing good things for the environment to help create a greener, more sustainable future for all. It’s simple; we do it right. We AIM for excellence. Job Description Exciting Opportunity: Become Our Next Account Manager! Are you ready to roll up your sleeves and make a hands-on impact in the metal recycling industry? We’re on the lookout for a physically active and dynamic Account Manager to join our dedicated team! In this role, you’ll engage directly with catalytic converter suppliers in your territory, ensuring we source these critical components at competitive prices while providing exceptional customer service. This is an opportunity to contribute to our company’s growth and success through direct, physical engagement in the field! Work Setup: Home-based office with frequent travel and on-site visits What You’ll Do: * Build Strong Partnerships: Forge and maintain robust relationships with both new and existing catalytic converter suppliers. Be the friendly face they can rely on for exceptional service and support, often in person. * Savvy Purchasing: Actively seek out potential suppliers to procure catalytic converters at advantageous prices, engaging in physical site visits to assess their operations and establish rapport. * Bid Management: Prepare and submit bids for quotes, calculating necessary resources and gathering data during on-site visits to ensure our offerings are competitive and compelling. * Supplier Insights: Regularly connect with suppliers face-to-face to understand their challenges and needs, fostering opportunities for mutual growth and collaboration. * Market Awareness: Stay informed about the latest market trends, competitor activities, and pricing developments through active field engagement to refine our purchasing strategies. * Negotiation Expertise: Evaluate catalytic converters based on market factors and conduct negotiations directly with suppliers during on-site interactions, ensuring beneficial terms for both parties. * Quality Assurance: Perform detailed inspections of purchased catalytic converters on-site to verify authenticity and compliance with regulations, ensuring accurate record-keeping. * Physical Inspection and Lifting: Safely lift and inspect catalytic converters to assess their condition and quality, ensuring that all purchased items meet our standards. * Data Analysis: Monitor sales data and market trends, providing regular reports and forecasts based on insights gained during your physical interactions with suppliers. * Team Collaboration: Work closely with our operations and logistics teams, ensuring smooth coordination of purchasing, processing, and shipping activities through direct collaboration. * Compliance Commitment: Stay updated on relevant regulations and compliance standards, ensuring our operations meet environmental and safety requirements through hands-on oversight. * Education & Guidance: Help suppliers and customers understand the value of recycling catalytic converters by providing support and guidance throughout the recycling process, often through in-person discussions. If you’re ready to take the next step in your career and make a tangible impact in the recycling industry, we want to hear from you! Join us in our mission to promote sustainability and drive success together! Qualifications To join our team: • Bachelor’s degree in business, Marketing, or a related field is preferred., • Proven experience in account management, business development, or sales, preferably in the metal recycling or automotive industry., • Strong knowledge of catalytic converters, their composition, and market dynamics is desired but not required., • Excellent negotiation, persuasion, and relationship-building skills to establish mutually beneficial partnerships with suppliers., • Analytical mindset with the ability to analyze market trends, pricing data, and sales performance., • Exceptional communication and presentation skills, both written and verbal., • Strong problem-solving and decision-making abilities to address supplier concerns and resolve issues effectively., • Proficiency in using customer relationship management (CRM) software, Microsoft Office, and data analysis tools., • Self-motivated and results-oriented, with the ability to work independently and meet targets., • Knowledge of environmental regulations and compliance related to metal recycling and catalytic converters is a plus Additional Information What we offer: • A competitive wage, commision package, vacation, benefits and a 401k matching program, • The tools and support needed to be successful in your career and professional development, • A dynamic & rewarding work environment, • Base Salary + Commission Pay, Full Benefit Package

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description • We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview., • Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required., • Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability., • Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment., • Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational., • Recommends appropriate sources of electrical power for new installations or renovation projects., • Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc., • Performs corrective maintenance in accordance with the work order system., • Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner., • Maintains clean and safe work environment; performs job safely., • Exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license., • Valid current state/local electrical license., • Two years of trade school or related experience., • Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation., • Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Sr Insurance Underwriter - Large Commercial Property - Bayonne, NJ Industry leader seeks an experienced Senior Market Facing Underwriter to analyze and underwrite large and complex commercial property business covering soft occupancy, industrial, manufacturing, and similar risks. CONSIDERED EXPERIEN

Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. As a Security Officer - Armed Manufacturing Patrol in Jersey City, NJ, you will serve and safeguard clients in a range of industries such as Manufacturing & Industrial, and more. Join a leading team where flexibility meets opportunity. As a Part-Time Security Officer, you can build a schedule that works for you and explore new roles using our Claim a Shift platform. Learn more: aus.com/earnmore. Join Allied Universal as an Armed Patrol Officer in a dynamic manufacturing and industrial location. You will conduct regular patrols, remain highly visible to help to deter security-related incidents, and provide outstanding customer service and communication. This is a driving and armed post, offering an engaging opportunity to support a secure environment while upholding our values of teamwork, integrity, and innovation. Position Type: Part Time Pay Rate: $20.00 / Hour Job Schedule: DayTimeFri10:00 PM - 06:00 AMSat10:00 PM - 06:00 AM Why Join Us: • Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more., • Career Growth: Get paid training and access to career growth opportunities., • Financial Benefits: Participate in our retirement savings plan to invest in your future., • Provide customer service to clients and visitors by carrying out security-related procedures, site-specific policies, and, when appropriate, emergency response activities., • Respond to incidents and critical situations in a calm, problem-solving manner, using appropriate judgment for an armed post., • Conduct regular and random patrols around the manufacturing facility and its perimeter to help to deter unauthorized activity and/or suspicious behavior., • Monitor access points and control entry to restricted areas within the industrial location., • Maintain awareness of surroundings and report any security-related concerns or hazards to Allied Universal management and/or client representatives., • Document incidents and daily activities as required by site protocols and Allied Universal standards., • At least 1 year of security-related experience is required., • A valid driver's license is required in accordance with Allied Universal driver policy requirements., • Be at least 21 years of age for armed roles., • Possess a high school diploma or equivalent., • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws., • Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law., • Participate in industry-specific security training programs., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment., • A valid driver's license will be required for driving positions only. Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: . If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . 2025-1495420

The Equipment Operator plays a critical role in the safe and efficient operation of heavy machinery used in construction, manufacturing, or other industrial settings. The operator ensures that all machinery is operated according to safety standards and company policies to minimize risks and maintain

About Company: At Denali, we are not just the leading organic recycling company—we are innovators in sustainability, dedicated to replenishing the Earth by Repurposing Waste. Denali operates nationwide, driving environmental and agricultural progress at scale. The work we do begins and ends with our employees, therefore, we strive to ELEVATE employees to be their best at work and at home. Join us on our mission to create a more sustainable future together. To learn more, visit denalicorp.com. Drive Innovation. ELEVATE Employees. Apply to join our team today! Equipment Operator Staten Island, NY / Bayonne, NJ / Perth Amboy, NJ Full-time / Hourly About the Role: The Equipment Operator plays a critical role in the safe and efficient operation of heavy machinery used in construction, manufacturing, or other industrial settings. This position is responsible for handling equipment such as bulldozers, cranes, forklifts, or excavators to support project completion within designated timelines. The operator ensures that all machinery is operated according to safety standards and company policies to minimize risks and maintain a secure work environment. Additionally, the role involves performing routine maintenance checks and reporting any mechanical issues to the maintenance team to prevent downtime. Ultimately, the Equipment Operator contributes to the overall productivity and success of projects by skillfully managing equipment and collaborating with team members. Minimum Qualifications: • Must have front-end loader experience., • High school diploma or equivalent., • Minimum of 1 year experience operating heavy machinery in a construction, manufacturing, or industrial environment., • Ability to understand and follow safety guidelines and operational procedures., • Additional certifications for specialized equipment such as cranes or forklifts., • Experience with preventive maintenance and minor equipment repairs., • Familiarity with reading and interpreting technical drawings or blueprints., • Strong communication skills to effectively collaborate with team members and supervisors., • Operate heavy machinery and equipment safely and efficiently according to project requirements and safety regulations., • Conduct pre-operation inspections to ensure equipment is in good working condition and report any defects or malfunctions., • Follow detailed instructions and blueprints to complete tasks such as digging, lifting, grading, or transporting materials., • Coordinate with supervisors and other team members to ensure smooth workflow and timely completion of assignments., • Perform routine maintenance and cleaning of equipment to extend its lifespan and maintain operational readiness., • Adhere strictly to all safety protocols and wear appropriate personal protective equipment (PPE) at all times. The required skills enable the Equipment Operator to safely and effectively control heavy machinery, ensuring tasks are completed accurately and on schedule. Attention to detail and mechanical aptitude are essential for conducting thorough equipment inspections and identifying potential issues before they cause delays. Communication skills facilitate clear coordination with team members and supervisors, promoting a safe and productive work environment. Preferred skills such as the ability to perform minor repairs and interpret technical documents enhance the operator's versatility and problem-solving capabilities. Together, these skills support the operator in maintaining equipment functionality and contributing to the overall success of project. Why You’ll Love Working at Denali-Benefits & Perks At Denali, the work we do begins and ends with you – our employees. That's why we strive to ELEVATE you to be your best, both at work and at home. Our benefits aren’t just about compensation; they’re part of a broader commitment to helping you thrive in all aspects of life. Here’s how we live out our values every day: • E – Employee: At Denali, we believe in offering competitive compensation packages that include not only great benefits but also a strong focus on safety, flexibility, and rewards and recognition. You are the backbone of our success, and we make sure you’re valued every step of the way., • L – Learning: We’re committed to your growth and development. Our Ascend Employee Development Program and access to over 6,000 professional courses via our Learning Management System empower you to climb higher in your career – all at no cost to you., • E – Environment: Our employees deserve a clean Earth. We’re dedicated to doing our part in keeping waste out of landfills, so you can be proud of the work we do together to make a positive environmental impact., • V – Valued: At Denali, we take pride in creating a culture of care. With resources that support your well-being, volunteerism opportunities, and a commitment to safe working conditions and inclusivity, you’ll always feel like you belong here., • A – Advancement: We believe in succession planning and providing opportunities for advancement. We want you to grow, and we’ll be right there with you, supporting your career every step of the way., • T – Together: We’re stronger when we work together. At Denali, you’ll have opportunities to give and receive support not just within the workplace, but within our broader community. Our team is united, and we celebrate the value of working and succeeding as one., • Comprehensive Medical: Our self-insured medical plans are designed with your health in mind, offering competitive options including copay and HSA plans so you can choose what best suit your health needs., • Dental & Vision: Keep your smile bright and your vision clear with full coverage for you and your family., • Generous 401(k) Match: We’re here for your long-term future – we offer a generous 401(k) match of up to 4%, helping you build the foundation for tomorrow., • Company-Paid Disability & Life Insurance: We’ve got you covered with company-paid Long-Term and Short-Term Disability, as well as AD&D and Life Insurance, giving you peace of mind knowing you’re protected., • Voluntary Life for Employees & Family: Customize additional coverage for you and your loved ones with our voluntary life insurance options., • Health Savings Plan: Save on medical expenses with a Health Savings Plan designed for your needs., • Paid Time Off (PTO) & Sick Time: We value your well-being. Take time for yourself, your family, and personal matters with generous PTO and Sick Time, including family leave., • 9 Paid Holidays: Enjoy a well-rounded work-life balance with 9 paid holidays throughout the year., • Paid Weekly: We believe in rewarding hard work consistently, which is why we offer weekly pay so you can stay on top of your financial goals., • Professional Development: Ascend in your career with free access to thousands of courses that allow you to grow and develop professionally., • Employee Assistance Program: Life can be challenging at times, and we’re here to support you with our confidential Employee Assistance Program that offers counseling and resources for a variety of personal and professional needs. Apply to join our team today! Equal Employment Opportunity Policy: It is the policy of the Company to provide equal employment opportunity for all employees. Accordingly, the Company will not engage in any form of employment discrimination based on race, color, national origin, gender, religion, age, disability, veteran or military status, genetic information, or any other legally protected status. The Company hereby affirms its desire to maintain a work environment for all employees that is free from all forms of unlawful employment discrimination. Compensation details: 24-27 Hourly Wage PI9f14ece440c5-37820-39225049

Job Description Description TITLE Senior Project Manager, PIM GENERAL SUMMARY OF POSITION The Senior Project Manager, PIM is a critical role responsible for driving an AnsellGUARDIAN data migration, review, and enhancement project that involves Product Information Management (PIM) systems, data integrity, and digital enablement. This position will play a central role in managing a complex, multi-phase data migration, review, and analysis project involving critical product and industry data that powers the AnsellGUARDIANTM safety algorithm. The role requires hands-on experience managing large-scale data initiatives, exceptional project planning and communication skills, and deep technical familiarity with Salsify PIM. The Senior Project Manager will be accountable for maintaining project momentum, coordinating cross-functional and global stakeholders, and ensuring timely delivery of high-quality, validated product data across the Ansell digital ecosystem. RESPONSIBILITIES • Project Planning & Execution, • Lead end-to-end planning and delivery of PIM-related projects, including data migration, data cleansing, and data validation activities., • Maintain and update detailed project action trackers, ensuring all deliverables, owners, and timelines are clearly defined and communicated., • Oversee daily and weekly project reporting, proactively identifying risks, dependencies, and roadblocks., • Coordinate testing, validation, and approval phases for all PIM data activities, ensuring readiness for integration with the Guardian platform., • Stakeholder Engagement & Communication, • Serve as the primary communication bridge between Digital, IT, Category Manager, Vertical Expert, and Guardian program teams., • Facilitate global meetings and steering sessions, summarizing progress, risks, and decisions for senior leadership., • Translate technical and data management topics into actionable updates for non-technical audiences., • Maintain transparent and timely communication across teams to support alignment, accountability, and informed decision-making., • Product Information Management Leadership, • Oversee data structuring, taxonomy management, and enrichment workflows within the Salsify PIM environment., • Partner with IT and business owners to design and execute efficient data migration processes from legacy systems to Salsify., • Support data governance and ensure compliance with industry standards, data models, and integration requirements., • Collaborate with the Platform Product Manager, AnsellGUARDIANTM, to align product data readiness with algorithmic and analytical needs., • Cross-Functional Collaboration, • Work closely with engineering, product, and regional commercial teams to ensure PIM data integrity supports digital sales, eCommerce, and Guardian capabilities., • Provide project leadership for third-party vendors, consultants, and regional data teams contributing to PIM projects., • Establish and continuously refine global best practices for PIM data management and project governance. KEY POSITION REQUIREMENTS Education • Bachelor’s degree in Business Administration, Information Systems, Engineering, or related field required., • PMP certification or equivalent project management credential preferred. Job Experience • 7+ years of experience managing large-scale digital, IT, or data projects., • Strong familiarity with Product Information Management systems, specifically Salsify PIM., • Proven track record in data migration, data governance, and change management projects., • Experience managing global cross-functional teams and external vendors., • Knowledge of industrial, manufacturing, or healthcare product data environments preferred Knowledge and Skills • Expert-level project management skills with proficiency in project tracking and reporting tools (e.g., Smartsheet, MS Project, Jira)., • In-depth understanding of Salsify data structures, workflows, and syndication., • Strong analytical mindset with the ability to evaluate large data sets for completeness and accuracy., • Excellent written and verbal communication skills; able to simplify complex information for broad audiences., • Ability to manage competing priorities in a fast-paced, global matrix environment., • Languages: Fluent English (written and spoken). DESIRABLE JOB COMPETENCIES • Ownership & Accountability – Takes proactive control of project outcomes, ensuring deliverables meet scope, timeline, and quality standards., • Communication & Transparency – Provides clear, concise, and consistent communication across stakeholders and leadership teams., • Technical Acumen – Demonstrates detailed understanding of Salsify PIM and related data integration processes., • Structured Problem Solving – Identifies issues early, proposes actionable solutions, and drives cross-functional alignment., • Collaborative Leadership – Builds productive relationships across functions and regions, fostering trust and shared ownership of results., • Global Agility – Adapts to time zone differences, cultural contexts, and evolving priorities with flexibility and professionalism. ADDITIONAL REQUIREMENTS • This is a 9-12 month contract role, • Occasional travel (up to 10%) for cross-regional collaboration, data workshops, or platform integration support., • Participation in global Guardian data governance and performance review initiatives.

The company is a well-established, large organization specializing in the industrial and manufacturing sector specifically providing chemical etching services to technical clients. Experience selling chemical etching services, if not, machining, CNC Machining, Additive Manufacturing.

Bachelor's degree in Engineering (Mechanical, Civil, Industrial, or related field); Master's preferred. We are seeking a results-driven Engineering Manager TQM to lead initiatives in manufacturing process optimization, quality assurance, research and development, and capital project execution withi

Experience in a food production environment or industrial laboratoryExperience with upscaling of food manufacturing processes is a plus: moving from lab scale to industrial scale. Bachelor's or Master's in food process science, food engineering, agricultural science, engineering, material science or

Valcor Engineer Corp. is a world leader in the design and manufacture of solenoid valves and flow control components for liquids and gases in critical applications, for aircraft, military, aerospace, nuclear, light industrial and scientific industries. CNC Programmer Duties and Responsibilities Include but Are Not limited to the Following: \n • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs.\n, • Programming in Mastercam.\n, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC.\n, • CAD in Solidworks.\n, • Read, analyze, and interpret blueprint drawings/specifications.\n, • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc.\n, • Organize and maintain programs, setup sheets, and revisions to both.\n, • With machine operator or independently, conduct first run prove outs.\n, • High School or equivalent. Tech school and / or college is a plus. \n, • Minimum 8 years of machining experience with a minimum of 4 years of programming.\n, • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs.\n, • Be able to take part in employee relations at the shop level including adherence to labor contract provisions.\n Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics.

As a Security Officer - Armed Industrial Site Patrol in Jersey City, NJ, you will serve and safeguard clients in a range of industries such as Manufacturing & Industrial, and more. As a Patrol Armed Officer at this manufacturing and industrial location, you will monitor and patrol assigned areas, he

Responsibilities Responsibilities include but are not limited to: Repairing, main Maintenance Technician, Maintenance, Manufacturing, Healthcare, Tech, Industrial. Allied Reliability is seeking a Maintenance Technician II/2nd Shift to assist with maintaining an industrial facility. Must Have Industr

Proactively raises questions about bias, fairness, and responsible AI use. AI product experience in industrial companies (energy, manufacturing, supply chain, logistics, industrial automation). Define AI product management practices that will scale across the organization.

As a Patrol Armed Officer at this manufacturing and industrial location, you will monitor and patrol assigned areas, helping to deter security-related incidents while providing a visible presence. As a Security Officer - Armed Industrial Site Patrol in Jersey City, NJ , you will serve and

As a Security Guard - Armed Industrial Patrol in Jersey City, NJ , you will serve and safeguard clients in a range of industries such as Manufacturing & Industrial, and more. Job ID:** 2025-1493951 Location: United States-New Jersey-Jersey City Job Category: Security Officer,

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$24.56 To $28.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

By joining our rapidly growing Private Equity practice you will serve as a trusted partner to our clients. It is essential for Private Equity funds to have a portfolio support team, either internally or externally, to guide CFOs as they build a scalable accounting and finance function that supports