International security jobs in New Rochelle, New YorkCreate job alerts

U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move. As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession. Typical assignments include: • Enforcing customs, immigration, and agriculture laws and regulations., • Facilitating the flow of legitimate trade and travel., • Conducting inspections of individuals and conveyances., • Determining the admissibility of individuals for entry into the United States; and You will be asked to provide your preference for one of the following mission-critical locations: Nogales, and San Luis, AZ; Calexico, Los Angeles, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, DC; Miami and Orlando, FL; Atlanta, GA; Hagatna, Guam; Honolulu, HI; Chicago, IL; Calais, Fort Kent, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit and Port Huron, MI; Baudette, Grand Portage, International Falls, and Warroad, MN; Del Bonita, Morgan, Raymond, Roosville, and Wild Horse, MT; Newark, NJ; Alexandria Bay, Buffalo, Champlain, Massena, Ogdensburg, Queens, and Trout River, NY; Dunseith, Hansboro, Neche, Pembina, and Portal, ND; Philadelphia, PA; San Juan, PR; El Paso and Houston, TX; Christiansted, U.S. Virgin Islands; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine Oroville, Seattle and Sumas, WA. The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO). Salary – and Duty Location Recruitment Incentives – and Benefits Annual Base Salary for newly appointed CBPOs varies as follows: Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary. Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency. Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering. LOCATION INCENTIVES: If you accept one of the duty locations listed below, you may be eligible to receive an additional 15%-25% of your salary each year for the first three (3) years of employment in addition to any overtime pay. If you accept the duty location of San Francisco, you may be eligible to receive an additional 25% of your salary each year for the first four (4) years of employment in addition to any overtime pay. Duty locations offering 25% recruitment incentives: Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Key West, FL; Calais and Jackman, ME; Detroit, MI; Grand Portage, MN; Raymond and Sweetgrass, MT; Dunseith and Pembina, ND; Beecher Falls, VT; Oroville, WA Duty locations offering 15% recruitment incentives: Honolulu, HI; Portal, ND; Derby Line and Richford, VT; Blaine, WA Duty location offering 10% recruitment incentives: Calexico, CA Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both. Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: • Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods., • Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States., • Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security. Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application. Other Requirements: Citizenship: You must be a U.S. Citizen to apply for this position. Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years. Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d). Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible. Formal Training: You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position.

Job Description BASIC FUNCTIONS The Accounting Administrator is responsible for supporting the financial operations of the organization by performing a variety of accounting and administrative tasks. This role ensures the accuracy, timeliness, and organization of financial records while assisting in the day-to-day accounting functions. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES Accounts Receivable • Send Customers Monthly Billing Statements., • Update Customer Profiles to ensure billing information is up to date and all communication with customers are noted on accounts., • Prepare and send out Customer invoices as needed., • Assist in researching misapplied payments, overpayments, deductions/credits and work with Finance staff to reconcile accounts., • Assist Compliance and Sales Department with completing Customer Surveys., • Assist Finance Department in assessing Credit worthiness of existing or prospective clients following CTG’s credit policy., • Assist and act as backup for extending credit to customers., • Manage freight charges for all carriers (FEDEX, UPS, & DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly., • Manage Month End Credit Card Reconciliation., • Assist with updating banking details on Vendor profile., • Process Vendor invoices received via AP Mailbox and USPS., • Establish and maintain relationships with new and existing Vendors., • Process payment methods such as Checks (including CODs), Wires, and ACHs. This includes prepayments made to vendors., • Review and post “On-Hold” invoice vouchers daily to ensure payables are current., • Perform accurate data entry into computer software programs., • Support Finance Team on various accounting tasks including ad-hoc analyses., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules, and policies. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • A minimum 1-3 years of accounting/ finance experience, required., • Bachelor’s degree in accounting from an accredited university, required., • Advanced Skills in Microsoft Office Applications (PowerPoint and Excel), required., • Excellent verbal and written communication skills., • Knowledge of GAAP and basic accounting principles., • Strong attention to detail with a dedication to accuracy., • High degree of familiarity with accounts receivable functions., • Excellent Analytical Skills and ability to analyze large sets of data.

You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation. Enforcing laws and regulations relating to importing, exporting, and/or international shipping.

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade. Note: Your opportunity for final selection is i

Job Description BASIC FUNCTIONS Prepare all incoming and outgoing shipments to customers and vendors. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Ensures Shipping and Receiving Department has capacity and capability to meet the needs of the business, • Prepares shipments for postal or commercial conveyance; determines most economical and efficient shipping method; selects appropriate shipping container; packs items to ensure safe delivery., • Prepares bills of lading; checks items to be shipped against picking tickets to ascertain that quantities, destination, and routing are correct., • Receives and unloads incoming materials and compares information to receiving reports to verify priority; may process return shipments from customers., • Packages, labels, insure, and/or logs inventory which is shipped or received., • Inspects shipments for damages or defects; records discrepancies or damages and notifies supervisor and/or purchasing personnel., • Initiate and follow Carrier Transit Claims from submission to conclusion., • Package items for safe delivery to customers., • Check for special customer requirements for shipping., • Organize materials in shipping area., • Perform/Assist with receipt of incoming shipments., • Update Chemtrec portal with SDS documentation, • Assist accounting with shipping invoices. Be able to pack and ship hazmat materials, including Haz Shipper software., • Comply with all requirements of the environmental management system., • Delegate workload to shipping/receiving associates., • Work with shipping company drivers on any changes to pick up times., • Communicate with internal departments on any open issues in a timely manner., • Order materials needed for the shipping department,, • Routinely interface with global trades manager to ensure international shipment conformance., • Training S&R department on procedures and ensuring the teams skill competencies are able to support the business., • Maintains shipping paperwork. (Boxed/Scanned), • Participate in S&R performance reviews, • Schedule work hours for employees to ensure coverage and reduce OT., • Adhere to Safety Manual requirements for Supervisor/Manager, • Ensuring Shipping and Receiving is audit ready at all times., • Inform Director of Logistics of all work stoppages so that he can perform root cause analysis., • Maintain and contribute to a positive environment in the shipping department. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily/Weekly/Monthly Chemtrec fillings, • Daily inbound and outbound freight Report, • Daily Drop off and Pickup Time Scheduling, • Hazmat Shipment Compliance, • Freight Shipment OTD, • QT Training of S&R new hires completed in 90 days, • QT Training records current for shipping and receiving team members EDUCATION / EXPERIENCE / COMPENTECY • High School Diploma, • 2-4 years of relevant experience in related field(s), • Ability to pay attention to great detail., • Prior knowledge of shipping/receiving techniques., • Proven/ demonstrated ability to lead a team.

Job Description BASIC FUNCTIONS As an Inside Distributor Sales Representative at Blue Raven Solutions, you play at pivotal role in ensuring our customers receive exceptional service and support. This entry-level position is designed for individuals with a passion for sales, excellent communication skills, and a positive attitude. Your primary responsibilities include quoting prices for in-stock items, managing a designated customer base, responding to heavy email and phone inquiries, and processing sales orders with precision. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES · Support the creation/building of long-term relationship with customers. · Performs order entry, reviews and processes orders, and create credit requests. · Create processes and maintain a variety of reports pertaining to specific clients. · Provide timely and accurate quotes for in-stock items. · Respond promptly to heavy email and phone activity, demonstrating a positive, friendly, and helpful attitude in all customer interactions. · Manage a defined customer base, establishing and maintaining strong relationships by proactively addressing customer needs and providing tailored solutions. · Efficiently process sales orders, ensuring accuracy and timely delivery while collaborating with various teams. · Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues. · Identifies delays or problem areas, and suggests solutions for resolving issues. · Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures. · Provide essential administrative support to the sales team. · Maintain customer database. · Help track individual customer quality and delivery ratings. · Comply with all customer quality requirements. · Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner. · Follow established departmental policies, procedures, objectives, and safety standards. · Perform other related duties and personnel backups as assigned and contributes to team effort. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPENTENCY · High School Diploma – College education preferred. · Strong Microsoft Outlook skills · Strong attention to detail. · Strong follow-up and closing skills to drive sales opportunities to completion. · Customer empathy/ Superior customer service skills. · Highly organized. Job Type: Full-time Salary: $60,000.00 - $75,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Day shift Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job DescriptionOn-site Interpreter (Independent Contractor) Baystate Interpreters, Inc. is seeking dedicated and professional interpreters to join our team as 1099 independent contractors. In this vital role, you will facilitate communication in various settings, enabling effective interactions in education, medical, legal, and community environments. Our ideal candidates are flexible, reliable, and possess a keen understanding of the cultural nuances involved in interpreting. This position offers competitive per diem rates and the opportunity to broaden your skill set, particularly in specialized fields such as medical and legal interpretation. About Us At Baystate Interpreters, Inc., we are bridging communication gaps by offering precise and dependable language services anytime, anywhere through innovative solutions. Founded in 2001, Baystate Interpreters, Inc. provides essential interpreting and translation services that improve the lives of the communities we serve. We accomplish this by ensuring comprehensive language access in over 350 languages, serving more than 2,200 clients with a diverse, highly skilled team and a network of experienced contract interpreters. Excellence in interpretation is key to our collective success, and it is achieved by partnering with the most skilled and highly qualified interpreters in the industry. Our commitment to quality and interpreter training can help you jumpstart your career as an interpreter today! Key Responsibilities: • Adhere to all Baystate Interpreters, Inc. policies related to information security and confidentiality including but not limited to HIPAA, FERPA, GLBA, and other relevant regulatory requirements., • Provide accurate on-site interpretation between English and designated target languages., • Follow interpreter protocols and procedures as required by Baystate Interpreters, Inc. and respective clients., • Follow all interpreter ethics standards, including those set by the IMIA (International Medical Interpreters Association), the National Council on Interpreting in Health Care (NCIHC), the American Translators Association (ATA), the National Association of Judiciary Interpreters and Translators (NAJIT), and the International Organization for Standardization (ISO). Uphold principles of confidentiality, accuracy, impartiality, professionalism, and cultural competence in every assignment., • Establish and maintain positive, professional interactions with patients, customers, healthcare providers, and clinical staff., • Continuously improve specialized vocabulary and subject matter knowledge (e.g., medical, legal, social services) to meet client needs., • Demonstrate professionalism, neutrality, and confidentiality throughout the interpretation process., • Provide high-quality interpretation, ensuring no omissions or additions, while adhering to established industry standards., • Exhibit strong interpersonal skills and customer service while assisting clients during sensitive interactions., • Must be legally authorized to work in the U.S., • Must be 21 years of age or older (in compliance with applicable legal and contractual requirements for this role.), • Proficiency in English and at least one additional language., • Strong communication skills and a composed demeanor in challenging situations., • Flexibility and reliability to meet the demands of per diem assignments., • Excellent listening, retention, and note-taking skills for accurate interpretation., • Familiarity with HIPAA and confidentiality regulations., • Competitive pay: Starting at $25.00 per hour (with potential for higher rates based on experience and specialization)., • Flexible scheduling: Accept assignments that fit your availability.

Job Description BASIC FUNCTIONS Facilitates accurate and timely processing of vendor invoices for inventory and non-inventory items. Also, scan and file all paper financial statements into electronic format. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES · On a daily basis, facilitate accurate and timely processing and posting of all of accounts payable invoices daily, obtaining approvals and troubleshooting issues when needed. · Establishing and maintaining relationships with new and existing vendors · Manage freight charges for all carriers (FEDEX UPS, and DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly. · Reconcile and communicate un-invoiced receiving (UIR) and open receivers’ transactions on a weekly basis. · Process credit memo, adjustments, and journal entries. · Record commission charges. · Manage Accounts Payable folder ensuring all invoices processed by end of day. · Processing of COD payments. · Prepare COA report. · Backup AP Manager to download credit card activity from account websites, download into EPDS accounting system and code all charges weekly. · Backup AP Manager to process trade show charges in Concur. · Analyze vendor statements of accounts weekly. · Wire initiation for purchase order payments including coding into EPDS. · Processing of GS deductions · Receive, open and distribute mail by end of mail. · Performs data entry into our computer software programs. · Acts as backup to AP Manager. · Ensures compliance with company code of conduct and all applicable laws, regulations, rules and policies. · Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. · Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPETENCY · Associate degree or higher in accounting or any business-related discipline, required. · Basic proficiency in Microsoft Excel · 2 years+ experience within accounts payable discipline. · Experience processing invoices in high-volume · Experience Comparing purchase orders, prices, terms of payment and other charges. · Strong analytical skills. · Ability to compare/analyze reports. · Strong problem-solving skills, basic accounting principles knowledge, documentation skills, research and resolution skills, data analysis and multi-tasking skills. Company DescriptionBlue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description TITLE: Inside Distributor Sales Representative DEPARTMENT: SALES REPORTS TO: SR. CORPORATE ACCOUNT MANAGER, SR. ACCOUNT MANAGER FLSA STATUS: NON-EXEMPT/EXEMPT JOB DESCRIPTION REVISION: 1/24/24 BASIC FUNCTIONS As an Inside Distributor Sales Representative at Blue Raven Solutions, you play at pivotal role in ensuring our customers receive exceptional service and support. This entry-level position is designed for individuals with a passion for sales, excellent communication skills, and a positive attitude. Your primary responsibilities include quoting prices for in-stock items, managing a designated customer base, responding to heavy email and phone inquiries, and processing sales orders with precision. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Provide timely and accurate quotes for in-stock items., • Respond promptly to heavy email and phone activity, demonstrating a positive, friendly, and helpful attitude in all customer interactions., • Manage a defined customer base, establishing and maintaining strong relationships by proactively addressing customer needs and providing tailored solutions., • Efficiently process sales orders, ensuring accuracy and timely delivery while collaborating with various teams., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Provide essential administrative support to the sales team., • Maintain customer database., • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner., • Follow established departmental policies, procedures, objectives, and safety standards., • Perform other related duties and personnel backups as assigned and contributes to team effort. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Strong follow-up and closing skills to drive sales opportunities to completion., • Customer empathy/ Superior customer service skills., • Highly organized. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to learn and subsequently operate all test equipment within the Laboratory Department, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent, • 1 year of manufacturing or quality experience is a plus but not required, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Working knowledge of measurement instruments: i.e., calipers, etc., • Basic proficiency of Microsoft Excel and Word, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS The Training/Project Coordinator is a dual-role position responsible for overseeing employee training programs and managing key internal projects to support organizational growth and operational efficiency. This role will plan, implement, and track both training initiatives and project execution across departments, ensuring alignment with company goals, timelines, and budgets. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Design, schedule, and coordinate internal and external training programs., • Track training completion, maintain accurate records, and ensure compliance with company and regulatory standards., • Work with department heads to assess training needs and develop target learning plans., • Prepare training materials, manuals, and onboarding guides as needed., • Evaluate training effectiveness and recommend improvements., • Lead cross-functional projects from initiation through completion, ensuring scope, timeline, and budget alignment., • Develop project plans, assign tasks, track milestones, and provide regular updates to stakeholders., • Identify and manage project risks, issues, and changes to scope., • Facilitate effective communication between departments to ensure smooth project execution., • Prepare status reports and post-project evaluations. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES (pending) EDUCATION / EXPERIENCE / COMPETENCY • Bachelor’s degree in Business, Human Resources, Organizational Development or related field., • 3+ years of experience in training coordination, project management, or a similar role., • Proficient in project management and learning management systems., • Project Management certification is a plus., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at times. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description TITLE: Program Management Administrator DEPARTMENT: Business Development REPORTS TO: Program Managers; Program Management Support Reps; Director, Strategic Sales; VP, Strategic Sales; FLSA STATUS: NON-EXEMPT JOB DESCRIPTION REVISION: 12/02/2024 BASIC FUNCTIONS This individual shall coordinate and provide administrative support on various projects, products, development efforts, and strategic initiatives across the organization and in conjunction with development efforts with strategic partners and outside OEM ventures. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Provide support to the program management team for all business & personal needs including: calendar management, arranging travel, arranging digital & in person meetings & drafting correspondences., • Interface daily with clients, account managers and internal departments to quickly resolve issues., • Compile, maintain & report on contract performance analytics., • Work with Program Management team to attain required Key Performance Indicators., • Performs order entry, review, track, and process orders, and create credit requests., • Manage internal customer requirements for all program management related orders., • Track individual supply chain (vendor) quality and delivery ratings., • Understand and comply with all customer quality requirements., • Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner., • Follow established departmental policies, procedures, objectives, and safety standards. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPETENCY • High school diploma (or equivalent) but college education preferred., • Strong Microsoft 365 skills, • Effective verbal communication skills, • Strong customer empathy/superior customer service skills., • Highly organized and strong attention to detail., • Ability to work independently., • Career focused, driven individuals with a professional and engaging personality wanted!, • Experience working in a fast-paced, dynamic environment is a bonus! TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN THE COMPANY’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PREREQUISITES.

Job Description This Is How We Fly At JSX, we’re not just a lifestyle carrier – we’re a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As a Quick Upgrade Captain at JSX, you’ll be at the controls of one of the most innovative aviation experiences in the industry. Your mission is to operate our aircraft safely, efficiently, and in full compliance with all regulations, all while delivering exceptional service to every flight. With typical schedules averaging 3-5 legs per day over 14-16 days per month, we prioritize work-life balance and strive to return you to your home base every night. A Day in the Life: Pre-Flight Preparation Your day begins one hour prior to departure, giving you ample time to: • Review key flight details in Traxxall, including maintenance status, NOTAMs, fuel loads, weather conditions, and routing., • Collaborate with the Captain to discuss departure and arrival strategies, including diversion planning if needed., • Operating the aircraft in full compliance with FAA regulations, JSX SOPs, and industry safety standards., • Maintain real-time communication with Mission Control (Dispatch), Ground Operations, ATC, and your Flight Attendant., • Assist with quick turn tasks, including light cabin tidying: clean tray tables, cross seatbelts, collect trash, and support the Flight Attendant as needed to ensure an on-time departure., • Participating in recurrent training and performance evaluations to maintain proficiency and grow in your career., • Step in to assist with baggage handling or other duties at smaller airports where ground support is limited., • You’re More Than a Number: At JSX, you’re a valued Crewmember, not just a call sign., • No Two Days Are the Same: Every flight brings unique challenges and opportunities to shine., • Create Memorable Moments: You’re part of the entire Customer journey, delivering hospitality in the air and on the ground. We’re looking for someone who is: • Adaptable: You thrive in fast-paced, dynamic environments, adjusting quickly to changing priorities, weather, and operational needs., • Detail-Oriented: Nothing gets past you, from preflight checks to final shutdown., • Critical Thinker: You can quickly assess situations and make sound, safety-first decisions., • Customer-Centric: You take pride in making every passenger feel welcomed and cared for., • Communicative: You share information clearly and keep everyone in the loop, from your Captain, Flight Attendant, Grounds Crew, Maintenance, Mission Control, and Customers., • Proactive: You anticipate needs, take initiative, and solve problems after they arise., • Safety-Focused: You instinctively prioritize safety in every action and hold yourself and others accountable to the highest safety standards., • In compliance with federal aviation security requirements, candidates must be U.S. citizens or U.S. nationals., • High School Diploma/GED, • Minimum 2500 fixed-wing total flight hours, • Minimum 500 multi-engine hours, • Minimum 500 turbine hours, • Minimum 100 hours within the last 12 months, • No FAA violations/accidents/incidents/suspensions, • 3000+ total time, • 1000+ multi-engine hours, • Valid FAA Pilot Certificate appropriate to the aircraft and operating position held., • Current and valid Driver’s license and Passport, • Current and valid FAA First Class Medical Certificate, • Current and valid ATP or Commercial Multi-Engine Certificate, • Current and valid FCC Radio Operator’s Permit Pay & Perks: Compensation throughout training is $150.00 (+per diem) daily, which goes up to $259.00 (+ per diem) daily on the line. You are guaranteed a 14-day minimum per month salary. For additional pay, you are eligible for Productivity Pay and quarterly bonuses. • Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer-paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost., • Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel on other major domestic & international airlines for you and your qualifying immediate family., • 401(k) match: 50% of your first 8%, • Generous PTO: Take time to recharge with our flexible PTO plan., • Pilot Perks: Uniform allowance provided to new hires with annual replenishment, along with an EFB (iPad) issued at no cost. Company paid KCM badge and Jumpseat/CASS participant. Incentive pay for being called to fly on all days past a 14-16 day average and additional hours over an 8-hour average duty day. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, and national origin. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job Description BASIC FUNCTIONS Prepare all inbound and outbound shipments. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Prepares shipments using DHL, Fedex, UPS and courier pick ups., • Prepares bills of lading; checks items to be shipped against picking tickets to determine that quantities, destination, and routing are correct., • Receives and unloads incoming materials and compares information to receiving reports to verify priority for quality department., • Prepare incoming material in bins with the correct paperwork and tracker for inspection process., • Logs outbound shipments, • Inspects shipments for damages or defects; records discrepancies or damages and notifies supervisor and/or purchasing personnel., • Picks and packs orders for outbound shipments using picking tickets., • Check for special customer requirements for shipping., • Organize materials in shipping area., • Follow Daily 5S/ESD/FOD policies, • Be able to pack and ship Hazmat material, including Haz Shipper software., • Comply with all requirements of the environmental management system., • Ability to navigate and use customer required shipping portals., • Performs inventory and supply checks, • Ability to evaluate and differentiate between various commodity types., • · Adhere to Safety Manual requirements for employees STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • · Daily throughput of Incoming and Outgoing Shipments, • · Accuracy of PO’s received., • · Accuracy of packages picked/shipped, • · COD management, • · Hazmat Compliance, • Daily 5S/ESD/FOD policies non-conformances EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma, • 0-2 years of relevant experience in related field(s), • Ability to pay attention to great detail., • · Prior knowledge of shipping/receiving techniques.

Job Description BASIC FUNCTIONS The Operations Administrator contributes to the coordination of the Sales Department’s strategic and tactical plans. The Sales Operations Coordinator supports the Sales Operations Manager on special projects, Account Management administrative functions, processes, metrics, and training. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support special projects, such as improvement of delivery and quality metrics Support administrative activities with Sales so that Account Managers can focus on customer contacts. Examples include: help desk ticket management, sending general marketing information, entering contacts/leads, administrative documents, trackers, form completion, etc., • Perform activities as directed by Sales Operations Administrator related to Sales metrics, • Prepare, facilitate, and record training for all Sales personnel Including Sales training plans to onboard new Sales Assistants and Sales personnel., • Maintain Sales EPDS Manual., • Review and update policies and procedures for the Sales Dept., • Meet, coordinate, and support activities with other CTG Departments to ensure alignment on Sales and Operations objectives., • Monitor inbound PO’s and work with Sales to keep dates current/updated as needed., • Monitor RMA/RTV progress; work with sales employees to resolve all issues within the 30 day requirement., • Assess and measure effectiveness of processes, • Audit sales processes and work as needed, • Evaluate unforeseen/unplanned issues that arise with procedures and processes to determine the best course of action., • Maintain and update documents on the Sales team page on the Intranet., • Support the Sales department in OST meetings., • Support sales res during internal audits and when necessary during external audits., • Comply with all customer quality requirements., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • 0-3 years project management, supply chain and/or operations experience., • B.A. /B.S. from an accredited university desired, or equivalent experience; Masters preferred., • Defense and Aerospace experience preferred., • Experience with a QMS and process-driven environment., • Advanced knowledge of Microsoft Office Suite – specifically Outlook, Word, Excel and PowerPoint., • Benefits: Health insurance, Dental insurance, Vision insurance, Retirement plan, Paid time off, Flexible schedule, Parental leave, Professional development assistance., • Open door policy with executives., • Free catered lunch daily., • Annual corporate events. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description BASIC FUNCTIONS Provide support and assistance to assigned sales manager. Calls and/or receive calls from new or existing customer base. Answer questions about product, service, price, delivery, submittal status, availability of product, etc. Assesses customer needs and makes recommendations for products and services. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Assist Sales Manager in attaining sales performance goals., • Maintain customer database., • Assist Accounting with vendor invoice processing., • Follow up with customers, • Order tracking, • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Customer empathy/ Superior customer service skills., • Highly organized.

Job Description TITLE: QUALITY ADMINISTRATOR DEPARTMENT: COMPLIANCE REPORTS TO: QUALITY COMPLIANCE MANAGER FLSA STATUS: NON-EXEMPT JOB DESCRIPTION REVISION: 09/04/24 BASIC FUNCTIONS The Quality Administrator will provide support to the Quality Compliance team in maintaining a strong overall Quality Compliance Program including the Quality Management System and Supply Chain. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES GENERAL: • Produce detailed Excel, Word, and PowerPoint reports/presentations as needed by Department Leads., • Preparation of Quality Management Reviews, acquiring accurate data necessary to communicate the Quality Management System., • Evaluating QMR data and reporting back findings including but not limited to: trends, areas of concern, etc. to Department Leads., • Update management on open items related to projects., • Coordinate schedules, activities, meeting minutes and follow-up action items., • Provide support to External Provider Qualification program; identify risks and opportunities for improvement., • Provide support for updating all vendor files in EPDS as per approved Vendor Forms., • Assist Compliance team with functions related to document control., • Lead and/or conduct internal audits throughout the organization as directed by the Audit Program Manager in accordance with ISO19011, • Assist personnel with on-the-spot audits and process walk through as requested., • Member of the "Surveys Team", thus responsible for completion of Incoming Self-Assessments as directed by the Director of Contracts., • Training of personnel when requested by Management on any responsible processes., • Act as a backup administrator to the Compliance Regulatory Platform., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • Update maintain and grow tracker with any applicable incidents as directed, • May be assigned additional responsibilities as directed by the Quality Compliance Manager QMS TRAINING ADMINISTRATOR: • Input training requirements provided by the Management Representative for all QMS applicable job titles, • Ensure newly onboarded employees are meeting training requirements within the 90-day probationary period, • Ensure training of revised documents are completed within the two-week CTG requirement. Follow up with department heads as needed to ensure trainings are conducted, • Send Weekly Delinquent Training Report to department heads as applicable., • Follow up with department heads regularly to ensure trainings are conducted and training records are closed, • Upload and maintain employee certifications within the Compliance Regulatory Platform, • Monitor employee certification expiration dates and notify department heads accordingly, • Ensure operational employees’ vision exams are up-to-date and notify department heads accordingly STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001, ISO17025 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA- QMS-9090, ASA-100 and supporting construct standards AS6081, AS6171, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Weekly recertification rate to meet annual requirements for External Providers (as needed with Supply Chain designee), • Re-Certification rate average turn time., • Procurement (Sales) Weekly completion rates, • Sub-Tier assessments submitted for completion + return rates., • New Sub-Tiers added monthly., • Closures of all said projects within CTG’s Compliance Project Management tool, • Customer Surveys received and documented monthly EDUCATION / EXPERIENCE / COMPENTENCY • Bachelor’s degree, preferred., • 1-3 years of administrative experience., • Proficiency in MS Office with expertise in Microsoft Word, PowerPoint, Excel and Project Management Tools., • Detail oriented and comfortable working in a fast-paced office environment, • Exceptional communication skills. ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.