Offres maintenance mechanic à Troy, New YorkCréer des alertes d'emploi

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $36 / hour + Paid OT Location: Halfmoon, NY Schedule: Monday to Friday, 2PM to 10PM + 6%-8% of base hourly rate paid for applicable hours worked Must be flexible to travel to other locations for support. Responsibilities: * The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. * Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Brands locations. * Respond to field service calls. * Order mechanical components, services and parts and maintain inventory. * Perform and document all phases of vehicle maintenance and repair, including diagnostics. * Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. * Maintain a unit history file for each vehicle Qualifications: * Must be 21 years of age or older. * Experience with both diesel /propane vehicles and air brake systems, preferably with heavy duty vehicles. * Engine and Chassis Diagnostic software experience. * Focus on safe work practices and high quality while executing duties under minimal supervision. * Accurately record and document all maintenance activity. * Ability to use fleet software for vehicle maintenance tracking, input work orders, and inventory management. * Workflow -- Daily Vehicle Inspection Report (DVIR) and US DOT requirements for commercial vehicles. * Ability to lift parts and equipment weighing up to 50 pounds. * Must have own set of personal tools. * Ability to meet Department of Transportation (DOT) driver qualification policy requirements. * CDL preferred; ability to obtain within six (6) months of entering the position (CDL may be required in some locations) Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Join Our Community of Food People! COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. STARTING PAY: $33+ / hour based on certifications and experience. Top Dollar for certs, experience and CDL SCHEDULE: Sunday - Thursday Evenings 4:00 PM - 12:30 AM Excellent Benefits starting DAY ONE! Including: * Weekly Paychecks! * $5,000 Retention bonus! * $250 Quarterly tool allowance, that's $1,000 extra per year! * Low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided, INCLUDING BOOTS REPLACED YEARLY! * Employee referral program. $1,000 per referral * 401K with FANTASTIC company match! * Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! GENERAL PURPOSE To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES * Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). * Perform preventative maintenance within DOT standards. * Receive road calls, assign third party vendor, and work with business partners on plan of action. * Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. * Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. * Backup to other maintenance shop personnel. * Willingness and capacity to assume increased responsibility and certificates. * Other duties as assigned by manager. QUALIFICATIONS * Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting competency relating to equipment repairs. * Successfully demonstrated independent analytical and problem-solving skills. * Prior experience in administering appropriate PM program. * Must furnish own personal hand tools. * Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). * High school diploma or equivalent required. * Must possess a valid driver's license. * Valid Class-A CDL license and DOT certification PREFERRED * Experience using fleet maintenance software PREFERRED * Welding ability PREFERRED WORK ENVIRONMENT * Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. * Must be willing to work in extreme temperatures and weather conditions. Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30 and $35. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___.

COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights 4:00 PM - 12:30 AM Pay range is $36-$45 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: * Weekly Paychecks! * $5,000 Retention bonus! * $250 Quarterly tool allowance * Low-cost Medical, Dental, and Vision for Family Coverage. * Paid vacation time, sick, and personal time. * Employee uniforms provided. * Employee referral program. $1,000 per referral * 401K with FANTASTIC company match! * Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! Basic Purpose: Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). ESSENTIAL DUTIES AND RESPONSIBILITIES * Perform preventative maintenance within company standards. * Complete documentation of all repair orders, PM list and parts accountability. * Handle road service calls; perform road rescue/transport equipment as needed. * Keep track of assigned repairs by logging in and out of the Shop Fax system. * Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. * Maintain inventory and proper recordkeeping. * Backup to other maintenance shop personnel. * Willingness and capacity to assume increased responsibility and Certifications. * Performs other duties as assigned. MINIMUM QUALIFICATIONS: * Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. * Diagnostic and troubleshooting ability using fleet maintenance software. * Successfully demonstrated independent analytical and problem-solving skills. * Must furnish own personal hand tools. * Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. * Ability to read and understand technical and service manuals. * Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. * Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. * Ability to adapt to changing organizational and operational needs. * Computer and software experience. * High school diploma or equivalent required. * Must possess a valid driver's license. PREFERRED QUALIFICATIONS: * JPRO software experience. * Welding ability * Knowledge with electrical schematics * Basic Microsoft Excel and Word skills. * Leadership experience or qualifications * Valid Class A CDL license and DOT certification * EPA 608 (Type 2 or Universal) certification Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $33.00 – $45.00/hour This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___. #LI-ED1

If you are currently an employee of Herc Rentals, please apply using this link: ___ Founded in 1965, Herc Rentals is one of the leading equipment rental suppliers in North America with 2025 total revenues reaching approximately $4.4 billion. Herc Rentals’ parent company, known as Herc Holdings Inc., listed on the New York Stock Exchange on July 1, 2016, under the symbol “HRI.” Herc Rentals serves customers through approximately 602 locations and has about 9,600 employees in North America as of December 31, 2025. As a Mechanic B, you are an expert technician and will assume an influential role in product knowledge and standards of quality within the branch. Mechanic B’s understand the standard operating procedures at the branch, region, and national level and serve as a mentor to C level mechanics. The primary focus of a Herc Rentals Mechanic B is to utilize their mechanical knowledge to support fleet maintenance operations needed to keep Herc Rentals equipment on the rental “ready line”. This goal can be achieved safely and professionally through an effective preventative and corrective maintenance program. • Maintain a consistent schedule of performing preventative maintenance of all Herc owned fleet at your branch, • Operate and test equipment to ensure it passes Herc Rentals quality and efficiency standards, • Perform routine maintenance and repairs on all Herc fleet equipment and trucks with minimal supervision, • Diagnose internal combustion engines, DC electrical systems, propane systems, hydraulics, and fuel systems, • Perform major repairs to maintain fleet equipment using diagnostic tools, hand tools, and measuring instruments with minimal supervision, • Conduct oil changes, lubrication of equipment, tire replacements, hose repairs, battery replacements and assorted services, • Utilize warranty repairs timeframes to save and mark parts, correct parts and labor on a work order, or contact vendor when necessary, • Enter work orders and complete part ordering via fleet management system, • Recondition and replace assorted parts of the heavy equipment, • Diagnoses problem areas for any significant wear or tear on the equipment, • Maintain work area in a clean and organized manner, • Produce timely and detailed service reports and repair logs, • Assist in training “C” Mechanics while taking direction from the shop lead, • Follow all company’s filed procedures and protocols, • Perform additional duties as assigned, • 2 years of experience in heavy equipment repair, • Ownership of sufficient selection of hand and air/electric tools to complete most repairs and services, • Ability to safely lift up to 50 LBs, • Ability to understand detailed technical schematics, owner manuals, and product warning labels, • Ability to operate and test equipment such as boom lifts, forklifts, compressors, portable and stationary generators, hydraulics, pumps and assorted tools and equipment, • Computer skills to support entering information into systems, • Ability to communicate effectively and efficiently, • Ability to drive/operate multiple types of vehicles and equipment, • Ability to follow up with customers in a timely manner, • Ability to handle assorted tools properly and safely, • Attention to detail, • Must possess solid written and verbal communication skills, • Understanding the importance of time management Req #: 65655 Pay Range: $30.00 per hour Please be advised that the actual salary offered for any position is subject to the company's sole discretion and may be influenced by various factors, including but not limited to the candidate's qualifications, experience, location, and overall fit for the role. Herc Rentals values its employees and provides excellent compensation and benefits packages which are not limited to the following. Keeping you healthy Medical, Dental, and Vision Coverage Life and disability insurance Flex spending and health savings accounts Virtual Health Visits 24 Hour Nurse Line Healthy Pregnancy Program Tobacco Cessation Program Weight Loss Program Building Your Financial Future 401(k) plan with company match Employee Stock Purchase Program Life & Work Harmony Paid Time Off (Holidays, Vacations, Sick Days) Paid parental leave. Military leave & support for those in the National Guard and Reserves Employee Assistance Program (EAP) Adoption Assistance Reimbursement Program Tuition Reimbursement Program Auto & Home Insurance Discounts Protecting You & Your Family Company Paid Life Insurance Supplemental Life Insurance Accidental Death & Dismemberment Insurance Company Paid Disability Insurance Supplemental Disability Insurance Group Legal Plan Critical Illness Insurance Accident Insurance Herc does not discriminate in employment based on the basis of race, creed, color, religion, sex, age, disability, national origin, marital status, sexual orientation, citizenship status, political affiliation, parental status, military service, or other non-merit factors. #Appcast

Cargill Animal Nutrition is a global business that serves large-scale feed mill operators and retailers, as well as individual farmers. Our business has provided better nutrition for better lives for more than 120 years. By leading, innovating, and transforming the animal nutrition & health industry, we ensure that the customers we serve, the animals we feed, and the consumers who rely on that protein, thrive. Working at Cargill is an opportunity to thrive – a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe. We depend on creative, responsible, hardworking individuals like you to operate our business successfully! Job Type: Full Time Shift Available: 2nd / 3rd Compensation: $28.00/hr-$40.00/hr New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits Information: • Medical, Dental, Vision, and Prescription Drug Insurance, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts A Typical Work Day May Include: • Completing preventative, predictive, and reactive industrial maintenance throughout the facility with limited direction, • Leverage knowledge and ability to operate 1 or 2 standard maintenance tools such as power tools, basic hand tools, electric tools, precision maintenance tools and preventative maintenance technology tools, • Demonstrate experience in 1 or 2 maintenance trades and components (ex. electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, and hydraulic and pneumatic systems), • Modify with some direction or instruction in either electrical or mechanical schematics, blueprints, and operation manuals, • Document completed work and the conditions found, utilizing maintenance computer software and interact regularly with peers and management to pursue continuous improvement of facility operations, • Operating forklifts, loaders, scissor lifts, and aerial lifts following standard production documentation to deliver to the correct location, • Understanding and adhering to all safety policies and procedures, • Maintaining a safe and clean work environment, • Other duties as assigned What You Will Need: • Eligible to work in the United States without visa sponsorship, • Must be 18 years or older, • Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation, • Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) including a respirator, • Ability to work in elevated areas (4 feet and above), • Ability to understand and communicate in English (verbal/written), • Ability to work in confined spaces, • Basic computer skills, • Ability to work overtime including holidays, nights, weekends, or different shifts with advance notice, • Demonstrate experience in 1 or 2 maintenance trades and components (ex. electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, and hydraulic and pneumatic systems) What Will Put You Ahead: • Experience performing maintenance trades such as rigging systems, bearings, and lubrication., • Experience with safe work practices, such as Pre-Job Hazard Analysis (PJHA), confined spaces, job task permitting, etc, • Trade school certification or degree in a maintenance related field, or relevant military experience, • Experience with precision maintenance, such as laser alignment and/or dial indication Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet. To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Job Title 2nd Shift - Maintenance Supervisor Primary Location County Waste Clifton Park, NY Salary: $95K - $100K and eligible to earn an annual bonus 2nd shift - 2pm to midnight This role offers the opportunity to pursue your passion for maintenance while expanding into office responsibilities. You will gain insights into budget management and the P&L aspects of the business. While you will continue to work closely with the team and assist mechanics directly, approximately 75% of your time will be dedicated to office-related tasks. Position Responsibilities: • Promotes a safe work environment in-line with our Corporate Core value of safety first., • Builds a strong team environment between maintenance personnel and operations department., • Lead, train, and mentor Preventative Maintenance Technicians, • Ensure location is in compliance with all state and federal regulations., • Ensure proper completion of repair orders by all technicians., • Responsible for the management of inventory and maintenance of equipment., • Trains and assists Technicians on methods for diagnosing and repairing vehicles and equipment., • Prioritizes maintenance based on operational needs and Technician skills., • Tests vehicles to troubleshoot problems and/or tests repairs to ensure proper and safe completion., • Communicate regularly with the fellow supervisor and District Maintenance Manager., • Assists Maintenance Manager in monthly financial projections and budget. Knowledge and Skills: • Must have ability to plan, budget, schedule, and supervise multiple projects from concept to completion., • Must have working knowledge of OSHA and DOT compliance requirements., • Must have ability to motivate staff and build a team friendly environment., • Must have excellent organizational, analytical and communication skills and ability to achieve cost effective solutions. Requirements: • 5+ years mechanic experience with truck, light or heavy equipment maintenance and repair. (Waste industry experience preferred), • Ability to train and motivate staff a must., • Knowledge of air brake, hydraulic and electrical systems., • Trade or Technical School Certificate preferred. High School or Equivalent required., • Proficiency in vehicle and equipment diagnosis and repair. Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Hiring Immediately! * $5,000.00 Stay-on Bonus! * Overtime Eligible * Annual boot allowance * Earn quarterly safety bonuses * Stable industry, year round employment * Weekly pay! Robert Wright Disposal, a Waste Connections company, is looking to add a Preventative Maintenance Mechanic to the team in Glenmont. Schedule: Monday through Friday, 7:00am to 4:00pm / 50-55 Hours per week. Rate: $27.00 per hour Why Choose Us? We are Waste Connections, an integrated services company that provides solid waste collection, transfer, disposal and recycling services to local residents and businesses throughout the U.S. and Canada. We’re proud to be a different kind of company with a different kind of culture. One where self-directed, empowered employees have our trust and full support to realize their potential as they strive to make a bigger and better impact on their communities and careers every day. Our priority is to make sure we hire mechanics that care about the safety of our drivers and the service provided to the community. As a mechanic with us the minimum responsibilities are: * Perform repairs and inspections, safety checks, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on diesel vehicles. * Utilize vehicle computer electrical systems to interpret failure modes to identify and adjust Engine and Vehicle Control modules * Respond to road calls for emergency repairs * Reviewing, Completing or assigning repairs identified on driver Vehicle Inspection Reports. * Completing required paperwork utilizing fleet maintenance software programs. * Test driving trucks after services and repairs * Helping other team members with repairs as needed * Having professional and courteous interactions with our drivers when needed. * Maintains a clean, safe work area in compliance with corporate and OSHA standards. * Perform other miscellaneous job-related duties as assigned. What we need from you: * Proficiency in a variety of diesel vehicle diagnostic tools, preventative maintenance and repair. * Basic tool set * Class B CDL or ability to obtain within 90 days of start of position * Hydraulic experience is a plus What you’ll get from us: * Competitive Compensation * 401(K) with company match; let us help you save for your future * Healthcare; Medical, Dental, Vision * Perks, perks, perks! Employee Assistance Mental Health Program, Emergency Travel Assistance, Prepaid Legal Plan, Scholarship Opportunities for kids, Employee Stock Purchase Plan, Employee Relief Fund * Insurance: Life, Short Term/Long Term Disability Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Job Description Take your mechanical skills on the road — and be the person customers rely on. Also searching: diesel mechanic, heavy equipment mechanic, field service technician, used equipment mechanic $28 – $39/hour + Up to $8,000 Sign-On Bonus Hourly pay — you’re paid for every hour worked (not flat rate) Schedule: Monday–Friday, 8:00 AM – 4:30 PM (with overtime opportunities as needed) At Thompson & Johnson Equipment, our mechanics don’t sit in a shop all day — they’re out in the field solving problems, helping customers, and making a real impact. We’re looking for an experienced Forklift Mechanics / Technicians to join our team in the Schenectady area. This is a road position, meaning you’ll work independently, travel locally, and take ownership of your day. What You’ll Do • Diagnose, troubleshoot, and repair forklifts and material handling equipment (electric, gas, and diesel), • Perform planned maintenance and safety inspections, • Use computer-based diagnostics and OEM resources to identify and resolve issues, • Manage and maintain your service van inventory, • Communicate directly with customers to explain repairs and recommend solutions, • Complete work orders accurately and on time, • Deliver quality work — fix it right the first time, • Road-based work – no shop environment, • Variety – different customers and challenges every day, • Local travel – serving the Schenectady and surrounding region, • Consistent weekday schedule — home most nights, • Minimum of 2 years of mechanical training and or experience (forklifts, heavy equipment, automotive, diesel, etc.), • Strong troubleshooting and diagnosing skills across hydraulic, electrical, and mechanical systems, • Ability to work independently with minimal supervision, • Solid communication and customer service skills, • Valid driver’s license with a clean driving record, • $28 – $39/hour based on experience (hourly — no flat rate), • Up to $8,000 sign-on bonus, • Company-provided service van, tablet, phone, uniforms, • Medical insurance as low as $5/week + FREE vision, • Dental, life, and supplemental coverage such as LTD, STD, Specified Disease like Cancer, Heart, Stroke and Kidney insurance, • 401(k) with 50% company match (up to 5%), • $500 annual tool allowance, • $600 annual well-being reimbursement, • $200 annual gym membership, • $100 annual boot allowance We’re a third-generation, family-owned company serving Upstate NY with a reputation for taking care of both our customers and our employees. • Average employee tenure: 10+ years, • Voted a Best Places to Work company by our employees (8 years running) Work Environment This is a hands-on, physical role requiring lifting, climbing, and working indoors and outdoors in all seasons. Prerequisites Profile assessment, physical (including eye, hearing and lead test) and drug testing for illegal substances. Apply Today If you’re an experienced mechanic who takes pride in your work and enjoys solving problems independently — we’d love to talk! Thompson & Johnson is an Equal Opportunity/Affirmative Action Employer, (M/F/D/V) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Teresian House - JobID: 500-34-205001-0-3641658-0 [Maintenance Mechanic] As a Maintenance Technician at Teresian House, you'll: Make inspections of rooms and perform necessary repair work; Perform preventative maintenance work according to checklist and keep records of completed inspections; Perform

New York State Gov - University at Albany [Field Technician / Maintenance Mechanic] As a Trades Generalist at the State of New York, you'll: Perform journey-level work in one trade and skilled and semiskilled level work in maintenance, repair and installation tasks; Troubleshoot heating and cooling

New York State Gov - Thruway Authority [Field Technician / Maintenance Technician] As a Service & Repair Mechanic at the State of New York, you'll: Diagnose mechanical or electrical problems for gas and/or diesel powered self-propelled and non-propelled automotive equipment; Use the tools, equipment

Experience with preventative maintenance (computerized preventative charts/data). CLICK HERE to view our Maintenance Mechanic Job Preview Video. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications.

Job Description TownePlace Suites Latham-Albany Airport is seeking a Maintenance Assistant to join their team! Our TownePlace Suites centrally located to Saratoga Race Course, RPI, SUNY Albany and Siena College and Downtown Albany is only 10 miles south. There are 114 pet friendly rooms consisting of studio, 1- and 2-bedroom suites with fully equipped kitchens, free Wi-Fi and smart TV’s. An indoor heated pool and fitness center are also available with safety restrictions in place. The TownePlace Suites Latham is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. The Maintenance Assistant will be responsible for the upkeep of the hotel property, assisting the Chief Engineer. Role: • Major duties include basic repair work, painting, wall covering, plumbing, electrical work, pool operations, preventative maintenance, and indoor and outdoor grounds upkeep., • Maintains all fixtures and equipment according to the preventative maintenance schedule and records such maintenance in log books as required by BLA and hotel brand., • Maintains and services pool and spa areas including testing and recording as stated by the state and local regulations. What You Bring: At least 2 years of mechanic experience in a hotel or a related field. HVAC, electrical, plumbing, boiler operations and general maintenance skills required. Must be able to bend, kneel, lift, push, carry and pull up to 75 lbs. Requires reaching overhead, climbing, crouching, and twisting. Valid drivers license required. What We Offer You: $18-19/hr At Buffalo Lodging, we are committed to keeping our most important assets – our employees – healthy, happy and productive. To achieve this, we offer a variety of benefits including the following: • Paid Weekly (Every Friday!), • Medical, Dental & Vision Insurance, • Competitive 401 (k) Retirement Savings Plan with Generous Employer Match, • Paid Vacation and Sick Time, • Paid Holidays, • Tuition Reimbursement, • Flexible Spending Account, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • Long-Term Disability Insurance, • Employee Assistance Program, • Hotel Discounts – for You, Your Friends and Family, • Monthly Employee Appreciation Activities & Events, • Learning and Development Opportunities

Job Description Have you heard of Mycelium? It's the root structure of mushrooms, growing just beneath the forest floor. We believe mycelium is the forests' best-kept secret. With a naturally savory umami flavor and a wonderfully meaty texture, mycelium is a delicious, naturally sustainable option for people seeking a meat alternative. At MyForest Foods, we grow this gourmet mushroom mycelium inside our vertical farm in big, WHOLE pieces that can be sliced up just like traditional cuts of meat. Our first product, MyBacon is winning the hearts of vegans and carnivores alike—and we're just getting started! Intrigued? If you're a motivated, inspired, passionate foodie with a drive to revolutionize the future of food, we should definitely talk. SUMMARY: The Industrial Mechanic is responsible for maintaining, troubleshooting, and repairing production equipment and facility systems to support safe and reliable operations. This role focuses on hands-on equipment repair, preventative maintenance, and practical problem solving in a manufacturing environment. The ideal candidate is mechanically inclined and comfortable diagnosing and repairing equipment issues in real time. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Troubleshoot and repair production equipment including steam systems, conveyors, pumps, motors, gearboxes, and drive systems., • Diagnose mechanical and basic electrical issues during production and restore equipment to safe operation., • Perform welding and fabrication repairs including stainless steel and aluminum., • Fabricate brackets, guards, and other components needed to support equipment repairs or improvements., • Perform preventative maintenance on production equipment and facility systems., • Support installation, repair, and modification of equipment and facility infrastructure., • Assist production teams in resolving equipment issues during active operations., • Maintain maintenance tools, parts, and workspaces in an organized and safe condition., • Participate in equipment improvement efforts that increase reliability and reduce downtime., • Respond to urgent equipment or facility issues when necessary, including power outages or system failures that may occur outside normal business hours (including occasional evenings, weekends, or early mornings)., • Maintain safe work practices and follow company safety procedures., • Strong mechanical troubleshooting ability., • Hands-on equipment repair experience., • Welding and fabrication experience preferred., • Familiarity with pumps, conveyors, motors, chains, belts, and gear systems., • Basic electrical troubleshooting ability., • Ability to safely use hand tools, power tools, and shop equipment., • High School Diploma or equivalent, • 3-5 years hands-on mechanical maintenance or equipment repair experience in manufacturing, industrial, mechanical or similar environments. The pay range for this position is $30 - $42/hour. If you're inspired by the potential of mycelium and the promise of a well-fed future, join us! Our team is always seeking passionate problem-solvers and forward-thinking foodies. You can expect.... • Immediate benefits (medical, dental, 401k, Employee Assistance Program, PTO starts on day 1!), • Multiple voluntary benefit options: vision, life, disability, pet insurance, legal support, • Paid time off: vacation, sick, personal, holidays, anniversary vacation, volunteer, • A highly engaged team, • Growth opportunities, • Team bonding experiences

Job Description SUMMARY: To help maintain/enhance the value of the property throughout the repair and maintenance of Center structures, furnishings, systems and equipment at the least cost in order to contribute to the maximization of the Center's profitability. DUTIES & RESPONSIBILITY • Assist customers when and where needed, • Perform interior maintenance functions including repairs of fixture, floors, floor tile repairs, paint and prep, concrete cut and sidewall repairs, ceilings and walls. Also includes replacement of lighting devices., • Performs exterior maintenance functions including: repairs of fixtures, roofs, parking lots, and replacement of lighting devices., • Performs preventative maintenance checks on all equipment to keep it in the best possible condition., • Make minor electrical and plumbing repairs on the property., • Performs preventative maintenance checks on HVAC systems, fire protection sprinkler systems and fire extinguishers., • Ability to work from ladders and scissor lifts and boom lifts., • Informs supervisor of potential problems with any equipment used or systems responsible for., • Ability and hands on experience with corded power tools associated with building. maintenance and repairs such as circular saw, table saw, sawzall, and drills., • Act as a liaison with contractors in areas where responsible for maintenance and repair. EDUCATION REQUIREMENTS: High School Diploma or GED required EXPERIENCE: Hands on familiarity with methods and means of Various building maintenance and repairs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts: in high, precarious places, in outside weather conditions, and is occasionally exposed to risk associated with various forms of building maintenance and repairs. The noise level in the work environment is equivalent to a busy shopping mall. Job Posted by ApplicantPro

Job Description POSITION: Airport Maintenance Technician This position follows all provisions of the CSEA collective bargaining agreement. SPECIALTY: Vehicle and Equipment Mechanic REPORTS TO: Vehicle Maintenance Supervisor LOCATION: ALB AIRPORT: Albany International Airport SUMMARY Performs a wide variety of tasks involved in repairing and maintaining electric, diesel, and gasoline powered vehicle and equipment by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Notifies and coordinates routine and non-routine repairs and maintenance with the Lead Vehicle and Equipment Mechanic., • Provides Lead Mechanic with lists of items requiring reorder or replacement., • Read job and/or preventive maintenance orders and observes and listens to vehicles/equipment in operation to determine malfunction and to plan work procedures., • Performs routine and non-routine inspection and maintenance on Airport vehicles and equipment., • Disassembles units such as engines, transmissions, or differentials and inspects parts for wear; overhauls and /or replaces engines and transmissions; repairs/recharges or replaces parts such as batteries pistons, rods, gears, valves and bearings; overhauls or replaces carburetors, blowers, generators, distributors, starters and pumps; rebuilds parts such as crankshafts and cylinder blocks; rewires or installs new ignition systems, lights, and instrument panes; relines and adjusts brakes, aligns front ends, repairs or replaces shock absorbers, and solders leaks in radiators; mends damaged body and fender parts; replaces and adjusts headlights and installs and repairs accessories such as radios, heaters, mirrors and windshield wipers; examines protective guards, loose bolts, and specified safety devices on vehicles, and makes adjustments; lubricates moving parts and drives repaired vehicles to verify conformance to specifications., • Inspects tools and equipment on a regular basis to ensure operational safety; attends various training session; performs routine shop keeping duties in order to ensure a safe hazard free work environment., • Participates in Total Quality Management Programs. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); minimum of three years experience in the repair and maintenance of light trucks and diesel equipment. Must be qualified on stick and mig welding; have computer tune up experience and knowledge of fuel injector and hydraulic systems. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to effectively present information in one-on-one and small group situations to suppliers and other employees of the organizations. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Must possess a valid New York State Driver’s C.D.L., Class B, License as a condition of employment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel crouch or crawl; talk or hear; and smell. The employee is occasionally required to sit. The employee must frequently lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception and ability to focus. EOE DFWP

Job DescriptionDescription: The Manufacturing Maintenance Mechanic performs preventative maintenance and/or repairs of dairy production and processing equipment such as engines, motors, pneumatic tools, conveyor systems, as well as utility related equipment. Duties will also include maintenance of building and support equipment. • Perform preventative maintenance as required on all industrial equipment in the plant including but not limited to conveyers, hydraulics, pneumatics, welding (arc/Heli-arc), gearboxes/drives, valves/pumps, federal fillers, n8 filler., • Able to troubleshoot and repair electrical systems up to 480v, 3 phase, read, and interpret electrical drawings., • Directs and coordinates assembly, fabrication, and installation activities to ensure equipment and systems conform to engineering design and internal specifications and standards., • Recommends design modifications to eliminate machine or system malfunctions or to improve safety, quality, or equipment operating parameters., • Interprets specifications, blueprints, and job orders to workers, and assigns duties., • Ensure compliance with all company policies, plant rules and regulations., • Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring., • Inspects and measures parts to detect wear, misalignment, or other problems., • Realigns and adjusts functional components and control instruments., • Locates damaged air and liquid hydraulic pipes, lines, or wires., • Starts machine and equipment to test operation following repairs., • Performs set-up and operates metalworking tools (i.e., drill press, grinder, etc.) for the repair or creation of existing parts., • Weld equipment and parts as needed., • Reads and understands schematic flowcharts and technical manuals., • Must follow GMP’s, SOP’s, and SSOP’s always., • Uses all personal protective equipment provided by the company in compliance with OSHA regulations., • Installs equipment for new electrical services (120v, 240v and 480v three phase), including wiring, conduit, panels, breakers, contactors, relays, times, and controls., • Performs electrical troubleshooting, maintenance, and repair work; installs or replaces circuit breakers, fuses, variable speed., • Diagnose refrigeration and electrical problems using technical drawings (for example, blueprints, electronic/mechanical schematics) and diagnostic tools (for example, multi-meter, laptop)., • Performs and assists in all operations maintenance activities. All applicable work is done in accordance with National, State and Local Electrical Codes., • Uses the company's computerized maintenance management system to record and access maintenance related information., • Assist the machine operators with training or troubleshooting to minimize equipment downtime. Ensure all repairs are documented., • Assist in training other maintenance staff as needed., • Thorough knowledge of electrical codes, practices, and techniques, tools, and equipment., • Considerable knowledge of and ability to use standard hand and power tools and equipment used in electrical maintenance activities., • Ability to use ladders, scaffolding, and operate hand and power tools in a safe, efficient manner., • Minimize water usage and the generation of wastewater within the scope of the position., • Follows all DFA GMP s and works in a manner consistent with all corporate and regulatory, food safety, quality, and sanitation requirements., • Assist as needed on all types of maintenance calls throughout the plant.Requirements:, • High School Diploma/GED or Technical School, • Minimum 3 years of skilled industrial maintenance experience., • Possess training / experience in at least two or more of the following Areas: Single and three phase industrial electricity and control systems AC/DC drive Systems Pneumatics / hydraulics systems Welding practices and techniques Machining /fabricating practices and techniques Industrial boiler operations Water Treatment Systems HVAC Systems., • Must be able to work a flexible schedule including weekends and holidays., • Considerable knowledge and application of safety standards and precautions pertaining to electrical work., • Training and experience in use of PLC's is a plus., • Prior experience in a food or bottling manufacturing environment a plus., • Ability to interpret simple to complex blueprints and schematics., • Proficient in Preventative Maintenance, over-hauls, modification, and fabrication., • Strong trouble shooting and problem-solving skills., • Able to read, write and speak English., • Ability to work in a fast-paced environment., • College Degree

Industrial Maintenance Mechanic Job Duties: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines

Aircraft Mechanic Job Description: Inspect and examine aircraft components, including de-icing systems, hydraulic systems and landing gear, for leaks, cracks, breaks or other issues Read and utilize blueprints, maintenance

Job Description About Us Fitzgerald’s Automotive LLC is an independent, family-owned repair and preventive maintenance center that has been serving the Lansingburg and Troy community since 1996. We pride ourselves on being a cost-effective, high-quality alternative to the dealership. Our shop is equipped with the latest technology, including Autel ADAS equipment, and we service everything from domestic and foreign cars to diesel trucks and motorcycles. We are a professional, clean, and drug-free shop looking for a dedicated technician to join our team. The Role We are seeking a skilled Automotive Technician. While we are primarily looking for a B-Level Mechanic, we are willing to provide advanced training for a motivated individual who has solid foundational experience but isn’t quite at the B-level yet. Pay & Benefits: • Competitive Pay: Compensation is based on experience. B-level technicians will start at a higher rate., • Stable Schedule: No weekends! Work Monday through Friday, 8:00 AM to 5:00 PM., • Perform high-quality diagnostic and repair services, including brakes, cooling systems, computerized engine diagnostics, and AC service., • Conduct routine maintenance such as oil changes, tire rotations, and NYS inspections., • Utilize advanced diagnostic equipment (Autel ADAS, etc.) for alignments and calibrations., • Maintain a clean and organized work environment., • Experience: Previous automotive repair experience is required. (No franchise mechanics), • Driver’s License: Must possess a valid and clean driver's license., • Drug-Free Policy: We maintain a strictly drug-free workplace. All candidates must be able to pass a drug test. Drugs of any kind are not tolerated., • Tools: Owning your own tools is highly preferred, though not an absolute requirement for the right candidate. If you are looking for a long-term home with a reputable family-owned shop, we want to hear from you.

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements: Compensation details: 22-45 Hourly Wage PI45f29e7b3004-25405-37630744

Job Description Monroe Tractor, a well-established and family-owned construction and agricultural equipment dealer, is hiring! With over 70 years of success and 18 locations across the Northeast, we proudly support more than 15,000 hardworking customers with exceptional service and industry-leading equipment. We are looking for experienced, motivated, and customer-focused Service Technicians to join our high-performing team. This is a valuable opportunity to work with cutting-edge equipment, enjoy a full benefits package, and grow your career with a company that puts people first. At Monroe Tractor, we believe in building lasting careers. As a respected name in the heavy equipment industry since 1951, we provide a stable and supportive work environment where our employees thrive. We are committed to investing in our people through ongoing training, the latest diagnostic technology, and clear advancement paths. As a family-owned business, we maintain a strong team culture, where everyone is treated with respect and given the tools to succeed. The Diesel Technician is a diesel mechanic with a strong background in diagnosing, maintaining, and repairing heavy equipment. You'll use your expertise in diesel engines and hydraulics to deliver top-tier service in a safe, efficient, and professional manner.. Top-Tier Technician Benefits • Annual Tool & Boot Allowance, • State-of-the-Art Shop Equipment & Diagnostic Tools, • Employee Discounts on Parts, Service, and Equipment, • Manufacturer Hands-On & Online Training, • Highly Productive, Team-Oriented Shop Environment, • Medical, Dental, and Vision Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Short-Term and Long-Term Disability, • Annual Performance Reviews & Bonus Program, • Perform diagnostics, maintenance, and repairs on diesel-powered equipment, • Utilize technical manuals, job orders, and your own expertise to resolve mechanical issues, • Conduct safety inspections and follow proper repair procedures, • Maintain a clean, organized, and safe workspace, • Test drive equipment to verify repairs, • Develop strong customer relationships through professional service, • Attend ongoing technical training sessions, • Experience as a Diesel Technician in construction or agricultural equipment preferred, • Strong mechanical aptitude with the ability to problem-solve effectively, • Ability to work independently while contributing to a team environment, • Excellent communication and customer service skills, • Comfortable using computer-based diagnostic tools and service software, • Valid driver's license with a clean driving record Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Range$20—$39 USD

Job DescriptionDescription: Role and Responsibilities: The Fleet Service Mechanic performs journeyman-level work in repairing, trouble shooting and maintaining a wide variety of diesel, and electric powered equipment. The Technician must know a wide range of mechanical procedures to include electrical, fuel systems, brakes, suspensions, preventative maintenance, welding, and any other related work. • Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts., • Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion., • Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, brake, steering and hydraulics., • Verifies vehicle performance by conducting test drives; adjusting controls and systems., • Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards., • Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance., • Provides emergency roadside services, minor repairs, and assists in vehicle recovery., • Perform other duties as assigned. Requirements: • High School diploma or GED equivalent., • Successfully pass drug screening., • Must have a minimum of 2 years journey-level mechanic experience., • Must be able to provide your own hand tools in both standard and metric and up to a minimum of ½ inch drive., • Must be willing to work overtime, weekends, holidays, and varying shifts, as required. Preferred Skills: • D.O.T. Class A CDL preferred., • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Must be able to work independently.

Job Description Job description: About Crane For over two centuries, Crane Stationery has been handcrafting exceptional fine stationery that makes memorable connections matter. Crane is shaping a new strategic vision and seeking sources of growth through innovative products, exciting partnerships, and its own website, while celebrating the extraordinary heritage, quality, and prestige of being an original American Maker since 1801. Industrial Mechanic Summary Industrial Mechanic Job Summary: As an Industrial Mechanic, you will maintain and repair factory machinery and equipment in a manufacturing environment. You will diagnose issues and troubleshoot mechanical problems, assemble and install mechanical components and equipment, and perform routine maintenance and repairs. You will also inspect and test equipment, adjust and calibrate equipment to meet specifications, and document all work performed. You must possess strong mechanical aptitude, excellent troubleshooting skills, and the ability to work independently. Some electrical knowledge is required for this position. Building maintenance skills are also preferred. Industrial Mechanic Duties • Assemble, install, and maintain industrial machinery and equipment., • Troubleshoot and repair mechanical, electrical, and pneumatic systems, • Read and interpret blueprints, schematics, and technical manuals, • Test, inspect, and adjust equipment to ensure proper operation, • Perform preventive and predictive maintenance, • Order parts and supplies as needed, • Maintain accurate repair and maintenance logs, • Troubleshooting mechanical and electrical systems, • Repairing and replacing defective parts, • Assembling new equipment, • Testing and calibrating equipment, • Reading and interpreting schematics, • Maintaining tools and parts inventory, • Ability to read and interpret mechanical drawings, • Ability to use hand and machine tools, such as lathes, milling machines, drill presses, and power saws, • Ability to use precision measuring instruments and electrical and electronic testing devices, • Ability to install and maintain industrial machines and equipment, • Ability to perform building maintenance duties, such as repairing plumbing and electrical issues. Work Location: In person, Latham, NY Plant Pay: From $30.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Day shift, • Monday to Friday, • Overtime, • Weekends as needed

Job Description Adirondack Tire & Mavis Tire - Automotive Mechanics Adirondack Tire & Service is proud to join the Mavis Tire family. We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service and retail tire sales centers in the Schenectady, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and, (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job Description Why do you want to work at Quality Carriers, QRS Union Shops? • Weekly Pay - Pay is $25.50 - $30 /hour depending on experience, • Sign on Bonuses - Up to a $7500 Sign on Bonus for a HM Mechanic (3 years of tanker experience is required), • Tool/Boot Reimbursement Program, • Referral Program, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day inspections (trailers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • High school diploma, completion of G.E.D., or equivalent vocational school preferred, but not required., • Dynamic, ambitious and engaged team player. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Job Description Why do you want to work as a Trailer Mechanic with QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: • Weekly Competitive Pay - Pay is $26.31- $31/ hour depending on experience and location., • Tool/Boot Reimbursement Program, • Referral Program, • Employee benefits: Union Benefits Trailer Mechanic Duties/Responsibilities • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day and HM-183 inspections (tankers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Order and receive parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Perform miscellaneous duties as assigned., • Must possess at least 3 years of experience in repair and service of trailers, hazmat tankers, and medium duty trucks., • Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems., • Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations., • Ability to use vehicle diagnostic software., • Minimum of 2 years as a fleet mechanic., • Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Job Description Heavy Equipment Mechanic Location: Albany, NY Company: Contractors Sales Company, Inc. Pay: Starting at $38.90+/hour, depending on experience Schedule: Monday - Friday, Day Shift (OT as needed) Union: Local 158 Operating Engineers What You Get • $38.90+/hour depending on experience, • Local 158 Union position, • Company-paid health insurance premiums, • Guaranteed weekly 401(k) contribution, • Profit-sharing bonus opportunity, • Annual tool allowance & clothing allowance, • Paid Time Off & Personal Time, • Steady work - no seasonal layoffs, • Over-Time opportunities Contractors Sales Company has been keeping New York's biggest projects moving for over 100 years - from the Thruway to the Albany Airport Connector. We're a well-established, family-oriented heavy equipment dealership seeking a Diesel Technician who knows how to get the job done right. If you take pride in turning wrenches, working with a crew, and keeping customer and Company owned equipment running smoothly, this role is for you. What You'll Be Doing • Diagnose and repair Company and customer-owned heavy equipment, • Work on excavators, wheel loaders, drill rigs, crushing plants, and more, • Troubleshoot diesel engines, hydraulics, electrical systems, and drivetrains, • Rebuild and install engines, transmissions, pumps, and components, • Perform preventative maintenance and quality repairs, • Communicate with the Service team and keep accurate service records, • 5+ years of heavy equipment repair experience (diesel, hydraulics, electrical, transmissions), • Trade school, military, or field mechanic experience considered, • Own tools, • Valid driver's license and clean driving record, • Strong troubleshooting skills and attention to detail, • Ability to read hydraulic and electrical schematics, • Physically able to lift 50+ lbs and handle daily shop work, • Reliable, organized, and able to work as part of a team Equipment You'll Work On Excavators, wheel loaders, drills, crushing and screening plants, articulating trucks, hydraulic breakers, and road wideners - including brands like Link-Belt, Hitachi, Rammer, Rokbak, Sandvik, and Anaconda. Why Mechanics Stay Here We offer steady work, great pay, and a shop that's run the right way. You'll work with quality equipment, a dependable crew, and management that understands the trade. If you know your craft and want a place where experience is respected, this is it - apply today. Contractors Sales Co. is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants for employment and do not discriminate based on race, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, military or veteran status, domestic violence victim status, or any other status protected by applicable federal, state, or local laws. Job Posted by ApplicantPro

ADUSA Distribution - - Responsibilities: Maintain and troubleshoot distribution equipment to ensure smooth warehouse operations.

ADUSA Distribution - - Responsibilities: Maintain and repair distribution equipment to ensure smooth warehouse operations.

This position will work closely and collaborate with the Senior Maintenance Mechanic and the Senior Facilities Maintenance Technician on maintenance needs and improvement projects while maintaining a strong work ethic and a focus on safety, quality, and cost effectiveness. With minimal guidance, the

We are looking for 2 - 2nd shift Maintenance Mechanics and 3- 3rd shift Maintenance Mechanics. The Maintenance Mechanic is responsible for keeping the equipment in good operating condition by performing preventive maintenance, machine tests, troubleshoots, removing technical issues, and performing e

Perform general facility maintenance, including basic electrical, plumbing, carpentry, painting, hardware replacement, and preventive maintenance. Inspect, diagnose, and repair hydraulic, electrical, and mechanical components. Conduct scheduled daily, weekly, monthly, quarterly, and annual inspectio

In this role, under minimal supervision, the Maintenance Mechanic will perform troubleshooting, repair, modification, installation, and preventative maintenance on packaging and process equipment, utilizing standard work practices to ensure production is completed in a safe and efficient manner. Our

Required: * Must be 18 years of age or older * No experience required and on the job training provided * No high school diploma, GED or college degree required Preferred: * One (1) year of similar work experience * Complete assigned preventive maintenance and reactive maintenance repairs requirin

Perform mechanical maintenance, troubleshooting, and repairs on plant equipment to ensure safe and reliable operation. Demonstrated capability in mechanical maintenance, troubleshooting, and equipment repair. Install, align, and maintain mechanical systems, including conveyors, crushers, and rotatin

Maintenance Mechanic - Multiple shifts available. Responsible for ordering and maintaining supplies to support all maintenance functions. Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc.