Trabajos laser en North Bergen, New Jersey - Page 3Crear alertas

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. The Opportunity Voyant Photonics is seeking a Senior Manufacturing Production Test Engineer to join our Manufacturing Operations team and lead component- through module-level, in-line and End-of-Line (EOL) production test systems at contract manufacturers (CMs). This role partners closely with the Electrical Engineering, Mechanical, Systems, Photonics, and SW/FW teams, as well as contract manufacturers (CMs), to translate bench- and lab-level validation methods into robust, production-ready tests and fully high-throughput test systems spanning wafer, die, subassembly, and final module stages. You will own the deployment, validation, and continuous improvement of in-line test processes, ensuring consistent yield, reliability, and data integrity across all manufacturing stages. Key Responsibilities * Partner with Electrical, and Module Test Engineering teams to translate lab-level methods into robust, repeatable CM production tests * Own the deployment, validation, and sustainment of in-line test systems spanning wafer, die, laser, subassembly, and final module stages * Lead test industrialization for photonics, lasers, PCBAs, and amplifiers with foundries, OSATs, and CMs, including ATE, probe card, and optical alignment validation * Define test coverage, acceptance criteria, and yield targets for all production phases * Drive CM collaboration on test fixture design, equipment qualification, calibration, and maintenance to ensure repeatability and uptime * Implement automated test scripts, calibration routines, and data pipelines for traceability and real-time yield monitoring * Apply SPC, Cp/Cpk, DOE, and root cause analysis to improve process capability and test stability * Manage CM test audits, cross-site correlation, and calibration reviews to maintain consistency across factories * Qualify new CMs and test vendors in partnership with Supply Chain and Quality * Serve as primary escalation point for production test issues and lead cross-functional resolution * Travel up to 30% for test bring-up, validation, and continuous improvement Qualifications * Bachelor’s or Master’s in Electrical, Manufacturing, or Systems Engineering (or related field). * 7+ years of experience in manufacturing/production test engineering for semiconductor, photonic, lasers, or sensor-based systems. * Proven experience transferring engineering test processes into high-throughput, in-line production test systems. * Hands-on experience with wafer/die-level test, optics, amplifiers, PCBA (ATE, probe cards, parametrics, optical alignment) and module-level system testing. * Proficiency in Python or LabVIEW for test automation, data collection, and analysis. * Strong understanding of analog/mixed-signal test, signal integrity, and noise reduction. * Experience with SPC, DOE, root cause analysis, and yield improvement. * Strong CM management skills with the ability to influence test execution, throughput, and quality. Preferred Qualifications * Background in silicon photonics, FMCW LiDAR, or precision analog front ends. * Familiarity with in-line optical/electrical test for wafer-level packaging and photonic integration. * Experience scaling test operations across multiple CMs from NPI to volume production. * Knowledge of MES, manufacturing analytics, and automated factory data systems Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Team events and company meetups * Hybrid or remote work environment with monthly travel for remote employees. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionWe're looking for a registered dental hygienist to join our growing team! You’ll complete initial patient screenings, conduct dental cleanings, and assist dentists with examinations and procedures. Job seekers should have incredible customer service skills and a passion for providing excellent dental services. If you love helping people and want to work alongside a group of experienced dental professionals, start your application today!Compensation: $125,000 yearly Responsibilities: • Clean dental instruments to ensure everything is sterilized properly, • Remove plaque and apply fluoride or other sealants to prevent cavities and tooth decay, • Make patients feel at ease and taken care of before, during, and after the appointment, • Conduct initial screenings for patients to understand their oral health history, • Give guidance to patients about how to have good dental care at home after undergoing an operation or procedure, • Conduct comprehensive dental cleanings to ensure patients leave with a bright, healthy smile and apply Fluoride and/or Sealants when needed., • Perform initial patient screenings and gather detailed dental health histories., • Collaborate with dentists during examinations and procedures to provide seamless patient care., • Educate patients on oral hygiene best practices to empower them in maintaining their dental health., • Maintain accurate and up-to-date patient records to ensure continuity of care., • Monitor and restock dental supplies to keep our practice running smoothly and efficiently., • Able to stand up for long periods of time to administer dental exams and procedures, • Clear understanding and commitment to following HIPAA regulations and all safety guidelines, • Has dental hygienist licensure in the state where the job is located, • Must have at least an associate’s degree in dental hygiene; bachelor’s degree preferred Soul Dental is a contemporary, energetic, and growing company co-founded by two female friends. Our mission is to consistently provide exceptional customer service with high-quality dental care that is affordable for the majority of the public with PPO Insurance. We provide multi-specialty services so that it is convenient for our patients and offers a wonderful learning opportunity for our Doctors. With music playing in the background and cozy decor, with the latest technology like an Itero scanner, CBCT, Biolase Laser, and much more, Soul Dental is truly a wonderful team environment where everyone can learn and grow.

Job Description Perform a variety of duties in the Rehabilitation Therapy Unit and perform rehabilitation treatments • 100% paid costs to obtain specialized training in canine rehabilitation via Canine Rehabilitation Institute. This is equivalent to >$10,000!!! You will become a Certified Canine Rehabilitation Veterinary Technician (CCRVT) and retain this certification for your lifetime career., • Paid time off for required training, • Hands-on learning in a collaborative, compassionate environment, • A role where you truly make a difference in animal mobility and recovery🩺 What we ask:, • Be a full-time LVT in AMC's Rehab department, • Commit to 2 years post-certification caninerehabinstitute.com Qualifications • NYS Veterinary Technician's license (or permit), • Ability to handle and restrain all species of animal, • Must be able to lift 50 pounds, • Must be able to bend or kneel for extended periods of time while helping with patient restraint, • Must be able to work successfully as part of a team, • Ability to work independently and proactively, • Follow detailed directions and established protocols, • Electronic medical record experience preferred, • Must have flexibility necessary to work weekends, holidays and additional hours as needed, • CCRP (Certified Canine Rehabilitation Practitioner) CCRVT (Certified Canine Rehabilitation Veterinary Technician) or CCRA (Certified Canine Rehabilitation assistant) is preferred but not required Responsibilities, • Rehabilitation treatments including exercising, massage, hot/cold packing, tub/treadmill treatments, ultrasound, hot/cold therapy, laser treatments and acupuncture, • Assess patients on discharge, • Communicate professionally with clients and referral veterinarians regarding the patient's rehabilitation progress, • Maintain concise and accurate records of the patient's treatment progress and charges, • Assist in planning, performing and tailoring rehabilitation treatments according to patient's needs, • Maintain the cleanliness of Rehabilitation Department, • Order and stock supplies as necessary, • All other related duties as assigned Our comprehensive benefits package includes:, • Competitive salary, • Generous sign-on bonus, • Generous paid time off, • Tuition assistance, • 50% discount on veterinary care, • Mentorship through the VTS process, • Continuing education funds with rollover options, • NYS Licensing fee reimbursement, • Relocation reimbursement for qualified candidates who live outside the NYC metropolitan area, • 403b matching, • Comprehensive medical, dental, and vision coverage A Commitment to Lifelong Learning: Founded in 1910, the Schwarzman Animal Medical Center is the world's largest veterinary teaching hospital, offering compassionate, collaborative, and cutting-edge veterinary care. Our commitment to innovation has led to the creation of one of the most advanced veterinary facilities in the world. State-of-the-Art Facilities: AMC just completed a major expansion and renovation. This project transformed the hospital's entire 83,000-square-foot space into a state-of-the-art facility unlike any other. Highlights include: A brand-new full floor surgical center, 1.5 Tesla Philips MRI (the exclusive high field MRI for small animals in NYC), 64-slice spiral CT scanner, Electroencephalography (EEG), Elekta Versa HD Linear Accelerator, In-house Laboratory, Ultrasound, Echocardiogram, and Mobile Cone Beam CT A multidisciplinary team of 140+ veterinarians across 20+ specialties: With over 20 specialties and services under one roof, our departments frequently work together to deliver the highest quality of patient care in the veterinary field. Our dynamic array of specialists means that we are the go-to place for complex cases. A Hospital in the heart of NYC: AMC is located in Manhattan, surrounded by leading research and teaching institutions such as Cornell University College of Veterinary Medicine, Weill Cornell Medical School, and NYU. Collaborative research opportunities abound, and our strong focus on education ensures a rewarding career for those passionate about mentoring and advancing veterinary medicine.

Job DescriptionRetail Ambassador - Part-Time New York City, NY - Nolita At Rothy’s, we believe there’s a better way to do business—one that puts the planet and its people first. That’s why we’ve transformed millions of plastic bottles into stylish, sustainable shoes and bags, creating wardrobe staples that look just as good as they feel. In our retail stores, clienteling, and genuine connection are at the heart of everything we do. We take pride in building lasting relationships with our customers—getting to know their style, anticipating their needs, and creating personalized experiences that make them feel truly seen and supported. Whether it’s helping someone find their perfect fit or sharing the story behind our sustainable designs, every interaction is an opportunity to deepen that connection. As we grow, we’re cultivating not just a workplace, but a community. It’s a place where careers can grow, ideas are shared, and people feel a true sense of belonging. Every day brings new opportunities to learn, lead, and make an impact—together, as part of a welcoming, inclusive team that celebrates each other’s contributions. About the team: Shopping at Rothy’s IRL is not your ordinary retail experience—so naturally, our Stores team is extraordinary, too. Experts in the fit, wear and sizing of our shoes, these team members provide deep knowledge of every Rothy’s style and out-of-this-world customer service—creating long-lasting brand loyalty. Customers love shopping in our stores due to these exceptional interactions. About the role: As a Retail Ambassador, you will be the representative of the brand on the sales floor, delivering exceptional customer experiences and living our company values in every interaction. You’ll focus on creating meaningful connections with customers, driving sales through service, and supporting a welcoming, inclusive store culture. While your primary focus is on sales, you will also assist with limited operational tasks to ensure the store is well-maintained and running smoothly. What you’ll do: Customer Experience (90%) * Deliver the Rothy’s Experience to every customer—a best in class service experience rooted in Rothy’s values—consistently embodying the brand through presentation, communication, and product expertise * Drive personal sales and results and contribute to team goals * Create lasting relationships with our customers by engaging in strong clienteling practices * Contribute to a positive, inclusive, and service driven store culture by modeling collaborative, team focused behavior Operational Excellence (10%) * Execute assigned responsibilities accurately as part of daily store operations, including stock replenishment, visual merchandising support, and store organization and cleanliness * Demonstrate knowledge of store operations and policies, following established procedures and SOPs to ensure operational excellence and compliance You are: * Guided by Rothy’s values and committed to fostering a welcoming, service driven environment: * Embrace Possibility. We dream BIG, really big * Obsess Over Innovation: We never accept the status quo * Make the Planet Proud. We make the right choice, not the easy one * Collaboration is Key. We’re laser focused on driving results * 18 years of age or older You have: * Previous retail or customer service experience preferred * Strong communication skills and the ability to build genuine customer connections * A passion for service and the drive to achieve personal and team sales goals * Willingness to support operational tasks as part of the team * Availability to work at least 16 hours/week, either 3 Peak Days (Friday, Saturdays, Sundays + Holidays) OR 2 Peak Days (Friday, Saturdays, Sundays + Holidays) + 2 Non-Peak Days (Mondays - Thursdays) * Ability to stand/walk an entire shift * Ability to lift, push carry or otherwise move up to 25 lbs * Ability to frequently bending, reaching, stretching, and safely use ladders and step stools * Ability to uphold Rothy’s Experience by following our dress code, including wearing Rothy’s shoes during every shift Pay Range $18.00 - $19.00 per hour Base pay is one part of the total rewards package that is provided to compensate and recognize employees for their work. This role may be eligible for additional discretionary bonuses/incentives, as well as a comprehensive benefits package. Base pay will vary based on factors such as qualifications, experience, skill level, competencies and work location. We will meet minimum wage or minimum of the pay range (whichever is higher) based on city, county and state requirements. Please see our Privacy Policy here

Job DescriptionRetail Ambassador - Part-Time Brooklyn, NY - Williamsburg At Rothy’s, we believe there’s a better way to do business—one that puts the planet and its people first. That’s why we’ve transformed millions of plastic bottles into stylish, sustainable shoes and bags, creating wardrobe staples that look just as good as they feel. In our retail stores, clienteling, and genuine connection are at the heart of everything we do. We take pride in building lasting relationships with our customers—getting to know their style, anticipating their needs, and creating personalized experiences that make them feel truly seen and supported. Whether it’s helping someone find their perfect fit or sharing the story behind our sustainable designs, every interaction is an opportunity to deepen that connection. As we grow, we’re cultivating not just a workplace, but a community. It’s a place where careers can grow, ideas are shared, and people feel a true sense of belonging. Every day brings new opportunities to learn, lead, and make an impact—together, as part of a welcoming, inclusive team that celebrates each other’s contributions. About the team: Shopping at Rothy’s IRL is not your ordinary retail experience—so naturally, our Stores team is extraordinary, too. Experts in the fit, wear and sizing of our shoes, these team members provide deep knowledge of every Rothy’s style and out-of-this-world customer service—creating long-lasting brand loyalty. Customers love shopping in our stores due to these exceptional interactions. About the role: As a Retail Ambassador, you will be the representative of the brand on the sales floor, delivering exceptional customer experiences and living our company values in every interaction. You’ll focus on creating meaningful connections with customers, driving sales through service, and supporting a welcoming, inclusive store culture. While your primary focus is on sales, you will also assist with limited operational tasks to ensure the store is well-maintained and running smoothly. What you’ll do: Customer Experience (90%) * Deliver the Rothy’s Experience to every customer—a best in class service experience rooted in Rothy’s values—consistently embodying the brand through presentation, communication, and product expertise * Drive personal sales and results and contribute to team goals * Create lasting relationships with our customers by engaging in strong clienteling practices * Contribute to a positive, inclusive, and service driven store culture by modeling collaborative, team focused behavior Operational Excellence (10%) * Execute assigned responsibilities accurately as part of daily store operations, including stock replenishment, visual merchandising support, and store organization and cleanliness * Demonstrate knowledge of store operations and policies, following established procedures and SOPs to ensure operational excellence and compliance You are: * Guided by Rothy’s values and committed to fostering a welcoming, service driven environment: * Embrace Possibility. We dream BIG, really big * Obsess Over Innovation: We never accept the status quo * Make the Planet Proud. We make the right choice, not the easy one * Collaboration is Key. We’re laser focused on driving results * 18 years of age or older You have: * Previous retail or customer service experience preferred * Strong communication skills and the ability to build genuine customer connections * A passion for service and the drive to achieve personal and team sales goals * Willingness to support operational tasks as part of the team * Availability to work at least 16 hours/week, either 3 Peak Days (Friday, Saturdays, Sundays + Holidays) OR 2 Peak Days (Friday, Saturdays, Sundays + Holidays) + 2 Non-Peak Days (Mondays - Thursdays) * Ability to stand/walk an entire shift * Ability to lift, push carry or otherwise move up to 25 lbs * Ability to frequently bending, reaching, stretching, and safely use ladders and step stools * Ability to uphold Rothy’s Experience by following our dress code, including wearing Rothy’s shoes during every shift Our benefits: * Wellness and Commuter Programs * PTO and Wellbeing Time * Employee Discount Program Pay Range: $18.00 - $19.00 per hour Base pay is one part of the total rewards package that is provided to compensate and recognize employees for their work. This role may be eligible for additional discretionary bonuses/incentives, as well as a comprehensive benefits package. Base pay will vary based on factors such as qualifications, experience, skill level, competencies and work location. We will meet minimum wage or minimum of the pay range (whichever is higher) based on city, county and state requirements. Please see our Privacy Policy here

Job Description Role: Sales Business Development - Part Time, Project Based, Flexible Hours - Remote Internal Title: Door Opener Job Type: Flexible Hours, 100% Remote, Project Based, Part-Time Description: We are one of the best sales teams in the country providing a service that is critical to the growth, profit, and success of most businesses. Known as Door Openers, our main focus is booking meetings with the right prospects. We laser focus on securing the best prospect meetings for our clients. The right candidates enjoy the thrill of booking meetings and have at least 10 years of experience making outbound calls booking meetings with new prospects. Potential to earn full-time pay while working remotely, part-time/flexible hours. As a sales unicorn, you succeed at booking meetings with senior-level executives across any industry. As long as KPIs are met, you have the freedom to make your own schedule with vacation. You Should Apply: If you are a senior-level, enterprise sales executive who is looking for a remote and flexible schedule. You have a high track record of consistently achieving new business goals. Are a self-starter, very organized, and comfortable with daily use of CRM. Required skills and experience: • 10+ years' experience securing meetings with new executive-level prospects (C-level, SVP, VP, Director), • Strong ability to engage prospects and their assistants in dialogue, quickly build rapport, actively listen and maneuver conversations to achieve the maximum number of meetings possible, • Self-motivated, disciplined, methodical, superior attention to detail, • Advanced computer proficiency with CRM, MS-Office, file sharing, and Zoom, • Secure and schedule initial meetings with high-level decisions makers on behalf of our clients, • Articulate the value proposition with a prospect by phone, voicemail, and/or email to maximize the number of meetings, • Maintain daily CRM activity data and utilize CRM reports to strategize activity level for best results, • Ability to learn, understand and communicate complex information gained to prepare clients for prospect meetings, • Confirm meetings, write meeting reports and bi-weekly reviews, track performance and report to clients and management, • Attend internal and external meetings via videoconferencing, • Work with prospecting and research tools and with our research department on the refining prospect list, • Provide clients, prospects, and team members (at all levels) with superior support, service, and respect, • Salesforce aptitude test and Role Play are required in our interview process., • Must have access to a reliable full operating PC or Mac and stable Wifi The Door Opener® Service has helped thousands of business leaders and salespeople secure initial meetings with executive-level decision-makers, opening new doors to large sales, in medium size as well as Fortune 500 companies. During a period of time when gaining new customers has become almost impossible, Kopp has developed a business model that helps clients fill their pipelines and achieve the growth their competitors only dream about. Kopp Consulting has been on the Inc. 5000 list of fastest-growing U.S. companies for two consecutive years and won the Stevie award for Sales Outsourcing Provider of the Year.

Job DescriptionOur Mission: Hospital-Quality Care, Everywhere. The healthcare industry still relies on faxes and phone tag to coordinate critical care for patients at home. We think patients and the clinicians who serve them deserve better than a system stuck in 1995. Verse Medical is building the modern software infrastructure to make it happen. We're a well-funded Series C company (backed by General Catalyst, SignalFire, and Sapphire Ventures) on a mission to heal a fragmented system. Our platform connects the dots between providers, payors, and patients, ensuring people get the high-quality care they need, reliably and right where they live. We’re growing fast and looking for people who are driven by this mission to join us! Our Values: The Principles That Guide Us Our values are the operating system for how we work together and with our partners. They aren't just words on a wall; they are the principles we bring to every decision, every day. * We are transparent, upfront and direct. We operate with honesty and clarity. We share information openly, the good and the bad, and believe that direct, respectful feedback is the foundation of trust and progress. * We value speed of iteration. We are building something new, which means we learn by doing. We prioritize rapid iteration and getting solutions into the hands of users, believing that progress is more valuable than perfection. * We give 110% effort, 30% of the time. We are passionate about our mission, and there are moments that require us to go the extra mile. We believe in focused intensity when it counts, balanced by a sustainable pace that keeps our team energized for the long run. * We empathize with customers to a fault. When our users face a problem, we own it. Instead of asking them to change, we ask ourselves, "How can we make this better?" We believe true innovation comes from deep empathy and a relentless focus on solving the real-world challenges of healthcare. Your Impact: How You'll Help Us Heal a Broken System This is a rare opportunity to join in a generalist Strategy & Operations role within the Office of the CEO team. You’ll be a key part of the team and help set our direction, execute and scale our most critical initiatives. You’ll report to the Chief of Staff and work closely with our CEO and many other functional leaders within the company across Partnerships, Sales, Customer Success, Operations, and Product. We’re hiring a highly analytical and detail-oriented S&O associate to partner closely with our Chief of Staff and CEO in driving the company’s most critical initiatives and ensuring operational excellence. This role is pivotal in ensuring our leadership team is laser-focused on high-impact priorities and that the organization runs smoothly and efficiently. You will have a bird’s-eye view of the entire company, serving as a key advisor, operational executor, and problem-solver for the Office of the CEO team. What You'll Achieve: A Glimpse into Your Contributions Key Responsibility - Operational Support: * Summarize & prepare materials for various leadership meetings, reviewing closely with the founder. * Track progress on major company projects and initiatives, ensuring deadlines are met and blockers are addressed. * Maintain a system for escalating brewing issues to leadership promptly. * Maintain our office management function, including running all office operations. Key Responsibility - Analytical and Reporting: * Conduct fact-finding investigations in specific areas and prepare comprehensive reports & recommendations. * Dive into analytics and reporting to uncover insights and make recommendations for improvement. Key Responsibility - Process and Organization: * Drive operational improvements across the company, ensuring processes are effective and scalable. * Manage follow-up on deadlines and commitments with internal teams to ensure accountability. Eventual Responsibilities: * Serve as the Office of the CEO team’s "audit" function, providing an objective view of organizational health and execution. * Run operational aspects of the leadership function, taking on tasks and projects end-to-end as needed. Note: We’re looking for a true Swiss Army Knife. This role comes with great responsibility - we absolutely love what we do here at Verse and have a healthy culture, but you can expect this role and our expectations to be fairly rigorous. What You'll Bring: The Skills and Experience You’ll Leverage We believe that diverse experiences and backgrounds lead to better solutions. While we have an idea of what will help someone succeed in this role, we are open to being convinced by your unique story and skills. If you believe you can achieve the outcomes above, we encourage you to apply. Core Skills & Experience * 4+ years of experience in technology, consulting, finance, strategy, operations or otherwise rigorous roles. * To be effective in this role, it's critical to be immersed in all aspects of the business, working very closely with the Office of the CEO team. As a result, this role will regularly require 55-60 hours a week, with weekend (primarily Sunday) work as necessary. * Equal strength in quantitative and interpersonal/communication skills * Ability to “fail fast and learn fast”, iterate strategy based on market signals * Exceptional organizational skills with a process-driven mindset. Your work will be trusted without double-checking, so consistently defect-free work is critical. * Ability to thrive in highly ambiguous environments, handle projects with evolving requirements, and define the path for others * Comfort working one-on-one with executive level stakeholders within Verse and externally The Rewards & Reality: Compensation, Benefits & Logistics We believe in taking care of our team, both professionally and personally. Here’s what we offer: * Meaningful Compensation: $160,000-$190,000 base salary + equity * Comprehensive Health & Wellness: We cover 100% of your health insurance premium and provide access to high-quality dental and vision insurance plans for you and your dependents. * Plan for the Future: We offer a 401(k) plan to help you save for your future. At this time, the company does not offer a 401(k) match. * Career Growth: You'll have opportunities for rapid career advancement in a company that's at a major inflection point. We want you to grow with us. Work Environment & Location: This role is based in our New York office. For this role there is a requirement of 5 days per week in the office with a few hours of regular weekend work. Hours expectations are 55-60 hours per week on a regular basis. Our Pledge for an Equitable Future At Verse Medical, our mission is to deliver equitable, hospital-quality care to everyone, regardless of their background or where they live. We can only achieve this if our own team reflects the diversity of the patients we serve. We are committed to building a workplace where everyone feels a sense of belonging, where their contributions are valued, and where they can do their best work. We embrace diversity of all kinds: race, gender, age, religion, identity, experience. We are actively working to build a more inclusive and equitable world, starting from within our own walls. We are an equal opportunity employer. We are also committed to providing a positive and accessible interview experience. If you require any accommodations to participate in our process, please contact us at . Compensation Range: $160K - $190K

Job Description Start strong, stay strong! Join our winning team and receive our Stay and Thrive Bonus. A career that changes lives. SightMD is a rapidly growing integrated ophthalmic provider group, extending the reach of exceptional eye care to patients across New York, New Jersey, Pennsylvania, Connecticut, and Massachusetts. With over 127 eye care providers and the convenience of 60 locations, our commitment to delivering unparalleled services is at the heart of everything we do. As we embark on our mission, we are actively seeking teammates who are eager to contribute to our legacy of eye excellence, a tradition that spans more than 50 years. Position Summary: As an Ophthalmic Technician, you will play a vital role as an assistant to our physicians. You will be cross trained to perform a range of administrative and clinical duties. These duties include preparing the patient to see the physician, preparing examination rooms, performing basic and routine vision screening examinations, administering eye medications, cleaning, and maintaining ophthalmic instruments and assisting physicians during minor surgical and laser procedures. Job Duties & Essential Functions: Patient Interaction & Clinical Intake • Greet and communicate with patients and their families in a manner consistent with caring and respect., • Initiate patient evaluations by accurately documenting the chief complaint, history of present illness, review of systems, and all pertinent information., • Perform pre-exam testing, including visual acuity assessment (with pinhole and glare testing), confrontational visual fields, extraocular muscle testing, pupillary evaluation, tonometry, angle assessment, and dilation., • Conduct advanced diagnostic testing such as OCT, fundus photography, IOL Master, Pentacam, A-scan, B-scan, Wave Scan/Vario, keratometry, lensometry, and visual field testing., • Assist with in-office minor surgical procedures and laser treatments., • Complete prescription refill requests as authorized by the physician, ensuring proper documentation in the patient chart., • Track, document, and communicate laboratory results to physicians and patients promptly, ensuring accuracy and continuity of care., • Educate patients on the use of medications and provide pre- and post-operative instructions as directed by the physician., • Maintain and manage inventory of ophthalmic supplies, pharmaceuticals, and instruments., • Inspect and assist with the maintenance of clinical examination equipment, report damage, coordinate repairs, and request replacements as necessary., • Assist with cleaning surgical instruments in preparation for sterilization., • Properly shut down and clean diagnostic testing equipment as needed., • Open and close exam rooms daily, including cleaning equipment, charging devices, and securing instruments., • Assist with opening and closing the clinic as needed., • Follow all safety protocols and clinic procedures., • Monitor and respond to work emails; utilize shared tools such as Google Drive to stay informed throughout the workday., • Participate in training and educational opportunities, including webinars and in-service sessions, to remain current with best practices., • Perform additional duties as assigned or directed by the supervisor. Required Qualifications: • High School diploma or equivalent, • Minimum of one (1) year of experience as an Ophthalmic Technician, • Certified Ophthalmic Assistant (COA) certification required or enrolled within one year and completion within two years of hire, • Strong customer service skills with a professional and friendly demeanor., • Excellent organizational, time management, and multitasking abilities., • Skilled in problem-solving with strong attention to detail., • Comfortable engaging in face-to-face interactions with patients and staff., • Ability to stand for long periods of time Work Schedule: • $24.50 Benefits: We aim to take care of our teammates the same way we take care of our patients. All SightMD employees receive the following benefits: • Medical/Dental/Vision Insurance, • Prescription Drug Coverage, • Company Paid Term Life Insurance & Long-Term Disability, • Supplemental Insurance Benefits, • Employee Assistance Program (EAP), • Retirement Plan - 401(k), • Paid Time Off (PTO), • Paid Holidays, • Career Development Programs, • All benefits are subject to eligibility requirements. Equal Employment Opportunity Statement: SightMD is an equal opportunity employer and does not discriminate on the basis of race, color, national origin, religion, creed, age, disability, sex, gender identity or expression, sexual orientation, familial status, pregnancy, predisposing genetic characteristics, military status, domestic violence victim status, criminal conviction, and all other protected classes under federal, state and local laws. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact People Services at peopleservices@sightgrowthpartners. #SMD123

Job Description ABOUT US Benzel-Busch Family of Dealerships is reputable and dedicated to delivering our valued customers the highest standards of service and quality. With a rich heritage in the automotive industry, our esteemed family of dealerships is comprised of Mercedes-Benz of Orange County, Benzel-Busch Mercedes and Genesis of Englewood. Our journey began with a commitment to delivering the pinnacle of automotive excellence. Over the years, we have earned a reputation for offering exceptional vehicles that embody sophistication, performance, and innovation. With Mercedes-Benz and Genesis franchise, we have set the industry's standard for luxury and engineering. We are excited to offer our customers the opportunity to experience the future of mobility with a brand that redefines what it means to drive in style and comfort. JOB OVERVIEW Blacksmith Automotive Management Co. is an automotive management company operating three dealerships. Benzel-Busch Motor Car Corporation – Mercedes – Englewood NJ Genesis of Englewood – Englewood NJ Mercedes Benz of Orange County – Harriman NY Blacksmith Automotive Management is seeking an Accounts Payable Analyst to join our team. As an Accounts Payable Analyst at Blacksmith Automotive Management, you will support all aspects of accounts payable processing for all three dealerships, and become a valued contact for our vendors, management team, and employees. This position works in the office at our primary location in Englewood, NJ. Core Responsibilities: • Review and process a high volume of vendor invoices and payments for multiple locations., • Perform day-to-day processing of accounts payable transactions to ensure finances are up-to-date and accurate., • Disburse on demand checks as requested, as well as make monthly vendor payments via company laser checks and ACH debit payments., • Review, reconcile and pay credit card statements., • Research and respond to vendor and internal inquiries., • Research and resolve invoice discrepancies., • Perform statement reconciliations., • Assist in month end and year end closings., • Ability to balance accuracy and efficiency with a sense for urgency., • Organized with attention to detail., • Technically knowledgeable and analytical., • 1 to 5 years of experience in accounts payable., • Associates Degree or higher is strongly recommended., • Experience with spreadsheets and account reconciliation., • Extensive working knowledge of Microsoft Excel, Word and Outlook., • Industry leading compensation plan, • Unlimited growth potential. Excellent Advancement Opportunities!, • Comprehensive training programs to advance your career, • Supplemental Life Insurance and Long-Term Disability, • 401K Retirement Plan with Employer Contributions, • Employee discounts for you and your family!, • Medical and Dental Insurance available Benzel-Busch is committed to fostering an inclusive environment that appreciates and leverages the diversity of our team. We provide equal employment opportunity (EEO) to all qualified applicants and employees without regard to race, color, ethnicity, gender, age, national origin, religion, marital status, veteran status, physical or other disability, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job Description The BusRight Vision We believe public education creates freedom, and that access to that education starts with a safe and reliable ride to school. That’s why we built BusRight, a modern transportation platform trusted by hundreds of thousands of Transportation Directors, drivers, and parents across the country to make school transportation safer, smarter, and more equitable. We recently announced a $30M fundraise and are excited to continue to invest in new innovative solutions to power our country’s largest mass transit system - school buses. Purpose The VP of Marketing exists with a laser-focused commercial objective: to create marketing qualified leads that result in closed won revenue. Reporting directly to our CEO and working closely with teams across the Commercial organization, the VP of Marketing will be responsible for developing and executing a strategy that generates demand, improves conversion, and delivers messaging, campaigns, and programs that move prospects through the sales funnel. We’re utilizing proven Marketing tactics that we know to be working - including attending in-person events, producing online webinars, and conducting email marketing campaigns. We’re ready to go a step further by harmonizing and optimizing these initiatives within a scalable, strategic marketing plan that will support delivery of consistent 100% YoY growth. As our first VP of Marketing, you’ll be responsible for answering 5 core questions regarding key revenue-driving initiatives: • Demand gen channels and initiatives. What mix of channels and tactics (webinars, website, PR, print, digital, and “off the beaten path” ideas) should we invest in to generate demand most efficiently?, • In‑person events strategy. How should we design, execute, and measure a scalable in‑person events strategy across vast territories?, • Programming and collateral for pipeline growth. What content, social proof points, and referral incentives do we need to create to generate more marketing qualified opportunities and accelerate the sales cycle?, • Data and GTM intelligence. How should we derive actionable insights from our outreach and CRM data, and create strong marketing–sales alignment to reliably support our “hub‑and‑spoke” GTM model? About You • You’ve spent 8-12 years in progressive Marketing roles within high-growth, venture-backed organizations (preferably Series A-C)., • You know how to sell into a well-defined, close-knit market where word of mouth and social proof matter most. (Bonus points if you’ve sold into the K-12 education space.), • You have experience marketing innovative solutions to audiences with varying degrees of “tech savviness.”, • You know how to scale an in-person event marketing strategy into a well-oiled, revenue generating machine., • You’re a demand gen nerd at your core, but you’ll also geek out on brand building, GEO/SEO, opportunity lifecycle management, and vibe-coding new tools., • You would rate your written communication skills an 11 out of 10. (The author of this job description is actively seeking a run for their money.), • You love to roll up your sleeves and get your hands dirty, whether that’s writing the first email cadence for a new product or authoring new organizational design proposals for your department. No problem is too big or small., • You take a hands-on approach to leadership and know how to thoughtfully engage with your direct reports and cross-functional partners to actively drive successful outcomes through others., • You’re based in New York or Boston and are excited to work out of our offices with your teammates 1-2 days per week., • Most of all, you’re humble, curious, and down to earth. You care about people, education, and building something that matters. This is a chance to join a fast growing technology company early and make your mark on a territory and a team that’s transitioning how millions of students access their education every day. If you're energized by growth and driven by relationships we’d love to hear from you. We’re a remote team with hubs in New York City, Boston, Austin, and Poland. To get a feel for the team and culture, check out our company retreat in Mexico, this BusRight commercial, and how we approach school bus conferences.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Group is seeking an experienced Senior Scheduler to support complex transportation, infrastructure, and public building programs for public-sector clients. This role is critical to the successful planning, execution, and monitoring of large-scale capital projects and requires deep expertise in CPM scheduling, public agency processes, and multi-stakeholder coordination. The ideal candidate brings a strong background working on DOT, transit authority, municipal, or other government-funded projects and is comfortable operating in fast-paced, highly regulated environments. Responsibilities • Conduct Critical Path Method (“CPM”) Schedule Management to support our client's capital program and handle design, construction, and design build CPM schedules., • Attend project kick-off meetings and discuss the schedule submissions and the CPM scheduling requirements., • Prepare detailed CPM review comments of baseline schedules and recommendations, discuss with client project management teams, and issue review report of the baseline schedules., • Facilitate planning sessions with project management teams, project team members, and multiple project stakeholders (e.g., agency owners, user departments, contractors) to identify work packages and tasks as well as execution logic., • Create and maintain project and program schedules during all phases of capital projects., • Complete summary and detailed reviews of baseline schedules, activity durations, logic ties, sequence of construction and phasing, resources and resource histograms, costs and cost curves and run schedule workshops., • Review monthly CPM Updates and provide the following reports:, • Primavera schedule comparison reports including recommendations for improvement for schedule logic, duration changes and general schedule quality., • Critical Path (Longest Path) and Float Path analysis of the monthly schedule updates., • Reviews of the monthly schedule updates, highlight changes in logic ties, activity duration, calendars, any deviation in sequence of construction from the baseline schedule, added/deleted activities and provide comments, recommendations and schedule review reports., • Earned Value (“EV”) reports based on EV analysis., • Monthly Time Delay reports, identifying the root cause of delays, and responsible parties, with recommendations for improvement., • Attend design, construction, project progress and schedule meetings., • Conduct periodic field visits for ongoing construction projects., • Review Change Orders Frag-net schedules, perform delay claim and Time Impact Analysis, identify the root cause of the delay, the party responsible and provide recommendations., • Create hypothetical scenario schedules to recommend and review recovery and mitigation schedules., • Develop and provide a monthly update of Project Management Schedules, which capture the project delivery lifecycle with project team input., • Assist in developing ad-hoc schedules and reports for in-house capital program projects., • Offer risk analysis in collaboration with project teams and stakeholders to assess schedule risks and mitigation options., • Bachelor’s degree in engineering, architecture, transportation, construction or project management., • A minimum of ten (10) years of related experience including a minimum of five (5) years in management, supervisory role, or project manager role in a large, multi-faceted organization., • Proficient in Oracle-Primavera P6 Cloud and MS Project., • Strong technical, analytical and problem-solving skills., • Demonstrated knowledge of project scheduling and CPM techniques., • Demonstrated knowledge of construction methods and standards., • Demonstrated knowledge of basic civil, structural, mechanical and electrical engineering principles., • Strong oral and written communication skills are required., • Strong interpersonal skills., • Strong project management and coordination skills with adherence to scope budget and schedule., • Proficient with the Microsoft Suite of products such as Excel, Access, Word, PowerPoint, and Outlook., • Experience with the design and construction in a railroad environment is preferred but not required., • Knowledge of Power BI is preferred but not required., • Project Management Institute (“PMI”) Scheduling Professional (“PMI-SP”), and Project Management Professional (“PMP”) certifications are preferred but not required., • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is seeking Third Shift Laser Cutting Operators for our Kearny, NJ facility. This is a fast-paced role within a sheet metal manufacturing environment. The Laser Operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and precision measurement instruments. Third Shift Schedule: Monday-Friday, 11:00 p.m.-7:30 a.m. Includes an additional shift differential Primary Job Responsibilities: \n • Program, set up, and operate CNC lasers-preferably AMADA systems\n, • Collaborate with production leads to meet demand and stay on schedule\n, • Inspect parts to ensure they meet quality standards and are free of defects\n, • Perform routine maintenance on machinery\n, • Maintain a clean and safe work area\n, • Partner with Quality, Environmental, and H&S teams to ensure compliance with all operational and regulatory requirements\n, • Minimum of 2 years' experience in laser programming and setup, preferably with AMADA equipment or similar sheet metal CNC systems\n, • Ability to read and interpret 2D prints, 3D models, and work instructions\n, • Knowledge of sheet metal processes, nitrogen usage, and feed rates\n, • Proficiency with basic measurement instruments to verify component accuracy\n, • Strong verbal communication skills\n, • Excellent time management\n, • Ability to lift up to 50 lbs., and to stand, bend, and move frequently throughout the shift\n, • Experience in sheet metal fabrication\n, • Understanding of laser machine capabilities and limitations, including cut settings\n, • Experience with NC coding, including making edits based on job requirements\n UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. \n • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire\n, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment\n, • Sick Time - will begin accruing from day one\n, • Mandatory Union Dues - $7/week, $28/month\n, • Mandatory One-Time $182 Union Application Fee\n Drug-free workplace.

Job Description Area Sales Manager Summary The Area Sales Manager is responsible for generating revenue and executing our sales methods in their designated geographical area. Territory Sales Manager's responsibilities include presenting our products to potential clients, identifying specific consumer characteristics, and recommending ways to promote and sell our products. Ultimately, you will help us grow our customer base and establish our reputation in your assigned region. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Meet or Exceed quote established for a specific territory, • Generate leads by cold calling in person and on the phone, • Answer customer questions about features, pricing, and additional services, • Attend conventions and represent Alma Lasers, • Move customers through the sales cycle, • Create and close emotional sales opportunities, • Thrive in an extremely fast-paced work environment, • Juggle multiple time-sensitive processes at once, • Possess the grit and determination to deal with rejection and continue on, • Deal with customer objections and turn them into a sale, • The unquenchable thirst to sell, • Perform product demos, • Develop and utilize all assets, reference sites, Company's clinical specialists, and partner personnel within the Territory to achieve short-term and long-term objectives., • Cross-sell products, • Collaborate with sales representatives in and out of assigned territory to share best practices, support a cohesive sales approach to meet individual and group sales quotas., • Satisfy all the Company’s Customer Care and Finance requirements as established, • Provide timely reports (weekly, monthly, quarterly, and annually to the Regional Sales Director regarding the status of each lead and sales opportunity in the pipeline through the CRM database (Salesforce)., • Build relationships with dermatologists or plastic surgeons (including ASPS, Facial Plastic, Ophthalmic, Plastic and AACS cosmetic surgeons, Urologists, OB/GYN, and private Practice Physicians), • Assist in closing deals with Territory Sales Managers, • Mentor and provide support for the Territory Sales Managers., • Carries a quota in the seven-figure range, • Initiative, • Problem Solving/Analysis, • Technical Capacity, • Organizational Skills, • Communication Proficiency, • High School, Bachelor’s degree preferred, or equivalent experience, • 2 years sales experience preferably in Medical or Capital Sales Experience, • Positive attitude and approach to the job responsibilities and the Alma team, • Microsoft Applications (MS Office, Excel, PowerPoint, and Outlook), • Salesforce experience preferred, • Excellent organizational skills, • Ability to multitask, • Superior Communication written and verbal No direct reports would assist in mentoring Territory Sales Managers Work Environment This job operates in a remote compacity. You will utilize standard office equipment such as tables, computers, and cell phones. You will also be in Dr’s offices and Spas Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 80 pounds. Travel This position requires 60% travel as needed. Work Authorization Documentation showing eligibility to work in the United States will be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Alma, Inc. is an Equal Opportunity Employer M / F / Disability / Veteran Area Sales Manager compensation is a base (75K) + uncapped commission position

Job Description Area Sales Manager Summary The Area Sales Manager is responsible for generating revenue and executing our sales methods in their designated geographical area. Territory Sales Manager's responsibilities include presenting our products to potential clients, identifying specific consumer characteristics, and recommending ways to promote and sell our products. Ultimately, you will help us grow our customer base and establish our reputation in your assigned region. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Meet or Exceed quote established for a specific territory, • Generate leads by cold calling in person and on the phone, • Answer customer questions about features, pricing, and additional services, • Attend conventions and represent Alma Lasers, • Move customers through the sales cycle, • Create and close emotional sales opportunities, • Thrive in an extremely fast-paced work environment, • Juggle multiple time-sensitive processes at once, • Possess the grit and determination to deal with rejection and continue on, • Deal with customer objections and turn them into a sale, • The unquenchable thirst to sell, • Perform product demos, • Develop and utilize all assets, reference sites, Company's clinical specialists, and partner personnel within the Territory to achieve short-term and long-term objectives., • Cross-sell products, • Collaborate with sales representatives in and out of assigned territory to share best practices, support a cohesive sales approach to meet individual and group sales quotas., • Satisfy all the Company’s Customer Care and Finance requirements as established, • Provide timely reports (weekly, monthly, quarterly, and annually to the Regional Sales Director regarding the status of each lead and sales opportunity in the pipeline through the CRM database (Salesforce)., • Build relationships with dermatologists or plastic surgeons (including ASPS, Facial Plastic, Ophthalmic, Plastic and AACS cosmetic surgeons, Urologists, OB/GYN, and private Practice Physicians), • Assist in closing deals with Territory Sales Managers, • Mentor and provide support for the Territory Sales Managers., • Carries a quota in the seven-figure range, • Initiative, • Problem Solving/Analysis, • Technical Capacity, • Organizational Skills, • Communication Proficiency, • High School, Bachelor’s degree preferred, or equivalent experience, • 2 years sales experience preferably in Medical or Capital Sales Experience, • Positive attitude and approach to the job responsibilities and the Alma team, • Microsoft Applications (MS Office, Excel, PowerPoint, and Outlook), • Salesforce experience preferred, • Excellent organizational skills, • Ability to multitask, • Superior Communication written and verbal No direct reports would assist in mentoring Territory Sales Managers Work Environment This job operates in a remote compacity. You will utilize standard office equipment such as tables, computers, and cell phones. You will also be in Dr’s offices and Spas Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 80 pounds. Travel This position requires 60% travel as needed. Work Authorization Documentation showing eligibility to work in the United States will be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Alma, Inc. is an Equal Opportunity Employer M / F / Disability / Veteran Area Sales Manager compensation is a base (75K) + uncapped commission position

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. The Senior Inspector will play a key role in overseeing the quality, safety, and compliance of electrical and/or mechanical systems on major infrastructure and transportation projects. This role ensures that all construction activities meet contract specifications, applicable codes, industry standards, and project requirements. The Senior Inspector works closely with contractors, engineers, project managers, and regulatory authorities to ensure successful project execution and timely resolution of technical issues. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications for electrical or mechanical components of the project, • Serves as the on-site inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Mechanical or Electrical engineering required, • 5+ years of experience in Mechanical or Electrical inspection, • Experience with Transportation/Infrastructure projects required, • Experience working with public agencies (i.e., Amtrak, MTA, Metro North, LIRR), • OSHA 30-hour safety course is required, • MTA Track Safety Certification is a plus, • Experience with Project Management tools (i.e., Procore, Asite), • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionThe Milhouse Aviation team is growing and as such we are looking for a Manager, Civil Engineering that wants to take the next step in their career! As the Section Manager, you will serve as the subject matter expert and will provide technical leadership that implements the development of all plans and projects for your group. The ideal candidate will be well versed in the technical concepts related to their specific discipline and will be expected to maintain a high level of continuous training to remain current on knowledge. Additionally, you will provide supervision and guidance across your projects and team members to ensure all objectives, critical issues, new concepts and policy matters are met. Project types will include but not be limited to: taxiway and runway design, deicing facilities, pavement design and striping, roadway design, utility design and grading. If you are seeking a new position that allows direct oversight of a team and the ability to continuously sharpen your own skills, come be a part of the Milhouse Aviation team!What you will do: • Provide technical expertise to staff, clients, and peers within the organization for a focused type of work., • Assist in growing business volume with existing clients through the execution of quality work., • Perform technical skills gap analysis and recommend developmental training., • Assist project managers by developing and reviewing scopes, schedules and time budgets for work to be executed in their group., • Perform as a Project Manager or technical resource meeting billability targets required for role, level and team., • Monitor groups performance and adherence to required quality, scope, schedule, and budget criteria., • Identify, analyze and resolve problems in a pro-active manner., • Cultivate professional relationships with client, peer, and team members., • Support proposal opportunities that are strategically aligned with regional and group requirements., • Participates in the RFP/RFQ process including, site visits, client meetings, scope development, preparation of project approach, technical execution plans, schedules, and interviews.Who you are:, • Bachelor’s Degree specific to their discipline work from an ABET accredited institution, • 10 + years of design experience, • PE license required, • 5+ years’ experience leading a team that specializes in the related field, • An Entrepreneurial mind set, • Proficient in Microsoft Suites, • MicroStation, • AutoCAD, • Knowledge of standard format specification development, • Design software including but not limited to XP-SWMM, HEC-Ras, WinTR-55, AutoCAD, Civil 3D, • Active memberships in discipline specific professional organization such as ASCEWhy Milhouse?, • Entrepreneurial environment with exposure to our empowering Executive team, • Encouraging, warm, and dynamic workplace with the opportunity to grow and develop, • Competitive pay and benefits package, • Milhouse University, a learning and developmental tool to up skill yourself in a class room style environment, virtual learning, or self paced online tutorials.At Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc.., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job DescriptionThe Mechanical Engineering Manager provides technical leadership, plans, organizes, and implements the development of all projects within the Aviation (Design Build) group. The Manager utilizes the technical and managerial skills necessary to ensure successful project completion. You will be well versed in multiple engineering disciplines specific to Mechanical, Electrical, FP and Plumbing plus possess exceptional project management and leadership experience to provide supervision and guidance to the group to ensure all objectives, critical issues, new concepts and policy matters are met. You are leading a team that specializes in design work across our Aviation (Design Build) portfolio. What you will do: • Provide technical expertise to staff, clients, and peers within the organization., • Builds project teams by assigning group production employees/resources to project managers., • Assists project managers by developing and reviewing scopes, schedules and time budgets for work to be executed in their group., • Collaborate across the organization to ensure that staff utilization goals are met or exceeded., • Monitors team performance to ensure group’s adherence to agree upon scopes, schedules, and budgets., • Identify, analyze and resolve problems in a pro-active manner., • Cultivate effective relationships with clients, and employees., • Support proposal opportunities that are strategically aligned with your group., • Participates in the RFP/RFQ process including, site visits, client meetings, scope development, preparation of project approach, technical execution plans, schedules, and interviews. Your background:, • Bachelor’s Degree in Mechanical Engineering required, • P.E required, • 10- 15 years MEP experience required, • Informal or formal leadership experience preferred, • HVAC design, Fire protection and associated calculations experience required, • Hydronic systems design and flow /pressure calculations experience required, • Sizing and specifying of mechanical equipment experience required At Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc.., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description Works-in-Progress Associates (WPA) is currently seeking a Junior Inspector to join our team! The project involves Design-Build activities to develop, furnish, commission, and install a Laser Intrusion Detection System (LIDS) at 13 under river tube portals and 28 stations in Manhattan, Brooklyn, Bronx, and Queens. The candidate must be flexible regarding work schedule and open to working nights and weekends. Scope of the Work: • Installation laser scanner for the LIDS in the Project’s thirteen (13) under river tubes and twenty-eight (28) stations at both portals and emergency exit shafts at the track level access point. Removal of existing motion detectors and sensors that the laser scanner portion of the LIDS will replace as intrusion detection. Installation of tamper-resistant card readers and internet protocol (IP) intercoms at all approaches outside of the laser scanner’s detection area, to allow MTA employees access without triggering LIDS’s alarm., • Removal of existing analog cameras at some Work Sites to be replaced with IP-cameras, to be connected to new/or existing Network Panels., • Upgrade/replace Access Control Panels (ACP) and Fiber Distribution Panels (FDP), with panels located in the tubes, emergency exit shafts, and at the End of Platform at the twenty-nine (29) stations. The ACP – both new and upgraded – will include equipment for the new LIDS and tamper resistant switches on enclosures and cyber locks. At certain locations, Access Control/Fiber Distribution Panel may be combined in place of 2 separate panels. If difficult to access, panels to be relocated to a maintainable location., • Baccalaureate Degree in engineering/architecture and/or construction related field from an accredited college or university, • 3 years of full-time experience as an inspector in the construction industry, • Background in Electrical Engineering is required., • MTA Track Training Card and PMG123 are required., • OSHA 30 certification is required, • Must be available to work occasional nights and weekends as needed, • A driver's license valid in New York State., • Perform daily inspections to verify that the work is being completed in accordance with the requirements of the Construction Contract Documents., • Prepare Daily Inspection Reports showing the Contractor’s labor force, the location of the construction activities, equipment used, and the actual work being performed. Reject work that does not conform to the requirements of the Construction Contract Document and immediately provide written notification to the MTA C&D Construction Manager and the Contractor of such rejection. Provide updates to the monthly Project Status Reports. Daily Inspection Reports shall be uploaded to Asite or other approved e-project software website. Original paper copies of the reports shall be filed in the Project Office as project documentation., • It is anticipated that the work under this contract will be performed during days, nights, and weekends to meet the aggressive schedule., • As a part of the daily inspection services, the inspectors are expected to fully coordinate the work activities of the Contractor forces and the assigned MTA Agency’ forces. This includes coordinating, arranging, and managing the flagging support, access and protection, agency inspection and test witnessing, track outages, work trains and other agency provided equipment and materials, and other related services., • Any issues or problems encountered during the execution of work shall be resolved expeditiously to avoid impacting the project performance. These issues and/or problems, including their resolution, shall be documented and copies of this documentation be provided to MTA C&D PM for further action., • Make immediate reports to MTA C&D PM of any field conditions that deviate from the contract drawings and make recommendations for corrective action., • Ability to build and strengthen long-lasting client relationships by providing reliable service and project solutions., • Ability to communicate clearly and effectively with all management levels. Must have excellent interpersonal, oral, and written communication skills., • Must have strong organizational and time management skills., • Must be able to adapt and prioritize, meeting deadlines, in a fast-paced environment., • Operate with a sense of urgency, quickly responding to clients., • Demonstrated leadership, responsiveness, and accountability., • Detail oriented with strong analytical skills., • Proactive and take initiative. Company DescriptionWPA is a woman-owned Owner's Representative firm and we manage construction projects for mostly nonprofits including schools, hospitals, libraries, etc. in the New York City area. We have been in business for over 30 years and have completed well over 500 projects. We currently have somewhere between 50-60 employees. Because we are a woman-owned firm we are on contracts with larger Construction Management firms such as LiRo, Hill International, Jacobs, Tectonic, Gilbane, etc. and we help them to meet their WBE goals. We provide Project Managers, Inspectors, Estimators, Office Engineers and so on. Currently we are on about 10-15 different contracts.WPA is a woman-owned Owner's Representative firm and we manage construction projects for mostly nonprofits including schools, hospitals, libraries, etc. in the New York City area. We have been in business for over 30 years and have completed well over 500 projects. We currently have somewhere between 50-60 employees.\r\n\r\nBecause we are a woman-owned firm we are on contracts with larger Construction Management firms such as LiRo, Hill International, Jacobs, Tectonic, Gilbane, etc. and we help them to meet their WBE goals. We provide Project Managers, Inspectors, Estimators, Office Engineers and so on. Currently we are on about 10-15 different contracts.

Job DescriptionPOSITION SUMMARYWe are seeking a very enthusiastic “people person” as our Aesthetician for our high-end cosmetic dermatology boutique practice in the Upper East Side. The successful candidate must have a minimum of 5 years experience and be adept to consulting clients on their skin care needs. Must be a self-starter. In this role you will deliver quality technical service with emphasis on the customer’s total appearance and be responsible for building a request client base through referrals and utilizing promotional materials available, while following all company policies and procedures. Position is available for part-time but can potentially become full-time. Compensation will be an hourly wage plus commission and is negotiable.Key Responsibilities: • Will administer aesthetic treatments to include IPL and other laser programs that will be added per the physician., • Will provide aesthetic services and perform routine administrative and clinical assignments to keep the medical spa running smoothly., • Cleans and stocks treatment room including laying out special equipment or supplies to be used during a patient visit., • Maintains supplies and equipment for treatments, including sterilization of equipment when applicable., • Being proactive in learning about the products we carry and completing trainings as necessary in order to educate our clients., • Manage social media accounts on a regular basis and in accordance with brand identity (fb, twitter, instagram, pinterest, etc.)., • Help organize digital marketing and promotional events. Job Requirements: • 3+ years experience required., • Proficiency with skincare services that include facials, chemical peels, microneedling, microdermabrasion, dermaplaning, laser hair removal and skin care consultations., • Licensed to perform aesthetics services as required by NY state., • Must be able to communicate clearly and establish and maintain effective working relationships with patients, staff and the public., • Ability to exert subtle motivation and influence. Outgoing and energetic personality a plus!, • Well-organized with high level attention to details. Fluency in product knowledge is necessary., • Ability to work independently and as part of a team.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Junior Communication Engineer (EIT). The Junior Communications Engineer will support the planning, design, coordination, and implementation of communications and low-voltage systems for large-scale infrastructure and transportation projects. The ideal candidate has hands-on experience with fire alarm systems, network systems, and low-voltage communications, and is comfortable working in a multidisciplinary construction and engineering environment. This role will collaborate closely with design teams, construction managers, contractors, and public agency stakeholders to ensure systems are compliant, constructible, and successfully delivered. Responsibilities • Design, review, and coordinate fire alarm systems in accordance with applicable codes, standards, and authority having jurisdiction (AHJ) requirements, • Develop and review communications and low-voltage system designs, including structured cabling, fiber optics, CCTV, access control, PA/VMS, and network infrastructure, • Support infrastructure and transportation projects such as transit facilities, tunnels, stations, roadways, bridges, and related facilities, • Review contractor submittals, shop drawings, RFIs, and technical proposals, • Provide construction-phase support including site inspections, testing and commissioning support, and system acceptance, • Coordinate system interfaces with IT, electrical, and other building systems, • Ensure compliance with project specifications, industry standards, and safety requirements, • Participate in meetings with clients, agencies, designers, and contractors, • Assist with cost estimates, schedules, and risk assessments related to communications systems Qualifications • Bachelor’s degree in Electrical Engineering, Communications Engineering, or a related field (or equivalent experience), • 2+ years of experience in communications or low-voltage systems within construction, engineering, or infrastructure projects, • Engineer in Training (EIT) certification required, • Working knowledge of relevant codes and standards (e.g., NFPA, NEC, local AHJ requirements), • Experience supporting construction management or design-build projects, • Strong technical writing and communication skillsPreferred Qualifications, • Experience on transportation or infrastructure projects (transit, rail, roadway, aviation, or utilities), • Professional Engineer (PE) license preferred, • NICET certification (Fire Alarm or related disciplines), • Familiarity with public agency projects and compliance requirements, • Experience with system integration and testing/commissioning processes BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionJob Title: Physician Assistant- Partnership Opportunity Salary: Up to $500k with Partnership Opportunity Overview We are seeking a highly skilled and dedicated Physician Assistant to join our multidisciplinary healthcare team. The ideal candidate will possess a comprehensive understanding of clinical assessment, diagnostic evaluation, and patient management across diverse medical settings. This role offers an exciting opportunity to contribute to patient-centered care in a dynamic environment, utilizing advanced clinical skills and a commitment to excellence. The Physician Assistant will collaborate closely with healthcare professionals to deliver high-quality medical services while adhering to regulatory standards and best practices. Responsibilities • Conduct thorough patient assessments, including history taking, physical examinations, and vital signs documentation, ensuring accurate and complete clinical data collection., • Perform diagnostic evaluations utilizing EMR systems such as Epic, Cerner, or eClinicalWorks, integrating laboratory results, imaging reports, and other pertinent data for comprehensive patient care., • Assist in the management of acute and chronic conditions across various specialties including hospital medicine, emergency medicine, ICU, neonatal intensive care (NICU), pediatric (PICU), geriatrics, and primary care., • Administer injections and medications safely following aseptic techniques while maintaining compliance with HIPAA regulations and patient confidentiality standards., • Provide advanced procedures such as suturing, airway management, ventilator support, catheterization (including cardiac catheterization), spinal taps, and gastric lavage under supervision or independently as appropriate., • Support triage processes in urgent care and emergency room settings by prioritizing patient needs based on acuity levels and facilitating timely interventions., • Participate in clinical research trials, data collection efforts, and quality improvement initiatives aimed at enhancing patient outcomes and advancing medical knowledge., • Engage in discharge planning, post-acute care coordination, hospice & palliative medicine services, and health coaching to promote continuity of care beyond the clinical setting., • Maintain accurate medical records using electronic health record (EHR) systems like eClinicalWorks or Cerner; ensure proper coding with ICD-10/ICD-9 codes and CPT coding for billing purposes., • Contribute to infection control protocols, radiation safety procedures during imaging or therapy sessions, and adhere to hospital standards including NCQA guidelines for outpatient clinics., • Demonstrate proficiency in handling complex cases involving infectious disease care, trauma management at Level I/II trauma centers, occupational health issues, addiction counseling, or esthetic laser treatments when applicable. Skills • Extensive experience with EMR systems such as Epic, Cerner, or eClinicalWorks for documentation and data management., • Proficiency in performing clinical procedures including suturing, phlebotomy, IV infusion administration, dialysis support, dermal fillers (nice-to-have), DME management (durable medical equipment), and outpatient clinic workflows., • Strong knowledge of physiology principles relevant to patient assessment and diagnostic evaluation across age groups from neonatal ventilator support to geriatric care., • Demonstrated expertise in acute pain management strategies and medication administration tailored to individual patient needs., • Familiarity with CPT coding practices for billing procedures related to outpatient visits or procedures; understanding of ICD-10/ICD-9 coding standards for diagnoses documentation., • Experience managing complex cases involving ventilator support in ICU settings or neonatal units; Level I/II trauma center experience is highly desirable., • Ability to perform basic life support (BLS) certifications; knowledge of airway management techniques essential for emergency interventions., • Skilled in telehealth platforms for remote consultations; capable of integrating telemedicine into routine practice when necessary., • Excellent communication skills with the ability to educate patients on health coaching topics such as nutrition or family planning while maintaining professionalism within diverse healthcare environments., • Strong organizational skills for managing multiple priorities including intake assessments, discharge planning, clinical trials participation, and data collection efforts aligned with hospital standards. Join our team as we deliver compassionate healthcare through expert clinical practice combined with innovative approaches that improve lives every day!

Job Description Metro Dermatology is looking for enthusiastic, dedicated, bi/multi-lingual, career-minded, and experienced medical assistants to join our dynamic and fast-paced team at our Concourse Village location, 220 East 161st Street, Bronx. Metro Dermatology of NY/NJ is a high-volume and rapidly growing medical and aesthetic dermatology practice, serving diverse communities in the Bronx, Flushing, Elmhurst, Glen Oaks, and Fort Lee, NJ. All full-time employees are eligible to participate in the Practice's competitive health, dental, and vision plans within thirty days of start date Responsibilities include: • Assisting providers with procedures and surgeries, phlebotomy, prescriptions, and maintaining efficient patient flow., • Assisting patients with laser and phototherapy treatments, • Communicating with patients, pharmacies, and insurance companies to assist with any questions, prescription inquiries, and prior authorizations., • MUST have an associate's degree or higher, • STRONGLY RECOMMEND that staff be vaccinated against COVID-19, including boosters and new vaccines, • MUST BE BILINGUAL in English and Spanish, fluency in other languages is a plus, • MUST be able to work at least one Saturday shift per month (8:45 am to 1 pm), non-negotiable, • MUST be able to start early (7:45 am) or stay late (5 pm), • LPN or RN license helpful Full-time applicants who can commit to at least two years of work preferred. Part-time positions may be available for exceptional candidates. Office hours are 8-5 on weekdays, 9-1 on Saturdays Potential Benefits: • eligible to participate in Practice's health insurance, vision, and dental coverage within thirty days, • ability to join 401(k) plan (traditional or Roth) after meeting plan eligibility requirements, • six paid holidays plus PTO and NYC Safe and Sick Leave

Job DescriptionDescription: At Biz2Credit, we seek individuals who are eager to join a dynamic and innovative fintech company on a mission to transform the lending landscape for small businesses. Our values of Collaboration, Responsibility, Empowerment, Disruption, Innovation, and Trust guide everything we do, and our purpose of helping small businesses succeed drives us forward. As a company, we believe that with the right tools and support, small business owners can achieve their dreams, and we're here to make that happen. That's why we're dedicated to developing cutting-edge solutions. One of them is our Biz2X platform, a fully configurable SaaS solution that leverages artificial intelligence and machine learning to make lending more efficient, effective, and accessible. But we're more than just another FinTech company. We're a team of individuals who bring their unique personalities, backgrounds, and experiences to work every day. We believe that diversity makes us stronger, and that's why we value a culture that is inclusive and supportive. We're looking for people who are excited about the opportunity to make a difference, who want to work in an environment that is both challenging and fun, and who are eager to bring their whole selves to work. So, if you're someone who is eager to join a company that is making a real impact, who values a positive and inclusive workplace culture, and who is ready to be a part of a team that is changing the lending landscape, we want to hear from you. Come join us and be a part of something truly special at Biz2Credit. About the Role As the Digital Marketing Manager, you will be the architect and lead operator of Biz2Credit’s performance marketing engine. This is a high-impact, data-centric role designed for a strategist who wants to own the "data and the dollars" behind our growth. Unlike a traditional digital marketing position focused on general brand awareness, you will be directly responsible for building a high-velocity machine that scales qualified loan applications across both organic and paid channels. You will sit at the intersection of high-intent media buying, technical SEO, and conversion rate optimization (CRO), turning digital demand into funded loans. This is a hands-on, data-driven role suited for a "T-shaped" marketer—someone who can pivot from high-level channel strategy to the nuances of keyword bidding and landing page experimentation. You won't just be managing a budget; you will be optimizing a complex SMB acquisition funnel at scale. Requirements: Demand Generation Leadership · Strategy Ownership: Build and manage a multi-channel demand generation strategy specifically designed to grow qualified SMB loan applications. · Full-Funnel Management: Own the end-to-end journey from initial awareness ? consideration ? application ? funded loan. · Targeting & Segmentation: Develop sophisticated targeting strategies based on industry vertical, revenue, credit profile, and specific financing needs. · Strategic Alignment: Partner with Sales, Product, and BizOps to align on lead quality standards, conversion goals, and overall funnel optimization. Paid Search & Performance Marketing · SEM Execution: Lead strategy and execution for paid search (Google Ads, Bing) with a laser focus on high-intent SMB lending keywords. · Budget Stewardship: Manage monthly budgets with clear ROI accountability and performance transparency. · Performance Optimization: Continuously optimize CPC, CPA, ROAS, and LTV through structured A/B testing and advanced automated bid strategies. · Conversion Paths: Oversee the development of high-converting landing pages, intuitive user paths, and strategic retargeting programs. Organic Search & Content Growth · SEO Strategy: Own the roadmap for technical SEO, keyword research, on-page optimization, and authoritative backlink development. · Content Synergy: Partner with the content team to produce high-value SMB lending resources that rank for key terms and convert readers into applicants. · Product Visibility: Improve organic search rankings for core products, including term loans, working capital, and revenue-based financing. · Health Monitoring: Rigorously monitor domain authority, page performance, and competitive search rankings. Analytics, Reporting & Experimentation · Insight Dashboards: Build and maintain dashboards to track the metrics that matter: funnel velocity, CAC, LTV, attribution, and channel ROI. · Testing Culture: Run rigorous A/B and multivariate tests to eliminate friction across landing pages and digital application flows. · Reporting: Provide weekly performance insights and strategic recommendations to senior leadership. · Forecasting: Predict future demand, budget requirements, and the expected impact on loan volume. Cross-Functional Collaboration · Sales Feedback Loop: Work closely with the Sales team to ensure lead quality meets standards and follow-up SLAs are optimized. · Product UX: Collaborate with Product to streamline the online loan application experience, reducing drop-offs. · Platform Alignment: Partner with the Biz2X marketing team to align messaging and leverage cross-platform data insights. · Brand Amplification: Coordinate with PR and content teams to amplify Biz2Credit’s proprietary research assets and the Small Business Lending Index. Qualifications · Experience: 5 plus years of experience in demand generation, digital marketing, or performance marketing. · Proven Track Record: Demonstrated success driving measurable funnel growth in FinTech, lending, SaaS, or high-intent lead generation environments. · Technical Expertise: Deep mastery of SEO, SEM, Google Ads, Google Analytics, and marketing automation platforms. · Analytical Prowess: Strong analytical skills with hands-on experience in A/B testing, attribution modeling, and funnel optimization. · Budget Management: Experience managing significant paid budgets with clear, bottom-line ROI ownership. · Action-Oriented Insights: Ability to translate complex data into clear insights and those insights into actionable marketing tactics. · Leadership: Excellent communication skills and the ability to lead cross-functional projects across multiple teams. · Bonus: Direct experience in SMB lending, financial services, or credit-based products. Success Metrics · Volume: Significant increase in qualified loan applications through optimized paid and organic channels. · Efficiency: Measurable reduction in CAC while simultaneously improving funnel conversion rates (CVR). · Authority: Improved organic rankings for high-value, top-tier SMB lending keywords. · Innovation: Successful launch of new landing pages and campaigns that materially increase application "starts." · Scale: The creation of a predictable, scalable demand generation engine directly tied to revenue outcomes.

Job DescriptionAbout the Job Frank Darling is an online, female-founded fine jewelry brand making custom engagement rings, wedding bands, and fine jewelry more accessible than ever before. We’ve been featured in Vogue, InStyle, WSJ, Bloomberg, Forbes, Brides, Glossy, and more for our design, sustainability, and modern take on bridal. We have an immediate, on-site opening for Sales Support in our Tribeca studio. This role is the operational backbone of the studio—supporting the client experience, managing diamond and inventory logistics, and ensuring each day runs smoothly. The ideal candidate is detail-oriented, calm under pressure, and comfortable working behind the scenes in a fast-paced, high-touch environment. Key Duties & Responsibilities Customer Facing: * Field walk-ins if no sales designer is available * Opening and answering door * Greeting customers * Offering beverage and seating customers * Contacting late-appointments * Rescheduling appointments * Fielding phone calls Showroom Organization * Manage showroom music * Manage the local inbox on Kustomer * Keep showroom clean and organized * Wash dishes * Keep vitrines clean and jewelry samples organized Operations * Handle all inbound and outbound diamond shipments * Manage sample inventory -> not reordering * Printing and bag assembly * Main liaison for gemology team for shipments * Pick up and drop off packages from fedex as needed * Pick up and drop off packages from Production HQ as needed * Liaison with Client Care regarding last minute pick ups / last minute ships * Partnering with the manager to handle any extraneous tasks * Liaison with Director of Launch and Retail Growth regarding space needs and issues * Managing internal sample transfers between showrooms * Liaison with Marketing for any in person activations * Ensure sales team has proper tools at all times Requirements and Experience: * Strong knowledge of fine jewelry styles and trends * A keen eye for detail and a high level of empathy and professionalism * Ability to work proactively and think creatively to solve problems as they arise * Solid organizational skills * Ability to multitask and juggle many client requests at once * 1 or more years of jewelry experience preferred * Extremely detail oriented * Excellent communication skills * Technologically adept Requirements & Experience * Strong knowledge of fine jewelry styles and trends * Comfort working with high-value inventory in a detail-driven environment * Technologically adept with the ability to learn and manage multiple internal systems * Keen eye for detail paired with empathy, professionalism, and good judgment * Strong organizational skills and the ability to manage multiple priorities at once * Proactive, creative problem-solver who thrives in a fast-paced environment * Excellent communication skills, both written and verbal * Ability to read diamond laser inscriptions using a jeweler’s loupe * 1+ years of jewelry experience preferred * Able to lift up to 15 pounds when required Job Details * Full-time, on-site role located in {Studio Location} * Studio hours are 10AM–6PM * Available schedule: Thursday–Monday * Salary: 50-60K Benefits * Equity Compensation – every Frank Darling team member receives stock options * Insurance – medical, dental, and vision insurance starting the first day of your second month * 401(k) – optional program * Paid Time Off – flexible, unlimited PTO policy * Pre-Tax Commuter Benefits * Employee Discounts – generous discounts for you, your friends, and your family

Job Description Fairstead is a purpose-driven real estate firm dedicated to building affordable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns and manages a portfolio of more than 27,000 apartments across 28 states. As an integrated owner, operator, and innovator, Fairstead brings development, construction, and property management under one unified platform to deliver high-quality affordable housing that serves our residents at scale. At Fairstead, we believe affordable housing should be thoughtfully designed, professionally managed, and responsibly operated. We seek to create and preserve housing that serves residents while delivering long-term value to communities, partners, and stakeholders. Fairstead challenges industry norms through our tech-forward, entrepreneurial approach to affordable housing. In addition to core real estate capabilities, we operate innovative service lines designed to improve resident outcomes, strengthen communities, and drive operational efficiency. We embrace digital transformation, data-driven decision-making, and emerging technologies, including AI, to build scalable systems that support sustainable growth, grounded in a culture of entrepreneurship, innovation, partnership, dedication, and integrity. The Leasing Consultant will provide successful sales for Fairstead Management's properties. The Leasing Consultant will demonstrate professionalism and well-informed solutions to assist in client needs during the sales process. The Leasing Consultant will have remarkable negotiation and problem-solving skills. RESPONSIBILITIES: • Provide support to Director of Leasing and / Leasing department in preparation & processing of leases through the lease cycle., • Draft initial lease documents including marketing flyers, lease proposals, new leases, renewals/extensions/expansions, amendments, license agreements, and listing/co-brokerage agreements., • Create, coordinate, and supervise the leasing & marketing collateral, including marketing signs, flyers, and other marketing branding carried out internally by the leasing team and externally by listing brokers. Coordinate with standards to ensure consistency., • Administration of procuring and listing brokerage commission process, including calculation, tracking and distribution of commission payments., • Track and record market lease comp information., • Develop and maintain strong broker relationships throughout the market., • Ensure all space showings are entered in backend system in a timely manner and ensure data is updated with accurate listings and current information., • Assist with coordination of communication brokers in connection with daily leasing activities at the properties, including follow up with same to collect information and documents necessary in the lease process., • Create portfolio tour books, stacking plans, and other miscellaneous marketing and property tour materials., • Provide miscellaneous support for external and internal requests., • Assist in helping ensure lease files are current; scan, file and distribute correspondence relating to marketing and leasing portfolios., • Develop a monthly marketing database (i.e., property availability report) relative to vacant properties to be distributed to the brokerage community., • Prepare and update investor tour books in preparation of institutional investor meetings and tours, • Provide presentation material development support including preparation of presentation documents., • Regular meetings and communications with Director of Leasing and / Leasing department, and Asset Management team to review workflow and improve procedural efficiencies., • Assist various ad-hoc/special events and projects, e.g., broker events, department events, planning/meetings, etc., • Work with and support the external leasing teams, property management teams, and acquisition, development, and disposition teams, to ensure timely and effective workflow., • Provide full administrative support for Director of Leasing and / Leasing department including phone support, typing, reports, scanning, filing and distribution of correspondence., • Responsible for maintaining vendor contracts., • Performs other related duties as required. Benefits: • Generous employer contribution for Medical Insurance through Meritain Health., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Bachelor's degree from a four-year college or university; and related experience and/or training; or equivalent combination of education and experience., • Professional understanding of leases/contracts, and related real estate and legal terms (e.g., base rent, operating expenses, capital expenditures, default, surrender, indemnification, etc.)., • Excellent written and verbal communication skills, including word processing, proof-reading, and accurate spelling., • Ability to support a multi-person team, including working well under pressure, prioritize, and meet deadlines., • Enthusiastic and positive attitude., • Ability to be articulate, conscientious, dependable, polished, and comfortable in a fast-paced environment., • Strong initiative and focus on customer service., • Strong organizational skills and the ability to prioritize work to ensure accuracy of work., • Detail orientated with strong organizational skills., • Able to effectively present information and respond to questions from management, vendors, and associates., • Ability to work collaboratively in a dynamic environment where adaptability is imperative., • Strong written and oral skills. Salary Range$31—$33.50 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionCardHeading: [Join Thérapie as a Beauty Therapist and unlock endless opportunities for career growth.]CardIntro: [Develop your skills with ongoing training, work with cutting-edge treatments, and build a rewarding career in the beauty industry. Empower yourself and others while advancing your future in a dynamic, supportive environment.]1# About the Role Thérapie Clinic is a leading provider of Aesthetic Medical and Body treatments, with over 70 clinics across Europe and New York. Driven by empowerment, disruption, and growth, we prioritise client satisfaction in everything we do. We are hiring an Esthetician for our Flatiron Clinic, offering advanced training in skin, body, and laser treatments, along with exciting career growth opportunities. We want people to ‘Do their best work at Thérapie,’ and as part of the Clinic Team, you will be integral to creating that environment and culture. At Thérapie, we offer fantastic perks, including continuous training and development, annual leave, uncapped commission, staff discount, and many more wonderful benefits, which are listed at the end of the job specification! 3# Requirements * Provide high-quality treatments for our clients in line with our clinic treatment guidelines * Conducted thorough consultations with clients to assess their needs and set realistic expectations for their treatments * Actively promote additional services and products to clients, enhancing their overall experience by tailoring treatments to best suit them * Has the ability to work with sales targets * Making sure that all client records are up to date pre and post-treatment * Maintenance and cleaning of all machines 4# Qualifications and Skills * Minimum of 2 years experience as an Esthetician or similar role with an Esthetician license. * Experience with Laser Hair Removal (desired not required) * Team Player who works collaboratively * A positive and friendly attitude with your clients * Attention to detail when dealing with client's records * Excellent standards with regards to Client Experience

Job DescriptionTake the Lead as a Sales Manager at Buck Mason! Are you a sales superstar with a knack for motivating the people around you? As a Sales Manager at Buck Mason, you’ll support the store manager in our bustling store with a laser focus on sales and the customer experience. You are responsible for driving sales and maximizing profitability within their retail store while having a deep understanding of the impact of retail operations to support driving top level sales and customer serviceIf you’re ready to roll up your sleeves, dive into the numbers, and lead a team to victory, we want to hear from you.Responsibilities: • Sales Strategist: Develop and implement sales strategies to crush store sales targets., • Trend Spotter: Analyze sales data to identify trends and opportunities for improvement., • Goal Setter: Set and exceed personal and store sales targets, supporting your team every step of the way., • Team Coach: Recruit, train, and mentor a high-performing sales team, fostering a positive and motivating work environment., • Customer Champion: Ensure every customer receives outstanding service, addressing complaints and issues promptly and professionally., • Event Planner: Collaborate with the store manager to plan and execute promotional activities and events.Required Skills:, • Proven experience in a sales management role, ideally in a high-volume retail setting., • Strong leadership skills with a talent for motivating and driving your team to success., • Excellent communication and people skills., • Sharp analytical mind, able to dive into sales data and spot trends., • Passion for the Buck Mason brand and commitment to keeping our identity strong on the sales floor., • Work occurs on a variable schedule which could include early mornings, mornings, afternoons, evenings, late nights or overnights as well as weekends and holidays.Here at Buck Mason, we're all about transparency and fairness, especially when it comes to compensation. While the base salary range for this role is $50k-$60k, your total compensation package will also include commission of 2% of your individual sales.Founded in 2013 by Sasha Koehn and Erik Allen Ford, Buck Mason makes simplified clothing for the modern man. At the heart of everything we do is the unclouded California ethos of quality, restraint, and integrity. We take iconic pieces and reconstruct them in hard-wearing fabrics, with timeless details, and the perfect fit. Our goal is to offer fashion that is less complicated, building pared-down essentials that live beyond a single season. With its corporate offices headquartered in Los Angeles, Buck Mason's retail footprint extends from sea to sea, through e-commerce and brick-and-mortar locations in Los Angeles, San Francisco, New York, Brooklyn, and more. Join us at Buck Mason, where style meets substance, and every team member plays a vital role in our success. Ready to make your mark? Apply now! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Urgently Hiring- Northeast Power Dry is urgently hiring a Re-Construction Project Manager for a full-time position in NJ. • Dispatched from home. * Must be located in New Jersey! Northeast Power Dry is seeking a Re-Construction Project Manager with a proven track record of success in the construction or restoration industry, to contribute to the growth of the Reconstruction Department. The right individual will possess subcontractor management skills and a high level of customer service. This person should be able to thrive in a fast-paced and dynamic environment that is laser-focused on customer service, operational execution, and growth. What We Offer (Our Benefits) Health & Wellness • Comprehensive medical, dental & vision insurance (some plans fully company-paid), • 401(k) with company match up to 4%, • Competitive base pay + performance bonuses / uncapped commission (if sales), • Weekly pay (for hourly/salary/ field roles), • Travel reimbursement for work-related trips, • Paid Time Off (PTO), • Paid holidays + 1 floating holiday, • Sick time that carries over year to year, • Paid training and certification support, • Opportunities for advancement and career growth, • Company vehicle, gas card & iPad (for field roles), • Within Salesforce, completely Project Manage assigned residential reconstruction projects, ensuring correct production and quality control efforts meet Dry Force standards, • Selling and closing the Residential Reconstruction job to the Homeowner, • Building estimates using Matterport software into production, • Coordinating internal pre/post-production efforts, • Assisting customers through the insurance claims process, • Ensure through an effective liaison relationship, the insurance adjuster approves the estimate, • Managing subcontractors, insurance companies, coworkers, and customers, • Inspection of job sites on a regular basis, • Effectively briefing and communicating with peers, staff, and leadership, • Complete all reconstruction jobs efficiently, maintaining profitable revenue expectations, • Bachelor’s Degree with 2-3 years of Project Management experience in a related field., • Note: While a degree is preferred, Northeast Power Dry recognizes that life/work experience speaks volumes to a candidate’s capabilities, • Daily territory travel by company car, • Exceptional customer service skills Northeast Power Dry was founded in 1996, with a mission to serve our community through our company values and provide our clients with solutions. We strive to provide a great work environment with a positive culture and provide our team members with a clear career path for growth. Our company is growing rapidly and looking for hard-working, dedicated people to join our amazing team. If you are interested in learning more about a career with Northeast Power Dry as a Re-Construction Project Manager, apply today! We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionSalary: $35-$40 Hourly DraftspersonJob Posting Dynamic and rapidly growing Brooklyn-based fabrication shop is looking fora full-time, in-house Draftsperson with a strong background in fabrication and knowledge of materialsto help usdraftproject shop drawings, 3D models, and CNC-ready files as they pertain to approved projects, as well as the coordination of drafting information flow with Project Management and Production staff. Position Responsibilities include: • Creating build drawings to the specific needs of the project as directed by the Drafting Manager and Project Managers, • Maintaining the Drafting Schedule as set by the Drafting Manager., • Creation and organization of Rhino files and corresponding documents., • Working with the Drafting Manager to complete drafting in a way that corresponds to our existing build methods, and communicates procedures and designs clearly., • Submitting drawings to Project Managers for approval and revisions., • Assessing potential material issues or structural problems., • Sending CNC-ready files to the CNC operators as well as the and communicating with them for efficient cutting and delivery of parts., • Responsible for identifying ways to improve the efficiency and accuracy of drawings and documentation processes to maintain the overall project schedule., • Other duties that may be assigned. Position Requirements: Education: Required:High School Diploma. Required:College Degree in Architecture, Engineering, Industrial Design, or a related drafting-based field. Years of experience in a similar existing position are also acceptable. Experience: 3 years of drafting for fabrication experience is preferred, with at least 1 year of direct and 2 years of indirect drafting experience working in a drafting environment. Experience in the fabrication or construction industry is preferred. Skills and Knowledge: • Dependable, independent, and hardworking., • Knowledge of fabrication methods and common building practices., • Ability to produce ready to build drawing sets., • Detail-oriented and well-organized., • Exceptional Rhino3D skills is required, Solidworks, Fusion360, Blender, Zbrush and AutoCAD experience is a plus., • Skilled at multitasking and working toward multiple deadlines., • Knowledge of CNC processes and operations. RhinoCAM preferred., • Able to communicate effectively with peers and management., • Proficiency in Google Workspace, or similar platforms. This position is available immediately. TheDraftspersonis expected to be reasonably self-sufficient from the start, relying on their past experience.This position will include a compensation rate commensurate with experience level.This is a full-time position. Standard work days and hours of work are Monday through Friday, and range between 8:00 a.m. to 5:00 p.m. as operations and/or business needs dictate. Some flexibility in hours is allowed, but the employee should be available during the core work hours of 8:00 a.m. to 5:00 p.m. and must work 40 hours each week tomaintain full-time status.Extended hours may be required based on the business need. Although we are primarily a carpentry based fabrication facility, we specialize in all types of fabrication and installation projects. This includes large and small experiential events, architectural millworks, custom art pieces, retail spaces, and photo sets. Our facilities have multiple CNC machines, laser cutters, 3D printers, and wood and metal shops. The current management team has a variety of backgrounds that help us tackle a wide array of builds, and we are looking for someone with a varied background and skill set to help facilitate a flexible and ready work environment. Please visit our website to see what we do: Please be sure to include fabrication-level shop drawing examples in your portfolio. Position Type: Full-time Starting Compensation: $35 - $40/hr. Overtime opportunities available after 40 hours per week Medical Benefits (Health, vision, dental) after a 30-day waiting period Paid Time Off after a 30-day waiting period SIMPLE IRA plan available with Employermatching contribution up to 3% of yearly compensation after 3 months of employment.

Job DescriptionSalary: $25hr - $35hr Over-hire Carpenters A dynamic and rapidly growing Brooklyn-based fabrication shop is looking for highly-skilled Carpenters to work with us as fabricators and builders on an overhire and project-to-project basis. Carpenters are expected to build projects while working closely with other staff members to efficiently and effectively produce a wide variety of fabrication work. Candidates for the position should have either great experience in carpentry-based builds or be proficient in most aspects of fabrication techniques within The Factory NYCs scope. Responsibilities include: • Fluent in English, • Good communication and interpersonal skills, • Ability to read and understand shop drawings, • Strong math skills, • Experience and knowledge of handheld and stationary tool use and maintenance, • Fabrication shop experience, • Excellent knowledge of wood products and dimensional lumber, • Must be able to lift 75 lbs Additional but not required Skills: • Scenic Work Experience, • Truck Driving Experience, • Advanced Metalworking and Welding, • CNC Milling Experience, • Rhino and 3D Modeling experience Position Type: Overhire Starting Compensation: $25hr -$35hr This position is Overhire / Project to project and available immediately. This position will include a compensation rate commensurate with experience level. The Factory NYC is a custom fabrication shop with multiple locations in Brooklyn NY. Although we are primarily a wood fabrication facility, we specialize in all types of fabrication and installation projects. This includes large and small experiential events, architectural millworks, custom art pieces, retail spaces, and photo sets. Our facilities have multiple CNC machines, laser cutters, 3D printers, and wood and metal shops. The current team has a variety of backgrounds that help us tackle a wide array of builds and we are looking for someone with a varied background and skill set to help facilitate a flexible and readied work environment. Please visit our website to see what we do: If you think you would be a good fit at The Factory NYC and have the required experience, please send your resume and work samples.

Job Description Middle & Prep School Computer Science and Robotics Teacher Columbia Grammar & Preparatory School seeks an outstanding, student-focused Computer Science Teacher who will help develop an expanding technology curriculum. This person will be responsible for teaching Middle School computer science classes, co-teaching 9th-Grade Robotics classes as well as intermediate and advanced high-school electives in Computer Science (Python & Java), Robotics, Design, Engineering and Fabrication. For middle school work, We follow the Project Lead the Way curriculum that uses activities, projects, and problem-based learning experiences with real-world applications. Educators must be certified by Project Lead the Way in order to teach the course. CGPS will pay all associated costs for attending the course training. DUTIES AND RESPONSIBILITIES: • Teach Middle School Technology classes, following the PLTW Design and Modeling course for 6th grade, Computer Science for Innovators & Makers for 7th grade, and in Automation & Robotics in 8th grade, • Collaborate with the Technology Department Head and department colleagues on instructional practices, assessment practices, and enhancements to the curriculum, • Model and teach acceptable use of technology and digital citizenship concepts and skills, including AI Literacy, • Lead clubs or robotics teams, as assigned, • Co-teach 9th grade Robotics classes, • Develop and teach intermediate and advanced Computer Science, Robotics, and Engineering courses at the high school level (grades 9 through 12.), • Organize and maintain the innovation and design lab (i.e robotics supplies, 3D printers, laser cutters, etc.), • Collaborate with faculty in other departments to explore opportunities for interdisciplinary projects., • Provide faculty, students, and staff with guidance on using educational technology., • Lead and advise the Prep School Robotics League Teams, • Demonstrate effective classroom management and the ability to establish and maintain a collaborative, supportive learning environment, • Establish student safety protocols for tools and equipment Skills: • A demonstrated ability to innovate, problem-solve, and differentiate the curriculum to support and enrich the learning experience for all students., • Experience with troubleshooting basic hardware and software issues relevant to classroom technology and STEAM education, • An intellectual curiosity, an aptitude for learning, and a commitment to ongoing professional growth, • Excellent collaboration and communication skills and a desire to work with a team, • Ability to communicate effectively and establish rapport with families both orally and in writingQualifications:, • BA/BS degree in Computer Science, Electrical Engineering, Mathematics, or a related technical field, or equivalent practical experience., • Strong understanding of at least one programming language and a desire to learn more., • Experience with Vex or FIRST Robotics, Arduino, or other hardware platforms., • Experience with tools for fabrication such as 3D printers, hand and power tools, Cricut machines, and/or CNC machines., • Experience teaching in a classroom setting., • Passionate about encouraging young people to take on complex and challenging ideas., • An intellectual curiosity, an aptitude for learning, and a commitment to ongoing professional development., • Experience with troubleshooting hardware and software issues relevant to classroom technology and STEM education., • Excellent collaboration and communication skills, and a desire to work with a team., • 7:30am-3:30pm Monday through Friday, • Weekly faculty and department meetings until 4:30pm The salary range for this role is $76,000.00 - $118,500.00. We also offer a warm and supportive culture as well as exceptional benefits including but not limited to: • Comprehensive medical, dental & vision plans with a free medical coverage option for employee only coverage, • Free vision coverage, • Flexible Spending Accounts for Medical, Dependent Care, Parking & Transit, • 8% Annual Employer Contribution to retirement after one year of full time service, • Basic Life Insurance, • Enhanced Short Term Disability Coverage, • Long Term Disability Coverage, • Low cost additional benefits including voluntary life insurance, critical illness coverage and pet insurance, • Additional Aflac policies, • Free breakfast & lunch when school is in session, • Discounted parking CGPS nurtures each student’s unique passions and talents inside and outside the classroom, unifying and inspiring members of its community in a rigorous but relaxed learning environment, preparing them for the finest colleges and instilling in them the confidence, ethical values and sense of purpose to embrace challenges, to achieve their dreams and to improve the world. Columbia Grammar & Preparatory School is an equal employment opportunity employer. Employment on the basis of race (including hairstyle), color, religion, creed, ancestry, sex, sexual orientation, gender and gender identity, gender expression, national origin, alienage, age, pregnancy, marital/partnership status, immigration or citizenship status, status as a veteran or active military service member status, disability, genetic predisposition, status as a victim of domestic violence, prior arrest or conviction record, caregiver status, credit history, salary history, unemployment status, sexual or reproductive health decisions, or any other characteristic or status protected by applicable law (collectively, the “Protected Characteristics”). Powered by JazzHR w7vmlaCtwG

Job Description Ophthalmic Technician Location: New York, NY Contract Duration: 13 Weeks Shift: Day Shift | Monday–Friday Hours: 7:45 AM – 4:30 PM (40 Hours/Week) Position Overview "Navitas Healthcare, LLC" is seeking a skilled and detail-oriented Ophthalmic Technician for a 13-week contract assignment in a fast-paced outpatient clinical setting. The ideal candidate will support ophthalmologists by performing preliminary eye examinations, diagnostic testing, patient preparation, and clinical assistance while delivering exceptional patient care. Key Responsibilities • Perform preliminary ophthalmic screening examinations for physician evaluation, • Conduct visual field testing, including central and peripheral vision assessments, • Perform ocular motility, color vision, and pupil function testing, • Measure intraocular pressure using tonometry and related methods, • Obtain and document patient medical and ocular history accurately, • Assist with ophthalmic photography, diagnostic procedures, and outpatient testing, • Prepare patients for examinations, procedures, and minor surgical interventions, • Maintain efficient patient flow throughout the clinic, • Educate patients on procedures and address questions or concerns professionally, • Clean, calibrate, and maintain ophthalmic instruments and equipment, • Prepare and sterilize instruments for minor procedures and laser treatments, • Assist physicians during office-based examinations and procedures, • Ensure exam rooms and procedure areas remain clean, organized, and fully stockedRequired Qualifications, • High School Diploma or GED required, • Certified Ophthalmic Technician credential required, • Strong communication and interpersonal skills, • Ability to perform basic ophthalmic diagnostic testing independently, • Proficiency in English (reading, writing, and speaking), • Ability to work effectively in a fast-paced clinical environment For more details contact at or Call / Text at 516-862-1169. About Navitas Healthcare, LLC certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionDermatology Physician Assistant Opportunity - Bronx, New York Location: Bronx, New York 10466 Position: Physician Assistant - Dermatology (1 opening) Thrive in a bustling dermatology practice in the Bronx, treating skin conditions in a diverse, high-need community. Key Responsibilities: • Perform full skin exams, biopsies, and cryotherapy, • Manage acne, eczema, psoriasis, and cosmetic concerns, • Injectables (Botox/fillers) and minor surgeries like excisions, • NCCPA-certified PA with NY license, • Dermatology experience preferred; surgical derm skills ideal Apply Now: Send CV, derm procedure experience, and availability. -- A K A S H M I S H R A The Provider Finder Lead Recruiter 843-408-4018

Job Description Position Summary A client of AlphaStaffHCM is seeking an experienced Photonic Integrated Circuit (PIC) Test Engineer to test, evaluate and analyze the photonic devices for market and internal quantum applications. This role will collaborate closely with the PIC design and fabrication team to iterate and optimize out internal PDK, customized devices. The test work should be summarized to debug with design team and fabrication team. Key Responsibilities Testing & Characterization • Oversee optical and electrical characterization of fabricated PICs, analyzing performance against design targets., • Identify and implement design or process improvements based on test data., • Develop automated test procedures where applicable., • Collaborate with the fabrication team to estimate the fabrication robustness of the PDK and customized design., • Collaborate with the design team to analyze each fab run and iterate for next run. Required Qualifications • Ph.D. or master’s degree in electrical engineering, Applied Physics, Photonics, or related field., • 3+ years of hands-on experience in PIC test on fiber optics and free space optics, and wafer level testing, • 1+ years of experience with high-speed EOM Characterization with VNA/LCA., • Programming skills for data analysis and automation (Python, MATLAB)., • Strong knowledge of waveguide theory, coupling mechanisms, electrical and photonic device physics. Preferred Qualifications • Experience in quantum and nonlinear photonic systems or related applications., • Experience in packaged hybrid photonic/electronic chip test., • Experience in yield estimation and defect analysis., • Experience in lab equipment remote control and automated test. Key Attributes • Strong communication skills and the ability to influence across teams., • Passion for innovation and pushing the limits of photonic technology. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description Join Our Growing Veterinary Family at Dongan Hills Veterinary Practice and Integrative Wellness Center! About Dongan Hills Veterinary Practice and Integrative Wellness Center: Are you a compassionate and enthusiastic veterinarian seeking more than just a job? Join our family at Dongan Hills Veterinary Practice and Integrative Wellness Center, a thriving 2-doctor small animal practice deeply rooted in the welcoming Dongan Hills community since 1986. Located in Staten Island, the "Borough of Parks," our practice offers a supportive, family-centered environment where team wellness is paramount and genuine connections with clients and their beloved pets are at the heart of everything we do. Imagine building your career in a borough known for its abundance of green spaces and natural beauty, offering a peaceful retreat from the city bustle. We've laughed, we've cried, and we've built connections that span generations of families and their furry companions in this friendly and community-oriented borough. We're looking for a highly motivated, enthusiastic, and compassionate veterinarian who is eager to foster these deep relationships and thrive in a supportive, family-centered environment. Additionally, under the guidance of Dr. Brown, our practice offers a unique approach to veterinary medicine, seamlessly blending conventional therapies with evidence-based integrative and holistic modalities. Our comprehensive treatment options include acupuncture, ozone therapy, mistletoe therapy, Class IV laser therapy, herbal medicine, and nutritional therapy, among other innovative approaches. This position offers the opportunity to work alongside a forward-thinking leader dedicated to providing the best possible care for our patients. If you're passionate about providing exceptional care and becoming an integral part of a close-knit community, we invite you to explore this unique opportunity. Experience the difference of a practice where you're known by name, and your dedication is met with heartfelt appreciation every day, all within a borough that boasts a unique blend of urban convenience and natural charm. Responsibilities: As a Full-Time Veterinarian at Dongan Hills Veterinary Practice and Integrative Wellness Center, your responsibilities will include: • Providing comprehensive medical and surgical care to a variety of animal patients., • Performing physical examinations, diagnosing illnesses, and developing appropriate treatment plans., • Administering vaccinations, medications, and treatments., • Performing surgical procedures, ranging from routine to more complex cases., • Providing preventative care counseling, including nutrition, behavior, and parasite control., • Maintaining accurate and thorough medical records., • Communicating effectively with clients, providing education and support regarding their pet's health., • Collaborating effectively with veterinary technicians, assistants, and other team members., • Staying current with the latest advancements in veterinary medicine through continued education., • Adhering to all ethical and professional standards of veterinary practice., • Participating in staff meetings and contributing to the overall success of the clinic.Qualifications:, • Doctor of Veterinary Medicine (DVM/VMD) degree from an accredited institution., • Valid and active license to practice veterinary medicine in the state of New York., • Strong diagnostic and surgical skills., • Excellent communication and interpersonal skills., • Ability to work effectively in a team environment., • A compassionate and caring attitude towards animals and their owners., • A commitment to providing high-quality veterinary care.Benefits: We are committed to exploring innovative treatments. We currently offer a wide range of advanced therapeutic and diagnostic tools, including ozone therapy, laser therapy, acupuncture, MAH UVB, comprehensive in-house lab capabilities, digital radiography, and more! We value our team members and are pleased to offer a comprehensive benefits package, including: • Signing Bonus: Starting at $25,000, with the final amount based on experience., • Retirement Savings: 401(k) with employer matching., • Paid Time Off (PTO): For vacation, sick leave, and personal days., • Continued Education: Support and financial assistance for professional development and conferences., • Licensing & DEA Fees: We will cover the cost of your state veterinary license and DEA registration., • Health Insurance: Obtained by employee via Marketplace - 100% reimbursement added to salary by employer., • This role offers a compensation structure that includes a base salary in addition to commission *, • Base salary will be determined based on the candidate's qualifications and relevant experience *

Job Description Pediatric Dentist Opportunity - Bronx, NY Join Our Growing Team at PDS Management Services! PDS Management Services is seeking skilled Pediatric Dentists or General Dentists with Pediatric Experience to provide exceptional oral healthcare to children in the Northeast. This position is available on Mondays, Wednesdays, Fridays, and Saturdays. The position focuses solely on examinations and treatment planning-allowing you to practice efficiently with the support of experienced assistants and hygienists. Why Join Us? Full-Time Sign on Bonus: $3000-$4000 Part-Time Sign on Bonus: $1800-$2400 () Payment Schedule [(after start date of dentist)]: ✅ 30 Days: 25% of the bonus ✅ 90 Days: 50% of the bonus ✅ 180 Days: 25% of the bonus () • Competitive Compensation - Earn $125 per hour with a steady patient flow., • Sign-On & Referral Bonuses - Rewarding incentives for new team members and referrals., • Professional Growth - Work alongside nationally renowned pediatric specialists in a thriving practice., • Perform comprehensive dental exams and develop personalized treatment plans for pediatric patients., • Provide occasional treatments, including cleanings, fluoride applications, and sealants., • Educate patients and parents on proper oral hygiene to promote long-term dental health., • Maintain accurate patient records and ensure compliance with HIPAA regulations., • DMD/DDS with a strong background in pediatric dentistry., • Proficiency in EMR systems (e.g., Dentrix)., • Excellent patient assessment skills and familiarity with medical terminology., • Experience in oral surgery and working with pediatric patients., • Knowledge of HIPAA regulations and medical coding best practices. At PDS Management Services, we are committed to fostering a child-friendly, patient-focused environment. Our offices are professionally managed and experiencing tremendous growth due to expanded education and referral programs. We offer a comprehensive range of services, including: ✅ Pediatric Dentistry ✅ Orthodontics ✅ Laser Surgery ✅ Conscious Sedation ✅ Outpatient Care We also provide specialized training programs to help you enhance your expertise and grow your career within our innovative organization. Position Details • Job Type: Full Time, • Expected Hours: 32 hours per week, • Bonus Opportunities, • NY Dental License (Required) Job Type: Full Time Pay: $125.00 per hour Expected hours: 32 hours per week Benefits:(27 hours or more a week) • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Referral program, • 10 hour shift, • 8 hour shift, • Saturday, Tuesday, Thursday, • Bonus opportunities

Job Description Associate Dentist ASSOCIATE GENERAL DENTIST | $175K–$350K+ EARNING POTENTIAL | MODERN DIGITAL PRACTICE | 4-DAY WORKWEEK Sign-on bonus Relocation bonus Retention bonus What We Offer Annual earning potential of $225,000–$400,000+, commensurate with clinical skill and procedure mix Compensation based on 42.5% of adjusted production minus lab fees (open to discussion) Daily minimum of $1700 guaranteed during the first 3 months for onboarding support Full clinical autonomy in treatment planning and execution 4-day workweek (Monday–Thursday) with three-day weekends every week Calm, well-supported work environment with experienced clinical and administrative staff A very systematized office for smooth and efficient work environments and low- stress for both patients and staff No weekend hours, no Medicaid, and no HMOs Dental vision insurance (optional) 401k (optional) Qualifications DDS or DMD from an accredited dental school Active dental license Minimum of 3 years of clinical experience preferred Proficient in general procedures and committed to high-quality, patient-centered care Team-oriented, dependable, and motivated to grow clinically and financially Schedule Full-Time: Monday–Thursday, 8:00am to 6:00pm (with a 1-hour lunch break) o Part-Time: Open to 2 or 3 days per week, with flexible scheduling options o Ideal for: Those seeking a balanced work-life schedule, with 3-day weekends every week Technology Our practice is fully digital and equipped with: CEREC same-day crown technology Intraoral scanners for efficient and accurate diagnostics KaVo implant system for advanced surgical and restorative procedures Laser dentistry for soft tissue procedures and improved patient comfort We continually invest in modern equipment to support high-quality, efficient, and patient- centered care. Daily Guarantee Yes What procedures will the associate be doing? Preventive and comprehensive care in all aspects of general dentistry Bread-and-butter procedures including: o Crown and bridge (including implant restorations) o Composite restorations o Surgical extractions and bone grafting o Dentures and removable prosthodontics o Endodontics for anterior and premolars Optional procedures such as molar endo, implant placement, clear aligners, and cosmetic cases (not required but strongly supported and highly compensated)

Job Description Associate Dentist ASSOCIATE GENERAL DENTIST | $175K–$350K+ EARNING POTENTIAL | MODERN DIGITAL PRACTICE | 4-DAY WORKWEEK Sign-on bonus Relocation bonus Retention bonus What We Offer Annual earning potential of $225,000–$400,000+, commensurate with clinical skill and procedure mix Compensation based on 42.5% of adjusted production minus lab fees (open to discussion) Daily minimum of $1700 guaranteed during the first 3 months for onboarding support Full clinical autonomy in treatment planning and execution 4-day workweek (Monday–Thursday) with three-day weekends every week Calm, well-supported work environment with experienced clinical and administrative staff A very systematized office for smooth and efficient work environments and low- stress for both patients and staff No weekend hours, no Medicaid, and no HMOs Dental vision insurance (optional) 401k (optional) Qualifications DDS or DMD from an accredited dental school Active dental license Minimum of 3 years of clinical experience preferred Proficient in general procedures and committed to high-quality, patient-centered care Team-oriented, dependable, and motivated to grow clinically and financially Schedule Full-Time: Monday–Thursday, 8:00am to 6:00pm (with a 1-hour lunch break) o Part-Time: Open to 2 or 3 days per week, with flexible scheduling options o Ideal for: Those seeking a balanced work-life schedule, with 3-day weekends every week Technology Our practice is fully digital and equipped with: CEREC same-day crown technology Intraoral scanners for efficient and accurate diagnostics KaVo implant system for advanced surgical and restorative procedures Laser dentistry for soft tissue procedures and improved patient comfort We continually invest in modern equipment to support high-quality, efficient, and patient- centered care. Daily Guarantee Yes What procedures will the associate be doing? Preventive and comprehensive care in all aspects of general dentistry Bread-and-butter procedures including: o Crown and bridge (including implant restorations) o Composite restorations o Surgical extractions and bone grafting o Dentures and removable prosthodontics o Endodontics for anterior and premolars Optional procedures such as molar endo, implant placement, clear aligners, and cosmetic cases (not required but strongly supported and highly compensated)

Job DescriptionMilhouse Engineering & Construction is seeking an accomplished and visionary leader to join our team as Vice President, Aviation. In this pivotal role, the Vice President of Aviation provides technical leadership while planning, organizing, and implementing the development of all projects and initiatives within the aviation group. This leader will bring strategic vision, technical expertise, and exceptional leadership skills to drive the success of their team’s projects and ensure Milhouse consistently meets and exceeds customer expectations. The Vice President, Aviation spearheads the growth and profit goals of the aviation team by leading a multidisciplinary group specializing in the planning, design, and construction services of diverse engineering projects. This is an exciting opportunity to guide a team of talented engineers while shaping the future of aviation infrastructure with one of the industry’s most innovative and culture-focused firms.What you will do: • Develop and implement strategic plans for the Aviation division, aligning with the company's overall mission and vision, • Grow business volume with existing and new clients, • Oversee the planning, design, and execution of Aviation projects, ensuring they meet quality standards, budgets, and timelines., • Administrative responsibilities include but are not limited to oversight of quality for all work, maintaining a 15% overall profitability for the Group, ensuring that the Project Management Plan is being followed, recovery plan reviews for projects over budget and schedule, invoicing oversight, staffing requirement reviews and goals and performance reviews of direct report subordinates, • Collaborate across the organization to ensure that team utilization goals are met or exceeded, • Cultivate and maintain strong relationships with clients, stakeholders, and regulatory agencies, particularly FAA, • Lead, mentor, and develop a team of multi-disciplined engineers and project managers, fostering a culture of excellence and continuous improvement, • Identify and pursue new business opportunities in the Aviation Industry including major carrier airlines, airside and landside design and Construction Management, including proposal development and presentations, • Cultivate effective relationships with clients, and team members, • Support proposal opportunities that are strategically aligned with your group, • Participates in the RFP/RFQ process including, site visits, client meetings, scope development, preparation of project approach, technical execution plans, schedules, and interviews, • Ensure all projects comply with federal, state, and local regulations, as well as industry standards and best practicesWho you are:, • Bachelor’s degree in Civil, Electrical or Mechanical Engineering or a related field, • Professional Engineer (PE) license in Illinois required, • Minimum of 15 years of experience in design engineering, with at least 5 years in a leadership role, • Minimum of 5 years of experience in the aviation industry, • Proven ability to lead and develop high-performing teams, • Excellent verbal and written communication skills, with the ability to effectively interact with clients, stakeholders, and team members, • Strong understanding of aviation engineering principles, project management, and regulatory requirementsAt Milhouse, we’re more than just a place to work — we’re a place to grow, thrive, and be celebrated. Here’s how we invest in you:, • Medical, Dental & Vision Coverage – Reach out to learn how your deductible could be covered 100% through Garner Health!, • Company Sponsored Life Insurance and Short-Term Disability – We’ve got your back when life takes unexpected turns., • Voluntary Coverages – Take control of your well-being with added coverage options., • Discounted Gym Membership – Stay active with wellness options that support your fitness goals., • Competitive Base Salary – Earn what you're worth in a performance-driven culture., • 401(k) Retirement Plan – Build your future with confidence., • Professional Development Incentives – Get rewarded for growing your skills — including bonuses for earning your P.E. License., • Milhouse University (Cross-Functional Training) – Expand your expertise with internal training built to elevate your career and receive PDH credits for applicable training towards professional engineering licenses, etc., • Employee Education & Development Program – Tuition assistance and learning opportunities to keep you moving forward., • Generous PTO + Paid Holidays – Rest, recharge, and enjoy the moments that matter most., • Paid Parental Leave – Bond with your new arrival — and yes, we’ll even cover a year of diapers!, • Extracurricular Sports Teams – Join our summer Volleyball and Softball squads for fun off the clock., • Employee Recognition Program – Be celebrated for the impact you make., • Employee Referral Bonus – Bring great people on board and get paid for it., • Transit Benefits Program – Save on your daily commute.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Qualified Elevator Inspector (QEI) to support our on-going and future transportation/infrastructure projects. Naik is a New York-New Jersey engineering services firm which specializes in engineering design, field inspection, and Project Management/Construction Management, primarily in the transportation infrastructure industry. Responsibilities • Performs trade specific code and/or Quality Control inspections on various phases/aspects of elevator/escalator/lift equipment., • Performs all duties of a QEI to detect possible defects and faults in equipment fabrication, testing, installations, maintenance, operation, and recommend or stipulate appropriate remedial measures per Jurisdictional requirements., • Reads, interprets, and comprehends equipment operation and installation plans and instructions., • Has knowledge of standard testing devices and methods to ensure equipment operation meets established requirements., • Applies code requirements and related standards in accordance with state, local, and national regulations, as well as department policies., • Generates inspector’s reports., • Coordinates work schedules with elevator service companies/technicians to ensure maximum operational efficiency., • Works cooperatively with construction project managers, property managers, service companies, and the project team., • Conducts all work operations in accordance with established safety practices, ensuring all work is completed without hazard to self or others., • Understands mechanical and electrical principles as they apply to elevators/escalators and similar controls., • Recognize possible violations and defects and be able to correct them., • Applies the American National Standard Safety Code for Elevators, Dumbwaiters, Escalators and Moving Walks, as referenced and amended in the Construction Code, as well as jurisdictional requirements., • Reads architectural, engineering, and installation drawings, including hoist way and machine room layouts, schematic drawings and comprehending and make inferences from written materials and code documents. Qualifications • Bachelor’s degree in mechanical or electrical Engineering, or related field of study preferred., • A degree in Mechanical Engineering and/or Electrical Engineering preferred. Associate degree with relevant years of industry experience will also be considered., • Minimum of 10 years of relevant experience in the engineering construction industry. performing escalators and elevators inspections, service, and testing of such systems., • Current QEI certification., • Competence in electrical construction principles – NFPA 70, voltage, currents, grounding, able to read electrical circuit diagrams., • Ability to innovate by creating sound alternatives and better ways to solve clients’ toughest challenges when needs arise., • Ability to write technical reports clearly and concisely., • Demonstrated experience of collaboration in a diverse and inclusive team, working together toward technical excellence., • OSHA 30-hour safety course is preferred., • MTA Track Safety training is highly desirable. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job Description StretchMed is a 1-on-1 assisted stretching model with a purpose to eliminate chronic pain, increase mobility, rejuvenate, and help you move well! Are you skilled in supporting operations and contributing to a fitness-focused team's success? Can you assist in delivering exceptional stretching services and customer care, thereby supporting our business's growth? If these challenges excite you, we're eager to connect with you! StretchMed® (Hoboken) is searching for a highly motivated and capable individual to join our fast-growing team as a Part Time Studio Stretch Therapist This position offers: • Opportunities for career advancement Who We Are StretchMed® is a 1-on-1 assisted stretching model that comes out of the fitness space. Our purpose is to eliminate chronic pain, increase mobility, rejuvenate, and help you move well! Our proprietary stretch protocols were developed from over 50+ years of hands-on experience working with clients in fitness. StretchMed® Certified Stretch Therapists (CST™) use a combination of PNF (Proprioceptive Neuromuscular Facilitation) and static stretching techniques in 1-on-1 stretch sessions anywhere from 1 to 2 times a week, depending on the needs and goals of our clients. All stretch appointments end with percussion therapy, to accelerate and enhance tissue repair by maximizing blood flow and muscle relaxation. Job Responsibilities: • Stretch Therapy - Performs stretch therapy. Supports efforts to ensure client satisfaction & retention., • Operational Support - Supports the Studio Manager in overseeing studio operations to ensure effectiveness and compliance with company policies, protocols, and standards set by the local franchise owner., • Sales and Service Excellence - Contributes to driving sales performance and service excellence. Supports team members and the Studio Manager in achieving individual and studio targets., • Marketing and Community Engagement - Assists in planning and executing marketing initiatives, including pop-up events, building affiliate relationships, grassroots marketing, B2B outreach, and social media content creation. Responsibilities • All stretch appointments end with percussion therapy, to accelerate and enhance tissue repair by maximizing blood flow and muscle relaxation, • Stretch Therapy - Performs stretch therapy and leads a team of therapists to ensure consistent high quality care & service, • Oversees client satisfaction & retention, • Operations - Assumes total responsibility to oversee and ensure the studio is operating effectively, according to company policy & protocol, and local franchise owner standards, • People Leadership & Management - Direct, develop, recruit, train, and manage studio team members, • Sales Success - Drives sales performance, • Fully accountable for individual, team members, and studio results, • Marketing, Outreach, Social Media - Responsible for planning & executing pop-up events, building affiliate relationships, grassroots marketing, B2B outreach, coordinating with ad agencies, and creating social content, • Admin & other - Duties may include but are not limited to; lead follow-up, ensures studio cleanliness, scheduling clients / team members, leading team meetings, attending company meetings. responding to client inquiries & issues, reviewing & completing reports, supplies & inventory, retail management, etc, • Initially you will stretch a decent amount during the start up phase, • You will have complete management of the Hoboken, NJ location, overseeing all operations under the leadership and direction of the location owner, • Certification, license, or degree in exercise science related field, • Ability to learn fast and follow systems, • Exceptional relationship-building skills, with a focus on servicing clients to ensure a positive, impactful client experience and foster long-term loyalty, • Understanding of sales strategies and customer service best practices, • Must be able to reliably commute to location, • Ability to stand for extended periods of time, • We have a passion for health and fitness, • We believe in having laser focus on our customer's needs, • We are continually learning, • We believe in honest, open communication, • We believe in accountability leads to success Pay: From $25.00 per hour Benefits: • Night Shift (Preferred)

Job DescriptionAesthetic Provider / Injector (NP or PA) Location: Acne Clinic NYC / New York, NY Compensation: $65-$85/hr plus bonus potential Schedule: Part-time (2-3 days per week with potential for full-time growth) Acne Clinic NYC established and busy aesthetic practice driven by results, education, and lasting transformation. Known for our supportive culture, patient-centered focus, and collaborative team dynamic, we serve clients seeking top-tier expertise in skincare and medical aesthetics. We are actively hiring a Nurse Practitioner (NP) or Physician Assistant (PA) to join our team of elite providers to perform cosmetic injectable and other aesthetic services. This role requires a passion for aesthetic medicine and helping people look and feel their best. We’re looking for a confident provider who thrives in a culture of excellence, accountability, and patient-first care. Experience with wellness services such as IV vitamin therapy is preferred. What We Offer: • Competitive compensation (base + bonus incentives), • A positive, supportive environment where your expertise and contributions are valued, • Flexible schedule, • Training in areas where needed (must be strong in cosmetic injectables) Key Responsibilities: • Perform cosmetic injectable (neurotoxins, dermal fillers, and biostimulants) and aesthetic laser and other aesthetic treatments, • Perform good faith exams for medical aesthetic treatments, • Provide an exceptional patient experience and natural-looking results, • Maintain accurate EMR documentation and uphold clinical compliance standards Who You Are: • Licensed NP or PA in good standing in New York, • Minimum 2 years of hands-on experience with cosmetic injectables., • Laser, energy-based device, and/or other aesthetic treatment experience preferred, but will train the right candidate, • Experience with dermatology or acne / acne scar treatments a plus, • Passionate about aesthetics and delivering natural-looking results, • Strong communicator that can build rapport and loyalty with clients

Job Summary The Manufacturing Engineer is responsible for providing improvement solutions for the facility's production tooling, equipment, and procedures to ensure efficient operations. This hands-on position requires spending the majority of time on the manufacturing floor and must be able to take projects from conception to completion. Primary Job Responsibilities \n • Programming for all production processing needs.\n, • Preparing jobs to be released for production. Familiarity with Amada VPSS BLANK 4ie software is a plus.\n, • Creates product assembly work instructions and manufacturing equipment processing instructions.\n, • Maintains a program database and detailed records on all CNC machines (Amada Turret Punch, Laser, Punch/Laser Combo).\n, • Uses engineering drawings to program machinery for engineered items.\n, • Troubleshoots problems with failed products, products, or systems.\n, • Participates in the resolution of quality issues and drive associated improvements.\n, • Identifies and plans manufacturing assembly and test workflow layout.\n, • Works with Quality Manager to ensure and maintain compliance with safety, operational, and regulatory standards of Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety Association (OHSA).\n, • Continuously assesses opportunities for improvement and any needed changes to management systems.\n, • Evaluate manufacturing processes by designing and conducting research programs.\n, • Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors.\n, • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.\n, • Ensures product and process quality by designing testing methods.\n, • Provides manufacturing decision-making information by calculating production, labor, and material costs.\n, • Provides manufacturing engineering information by answering questions and requests.\n, • Maintains product and process database by writing computer programs and entering data.\n, • Completes design and development projects by training and guiding technicians.\n, • Bachelor's degree in Mechanical or Manufacturing Engineering, or 5 to 10 years of manufacturing experience in a related field. \n, • 3 to 5 years of Solidworks or Inventor experience as well as: \n, • CAD and 2D drafting experience. \n, • Machine Code experience. \n, • CNC and Automation experience (Amada AP100US or similar software).\n, • ISO 9001 experience with process documentation and system audits. \n Raycap, Inc. has decades of experience creating products that protect and support the world's most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: \n • A very competitive benefit package\n, • Paid Time Off\n, • 10 company paid holidays\n, • Tuition Reimbursement\n, • A generous 401(k) employer contribution\n\n Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description Design Engineer, Decorative lighting , Bronx, NY Here at HB Architectural Lighting, we manufacture large- and small-scale, custom decorative light fixtures for public spaces, guest rooms, restaurants, places of worship, universities, high-end residences, and more. Based in Bronx, New York, our 30,000 square foot factory is vertically integrated with state-of-the-art, automated, and hand-operated machinery. Our highly skilled team turns conceptual designs into manufacturable products using various manufacturing techniques including CAD drawing, laser cutting, CNC machining, hand-forming metal, welding, polishing, hand finishing, and shade making. The Candidate will be responsible for: • Converting sketches developed by our customers, into a manufacture-able product using AutoCAD and or Solidworks software, • Be able to produce accurate part drawings, Detailed and Bills of Materials in the format established by our company standards, • Work with our Manufacturing team and Project Manager(s) throughout the manufacturing process to ensure the product meets the customer's expectations.

Job Description Join the Future of Medical Aesthetics at Juvly Aesthetics - Aesthetic Injector Position! About Us At Juvly Aesthetics, we provide customized, non-surgical aesthetic treatment plans that enhance our clients natural beauty. Our team is highly trained, well supported, and consistently create optimal aesthetic results for our clients. We are committed to transparent pricing and amazing service. With eleven locations nationwide, Juvly Aesthetics is a leader in the medical aesthetics industry. Why Join Juvly? Working at Juvly is unlike any other medical aesthetics practice. Our team members are clinicians first and receive unparalleled paid-training to perform the best aesthetic procedures in the industry. The environment is exciting, challenging and rich in opportunity. At Juvly, we believe in creating a positive work environment by fostering growth, collaboration and continuous learning. Key Responsibilities • Provide thorough client consultation, education and create individualized aesthetic treatment plans, ensuring that our clients consistently have an exceptional experience and achieve natural, beautiful results., • Perform medical aesthetic procedures as a skilled injector including including Wrinkle Relaxers and Dermal Fillers. Also perform Microneedling (PRP, RF, Standard) Laser Treatment (IPL/BBL), Chemical Peels, Wellness/Weightloss, Body Contouring, and more., • Collaborate with multidisciplinary teams to ensure comprehensive patient care., • When not with clients, support clinic growth by engaging in marketing efforts/client outreach, promote/sell retail products and work on various projects as needed., • Remain current with the latest treatments, training and best practices provided by Juvly Aesthetics., • Stay informed about industry advancements in medical aesthetics. As a dedicated Physician Assistant (PA) or Nurse Practitioner (NP), you possess: • Excellent clinical judgement and attention to detail, with a naturally strong aesthetic eye., • Strong interpersonal skills, assertive/confident approach, enthusiasm and a personable nature., • Experience or strong interest in becoming a proficient aesthetic injector with a variety of injectable treatments., • Knowledgeable on skin care, with the desire to learn more., • Demonstrated skills in sales, customer service and relationship building., • A commitment to delivering exceptional patient care/follow-up care., • Great time-management skills with the ability to prioritize among multiple requests., • Current Physician Assistant (PA) or Nurse Practitioner (NP) License in New York., • Current DEA license for prescriptive authority (or willingness to obtain). We offer an attractive package that rewards excellence: • A competitive base salary, plus performance-based incentives, • Extensive Paid Training, • Medical, Dental and Vision coverage, • Life Insurance, • 401(k) retirement plan, • Paid vacation time and holidays, • Generous staff treatment program, • Friends and family program Full-time, M-F, about 40 hours per week/in-office. Some travel may be required during training. To Apply Please submit your resume, cover letter.

Job Description General Dentist - New York City, NY (New Graduates Welcome!) Financial District Location: New York, NY Job Type: Full-time / Part-time Are you ready to launch your dental career in the heart of the Big Apple? We are seeking a motivated General Dentist (New Grads Welcome!) to join our fast-paced, state-of-the-art dental practice in New York City. Whether you’re a seasoned professional or a recent graduate, we offer mentorship, cutting-edge technology, and a patient-first philosophy to help you succeed! What We Offer: ✅ Competitive salary ($275K-$400K+ potential) $22,500 SIGNING ON BONUS RECEIVED THE DAY OF SIGNING JOB OFFER!!! ✅ Generous commission-based pay with daily guarantees ✅ Flexible scheduling (Full-time or Part-time) ✅ Mentorship from experienced dentists to guide new grads ✅ Fully digital, modern practice with advanced technology (CBCT, iTero, laser dentistry) ✅ High patient volume & strong marketing support ✅ CE allowance, licensing reimbursement & professional growth opportunities ✅ Medical, vision, 401(k), paid malpractice coverage Your Role: • Provide high-quality general dentistry, including restorative, cosmetic, and preventive treatments, • Educate and communicate effectively with patients on their dental health, • Collaborate with a team of experienced dental professionals ✔ DDS/DMD from an accredited dental school ✔ Active New York dental license (or ability to obtain) ✔ Strong clinical skills and a passion for patient care ✔ New graduates are encouraged to apply—mentorship available! Join us and start your career in one of the most vibrant cities in the world!

Job Description Metro Dermatology is looking for enthusiastic, dedicated, bi/multi-lingual, career-minded, and experienced medical assistants to join our dynamic and fast-paced team at our new Glen Oaks location, 257-07 Union Turnpike, Glen Oaks.. Metro Dermatology of NY/NJ is a high-volume and rapidly growing medical and aesthetic dermatology practice, serving diverse communities in the Bronx, Flushing, Elmhurst, and Fort Lee, NJ. All full-time employees are eligible to sign up for the Practice's competitive health, dental, and vision plans after thirty days of start date Responsibilities include: • Assisting providers with procedures and surgeries, phlebotomy, prescriptions, and maintaining efficient patient flow., • Assisting patients with laser and phototherapy treatments, • Communicating with patients, pharmacies, and insurance companies to assist with any questions, prescription inquiries, and prior authorizations., • MUST have an associate's degree or higher, • STRONGLY RECOMMEND that staff be vaccinated against COVID-19, including boosters and new vaccines, • MUST BE BILINGUAL in English and Korean, fluency in other languages is a plus, • MUST be able to work at least one Saturday shift per month (8:45 am to 1 pm), non-negotiable, • MUST be able to start early (7:45 am) or stay late (5 pm), • LPN or RN license helpful Full-time applicants who can commit to at least two years of work preferred. Part-time positions may be available for exceptional candidates. Office hours are 8-5 or 8-6 on weekdays, 9-1 on Saturdays Potential Benefits: • eligible to participate in Practice's health insurance, vision, and dental coverage after thirty days, • ability to join 401(k) plan (traditional or Roth) after meeting plan eligibility requirements, • six paid holidays plus PTO and NYC Safe and Sick Leave