Medical engineer jobs in New Rochelle, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Metric Geo are currently partnered with an industry leader in the geotechnical engineering space, looking to hire a Senior Geotechnical Engineer. Our client consistently rank in the ENR's Top 50 Worldwide Firms list, and are currently in the top 10 for "Best Firms to Work For". This is a hybrid opportunity based out of White Plains. Job Title: Senior Geotechnical Engineer Location: White Plains Experience: 5+ years industry experience, PE licence, BSc Civil Engineering A few benefits on offer: • Industry leading salary package., • Bonus opportunity., • Full benefits package including company paid medical, dental, and vision coverage, 401(k)/Roth with company match; paid time off etc., • Flexible work schedules., • Autonomy to lead projects and teams., • A chance to on work high profile projects both nationally and internationally! This is an opportunity suited to an individual who is looking for a step up in responsibility with a prestige engineering firm. Let's chat: 646 699 9238

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for consumers. Our team is made up of truth tellers, change agents, and consumer advocates who investigate and build coalitions to fight for fairness and justice in the marketplace for consumers. We leverage our evidence-based approach to demand safer products, a healthier environment, and equitable services for everyone. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW OVERVIEW We're looking for a lead AI/ML engineer to help execute on our strategic multi-year roadmap focussed on generative AI. As AI/ML Engineer, you will leverage emerging data technologies and applied AI/ML techniques/frameworks to build reliable, scalable and maintainable production-ready applications. You will report to the Assoc. DIrector, AI/ML & Machine Learning but work very closely with our Innovation Lab to stand-up and refine new digital products designed to help consumers navigate a digitally-driven economy, protect their digital security and make smart buying decisions. Let's inspire the next generation of Data+AI Professionals together. This is a hybrid position. This position is not eligible for sponsorship or relocation assistance. How you'll make an Impact: As a mission based organization, CR and our Software team are pursuing an AI strategy that will drive value for our customers, give our employees superpowers, and address AI harms in the digital marketplace. We're looking for an AI/ML engineer to help us execute on our multi-year roadmap around generative AI. As a Lead AI/ML Engineer you will: • Translate business needs into AI/ML projects with measurable impact., • Lead design, development, and deployment of production-ready AI/ML systems., • Build and maintain end-to-end AI/ML pipelines., • Collaborate with product managers, UI/UX, engineering, and other stakeholders., • Research and adopt new AI/ML tools and frameworks., • Promote responsible AI: ethics, data privacy, compliance., • Mentor and guide team members in engineering best practices.You'll Be Highly Rated If:, • You bring the Education & Experience:. You have a bachelor's degree in CS, Data Science, AI, or similar WITH 7+ years in AI/ML engineering, • You possess strong fundamentals in math, statistics, probability, machine learning, NLP, generative AI, • You are an expert in Python, SQL, Unix scripting; experience using major AI/ML libraries/frameworks, • You have experience with cloud environments (e.g. AWS, Databricks) building scalable production pipelines, • You are an excellent communicator; especially when working across teams. You'll be one of our top picks if:, • You have exposure to LLMs (OpenAI GPT3.5/4, BERT, BART, Dolly etc) #LI-CM1 Fair Pay And A Just WorkPlace At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation informed by location, as well as the candidate's particular combination of knowledge, skills, competencies, and experience. It is expected that most qualified candidates will fall near the middle of the posted salary range. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Salary ranges • NY/California: $165K-$190K annually, • DMW/Massachusetts: $143K-$165K annually

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for consumers. Our team is made up of truth tellers, change agents, and consumer advocates who investigate and build coalitions to fight for fairness and justice in the marketplace for consumers. We leverage our evidence-based approach to demand safer products, a healthier environment, and equitable services for everyone. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW Data is at the heart of CR's identity and mission; CR was created and continues to equip people with the credible, trustworthy information they need to make informed choices. The Data Engineer keeps the magnitude of that data flowing throughout the organization. Reporting to the Director of Data Architecture and Engineering, this role will develop software components within our data architecture, driving impact throughout CR. If you love collaborating within a team and throughout the organization, solving complex data problems, and want to make a meaningful impact, this is the role for you. This is a hybrid position. The successful candidate must be able to travel to our Yonkers, NY headquarters at least once per month. This position is not eligible for sponsorship. How You'll Make an Impact CR knows data powers our ability to move efficiently and with conviction. Your role will help us strengthen consumer influence, address consumer needs, and guide decision-making to achieve our goals. On a daily basis, you may: • Design, develop, and maintain robust, Data Applications and Services, scalable ETL/ELT data pipelines to ingest, transform, and store structured and unstructured data from various sources, • Assist in analyzing and defining technical requirements for data projects., • Ensure the quality and reliability of our data and solutions., • Support the deployment of data solutions and provide technical assistance in production environments.ABOUT YOUYou'll be Highly Rated If:, • You thrive on teamwork. The Data Team collaborates, coding pairs are the norm. You will work collaboratively to achieve shared goals while valuing differences, offering support and help and sharing knowledge and expertise to help the team., • You love data. We have a lot of data, and it's stored in many places. There are a lot of things to consider as you build solutions and work with teams across the organization. Bring your analytical and problem-solving skills, and your strong attention to detail in quality assurance. You'll Be One of Our Top Picks If:, • You have the degree. Bachelor's degree in computer science engineering or related field., • You have the experience. 2+ years of experience with Spring Boot and Angular. DC / MA - 100-110 NY / CA = 110-120K Consumer Reports is an equal opportunity employer and does not discriminate in employment on the basis of actual or perceived race, color, creed, religion, age, national origin, ancestry, citizenship status, sex or gender (including pregnancy, childbirth, related medical conditions or lactation), gender identity and expression (including transgender status), sexual orientation, marital status, military service or veteran status, protected medical condition as defined by applicable state or local law, disability, genetic information, or any other basis protected by applicable federal, state or local laws. Consumer Reports will provide you with any reasonable assistance or accommodation for any part of the application and hiring process.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job DescriptionSenior Electrical Engineer - Critical Facilities White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Senior Electrical Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for consumers. Our team is made up of truth tellers, change agents, and consumer advocates who investigate and build coalitions to fight for fairness and justice in the marketplace for consumers. We leverage our evidence-based approach to demand safer products, a healthier environment, and equitable services for everyone. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW Consumer Reports (CR) is an 89-year-young, non-profit, with a mission to create a fair and just marketplace for all, focusing on Safety, Sustainability, Financial Fairness, and Digital Rights. The organization is on a multi-year journey to transform how we use Data and AI more strategically. Customer Data is at the heart of our ability to understand, engage, and empower consumers — enabling us to drive personalized experiences responsibly. As a Software Engineer (Data and Personalization), you will develop and optimize data-driven solutions and integrations that enable personalization, experimentation, and insights across CR's martech and digital ecosystem. You will partner with product, marketing, analytics, data and technology teams to power data pipelines, experimentation, analytics and real-time personalization features. This is a hybrid position, with preference for candidates in the tri-state area. How You'll Make An Impact As a Software Engineer (Data and Personalization), you will be hands-on in building and scaling data solutions that directly shape CR's member experiences. On a daily basis, you'll contribute in the following areas: • Data & Analytics Engineering: Build and optimize scalable data pipelines across lakehouses, data warehouses, and curated data marts, ensuring clean, high-quality data that serve diverse organizational needs., • Customer Data and Personalization Integrations: Connect customer data ecosystem with auxiliary platforms/tools that enable event/data collection, audience segmentation, campaign orchestration, customer engagement, and experimentation—ensuring seamless flow of data to power personalized consumer journeys., • Business Intelligence (BI): Deliver analytics-ready datasets and create dashboards in Tableau to measure personalization impact and inform decision-making ABOUT YOU You'll Be Highly Rated If: • You have the right foundation: Bachelor's degree in a STEM with strong computer science and engineering fundamentals, • You have relevant experience: 5 years of hands-on experience working on projects involving customer data and analytics engineering, ideally with exposure to modern CDP, personalization and MarTech platforms (e.g., Segment, Braze, Optimizely), • You have experience with AI and ML. Familiarity with applying machine learning models, recommendation systems, or behavioral analytics to power real-time, hyper-personalized experiences., • You understand Customer Data Platforms (CDPs). Experience working with CDPs to enable a 360-degree customer view that supports product and marketing initiatives. FAIR PAY AND A JUST WORKPLACE At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation informed by location, as well as the candidate's particular combination of knowledge, skills, competencies, and experience. It is expected that most qualified candidates will fall near the middle of the posted salary range. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Salary ranges • NY/California: $145K-$155K annually, • DMW/Massachusetts: $135K-$145K annually

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Fire Protection and Plumbing Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP Critical Facilities Design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description We currently are looking for qualified candidates in our White Plains, NY office locations to work on Energy and Commissioning projects for our Building Engineering Division. LaBella’s Building Engineering Departments provides our employees a collaborative, professional working environment, allowing for personal growth and responsibility on a variety of significant projects that serve our target markets. The Energy & Commissioning engineer will work with other engineers and project managers as part of a project team to support the development of concepts, strategies, designs, drawings, specifications and reports for new Building and Renovation projects with an Energy and/or Commissioning focus. Responsibilities • Perform energy audits and feasibility studies to identify Energy Conservation Measures., • Complete utility data analysis and evaluation of energy usage., • Perform basic energy savings calculations, making educated assumptions when applicable and using / interpreting data gathered from the field to estimate savings., • Develop design concepts in technical documentation. May assist with mechanical design projects as required., • Able to interpret complex plans and specifications and apply available information to ensure that all project design requirements are satisfied., • Plan, perform and document the commissioning of various Mechanical and Electrical Systems to ensure the intended operation., • Conduct on-site investigation and inspection of multi-discipline projects., • Takes a lead role in resolving construction problems, procedures, and methods., • Minimum 5 years of relevant job experience., • Bachelor of Science in Mechanical Engineering (or equivalent), • Obtained or in pursuit of a NYS PE License., • Energy and/or Commissioning certifications from industry organizations is a plus (CEM, CBCP, BCxP, BEAP, etc.), • Functional working knowledge of M/E/P/FP, building automation systems as well as system design and construction processes., • Proficient with building modeling software programs. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description MECHANICAL HVAC ENGINEER Consulting Engineering Firm in White Plains, New York has an immediate opening for a Mechanical Engineer with a minimum 3 years experience in Heating Ventilating and Air Conditioning. Our firm provides Design Engineering Services to Owners and other Design Professionals in the Tri-State area. We serve a wide variety of clients including Residential, Commercial, Industrial, Recreational and Institutional projects. The applicant should possess a Design Engineering background in HVAC with strong organizational and communication skills and the ability to multi-task. AutoCad experience and drafting proficiency is required. Position is ideal for a team oriented individual interested in an exciting working environment. Benefits include Medical and Profit sharing plans. If you are looking for a long term position at an awesome company we are the place for you!!! Salary is based on Experience. Company DescriptionMechanical EngineerMechanical Engineer

Job Description LaBella Associates is currently seeking a Transportation Project Engineer in our White Plains, NY, office location. The successful candidate must be technically astute in transportation and/or highway engineering and have a proven background in the development of transportation and/or highway projects. This role will often perform as a project manager on some assignments or project engineer on larger size projects. Duties. • Performs technical discipline tasks including research, reports, design, specification and plan preparation to ensure the most efficient and cost-effective execution of assigned projects., • Assist Project Managers with business development activities, including meeting with clients., • Bachelor's degree in Civil Engineering required., • 0-5 years of progressive transportation design experience., • PE is preferred or obtaining one., • Experience on NYSDOT, NYSTA, and Local Administered Federal Aid transportation projects., • Experience with Microstation / AutoCAD. Inroads experience a plus., • General knowledge of NYSDOT specifications and standards., • Strong oral and written communication skills and interpersonal relationships skills. Salary Range: $70,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Seeking a Senior Geotechnical Engineer to join our corporate office in New Rochelle, NY Job Description • Lead the design and analysis of excavation support systems, including slurry walls, secant pile walls, sheeting, soldier pile and lagging, underpinning, and bracing systems., • Review geotechnical site investigation reports and interpret soil and rock conditions., • Review drawings, specifications, and technical documents related to SOE and foundation systems., • Prepare temporary SOE design submittals with PE stamp., • Collaborate with in-house structural engineers, field operations teams, estimators, and external subconsultants., • Ensure compliance with applicable codes, regulations, and project-specific requirements. Requirements • Bachelor's and/or master's degree in civil engineering with a focus in Geotechnical Engineering., • Professional Engineer (PE) license in New York or New Jersey (required)., • 10-15 years of professional experience in geotechnical engineering with an emphasis on underground excavation and SOE design., • Strong knowledge of geotechnical design methods, soil-structure interaction, and construction practices in urban environments., • Proficiency with geotechnical and structural analysis software (e.g., PLAXIS, LPILE, Shoring Suite, or similar)., • Excellent communication, technical writing, and coordination skills., • Experience with projects adjacent to subways, railroads, or other sensitive structures., • Familiarity with MTA, NYCDOT, and NJDOT standards and procedures. Desired Skills and Experience Job Description • Lead the design and analysis of excavation support systems, including slurry walls, secant pile walls, sheeting, soldier pile and lagging, underpinning, and bracing systems., • Review geotechnical site investigation reports and interpret soil and rock conditions., • Review drawings, specifications, and technical documents related to SOE and foundation systems., • Prepare temporary SOE design submittals with PE stamp., • Collaborate with in-house structural engineers, field operations teams, estimators, and external subconsultants., • Ensure compliance with applicable codes, regulations, and project-specific requirements. Requirements • Bachelor's and/or master's degree in civil engineering with a focus in Geotechnical Engineering., • Professional Engineer (PE) license in New York or New Jersey (required)., • 10-15 years of professional experience in geotechnical engineering with an emphasis on underground excavation and SOE design., • Strong knowledge of geotechnical design methods, soil-structure interaction, and construction practices in urban environments., • Proficiency with geotechnical and structural analysis software (e.g., PLAXIS, LPILE, Shoring Suite, or similar)., • Excellent communication, technical writing, and coordination skills., • Experience with projects adjacent to subways, railroads, or other sensitive structures., • Familiarity with MTA, NYCDOT, and NJDOT standards and procedures. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Job DescriptionLaland Baptiste, LLC is a construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include the NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. Overview: Laland Baptiste is looking for an enthusiastic Construction Inspector/Resident Engineer with a valid NICET Level IV certification to support construction supervision services on infrastructure projects in Queens, NY as part of our continuous recruitment process, for current or future project opportunities. We are looking for a highly experienced Resident Engineer with NICET Level IV certification to manage a multidisciplinary inspection team on a high-profile infrastructure project. This role demands technical expertise, leadership, and collaboration with agencies and contractors. Responsibilities: • Oversee all construction inspection activities from NTP to close-out, • Supervise inspection staff and coordinate with designers, PMs, and public agencies, • Manage contractor performance, issue change orders, and process pay estimates, • Ensure project compliance with safety and quality standards, • Prepare executive-level reporting and project documentationQualifications:, • NICET Level IV Certification, • Bachelor’s degree in engineering preferred (or 10+ years of related experience), • Strong knowledge of NYSDOT standards, SiteManager, and infrastructure projects, • PMP or CCM certification a plus, • Valid driver's license and ability to travel daily, • OSHA 30Pay Rate: $65.00-$80.00/Hourly Salary. Actual compensation will depend on the individual’s qualifications, education, skills, and experience. Benefits of Working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR NWATdyxtGB

Job Description Company Overview: At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters . We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation to make the communities we serve more sustainable and livable. Our mission is to offer the best combination of multi-modal sharing technology and seamless customer service, so users can unlock joy in their day! We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own solutions. Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hours Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Shifts: Monday to Thursday 10am to 2pm (Part-Time) Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo's Repair Technician! At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions. Job Summary: Veo is seeking part-time repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit. Responsibilities: • Perform comprehensive repairs on Veo's electric bikes/scooters from tightening a bolt to replacing a motor, • Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards, • Follow processes to log and track maintenance record, • Track inventory levels for spare parts on an ongoing basis, • Maintain excellent warehouse organization and set example for teammates, • At least 1+ years of experience in maintenance/ auto repair, • Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs, • Problem-solving mindset and self-motivated, • Comfortable with navigating and using smartphone apps, • Previous maintenance experience in bikes, scooters, motorcycles, or automotives, • Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO, • Opportunity to help make the community safe and sustainable, • Free Veo credits!, • Flexible work hoursBelow is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $18.50—$19 USD

Job Description Apply Here: Pay: $110,000.00 - $120,000.00 per year Job description: Vitreoretinal Consultants, one of the largest providers of the Retina subspecialty within Ophthalmology is seeking an IT Technician to work in our NY offices. In this role, you will be an important part of the team whose job is to support the IT Manager in the delivery of exceptional retina care to our patients. This position requires dedicated individuals who enjoy working with staff and doctors. You will also be required to travel to our other locations in Great Neck, Westbury, Riverhead, Rockville Center, Hauppauge, Flushing, Scarsdale, Elmhurst and New City. To learn more about our business visit. This FT position is 95% IT and 5% Facilities management. The individual will work as a team member with our current IT and Facilities managers. Skills required: • Strong computer server maintenance experience, • The applicant MUST have a current Microsoft Certification as well as a current VM Ware certification., • Expert knowledge of IT best practices, policies, and regulations, • Willing to train staff, • In-depth understanding of programming, computer science and digital security, • A clear understanding of client/server technology and network architecture, • Good communication, including writing, speaking and active listening, • Strong problem-solving, critical thinking and decision-making skills, • Customer service and interpersonal skills, • Excellent attention to detail, • Great project management skills, including organization, planning, time management and prioritization. The IT Technician is responsible for several different tasks related to overseeing a company’s computer networks and improving the company’s network systems. Some of their daily responsibilities include: • Developing new network troubleshooting strategies to help reduce downtime and decrease maintenance costs., • Creating rational strategies for upgrading the company’s network software whenever a new update is available, • Constructing and implementing plans to ensure the company’s network continues to operate smoothly in the event of a problem, • Staying up to date with new network technology and reporting this information to the executive team each quarter, • Working closely with other department Managers to assess the growth needs and maintenance of the company’s network, • Run cables as needed, • Work with our software vendor ensuring servers are fully operating for all locations, troubleshoot and fix any downtime outages, • Create all employee network log ins and door access, • Monitor employee internet usage, • Assist the compliance officer to ensure SRA are performed yearly, • In charge of purchasing and installing all equipment and computer set-ups for employees and physicians, • Facility and Alarm system monitoring, alert CEO, CFO and/or Practice Administrator of any alerts, • Equipment inventory management, • Assist in Price shopping for new equipment, • Equipment problem trouble shooting, • Equipment installation Pay: $110,000.00 - $120,000.00 per year Benefits: • 401(k), • Health insurance, • Dental insurance, • Vision coverage, • Driver's License (Required) Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Education: • Bachelor's License/Certification: • Driver's License (Required), • VMware Certification (Required), • Microsoft Certified: Azure Data Engineer Associate (Required), • Microsoft Office Specialist (Required) Ability to Relocate: