Industrial manufacturing jobs in Orange, NJCreate job alerts

Job DescriptionCompany Urgently Hiring HVAC Service Technician!! Job Description Join our team as an HVAC Service Technician, where you will expertly diagnose and repair various HVAC systems, including VRV/VRF, split systems, heat pumps, and air handlers. Use your EPA-certified skills to handle refrigerants and optimize system performance. With your experience, contribute to maintaining and enhancing HVAC operations in both commercial and residential settings. Responsibilities • Diagnose and repair HVAC systems such as VRV/VRF, split systems, heat pumps, and air handlers., • Troubleshoot and service HVAC equipment using EPA-certified techniques., • Apply electrical and mechanical knowledge to read wiring diagrams, test circuits, and repair motors, compressors, and controls., • Utilize multimeters, gauges, and pressure testing tools for precise diagnostics., • Work with building automation systems and smart thermostats for system integration., • Use HVAC software tools to monitor, calibrate, and troubleshoot system performance., • Connect HVAC units to cloud-based platforms for remote monitoring and configuration., • Use tablets, laptops, and diagnostic interfaces for system updates and troubleshooting., • Provide excellent customer service by establishing rapport and explaining technical issues clearly., • Maintain professionalism and responsiveness during service calls., • Follow OSHA standards and company safety protocols., • Maintain a clean work area and accurate service documentation.Essential Skills, • 5+ years of experience in commercial/residential HVAC service., • Proficiency in electrical and mechanical diagnostics and repairs., • Experience with building automation systems and smart thermostats., • Knowledge of IP-based controls and Wi-Fi/Ethernet-enabled equipment., • Strong interpersonal and communication skills.Additional Skills & Qualifications, • EPA Certification preferred., • OSHA 30 & SST certification required., • Experience with brazing, threading, installation, piping, and pipe fitting., • Ability to read and interpret HVAC blueprints., • Physical capability to lift 40+ lbs, climb ladders, and work in various conditions., • Valid driver’s license and willingness to travel.Why Work Here? Enjoy a structured 40-hour work week with opportunities for overtime. Be part of a team that values professionalism and safety while offering growth opportunities and skill development in a supportive environment. Work Environment Work within a structured schedule from 7:00 am to 3:30 pm. Ensure all certifications and physical PPE are on hand at all times. Embrace a dynamic work environment that includes fieldwork and adherence to safety protocols. Job Type & Location This is a Permanent position based out of Maplewood, New Jersey. Pay and Benefits The pay range for this position is $60000.00 - $100000.00/yr. Benefits: 401(k) Competitive salary Health insurance Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Workplace Type This is a fully onsite position in Maplewood,NJ. Application Deadline This position is anticipated to close on Sep 5, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Overview: As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. This role is the resident expert in refrigeration systems. Shift: Monday to Friday - 9am to 5pm You will.. • Maintain and operate industrial refrigeration systems including large rack systems, split systems, blast chillers, cooling towers and ancillary equipment., • Lead and educate compliance with all safety, food safety, and security standards., • Perform preventive maintenance and routine inspections on assigned refrigeration and HVAC systems and ancillary equipment as needed., • Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower-level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting., • Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate., • Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in refrigeration., • Lead root cause analysis of major downtime events., • Act as a network resource for technical issues and lead network-wide root cause analysis., • Develop maintenance personnel knowledge on intermediate to advanced refrigeration processes, tools and techniques., • Audit maintenance personnel work and provide feedback to improve performance and quality., • Audit vendor work to provide feedback to leadership on quality of work and SLA performance., • Write and/or modify PMs to standardize across the network and increase effectiveness., • Repair and perform predictive and preventative maintenance procedures on CO2 and Freon refrigeration systems including, but not limited to compressors, pumps, fans, heat exchangers, glycol systems, various industrial utility systems, motors, and power distribution systems., • Give direction and/or training to entry level refrigeration technicians including, but not limited to day-to-day operations, inspections and inspection techniques, basic repairs and repair techniques, and conformance to all state, local, and HelloFresh regulations and policies. You have.. • 4-6 years of experience with refrigeration repair and maintenance in an industrial setting,, • Advanced understanding of rack system refrigeration and associated equipment., • Experience with repair and maintenance of glycol systems, heat exchangers, HVAC, and water chiller systems., • Experience with electrical systems including single and three phase motor systems, power distribution, and low voltage controls with the ability to troubleshoot to the component level., • Current Environmental Protection Agency (EPA) Section 608 certification., • All necessary regulatory licenses required by local municipalities to work in the field of industrial refrigeration., • Ability to demonstrate excellent work habits in line with Good Manufacturing Practices (GMP’s)., • Ability to conform to all OSHA, PSM, HAZMAT, and HelloFresh safety programs and regulations., • Ability to demonstrate understanding of proper handling and recycling procedures for chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), Hydrofluro-Olefins (HFO), CO2, and other industry standard refrigerant types., • Ability to safely replace mechanical and electrical components including motors, motor starters, switches, solenoids, pumps, refrigeration valves, compressors, and auxiliary refrigeration equipment., • Experience working with a wide range of networked refrigeration controls platforms., • Ability to withstand walking, lifting, bending, stooping, climbing ladders, walking on roofs, and working in confined spaces., • Basic computer skills., • Ability to read and understand drawings, schematics and diagrams., • Ability to travel as necessary (up to 10%) for business purposes., • High School diploma or equivalent., • Competitive Salary & 401k company match that vests immediately upon participation, • Generous parental leave of 4 weeks & PTO policy, as well as paid holidays off, • $0 monthly premium and other flexible health plans, • Amazing discounts, including up to 75% off HelloFresh subscription, • Flexible shift scheduling & advancement opportunities, • Emergency child and adult care services, • Snacks & monthly catered lunches At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

Job Description Ingenus Pharmaceuticals offers a generous Paid Time Off policy, as well as, 14 paid holidays per year. Medical, Dental and Vision benefits are offered to all associates and are effective on the 1st day of the following month after hire. Enrollment in 401k after 90 days. The Manufacturing Operator/Technician II is responsible for all functions relating to the processing of drug products; consistent with established Current Good Manufacturing Practices (cGMP), customer requirements and in conjunction with all Standard Operating Procedures (SOP). Responsible for the safe and efficient execution of their job duties, while ensuring product compliance to established standards. Major Areas of Responsibility  Execute Batch Record and logbook documentation with clear details and accuracy.  Execute the procedures used to clean pharmaceutical production equipment and facilities.  Operates pharmaceutical production machinery and executes procedures for manufacturing such as dispensing, mixing, coating, encapsulating, granulating, drying, milling, blending, compressing etc.,  Executes total changeovers and cleaning.  Identifies and assists in the corrective actions of processing related issues.  Maintains production reporting for assigned work unit operation.  Performs required in-process product quality checks and document accurately.  Execute procedures to complete tasks in a safe, compliant and efficient manner.  Works in collaboration with others as part of a team.  Assists with on the job training of other production trainees and operators.  May determine methods and procedures on new assignments and may provide assistance to other support personnel.  Effectively communicates issues to supervisor.  Adheres to all cGMPs, compliance/regulatory mandates and quality requirements.  Assists in the identification and implementation of continuous improvement opportunities.  Performs other related duties as assigned to meet departmental and Company objectives. Required Knowledge, Skills and Abilities  Knowledge of Metric and English weighing and measurements systems.  Basic understanding of mechanical machinery and the operating principles of control systems.  Demonstrated mathematical ability in addition, subtraction, multiplication, division, ratios and percentages.  Ability to use a calculator.  Ability to follow both verbal and written instructions including SOP’s and Batch Record documentation.  Accurate and precise in recording data and batch information.  Ability to work in both independent and team environments.  Proficient in reading and writing English to understand work instructions and document results.  Ability to operate pharmaceutical processing equipment.  Ability to meet required standards of cGMPs.  Demonstrated understanding of the unit operations and the ability to assist with on-the-job training of manufacturing trainees and operators. Education and Experience  High school diploma or general education diploma (GED).  Two years’ related experience or equivalent technical training/certification preferred; or a combination of related experience and technical training/certification. Physical Demands The physical demands described here are representative of those that must be met by an individual to successfully perform the essential functions of this job:  Stand, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, and hear without any aids.  Capable of lifting or carrying and walk with a minimum of 30 kg alone without any support or aid and higher weights with support or aid as required.  Capable of moving the machines, filled containers, and other accessories alone or with support or aid as required.  Work different operational shifts from time to time as required.  Weekends / holidays and extended hours as required.  Have clarity of vision at 20 feet or more and 20 inches or less with the ability to judge distance and space relationships, bring object into sharp focus and see up and down or to the right or left while fixed on a point. Must also have the ability to identify and distinguish colors.  Operate trucks and other industrial vehicles to transfer the containers/production equipment.  Manufacturing operator/technician II are expected to operate any industrial machinery such as Forklifts, Hi-Lo, Reach Truck, Hand truck, Pallet Jack, Drum lifter etc. to lift, carry, push, pull or otherwise move objects. Work Environment The work environment characteristics described here are representative of those an individual encounter while performing the essential functions of this job:  Sufficient noise to occasionally cause the individual to shout in order to be heard above the ambient noise level.  Individual is in a proximity to moving mechanical parts, electrical current and exposure to chemicals.  Atmospheric conditions sometimes expose individual to dust, for which protective equipment is available.  Individual may be required to wear respiratory devices that include but are not limited to: Air Purifying Respirators (APR) which include half-face (Dust / Mist Respirator & Half-Face Air Purifying Respirator) and full-face negative pressure respirators  Individual may be required to wear hearing protection under certain conditions  Any employee required to use any type of Air Purifying Respirator must not have facial hair and must be cleanly shaven to assure a proper seal. Ingenus Pharmaceuticals LLC. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Company DescriptionIngenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.Ingenus Pharmaceuticals wants to hear from you. Ingenus Pharmaceuticals is at the forefront of the rapidly growing generic medication industry, delivering access to safe, quality medications to U.S. consumers all across the healthcare continuum. Our company is built around the principles of innovation and ingenuity, a world-class leadership team, and—most importantly—the best and brightest people in the pharmaceutical industry. Are you ready for a new challenge? Do you enjoy working with a diverse group of patients, suppliers and partners? Then come to Ingenus, where you can truly make a difference; where together, we change the world, one medication at a time. We set high standards and reward them with competitive benefits. If you consider yourself a standout in your profession, let’s talk to find out if we are the right fit for you.

Job Description Are you a skilled CNC Milling Machinist looking for a new opportunity? Join our dynamic team at Emco Industrial Plastics, a leader in plastic manufacturing and machining. We specialize in delivering high-quality custom plastic parts to our clients across various industries. Position Overview As a CNC Milling Machinist, you will program, set up, and operate CNC milling machines to produce precision plastic components. Your expertise will ensure the highest quality standards while meeting production deadlines. Key Responsibilities: • Program, set up, and operate CNC milling machines, • Read and interpret blueprints, engineering drawings, and specifications., • Perform tool changes, adjustments, and setups to meet job requirements., • Monitor machining operations to ensure accuracy and quality., • Conduct inspections using measurement tools such as calipers, micrometers, and gauges., • Proven experience as a CNC Milling Machinist., • Proficiency in G-code programming and CNC software., • Strong understanding of machining processes., • Ability to read and interpret blueprints and technical drawings., • Excellent attention to detail and problem-solving skills., • Competitive pay based on experience., • Comprehensive benefits package, including health, dental, and vision insurance., • Paid time off and holiday pay., • Opportunities for growth and advancement within the company., • A friendly, supportive, and collaborative work environment., • First shift - Monday - Friday 7am - 3:15pmCompany DescriptionLeading distributor and fabricator of plastic sheet, rod and tube (Est. 1983), located in Northern NJ (Essex County) has an immediate opening for a CNC Milling MachinistLeading distributor and fabricator of plastic sheet, rod and tube (Est. 1983), located in Northern NJ (Essex County) has an immediate opening for a CNC Milling Machinist

Job Description Press Brake Operator • Salary: $23-$28/ per hour, • Hours: Monday thru Friday 7am-3:30pm POSITION SUMMARY: The employee is responsible for the daily setup and operation of hydraulic-controlled press brakes in a metal fabrication shop. The operator may be required to assist other operators as a helper on high-priority work or other machines as required. This is a cross-functional position within the Press Brake department. ESSENTIAL FUNCTIONS: • Set up and operate a press brake for routine established work., • Select correct tooling for the job task with setup documents., • Load, install and correctly set up the tools required., • Perform assigned work within time standards and quality expectations., • Inspect work of coworkers as required., • Account for time and work completed., • Safely handle materials and completed work., • Make routine decisions and use problem solving to resolve basic manufacturing issues or seek assistance from qualified sources., • Report and document basic material, production and quality control issues., • Maintain performance log books on assigned area equipment and report deficiencies., • Metal press brake and basic fabrication background., • Basic knowledge and understanding of fabrication, including press brake, is desirable., • Competent at basic dimensional measuring and the use of precision measurement tools., • Demonstrated competency in basic shop math., • Basic ability to read and understand blueprints and other shop drawings., • Flexible and responsive with a strong teamwork orientation., • Good verbal communication skills., • Strong orientation toward quality, safety, and continuous improvement., • Ability to work well in a fast-paced environment to meet team expectations., • Lift, carry, push, and or pull up to 50 lbs. on a frequent basis., • Sit, stand, and walk for up to 10 hours per day., • 401(k), • Dental insurance, • Health insurance, • Paid time off

Job DescriptionJob Title: Machine Operator (Operador de Maquina)Job Description As a Machine Operator, you will assist in operating and setting up production machines. Responsibilities • Set up and operate machines automated packaging machines, • Adjusting machine speed and temperature as needed, • Document information before and after shift, • Labeling and packaging equipment, • Transport completed rollsAdditional Skills & Qualifications, • Mechanical aptitude, • Manufacturing knowledge, • Food manufacturing experience The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rutherford,NJ. Application Deadline This position is anticipated to close on Sep 5, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Entry Level and Experienced candidates are all encouraged to apply!!! Unit Pack is looking for motivated individuals who want to learn new skills and become a part of the team. If you are hard working, looking for long term employment and have a positive attitude then this position is for you! Production Associate/Machine Operator responsibilities include: • Running a production line, • Replenishing raw materials used in production, • Performing quality control tasks, • Weighing, labeling and boxing products, • Assisting mechanics during emergency repairs, • Cleaning equipment, • Completing paperwork, • Maintaining a clean and safe work environment Candidates need to be dependable, punctual, detail oriented, strong communicators, fast learners, and be able to work independently when needed. Job Requirements: Must be motivated and looking to learn and contribute to a team Ability to lift 30 pounds unassisted Able to stand for long periods of time Must be able to follow instructions and learn procedures English Language Required: Speaking, Reading, and Writing High School degree or Equivalent. Employee Benefits: Health, Dental, & Vision benefits after 90 days Paid Holidays Paid Vacation Life Insurance 401k with company match Weekly Bonus Program Job Type: Full-time Company DescriptionUnit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands. At our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations.Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands.\r\n\r\nAt our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations.

Job Description We are seeking a Grinder / Sand Blaster to join our team on-site in Belleville, NJ. In this hands-on role you will grind, clean, and polish stainless steel to matte and mirror finishes. Key responsibilities include, but not limited to: • Grinding seams on stainless and carbon steel components utilizing handheld grinders, belt sanders, abrasive discs, and polishing wheels., • Polishing stainless steel to specified finishes., • Sand Blasting carbon steel components., • Maintaining a clean, organized workspace., • Ability to stand and concentrate for 8+ hours per shift., • Comfortable lifting 50+ lbs regularly., • Strong team orientation and willingness to cross-train in related fabrication tasks., • Health, • Dental, • Vision, • Life Insurance

Job Description • We have an opening for a full time TECHNICIAN, MAINTENANCE MASTER position., • Location: Mondelez - 200 DeForest Ave, East Hanover, NJ 07936 Note: online applications accepted only., • Schedule: Full Time: Monday-Friday, 7:00 am-3:30 pm, • Requirement: Plumbing, Electrical, HVAC-R, Mechanical experience, • Pay Range: $35.00 per hour to $44.00 per hour ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1452521. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description Staff Management Group is seeking a Maintenance Mechanic for our client in Hillside, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • All shifts available, • 1st Shift: 6AM - 2:30PM, • 2nd Shift: 2PM - 10:30PM, • 3rd Shift: 10PM - 6:30AM, • Plus overtime Pay Rate: • $25 / hour Job Summary: Looking for experienced Maintenance Mechanics. The successful candidate will work with the maintenance manager to quickly diagnose problems and prevent downtime. Job Responsibilities: • Troubleshoot and diagnose mechanical, electrical, pneumatic, and hydraulic issues, • Perform preventive maintenance to reduce equipment failure and production delays, • Install, repair, and maintain machinery and equipment, including disassembly, part replacement, and reassembly, • Interpret and work from mechanical and electromechanical schematics and drawings, • Demonstrate basic knowledge of AC/DC drives, 3-phase motors, and transformers, • Work with PLCs, sensors, and measurement instruments at a basic level, • Maintain safety standards and follow company procedures at all times, • Assist coworkers and perform other duties as assigned to support the maintenance team, • Track and submit work orders using computerized maintenance management systems (CMMS) Job Requirements: • Minimum of 3 years’ experience in a manufacturing or industrial maintenance environment (required), • Proficient in mechanical, pneumatic, hydraulic, and electrical systems, • Skilled with hand tools and diagnostic equipment, • Strong communication skills to report issues and updates clearly, • Ability to follow procedures independently after training, • General computer literacy to input maintenance data Preferred Qualifications: • High school diploma or equivalent, • Prior experience in a packaging plant or similar industrial facility Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Industrial Maintenance Technician is responsible for the installation, maintenance, troubleshooting, and repair of industrial equipment and machinery in a food processing plant. This position ensures that all equipment operates efficiently and in compliance with food safety regulations, company standards, and best practices. The role requires a strong understanding of mechanical, electrical, and electronic systems, as well as the ability to perform preventative maintenance and corrective repairs. This is a full-time position with scheduled hours from Sunday through Thursday, 11:00 AM to 7:30 PM. What you'll do: Maintenance and Repairs • Perform routine and preventive maintenance on all production machinery, equipment, and systems (conveyors, packaging equipment, mixers, roasters, etc), • Diagnose mechanical, electrical, and hydraulic issues and make necessary repairs, • Ensure all equipment complies with safety, regulatory, and environmental standards, • Maintain safe work practices and ensure compliance with OSHA and food safety regulations (e.g., SQF, FDA), • Complete maintenance logs and reports to ensure accurate documentation, • Work closely with production teams to minimize downtime and maximize productivity, • Communicate effectively with supervisors and management to report issues and recommend improvements, • Assist with the installation of new machinery or equipment, • Respond quickly to emergency breakdowns to minimize production delays, • Prioritize repairs to ensure minimal impact on production schedules What you'll bring: • High School Diploma or equivalent; Associate's degree in Industrial Maintenance, Electrical Engineering, or related field preferred, • Minimum 3 years of experience in industrial maintenance, preferably in a food processing or manufacturing environment, • Strong knowledge of electrical, mechanical, hydraulic, and pneumatic systems, • Demonstrated experience with VFFS, HFFS, standup pouch baggers, and associated combination scales, • Bilingual Preferred (Spanish, English), • Ability to lift up to 50 lbs regularly and perform physical tasks such as bending, kneeling, and standing for extended periods, • Ability to work in a noisy, fast-paced, and sometimes hot or cold environment, • Certifications (preferred, but not required): Forklift certification, OSHA safety training, and electrical and/or mechanical certifications What we offer • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $25 - $30/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at

Job DescriptionAscension Global Staffing & Executive Search, a Hispanic Women Owned & Operated National Recruiting Firm stands at the forefront of innovation and excellence. Led by a visionary team with a deep commitment to diversity and inclusion, our firm is dedicated to identifying and attracting top talent across the nation. With a unique blend of cultural insight and professional expertise, we pride ourselves on creating an environment that fosters success for both employers and candidates. Our law firm client is seeking a Corporate Attorney. The Firm’s highly credentialed and experienced corporate practice group attorneys handle a broad range of public and private transactional, compliance and corporate counsel assignments. Their clients are international and domestic investors, lenders, entrepreneurs and operating companies, from startups to small and midsized entities to Fortune 500 corporations. The Firm’s experience spans a diverse range of industries, including financial services, pharmaceutical and other life sciences, technology, insurance, real estate, construction, public utilities, health care, education, food and beverage, hospitality, media, consumer products and industrial manufacturing. Requirements • Minimum 3-5 years of corporate practice experience., • Experience drafting and negotiating key and ancillary documents for M&A, financing, joint venture, technology collaborations/licensing and other corporate and commercial transactions., • Ability to work closely with clients’ business and legal personnel in a variety of corporate matters., • Strong analytical, interpersonal, drafting, negotiation, written and verbal communication skills.Qualifications, • Possess a JD from an accredited law school with a strong academic record., • Licensed to practice in the State of New Jersey, New York a plus. Both are preferred., • Demonstrated ability to work as part of a team and to interact directly with clients.Salary and Benefits, • Salary Range: $185,000 – $205,000 annually. Final compensation will be determined based on experience, skills, and qualifications., • Benefits: They offer a comprehensive benefits package that includes medical, dental, and vision coverage, a 401(k)-retirement plan with firm contributions, paid time off, and other firm-sponsored benefits and perks.

Job Description Sloan's Plumbing Technical Representative works with the sales team as the key technical advisor and product advocate to assure complete customer satisfaction throughout all stages of the sales process. You will become the go to person for Sloan product application and provide unbiased implementation of company policies and procedures. You will be the primary technical resource for the field sales force and responsible for site assessments, product selection, installation oversight, and product training. What you will do: • Complete job site assessments on projects that include analyzing the upstream conditions (i.e. water pressures, water supply pipe sizes, PRV presence, water quality, etc.), fixture and valve manufacturers, age and conditions and downstream conditions (i.e. pipe line conditions). Interprets customers' needs and makes recommendations on plumbing system improvements, product selection and tests solution in one or two fixtures or restrooms before converting entire building. Travels to project sites to perform start-up, integration and training services., • Perform on-site field investigations and troubleshooting to resolve any product issues. Captures and analyzes field data for Engineering / Manufacturing review in order to mitigate product failures, initiate corrective actions and aid in new product development and/or product improvements. Handles overflow calls for Technical Support when not in the field., • Provides direction and support to the Sloan Service Network during new product launches at customer facilities. What we are looking for: • 5+ Years experience n troubleshooting methods and field quality assessments., • Ability to interpret maintenance manuals, schematics and wiring diagrams to install, disassemble, assemble and repair Sloan products., • General knowledge of plumbing controls systems, • Strong knowledge and understanding of service and installation processes, • Ability to read and interpret plumbing system drawings, • Ability to travel up to 50% (travel is primarily day trips)Company DescriptionSloan is the world’s leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water- efficient products including flush valves, electronic faucets, soap dispensing and sink systems for commercial, industrial and institutional markets worldwide.Sloan is the world’s leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water- efficient products including flush valves, electronic faucets, soap dispensing and sink systems for commercial, industrial and institutional markets worldwide.

Job DescriptionDescription: Position Summary Lincoln Electric Products Co. Inc. is seeking a highly motivated and experienced Operations Manager to join our team in Union, NJ. This individual will play a critical role in overseeing the daily operations of the assembly department, driving efficiency, and ensuring the seamless execution of organizational goals. The Operations Manager will work collaboratively across departments to enhance productivity, implement process improvements, and contribute to the overall success of the business. While this role primarily operates Monday through Friday, occasional Saturday work may be required based on business demands. This full-time, exempt position reports directly to Director of Operations and involves a hands-on approach. Working Conditions: Office/Shop Environment Primary Job Function: · The Low-Voltage Switchboard Assembly Operations Manager oversees the factory's production and assembly of low-voltage switchgear systems. · This includes managing operations and personnel involved in the assembly process to ensure efficient production, high-quality output, and timely delivery. · The role demands strong leadership, operational expertise, and a focus on continuous improvement in a unionized manufacturing environment. Key Job Responsibilities: • Production Planning: The Operations Manager is responsible for developing production plans, scheduling work activities, and ensuring the availability of necessary resources, such as materials, tools, and equipment, to meet production targets., • Quality Control: They are responsible for implementing quality control measures and ensuring that all assembled switchgear systems meet the required standards and specifications. This includes conducting regular inspections, tests, and audits to identify and address any quality issues., • Process Improvement: The Operations Manager continually looks for opportunities to improve the assembly process, optimize workflow, and enhance productivity. They may collaborate with engineering teams to implement process enhancements, introduce automation, or streamline operations., • Team Management: This role involves leading and supervising a team of assembly technicians and operators. The Operations Manager provides guidance, training, and support to ensure that employees perform their tasks effectively and efficiently., • Safety and Compliance: They are responsible for enforcing safety protocols and ensuring compliance with relevant industry regulations and standards. This includes maintaining a safe work environment, conducting safety training, and addressing any safety concerns or incidents., • Inventory Management: The Operations Manager oversees inventory levels, ensures the availability of required components and materials, and helps manage stock control to avoid shortages or excesses., • Collaboration and Communication: They collaborate with other departments, such as engineering, procurement, and quality assurance, to coordinate activities and address any cross-functional issues. Effective communication with stakeholders, such as customers and suppliers, is also essential., • Performance Monitoring and Reporting: The Operations Manager tracks production performance, monitors key performance indicators (KPIs), and prepares regular reports to evaluate productivity, quality, and other relevant metrics. They analyze data and provide recommendations for improvement., • Experience working in a union shop and familiarity with union labor laws should be preferred. Requirements: Job Requirements: · 3-5+ years of working experience in custom metal fabrication electrical equipment in an industrial setting. · Ability to read blueprints, bill of material (BOM’s), schematics, diagrams, and technical orders to determine best methods and sequences of product assembly. · An effective leader who can help level load the factory and has the ability to plan a lookout for 3-4 weeks so that the company’s overhead expenses for overtime in the shop stay within budget. · Should be a Team Player and an Inclusive Leader. · Knowledge about hand tools and measuring devices. · Knowledge of Low Voltage or Medium Voltage Switchgear or components. · Should have a very good understanding of Operational Excellence process improvements. · Ability to work in a loud environment. Education: • A bachelor’s degree in engineering., • Certification in Six Sigma or other process improvement methodologies is preferred.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description Broad Function and Purpose of Position: Product Regulatory expert for Construction Chemical Company responsible for preparing and releasing product safety information for finished and intermediates products across all technologies. Product Stewards operate SAP/Product Compliance and its Safety Data Sheet Generator that provides the warning label language for all products sold by Sika Corporation and its Subsidiaries around the world. Product Stewards work closely with Local and Global Corporate Raw Material, Chemical Inventory, and Sustainability Specialists, VOC Experts, Chemists, Operations and Business leaders. Sika offers a flexible work schedule. Base salary of $80,000-$92,000 commensurate with experience and educational background. Specific Responsibilities: • Support management in interpretation and implementation of federal, state, and international EHS regulations such as OSHA Hazard Communication, TSCA, DSL, 49 CFR, IMDG, IATA, VOC, Cal Prop65, and Right to know lists., • Monitor current chemical regulations and notify organizational stakeholders about upcoming changes., • Assign transportation requirements such as UN Homologation, Packaging Group, and transportation exceptions for dangerous goods, • Maintain regulatory information concerning the hazard classification, labelling, packaging, and transportation, as well as ecological, toxicological and safety information in SAP ERS system/Product Compliance., • Create Safety Data Sheets (SDS) and GHS label information for commercial and consumer products., • Manage distribution of SDSs, GHS labels and product warning information for all product technologies.Qualifications Qualifications/Experience/Education: • Bachelor's degree in environmental, chemical, or industrial engineering, or related field., • 1 -3 years professional experience in the Chemical Industry and/or Product Compliance., • Experience in a chemical manufacturing environment preferred., • Working knowledge of SAP Product Compliance., • Knowledge of OSHA HAZCOM preferred., • Transportation certification in 49 CFR, IMDG, and IATA preferred., • Strong verbal, written, analytical and persuasive skills and the ability to interact effectively with all levels of employees and management., • Ability to work both independently and in a team environment., • Some international travel may be required for training purposes., • Flexible work schedule. Additional Information Perks & Benefits • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, Paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

Job Description Seeking a Bilingual Spanish Production Planner for a Cosmetic Glass Manufacturer Summary: Perform and monitor production and project planning ensuring activities are within set timelines Daily Activities: · Issue work orders to production. · Monitor status of productions. Skills, Experience, Education and Abilities: · 3-5 years of experience in Supply Chain with project and/or product planning experience. · Glass Manufacturing experience · Ability to read, analyze and interpret manufacturing procedures, specifications, BOMs (bill of materials), spreadsheets and reports · Bilingual Spanish · Proficient in MS Office (Word, Excel and Outlook) · Projects oriented with the ability to work with timelines · Analytical, planning and organizational skills · Ability to operate in a dynamic environment with the flexibility to conform shifting priorities · Ability to demonstrate teamwork and collaborate across multidisciplinary teams to achieve common business goals · Ability to communicate effectively at all levels · Strong sense of urgency Team environment, Full benefits, Hours: 8-4:30, Very stable company. Company DescriptionSystem One, the recruiting company for this client is a leader in staffing solutions and recruiting. Our team has collectively over 75 years of recruiting expertise. System One has national exposure with over 50 offices and clients in every state. Each year, we place thousands of professionals in contract and direct hire roles with the nations top employers. Our recruiters have years of experience in professional, industrial and technical environments; thus, we have the contacts, experience and resources to make great career matches.System One, the recruiting company for this client is a leader in staffing solutions and recruiting. Our team has collectively over 75 years of recruiting expertise. System One has national exposure with over 50 offices and clients in every state.\r\n\r\nEach year, we place thousands of professionals in contract and direct hire roles with the nations top employers. Our recruiters have years of experience in professional, industrial and technical environments; thus, we have the contacts, experience and resources to make great career matches.

Job Description Industry: Tools and Supplies for Jewelry, Industrial, Dental, and Hobby Are you a skilled bench jeweler looking to transition into a new career? We are a leading distributor of tools and supplies for the Jewelry, Industrial, Dental, and Hobby industries, providing high-quality products to professionals and hobbyists alike. We are seeking a Product Manager to help us expand and refine our product offerings. This is a unique opportunity to leverage your hands-on jewelry-making experience and industry knowledge to shape the products and tools used by makers, creators, and innovators worldwide. What You’ll Do · Product Strategy & Market Insights · Product Selection & Development · Customer Engagement · Collaboration & Launches Qualifications: · 3+ years of experience as a bench jeweler or in a similar hands-on role. · Knowledge of tools, materials, and techniques in the Jewelry, Industrial, Dental, or Hobby industries. · Strong communication and collaboration skills. · Analytical mindset with the ability to interpret market trends and customer feedback. · Excellent organizational and project management skills. Preferred: · Familiarity with product evaluation and manufacturing processes. · Passion for tools, innovation, and improving the customer experience. Why Join Us? · Work with a trusted distributor that serves a diverse range of industries. · Play a key role in shaping the tools and supplies used by professionals and hobbyists. · Collaborate with a passionate team dedicated to quality and innovation. · Enjoy opportunities for growth and professional development.

Job Description Field Service Engineering role, New Jersey Based OEM of Electronic Control Systems for Essential Industries Work on Unique/Customizable systems control, data collection, network and electronics connected automation type systems. Newly Created role with an Expanding Company, Managerial Culture towards utilizing the best available technology and tools to increase customer satisfaction and maximize profitability. Extremely Bright and Collaborative Teams Focused Environment, History of Internal Promotions. Desired Skills/Experience/Profile: • Experience installing or troubleshooting Electronic Control Systems (SCADA, MES, HMI, DCS or similar) for Industrial Type Environments., • PLC programming (Current experience Writing or Customizing Ladder Logic code) and/or related PLC technology., • HMI Experience: Experience customizing and configuring custom or off the shelf HMI User interfacing type software., • Experience connecting PLC based systems to a network through TCP/IP, routers/switches/hubs, Windows or other networking environments., • Strong Verbal Communication Skills and proven Time Management (task Prioritization) skills., • Experience with OR knowledge of PCB's (Printed Circuit Boards), wiring and other low level electronics and how to troubleshoot and/or replace low level electronics inside industrial electro-mechanical manufacturing-automated systems., • Coding or Programming experience: SQL, C#, C++ or similar., • Electrical Engineering Training or Study; A College Degree [A.S. or B.S. Degree] in Electrical Engineering, or Military Training or Technical School training is a preferred.

Job Description Our client is seeking a manufacturing estimator to calculate the costs of labor, materials, and overhead for producing machinery and related parts, translating technical specifications and blueprints into competitive bids for customers. About the Role We’re seeking a Production Cost Estimator to develop accurate, timely cost estimates for custom and repeat-build industrial equipment. You’ll translate drawings, specs, and routings into clear material, labor, and overhead costs that drive pricing, production schedules, and margin targets. You’ll partner closely with Engineering, Operations, Supply Chain, and Sales to keep quotes competitive and achievable. What You’ll Do * Build cost estimates for new and existing products: material BOMs, routings, labor standards, machine times, outside processing, freight, and overhead. * Analyze drawings and specs (2D/3D) to identify manufacturability, critical tolerances, and risk that may impact cost or lead-time. * Source and validate supplier quotes for raw materials, fabricated components, and services (machining, coatings, heat treat, assembly). * Model labor & machine costs using shop rates, utilization, and setup/run times; propose make-vs-buy recommendations. * Maintain estimating databases (rates, factors, historical actuals); implement continuous improvement to increase estimate accuracy. * Collaborate with Sales/PM to develop pricing strategies, proposal cost summaries, and assumptions/clarifications. * Perform variance reviews: compare estimates to actuals (PPV, labor variances) and feed learnings back into standards. * Support production planning by confirming lead-times and capacity assumptions tied to estimates. * Use cost/quoting software and the ERP/MRP system to create routings, BOMs, and quote packages. Must-Have Qualifications * 3–5+ years in manufacturing cost estimating, cost engineering, or production planning within an industrial equipment or complex fabrication/machining environment. * Strong knowledge of manufacturing processes: machining (CNC), fabrication/welding, assembly, coatings, testing. * Proficiency reading engineering drawings and applying GD&T basics to cost/feasibility decisions. * Hands-on experience with ERP/MRP (e.g., Epicor, Infor, JobBOSS, SAP) and quoting/CPQ or estimating tools. * Excel skills for cost models; comfort with data analysis using historical actuals. * Clear written communication—able to document assumptions and exclusions. Company DescriptionNJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.NJMEP is a private, not-for-profit organization that improves the profitability and competitiveness of New Jersey’s manufacturers.

Job Description Stable and Growing Northern New Jersey Based Niche Industry Company that builds-designs-services Electronic Control Systems for Essential Industries. Excellent Advancement Potential, New And Interesting Projects, Company Culture of Embracing New Technology Seeking a solid electronics background alongside experience in the design and build of PLC based electronic control systems for external-industrial type applications. Desired Skills/Experience: • Excellent verbal and written communication skills as this role requires constant interaction, coordination and communication with various internal and external (customer) departments and people., • Experience with PLC Programming and Ladder Logic., • Experience with TCP/IP and hooking Control Systems (such as DCS, HMI, SCADA or similar) into a Network (Windows, Cisco, etc.) is strongly preferred., • Experience working in a similar role where you have researched-designed-built Electronic Control (or DCS or HMI or SCADA or Similar) systems., • Experience reading-defining-interpreting Electrical Diagrams, One Line Diagrams or Block Level Diagrams (experience with Electrical AutoCAD is preferred)., • Detail Oriented with a strong Sense of Urgency and have excellent Customer Service/Customer Relationship management skills., • Good Business Sense: focused on ROI and Profitability of the Systems you are tasked with building and designing., • reading, understanding and defining contract terms and/or Service Level Agreements (SLA’s)., • coordinating Field Engineering System Upstarts and Cutovers., • Working closely with Technical Customers to Change Initial Specs and System order based on various changes and availability of technical solutions., • Electronic System packing Lists and Billing Paperwork (BOM/Bill of materials); Experience writing Systems Documentation (how to guides, reference manuals, system-start-up lists, etc.)., • Coordinating Electronic System Builds with various teams including Design-Build Electronics Engineering, Manufacturing/QA/QC, External Vendors, External Customers, Sales, Field Engineering and Software., • Researching new and existing technologies including Electrical, Infrastructure/Network Connectivity and UI Software/Database Reporting. Call or Apply Today! Company DescriptionConstantly updating our technology to meet the demands of our multi-site business customers; Experiencing a Major Demand for our unique offering; Profitable and Stable; Managerial Culture towards using the best available technology; Busy Company with a Recession Resistant Business Model.Constantly updating our technology to meet the demands of our multi-site business customers; Experiencing a Major Demand for our unique offering; Profitable and Stable; Managerial Culture towards using the best available technology; Busy Company with a Recession Resistant Business Model.

Job DescriptionDescription: Field Inspector-New Jersey Department: Underwriting Reports to: Manager of Classification and Inspection Location: Hybrid Job Summary: As a Field Inspector in the Underwriting Department, you will be responsible for conducting physical inspections of New Jersey employers and gathering information on business operations. You will prepare detailed, accurate reports that are used to establish the propriety of the classification schedule used on the employer’s workers compensation policy. The territory includes, but not limited to Northern New Jersey counties (Essex, Hudson, Middlesex and Union). NJCRIB has flexible work-from-home schedules and offers great benefits to include: • Generous leave time, including vacation, sick, and flexible floating holidays, • NJ State Pension Plan, • Medical/prescription coverage, • FREE dental coverage, • Strong ability to multitask and work in a team environment, • Excellent communication skills including active listening, • Excellent verbal and written communication skills, • Highly proficient in Microsoft Office Suite or related software programs, • Proficient computer skills with the ability to learn new software, • Extremely well organized with great attention to detail, • Service-oriented able and to resolve complex issues, • Ability to learn quickly and creatively solve new problems, • Ability to work independently with minimal supervision Essential Job Functions: • Independently scheduled inspections with employers to review operations and employment, • Submit comprehensive inspection reports representing the employer’s operational processes and employment, • Collaborate with team members and management to address specific inquiries related to an employer’s operations, • Attend internal, industry, and training meetings as required, • Provide weekly report of completed work and travel reimbursement requests, • Perform other activities, as directed Education and Experience: • High school diploma or equivalent required; a college degree in business, insurance, risk management, or a related field is a plus, • Certification or coursework in insurance, underwriting, risk management, or occupational safety preferred, • Knowledge of industrial machinery, equipment, raw materials, and manufacturing/fabricating processes, • Familiarity with workers’ compensation insurance, underwriting guidelines, or related regulatory standards is a plus, • Prior experience in field inspecting, underwriting support, or other related industry experience preferred Physical Requirements: • Frequent driving, standing, walking, bending, reaching overhead, extension, • Frequent handling of paperwork and computer equipment, • Must be able to push/pull, open/close file cabinet/desk drawers, • Must be able to lift 15 pounds at times, • Must be able to physically inspect property, • Must be able to travel as directed within New Jersey to perform audits/inspections Additional Requirements • Must have current driver's license and current automobile insurance, • This position requires use of your personal vehicle, • Mileage is reimbursed at current IRS rates The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of personnel with this job title. The responsibilities associated with this job may change in accordance with business needs. The employee may be required to perform additional and/or different responsibilities from those set forth above. All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, gender identity, veteran status, marital status or any other characteristic protected by law.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description We are seeking a skilled AutoCAD Drafter (Plant 3D) Key Responsibilities: * Create and revise detailed 2D/3D CAD drawings, including FEED, elevation, plan views, and isometrics. * Conduct field audits to verify dimensions and ensure drawing accuracy. * Collaborate with engineering teams to ensure compliance with construction and regulatory standards. * Evaluate constructability of layouts and suggest alternatives when needed. * Maintain and update drawing packages in accordance with technical standards. * Interface with internal and external stakeholders throughout project execution. * Update drafting standards and ensure proper documentation in the company's filing system. * Support projects across multiple plant locations (CT, DE, NJ). Required Skills & Qualifications: * Proficiency in AutoCAD Plant 3D is mandatory. * Strong 2D/3D drafting skills; experience with Autodesk AutoCAD and optionally Revit. * Solid understanding of process equipment and engineering design practices. * Proficiency in MS Excel, Word, and Project. * Excellent communication, organizational, and interpersonal skills. * Ability to conduct site visits and work in plant environments. * Must pass a 10-panel drug screen and background check per TSA TWIC standards. Education & Experience: * Associate's degree or equivalent from a technical school. * Minimum 3 years of experience in a manufacturing or industrial environment. Physical Requirements: * Ability to lift up to 40 lbs, work on elevated surfaces, and pass a respirator fit test. * Comfortable working in varying climate and weather conditions. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Opportunity for advancement, • Profit sharing About SVC Engineering: SVC Engineering Pvt. Ltd. is a leading metallurgical and engineering solutions provider based in Hyderabad. With decades of expertise in non-ferrous pressure and gravity die casting, alloy development, and precision engineering, we serve various industrial and critical sectors including automotive, electrical appliances, heavy machinery, defense, and infrastructure. Our commitment to quality, innovation, and sustainable practices has made us a trusted /name in the Indian and global markets. Position Overview: SVC Engineering is seeking a highly experienced General Manager to lead its metallurgical operations. The GM will be responsible for overseeing plant operations, ensuring process efficiency, maintaining quality standards, and driving strategic growth. This is a key leadership role reporting directly to the Managing Director/CEO. Key Responsibilities: • Oversee end-to-end plant operations, including production, quality assurance, maintenance, and supply chain., • Lead metallurgical process optimization for alloys like Aluminium & Zinc, and other engineered components., • Drive operational excellence through implementation of lean manufacturing and continuous improvement initiatives., • Ensure all processes comply with statutory, environmental, and industry-specific standards (e.g., ISO 9001, ISO 14001)., • Collaborate with Sales and business development teams to support product development and customization., • Manage vendor relationships, raw material procurement, and logistics., • Build and lead a high-performing operations team through training, mentorship, and clear leadership.Candidate Requirements:, • Bachelors or Masters degree in Metallurgical Engineering, Materials Science, Mechanical Engineering, or a related field., • Minimum 15 years of industry experience in metallurgical or engineering manufacturing environments., • At least 5 years in a senior leadership or general management role., • Strong understanding of metallurgical production processes, including forging, casting, heat treatment, and fabrication., • Proven ability to manage diverse teams, budgets, and cross-functional operations., • Strong leadership, decision-making, and communication skills. Represent company in expositions.Preferred Qualifications:, • MBA or Executive Program in Business/Operations Management., • Experience working with defense or export-oriented manufacturing preferred., • Exposure to international quality and compliance standards.What We Offer:, • Competitive salary and performance-based incentives, • Opportunity to lead a growing, innovation-driven organization, • Professional development and leadership training, • Relocation assistance (if required)How to Apply: Interested candidates may send their updated resume and a cover letter to with the subject line: Application General Manager Pressure Die Casting Applications will be reviewed on a rolling basis until the position is filled.

Job Description Our client in East Hanover, NJ is seeking an onsite Direct Hire Manufacturing Engineer. Salary: 125K Requirements: • BS degree in Mechanical Engineering, Manufacturing/Industrial Engineering, or equivalent., • Over 2 years of experience in a medium/high volume manufacturing environment., • Strong understanding of Continuous Improvement, Six Sigma, 5S, and Lean manufacturing tools., • Comfortable with hands-on interaction with mechanical and electrical components.

Job DescriptionCompany Description Company Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has offices in 103 countries with over 400 manufacturing facilities, and more than 33,000 employees worldwide. With annual sales of CHF 11.24 billion in 2023, our commitment to quality, innovation, and the environment as well as putting our customer’s needs first, encompasses why Sika is the global leader in our industries. Job Description We are seeking an EHS Manager that will be responsible for all environmental reports, process safety, air permits, DPCC, RCRA, NJPDES and local environmental programs. The successful candidate will be responsible for implementing and maintaining programs that drive safety and compliance. Specific Responsibilities: Environmental, Health & Safety Program management: • Lead site in areas of Environmental, Health & Safety, Ergonomics, Industrial Hygiene and Emergency Response., • Coach leadership team on safe behaviors, conditions, and approaches for improved safety culture, • Lead and manage all aspects of EHS training, • Lead site for key Risk Assessments such as HIRA, JHA/JSA, and Safe Work Permitting, • Participate in Gemba / Safety walks focusing on behaviors and conditions, • Ensure proper utilization of company EHS systems such as Sphera, HSI SDS Program, and Gensuite, • Support site engineering for compliance with company Process Safety efforts, • Lead and manage incident/accident investigation processes for near misses and all injuries, • Facilitate New Hire EHS Orientation for temporary and full-time employees, • Participate in the site Behavior Based Safety program, • Lead assist in Root Cause Analysis for incidents / near misses, • Integrate all Corporate and Regional Environmental, Health & Safety programs into daily operations, • Participate and assist in managing Management of Change (MOC) process, • Submit State and Federal EH&S reports (TRI, Tier II, etc.), • Manage all aspects of Environmental including Air Permits (internally and use of 3rd party), • Assist sites to implement Corporate EHS Standards and Procedures, • Assist Human Resources regarding workers compensation case details from injury reports and follow-up analysis needed once employee returns to work Qualifications/Experience: • Associate or bachelor’s degree in occupational safety, environmental health science, or similar degree., • 5-10 years professional experience in occupational safety, environmental, or similar role(s), • Chemical or similar manufacturing backgrounds preferred, • CSP or CIH and/or MS preferred, • Strong verbal, written, analytical and influence skills and the ability to interact effectively with all levels of employees and management., • Knowledge of the following areas: EPA (Environmental) OSHA (Occupational Safety), and similar regulations and reporting., • Experience developing safety culture (E.g., Bradley Curve), • Self-motivated, self-starter Additional Information Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. All your information will be kept confidential according to EEO guidelines. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

Job Description General Manager Flexline, Kenilworth NJ Who are we Founded in 1888 in Baltimore, TIPCO Technologies has been at the forefront of innovation and industry leadership for over a century. Today, with locations across the U.S., we’re proud to offer more than just jobs—we cultivate careers. At TIPCO, we champion growth, promotion, and opportunity. If you’re ready to thrive in a forward-thinking, stable, and growth-oriented environment, we want you on our team! Why Join TIPCO? We’re more than a company—we’re a legacy of innovation and a future built on bold ideas. Be part of a culture where your ideas matter, your contributions are valued, and your career can flourish. What you’ll do We are seeking a proven, dynamic General Manager to lead a strategically critical division focused on specialty assembly manufacturing and product distribution within a leading digital service provider, offering fluid conveyance solutions that empower industries to achieve their full potential. This individual will assume full P&L responsibility and drive performance across all functions—including operations, sales & marketing, sourcing, and engineering—while ensuring world-class customer satisfaction, profitability, and growth. This role requires a hands-on leader with a strong sense of ownership, a strategic mindset, and the ability to thrive in a fast-paced, precision-driven environment. A Day in the Life • Bachelor’s degree in engineering, Business, or a related field (or equivalent experience)., • Minimum 10 years of progressive leadership experience in Sales, Engineering, Operations, or Marketing, preferably within industry or aerospace or a related precision manufacturing environment., • At least 5 years of General Management experience, ideally in a mid-market or growth-stage company., • Demonstrated ability to thrive in a fast-paced, high-pressure environment requiring high attention to detail., • Proven strategic thinker with a strong bias for action and results., • Inspirational leadership style with a track record of developing high-performance teams., • Strong communication, financial acumen, and cross-functional collaboration skills., • Physical ability to lift, push, and pull up to 150 lbs. and perform tasks requiring manual dexterity., • Ability to travel within required branch locations. Our Environment • The noise level in the work environment is usually moderate., • While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Perks and Benefits • Health, Medical, Dental, • 401k, • Company Bonus Structure, • Life insurance, • Pet Insurance, • EAP

Job Description Summary: Responsible for planning, directing, and overseeing the operations of the Maintenance Department to ensure plant equipment and facilities are maintained safely, efficiently, and in alignment with sound engineering practices. Key Responsibilities: • Oversee the maintenance and repair of all production equipment and facilities., • Build, manage, and support a qualified maintenance team capable of sustaining all plant equipment and infrastructure., • Design and implement a robust predictive and preventive maintenance program to reduce unplanned downtime., • Ensure all operational equipment is maintained in optimal working condition., • Schedule necessary repairs to minimize disruption to operations., • Recommend equipment or facility modifications and replacements to improve efficiency and reduce maintenance costs., • Manage the maintenance of all plant transportation assets., • Ensure proper care, organization, and maintenance of all tools and maintenance equipment., • Oversee the upkeep and repair of all plant buildings and infrastructure., • Review and approve all repair and maintenance requisitions and invoices., • Identify and implement cost-saving initiatives and efficiency improvements through lean manufacturing principles., • Develop and manage the annual maintenance budget to support all required activities., • Track and report monthly performance against budget targets., • Maintain adequate inventory and control over spare parts and maintenance supplies., • Lead employee training, development, and safety initiatives within the maintenance team., • Handle employee discipline as needed to maintain department standards. Job Requirements: • B.S. in Engineering (Mechanical, Industrial, or Electrical preferred) with 810 years of relevant experience in equipment and facilities maintenance., • Proven track record of managing maintenance operations, including planning, organizing, coordinating, and leading a team., • Minimum of 5 years of experience in a maintenance management role within a manufacturing and/or food processing environment., • Strong leadership and organizational skills., • Extensive knowledge of process, packaging, and service equipment; prior food industry experience is strongly preferred., • Ideally, 810 years of experience in food manufacturing as a Maintenance Leader., • A degree is not required for candidates with substantial field experience., • Must be available and responsive to after-hours calls, including 24/7 availability.

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Cosmetic Packaging Manufacturer is looking for a Production Supervisor for their Newark, NJ Plant SUMMARY: Supervise and lead Deco and Frosting production teams that focuses on optimizing processes and improving production efficiency. Support Spray department as needed. Supervise and schedule productions according to plant priorities ensuring compliance under the HSE guidelines, quality and right on time. DAILY ACTIVITIES AND RESPONSIBILITIES: · Daily resources allocation, making production plans to achieve efficiency, quality and customer satisfaction. · Production scheduling. · Analyze production data to identify areas for improvement. · Implement solutions using lean manufacturing tools and different methodologies to streamline processes, enhance safety, quality, productivity and reduce waste. · Fine-tune processes to achieve the highest level of efficiency. · Lead continuous improvement projects, including planning, execution and monitoring final results. · Develop and create new standard operational procedures. · Provide training to employees on new practices, methodologies, standard operation procedures and tools. · Track and monitor industrial KPI’s. · Work directly with people, materials, equipment and manufacturing processes to deliver site performance and KPI’s. · Work with quality engineers to address manufacturing non conformances and implement effective corrective and preventive actions with root cause investigations. · Ensure implementation of new primary packaging projects and new products. EXPERIENCE, SKILLS, ABILITIES: · Must have Glass Manufacturing experience · Production scheduling knowledge · Decorating processes knowledge such as silk screening, spraying and frosting · Use of Lean Manufacturing tools · Bilingual Spanish preferred · Reliability and precision · Priority management · Stress management · Results oriented · Ensure operational excellence · Ensure and promote safety rules · Supports an efficiency-driven culture within the production departments · Complies with operational excellence and quality systems · Promotes teamwork · Innovative and proactive approach · Work Schedule: Monday-Friday 8:00am-4:30pm · Reports to Director Operations and Engineering . Direct hire, full benefits, team environment, very stable company Company DescriptionSystem One, the recruiting company for this client is a leader in staffing solutions and recruiting. Our team has collectively over 75 years of recruiting expertise. System One has national exposure with over 50 offices and clients in every state. Each year, we place thousands of professionals in contract and direct hire roles with the nations top employers. Our recruiters have years of experience in professional, industrial and technical environments; thus, we have the contacts, experience and resources to make great career matches.System One, the recruiting company for this client is a leader in staffing solutions and recruiting. Our team has collectively over 75 years of recruiting expertise. System One has national exposure with over 50 offices and clients in every state.\r\n\r\nEach year, we place thousands of professionals in contract and direct hire roles with the nations top employers. Our recruiters have years of experience in professional, industrial and technical environments; thus, we have the contacts, experience and resources to make great career matches.

Job Description The Vibration Test Technician will assist in setting up, conducting, and documenting vibration testing for Valcor Space products. Collaborating with Engineers, they’ll assist in designing fixturing, integrating new products, perform vibration testing, and report results to verify product quality in a fast-paced production lab environment. Duties/Responsibilities: • Operate Electrodynamic Vibration systems as well as pneumatic systems to test the manufacture quality and overall dynamic response of valves, valve systems, and components., • Use basic hand tools to set up and run vibration and pneumatic testing of Valcor Space hardware., • Read and interpret technical documentation, such as procedures, drawing, and process travelers, appropriately., • Ensure test software is properly programmed to meet test requirements., • Work with Valcor Dynamics Test Engineer to understand dynamic concepts and product behavior., • Use critical thinking and understanding of troubleshooting steps to adjust and perform tests accordingly., • Create detailed documentation of all testing performed., • Employ Lean Manufacturing principles and initiatives if/when necessary, • Maintain a well organized and functional vibration lab, • Troubleshoot, repair, and/or report any equipment in need of repair to supervisor or applicable engineering group., • Ensure compliance with all safety, quality, maintenance, and company policies and procedures, • Working knowledge of vibration testing and applicable industry standards, • Actively participate in relevant team meetings, improvement programs, and initiatives to contribute to the achievement of company objectives., • Communicate effectively with internal and external stakeholders at all levels, • Maintain a clean, secure, and well-maintained work area., • Complete special projects, miscellaneous assignments, and related duties as needed., • High school diploma or equivalent, • Mechanical aptitude and the ability to understand and work with technical documentation., • Ability to work in a fast-paced environment and follow procedures while maintaining a detail-oriented workflow., • Ability to drive and execute against a delineated test schedule, • Effective verbal/written communication skills required for interacting with all levels of personnel within the organization., • Must not have vision impairment beyond usage of corrective lenses., • Often required to stand, squat, sit, bend, turn, balance, and move freely within the facility and around equipment to handle parts and set up tests. Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionCompany Description American Iron & Metal (AIM) is a family-owned company and recognized global leader in the metal recycling industry with more than 125 sites and 3500 employees worldwide. We have continued to prosper for the last eight decades (we just celebrated our 86th birthday!) thanks to the dedication of our employees and the ongoing trust and support of our customers. Become part of team AIM, a growing team with an entrepreneurial spirit who has over the years evolved into a successful and multifaceted company with business divisions that include metal recycling, decommissioning and demolition, auto-parts sales and recycling, manufacturing of solder assemblies, construction waste recycling, and production of customized industrial and mining products. We take pride in doing good things for the environment to help create a greener, more sustainable future for all. It’s simple; we do it right. We AIM for excellence. Job Description Exciting Opportunity: Become Our Next Account Manager! Are you ready to roll up your sleeves and make a hands-on impact in the metal recycling industry? We’re on the lookout for a physically active and dynamic Account Manager to join our dedicated team! In this role, you’ll engage directly with catalytic converter suppliers in your territory, ensuring we source these critical components at competitive prices while providing exceptional customer service. This is an opportunity to contribute to our company’s growth and success through direct, physical engagement in the field! Work Setup: Home-based office with frequent travel and on-site visits What You’ll Do: * Build Strong Partnerships: Forge and maintain robust relationships with both new and existing catalytic converter suppliers. Be the friendly face they can rely on for exceptional service and support, often in person. * Savvy Purchasing: Actively seek out potential suppliers to procure catalytic converters at advantageous prices, engaging in physical site visits to assess their operations and establish rapport. * Bid Management: Prepare and submit bids for quotes, calculating necessary resources and gathering data during on-site visits to ensure our offerings are competitive and compelling. * Supplier Insights: Regularly connect with suppliers face-to-face to understand their challenges and needs, fostering opportunities for mutual growth and collaboration. * Market Awareness: Stay informed about the latest market trends, competitor activities, and pricing developments through active field engagement to refine our purchasing strategies. * Negotiation Expertise: Evaluate catalytic converters based on market factors and conduct negotiations directly with suppliers during on-site interactions, ensuring beneficial terms for both parties. * Quality Assurance: Perform detailed inspections of purchased catalytic converters on-site to verify authenticity and compliance with regulations, ensuring accurate record-keeping. * Physical Inspection and Lifting: Safely lift and inspect catalytic converters to assess their condition and quality, ensuring that all purchased items meet our standards. * Data Analysis: Monitor sales data and market trends, providing regular reports and forecasts based on insights gained during your physical interactions with suppliers. * Team Collaboration: Work closely with our operations and logistics teams, ensuring smooth coordination of purchasing, processing, and shipping activities through direct collaboration. * Compliance Commitment: Stay updated on relevant regulations and compliance standards, ensuring our operations meet environmental and safety requirements through hands-on oversight. * Education & Guidance: Help suppliers and customers understand the value of recycling catalytic converters by providing support and guidance throughout the recycling process, often through in-person discussions. If you’re ready to take the next step in your career and make a tangible impact in the recycling industry, we want to hear from you! Join us in our mission to promote sustainability and drive success together! Qualifications To join our team: • Bachelor’s degree in business, Marketing, or a related field is preferred., • Proven experience in account management, business development, or sales, preferably in the metal recycling or automotive industry., • Strong knowledge of catalytic converters, their composition, and market dynamics is desired but not required., • Excellent negotiation, persuasion, and relationship-building skills to establish mutually beneficial partnerships with suppliers., • Analytical mindset with the ability to analyze market trends, pricing data, and sales performance., • Exceptional communication and presentation skills, both written and verbal., • Strong problem-solving and decision-making abilities to address supplier concerns and resolve issues effectively., • Proficiency in using customer relationship management (CRM) software, Microsoft Office, and data analysis tools., • Self-motivated and results-oriented, with the ability to work independently and meet targets., • Knowledge of environmental regulations and compliance related to metal recycling and catalytic converters is a plus Additional Information What we offer: • A competitive wage (70,000-85,000), commision package, vacation, benefits and a 401k matching program, • The tools and support needed to be successful in your career and professional development, • A dynamic & rewarding work environment, • Base Salary + Commission Pay, Full Benefit Package

Job Description Plant Maintenance Manager Northern NJ $120,000 – $140,000 We're hiring a hands-on Maintenance Manager to lead plant-wide maintenance strategy for a well-established food manufacturing facility. This is a key leadership role with direct impact on uptime, safety, and operational efficiency. What You'll Do: * Lead the Maintenance Department across two shifts, including mechanical, electrical, and building systems * Develop and drive preventive and predictive maintenance programs * Oversee equipment reliability, downtime reduction, and plant utility systems * Work closely with Operations and QA to prioritize repairs and support production goals * Recommend upgrades, replacements, or modifications to improve performance and reduce cost * Ensure CMMS system integrity, manage parts inventory, and control repair & maintenance budget * Lead technician hiring, development, safety training, and performance management * Manage vendor relationships and external service work as needed What We're Looking For: * 8+ years in industrial maintenance with at least 5 years in a manager-level role * Prior experience working in USDA regulated facilities * Solid experience with preventive/predictive maintenance, CMMS, and lean principles * Hands-on familiarity with packaging, processing, and utility systems * Strong leadership, team development, and communication skills * Bachelor's degree in Engineering (Mechanical, Electrical, or Industrial preferred) * Comfortable managing budgets, vendors, audits, and KPIs Preferred Experience: * Knowledge of FDA, USDA, OSHA, and relevant food safety regulations * Proficient in Microsoft Office and maintenance software (e.g., CMMS) * Able to read equipment manuals, codes, and technical drawings * Clean driving record; ability to work extended hours if needed This is a full-time, on-site role with strong visibility and impact. If you're a strategic and detail-oriented maintenance leader looking to step into a high-responsibility role in food manufacturing, we'd love to connect.

Job Description Our Facility is located in Franklin Lakes, NJ all candidates from the surrounding area are welcome to apply. This position will be in person in Franklin Lakes. Our company is seeking a skilled and precise manual Machinist to set up and operate machinery for fabricating, altering, and repairing machine parts, equipment, and tools. The ideal candidate will be able to work well under minimal supervision. You must also understand how to read mechanical blueprints, perform calculations, calibrate and maintain machinery, and make cuts with precision to create products that meet quality standards. We would prefer to hire a candidate that has attended a trade school, but we will accept experience in its place. Machinist Duties and Responsibilities • Use a variety of precision and cutting tools and equipment, such as a drill press, chop saw, lathe, and push and pull broaches, • Cut, shape, and fabricate tools and machine parts, • Read and follow blueprints, • Shearing, rolling, and forming sheet metal, • Ensure all work meets quality standards, instructions, and specifications, • Understand and comply with industry regulations, • Previous experience in machinery or other related fields, • Familiarity machine tools and equipment, • Strong analytical and mathematical skills, • Strong attention to detail, • Sheet Metal experience is a plus, • High school diploma or GED certificate; trade school preferred, • The ability to perform basic math and follow instructions, • Physical fitness and the ability to lift 50 pounds, • Mechanical aptitude to use a variety of industry tools and machinery, • Strong analytical skills, precision, and attention to detailCompany DescriptionMETO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection. We specialize in the specialize in working with the pharmaceutical and food industries.METO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection.\r\n\r\nWe specialize in the specialize in working with the pharmaceutical and food industries.

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: The Inside Sales Representative- HVAC Equipment provides world-class Customer Service by exceeding customer expectations using advanced soft skill techniques, advanced product and system knowledge, and timely yet thorough problem-solving/dispute resolution for the AAF International New Jersey Branch to increase service business in the market. Key Accountabilities: Sales Duties • Build and maintain relationships with existing and prospective clients, including contractors, and consulting engineers., • Maintain Job board of all projects in Salesforce., • Communicate with manufacturers for equipment and filter pricing., • Follow up on bids with contractors to close and win the job., • Prepare Equipment Submittals, • Review project specifications, blueprints, and HVAC system requirements to develop accurate cost estimates for air filtration products., • Prepare detailed proposals and quotations based on customer needs and project budgets., • Collaborate with the operations team to ensure feasibility and accuracy of quotes., • Maintain up-to-date pricing and product knowledge to provide competitive and reliable estimates. Requirements: Position Requirements: • Bachelor’s degree in business, engineering, or a related field (or equivalent experience)., • 1-3 years of sales or estimating experience, preferably in HVAC, air filtration, or a related industry., • Strong technical aptitude with the ability to read blueprints and understand HVAC system requirements., • Excellent interpersonal and communication skills., • Proficiency in Microsoft Office Suite; experience with CRM software is a plus., • Self-motivated with strong organizational and time-management skills.

Job Description Job Summary: As a Field Market Development Manager, you will be both personally responsible for and well rewarded for the ongoing success of the company through one of the most exciting, influential, and rewarding positions! You will be involved in the development and execution of the go-to-market strategy that ensures alignment of Customer and Prospect needs with the tremendous capabilities of the Midstate Industrial Maintenance family of companies. In addition to profitable revenue growth with core accounts, additional measurements of success include the expansion of our vertical market segment client base as well as the extension of company reach into new geographies. The chosen {FMD} candidate will be a member of an elite team that supports the execution of the Market Development Manager’s {MDM}strategy and multi-year business plan. This is an extremely attractive and financially rewarding position that also offers a defined path to career growth through the successful development of profitable revenue growth and vertical market share gains. Key Responsibilities: • Develop and maintain strong relationships at multiple levels within a customer organization., • Capable of developing and executing a plan that drives constant contact and influence with existing customers and key prospects at multiple levels throughout an organization., • Able to identify, pursue, and capture profitable revenue opportunities., • Ability to grow one or more levels into the Mid-State Industrial Organization, • Prepare sales presentations or proposals to explain service specifications., • Consistently and accurately provide sales and other reports as required., • Attend sales or trade meetings as required to gain information and contacts., • Consult with clients to resolve any post-sale issues., • Conduct research of industrial, manufacturing and processing industries and utilizing findings do develop a strategic approach to build market share., • Bachelor’s degree is preferred, experiences may be considered in lieu of degree. Experience: • Prior Sales or Marketing experience in Industrial Maintenance. Knowledge Skills & Abilities: • Exceptional work ethic and drive to succeed., • Execution and results mindset, • General knowledge of heavy industrial markets is preferred., • Intermediate computer skills required in Microsoft Office., • Ability to thrive in a fast-paced, exciting, and demanding environment. Work Location and Travel: • This position requires travel to various client worksites within the United States., • Overnight travel may be required at times. Work Environment: • This is a full-time position. Days and hours of work vary (Monday – Sunday with some overnight work) and overtime is frequently required., • The working environment is occasionally in harsh elements (hot / humid and/or cold temperatures, rain, etc.) Industrial environments often have exposure to hazardous chemicals, moving heavy equipment / machinery, and other safety-sensitive hazards / risks. Must always be alert and able to safely perform the essential duties of the job without risking harm to oneself or others., • Mid-State maintains a firm commitment in providing a safe and healthy work environment for its employees and quality services to its clients. Mid-State is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen and job-related employment physicals. Must also submit to a post-offer / pre-employment background check. Physical Requirements: Talk/Hear: The ability to communicate effectively with clients, stakeholders, and team members, as well as listen to customer feedback and market insights. Stand/Sit: Involves extended periods of sitting during meetings and desk work and standing during presentations or field visits. Walk: Involves walking to visit clients, attend industry events, and move around the office or other facilities to coordinate activities and interact with team members. Use hands/fingers to handle or feel: Involves frequent use of hands and fingers to operate office equipment, write reports, prepare presentations, and manage electronic communications and documents. Climb: Occasionally required to access higher areas for inspections or evaluations in retail environments or when setting up displays and promotional materials. Stoop, kneel, crouch or crawl: Occasionally required to perform tasks in confined spaces, such as setting up equipment or accessing low storage areas for product evaluations. See: Required to assess market trends, analyze reports, review promotional materials, and evaluate client presentations and marketing strategies. Carry, weight, Lift: Occasionally involves lifting to transport marketing materials, promotional items, and equipment for events or presentations, and manage physical resources needed for market development activities. Exposure to work: Occasionally required to engage in physical activities that involve moving the whole body. Must be legally authorized to work in the United States. Mid-State participates in E-Verify. Go to to learn more.

Job Description Industry: Tools and Supplies for Jewelry, Industrial, Dental, and Hobby Are you a skilled bench jeweler looking to transition into a new career? We are a leading distributor of tools and supplies for the Jewelry, Industrial, Dental, and Hobby industries, providing high-quality products to professionals and hobbyists alike. We are seeking a Product Manager to help us expand and refine our product offerings. This is a unique opportunity to leverage your hands-on jewelry-making experience and industry knowledge to shape the products and tools used by makers, creators, and innovators worldwide. What You’ll Do · Product Strategy & Market Insights · Product Selection & Development · Customer Engagement · Collaboration & Launches Qualifications: · 3+ years of experience as a bench jeweler or in a similar hands-on role. · Knowledge of tools, materials, and techniques in the Jewelry, Industrial, Dental, or Hobby industries. · Strong communication and collaboration skills. · Analytical mindset with the ability to interpret market trends and customer feedback. · Excellent organizational and project management skills. Preferred: · Familiarity with product evaluation and manufacturing processes. · Passion for tools, innovation, and improving the customer experience. Why Join Us? · Work with a trusted distributor that serves a diverse range of industries. · Play a key role in shaping the tools and supplies used by professionals and hobbyists. · Collaborate with a passionate team dedicated to quality and innovation. · Enjoy opportunities for growth and professional development.

Job DescriptionJob Summary: Maintenance Supervisor We are seeking a knowledgeable and hands-on Maintenance Supervisor to lead and train a team of mechanics and technicians in both electrical and mechanical maintenance. This role is responsible for ensuring equipment reliability, safety compliance, and continuous improvement in maintenance practices through effective training and supervision. Key Responsibilities: • Supervise daily maintenance operations, including electrical and mechanical systems., • Develop and deliver training programs for mechanics and technicians on equipment maintenance, troubleshooting, and safety procedures., • Lead preventive and corrective maintenance efforts to minimize downtime and extend equipment life., • Diagnose and resolve complex mechanical and electrical issues., • Maintain accurate maintenance records and ensure compliance with regulatory standards., • Monitor and manage inventory of tools, parts, and supplies., • Collaborate with engineering and operations teams to support production goals., • Conduct performance evaluations and provide coaching to maintenance staff., • Implement and enforce safety protocols and ensure team adherence.Qualifications:, • High school diploma or GED required; technical certification or associate degree in electrical or mechanical engineering preferred., • Minimum 5 years of experience in industrial maintenance, with at least 2 years in a supervisory or training role., • Strong expertise in electrical systems (PLC, wiring, motors) and mechanical systems (hydraulics, pneumatics, conveyors)., • Experience developing and delivering hands-on training., • Proficiency with CMMS and maintenance documentation. The pay range for this position is $90000.00 - $125000.00/yr. full health benefits - dental, vision, medical 401k referral bonus attendance bonus - monthly and quarterly holidays, sick pay, pto Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Sep 5, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Now Hiring: Mechanical Engineer Location: Clifton, New Jersey Employment Type: Direct Hire Salary Range: $100,000-$135,000 Our client, a leading manufacturer of institutional-grade furniture, is looking to add a highly skilled and detail-oriented Mechanical Engineer to their team in Clifton, NJ. This is a direct hire opportunity offering competitive compensation and the chance to work with a company known for exceptional product quality, a signature Quick-Ship program, and industry-leading customer service. Their products are distributed through a wide network of dealers and can be found in major catalogs and online platforms across North America. Position Overview The Mechanical Engineer will support product development and engineering operations with a strong focus on CAD modeling, 3D scanning, and data management. This role is essential to maintaining the accuracy and consistency of engineering documentation, especially for mobile table and casework product lines. You’ll collaborate with Product Management, Engineering, and Factory teams to refine designs, implement changes, and introduce new products to market. Key Responsibilities * Digitize furniture components using 3D scanning technology; integrate scanned models into SolidWorks. * Compare scanned parts with existing CAD and production drawings; resolve discrepancies and update documentation. * Prepare and manage Engineering Change Notices (ECNs) to communicate revisions effectively to factories. * Organize and maintain part and assembly files within the Product Data Management (PDM) system, ensuring version control and data reliability. * Standardize file naming and directory structures to improve accessibility and scalability. * Assist in migrating legacy products into the PDM system. * Research and analyze competitor products for music and science casework lines. * Design and model new casework products based on market trends and customer feedback. * Collaborate cross-functionally with internal teams to align product specs with production capabilities. * Provide technical support and documentation best practices across departments. Required Qualifications * Bachelor’s degree in Mechanical Engineering, Industrial Design, or a related field. * 6+ years of experience in product design and manufacturing, with expertise in SolidWorks and PDM systems. * Hands-on experience with 3D scanners and incorporating scanned data into CAD models. * Proven ability to create and manage ECNs in a manufacturing environment. * Meticulous attention to detail and a strong focus on data accuracy. * Ability to manage multiple projects and deadlines in a fast-paced environment. * Familiarity with sheet metal, tubing, and welded assemblies is a plus. * Strong reverse-engineering and analytical skills. * Independent, self-driven, and comfortable working in a CAD/PDM-heavy role. * Must be able to work on-site at the Clifton, NJ facility. Preferred Skills * Experience with furniture product design is a strong plus. * Familiarity with school/institutional furniture standards. * Knowledge of Lean manufacturing and continuous improvement methodologies. Why Join? * Competitive salary and direct hire opportunity * Work with a respected brand known for reliability and quality * Play a vital role in shaping next-generation institutional furniture products * Collaborate with a committed, expert team in a stable and growing company If you’re passionate about precision, innovation, and high-impact engineering, this role offers a unique opportunity to contribute meaningfully to a thriving organization. Presented by TriMech Staff Augmentation TriMech Staff Augmentation is a specialized engineering staffing partner connecting top-tier technical talent with leading organizations. With a deep understanding of engineering disciplines and industry needs, we provide tailored recruiting solutions—including direct hire and contract placements—to ensure the right fit for both candidates and clients. Interested or know someone who fits this description? Apply now or reach out to our team at Company DescriptionTriMech Services specializes in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skill sets of our candidates specific industries.TriMech Services specializes in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skill sets of our candidates specific industries.

Job Description Abacus Corporation is a family-owned leader in workforce and talent solutions with over 80 years of experience. We specialize in connecting skilled professionals with direct hire opportunities across industries like industrial, security, healthcare, finance and professional services. Known for our supportive culture and long-standing client partnerships, Abacus offers more than just a job—we provide a path to lasting career growth with trusted employers nationwide. Job Summary: We are seeking a motivated and detail-oriented Staffing Specialist to join our team with a focus on light industrial recruitment. This role is responsible for sourcing, screening, placing, and managing candidates for warehouse, manufacturing, assembly, and other light industrial positions. The ideal candidate thrives in a fast-paced environment, has strong interpersonal skills, and understands the unique demands of industrial staffing. Key Responsibilities: * Recruitment & Sourcing: * Develop and implement effective recruiting strategies to attract qualified light industrial candidates. * Use job boards, social media, community resources, and referrals to source candidates. * Maintain a pipeline of skilled candidates for future client needs. * Screening & Placement: * Conduct phone and in-person interviews to assess skills, experience, and fit for various roles. * Match candidates to appropriate job openings based on skill set and client requirements. * Ensure all candidates meet hiring criteria, including background checks, drug screenings, and safety training. * Client Relations: * Partner with clients to understand their staffing needs, work environments, and expectations. * Provide timely and effective staffing solutions to ensure client satisfaction. * Conduct site visits and maintain regular communication with clients to ensure placement success. * Onboarding & Compliance: * Manage the onboarding process including new hire paperwork, orientation, and timekeeping procedures. * Ensure compliance with federal, state, and local employment laws and company policies. * Monitor employee performance and address any concerns with corrective actions or coaching. * Administrative Duties: * Maintain accurate and up-to-date candidate and client records in the applicant tracking system (ATS). * Track placement data, attendance, and turnover metrics for reporting purposes. * Assist with payroll processing and timesheet collection as needed. Qualifications: * Experience: * Minimum 1–3 years of staffing or recruiting experience, preferably in the light industrial sector. * Skills & Abilities: * Strong organizational and time management skills. * Ability to multitask and prioritize in a fast-paced environment. * Excellent communication and interpersonal skills. * Knowledge of employment regulations and hiring best practices. * Technical Proficiency: * Experience with applicant tracking systems (ATS) and HRIS platforms. * Proficient in Microsoft Office (Word, Excel, Outlook). * Education: * Associate or Bachelor's degree in Human Resources, Business Administration, or a related field preferred; equivalent experience considered. Working Conditions: * Office-based role with frequent visits to client sites and industrial workplaces. * May involve occasional early morning or evening hours to meet client or candidate needs. Compensation: Competitive salary plus performance-based incentives. Benefits include health insurance, paid time off, and professional development opportunities.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Maintenance & Reliability Manager is responsible for ensuring equipment reliability, maximizing asset uptime, and leading the day-to-day maintenance operations at our food manufacturing, warehousing, and distribution site. This role will develop and execute preventive and predictive maintenance programs while supervising and developing a team of maintenance technicians, ensuring a safe, efficient, and compliant operation aligned with our food safety and operational excellence objectives. What you'll do: Maintenance Management • Plan, schedule, and supervise daily maintenance activities, ensuring timely completion of reactive and preventive maintenance work., • Assign, train, and develop a team of 4 maintenance technicians, fostering a culture of safety, food safety, and continuous improvement., • Manage and optimize parts inventory, maintenance spend, and vendor/contractor relationships., • Ensure maintenance activities comply with OSHA, GMP, SQF, and company safety and food safety standards., • Develop, implement, and refine preventive and predictive maintenance programs., • Analyze equipment performance data to identify and resolve chronic issues., • Lead root cause analysis (RCA) and failure mode & effects analysis (FMEA) on equipment failures., • Develop and track maintenance KPIs (MTBF, PM compliance, downtime, etc)., • Partner with production and FSQA teams to support operational and food safety objectives., • Lead small capital projects focused on equipment upgrades, reliability improvements, and automation., • Maintain accurate documentation, including equipment records, work orders, and spare parts inventories., • Ensure compliance with all OSHA, GMP, SQF, and company safety standards., • Lead and participate in safety audits and initiatives related to equipment and maintenance activities., • Support the EHS team in identifying engineering controls to reduce risk. What you'll bring: • Bachelor's degree in Mechanical, Electrical, Industrial Engineering, or related field; or equivalent experience., • 5+ years of experience in reliability, maintenance engineering, or similar roles within food manufacturing, distribution, or a related industry., • Supervisory or team lead experience preferred., • Experience with CMMS systems and maintenance planning., • Familiarity with predictive maintenance technologies (vibration analysis, thermography, oil analysis), • Knowledge of root cause analysis and continuous improvement methodologies (Lean, Six Sigma), • Strong problem-solving, analytical, and communication skills., • Commitment to safety and food safety in a manufacturing environment., • Strong financial acumen and experience managing operational budgets and capital investments., • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $115,000-$130,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at .

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Education: • Minimum – High School Diploma, • Preferred – Vocational School Graduate, • Perform assembly and performance testing of electro-mechanical fluid control devices. Comply with essential procedures, blueprints, and associated schematics to ensure safety and quality of product., • Operate, develop, and maintain high pressure test systems, to include pneumatic, hydraulic, and calibration fluid test stands and pumps., • Experience analyzing blueprints and developing procedures., • Demonstrated ability to assemble electro-mechanical hardware., • Experience with high pressure testing with various fluids and gases., • Ability to conduct electrical tests including, dielectric and insulation resistance testing., • Experience soldering to Class B standards. Class A experience preferred., • Computer literacy, Microsoft office, word, and excel experience., • Experience operating in controlled clean-room environments., • Experience conducting clean-room particulate analysis and data collection., • Manufacturing processing experience or machining experience a plus., • Ability to operate diagnostic testing equipment: Oscilloscopes, Lab View, etc., • Ability to systematically troubleshoot and repair hardware., • Ability to lift/move up to 50lbs., • Team oriented and willingness to work in a diverse team environment., • Ability to collaborate in cross-functioning teams to meet customer expectations., • Ability to work independently, without direct supervision., • Willingness to train and mentor junior technicians. Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. * Team-Focused Culture: Work with a skilled, collaborative group of industry pros. * Career Growth: Opportunities to develop and move up in a growing company. * Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. The job location is at 2 Lawrence Road, Springfield, NJ 07081 Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries with over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 75,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety, and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: We are currently seeking a well-organized individual with excellent written, verbal, and computer communications skills to join our sales force as a Sales Engineer in the HVAC new construction/plan and specification market for the New York City/Long Island region. Key Accountabilities: The successful candidate will work developing specifications with the professional engineering community, bid, close, and service General, Mechanical, and Sheet Metal Contractors as well as end-users in the territory. Ideally, the candidate will establish a working home office as well as maintain office space in our New Jersey facility. Requirements: Position Requirements: Bachelor's degree, preferably including technical coursework, a familiarity with the plan and specification sales process, and a desire to achieve sales success in the disciplines of HVAC, Process, or Mechanical Equipment. While an engineering degree is not a requirement, candidates with up to (3) years of successful sales experience of mechanical equipment in the field will be strongly considered.