Maintenance electrical jobs in Syracuse, New YorkCreate job alerts

Trinity Health FirstChoice is seeking a travel Interventional Radiology Technologist for a travel job in Syracuse, New York. Job Description & Requirements • Specialty: Interventional Radiology Technologist, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Employment Type:Part timeShift: Description: POSITION SUMMARY: Performs imaging procedures. Provides patient services using imaging modalities. EDUCATION, TRAINING, EXPERIENCE, CERTIFICATION AND LICENSURE: Satisfactory completion of formal imaging training in an AMA approved school and meets requirements for American Registry of Radiologic Technologist or American Registry of Diagnostic Medical Sonographers or Nuclear Medicine Technology Certification Board and/or New York State Department of Health License. Maintains knowledge of all stages of human development as specified. Participates in orientation and continuing education and updates and maintains knowledge and skills related to specific areas of expertise. SPECIAL EQUIPMENT, SKILLS OR OTHER REQUIREMENTS: Demonstrated mechanical and/or electrical dexterity and ability. WORK ENVIRONMENT AND HAZARDS: Clinical setting. Exposure Class I. PHYSICAL DEMANDS: Medium work: standing, walking, sitting, lifting, carrying, pushing and pulling. WORK CONTACT GROUP: All services, employees, medical staff, patients, visitors, vendors, various regulatory and professional agencies. SUPERVISED BY: Clinical Coordinator General Performance Criteria: Interventional Radiology Technologist • Operates equipment/machinery within service., • Maintains equipment/machinery within service., • Performs preventative maintenance procedures., • Adheres to safety standards within service and network., • Utilizes Material Safety Data Sheets within service., • Performs required sterilization techniques., • Maintains confidentiality related to patients, staff and visitors., • Effectively educates the patient/family in specialty area., • Adheres to hospital confidentiality statement. Ministry Information: * FirstChoice offers rewarding Nursing, Respiratory Therapist, Surgical Technologist, and Health Care Professional travel positions with a flexible schedule to fit your life. * FirstChoice travel Health Care Professionals fill critical positions when unforeseen or unplanned circumstances occur; or, when there is a position open due to an extended leave-of-absence. * You’ll get to experience a variety of practice settings while traveling within your local region or traveling nationally – your choice! * Opportunity to participate in 403B program: FirstChoice Benefits Base Pay Rate: $50.00 ( not including applicable differentials and travel stipend) . Pay is based on experience, skills, and education. Exempt positions under the Fair Labor Standards Act (FLSA) will be paid within the base salary equivalent of the stated hourly rates. The pay range may also vary within the stated range based on location. For more information, Text "Choice" to 60184 Job Details: Location: St. Joseph's Hospital Health Center Start Date: Flexible Weeks: 13 Hours: 40 Shift: Days (7a-5:30p) Gross Weekly Rate: $3560.00 Our Commitment Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law. Trinity Health FirstChoice Job ID #00607846. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Travel IR Tech, IR Technician About Trinity Health FirstChoicePremium pay FirstChoice offers a rewarding career with significant premium pay and flexible scheduling to fit your life. FirstChoice healthcare travel professionals fill critical positions when unforeseen or unplanned circumstances occur; or, when there is a position open due to an extended leave-of-absence. You’ll get to experience a variety of practice settings while traveling within your local region or traveling nationally – your choice! Healthcare travel professionals, join us in caring for our community, we can't do it without you. FirstChoice exclusively supports facilities within the Trinity Health system meaning you will have a consistent experience between job sites. Your training at one site will apply to other sites within the region and will minimize the time you are spending outside of patient care. We understand that there has been a fundamental shift in the nursing position in recent years and like any other employee, nurses want more options and flexibility in their careers. FirstChoice provides you with both along with the comfort and security of one employer. Benefits of Being a FirstChoice healthcare travel professional: • Premium pay, • Choose your own travel adventure—work in a variety of practice settings, • Wide range of assignments available, • Housing and meal stipend Minimum Qualifications/Requirements of a FirstChoice Nurse: • Registered nurse with a license in the state(s) you will work, • Minimum of 2 years, depending on specialty area, • Cannot hold a concurrent position at a Trinity Health facility Trinity Health is a leading not-for-profit Catholic health system with 92 hospitals and hundreds of primary, specialty and continuing care centers across the United States. Benefits • Employee assistance programs, • 403b retirement plan, • Discount program

Position Title: HVAC Service Tech Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Category: Technician Location Name: Falso Location Address: 6019 Corporate Dr, East Syracuse, NY 13057 Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU • Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position), • Our Top Technicians earn over $100,000, • Generous PTO provided, • 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays), • 29 paid days off after your 2nd year of employment, • Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S., • Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs, • Company-provided smart phone, tablet, uniform plan, and tool replacement program, • We’ll make you better at what you do with our internal Training Academy, • Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions, • Company-paid employee Life Insurance with options for YOU and your Family!, • Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls, • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner, • Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner, • Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks, • Completes routine maintenance and equipment cleaning as needed or required, • Responsible for delivery and removal of parts and equipment needed to complete service work, • Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer., • Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability, • Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction, • Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit., • Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for, • Represents the company professionally, honestly, and ethically in all business matters and activities, • Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed, • Performs similar/other duties as needed or assigned, • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately, • Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately, • Corrects substandard acts or conditions within area of control, • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s), • Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn, • Complies with the general rules as prescribed by company program(s) procedure(s), • Operates devises or equipment as prescribed by company program(s) or procedure(s), • Participates in any safety initiatives, teams, or committees, • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately, • Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents, • Does not perform act that may endanger the safety or well-being of others, • Does not engage in any pranks, contests, or rough boisterous behavior, • High school diploma or GED with additional training and 1+ years’ experience in HVAC with technical training certification required, • Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area, • EPA and safety certifications required, • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories, • Proficient mechanical aptitude and the ability to operate all necessary tools and equipment, • Proficient and able to operate all necessary tools and equipment to perform various service projects, • Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment, • Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision, • Proficient and able to install a basic duct fitting, • Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision, • Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns, • Effective and efficient time-management and organizational skills, • Valid driver’s license with acceptable driving record, • Available to work flexible hours and on-call shifts as needed, • Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl., • Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas, • Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt, • Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception

Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America’s #1 ‘one-stop’ destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: • Take home vehicle, • All tools provided, • Work-life balance, • On-call stipends, • Reasonable OT expectations, • Training & 3 year pay raises for entry level / inexperienced technicians, • Competitive wages, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days, • Employee recognition and awards, • And much more! Position Summary: The General Maintenance Technician is responsible for performing a variety of maintenance tasks to ensure the safety, functionality, and appearance of facilities and equipment. Key responsibilities include troubleshooting, repairs, and preventive maintenance in areas such as plumbing, electrical, HVAC, carpentry, and general building systems. Responsibilities: 1. Troubleshoot and independently repair building systems, including plumbing, electrical, HVAC, and general mechanical components., 2. Perform preventive maintenance tasks on complex systems and equipment to ensure optimal performance and longevity., 3. Assist in training and mentoring entry-level technicians by providing guidance on maintenance tasks and best practices., 4. Lead smaller maintenance projects, ensuring timely completion and adherence to quality standards., 5. Collaborate with vendors or contractors to coordinate repairs or installations, verifying work complies with company and industry standards., 6. Maintain an organized inventory of tools, replacement parts, and vehicle supplies, ensuring adequate stock for ongoing maintenance needs., 7. Assist with equipment upgrades or replacements and coordinate ordering of necessary parts or tools., 8. Conduct routine maintenance and inspections on the service vehicle, ensuring compliance with scheduled upkeep and company standards., 9. Adhere to workplace safety protocols, company policies, and industry regulations (e.g., OSHA, safety codes, building codes) while completing tasks., 10. Identify and promptly report safety hazards or compliance issues to the maintenance supervisor. 11. Perform other duties as assigned by the management team to support departmental objectives. Working Relationships: Work directly with Department teammates. Frequent communication with other departments or teams, and External Vendors. Minimum Education: High School or GED Preferred Education: Trade and Technical schools’ certificate/diploma Minimum Experience: 3-5 years of related experience Preferred Experience: 5-7 years of related experience. Proficient knowledge of building systems, including HVAC, electrical, plumbing, mechanical, and safety systems Licenses/Certifications: Applicable Trade Licensure; Plumbing, Electrical, Carpentry Soft Skills: • Communication Skills – Clearly convey information, listen actively, and ensure mutual understanding, • Teamwork & Collaboration – Working effectively with others to achieve common goals, • Problem-solving – Use critical thinking to analyze situations and implement effective solutions, • Adaptability – Stay flexible and open to change in a dynamic work environment, • Time Management – Prioritize tasks, meeting deadlines, and managing time efficiently Other Requirements: Travel: Travel is a must; you must be able to drive for extended periods as needed · A company vehicle is provided; they must maintain a clean driving record Hours & Conditions: Monday–Friday, 40 hours minimum, with participation in an on-call rotation, including holiday coverage Physical Requirements:· • Must be able to work safely in confined spaces as required by the role, • Ability to regularly lift up to 10 pounds, frequently lift up to 25 pounds, and occasionally lift up to 80 pounds, using proper lifting techniques and equipment as needed, • Must be able to stand or walk for up to 8 hours per day, • Ability to perform physical tasks such as reaching overhead, bending, squatting, twisting, grasping, gripping, and performing repetitive movements, • Comfortable working in environments with varying temperatures, including cold and hot conditions, as required by the role, • The work environment usually has moderate noise levels typical of industrial or operational settings At EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America’s #1 ‘one-stop’ destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: • Take home vehicle, • All tools provided, • Work-life balance, • On-call stipends, • Reasonable OT expectations, • Training & 3 year pay raises for entry level / inexperienced technicians, • Competitive wages, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days, • Employee recognition and awards The Field Technician will travel to store locations to perform maintenance and service repairs on various types of commercial food service equipment. Candidate will work with dispatchers and team supervisors to manage workload to complete calls in timely manner. Responsibilities: • Repair and/or refurbish on equipment such as: frozen beverage, fountain soda coffee brewers, gas dispensing equipment, refrigerated cases, and other food service equipment., • Perform preventative maintenance on equipment such as frozen beverage units, fountain soda, coffee brewers, high speed ovens and other food service related equipment., • Responsible for managing parts inventory on their assigned service truck by conducting weekly cycle counts and periodic physical inventory., • Must be able to travel to several locations throughout the day and work independently the majority of the time., • Receive dispatches via email & phone, and works with dispatchers to ensure prioritization of work with the goal of maximizing equipment up-time., • Updates job status and notes via online work order management system, provides detailed resolution notes, • Maintains truck inventory accuracy by performing weekly cycle counts and annual inventory., • Ensures service vehicle is maintained, clean, and well stocked with service parts., • Perform other job related duties as assigned by Department Manager Working Relationships: Internal Facilities Managers, dispatchers and parts department, to include Retail Store team members. Will also interact with other technical peers including: HVAC Technicians, Fuel Maintenance Technicians and General Maintenance Technicians. Minimum Education: a high school diploma or its equivalent Preferred Education: Trade school and/or Associates Degree Minimum Experience: Requires 0-2 year’s related experience. Preferred Experience: 2+ years of experience repairing food service equipment such as high speed ovens, food warmers, coffee brewers, frozen beverage equipment (Brand: Taylor or FBD), fountain soda units, roller grills and other related equipment. Additional experience in other trades (HVAC, plumbing, electrical) would be a plus. Other: Physical • Must be able to lift 80 pounds • Grasping/Griping/fine manipulation • Pushing/pulling/bending/kneeling/twisting/climbing on a regular basis • Carrying/sitting/walking/standing and lifting above shoulder level on a regular basis. Travel: As a Field Tech, this position will travel to multiple store locations during the entire shift. Hours & Conditions: Hours and shift times can vary. Must be flexible and have the ability to work overtime when needed At EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

Are you curious about solving complex business challenges for a leading convenience retailer? Do you have a passion for cross functional collaboration? Then you may be the perfect addition to our team! Fastrac is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America’s #1 ‘one-stop’ destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: • Competitive wages, • Work today, get paid tomorrow through our earned wage access program*, • Paid Time Off, • Medical/Health/Dental Coverage, • 401K with Company Match, • Team Member Discounts, • Tuition Reimbursement, • Employee Assistance Program, • Health Savings Account, • Company Spirit Days, • Employee recognition and awards We are looking for a technically skilled candidate with good problem-solving ability for the position of FTS Support Technician. The duties of an FTS Support Technician include being a reference point for all IT related queries at store level, responding to store’s needs in a timely manner and ensuring the optimal running of all systems, among other technical duties. Additionally, the FTS Support technician will participate in IT projects to upgrade physical technology and secure the environment. Monitor and manage network equipment to maintain both WIFI and network access within the store environment. Responsibilities: 1. Providing support to stores in multiple states and responding in a timely manner, 2. Accessing ticketing system and provide status updates to resolve tickets within service level agreements, 3. Utilize existing technical, computer and electrical knowledge to successfully troubleshoot hardware problems to include, but not limited to installation, upgrading, maintenance, cleaning, and replacement of point of sale, desktop computers, fuel controllers, electronic payment controllers, Digital Media Boards, and telephone equipment., 4. Install and maintain inhouse wiring of both power and network cabling to keep clean and manageable wiring system withing the store, 5. Maintain routers, modems, and access points to ensure proper network settings and availability., 6. Use remote access software to assist Helpdesk personnel to troubleshoot the root cause of the issues and provide a timely resolution., 7. Maintain inventory in vans and at office location to provide accountability and access to all equipment. This includes keeping serviceable assets as well as performing RMAs to vendors., 8. Manage administrative duties such as reporting company mileage, credit card expenses, processing RMAs for equipment on company truck Working Relationships: The FTS Support Technician will be embedded in a team of FTS Techs supporting a territory of convenience stores. The team works together to communicate common goals and to cover off hours, holidays, and weekends. Additionally, the FTS Support Technician will interact with external vendors to provide onsite support outside of covered territories. Team Members must maintain a professional and trustworthy relationship with store personnel to foster an open and accurate accountability as it pertains to store operations and procedures Minimum Education: High School: GED and some technology certification or coursework completed. Preferred Education: Associate’s degree or Technology Program Certificate Minimum Experience: 2+ years’ experience in role relating to computer networks and systems maintenance. Minimum Experience: Preferred Experience: Experience with NCR Radiant, NCR StorePoint Retalix, Verifone, Gilbarco, Wayne, and PDI systems a plus. Licenses/Certifications: Comptia A+, Network Soft Skills: • The ideal candidate has excellent written and verbal communications skills., • Must be able to interact with the IT and store communities to solve physical hardware issues inside a convenience store environment while making independent decisions for resolution., • Must participate in the coordination or technology materials to complete project objectives. Other Requirements: Travel: Ability to travel independently 50-75%. Must have clean driving record. Hours & Conditions: First Shift (Hourly-Non-Exempt) After hours and late nights are required on occasion or rotational basis. Physical Requirements: Ability to maneuver and regularly lift and or move up to 50-75 pounds. Must be able to climb ladders. At EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced corporate environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make, and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: • Medical, Dental, Vision, and Prescription, • Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Completing preventative, predictive, and reactive industrial maintenance throughout the facility, • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary, • Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings, • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc., • Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals, • Operating a forklift, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Ability to repair equipment in close proximity to explosives, • Must be eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Basic computer skills, • Ability to understand and communicate in English (verbal/written), • Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE), • Basic math skills, including addition, subtraction, multiplication, and division, • Ability to work overtime, including weekends, holidays, or different shifts with advance notice, • Minimum of one year of experience with maintenance trades in an industrial environment, • Ability and willingness to work underground in a mining environment, • Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: • Experience with SAP or a Computerized Maintenance Management System (CMMS), • Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification, • Predictive Maintenance and/or Precision Maintenance Certifications, • High school diploma/GED or a minimum of two years equivalent work experience, • Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make, and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: • Medical, Dental, Vision, and Prescription, • Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Completing preventative, predictive, and reactive industrial maintenance throughout the facility, • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary, • Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings, • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc., • Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals, • Operating a forklift, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Ability to repair equipment in close proximity to explosives, • Must be eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Basic computer skills, • Ability to understand and communicate in English (verbal/written), • Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE), • Basic math skills, including addition, subtraction, multiplication, and division, • Ability to work overtime, including weekends, holidays, or different shifts with advance notice, • Minimum of one year of experience with maintenance trades in an industrial environment, • Ability and willingness to work underground in a mining environment, • Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: • Experience with SAP or a Computerized Maintenance Management System (CMMS), • Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification, • Predictive Maintenance and/or Precision Maintenance Certifications, • High school diploma/GED or a minimum of two years equivalent work experience, • Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make, and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: • Medical, Dental, Vision, and Prescription, • Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Completing preventative, predictive, and reactive industrial maintenance throughout the facility, • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary, • Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings, • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc., • Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals, • Operating a forklift, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Ability to repair equipment in close proximity to explosives, • Must be eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Basic computer skills, • Ability to understand and communicate in English (verbal/written), • Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE), • Basic math skills, including addition, subtraction, multiplication, and division, • Ability to work overtime, including weekends, holidays, or different shifts with advance notice, • Minimum of one year of experience with maintenance trades in an industrial environment, • Ability and willingness to work underground in a mining environment, • Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: • Experience with SAP or a Computerized Maintenance Management System (CMMS), • Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification, • Predictive Maintenance and/or Precision Maintenance Certifications, • High school diploma/GED or a minimum of two years equivalent work experience, • Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make, and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: • Medical, Dental, Vision, and Prescription, • Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Completing preventative, predictive, and reactive industrial maintenance throughout the facility, • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary, • Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings, • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc., • Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals, • Operating a forklift, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Ability to repair equipment in close proximity to explosives, • Must be eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Basic computer skills, • Ability to understand and communicate in English (verbal/written), • Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE), • Basic math skills, including addition, subtraction, multiplication, and division, • Ability to work overtime, including weekends, holidays, or different shifts with advance notice, • Minimum of one year of experience with maintenance trades in an industrial environment, • Ability and willingness to work underground in a mining environment, • Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: • Experience with SAP or a Computerized Maintenance Management System (CMMS), • Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification, • Predictive Maintenance and/or Precision Maintenance Certifications, • High school diploma/GED or a minimum of two years equivalent work experience, • Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make, and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our specialized portfolio enterprise where we serve diverse businesses who support unique customers or markets, including animal nutrition and health, bioindustrial, road safety salt, and Cargill joint ventures. Job Type: Full Time Shift(s) Available: 1st/3rd Compensation: $24.39 - $26.71/hr Sign-On Bonus: $1500 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: • Medical, Dental, Vision, and Prescription, • Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Completing preventative, predictive, and reactive industrial maintenance throughout the facility, • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary, • Installing, maintaining, testing, evaluating, and repairing various components, and systems including packaging equipment, hydraulic & pneumatic systems, screw, belt and roller conveyors, pumps, gear reducers, and bearings, • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, etc., • Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals, • Operating a forklift, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Ability to repair equipment in close proximity to explosives, • Must be eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Basic computer skills, • Ability to understand and communicate in English (verbal/written), • Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions, which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE), • Basic math skills, including addition, subtraction, multiplication, and division, • Ability to work overtime, including weekends, holidays, or different shifts with advance notice, • Minimum of one year of experience with maintenance trades in an industrial environment, • Ability and willingness to work underground in a mining environment, • Current ATF certification or the ability to obtain one upon hire What Will Put You Ahead: • Experience with SAP or a Computerized Maintenance Management System (CMMS), • Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification, • Predictive Maintenance and/or Precision Maintenance Certifications, • High school diploma/GED or a minimum of two years equivalent work experience, • Experience in troubleshooting and maintaining various components and systems, such as but not limited to packaging equipment, hydraulic & pneumatic systems, belt or roller conveyors, pumps, gear reducers, or bearings Routine background check and Alcohol, Tobacco, and Firearms (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

JOB TITLE: Control Systems Engineer (Oracle, Hitachi/ABB, Client, or OSI) JOB LOCATION: Liverpool NY (Hybrid) WAGE RANGE*: $50-65/hr. JOB NUMBER: NGGJP00016843 4 days a week for training, then hybrid (2-3 days remote) REQUIRED EXPERIENCE: • Educated to degree level in Electric Engineering technology, Information Technology, or other technical discipline is required • Working knowledge of Windows and Linux Operating Systems • Basic understanding of electrical circuits and diagrams. • Working knowledge of commercial relational database packages (Oracle, SQL, Postgres) is highly desired • Experience working with commercial control systems such as Hitachi/ABB, Client, or OSI is highly desired • Experience with control room operations or field operations business is desired • Must possess ability to work independently and manage workload in a fast-paced environment • Must be able to work effectively with remote teams and management JOB DESCRIPTION: Client's Critical National Infrastructure (CNI) department provides IT support services for the applications and environments that drive the company's critical operations. The data maintenance position will be part of the team supporting the New York jurisdiction's Energy Management System (EMS) and Supervisory Control and Data Acquisition (SCADA) application. The EMS/SCADA application is critical for the monitoring and control of the transmission and distribution electrical networks. The successful candidate will join a team responsible for supporting the overall 24x7 operation of Client's EMS/SCADA. The successful candidate will work as part of multi-disciplinary team supporting the commissioning and modelling of electric distribution equipment in support of Client's FLISR (Fault Location, Isolation, & Service Restoration) and Distributed Generation connection programs within our NY jurisdiction Section 4 – Position Responsibilities Key Responsibilities: • Performs tasks as part of a team responsible for maintaining control system database which models electric system topology • Coordinate with field personnel to update the SCADA database, update operating displays, and commission field equipment that communicates with the EMS. • Provide day-to-day EMS support by effectively responding to the needs of control room operating staff, field personnel, and other end users. • Participate in support and troubleshooting of problems with data and display discrepancies which impact control center and field operations • Works closely with multiple teams to prioritize and complete deadline driven work impacting company objectives • Coordinates weekly updates with control rooms and other stakeholders Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions.

⚡Join Our Growing Team as an Industrial Electrician at Superior Metals Manufacturing!⚡ Job Summary: Are you looking for your next challenge? Join us as an Industrial Electrician and become an intricate part of our success. In this dynamic role, you’ll tackle exciting challenges by inspecting, maintaining, and troubleshooting high-voltage systems and production equipment. With your electrical expertise and hands-on skills, you'll ensure everything runs smoothly and safely. You'll work with cutting-edge technology and engage in innovative electronic system development—all while being part of a fast-growing company. If you love solving problems and thrive in a fast-paced environment, this is the perfect opportunity for you! Essential Job Functions: • Inspect, maintain, and repair our plant-wide production equipment to keep everything running smoothly., • Work hands-on with 480V 3-phase electrical power distribution systems—let’s keep the lights on!, • Apply your electrical theory knowledge and troubleshooting to tackle any issues that arise., • Dive into machine instrumentation and electrical controls, keeping our systems sharp and efficient., • Handle high voltage systems and equipment like a pro., • Get acquainted with hydraulic and pneumatic systems—your toolbox just got a little bigger!, • Utilize PLC controls and Ladder Logic Programming to enhance our automation processes., • Read and interpret electrical and hydraulic schematics and plant drawings like a map to success., • Assemble, install, test, and maintain electrical and electronic fixtures using your trusty hand and power tools., • Perform preventative maintenance tasks to keep our production equipment in top shape., • Diagnose malfunctioning systems with your keen troubleshooting skills and test equipment., • Ensure safety and continuity in our electrical systems using ohmmeters and voltmeters., • Inspect electrical systems for hazards and compliance—safety first!, • Engage in the exciting world of electronic system development, including the design and repair of controllers, timers, drives, and switches., • Education: High school diploma or GED., • Experience: 5+ years in industrial maintenance/electrical experience., • Certifications: Electrical training or certification preferred; NFPA Certified Electrical Safety Technician (NFPA 70E) is a plus., • Skills: HVAC knowledge, robotic experience, and familiarity with computer networks are preferred., • Language Skills: Ability to read and interpret safety rules, operating instructions, and maintenance manuals, as well as communicate effectively with colleagues and vendors., • Mathematical Skills: Proficient in basic math operations—adding, subtracting, and working with fractions and decimals., • Reasoning Ability: Capable of solving practical problems and interpreting various types of instructions., • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25 - $45 per hour, with potential to make more based on your experience, education and shift. We also have available overtime., • New Facility: Work in our brand-new, cutting-edge manufacturing environment. SMM is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. SMM as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at SMM. #IndustrialElectrician #ElectricianJobs #Innovation #VETS #Manufacturing #Millwright This is a non-management position This is a full time position

Job Description As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, Italian cheese, and ice cream mix marketed under the Upstate Farms®, Bison®, Milk for Life®, and Intense Milk® brands. Responsible for performing breakdown and preventative maintenance on production and supporting equipment. Current Openings • Full Time - 2nd & 3rd Shift, • Part Time & Flex Scheduling also available Essential Duties & Tasks • Carry out tasks issued by maintenance shift supervisor., • Troubleshoot support system problems using basic problem solving skills., • Perform preventative maintenance tasks on equipment assigned to you., • Complete all standard work orders and preventative maintenance tasks assigned. Submit all completed paperwork., • Record information in required logbooks for systems history and continuous improvement., • Record any parts/components used for repairs to ensure replenishment of On-Hand balances are maintained, and properly dispose of used parts/components., • Ensure quality standards set by the company are adhered to after PM’s and/or repairs are made to equipment., • Perform machine repairs based upon a maintenance call or an assignment in a timely fashion., • Maintain cleanliness of the areas you are working in; properly dispose the parts/components you have replaced., • Promote a safe and harmonious work environment with adherence to company policy, procedures, safety and health regulations., • Maintain compliance with S.Q.F. Certification., • Perform other duties as assigned. Minimum Requirements • Minimum of a GED or High School Diploma. Must be a minimum of 18 years of age. • Technical training or electrical/mechanical technician degree, or verifiable comparable experience., • Food manufacturing background is a plus., • Must be able to operate forklifts and pallet jacks (electric/manual)., • Experience with programmable logic controller, instruments and controls is preferred., • Minimum of 2-3 years of experience within the mechanical field; working with boilers, ammonia refrigeration, air compressors, air handling units and HVAC is a plus. Area Specific • Must be able to work within varied temperature ranges; Must be able to work with numerous forms of energy such as electricity, steam, pneumatic, mechanical; Must be able to read, interpret and comprehend schematics and blueprints; Must be able top use Human Interface Machines and computers (stop and start-up); Must be able to lift up to and including 50lbs. Knowledge, Skills, and Abilities Mechanical: • Knowledge of how your assigned equipment operates., • Basic knowledge & troubleshooting skills in mechanics. Experience with; plumbing, pumps, seals & gaskets, drive systems (gear, belt, and chain), bearings & bushings, fastener thread designations & properties of lubricants., • Basic knowledge & troubleshooting skills in pneumatics. Experience with; basic understanding of how pneumatics work, knowledge of the function and type of control components., • Basic knowledge & troubleshooting skills in hydraulics. Experience with; basic understanding of how hydraulics work, knowledge of the function and type of control components, read and understand basic hydraulic prints., • Basic knowledge & troubleshooting skills in electrical. Experience with; understanding basic single phase wiring, correct use of a multimeter, AC & DC power, fuses and breakers, read and understand basic electrical prints, basic knowledge of three phase wiring, identify and change three phase motor rotation, proper motor and name plate reading, actuators & sensors, PLC. Other: • Knowledge of general computer functions such as Microsoft Office programs, spreadsheets, etc., • Knowledge of basic safety regulations., • Skill in multi-tasking., • Skill in basic problem solving., • Skill with basic math procedures., • Skill in team-building., • Skill in interpersonal and communication., • Possess good mechanical aptitude to disassemble and assemble all types of equipment., • Ability to communicate with co-workers, management team members, and other individuals in a courteous and professional manner., • Ability to climb ladders, stairs or use a scissor lift to inspect and/or repair equipment., • Ability to work in a fast paced environment., • Ability to pay close attention to detail and coordinate various activities simultaneously., • Ability to complete assigned tasks. Physical Dimensions Job-related physical abilities an individual needs to possess in order to perform the job in a satisfactory manner. • Seeing: Must be able to read reports and use computer., • Hearing: Must be able to hear well enough to communicate with coworkers., • Standing/Walking/Mobility: Must be able to stand to open files and operate office equipment or mechanical equipment; mobility between departments or physical locations, and attend meetings of coworkers and management., • Climbing/Stooping/Kneeling: Must be able to climb, stoop, or kneel to perform routine tasks within the scope of job., • Lifting up to 50 lbs./ Pulling/Pushing., • Touching/Grasping/Feeling: Must be able to write, type, and use office equipment or other equipment; along with handling material and equipment. Expectations • Ability to perform functions in a fast paced environment., • Promote and lead by example a safety culture that drives safety as number one., • Able to work in a varied temperature environment., • Adheres to Company Policy and Procedures., • Maintain a flexible work schedule to provide program continuity and visibility., • Acts as a role model outside and within the Company., • Performs duties as workload necessitates., • Maintains a positive and respectful attitude., • Meets departmental productivity standards., • Provides guidance for coworkers as needed or as requested., • Communicates regularly with supervisor about job-related issues., • Demonstrates flexible and efficient time management and ability to prioritize workload., • Consistently reports to work on time prepared to perform duties of position. Pay: $26-30 per hour* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Foundry Equipment Maintenance Technician – 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 (non-negotiable) Job Type: Full-Time About the Opportunity: Join a leading manufacturing team at Eaton’s ES GEIS CHD division, where you’ll play a critical role in keeping automated foundry equipment running smoothly. This 2nd shift role is ideal for a skilled maintenance professional with strong electrical and mechanical capabilities looking for stability, great benefits, and relocation support within the U.S. What You’ll Do: • Diagnose and repair electrical, hydraulic, pneumatic, and mechanical malfunctions on automated foundry equipment., • Perform sequence checks and machine diagnostics to resolve issues and ensure performance meets manufacturer standards., • Read and interpret shop orders, schematics, blueprints, and manuals., • Perform pipefitting and fluid system modifications for water, air, gas, oil, etc., • Operate forklifts as needed to support maintenance duties., • Generate and complete shop orders related to repairs and maintenance tasks., • Maintain a clean, safe, and organized work area., • Follow all safety procedures and compliance standards. What You Bring: • High school diploma or equivalent (required), • Minimum 3 years of industrial mechanical maintenance experience, • Strong knowledge of D.C. and A.C. electrical systems, • Understanding of pneumatic and hydraulic systems, plumbing, piping, and close-tolerance machine repair, • Ability to use measuring instruments and evaluate machine operation sequences, • Must be legally authorized to work in the U.S. without current or future sponsorship Preferred: • 5+ years of industrial maintenance or journeyman-level experience, • Forklift operation experience What’s Offered: • $72,508 annual base salary, • Full benefits package, • Relocation assistance (for the ideal candidate), • Interview travel reimbursement, • Monday–Friday schedule (2:30 PM – 11:00 PM) Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job Description Taylor Northeast is the mid-Atlantic and New England’s premier dealer of forklifts, container handlers, railcar movers, industrial floor cleaning machines, and much more. Headquartered near Reading, Pennsylvania with multiple branch facilities from Baltimore to New Hampshire, we sell, rent, service, and rebuild a range of custom and heavy-duty material handling equipment that is unlike any other company in the industry. And we are fortunate to have an equipment lineup that is backed by the best service technicians and parts support teams in the Northeast. We are seeking a Field Technician for the Syracuse, NY area to service various types of material handling equipment. The ability to work, think and operate independently is a must. RESPONSIBILITIES • Inspect, diagnose and service heavy lift equipment (diesel, electric or LP fueled) to diagnose technical problems, • Determine required repairs, • Maintain equipment service records, • Conduct regular preventative maintenance tasks on-site at customers' locations, • Test mechanical equipment after repair or assembly to guarantee proper performance and compliance with the manufacturers' specifications, • Hydraulic experience necessary, • Diesel experience necessary, • Strong electrical aptitude necessary, • Must have clean, safe driving record, • Prior mechanical and technical experience on large mobile equipment preferred, • Applicant must be able to pass a pre-employment drug test, physical exam, and background checkBENEFITS, • Competitive salary commensurate with experience, • 401(k) with company match, • Health insurance (majority paid by company), • Dental insurance, • Vision insurance, • Life insurance, • Flexible schedule, • Referral program, • Weekly pay schedule Taylor Northeast is proud to be a flagship member of the H&K Equipment Group, a fast-growing network of five operating companies that employs hundreds of experts at businesses located throughout the US. Our companies’ primary specialties include full-service, cradle-to-grave coverage of heavy-duty and customized material handling equipment. From the nation’s busiest ports to its largest mills, to its biggest infrastructure projects, you will find our equipment wherever you find materials on the move. Learn more about the power of our teams at taylornortheast.com. We are an equal opportunity employer Powered by JazzHR FInOzsWSNf

Job Description Job Title: Facilities Maintenance Technician Company Introduction: G&C Food Distributors is a leading re-distributor of refrigerated, frozen, and dry food. We store and deliver more than 4,000 food items to meet the needs of our customers across 28 states and 35 countries internationally. In recent years, G&C Foods has grown to be one of the most respected redistributors in the United States, and we are rapidly expanding all areas of our organization. Location: Syracuse, NY Schedule: Sunday through Thursday Job Summary: The Facilities Technician is a highly skilled individual who provides technical facility support and upkeep. This is achieved through the direction and oversight of certified vendors and service groups responsible for maintenance and upkeep of the critical processes at the G&C Facility, as well as routine hands-on maintenance and troubleshooting. This person will also be responsible for detailed scheduling, reporting, and tracking of preventative and routine maintenance of facility equipment. This position is largely self-regulated daily. This individual must be able to work independently and be capable of critical decision-making. Duties and Responsibilities: • Regular coordination with the Facility Manager for daily tasks., • Respond to all service requests as quickly and efficiently as possible by utilizing shift end reports to plan accordingly. Complete all necessary documentation associated with the service request., • Complete daily and monthly rounds/temperature checks., • Check and maintain mechanical, electrical, pump hose, riser rooms, exhaust fans, and any other functional or safety concerns., • Ammonia system monitoring, preventative maintenance scheduling, and troubleshooting., • Take after-hours "on call" duties as assigned., • Monthly inspections and immediate attention to areas posing risks to the life safety of employees and visitors., • Excellent diagnostic skills, • Strong understanding of mechanical disciplines, • Experience in dealing with outside vendors and service representatives, • Strong attention to detail and sense of urgency in completing job tasks, • Ability to follow instructions efficiently, • Ability to maintain a friendly, professional attitude with prospects and colleagues, • High School Diploma or equivalent required, • Valid NYS Driver's License At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job; you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – Medical plans starting at just $24.73/week, plus comprehensive vision, dental, and a 401(k) with company match to secure your future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you! #ADP1

Job DescriptionSalary: $28-35/hr DOE About Us: Firematic is a leader in providing fire and emergency services solutions. We maintain and service specialized Aircraft Rescue and Firefighting (ARFF) vehicles and equipment for airports, municipalities, and private facilities. We are looking for a skilled ARFF Mechanic to join our team and keep our customer's fleet in top operational condition. Position Overview: The ARFF Mechanic is responsible for the inspection, diagnosis, maintenance, and repair of ARFF trucks and related firefighting equipment. This role is essential to ensuring equipment is safe, reliable, and mission-ready at all times. Ideal candidate will be willing to travel locally and out of state to include overnight stays occasionally. Key Responsibilities: • Inspect, troubleshoot, and repair ARFF vehicles, pumps, foam systems, electrical systems, and chassis components, • Perform preventive maintenance and safety checks per NFPA and OEM standards, • Document all work performed, parts used, and inspections completed, • Work closely with airport operations and fire departments to schedule maintenance and minimize downtime, • Maintain compliance with FAA, NFPA, and OSHA regulations, • High school diploma or equivalent required; technical school or ASE certifications preferred, • 3+ years of experience as a heavy truck, fire apparatus, or diesel mechanic (ARFF experience highly desirable), • Strong knowledge of hydraulics, electrical systems, diesel engines, and foam suppression systems, • EVT Certifications a plus!, • Ability to read and interpret technical manuals and schematics, • Basic computer skills for maintenance logging, • Valid drivers license (CDL preferred or willingness to obtain), • Competitive pay based on experience, • Comprehensive benefits package (medical, dental, vision, 401k with company match), • Paid time off and holidays, • Ongoing training and professional development, • Opportunity to support life-saving equipment and make a real impact

Job Description Warehouse/Shipping/Receiving/Deliveries Organized person with mechanical aptitude & ability to multi task for position in a fast paced warehouse. Duties include: receiving and stocking material, picking and filling customer orders, building maintenance and local deliveries. Must be computer literate. Minimum 2 yrs experience and clean driver's license. Excellent compensation & benefits. Please mail resumes and cover letters to PO Box 6967, Syracuse, NY 13217 Company DescriptionEdward Joy Electric is a locally owned electrical and lighting distributor serving Central New York. We take pride in providing quality products, excellent service, and a supportive team environment.Edward Joy Electric is a locally owned electrical and lighting distributor serving Central New York. We take pride in providing quality products, excellent service, and a supportive team environment.

Job DescriptionLifestyle Apartments Syracuse is Hiring Maintenance Technicians! The Maintenance Technician's primary duty is to perform repairs and conduct preventative maintenance throughout the apartment community. Schedule: Full Time; Monday-Friday 9a-6p; rotational on-call weekend shifts Job Type: Full-time Compensation: Starting at $21+/hour; commensurate with experience Benefits: PTO, Holiday Pay, Health Insurance after 60 days About you: • 3+ Years of Property Management Maintenance Experience, • General knowledge of plumbing, Electrical, HVAC, carpentry, appliance repair, • EPA Certified is a bonus, • Positive attitude with strong verbal communication skills: will work with a variety of staff, residents, and vendors, • Reliable Transportation, • Available for duty on a rotational basis for after-hours emergencyEducation & Experience, • Responds to all assigned maintenance work orders during the regular day, giving priority to any emergency, • Resolves all maintenance problems that arise during the work, • Reports to the Maintenance Supervisor or Property Manager any repair problems that cannot be fixed during the work, • Completes regularly scheduled maintenance activities as assigned by the Maintenance Director., • Performs general clean-up of the apartment community on an "overload", • Reports all acts of vandalism, destruction of property, and suspicious persons observed within the community to the Property Manager or other designated, • Is available for duty on a rotational basis for after-hours emergency, • Assists in maintaining all electrical, plumbing, appliances, and mechanical, • Follows dress code policy, including selection of outfits from the designated corporate clothing catalog. Maintains a clean, neat, professional appearance at all, • Keeps shop and storage areas in neat and well-organized, • Provides high-quality customer service when interacting with, • Completes grounds work as directed by supervisor, which may include picking up trash, sweeping curb and dumpster areas, and maintaining landscaping beds and other, • Assists in monitoring all work being performed by outside contractors., • Monitors and maintains all building systems as, • Assures safety standards are used which comply with all company, local, City, State, and Federal, • Ensures compliance of all work-related activities in a fair, ethical, and consistent, • Other duties as assigned, • Ability to lift up to 50lbs, • Ability to climb multiple flights of stairs and walk the property MdIGbwoYro

Job DescriptionDescription: Job Summary: As a full time, Industrial Maintenance Technician, you will work hands-on with robotics, manufacturing machinery and help with process improvements. The industrial maintenance technician is responsible for the ongoing maintenance of all production manufacturing machinery to include troubleshooting and completion of required preventive maintenance. Requirements: Essential Functions of Position: · Install, inspect and maintain machines and electrical equipment and carry out preventive maintenance to ensure that industrial machines remain operational. · Maintain all company equipment in top working condition by scheduling all repairs, keeping up on recommended maintenance and diagnosing any issues that appear. · Review quality standards of each product to make sure there are no problems; test all materials extensively to analyze how each item meets the standard. · Make recommendations to company leaders to have the best use of production timelines, equipment and supplies; give details about what the company’s manufacturing goals should be in the months or years ahead. · Summarize all data, documentation and information related to the production system in a detailed report for internal use. · Act as a Liaison with a team of machinery operators, managers and product developers to ensure everyone is contributing to the common goal. Develop alternative methods of making manufacturing practices more efficient and cost effective; look at space constraints, material requirements and current needs in order to improve. Minimum Qualifications: · Ability to operate machinery and technical equipment. · In-depth knowledge of system maintenance · Ability to lift and move heavy equipment. · Familiarity with safety standards and regulations Preferred Qualifications: · Associate's degree in mechanical engineering or similar field or related certifications · 3 years’ experience working as a maintenance technician. · 2 or more years working in a large corporate manufacturing plant. · Knowledge of computer design and engineering software · Excellent attention to detail and time management · Ability to provide feedback both orally and in writing. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · Occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. · Comfortable in chemically Hazardous Situations. · Being mindful of chemical safety and use proper PPE when required.

Job Description Maintenance Repair Technician (CNC) – 2nd Shift Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Manufacturing - Production Compensation Range: $72,508 Job Type: Full-Time About the Opportunity: Join a leading manufacturer in the electrical and power management industry as a CNC-focused Maintenance Repair Technician on 2nd shift. This is a hands-on opportunity at a high-tech facility in Syracuse, where you'll apply both mechanical and electrical expertise to maintain and troubleshoot advanced CNC equipment. Ideal for mechanically inclined professionals with a background in industrial maintenance and machining. What You’ll Do: • Diagnose and repair complex mechanical and electrical issues on CNC and industrial machinery., • Tear down, inspect, and rebuild machines following safety and operational standards., • Troubleshoot electrical systems using ladder logic, schematics, and testing procedures., • Conduct electrical test operations and make necessary adjustments for performance., • Perform preventive and corrective maintenance across various production equipment., • Interpret complex blueprints, manuals, and circuit diagrams., • Communicate abnormal equipment conditions to supervisors., • Support production continuity by ensuring minimal machine downtime., • Use sound judgment when working from instructions, procedures, or schematics., • Work from 2:30 PM to 11:00 PM, Monday through Friday. What You Bring: • High school diploma or equivalent required, • Minimum of 3 years manufacturing maintenance experience, • (or 1 year with a relevant technical degree or military background), • Proficiency in reading ladder logic and industrial motor control schematics, • CNC maintenance and troubleshooting experience required, • Background in machining and electrical systems strongly preferred, • Experience with hydraulics is a plus, • Strong problem-solving skills and ability to work independently What’s Offered: • Base salary: $72,508, • Full benefits package, • Relocation assistance available, • Interview travel reimbursement, • Stable 2nd shift schedule, • Opportunity to work with cutting-edge manufacturing technology Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link:

Job Description BROAD FUNCTION: Assist with general maintenance duties to include routine installation, inspection, maintenance, and repair of electrical, mechanical, and plumbing systems, etc., to maintain the facility grounds and equipment, and building elements. Hours: Full Time. 37.5 hours a week. Monday-Friday 9a-5p and every other weekend. MAJOR DUTIES AND RESPONSIBILITIES: 1. Assist maintenance mechanics with daily operations in a safe and efficient manner in accordance with current applicable Federal, State, and local standards, guidelines, and regulations, as well as the facility's established policies and procedures on a multitude of plumbing, electric Steam, air handling, refrigeration, and building., 2. Daily air and water temperatures in accordance with Department of Health regulations., 3. Removes trash from parking lot and outdoor garbage receptacles., 4. Removes recycling and shredding documents in accordance with facility procedure., 5. Assists with minor or large paint projects as directed., 6. Assists mechanics with plumping, HVAC, and electrical repairs as directed., 7. Assure that work areas and corridors etc. are clean and free of hazardous conditions and that tools, supplies, etc. are properly stored before leaving such areas on breaks, end of work day, etc., 8. Report all unsafe/hazardous conditions, defective equipment, breakdowns, incidents/accidents, etc., to your supervisor immediately., 9. All other related duties as assigned by supervisor. PHYSICAL REQUIREMENTS: Ability to repetitively lift 25 — 50 lbs., push / pull up to 250 lbs., repetitively reaches above head, climb etc. MINIMUM QUALIFICATIONS: High school graduate or GED Benefits: • Dental insurance, • Health insurance Work Location: In person

Job DescriptionWhat you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic, • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisionsRequired (Basic) Qualifications:, • Must have a high school diploma or equivalent from an accredited institution, • Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade, • Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading., • Authorized to work in the United States without Company sponsorship. Preferred qualifications:, • CNC Maintenance experience, • Background in machining and electrical equipment, • Two-year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics

Job Description Boiler Operator – Manufacturing Plant Location: Syracuse, NY Industry: Manufacturing & Production Job Category: Skilled Trades / Maintenance Compensation: $70,761 annually ($34.02/hr) Job Type: Full-Time, 1st Shift (6:00am–2:30pm) About the Opportunity Eaton’s ES GEIS CHD division is hiring a Boiler Operator to join its Syracuse-based team. In this critical maintenance role, you'll operate and maintain complex powerhouse systems including high-pressure boilers, steam stations, and compressed air systems. This is a strong opportunity for someone with hands-on experience in industrial facilities, especially those who enjoy troubleshooting mechanical and electrical components. What You’ll Do ● Operate, install, and repair high-pressure steam boilers, air compressors, and associated equipment ● Perform mechanical and electrical maintenance on pumps, motors, and power generation systems ● Troubleshoot both analog and digital control systems ● Conduct chemical tests to ensure boiler performance and safety ● Read and interpret electrical/plumbing diagrams and mechanical blueprints ● Use hand tools, pipe fitting equipment, torches, and soldering tools as required ● Maintain energy management systems, including time schedule entry and updates ● Repair and replace piping systems carrying steam, water, gas, compressed air, and oil What You Bring ● 3+ years of experience with steam boilers, air compressors, motors, pumps, electrical equipment, and pressurized piping ● Proficiency in reading schematics and mechanical blueprints ● U.S. work authorization required Preferred: ● Experience in manufacturing or industrial environments ● 5+ years in a powerhouse technician role ● Mechanical troubleshooting and equipment repair skills What’s Offered ● 401(k) with employer contribution ● Day-one Medical, Dental, and Vision coverage ● Paid Time Off – Vacation and Holidays ● Employee Assistance Program

Job Description Screw Machine Maintenance Mechanic Job Summary: The Maintenance Mechanic is responsible for performing preventative and responsive maintenance on production machinery. The Maintenance Mechanic will troubleshoot and make repairs to Hydromat, ACME, and Davenport Screw Machine equipment as well as CNC and manual production to support our facility. Shift: 2nd Shift, Monday through Thursday , 3pm until 1am Pay Range depending on Experience: $25.00 - $40.00 plus a 10% shift differential = $27.50 - $44.00 Benefits: Temp to Hire Weekly Pay Benefits once hired on Increase your skill sets working for this World Leader in its field Job Duties and Responsibilities included but not limited to: Performs mechanical maintenance of all Machining Dept machinery and equipment. Provides emergency/unscheduled repairs of production equipment during production and performs scheduled and preventative maintenance repairs of production equipment. Uses troubleshooting to effectively and efficiently repair production machinery using skills including mechanical, electrical (up to 480 volt 3 Phase), pneumatic, and hydraulics. Engages in successful troubleshooting, promptly and accurately gathering relevant information (equipment manuals, blueprints, work orders, and communication with coworkers). Designs, fabricates, and welds parts to support manufacturing, to include but not limited to the welding of repairs to equipment. Complies with OSHA and ARC Flash regulations Uses web-based work order system. Fills out maintenance work orders in database and initiates requests for replacement spare parts as needed. Must be able to flex hours for training purposes and major projects within the plant. Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations Assists with daily support to the Screw Machine department as needed Performs all other duties as assigned. Requirements: Education & Experience: High School Diploma or GED with skilled trades courses desired combined with 5 years of experience in a manufacturing or industrial setting 3-5 years of experience in fabrication and welding preferred Prior relevant machine maintenance experience to include CNC, Hydromat, Acme and Davenports preferred. Knowledge: Ability to read, write, and communicate in English. Strong computer skills to include Microsoft Office Suite and experience with web-based work order systems. Must possess skills/knowledge of Industrial Electrician to read and comprehend electrical blueprints and schematics to install, troubleshoot, conduct preventative maintenance and perform repairs to facilities and production equipment to 480 Volts, 3-Phase. Proficient blueprint reading skills. Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision. Knowledge and ability to use hand and power tools. Proficient and well-rounded technical capacity. Experience with work-order systems, preferably web-based systems. Ability to become forklift certified. Ability to work effectively in a team environment in a culturally diverse workplace. Knowledge in PLC’s and CNC controls What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration!

Job Description Why NYCANNA, LLC? NYCANNA, LLC, DBA THE BOTANIST is a subsidiary of Canopy USA, LLC, a leading vertically integrated, multi-state operator in the United States cannabis industry. With the transition of Acreage Holdings to Canopy USA, LLC in December 2024, Canopy USA, LLC is now positioned to consolidate operations across its three business units – Wana, Jetty, and Acreage – realizing synergies, cost savings, and supporting growth in state-legal markets across the U.S. Through coverage of key market segments including flower via Superflux, vape and concentrates via Jetty, edibles and beverages via Wana, and retail through The Botanist, Canopy USA, LLC is well positioned to accelerate growth with an emphasis on the Midwestern and Northeastern U.S. markets. As newly formed Canopy USA, LLC, we are building a stronger, more agile organization that will unlock greater opportunities across the growing US cannabis market. Who you’ll work for : NYCANNA, LLC, DBA THE BOTANIST Our Culture: Here at Canopy USA, LLC, we believe in people first. We value our people and encourage continuous opportunities to learn, develop, and grow. We pride ourselves in innovation and passion for the cannabis industry. We are always looking for motivated people who share our vision to join our team. Think you have what it takes? Then come grow with us! About the Role Facilities Technician: The Facilities Technician (FT) provides the daily care and focused attention necessary to maintain a clean, efficient, and operational environment within the facility. FT will perform inspections, maintenance, and repairs on the cultivation facility and machinery as directed by the on-duty supervisor. FT will provide meaningful feedback to leadership to ensure maintenance is real time, strategic, and executed seamlessly within the operation. FT will interact with vendors and contractors to ensure all jobs leverage the appropriate level of expertise. Duties and Responsibilities: The main responsibilities of the Facilities Technician include all aspects of the facility and the departments within in terms of addressing the respective maintenance and repairs necessary to maximize production and prevent failures while maintaining the highest levels of cleanliness and sanitation inside the facility and production areas. • Responsible for daily sanitation procedures including bathrooms, hallways, break areas, and anything inside/outside of the facility., • Restocks all PPE (Personal Protective Equipment), trash, and restroom supplies throughout the building daily., • Perform minor repairs of all buildings and equipment with minimal supervision including but not limited to grow lights, fans, HVAC, plumbing, electrical, etc., • Perform major repairs at the direction and under the supervision of the Facilites Manager. Major repairs may include working alongside and coordinating with external contractors or licensed tradesmen. Repairs can include emergency situations and/or scheduled repairs., • Responsibly use and/or operate vehicles, tools, materials, parts, maintenance supplies and equipment when necessary and ensure that they are used safely, effectively, and efficiently., • Install and maintain new equipment (assembling racks, installing dehumidifiers, etc.) as directed by the Facilities Manager., • Troubleshoots minor maintenance issues involving electrical, structural, plumbing, and equipment., • Follow maintenance and repair schedules set forth by the Facilities Manager and ensure routine maintenance is performed in a timely and efficient manner., • Scheduling maintenance when the scope is outside realm of expertise, but continuously learning from contractors to eliminate the need for outside services when possible., • Other duties as assigned; scope of the job may change as necessitated by business demands., • Undertake occasional custodial and janitorial tasks (shoveling snow from the sidewalk), • Wash the employees’ uniforms in our onsite washer/dryer area and sorts by employee ensuring that employees have clean uniforms for their shift every day., • May help in other departments as needed/Other duties as assigned. Administrative Duties: • Maintains accurate records of repairs, equipment cleaning, maintenance and calibration and any other facility systems related logs assigned by on-duty supervisor., • Promptly reports any system failure, malfunction, or facility damage to the Facilities Manager, • Assists with the completion of daily, weekly, and monthly checklists on building equipment, and maintenance procedures, • Must be able to adhere to facility SOPs. Additionally: Assist in the completion of secondary Facilities tasks according to company needs. Follow all aspects of the workplace safety program, biosafety program, and maintain compliance with all rules and regulations. And maintain a clean and safe environment on the production floor. Education and/or Work Experience • High school diploma or equivalent experience required. A Bachelor’s Degree preferred., • Minimum of 2 years of experience in building and mechanical equipment maintenance and repair preferred., • A strong knowledge of trades- plumbing, electrical, carpentry, drywall, tile, miscellaneous repairs and maintenance or an acceptable equivalent combination of education and experience., • Knowledge of the marijuana industry strongly preferred or other highly regulated industry., • Work history showing flexibility and willingness to accept additional projects or challenges. Mandatory Qualifications: A successful candidate will need to be at 18 years of age and in compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States. Must complete State and Federal background checks and fingerprinting. Additional Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Knowledge: • Basic Math required for inventory, projections, and measurements., • Knowledge of use and maintenance of industrial cleaning equipment and appliances Skills and Abilities: • Excellent time-management skills; Ability to effectively plan and prioritize, • Ability to maintain confidentiality; Absolute reliability and honesty, • Ability to focus; Attention to detail, • Ability to work effectively as part of a team; Ability to communicate clearly and calmly, • Ability to remain calm in periods of high stress or unusual activity, • Skill at using computers, • Mechanical skill Perks & Benefits: · Full suite of medical, dental, and vision insurance · Paid parental leave · 401 (k) · Paid Time Off · Short Term and Long-Term Disability · Employee Assistance Program · Employee life insurance and supplemental life · Spouse and child life and ADD&D · Pet insurance · FSA and HAS available *Based on eligibility. Schedule: · Day Shift **Subject to change as business needs. Work Environment and Physical Demands: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be requested to enable individuals with disabilities to perform the essential functions. Manufacturing environment that requires extended time standing, walking, bending and reaching. Ability to carry up to 50lbs for up to a distance of 100ft may be required. Occasional extended and repetitive use of arms, hands and fingers to cut and manipulate small objects. Ability to work in a humid and pollinated environment. • Extended time standing, walking, bending, and reaching, • Ability to lift and carry up to 50 pounds for a distance of 100 feet, • Close visual focus required, • This position occasionally requires the extended and repetitive use of arms, hands, and fingers to cut and manipulate small objects., • Must wear company-provided lab coats, hair/beard nets, gloves, surgical masks and safety glasses/ goggles/ splash shield, while working in the lab., • Must adhere to the Syracuse facility general hygiene requirements. E-Verify Participation Notice This Employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. What is E-Verify? E-Verify is an internet-based system that compares information from and employee’s Form I-9, Employment Eligibility Verification, to data from the U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. Code of Conduct: All employees are expected to represent the values and maintain the standards contained in the Code of Conduct. NYCANNA, LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in [Insert Entity Name]. If you need assistance with completing an online application due to a disability, please send a request to . Please be sure to include “Accommodation Request” in the subject line.

Job DescriptionStaffing Network is seeking Plant Maintenance Technicians for a large Waste facility located in LIVERPOOL New York 13090. $22/hr.9am-5:30pm (Monday – Friday)Must be open to transitioning to Monday-Thursday 2pm-10:30pm, Friday 12pm-8:30pm.Resume required Interview required Job Summary • Responsible for monitoring and maintaining the operation of all plant systems and equipment. Including but not limited to balers, conveyor belts, gearboxes, electrical motors, pulleys, shafts and bearings., • Respond to all system failures by taking appropriate corrective action by completing or assigning the repairs needed to ensure that systems are operational and are functioning safely and efficiently., • Performs repairs in accordance with Waste Management Safety and Life Critical Rules and OSHA. (Occupational and Safety Health Act) requirements., • Performs preventive maintenance inspection (PM); diagnose, repair, and rebuild major equipment/components including but not limited to balers, conveyors, hydraulic power packs, eddy currents, electro-magnetic belts, optical sorters, diverters, compressors, trash compactors, motors, glass breakers, wire tie systems, fans, pumps, forklifts, front-end loaders and building equipment., • Maintains DEI (Daily Equipment Inspections) backlog., • Establishes and adjusts work procedures to meet production schedules and advises Sr. Plant Maintenance Manager if additional work is needed or cannot be completed within the Standard Repair Times (SRTs). . Inspects the quality of third-party repairs and or rebuilds., • Recommends measures to improve production, equipment performance and product quality., • Ability to multi-task and manage multiple priorities., • Performs service calls for emergency breakdowns., • Ability to perform under limited supervision., • Requires a flexible work schedule, which may include nights and weekends to support operating schedule and the needs of the facility., • Maintains a clean, safe work area in compliance with Corporate/OSHA Standards, and performs all work in accordance with established safety procedures. #ZRDFW

Job Description Calling all Maintenance Mechanics in the Syracuse, NY area! We have an amazing opportunity that you can't pass up! Excellent pay and benefits! Ideal candidate will need the following skills: * Able to Troubleshoot, do repairs, installs, and able to take apart/put together all types of machinery and all the production equipment. * Installs and maintains air compressors, plant air circulation systems, cooling and heating units, and plant lighting. * Must know how to take apart, rebuild and overhaul the different types of equipment. * Perform preventative maintenance on electrical systems, all equipment and facility as needed. * Able to analyze blueprints and different schematics. * Perform manual/mechanical functions by repairing the equipment and to meet customers specifications. * Comply with all on the job safety policies and procedures. * Able to diagnose any type of problem and fix the problem within a reasonable amount of time. Requirements: * 3-4 years of experience as a Maintenance Mechanic at the minimum. * Must have working knowledge of the different types of equipment, any mechanical devices, ACDC motors, different computers, and inspections as well as different transmission systems. * Able to train other employees. * Ability to use different power tools and hand tools. * Must know how to use electronic test equipment. If you have experience as a Maintenance Mechanic, we want to hear from you! Please apply to this posting and a member of our recruitment team will reach out to you!

Job DescriptionWhat you’ll do: • Perform all required duties to diagnose and correct electrical, hydraulic, pneumatic and mechanical malfunctions on automated foundry production equipment or machinery., • Check sequence of machine operation, determining type of machine malfunction, making necessary repairs, readjusting and testing instruments and machinery to manufacturer’s standards, within established limitations., • Duties include the altering, repairing, adjusting and/or piping of water, air, gas, oil, etc. to meet foundry equipment specifications and/or correct machine malfunctions as required. May be required to generate shop orders., • Work from shop orders, blueprints, schematics, operational manuals, verbal information, manufacturer’s specifications, etc., • Detect and correct machine malfunctions and refer questionable cases to proper supervision., • Locate, issue and record a variety of items such as raw materials, parts, tools and equipment from the maintenance tool crib., • Operate fork truck as required in performance of job duties., • Maintain work area in a clean and orderly condition., • Follow standard or prescribed safety regulations.Qualifications: What you’ll do:, • Perform all required duties to diagnose and correct electrical, hydraulic, pneumatic and mechanical malfunctions on automated foundry production equipment or machinery., • Check sequence of machine operation, determining type of machine malfunction, making necessary repairs, readjusting and testing instruments and machinery to manufacturer’s standards, within established limitations., • Duties include the altering, repairing, adjusting and/or piping of water, air, gas, oil, etc. to meet foundry equipment specifications and/or correct machine malfunctions as required. May be required to generate shop orders., • Work from shop orders, blueprints, schematics, operational manuals, verbal information, manufacturer’s specifications, etc., • Detect and correct machine malfunctions and refer questionable cases to proper supervision., • Locate, issue and record a variety of items such as raw materials, parts, tools and equipment from the maintenance tool crib., • Operate fork truck as required in performance of job duties., • Maintain work area in a clean and orderly condition., • Follow standard or prescribed safety regulations.Qualifications:Required (Basic) Qualifications:, • High school diploma or equivalent from an accredited institution., • Minimum three (3) years of industrial mechanical maintenance experience, • Knowledge of D.C. and A.C. electrical theory; pneumatic and hydraulic theory and practice; plumbing and piping repair theory and practice; machine repair theory and practice involving theory and practice involving close tolerance assembly and fits., • Experience in the use of measuring instruments and devices., • Experience in the sequence and intra-relationship of machines operations including the evaluation of pressure, flow and dimensions in all machine functions., • .Preferred qualifications:, • Minimum (5) five years of industrial maintenance experience or the equivalent to Journeymen level experience., • Forklift experience.

Job Description Job Details: · Tear down, determine extent of troubles, repair damaged electrical or replace worn or defective parts and reassemble following standard and prescribed safety regulations. · Need a basic understanding of PLC logic · Adjust equipment to required specification and check to assure effective operation. · Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory. · Perform electrical test operations. · Work from complex schematic diagrams, manuals and testing procedures. · Troubleshoot all defective printed circuit assembly boards. · Perform similar or associated electrical or mechanical duties as directed. · Detect and report all unusual cases to proper supervision. · Use of judgment to comply with instructions or prescribed routines and to make decisions Qualifications: · Must have a high school diploma or equivalent from an accredited institution · Journeymen or three (3) years of manufacturing maintenance experience in an industrial electrical/mechanical trade · Experience with ladder logic circuit diagrams, industrial motor control schematics, and blueprint reading. Work Hours > 2:30pm to 11:00pm.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Metrology Technician (Instrumentation Technician) is responsible for the installation, calibration, maintenance, troubleshooting, and repair of complex laboratory, process, and utility instrumentation in a cGMP facility. Working in a primarily paperless environment, this role collaborates closely with Maintenance, Operations, and Automation teams to ensure equipment reliability. This position handles moderately complex assignments, requiring sound judgment in problem-solving and making routine recommendations to management. While routine tasks are performed independently, general instructions are provided for new assignments. Duties & Responsibilities • Perform preventative maintenance, customer request, and corrective instrumentation work orders in support of the LOTTE BIOLOGICS Syracuse bio campus., • Perform instrumentation work on liquid level, temperature, pressure, liquid flow, gas flow, speed, control valves, I/P transducers, solenoids, PLC's, distributed I/O systems, and other manufacturing and utility system instrumentation., • Support commercial manufacturing through participation on day shift, generally Mon-Fri 7am-3p. Participate in subject to call program to support off hour's emergency work., • Maintain assigned area of ownership within the facility to support inspection readiness and general facility upkeep for support of commercial manufacturing., • Utilize an electronic maintenance work order system to document all performed work in compliance with regulatory requirements., • Operate within regulatory governed facility in regards to documentation management, training compliance, deviation management, procedure adherence, and corrective/preventative action implementation., • Crosstrain to support integrated mechanical maintenance, critical utilities, and instrumentation team., • A minimum of two years of experience in calibration and instrumentation, applying principles and practices., • Proven ability to work effectively in team environments, contributing to shared goals through collaboration and accountability., • Proficiency with Maximo or similar computerized maintenance management systems (CMMS)., • General understanding of operating principles of industrial instrumentation and control systems., • General knowledge of P&IDs control theories and techniques and have ability to read, interpret, and troubleshoot engineering drawings, P&IDs, and electrical schematics with assistance when needed., • Knowledge of basic relay ladder logic, programmable logic controllers, and distributed control systems., • Knowledge of DeviceNet and Foundation Fieldbus instrumentation, DeltaV distributed control system, and Rosemount's A.M.S. Software desired., • Comprehensive knowledge of instrumentation calibration and maintenance for biotech manufacturing equipment., • Demonstrated ability with common computer tools such as word processing, spreadsheet, and web-based applications., • Work experience where attention to detail and personal accountability were critical to success., • Demonstrates good interpersonal skills, customer focus, and professionalism., • Self-motivated with strong work ethic and continuous improvement mindset., • This position is located a medium scale manufacturing facility with classified areas requiring appropriate personal protective equipment (PPE)., • This role will require contact with hazardous materials such as caustic, acids and steam., • Frequent bending twisting, squatting, kneeling, climbing, and reaching is required. Role also requires frequent unassisted lifting (not to exceed 50 lbs.)., • This position may require the employee to work in areas where chemical, biologic, and environmental risks are present. 5% Work Location: East Syracuse, NY New York Pay Range$22.60—$31.73 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionThis position is based at our Syracuse, New York facility with core hours of 2:30pm to 10:30pm. What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode), • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisions. Qualifications:Required (Basic) Qualifications:, • Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mechanical trade, • Authorized to work in the United States without Company sponsorship., • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. Preferred qualifications: • Four (4) years or more of documented maintenance experience in an industrial electrical/mechanical trade preferred, • Background in machining and electrical equipment, • Two year degree in electronics with mechanical experience/Military electronics experience.

Job DescriptionUtility Maintenance Mechanic Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range - $31.00- $41.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment 6750 Benedict Road W East Syracuse, NY 13057 N2 – 6pm-630am. Job Overview The Utility Maintenance Mechanic plays a key role in executing assigned maintenance tasks. This includes performing full- breakdowns and rebuilds of facility equipment as well as performing preventative maintenance on all facility equipment. Key Responsibilities • Maintain and repair facility utility systems including boilers, steam distribution networks, compressed air systems, and water treatment equipment to ensure reliable operation of critical infrastructure supporting dairy production processes., • Monitor and service refrigeration and ammonia cooling systems, including compressors, evaporators, condensers, and associated piping, ensuring proper temperatures for milk storage, processing, and finished product preservation while following ammonia safety protocols., • Perform maintenance on electrical distribution systems, lighting, emergency generators, and power transmission equipment, troubleshooting electrical issues and coordinating with electricians for complex repairs to maintain facility power reliability., • Operate and maintain wastewater treatment systems, including biological treatment processes, clarifiers, and effluent monitoring equipment to ensure compliance with environmental discharge permits and regulatory requirements., • Conduct routine inspections and maintenance of HVAC systems, ventilation equipment, and building infrastructure including roofing, plumbing, and structural components to maintain sanitary conditions and regulatory compliance in food processing areas., • GED or High School is preferred., • Minimum 2-3 years’ experience within the mechanical field., • Experience with programmable logic controllers, instruments, and controls. Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionWhy Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle is seeking an Operations Manager in Syracuse/Rochester, New York who will be responsible for managing the day to day activities of a branch while evaluating current and proposed systems and procedures. Recommends changes when necessary and assists in the implementation of new processes. This individual will perform a variety of tasks while leading and directing the work flow of others. The Operations Manager reports to the Branch Manager and Corporate Operations. This individual must be able to travel to both branches in Syracuse and Rochester. What You’ll Do: • Audit and standardize all system processes and procedures, • Interview, hire, terminate, discipline and prepares annual reviews, • Streamline administrative functions for Customer Service, Warehouse, and Sales, • Lead continuous improvement efforts, • Oversee Fiscal accountability and Monthly/Year End Closings, • Inventory Control/Cycle Count, • Oversee Branch Claims:, • Freight, • Insurance, • Workers Compensation, • Manage financial reports:, • Unbilled Tickets, • Cycle Count Adjustments, • Open Sales & Purchase Orders, • Non-stock and Unavailable Inventory Management, • Returns: OERMS/PORMS, • Warehouse Transfer Exceptions, • Order Entry Exceptions (OEIX), • Oversee branch personnel including billing, customer service, warehouse, inventory control, and sales, • Review all daily branch activities, • Training and development of branch personnel, • Payroll, • Facilities Maintenance, • Branch Replenishment, • Employee Sales, Credit Card, Cash, and COD account reconciliation, OEROB (cash balancing report), • Resolving branch disputes with Corporate Accounting:, • Accounts Payable, Accounts Receivable, Invoice Processing, • Trouble Shooting/Problem Solving, • Record Retention:, • Receipts, Packing Slips, Billing, OEROB, Manifests, • HS Diploma + min 2 Year College Degree or equivalent work experience, • 8+ year of Warehouse Operations experience, • Must have warehouse and staff management experience, • Experience with Warehouse Management Systems preferred, • Must be able to read, count accurately, do simple math (add, subtract, multiply, divide) and write legibly., • Ability to follow and provide directions with emphasis on safety Ability to multi-task and meet tight deadlines Ability to be flexible, • Ability to lift 50 pounds, • Proven Leader with readiness to actively participate in all warehouse activities, • Forklift certified We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description AUTOMOTIVE – HONDA/IMPORT DIAGNOSTIC TECHNICIAN Friendly Auto Group is hiring and we are looking for the best. Are you ready for your career to grow with our organization? Are you looking for ALL NEW equipment to work with? Are you a team player? We are called Friendly for a reason! If the answer is yes to any or all apply today! WE OFFER: • Performance based bonus, • Experience based flat rate hourly wage, • Paid training, • Uniforms supplied, • Paid vacation, • Paid sick time, • 401K, • Health and dental insurance, • Accurately diagnose vehicles., • Perform regular maintenance services to customer vehicles., • Communicating effectively with Service Advisors., • Good knowledge of automobiles, • Effective analytical and communication skills, • Basic computer knowledge, • Ability to learn new technology, repair and service procedures, • Ability to operate electronic diagnostic equipment, • Automotive mechanical experience preferred, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Positive, friendly attitude, • Willingness to train a must, • Proficient Electrical Diagnostic

Job DescriptionDescription: Job Description: We are seeking a skilled and motivated Flat Rate Technician to join our team. As a Flat Rate Technician, you will be responsible for diagnosing, repairing, and maintaining vehicles or equipment efficiently and effectively while meeting the standards set for flat rate compensation. You will play a key role in ensuring customer satisfaction by delivering high-quality work in a timely manner. Key Responsibilities: • Diagnose and repair vehicles or equipment based on customer complaints and service needs., • Complete repair orders and maintain accurate records of work performed., • Work efficiently to meet flat rate times and achieve maximum productivity., • Perform routine maintenance and repairs, including inspections, adjustments, and part replacements., • Provide exceptional customer service and communicate effectively with clients regarding their vehicles/equipment status., • Stay updated with the latest industry techniques, tools, and technologies to perform repairs., • Ensure compliance with safety regulations and company standards., • Proven experience as a Flat Rate Technician or in a similar technical role., • Certification(s) such as ASE (Automotive Service Excellence) is preferred., • Ability to work independently with minimal supervision., • Strong diagnostic skills and the ability to troubleshoot mechanical and electrical issues., • Excellent time management skills and ability to work under pressure., • A valid driver’s license with a clean driving record., • Competitive flat-rate pay based on the services performed., • Opportunities for bonuses and incentives based on performance.

Job Description Manager, Operations Work Location: East Syracuse, NY Reporting to the Senior Manager, Operations, the incumbent will be responsible for directing and supervising the activities of a group of employees (Hydro Technicians and Station Operators) engaged in the construction, operation, maintenance and repair of hydroelectric facilities and associated equipment to insure safe, efficient, and reliable energy production in a manner consistent with operation and regulatory requirements across multiple facilities. Responsibilities • Plan, schedule, direct, coordinate and supervise the activities of the maintenance and operating personnel in the construction, operation, maintenance and repair of hydroelectric facilities to ensure continuity of operations;, • Train subordinates in areas such as best maintenance practices, health, safety, security and environmental compliance and proper power plant and dam operating techniques to educate and improve skill levels;, • Execute and comply with applicable company policies and procedures with emphasis on safety and environmental requirements and takes appropriate action;, • Direct personnel in response to plant emergencies, special safety procedures, and operations related activities;, • Ensure compliance with applicable Federal, State and Local regulations and Labor agreements;, • Project management activities for small to medium size maintenance and construction projects which may include contract personnel or contractors;, • Travel offsite throughout the New York Region;, • Detailed knowledge of safe operating procedures, accident prevention rules, OSHA regulations, company policies, procedures and organization with job related experience;, • Knowledge of hydroelectric operations, maintenance, construction and environmental regulations;, • Working knowledge regarding effective maintenance planning methodologies, preventive and predictive maintenance practices and trouble shooting and failure analysis;, • Candidate must possess strong verbal and written communication and administrative skills;, • Associate’s or Bachelor’s degree (preferred) in mechanical or electrical engineering or equivalent experience to include strong technical understanding of mechanical and electrical engineering design as it relates to large rotating machinery and hydroelectric generation equipment installation;, • 5+ years of supervisory experience, preferably including supervision of trades personnel and contractors;, • Proficiency with Microsoft Office Products including Outlook, Word and Excel;, • Hold a valid US Driver’s License. Company DescriptionBrookfield is a leading global investment firm with over $1 trillion of assets under management. We invest on behalf of institutions and individuals around the world with the goal of helping them to create long-term, sustainable wealth. Our origin as owner/operators of high-quality businesses allows us to leverage our unique operational expertise to grow the businesses we own on behalf of our clients. We put our own capital to work alongside our partners’ in nearly every transaction, ensuring strong alignment of interests.Brookfield is a leading global investment firm with over $1 trillion of assets under management. We invest on behalf of institutions and individuals around the world with the goal of helping them to create long-term, sustainable wealth.\r\n\r\nOur origin as owner/operators of high-quality businesses allows us to leverage our unique operational expertise to grow the businesses we own on behalf of our clients. We put our own capital to work alongside our partners’ in nearly every transaction, ensuring strong alignment of interests.

Job Description Now Hiring: Bowling Technician Location: Apex Entertainment Syracuse Do you have a knack for mechanical systems and a passion for keeping things running smoothly? Apex Entertainment is seeking a skilled Bowling Technician to maintain and service our bowling lanes and equipment. This is a hands-on role where your expertise ensures guests enjoy safe, seamless, and fun bowling experiences. If you're ready to apply your technical skills in a high-energy, guest-focused environment - we want to hear from you! Key Responsibilities: Equipment Maintenance * Maintain and repair Brunswick GSX pinsetters, Custodian lane machines, scoring systems, ball returns, bowling balls, and related components * Perform routine service and preventative maintenance on all bowling equipment * Clean, adjust, and troubleshoot automated scoring systems Parts & Repairs * Identify and order necessary replacement parts and supplies * Perform major overhauls and rebuilds as needed to keep equipment in top condition Budget & Planning * Assist in planning and managing service and maintenance budgets * Contribute to long-term repair and improvement plans for bowling equipment Record Keeping & Training * Keep accurate records of maintenance, repairs, parts usage, and equipment performance * Train and supervise hourly pin chaser staff on basic equipment care and safety Skills & Qualifications: * High school diploma or GED required * Minimum 2 years' experience maintaining and repairing bowling and pinsetter equipment (Brunswick preferred) * Completion of a Brunswick training program is a plus * Must be at least 18 years old * Strong mechanical and electrical troubleshooting skills * Ability to use hand tools, power tools, lubrication and testing equipment * Must be safety-conscious and able to work independently Physical Requirements & Working Conditions: * Able to lift/carry up to 50 lbs multiple times per shift * Comfortable with tasks involving sitting, standing, walking, bending, kneeling, reaching, and twisting * Will work primarily indoors with occasional exposure to extreme temperatures or loud noise * May face risks associated with mechanical or electrical equipment Perks & Benefits: * Join a dedicated team that values service and fun * Competitive pay and career advancement opportunities * Free access to attractions * 50% off select food items * Flexible scheduling that supports work-life balance Ready to keep the lanes rolling and guests smiling? Apply now to become a Bowling Technician at Apex Entertainment - and help create unforgettable moments behind the scenes!

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC package units on Cell Tower Sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside in the Syracuse, New York area. Core Responsibilities • Maintaining commercial package cooling systems on Cell Phone Towers – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred. At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside in the Syracuse, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds). At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description Frazer and Jones are looking to add an Electrician to our Maintenance Department. Under the direction of the Maintenance Manager or Foreman, the electrician performs both preventative and reactive maintenance on various machines and equipment throughout the foundry. Essential Job Functions: • Able to read, write and analyze electrical schematics and wiring diagrams., • Use all types of testing instruments., • Must have broad knowledge of electrical principles, wiring specification codes and handbook formulas along with a working knowledge of PLC’s, VFD’s, Motor Control, and Power Distribution., • Determine proper type, size of materials and equipment for the job, including power requirements., • Perform electrical work requiring high degree of trade skill to install, test, inspect, adjust, repair and wire all plant equipment and circuits to required voltages and tolerances., • Able to locate, diagnose and remedy troubles quickly to avoid shutdowns., • Adjust all plant equipment to proper operating characteristics., • Able to fabricate material to be used for electrical equipment., • Operate shop trucks for handling materials., • Requires a high school diploma or equivalent., • Associate degree in electrical engineering or alike field is preferred., • Trade certifications from organizations such as BOCES or MACNY highly desirable., • Requires a minimum of 2 years’ experience in an alike role., • 3-5 years’ experience in a manufacturing setting, especially a foundry, is highly desirable. Pay and Benefits: • $34.17 - $36.88 per hour., • Overtime after 8 hours in a day and after 40 hours in a week., • Medical, Dental and Vision insurance, • Company paid short-term disability and life insurance., • 401k with 3% company match available upon hire., • Paid time off and holiday pay after 30 days of service, vacation after 1 year., • Union membership.

Job Description Responsible for work in the maintenance and repair of vehicles and heavy equipment used in fleet operations. Driver's license is required. 2-3 years of mechanical experience is required. Hydraulics experience is preferred. Experience with repairing specialty equipment such as Jarraffs is preferred. You will be responsible for troubleshooting issues and fixing them, aiming for maximum reliability and functionality as well as helping around the yard and driving a truck half of the time. This position requires you to work at the shop and in the field locally as needed. The Ideal candidate will have their own tools. Essential Job Functions: • Completes computer-based repair orders, reviews repair orders to ensure accuracy and completeness, and evaluates the work upon completion; maintains communications with clients on repair status., • Performs diagnostics, preventative maintenance, and repairs on a wide variety of Kendall vehicles and equipment to include tune-ups, overhauling engines, transmissions, differentials, clutches, brakes, drive trains, generators, computer-controlled fuel injection and emission related equipment, carburetors, air conditioning, electrical, cooling, suspension, pumps, hydraulic systems, and steering., • Performs fabrication, welding, and modification of parts for installation of specialized equipment., • Operates automotive and general shop equipment to include lathes, gas and arc welding equipment, engine analyzers, tire equipment, scanners, and computers; complies with and helps enforce shop safety rules., • Inspects parts for accuracy and condition; assists in the maintenance and security of parts storage facilities., • Operates equipment and drives Kendall vehicles, trucks and equipment as required; tests and/or regularly operates vehicles and equipment; transports vehicles., • Assists with the collection and inspection of fire extinguishers., • Perform inspections and repairs in the field., • Ensures that safety rules and regulations are adhered to, and that the work zone and all equipment are in safe operating condition., • Maintains records of work performed and materials used., • Contributes to the efficiency and effectiveness of the unit's service to its customers by offering suggestions and directing or participating as an active member of a team. Education and Experience: High School diploma/GED; AND successful completion of an accredited program in vehicle repair and maintenance; AND two (2) years of experience in the repair of vehicles and heavy equipment; OR an equivalent combination of education, training and experience. Required Knowledge and Skills: • Methods, techniques, parts, tools and materials used in the maintenance and repair of gasoline- and diesel-powered automobiles, trucks and construction equipment., • Operation and maintenance of a wide variety of hand, power and shop tools and equipment common to the field., • Safe work methods and safety regulations pertaining to the work., • Shop mathematics., • Record keeping practices., • Computer applications related to the work., • Communicating effectively in oral and written forms., • Techniques for dealing with a variety of individuals from various socioeconomic, ethnic and cultural backgrounds, in person and over the telephone. Skill in: • Servicing and performing preventive maintenance and repair for a variety of fleet vehicles and construction equipment., • Diagnosing and repairing a wide variety of vehicles and equipment., • Operating and maintaining a variety of hand, power and shop tools and equipment used in the work., • Using hand and power tools skillfully and safely., • Preparing records and reports of work performed., • Reading and interpreting manuals, specifications and drawings., • Understanding and following oral and written directions., • Estimating necessary materials and equipment to complete assignments., • Using initiative and independent judgment within established procedural guidelines., • Contributing effectively to the accomplishment of team or work unit goals, objectives and activities., • Establishing and maintaining effective working relationships with those encountered in the course of the work. Required certificates and licenses: Continued employment is contingent upon the following required licenses being maintained in active status without suspension or revocation. • Only a Driver’s License is required., • CDL preferred. PHYSICAL DEMANDS & WORKING ENVIRONMENT: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Senior Project Manager, Facilities Engineering plays a key role in driving complex capital projects that enhance and expand our biologics manufacturing capabilities. This individual will lead multiple high-impact initiatives simultaneously—ensuring projects are delivered safely, on time, and within budget while minimizing disruption to ongoing operations. In this role, you'll oversee the design and execution of facility and process-related capital projects such as HVAC and utility system upgrades, laboratory and infrastructure renovations, cryogenic storage expansions, and biologics cell culture or purification improvements. You'll also provide technical guidance to Operations and cross-functional partners to support the introduction of new technologies, including automation, single-use systems, and process analytical tools (PAT). The Senior Project Manager will collaborate closely with Maintenance, Calibration, Validation, Automation, and Facilities teams from project initiation through completion—ensuring compliance with engineering best practices, regulatory requirements, and company standards while driving continuous improvement across site infrastructure. Duties & Responsibilities • Completes regular assignments independently, with minimal supervisory guidance. Seeks assistance as needed for issues not covered by established policies or procedures. Work is reviewed periodically for progress and evaluated upon completion for overall adequacy and results., • Designs and manages multiple facilities-related capital projects (including HVAC and utility systems, process improvements, infrastructure repairs, and renovations) to ensure delivery on time, within budget, safely, and in alignment with client and site requirements., • Ensures all projects comply with good engineering practices, LBA policies, applicable regulations, and codes., • Coordinates projects with site PM/PdM, Calibration, Utilities, and other supporting departments from initiation through closure to ensure systems are properly designed, constructed, and documented., • Coordinates facility-related activities to optimize operations and reliability while minimizing capital expenditures., • Promotes a strong safety culture by ensuring safety is prioritized throughout all project phases and providing leadership to both internal staff and external contractors., • Identifies and implements innovative and cost-effective solutions in project design, functionality, and construction., • Provides recommendations and technical expertise to improve and maintain facilities infrastructure., • Bachelor's degree in Engineering, Construction Management, or a related field required; advanced degree and/or Professional Engineering (PE) license preferred., • 8–10+ years of progressive engineering experience, ideally within facilities, utilities, or capital project environments., • Demonstrates in-depth knowledge of GMP-regulated engineering environments and the delivery of complex capital projects within pharmaceutical manufacturing settings., • Applies strong focus on safety, quality, schedule, and budget adherence while ensuring compliance with good engineering practices, company policies, regulations, and codes., • Effectively manages projects using internal technicians and external contractors, maintaining safety and performance standards throughout all project phases., • Skilled in scoping projects based on client requirements, developing cost estimates, preparing Capital Appropriation Requests (CARs), and creating detailed project schedules., • Possesses a solid understanding of facilities and building maintenance operations, including utilities infrastructure and reliability programs., • Demonstrates working knowledge of regulatory, environmental, GMP/GLP, and OSHA requirements relevant to engineering and construction projects., • Understands the design, construction, and operation of laboratories, manufacturing facilities, office buildings, and utility plants. This role involves both office and field work within a manufacturing environment. This successful candidate in this role must be able to: • Lift up to 50 lbs unassisted and perform physical activities such as crouching, kneeling, crawling, climbing stairs and ladders, and walking on level surfaces., • Perform visual inspections of installations and equipment. This position involves work in a variety of environments, including office and laboratory settings as well as indoor and outdoor plant areas. The role may involve: • Working independently and collaboratively with others., • Exposure to noise, heights, and confined or cramped spaces. <5% Travel Required Target Bonus 16% Work Location: East Syracuse, NY New York Pay Range$91,000—$142,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Automation Engineer is a key member of the Automation team supporting manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Engineer is to lead design, implementation and maintenance efforts for systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require knowledge of both hardware, software and electrical components associated with the equipment the control system. Computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ is also required. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary responsibility is to lead end to end efforts for the design, build, test, and maintenance of the various Allen- Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Lead the design of vendor Rockwell PLC/ BAS roadmaps to align and integrate with site standards and strategies., • Lead the design and build of hardware Control, Remote IO and Power panels as well as end to end loop drawings for device control points., • Work with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Automation PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired., • Hardware & software design, implementation and troubleshooting experience 5+ yrs., • Knowledge of Rockwell Allen Bradley technologies, application and products required. (Studio5000, Factory Talk View SE, Thin Manager, Factory Talk AssetCentre, PlantPAx, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is a combination field and office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based role. Travel <5% of travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey In-Building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking an enthusiastic entry – mid level Construction Manager to join our high performing team of technology professionals in Syracuse, NY. This position encompasses leading installation projects from beginning to end, along with supporting the customer requests for new builds, repairs, and routine maintenance. Primary Responsibilities: • Exercises independent judgment and discretion in overall project management by prioritizing, planning, and tracking project progress while staying within the budget., • Daily field deployment to oversee construction., • Field installation, Coax cable testing/repair, fiber testing/repair, surveys, and coming up with various innovative construction solutions., • Stakeholder updates using the MS Office Suite, • Consults with management to identify customer needs and coordinate project objectives., • Manages the resources performing the construction work including direct reporting staff, matrix staff, and vendor and subcontractor resources, • Create/Update SOP’s (Standard Operating Procedures)., • A valid driver’s license is required, • A high school diploma with 2-5 year of relevant installation/construction experience, a degree in Construction Management, or a combination of education and experience (compensation for this position will be scaled based on the experience and skill level.), • Excellent written and verbal communication skills., • Proficiency with MS Word, Outlook, and Excel., • Must be able to lift objects of up to 50 pounds, • Experience with hand/power tools, and knowledge of various hardware mounting solutions (drilling into concrete, drywall, wood and mounting equipment to various structures), • Commitment to conducting daily fieldwork, entailing around 80% travel, which includes occasional night shifts and out-of-state assignments., • Attention to detail including quality, safety, code, and adhering to customer standards., • This is a full-time position, salaried position with hours of work being: Monday through Friday, 8:30 a.m. to 5:30 p.m., • Ability to work beyond normal work hours to get the job done., • Telecommunication related experience is a plus (but not required), • Electrical/Conduit experience is a plus (but not required), • Strong leadership skills & ability to drive projects to timely completion., • Ability to meet deadlines and work additional hours as needed., • Initiative-taking and able to work effectively with minimal supervision., • Proficiency in written and oral communication; fluency in English., • Ability to multitask in a dynamic environment., • Capacity to work in a fast-paced, high-energy team setting., • Strong problem-solving skills and analytical abilities.

Job Description Job Title: Electrical Engineer Reports To: Maintenance Manager FLSA Status: Exempt Supervisory Responsibilities: No – Individual Contributor Essential Job Functions and Responsibilities: • Electrical engineer must have a strong understanding of electrical manufacturing processes., • Must be able to read, write and analyze electrical schematics and wiring diagrams., • Electrical engineer must have a broad knowledge of electrical principles, wiring specification codes and handbook formulas along with a working knowledge of PLC’s, VFD’s, Motor Control, and Power distribution., • Electrical engineer must have the capacity to analyze a problem from multiple perspective and explore creative solutions., • Must be able to devise testing methods and properties to confirm the functionality of electrical components and systems., • Determines proper type, size of materials and equipment for the job, including power requirements., • Performs electrical work requiring high degree of trade skill to install, test, inspect, adjust, repair and wire all plant equipment and circuits to required voltages and tolerances., • Able to locate, diagnose and remedy troubles quickly to avoid shutdowns and able to adjust all plant equipment to proper operating characteristics., • Fabricates material to be used for electrical equipment., • Performs other related duties as assigned. Required Skills or Abilities: • Ability to work individually or collaboratively on a team., • Utilize precision devices such as voltmeters or other measuring instruments., • Strong organizational skills and attention to detail., • Possesses time management skills with a proven ability to meet deadlines., • Proficient with Microsoft Office Suite or related software. Physical Requirements: • Requires work such as sitting at a desk and computer for periods of time, standing or walking up to 8 hours at a time on hard surfaces., • Must be able to traverse manufacturing plant and warehouse to access a variety of storage spaces and shelving units by stretching, squatting, and/or reaching., • Work is performed in a manufacturing plant with some exposure to environmental factors such as loud noises, odors, variances in temperature or weather and other factors., • Must be able to lift 25 pounds at times without assistance, up to 50 pounds with assistance. Education and Experience: • Requires a bachelor’s degree in Industrial Electrical Engineering or an alike field., • 5-10 years industrial electrical and/or mechanical experience.

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY Why Join Rezolut? At Rezolut, we’re redefining diagnostic imaging services across the Northeast. We focus on delivering exceptional Mammography care, leveraging advanced technology and a patient-first mindset. If you are a GE or Hologic Mammography expert looking for hands-on work, career growth, and the ability to make a real impact, this is your opportunity.What You’ll Do • Lead service, maintenance, and repair of GE and Hologic Mammography systems, ensuring the highest standards of performance., • Perform preventive maintenance, calibrations, quality control (QC), and quality assurance (QA) according to OEM specifications., • Troubleshoot complex mechanical, electromechanical, and electronic issues on Mammography equipment., • Maintain accurate service records and communicate effectively with customers, ensuring rapid resolution of issues., • Collaborate with team members while operating independently in the field., • Travel regularly to customer sites throughout the Northeast.What We’re Looking For, • Strong hands-on experience servicing GE and Hologic Mammography equipment (minimum 2+ years)., • Associate’s degree, OEM Radiology, Electrical, or Technology training preferred., • Proficient with computer tools (MS Word, Excel, PowerPoint, Outlook)., • Excellent problem-solving, analytical, and communication skills., • Self-motivated, adaptable, and able to thrive in a fast-paced environment., • Valid driver’s license with a clean record.Nice to Have, • Experience with other imaging modalities (Ultrasound, MRI, CT, X-ray) and OEM brands such as GE and Hologic., • Customer-focused service experience in a healthcare environment.What We Offer, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJoin us and be a key part of a team that delivers excellence in Mammography imaging across the Northeast.

Job Description Join a world-class organization that values its employees, which is why they have a less than 2% turnover rate. If you currently are an Overhead Crane Mechanic / Technician this is a company you should learn more about. PLUS+ EXCELLENT BENEFITS! What we offer: • Health, Dental, and Vision Coverage, • Paid travel time to/from job sites, • Company vehicle provided for travel to/from job sites, • Meal allowance per day and business expense reimbursement for travel, • 401K% Match, • Time and ½ paid for hours worked after 8 each day as well as hours worked on Sat. and double time for hours worked on Sun. and holidays, • Long- and Short-Term Disability, • Life Insurance, • Paid Vacation & Holidays, • Paid Training, • Growth & Advancement Opportunities, • On-going Training & Development, • Tools and Uniform reimbursement, • Company cell phone provided when traveling to job site Responsibilities: • Read mechanical schematics and perform basic mechanical troubleshooting, • Read mechanical and machinist blueprints, and precision measuring instruments, then document findings on appropriate paperwork, • Perform mechanical and welding type duties on an as needed basis and meet all requirements such as welding specs, rigging, assembling cranes, • Troubleshoot all sizes and types of cranes and mechanically determine problems and take corrective action, • Provide Service Manager with accurate and complete information on mechanical machinery in order to install/replace/order replacement parts, • Minimum 3 year overhead crane mechanic / technician background OR Electrical background, • Experience with crane maintenance preferred, • Ability to complete required nuclear site access, • Experience with motors and gear boxes, • Experience with 3 Phase Motors

Job Description A. Duie Pyle is seeking an experienced, skilled 2nd shift Diesel Mechanic to join our Fleet Maintenance team at our Syracuse, NY shop. This role requires technical skill with heavy duty trucks and is responsible for maintaining, diagnosing, and repairing the company’s fleet. Why Pyle? • Earn $30-$45 per hour based upon experience and skillset, • Weekly pay every Friday via direct deposit – overtime after 40 hours, • $2.00 Shift differential, • 3:00 PM start time, Monday - Friday, • Modern, well-maintained shops with new equipment, • Company-funded Tool Reimbursement Program, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability Diesel Mechanic qualifications: • Minimum of 2 years’ experience repairing/maintaining Class 8 trucks, • A complete set of hand tools for heavy truck repair, • Vocational or Technical Training in diesel/heavy-duty vehicle experience; HS Diploma or equivalent preferred, but not required, • Willingness to learn and grow your abilities, • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.