Maintenance mechanic jobs in Edison, New JerseyCreate job alerts

Job Description While we may not have an immediate opening for this role, we welcome your interest and can contact you when a job is available. Hours/Shift: • Hours/Shift: 1st Shift from 6:00am – 2:30pm, • Hours/Shift: 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As a Machine Operator, you will perform skilled work in the setup, operation, basic maintenance and repair of manufacturing and/or packaging equipment to safely and effectively produce Temperature Control Packaging and related goods as per quality policy and manufacturing Procedures. • Setup and operate manufacturing and/or packaging equipment., • Load and feed machinery with specified raw materials and parts., • Perform basic repairs and maintenance as needed during production hours and coordinates with Maintenance Mechanic to perform advanced troubleshooting and preventive maintenance., • Refer to work order package and procedural instructions for each assignment before commencing work., • Assure all work assigned is performed in accordance with specifications, instructions, and requirements., • Assist in the performance of a variety of manual labor related to production including but not limited to handling, repeated handling, push, pull, lift, assembly, loading and unloading, packing, and palletization of goods., • Perform assignments in accordance with established safety policies and procedures., • Perform any specified quality assurance checks designated for each assignment adhering to quality policies., • Record specified production information thoroughly and accurately in work order package., • Meet production standards within a reasonable time depending on the degree of difficulty of the designated assignment., • Provide guidance to other individuals on the line, of next steps in the operating line as needed. WHAT YOU NEED TO SUCCEED (Qualifications): • High School Diploma or GED equivalent desired, • Bilingual (English & Spanish), • 1+ years’ experience in a manufacturing environment, • Ability to read and understand product specifications, • Forklift experience., • Ability to lift 50-75 lbs., • Ability to perform basic mathematical operations., • Ability to bend, reach, kneel, and stand for extended period of time., • Mechanically inclined. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: We strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is our policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We are currently seeking an Automobile Technician to become an integral part of our team! You will diagnose, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Inspect and test new vehicles for necessary adjustments Qualifications: • Previous experience as an automotive technician, mechanic, or other related fields - 5 years minimum, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241243

Job Description Job Summary: We are seeking a skilled and reliable Automotive Technician / Mechanic to diagnose, repair, and maintain a variety of vehicles. The ideal candidate is passionate about automotive technology, has strong problem-solving skills. This role involves hands-on work with cars and trucks, ensuring high standards of safety and efficiency. Key Responsibilities: -Perform routine maintenance services such as oil changes, tire rotations, brake inspections, and fluid checks.•Diagnose mechanical and electrical issues using diagnostic tools and equipment. -Repair or replace faulty parts, including engines, transmissions, suspensions, and exhaust systems. -Conduct vehicle inspections and provide accurate estimates for repairs. -Test drive vehicles to verify repairs and ensure quality control. -Maintain a clean and organized workspace, adhering to safety protocols and shop standards. -Communicate effectively with team members about repair needs and progress. -Stay updated on the latest automotive technologies and industry best practices through training. Qualifications and Requirements: • Proven experience as an Automotive Technician or Mechanic (2+ years preferred)., • ASE certification or equivalent (e.g., in brakes, suspension, electrical systems) is a plus., • Strong knowledge of automotive systems, tools, and diagnostic equipment., • Ability to read and interpret technical manuals and schematics., • Excellent troubleshooting and mechanical skills., • Valid driver's license with a clean driving record., • Physical ability to lift heavy objects (up to 50 lbs) and work in various positions., • High school diploma or GED; technical school training is advantageous., • Automatic & Standard Transmission experience is a plus.

Job DescriptionBenefits: • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off, • Training & development, • Vision insurance Benefits Include • Competitive Compensation:, • Career Advancement:, • Training and Development:, • Comprehensive Benefits Package:, • Employee Discounts:, • Positive Work Environment:, • Locally-Owned:, • Cutting-Edge Tools and Equipment:, • Work-Life BalanceResponsibilities: Perform basic automotive maintenance tasks, such as oil changes, tire rotations, and filter replacements, to meet Meineke's high-quality standards. • Assist experienced technicians in diagnosing and troubleshooting mechanical and electrical issues in vehicles., • Follow Meineke's standard operating procedures and safety guidelines while handling tools, equipment, and vehicle systems., • Conduct routine inspections and assist in basic repairs on brakes, suspension systems, exhaust systems, and other automotive components., • Maintain accurate records of services performed, including parts used, labor hours, and vehicle conditions, ensuring compliance with Meineke's documentation standards., • Collaborate with senior technicians and service advisors to effectively communicate vehicle issues, repair recommendations, and estimated costs to customers., • Uphold Meineke's commitment to customer satisfaction by providing excellent service and addressing customer concerns professionally., • Continuously update your knowledge and skills through training sessions, workshops, and Meineke's resources to stay up-to-date with automotive industry trends and advancements.Requirements:, • High school diploma or equivalent., • Previous experience or technical training in automotive repair is preferred., • Basic understanding of automotive systems and components., • Familiarity with diagnostic equipment used in automotive repair., • Ability to follow instructions, work effectively in a team environment, and uphold Meineke's commitment to high-quality work., • Strong attention to detail and problem-solving skills., • Excellent communication and customer service skills to ensure customer satisfaction., • Physical stamina and dexterity to perform manual tasks and lift heavy objects (up to 50 pounds).Why Meineke?, • Frustrated working flat rate doing warranty work. Frustrated just being a number at work come and join our team and become part of our family. Looking for a full time mechanic for a busy shop! We are a full service shop and do anything from oil changes and tires to engines and transmissions. Looking for technicians with A or B skill level experience. We are looking for a hard worker who will show up on time and get the job done right! If you are ready to take your career to the next level and want to earn good money along the way. APPLY NOW! Pay is based on your experience and knowledge. • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job DescriptionWe are seeking Shop Foreman to join our team! You will manage and maintain our machine a repair shop. Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Our client, a dairy and cheese manufacturing company in Perth Amboy, NJ, is looking for a Manufacturing Mechanic Supervisor to oversee a team of production mechanics, who perform preventive maintenance and repair on Manufacturing and Packaging line equipment. Bilingual Spanish required. Salary starts $40/hour, commensurate with experience. Shift time 10p-7a Sunday-Thursday, with the expectation that you will work most Fridays at time and a half rate (potential 48 hour work week). Job Responsibilities: • Supervise team of mechanics who: Troubleshoot and repair all electronic and automation equipment, sensors, cylinders, motors, conveyer belts, HVAC, plumbing, in a production environment that includes a cold/refrigerated area., • Requisitions tools, equipment, and supplies., • Inspects completed work for conformance to blueprints, specifications, and standards., • Studies maintenance schedules and estimates worker hour requirements for completion of job assignments., • Follows safety regulations. Establishes or adjusts work procedures to meet production schedules. Establishes or adjusts work procedures to meet production schedules., • Maintains time and production records, • Confers with other supervisors to coordinate activities of individual departments. Qualifications: • Bilingual Spanish required, • At least 3 years of hands-on, mechanical experience in the manufacturing industry, preferably in food manufacturing/distribution., • Supervisory experience highly preferred., • Understanding of GMP's, Lock Out Tag Out, OSHA regulations., • Electrical repair and preventative maintenance experience crucial, • Experience with reading blueprints, PLC systems, robotics, Operator Interface Terminal (Panel view), pneumatics, sensors and cylinders highly desired, • Previous experience with dairy and cheese manufacturing equipment highly desired, • Black Seal license a plus

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Packaging Operator is responsible for safely operating the packaging equipment to package in process products in accordance with company standard operating procedures and the packaging order. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the packaging work rooms. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Handle start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Load and unload items into packaging machine and remove rejected packages to be isolated as rejects or re-inspection., • Execute packaging processes in accordance with packaging record/work orders., • Troubleshoot and make appropriate adjustments to machine to maintain packaging specifications., • Responsible for disposal of rejected tablets and packaging components in the designated area., • Responsible to clear any jams that do not require a mechanic, • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: • N/A Requirements Education & Qualification: • High school graduate or GED equivalent and/or 1+ years in bottle, blister, and other assorted tablet packaging, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 8 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be able to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able wear all PPE including safety shoes, lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 2nd shift - 3:15 PM to 11:45 PM Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations. This Job Description has been reviewed with my supervisor. 2nd shift - 3:15 PM to 11:45 PM

Job DescriptionDescription: Summary: Looking for an experienced Electro – mechanic who is eager to learn and grow with Eastern Metal Framing’s fast paced environment. ESSENTIAL DUTIES AND RESPONSIBILITIES · Complete repairs to all machinery, facilities, and utilities per work order request · Prepare and coordinate completion of work orders for regular maintenance and PM of machines, facilities and utilities · Perform all work in a manner consistent with established safety procedures · Perform Preventative maintenance to Electrical / Mechanical functions. · Able to effectively troubleshoot electrical and mechanical failures · Make recommendations for spare parts and notify when items need to be restocked. Requirements: REQUIRMENTS · An in-depth knowledge of electrical, hydraulic, pneumatic, and mechanical processes. · Is familiar with AC-DC-PLC, Motors, Systems. · Ability to read and work from prints, both mechanical, and electrical. · Has the knowledge and skill to use a variety of hand tools and power tools as well as shop tools · Willing to work overtime for emergencies as needed. QUALIFICATIONS · High school diploma or equivalent trade school diploma · 5 years of experience in industrial Maintenance (steel industry preferred)

Job Description Location: 100 W. Main St, Bound Brook, NJ 08805 Job Type: Full Time Company Overview Arrow Sewer and Drain LLC is a locally owned and operated sewer, drain, and plumbing excavation company serving both residential and commercial customers. We specialize in diagnosing complex plumbing and sewer issues, performing precision repairs, and providing full excavation and replacement services when necessary. Our mission is to deliver dependable workmanship, transparent communication, and lasting solutions. We believe in professionalism, integrity, teamwork, and continuous improvement. Every employee contributes to our reputation and success. Position Summary: The CDL (Class A) Truck Driver/Heavy Equipment Transporter/Heavy Equipment Transporter is responsible for hauling large plumbing and sewer-related equipment (such as excavators, hydro jetters, vacuum trucks, trenchers, and skid steers) between job sites, our main yard, and vendor locations. The role requires precision, safety awareness, and a strong understanding of DOT regulations. Responsibilities: Job Site Supervision • Load, secure (chains, straps), transport, and unload heavy plumbing/sewer equipment using flatbed and/or lowboy trailers., • Operate company trucks (tractor-trailers, etc.) on local and long-haul routes, ensuring safe and efficient deliveries., • Conduct pre-trip, post-trip, and daily inspections of trucks, trailers, and securement devices; report defects and perform basic preventative maintenance., • Comply with all federal (DOT) and state traffic laws, maintain ELD logs, and uphold a clean driving record., • Complete all required documentation accurately, including trip logs, load summaries, fuel records, inspection reports, and delivery receipts., • Communicate with dispatch and supervisors using phones and GPS systems., • Assist field teams with equipment positioning, delivery timing, and job-site coordination., • Ensure all gas- and diesel-powered tools and equipment are fueled and ready for job-site use, including filling extra fuel cans as needed., • Treat all company vehicles, tools, and assets with care and respect., • Duties and work hours may vary based on operational needs. Qualifications: • Valid CDL Class A license., • Pass Pre-Employment Drug Screening, • At least 5 years of experience hauling heavy equipment., • Strong knowledge of load securement and hauling best practices., • Clean driving record and current DOT medical card., • Ability to occasionally assist with equipment setup or minor site duties., • Proficiency with GPS and navigation systems., • Time management and organizational skills., • Must be able to lift, bend, stand and walk for long periods of time., • Basic mechanic skills. What we offer • Competitive pay and performance bonuses, • Health, dental, and vision insurance, • 401K with matching, • Paid time off and holidays, • Opportunities for advancement and ongoing training

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241222

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus), • Referral Bonus Program Compensation: $18 - $32 / hour Primary Responsibilities: • Job will require IC and Electric truck repairs, • Complete scheduled PM and repair assignments within the time frame allotted, • Track van inventory to meet PM schedule, • Perform routine forklift maintenance, • Use diagnostic tools to test forklift components, • Perform quality inspections Skills Required: • The ability to work in all types of weather conditions, • The ability to stand and walk for long periods of time, • Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job, • Employee must be able to communicate effectively with management, customers, and other employees, • Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks, • Employee must be able to analyze information and write a diagnosis on work orders, • The ability to decipher different colors, • Must be able to work individually and as a team Qualifications: • Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs, • Valid Driver’s license with a good driving record, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Valid Driver’s license with a good driving record, • Ability to lift 50 lbs., • Willingness to learn, • Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Free food & snacks, • Paid time off About Us: We are a rapidly-growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. With our most recent expansion to a new facility, we are seeking a talented Maintenance Mechanic/Technician to secure uninterrupted production processes and provide technical support to the production staff. This position is for the first shift starting at 7.30pm and ending around 5pm. As a company committed to delivering high-quality food products to our customers, we are looking for a dynamic individual who can effectively manage multiple tasks and set correct priorities. Knowledge, skills, tasks, responsibilities: • Ability to familiarize yourself with existing machinery as well as connect/setup new machinery as required, • Fix basic breakages such as walls, leaking pipes, connectors, bearings, lights and other mechanical issues, • Experience with basic Industrial Electricity, able to trace and identify electrical sources and identify voltage. Experienced changing Motor, Contactors, Starters, Relays, and other electrical components frequently used in an industrial environment., • Knowledge and basic understanding of PLCs, VFDs, and Servo Motors., • Experience with Pneumatic and Hydraulic systems, including understanding of basic system components., • Basic Welding Skills, • Basic Plumbing Skills, • Must be able to read Technical Manuals and Mechanical and Electrical Drawings/Schematics., • Proficient in the use of hand and power tools commonly found in typical maintenance shops., • Experience of Safe Work Practices of an Industrial Mechanic. Familiarity of OSHA safety standards and regulations., • Must be able to stand for 8 hours, able to lift heavy objects (50 lbs), use ladders, work in hot or cold conditions., • Must be able to conduct business in a professional manner with internal and external contacts., • Spanish language knowledge is a plus., • Must have a valid Drivers License.

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime., • Participate in regulatory and safety audits related to packaging lines. Level 3 - Mechanic, Maintenance (PKG.) Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (PKG.) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (PKG.) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift 3:00pm to 11:30pm

Job Description An international plant-based food manufacturing company is seeking a Maintenance Mechanic. At least 2 years of experience as a mechanic (food manufacturing preferred but not required) • $25 - 28/hr. Plus full benefits, • Monday, Wednesday – Saturday 07:00 a.m. – 04:00 p.m. (Tuesday and Sunday off) During probation Monday – Friday 08:00 a.m. – 05:00 p.m. (if possible) • Somerset, NJ Requirements of the Maintenance Mechanic: • High school diploma required; technical school preferred, • At least 2 years of manufacturing mechanic experience, • Skills in plumbing, wiring, welding, and drilling, • Able to lift up to 50 lbs, • Strong problem‐solving and multitasking, • Good communication, logic, and attention to detail, • Able to read electrical, pneumatic, hydraulic, and mechanical schematics, • Experience replacing motors, belts, bearings, pulleys, sprockets, chains, cylinders, etc., • Familiar with Microsoft Word, Excel, PowerPoint, Outlook, and Teams Responsibilities of the Maintenance Mechanic: • Follow safety rules; keep work area clean, • Perform preventive maintenance; troubleshoot machinery, • Read and complete work orders, • Improve equipment efficiency, • Supervise, train, and support staff, • Work well with team members and other departments, • Manage parts, inventory, vendors, and contractors, • Maintain and repair facility equipment and systems, • Document maintenance work and track equipment data, • Develop maintenance plans and meet targets, • Wear required PPE, • Participate in committees Employment Type: Direct Hire Schedule: Monday, Wednesday – Saturday 07:00 a.m. – 04:00 p.m. (Tuesday and Sunday off) During probation, Monday – Friday 08:00 a.m. – 05:00 p.m. (if possible) Production maintenance, facility maintenance, preventive maintenance, motors, belts, bearings, pulleys, sprockets, chains, cylinders, troubleshoot machinery Company DescriptionTriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.TriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.

Job Description Position Overview: This position is responsible for ensuring the continuous functionality of all production equipment. Key Responsibilities: • Perform regularly scheduled preventive maintenance on all production equipment and machinery., • Perform emergency repairs on all production equipment and machinery., • Conform to all procedures regarding spare parts usage., • Perform repairs and maintenance according to any and all OSHA and other safety requirements, i.e.: lockout/tagout., • Perform all maintenance and repairs in an accurate, complete and timely manner., • Maintain mechanical availability of all production equipment., • Maintain mechanical availability of all facility equipment. Other Important Responsibilities: • Maintain a daily log of Preventive Maintenance and downtime through Computerized Maintenance Management System, Simplicity CMMS, • Maintain a daily work log and EOD/end of day email report to Upper management., • Assist the Parts Inventory Clerk with proper specs and info when sourcing parts for repairs and regular maintenance., • Work with outside contractors during routine maintenance and emergency repairs., • Timely Corrective Action response and resolution to relevant situations., • As required, will install new equipment, facility upgrades, perform repair work as needed and support production., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 7-10 years (or more) of relevant experience., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • High School Graduate required. Vocational Degree Preferred., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative. Physical requirements and work environment: • Must be able to lift 70 lbs., • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Mechanics must provide all industry required hand tools and tool box. Checklist will be provided. All specialty tools will be provided by CompoSecure. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit www.CompoSecure.com and www.GetArculus.com. We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to recruiting@composecure.com.

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs., • Champion safety and compliance across the facility. Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (MFG) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (MFG) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. 2nd shift 3:00 PM to 11:30 PM

Job DescriptionIndustrial Maintenance Technician — Food Processing Location: Somerset, NJ Compensation: $25–$28 per hour + full benefits Employment Type: Direct Hire Schedule: Mon, Wed–Sat, 7:00 a.m.–4:00 p.m. (Tue and Sun off). During probation: Mon–Fri, 8:00 a.m.–5:00 p.m. (if possible). A day in this role Start your shift with PPE on and a quick safety sweep of your area. You’ll open the maintenance queue, review work orders, and prioritize preventive tasks that keep our plant-based food production lines running smoothly. Before lunch, you might swap a worn conveyor belt, change a motor bearing, and trace a pneumatic line using a schematic. In the afternoon, you could diagnose an HVAC fault affecting a room’s temperature, coach a teammate on lockout procedures, and document completed work so trends are tracked and future downtime is reduced. Throughout the day, you’ll collaborate with production, coordinate vendors for parts, and look for ways to boost equipment efficiency. What you will do • Own safety: follow all rules, wear required PPE, and keep the workspace clean., • Execute preventive maintenance and troubleshoot mechanical, electrical, pneumatic, and hydraulic systems., • Read and close out work orders with clear documentation and equipment data tracking., • Improve uptime and efficiency through root-cause fixes and continuous improvement ideas., • Support and occasionally supervise or train staff to elevate team capability., • Partner across departments; coordinate parts, inventory, vendors, and contractors., • Maintain and repair facility utilities and production equipment., • Develop maintenance plans and hit performance targets., • Participate in committees that drive safety and reliability.What you bring, • High school diploma required; technical school preferred., • 2+ years of experience as a manufacturing mechanic; food manufacturing preferred but not required., • Hands-on ability in plumbing, wiring, welding, and drilling., • Comfort reading electrical, pneumatic, hydraulic, and mechanical schematics., • Experience replacing motors, belts, bearings, pulleys, sprockets, chains, and cylinders., • Strong problem solving, multitasking, communication, logic, and attention to detail., • Able to lift up to 50 lbs., • Comfortable with Microsoft Word, Excel, PowerPoint, Outlook, and Teams.You’re proficient in, • Plumbing, • Preventive Maintenance & Inspection, • Electrical Installation and Electrical Repair, • HVAC Maintenance, Troubleshooting, and Repair, • Welding setups for production, • General maintenance and repair, • Mechanical systems and component repair, • Equipment installation & wiring, • Equipment repair & maintenance, • Machine safety inspectionsMachines and technologies you’ll use, • HVAC systems, • Conveyor systems Keywords: Production maintenance, facility maintenance, preventive maintenance, motors, belts, bearings, pulleys, sprockets, chains, cylinders, troubleshoot machinery.

Job DescriptionAbout Us: We are a rapidly-growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes. With our most recent expansion to a new facility, we are seeking a talented Maintenance Mechanic/Technician to secure uninterrupted production processes and provide technical support to the production staff. This position is for the first shift starting at 7.30pm and ending around 5pm. As a company committed to delivering high-quality food products to our customers, we are looking for a dynamic individual who can effectively manage multiple tasks and set correct priorities. Knowledge, skills, tasks, responsibilities: • Ability to familiarize yourself with existing machinery as well as connect/setup new machinery as required, • Fix basic breakages such as walls, leaking pipes, connectors, bearings, lights and other mechanical issues, • Experience with basic Industrial Electricity, able to trace and identify electrical sources and identify voltage. Experienced changing Motor, Contactors, Starters, Relays, and other electrical components frequently used in an industrial environment., • Knowledge and basic understanding of PLC’s, VFD’s, and Servo Motors., • Experience with Pneumatic and Hydraulic systems, including understanding of basic system components., • Basic Welding Skills, • Basic Plumbing Skills, • Must be able to read Technical Manuals and Mechanical and Electrical Drawings/Schematics., • Proficient in the use of hand and power tools commonly found in typical maintenance shops., • Experience of Safe Work Practices of an Industrial Mechanic. Familiarity of OSHA safety standards and regulations., • Must be able to stand for 8 hours, able to lift heavy objects (50 lbs), use ladders, work in hot or cold conditions., • Must be able to conduct business in a professional manner with internal and external contacts., • Spanish language knowledge is a plus., • Must have a valid Driver’s License.

Job Description Tri-Lift NJ has openings for entry level road mechanics. This is a great position for enthusiastic, motivated individuals interested in starting a career as a mechanic. The ideal candidate will have a familiarity with basic engine maintenance and a solid mechanical aptitude. A clean driving record is a must as you will drive a company van. You must possess your own tools. This is an opportunity for you to work alongside senior level technicians and start the path to becoming a full fledged Technician. The right attitude and a desire to succeed will create a bright future with our growing company. Responsibilities: • Complete planned maintenance work on equipment at customer locations, • Perform routine preventive maintenance, • Perform PM's in a timely fashion Qualifications: • Previous experience in maintenance or other related fields, • Familiarity with maintenance tools and equipment, • Ability to handle physical workload, • Deadline and detail-oriented

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • Ability to follow instructions and work as part of a team. Level 2 – Mechanic, Building Maintenance • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • Knowledge of building codes and safety regulations. Level 3 – Mechanic, Building Maintenance • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00pm to 11:30 pm

Job DescriptionDescription: Falcon Manufacturing is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add Industrial Maintenance Mechanic to our Team. Job Description: Maintain production and quality for precision sheet metal fabricator facility by ensuring operation of machinery and mechanical equipment. This requires working with others in the company including department supervisors and purchasing. Requirements: Responsibilities: • Preventive maintenance of machinery and mechanical equipment: press brakes, spot welders, lasers, NC turret presses, and production machines following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications, • Troubleshoot and repair mechanical, electrical, hydraulic, and pneumatic equipment as needed., • Repair or replace broken or malfunctioning components, • Disassemble machinery and equipment when there is a problem, • Test malfunctioning machinery to determine whether major repairs are needed, • Detect minor problems by performing basic diagnostic tests, • Clean and lubricate equipment or machinery, • Perform inspections, preventative maintenance and repairs on building including HVAC, plumbing, and electrical systems What it Takes to Succeed: • High School Diploma or Equivalent, • Minimum 3 years of experience, • Technical understanding required, • Knowledge of equipment, ability to read blueprints and technical schematics, • Knowledge to fix minor electrical issues, plumbing and HVAC systems, • Ability to work independently and in a team environment, • Ability to solve a problem, • Ability to thrive in an evolving, fast-paced, deadline-driven environment, • Ability to lift, push, or pull up to 25 lbs., occasionally up to 50 pounds and more, • Dependable, • Energetic and eager to learn Bonus Point: · Experience in metal shop production · Basic computer knowledge Location: Somerset, NJ Job Type: Full time, 1st shift Monday to Friday, from 6:00am to 2:30pm Overtime as needed Pay: hourly from $20.00 to $30.00 DOE Benefits: · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D, Short-term and Long-term Disability Insurances · Various Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · 401(k) with Company Match · Paid Time off and Sick Time (90 days waiting period) · 9 Paid Holidays (90 days waiting period)

Job Description Maintenance Assistant (Hotel) Location:Hampton Inn by Hilton - 205 New World Way, South Plainfield, NJ 0708 The Hampton Inn - South Plainfield is seeking a Maintenance Assistant to join their team! This is a Full Time position - shift 8am to 4pm. Flexible availability is needed. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by Buffalo Lodging and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations., • Cleans internal areas of buildings including sweeping, mopping and removing garbage from building. Maintains cleanliness of public and storage areas as well as the parking lot. Typical shifts would be: Any day of the week, including weekends ; What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Flexible Spending Account, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • Long-Term Disability Insurance, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities, • Employee Referral Program, • Typical Shifts -Schedule is based on business needs; Schedule is normally Tuesday - Saturday hours are typically from 9am-5pm. Weekend/Holiday availability is a required. Buffalo Lodging Associates provides equal employment opportunities to all associates and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

We are a rapidly-growing food manufacturer specializing in ready-to-eat meals, salads, and side dishes.With our most recent expansion to a new facility, we are seeking a talented Maintenance.This position is for the first shift starting at 7.As a company committed to delivering high-quality food pro

Job Description We are looking for a Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and transmission systems. Responsibilities: • Repair trucks,, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the driver Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany Descriptionfamily owned and operated fast growing trucking and construction companyfamily owned and operated fast growing trucking and construction company

Job DescriptionSalary: $30-35 per hour (based on experience) Woods Machinery is seeking an experienced Outdoor Power Equipment Mechanic to join our dynamic team. In this role, you will play a vital part in ensuring the optimal performance and reliability of the outdoor power equipment brands we represent and support. The ideal candidate will have strong mechanical aptitude, experience working with small engines, hydraulic systems, and electrical components, along with a commitment to safety and high-quality workmanship. Key Responsibilities: • Diagnose and repair mechanical, electrical, and hydraulic issues on outdoor power equipment including, but not limited to: commercial mowers, stand-on and walk-behind units, compact tractors, utility vehicles, blowers, chainsaws, and other landscape equipment., • Perform routine maintenance tasks including oil changes, filter replacements, blade sharpening, belt replacement, and equipment inspections., • Conduct thorough equipment inspections to identify potential issues and prevent breakdowns., • Interpret technical manuals and schematics to troubleshoot and repair equipment efficiently., • Document all maintenance and repair activities accurately and maintain detailed service records., • Consistently achieve and adhere to the allocated flat-rate or estimated hours for each repair task., • Maintain a clean and organized work area while adhering to safety protocols., • Assist with equipment setup and pre-delivery inspections as needed., • Perform other duties and special projects as assigned. Benefits: • Hourly pay + overtime opportunities, • Health, vision & dental insurance, • Tool reimbursement program, • Paid time-off (vacation and personal days), • 401K Retirement Plan with company matching, • Company supplied uniforms, • Manufacturer sponsored training (in-person and online), • Career advancement opportunities, • Company outings and monthly lunch, • Employee discounts on products sold by the company, • Employee referral bonus Requirements: • Demonstrated experience as an Outdoor Power Equipment Mechanic or Small Engine Mechanic., • Strong diagnostic and troubleshooting skills with gasoline engines, electrical systems, and hydraulic components., • Experience servicing commercial landscaping equipment such as mowers, blowers, chainsaws, and compact utility equipment., • Proficient with computers and interpreting technical manuals and schematics., • Ability to work independently and as part of a team., • Strong commitment to safety and adherence to industry standards., • Excellent communication and organizational skills., • Technical training or certifications related to small engines, electrical systems, and equipment repair are preferred., • Must possess standard tools required for equipment repairs., • Attention to detail, organizational skills, and the ability to work in a fast-paced environment., • Ability to work both indoors and outdoors in varying weather conditions including heat, cold, rain, dust, and noise., • Willingness to work overtime when business demands require. About Us: Woods Machinery is a second-generation family owned business providing equipment sales, rentals, and product support since 1984. We are an industry leading company dedicated to providing exceptional products and support to our customers. We take pride in our commitment to quality, customer satisfaction, and collaborative team environment. Please visit www.woodsmachinery.com to learn more about us, our products, and services.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241244

Job Description Hampton Inn by Hilton, South Plainfield-Piscataway-205 New World Way, South Plainfield, NJ 07080 We are currently looking for Chief Engineer to join our Team! Our Hampton Inn with 107 guest rooms, is located off I-287/I-95 in South Plainfield, a half-mile from Hadley Center and 10 minutes from Piscataway. Rutgers University – New Brunswick is six miles away and we’re close to a variety of corporate offices. The New Jersey Convention and Exposition Center is nine miles away and we’re 30 minutes from Newark Airport. We serve a daily hot complimentary to all our guests. A great place to stay – a great place to work. The Hampton Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties, • Career growth opportunities Role: The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • Supervisory duties of the Maintenance Assistant on site including interviewing, hiring, training, appraising performance, rewarding and disciplining; planning, assigning, directing work, addressing complaints and resolving problems. What You Bring: • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required, • Must have valid drivers license, and acceptable driving history subject to company approval. Buffalo Lodging provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241215

Job Description Job Title: Maintenance Mechanic Hourly pay rate $34.15 - $43.40 per hour The hours are a rotating schedule, Mon - Sat, 1st Shift, 7AM-3PM, 2nd Shift, 3PM-11PM, 3rd Shift, 11PM-7AM. Weekly rotation, some overtime on weekends when needed. Role & Responsibilities: · Compliance with all safety and housekeeping rules. · Perform troubleshooting, repairs, and preventive maintenance activities necessary to keep industrial equipment operating efficiently. Tasks may include but are not limited to motors, pneumatic tools, hydraulic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications; and troubleshooting malfunctions. · Become familiar with plant work order system. · Proficiency in using hand and power tools, cranes/hoist, rigging equipment, welders, fall restraint, etc. · Work as part of a team, communicating and cooperating to achieve the required results. · Expected to take an active role in all plant safety and continuous improvement initiatives as required by supervision. · Adaptable to scheduling requirements including shiftwork, assignment of overtime, working weekends, etc. where applicable. Qualifications & Requirements: · Ability to perform assigned repair and servicing tasks. · Willingness to work the assigned schedule. · Consistently demonstrate an understanding of all plant & departmental safety rules, standards, and programs. · Meet the essential physical requirements of the position. · Be able to work at heights. · Able to use various forms of mobile equipment such as Forklifts, Manlifts, Genie LIfts, etc. · Maintain regular and predictable attendance. · Have ability to understand verbal and written instructions from plant supervision and efficiently and effectively perform assigned tasks. · Responsible for maintaining a set of personal tools as specified in the operator rate program. Additional Information: · Shift: Rotating · Department: Engineering Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values – innovation, quality, integrity, service, diversity, efficiency and safety – have helped us become the company we are today. EOE including disability/veteran

Job DescriptionDiesel Technician / Mechanic Location: Raritan, NJ Are you ready to take your diesel mechanic career to the next level? Join Campbell Supply, the largest Freightliner dealership in the Tri-State Area, where your skills are valued, and your career growth is supported! About Us: Campbell Supply is a family-owned dealership with a legacy dating back to 1967. With seven locations, we are a cornerstone in the commercial and emergency vehicle industries, providing exceptional service, quality products, and tailored solutions. Campbell Supply offers a range of commercial and emergency product lines, including Freightliner, Western Star, Isuzu, Spartan, and KME Emergency Vehicles. At Campbell Supply, you'll gain access to Freightliner OEM Training, hands-on mentorship, and opportunities to grow into leadership roles within our seven-location network. Join a family-owned business where teamwork, respect, and innovation are at the heart of everything we do. Diesel Technician Duties: Diagnose, document, and repair engine, transmission, and major component fault codes using company-supplied laptops and OEM software while following proper warranty procedures. Perform troubleshooting, service, and repair on all components as well as preventative maintenance and reconditioning. Demonstrate well-developed technical and troubleshooting skills with effective problem-solving abilities. Attend OEM and dealer training online as well as in-person when required. Requirements: 3+ years of experience as a diesel mechanic, fleet mechanic, or heavy equipment mechanic. Formal training in diagnosing, repairing, and maintaining Class 3-7 vehicles is preferred but not required. Excellent communication skills with the ability to effectively communicate with co-workers and drivers, demonstrating teamwork skills. Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. Participation in Continuous Improvement Initiatives and the DTNA Elite Support Program. Shifts Available: Monday-Friday 8A-4:30P Overtime opportunities available Benefits: Competitive compensation: $40,000 – $100,000 annually Monthly Bonus Opportunities and Referral Program Paid Vacation and Holidays Comprehensive medical, vision, and dental insurance 401(k) with a company-provided match after the 1st year Employee discounts with preferred vendors Company-provided uniform and laundry service Career Advancement Opportunities with factory-provided intensive in-person and online training programs Monday- Friday 8:00-4:30

Job Description Join the H&S Family of Bakeries – the team behind H&S Family of Bakeries includes Northeast Foods, H&S Bakery and Schmidt Baking Co. – the largest family-owned variety baker in the United States. Headquartered in Baltimore, Maryland, we operate a network of 10 bakeries and 30 distribution centers across the country to deliver fresh, high-quality baked goods nationwide, from fast food and quick-service restaurants to cafeterias, hospitals, grocery stores and universities to name a few. We’re passionate about innovation in manufacturing and distribution, leading the way in the industrial baking industry, while creating opportunities for our people to grow and succeed. Our Core Beliefs: Be Well, Work Well | Create an Experience | Life-long Learning | Do the Right Thing The Maintenance Mechanic 2nd Class plays a pivotal role in supporting operations by maintaining equipment, troubleshooting when problems arise, and repairing machines when broken down. They will perform troubleshooting and repairs for all facets of modern automated equipment. This is a position where a candidate can continue to improve their skills and grow into more advanced roles. In this role, you will: • Answer trouble calls to production equipment., • Perform preventative maintenance routines with precision. Complete assigned work request repairs promptly., • Keep our shop and equipment in tiptop shape, clean and safe., • Conduct test runs on all equipment post repairs or preventative maintenance. Accomplish all related forms and paperwork after the end of the shift Maintain a minimum tool list and carry tools to calls, • Practice and uphold all company policies and procedures, fostering a culture of safety and compliance. Qualifications: • Prior experience in plant maintenance or general commercial mechanic experience. Arrival to work on time consistently., • Work in a fast-paced environment and must also adapt to frequent changes that occur on the production line., • Must possess/maintain a valid license to operate applicable equipment. Read, comprehend and practice necessary safety procedures, signs, etc., • Willing to work irregular and/or rotating shifts, including split days off (non-consecutive days off) and working holidays and weekends as required., • Must be 18 years or older. Essential Physical Requirements: • Ability to lift and carry up to 50 pounds, and push and pull heavy wheeled equipment or carts in a fast-paced manufacturing environment, with or without reasonable accommodation., • Ability to stand and/or walk for extended periods of time during a shift, maintaining a normal range of motion in all extremities., • Ability to reach, bend, stoop, and crouch to access equipment, tools, or materials. Ability to use arms, hands and fingers to handle or operate machinery, tools or controls. Ability to perceive and respond immediately to visual and audible safety alerts and warnings to ensure the safety of self and others in a fast-paced, hazard-sensitive environment with or without reasonable accommodation., • Ability to work in environments with varying temperatures, noise levels, and airborne particles, odors and fumes., • Ability to climb stairs, ladders, or work platforms as required by the position. Ability to sit for prolonged periods using office equipment and computer systems., • Ability to wear required personal protective equipment (PPE) and protective clothing for extended periods of time, with or without reasonable accommodation. What’s in it for you? At H&S Family of Bakeries, we value our team members and work hard to create a workplace where people can grow and thrive. Along with equitable pay, we provide exceptional benefits designed to support you both at work and in life. Our comprehensive and affordable packages include medical, dental, and vision coverage; short-term disability; retirement savings; paid time off; flexible spending accounts; an employee assistance program; and, of course, some very cool company swag. Equal Opportunity Employer: H&S Family of Bakeries is proud to be an Equal Opportunity Employer. We welcome diversity and are committed to creating an inclusive environment for all team members. We consider all qualified applicants without regard to race, color, religion, sex, national origin, political affiliation, sexual orientation, gender identity, marital status, disability, genetic information, age, membership in an employee organization, or any other factor unrelated to merit. Offer Determination Guidelines: The salary range listed for this position is provided in accordance with applicable transparency laws and serves as a general guideline. However, it does not represent a guaranteed salary offer. Actual compensation will be determined based on a variety of job-related factors, which may include but are not limited to relevant experience, skills, education, internal equity, market data, and geographic location, including local cost of living. The final offer may vary outside the posted range based on these considerations. #ZR

Job Description Diesel Bus Mechanic Shop URGENTLY Hiring! APPLY TODAY & A Recruiter Will Reach Out ASAP! Can Start As Soon As This Week. 2nd Shift – 2:30pm-11pm with OT to be expected most weeks. Large Bus company with great training and room for growth. $23-$26/hr depending on experience. Job Description: • Responsible for diagnosing problems and performing standard mechanical repairs in a shop environment on customer equipment and all related components (steering, brakes, suspension components, engine components and subassemblies) primarily on diesel buses, • Works from shop orders, specifications, manuals, prints and instructions, • Performs DOT Inspections., • Diagnoses and repairs a variety of systems and related components, including, but not limited to: steering systems, braking systems, suspensions, charging and cranking systems, drive trains and a range of electrical, pneumatic, hydraulic systems and Motor Vehicle Air Conditioning (MVAC) systems., • Completely required documentation. Requirements: -Must have H.S. diploma or equivalent -Must have at least 2+ Years of prior hands-on auto/diesel mechanical experience -Technical School Auto/Diesel Certification Preferred APPLY NOW! Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Jun 5, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Overview Trailer Technician / Mechanic Location: Perth Amboy, NJ Company: Amerit Fleet Solutions Amerit Fleet Solutions, one of the nation’s leading fleet maintenance providers, is seeking a skilled Trailer Technician/Mechanic to join our team in Perth Amboy, NJ. In this role, you’ll be responsible for maintaining and repairing Class 7–8 trailers, ensuring safety, reliability, and uptime for our fleet operations. Pay & Schedule • $30.00 – $35.00/hour (based on experience), • Paid weekly (every Friday), • Sign-on bonus up to $2,500, • Schedule: Monday – Friday | 8:00 AM – 5:00 PMWhy Join Amerit Fleet Solutions?, • Full benefits within 30 days of hire, • Medical, dental, vision, prescription coverage, • Company-paid life & disability insurance, • 401(k) with company match, • Paid vacation, holidays & sick time, • Boot & prescription safety glasses reimbursement, • Ongoing training through Amerit University, • ASE certification reimbursement + bonus, • Employee referral bonus (up to $500), • Employee recognition & rewards program, • Employee Assistance Program (EAP) + 24/7 nurse triage line, • Discounts on cell phone plans & entertainment, • Wellness programs & employee resource groupsKey Responsibilities, • Perform diagnostics, repairs, and preventative maintenance on Class 7–8 trailers, • Conduct DOT inspections and safety checks, • Inspect, repair, and maintain undercarriage and trailer components, • Accurately complete service documentation (manual & digital), • Safely operate vehicles to test performance, • Move, install, and remove parts as needed, • Follow all DOT regulations, safety standards, and company policies, • Maintain a clean and organized work environmentQualifications, • Minimum 2+ years of trailer or heavy-duty vehicle maintenance experience, • Experience with DOT inspections, • Ability to operate manual transmission vehicles, • Must provide own tools, • Basic computer skills for work orders and documentation, • Strong communication and teamwork skills Working Conditions: • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions. Are you ready to advance your career as a Trailer Technician with Amerit Fleet Solutions? Apply Today! https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #TrailerMechanic #NowHiring #TrailerTechnicianCareer #MechanicJobs #TrailerTechnician INDBD

Job Description We are looking for an Auto Mechanic to join our team! You will be responsible for repairing various vehicles and transmission systems. Responsibilities: • Repair vehicles, • Specialize in vehicle transmission systems, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the customer Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionMarvel Medical Transport is a for-profit company serving the assisted transportation needs throughout Monmouth County and prescheduled appointments beyond. Founded by a hardworking husband and wife team, Marvel provides assisted ambulatory and wheelchair transportation to area seniors and those with mobility challenges. Well experienced in logistics, Richard drove trucks throughout the tri-state area for several years. However, it wasn't until he started servicing a VA Medical Center that he witnessed firsthand the need for more reliable and timely assisted transportation solutions. With Stephanie's experience of more than 10 years in the medical industry and an associate degree in Applied Science, the two realized the great opportunity for offering a more timely and reliable solution. Unlike other services operating as a curb-to-curb service, Marvel is committed to safely escorting you or your loved one from residence or facility to a clean, comfortable, and modern wheelchair accessible vehicle. On arrival at your destination, trained staff will escort you to check-in. In leveraging years of professional training and experience in the logistics and medical industries, Marvel continues to build and cultivate strategic relationships with area staff, patients, and families. Rather than focusing exclusively on volume and profits, Marvel is keenly focused on providing exceptional and timely customer service with the compassion you and your loved ones deserve.Marvel Medical Transport is a for-profit company serving the assisted transportation needs throughout Monmouth County and prescheduled appointments beyond. \r\n\r\nFounded by a hardworking husband and wife team, Marvel provides assisted ambulatory and wheelchair transportation to area seniors and those with mobility challenges.\r\n\r\nWell experienced in logistics, Richard drove trucks throughout the tri-state area for several years. However, it wasn't until he started servicing a VA Medical Center that he witnessed firsthand the need for more reliable and timely assisted transportation solutions. With Stephanie's experience of more than 10 years in the medical industry and an associate degree in Applied Science, the two realized the great opportunity for offering a more timely and reliable solution. \r\n\r\nUnlike other services operating as a curb-to-curb service, Marvel is committed to safely escorting you or your loved one from residence or facility to a clean, comfortable, and modern wheelchair accessible vehicle. On arrival at your destination, trained staff will escort you to check-in. \r\n\r\nIn leveraging years of professional training and experience in the logistics and medical industries, Marvel continues to build and cultivate strategic relationships with area staff, patients, and families. Rather than focusing exclusively on volume and profits, Marvel is keenly focused on providing exceptional and timely customer service with the compassion you and your loved ones deserve.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Green Brook Township, NJ area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Berendsen Territory Sales Representative – Fluid Power Components, Systems & Controls (PA/NJ) Berendsen is one of North America’s leading value-added distributors, providing custom-designed hydraulic, pneumatic, electrical and electronic solutions to Mobile and Industrial OEMs and End Users. We are seeking a high-energy Territory Sales Representative to manage and grow our presence across Eastern Pennsylvania and New Jersey. This is a "roll-up-your-sleeves" technical sales role focusing on providing total fluid power solutions—ranging from complex systems and power units to everyday hose and fitting components—to a diverse mix of small-to-mid-sized OEMs and large industrial end-users. The Territory • Coverage: Eastern Pennsylvania (Philadelphia/Lehigh Valley/Scranton) and all of New Jersey., • Key Markets: Mobile and Industrial equipment OEMs, industrial manufacturing, and heavy infrastructure. Your Day-to-Day • Needs-Driven Consulting: Uncover customer pain points and business priorities to deliver customized, value-added solutions., • Technical Problem Solving: Work directly with maintenance managers and engineers to spec out pumps, valves, cylinders, and hose assemblies., • Technical Literacy: Read and interpret hydraulic schematics to troubleshoot existing systems and identify where our components can improve performance or reliability., • Integrated Solutions: Leverage a general knowledge of electrical and control design to help customers integrate fluid power systems with PLC-driven environments and electronic controls., • Strategic Selling: Utilize a structured strategic selling methodology to manage complex, multi-stakeholder sales processes and create "win-win" partnerships., • Territory Management: Develop and execute a localized sales strategy to maximize growth and achieve quotas within your assigned region. Why You’ll Succeed (Our Commitment to You) We believe in empowerment through support. We provide a robust technical backup team—including dedicated inside sales, application engineering, and product support—specifically designed to handle the administrative and deep-technical heavy lifting. This structure ensures you can spend 80% of your time in front of customers, doing what you do best: building relationships and closing deals. What You Need to Bring • Value-Based Sales Approach: Proven ability to build value in the eyes of prospects by positioning products as solutions to specific business challenges., • Team Collaboration: A collaborative mindset, working closely with our internal engineering and support teams to deliver a seamless customer experience., • Technical Proficiency: Demonstrated ability to read and understand hydraulic schematics and a working knowledge of electrical control circuits., • Time & Territory Management: Strong skills in planning your time and administrative tasks effectively to maintain a consistent presence across a large geographic area., • Educational Background: A Mechanical Engineering degree is a strong plus, as is an IFPS Certification (Hydraulic Specialist or Mechanic)., • Travel Readiness: Ability to travel daily within the territory to visit customer sites. What We Offer You: • Competitive base salary, incentive programs, car allowance, company-provided laptop and cell phone, • Comprehensive benefits package, including both a PPO and High-Deductible plan (with company matching HSA), • Unlimited flexible vacation plan, holidays and floating holidays, • Disability and Life Insurance, • Company matching 401(k) (50% up to 8%), • Tailored training and development programs

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241214

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241238

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job Description Diesel Mechanic Job Description We are looking for a skilled Diesel Mechanic to join our team at Pinto Brothers Disposal. As a Diesel Mechanic, you will be responsible for performing maintenance and repairs on our fleet of diesel-powered vehicles, including garbage trucks and other heavy equipment. Perform inspection, diagnosis, preventative maintenance, repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment this includes diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Responsibilities: • · Diagnose and repair mechanical, electrical, and hydraulic systems on diesel-powered vehicles and equipment., • · Perform routine maintenance, including oil changes, tire rotations, and brake inspections., • · Use diagnostic tools and software to identify and troubleshoot problems., • · Communicate with the operations team to ensure vehicles are serviced and maintained according to schedule., • · Maintain accurate records of work performed and parts used., • · Keep a clean and safe work area. Requirements: • · Applicants must be at least 18 years of age and legally eligible to work in the United States., • · A valid driver’s license is required. CDL plus not required, • · Experience working on heavy duty diesel equipment OR training from a recognized trade school is required., • · Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • · Must be able to meet the physical and safety requirements of the position., • · Must be able to provide own tools, • · 2+ year’s experience working as a heavy duty Diesel Mechanic, • · Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • · Working knowledge of applicable DOT and OSHA standards and regulations., • · Strong knowledge of diesel engine repair and maintenance., • · Must be able to lift up to 50 pounds and perform physical labor. Frequent squatting and standing is required. If you are a skilled Diesel Mechanic who is looking for a challenging and rewarding opportunity, we encourage you to apply for this position. We offer competitive pay, benefits, and a supportive work environment. To apply, please submit your resume and a cover letter outlining your experience and qualifications. Pinto Brothers Disposal Company DescriptionPinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.

Job Description Diesel Mechanic Sayreville, NJ Job Type: Full-time Pay: Competitive salary (based on experience) Job Description: A reputable construction company based in Sayreville, NJ is looking for an experienced Diesel Mechanic to join our team. This role involves maintaining and repairing diesel-powered equipment to ensure safe and efficient operation across our job sites. Responsibilities: • Inspect, diagnose, and repair diesel engines and heavy construction equipment, • Perform routine maintenance and preventative service, • Troubleshoot mechanical, hydraulic, and electrical issues, • Maintain accurate service records, • Ensure equipment meets safety and operational standards Qualifications: • Minimum 3+ years of diesel mechanic experience (construction equipment preferred), • Strong knowledge of diesel engines, hydraulics, and electrical systems, • Ability to work independently and efficiently, • Valid driver’s license (CDL is a plus), • Own tools preferred Benefits: • Competitive pay based on experience, • Overtime opportunities, • Stable, year-round work, • Opportunity for growth within the company Schedule: • Monday to Friday, • Overtime available Work Location: In person – Sayreville, NJ How to Apply: Submit your resume and a brief summary of your experience. Qualified candidates will be contacted for an interview.

Job DescriptionSalary: $40-$45/hour Woods Machinery is seeking an experienced Heavy Equipment Mechanic to join our dynamic team. As a Heavy Equipment Mechanic, you will play a vital role in ensuring the optimal performance and reliability of the machinery brands we represent and support. The ideal candidate will have a strong mechanical aptitude, extensive knowledge of heavy equipment diesel, hydraulic and electrical systems, and a commitment to safety and quality workmanship. Key Responsibilities: • Diagnose and repair mechanical, electrical, and hydraulic issues in all equipment supported by the company including but not limited to: Track Loaders, Excavators, Wheel Loaders, Chippers, Stump Grinders, Hydroseeders and Commercial Mowers., • Perform routine maintenance tasks, including oil changes, filter replacements, and inspections., • Conduct thorough equipment inspections to identify potential issues and prevent breakdowns., • Interpret technical manuals and schematics to troubleshoot and repair equipment., • Document all maintenance and repair activities accurately and maintain detailed records., • Consistently achieve and adhere to the allocated flat rate or estimated hours for each repair task., • Adhere to safety protocols and ensure a safe working environment., • Other duties and special projects as assigned. Benefits: • Hourly pay + overtime opportunities, • Quarterly bonus opportunities, • Health, vision & dental insurance, • Tool reimbursement program, • Paid time-off (vacation and personal days), • 401K Retirement Plan with company matching, • Company supplied uniforms, • Manufacturer sponsored training (in-person and on-line), • Career advancement opportunities, • Company outings and monthly lunch, • Discounts offered on products sold by the company, • Referral bonus Requirements: • Demonstrated expertise as a Heavy Equipment Mechanic, with a proven track record in diesel, hydraulic/hydrostatic, fuel and electrical repair skills., • Strong diagnostic and troubleshooting skills., • Proficient with computers and interpreting schematics and technical manuals., • Ability to work independently and as part of a team., • Strong commitment to safety and adherence to industry regulations., • Excellent communication and organizational skills., • Certificates from prior technical training, with emphasis on diesel engines, hydraulic/hydrostatic systems, fuel systems, and electrical components is preferred., • Must possess standard tools for equipment repairs., • Attention to detail, organizational proficiency, and the ability to thrive in a dynamic and fast-paced work environment, • Capable of working in both indoor and outdoor settings, exposed to varying weather conditions such as heat, cold, wind, rain, along with potential elements like dust, dirt, and noise., • Work overtime as business needs arise. About Us: Woods Machinery is a second-generation family owned business providing equipment sales, rentals, and product support since 1984. We are an industry leading company dedicated to providing exceptional products and support to our customers. We take pride in our commitment to quality, customer satisfaction, and collaborative team environment. Please visit www.woodsmachinery.com to learn more about us, our products, and services.

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc241241

Comply with all SOP’s and GMP’s Qualifications: High school diploma or GED equivalent Courses from a junior college or technical institute, job-related seminars, or ongoing education Trade school certification or Associate degree preferred Minimum 3 years of maintenance mechanic manufacturing ex

Will be required to successfully complete the Rutgers Defensive Driving Course May be required to obtain Commercial Driver’s License.

Responsible for performing a wide range of electrical tasks, including estimation, procuring appropriate materials and repairing and installing electrical circuits, wiring, fixtures and controls. Must be competent in performing complex and varied repair and maintenance of electrical equipment and ci

Perform routine preventive maintenance checks on all production equipment and machinery. Machine set- up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.