Trabajos lean six sigma en Clifton, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Key Responsibilities: • Skilled in troubleshooting, maintenance, and support for system-level challenges in a production environment. Conduct failure analysis reports and investigations., • Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts., • Collaborate with team members to troubleshoot and resolve assembly issues efficiently., • Proven experience in:, • Designing cables/harnesses. Experience with subcomponents and pricing., • PCB board/electrical enclosures testing and debugging., • Designing and developing fixtures to support production, • BOM structuring for multidisciplinary products, submitting, and managing engineering change orders, • Procedure writing to document assembly instructions production processes., • Proven ability to manage multiple projects simultaneously, maintain project timelines and work independently., • Knowledgeable and experienced in two or more of the following areas:, • PC/server build and configuration, HW setups, BIOS configuration., • Communication protocols like RS232, Ethernet, and ECAT., • Lab equipment: DVM, Megger insulation tester, network analyzer, oscilloscope., • ICT fixture design or knowing how to write requirements for PCB board testing., • PCB layout programs (OrCad, Deep trace, Altium), • Travel Requirements: Up to 10% travel to support customers worldwide. Technical Skills: • Manufacturing Software: SAP ERP, Autodesk AutoCAD, SolidWorks, Catia, OrCAD, AutoCAD, any harness design software, Cirris., • Production Planning Tools: Advanced Planning and Scheduling (APS), MRP II, Kanban systems, Gantt charts., • Data Analysis & Reporting: Microsoft Excel (Advanced), SQL (Intermediate), Power BI (Intermediate), VBA Macros., • Regulatory Compliance: Knowledge or previous exposure to ISO 9001, Six Sigma (Green Belt), Lean Manufacturing principles, OSHA standards, EPA regulations. Preferred Qualifications: Bachelor's or Master's degree in Electrical Engineering. Minimum Qualifications Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years Base Pay Range: $96,000.00 - $163,200.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Job DescriptionAbout Us Odeko is the all-in-one operations and technology partner to more than 20,000 independent coffee shops, cafes and other food establishments. Through the Odeko web portal and mobile app, customers can purchase supplies from hundreds of national and local brands, track ordering trends, finance equipment, and access insurance. Customers that use Odeko can increase their revenue, reduce their environmental footprint, and save significantly on their cost of goods and time spent on vendor management. Odeko is on a mission to continuously develop technology to champion your neighborhood cafes, coffee shops, and other independent F&B establishments. Local coffee shops and cafes are the backbone of any given community, and we're here to help manage the day-to-day tasks with a platform so intuitive, it's kinda like magic. The Odeko team is diverse, passionate, and innovative. Our 400+ employees are spread across numerous departments and business lines, but are single-minded in our mission to develop technology to support the many needs of our customers. We believe that small businesses need support now more than ever, and that Odeko is uniquely positioned to provide that support. We are looking for an Assistant General Manager to join our growing team. This person will be responsible for Operations. In this role you will oversee the full scope of our overnight last-mile delivery operation; you will lead warehouse and driver operations, ensure safety, optimize performance, drive operational efficiency, and maintain our commitment to a 95 %+ delivery success quality rate by owning your workstreams and influencing any upstream or downstream owners. This role is ideal for a leader with deep operational expertise who thrives in fast-paced, high-growth logistics environments and who can drive cross-functional collaboration to deliver outstanding results. How you'll make an impact: • Create and maintain a strong safety culture that eliminates risks from the operation, • Support, coach, and lead a large team of drivers, dispatch, and team leaders, • Demonstrates initiative in all areas of the business. Has a bias for action and a passion for results., • Develops team leaders who can drive results in the business, • Own all operational KPIs for your assigned shift/workstreams, including delivery success rate, safety metrics, labor and productivity, and route efficiency., • Uses process and project management skills to deliver significant and measurable results, • Collaborate with all support teams including Safety, Engineering, Loss Prevention, Quality Assurance, Human Resources to develop plans to meet business objectives, • Partner with leadership on other shifts and workstreams to ensure seamless 24-hour operations., • Able to stand in for the Site General Manager as needed., • Perform all duties as identified by the General Manager and/or other leadership. About you: • 5+ years of experience in operations leadership, with at least 2 years of direct report and performance management experience, • Proven track record of delivering results against safety, compliance, and operational KPIs., • Ability to work a flexible schedule/shift/work area, including weekends, nights, and/or holidays, • A proven capacity to collect and assess complex data, using those insights to formulate, propose, and deploy effective business solutions., • Proficiency in operations management systems, routing software, and productivity tools., • Strong understanding of last-mile delivery logistics, • Preferred:, • Strong financial acumen, with experience managing labor budgets and operational P&L elements., • OSHA, DOT, or other relevant safety certifications., • Lean, Six Sigma, or continuous improvement certifications., • Bilingual (English/Spanish) is a plus., • Ability to work flexibile schedules including weekends and oversee an overnight shift where employees work from 8 PM - 6:30 AM. Compensation for this role is up to $120,000. What you'll love about Odeko: • Fast-paced environment and growth opportunities - plenty of room for you to directly impact the company and enhance your career!, • Competitive compensation, healthcare benefits, and opportunity for equity, • Other great perks - Full lists of benefits available upon request Odeko is proud to be a diverse, equitable, and inclusive employer. We encourage all to apply regardless of educational background, race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Proven minimum 4 years of experience in: * BOM structuring for multidisciplinary products, submitting, and managing engineering change orders * Writing procedures to document assembly instructions and production processes * Experience working with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts. * Support development or replacement of end-of-life/obsolete mechanical parts * Skilled in troubleshooting, maintenance, and support for system-level challenges in a production environment. Conduct failure analysis reports and investigations. * Designing and developing fixtures to support production * 3D CAD modeling and 2D drawing generation * Quotation, prototyping, integration, and testing * Proven ability to manage multiple projects simultaneously, maintain project timelines and work independently. * Travel Requirements: Up to 10% travel inside and outside US Technical Skills: * Manufacturing Software: SAP ERP, Autodesk AutoCAD, SolidWorks, Catia, OrCAD, AutoCAD, any harness design software, Cirris. * Production Planning Tools: Advanced Planning and Scheduling (APS), MRP II, Kanban systems, Gantt charts. * Data Analysis & Reporting: Microsoft Excel (Advanced), SQL (Intermediate), Power BI (Intermediate), VBA Macros. * Regulatory Compliance: Knowledge or previous exposure to ISO 9001, Six Sigma (Green Belt), Lean Manufacturing principles, OSHA standards, EPA regulations. Minimum Qualifications Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years Base Pay Range: $96,000.00 - $163,200.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. QuidelOrtho is seeking a Manager, Data Analytics. The Manager, Data Analytics is a global people leader within QuidelOrtho' s Global Quality & Compliance (GQ&C) organization. This leader is responsible for developing and leading a team of Quality professionals to ensure the design, implementation, and continuous improvement of Quality systems, processes, and programs that enable QuidelOrtho' s Right to Operate and support business agility, innovation, and growth. This role provides strategic direction and operational oversight across Quality disciplines. operate under little to no direct supervision and provide independent guidance to the business. This position is considered a subject matter expert in Quality Data Analytics and Complaint Trending. They are accountable for the work of the Quality Data Analytics team and the success of team projects; and will have significant amounts of critical organizational and technical knowledge. This leader is responsible for the day-to-day management and supervision of Quality Engineers and Data Analysts and is also accountable for developing talent, strengthening scientific and compliance capabilities, and fostering a culture of engagement, collaboration, and performance. By integrating technical expertise, data-driven insights, and agile leadership behaviors, the Manager, Data Analytics ensures that Quality systems and teams deliver sustainable business and compliance outcomes. This position will be Hybrid in any global QuidelOrtho site. * Provides independent guidance to business partners on quality data handling and analytics. Establish dashboards and data visualizations to support product quality and continuous improvement. * Leads metrics and data analytics work for Complaints, Recalls, NC, CAPA, Audits/Compliance and other areas of Quality. * Ability to manage complaint trending activities and related software system validations * Ability to compile and present quality data and analysis to the business eg: Management Review. * Lead, develop, and inspire a team of Quality professionals to achieve organizational and individual performance objectives. * Establishclear priorities, assign responsibilities, and ensure effective resource allocation to meet business and compliance needs. * Provide technical, regulatory, and operational leadership to ensure Quality systemscomply withISO 13485, FDA 21 CFR 820, IVDR, and other applicable requirements. * Drive harmonization and standardization of Quality processes, procedures, and tools across sites and functions to strengthen compliance and efficiency. * Promote a culture of continuous improvement byidentifyingopportunities for simplification, process excellence, and digital enablement within the Quality Management System (QMS). * Ensure the teammaintainsa state ofinspectionreadiness and supports successful engagement with regulatory agencies, notified bodies, and internal audits. * MonitorQuality performance using metrics and data analytics toidentifyrisks, drive root cause analysis, and implement sustainable improvements. * Coach and mentor emerging Quality team members to build organizational capability and ensure robust succession planning. * Communicate Quality and Compliance strategy, progress, and risk mitigation plans to senior leadership and cross-functional stakeholders. * Ability to identify and drive process improvements; own process investigations, nonconformance records or corrective actions in response to audit findings. * Perform other work-related duties as assigned. Required: * Bachelor's degree in Life Sciences, Engineering, or a related technical discipline required. * 7+ years of progressive experience in Quality, Compliance, or related fields within the Medical Device, IVD, or Biopharmaceutical industries, including at least 3 years in people leadership. * Strong understanding of Quality System regulations and standards, including ISO 13485, FDA 21 CFR 820, and IVDR. * Proven ability to lead and develop high-performing teams and build future technical and people leaders * Demonstrated success driving Quality and Compliance initiatives that align with business strategy and regulatory expectations. • Excellent collaboration, influence, and communication skills across functional and organizational boundaries., • Strong analytical and problem-solving skills, with experience using data to drive decision-making and improvement., • Experience leading in a matrixed, global organization and managing competing priorities effectively., • Commitment to scientific integrity, compliance excellence, and continuous improvement. Preferred: * Advanced degree (MS, PhD, MBA, or equivalent) in a relevant discipline. * Experience implementing or optimizing global Quality Management Systems (QMS) and digital tools. * Lean Six Sigma, PMP, or similar certification demonstrating process improvement expertise. * Experience supporting or leading Health Authority or Notified Body inspections. Internal: Operations, Supply Chain, R&D, Commercial, Regulatory Affairs, GSO, Quality & Compliance teams globally and regionally. External: Regulatory agencies, Notified Bodies, Contract manufacturers, Suppliers, and service providers. Typical office or laboratory environment. May involve virtual collaboration across multiple global sites. No strenuous physical activity required. May include occasional travel for site visits, leadership meetings, or regulatory support. At QuidelOrtho, our culture is shaped by four core behaviors that guide how we collaborate, make decisions, and support each other and those we serve. The ideal candidate will exhibit these behaviors, as we believe they're essential to how we thrive as a team and achieve meaningful impact: * Thrive Together - Collaborate intentionally, grow as a team * Make It Happen - Focus on priorities, embrace continuous improvement * Commit to Service - Cultivate a service mindset * Embrace Inclusion - Be open and authentic, welcome diverse perspectives Salary range for this position takes into account a wide range of factors including: education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on that facts and circumstances of each case. Salary range for this position is $135,000 to $175,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time) and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-SP1

Roquette is a family-owned global leader in plant-based ingredients and a leading provider of pharmaceutical excipients. Want to help us make a difference? Using plant-based resources, we collaborate with our customers and partners to imagine and offer ingredients to better feed people and treat patients. Each of our ingredients responds to unique and essential needs, and they enable healthier lifestyles. We are looking for our next Operations Manager within our Operations Team. The Operations Manager will be responsible for providing leadership and direction for the site's technical operations team and driving plant continuous improvement initiatives. The role directs and coordinates all activities of the process and automation engineers and partners with the Manufacturing Technology team and Capital Engineering team to ensure proper prioritization and technical oversight of operations and ensure continuous improvement activities are on track. The Operations Manager is a key member of the Newark site leadership team and supports and establishes a strong safety and productive culture. This position is located in Newark, Delaware. Compensation: The current salary range for this role is estimated to be $146,367 - $176,052. In addition, this position may also be eligible to earn performance-based incentive compensation. The specific compensation offered to a candidate will be influenced by a variety of factors including but not limited to skills, qualifications, experience, and location. What You'll Do: • Serves as proactive member of Management Team by providing technical expertise, continuous improvement leadership, and identifying and acting upon cost saving opportunities;, • Actively participates on the Site Leadership team to set direction and optimize overall site productivity;, • Shows courageous leadership by coaching, asking questions, and intervening when needed., • Challenges status quo and past norms to make the operation more safe and effective:, • Utilize process knowledge to drive performance with technical support teams;, • Interacts with other members of the leadership team, plant staff, and divisional cross-functional groups to optimize plant operations;, • Drive enforcement and continuous improvement of the Roquette Operating System for the site;, • Lead GEMBA program for leaders and managers;, • Ensure effective determination and implementation of operations corrective and preventive actions (CAPA);, • Lead and coordinate sitewide 5S activities;, • Ensure timely and effective execution of operations RCA investigations;, • Lead site efforts for productivity improvement plans and VCP (value creation plan);, • Lead technical team to continuously improve plant OEE;, • Ensure operations department objectives are aligned with site and business direction;, • Improve operations efficiencies and develop and implement best practices;, • Ensure effective daily management of the Operations technical team, which includes technical staff, and resident contractors when applicable;, • Provide technical expertise to analyze and resolve recurring issues that impact plant uptime;, • Implement Lean concepts, improve equipment reliability, operations productivity and optimize overall asset life cycle costs;, • Lead team to provide technical support in order to plan department operations;, • Lead team to provide data needed for bill of materials, yield, OEE, and other key metrics;, • Create, review, manage and share sitewide KPI's;, • Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delay;, • Continuously works to improve the total cost of production (raw material, conversion cost and activity rate, etc.). May take a leadership role in maintaining the budget as delegated by the Site Leader;, • Develops strong partnerships with support functions such as EHS, Maintenance, Supply Chain, and others to drive improvement in the organization and assure alignment;, • Provide operational resources to support investments in projects that improves quality and capability to meet internal and external customer needs and corporate, group, division and site goals;, • Ensures the operation team is fully prepared for immediate response situations, including where technical resources might be needed to analyze process conditions and guide the response;, • Encourage identification and prevention of non-conformance to quality procedures and specifications;, • Ensure that investigations are conducted into any process deviations or non-conformances and develop and implement programs to prevent re-occurrence;, • Understand and anticipate customer needs and implement performance measurements responsive to such needs;, • Communicate continuous improvements in key measurements including on time delivery, product quality and process capability; What You'll Need: Education: • B.S. Degree in Chemical Engineering (highly preferred), Chemistry or related technical discipline or equivalent combination of education and experience., • Experience in food/pharma manufacturing operations preferred., • 5+ years' experience in an industrial setting in a learning, EH&S, Manufacturing, HR, Quality or work process related role preferred;, • Strong analytical, personal computer, organizational and leadership abilities., • Strong communication skills (written, verbal, and listening) and interpersonal skills., • Strong problem-solving ability., • Expert knowledge of process technology and Avicel manufacturing preferred., • Strong project management and communication skills;, • Ability to manage time, balance priorities, and manage conflict;, • Good analytical skills with demonstrated ability to consistently solve problems in a decisive and efficient manner;, • Computer skills (word processing, spreadsheets, graphics & database);, • Good working knowledge and understanding of Enterprise Resource Planning (ERP) systems with working knowledge of SAP highly desirable;, • Lean Six Sigma experience a plus;, • Experience in heavy industrial or chemical technical applications;, • Experience managing in a Union environment a plus;, • MBA helpful but not required. Work Environment • This is a full-time on-site position. Days and flexible hours of work are required to meet facility demands. AAP/EEO Statement Roquette is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. "AAP, EEO, Drug-Free Workplace" Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you identify yourself in this position, please apply byuploading your resume and let's start the journey together! Roquette is proud to be a global company where you can find personal and professional growth through multiple diverse experiences. Roquette strives to create a dynamic workforce while remaining firmly committed to equal opportunity by complying with EEO laws. As we continue to grow, Roquette understands that to be successful we must always be inclusive in our approach. To find out more about our products, values and sustainable development ambitions visit us at ___ and at ___

Roquette is a family-owned global leader in plant-based ingredients and a leading provider of pharmaceutical excipients. Want to help us make a difference? Using plant-based resources, we collaborate with our customers and partners to imagine and offer ingredients to better feed people and treat patients. Each of our ingredients responds to unique and essential needs, and they enable healthier lifestyles. We are looking for our next Process Engineer II or III within our Operations Team. The Process Engineer will be responsible for supporting day-to-day support of production processes and developing and implementing improvements to existing processes and products in order to meet corporate and customer standards. This position is located in Newark, Delaware. Compensation: The current salary range for this role is estimated to be $85,000 - $125,000. In addition, this position will be eligible to earn performance-based incentive compensation. The specific compensation offered to a candidate will be influenced by a variety of factors including but not limited to skills, qualifications, experience, and location. What You'll Do: • Serve as the SME and own one or two MCC or non-MCC processing lines, with ability to provide basic or full level support on other lines., • Provide full support and lead or assist in troubleshooting of packaging systems., • Troubleshoot process problems in operations., • Identify and develop process changes and modifications to enhance operating reliability and product quality and to improve efficiencies of key resources., • Identify and develop control mechanisms to improve reliability and efficiency of plant operations., • Understand and track key performance indicators for the manufacturing process, including process yields, rates, etc., • Develop engineering solutions for chronic and sporadic process problems and collaborate with technical, operations, and maintenance to implement solutions., • Identify continuous improvement opportunities and lead implementation of continuous improvement projects., • Undertake cross-training activities to gain understanding of all the processes., • Commission installations in a timely and effective manner., • Write operating procedures and train operators on start-ups and integration of new systems., • Monitor environmental regulations and performance against such as it pertains to project areas., • Independently lead in Root Cause Failure Analysis (RCFA) pertaining to deviations, incident investigations, complaints, etc., • Participate in hazardous operations reviews and project safety reviews and support the plant's safety, health & wellness environmental and industrial hygiene programs. Initiate and drive and execute process changes, new processes and equipment, etc., • Adhere to all GMP standards, specifically regarding documentation., • Operating Services Agreement Activities (Services provided 3rd party owner of one production line), • Coordinate operations activities between Roquette and third-party owner, • Maintain communications for operations issues, changes, etc. between Roquette and third-party owner, • Facilitate process improvements for third-party process and assets, • Provide technical support for third-party process, • Provide daily technical oversight and guidance for colloidal manufacturing process, • Proactively network with other Engineering technical disciplines (e.g., Consultants for Materials, Engineering Mechanics, Instruments & Process Controls, Electrical and Energy), plant and business personnel, and suppliers and contractors to improve process reliability, quality, and safety., • Train peers on relevant operational engineering topics. What You'll Need: Education: • 3-8+ years of experience in manufacturing operations, or equivalent experience., • Experience in food/pharma manufacturing operations preferred., • Excellent computer aptitude, communication and interpersonal skills., • Self-directed and self-motivated., • Solid written and oral communication skills., • Ability to work as a team member in a respectful manner in a diverse work environment., • Strong analytical skills with demonstrated ability to consistently solve problems in a decisive and efficient manner., • Demonstrates understanding of statistical analysis to be used for process improvement., • Demonstrates ability to lead root cause analyses and implement corrective actions to prevent recurrence., • Demonstrates understanding of quality control procedures,, • Demonstrates expertise in processing equipment and plant utilities, or equivalent experience at a manufacturing plant., • Interpersonal skills for working in teams across functions., • Experience using and understanding of Enterprise Resource Planning (ERP) and software systems such as SAP, FMEA+, database/SQL infrastructures, and document control a plus., • Travel, some internationally, may be required when collaborating with other manufacturing facilities, for training, etc. AAP/EEO Statement Roquette is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. "AAP, EEO, Drug-Free Workplace" Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you identify yourself in this position, please apply byuploading your resume and let's start the journey together! Roquette is proud to be a global company where you can find personal and professional growth through multiple diverse experiences. Roquette strives to create a dynamic workforce while remaining firmly committed to equal opportunity by complying with EEO laws. As we continue to grow, Roquette understands that to be successful we must always be inclusive in our approach. To find out more about our products, values and sustainable development ambitions visit us at ___ and at ___

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview As a Sr. Quality Engineer specializing in Quality Operations, you will be responsible for overseeing and improving the quality of manufacturing processes, ensuring compliance with regulatory requirements, and driving continuous improvement initiatives to enhance product quality and customer satisfaction. You will play a key role in ensuring that our manufacturing operations meet the highest standards of quality and efficiency while adhering to relevant regulations and industry best practices. Job Responsibilities and Essential Duties • Develop, implement, and maintain quality control processes and procedures for manufacturing operations to ensure compliance with regulatory requirements and industry standards., • Establish and monitor key performance indicators (KPIs) to assess manufacturing quality and identify opportunities for improvement., • Participate/ Lead validation and verification activities for manufacturing processes, equipment, and software systems to ensure they meet quality and regulatory requirements., • Develop/ review validation protocols, execute validation studies, and analyze data to ensure process robustness and reliability., • Ensures through Design Transfer activities the Device Master Records (DMRs) contents are developed, controlled, and maintained leading to Risk based Manufacturing Control Plans., • Support/ Investigate and resolve Out of Tolerance events identified during equipment/ instrument calibrations., • Investigate product nonconformances, conduct root cause analysis, and implement corrective and preventive actions (CAPA)., • Track and monitor CAPA effectiveness to ensure issues are resolved and prevented., • Support the Health and Hazard Evaluation process by gathering required data and performing in-depth analysis prior to sharing the information with the Field Action Committee., • Implement corrective and preventive actions (CAPAs) to address root causes and prevent recurrence of quality issues., • Facilitate risk management activities related to manufacturing processes, identifying, and mitigating risks to product quality, safety, and efficacy., • Implement risk-based decision-making processes to prioritize quality activities and allocate resources effectively., • Lead and support continuous improvement projects aimed at enhancing manufacturing processes, reducing defects, and optimizing productivity., • Utilize quality tools and methodologies, such as Six Sigma, Lean Manufacturing, and Statistical Process Control (SPC), to drive process optimization and waste reduction., • Ensure compliance with applicable regulations, including FDA Quality System Regulation (QSR), ISO 13485, and other international standards., • Support both internal and external audits as an SME for Production & Process Controls and presents records of activities related to Design Transfer for New Product Development and Design Changes., • Provide mentorship and guidance to new Engineers/Interns within the organization. Minimum Requirements • Bachelor's degree in engineering, Science, or other related field is required. ASQ, CQE, Six Sigma Green Belt or other applicable certifications are a plus., • A minimum of 7 years' experience in Quality or Engineering., • Experience in a medical device or pharmaceutical industry., • Experience with Class III disposable and/or Electro-Mechanical medical devices is preferred., • Knowledge and understanding of the US Food and Drug Administration (FDA) 21 CFR 820, ISO 13485, ISO 14971, EU MDD, and EU MDR. Knowledgeable on specific requirements for Design Controls and Risk Management is preferred. Required Knowledge, Skills, and Abilities • Knowledge of application & selection of Sampling Plans, to support Risk based Manufacturing Controls Plans., • Project management and leadership experience is desirable., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Proficiency in quality tools and methodologies (e.g., Six Sigma, FMEA, Gage R&R)., • Ability to work effectively in a cross-functional team environment., • Ability to review and understand technical standards and their requirements for products., • Proficiency in Microsoft Office Products such as Word, Excel, or equivalent software applications. Salary range: $115k - $120k plus 10% annual bonus #LI-LG1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview • This position provides technical leadership in the development, optimization and sustaining of manufacturing processes for medical devices in accordance with Getinge's Quality system and regulatory requirements (ISO 13485 and FDA 21 CRF Part 820)., • This individual is a key resource during Design for Manufacturability (DFM), collaborating closely with cross-functional teams to ensure current and new products are scalable, robust, cost-effective, and production-ready., • Leadership cross-functional initiatives, drive strategic improvements, oversee process validations, implement continuous improvement strategies, and support commercial-scale operations. Job Responsibilities and Essential Duties Design for Manufacturability (DFM), Design For Six Sigma (DFSS) & Product Development • Establish and standardize DFM and DFSS best practices, templates, and guidelines across engineering teams., • Lead early design phases to influence product architecture, material selection to ensure scalability, robust manufacturability, and cost-optimized solutions, • Drive Design for Six Sigma methodologies (DMADV/IDOV) during product development to ensure critical-to-quality (CTQ) requirements are met., • Integrate Design for Cost (DFC) principles into product and process development, ensuring costeffective material choices, processes, and tooling strategies., • Provide technical leadership in DFM reviews, tolerance analyses, design risk assessments, and capability studies., • Translate product requirements into manufacturing specifications, tooling designs, and process control strategies., • Develop and optimize manufacturing processes including molding, machining, laser processing, automated assembly, packaging, and/or sterilization workflows., • Lead large scale process validations (IQ/OQ/PQ), process characterization efforts, and statistical justification aligned with regulatory expectations., • Establish longterm process capability targets, implement control strategies, and ensure audit readiness., • Serve as the technical escalation point for complex manufacturing challenges, driving root-cause investigations and high-impact CAPAs to closure., • Lead yield improvement initiatives, cost-reduction programs, and process harmonization across multiple product families., • Partner with Operations and Quality to enhance throughput, reduce scrap, optimize workflow, and expand manufacturing capacity., • Act as the primary technical interface in a cross-functional team as a Core Team member, • Lead technical discussions with suppliers on component manufacturability, material selection, tooling design, and qualification of new technologies., • Apply Design for Cost and Lean principles to reduce waste, optimize workflow, and lower overall cost of goods., • Master's (Preferred) or Bachelor's degree in Industrial, Mechanical, Manufacturing Systems, Biomedical Engineering, Biomedical Engineering, or related technical field with 6+ years of experience., • Demonstrated expertise in Design for Manufacturability (DFM) principles and tools., • Hands-on experience with process validation (IQ/OQ/PQ), risk management (FMEA), and statistical analysis., • Proficiency with CAD tools (SolidWorks, Creo), GD&T, and tolerancing methods., • Strong problem-solving skills with familiarity in DOE, SPC, and root-cause methodologies., • Experience with automated assembly systems, robotics, or high-volume manufacturing., • Knowledge of polymer processing, metal fabrication, laser welding or additive manufacturing., • Experience in Audit Readiness and Internal/External Audits with the various Regulatory bodies (FDA, TGA, PMDA, etc.), • Ability to communicate within the discipline and with others who are not technically trained #LI-MV1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job DescriptionSalary: $80K-$85K Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 groceries, mass, club and convenience stores nationally. The Companys broad product portfolio, born as Mama Mancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit. TheProduction Managerwill oversee day-to-day operations of the manufacturing plant andbe responsible formanaging production schedules, ensuring Grandma Quality and safety standards are met,optimizingworkflows, and leading a team to meet production targets efficiently and cost-effectively. This role requires strong leadership skills to promote our culture of values: Commit to Craftsmanship, Nurture Relationships, and Honor Heritage. Candidates shoulddemonstratea commitment to taking pride in their work, innovating within tradition, and fostering an inclusive and supportive team environment. Strong organizational and problem-solving skills, along with a deep understanding of food production processes and regulatory requirements, are also necessary. Key Responsibilities: • Plan, coordinate, and control manufacturing processes to meet daily, weekly, and monthly production targets. Maintain an unwavering commitment to Grandma Quality while seeking innovative solutions that respect our time-honored methods., • Supervise and motivate production staff, including supervisors, operators, and line workers. Foster an inclusive, respectful, and collaborative environment that values each team members contributions. Promote a culture of accountability, safety, craftsmanship, and continuous improvement. Align labor with volume requirements and throughput goals to ensure sustainable practices., • Develop and implement training programs to ensure team members areproperly trained/cross-trained on production procedures, safety protocols, equipment operation, and Grandma Quality standards. Encourage individual growth and learning, while celebrating team and individual achievements and milestones., • Ensure all products meet established Grandma Quality standards andcomply withfood safety regulations (e.g., FDA, USDA, HACCP, GMP). Take pride in delivering excellence that reflects our heritage and earns the trust of our consumers., • Develop andmaintainproductionand staffingschedules and resource plans to ensure efficiency in throughput and labor costs. Lead post-shift huddles to confirm schedule attainment, analyze shortfalls, document root causes, and support an open exchange of ideas for continuous learning., • Coordinate with procurement and warehouse teams to ensure raw materials and packaging supplies are available as needed. Track inventory levels forinfrequentlyrun items. Respect our partnerships with suppliers by fostering clear communication and collaboration., • Identifyopportunities to improve processes, reduce waste, and increase efficiency through lean manufacturing principles. Encourage team input to innovate within tradition and honor the craftsmanship behind every improvement., • Enforce strict adherence to safety protocols and lead initiatives to improve workplace safety and reduce incidents. Cultivate a safe and inclusive environment where everyone feels valued and protected., • Prepare and present production reports, performance metrics, and operational KPIs to senior management. Issue production status updates; flag delays caused by machinery, staffing, or materials. Use data to celebrate wins,identifygrowth areas, and inform sound decision-making., • Manage andmonitoremployee hours/overtime using ADP via the time clock system. Maintain fair and transparent practices that support employee well-being and work-life balance while ensuring operational efficiency. Qualifications: • Bachelor's degree in food science, Engineering, Operations Management, or related field; or equivalent experience., • 5+ years of production or operations management experience in a food manufacturing environment., • Strong knowledge of food safety standards, HACCP, GMP, and other relevant regulatory requirements., • Proven leadership skills with experience managing teams in a manufacturing setting., • Excellent organizational, analytical, and problem-solving abilities., • Proficient with manufacturing software (NetSuite preferred), Microsoft Office Suite, and production planning tools. Preferred Qualifications: • Lean Six Sigma certification or experience with lean manufacturing techniques., • Bilingual in English and Spanish Work Environment &EssentialPhysical Requirements: • Stand/walk for extended periods of time, • Wearappropriate protective/sanitaryclothing/equipment, • Maintain manual dexterity, • Operate various manual and electric kitchen equipment, • Reach, • Lift/carry up to 60 pounds, • Be exposed to extreme hot/cold temperatures

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations – manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI’s are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements – takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information • Leadership skills:, • Strong communication with subordinates, peers and management., • Ability to motivate others, • Ability to train and delegate other, • Effectively provide feedback to reports and peers, • Be accountable for the performance of the team’s metrics and its members’ behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving – analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionDescription: We are actively seeking a dynamic and strategically minded Director of Operations to oversee our metal stamping and precision machining facility. In this pivotal leadership role, you will be responsible for not only driving operational excellence but also developing comprehensive strategies to ensure the highest quality standards, optimize production processes, and significantly enhance operational efficiency across all manufacturing operations. Requirements: Essential Functions: • To accomplish this job successfully, an individual must be able to perform satisfactorily, with or without reasonable accommodation each stated essential function. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions., • Develop and execute long-term operational strategies that align with company goals and promote sustainable growth within the deep drawn metal stamping sector. This includes analyzing market trends and competitor strategies to identify opportunities for expansion and innovation., • Lead the overall management of manufacturing operations, which encompasses production planning, quality control, supply chain management, and workforce development. Ensure efficient utilization of resources and materials to meet production goals effectively., • Establish and continuously monitor key performance indicators (KPIs) to evaluate production efficiency and product quality. Utilize advanced data analytics tools to make informed, data-driven decisions that enhance operational performance and drive improvements in production yields and quality compliance., • Collaborate with senior management and cross-functional teams to spearhead continuous improvement initiatives, such as implementing lean manufacturing practices, Six Sigma methodologies, and other process optimization strategies to streamline operations and reduce waste., • Ensure strict compliance with industry regulations, safety standards, and quality assurance protocols. Foster a culture of safety and accountability by conducting regular safety audits and promoting best practices., • Mentor and empower the leadership team within manufacturing, providing them with the tools and resources needed to take ownership of their departments. Facilitate leadership development programs and training to enhance team skills and foster career growth among employees., • Oversee the preparation and management of operational budgets, effectively allocating resources to maximize productivity while maintaining cost-effective operations. Regularly review financial performance and implement corrective actions as necessary., • Communication – Ability to effectively communicate with others verbally and in writing., • Time Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Technical Aptitude – Ability to comprehend complex technical and specialized information., • Applied Learning – Ability to participate in needed learning activities in a way that makes the most of the learning experience., • Accountability – Ability to accept responsibility and account for his/her actions., • Analytical Aptitude – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Initiative – Ability to stay motivated, ambitious, and curious without the help of others., • Bachelor’s degree in Engineering, Manufacturing Management, or a related field; a Master’s degree is highly preferred., • A minimum of 7-10 years of progressively responsible experience in manufacturing operations, specifically in metal stamping, precision machining, or a closely related field, with a strong understanding of the complexities involved., • Proven leadership abilities with a track record of creating and sustaining high-performing teams, driving operational improvements, and managing large-scale manufacturing projects., • In-depth knowledge of manufacturing processes, quality management systems, and lean manufacturing methodologies that drive operational efficiency. This position will primarily operate in an office setting, with regular visits to the manufacturing floor to supervise operations and ensure alignment with strategic goals. Occasional travel may be required for client meetings, industry events, and inter-company collaboration.

Job Description Mission The Quality Engineer plays a critical hands-on role in ensuring PTI Tech delivers precise, reliable components that meet the demanding standards of aerospace, defense, and other high-reliability industries. This position combines inspection, metrology, and engineering analysis to ensure products meet specifications while continuously improving manufacturing processes. The role begins with strong involvement in inspection and measurement systems while developing engineering capabilities in statistical analysis, root cause problem solving, and process validation. Over time, the engineer will grow into advanced metrology programming and quality engineering leadership responsibilities. This position is ideal for a motivated early-career engineer who is passionate about manufacturing, highly detail-oriented, and eager to learn measurement technology, data analysis, and structured problem solving. Competencies – What This Person Must Be Hands-On Inspector & Measurement Specialist - Develop strong capability in dimensional inspection using calipers, micrometers, optical systems, and coordinate measuring equipment. Interpret engineering drawings and GD&T to verify product conformance. Developing Metrology Programmer - Learn and progressively support programming and operation of advanced measurement systems including CMM, optical vision systems, and automated inspection equipment. Calibration & Measurement System Steward - Support the management of the calibration system to ensure all gages, instruments, and fixtures remain accurate, traceable, and compliant with AS9100 and customer requirements. Data-Driven Problem Solver - Use structured methods such as 8D, 5 Whys, and Ishikawa analysis to investigate defects and identify sustainable corrective actions. Process Control Advocate - Support statistical process control, capability analysis, PFMEA, control plans, and Gage R&R studies to strengthen measurement reliability and process stability. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Standards-Focused - Apply AS9100, ISO 9001, and customer quality requirements in daily operations, documentation, and investigations. Sense of Ownership & Urgency - Demonstrate initiative, accountability, and responsiveness when addressing quality issues affecting production or customers. Cross-Functional Collaborator - Work closely with manufacturing, engineering, and production teams to ensure requirements are clearly understood and processes remain capable. Key Responsibilities Inspection & Measurement • Perform dimensional inspection of components using manual tools, optical systems, and automated measurement equipment., • Interpret engineering drawings, tolerances, and GD&T to verify product conformance., • Support and progressively learn CMM, OGP, and Keyence inspection systems., • Assist in the development and refinement of inspection methods and inspection fixtures., • Document inspection results and maintain accurate inspection records. Quality Engineering Support • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Support Gage R&R studies and measurement system evaluations., • Participate in root cause investigations for internal and customer quality issues., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Assist with First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145), and validation activities., • Analyze scrap, defect, and process data to identify trends and improvement opportunities. Calibration & Measurement Systems • Support the management of the calibration system to ensure all gages and measurement equipment remain compliant and traceable., • Maintain calibration records and coordinate calibration activities with external vendors., • Assist in investigations when measurement equipment is found to be out of tolerance., • Ensure measurement systems remain reliable and capable of supporting production requirements. Key Metrics & KPI’s • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • 100% on-time completion of assigned inspections., • 100% On-Time Calibration Compliance, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • ≥ 95% Documentation Accuracy Rate Required Experience and Qualifications (Subject to Management Discretion) • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • Strong interest in manufacturing, metrology, and quality systems., • Ability to read and interpret engineering drawings and strong GD&T., • Strong analytical and problem-solving skills., • Strong written and verbal communication skills., • Proficiency in Microsoft Excel and basic data analysis. Preferred Qualifications • ASQ Certified Quality Engineer (CQE) or other ASQ or Six Sigma certification, • Hands-on inspection experience including CMM, optical, or non-contact methods, • Experience with CMM programming & operation (Zeiss – Calypso strongly preferred), • Experience in defense, aerospace, or medical device industries Physical Requirements • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipmentCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\n\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Continuous Improvement Leader Location: Carlstadt, NJ 07072 (On-site) Job Type: Full-time Pay: Up to $42/hour Position Overview The Continuous Improvement Leader will drive operational excellence by identifying, developing, and executing improvement opportunities across all manufacturing operations. This is a hands-on role requiring strong shop-floor presence and close partnership with production teams, supervisors, and leadership. The ideal candidate brings deep Lean expertise, a collaborative mindset, and a passion for eliminating waste and improving quality, efficiency, and safety. Key Responsibilities • Lead, facilitate, and manage continuous improvement initiatives using Lean, Kaizen, and other CI methodologies., • Partner with department leaders to develop and implement process improvements that enhance productivity, reduce costs, and improve quality., • Conduct detailed shop-floor assessments, time studies, workflow mapping, and root cause analyses to identify bottlenecks and improvement opportunities., • Train, coach, and support employees in Lean tools such as 5S, value stream mapping, standard work, visual management, and problem-solving frameworks., • Track, analyze, and communicate progress against key performance indicators to ensure sustainable results and accountability., • Foster a culture of continuous learning, teamwork, and operational discipline across all shifts and departments., • Support the integration of new technologies, machinery, and systems that improve operational efficiency and safety. Qualifications, • Bachelor's degree in Engineering, Manufacturing, or related field (or equivalent experience) ., • Minimum 3 years of experience in Lean manufacturing or process improvement, preferably in a metal fabrication or industrial manufacturing environment., • Strong proficiency in Lean tools, Six Sigma principles, and continuous improvement methodologies., • Demonstrated success leading cross-functional improvement initiatives with measurable impact., • Excellent communication, facilitation, and analytical skills., • Practical, hands-on approach with the ability to influence and drive change in production settings. Pay Details: $35.00 to $45.00 per hour Search managed by: Ellen Slovikowsky Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionBenefits: • 401(k), • Health insurance Position Summary: A well-established precision manufacturer in the aerospace and defense sector is seeking a Director of Quality to lead its quality management systems across casting, machining, and assembly operations. This leadership role is critical to ensuring compliance with industry regulations, driving continuous improvement, and maintaining the highest standards of quality in production. Key Responsibilities: • Develop, implement, and maintain a robust Quality Management System (QMS) aligned with AS9100, ISO 9001, and Nadcap standards., • Lead internal and external audits, customer quality interactions, and regulatory compliance initiatives., • Oversee dimensional and metallurgical inspection processes, including CMM, GD&T, and non-destructive testing., • Drive root cause analysis and implement corrective and preventive actions (RCCM, 8D, CAPA)., • Manage all First Article Inspection (FAI) and PPAP/APQP activities, including documentation under AS9012 and AS13002., • Collaborate with cross-functional teams (engineering, operations, supply chain) to improve process capability and product quality., • Analyze quality KPIs and initiate continuous improvement programs to reduce scrap, rework, and customer complaints., • Mentor and develop a high-performing team of quality engineers, inspectors, and technicians., • Role is on-site and not eligible for remote work.Qualifications:, • Bachelors degree in Engineering or a related technical field required; advanced degree a plus., • Minimum of 10 years of progressive quality leadership experience in aerospace, defense, or high-precision manufacturing., • Extensive knowledge of quality standards and regulatory frameworks: AS9100, ISO 9001, Nadcap, ITAR., • Experience managing audits and customer approvals (e.g., Boeing, Lockheed, Raytheon, Honeywell)., • Strong background in metrology, GD&T, and non-destructive testing., • Familiar with lean manufacturing, Six Sigma methodologies, and ERP systems.

Job DescriptionDirector of Quality - Manufacturing Director of Quality Position Overview We are seeking an experienced Director of Quality to lead and advance our quality organization in a fast-paced manufacturing environment. The Director will develop and maintain a robust quality management system, ensure compliance with regulatory and customer requirements, drive continuous improvement, and partner with manufacturing, engineering, procurement, and leadership to deliver high-quality products on schedule. This role combines strategic leadership with hands-on problem solving to sustain product integrity, improve process capability, and enhance customer satisfaction. Key Responsibilities • Define and implement the company quality strategy and roadmap aligned with business objectives and manufacturing priorities., • Lead, mentor, and grow the quality organization including quality engineers, inspectors, and system administrators., • Develop, document, maintain, and continuously improve the Quality Management System (QMS) to meet internal, customer, and regulatory requirements., • Ensure compliance with applicable standards and regulations (e.g., AS9100, ITAR, NADCAP where applicable) and manage external and internal audits., • Oversee supplier quality management program including qualification, performance monitoring, corrective actions, and supplier development., • Direct root cause analysis and corrective/preventive action (CAPA) activities for product and process nonconformances., • Establish, monitor, and report on key quality metrics (e.g., PPM, DPMO, OTD related to quality) and use data to drive decisions and continuous improvement., • Drive process capability and reliability initiatives using Lean and Six Sigma methodologies to reduce variation, waste, and costs., • Manage metrology and inspection capability requirements, including calibration, measurement systems analysis (MSA), and laboratory controls., • Coordinate cross-functional problem solving with engineering, production, procurement, and program management to resolve quality risks and support new product introductions., • Represent the company to customers, auditors, and regulatory authorities on quality matters; lead customer quality reviews and resolve escalations., • Develop and manage quality department budget, staffing, training, and performance objectives.Qualifications, • Required: Proven experience in Manufacturing and Quality Management with a minimum of 10 years in progressively responsible quality roles within a manufacturing environment., • Required: Demonstrated leadership experience managing cross-functional quality teams and programs at a senior level., • Required: Strong knowledge of quality systems, auditing, CAPA, FMEA, control plans, and measurement system analysis., • Required: Excellent problem-solving skills with experience leading root cause analysis and corrective actions., • Required: Experience working with suppliers and managing supplier quality performance., • Education: Bachelors degree in Engineering, Manufacturing, Quality, or related technical field; advanced degree preferred., • Nice to have: Experience in Aerospace or Defense industries and familiarity with industry-specific requirements., • Nice to have: Hands-on knowledge of AS9100 implementation and surveillance audits., • Nice to have: Familiarity with ITAR compliance and export control considerations., • Nice to have: NADCAP experience or auditor familiarity for special processes., • Nice to have: Strong metrology background, including calibration and MSA experience., • Nice to have: Practical experience with Lean manufacturing and Six Sigma (Black Belt or Green Belt preferred)., • Health, dental, and vision insurance, • 401k with company match, • Paid time off, • Paid holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/02/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionSalary: $165,000-$185,000 Mamas Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Companys broad product portfolio, born as MamaMancinis, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit . We have an excellent opportunity for a highly skilled and experienced leader to serve as the Senior Director, Plant Operations of our East Rutherford facility. You will be the senior site leader responsible for the overall performance, safety, Grandma Quality, controls, culture, and financial results of the manufacturing facility. This role serves as the plants general manager, accountable for translating enterprise strategy into consistent, disciplined execution with excellence at the site level. The Senior Director leads through people, systems, and standards, ensuring production, FSQA, maintenance, warehousing, and workforce leadership operate in alignment with Grandma Quality. This role balances results with responsibility, honoring Mamas heritage while building scalable, sustainable operations. Key Responsibilities • Own end-to-end plant performance, including safety, food safety, quality, service, cost, labor efficiency, and employee engagement., • Own overall plant efficiency and throughput performance, ensuring production capacity, labor models, and operating practices support enterprise targets., • Drive improvement in throughput, yield, and line performance by setting expectations, removing barriers, and holding leaders accountable for results., • Serve as the strategic leader for the site, translating enterprise priorities into clear site-level strategies, initiatives, and execution plans., • Partner with the Senior Manager, Production Operations to ensure production schedules and execution plans support optimal efficiency and service outcomes., • Own the plant operating budget, including labor, overtime, supplies, and controllable costs; ensure performance aligns with financial targets., • Balance cost discipline with Mamas commitment to Grandma Quality, safety, and employee well-being., • Use KPIs and financial data to evaluate performance, prioritize investments, and guide decision-making., • Partner with OpEx/CI to identify and sponsor continuous improvement initiatives that deliver measurable, sustainable gains in efficiency, throughput, and cost performance., • Ensure efficiency gains and cost improvements are sustainable and embedded into standard work and leadership routines., • Lead, coach, and hold accountable all direct reports, site functional leaders, and the downline., • Serve as the primary owner of plant culture, reinforcing values-based leadership, respectful supervision, and consistent accountability., • Ensure site execution aligns with enterprise standards of excellence and Grandma Quality while addressing location-specific risks and opportunities., • Partner with FSQA leadership to maintain strong food safety culture, regulatory compliance, and audit readiness., • Own site-level labor strategy, workforce planning, and performance management in partnership with People Operations., • Drive operational discipline through KPIs, operating practices, and structured problem-solving., • Partner with Reliability & Asset Management to support uptime, preventive maintenance execution, and capital improvements., • Support capital projects, expansions, and equipment installations at the site level., • Participate in operational diligence and integration activities related to acquisitions or expansions impacting the facility., • Serve as the primary escalation point for site risks, performance gaps, and employee relations matters., • Build strong cross-functional relationships that nurture trust, accountability, and pride in workmanship., • Collaborate closely with Senior Directors and plant leaders at other facilities to share best practices, standardize where appropriate, and drive enterprise-wide operational improvement., • Participate in cross-facility working groups, initiatives, and problem-solving efforts to strengthen consistency, performance, and scalability across the enterprise., • Champion collaboration between facilities while respecting site-specific strengths, constraints, and heritage., • Other related tasks, as necessary to drive results and support the business. Qualifications • Bachelors degree in Operations Management, Engineering, Business, or related field; or equivalent experience., • 15+ years of progressive leadership experience in manufacturing operations, preferably in food manufacturing or regulated environments., • 10+ years of experience leading multi-shift operations and managing leaders (managers/supervisors)., • Demonstrated experience owning site KPIs, budgets, labor planning, and operational performance improvement., • Expert usage of ERP systems. NetSuite preferred., • Strong working knowledge of food safety/regulatory environments (USDA/FDA), HACCP, GMPs, and audit readiness expectations., • Proven ability to lead through change while maintaining operational stability and culture., • Strong communication, planning, and cross-functional leadership skills., • Lean/Six Sigma knowledge/certification, preferred., • Bilingual (English/Spanish) highly preferred. Essential Physical Requirements • Ability to regularly walk, stand, and move throughout the manufacturing facility., • Ability to navigate stairs, catwalks, and uneven surfaces safely., • Ability to visually and audibly observe operations and employee practices., • Ability to wear required PPE (hair/beard nets, safety shoes, gloves, safety glasses, hearing protection)., • Ability to work in varying environmental conditions (heat, cold, noise, humidity)., • Ability to sit for extended periods while performing administrative work., • Ability to travel locally as required., • Ability to communicate clearly and effectively. We offer a comprehensive compensation package that includes a base salary (to $185k,) plus bonus eligibility, paid time off, holiday pay, medical, dental, vision, and life insurances, FSA, EAP, and 401(k.)

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job Description Job Overview This position is responsible for making sure that engineering and manufacturing processes are performed correctly using the right tools, materials and processes. This includes ensuring that employees are trained to the right quality standard and that all safety requirements are met throughout the production process and facilities. This is a ‘hands-on’ position that requires solid understanding of manufacturing process, and excellent communication and interpersonal skills when working with production assemblers, soldering specialists, and test technicians. Primary Job Responsibilities • Monitor and maintain Raycap quality processes to assure continual 100% customer satisfaction, • Inspect and test various parts of manufacturing including products, components, processes, and comparing against predefined standards, • Provide quality tools, methods, and data to assure ongoing defect-free quality both internally and at the supplier level, • Analyze problems reported and develop improvements to overcome them, • RMA Analysis and NCR resolution internal and external, • Statistical analysis of manufacturing data and creation of reports for senior staff members based on quality documentation, • Maintain and improve the processes for Quality Management (QMS), Environmental Management (EMS), Telecom Quality Management System (TL9000) and Occupational Health & Safety (OSHA) which includes process auditing, OFI’s implementation, Quality Systems Review and documentation writing or editing, • Serve as manufacturing focal point for intelligent analysis of quality issues, determining true root cause and permanent corrective and preventive actions, • Partner with Supply Chain Management to develop high level suppliers of COTS or custom materials, • B.S. degree required in mechanical, electrical, industrial, or manufacturing engineering, • 5 - 10 years’ experience in a technical field with significant hands-on quality and manufacturing experience, • Effective quality analysis, data analysis, problem-solving, and strategic thinking ability, • Expert knowledge and application of DFx, FMEA and other quality tools, • Ability to effectively collaborate across functions within Raycap, • Effective project management skills that facilitate planning complex projects and the timely completion of project deliverables, • Six-sigma, CQE, CQM, CRE, Lean, or other certifications are desirable, • Proficiency in SAP is desirable., • Ability to use MS Office and statistical packages preferred, • High attention to detail and logical problem-solving skills, • The employee is frequently required to stand; use hands to handle or feel objects, tools, keyboards, or controls; reach with hands and arms; and talk or hear, • Occasionally required to walk, sit, and may also be required to stoop, kneel, crouch, or crawl, • Must occasionally lift and/or move up to 50 pounds, • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus, • Prolonged periods of sitting at a desk and working at a computer Why Choose Us? Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-Verify for all employment verifications. Drug-free workplace.

Job Description Summary of Position : The Director of Field Services is responsible for the strategic, financial, and operational leadership of all field operations within the assigned region. This role ensures the delivery of high‑quality service that meets customer expectations, contractual obligations, and corporate objectives. The Director oversees all field personnel and assets, drives operational excellence through the use of automation and technology, and develops a high‑performing team aligned with company goals. This position also carries full P&L responsibility for Field Services, including budgeting, forecasting, financial performance management, cost optimization, and revenue contribution associated with service delivery operations. The Director acts as a key business leader—collaborating cross‑functionally, supporting sales and account management efforts, and driving strategic initiatives to support growth, scalability, and customer satisfaction. Essential Functions: • Operational Leadership : • Provide day‑to‑day leadership of all field operations to ensure customer commitments, SLA compliance, and value‑added service delivery., • Utilize tools for scheduling, dispatch, monitoring, reporting, and performance analytics to maximize workforce efficiency and productivity., • Ensure all team members are trained, aligned with corporate goals, understand service offerings, and adhere to operational processes. • Performance & Quality Management : • Monitor Field Operations performance through metrics, site visits, customer interactions, surveys, and operational reports., • Identify and execute opportunities for process improvement, efficiency gains, and quality enhancements., • Develop, implement, and track KPIs that measure productivity, customer satisfaction, and operational excellence. • Strategic Planning & Organizational Design : • Develop strategic workforce plans, including staffing levels, organizational structure, locations, and resource allocation to meet projected business needs., • Lead long‑term initiatives that scale field operations in support of company growth, new product/service offerings, and emerging technologies., • Partner with senior leadership to define multi‑year operational strategies and investment priorities. • Financial Leadership (P&L Responsibility) : • Own the full P&L for Field Services, including revenue, operating expenses, margins, and financial forecasts., • Monitor financial performance vs. plan, identifying variances and implementing corrective actions., • Drive cost optimization without sacrificing service quality or customer satisfaction. • Customer & Stakeholder Management : • Support key customer relationships, participate in executive business reviews, and assist Sales/Account Management to maintain and grow accounts., • Ensure customer commitments and contract requirements are consistently met or exceeded. • Leadership, Coaching & Talent Development : • Lead all aspects of team development including hiring, coaching, performance management, mentoring, and career development., • Set clear expectations and build a culture of accountability, high performance, employee engagement, and continuous improvement., • Ensure compliance with HR policies and drive a positive, safe, and productive work environment. • Technology, Tools & Innovation : • Oversee implementation and utilization of field automation technology and ensure full adoption., • Evaluate emerging technologies and tools that enhance operational efficiency and service delivery., • Maintain up‑to‑date knowledge of telecommunications industry trends, operational best practices, and field service innovations. • Cross‑Functional Collaboration : • Partner with Sales, Engineering, PMO, Finance, HR, and Supply Chain to align operations with business needs., • Support pre‑sales solution design for service offerings that require field deployment or long‑term service delivery., • College degree, • 10+ years of experience in field service and telecommunications., • 5+ years of management experience overseeing a distributed, multi‑regional field workforce., • Experience managing and deploying field automation and scheduling tools., • Strong written and verbal communication skills., • Demonstrated financial management experience, including operational budgeting and P&L oversight., • Experience negotiating vendor and customer/business partner contracts., • Proven track record of exceeding customer expectations and managing large customer relationships., • Working knowledge of LAN/WAN technologies including routers, switches, and hubs., • Strong organizational, planning, prioritization, and multitasking skills., • Proficiency in Word, Excel, PowerPoint, MS Project. Preferred Qualifications : • Experience with process improvement methodologies (Lean, Six Sigma, etc.)., • Working knowledge of transport technologies such as Fiber optics, Low Earth Orbit Satellite (LEO), or Fixed Wireless (FWA)., • Ability to sit for extended periods while working at a computer., • Ability to stand, walk, bend, and climb stairs during field visits., • Occasional lifting or carrying of materials, equipment, or documents up to 25 pounds., • Ability to travel locally or regionally as needed; may include driving a company or personal vehicle., • Visual and auditory ability to safely navigate field environments, conduct inspections, and communicate effectively with team members and customers.

Hybrid – 3 days onsite per week.This is an excellent opportunity for a seasoned BA who can bridge business needs and technology solutions while bringing strong communication, documentation, and stakeholder engagement skills to the table.This role is ideal for someone who is not only strong in core

Source One is a consulting services company and we're currently looking for the following individual to work as a consultant with our direct client, a regional utility and gas company in Newark, NJ.No Third-Party, No Corp to Corp, No Sponsorship Now or Future.Title: Project Manager – Engineering.H

EVOS Construction, a division of All Season Global Solutions, is seeking an experienced and driven professional to join our growing team.We specialize in delivering fully integrated, turnkey construction solutions from concept through completion, with a focus on quality, efficiency, and client satis

This Jobot Job is hosted by: Kevin Shilney.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $60,000 - $80,000 per year.We are a respected law firm focused on probate, estate planning, business transactions, and civil/commercial litigation.Our

Project Manager and/or Business Analyst.Strong background in the investment management industry.Demonstrated expertise in process improvement and process-driven environments.Advanced SQL skills with the ability to work hands-on with data.Solid understanding of fixed income instruments and related da

Our client is a well-established and highly respected specialist in corporate interior projects, delivering high-quality workspace solutions for a diverse portfolio of clients.Known for their creativity, precision, and client-focused approach, they manage projects from concept through to completion,

The client is a Millwork specialist who operates in Manhattan.They have been established for over 30 years and have stamped their name into both the high-end residential and high- end commercial interiors sector.The client's impressive portfolio consists of high end residential and commercial renova

Ettinger Engineering Associates (EEA).MEP/FP and civil engineering design, is seeking a mid- to senior-level Passive House Specialist to lead and deliver high-performance building projects across our growing portfolio.This role goes beyond modeling – you'll lead projects from early design through

We are currently seeking a Financial Business Analyst to be based out of our Secaucus, NJ office.The Financial Business Analyst will serve a critical role in analyzing data and making recommendation to help achieve departmental and company goals.This job plays a critical role in providing insight an

You are a detail-oriented and proactive team player who thrives in a fast-paced, collaborative environment.You are eager to learn, organized, and ready to support cross-functional projects from initiation to completion.You bring strong communication skills, a growth mindset, and a passion for delive

Senior Financial Business Analyst.The Senior Financial Business Analyst plays a key role in leading the analytical execution and continuous improvement of the customer reconciliation program.This role is intended for an experienced analyst who can independently assess complex data sets, deeply under

Ridgefield Park, New Jersey, United States.About the Job Project Finance Manager.Engages in overall detail scope of project financing of renewable energy projects (Solar, Wind, BESS) in US/Canada from initial structuring of financing tranches, financial model analysis, teaser/CIM preparation to clos

McCarter & English LLP is seeking a New Business Intake Analyst who may be based in any of our offices.The salary range for this position is $65,000 $80,000 annually, depending on experience.If you have the appropriate experience, we invite you to consider joining our team.Candidates who receive an

Utility Industry Business Analyst.We are primarily looking for a strong Utility Industry Business Analyst with prior work experience in a Gas & Electric Transmission and Distribution utility in the Energy Efficiency and CIS areas.Proven experience in strategic business analysis roles.Proficiency in

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms.IRI has built its reputation on excellent service and integrity since its inception in 1996.Our mission centers on delivering only the best

Business Analyst With Medicare.Work Authorization: USC, GC, GC-EAD, H4EAD, TN, L2EAD.Job Description: This position is responsible for the ability to understand and abide by Federal Centers for Medicare and Medicaid Services guidance.

Your journey at Crowe starts here:.At Crowe, you can build a meaningful and rewarding career.With real flexibility to balance work with life moments, you're trusted to deliver results and make an impact.We embrace you for who you are, care for your well-being, and nurture your career.Everyone has eq

Location Hoboken/New Jersey/USA; Hybrid (3 days at client office NY) Experience 8+ Years Key Skills Finance Functional with.

The Product Owner / Technical Project Manager will serve as the bridge between business stakeholders and the development team, owning projects from concept through delivery.This role requires someone comfortable translating complex business and operational needs into structured technical requirement

With annual revenues of more than $5 billion, we employ over 2,800 people who operate 20 production units in six business divisions - Olefins, Polyolefins, Vinyl, Specialty Polyvinyl Chloride, Chlor-Alkali, and Oil & Gas.

Location: Newark, NJ (Hybrid) Contract Duration: 6 Months Responsibilities: Provide program management oversight over scope, schedule, and budget of energy efficiency projects.Considering making an application for this job Check all the details in this job description, and then click on Apply.Ensure

Senior Mechanical Project Manager.We are a leading organization within the utilities sector, dedicated to providing innovative solutions to energy and water management.Our mission is to enhance the reliability and efficiency of critical infrastructure, contributing to sustainable growth and operatio

As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration.If you’re looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you.The Scalable, Software Defined, Supportab

This Jobot Job is hosted by: Kevin Shilney.Are you a fit? Easy Apply now by clicking the Apply button and sending us your resume.Salary: $60,000 - $80,000 per year.We are a respected law firm focused on probate, estate planning, business transactions, and civil/commercial litigation.Our culture emph

Audio/Visual (AV) system design, consulting, and project execution.This role requires a technically strong professional who can.The ideal candidate will have experience designing.AV integrations, and working directly with clients and cross-functional technical teams.Act as the primary AV subject mat