Trabajos maintenance electrical en New Rochelle, New YorkCrear alertas

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside 60 miles of the Larchmont, New York area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside 60 miles of the Larchmont, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $30.00-$45.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$45 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other, • Check us Out: Easy Ice What you will do: The Technician II is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician II is a vital member of the Easy Ice service team, responsible for ensuring the optimal performance and reliability of ice machines through proficient installation, cleaning, maintenance, and troubleshooting. The ideal Technician II is results-oriented, driven by a passion for delivering exceptional customer service, and possesses a strong work ethic that inspires collaboration and excellence among colleagues. The Technician II will focus on maximizing equipment lifespan, minimizing service calls and emergency ice purchases, and ultimately enhancing customer satisfaction and loyalty. Key responsibilities include providing outstanding service and support during on-site visits, forging positive relationships with customers, managing installation and repair tasks, accurately diagnosing and resolving technical issues, training and support of less experienced technicians, and completing detailed service reports to improve future service quality. The Technician II will also maintain proper truck stock and supplies during field operations, maintain company vehicles in accordance with established policies, and uphold the Easy Ice brand image with professionalism and positive engagement. The successful candidate will embody a flexible, self-motivated approach to work, thrive in a fast-paced environment, and be dedicated to fostering a strong team dynamic while contributing to overall business growth and success. A successful Technician II will drive the following outcomes: • Deliver exceptional service that fosters positive relationships with customers, ensuring they are consistently satisfied with both the quality of service and the performance of their ice machines, • Perform thorough installation, repair, maintenance, cleaning, and troubleshooting of ice machines to improve their performance and longevity, thereby reducing the frequency of service calls and emergency ice purchases, • The Tech II may be required to lead the installation process, driving excellence by exceeding customer expectations with accurate, timely, and efficient installation of ice machine equipment, • Accurately diagnose and resolve technical issues on the first visit, minimizing downtime for customers and enhancing their overall experience, • Achieve or exceed performance metrics related to service response times, resolution rates, and customer feedback, demonstrating accountability and commitment to excellence Demonstrate flexibility in work schedules and adapt to changing operational demands while actively seeking opportunities for personal and professional growth within the field. How you will do it: • The Technician II is a progression from Technician I. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, preventative maintenance, trouble shooting, and repair of ice machine equipment as required. This may include bagging/delivering ice, or other duties as assigned., • Install, clean, maintain, troubleshoot and install Easy Ice equipment, with the goal to increase equipment life and reliability, reduce service calls, and reduce emergency ice purchases, • Provide service and customer support during field visits with a strong emphasis on building positive relationships with customers, • Train and mentor less senior technicians as required, • Manage on-site installation, repair, maintenance and test tasks, • Diagnose errors or technical problems and determine proper solutions, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards, • Ensure vehicle cleanliness and organization, removing all ice and trash at the end of each shift to improve safety and to uphold a professional appearanceWhat we are look for: Education: High school diploma or general education degree (GED) Vocational/Technical Training preferred Experience: • 1+ year experience in the diagnosis and repair of commercial equipment (prior experience with refrigeration, electrical, HVAC, ice machines, or related equipment), • EPA 2 Certification, • Working knowledge of mobile tools and applications, • Experience in and the ability to demonstrate volt meter operations, • Ability to work a full-time schedule which includes a rotating on-call schedule, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing repair and maintenance issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • Demonstrated track record of delivering highest level of customer satisfaction Certificates, Licenses and Registrations: • EPA 2 Certification Additional Required Attributes:, • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • Strong work ethic and dedication to new technologies and service protocols in the field of ice machine repair and maintenanceWork Environment and Physical Demands:, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionCompany Overview: Perfect Pour Draft located in Mount Vernon NY is a rapidly growing, high-performance service and installation company specializing in beer, soda, and beverage dispensing systems. We are a registered Coca-Cola vendor that currently services over five hundred accounts including sports stadiums and arenas, casinos, fast food chains and schools. Our reputation is built on quality workmanship, reliability, and strong customer relationships. We are looking for a skilled refrigeration technician who takes pride in their work and thrives in a fast-paced, hands-on environment. Position Summary: We are seeking an experienced Refrigeration Technician to install, maintain, and service beer and soda dispensing systems across the New York tri-state area. This role includes system installations, preventative maintenance, quality control inspections, and respond to service calls. Key Responsibilities: • Install beer and soda dispensing systems (draft beer, glycol systems, soda fountains, etc., • Installing and servicing refrigeration systems (compressors, controls, line sets, etc.), • Perform preventative maintenance to ensure optimal system performance, • Diagnose and repair refrigeration and dispensing system issues (electrical + mechanical), • Conduct quality control checks on installations and existing systems, • Respond to service calls independently in a timely and professional manner, • Maintain accurate service records and documentation, • Communicate effectively with customers and internal team members, • Ensure all work complies with safety and industry standards, • Working on glycol chillers and long-draw draft systems, • Ensuring systems are running efficiently and reliablyQualifications:, • Minimum 3+ years of experience in refrigeration and/or beverage system installation and service, • Strong understanding of refrigeration systems, glycol systems, and draft beer systems preferred, • Ability to troubleshoot, diagnose, and repair mechanical and refrigeration issues, • Valid driver’s license with a clean driving record, • Strong work ethic, attention to detail, and problem-solving skills, • Ability to work independently and manage time efficiently, • EPA certification preferred (or willingness to obtain Compensation & Benefits: • Competitive base salary, • Performance-based bonus structure, • Commission opportunities, • Overtime available, • Company vehicle (if applicable), • Paid Vacation, • Paid Sick Days, • Paid Holidays, • Tools and equipment provided, • Opportunities for growth and advancementAdditional Details:, • Occasional travel may be requested (not mandatory), • Work includes a mix of scheduled jobs and on-demand service calls, • Flexible schedule depending on workload What We’re Looking For: Someone who doesn’t just “do the job,” but takes ownership of their work. The right candidate is reliable, sharp under pressure, and committed to delivering top-tier service every time. Apply Today: If you’re an experienced refrigeration technician looking for a solid opportunity with strong earning potential and a company that values quality, we want to hear from you.

Job Description Position Overview: The position of the Mechanic is to maintain, diagnose and repair fleet vehicles, specializing on buses. The mechanic is responsible for repairing and troubleshooting mechanical and electrical issues, striving toward maximum reliability, functionality and safety. General Duties/Responsibilities: • Responsible for preventative maintenance such as changing tires, batteries, lights, controls, safety equipment, power steering, fluids, filters, etc., • Responsible for fleet condition by performing diagnostic testing repairs and rebuild of fleet vehicle components such as engines, transmissions, brake systems, electrical, mechanical, internal and external components, etc., • Responsible for scheduled preventive maintenance inspections, including body repairs, HVAC systems, electrical systems, steering, suspension systems, brake systems and drivetrain components., • Responsible for DOT inspections and document results to insure that vehicles meet N.Y. State DOT regulations., • Performs and analyzes diagnostic testing., • Responsible for operating vehicles while in strict compliance with Company policies, directives, and procedures and all traffic laws and regulations., • Conducts road tests to ensure fleet vehicles are operating in a safe and reliable manner, salt roads and participates in snow removal as needed., • Performs on-the-road repairs and road calls when necessary., • Effectively communicates with supervisors regarding equipment concerns and observations., • Utilizes various types of tools such as hand and power tools to perform repairs., • Maintains and repairs shop equipment as needed., • Responsible for performing all tasks in a safe manner, in an effort to reduce or eliminate accidents., • Interprets and applies knowledge from vehicle service manual and schematics to assist in the completion of repairs., • Performs system upgrades, campaigns and modifications on fleet vehicles as needed., • Participates in safety and educational training as required., • Assists fellow mechanics with repairs as needed., • Maintains equipment and work space safety and cleanliness Position Qualifications: • Required a minimum High School Diploma, GED or equivalent., • ASE certification preferred., • Minimum of 2 years’ experience as a mechanic preferred., • Must have and maintain an excellent Driver’s License, valid CDL preferred. CDL license required preceding the 5th month of employment as a mechanic., • Must have knowledge of technical and diagnostic equipment, including computer comprehension., • Must have a complete set of hand tools, in accordance with the department’s tools list., • Must be able to work any scheduled hours such as dayshift, nightshift, weekends, holidays, floater and overtime as needed., • Must have the ability to operate all mechanical equipment., • Must be able to document repairs, and diagnosis on assigned transit vehicles., • Must have a basic understanding of the design, adjustment, overhaul operation and maintenance of transmissions, heavy-duty engines and other fleet components., • Required to read schematics, maintenance manuals and interpret safety documents., • Must have excellent communication skills. Physical and Sensory Requirements: • Ability to climb stairs, reaches above shoulder level, walk extended distance, stand, kneel, sit for an undefined amount of time., • Ability to work in an environment with dust, fumes, exhaust, various noise levels, various temperatures, indoor and outdoor weather conditions for an undefined amount of time., • Ability to read, write and converse in English., • Ability to have discretion., • Ability to bend and lift without assistance up to 50 lbs., • Ability to push and pull a wide range of equipment, up to 100 lbs. without assistance., • Must be able to work in extreme heat, cold and in a damp environment., • Ability to physically and visually inspect equipment and fleet vehicles., • Ability to pass a DOT physical examination for Maintenance and 19A for part-time driving.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TOMCO, a TAG company is seeking Refrigeration Service Technicians for commercial service work in and around the Yonkers, NY area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retail locations, ensuring systems operate safely and efficiently. Roles and Responsibilities: • Diagnose, repair, and maintain commercial refrigeration systems (self-contained units, walk-ins, single systems, rack systems)., • Troubleshoot electrical and mechanical refrigeration components., • Perform preventative maintenance on HVAC and refrigeration equipment., • Complete minor plumbing repairs (walk-in drains, case drains, cooling towers, water-cooled condensers)., • Inspect refrigeration, electrical, and plumbing systems to identify service needs., • Communicate service updates with store managers and directors., • Provide repair estimates and recommend equipment replacement when appropriate., • Maintain van stock, tools, and required safety equipment. Skills and Qualifications: • 2-5 + years of HVAC/R experience, • Strong diagnostic and mechanical skills, • Professional communication abilities, • Attention to detail and strong decision-making skills, • Ability to participate in on-call rotation, • Ability to pass physical, drug screen, background check, and MVR review Preferred Qualifications: • Universal EPA Certification, • Electrical license, • 2–3 years minimum of grocery refrigeration experience, • HVAC/R technical school or related certifications Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company car, • Competitive salary, • Free uniforms, • Health insurance, • Paid time off Job Summary: We are looking for an HVAC Service Technician to join our family! SIGNA HVAC SYSTEMS is located in Whitestone NY since 2013. We are an installation (including plan and spec projects), maintenance and service company. We serve all 5 boroughs with a main client base in Manhattan. We work on conventional systems, VRF's water- and air-cooled systems, cooling towers, heating systems and more. WHAT SIGNA HVAC SYSTEMS OFFERS: Family Atmosphere Year-round work with 40+ hours/week $1000 SIGN ON Bonus Top pay and growth opportunity Company provides, take-home vehicle with gas card Medical Plan 401(K) with company match Life insurance, Disability, AD&D Year-end Bonus, commission Responsibilities: Knowledge of electrical, mechanics inspect, troubleshoot, diagnose and repair skills Install new heating, ventilation, and air conditioning systems Perform routine preventative maintenance Adhere to all safety policies and procedures Fill out job tickets via phone or Tablet Treat customers and employees with respect, courtesy and professionalism Strong customer communication skills Knowledge and Skills: Previous experience in HVAC. Minimum of 3 years of commercial, residential equipment Familiarity with HVAC wiring diagrams Ability to handle physical workload Strong problem solving and critical thinking skills Flexible/Positive Attitude Independent worker Take charge individual - likes challenges High energy, reliable, strong desire to serve customers and assist co-workers Organized and efficient, loyal, honest, trustworthy, personal pride, well groomed Commitment to quality. Always checks/tests work before leaving job. Must have valid driver's license with a good driving record. Good communication and written skills EPA Certification OSHA Certification G60, FDNY Fitness Certificate Ability to pass a pre-employment background check and drug screening. Employee Benefits: Salary plus Bonus and Commission Medical Plan Dental insurance Life/ AD&D insurance Paid vacation, sick days, holidays 401K match Uniforms Company tablet Company vehicle / gas card

Job Description General Summary We are seeking a skilled HVAC Technician to join our team to be responsible for the installation, maintenance, repair, and servicing of heating, ventilation, and air conditioning systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team. The HVAC Technician will ensure optimal performance and safety of HVAC systems in compliance with industry standards and regulations. Installs, maintains, services and repairs environmental control systems, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Duties and Responsibilities • Installation, service, troubleshooting and repairs including but not limited to; chillers, air handling units, controls, package units, split systems, exhaust fans, refrigerators, freezers, hot/chilled water pumps. Involvement in Site’s predictive maintenance program so previous experience is highly desirable., • Tasks ranging from operation of systems to the examination and evaluation of equipment to determine needed repairs, • Installs refrigeration and air conditioning systems by positioning compressors, motors, condensers, humidifiers, evaporators, heaters and other components in accordance with design specifications., • Charges refrigeration systems with refrigerant gas tests for leaks., • Starts unit and adjusts it for proper cut-in and cut-out of refrigeration units, humidifiers, heaters, air cleaners, and circulating pumps., • Adjust systems for optimal performance., • Maintains refrigeration and air conditioning systems by checking performance and determining problems. Repairs, adjusts, or replaces defective elements., • Installs, maintains and repairs the electrical and pneumatic systems associated with refrigeration and air conditioning equipment from the safety switch throughout the equipment., • Installs, maintains, repairs, operates all types centrifugal and reciprocating refrigeration/air-conditioning systems; also all types of pneumatic/electro-mechanical temperature controls., • Performs necessary plumbing procedures to ensure operation of systems and equipment, • Performs preventive maintenance., • Involvement in Site’s predictive maintenance program., • Performs other duties and shift coverage, as required. Knowledge, Experience and Skill Requirements • Must have EPA certification per CFR part 82f (Universal preferred) for servicing and recovery of refrigerants., • Ability to read blue prints, sketches, and specifications pertaining to air conditioning and refrigeration systems; to follow oral instructions; to use shop mathematics; to lay out work., • Minimum 4 years of experience performing the specific craft function or certification from a recognized trade school., • Requires broad trade knowledge of mechanical principals on standard shop methods of the Refrigeration and Air Conditioning Mechanic Trade., • Experience and/or certification in one or more predictive maintenance technologies (vibration analysis, infrared, ultrasound, etc.)., • High level of computer aptitude and knowledge of MS Office applications (Word, Excel, etc.)., • Ability to interpret and develop technical reports., • Able to operate testing equipment for the systems; to use all tools and equipment necessary to this trade; to follow standard methods and procedures for the most part, but on occasion to have the ability and knowledge to perform the unusual and difficult operations. Physical, Environmental and Sensory Requirements • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. Disclaimer: CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $35.62. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Description We are currently seeking Electricians, Helpers and Retired Electricians! Retired Electricians to Supervise and teach. You will strive to provide safe electrical systems for a variety of customers. Responsibilities for Electricians and Helpers: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes Responsibilities for Retired Electricians: • Supervise and Teach Qualifications for Electricians and Helpers: • 15+ year experience in electrical in the Commercial and Industrial field, • Knowledge of NEC Codes, control wiring, VFD's, PLC's and transformers., • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Must have active / clean Drivers License and transportation to and from work, • Stable work history preferred Qualifications for Retired Electricians: • 20+ year experience in electrical in the Commercial and Industrial field, • Must have active / clean Drivers License and transportation to and from work \nCompany Description Electrical Contracting Company Electrical Contracting Company

Overview: If you reside in California, please see our _ for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet and Facility Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this paratransit bus operation. The Fleet and Facility Maintenance Manager will ensure that all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly, and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for the maintenance program. Qualifications: Talent Requirements: • Candidate must have a minimum of five (5) years journey level mechanic experience with full knowledge and extensive experience in engine repair, automotive electrical, and air conditioning repair. The candidate should have prior experience in transit maintenance., • Strong managerial and training experience with a minimum of three (3) years of experience in maintenance supervision of five (5) or more mechanics is required., • Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with 150+ transit vehicles/equipment., • Previous passenger transportation in current project or similar environment preferred., • Must be able to manage and interface with client., • Must have the ability to track and control parts inventories, vendors and suppliers., • Must be able to properly prioritize, implement and manage work schedules, projects and assignments., • Must be able to manage the financial/accounting aspects of a fleet maintenance operation., • Must be able to communicate effectively with all levels of staff in written and oral formats., • Must have computer skills including word processing, spreadsheets and Microsoft outlook., • Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance., • Must display initiative, professionalism, candor and tact at all times., • ASE or manufacture’s certifications a plus., • Technical experience with fixed route transit bus maintenance., • Solid knowledge of managing audits, PM schedules., • Experience with Gasoline and Electric and CNG vehicles is a plus., • Must have a CDL class C with passenger and airbrake endorsement. Starting salary range: $92,000 - $110,000 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Job Description Automotive Technician / Auto Mechanic | $65K-$125K+ | 100% Employer-Paid Health Insurance Location: Yonkers, NY Pay: $65,000-$125,000+ per year (Based on Experience & Productivity) Earn Top Pay with a Shop That Invests in Its Technicians Are you an experienced Automotive Technician or Auto Mechanic looking for a shop where your skills are respected, your workload stays steady, and your career can grow? Hughes Motors is a well-established, family-owned automotive repair shop serving Yonkers and Lower Westchester for decades. Our reputation is built on honest service, quality repairs, and long-term customer relationships. As our business continues to grow, we're looking for an experienced technician who enjoys solving problems, takes pride in quality workmanship, and wants to be part of a professional, team-oriented shop. Whether you're an ASE Certified Technician, Diagnostic Technician, General Repair Technician, or experienced Auto Mechanic, we'd love to meet you. Why Join Hughes Motors? • Earn $65,000-$125,000+ per year depending on skill set, • 100% employer-paid health insurance, • Paid holidays, • Paid vacation, • 401(k) retirement plan, • Paid training and continuing education, • Modern equipment and diagnostic tools, • Consistent workflow with an established customer base, • Clean, organized, professional shop, • Family-owned company that values its employees, • Supportive management and experienced team, • Long-term career stability What You'll Do As an Automotive Technician, you'll diagnose, maintain, and repair a wide variety of domestic and import vehicles while delivering high-quality workmanship and outstanding customer service. Responsibilities • Diagnose mechanical, electrical, and drivability concerns, • Perform engine, brake, suspension, steering, HVAC, and transmission repairs, • Complete routine maintenance and manufacturer-recommended services, • Perform vehicle inspections and identify needed repairs, • Conduct New York State Safety and Emissions Inspections (or obtain certification), • Document repair recommendations accurately, • Work closely with Service Advisors to communicate findings, • Maintain a clean, safe, and organized work environment Qualifications • At least 3 years of professional automotive repair experience, • Strong diagnostic and troubleshooting skills, • Tekmetric software experience a PLUS, • Experience working on domestic and import vehicles, • NY State Inspection License or willingness to obtain one, • ASE Certifications are a plus, • Valid driver's license, • Positive attitude with a strong work ethic, • Ability to work independently and as part of a team Ideal Background We encourage experienced candidates from backgrounds such as: • Automotive Technician, • Auto Mechanic, • ASE Certified Technician, • Diagnostic Technician, • Master Technician, • General Service Technician, • Automotive Service Technician, • Dealership Technician, • Independent Repair Shop Technician About Hughes Motors Hughes Motors is a trusted, family-owned repair facility that has earned a reputation for honesty, quality workmanship, and exceptional customer service. We believe great technicians deserve a workplace where they have the tools, support, and respect needed to succeed. If you're looking for a long-term opportunity with excellent earning potential, outstanding benefits, and a team that values your experience, we'd love to hear from you. Apply today to start the conversation.

Job Description AUTOMOTIVE TECHNICIAN / AUTO MECHANIC / SERVICE TECHNICIAN – MASTER TECH – UP TO $150,000+ PER YEAR CarGuys Inc. – High-Paying Automotive Technician Jobs Nationwide JOB TYPE Full-Time High Pay + Bonus Opportunities ABOUT THE ROLE CarGuys Inc., America’s and Canada’s #1 Automotive Recruiter, connects automotive technicians, auto mechanics, and service technicians with top-paying dealerships and repair facilities across the U.S. and Canada. We work with employers actively hiring automotive technicians at all levels, from entry-level auto techs to ASE-certified master technicians. Our clients provide the opportunity—you choose the best fit. WHAT OUR CLIENTS OFFER Top Pay for Automotive Technicians and Auto Mechanics • Industry-leading compensation for service technicians, • Signing bonuses and performance-based incentives Modern Automotive Shops • Advanced diagnostic tools and equipment, • High-volume service departments, • Work on domestic, import, diesel, and electric vehicles Career Growth for Automotive Technicians • Paid training, including EV and diagnostic training, • ASE certification support, • Advancement to Master Technician and Shop Foreman rolesWHY WORK WITH CARGUYS INC., • Access to top automotive technician, auto mechanic, and service technician jobs, • Personalized job matching, • No cost to candidates — employers retain our services AUTOMOTIVE TECHNICIAN / AUTO MECHANIC RESPONSIBILITIES • Perform automotive repair and maintenance on engines, brakes, suspension, and drivability systems, • Diagnose mechanical and electrical issues using automotive diagnostic equipment, • Complete repairs to manufacturer specifications, • Perform vehicle inspections, diagnostics, and troubleshooting, • Handle warranty repairs, recall repairs, and dealership service work, • Maintain high-quality standards as an automotive technician or service technician AUTOMOTIVE TECHNICIAN / AUTO MECHANIC QUALIFICATIONS • Experience as an automotive technician, auto mechanic, service technician, or auto tech, • All experience levels considered, including entry-level technicians and master technicians, • Strong diagnostic, troubleshooting, and repair skills, • Personal tools required, • Valid driver’s license preferred AUTOMOTIVE TECHNICIAN SKILLS (AUTO MECHANIC / SERVICE TECHNICIAN) Automotive technician skills include automotive diagnostics, auto repair, and vehicle maintenance across gasoline and diesel engines, engine repair, engine performance, and tune-ups. Experience with automatic transmission, manual transmission, drivetrain and axle repair, suspension and steering systems, brake repair, electrical systems, and electronic diagnostics is required. Skilled in HVAC systems, vehicle troubleshooting, and advanced diagnostic scan tools. Experience performing automotive service technician duties in dealership service departments or independent repair shops, including warranty repair, recall repair, and vehicle inspections. ASE certification in engine repair, brakes, suspension, electrical systems, HVAC, and engine performance is strongly preferred. Keywords: automotive technician, auto mechanic, service technician, auto tech, master technician, ASE technician, automotive repair, automotive diagnostics, vehicle repair, dealership technician, repair technician HOW IT WORKS You are applying through CarGuys Inc., America’s and Canada’s #1 Automotive Recruiter. Automotive dealerships and repair facilities partner with us to hire automotive technicians and auto mechanics. If selected, your resume will be forwarded to a local employer. APPLY TODAY Apply now to connect with high-paying automotive technician, auto mechanic, and service technician opportunities. CARGUYS INC. America’s and Canada’s #1 Automotive Recruiter #ZR

Job DescriptionPosition Overview We are seeking an experienced Certified Automotive Technician to join our team at our Alfa Romeo & Maserati dealership in Englewood Cliffs, NJ. The ideal candidate is a highly skilled technician with strong diagnostic and repair abilities and a commitment to delivering exceptional workmanship. Alfa Romeo and/or Maserati certification is required for consideration. Compensation & Schedule Pay: $40–$50 per hour, based on experience and qualifications with UP TO $15K Sign-on Bonus Schedule: Monday–Friday Full-time position Competitive compensation based on experience and certification level Responsibilities Perform maintenance, diagnostics, and repairs on Alfa Romeo and Maserati vehicles Accurately diagnose mechanical, electrical, and drivability concerns Perform manufacturer-recommended services and repairs according to factory specifications Complete repairs efficiently while maintaining a high standard of quality Utilize factory diagnostic equipment and technical information Document all work performed accurately Maintain a clean, organized, and safe work environment Communicate effectively with the Service Department regarding vehicle concerns and repair needs Stay current with manufacturer technology, technical updates, and repair procedures Qualifications Current Alfa Romeo and/or Maserati certification is required Previous professional automotive technician experience Strong diagnostic and troubleshooting skills Ability to accurately and efficiently complete repairs Knowledge of modern automotive electrical and computer systems Valid driver's license and acceptable driving record Strong attention to detail and commitment to quality Ability to work independently and as part of a professional service team What We’re Looking For We are looking for a technician who takes pride in their work, understands the importance of precision with premium European vehicles, and is committed to providing customers with the highest level of service. If you are an Alfa Romeo/Maserati Certified Technician looking for a Monday–Friday opportunity with competitive pay of $40–$50 per hour, we want to hear from you.

Job Description Job Title: Automotive Technician / Mechanic (B Tech) Location: Full Time, Larchmont, NY Compensation: *$27-47$/hr plus full benefit package (day one) + $2,000 sign-on bonus We want you to be a part of our team — not just for a job, but for a long-term career. We're committed to investing in your growth, helping you build your skills, and supporting your professional development every step of the way. As a key player in our success, you’ll work with some of the largest fleet companies in America and gain hands-on experience with our 209 unique vehicle models. Join us and grow your future with a company that believes in your potential. Flexcar is completely reimagining car ownership. We offer the world’s first month-to-month car lease, with insurance and maintenance included. Members can swap cars anytime as their needs change, without the commitment or hassle of traditional car ownership. By combining operational expertise with technology, data, and AI, we’re transforming every aspect of the customer journey and delivering a more affordable, flexible, and hassle-free alternative to buying or leasing. Under minimal supervision, performs all processes necessary to complete basic mechanical and cosmetic repairs on fleet vehicles following Flexcar policies and procedures. The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnoses with minimal assistance. These repairs include but are not limited to light engine work, brake systems, drive shafts, electrical systems, interior trim and entertainment components, exterior body panels and components, HVAC systems, steering & suspension systems, and any other repair as assigned by site management. What You’ll Love about this Role: Being a core member of the site team – our customer safety depends on you! Being part of an automotive company that recognizes talent – where you can make a difference. We are growing quickly – which means your career can grow quickly with us too! What You’ll Do: Identify, order, and maintain correct supplies and parts in order to properly service vehicles. Understand how to properly use hand tools, chemicals, and all shop equipment. Make accurate use of the return inspection information on each vehicle Document all work performed and recommended on assigned repair order Communicate with service manager or site management when additional work is needed or if repairs cannot be completed within the promised time Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by site management Participate in sponsored training programs and schools to continuously expand your knowledge of new technology Complete the work, notations and time-keeping necessary to the successful completion of all repair orders. Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the site, its customers, or employees Take care to ensure that all vehicles are returned to the lot as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all vehicles, property and information What Drives Success for this Role: ASE certifications heavily preferred Previous automotive technician experience required Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Provide support to other associates and managers as needed. Perform all work within standardized cycle times Flexibility to workdays, evenings, weekends and/or holidays. Willingness to work in varying weather conditions. Ability to carry tools and supplies up to 75lbs. Valid driver’s license and an acceptable driving record (per company standards) 2+ years of automotive repair experience is preferred. At least 18 years old What tops the tank: Rest & Relax! Potential to accrue 80 hours of PTO your first year, and up to 120 hours in later years plus multiple company paid holidays and 40 hours of Sick time. Save for Your Future! 401(k) with company match from day one of hire Benefits: Excellent, low-cost healthcare coverage including: medical, dental, vision, eligibility day one. Wellness Programs, Flexible Spending Accounts, Health Savings Account, Life and Disability Insurance Drive a Flexcar! Discounted employee rate on Flexcar products and no annual membership fee Weekly Pay and Employee Referral Bonus Uniforms Tools and Education: Reimbursement for ASE certifications and yearly tool allowance paid directly to you. *Actual compensation will vary depending on job-related knowledge, skills, experience, and market conditions. • Sign-on Bonus: $2,000 total, with $1,000 paid after 3 months and an additional $1,000 paid after 6 months of employment. Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the sole discretion of the Employer. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR BTyvm0JonC

Job DescriptionCraftsman / Carpenter - Remodeling Experience Hiring Now in Whitestone, NY TruBlue Home Services is seeking full-time professional craftsman to serve our customers in the Whitestone/Queens area. Our Mission is to provide home remodeling and other home maintenance work to the community with the highest level of service possible. We focus on helping all types of homeowners around the city, but also truly have a passion for helping seniors and disabled. Our goal is to allow our clients to live safer and more independent lives with the peace of mind their home is cared for. We provide: -Year-Round Stable, Steady Work -Regular Work Hours -Competitive pay -Flexible Scheduling -Company Logo Wear and strong office support If you have 5 or more years of paid experience in remodeling, general carpentry, or handyman work, we want to hear from you. We are looking for: -General Carpentry -General Home Repairs and Handyman Work -Tile work -Drywall Repair / Patching / Caulking -Flooring Repair and Installation -Bathroom Upgrades / Remodel -Minor Plumbing and Minor Electrical -Painting Interior and Exterior What we value… RESPECT – We treat everyone as we want to be treated. Every voice matters. EXCEED EXPECTATIONS – We do more than expected, going above and beyond. ACCOUNTABILITY – We want to be known as a trusted partner clients can count on CONTINUOUS IMPROVEMENT– We know success means getting better each and every day. HONESTY – We are open and honesty in all our communications. Are you looking to reach for something better? Are you tired of being under-appreciated in your current job? Do you want to be part of a family business that values you? If so, we may have a position for you! We offer premium services to our clients and need team members willing and able to provide a first class experience. Are you passionate about what you do? Do you have a strong work ethic and take pride in your work? Do you enjoy helping others? Are you sincere and pleasant and enjoy customer interaction? If this sounds like you and something you might be interested in, please submit your resume and apply now Powered by JazzHR lBNU66RmMA

Working at Liberty Coca-Cola Beverages LLC is all about pursuing a career not just a job. Discover what it means to be energized by a multitude of possibilities and a dynamic team. Minimum Salary: $30.00 pe hour. Maximum Salary: $35.00 per hour. About Liberty At Liberty Coca-Cola, we strive to make our workforce as representative and inclusive as the communities we serve. Our associates are our asset, and we are committed to investing in our people, maintaining the highest safety standards, and creating a culture of growth and innovation. We offer competitive compensation and benefits packages to full-time, permanent associates, including: Medical, Dental, Vision, Prescription drug plans, 401K with company contributions, paid vacation, company paid holidays, tuition reimbursement, and more. Discover what it means to be energized by a multitude of possibilities and a dynamic team. Join us here at Liberty Coca-Cola Beverages LLC. Summary The System Maintenance Mechanic Specialist is responsible for repairing and maintaining all equipment within the warehouse system, including parts purchasing. In this role, the Specialist must identify, troubleshoot, repair and provide solutions for problems that occur in Automation equipment and processes. Fills in for Operations Supervisor. Responsibilities Schedule & conduct preventive maintenance, be alert for issues or conditions that may cause system difficulties Generate, complete work order, rebuild and fabricate parts if needed Utilize menu driven software, troubleshoot system issues Interface with the Vertique support team as required Record & communicate system events that affect production, regularly Monitor the palletizers to ensure a continuous operation Monitor the case conveyor going into the palletizers to incorrect or product out of specs before it enters the palletizer Lead others and inform pickers and fork truck drivers when critical items need to be addressed Respond to sequence check alarms, or any other system stoppage, and ensure that sequencing is accurately maintained as product flows through the conveyor system Protect the integrity and quality of product at all times while adhering to company policies & procedures Qualifications High school diploma, GED or equivalent required 1-3 years of Industrial Maintenance experience required Demonstrated mechanical, technical and electrical aptitude Strong analytical, organizational and problem solving skills Basic proficiency with computer applications (Microsoft Office and Outlook) High school diploma or GED required Computer and database application skills Ability to operate a manual / powered pallet jack or lift product Must be able to work nights, weekends or other irregular hours as required by business needs bending, kneeling, lifting of 50+ pounds and climbing Additional Information Liberty Coca-Cola Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. For additional information, please visit our company website at

Job Description We are looking for experienced pros or highly motivated individuals ready to master the trade. The TNI Mission We are seeking Fiber Optic Cable Technicians who take pride in their work. Whether you're a seasoned splicer or a mechanically-inclined go-getter, we provide the environment and the tech to help you excel. We will train the right people, but we expect excellence in return. The Requirements • Experience: Minimum of 1 year of fiber optic cabling experience (preferred)., • Legal & Safety: Must be able to pass a comprehensive background check., • On the Road: Must possess a valid Driver’s License with a clean driving record., • The Vibe: Energetic, detail-oriented, and ready to solve problems on the fly. What You’ll Be Doing You aren't just "pulling wire." You are building the infrastructure of the future. • Precision Splicing: Perform fiber splicing with surgical precision to ensure secure, high-speed connectivity., • Advanced Installs: Install, test, and troubleshoot fiber optic, Ethernet, telephony, and low-voltage systems in both residential and commercial settings., • Problem Solving: Use tools like ohmmeters to diagnose electrical issues and apply your mechanical knowledge to navigate complex pathways (walls, ceilings, and underground)., • System Maintenance: Provide elite field service support, replacing faulty components and optimizing network performance on-site., • Blueprint Execution: Interpret technical diagrams and schematics to ensure every project meets industry-leading safety codes and specifications. What You Bring to the Table • Technical Knowledge: Hands-on experience with telephony systems and low-voltage wiring., • Tool Savvy: Mastery of hand tools and a high mechanical aptitude., • Field Experience: Prior experience as a service technician in the field is highly desirable., • Safety First: A deep understanding of electrical safety practices and low-voltage standards. Why Tech Network Inc.? • Cutting-Edge Tech: Work with the latest equipment in a fast-paced, high-impact environment., • Real Career Growth: We don't just offer a job; we offer a path to becoming a top-tier network specialist., • Supportive Culture: We value quality workmanship over speed. If you do the job right, we have your back. Join a team that respects your skills and rewards your hustle. \nCompany Description With continued focused on safety and skill development, we offer a wide range of residential and commercial telecom turn-key solutions, designed to exceed our client’s needs. Our learning journey team ensures timely completion and comprehension of all required technical and advanced training, inclusive of new products and services. At TNI, continuous learning begins with the Senior Leadership Team and flows throughout the entire organization to ensure our technicians are always up to speed. We truly believe there’s no ”I” in team, and TNI employees have full access to every member of our leadership team, including ownership via our welcoming open-door policy. With continued focused on safety and skill development, we offer a wide range of residential and commercial telecom turn-key solutions, designed to exceed our client’s needs. Our learning journey team ensures timely completion and comprehension of all required technical and advanced training, inclusive of new products and services.\r\n\r\nAt TNI, continuous learning begins with the Senior Leadership Team and flows throughout the entire organization to ensure our technicians are always up to speed. We truly believe there’s no ”I” in team, and TNI employees have full access to every member of our leadership team, including ownership via our welcoming open-door policy.

Job Description TITLE: IT or Help Desk Manager DEPARTMENT: INFORMATION TECHNOLOGY REPORTS TO: DIRECTOR OF IT FLSA STATUS: EXEMPT JOB DESCRIPTION REVISION: 8/21/26 BASIC FUNCTIONS The IT Manager is responsible for managing information technology system used to support the organization. This includes the hybrid infrastructure spanning on-premises systems, Microsoft 365 GCC High, Azure Government, and AWS GovCloud environments. This role is critical to ensuring the confidentiality, integrity, and availability of systems supporting Controlled Unclassified Information (CUI) and directly contributes to achieving and maintaining CMMC compliance. The IT Manager serves as a technical lead, driving IT strategy, and secure system design while mentoring junior staff and enforcing operational rigor across all IT platforms. SPECIFIC DUTIES Architecture & Engineering • Architect and administer enterprise infrastructure across on-prem (Nutanix AHV), Azure Gov, and AWS GovCloud, • Define and enforce standards for compute, storage, networking, and identity across hybrid environments, • Lead infrastructure modernization initiatives including cloud adoption, workload migration, and platform standardization, • Act as escalation point and technical authority for complex infrastructure and security issues, • Mentor junior engineers and provide technical guidance across IT Operations Hybrid Cloud & Platform • Architect and administer Microsoft 365 GCC High (Exchange Online, Teams, SharePoint, Intune, Defender suite), • Manage Azure Government services (IaaS, PaaS, networking, identity, policy, and security controls), • Support AWS GovCloud (US) environments including EC2, S3, and VPC, • Ensure proper boundary management, tenant segregation, and data residency compliance for regulated workloads, • Implement and maintain cloud governance (RBAC, policy, tagging, and security baselines) On-Prem Infrastructure (Nutanix-Centric) • Design, deploy, and optimize Nutanix AHV clusters, storage (AOS), and lifecycle management (LCM), • Manage Windows Server environments (2016/2019/2022) including:, • Active Directory (tiered model), • DNS, DHCP, Group Policy, • Maintain hybrid identity integration with Microsoft Entra ID (Azure AD), • Oversee core enterprise services (file services, print, RDS, SQL Server) Network, Security, Compliance & CMMC Alignment • Architect and maintain secure network infrastructure including:, • Fortinet (FortiGate) firewalls, • Meraki switching and wireless, • Site-to-site and client VPNs, • Lead network segmentation strategies for CUI environments and audit boundaries, • Ensure systems are configured and maintained in alignment with:, • NIST 800-171, • CMMC, • Support audit readiness, SSP documentation, POA&M tracking, and evidence collection, • Implement and maintain:, • EDR/XDR (e.g., SentinelOne), • SIEM integrations, • Vulnerability scanning and remediation programs, • Enforce secure configuration baselines Backup, Disaster Recovery & Resilience • Architect and maintain enterprise backup solutions across on-prem and Gov Cloud platforms, • Define and enforce RTO/RPO aligned with business and compliance requirements, • Lead disaster recovery planning, tabletop exercises, and failover testing Documentation, Change & Governance • Maintain detailed architecture diagrams, and SOPs, • Enforce strict change management aligned with risk, impact, and rollback planning, • Ensure all infrastructure changes meet audit and compliance traceability requirements STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices.” METRICS AND MEASURABLES Open Issues for IT Help Desk • Waiting for 3rd Party: Actively reviewed with Management to ensure relevance and appropriate priority., • Waiting for Customer: Target fewer than 15., • Waiting for Support: Target fewer than 10., • Adhere to all business‑defined SLAs for ticket handling. Adherence to Change Management Policies and Procedures • Changes should be executed with minimal impact to business operations., • Communication, backup, recovery planning, and risk assessment must be thoroughly evaluated and completed. Project-Related Work • Complete assigned project tasks within established deadlines., • Provide clear and timely communication regarding project status. Compliance • Maintain compliance with all required regulations, including NIST 800‑171, CMMC and related frameworks. EDUCATION / EXPERIENCE / COMPENTENCY Required • Bachelor’s degree or equivalent experience (7–10+ years in infrastructure engineering), • Deep expertise in:, • Microsoft 365, • Azure Government, • AWS GovCloud (US), • Nutanix AHV, • Windows Server & Active Directory (tiered / secure design), • Fortinet firewalls & Meraki networking, • Strong experience with:, • Hybrid identity (Entra ID + AD), • Security tools (EDR/XDR, SIEM, vulnerability management), • Backup and disaster recovery Preferred • Experience leading CMMC audit readiness or certification, • Strong scripting/automation skills (PowerShell, Python, Terraform), • Experience with STIGs and federal security controls, • Familiarity with enclave design for CUI environments Certifications (Preferred) • Microsoft (Azure Government / Security / M365), • AWS Certified (GovCloud-relevant certifications), • Nutanix Certified Professional (NCP) or higher, • Fortinet NSE, • CompTIA Security+ / CISSP (strong plus) PHYSICAL REQUIREMENTS (On-Prem Component) • Ability to lift and rack equipment (up to ~50 lbs), • Hands-on work in data centers/server rooms (cabling, rack/stack), • Availability for after-hours maintenance windows and incident response, • Occasional travel between sites TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN BLUE RAVEN’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job DescriptionMaintenance STAFF Hudson Hill Center for Rehabilitation & Nursing 65 Ashburton Ave, Yonkers, NY Position Summary The Maintenance Staff is responsible for maintaining the facility in a safe, functional, and well-maintained condition. This role supports daily operations by performing repairs, preventative maintenance, and ensuring compliance with safety standards in a skilled nursing environment. BE PART OF AN AMAZING MAINTENANCE TEAM!! JOIN NOW! Full Time 8am - 4pm and weekends WHY WORK FOR US? BECAUSE WE OFFER Payrate $20/hour Direct Deposit Health Insurance Dental Insurance Vision Insurance Paid Time Off Holiday Pay 401K Key Responsibilities Perform routine maintenance and repairs (plumbing, electrical, HVAC, carpentry) Complete work orders in a timely and efficient manner Conduct preventative maintenance on equipment and building systems Maintain grounds, including snow removal and basic landscaping Ensure facility safety by identifying and correcting hazards Assist with room setups, moves, and equipment installations Maintain tools, equipment, and maintenance logs Support emergency repairs and on-call maintenance needs Follow safety procedures and ensure compliance with Occupational Safety and Health Administration (OSHA) standards Assist with maintaining compliance for Centers for Medicare & Medicaid Services (CMS) and state regulations Qualifications Must have Electrical, Mechanical and Plumbing experience High school diploma or equivalent required 1 years of maintenance experience (healthcare setting preferred) Basic knowledge of plumbing, electrical, and mechanical systems Ability to use hand and power tools safely Strong problem-solving and time management skills Ability to lift up to 50 lbs and perform physical tasks Must be able to pass a background check

Job Description Overview Role: Facility Manager Join Campus Services Group (CSG) as a Facilities Manager! In this leadership role, you’ll oversee all campus and facility operations, including Facilities, Grounds, Custodial Services, and Project Management for a day school in your area. You’ll manage a team and coordinate with outside contractors, ensuring the campus is clean, safe, and well-maintained. If you have experience in facilities management and a commitment to creating a well-functioning learning environment, we’d love to have you on our team! Responsibilities • Oversee campus facilities, grounds, custodial services, and project management., • Manage a team of staff, contractors, and vendors, ensuring performance, training, and development., • Ensure clear communication on facilities, construction, and safety projects within the school community., • Develop and manage the annual facilities budget, review invoices, and oversee preventive maintenance programs., • Conduct inspections to ensure safety, cleanliness, and adherence to standards., • Manage sustainability initiatives and collaborate with school departments on on-campus events., • Oversee CMMS to ensure timely completion of work orders and maintenance tasks. Qualifications • Bachelor’s degree or equivalent experience in Management, Civil or Mechanical Engineering, Facilities, or Construction Management (preferred)., • 5+ years of experience in facility/building/property management or construction management, with at least 5 years in a supervisory role (educational setting experience preferred)., • Expertise in at least two technical trades (plumbing, carpentry, mechanical, electrical, roofing, HVAC, or other building trades)., • Basic computer skills (preferred)., • Strong leadership and communication skills, both oral and written., • Ability to maintain records and complete reports as required., • Ability to interact positively with the client, staff, and the public., • Must comply with COVID-19 vaccination policies as required., • Must provide a criminal background check. Ready to Join Us? If you’re passionate about managing safe, clean, and functional school environments, apply now to become a School Director of Facilities at CSG!

Job DescriptionDescription: Oneida Professional Services (OPS) is actively seeking a highly qualified Marine Engineering Instructor (Contingent Faculty) to support the United States Merchant Marine Academy (USMMA) in Kings Point, New York. This position supports the Marine Engineering Department and provides instruction, mentorship, and academic leadership to future marine engineering officers. *This position is contingent on the award of a federal contract. Key Responsibilities • Deliver instruction within the Marine Engineering Department., • Teach courses which may include:, • Basic & Advanced Tanker Operations, • Introduction to Electrical Engineering, • Electrotonic, • Machine Ship, • Introduction to Marine Engineering I & II, • Marine Steam Plants & Components, • Internal Combustion Engines, • Marine Refrigeration, • Gas Turbine and Marine Auxiliary Equipment, • Marine Plant Automation and Controls, • Marine Engineering for Deck Officers, • Diesel Engine Maintenance, • Mentor Midshipmen and support student academic success., • Conduct course assessments and maintain academic records., • Participate in research, scholarly activities, faculty committees, and institutional service efforts., • Develop course content and instructional materials consistent with accreditation requirements and Academy standards., • Submit grades through the Academy's electronic student information system., • Maintain weekly office hours for student consultation and academic advising., • Report directly to the Department Head of Marine Engineering.Requirements: Minimum Qualifications: • Bachelor's degree from an accredited college or university in:, • Marine Engineering, • Mechanical Engineering, • Naval Architecture, • Naval Engineering, • Ocean Engineering, • Electrical Engineering, • Nuclear Engineering, • Or a closely related engineering field., • Sea service as a licensed engineering officer at the Second Assistant Engineer level or above., • Practical marine engineering experience., • Proficiency with Microsoft Office applications, including Word, PowerPoint, Outlook, and related software., • Strong verbal and written English communication skills., • Ability to meet all government background investigation and suitability requirements. Preferred Qualifications, • College-level teaching experience., • Naval engineering officer experience., • Engineering design experience within maritime, naval, or power generation environments., • Power plant operations experience., • Experience teaching marine engineering or maritime technology coursework., • Experience working with maritime simulation, training, or academy environments. Work Schedule, • Monday through Friday, • 8:00 AM to 4:30 PM (EST), • On-site position at the United States Merchant Marine Academy in Kings Point, New York., • Telework and remote work are not authorized.Benefits (Federal), • 15 Days of Paid Time Off, • 11 Paid Holidays, • 401(k) Retirement Plan with Company Match, • Medical, Dental, and Vision Insurance, • Employee Referral Program, • Tuition Reimbursement, • Employee Assistance Program (EAP), • Wellness Program, • Multiple Voluntary Medical Benefits About Us: The Oneida ESC Group is a family of companies owned by the Oneida Nation of Wisconsin that delivers customer-focused engineering, science, and construction services worldwide. Our family of companies includes: • Oneida ESC Group (OESC), • Oneida Professional Services (OPS), • Oneida Total Integrated Enterprises (OTIE), • Mission Support Services (MS2), • Sustainment & Restoration Services (SRS), • Oneida Engineering Solutions (OES), • General Mechanical Corporation (GMC), • LG2 Environmental Solutions (LG2), • Oneida Environmental (OE) We integrate our staff for dedicated, cooperative, and business-like delivery of services to enhance our customers' missions. Equal Employment Opportunity Oneida ESC Group is an equal opportunity employer committed to inclusion and diversity in the workplace. We provide equal employment opportunities to all qualified applicants and employees without regard to any characteristic protected by federal, state, or local law.

Job Description Bergen Protective Systems, Inc. (BPS Alarms) – Englewood Cliffs, NJ Full-Time | On-Site | Monday–Friday Pay: $29.00–$36.00 per hour / $60,000.00–$75,000.00 per year, based on experience Benefits: 401(k) with company contribution, paid time off, paid holidays, health insurance About Us Bergen Protective Systems, Inc. is a family-owned life safety and electronic security systems company based in Englewood Cliffs, NJ, with over 60 years of experience serving commercial, industrial, and institutional clients throughout New Jersey and New York. We specialize in fire alarm systems, intrusion detection (burglar alarm) systems, access control, CCTV surveillance systems, and central station monitoring. Our team takes pride in delivering quality workmanship and attentive service on every project. The Role The Billing & Accounts Receivable Administrator is responsible for the full invoicing and receivables cycle, from preparing monthly AIA progress billing on large construction projects, to managing recurring billing for monitoring, inspection, and service agreements, and following through on collections until invoices are paid. This role also tracks sales commission compensation and supports day-to-day general office operations, including answering phones and assisting with back-office tasks. The ideal candidate has hands-on construction-industry billing experience, is comfortable working directly with general contractors and property managers, and takes ownership of getting the company paid accurately and timely. Key Responsibilities Progress Billing (Construction Projects) • Prepare and submit monthly AIA G702/G703 applications for payment, including schedules of values, percent-complete, stored materials, and change orders, • Track retainage by project and invoice, and pursue retainage release at project closeout, • Coordinate with project managers each billing cycle to confirm progress and approved change orders, • Prepare and track conditional and unconditional lien waivers, certificates of insurance, and other billing backup required by GCs, • Submit pay applications through GC portals (e.g., Textura, GCPay, Procore) and meet each GC's billing deadlines and requirements Recurring & Service Billing • Manage recurring billing for central station monitoring, annual/semi-annual inspection agreements, and service contracts, • Invoice completed service calls and work orders promptly and accurately, • Maintain contract records, renewal dates, and billing schedules; flag upcoming renewals and price adjustments, • Apply correct NJ sales tax treatment, including capital improvement vs. repair/service, and collect and file exemption certificates (e.g., ST-8, ST-5) Accounts Receivable & Collections • Monitor AR aging and proactively follow up on past-due accounts by phone and email, • Resolve billing disputes and short-pays by working with clients and internal staff, • Post payments, reconcile accounts, and keep customer account records current, • Escalate seriously delinquent accounts and assist with lien filings or other collection actions as needed, • Prepare regular AR and collections status reports for management Sales Commission Tracking • Track and calculate sales commissions according to the company's commission plan, based on invoiced and collected revenue, • Reconcile commissionable sales against client payments, credits, and adjustments before commissions are paid, • Prepare commission statements and summary reports for management review and approval, • Submit approved commission amounts for payroll processing and keep accurate historical records Office & Operations Support • Answer and route incoming phone calls in a professional, client-focused manner, • Assist with scheduling, client inquiries, and general administrative tasks, • Support other back-office functions such as document management, vendor paperwork, and data entry as needed Required Qualifications • 3+ years of billing experience in the construction industry, with direct hands-on AIA G702/G703 progress billing experience (required), • Experience with recurring or subscription-based billing (service contracts, monitoring, maintenance agreements, etc.), • Proven collections experience, including comfort making follow-up calls and holding clients accountable while preserving the relationship, • Working knowledge of retainage, lien waivers, change orders, and schedules of values, • Strong Microsoft Excel skills and proficiency with Outlook and Microsoft 365, • Experience calculating or tracking commissions, or similar compensation reconciliation work, is a plus, • Excellent attention to detail, organization, and follow-through, with the ability to manage many open items and deadlines at once, • Professional phone manner and clear written communication Preferred Qualifications • Experience in a specialty trade contractor environment (fire alarm, electrical, security, sprinkler, HVAC, or similar), • Familiarity with GC billing portals such as Textura, GCPay, or Procore, • Experience with field service management software (FieldHub or similar) and QuickBooks, • Knowledge of NJ sales tax rules for construction and service work, • Familiarity with the New Jersey Construction Lien Law, • Familiarity with NJ State Prevailing Wage Requirements and Certified Payroll a Huge Plus, • Associate's or bachelor's degree in accounting, business, or a related field Why Join BPS • Stable, family-owned company with 60+ years in business, • A role with direct impact on the company's success, • Supportive, small-team environment where your work is seen and valued, • Competitive pay and benefits How to Apply Submit your resume through ZipRecruiter. In your application, please briefly describe your experience with AIA progress billing and collections. Bergen Protective Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. \nCompany Description Bergen Protective Systems, Inc. is a family-owned life safety and electronic security systems company based in Englewood Cliffs, NJ, with over 60 years of experience serving commercial, industrial, and institutional clients throughout New Jersey and New York. We specialize in fire alarm systems, intrusion detection (burglar alarm) systems, access control, CCTV surveillance systems, and central station monitoring. Our team takes pride in delivering quality workmanship and attentive service on every project. Bergen Protective Systems, Inc. is a family-owned life safety and electronic security systems company based in Englewood Cliffs, NJ, with over 60 years of experience serving commercial, industrial, and institutional clients throughout New Jersey and New York. We specialize in fire alarm systems, intrusion detection (burglar alarm) systems, access control, CCTV surveillance systems, and central station monitoring. Our team takes pride in delivering quality workmanship and attentive service on every project.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security environments: Fire Alarm and/or Intrusion., • Current and valid state-required Physical Security and/or Life Safety license., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • NICET Level 2 certification or State-required licenses., • Knowledge of cabling infrastructure and conduit installation., • Ability to identify independent colors and learn color codes., • Experience with multiple Intrusion and Fire system manufacturers. Join our team and earn up to a $15,000 signing bonus based on experience and licenses, plus extra pay incentives for night shifts! Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Zūm: Zūm is revolutionizing mass mobility with its Connected Mobility Experience (Zūm CMX™) system that connects and coordinates people, vehicles, and operations in real time. In the $50 billion student mobility market – the largest segment of the mass mobility industry – Zūm CMX is transforming a daily source of anxiety and disruption into a reliable, transparent, and efficient mobility experience for students and families. Today, more than 6,500 schools rely on Zūm CMX. Recognized globally for its innovative approach and operational execution, Zūm has been named to Fast Company’s World’s Most Innovative Companies, CNBC Disruptor 50 and Changemakers, the World Economic Forum, and the Financial Times’ Fastest Growing Companies lists. Zūm is backed by leading investors including Sequoia Capital, GIC, TPG, and Softbank. About the Role We're seeking an experienced Shop Manager to lead maintenance operations at our Yonker, NY location. This role encompasses the complete maintenance lifecycle—from fleet intake and facility setup to daily shop management and continuous improvement. You'll build high-performing technician teams, manage maintenance budgets and KPIs, and establish best-in-class fleet operations that ensure maximum vehicle availability and safety compliance. You'll be the backbone of our transportation operations, ensuring every vehicle is safe, reliable, and ready to serve students and communities. What Makes You Successful in This Role You're a hands-on leader who thrives in the controlled chaos of a busy maintenance facility where priorities shift by the hour. You balance operational urgency with meticulous safety and compliance standards, never cutting corners on what matters most. You're a natural problem-solver who can diagnose both mechanical issues and operational inefficiencies with equal skill. You see potential in technicians and invest in their development, building teams that take pride in their work and own their outcomes. You're equally comfortable reviewing work orders and budget reports, troubleshooting a complex electrical issue with your team, or explaining fleet readiness metrics to district administrators. You take pride in running a tight ship—where tools are accounted for, documentation is impeccable, and buses roll out on time. ResponsibilitiesOperational Leadership & Fleet Readiness Execute complete shop start-ups for newly awarded contracts, including facility setup, tool and equipment procurement, parts inventory establishment, and fleet intake processes Develop and maintain preventive maintenance programs that meet or exceed state, federal, DOT, and district requirements Ensure maximum daily vehicle availability through strategic maintenance scheduling, efficient repair workflows, and proactive fleet health monitoring Manage shop operations to ensure consistency and excellence across all maintenance activities Partner with Location Manager to coordinate fleet readiness and support operational scheduling needs Performance Management & Safety Utilize Zum's fleet management systems to monitor, analyze, and exceed maintenance KPIs including PMI compliance, mean distance between failures, out-of-service time, and first-time fix rates Lead a safety-first maintenance culture that protects technicians, drivers, students, and the broader community Ensure complete compliance with FMCSA, DOT, CHP Motor Vehicle Safety Standards, ADA requirements, and all applicable federal and state regulations Maintain meticulous maintenance records, inspection documentation, and regulatory files ready for audit at all times Maintain maintenance budget accountability in alignment with company financial guidelines Team Development & Shop Operations Collaborate with Human Resources and Recruiting teams to strategize and execute hiring plans for technician positions that support operational needs Develop and coach maintenance technicians through mentoring, skills training, and career growth opportunities Oversee daily shop operations including work order management, parts inventory control, vendor relationships, and warranty claim processing Establish and adjust maintenance priorities based on operational demands, parts availability, and fleet requirements Maintain organized, safe, clean, and efficient shop facilities with proper tool control and hazardous materials management Qualifications Basic Qualifications: 5+ years of experience managing shop operations in a commercial repair environment such as fleet maintenance, diesel repair, heavy equipment service, trucking maintenance facilities, or similar settings where managing multiple concurrent repairs and minimizing vehicle downtime are essential 3+ years of experience directly supervising and managing a team of 3 or more technicians in a commercial fleet maintenance environment Fleet management and software proficiency - Experience utilizing fleet management software systems (such as Fleetio, Geotab, Samsara, Fleet Complete, Google Workspace/Microsoft Office Suite or similar platforms) to track vehicle maintenance schedules, manage work orders and parts inventory, generate reports, and handle daily communication and operational documentation Regulatory compliance experience – Demonstrated experience managing compliance with FMCSA and DOT requirements, including maintaining inspection records, driver qualification files, and maintenance documentation. Ability to speak to a time when you prepared for or underwent a State or Federal audit and ensured regulatory compliance across shop operations and fleet maintenance records Preferred Qualifications: Experience managing in a unionized (CBA) environment Demonstrated experience successfully managing through periods of rapid organizational growth or major management/structural changes Valid CDL license with ability to operate commercial fleet vehicles ASE certifications or manufacturer/dealer technical training credentials Knowledge of Federal DOT regulations and State/Local commercial vehicle compliance requirements Additional industry certifications (EPA 609, OSHA safety training, or specialized equipment certifications) The targeted base salary range for this role is listed in the compensation section below. Actual salary may be above or below this range based on factors such as location, skills, and relevant experience. In addition, this position may include additional compensation in the form of bonus, equity, or commissions. If you are a full-time salaried or hourly worker, we offer the following benefits: Medical, Dental, Vision, 401(k), Holidays, Wellness, Vacation, and more. The targeted pay range for this role in US: $110k - $125k Zūm Services, Inc. and all its subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Managing DirectorPort Chester | $150,000 - $160,000 base + performance-based profit shareEight years ago, Royal Comfort began as a one-man, one-truck operation. Our President poured everything into building the company into the industry leader it is today. Our success goes beyond HVAC systems; it is rooted in a fundamental belief that we cannot succeed without supporting the success of our employees, both personally and professionally.We have only begun to realize our full potential. While HVAC is our foundation today, our growth is positioning us to become the leading privately held HVAC, electrical, and plumbing company in the Northeast. To support that vision, we are seeking an experienced Managing Director to lead day-to-day operations with excellence, allowing our President to focus on continued expansion. If you are a driven leader who wants to step into a top role while continuing to grow, we invite you to join us as we build something exceptional together.Compensation: This is a salaried position with a $150,000 - $160,000 base + performance-based profit shareThe Mission: Run the kingdom today so we can build the empire tomorrow.Who You AreThe Seasoned Leader: You have a proven track record in home services (HVAC/Plumbing/Electrical) and understand the nuances of the trades.The Strategic Thinker: You can balance the "chaos" of a 7:30 am dispatch rush with long-term PandL management.The Culture Carrier: You lead with empathy and accountability. You understand that "we are nothing without our team."The Growth Specialist: You are excited by the prospect of adding Electrical and Plumbing to a thriving HVAC business.Work Schedule and Qualification RequirementsHours: 7:30 am - 4:30 pm Monday through Friday with overtime as needed.Job Experience: Previous GM or high-level Operations Management experience in the trades is required.Mindset: A "buck-stops-here" attitude with a focus on solutions, not excuses.Position Summary: As Managing Director, you are the heartbeat of our daily operations. You will work closely with our business coaches and the Founder to ensure our "Gold Standard" is met on every call.Operational Command: Oversee daily efficiency across management, technicians, and dispatch.Team Advocacy: Mentor and develop our staff, ensuring a culture where the employee truly matters.Growth Catalyst: Drive sales and maintenance agreement growth through data-backed strategies.Customer Guardianship: Maintain our reputation for outstanding satisfaction and handle escalations with grace.Why Royal Comfort?High-Growth Environment: Join a company on the rise where your career trajectory matches our expansion.Elite Organization: We aren't "winging it." Our systems and processes are designed for efficiency and your success.Family-First Culture: We are a close-knit team that values trust, respect, and collaboration.The "Legacy" Perks:Financial: 401(k) with up to 3.5% match + Performance-Based Profit Sharing.Health: Medical, Dental, Vision, and Short-Term Disability Insurance.Tools for Success: Company vehicle with a fuel card and ongoing professional training.Life Balance: 8 Paid Holidays, generous PTO, and a full kitchen/coffee bar at HQ.

Job Description At Crescent Hotels & Resorts, we are a team of hospitality professionals that are deeply connected to and proud of the exceptional experiences we provide for our guests. More than that, we know our Associates are the shining stars of what we do. We understand what it takes to be a part of something great. We will encourage you to bring your true self to work every day, we will celebrate you and we will cheer you on as you shine bright in your career journey. Whether it be our health and wellness programs, best in class learning and development or our travel discounts that feed your inner explorer, we work hard to create and deliver on what you need. We are ready for you to start your journey with us where You Belong. We Care. Shine Bright. We are looking for our next great team member to join us on our Engineering team. We are committed to providing you with: • Highly competitive wages, • An exceptional benefit plan for eligible associates and your family members, • 401K matching program for eligible associates, • Flexible scheduling to allow you to focus on what is important to you, • Discounts with our Crescent managed properties in North America for you and your family members, • Daily associate meals, • Paid time off and holiday pay, • Career growth and advancement opportunities Here is what you will be doing each day: As our Engineering Manager, you will lead and oversee the daily operations of the Engineering department to ensure the hotel’s building systems, equipment, and guest areas are maintained to the highest standards. You will manage preventive maintenance programs, oversee capital projects and repairs, ensure life safety compliance, and support all departments by maintaining a safe, efficient, and well maintained property for our guests and associates. You will supervise and develop the engineering team, coordinate with vendors and contractors, manage departmental budgets, and ensure compliance with brand standards and local regulations. Does this sound like you? You are a hands on leader with strong technical knowledge of HVAC, electrical, plumbing, and general building systems. You take pride in maintaining a safe and well functioning environment and understand how critical your role is to the overall guest experience. You are organized, responsive, and able to prioritize multiple projects while leading a team with accountability and respect. You are comfortable working a flexible schedule, including weekends or on call shifts when needed. Experience in hotel engineering or facilities management is required, along with strong leadership and problem solving skills. At Crescent Hotels & Resorts we strive to create a great place to work where associates at all levels of our organization are respected for their differences, just like the guests and owners we serve. That’s why we are dedicated to creating an environment that facilitates open and honest conversations about race, equity, diversity, and inclusion. By examining our own beliefs and behaviors, we can create change through training, recruiting, and promoting diverse talent to strengthen our culture. For applicants who will be working in NYC, the anticipated compensation range for the position is $90,000-$100,000 annually; for applicants who will be working in New York, the anticipated compensation range for the position is $90,000.00-100,000.00 annually. The salary offered to a successful candidate will be dependent on several factors that may include but are not limited to years of experience within the job, years of experience within the required industry, education, work location, etc. Crescent Hotels is a multi-state employer and the salary ranges indicated herein may not reflect positions that work only in other states.

Job Description Now Hiring - Start Immediately! First Student is hiring immediately for a Mechanic / Maintenance Technician II to join our team dedicated to safely transporting students in those iconic yellow buses. In this role, you'll play a critical part in keeping our fleet road-ready and dependable-supporting a safer ride for the children in our community. Why Join First Student? In addition to a supportive, safety-first culture and stable full-time work, we proudly offer: • Pay: $25.00/ hr, • ASE incentive of $0.25/hour for each relevant ASE obtained (We pay for study materials and exams!) • Full benefits package, including health, dental, vision, and 401(k) with company match, • Paid time off including holidays and vacation, • Annual tool & gear allowances - boots and prescription safety glasses, • Ongoing, state-of-the-art training programs to support your career growth, • PerkSpot discounts on cell phone plans, car purchases, and more! About the Position: As a Technician at First Student, your day-to-day work ensures our vehicles are maintained and safe for our passengers. You'll complete both routine and advanced repairs, handle emergency service calls, and work under moderate supervision. You may also provide mentorship to entry-level technicians. Key Responsibilities: • Perform maintenance and repairs on vehicles including:, • Brakes, suspensions, drivetrains, and transmissions, • Electrical components, fluid systems, filters, belts, batteries, and hoses, • Conduct preventive maintenance (PMs), DOT inspections, and diagnostic troubleshooting, • Maintain detailed service records, complete accurate work orders, and track parts usage, • Support emergency roadside service calls when needed, • Clean vehicles and maintain the shop environment, • Safely move vehicles around the yard or between work areas, • Repair and maintain shop tools and equipment, • Other duties as assigned by management What You Bring to the Role: You might be a perfect fit if you: • Want a job that directly supports your community, • Have 3+ of experience working with diesel, gas, electric, or CNG vehicles, • Are comfortable using hand tools and diagnostics software, • Are a strong problem solver who thrives both independently and on a team, • Have a valid driver's license and are willing to obtain a CDL (we'll help with training!), • Have or are willing to build a personal mechanic tool set, • Are eager to grow your skills through ASE testing (we'll support you every step of the way!) Preferred Qualifications: • High school diploma or GED (preferred), • Vocational or technical training in vehicle repair (preferred), • Class B CDL with passenger endorsement (or ability to obtain within 3 months), • ASE Certifications (preferred, with requirement to begin ASE testing within 1 year), • Experience performing DOT inspections and vehicle safety assessments, • Military experience, prior fleet maintenance, or previous bus/large vehicle repair a plus Working Conditions & Physical Requirements: • Maintenance shop environment with dust, dirt, grease, and various weather exposure, • Must be able to lift at least 50 lbs and work in crouched or prone positions beneath vehicles, • This is a safety-sensitive position and subject to DOT drug testing, including cannabis Get Your Career on the Road with First Student! We welcome applicants from all backgrounds-including those reentering the workforce, without a college degree, or with military experience. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job DescriptionLead Home Service Technician / Handyman This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You’ll Do ●Perform high-quality home maintenance and repair projects ●Lead, coach, and support a team of Tru-Pro® technicians ●Uphold TruBlue’s high standard of professionalism, reliability, and customer care ●Communicate clearly with customers and help manage expectations on-site ●Ensure safety, accuracy, and consistency across every project Common projects include: ●Bathroom and kitchen upgrades ●Drywall repair and patching ●Flooring installation and repair ●General carpentry ●Interior and exterior painting ●Basic plumbing and electrical (within scope) Who You Are ●10+ years of hands-on home repair or construction experience ●Experience managing or mentoring other technicians is preferred ●Strong communication and problem-solving skills ●Committed to doing the job right and doing right by your team and clients ●Valid driver’s license, reliable transportation, and full toolset ●Fluent in English and legally authorized to work in the U.S. What You’ll Get ●Year-round, consistent work ●Reliable hours and flexible scheduling ●Company vehicle and TruBlue gear (varies by location) ●Strong office and leadership support ●A team culture built on compassion, trust, and professionalism ●A leadership role with room to grow Why TruBlue We’re a company with a purpose: to make homes safer and lives easier. You’ll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. Powered by JazzHR Jyih1sYJS3

Job Description Now Hiring - Start Immediately! First Student is hiring immediately for a Mechanic / Maintenance Technician II to join our team dedicated to safely transporting students in those iconic yellow buses. In this role, you'll play a critical part in keeping our fleet road-ready and dependable-supporting a safer ride for the children in our community. Why Join First Student? In addition to a supportive, safety-first culture and stable full-time work, we proudly offer: • Pay: $21.00/ hr, • ASE incentive of $0.25/hour for each relevant ASE obtained (We pay for study materials and exams!) • Full benefits package, including health, dental, vision, and 401(k) with company match, • Paid time off including holidays and vacation, • Annual tool & gear allowances - boots and prescription safety glasses, • Ongoing, state-of-the-art training programs to support your career growth, • PerkSpot discounts on cell phone plans, car purchases, and more! About the Position: As a Technician at First Student, your day-to-day work ensures our vehicles are maintained and safe for our passengers. You'll complete both routine and advanced repairs, handle emergency service calls, and work under moderate supervision. You may also provide mentorship to entry-level technicians. Key Responsibilities: • Perform maintenance and repairs on vehicles including:, • Brakes, suspensions, drivetrains, and transmissions, • Electrical components, fluid systems, filters, belts, batteries, and hoses, • Conduct preventive maintenance (PMs), DOT inspections, and diagnostic troubleshooting, • Maintain detailed service records, complete accurate work orders, and track parts usage, • Support emergency roadside service calls when needed, • Clean vehicles and maintain the shop environment, • Safely move vehicles around the yard or between work areas, • Repair and maintain shop tools and equipment, • Other duties as assigned by management What You Bring to the Role: You might be a perfect fit if you: • Want a job that directly supports your community, • Have 1+ years of experience working with diesel, gas, electric, or CNG vehicles, • Are comfortable using hand tools and diagnostics software, • Are a strong problem solver who thrives both independently and on a team, • Have a valid driver's license and are willing to obtain a CDL (we'll help with training!), • Have or are willing to build a personal mechanic tool set, • Are eager to grow your skills through ASE testing (we'll support you every step of the way!) Preferred Qualifications: • High school diploma or GED (preferred), • Vocational or technical training in vehicle repair (preferred), • Class B CDL with passenger endorsement (or ability to obtain within 3 months), • ASE Certifications (preferred, with requirement to begin ASE testing within 1 year), • Experience performing DOT inspections and vehicle safety assessments, • Military experience, prior fleet maintenance, or previous bus/large vehicle repair a plus Working Conditions & Physical Requirements: • Maintenance shop environment with dust, dirt, grease, and various weather exposure, • Must be able to lift at least 50 lbs and work in crouched or prone positions beneath vehicles, • This is a safety-sensitive position and subject to DOT drug testing, including cannabis Get Your Career on the Road with First Student! We welcome applicants from all backgrounds-including those reentering the workforce, without a college degree, or with military experience. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Please note; this role is based in Mount Vernon! Job Summary Miller Proctor Nickolas (MPN) is a premier leader in the industrial boiler market. We are seeking a high-caliber Technical Sales Engineer to drive our Aftermarket Parts and Service division. This is not a "catalog sales" role; it is a complex, solutions-based position requiring a BS in Engineering and the ability to design sophisticated service solutions that go beyond the client’s initial request. You will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. If you are a self-starter who thrives on technical problem-solving, value-based selling, and managing high-stakes industrial accounts, you belong at MPN. Key Responsibilities • Technical Solution Design: Evaluate field service opportunities and design complex mechanical/electrical service solutions. You must be able to read mechanical drawings and wiring diagrams to quote accurate repairs and upgrades., • Rapid Response Quoting: Support our field technicians and boiler cleaning teams by providing rapid, manufacturer-authorized quotes while they are on-site., • Value-Based Selling: Navigate long-term sales cycles by focusing on the "Total Cost of Ownership," ensuring clients understand the value of a premium MPN solution., • Account & Contract Management: Prospect new clients and manage existing accounts, including the negotiation of complex service contracts and maintenance agreements., • Full-Cycle Ownership: From receiving the lead to placing the PO with suppliers and coordinating with the Service Scheduling team, you own the project’s administrative and financial integrity., • Project Handoff: Identify and forward new boiler sales opportunities to the capital equipment team while coordinating larger projects with internal Project Management. Qualifications • Education: BS Degree in Engineering or Engineering Technology is required., • Experience: Minimum of 2 years in industrial technical sales. Prior experience with boiler systems or aftermarket industrial products is highly preferred., • Technical Literacy: Proven ability to interpret mechanical drawings, electrical wiring, and technical specifications., • Systems Proficiency: Strong experience with CRM platforms (HubSpot preferred) and MS Office (Excel/Word)., • Financial Acumen: Experience in industrial estimating, billing, and protecting profit margins, • Soft Skills: Customer-centric problem solver, excellent time-management, and the ability to work independently with no handholding. Why Join Miller Proctor Nickolas? • Reputation: Represent a manufacture’s authorized leader in the boiler industry., • Autonomy: Manage your own territory and accounts with the backing of a world-class field service team., • Compensation: Competitive base salary plus a commission structure designed for high-achievers., • Stability: Work in a critical industrial sector with a company known for excellence since 1957.\nCompany Description Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members. Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description TITLE: BUSINESS ANALYST DEPARTMENT: INFORMATION TECHNOLOGY REPORTS TO: DIRECTOR, IT FLSA STATUS: EXEMPT JOB DESCRIPTION REVISION: 8/11/26 BASIC FUNCTIONS The Business Analyst is responsible for bridging the gap between business objectives and technology solutions by analyzing processes, gathering requirements, and translating stakeholder needs into actionable project deliverables. This role is critical to ensuring that IT initiatives align with organizational goals, drive operational efficiency, and support compliance with relevant standards and frameworks. The Business Analyst serves as a liaison between business units and IT, facilitating communication, documenting requirements, and supporting project management efforts to deliver value-driven outcomes. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES ERP System Support & Optimization • Serve as primary liaison between business stakeholders and IT for EPDS and future ERP system requirements., • Analyze, document, and validate business processes to ensure ERP solutions align with operational needs and compliance standards., • Develop and maintain functional specifications, process flows, and user stories for ERP enhancements and new implementations., • Coordinate and execute user acceptance testing (UAT), ensuring system changes meet business objectives and regulatory requirements., • Monitor ERP system performance, identify gaps, and recommend improvements for efficiency, data integrity, and user experience. Continuous Improvement & Future Planning • Evaluate emerging ERP technologies and participate in planning for future system selection, implementation, and integration., • Collaborate with cross-functional teams to align ERP strategy with business goals and regulatory requirements. Documentation, Change & Governance • Maintain detailed process diagrams, and SOPs, • Enforce strict change management aligned with risk, impact, and rollback planning, • Ensure all ERP changes meet audit and compliance traceability requirements STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices.” METRICS AND MEASURABLES Open Issues for IT Help Desk • Waiting for 3rd Party: Actively reviewed with Management to ensure relevance and appropriate priority., • Waiting for Customer: Target fewer than 15., • Waiting for Support: Target fewer than 10., • Adhere to all business‑defined SLAs for ticket handling. Adherence to Change Management Policies and Procedures • Changes should be executed with minimal impact to business operations., • Communication, backup, recovery planning, and risk assessment must be thoroughly evaluated and completed. Project-Related Work • Complete assigned project tasks within established deadlines., • Provide clear and timely communication regarding project status. Compliance • Maintain compliance with all required regulations, including NIST 800‑171, CMMC and related frameworks. EDUCATION / EXPERIENCE / COMPENTENCY Required • Bachelor’s degree or equivalent experience (2+ years in Business Analyst role), • Strong communication skills Preferred • Experience supporting EPDS or IFS ERP platforms, • Strong communication skills Certifications (Preferred) • Project Management Professional, • Business Analysis Professional PHYSICAL REQUIREMENTS (On-Prem Component) • Ability to lift and rack equipment (up to ~50 lbs), • Hands-on work in data centers/server rooms (cabling, rack/stack), • Availability for after-hours maintenance windows and incident response, • Occasional travel between sites TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN BLUE RAVEN’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job DescriptionCompany Description WHO WE ARE Equinox is a category of one, setting the global standard for luxury health, wellness, and hospitality. Our spaces are intentionally elevated, our standards uncompromising, and our expectations high. We attract people who take pride in excellence, care deeply about quality, and want to be part of something that feels different the moment you walk through the door. We are builders, operators, and innovators who believe great environments and meaningful human connection change lives. Diversity, belonging, and ownership aren’t slogans here, they’re how we work. At Equinox, colleagues don’t just support the business; they shape the future of wellness. Because for us, it’s not fitness. It’s life. WHAT WE DO We create premium, immersive experiences where performance, hospitality, design, and human connection converge—and every detail matters. This is not a traditional fitness environment. It is a place where high standards, accountability, and pride in craft define the work. Fueled by an entrepreneurial mindset, we trust our people with real responsibility and real impact. Growth is earned through action, learning is hands‑on, and careers are built by those who want to operate at the highest level. At Equinox, we don’t just offer opportunities—we offer long‑term pathways for people who want to do meaningful work in an environment that expects more and delivers more. Job Description We are looking for an energetic, creative, and reliable Housekeeping Manager to join the Equinox team. This is a great position for a candidate looking to make a significant impact in a growing and dynamic organization. The main purpose of this position is to supervise the maintenance staff and operations of all activities related to club maintenance and to ensure that the club consistently meets Equinox’s standards for cleanliness and safety. Job responsibilities include but are not limited to the following: • Contribute to and consistently apply Equinox’s policies and procedures, • Hire, train, supervise, coach and evaluate maintenance staff, • Develop employees with potential Maintenance Supervisor capabilities, • Conduct performance evaluations on annual anniversary date, • Perform 30, 60, & 90-day review on all new hires, • Require Manager on Duty’s ("MOD") to attend monthly facility reviews, • Train all new staff with the customized, club-specific cleaning checklists, • Complete cleanliness inspections (walk-through), • Perform daily one-on-one meetings with each shift MOD’s, • Report to the AGM daily for open tasks, • Ensure adequate inventory of maintenance and locker room supplies, • Conduct frequent walkthroughs, • Implement inclement weather procedures, • Oversee deliveries, • Be aware and knowledgeable of emergency procedures, • Attend Manager meetings, • Maintain high visibility during peak club hours, • Ensure high level of customer service, • Keep current in knowledge of key competitors as to their location, physical plant, and equipment, • Assist in the development of annual budget with respect to the Maintenance Department, • Perform all other projects and responsibilities as required Pay Transparency: $65,000-70,000 Qualifications To perform this job successfully, an individual should meet the following minimum requirements and qualifications: • Proven experience in a commercial business or fitness setting, • Proven ability to hire, direct, and train staff, • Knowledge in maintenance of mechanical, electrical, and exercise equipment, • Knowledge and experience with tools, • Knowledge and experience with janitorial cleaning products and OSHA standards, • Current C.P.R. and First Aid Certification, • Good financial management, • Ability to utilize new techniques, ideas and solve problems, • Possess honesty and personal integrity, • Hardworking and diligent, • Must have sense of urgency around all work details, • Bi-lingual in English and Spanish preferred Additional Information AS A MEMBER OF THE EQUINOX TEAM YOU WILL RECEIVE: • We offer competitive salary, benefits, and industry leading commission opportunities for club employees, • Complimentary Club membership, • Perks and incentives with our products and services including Personal Training, Pilates, Spa and Shop This job description is intended to describe the general requirements for the position. It is not a complete statement of duties, responsibilities, or requirements. Other duties not listed here may be assigned as necessary to ensure the proper operations of the department. Equinox is an equal opportunity employer. For more information regarding our career opportunities, please visit one of our clubs or our website at https://careers.equinox.com/ All your information will be kept confidential according to EEO guidelines. Must have a legal right to work in the United States.

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description Gregory's Coffee is looking to hire an amazing Area Leader to join our team! This position will support locations in Westchester, NY and Connecticut. Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. Job Description & Responsibilities Gregorys Coffee, as a company, is focused on quality, service, presentation and efficiency. We strive for excellence in each of these focus areas, thus providing a premier experience for every guest who visits Gregorys. District Leaders will oversee a territory of Gregorys Coffee locations, ensuring these high standards are always being achieved. District Leaders will accomplish this by supporting their territory’s Store Leaders, setting goals, and working alongside their teams to achieve these goals. In addition they will push all stores to continually improve in all facets of the business. People Development Ensure new hires/transfers are onboarded properly to the store and thoroughly acclimated in operational, service, and knowledge functions Ensure teams are upholding our high standards by conducting evaluations and thorough observations Engage with all levels of the team and have a firm understanding of specific coaching and development needs Provide continuing education to every member of your team, driving superior coffee, food, and service knowledge Identify and work with high potential talent that can be developed into our next great leaders Actively recruit and maintain a deep bench of candidates to tap into when staffing needs arise Pro-actively hire staff ahead of new store openings and identify internal talent/transfers to ensure smooth new store openings Host monthly all Store Leader meetings to cover new initiatives, opportunities, and performance. Work with COO to craft appropriate agenda and motivational messages Coffee and Food Standards Be the foremost expert in everything coffee, including origin concepts, brew methods and techniques, our specific coffee program as well as technical considerations. Be able to teach and hold accountable the aforementioned to all team members across your entire district In partnership with your teams, lead coffee tastings (instore and out of store experiences) and build our reputation as coffee experts one cup at a time Lead coffee training during new roll outs or changes to our blends to ensure the highest expertise in each of our team members Properly test and maintain coffee equipment to ensure every single cup of coffee is at the highest standard Regularly taste test all items across our menu for quality and consistency and be able to accurately adjust when necessary Regularly spot check competitors and have an understanding of trends, ideas, and concepts that may provide menu or operational opportunities for us to explore Ensure all new training and rollouts are completed by 100% of teams, and provide actionable feedback to the Training department for future rollouts Operational Standards Ensure all existing and new operational standards are being executed as planned Train teams on new menu and operational roll outs Ensure all stores are upholding Department of Health standards and are always well prepared to handle an inspection at any time Ensure quality standards are met by checking for taste, FIFO rotation, and visual appeal Ensure stores are kept immaculately clean, organized, and well merchandised at all times Ensure stores are adequately staffed at the appropriate times using data and intuition to guide your decisions Service Standards Work side by side with teams to lead by example in 5-star service Coach teams to have a guest-first mentality at all times regardless of side-duty tasks that need to be completed Proactively manage customer concerns/issues and coach teams on how to do the same Become the “Mayor” of your store group and know a significant amount of customers in each of your stores Collect customer business cards/email addresses to build a database that you can promote grass-roots marketing efforts towards to drive loyal business Minimize guest complaints and respond to all Yelp/Google/App/Email comments and go above and beyond for both positive and negative reviews. Facilities & Maintenance Proactively clean, service, and maintain all equipment in each of your stores, partnering with the appropriate service techs when necessary Ensure every store is properly maintained and prepared to pass health inspections at any moment Hold monthly meetings with clear deep cleaning tasks to be accomplished Quickly react to any major plumbing, electrical, HVAC, equipment, or other facility concerns that can severely impact business Proactively organize and clean out store clutter on a regular basis to ensure facilities are easier to maintain and manage. Suggest and execute functional changes to store equipment layout that will positively impact service, sales, and/or customer experience. Properly back up these suggestions with data and analysis to justify any related expenses HR Management Ensure teams are compliant with employee labor laws Ensure changes to labor laws are thoroughly communicated and enacted Proactively manage employee issues by having regular conversations with every employee on your teams When necessary, deliver coaching conversations, warnings, and terminations with sufficient evidence and documentation that protects the business and the employee’s experience Financial Performance Working with the Exec team, set and closely manage each of your store’s controllable profit areas: sales, labor, and COGS Work closely with your teams to build customer relationships and seek out revenue drivers outside of the 4-walls of the store Work closely with your teams to build efficient schedules based on the needs of the business, using data to drive your decisions Manage weekly payroll reconciliation ensuring hours and tip distribution are 100% accurate Manage cash handling responsibilities including cash drawer counts, safe reconciliation, and bank deposits. Investigate and manage any issues that arise. Actively monitor inventory/waste levels and ordering activity to ensure your locations have sufficient product for service without exceeding their COGS targets Ensure monthly inventory counts are completed and submitted accurately Actively engage with your customer base, neighborhood influencers, and other locals to drive future business and enhance our reputation ensuring successful financial performance over the long term Additional Expectations This is a hands-on role and an Area Leader is expected to work alongside their teams to drive revenue, efficiency, and profitability. Setting and leading by example is what will drive your success An Area Leader is expected to use their best judgement to actively be in their stores based on the needs of the business and the development of their people. This includes active oversight on early mornings, nights, weekends, and holidays. Regular communication with the Exec team and their District Leader is expected to keep the team aware of the state of your businesses and proactive solutions you are providing Actively embody the 12 Leadership Principles and live them out each and everyday with your teams Attend company events and proactively encourage team members to attend as well We use eVerify to confirm U.S. Employment eligibility.

Job Description Maintenance Supervisor - New Acquisition Coming Soon! Location: White Plains, NY Salary Range: $100k, plus bonus Schedule: Monday - Friday, 8-5pm; on-call as needed $2000 ONE TIME SIGN ON BONUS Pantzer is proud to be a 2026 NAA Top Employer Award Winner At Pantzer, we believe in supporting professional growth, channeling expertise into action, and creating purpose and value in our communities on every level. An award-winning company with a solid history of success; we are seeking individuals who want to join us as we grow and expand our mission of delivering exceptional residential experiences. Primary Responsibilities for the Maintenance Supervisor: • Overseeing onsite maintenance team, • Working closely with Property Manager and onsite management team, • Providing leadership and guidance to foster a productive team environment and achieve property maintenance goals, • Providing effective training to new maintenance staff members, • Delivering professional, quality services to residents and responding to service requests in a timely manner, • Adhering to all applicable codes and standards and ensuring compliance with all safety protocols., • Providing effective maintenance management throughout all areas of the property, • Controlling inventory, ordering and delivery of approved supplies and equipment, • Performing various community maintenance services relating to plumbing repair, appliance repair, minor electrical repairs, HVAC troubleshooting and repairs, • Managing apartment turnover process for efficient resident move-ins, • Completing all required inspections, • Establishing effective relationships with vendors and partners to maximize quality of service to residents and meet budgeting objectives, • Managing staffing schedule to ensure 24/7 emergency coverage The Property - Details Coming Soon! What We’re Looking for in a Maintenance Supervisor Candidate: • Must live within 30 minutes of the property if on-call is required, • Valid driver's license required, • Must be HVAC certified, • Must be able to read and communicate effectively in English, both verbally and in writing, • Great people skills and a desire to provide residents an exceptional residential experience through superior in-person service and quality maintenance management, • Thoughtful leadership skills to foster a supportive and productive onsite team environment, • A minimum of 1 to 3 years of leadership experience as a Maintenance Supervisor, • A strong working knowledge of all aspects of multi-family property maintenance, • HVAC experience and certification or willingness to obtain, • Proven experience managing staff and multiple projects, • Experience with working in various digital platforms including Microsoft Office Suite and various industry-related software platforms., • Knowledge of relevant local, state, and federal codes and regulations., • Ability to maintain a “can do” attitude to ensure the property’s success, • Willingness to work weekends/holidays in an emergency situation, • Successful completion of required background and drug screening prior to start of employment What We Offer: • Comprehensive Benefits including Medical, Dental, Vision, Life and Disability Insurance, • Health Savings & Flexible Spending Accounts including HSA, Health Care FSA and Dependent Care FSA, • 401(k) with Company Match after just 2 months of service, • Generous Paid Time Off starting with 17 PTO days, plus 2 Floating Holidays and 7 Company Paid Holidays, with additional PTO based on tenure, • Paid Parental and Maternity Leave, • Additional Financial Protection through Critical Illness, Accident and Hospital Indemnity coverage, • Employee Support & Lifestyle Benefits including EAP, Legal Plans, Pretax Commuter Benefits, Allstate Identity Protection and Pet Insurance, • Onsite Housing Discount subject to apartment availability, • Monthly Leasing & Renewal Commissions with additional earning potential (this will VARY based on positions) #HP

Job DescriptionJoin LaundryLux Laundrylux is the North American supplier of Electrolux Professional & Wascomat equipment for Laundromats, Coin Laundries & On-Premises Laundries. From financing to repairs, Laundrylux provides a comprehensive set of services to help with all elements of commercial laundry. Warehouse Associate What we are looking for: The Warehouse Associate is responsible for the accurate and timely shipment of machines, parts, equipment, and products to customers. Additionally you will responsible for receipt, storage, organization or products delivered into the warehouse. Before we continue to dive into the requirements for the role let’s talk about Why you should join LaundryLux? Career Advancement: We offer a career, not just a job. We invest in the personal and professional growth of every employee because we believe growth leads to both business impact and personal fulfillment. Learning and Development: We foster a culture that encourages and promotes professional growth and development, with continuous learning Diversity Initiatives: We are proud to have launched the Women’s Initiative focused on building a better workplace for women, providing support, and recognizing the talented women within our company. LaundryLux Benefits: We offer a comprehensive benefits package including: Health benefits package including medical, dental & vision plans Life Insurance 401(k) with company matching Paid Time Off Paid Holidays Profit Sharing Employee Referral Program Mentorship Program Company Sponsored Training Tuition Reimbursement Back to the role: What you will do: Pick and pack materials for shipping based on customer orders, material queues, Bills of Ladings, and job material lists. Receive and ship merchandise. Check in merchandise by recording amounts via appropriate computer program. Move materials from receiving area or storage areas to shipping area or other designated areas. Get shipping quotes and create shipping labels. Assist on the cycle count and physical inventory process May be assigned facilities maintenance duties as needed Keep the building and exterior of building clean i.e., sweep, dust, mop, shovel, throw salt. Keep warehouse and work area organized and orderly. This position may be required to perform some simple installation of parts (coin-drops, face plates and coin-boxes) in machines on a shop floor using mechanical and electrical tools. Perform other duties/projects as assigned What you should have: Strong communication and interpersonal skills. Deadline-driven with effective time management skills. Knowledge of computers and software applications Experience using shipping software platforms such as UPS and Fed Ex Proficiency with Excel a plus Knowledge of scanners and handheld devices is helpful. Ability to prioritize Attention to detail Strong problem-solving skills Procedural mindset Organized and logical, willing to adapt quickly to changing policies and procedures Hardworking, dependable, punctual, and willing to learn new skills and tasks. Able to work well both independently and as part of a team, with strong organizational skills. Ability to thrive in a fast-paced environment Knowledge of scanners and handheld devices is helpful. Knowledge of computers and relevant software applications Ability to work with mechanical and electrical tools. Education and Experience: Past warehouse pick and pack experience is required Previous experience with electric pallet jack and or forklift preferred Knowledge with UPS/FedEx/DHL High school diploma or GED required Our Values: People, Share Responsibility, Integrity, Excellence, Customer Focused, Meaningfulness and Fun If you are looking for your next challenge, then this is your chance to join our team of exceptionally talented, creative and innovative professionals. We want you! We are an equal opportunity employer and we are committed to providing reasonable accommodations to individuals with disabilities in all aspects of the employment process. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Our company participates in E-Verify.

Metric Geo has partnered with a leading contractor in New York. Our client's purpose is to redefine the boundaries of ambition. They believe in creating places that are responsible, bringing transformative impact to their people, communities, and societies across the region. Within their business, they combine leading-edge practical expertise with project delivery consultancy to unlock the potential in every project. The Project As part of a delivery partner joint venture, we've been selected as the client's partner of choice to support a major transit authority across a large-scale rail infrastructure program. This is one of the busiest rail connections in the region, and the program will improve the capacity, reliability, and resiliency of commuter and intercity rail transit serving a high volume of daily passengers. Backed by substantial public funding, it stands as one of the largest investments in a mass transit project in modern history. You'll Be Responsible For • Providing project scoping, design, and construction phase supervision for a large transit program in New York City., • Applying your knowledge of project controls, including cost and schedule management methods specific to the transit industry., • Collaborating with the lead estimator and cost estimating team to develop accurate estimates for components of the transit program, including civil, structural, architectural, electrical, mechanical, track, utilities, maintenance and storage facilities, signal and communications systems, bus depot facilities, and wayside power facilities., • Leading a team preparing estimates and cost planning for a portfolio and/or projects., • Driving measurement exercises, including preparation of schedules of quantities., • Developing strategic review of prospects and fact-finding on key related elements., • Managing benchmarking exercises to test the estimate., • Overseeing quality assurance of estimates to ensure they're fit for purpose., • Presenting the estimate to key stakeholders, demonstrating full understanding of the project. You'll Need to Have • 10 years of experience in construction estimating on complex infrastructure or tunnel projects., • Bachelor's degree in civil engineering, Construction Management, or a related field., • Proficiency in cost estimating methodologies and techniques., • Knowledge of New York City construction trade union rates and rules., • Experience preparing detailed cost estimates for MEP (Mechanical, Electrical, Plumbing), civil, structural, or architectural construction projects., • Strong ability to produce high-quality materials within tight timeframes and manage multiple assignments. If this sounds like a good fit for you, get in touch today!

The Maintenance Worker provides janitorial and cleaning services of all common areas at the designated location. One year relevant experience maintenance experience required including plumbing, electrical, rough carpentry and floor finish.

Job DescriptionJOB DESCRIPTION JOB TITLE: MAINTENANCE MECHANIC DIVISION: SERVICES FLSA: NON-EXEMPT REPORTS TO: MAINTENANCE SUPERVISOR LOCATION: WESTCHESTER SALARY: $18.00 P/H - $22.00 P/H SUMMARY: Performs all necessary repairs to plumbing, electrical, HVAC, carpentry fields. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. DUTIES & RESPONSIBILITIES: • Troubleshoots and repairs all HVAC needs such as replacing filters in room units, central heating and A/C units, performs preventative maintenance and cleans all room HVAC units, • Makes repairs to damaged sheetrock, plaster and sands and paints as necessary, • Repairs or replaces doors and locks, • Repairs any client damage to rooms, furniture or room fixtures, • Completes preventative maintenance checklists as directed by Supervisor, • Escorts outside contractors, inspectors and other visitors as needed, • In the absences of lead maintenance person, accepts and verifies deliveries and gives receipts to Facility Manager, • Troubleshoots and repairs electrical outlets, switches, light fixtures, • Troubleshoots and repairs all plumbing washers and seats, drain lines, sinks, tubs and toilets. Clear stoppages, • May assist as needed with transfers or packing and storing of residents’ belongings, • Requires off hours response, • Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years related work experience necessary. Must be able to lift push or pull at least 60 lbs. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards.

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE \n \n \n Join Our Community of Food People! \n BASIC PURPOSE \n \nTo provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment.\n \n \n COME WORK FOR US FOODS®! \n Ready to build a career with a company that’s leading the foodservice industry? \n \n We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. \n \n Schedule: \n Sunday - Thursday Nights \n 3:00 PM - 11:30 PM OT Available, not required \n Pay range is $39 - $42 hourly based on certifications and experience. \n \n Excellent Benefits starting DAY ONE! Including: \n\n • \n $250 Quarterly tool allowance, that's $1,000 extra per year! \n • \n Low-cost Medical, Dental, and Vision for Family Coverage. \n • \n Paid vacation time, sick, and personal time. \n • \n Employee uniforms provided. \n • \n Employee referral program. $1,000 per referral \n • \n 401K with FANTASTIC company match! \n • \n Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! \n\n \n Basic Purpose: Independently troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). \n \n ESSENTIAL DUTIES AND RESPONSIBILITIES \n\n • \n Perform preventative maintenance within company standards. \n • \n Complete documentation of all repair orders, PM list and parts accountability. \n • \n Handle road service calls; perform road rescue/transport equipment as needed. \n • \n Keep track of assigned repairs by logging in and out of the software system. \n • \n Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. \n • \n Maintain inventory and proper recordkeeping. \n • \n Backup to other maintenance shop personnel. \n • \n Willingness and capacity to assume increased responsibility and Certifications. \n • \n Performs other duties as assigned. \n\n \n MINIMUM QUALIFICATIONS: \n\n • \n Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. \n • \n Diagnostic and troubleshooting ability using fleet maintenance software. \n • \n Successfully demonstrated independent analytical and problem-solving skills. \n • \n Must furnish own personal hand tools. \n • \n Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. \n • \n Ability to read and understand technical and service manuals. \n • \n Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. \n • \n Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. \n • \n Ability to adapt to changing organizational and operational needs. \n • \n Computer and software experience. \n • \n High school diploma or equivalent required. \n • \n Must possess a valid driver's license. \n\n \n PREFERRED QUALIFICATIONS: \n\n • \n JPRO software experience. \n • \n Welding ability \n • \n Knowledge with electrical schematics \n • \n Basic Microsoft Excel and Word skills. \n • \n Leadership experience or qualifications \n • \n Valid Class A CDL license and DOT certification \n • \n EPA 608 (Type 2 or Universal) certification \n\n \n Physical Requirements: \n JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally \n 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) \n 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) \n 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) \n 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) \n 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) \n \n Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $39 and $42. This role may also receive overtime compensation and shift differential where applicable. \n Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html. \n \n #LI-ED1 \n \n \n *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job Description Field Technician (Full-Time) Join a team where your technical expertise makes a real impact. We are seeking a hands-on Field Technician to install, maintain, troubleshoot, and repair industrial boiler and water treatment equipment while delivering exceptional customer service. This is an excellent opportunity for someone who enjoys solving mechanical and electrical challenges, working independently, and building strong relationships with customers. In this role, you will perform preventative maintenance, inspect and repair boiler room equipment, conduct water quality analysis, troubleshoot system issues, and document service activities. You'll also recommend equipment improvements, support installation projects, maintain service vehicle inventory, and ensure all work is completed safely and efficiently. Qualifications: High school diploma or GED required Mechanical and electrical troubleshooting experience; technical training or engineering degree is a plus Experience using hand tools and performing field service or maintenance work Proficiency with Microsoft Office and electronic service documentation Strong communication and customer service skills Self-motivated with the ability to work independently and as part of a team Professional attitude with a strong commitment to safety and quality Valid driver's license and willingness to travel to customer sites Flexibility to work varying schedules as needed If you enjoy hands-on technical work, take pride in delivering outstanding customer service, and want to grow your career with a company that values safety, teamwork, and continuous learning, we'd love to hear from you.

Job Description Overview Opportunity: Maintenance Technician Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Your Growth Path Engineer - Engineering Supervisor - Chief Engineer Your Focus • Assist with preventative maintenance and complete work orders related to replacing and repairing ceiling tiles, sheet-rock and wallpaper., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Replace basic electrical fixtures, light switches, receptacles, light bulbs and fixtures., • Perform minor plumbing functions., • Focus on guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Follow Service Recovery Guidelines., • Maintain the curb appeal including but not limited to snow removal, lawn care, gardening and trash removal., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Perform other duties as requested by management. Your Background and Skills • High School diploma and Trade school course work in related field preferred., • Previous maintenance experience or equivalent training required. Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It

Job Description Facilities Maintenance Technician Staffing Network Location: JFK Airport Area, Inwood, NY 11096 Schedule: Monday-Friday, 8:00 AM - 4:30 PM (flexibility required) Pay Rate: $29.00 - $32.50HR Position Overview Staffing Network is seeking a skilled Facilities Maintenance Technician to support a busy 24/7 facility operation near JFK Airport. This role is responsible for maintaining building systems, performing repairs, supporting facility operations, and ensuring equipment and grounds remain in excellent condition. The ideal candidate is self-motivated, dependable, and able to prioritize multiple maintenance needs. Based on the provided job requirements. Key Responsibilities • Perform general building maintenance and repairs., • Repair and maintain drywall, paint, ceilings, flooring, doors, and hardware., • Troubleshoot and repair plumbing systems including sinks, toilets, urinals, drains, and valves., • Conduct preventive maintenance on facility equipment and systems., • Perform HVAC maintenance and repairs, including air conditioning units, exhaust fans, filters, boilers, and controls., • Conduct electrical repairs including lighting, switches, receptacles, motors, and circuits., • Complete daily facility inspections and report maintenance issues., • Coordinate and oversee contractors to ensure safe, quality work., • Manage work orders, maintenance inventories, and purchase requests., • Assist with office and furniture moves and facility reconfigurations., • Support exterior maintenance including roofing, fencing, signage, irrigation systems, and siding. Required Qualifications, • High School Diploma or GED., • Minimum of 2 years of recent facilities, building maintenance, apartment maintenance, or related experience., • Working knowledge of electrical and plumbing systems., • Strong troubleshooting and problem-solving skills., • Ability to work independently and prioritize tasks., • Strong written and verbal communication skills., • Ability to obtain Airport Authority and Customs badges as required., • Welding knowledge and ability to pass welding testing., • Experience working in commercial kitchens or food production environments. (preferred), • HVAC experience. (preferred), • Sheet metal experience. (preferred)Physical Requirements, • Ability to lift up to 25 lbs. and move up to 75 lbs., • Ability to stand, walk, bend, and perform physical work throughout the day., • Ability to work outdoors approximately 50% of the time., • Comfortable working at heights up to 50 feet. What We're Looking For, • Maintenance workers with strong facilities or apartment maintenance backgrounds., • Individuals who thrive in a fast-paced environment and can support overflow maintenance needs., • Team players who are safety-focused, detail-oriented, and customer-service driven. Apply Today! If you have hands-on maintenance experience and are ready to join a dynamic facilities team, Staffing Network wants to hear from you. Submit your resume today for immediate consideration. #ZRDFW

Job Description Maintenance Technician - New Acquisition Coming Soon! Location: White Plains, NY Salary Range: $62k - $70k Schedule: Monday - Friday, 8-5pm; on-call rotation required $2000 ONE TIME SIGN ON BONUS Pantzer is proud to be a 2026 NAA Top Employer Award Winner At Pantzer, we believe in supporting professional growth, channeling expertise into action, and creating purpose and value in our communities on every level. An award-winning company with a solid history of success; we are seeking individuals who want to join us as we grow and expand our mission of delivering exceptional residential experiences. Primary Responsibilities for the Maintenance Technician: • Providing effective maintenance throughout all areas of the property, • Working closely with Property Manager, Maintenance Supervisor, and on-site management team to deliver top quality service to residents, • Delivering professional, quality services to residents and responding to service requests in a timely manner, • Adhering to all applicable safety codes/standards and ensuring compliance with all safety protocols, • Effective completion of apartment turnover process for efficient resident move-ins, • Performing various community maintenance services relating to plumbing repair, appliance repair, minor electrical repairs, HVAC troubleshooting and repairs, • Operating various hand tools and power tools as necessary to complete required work, • Establishing effective relationships with vendors and partners, • Maintaining regular and on-call work schedules to meet property’s needs, • Participating in training seminars The Property - Details Coming Soon! What We’re Looking for in a Maintenance Technician Candidate: • Must live within 30 minutes of the property if on-call is required, • Valid driver's license required, • Must be able to read and communicate effectively in English, both verbally and in writing, • Great people skills and a desire to provide residents an exceptional residential experience through superior in-person service and quality maintenance services, • High school diploma or GED equivalent, • 1 to 2 years of experience as a maintenance technician in a residential property, • Strong organizational skills and efficient work style, • Ability to work both independently and in a team environment, • Ability to maintain a “can do” attitude to ensure the property’s success, • Availability to work a flexible schedule including on-call rotation, weekends and holidays, • Successful completion of required background and drug screening prior to start of employment, • Ability to lift and carry up to or over 50 pounds., • 1 -10 pounds constantly, • 15-25 pounds will be 25% of the time, • 25-50 pounds will be 25% of the time, • Over 50 pounds will be 10% of the time, • Must be physically able to climb ladders, bend, or crawl into small spaces What We Offer: • Comprehensive Benefits including Medical, Dental, Vision, Life and Disability Insurance, • Health Savings & Flexible Spending Accounts including HSA, Health Care FSA and Dependent Care FSA, • 401(k) with Company Match after just 2 months of service, • Generous Paid Time Off starting with 17 PTO days, plus 2 Floating Holidays and 7 Company Paid Holidays, with additional PTO based on tenure, • Paid Parental and Maternity Leave, • Additional Financial Protection through Critical Illness, Accident and Hospital Indemnity coverage, • Employee Support & Lifestyle Benefits including EAP, Legal Plans, Pretax Commuter Benefits, Allstate Identity Protection and Pet Insurance, • Onsite Housing Discount subject to apartment availability, • Monthly Leasing & Renewal Commissions with additional earning potential (this will VARY based on positions) #IND1

Job Description General Summary Operates, maintains and repairs an operational engineering plant which provides a facility with such services as heat, air-conditioning, steam, and emergency power. Performs preventative and corrective maintenance on plant equipment. Operates one or more boilers, chillers, generators and associated equipment to produce steam, chilled water and electrical power for the facility. Essential Duties and Responsibilities • Observes and interprets reading on gauges and meters which register various aspects of boiler operations and the Central Energy Plant (CEP) Operations., • Adjusting controls to ensure safe and efficient operations of the plant that meets the demands for the utilities provided., • Logs the various aspects of the system’s operation, keeping the boilers, chillers, machinery and other system equipment in good working order., • Maintains the log, in which various aspects of plant operations are recorded., • Required to be skilled in the repair of rotating machinery, steam systems, compressed gases and water treatment systems, (i.e., clean, oil, repair or assist in repairs to plant equipment)., • Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services., • Treatment of cooling tower and boiler water with chemicals and analyze the water for such things as acidity, conductivity, hardness, biological growth and alkalinity., • Maintain the general cleanliness and appearance of the Plant., • Must be knowledgeable in troubleshooting, disassembling, tube cleaning and reassembling of industrial sized boilers and chillers., • Assists others as part of the maintenance team as required and performs other duties assigned according to personal qualifications., • Other duties as assigned. Knowledge, Experience and Skill Requirements • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificate in related field desired., • Previous experience in operating and maintaining industrial sized boilers, chillers and associated equipment., • Shall possess a current Stationary Engineer’s license from a city, state, or nationally recognized entity or obtain within 2 years of employment for high pressure steam plant operation. Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $49.94. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Job DescriptionBenefits: • 401(k), • Opportunity for advancement, • Training & development About the Role Education Management LMS is seeking a reliable and motivated Entry Level Maintenance Technician to support two preschool facilities. This position is ideal for someone eager to learn, dependable, and committed to maintaining a safe and welcoming environment for children and staff. Responsibilities Perform daily maintenance and minor repairs on facilities, equipment, and grounds Assist with classroom setups, furniture movement, and light carpentry, electrical, or plumbing tasks Conduct regular safety and maintenance inspections and report issues promptly Maintain tools, equipment, and supplies in good condition Support event setup and ensure all spaces meet cleanliness and safety standards Respond to maintenance requests from staff in a timely and professional manner Desired Experience One to two years of experience in facility maintenance, custodial work, or related trades preferred Basic knowledge of hand tools, safety practices, and building systems Experience working in a school, daycare, or similar environment is a plus Qualifications High school diploma or equivalent Dependable, punctual, and willing to learn new skills Must pass all required state and regulatory background checks and fingerprinting Ability to lift up to 50 pounds and perform manual labor Reliable transportation to travel between facilities Compensation Hourly pay range: 16.50 Benefits Paid time off and holidays Professional development and training opportunities Tuition discount for employee family members Schedule Monday to Friday, full-time or part-time available Occasional weekend or evening support for school events may be required Why Join Us This is a great opportunity to build maintenance skills in a positive, family-oriented school environment. You will play an important role in keeping our learning spaces safe and functional while gaining valuable experience for future advancement.

Job Description Job Overview The Facilities Maintenance Technician is responsible for helping maintain the Agency’s campus buildings, offsite locations, equipment, and grounds in safe, clean, and good working condition. This hands-on role performs routine maintenance, repairs, inspections, and preventative maintenance tasks across multiple sites. The Facilities Maintenance Technician responds to work orders, assists with emergencies, supports vendors and contractors when needed, and helps ensure all facilities operate efficiently and safely. This position requires flexibility, reliability, and the ability to work independently or as part of a team. Essential Duties Key duties of this position include, but are not limited to, the following: General Maintenance & Repairs • Perform routine maintenance and repairs to buildings, grounds, and equipment., • Complete work orders related to plumbing, carpentry, painting, electrical, lighting, HVAC support, locks, doors, flooring, and general repairs., • Troubleshoot maintenance issues and determine appropriate corrective action., • Assist with preventive maintenance programs for building systems and equipment. Safety & Inspections • Conduct routine inspections of buildings, grounds, tools, and equipment to identify safety hazards or maintenance concerns., • Promptly report unsafe conditions and assist in correcting hazards., • Support fire safety readiness by ensuring exits, signage, alarms, and related areas remain clear and functional., • Follow all safety procedures, OSHA standards, and agency policies. Grounds & Campus Support • Assist with upkeep of grounds, walkways, parking areas, fencing, and outdoor spaces., • Support seasonal operations including snow removal, salting, storm preparation, and weather-related cleanup., • Set up and break down rooms, furniture, and equipment for meetings, trainings, and events. Offsite Facilities Support • Travel to agency offsite facilities as needed to complete repairs, inspections, deliveries, or maintenance tasks., • Ensure offsite locations are maintained to the same safety and quality standards as the main campus. Teamwork & Operations • Use computerized work order systems to receive, update, and close service requests., • Maintain tools, equipment, and supplies in organized working condition., • Communicate effectively with staff, residents, vendors, and supervisors., • Assist contractors and vendors working onsite as directed., • Participate in emergency response efforts and after-hours support as needed. Essential Qualifications Key qualifications include: • High School Diploma or equivalent required., • Minimum of 3 years of experience in facilities maintenance, building operations, or a related trade preferred., • Working knowledge of general maintenance practices including plumbing, carpentry, painting, minor electrical, and building repairs., • Basic knowledge of HVAC systems and preventative maintenance preferred., • Ability to safely operate hand tools, power tools, ladders, and maintenance equipment., • Strong customer service and communication skills., • Ability to prioritize tasks and work independently., • Basic computer skills and familiarity with work order systems preferred., • Valid Driver’s License required. Physical/Travel Requirements Must be able to walk, stand, bend, kneel, climb stairs and ladders, reach, lift and carry up to 50 pounds, and work indoors and outdoors in varying weather conditions. Must be able to travel between campus and offsite locations as needed. The employee must be able to meet these requirements with or without reasonable accommodation. Disclaimer Nothing in this job description restricts Andrus’s right to modify the duties/responsibilities of this job at any time, with or without advanced notice. EEO Statement Andrus is an equal opportunity employer. Tuesday to Friday 7am to 5pm Saturday 8am to 12pm 80/hrs

Job Description Mechanic (Truck Fleet Operations) Almstead Tree and Shrub Care is a second-generation, family-owned arboriculture firm that has been offering environmentally conscious services in the NY, NJ, and CT tri-state area since 1964. We are a TCIA accredited company that values our employees’ professional aspirations, career development, safety and quality of life. We are looking for a skilled PM Mechanic to join our maintenance team. The primary responsibility of this role is to conduct routine, scheduled preventative maintenance on machines, vehicles, or facility equipment to maximize lifespan and minimize unplanned downtime. The ideal candidate has a strong mechanical aptitude, attention to detail, a commitment to safety, and a team player. Responsibilities include: ·Preventative Maintenance: Perform scheduled services such as oil changes, fluid checks/replacements, filter changes, lubrication, belt adjustments and check for DOT issues. Inspections: Conduct thorough inspections of equipment, diesel trucks, and equipment trailers to identify potential issues before they cause breakdowns. Minor Repairs: Perform minor mechanical repairs and road calls as needed. Diagnostics: Troubleshoot and diagnose mechanical, hydraulic, or electrical systems. Documentation: Maintain accurate, detailed logs of all maintenance work, inspections, and parts used, via Repair Orders and PM documentation. Safety & Cleanliness: Follow industry safety procedures, maintain a clean and organized work area, and safely operate tools and machinery. Requirements ·Experience: 1–3+ years of experience in maintenance, preferably as a PM mechanic or technician; Experience with tree industry equipment is a plus Technical Skills: Knowledge of diesel engines, medium equipment, hydraulic systems and equipment trailers. Tools: Your own tools are required. Education: High school diploma or GED required; technical/vocational school training is a plus. Driver’s License: Valid driver's license required; a CDL is a plus. Physical Requirements: Ability to lift up to 50–65 lbs, stand, bend, and work in various weather conditions. Benefits We provide a competitive hourly rate of $22 to $26, plus a comprehensive benefits package that includes medical and dental coverage with employer contributions, a 401K retirement savings plan, paid time off, and more. Almstead Tree & Shrub Care Company, LLC provides equal employment opportunities to all employees and applicants for employment.