Trabajos welder en Troy, New YorkCrear alertas

Job DescriptionDescriptionAre you tired of roofing companies that don’t treat their people right? Do you feel like you’re a low priority to your company? You’re a one man team with no support? Inconsistent hours causing you stress? We know these are common concerns for people in the Roofing industry. Foremen on our teams say that there is a night and day difference between working for RoofingSource and all of their previous employers. Leave the stress behind and join RoofingSource, where our people are our most valuable asset. We are a family‑owned nationwide commercial roofing company. For over 20 years we’ve maintained excellence by servicing our clients with in-house teams only. We are looking for a Foreman with commercial roofing experience. Key Responsibilities • Install and maintain low-sloped roof systems (TPO, PVC, BUR, modified bitumen, EPDM); 5+ years experience preferred., • Operate tools and equipment including Leister welder, hot air gun, and propane torch (preferred)., • Follow job specs, warranties, safety guidelines, and quality standards., • Create client reports via tablet and use technology for communication/receipts., • Prior roofing or related trade experience is preferred but not required., • Ability to communicate professionally and effectively, • Work equipment including company phone, company vehicle, all tools and material included, • Medical, Dental & Vision Insurance, • Pet Insurance, • Short Term Disability, • Employer-matched 401(k), • Paid Time Off, • Health Savings & Flexible Spending Accounts (HSA) & (FSA), • Enterprise Discounts

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

Job Description Our Mission: Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Duties: Plan, layout, fabricate, assemble, weld, and inspect by performing the following duties: • Read and interpret blueprints, sketches, or product specifications to determine sequence and methods of fabricating lifting devices varying from small to very large assemblies, • Lay out and mark dimensions and reference lines on material to required specifications, • Set up and operate machines such as drill presses, torches, burn table, iron worker, automated saw, and other various machines used in metal fabrication, • Grinding and prepping of parts for fit up, • Welding of fit up assemblies using MIG welding (GMAW), • Produce a finished product that meets visual inspection, NTD inspection, and customer expectations by maintaining quality procedures, • Inspect assemblies and installation of material for conformance to specifications, • Layout workload and efficiently work through the day to ensure jobs stay on schedule, • Maintain a positive work atmosphere by behaving and communicating in an effective and courteous manner with customers, coworkers, clients, and supervisors, • Welding/Fabricating experience required (at least 3 years), • Ability to lift a minimum of 50 lbs., • Must demonstrate welding ability and pass in house weld test, • Mechanical aptitude, • Reading & writing skills- including ability to read a tape measure, blueprints, drawings, and more., • Good analytical, conceptual and planning skills, • Math aptitude up to adding and subtracting fractions and basic multiplication, • Ability to work independently and meet deadlines without constant supervision, but must also be able to work effectively with a team, • High school diploma or equivalent required, • Must work in a safe manner following safety procedures, • Ability to stand and work in various positions for extended periods of time, • Must maintain and keep clean equipment and welding environment, • MIG Welding (at least 3 years preferred) Bishop Lifting Products, Inc. and it’s subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We’re ready to help you start your new career path.

Job Description ASME Welder/Fabricator Location: Watervliet, NY Shift: 1st and 2nd Pay: $25-30/hr. Description: • Previous experience working under ASME codes and standards, • Ability to read blueprints, drawings, and schematics, • Ability to follow written instructions in English in a high-volume manufacturing environment, • Ability to follow safety rules and regulations, • Weld and fabricate various tanks and components to ASME Section VIII Division 1 Code standards. Welding includes FCAW / GMAW, SAW, SMAW, • Obtain company required certification for above within 60 days of hire, • Communicate effectively with supervisors and co-workers, • Safely operate equipment including overhead cranes (training provided), • Comfortable using electric grinding equipment, • Ability to lift up to 60 lbs. climb ladders, work at heights up to 16 ft., and periodically work in confined spaces, • Read and interpret manufacturing blueprints, • Health Insurance (Individual and Family options), • Dental Plan, • Company paid Life Insurance, • Vacation and Paid Holidays, • 401k with Company Match

This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured.Completing high quality TIG and MIG welds and using precision instruments.Cutting, bending, drilling, tapping, and similar operations as re

Nesco Resource - - Responsibilities: Perform TIG welding (GTAW) on various metals including stainless steel, aluminum, copper, and specialty alloys; Read and interpret blueprints, schematics, and weld symbols; Set up welding equipment and ensure proper adjustments based on materials and job specifi

Job Description MSP designs and constructs detention-grade correctional facilities and specialty modular units in a controlled manufacturing environment. Due to the specialized nature of our projects, we are seeking a welder with strong MIG welding experience and the ability to perform across multiple welding processes as needed. This position is ideal for welders who are adaptable, detail-oriented, and comfortable shifting welding techniques based on project scope, material, and fabrication requirements. Essential Duties & Responsibilities * Perform MIG welding (horizontal and downhill) as a primary function, while remaining capable of supporting additional welding processes as required. * Review construction plans and understand scope, materials, and weld specifications. * Secure components using knowledge of geometry, metal properties, weld shrinkage, and proper fabrication techniques. * Bolt, clamp, and tack-weld components to maintain proper alignment. * Prepare materials through cutting, grinding, and fitting prior to welding. * Set up and adjust welding equipment based on material thickness and project needs. * Read and interpret blueprints, isometrics, and fabrication drawings. * Follow OSHA and company safety standards at all times. * Perform additional duties as assigned to support department workflow and production demands. Knowledge, Skills & Qualifications * High School Diploma or equivalent required. * Minimum 1 year of welding experience preferred. * Experience with additional welding processes beyond MIG is highly preferred. * Ability to read and interpret blueprints and technical drawings. * Strong fabrication fundamentals and machining knowledge. * Willingness to cross-train and adapt to varying project requirements. * Strong problem-solving skills and attention to detail. * Motivated, dependable, and team-oriented. Physical Requirements * Ability to lift, carry, push, and move materials up to 50 lbs. * Ability to work at heights above five feet when required. * Must be alert, coordinated, and physically capable of performing welding duties safely. * Reasonable accommodations may be made as required by law. Compensation & Benefits * Starting $25.00+ per hour (DOE) * Competitive benefits package including: * Safe Harbor 401(k) * Health, Dental, and Vision Insurance * Company-paid Life and Disability Insurance * Paid Sick Time and Paid Time Off Work Environment: • Machine shop environment which may require the use of industrial hearing protection and/or other personal protective equipment. Affirmative Action/EEO Statement MSP Corp. is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without discrimination because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, disability status, protected veteran status, or any other federal, state, or local protected class.

Job Description Welder/Fabricator Pay: 25-35/hr. + 10% shift differential for 2nd shift Shifts: • 1st: 7am to 3:30pm (Mon-Fri), • HS Diploma or GED, • 2+ years of welding work experience, • Knowledge and experience in primarily Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Experience operating bridge cranes and forklift trucks preferred., • Must successfully complete a pre-employment weld test., • Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Cut, bend, drill, tap, and similar operations as required to fabricate intricate assemblies., • Operate bridge cranes and forklift trucks., • Must be able to read engineering fabrication drawings, layout, and weld structural fabrications., • Must follow written procedures and work instructions., • As an employee, you must maintain an average weld efficiency rating of 70% or better. The rating is based on historical data, • Proper utilization of Personal Protective Equipment (PPE), • Work within the scope of MWI's safety policies and procedures., • Health / Dental / Vision, • 401k with company match, • Paid Time Off, • Life Insurance, • Employee Assistance Program, • Overtime Opportunities

Job Description Welder/Fabricator Pay: 25-35/hr. + 10% shift differential for 2nd shift Shifts: • 1st: 7am to 3:30pm (Mon-Fri), • HS Diploma or GED, • 2+ years of welding work experience, • Knowledge and experience in primarily Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Experience operating bridge cranes and forklift trucks preferred., • Must successfully complete a pre-employment weld test., • Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting., • Cut, bend, drill, tap, and similar operations as required to fabricate intricate assemblies., • Operate bridge cranes and forklift trucks., • Must be able to read engineering fabrication drawings, layout, and weld structural fabrications., • Must follow written procedures and work instructions., • As an employee, you must maintain an average weld efficiency rating of 70% or better. The rating is based on historical data, • Proper utilization of Personal Protective Equipment (PPE), • Work within the scope of MWI's safety policies and procedures., • Health / Dental / Vision, • 401k with company match, • Paid Time Off, • Life Insurance, • Employee Assistance Program, • Overtime Opportunities

Job Title Welder Job Description This is your opportunity to obtain a dynamic and rewarding career at the Philips Latham, New York site where magnetic resonance imaging magnets are manufactured. Your role: • Completing high quality TIG and MIG welds and using precision instruments., • Cutting, bending, drilling, tapping, and similar operations as required to fabricate intricate assemblies encountered in cryogenic applications., • Reading and understanding drawings and supporting documents. You're the right fit if: • You have 1+ years of welding experience as well as experience using mechanical assembly tools., • You have a high school diploma or equivalent., • You can create high quality TIG and Mig welds and you can perform excellent vacuum leak tight TIG welds on aluminum., • You must be able to successfully perform the following minimum Physical, Cognitive and Environmental job requirements with or without accommodation for this Shipping/Warehousing position., • You have experience operating bridge cranes and forklift trucks, and you are able to read and write to follow documentation assembly procedures and sign off documentation as required. How we work together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company's facilities. Field roles are most effectively done outside of the company's main facilities, generally at the customers' or suppliers' locations. This is an onsite role on 1st shift working Monday-Friday 7:20pm-3:30pm. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help improve the lives of others. • Learn more about our business., • Discover our rich and exciting history., • Learn more about our purpose., • Learn more about our culture. Philips Transparency Details The pay range for this position in New York is $18.10 to $28.96. The actual base pay offered may vary within the posted ranges depending on multiple factors including job-related knowledge/skills, experience, business needs, geographical location, and internal equity. In addition, other compensation, such as an annual incentive bonus, sales commission or long-term incentives may be offered. Employees are eligible to participate in our comprehensive Philips Total Rewards benefits program, which includes a generous PTO, 401k (up to 7% match), HSA (with company contribution), stock purchase plan, education reimbursement and much more. Details about our benefits can be found here. At Philips, it is not typical for an individual to be hired at or near the top end of the range for their role and compensation decisions are dependent upon the facts and circumstances of each case. Additional Information US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa, now or in the future. Company relocation benefits will not be provided for this position. For this position, you must reside in or within commuting distance to Latham, NY. USA #EOS This requisition is expected to stay active for 45 days but may close earlier if a successful candidate is selected or business necessity dictates. Interested candidates are encouraged to apply as soon as possible to ensure consideration. Philips is an Equal Employment and Opportunity Employer including Disability/Vets and maintains a drug-free workplace.

Knowledge and experience in primarily Spray GMAW (MIG), GTAW (TIG), weld prep and plasma cutting.Experience operating bridge cranes and forklift trucks preferred.Must successfully complete a pre-employment weld test.Welding Certification from a recognized institution (preferred).Spray GMAW (MIG), GT

It is the policy of Philips to provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to race, color, ethnicity, religion, gender, pregnancy/childbirth, age, national origin, sexual orientation, gender identity or expression, disability

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Welder Job Duties: Interpret blueprints, drawings, and measurements to plan layouts.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

We are currently seeking 1st and 2nd shift Welder / Fitter for plate and structural fabrication work. WELDER/FITTER CAREER BENEFITS AT CUSTOM ENGINEERING.

Toolmaker / Fitter/Welder - Southeast - 1312. Fabricator / Welder to join their team in the Southeast.

Job Title: Machine Operator Location: Farmington, NY Summary: We are seeking a Machine Operator (Lv.In this position, you will operate production machinery used in the creation of high-quality weather stripping and specialty products.This is a hands-on role ideal for individuals who take pride in ac

FedEx - - Responsibilities: Provide safe and efficient operation of equipment used for the movement of packages/documents/heavyweight, dangerous goods and ULDs; Assist in the buildup/breakdown of pallets containing heavyweight freight; Serve as liaison between company and ULD repair vendor; Perform

Build Your Career With Curtis Lumber.Founded in 1890, Curtis Lumber is a family owned and operated building materials retailer, one of 100 largest and fastest-growing in the nation.Our employees enjoy competitive pay and excellent benefits coupled with ideal business hours allowing for a healthy wor

Under close supervision, the Material Handler performs physical and administrative tasks related to material handling such as shipping, receiving, order fulfillment, returns, and storage.This position lifts heavy items and operates a forklift.Unloads and directs movement of shipments from shipping a

Requisition Id: 386099 Business Unit: LTL Location: Albany, NY, US, 12205.What you'll need to succeed as a Forklift Operator at XPO Get a feel for the role.Watch this short video to see a day-in-the-life on an XPO dock.Minimum qualifications: Be at least 18 years of age Able to do basic math calcula

Pickup and delivery of cargo to and from various destinations usually within proximity of the consolidation/distribution center.The loading and unloading of trailers utilizing the same techniques, technology and procedures as a dock worker.Actual duties and schedule may vary depending on terminal lo

New opportunity for a Forklift Driver with a well-established local company! This is a temp-to-hire opportunity and is bus line accessible.Responsibilities of the Forklift Driver will include:.Accurately record received and shipped inventory.Prepare merchandise for shipment.Operate material handling

Join a small, close-knit warehouse team with one of the county's largest distributors of carwash equipment and components.In this permanent role, you spend part of your day operating a sit-down forklift to move materials and the rest building and selecting orders using an iPad and scanner.You suppor

Nesco Resource - - Responsibilities: Perform hand assembly of sub-systems and components; Read, interpret, and follow Standard Operating Procedures (SOPs) and assembly instructions; Operate manual hand tools and power tools for assembly and validation tasks; Use material handling equipment, includi

The Forklift Operator operates and manages the movement of materials to ensure a clean, organized facility, respects forklift safety criteria, and fulfills production needs.Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no

Casella Waste Systems - - Responsibilities: Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no repairs are needed.Notifies technician in advance when aware that equipment will need maintenance.Operates forklift while in a f