Trabajos oil industry en Passaic, New JerseyCrear alertas

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description SHOP WELDER / FABRICATOR Special Event Fabrication company seeks shop welders with 2+ year's experience to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Metal Shop Foreman, candidates for should possess solid metal working skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experienced Welders/Fabricators should be well versed in aluminum and steel MIG welding. TIG welding knowledge and ability to read CAD drawings is a plus. ESSENTIAL – REQUIRED SKILLS 1. Perform MIG welding on various steel and aluminum profiles such as box tube, pipe, flat bar etc., 2. Use proper cutting and drilling technique prior to assembly, 3. Understanding of common framing layout and using jigs and clamps to make consistent and repeatable piece, 4. Read and interpret technical drawings, 5. Operate and maintain welding equipment and tools effectively, 6. Collaborate with team members to complete custom fabrication projects on time, 7. Knowledge of proper use of various tools such as angle grinder, mill, chop saw etc., 8. Must have a basic understanding of rigging and safety, comfortable working while on aerial scissor lifts and ladders, 9. Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time, 10. Adhere to safety standards and proper handling of equipment and gear, 11. Ability to organize/prioritize and complete multiple tasks simultaneously on the job, 12. Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · Assembly of finished scenery using hand tools such as wrenches and drills · Knowledge of basic carpentry is a plus but not required · Understanding what kind of maintenance each machine requires, using oil to keep machines from rusting and keeping an eye on any tool for wear · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager SAFETY RESPONSIBILITIES To ensure all jobs are set and follow all OSHA and KadaN Standards -Hourly Position with possibility of overtime when necessary. Please note - screenshot resume's will not be accepted Please submit your resume, portfolio and a brief cover letter detailing your experience in scenic painting. Company DescriptionFounded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Who We Are: Eastern Controls is a family-owned manufacturer’s representative located in the suburbs of Philadelphia, PA that provides the best-in-class process control solutions, service and training. We collaborate with customers in the Life Sciences, Power, Water & Wastewater, Chemical, Refinery, Food & Beverage, and other process-centered industries across an expanding map of geographies. We’re expanding rapidly, technically challenging, and pride ourselves on providing an unrivalled customer experience. If you enjoy a fun, fast-paced company that directly impacts life-sustaining industries and the industrial infrastructure of the United States, apply today. Who We’re Seeking: People would describe you as passionate, driven, energetic, AND technically minded. Must have a strong work ethic, coupled with the ability to influence others, drive sales and serve as the trusted advisor to your customers to solve their biggest engineering challenges. We’re seeking a “hunter” who can grow their given territory significantly while maintaining great relationships with customers and the manufacturers we represent. Strong technical communications skills and organization are critical; you can explain how something works, how it will solve a problem and/or work within a manufacturing process. Managing your schedule, book of business, calls and emails from customers is second nature to you. You love being in front of the customer and aren’t afraid to go the extra mile to get your foot in the door, hand-deliver an order, or help in a pinch. Education: Bachelor’s degree in business/engineering/ or technical degree preferred. Industrial automation or process industry experience preferred. We sell, service and support process control products to engineers/technicians in industrial applications; technical sales experience, analytical aptitude and curiosity are essential to the role. Experience: While we are open to a new/recent graduate who could be trained, we prefer someone who has a passion for process applications within industries of power, oil/gas, chemical, water / wastewater treatment, food & beverage production, pharmaceutical, pulp & paper, and other life-sustaining manufacturing facilities. Candidates must possess an enthusiasm for the types of products we sell and service (process measurement instrumentation, controls valves, actuators, positioners, gas & flame detection and electrical heat trace) and show clear evidence of personal success in growing/building a business (or similar endeavor). Requirements Cultural Fit: Family founded and owned since 1969, Eastern Controls is rooted in strong relationships, technical expertise, and a positive mindset. We work hard, have fun, and treat one another with respect and kindness. Our growth goals aim to serve the myriad of life-sustaining applications we touch, the dedicated customers and manufacturers we partner with, and the employees we call family. Area of Coverage: Northern New Jersey Location: Ideal candidate will live in the sales territory Northern/Central New Jersey, or Eastern PA (I-78/I-80 Access) Travel / Office: Candidate would work out of their home office with local travel to existing customers and building relationships with new customers throughout the territory. Occasional overnight travel required for training and meetings. Initially would need to spend significant time at our headquarters in Edgemont, PA (southwest of Philadelphia) for training and immersion on the product lines. Typically visit the ECI office as needed for additional sales meetings / training. Position Start Date: Immediately Job Category: Sales Job Type: Full Time Job Location: Remote within sales territory (HQ, + designated sales territory) Eastern Controls is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants or employees on the basis of age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law.

Does everything you touch turn green? If so, then GTI is looking for you! As a Cultivation Technician you will provide the expert care and maintenance needed to grow healthy, strong cannabis plants, and be responsible for all aspects of plant growth. Our ideal candidate is a self-motivated, positive individual who can think of no better way to spend the workday than potting, pruning, and tending to the health of our cannabis plants with the utmost care and precision. Cannabis is a heavily regulated industry; therefore, all employees are required to follow safety and compliance regulations. • Plant Life, • Topping plants, • Bottoming plants, • Transplanting & Defoliating, • Tending to grow types of media, • Scouting for disease or potential insects, • Training plants, • Adhere to national grow model and standards, • Harvest: (smaller cites), • Prepare room for harvest, • Harvest/ take down plants, • Defoliate and break plants into smaller pieces, • Hang plants on dry rack, • Clean both dry and flower rooms in between harvests, • Sanitation:, • Sweeping, mopping and all other required cleaning, • Cleaning of the plant housing devices, • Maintenance and cleaning of the plant tables, • Maintenance of the plant pots, • Reporting any issues to management to ensure a timely fix, • Be aware of hazards in the workspace, • Retain and understand department specific training, • Report safety incidents/ concerns and comply with follow-up actions, • Be compliant with area safety requirements, state regulations and PPE requirements, • Follow GMP, biosecurity, sanitation or other quality and compliance requirements, • Perform record keeping accurately and completely as directed by a lead or supervisor, • Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor, • Report and escalate safety & quality concerns, • While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions, • Must be able to sit and/or stand for extended periods of time while maintaining focus, • Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product, • Must be able to work in an environment that is 85+ degrees and 70% humidity for extended periods, • Ability to work in a fast-paced, changing, and challenging environment., • Must be able and willing to work at heights 6ft-8ft high using catwalk platforms, ladders, platform ladders, and scaffolds., • Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil)., • Minimum of a high school diploma or GED; Associate degree or certifications preferred, • Prior cannabis experience not required., • Must be a minimum of 21 years of age, • Must possess valid state ID

The Harvest Technician supports post-cultivation activities and operations of our cultivation department. This position will be responsible for preparing and processing harvests for flower sales and oil extraction. Our ideal candidate is a self-motivated, positive individual who can think of no better way to spend the workday than harvesting our cannabis plants with expert care and precision. Cannabis is a heavily regulated industry, therefore requires all employees comply to safety and compliance regulations. • Participate in cannabis harvest process including harvesting plants, sanitizing flower rooms in preparation for next grow, reloading flower rooms, and handling materials and cannabis waste., • Properly drying wet cannabis plants, • Accurately weigh and record post-harvest materials, • Follow all SOPs, verbal directives, training information and policies when performing duties, • Be aware of hazards in the workspace, • Retain and understand department specific training, • Report safety incidents/ concerns and comply with follow-up actions, • Be compliant with area safety requirements, state regulations and PPE requirements, • Follow GMP, biosecurity, sanitation or other quality and compliance requirements, • Perform record keeping accurately and completely as directed by a lead or supervisor, • Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor, • Report and escalate safety & quality concerns, • While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions, • Must be able to sit and/or stand for extended periods of time while maintaining focus, • Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product, • Must be able to work in an environment that is up to 85+ degrees and up to 70% humidity for extended periods, • Must be able to work at heights, • Ability to work in a fast-paced, changing and challenging environment, • Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil)., • Minimum of a high school diploma or GED; degree or certifications preferred, • Effective time-management skills and ability to multi-task, • Ability to work well with others while also completing individually assigned tasks, • Ability to work in a fast-paced, changing, and challenging environment, • Prior cannabis experience not required, • Must be a minimum of 21 years of age, • Must possess valid state ID

Yellowstone Local is proud to represent Hamilton Mechanical, LLC, a Hickory Company, an industry leader in high-end residential HVAC across New Jersey. Tired of being just another voice on the phone? At HamiltonAir, you’re the nerve center of a mission-driven, high-performance HVAC team. * Compensation: Earn $50,000 - $75,000 per year, plus 10% commission on new memberships or upgrades. * Overtime Opportunities: Boost your income with consistent overtime. * Full Benefits: Medical, dental, vision, 401(k) with company match, paid vacation, sick leave, and holidays. * Career Stability & Growth: Full-time position with advancement pathways in a fast-growing company. * Strong Team Culture: Work with a supportive, high-performance crew where your voice and ideas are valued. * Mission-Driven Momentum: Be part of the Northeast’s leading clean heat installation and service team. * Company Values You Can Believe In: * Put Employees First * Treat Everyone with Respect * Delight Customers * Raise the Bar * Get Things Done * High-Impact Work: Contribute to meaningful projects, from geothermal installs to traditional gas and oil furnace systems. As the Customer Service Specialist - Skilled Trades based in New Jersey, you’ll keep our operations running like clockwork while creating top-tier experiences for our customers. From coordinating technician schedules to driving membership sales, you’ll be the communication hub of our high-performing team. Customer Support * Answer incoming and outgoing calls with professionalism and precision. * Provide clear pricing, schedule details, and proactive follow-up. * Handle invoicing and nurture strong customer relationships. Scheduling and Dispatch * Route technicians strategically for maximum efficiency. * Maintain customer and service records using ServiceTitan. * Track workflow and GPS data to ensure accuracy and timeliness. Membership Sales * Actively promote and sell memberships or renewals. * Schedule and manage seasonal service visits. * Follow up with existing members to ensure satisfaction. Process Optimization * Identify operational bottlenecks and suggest solutions. * Coach technicians on using new tools and improving system use. Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. * Strong communication and multitasking abilities. * Technologically proficient with strong organizational skills. * Self-starter with a results-driven attitude. * Valid driver’s license. * Associate’s degree or relevant work experience. * Minimum 1 year in customer service. * Experience in trades such as HVAC, solar, or clean energy. Hamilton Mechanical, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative, inclusive environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician IV Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. We are currently hiring for the Day Shift 7:00am-3:00pm, Monday - Friday. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control. Tracking and trending operational characteristics. Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outages Manage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage Build-OutsOverhead InstallationsRack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8 Guiding Principles. Requirements Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check, including criminal history, personal references, employment and education verifications, and Department of Motor Vehicle and credit check. Physical Demands and special requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $47.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Job Title: Engineer (Mechanical/Electrical/Computer) Location: Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a highly skilled Engineer with expertise in mechanical, electrical, or computer systems to support critical tasks for naval and maritime operations. This role involves conducting detailed technical reviews, project management, and engineering support to ensure the accuracy, functionality, and quality of ship systems and installations. Key Responsibilities: \n • Provide engineering support for Air Conditioning and Refrigeration (AC&R), Steam, Auxiliary, Combat Support, Life Support and Ventilation, and/or Compressed Air Systems.\n, • Provide programmatic, engineering/technical support, test procedure development, testing, and onsite coordination support for programs, including Machine Alterations (MACHALTs), engineering change proposals. and/or ship change documents (SCDs).\n, • Provide market research, engineering support, and recommendations to resolve obsolescence issues.\n, • Provide Ship system configuration, testing, training, support, troubleshooting, and assessments of HM&E systems.\n, • Conduct pre- and post-installation ship checks to verify installation drawing accuracy.\n, • Support Integrated Logistics Support (ILS) development, certification packages for MACHALTs, and/or SCDs.\n, • Develop and track Plan of Action, and Milestones (POAMs) for related programs and projects.\n, • Provide strategic planning and analysis of requirements to assist in developing a fully Integrated Master Schedule (IMS).\n, • Actively participate in the NSWCPD System Engineering Program (SEP), which includes attending meetings; completing action items; participating on sub teams, and participating in training, and assessments. Provide support for Systems Engineering Plan tools and processes.\n, • Ensure proper equipment and logistic configurations for technical accuracy.\n, • Perform Technical Assessment Team (TAT) reviews to ensure the delivery of quality products to the Fleet. \n, • Develop and present fully automated advanced fluid system models using industry-standard software. \n, • Analyze the impacts of potential ship alterations or modifications to existing shipboard systems.\n\n Experience and Skills Requirements: \n • Bachelor's degree in any engineering discipline from an accredited college or university.\n, • Seven (7) years of experience in: Navy Ship Auxiliary systems, including distributed machinery\n, • control systems and software; Auxiliary Fuel, and Lube Oil systems; Auxiliary Pumps, and Smart Valves; Auxiliary Machinery, and the testing of these systems.\n, • Knowledge of NSWCPD System Engineering Program (SEP), Alterations (MACHALTs), engineering change proposals, and/or ship change documents (SCDs) processes.\n, • Experience with Integrated Logistics Support (ILS) development and obsolescence management.\n, • Proficiency in interpreting technical drawings and schematics.\n, • Experience in project management, engineering support, and system configuration.\n, • Knowledge and experience with naval ship systems including fuel and lube oil, pumps, heat exchangers, smart valves, auxiliary machinery and the testing of these systems.\n, • Must have the ability to obtain a SECRET clearance.\n Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer - minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Restaurant Technologies is the leading provider of highly innovative and value-enhancing bulk cooking oil management services to the food service industry. Our solution is environmentally sound, highly efficient and creates a safer, more productive work environment for restaurant personnel. What's i

Job Description We are seeking an ambitious, high-performing professional who thrives on building meaningful client relationships, driving business growth, and ensuring exceptional service delivery. This role combines strategic client management with proactive business development to expand T&M’s presence across North America. The ideal candidate is both a trusted client advocate and a strategic partner—focused on retention, growth, and long-term success for both our clients and the company. T&M is headquartered in the Northeast region, with offices strategically located throughout the country. This position can be located in proximity to any of our regional offices – NJ, PA, OH or IN. Key Responsibilities: • Client Relationship Management: Serve as the primary point of contact for assigned clients, ensuring smooth onboarding, timely communication, and a consistent, high-quality client experience., • Retention & Growth: Develop and execute strategies to strengthen client relationships, increase retention, minimize churn, and identify opportunities for cross-selling and upselling across T&M’s full suite of services., • Strategic Oversight: Oversee delivery of services to ensure satisfaction, quality, and alignment with client expectations. Collaborate with internal teams to ensure tasks are completed effectively and client commitments are met., • Client Advocacy & Engagement: Act as an advocate for client needs while balancing company objectives. Proactively address and resolve issues, ensuring both client satisfaction and operational efficiency., • Business Development: Identify and pursue new business opportunities through prospecting, networking, and industry engagement. Leverage existing relationships in Oil & Gas, Industrial Manufacturing, and Chemical Manufacturing sectors to drive regional growth., • KPI Management: Monitor and report on key performance indicators such as client retention rate, booked new business, net revenue growth, cross-selling activity, and direct labor multiplier to ensure alignment with company goals., • Strategic Planning: Play a key role in client selection, engagement decisions, and management assignments. Collaborate with leadership to align account strategies with broader business objectives., • Cross-Functional Collaboration: Partner with internal technical, operational, and sales teams to deliver tailored, high-value solutions that meet regulatory standards (RCRA, OSHA, environmental compliance)., • 15–20 years of private-sector experience in client management, business development, or sales, preferably within industrial or environmental sectors., • Proven success in maintaining and expanding long-term client relationships., • Strong negotiation, communication, and diplomacy skills to balance client advocacy with organizational goals., • Demonstrated ability to monitor and achieve key performance metrics., • Existing, verifiable relationships within industrial markets highly preferred., • Proficient in CRM tools, pipeline management, and performance reporting., • Willingness to travel regionally (including overnight) to meet with clients and attend industry events. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $160,000 and $192,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources, • Bonus based on performance Reports To: Shop Manager Position Summary: The CNC Machine Operator 1 is responsible for the operation of the CNC equipment including lathes and mills. The job involves repetitive tasks, and employees may be required to monitor multiple machines.. Typical job duties include, loading materials into the machine, monitoring machine operation during use, machine maintenance, deburring, and inspecting machined parts. This role will also require simple maintenance tasks such as changing coolant and oil. An individual in this role is expected to be cross-trained to operate multiple machining centers and/or to perform functions in other departments as required. Essential Functions: • Basic understanding of CNC machining, including setup procedure, operation, and quality requirements., • Basic understanding of reading and interpreting manufacturing drawings and production documentation., • Math competency required. Ability to simple perform calculations required for machine setup and adjustments to maintain required dimensions., • Basic understanding of measurement equipment including calipers, micrometers, and other instruments needed to conduct inspection of work product., • Understand and follow all Company and OSHA safety procedures., • Maintain a well-organized, safe and clean work area at all times., • Conduct and document preventative maintenance on the machines., • Maintain standards of quality during production., • Able to stand for more than 4 hours at a time., • Able to lift 50 lbs. or more., • Work a minimum of 40 hours per week and overtime as assigned., • Follow all safety guidelines as outlined in the company safety manual., • High School diploma or GED required, • CNC machining and/or manufacturing industry experience preferred., • Experience with Haas, Doosan, and Fadal controls is a plus, • Proficiency with the Microsoft Office Suite is a plus, • Impeccable attention to detail, • An analytical mind with good math skills, • Great communication and interpersonal abilities, • Must be reliable and trustworthy, • Collaborate with warehouse employees and other staff to ensure business goals are met

Job DescriptionDescription: AAF International offers the most comprehensive clean air solutions available across the globe. Selling under the American Air Filter® and the AAF International® brand names, AAF International has been an industry pioneer since 1921 with manufacturing operations in 22 countries and over 6000 employees globally. Our products are the industry benchmarks for quality and performance. Our applications include commercial, industrial and residential solutions from the filters used in your home to the most critical cleanroom and power generation applications. We are a member of the Daikin Group, the world's largest air conditioning provider with $30 billion in revenue and over 98,000 employees worldwide. Founded in 1924, Daikin has grown into a diversified industrial manufacturing company offering solutions in clean, air, air conditioning, refrigeration, chemicals, oil hydraulics, defense systems and electronics. Our culture of continuous improvement, safety and world class operations is driven by our people-centered management philosophy. This philosophy is built around mutual selection: that while AAF seeks top talent people to join and deliver on our team, we also want each team member to receive job satisfaction, growth & development, and continued happiness in being a long-term member of the AAF family. This is fueled by our belief in treating our people, our supply partners, our customers and our environment with the trust and respect we each require, and our passion to give back to our community for our success. Read more about our philosophy at: AAF International is an Equal Opportunity Employer M/F/Disability/Veteran. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, citizenship, veteran status, uniform servicemember status, age, disability or any other legally recognized protected personal characteristics. Position Objective: This position will report to the regional branch in New Jersey and work out of their home, ideally located in the territory. The territory for this position covers Nassau and Suffolk counties and the outer boroughs of Queens, Brooklyn, Bronx and Staten Island. Achieves maximum sales profitability, growth and account penetration within an assigned territory and/or market segment by effectively selling the Company’s products. Contacts and secures current and new business accounts/customers. Key Accountabilities: • Promotes/sells/secures orders from existing and prospective customers through a relationship-based sales approach highlighting the advantages/value proposition., • Demonstrates products to existing and potential customers and assists them in selecting those best suited to their needs., • Manages sales goals - profit and budget expenses., • Establishes, develops and maintains business relationships with current customers and prospective customers in the assigned territory/market segment to maintain current and generate new business., • Researches sources for developing prospective customers and for information to determine their potential., • Develops clear and effective written proposals and quotations for current and prospective customers., • Expedites the resolution of customer problems and complaints., • Coordinates sales effort with marketing, sales management, accounting, logistics and technical services., • Analyzes the territory/market’s potential and determines the value of existing and prospective customers to the Company., • Creates and manages a customer value plan for existing customers highlighting sales profile, share and value opportunities., • Provides management with detailed information on customer needs, problems, interests, competitive activities, and potential for new products., • Stays current with product applications, technical services, market conditions, competitive activities, and marketing trends and activities., • Participates in trade shows and conventions as required., • Perform other related duties as assigned as required. Requirements: Position Requirements: • Bachelor’s degree from an accredited university in Business or related field preferred;, • 5+ years' prior selling experience;, • Understanding and experience with high value-added product selling, pricing, and negotiation;, • Experience selling to healthcare and pharmaceutical facilities a plus;, • Ability to communicate a technical concept or value added benefit to achieve buy-in from diverse teams to meet sales targets and profitability;, • A history of consistently delivering on expectations for growth and profitability must be demonstrated;, • A team player that possesses a natural way of influencing, both internally and externally;, • A self-starter with a creative eye to implement marketing and promotional campaigns designed to achieve specific growth objectives regionally and nationally;, • Must be proficient in Microsoft Office (Word, Excel, PowerPoint);, • SAP or CRM experience, Salesforce preferred.

Job Description About: Collins Building Services (CBS) is proud to be a leading firm in facility management throughout the New York Tri-State area for over 30 years. Clients choose us for our commitments of superior quality service, transparency, and innovation, tailored to their individual needs. With over 3,200 employees, Collins Building Services’ operations team is responsible for providing the excellent service that has been recognized throughout the industry. This is a unique opportunity to join an established company that is investing in constant innovation, turning customer feedback into actionable insights for business success and solutions. If you want to work for a company that’s focused on providing you the best experience with a continued focus on your personal growth and development – join the CBS Operations Team! Job Description Summary This position is responsible for controlling and maintaining in a safe and clean environment the operation of low-pressure steam boilers that provide heating and domestic hot water needs within the campus buildings and assigned properties/facilities. Job Description: The Boiler Operator is responsible for the proper operation and the overall maintenance of boilers and all associated equipment. In this role they are responsible for the following: • Keep current on all New Jersey Administrative Code updates., • Maintain State required daily logs of operation, maintenance, repair, and safety activities including but not limited to test results, instrument readings, details of equipment malfunctions, preventive maintenance tasks, maintenance/repair work orders, complete shift check list., • Operates and monitors all boilers and support systems. Assures that boilers, support systems and related equipment are operating properly. Makes connections, adjustments and/or repairs as necessary., • Operates, maintains, and repairs valves, water and oil pumps, burners, controls, alarms, and coils (steam/hot water), filters, heat exchangers and plumbing., • Test boiler water quality and/or arrange for testing. Take necessary corrective action such as adding chemicals to prevent corrosion and harmful deposits per the Chief Engineers direction., • Utilize the computer maintenance management system (work order) for repair requests and preventative maintenance logs., • Trouble shoot problems, activate valves to maintain required amounts of water in boilers, adjust supplies of combustion air as well as the flow of fuel to the burners. Monitor boiler controls, safety switch valves, gauges, burners, alarms, to detect leaks or malfunctions to ensure that the boilers, related equipment and systems are operating efficiently and safely., • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Performs minor maintenance area work as needed, including but not limited to carpentry, painting, construction/renovation of facilities, furniture, and fixtures., • Assists in emergencies as part of the Maintenance Department team., • Must be a certified New Jersey state licensed boiler operator, minimum of a low-pressure black seal., • High School Diploma or equivalent., • 3-5 years working experience in similar boiler plant operation. Have a working knowledge of the State of New Jersey Administrative CODE (NJAC) 12:90 boiler, pressure vessels, and refrigeration. • Intermediate computing skills including but not limited to MS Excel, MS-Office and Email systems., • Must be highly organized with great attention to detail and a high standard for accuracy., • Excellent English communication skills both written and verbal., • Strong analytical, organizational, and problem-solving skills., • Excellent leadership and interpersonal skills, with the ability to liaise positively with all levels of management and external contractors., • Strong project management skillset – ability to lead the planning and execution of projects, including preventive maintenance., • Ability to work independently, self-starter, energetic., • Able to work with a sense of urgency and work effectively under pressure., • Able to work overtime as needed, including evenings, weekends, and holidays., • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices., • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine., • Involves prolong periods of walking, movement between departments, floors, and properties to facilitate work., • Must be able to wear personal protective equipment (PPE) for prolonged periods of time., • Must be able to climb a ladder and work at heights for extended periods of time., • Ability to speak clearly so others can understand you., • Ability to read and understand information presented orally and in writing., • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics Collins Building Services provides equal employment opportunities to all employees and applicants. The Company does not discriminate in employment opportunities or practices on the basis of race, creed or religion, color, national origin, sex, age, disability or handicap, marital status, military or veteran status, sexual orientation, citizenship or citizenship status, or any other characteristic protected by federal, state, or local law. Company DescriptionAbout: Collins Building Services (CBS) is proud to be a leading firm in facility management throughout the New York Tri-State area for over 30 years. Clients choose us for our commitments of superior quality service, transparency, and innovation, tailored to their individual needs. With over 3,200 employees, Collins Building Services’ operations team is responsible for providing the excellent service that has been recognized throughout the industry. This is a unique opportunity to join an established company that is investing in constant innovation, turning customer feedback into actionable insights for business success and solutions. If you want to work for a company that’s focused on providing you the best experience with a continued focus on your personal growth and development – join the CBS Operations Team! Collins Building Services provides equal employment opportunities to all employees and applicants. The Company does not discriminate in employment opportunities or practices on the basis of race, creed or religion, color, national origin, sex, age, disability or handicap, marital status, military or veteran status, sexual orientation, citizenship or citizenship status, or any other characteristic protected by federal, state, or local law.About:\r\n\r\nCollins Building Services (CBS) is proud to be a leading firm in facility management throughout the New York Tri-State area for over 30 years. Clients choose us for our commitments of superior quality service, transparency, and innovation, tailored to their individual needs. With over 3,200 employees, Collins Building Services’ operations team is responsible for providing the excellent service that has been recognized throughout the industry.\r\n\r\nThis is a unique opportunity to join an established company that is investing in constant innovation, turning customer feedback into actionable insights for business success and solutions. If you want to work for a company that’s focused on providing you the best experience with a continued focus on your personal growth and development – join the CBS Operations Team!\r\n___________________________________________________________________\r\n\r\nCollins Building Services provides equal employment opportunities to all employees and applicants. The Company does not discriminate in employment opportunities or practices on the basis of race, creed or religion, color, national origin, sex, age, disability or handicap, marital status, military or veteran status, sexual orientation, citizenship or citizenship status, or any other characteristic protected by federal, state, or local law.

Job DescriptionCompany Description MSX has been a trusted partner to leading vehicle manufacturers, their retailers, and mobility organizations globally for more than 30 years. Our unwavering commitment is to help our clients transform their businesses and effectively manage operations in the areas of: Sales Performance; Repair Optimization and Compliance; Parts and Accessories Sales Performance; and Consumer Engagement. With our global teams, industry expertise, and the power of technology, we design and deliver tailored, sustainable, and innovative solutions and services that help our clients optimize their operations and captivate their customers. Job Description Are you a high-energy leader who thrives on creating change? We are looking for a passionate individual to lead our Mobile Service program. This is not a traditional automotive role. You are a consultant, a sales coach, and a hands-on trainer rolled into one. You will be responsible for working with dealership owners to embrace the future of automotive service, coaching their management teams on profitability, and getting "hands-on" in our mobile units to show technicians how it’s done. If you have a passion for customer experience, consultative sales, or retail leadership, and you aren’t afraid to get your hands dirty, we want you. • 50% Business Growth & Sales: Consulting with Dealer Principals and Service Managers. You are "selling" the vision, overcoming objections, and building a profitable business model., • 25% Change Management: Implementing new processes, analyzing KPIs, and fixing "broken" dealership processes., • Serve as SME for Mobile Service implementation, sales, operations & workflow process mapping., • Deliver technical & non-technical training at dealerships, other venues within the assigned territory, and virtually. Training topics include new MS unit launch support, MS unit discovery, MS unit systems training, vehicle service & repair procedures, MS demand generation, inspection-based sales & customer satisfaction initiatives., • Instruct Technicians on proper vehicle lifting procedures, oil extraction/oil change procedure & vehicle checkup process, • Support and/or conduct other non-technical training., • Teach techniques for building rapport with customers, active listening, and conducting professional, high-integrity sales training to improve customer experience & increase MS department revenue., • Assist dealership management with the development and execution of dealership go to market plans., • Observe dealership process activity and provide root cause analysis/action planning/training to improve performance with proven ROI strategies., • Monitor all KPIs for all dealerships within the territory and provide counsel to dealership management in support of achieving stated sales targets., • Ensure robust parts stocking strategy to support MS operations., • Develop MS unit parts stocking plan to support planned repair as well as additional needed service opportunities., • Effectively observe and demonstrate Mobile Service procedures, requiring prolonged standing, walking, bending, crouching, kneeling, and crawling under vehicles or reaching into engine bays., • Conduct van discovery training, consisting of frequently moving parts, tools, and equipment often weighing 10-50 lbs., • Work in outdoor environments with varied temperatures & inclement weather alongside technicians., • Ability to travel 80% of the time (both driving and flying)Qualifications, • Passionate, resilient, and persuasive. Ability to talk to every level at the dealership and share best practices, • High School diploma (bachelor’s degree preferred), • Bachelor’s Degree, • 5+ years of experience in automotive industry. Service in an aftermarket or dealership environment is a plus. Retail automotive experience is a plus., • Must have a wide-ranging background in automotive industry with corporate and retail knowledge., • Knowledge of automotive service tools & equipment, • Ability to train Technicians on Mobile Service tools & equipment, • Understanding basic automotive systems to effectively communicate to technicians and Coordinators., • Knowledge of Automotive Service Sales Process & Techniques, • Ability to deliver sales training to MS Coordinators & Advisors, • Must have rich experience in automotive training and facilitation., • Knowledge of automotive parts operations, • Must have excellent written and verbal communication skills., • Proven record of accomplishment with program leadership., • Strong communication skills, both oral and written, • Strong analytical skills, • Strong problem-solving skills, • Exceptional collaboration and persuasion skills, • Strong initiative and motivation Additional Information MSX International is an Equal Employment Opportunity Employer committed to employing a diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veteran status, age, or any other characteristic protected by law.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionMECHANICS: SCORE THE HIGHEST-PAYING AUTO JOBS WITH CARGUYS INC! Where: Top Dealerships & Shops Nationwide Type: Full-Time, Industry-Leading Pay + Fat Bonuses Who: Rookie Techs to Master Mechanics – We Want YOU! Tired of lowball offers and dead-end gigs? CarGuys Inc. is the #1 recruiter hooking up Auto Mechanics (Technicians) with elite dealerships and repair shops that pay the HIGHEST WAGES IN THE INDUSTRY. We’re talking life-changing paychecks, cutting-edge shops, and jobs that make you stoked to grab your toolbox every day. Ready to level up? Let’s roll! Why CarGuys Inc. DELIVERS for Mechanics: TOP PAY, GUARANTEED: We ONLY partner with shops and dealers shelling out the highest wages, plus signing bonuses and performance cash to pad your pocket. ELITE SHOPS, YOUR STYLE: Work in high-tech bays with the latest tools, lifts, and diagnostics – from local hotshots to big-name chains. Imports, exotics, EVs, you name it! CAREER BOOST: Land gigs with paid training (EV, ADAS, ASE certs) and fast tracks to Lead Tech or Shop Foreman. We match your hustle to your dream role. YOUR JOB, YOUR TERMS: Our recruiters hand-pick shops that fit YOUR vibe – killer culture, short commutes, and respect for your skills. 100% FREE FOR YOU: Our service costs you NOTHING. Dealers pay us to find pros like you, so you just cash in on the best jobs. What You’ll Do: * Fix everything from oil changes to engine overhauls with pro-level precision. * Master cutting-edge diagnostics to solve problems like a boss. * Join teams that live for cars and crush it in high-energy shops. Who We Want: * Car Junkies: You eat, sleep, and breathe automotive. * Any Skill Level: From newbies with drive to ASE-certified legends. * Toolbox Warriors: Got your tools? Bring the heat. * Clean License: Valid driver’s license, clean record a plus. Mechanics RAVE About Us: “CarGuys Inc. got me a dealership gig with insane pay and EV training in DAYS. Best move I ever made!” – Tony, Master Tech “I was underpaid and overworked. CarGuys landed me a shop with a fat bonus and a crew that’s like family!” – Kayla, Auto Tech DON’T SLEEP ON THIS – YOUR BIG BREAK IS NOW! Why settle for less? Join the mechanics cashing in with CarGuys Inc. and lock in a job that pays you what you’re WORTH. Apply NOW! Skills:State Engine Repair Certification, State Engine Tune-up/Performance Certification, State Front End, Suspension & Steering Systems Certification, State Brakes & Braking Systems Certification, State Automatic Transmission Certification, State Manual Transmission, Front & Rear Drive Axles Certification, State Electrical Systems Certification, State Heating & Air Conditioning Certification, State Pre-1973 Vehicles Certification: over 10,000 pounds GVW, State Engine Repair - Gasoline Certification, State Engine Repair - Diesel Certification, State DriveTrain Certification, State Brakes & Braking Systems Certification, State Suspension & Steering Systems Certification, State Electrical Systems Repair Certification categories for other on-road vehicles are: State Collision-Related Mechanical Repair Certification, State Unitized Body Structural Repair Certification, State Motorcycle Repair Certification, State Recreational Trailer repair Certification: ASE Engine repair certification, Automatic transmission/transaxle certification, ASE Manual DriveTrain & Axles, ASE Suspension & Steering, ASE Brakes, ASE Electrical/Electronic Systems, ASE Heating and Air Conditioning, ASE Engine performance. Automotive mechanic, automotive technician, automotive service tech, automotive service technician, auto tech, auto mechanic, factory trained technicians, warranty repairs, certified pre-owned inspections, recall repairs, customer satisfaction surveys, CSI, express service, express technician. Express service lane You are applying through Car Guy’s Inc, America’s and Canada’s #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job DescriptionDirector of Marketing Company: Bono USA Inc Location: Montclair, NJ (Hybrid) Industry: Food & Beverage / Consumer Packaged Goods (CPG) Reports To: Chief Executive Officer Travel: ~20–30% (trade shows, retailers, distributors) Company Overview Bono USA Inc is the U.S. division of the Bono family of companies, Sicily’s largest and most awarded producer of extra virgin olive oil. The company imports and distributes premium Italian olive oils, olives, sauces, marmalades, and specialty foods throughout North America. Founded in 1934 in Sicily, the Bono brand is recognized for high-quality, traceable, and regionally sourced products with certifications including PDO/PGI, USDA Organic, Kosher, and Non-GMO. Bono USA is experiencing strong growth driven by rising consumer demand for authentic Mediterranean ingredients and premium specialty foods. The company distributes nationally through major retailers, specialty grocers, and e-commerce platforms and continues to expand its brand presence across the United States. Position Overview The Director of Marketing will lead the strategic development and execution of all marketing initiatives for Bono USA across retail, e-commerce, and food service channels. This individual will be responsible for brand strategy, demand generation, product marketing, digital marketing, trade marketing, and consumer engagement to accelerate growth in the U.S. market. The ideal candidate will be a hands-on marketing leader with prior food CPG experience, capable of building brand equity while supporting sales growth through retail, distributor, and omnichannel marketing initiatives. This role is hybrid and based in Montclair, NJ, working closely with the executive team, sales leadership, and international stakeholders. Key Responsibilities Brand & Strategic Marketing • Develop and execute the U.S. brand strategy for Bono’s portfolio of olive oils and specialty Italian foods., • Position the brand as a leader in premium Mediterranean and specialty food categories., • Lead annual marketing planning including brand positioning, messaging, and campaign strategy., • Identify opportunities for product innovation and portfolio expansion based on consumer insights and category trends.Demand Generation & Retail Marketing, • Create integrated marketing programs that drive retail sell-through and consumer awareness., • Partner with the Sales team to support key retail partners including natural, specialty, and conventional grocery chains., • Lead trade marketing programs, retailer promotions, and in-store marketing initiatives., • Support category reviews and retailer presentations with consumer insights and marketing strategy.Digital & Consumer Marketing, • Lead the company’s digital marketing strategy, including:, • Social media, • Influencer partnerships, • Paid digital campaigns, • SEO/SEM, • Email marketing, • Drive e-commerce growth through online retailers and direct-to-consumer initiatives., • Manage digital storytelling that highlights authenticity, traceability, and regional sourcing.Product Marketing & Launches, • Develop go-to-market strategies for new product launches., • Oversee packaging updates, brand storytelling, and product positioning., • Collaborate with product development and sourcing teams on innovation opportunities.Trade Shows & Industry Events, • Manage marketing presence at major industry events including:, • Specialty food trade shows, • Retail buyer events, • Culinary and Mediterranean food events, • Oversee booth strategy, promotional materials, and brand activation.Analytics & Performance, • Track and analyze key marketing KPIs including:, • Brand awareness, • Retail velocity, • Digital engagement, • ROI on campaigns, • Use data insights to optimize marketing spend and strategy.Team Leadership, • Build and lead the marketing team as the company scales., • Manage relationships with external agencies including PR, creative, and digital partners., • Partner closely with executive leadership to align marketing with overall business strategy.Qualifications Required • 8–12+ years of marketing experience in Food or Beverage CPG, • Proven experience building or scaling consumer brands in retail channels, • Experience with specialty food, premium grocery, natural foods, or Mediterranean categories, • Strong expertise in:, • Brand marketing, • Trade marketing, • Digital marketing, • Consumer insights, • Experience supporting national retail distribution and distributor networks, • Bachelor’s degree in marketing, Business, or related fieldPreferred, • Experience with olive oil, specialty foods, or imported food brands, • Experience working with natural/specialty retailers (Whole Foods, specialty grocers, etc.), • MBA or advanced marketing degree, • Experience in fast-growth or entrepreneurial CPG environmentsKey Competencies, • Strategic thinking with strong execution skills, • Brand storytelling and consumer marketing expertise, • Retail and trade marketing knowledge, • Data-driven decision making, • Entrepreneurial mindset, • Collaborative leadership styleCompensation & Benefits, • Competitive base salary + performance bonus, • Health, dental, and vision insurance, • Paid time off and holidays, • Hybrid work environment, • Opportunity to shape the growth of a premium international food brandWhy Join Bono USA, • Join a heritage Sicilian brand with nearly a century of history, • Be part of a fast-growing premium food company expanding in the U.S., • Work with authentic, high-quality Mediterranean products, • Lead the marketing strategy during a high-growth phase

Job Description Founded in 1968, HYTORC is the worldwide leader in industrial bolting solutions. Our mission is to optimize safety, quality and schedule, in industrial bolting through innovative solutions and an unyielding commitment to world class customer service. With over 55 years of experience focused entirely on developing new technologies for hydraulic, electric and pneumatic torque wrenches, while creating a worldwide 24/7 service network, HYTORC has become the most trusted name in the industry. Today HYTORC boasts a series of smart bolting systems that communicate with in-house developed apps for system control, data exchange, and software updates. We are proud to be recognized as the innovation leader in our industry, providing award winning solutions to leading businesses globally. Our customers are in various industries, not limited to Oil & Gas, Wind Power, Nuclear, Aerospace, Transportation including SpaceX, GE, NFL Stadiums, Boeing, Tesla and many more. General Purpose: The Compliance Manager is responsible for implementing and maintaining HYTORC’s Quality Management Systems, handling the day-to-day quality activities in our South Hackensack location, coordinating calibration activities globally and driving continuous improvement. Essential Duties and Responsibilities • Implementing, maintaining and driving continuous improvement of HYTORCS QMSs and accreditation’s, including ISO/IEC 17025, ISO 9001:2015, TUV, KHNP, AD2000, and ISO 80034 Ex Products System, for domestic and international locations., • Managing quality issues and customer complaints., • Facilitating root cause analysis, implementing problem appropriate corrective and preventive actions., • Conducting internal and supplier audits against appropriate standards and guidelines., • Hosting UL/ETL routine inspections and handling issues that arise., • Coordinating with Calibration Lab Managers on quality and equipment needs and issues., • Routinely auditing calibration activities for potential process deviations., • Developing and maintaining uncertainty budgets for the calibration laboratories., • Developing, monitoring, and maintaining repeatability and proficiency tests used for trend analysis., • Designing and evaluating standard operating procedures for calibration asset management software and uncertainty software for laboratory calibration standards and customer calibration events., • Assisting Engineering with the evaluation of new calibration methods and procedures., • Using statistical techniques to analyze and validate measurement standards and processes., • Ensuring that intermediate checks are performed on calibration standards,, • Authorizing short term extension of intervals on HYTORC standards when requested and to meet HYTORC needs based on valid reasons for interval extension or end of period reliability data., • Supervising the laboratory’s inter-laboratory proficiency testing program and ensuring it is maintained., • Providing training on all QMSs, including re-verification of all personnel as necessary to maintain confidence in tests and/or calibrations performed., • Providing leadership and guidance to the Quality and other departments., • Coordinating with HYTORC’s service department to support actions associated with customer feedback., • Compliance Team (2 Associates), • Additional resources may be added over time as we grow, and needs identified Education/Experience Required • Bachelors degree in a technical field or 8 plus yrs of related experience, • ISO/IEC 17025 (minimum of 5 years’ experience). Experience in calibration and metrology for force/torque and pressure., • ISO 9001:2015 (minimum of 5 years’ experience)., • Three years of experience supervising and managing personnel., • Must be able to understand and interpret statistical data and read drawings, • Excellent communication skills to interface with the customer (internal and external) and with all levels within the organization., • Excellent problem-solving skills., • Microsoft Excel, Word and PowerPoint., • SAP and/or other ERP Systems Physical Demands/Requirements • Ability to lift 30 lbs. with assistance., • Ability to travel domestically and internationally up to 40% of the time. Work Environment: Office, Warehouse, and Labs. The actual base salary a successful candidate will be offered will vary based on factors relevant to the position, as well as geography of the selected candidate. The salary range for this role is $110,000 - $125,000. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. #LI-GC1 #ZR Company DescriptionIndustry leader with great innovation.Industry leader with great innovation.

Job DescriptionMaintains and fuels all para-transit vehicles in conjunction with para-transit operations center. Performs light maintenance as necessary to buildings and grounds. • Job DescriptionMajor Responsibilities, • Opens the gates to the lot and checks para-transit parking areas to ensure all can be dispatched in a timely manner. Re-positions any vehicles that may impede the traffic in the yard., • Opens the fuel island, takes accurate stick and meter readings, and turns in inventory sheets at the end of the day., • Maintains accurate records and completes Bulk Fuel Receiving Report, Fuel Variance Report, Closing Month-end Report and Meter Calibration Report., • Notifies the Manager or designee when a fuel delivery is required and ensures that accurate stick readings are taken before and after delivery. In addition, ensures that proper procedure is followed during delivery., • Checks and fills the oil, antifreeze, power steering, transmission fluid, brake fluid, windshield washer fluid and belts on vehicles being fueled. Ensures that adequate supplies to perform checks are maintained at the fuel island. Communicates with the shop foreman regarding supplies and oil inventory dispensed into equipment., • Twice a week, checks tires for damage and proper air pressure. Tire damage must be reported to the shop immediately., • Inspects all vehicles during fueling or on a regularly scheduled basis for physical damage. Any damage will be reported immediately to the Manager or designee., • Maintains the required inventory in the spill barrel and notifies the Manager any time supplies are used or replaced., • In the event of a fuel spill, takes all necessary steps to contain the spill. The Manager or designee must be notified immediately., • Maintains adequate inventories and supplies to make minor repairs and facilitate the washing of vehicles., • Cleans interiors and exteriors of vehicles as required to maintain cleanliness of the fleet., • Performs maintenance of buildings and grounds to include yard cleanliness, grass and weeds or any other yard projects that are assigned as necessary., • Performs any other management requests or directives as requested. Minimum Education or Certifications Required • High school diploma or equivalent Minimum Experience or Skills Required • Ability to effectively prioritize tasks and manage time effectively., • Ability to appropriately interact with employees of all levels including drivers, customers, senior management, client representatives, union officials, and public., • Work extended hours regularly, including weekends and holidays to meet the business needs., • Demonstrate regular and consistent attendance and punctuality. Physical Requirements and Working Conditions • The position requires the employee to work outdoors in varying, seasonal weather conditions., • Must be able to drive company or personal vehicle to review driver performance, meet clients, and for other company related purposes., • Must be able to:, • Use full range of hearing, speech, and vision, • Use fingers (manual dexterity) handling paperwork, • Stoop, crouch, squat, or kneel when performing inspections of any type, • Bend at knee, hip, waist when performing duties, • Stand while performing inspections, • Be subject to wet, cold, or hot environmental conditions First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Description Perform engine overhauls, hydraulic system repairs, and electrical troubleshooting Utilize computerized tools to diagnose, repair, and overhaul engines, transmissions, brakes, and hydraulic systems. Perform routine servicing, including oil changes, lubrication, and cleaning parts to prevent breakdowns. Travel to job sites to repair broken-down machinery on-site. Ensure all machinery meets safety regulations, performing inspections and tests. Skills Troubleshooting, Hydraulics, Heavy equipment, Diesel, Electrical, Preventive maintenance, Pneumatics, Diesel engine, excavator, construction equipment, dozer Top Skills Details Troubleshooting,Hydraulics,Heavy equipment,Diesel,Electrical,Preventive maintenance Additional Skills & Qualifications 2+ years of experience with heavy equipment or agricultural machinery. Proficiency in diesel engines, hydraulics, electrical systems, and pneumatics. High school diploma or GED, often combined with specialized training or a degree in diesel technology. Capability to lift up to 50–100 lbs, climb on machinery, and work in varied weather conditions. Proficient in using hand tools, power tools, and diagnostic software Experience Level Expert Level Job Type & Location This is a Permanent position based out of Jersey City, NJ. Pay and Benefits The pay range for this position is $70000.00 - $95000.00/yr. union exempt full benefits - health, dental, vision 401k accrued sick earned vacation / holiday Workplace Type This is a fully onsite position in Jersey City,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job DescriptionEssential Duties and Responsibilities: • Station master of both the front and back of house, • Effectively train and mentor Crew Members, • Effectively manages the restaurant, including administration of policies and guidelines of the company, ensuring 100% customer satisfaction at all times, • Maintains fast, accurate service, positive guest relations, and ensuring products are consistent with company quality standards, • Ensures Occupational Safety & Health Act, local health and safety codes, and company safety and security policy are met, • Must maintain an “A” health inspection rating at all times, • Controls day-to-day operations by scheduling labor, ordering food and supplies, and developing the restaurant team, • Assists profit & loss, by following cash control/security procedures, maintaining inventory, managing labor, reviewing financial reports, and taking appropriate actions, • Manage Food and Labor Costs, keeping them to the level specified by management., • Conducts performance appraisals, takes disciplinary action, motivates and trains, • Ensures maintenance of equipment, facility, and grounds through the use of a preventative maintenance program, • Ensures food quality at all times, • Ensures a safe working and customer experience environment by facilitating safe work behaviors of the team, • Trains to gain the skills and experience necessary for promotion to General Manager, • Performs day-to-day responsibilities such as using cash register, operating the grill, taking customer orders, etc., as needed, • Other duties and responsibilities as assigned by your supervisor Qualifications - Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● Education/Experience: Successful Candidates/Employees of this position must have a High School Diploma or GED. A college or university degree is preferred. In addition, 1-2 years of supervisory experience in either a food service or retail environment is required with responsibility for restaurant/store profit and loss. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on management style and be actively involved in all daily functions of the store. • Certifications: A NYC Food Handlers License is required to be considered for this position., • Language Ability: Good communication and interpersonal skills are required. The successful candidate/employee will use communication skills to build an exceptional team, supervise others, give detailed instructions and training, and resolve conflicts. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively present information one-on-one, in small group situations and to other employees of the organization as well as customers. It also requires the ability to read, analyze, and interpret general business memos, including financial data. This position requires that you are able to proficiently speak, read, and write the English language, • Math Ability: The position requires the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. It also requires basic business math and accounting skills., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. Strong analytical and decision-making skills are needed., • Computer Skills: Basic personal computer literacy is required, with proficiency in Word, Excel, PowerPoint, Internet, and other appropriate software. Must be able to operate cash register., • Supervisory Responsibilities: Supervises Shift Leaders and Crew Members. Requires strong skills and experience in management, delegation, training, creating a positive work environment, and taking disciplinary action, as needed., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customers’ order without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness., • Integrity-must be honest and possess an immense code of ethics as the cashier is the primary receiver in the cash flow.

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)

Job Description Responsibilities: • Perform basic automotive maintenance tasks, such as oil changes, tire rotations, and filter replacements, to meet Meineke's high-quality standards., • Assist experienced technicians in diagnosing and troubleshooting mechanical and electrical issues in vehicles., • Follow Meineke's standard operating procedures and safety guidelines while handling tools, equipment, and vehicle systems., • Conduct routine inspections and assist in basic repairs on brakes, suspension systems, exhaust systems, and other automotive components., • Maintain accurate records of services performed, including parts used, labor hours, and vehicle conditions, ensuring compliance with Meineke's documentation standards., • Collaborate with senior technicians and service advisors to effectively communicate vehicle issues, repair recommendations, and estimated costs to customers., • Uphold Meineke's commitment to customer satisfaction by providing excellent service and addressing customer concerns professionally., • Continuously update your knowledge and skills through training sessions, workshops, and Meineke's resources to stay up-to-date with automotive industry trends and advancements.Requirements:, • High school diploma or equivalent., • Previous experience or technical training in automotive repair is preferred., • Basic understanding of automotive systems and components., • Familiarity with diagnostic equipment used in automotive repair., • Ability to follow instructions, work effectively in a team environment, and uphold Meineke's commitment to high-quality work., • Strong attention to detail and problem-solving skills., • Excellent communication and customer service skills to ensure customer satisfaction., • Physical stamina and dexterity to perform manual tasks and lift heavy objects (up to 50 pounds).Why Meineke?, • Meineke values personal and professional growth., • Benefit from ongoing training and development programs to enhance your automotive knowledge and stay up-to-date with the latest industry trends and advancements., • Join a team of driven and talented individuals who share your passion for high-quality repair work. Experience a supportive and collaborative work environment that encourages growth and camaraderie., • With locally-owned Meineke shops, experience a sense of community and connection with your customers and fellow team members.

Job Description GENESIS OF ENGLEWOOD IS HIRING! • Genesis Tech Certified, • Genesis Tech Expert, • Genesis Tech Master Benzel-Busch Family of Dealerships is a reputable and authorized family of dealerships dedicated to delivering our valued customers the highest standards of service and quality. Our journey began with a commitment to delivering the pinnacle of automotive excellence. Over the years, we have earned a reputation for offering exceptional vehicles that embody sophistication, performance, and innovation. With Mercedes-Benz, we have set the industry's standard for luxury and engineering. With the addition of our Genesis franchise, we are ushering in a new era of automotive innovation! Genesis represents the perfect fusion of modern luxury and cutting-edge technology. We are excited to offer our customers the opportunity to experience the future of mobility with a brand that redefines what it means to drive in style and comfort. What You’ll Do: • Use specialized diagnostic equipment and software to identify and troubleshoot issues with vehicle systems, including the engine, transmission, electrical systems, and onboard computer systems., • Perform a wide range of repair and maintenance tasks, such as engine repairs, brake replacements, suspension work, and regular maintenance services like oil changes and tire rotations., • When necessary, replace worn or damaged parts with genuine Genesis components to ensure the vehicle's reliability and safety., • With the increasing integration of technology in Genesis vehicles, technicians may also be responsible for updating software and firmware to address performance issues and enhance vehicle features., • Adhere to manufacturer specifications and quality control standards to ensure that all repairs and maintenance are carried out accurately and safely., • They may interact directly with customers, explaining repair recommendations, providing estimates, and addressing any concerns or questions regarding the vehicle's condition., • A high school diploma or equivalent is typically required, along with specialized automotive training and certification., • Prior experience as an automotive technician is preferred, and experience specifically with Genesis vehicles is a significant advantage., • Proficiency in using diagnostic tools and equipment and a deep understanding of vehicle systems and mechanics is essential., • Genesis Auto Technicians hold ASE (Automotive Service Excellence) certifications or equivalent credentials., • Precision and attention to detail are critical to accurately diagnosing and repairing complex vehicle systems., • Precision and attention to detail are critical to accurately diagnosing and repairing complex vehicle systems., • You’ll be a part of a premium, award-winning team., • We pride ourselves in creating a friendly, fun, company culture., • Employee perks., • Industry leading compensation plan, • Unlimited growth potential. Excellent Advancement Opportunities!, • Comprehensive training programs to advance your career, • Supplemental Life Insurance and Long-Term Disability, • 401K Retirement Plan with Employer Contributions, • Employee discounts for you and your family!, • Medical and Dental Insurance available, • $20.00 to $50.00 per hour depending on experience and technician level, • Monday to Friday schedule with holidays and weekends if needed SIGN-ON BONUS OPPORTUNITY $2,500 - $10,000 BONUS AMOUNT BASED ON EXPERIENCE Note: 50% paid after 90 days from the start date of employment, 50% balance paid after 180 days of employment EEO Statement Benzel-Busch is committed to fostering an inclusive environment that appreciates and leverages the diversity of our team. We provide equal employment opportunity (EEO) to all qualified applicants and employees without regard to race, color, ethnicity, gender, age, national origin, religion, marital status, veteran status, physical or other disability, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job DescriptionDescription: About Us Vantage Auto is a family-owned and operated dealership and service center known for our passion for unique, high-quality vehicles. From modern luxury cars to rare classics, we work on a wide variety of makes and models—no two days are ever the same. Our commitment to excellence, personalized customer service, and a tight-knit team culture set us apart in the industry. Position Overview We are seeking an experienced Automotive Mechanic to join our growing team. The ideal candidate is skilled, reliable, and passionate about cars. You'll be working on a diverse range of vehicles—everything from European luxury sedans to vintage Japanese coupes. If you take pride in your work and want to be part of a company that values craftsmanship and integrity, we want to hear from you. Responsibilities • Diagnose and repair a wide variety of vehicles with precision and efficiency, • Perform routine maintenance including oil changes, brake service, and inspections, • Troubleshoot mechanical and electrical issues using diagnostic tools, • Maintain clean, organized, and safe work environment, • Communicate clearly with service writers and team members about job status and requirements, • Stay current with manufacturer and industry service standards Requirements • Minimum 3 years of professional automotive repair experience, • Strong diagnostic and mechanical skills across multiple vehicle brands, • Ability to work independently and as part of a team, • Valid driver’s license and clean driving record, • ASE Certification preferred but not required, • Passion for unique and high-end vehicles a big plus What We Offer • Competitive compensation based on experience, • Family-oriented work environment with supportive management, • Opportunities to work on rare, collector, and luxury vehicles, • Access to modern equipment and tools, • Career growth opportunities in a thriving automotive businessRequirements:

Job DescriptionEssential Duties and Responsibilities: • Offers friendly service to all guests, • Takes customer orders, maintains fast, accurate service, and positive guest relations, • Operates grill and in an efficient and safe manner, • Ensures company standards on equipment, facility, and grounds are maintained, • Ensures food quality and 100% customer satisfaction, • Maintains the restaurant with regards to cleanliness, neatness and customer accessibility, • Uses the company cash register accurately and maintain proper control of company assets, • Works as a team member to support other restaurant employees in their duties, • Receive payments by cash, credit or debit cards, and gift cards, • Issue receipts, refunds, or change due, • Assist customers by providing menu information and resolving their complaints or concerns, • Readily identify prices of menu items and calculate bill using POS, • Enthusiastically greet customers entering restaurant, • Answer customers’ questions and provide information of store’s policies and relevant procedures about the preparation or cooking process, • Maintain a clean and orderly register area, • Mix Milkshakes and other beverages as necessary, • Complete other general cleaning duties such as emptying trash cans and cleaning dining area, • Stock and maintain fountain machine, • Ensures food quality at all times, • Other duties and responsibilities as assigned by your supervisor Qualifications - Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education/Experience: Successful Candidates/Employees of this position must have a High School Diploma or GED. In addition, 1 year of experience in either a food service or retail environment is also preferred. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on work style and be actively involved in all daily functions of the store., • Certifications: A NYC Food Handlers License is not required to be considered for this position but is preferred., • Language Ability: Good communication and interpersonal skills are required. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively communicate with co-workers and customers. This position requires that you are able to convey information effectively and accurately, vocalize clearly and loudly enough to be heard in a noisy environment and proficiently speak, read, and write the English language., • Math Ability: The position requires the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals knowledge of simple math and its application to receiving and disbursing cash., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. You will need the ability to apply general rules of the job to successfully solve problems that may occur without involving the manager. Strong analytical and decision-making skills are needed., • Computer Skills: Must be able to operate cash register., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customers’ order without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness.

Job DescriptionEssential Duties and Responsibilities: • Offers friendly service to all guests, • Takes customer orders, maintains fast, accurate service, and positive guest relations, • Operates grill and sandwich maker in an efficient and safe manner, • Ensures company standards on equipment, facility, and grounds are maintained, • Ensures food quality and 100% customer satisfaction, • Maintains the restaurant with regards to cleanliness, neatness and customer accessibility, • Uses the company cash register accurately and maintains proper control of company assets, • Works as a team member to support other restaurant employees in their duties, • Receives payments by cash, credit or debit cards, and gift cards, • Issues receipts, refunds, or change due, • Assists customers by providing menu information and resolving their complaints or concerns, • Readily identifies prices of menu items and calculate bill using POS, • Enthusiastically greets customers entering restaurant, • Answers customers’ questions and provides information of the store’s policies and relevant procedures regarding the preparation or cooking process, • Maintains a clean and orderly register area., • Mixes milkshakes and other beverages as necessary Qualifications - Knowledge, Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience: 1 year of experience in either a food service or retail environment is preferred. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on work style and be actively involved in all daily functions of the store. • Certifications: A NYC Food Handlers License is not required to be considered for this position but is preferred., • Language Ability: Good communication and interpersonal skills are required. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively communicate with co-workers and customers. This position requires that you are able to convey information effectively and accurately, vocalize clearly and loudly enough to be heard in a noisy environment, and proficiently speak, read, and write the English language., • Math Ability: The position requires knowledge of simple math and its application to receive and disburse cash. This includes the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. You will need the ability to apply general rules of the job to successfully solve problems that may occur without involving the manager. Strong analytical and decision-making skills are needed., • Computer Skills: Must be able to operate cash register., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands to retrieve boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use a stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs, and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customer orders without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness., • Integrity: Must be honest and possess an immense code of ethics as the cashier is the primary receiver of the cash flow. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor, policy and company management.

Job DescriptionAre you ready to embark on a rewarding career with a family-owned business that prioritizes professionalism and exceptional service? Can you work as part of a team to ensure everyone who enters the shop has a memorable and positive customer experience? If so, read on! Uptime Cooling Systems in North Bergen, NJ is looking for a full time Counter Salesperson to join our dynamic team. If you thrive in a fast-paced environment, enjoy providing top-notch customer service, and seek growth opportunities, then this role is perfect for you. What we offer: At Uptime Cooling Systems, we are guided by our core values of commitment, camaraderie, doing the right thing, continuous improvement, and respecting the time of both clients and employees. We provide a modern office setting with a safe work environment, offering on-the-job training and ample growth opportunities within our full-service shop. To reward your hard work, we offer competitive compensation starting at $20/hr, plus paid time off and a quarterly bonus. What you’ll do: • Welcome customers warmly and take orders with accuracy, process payments, and ensure prompt dispatch of delivery drivers, • Utilize your strong sales skills to recommend additional items or promotions to enhance the customer experience, • Keep the counter area tidy and sanitized to maintain a pleasant shop environment, • Handle customer inquiries, complaints, and issues with professionalism and efficiency, • Education: High school diploma or GED, • Experience: Previous experience of counter sales or customer service is an asset, • Strong sales and upselling skills are essential, • Must be bi-lingual, • Ability to handle cash transactions and operate a cash register, • Excellent communication and customer service skills, • Basic understanding of retail math for calculating totals, discounts, and change If you're looking to join a team that's reshaping the industry and setting new standards, Uptime Cooling Systems is the place for you. Powered by JazzHR iKj8YlXWrx

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash