Trabajos online adjunct en Jersey City, New JerseyCrear alertas

Title: BME Adjunct-BME 210 Department: Biomedical Engineering Reports To: Department Chair, Biomedical Engineering Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use an online course management system - Canvas. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in electrical or biomedical engineering or related field required. Matlab, Signal processing and Arduino programming experience is required. Preferred Qualifications: • Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage., • At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in electrical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor in Forensic Science Department: Chemistry and Environmental Science Reports To: Chair of the Chemistry and Environmental Science Position Type: Faculty Position Summary: Instructor for undergraduate courses in Forensic Science. Essential Functions: Develop and deliver lectures, organize in-class activities relevant to course material, prepare and grade assignments and exams to assess student achievement. Learn to use Canvas, NJIT's online course management system. Provide time during the week to meet with students outside of class. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Forensic Science or relative experience. The formal education and experience prerequisites may be waived at the university's discretion if the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor for Fundamentals of Engineering Design Department: Newark College of Engineering Reports To: The Department Chair Position Type: Faculty Position Summary: The Newark College of Engineering, Office of the Dean seeks applications for an adjunct instructor to teach the laboratory component of the fundamental of engineering design (FED101) GEN course. FED101 covers a variety of engineering concepts (such as critical thinking, 3D modeling, and coding). Essential Functions: • Develop and deliver lectures on 3D modeling concepts/software, electronic circuit building, various coding languages, and microcontrollers., • Prepare assignments, design laboratory experiments, and examine student learning., • Learn and use online course management system - Canvas., • Hold office hours and meet with the rest of the FED101 instructional team on a regular basis. Prerequisite Qualifications: • Candidates should have at least an M.S. degree in Engineering or a closely related field., • A minimum of 3 years of experience in teaching university level engineering courses., • At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience., • Candidates should be prepared to teach on a face-to-face basis., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Adjunct Instructor Digital Design Department: Hillier College of Arch & Design Reports To: Department Chair Position Type: Faculty Position Summary: The NJIT School of Art & Design is recruiting a pool of applicants interested in teaching classes in Digital Design at the undergraduate and graduate programs on an ongoing basis. Qualified applicants not able to take on a class in a particular semester would continue to be considered in future semesters. Adjunct instructors will be given the learning objectives and requirements for each class assigned. May also apply to teach courses in the school of Art + Design with "AD" prefixes. Essential Functions: Teaching: Integrate core concepts from past courses into the one being taught. Communicate with students, faculty, and administration on student progress throughout the semester. Prerequisite Qualifications: Must possess a design-related Bachelor's degree from an accredited institution or a bachelor's degree with appropriate industry experience to teach undergraduate courses. Advanced degree or significant equivalent industry experience required to teach at the graduate level. Preferred Qualifications: Prior teaching experience is particularly welcome. Advanced Degree preferred. Depending on the course, the instructor would need to have relevant experience in creative, analytical, or synthetic design areas. Hands-on knowledge of course topics is desired (e.g., knowledge of game design and interactivity, 2D and 3D animation, XR, motion graphics, screen based communication and UI/UX, knowledge of arduino programming and physical computing, web design and use of digital software to produce and evaluate design work, sound design, music theory, etc.) Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per credit hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Applicants will need to include in their application a CV and cover letter and should indicate which course(s) they are interested in teaching from the online catalog. Applicants must provide a link in their cover letter to a digital portfolio in PDF format containing samples of scholarly work, research, and design projects, students' work, and/or whatever material the candidate deems to be relevant. Apply NowShare Save Job

Title: BME Adjunct - Graduate Courses Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Department of Biomedical Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Engineering Physiology, Biomedical Signal Processing, Neural Engineering, and Advanced Biomaterials Characterization. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Biomedical Engineering or related field such as Electrical, Chemical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job Location(s) US-NY-New York Job ID 2025-4065 Division Academic Affairs Position Type Adjunct Type Regular Part-Time Category Mathematics New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Mathematics Department at New York Institute of Technology, has openings for part-time (adjunct) instructors for the Fall 2025 semester at the New York Tech Manhattan Campus. We expect that the new faculty hires will be assigned courses in Pre-Calculus and Calculus. Candidate must have a minimum Master's degree in Mathematics and prior experience in teaching college level in Pre-Calculus and Calculus. • Instructors teaching these courses must use Cengage WebAssign online homework for their courses., • Candidates should have prior experience in teaching using an LMS (such as Blackboard or Canvas)., • All adjuncts will be expected to participate in orientation, as needed, before the start of the semester. Please submit cover letter & resume for consideration. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job Location(s) US-NY-New York | US-NY-Old Westbury Job ID 2025-4056 Division School of Architecture & Design Position Type Adjunct Type Regular Part-Time Category School of Architecture & Design New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The School of Architecture and Design at New York Tech seeks part-time Adjunct Faculty for courses in the Digital Art and Design department. Openings are available for daytime and evening courses across multiple specialties: Open Positions & Responsibilities: UX Researcher (NYC Campus Only) Teach graduate-level UX Research and Data Analysis. Experience with prototyping tools, usability testing, and teaching online is preferred. • Animation & Virtual Production (NYC & LI Campuses) Teach BFA courses in compositing, VFX, 2D/3D animation, portfolio development, and emerging tech like AR/VR. • Design Historian (Online Asynchronous) Teach BFA courses related to Design History I & II, covering visual communication evolution. Candidates should connect historical context to digital/interactive/AI-enhanced design practice. • Motion Graphics (LI Campus Only) Teach BFA courses in the fundamentals of motion design, animation, and storytelling using tools like After Effects. Guide students from storyboarding to final delivery using real-world briefs. • Maya: Hard Surface Modeling (NYC Campus Only) Teach BFA courses with a focus on Maya 3D modeling workflows, UV/texturing, and professional pipeline practices. Currently seeking for specialty in Hard Surface Modeling in Maya. • Product Growth Design (NYC Campus Only) Teach Graduate-level instruction in experimentation, in-app tracking metrics, UX strategy, and data-informed product growth frameworks • Visual Identity & Brand Systems (NYC & LI Campuses) Teach BFA courses focused on building scalable brand systems using modern tools and AI-assisted workflows for enterprise-level clients related to Graphic Design and Visual Identity. • Digital Cinematography (NYC Campus Only) Teach a BFA course focused on introducing students to a variety of camera systems, best practices for lighting, color space and exposure, understanding green/blue screen capture and compositing workflows, and understanding the cross-discipline nature of virtual camera systems in 3D/VFX Applications General Duties • Collaborate with department chairs and coordinators on course progress., • Support a positive, inclusive, and engaging learning environment., • Adhere to university policies and academic integrity guidelines. Qualifications (By Role) UX Researcher Master's or Bachelor's + 5 years' experience in UX Research/Data Analytics. Familiarity with usability testing tools required. Online and international teaching experience preferred. Animation & Virtual Production Master's or Bachelor's + 5 years in Animation, VFX, or Digital Arts. Proficiency in Maya, Unreal Engine, motion capture, and a strong portfolio required. Design Historian Master's+ in Design History, Visual Communication, or related field. Must bridge historical design with current practices and emerging tech; prior teaching/research experience required. Motion Graphics Bachelor's (Master's preferred) + 5 years in motion graphics. Expertise in After Effects, Adobe Suite, and possibly Cinema 4D or Blender. Experience with AI-assisted tools and critiques beneficial. Maya - Hard Surface Modeling Bachelor's (Master's preferred) + 5 years in 3D production. Expertise in Maya, clean topology, and real-time asset optimization. Teaching/mentoring experience strongly preferred. Product Growth Design Bachelor's (Master's preferred) + 5 years in product design or UX. Deep knowledge of growth models, tracking tools (Amplitude, Mixpanel), and experimentation strategy. Experience mentoring or teaching desirable. Visual Identity Bachelor's (Master's preferred) + 5 years in branding or art direction. Experience with scalable identity systems, enterprise branding, and AI/ML-based tools. Teaching or speaking experience a plus. Digital Cinematography Bachelor's degree (Masters preferred) +5 years in professional cinematography, visual effects, or digital production. Proficiency in Adobe, working knowledge of 3D software preferred. Familiarity with a variety of digital camera systems and workflows (e.g., RED, Blackmagic, DSLR, smartphonesTeach a BFA course focused on introducing students to a variety of camera systems, best practices for lighting, color space and exposure, understanding green/blue screen capture and compositing workflows, and understanding the cross-discipline nature of virtual camera systems in 3D/VFX Applications. To Apply Submit a cover letter and CV for consideration. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Title: Racquetball Instructor Department: Physical Education Reports To: PE Specialist I Position Type: Adjunct Position Summary: Adjunct Professor/Instructor needed to teach PE242 Introduction to Racquetball at NJIT. Essential Functions: • Communicate with students, faculty and administration on student progress throughout the semester., • Learn to use Canvas, NJIT's online course management system., • Track student attendance throughout the semester., • Provide time during the week to meet with students outside of class., • Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: • Bachelor's degree required., • Collegiate competitive or coaching experience required., • Strong management, organizational, interpersonal and communication skills required., • Knowledge of USAR rules and a valid U.S. id are required., • The successful candidate shall be a person of integrity with high ethical standards, and exhibit a strict allegiance to university, department, and USAR rules and regulations, as well as a solid commitment to student achievement in academics., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Civil Engineering Adjunct Department: Civil & Environmental Engineering Reports To: The Department Chair Position Type: Faculty Position Summary: The John A. Reif, Jr. Department of Civil and Environmental Engineering (CEE) seeks Adjuncts to teach both undergraduate and graduate courses in Civil Engineering. Adjunct instructors will be given the learning objectives and requirements for each class assigned. CEE offers an undergraduate degree in Civil Engineering. CEE also offers graduate degrees including a Master in Civil Engineering, Masters in Environmental Engineering, Masters in Critical Infrastructure Systems, and Masters in Transportation, and a Ph.D. in Civil Engineering, Ph.D. in Environmental Engineering, and Ph.D. I Transportation. The Department also offers ONLINE Programs: Masters in Civil Engineering and Masters in Transportation Essential Functions: • Successful candidates will be expected to develop and deliver lectures; prepare and grade assignments; Learn and use the learning management system - Canvas., • Provide time during the week to meet with students outside of class (i.e. office hours) as needed; Verify presence and submit grades to the Registrar at the end of the semester. Prerequisite Qualifications: • Previous teaching experience., • Master's degree from an accredited institution in the area applicable to teaching area., • Currently employed with duties related to the teaching subject area., • Professional experience substantial in duration and level of responsibility; Sustained academic or business related or professional engagement activities within the last 5 years., • For those who have taught any college-level course before you must submit teaching evaluations; all candidates at least two reference letters are required. The letters should focus on teaching/presentation skills, domain knowledge and willingness to help others (students); and all candidates must include a personal statement., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: • Ph.D. from an accredited institution in the area applicable to teaching area; Professional engagement activities which involve application of specialized knowledge. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor ( Computer Science ) Department: Computer Science Reports To: Chair Position Type: Faculty Position Summary: The Department of Computer Science at New Jersey Institute of Technology (NJIT) seeks candidates to fill an Adjunct professor positions. Candidates are expected to teach one or two introductory programming courses and advanced courses in support of our undergraduate and graduate programs. NJIT has recently expanded its graduate programs to Jersey City, just across the Hudson River from the financial district of Lower Manhattan in New York City, where it serves the many working professionals in that region. Instructional staff are expected to teach at this site as needed. Essential Functions: The successful candidate will be expected to teach undergraduate and graduate courses as well as create course content and materials. Prerequisite Qualifications: Successful candidates must have an MS degree in Computer Science or a related area (a PhD degree is preferred). Candidates should demonstrate an expert grasp of knowledge in one or more of the following areas: data science, machine learning, artificial intelligence, data structures and algorithms, software engineering, operating systems, computer networks, and databases, either through a record of teaching excellence, or through industrial experience. Knowledge in computer science pedagogy is a plus. Preferred Qualifications: Strong written, oral and interpersonal skills are required in order to communicate effectively with students in person and online. The formal education and experience prerequisites may be waived at the university's discretion if the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: BME Adjunct for BME 111 Department: Biomedical Engineering Reports To: Chair Position Type: Faculty Position Summary: Seeking an Instructor for undergraduate course: Introduction to Physiology. The course covers an overview of human physiology as an introduction to subsequent core courses in the Biomedical Engineering curriculum. Not intended to be an exhaustive review of physiology, the course will instead emphasize key examples that highlight understanding of the interaction between the biomedical and engineering worlds. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design examination of student learning. Learn and use our online course management tool Moodle. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Biology or Biomedical Engineering or related fields. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in Biomedical Engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: ExemptPart-Time Apply NowShare Save Job

Title: Adjunct Instructor - History/Law, Technology, and Culture Department: Federated History Reports To: Chair, Federated Department of History Position Type: Faculty Position Summary: Instructor for undergraduate courses in legal history or legal studies. Essential Functions: Develop and deliver lectures, organize in-class activities relevant to course material, prepare and grade assignments and exams to assess student achievement. Effectively utilize Canvas, NJIT's online course management system. Maintain regular weekly office hours. Submit syllabus, final grades, and other requested information in a timely manner. Prerequisite Qualifications: Ph.D. or comparable terminal degree in a relevant field. At the university's discretion, education prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. To build a diverse workforce, NJIT encourages applications from individuals with disabilities, minorities, veterans and women. EEO employer. Preferred Qualifications: Prior university teaching experience. Evidence of effective teaching. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Candidates must apply via the NJIT Jobs website at jobs.njit.edu. Apply NowShare Save Job

Title: Adjunct Instructor - History Department: Federated History Reports To: Chair, Federated Department of History Position Type: Faculty Position Summary: Instructor for undergraduate courses in history especially in the following area(s): history of science, technology, medicine, environment, media, and world history. Essential Functions: Develop and deliver lectures, organize in-class activities relevant to course material, prepare and grade assignments and exams to assess student achievement. Effectively utilize Canvas, NJIT's online course management system. Maintain regular weekly office hours. Submit syllabus, final grades, and other requested information in a timely manner. Prerequisite Qualifications: Ph.D. or comparable terminal degree in a relevant field. At the university's discretion, education prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. To build a diverse workforce, NJIT encourages applications from individuals with disabilities, minorities, veterans and women. EEO employer. Preferred Qualifications: Prior university teaching experience. Evidence of effective teaching. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Candidates must apply via the NJIT Jobs website at jobs.njit.edu Apply NowShare Save Job

Adjunct Instructor in Chemistry Department: Chemistry and Environmental Science Reports To: Director, Chemistry Program Position Type: Faculty Position Summary: Instructor for undergraduate and/or graduate courses in Chemistry. Essential Functions: Develop and deliver lectures, organize in-class activities relevant to course material, prepare and grade assignments and exams to assess student achievement. Learn to use Canvas, NJIT's online course management system. Provide time during the week to meet with students outside of class. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. or Ph.D. degree in related fields, or relative experience. The formal education and experience prerequisites may be waived at the university's discretion if the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Part-time Exempt Apply NowShare Save Job

Title: CME Adjunct Professor Department: Chemical & Materials Engineering Reports To: The Department Chair Position Type: Adjunct Position Summary: The Department of Chemical and Materials Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Chemical Engineering, Materials Engineering, and Pharmaceutical Engineering. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and assess student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: Ph.D. degree in Chemical or Materials Engineering or related field such as Biomedical, Electrical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor for ENGR 320 Prototyping Essentials Department: Newark College of Engineering Reports To: The Department Chair Position Type: Faculty Position Summary: The Newark College of Engineering, Office of the Dean seeks applications for an adjunct instructor to teach Prototyping Essentials (ENGR 320) course. ENGR 320 covers a variety of design and prototyping skills and concepts and requires student to demonstrate skills with weekly fabrication projects completed in the NJIT Makerspace. The successful candidate should be familiar with modern prototyping machinery and processes including CO2 laser cutting, fiber laser cutting, standard and CNC woodworking equipment, water jets, thermoforming, 3D printing, Fusion 360 2D and 3D CAD, Fusion 360 CAM, Arduino Programming, basic electronics, measurement tools, and other equipment. Training and qualifications on the operation of specific equipment can be provided by the NJIT Makerspace staff prior to the semester. Essential Functions: • Develop and deliver lectures and labs on prototyping, 2D modeling, 3D modeling, laser cutting, electronic circuit building, microcontrollers, water jets, 3D printing, woodworking, thermoforming, fastening, etc., • Prepare materials for laboratory assignments and conduct laboratory exercise supervision., • Learn and use online course management system - Canvas., • Hold office hours in the NJIT Makerspace and coordinate with instructor running additional sections of ENGR 320 on a regular basis. Prerequisite Qualifications: • Candidates should have at least an M.S. degree in Engineering, Engineering Technology, Industrial Design, or a closely related field., • A minimum of 3 years of experience in teaching university level courses., • At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience., • Candidates should be prepared to teach on a face-to-face basis. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor in Environmental Science Department: Chemistry and Environmental Science Reports To: Environmental Science Program Director Position Type: Faculty Position Summary: Instructor for undergraduate and/or graduate courses in Environmental Science. Essential Functions: Develop and deliver lectures, organize in-class activities relevant to course material, prepare and grade assignments and exams to assess student achievement. Learn to use Canvas, NJIT's online course management system. Provide time during the week to meet with students outside of class. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. or Ph.D. degree in related fields, or relative experience. The formal education and experience prerequisites may be waived at the university's discretion if the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Adjunct Instructor in Industrial Design Department: Hillier College of Arch & Design Reports To: Department Chair Position Type: Faculty Position Summary: The NJIT School of Art & Design is recruiting a pool of applicants interested in teaching classes in the Industrial Design program on an ongoing basis. Qualified applicants not able to take on a class in a particular semester would continue to be considered in future semesters. Adjunct instructors will be given the learning objectives and requirements for each class assigned. Essential Functions: Teaching: Integrate core concepts from past courses into the one being taught. Communicate with students, faculty and administration on student progress throughout the semester. Prerequisite Qualifications: Must possess a design-related Bachelor's degree from an accredited institution or a bachelor's degree with appropriate industry experience. Preferred Qualifications: Prior teaching experience is particularly welcome. Advanced Degree preferred. Depending on the course, the instructor would need to have relevant experience in creative, analytical, or synthetic design areas. Hands-on knowledge of course topics is desired (e.g., knowledge of CNC manufacturing and the ability to teach CAM, knowledge of arduino programming, marketing, UI/UX, use of digital software to produce and evaluate design work, etc.). Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per credit hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Applicants will need to include in their application a CV and cover letter and should indicate which course(s) they are interested in teaching from the online catalog. Applicants must provide a link in their cover letter to a digital portfolio in PDF format containing samples of scholarly work, research, and design projects, students' work, and/or whatever material the candidate deems to be relevant. Apply NowShare Save Job

Adjunct Instructor - ECE Department: Electrical and Computer Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Helen and John C. Hartmann Department of Electrical and Computer Engineering has an ongoing need for Adjunct Professors to teach a variety of undergraduate and graduate courses in the area of Electrical Engineering or Computer Engineering with focus in Photonics, Nano and Quantum Materials and Devices (PNMD), Communication, Signal Processing and Machine Intelligence (CSM), Computer Systems and Networking (CSNW), Energy, Power Systems, and Sustainability (EPSS) or Robotics, Intelligent Systems, Data Engineering (RID). Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Electrical Engineering, Computer Engineering or related field. At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: BME Adjunct - FED Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use online course management system - Moodle. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in electrical or biomedical engineering or related field required. Preferred Qualifications: Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in electrical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: BME Adjunct-Biomechanics Department: Biomedical Engineering Reports To: Chair Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use online course management system - Moodle. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in biomedical engineering or related field required. Preferred Qualifications: Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in mechanical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Adjunct Instructor Architecture Department: Hillier College of Arch & Design Reports To: Department Chair Position Type: Faculty Position Summary: The NJIT School of Architecture is recruiting a pool of applicants interested in teaching classes in the Architecture program on an ongoing basis. Qualified applicants not able to teach a class in a particular semester would continue to be considered in future semesters. Adjunct instructors will be given the learning objectives and requirements for each class assigned. Essential Functions: Teaching: Integrate core concepts from past courses into the one being taught. Communicate with students, faculty and administration on student progress throughout the semester. Prerequisite Qualifications: Must possess a design-related Bachelor's degree from an accredited institution or a bachelor's degree with appropriate industry experience. Preferred Qualifications: Prior teaching experience is particularly welcome. Advanced Degree preferred. Depending on the course, the instructor would need to have relevant experience in creative, analytical, or synthetic design areas. Hands-on knowledge of course topics is desired (e.g., knowledge of CNC manufacturing and the ability to teach CAM, use of digital drawing software to produce and evaluate design work, etc.). Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per credit hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Applicants will need to include in their application a CV and cover letter and should indicate which course(s) they are interested in teaching from the online catalog. Applicants must provide a link in their cover letter to a digital portfolio in PDF format containing samples of scholarly work, research, and design projects, students' work, and/or whatever material the candidate deems to be relevant. Apply NowShare Save Job

Title: Adjunct Instructor for Academy College Department: Pre-College Programs Reports To: Director of Early College Preparatory Programs Position Type: Faculty Position Summary: The Center for Pre-College Programs is seeking adjuncts to teach high-achieving 11th and 12th graders participating in the Academy College Courses for High School Students program. Through the Academy, qualified high school students earn NJIT college credits in small, customized classes taught by faculty who have been recognized for their commitment to teaching excellence. Classes meet on Saturdays during the fall and spring sessions and Monday through Thursday during the summer session. At the end of the program, grades are recorded on an NJIT transcript. Course credits can be applied toward an undergraduate degree at NJIT and most other colleges and universities. Courses offered include: Introduction to Business - MGMT 190 (3 credits); FIN 218 - Financial Markets and Institutions (3 credits); Roadmap to Computing - CS 100 (3 credits); Fundamentals of Engineering Design - FED 101 (2 credits); English Composition: Writing, Speaking, Thinking - HUM 101 (3 credits); University Mathematics B II - Trigonometry (Pre-Calculus) - MATH 110 (4 credits); Calculus I - MATH 111 (4 credits). Essential Functions: Successful candidates are expected to develop and deliver lectures, prepare and grade assignments, learn and use the online course management system (Canvas), plan time during the week to meet with students outside of class (i.e. office hours) as needed, and verify presence and submit grades to the Registrar at the end of the semester. Prerequisite Qualifications: • Previous teaching experience., • Master's degree from an accredited institution in the area applicable to teaching area: Currently employed with duties related to teaching subject area., • Professional experience substantial in duration and level of responsibility., • Sustained academic or or professional engagement activities within the last 5 years., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: • K-12 experience is an added advantage., • Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: • Please submit a cover letter. Apply NowShare Save Job

Adjunct Instructor Interior Design Department: Hillier College of Arch & Design Reports To: Department Chair Position Type: Faculty Position Summary: The NJIT School of Art & Design is recruiting a pool of applicants interested in teaching classes in the Interior Design program on an ongoing basis. Qualified applicants not able to take on a class in a particular semester would continue to be considered in future semesters. Adjunct instructors will be given the learning objectives and requirements for each class assigned. Essential Functions: Teaching: Integrate core concepts from past courses into the one being taught. Communicate with students, faculty and administration on student progress throughout the semester. Prerequisite Qualifications: Must possess a design-related Bachelor's degree from an accredited institution or a bachelor's degree with appropriate industry experience. Preferred Qualifications: Prior teaching experience is particularly welcome. Advanced Degree preferred. Depending on the course, the instructor would need to have relevant experience in creative, analytical, or synthetic design areas. Hands-on knowledge of course topics is desired (e.g., knowledge of 2D and 3D design software, BIM, motion graphics, screen based communication and UI/UX, knowledge of arduino programming and physical computing, web design and use of digital software to produce and evaluate design work, etc.) Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per credit hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Special Instructions to Applicants: Applicants will need to include in their application a CV and cover letter and should indicate which course(s) they are interested in teaching from the online catalog. Applicants must provide a link in their cover letter to a digital portfolio in PDF format containing samples of scholarly work, research, and design projects, students' work, and/or whatever material the candidate deems to be relevant. Apply NowShare Save Job

Title: Adjunct Instructor - Information Systems/Information Technology Department: Informatics Reports To: Department Chair Position Type: Faculty Position Summary: The Department of Informatics at New Jersey Institute of Technology (NJIT) seeks candidates to fill Adjunct Instructor positions. Candidates are expected to teach one or two introductory courses and advanced courses in support of our undergraduate and graduate programs. NJIT has recently expanded its graduate programs to Jersey City, just across the Hudson River from the financial district of Lower Manhattan in New York City, where it serves the many working professionals in that region. Instructional staff are expected to teach at this site as needed. Essential Functions: The successful candidate will be expected to teach undergraduate and graduate courses Prerequisite Qualifications: Successful candidates must have an MS degree in computing or a related area. Candidates should demonstrate an expert grasp of knowledge in one or more of the following areas: information science, computer science, data science, communication, information technology, network administration, Information systems, human-computer interaction, Informatics, media technology, and/or social analytics, either through a record of teaching excellence, or through industrial experience. Knowledge in computing pedagogy is a plus. Preferred Qualifications: Strong written, oral and interpersonal skills are required in order to communicate effectively with students in person and online. The formal education and experience prerequisites may be waived at the university's discretion if the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Apply NowShare Save Job

Title: BME Adjunct-Biomaterials Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use online course management system - Canvas. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in biomedical engineering or related field required. Preferred Qualifications: Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in chemical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job Location(s) US-NY-New York | US-NY-Old Westbury Job ID 2025-4118 Division College of Arts & Sciences Position Type Adjunct Type Regular Part-Time Category College of Arts and Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Humanities Department at New York Institute of Technology anticipates openings for part-time Adjunct faculty to teach a Spring 2026 Emerging Tech and Societal Impact course. Experience teaching in related areas and well as relevant professional experience required. Minimum degree completion: MA or MS degree in the relevant field. Openings may exist on both the New York City and Long Island campuses. College-level teaching experience required. Experience with Zoom, Canvas, and other classroom or online technologies highly preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

The Chicago School is seeking an Adjunct Faculty member for the CACREP-accredited Online Clinical Mental Health Counseling program.

All personnel related activities such as compensation, benefits, transfers, job classification, assignments, working conditions, educational assistance, terminations, layoffs, and return from layoffs, and all other terms, conditions and privileges of employment will be administered without regard to

EEO Statement Equal Opportunity Florida Institute of Technology does not discriminate on the basis of race, color, national or ethnic origin, religion, disability, age, genetic information, marital status, citizenship status, veteran status, and other legally protected characteristics in its activit

Responsibilities It is expected that an online faculty member will model a personal commitment to the goals and values of Liberty University, engage in an active commitment to, and experience of, personal spiritual formation within a biblically informed Christian worldview. The professor will also c

Adjunct Professor in the Department of Counselor Education & Family Studies. In this remote role, you will teach online classes, provide student support, and perform administrative responsibilities. A Doctoral degree in counseling or a related field is required, along with clinical experience and fa

Florida Institute of Technology seeks an adjunct professor for the ABA Online program to enhance student success in courses, including certificate and master’s programs.

Sul Ross State University is seeking a Dual Credit Lecturer or Adjunct Instructor in Philosophy to teach online, synchronous courses for dual credit students.

Experience in animation using tools like Adobe Animate, Blender, and Maya, as well as a background in game design, is preferred.

University of the Cumberlands invites applications for an adjunct professor in the Department of Counseling. This role includes teaching counseling courses each semester in accredited programs.

Job DescriptionCompany Description Columbia University has been a leader in higher education in the nation and around the world for more than 250 years. At the core of our wide range of academic inquiry is the commitment to attract and engage the best minds in pursuit of greater human understanding, pioneering new discoveries, and service to society. The School of Professional Studies at Columbia University offers innovative and rigorous programs that integrate knowledge across disciplinary boundaries, combine theory with practice, leverage the expertise of our students and faculty, and connect global constituencies. Through twenty professional master's degrees, courses for advancement and graduate school preparation, certificate programs, summer courses, high school programs, and a program for learning English as a second language, the School of Professional Studies transforms knowledge and understanding in service of the greater good. Job Description Columbia University School of Professional Studies seeks industry professionals for the role of adjunct Lecturer to develop and teach Survey and Polling Methodology, an on-campus course in the school’s M.S. in Political Analytics program. Course Description Survey research has played a pivotal role in politics for the better part of the last century, with a wide range of campaign and public policy professionals conducting surveys to gain insight into the thoughts, feelings, and opinions of the electorate and citizenry as a whole. Since the early 2000s, the use of survey experiments has become exponentially more prevalent in the political realm as a way to assess attitudes, anticipate reactions, or measure causal relationships. Recent trends point to the growing importance of the internet and social media to conduct surveys and the linkage of survey data with the wealth of publicly available personal information as well as with information on individuals’ social and economic behavior. In this course, students will learn about the strengths and weaknesses of survey research as well as limitations associated with survey design and various analytical techniques, and they will acquire concrete knowledge of practical tools used in campaigns, advocacy, and election forecasting. Students will be introduced to a set of principles for conducting survey research and analyzing survey data that are the basis for standard practice in the field. Students will be familiarized with terminology and concepts associated with survey questionnaire design, sampling, data collection and aggregation, and survey data analysis to gain insights and to test hypotheses about the nature of human and social behavior and interaction. The course will present a framework that will enable students to evaluate the influence of different sources of error on the quality of data. Responsibilities This position may require developing the course, leading syllabus through the review process, and teaching the course. Responsibilities may include: • Lead in-person class lectures, instructional activities, and classroom discussions, • Evaluate student work and grade assignments, • Monitor student concerns and inquiries, and be the first point of contact for student questions, • Hold weekly office hours, • Prepare, maintain, and enhance the course in Canvas, Columbia University’s learning management system for onsite and online courses, • Complete required Canvas training (Columbia University's online learning management system) if new to SPS, • Attend Political Analytics faculty meetings, • If assigned to design the course, responsibilities also include:, • Develop course objectives that align with program-wide learning outcomes, • Create activity maps tying course activities to objectives, ensuring industry relevance, • Draft a detailed syllabus (course description, schedule, grading rubric, and assessments) for review and approval by the Program Curriculum Committee and the Committee on Instruction (COI), • Collaborate with Instructional Design to develop course materials through a consultative process. This includes partnering on course development (aligning objectives, materials, and assessments), creating dynamic instructional media (videos, infographics, and interactive resources), maintaining established courses with updates and troubleshooting, and receiving just-in-time assistance for targeted needs Serving as an adjunct Lecturer provides an outstanding opportunity to educate and mentor students in the field of project management as well as to form a rewarding professional relationship with Columbia University’s world-class faculty. Qualifications Columbia University SPS operates under a scholar-practitioner faculty model, which enables students to learn from faculty that have outstanding academic training as well as a record of accomplishment as practitioners in an applied industry setting. Requirements • Graduate degree in an area related to political science, data science, quantitative methods or related field, • 10+ years of professional experience in a role involving political analytics, • Knowledge of statistics, econometrics, quantitative analysis or related techniques, • Knowledge and familiarity with analysis software (e.g. R), • Knowledge of survey research methods, survey design, and survey data collection/aggregation/analysis Preferred Skills & Experience • Doctoral degree or equivalent in a relevant field, • Prior experience with electoral campaigns, policy-making initiatives, advocacy efforts, or lobbying operations, • University teaching experience, ideally at the graduate level Additional Information Compensation - $10,000 - $15,000 per semester-length course. Review of applications begins immediately and will continue until positions are filled. All applicants, please provide: • A resume/CV inclusive of university teaching experience -- highlight teaching at the graduate level, • A cover letter indicating the courses they would be interested in or qualified to teach, areas of subject matter expertise, and availability to teach in-person, • Evidence of teaching effectiveness (e.g., student evaluations of teaching, teaching observation summaries, etc.) Your information will be kept confidential according to EEO guidelines. Columbia University is an Equal Opportunity Employer / Disability / Veteran

Saybrook University is seeking qualified adjunct instructors for the MA Forensic Psychology Department at the Online Campus.

Courses APY 1000: Applied Psychology and You APY 2000: Cultural Psychology APY 2010: Human Growth and Flourishing (GE) APY 2020: Mental Health and Society APY 2030: Judgment and Decision Making APY 3000: Motivation and Emotion APY 3010: Survey Research and User Experience Design APY 3020: Data Analy

Point Loma Nazarene University is seeking adjunct faculty to teach Applied Psychology courses online.

Perform various administrative tasks as directed by the Instructional Mentor, Faculty Support Coordinator, Online Chairs, and other department administrators, including roster verification, reporting items, and timely submission of final grades. Participate in school retention initiatives by maintai

Saybrook University seeks qualified Adjunct Faculty to teach online courses in Clinical Psychopharmacology.Candidates should possess a doctoral degree in a relevant field and online teaching experience.The role includes enriching courses with theoretical knowledge, providing timely feedback, and bei

They strive to employ a variety of techniques for the development of good learning conditions, view each student as a unique individual, and, insofar as it is possible, provide for individual differences, abilities, and interests. Strictly adhere to Liberty University policies, representing the Univ

Position Summary The MA Forensic Psychology Department is seeking highly qualified adjunct instructors to join our diverse faculty at our Online Campus. We are looking for instructors to teach the following graduate level courses: Core courses related to Theories and Practice: Ethics, Psychopatholog

The College of Humanities and Social Sciences at GCU is home to dedicated faculty and leaders who are deeply committed to inspiring and guiding students. Our faculty are dynamic mentors, devoted to fostering academic, spiritual, and personal growth in every student they serve. The College of Humanit

What You Will Do Deliver engaging, high-quality instruction using innovative teaching methods and current industry technologies.Maintain compliance with accreditation standards.Model the holistic tenets of the nursing profession and uphold the University’s mission and pillars.Facilitate meaningful

CPY001 Park University in the United States is seeking adjunct faculty for online courses focusing on public administration and urban policy. The university provides numerous benefits including health insurance, retirement plans, and paid tuition for employees and their dependents.

The University of the Cumberlands is seeking a dynamic individual to teach undergraduate courses, including ART 131 Art Appreciation, primarily in an online format.Candidates must possess a Master's degree in Studio Art or Art History, with a commitment to student-focused teaching and professional d