Trabajos medical engineer en Hauppauge, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Looking to push innovation forward? Join Radienz Living’s R&D team and help develop next-generation products in home and personal care. We’re looking for curious, solutions-driven individuals who thrive on experimentation, collaboration, and turning ideas into reality. Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Mt. Prospect and Bensenville, IL and Commack, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Lab Technician plays a critical role in all wipe product testing activities at Radienz Living. This position is responsible for testing samples for baby, facial, and MTT (Moist Toilet Tissue) wipe products. The role partners closely with other R&D team members to support product development activities. Responsibilities: • Perform testing under guidance from Scientist or Engineer; follow test protocol and record the data and observations during testing, • Analyze experimental data, interpret results, and make data-driven recommendations., • Prepare and maintain technical documentation, including specifications, test reports, and other documentation., • Prepare samples in the specific formats for sales meetings, industry conferences, tests or other business initiatives, • Follow all laboratory safety practices, chemical handling procedures, and company safety policies. Required Qualifications: • Bachelor’s degree in science or engineering, or equivalent industry experience., • Working knowledge of Microsoft Office Suite, including Word, Excel, and PowerPoint for documentation, data analysis, and presentations., • Any experience related to R&D lab work is preferred., • Any technical experience related to formula, trials or product development is preferred, • Knowledge of laboratory safety practices, chemical handling, and documentation standards., • Basic knowledge of research and development laboratory environment., • Basic knowledge of quality standard of wipe product analysis., • Ability to manage multiple tasks and meet aggressive timelines., • Effective written and verbal communication skills, including technical documentation., • High level of attention to detail, • Ability to work independently while also contributing effectively within a team environment. Physical Demands: • Ability to lift and move materials up to 50 lbs., • Frequently required to stand or walk for extended periods while conducting experiments or operating equipment., • Regular use of hands and fingers to handle laboratory instruments, pipettes, testing tools, or small components., • Frequent reaching, grasping, pushing, or pulling when setting up equipment or retrieving materials., • Close vision and ability to focus on detailed data, instruments, gauges, or microscopic materials., • Ability to move between laboratory workstations, testing areas, and production floors as needed. Work Environment: • Work is primarily performed in a laboratory or manufacturing test environment., • May involve exposure to chemicals, laboratory reagents, or production materials, requiring proper PPE., • Moderate noise levels from laboratory or manufacturing equipment may occur. We’re looking for passionate, driven individuals who want to make an impact—within our organization and beyond. If you’re ready to grow, contribute, and be part of something meaningful, we’d love to hear from you. Why join Radienz Living: • Medical, dental, and vision coverage, • 401(k) with company match, • 11 paid holidays, plus paid time off (PTO), • Flexible spending accounts, • Life insurance, AD&D, and supplemental coverage, • Opportunities for career growth through hands-on R&D experience, innovation projects, and cross-functional collaboration Equal Opportunity Statement: Radienz Living is an Equal Opportunity Employer and is committed to fostering a diverse and inclusive workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: \n • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost.\n, • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements.\n, • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches.\n, • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements.\n, • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation.\n, • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection.\n, • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis.\n, • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred.\n, • Extensive experience reading and interpreting complex technical drawings and specifications.\n, • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software.\n, • Deep understanding of mechanical and electronic assembly principles.\n, • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook.\n, • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail.\n, • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry).\n, • Familiarity with manufacturing standards, process documentation, and ERP systems.\n Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level II Support Engineer (Night Shift) to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system., • Work the evening and weekend shift our Support Team (with the commitment to two days a week off, schedule negotiable), to ensure excellent client after-hours support.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 2-4 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts., • Security related technologies (multifactor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • O365 Migrations and Management, • Wireless devices and networks., • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.)., • Microsoft Exchange Server and Cloud mail services., • MS Intune Experience, • VMware, • Implementation of Firewalls, • Implementation of Switches, • Meraki Wireless, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging Powered by JazzHR rpoNgRWn3u

Job Summary \n The Manufacturing Engineer 2 is responsible for the breakdown and definition of the labor effort required in accordance with Engineering and Quality Assurance specifications. \n Essential Functions \n\n • Compute cost estimates for new designs, and new customer designs, including established designs to reflect current goals and cost. \n, • Prepare detailed plan-schedule, estimates, and requisitions for special tooling and/or test equipment needed to manufacture and/or assemble parts to engineering requirements.\n, • Design and prepare tooling drawings such as drill, milling and assembly fixtures, punch and dies, etc. Prepare operation sheets for building assemblies. \n, • Make sketches as required to clarify fabricating or processing of parts, tools, or assemblies. \n, • Investigate shop problems with tools, parts or assemblies and applies the necessary corrective action with the affected work center. \n, • Coordinate with Engineering in the development of cost effectiveness and feasibility of new designs, as well as manufacturing and assembly methods. \n, • Incorporate engineering change orders to operation sheets. \n, • Liaison between manufacturing vendors and Purchasing Department. \n, • Prepare statements of work authorizing and guiding subcontractors in the fabrication of parts. \n, • Interface with subcontractors/customers in resolving manufacturing or drawing interpretation problems. \n, • Create and enter the Bill of Material and material code numbers in the Material Requirements Planning (MRP) system. \n, • Must be a U.S. Citizen.\n, • Ability to read, write and speak English proficiently.\n, • High School Diploma, GED or Industry experience preferred. \n, • Medical Dental, Vision, \n, • Life Insurance, Long-Term Disability \n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks accrued first year!) \n, • 10 Paid Holidays \n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n \n \tFor more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

Date Posted: 2026-02-20 Country: United States of America Location: US-NY-BOHEMIA-355 355 Knickerbocker Ave KNICKERBOCKER Position Role Type: Unspecified U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance Type: Security Clearance Status: Not Required Aerospace Lighting Corp. d/b/a Collins Aerospace has an opening for a Senior Engineer, Engineering-Operations in Bohemia, NY. Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. What YOU will do \n • Plan and perform professional manufacturing engineering activities with various complexities by applying engineering design principles and product line experience.\n, • Apply engineering principles to design, develop, test and implement various assembly fixtures and aid tools.\n, • Prepare plan, process specifications and procedure, MRP support studies, factory cost work.\n, • Conduct analysis and test of routine degree of complexity.\n, • Analyze engineering data and change notices to create manufacturing bill of materials and routings for various product lines.\n, • Implement, develop and maintain product/process improvement.\n, • Perform root cause analysis with various teams.\n, • Analyze and find solutions technical, operation and quality issues related to production line.\n, • Participate in product review and evaluate manufacturability of new product designs.\n\n Qualifications You Must Have \n • Must possess at least a bachelor's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 5 years of progressive experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment. In the alternative, must possess at least a master's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 3 years of experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment would be acceptable.\n, • Must possess at least 3 years of experience supporting a Manufacturing Shop Floor in the Aerospace industry with use of Macola, Teamcenter and SharePoint.\n, • Must possess at least 3 years of experience with 3D CAD design software and manufacturing drawing creation, with Expert Level Knowledge in 3D Design Tools (Solid Edge, CATIA, SOLIDWORKS).\n, • Must possess at least 3 years of experience implementing Lean Manufacturing Principles and methodologies.\n, • Must possess at least 3 years of experience designing assembly and testing fixtures for complex aircraft lighting products.\n, • Non-US Person - Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. \n\n Learn More & Apply Now! Interiors: At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? Onsite: Employees who are working in Onsite roles will work onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range is $129,251.00 to $182,000.00 USD per year. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

Job Description Engineer the Future of Manufacturing – Join as a Manufacturing Engineer in Aerospace Location: Bohemia, NY Job Type: Full-Time Consultant (18 Months) Schedule: Monday–Friday | 1st Shift (7:00 AM – 3:30 PM) Pay Rate: 75.56 per hour Turn Innovation into Reality on the Production Floor PDS Tech Commercial is partnering with a leader in the aerospace industry to hire a driven Manufacturing Engineer. In this role, you’ll bridge the gap between design and production—developing smarter processes, improving efficiency, and ensuring high-quality manufacturing outcomes in a fast-paced, highly regulated environment. If you’re passionate about solving complex problems and optimizing production systems, this is your opportunity to make a measurable impact. What You’ll Do As a Manufacturing Engineer, you will: • Define and solve technical challenges across manufacturing, assembly, and testing environments, • Drive cost-saving initiatives and continuous process improvements, • Collaborate with design engineering teams to enhance product manufacturability, • Develop production workflows and optimize sequencing of operations, • Prepare cost estimates and analyze production cost drivers, • Support facility layouts and equipment integration for manufacturing processes, • Design tools, fixtures, and gauges using SolidWorks or similar software, • Leverage 3D printing to create innovative fixtures and tooling solutions, • Develop detailed assembly work instructions and operator guides, • Program laser printing systems and create related process documentation, • Utilize RLPM tools to support New Product Introduction (NPI) and build plans, • Maintain production routers and bills of materials (BOMs), • Partner with quality teams and suppliers to resolve technical and quality issues, • Conduct compliance reviews to ensure adherence to customer and regulatory requirements, • Lead process optimization initiatives using PFMEA, control plans, SPC, and RCCA methodologies, • Bachelor’s degree in Engineering, • Proficiency with MS Office tools (Word, Excel, PowerPoint), • Experience in fast-paced and/or highly regulated aerospace or manufacturing environments, • Experience supporting machine operations, tooling/fixture design, and production processes, • Familiarity with CNC programming concepts and manufacturing workflows, • Strong analytical, organizational, and problem-solving skills, • Knowledge of PFMEA, SPC, RCCA, control plans, and configuration control practices, • Excellent communication and collaboration skills across cross-functional teams, • Ability to manage multiple priorities and lead initiatives independently, • This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Preferred Qualifications: • Experience in engineering, manufacturing, or production environments, • Proficiency with 3D modeling tools such as SolidWorks, • Familiarity with continuous improvement frameworks and lean methodologiesWhy Join Us, • Innovate at Scale: Play a key role in optimizing aerospace manufacturing processes, • Hands-On Impact: See your solutions implemented directly on the production floor, • Collaborative Culture: Work alongside engineering, quality, and operations experts, • Advanced Tools & Technology: Utilize modern tools including 3D printing and advanced manufacturing systems, • Career Growth: Expand your expertise in a high-demand, high-impact field Apply today and help shape the future of aerospace manufacturing. Pay Details: 75.56 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description Data is pivotal to our goal of frequent launch and rapid iteration. We’re recruiting a Data Engineer at iRocket to build pipelines, analytics, and tools that support propulsion test, launch operations, manufacturing, and vehicle performance. The Role • Design and build data pipelines for test stands, manufacturing machines, launch telemetry, and operations systems., • Develop dashboards, real-time monitoring, data-driven anomaly detection, performance trending, and predictive maintenance tools., • Work with engineers across propulsion, manufacturing, and operations to translate data-needs into data-products., • Maintain data architecture, ETL processes, cloud/edge-data systems, and analytics tooling., • Bachelor’s degree in Computer Science, Data Engineering, or related technical field., • 2+ years of experience building data pipelines, ETL/ELT workflows, and analytics systems., • Proficient in Python, SQL, cloud data platforms (AWS, GCP, Azure), streaming/real-time analytics, and dashboarding (e.g., Tableau, PowerBI)., • Strong ability to work cross-functionally and deliver data-products to engineering and operations teams., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building both the space hardware and the ground / facility infrastructure needed to support frequent launches and mission operations. We are seeking an IT Specialist/Systems Administrator to support and grow our internal systems, networks, and infrastructure. This role will be key in ensuring reliable, secure, and scalable IT operations across the company. The Role • Maintain, support, and monitor internal IT systems (servers, workstations, network, cloud services, backups), • Plan and implement infrastructure upgrades, patches, and system improvements, • Administer identity and access management, permissions, and directory services, • Troubleshoot hardware, software, and network issues; provide helpdesk support, • Ensure cybersecurity best practices, security monitoring, and incident response, • Document IT architecture, policies, procedures, and system configurations, • Coordinate with external vendors, service providers, and contractors, • Support onboarding/offboarding of employees with IT provisioning Requirements • Bachelor’s degree in Information Technology, Computer Science or related field (or equivalent experience), • 3+ years of experience as a systems administrator, IT engineer, or similar role, • Experience managing Windows, macOS, and Linux environments, • Hands-on experience with networking (firewalls, VPN, switches, routing), • Familiarity with cloud platforms (AWS, Azure, GCP) and hybrid infrastructure, • Strong security mindset: experience with endpoint security, access controls, monitoring tools, • Ability to document, communicate, and collaborate with technical and non-technical stakeholders, • Proven ability to multitask, respond to urgent issues, and work in a fast-paced environment Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Title: Architectural Millwork Engineer Location: Long Island, NY Industry: Architectural Woodwork / Millwork (not residential cabinetry or fixtures) Description: We are seeking an experienced Millwork Engineer to join our team in a fast-paced, fully automated architectural millwork environment. The ideal candidate is a highly skilled professional with extensive experience in Microvellum and a deep understanding of custom architectural woodworking fabrication. Precision, efficiency, and familiarity with automated manufacturing processes are essential. Responsibilities: * Develop and prepare detailed engineering and shop drawings using Microvellum (AutoCAD-based). * Interface directly with CNC fabrication equipment; ensure drawings are optimized for production through Microvellum workflows. * Translate architectural and design intent into accurate, buildable millwork components. * Collaborate closely with project managers, production teams, and installers to maintain accuracy and production efficiency. * Work within a fully automated shop environment supporting high-end, custom architectural projects. * Maintain strict quality standards—errors in programming or design have significant production impact. Requirements: * Minimum 10 years of experience in architectural millwork engineering or related fields. * Expert-level proficiency in Microvellum—must already be fluent; this position is not for candidates transitioning from AutoCAD. * Strong understanding of custom woodwork fabrication and construction methods. * Ability to manage multiple projects and priorities in a fast-paced production environment. * Preference for candidates local to Long Island, NY – relocation is not available. * Exceptional attention to detail, problem-solving ability, and technical accuracy. Benefits: * Comprehensive medical, dental, and vision coverage * 401(k) with 20% employer match * Paid vacation, sick, and personal days * Merit-based bonuses * Transportation reimbursement for NYC-based projects Contact:Phone: 605.210.5066Email: Equal Opportunity Employer: We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionSalary: Anticipated $150,000+ This position is a hands-on, office-based role in Bohemia, NY. We kindly ask that staffing agencies and third-party recruiters do not contact us regarding this position. Unsolicited resumes or candidate submissions will not be accepted, and Citnalta will not be responsible for any fees associated with such submissions. Company Overview At Citnalta Construction Corp., we build more than just structures - we build lasting relationships and stronger communities. Over the past 50 years we've grown into a leading Design Builder and General Contractor in the NY Metro area. By putting people first, we prioritize safety, sustainability, and high-quality projects, upholding integrity and ensuring responsibility in everything we do - now and for the future. About the Job We are seeking a motivated and detail-oriented Estimator / Engineer to join our team. In this role, youll take ownership of estimating and preconstruction activities for a variety of projects, from early design through bid submission. You will be responsible for preparing detailed quantity takeoffs, developing cost estimates, analyzing drawings and specifications, and coordinating with internal teams, subcontractors, and suppliers to ensure accurate and timely project deliverables. You will be responsible to help develop technical proposals and schedules. You will play a critical role in bridging estimating, engineering, and field operations helping to translate conceptual designs into constructible, cost-effective solutions. This position is ideal for professionals ready to advance beyond entry-level work, with a solid foundation in construction and a growing ability to manage portions of bids and preconstruction tasks independently. Qualifications • Bachelors degree in Engineering or Construction Management (Engineering preferred)., • 58+ years of experience in construction estimating, project engineering, or preconstruction., • Strong understanding of construction means, methods, and materials., • Experience with Bluebeam, CADD software, and estimating tools such HeavyBid, or equivalent platforms., • Proficient in Microsoft Excel and Word; strong analytical and organizational skills., • Ability to work independently while collaborating effectively within a team environment., • Excellent written and verbal communication skills., • Willingness to travel to project sites as needed. You'll Thrive with Us if You Are • Driven by a desire for continuous learning and personal growth, always striving to improve., • Able to take the initiative and work harmoniously with others, • Committed to embodying Citnalta's values of integrity, professionalism, and inclusion in everything you do. What You'll Love About Working with Us • Work on exciting, impactful projects that push boundaries and shape the future of construction and infrastructure., • Hands-on training and mentorship from senior staff, • Opportunity for growth in both engineering and estimating tracks, • Employer Paid Medical, Dental, and Vision Insurance, • Employer Funded HRA, • 401(k), • Paid Holidays, • Paid Time Off, • Tuition Reimbursement At Citnalta, we are committed to fostering a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants, and make all employment decisions, including hiring, compensation, promotion, benefits, training, and termination, without regard to race, color, age, sex (including pregnancy, sexual orientation and gender identity), national origin, ancestry, religion, disability, military or veteran status, marital status, genetic information, arrest or conviction record, or any other characteristic protected under federal, state, or local law.

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building the infrastructure—both in orbit and on the ground—needed to support frequent launches and mission operations. The Role: We are seeking a Construction Project Engineer to lead and support the development of iRocket’s factory, test, and facility infrastructure. This role will play a key role enabling our production and test operations by implementing facility projects, collaborating with contractors, and coordinating with internal stakeholders. • Support all aspects of project implementation from planning through execution, • Create scopes of work, obtain competitive bids, and oversee contractor selection, • Conduct job walk-downs and interface with vendors, engineers, and internal teams, • Review technical plans, drawings, and specifications to ensure alignment with project goals, • Monitor project schedule, budget, and deliverables, • Respond to scope, schedule, or deliverable questions from stakeholders, • Manage and maintain all project documentation (RFIs, submittals, change orders, etc.), • Bachelor’s degree in Engineering, Construction Management, Architecture, or related field, • Ability to read and interpret technical drawings, plans, and specifications, • Experience in facilities, infrastructure, or industrial construction in aerospace or high-reliability sectors, • Strong computer and software skills (project scheduling, documentation, collaboration tools), • Excellent verbal and written communication skills with internal teams, vendors, and contractors, • Aptitude for problem-solving, balancing scope, cost, and schedule Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Introduction Are you a technically curious problem solver who enjoys building systems that eliminate manual work and unlock the power of automation? We’re looking for an n8n Workflow Engineer to design and deploy sophisticated automation pipelines that connect AI models, internal IT systems, and LegalTech platforms. In this role, you’ll transform complex manual processes into secure, scalable workflows by leveraging APIs, scripting, and modern AI capabilities—helping our organization operate smarter, faster, and more efficiently. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Workflow Architecture: Design, deploy, and manage advanced n8n workflows connecting multiple platforms, databases, and APIs., • AI Integration: API connect Large Language Models (LLMs) and AI agents into workflows for document parsing, legal data extraction, and automated decision-routing., • API Management: Establish secure connections using Azure Graph, REST APIs, GraphQL, webhooks, and OAuth2 with Legal and IT SaaS products., • Custom Logic: Write specialized logic using JavaScript/TypeScript to process complex data payloads or interact with unique internal APIs., • Compliance & Security: Ensure all automations adhere to strict data privacy regulations, maintaining secure handling of sensitive legal and IT data., • Demonstrated experience building, deploying, and maintaining production-level workflows in n8n., • Strong proficiency in Scripting for writing functions and data transformations., • Deep understanding of API architectures, JSON, HTTP requests, and secure authentication methods., • Hands-on experience integrating AI APIs into functional business processes., • Experience with scripting, databases and Retrieval-Augmented Generation (RAG) pipelines., • Familiarity with specific LegalTech platforms or IT Service Management systems. 0ipTQKjWGh

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical and/or Computer Engineering, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Demonstrated ability to write firmware for industrial control equipment, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

We provide ongoing training and reward outstanding effort and results.Greet and welcome all customers coming into the dealership with a friendly attitude and uncover their needs.Answer phones, direct consumers to the proper department, and follow up promptly.Handle customer complaints diplomatically

CM engineers also regularly team with vendor engineers to develop improved and more efficient manufacturing processes with a focus on improved manufacturing margin, improved performance, reduced cost, and/or reduced span. Required Combination of Knowledge and Skill Bachelors degree from an accredite

Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education. One Medical is an equal opportunity employer, and we encourage qualified applicants of every background, ability, and life experience to contact us about appropriate employment opportunities. One Medical

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related

Continuing Medical Education (CME) - Receive an annual stipend for continuing medical education. State licensed in New York, obtained by your One Medical start date. One Medical providers also demonstrate:.

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

Bachelor's degree in Engineering, Quality, or a related field preferred. FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. The Senior Quality Engineer is responsible

Bachelor's degree in industrial, Manufacturing Engineering. Collaborate with design engineering teams to enhance manufacturability of products.

Bachelor's degree in Operations, Engineering, Supply Chain, or related field. Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan.

New York State Gov - Recreation & Historic Preservation Parks [Building Maintenance] As a Parks and Recreation Aide at the State of New York, you'll: Be responsible for general facility maintenance, customer service functions, and programming support; Maintain the park to ensure a clean and safe env

Collaborate with Engineers, Architects, Subcontractors, Vendors, etc.

Project Manager / Senior Project Manager – MTA Infrastructure Projects.NYC | On-Site | General Contractor.Forte Construction is seeking an experienced .Project Manager or Senior Project Manager with direct MTA project experience.If your skills, experience, and qualifications match those in this j

ALDI - 614 Middle Country Road - Responsibilities: Provide prompt and courteous customer service.Assist store management in achieving operational efficiency goals.Maintain store zones standards and merchandising standards at all times.Adhere to inventory procedures and product handling guidelines.Pe

Graduate of Medical Assistant program OR 2 years of Medical Assistant experience. GI procedures, all medical exams). Stock exam room/treatment rooms with medical supplies, linen, and designated chart forms.

Trinity Health - - Responsibilities: checking in/out patients; Insurance verification; Appointment scheduling; medical record maintenance; supply monitor/ordering.

Medical, dental and vision coverage (Available to employees and their families). Health Savings Account (HSA) with employer contribution and Flexible Spending Accounts (FSA) for medical, dependent, and transit expenses.

Previous medical office experience preferred. The Senior Registration Associate is responsible for performing and overall coordination of clerical duties related to the efficient and service-oriented operation of a medical practice. The Senior Registration Associate will perform all job functions in

We are seeking a friendly and organized Front Desk Receptionist to join our team.The ideal candidate will serve as the first point of contact, providing exceptional customer service while managing front desk operations.This role requires strong communication skills, attention to detail, and the abil

Work hours: M-F 9:00 AM - 5:00 PM.Responsibility: Office Assistant requiring clerical and customer service skills.Must be detailed oriented with knowledge of computers and general office equipment.Small, Woman, and Minority-Owned business.

VillageMD - - Responsibilities: Greet and welcome patients; Organize and coordinate patient intake and appointments; Enter/update patient information in system; Answer phone calls and inquiries in a prompt and polite manner; Process medical insurance information and verify eligibility.

Administrative Support Position.Performs diversified secretarial duties supporting management and/or a physician.Performs diversified secretarial duties including, but not limited to:.Typing various forms of correspondence.Scheduling appointments, meetings, etc.Transmitting various documents using c

We are looking for a receptionist to join our growing team! The right candidate will have strong communication skills and the ability to handle a flexible schedule.The day-to-day responsibilities will include answering the dealership phone, greeting customers, and assisting in scheduling sale appoin