Medical engineer jobs in Commack, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Looking to push innovation forward? Join Radienz Living’s R&D team and help develop next-generation products in home and personal care. We’re looking for curious, solutions-driven individuals who thrive on experimentation, collaboration, and turning ideas into reality. Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Mt. Prospect and Bensenville, IL and Commack, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Lab Technician plays a critical role in all wipe product testing activities at Radienz Living. This position is responsible for testing samples for baby, facial, and MTT (Moist Toilet Tissue) wipe products. The role partners closely with other R&D team members to support product development activities. Responsibilities: • Perform testing under guidance from Scientist or Engineer; follow test protocol and record the data and observations during testing, • Analyze experimental data, interpret results, and make data-driven recommendations., • Prepare and maintain technical documentation, including specifications, test reports, and other documentation., • Prepare samples in the specific formats for sales meetings, industry conferences, tests or other business initiatives, • Follow all laboratory safety practices, chemical handling procedures, and company safety policies. Required Qualifications: • Bachelor’s degree in science or engineering, or equivalent industry experience., • Working knowledge of Microsoft Office Suite, including Word, Excel, and PowerPoint for documentation, data analysis, and presentations., • Any experience related to R&D lab work is preferred., • Any technical experience related to formula, trials or product development is preferred, • Knowledge of laboratory safety practices, chemical handling, and documentation standards., • Basic knowledge of research and development laboratory environment., • Basic knowledge of quality standard of wipe product analysis., • Ability to manage multiple tasks and meet aggressive timelines., • Effective written and verbal communication skills, including technical documentation., • High level of attention to detail, • Ability to work independently while also contributing effectively within a team environment. Physical Demands: • Ability to lift and move materials up to 50 lbs., • Frequently required to stand or walk for extended periods while conducting experiments or operating equipment., • Regular use of hands and fingers to handle laboratory instruments, pipettes, testing tools, or small components., • Frequent reaching, grasping, pushing, or pulling when setting up equipment or retrieving materials., • Close vision and ability to focus on detailed data, instruments, gauges, or microscopic materials., • Ability to move between laboratory workstations, testing areas, and production floors as needed. Work Environment: • Work is primarily performed in a laboratory or manufacturing test environment., • May involve exposure to chemicals, laboratory reagents, or production materials, requiring proper PPE., • Moderate noise levels from laboratory or manufacturing equipment may occur. We’re looking for passionate, driven individuals who want to make an impact—within our organization and beyond. If you’re ready to grow, contribute, and be part of something meaningful, we’d love to hear from you. Why join Radienz Living: • Medical, dental, and vision coverage, • 401(k) with company match, • 11 paid holidays, plus paid time off (PTO), • Flexible spending accounts, • Life insurance, AD&D, and supplemental coverage, • Opportunities for career growth through hands-on R&D experience, innovation projects, and cross-functional collaboration Equal Opportunity Statement: Radienz Living is an Equal Opportunity Employer and is committed to fostering a diverse and inclusive workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Location US-NY-Melville Company Canon U.S.A., Inc. Requisition ID 34074 Category Information Technology Position Type Full-Time Workstyle Hybrid Canon U.S.A., Inc. in Melville, NY is currently seeking a Generative AI & Data Associate Engineer (Assoc Engineer, Gen AI Data). We are seeking a highly motivated and talented entry level individual to join our Development & AI team. This role offers a unique opportunity to work on cutting-edge projects and gain hands-on experience in the field of artificial intelligence and software development. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. - Collaborate with the Development & AI team to design, develop, and implement AI-driven solutions • Assist in data collection, preprocessing, and analysis to support AI model development, • Contribute to the development of software applications and tools, • Participate in code reviews, testing, and debugging to ensure high-quality deliverables, • Conduct research on emerging AI technologies and present findings to the team, • Document project progress and provide regular updates to supervisors - Education: Bachelor's degree in a quantitative field such as computer science, mathematics or engineering. A strong academic record and a demonstrated interest in data science and artificial intelligence are essential, • Experience: 0-2 years relevant experience in data analysis, data engineering, software development, or research through coursework, projects, or previous internships. A portfolio showcasing skills and achievements is desirable, • Skills:, • Proficiency in programming languages such as Python, Java, or C++, • Experience with scripting languages like SQL & Python, • Familiarity with machine learning, deep learning, neural networks, Data Structures, Data Science and natural language processing, • Strong problem-solving skills and the ability to work independently and as part of a team, • Excellent communication and interpersonal skills We are providing the anticipated salary range for this role: $69,300 - $103,770 annually About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Hybrid - This position is full time and offers a hybrid work schedule requiring you to be in the office three days a week and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-HYBRID We can recommend jobs specifically for you! Click here to get started.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: \n • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost.\n, • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements.\n, • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches.\n, • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements.\n, • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation.\n, • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection.\n, • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis.\n, • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred.\n, • Extensive experience reading and interpreting complex technical drawings and specifications.\n, • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software.\n, • Deep understanding of mechanical and electronic assembly principles.\n, • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook.\n, • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail.\n, • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry).\n, • Familiarity with manufacturing standards, process documentation, and ERP systems.\n Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level II Support Engineer (Night Shift) to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system., • Work the evening and weekend shift our Support Team (with the commitment to two days a week off, schedule negotiable), to ensure excellent client after-hours support.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 2-4 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts., • Security related technologies (multifactor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • O365 Migrations and Management, • Wireless devices and networks., • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.)., • Microsoft Exchange Server and Cloud mail services., • MS Intune Experience, • VMware, • Implementation of Firewalls, • Implementation of Switches, • Meraki Wireless, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging Powered by JazzHR rpoNgRWn3u

Haugland Group, a privately owned Long Island, New York-based civil infrastructure and energy construction company, has an immediate opportunity for an experienced Civil Project Manager to join our team. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won’t be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what’s next because we see the path to get there and we’re setting a new standard of exceptional along the way. Let’s build together! Key Functions: • Responsible for overseeing the daily efforts of all project activities and personnel., • Supervise all work activity of the project, including all subcontractor work., • Responsible for the quality of work and development of their Project Team, including but not limited to the Project Engineer, Cost Engineer, and project support staff., • Monitor project scope for changes affecting budget and/or schedule; identifies cause, advise client, and negotiates change orders as appropriate., • Identify impacts to schedule and monitor cost., • Forecast and track the amount of labor, managerial and material costs necessary to complete a project., • Responsible for proper reporting of profit and loss of assigned projects as the job progresses. Must have a detailed and comprehensive understanding of project job costing to support monthly closing meetings., • Review revenue projections and accruals for accuracy. Adjust as needed., • Provide good communication with owner representative to ensure a good working environment., • Coordinate with the project team to determine needed resources (manpower, material, equipment, subcontractors, permits, etc.) throughout the life of the project with attention to budgetary limitations., • Plan all construction operations and schedule intermediate phases to ensure deadlines are met., • Understand the project scope, specifications and identify changes as they come. Communicate to the project team to make sure each change is properly documented. Desired Qualifications: • 10+ years of relevant experience, with experience working on heavy civil construction projects, bridges a plus., • Experience with NYC and State public agencies a plus., • Bachelor’s degree in civil engineering preferred., • Proficient in the use of Procore, P6, HCSS, and Microsoft Office., • Effective communication skills, interpersonal and organizational skills, and a strong work ethic. Why Haugland? The compensation range for this role is 150-190k. At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. • Excellent benefits package including medical, prescription drug, dental, vision, Health Savings Account (HSA), short/long-term disability, and life insurance, • 401k with 5% employer match, • Employer funded Dependent Care FSA, • Potential for annual performance-based raise, • Paid Time Off, • Paid company observed holidays, • Educational and professional advancement opportunities, • Frequent company-sponsored events, • Relaxed, friendly office, • Fast-paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company’s written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer.

Location US-NY-Melville Company Canon U.S.A., Inc. Requisition ID 34082 Category Engineering Position Type Full-Time Workstyle Hybrid Canon USA in Melville, NY is currently seeking a Salesforce Development Engineer (Engineer, Software Development). The Salesforce Development Engineer supports the design, development, and day-to-day stability of Salesforce across direct and indirect sales channels. This role works closely with the Senior Salesforce Engineer, Sales Technology, and IT teams to deliver enhancements, support consolidation efforts, and maintain reliable Salesforce operations. This is a hands-on role focused on Salesforce development, production support, and contributing to ongoing platform improvements. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. - Design, develop, test, and deploy Salesforce solutions using Apex, Lightning Web Components (LWC), Salesforce Flow, and declarative tools • Support Salesforce functionality for direct and indirect sales channels, including partner and reseller use cases, • Assist with Salesforce org consolidation and modernization efforts, including data validation, migrations, and cleanup of legacy functionality, • Provide production support and break/fix, troubleshooting Apex, Flows, permissions, integrations, and performance issues, • Build and support basic Salesforce integrations, including REST/SOAP APIs and Apex REST services, • Support IT-led initiatives requiring Salesforce development, reporting, or data analysis, • Participate in testing, deployments, and post-release validation, • Write clean, maintainable code and participate in code reviews, • Follow Salesforce security and data governance standards, • Stay current with Salesforce releases and best practices; suggest incremental improvements, • Timely delivery of Salesforce enhancements and fixes, • Reduced production issues and improved incident response times, • Effective contribution to consolidation and modernization initiatives, • Strong collaboration with Senior Engineers, IT, and Sales Technology partners, • Improved Salesforce reliability and maintainability - Bachelor's degree in an engineering discipline required, plus 3 - 5 years of related experience, or a Master's degree in the field. *A note on degree requirements for this title: the term "engineering discipline" refers primarily to a degree in Mechanical, Software or Electrical Engineering, with additional consideration given to candidates who have degrees in Mathematics, Applied Mathematics, Applied Physics, Biology or Chemistry if they have attended recognized engineering schools or otherwise demonstrate sufficient knowledge of engineering skills, • 3-5+ years of hands-on Salesforce development or solutions engineering experience, • Practical experience with:, • Apex, • Salesforce Flow, • Lightning Web Components (LWC), • Working knowledge of Salesforce data models, security, and governor limits, • Experience supporting Salesforce in a production environment, • Strong troubleshooting and analytical skills, • Ability to balance support work and project delivery, • Salesforce certifications (one or more preferred):, • Platform Developer I, • Salesforce Administrator, • App Builder, • Experience with:, • Direct and indirect sales channel models, • Salesforce integrations and APIs, • Org consolidation, data migrations, or platform clean-up, • Familiarity with:, • Salesforce DevOps tools or CI/CD (e.g., Copado, Gearset, Git-based workflows), • Agile delivery and cross-functional collaboration, • Exposure to Experience Cloud, Omni-Channel, Email-to-Case, or Salesforce AI features (Einstein / Agentforce) is a plus, not required We are providing the anticipated salary range for this role: $92,210 - $138,080 annually About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Hybrid - This position is full time and offers a hybrid work schedule requiring you to be in the office three days a week and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-HYBRID #ID22 We can recommend jobs specifically for you! Click here to get started.

Job Summary \n The Manufacturing Engineer 2 is responsible for the breakdown and definition of the labor effort required in accordance with Engineering and Quality Assurance specifications. \n Essential Functions \n\n • Compute cost estimates for new designs, and new customer designs, including established designs to reflect current goals and cost. \n, • Prepare detailed plan-schedule, estimates, and requisitions for special tooling and/or test equipment needed to manufacture and/or assemble parts to engineering requirements.\n, • Design and prepare tooling drawings such as drill, milling and assembly fixtures, punch and dies, etc. Prepare operation sheets for building assemblies. \n, • Make sketches as required to clarify fabricating or processing of parts, tools, or assemblies. \n, • Investigate shop problems with tools, parts or assemblies and applies the necessary corrective action with the affected work center. \n, • Coordinate with Engineering in the development of cost effectiveness and feasibility of new designs, as well as manufacturing and assembly methods. \n, • Incorporate engineering change orders to operation sheets. \n, • Liaison between manufacturing vendors and Purchasing Department. \n, • Prepare statements of work authorizing and guiding subcontractors in the fabrication of parts. \n, • Interface with subcontractors/customers in resolving manufacturing or drawing interpretation problems. \n, • Create and enter the Bill of Material and material code numbers in the Material Requirements Planning (MRP) system. \n, • Must be a U.S. Citizen.\n, • Ability to read, write and speak English proficiently.\n, • High School Diploma, GED or Industry experience preferred. \n, • Medical Dental, Vision, \n, • Life Insurance, Long-Term Disability \n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks accrued first year!) \n, • 10 Paid Holidays \n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n \n \tFor more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

An Engineer within our Consumer Medical Products division (CMIT) will independently manage and execute timely completion of engineering safety investigations for a wide variety of cutting-edge medical products, laboratory equipment, consumer technology equipment, and other devices. Coordinates lab

Job Description Data is pivotal to our goal of frequent launch and rapid iteration. We’re recruiting a Data Engineer at iRocket to build pipelines, analytics, and tools that support propulsion test, launch operations, manufacturing, and vehicle performance. The Role • Design and build data pipelines for test stands, manufacturing machines, launch telemetry, and operations systems., • Develop dashboards, real-time monitoring, data-driven anomaly detection, performance trending, and predictive maintenance tools., • Work with engineers across propulsion, manufacturing, and operations to translate data-needs into data-products., • Maintain data architecture, ETL processes, cloud/edge-data systems, and analytics tooling., • Bachelor’s degree in Computer Science, Data Engineering, or related technical field., • 2+ years of experience building data pipelines, ETL/ELT workflows, and analytics systems., • Proficient in Python, SQL, cloud data platforms (AWS, GCP, Azure), streaming/real-time analytics, and dashboarding (e.g., Tableau, PowerBI)., • Strong ability to work cross-functionally and deliver data-products to engineering and operations teams., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our Technology & Security Department. This role will report directly to the Director of Technology & Security and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a DevOps Engineer to join our Technology & Security Department. This role will report directly to the Director of Technology & Security and is responsible for implementing, maintaining, and improving our development and production operations infrastructure and product environments. The DevOps Engineer will work closely with Product Development, Infrastructure, and Security teams to support the software development lifecycle with a strong focus on automation and AWS cloud services. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Prototype and develop cloud-native architecture solutions in AWS using services such as EC2, S3, DMS, IAM, Route53, RDS, VPC, Lambda, SQS, SNS, EKS, CloudWatch, API Gateway, Cognito, Kinesis, OpenSearch, and more., • Implement and maintain infrastructure-as-code using tools like CloudFormation and Terraform., • Design, manage, and maintain automation for operational tasks and processes., • Develop and maintain roadmaps for AWS infrastructure updates and patches., • Define and deploy monitoring, metrics, and logging systems., • Support initiatives to improve system availability, scalability, and resilience (multi-AZ, multi-region, self-healing systems)., • Stay current with AWS technologies and recommend tools and services for integration into RouteSmart environments., • Automate software builds and deployments (CI/CD)., • Hands-on experience with automated infrastructure and infrastructure-as-code., • Proficiency in at least one high-level programming language (e.g., Java, C#, Python)., • Understanding of REST APIs and JSON., • Knowledge of AWS authentication and security best practices., • Strong organizational and communication skills., • Ability to visually present and communicate architecture and design., • Collaborative mindset with a commitment to high-quality work and continuous learning. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or equivalent work experience., • 2–4 years of experience working with AWS; AWS certifications are a plus., • Familiarity with modern development and operations methodologies., • Knowledge of serverless and containerization technologies is a plus. Benefits RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees with the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building both the space hardware and the ground / facility infrastructure needed to support frequent launches and mission operations. We are seeking an IT Specialist/Systems Administrator to support and grow our internal systems, networks, and infrastructure. This role will be key in ensuring reliable, secure, and scalable IT operations across the company. The Role • Maintain, support, and monitor internal IT systems (servers, workstations, network, cloud services, backups), • Plan and implement infrastructure upgrades, patches, and system improvements, • Administer identity and access management, permissions, and directory services, • Troubleshoot hardware, software, and network issues; provide helpdesk support, • Ensure cybersecurity best practices, security monitoring, and incident response, • Document IT architecture, policies, procedures, and system configurations, • Coordinate with external vendors, service providers, and contractors, • Support onboarding/offboarding of employees with IT provisioning Requirements • Bachelor’s degree in Information Technology, Computer Science or related field (or equivalent experience), • 3+ years of experience as a systems administrator, IT engineer, or similar role, • Experience managing Windows, macOS, and Linux environments, • Hands-on experience with networking (firewalls, VPN, switches, routing), • Familiarity with cloud platforms (AWS, Azure, GCP) and hybrid infrastructure, • Strong security mindset: experience with endpoint security, access controls, monitoring tools, • Ability to document, communicate, and collaborate with technical and non-technical stakeholders, • Proven ability to multitask, respond to urgent issues, and work in a fast-paced environment Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building the infrastructure—both in orbit and on the ground—needed to support frequent launches and mission operations. The Role: We are seeking a Construction Project Engineer to lead and support the development of iRocket’s factory, test, and facility infrastructure. This role will play a key role enabling our production and test operations by implementing facility projects, collaborating with contractors, and coordinating with internal stakeholders. • Support all aspects of project implementation from planning through execution, • Create scopes of work, obtain competitive bids, and oversee contractor selection, • Conduct job walk-downs and interface with vendors, engineers, and internal teams, • Review technical plans, drawings, and specifications to ensure alignment with project goals, • Monitor project schedule, budget, and deliverables, • Respond to scope, schedule, or deliverable questions from stakeholders, • Manage and maintain all project documentation (RFIs, submittals, change orders, etc.), • Bachelor’s degree in Engineering, Construction Management, Architecture, or related field, • Ability to read and interpret technical drawings, plans, and specifications, • Experience in facilities, infrastructure, or industrial construction in aerospace or high-reliability sectors, • Strong computer and software skills (project scheduling, documentation, collaboration tools), • Excellent verbal and written communication skills with internal teams, vendors, and contractors, • Aptitude for problem-solving, balancing scope, cost, and schedule Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Introduction Are you a technically curious problem solver who enjoys building systems that eliminate manual work and unlock the power of automation? We’re looking for an n8n Workflow Engineer to design and deploy sophisticated automation pipelines that connect AI models, internal IT systems, and LegalTech platforms. In this role, you’ll transform complex manual processes into secure, scalable workflows by leveraging APIs, scripting, and modern AI capabilities—helping our organization operate smarter, faster, and more efficiently. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Workflow Architecture: Design, deploy, and manage advanced n8n workflows connecting multiple platforms, databases, and APIs., • AI Integration: API connect Large Language Models (LLMs) and AI agents into workflows for document parsing, legal data extraction, and automated decision-routing., • API Management: Establish secure connections using Azure Graph, REST APIs, GraphQL, webhooks, and OAuth2 with Legal and IT SaaS products., • Custom Logic: Write specialized logic using JavaScript/TypeScript to process complex data payloads or interact with unique internal APIs., • Compliance & Security: Ensure all automations adhere to strict data privacy regulations, maintaining secure handling of sensitive legal and IT data., • Demonstrated experience building, deploying, and maintaining production-level workflows in n8n., • Strong proficiency in Scripting for writing functions and data transformations., • Deep understanding of API architectures, JSON, HTTP requests, and secure authentication methods., • Hands-on experience integrating AI APIs into functional business processes., • Experience with scripting, databases and Retrieval-Augmented Generation (RAG) pipelines., • Familiarity with specific LegalTech platforms or IT Service Management systems. 0ipTQKjWGh

Melville, NY is currently seeking a Generative AI & Data Associate Engineer (Assoc Engineer, Gen AI Data). Education: Bachelor’s degree in a quantitative field such as computer science, mathematics or engineering. Experience: 0-2 years relevant experience in data analysis, data engineering, softwa

We provide ongoing training and reward outstanding effort and results.Greet and welcome all customers coming into the dealership with a friendly attitude and uncover their needs.Answer phones, direct consumers to the proper department, and follow up promptly.Handle customer complaints diplomatically

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related

Medical Assistant Take patients histories and vital signs Obtaining patient history and vital signs Record vital signs in patient's medical record Take patient histories and vital signs Collect patient histories and records vital signs Obtain and record patient's vital signs Take and records patient

CM engineers also regularly team with vendor engineers to develop improved and more efficient manufacturing processes with a focus on improved manufacturing margin, improved performance, reduced cost, and/or reduced span. Required Combination of Knowledge and Skill Bachelors degree from an accredite

Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education. State licensed in New York, obtained by your One Medical start date. One Medical providers also demonstrate:.

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education. In February 2023 we marked a milestone when One Medical joined Amazon. Willing to obtain additional state licensure and credentialing for One Medical virtual primary care in additional states.

Coordinates efforts of many support groups including in-house crafts, engineers, and subcontractors. Develops project schedules and establishes funding levels based on engineered work scopes. Primary interface with all stakeholders including internal and external customers, project engineering, exec

Melville, NY is currently seeking a Generative AI & Data Associate Engineer (Assoc Engineer, Gen AI Data). Generative AI & Data Associate Engineer. Education: Bachelor’s degree in a quantitative field such as computer science, mathematics or engineering.

New York State Gov - Recreation & Historic Preservation Parks [Building Maintenance] As a Parks and Recreation Aide at the State of New York, you'll: Be responsible for general facility maintenance, customer service functions, and programming support; Maintain the park to ensure a clean and safe env

Bachelor's degree in industrial, Manufacturing Engineering. Collaborate with design engineering teams to enhance manufacturability of products.

Bachelor's degree in Operations, Engineering, Supply Chain, or related field. Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan.

Bachelor's degree in Engineering, Quality, or a related field preferred. FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. The Senior Quality Engineer is responsible

Project Manager / Senior Project Manager – MTA Infrastructure Projects.NYC | On-Site | General Contractor.Forte Construction is seeking an experienced .Project Manager or Senior Project Manager with direct MTA project experience.If your skills, experience, and qualifications match those in this j

We pride ourselves on craftsmanship, professionalism, and unmatched customer satisfaction.In order to make an application, simply read through the following job description and make sure to attach relevant documents.Project Manager for Commercial Installation & Modernization.This is a high-impac

Collaborate with Engineers, Architects, Subcontractors, Vendors, etc.

Description: HVAC Assistant Project Manager Salary: $50,000–$70,000 Location: Staten Island 10302 Type: Full-time TemPositions is pleased to partner with a well-established HVAC and mechanical contracting firm serving commercial and residential clients across NYC.We are seeking an HVAC Assistant P

At Gilbert, we create exceptional architectural interiors and immersive trade show environments for high-end luxury retail brands.As a boutique firm known for craftsmanship, creativity, and white-glove service, we thrive on turning complexity into beauty.Every project has many moving parts—and eve