Part time electrical jobs in Elizabeth, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Work Environment • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required. Requirements and Qualifications:: Requirements • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Explore opportunities with Apex Health and Rehab Monroe, a part of LHC Group, a leading post-acute care partner for hospitals, physicians and families nationwide. As members of the Optum family of businesses, we are dedicated to helping people feel their best, including our team members who create meaningful connections with patients, their families, each other and the communities we serve. Find a home for your career here. Join us and embrace a culture of Caring. Connecting. Growing together. As the Senior Living Physical Therapist you will provide age-appropriate services for adult to geriatric patients, including the following: comprehensive assessment, direct treatment to individuals and groups, supervision of treatment delivered by the PTA or tech, development of a home exercise program, patient/family instruction, participation in team and family conferences, evaluation and selection of adaptive equipment, participation in PI programs, and documentation of services according to department and facility standards. This position involves direct patient care. Primary Responsibilities: • Evaluates the patient to determine rehab potential, identifies needs, establishes an individualized treatment plan of care, and sets goals to be used in the team plan of care, • Sets initial STG's and LTG's, • Utilizes equipment in a proper and safe manner, maintains equipment inspection, maintenance and cleaning logs, reports broken or faulty equipment, • Maintains equipment logs for required equipment in the outpatient clinic, • Follows medical regimen developed for the patient. Is aware of and adheres to precautions (THR, TKR, Cardiac, Wound, etc.), • Utilizes the following safe treatment techniques: transfers, positioning, feeding, splinting, paraffin bath, cryotherapy, ultrasound, electrical stimulation, etc., • Completes D/C summary on each patient on their final visit to outpatient PT You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Current Physical Therapy licensure in state of practice, • Current CPR certification, • Current driver's license and vehicle insurance, access to a dependable vehicle, or public transportation, • Demonstrated ability to function in any home situation regardless of age, race, creed, color, sex, disability, or financial condition of the client \n \nPay Range Annual Target Pay - $104,840 - $157,259 Hourly Pay Range - $50.40 - $75.61 Per Visit Point Pay Range - $60.48 - $90.73 Annual total cash compensation for this role assumes full-time employment (40 weekly hours) at full productivity and generally follows the range above. Total cash compensation includes earnings from per visit point pay and hourly pay and is based on several factors including but not limited to local labor markets, education, work experience and may increase over time based on productivity and performance in the role. This role receives two types of compensation depending on the work being performed. When conducting visits, you will be paid per visit point rate compensation. Your per visit pay will be calculated by multiplying your per visit point rate by the productivity points you accrue for various types of visits. Each type of visit is assigned a certain number of productivity points that is inclusive of "direct" and "indirect" patient care activities. Visits are assigned based on patient and business needs. The number of visits performed each week will vary based on individual productivity targets and the productivity points assigned to the visits performed. You will be paid your hourly rate for certain non-visit activities such as orientation. We comply with all minimum wage laws as applicable. In addition to your pay, we offer benefits such as, a comprehensive benefits package, recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. #LHCJobs At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission. UnitedHealth Group is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. UnitedHealth Group is a drug - free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • Participate in on-call rotations as needed Qualifications • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Strong customer service and communication skills Preferred (but not required) • Ductless/VRF experience, • NATE certification Compensation & Benefits • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job DescriptionResidential HVAC Service Technician We invite full-time Residential HVAC Service Technicians to join our team in Union, NJ. Those with no HVAC experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-14 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential HVAC knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential HVAC service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving HVAC issues across a range of equipment — furnaces, heat pumps, mini-splits, central A/C, boilers. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. Apply now to join a remarkable team!

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • Participate in on-call rotations as needed Qualifications • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Strong customer service and communication skills Preferred (but not required) • Ductless/VRF experience, • NATE certification Compensation & Benefits • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job DescriptionHVAC Technician – Job Description Location: Newark, NJ Pay Rate: $22-$28/ Per Hour Position Summary We are seeking a skilled HVAC Technician to install, maintain, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems for residential and commercial properties in the Newark, NJ area. The ideal candidate will have strong diagnostic skills, knowledge of HVAC systems, and the ability to provide excellent customer service while ensuring all work is completed safely and efficiently. Responsibilities • Install, inspect, maintain, and repair HVAC systems and equipment, • Diagnose electrical and mechanical issues with heating and cooling systems, • Perform preventive maintenance and system inspections, • Repair or replace compressors, motors, thermostats, condensers, and other HVAC components, • Test HVAC systems for proper operation and efficiency, • Read and interpret blueprints, wiring diagrams, and technical manuals, • Ensure compliance with EPA, OSHA, and local safety regulations, • Maintain accurate service records, work orders, and inventory, • Respond to emergency service calls when needed, • Communicate professionally with customers regarding repairs and maintenance recommendations Qualifications, • High school diploma or GED required, • HVAC certification or technical training preferred, • EPA Section 608 Certification required/preferred, • Previous HVAC technician experience preferred, • Strong troubleshooting and mechanical skills, • Knowledge of refrigeration systems and HVAC controls, • Ability to work independently and as part of a team, • Valid driver's license with clean driving record, • Ability to lift heavy equipment and work in various weather conditions Preferred Skills, • Commercial and residential HVAC experience, • Experience with rooftop units, boilers, chillers, and furnaces, • Knowledge of smart thermostats and energy-efficient systems, • Excellent customer service and communication skills, • Time management and organizational abilities Work Environment, • Indoor and outdoor work environments, • May require climbing ladders, working in tight spaces, and lifting heavy equipment, • On-call, overtime, and weekend availability may be required depending on workload and emergencies

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Join JLL as a Senior Reliability Engineer and drive cutting-edge asset management strategies! You'll revolutionize how we maintain buildings and infrastructure by integrating NOC systems, energy management, and lifecycle planning while analyzing real-time data to optimize performance. Lead root cause failure analyses, conduct maturity assessments, and develop cost-effective action plans that keep critical equipment running smoothly—all while collaborating with our Engineering Services COE to deliver measurable, outcomes-based results that exceed client expectations. On-site full-time at one of our client's facilities in NJ. Here is some of your day: • Deploy strategic asset management roadmaps by integrating BAS data, fault detection systems, maintenance programs, and capital planning to develop lifecycle analyses and repair-versus-replacement recommendations, • Execute site-level reliability programs through periodic audits focused on safety, regulatory compliance, maintenance effectiveness, cost savings, and energy conservation to increase system reliability, • Create and optimize preventative maintenance tasks using Reliability Centered Maintenance approaches, ranking asset criticality and defining cost-beneficial proactive maintenance strategies, • Lead root cause failure analysis investigations on equipment failures, prescribing corrective actions and monitoring follow-up effectiveness to prevent future occurrences, • Implement condition-based maintenance programs utilizing predictive technologies including vibration analysis, oil analysis, infrared thermography, ultrasound, and motor current analysis for rotating equipment, • Develop risk mitigation strategies for critical assets deployable across the portfolio while investigating new technologies for reliability improvements, • Maintain accurate CMMS records including equipment specifications, failure history, and BOM while developing Key Performance Indicators for equipment reliability (MTBF, planned/unplanned work ratios, cost metrics), • Execute multi-discipline facility condition assessments across multiple locations, documenting asset conditions to evaluate remaining useful life and compile portfolio-wide findings for capital planning, • Coordinate engineers, technicians, and third-party resources to accomplish cost-effective reliability improvements while supporting commissioning activities for upgrade and construction projects, • Collaborate actively with Maintenance and Planning groups to ensure appropriate reliability metrics are in place and equipment history is analyzed for future trending Here is who we are looking for: Required • 10+ years implementing RCM and CbM/PdM methods with extensive knowledge of mechanical, electrical, plumbing, and fire suppression systems in commercial, manufacturing, laboratory, or distribution facilities, • Proven experience operating building automation systems, energy management platforms, and CMMS/EAM systems with strong data analytics and capital planning capabilities, • Critical environment expertise preferred (data centers, laboratories, manufacturing) with practical experience developing and optimizing maintenance strategies, lifecycle costing, and total cost of ownership analysis, • Background in multi-disciplinary projects applying system integration techniques across diverse asset types, with experience implementing Management Systems (ISO9001, ISO55001), • Exceptional ability to analyze incomplete data sets, deliver informed recommendations, and communicate complex technical information through clear written and oral reports, • Strong Microsoft Excel proficiency for manipulating large data sets with systematic attention to detail and advanced organizational skills to balance multiple stakeholder requirements, • Proven training, coaching, and mentoring abilities using various tools and techniques while interpreting organizational goals into actionable departmental activities, • Self-motivated collaborative leader with strong interpersonal skills who embraces change, develops innovative solutions, challenges the status quo, and works effectively without direct supervision Preferred • Certified Reliability Leader, • Certified Maintenance Reliability Professional, • Level 2 thermography certification, • Level 2 vibration certification, • Level 2 ultrasound certification, • BS in an Engineering discipline, mechanical or electrical This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Estimated compensation for this position: 140,000.00 – 160,000.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site –Bridgewater, NJ, Carteret, NJ, JERSEY CITY, NJ If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our _. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy _. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our _ which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

HVAC Service Sales Representative - Newark, NJ About the Role We’re looking for a driven HVAC Service Sales Representative to help grow our footprint in the Austin market. You’ll focus on building strong client relationships, uncovering new opportunities, and expanding service agreements that keep our customers running efficiently. If you have a background in mechanical service sales, know how to connect with decision-makers, and can position your team as a trusted long-term partner, this is a great fit. Who We Are We’re a leading provider of commercial and industrial HVAC, controls, electrical, and plumbing services. Our team of nearly 700 professionals supports a wide range of facilities including industrial plants, universities, healthcare systems, airports, and distribution centers. We believe success is shared. When our people grow, our customers win—so we invest heavily in both. What We Offer • Competitive weekly pay, • Comprehensive healthcare (medical, dental, vision, free telehealth, and more), • 401(k) with 5% company match, • Life, short-term, and long-term disability insurance, • Up to 4 weeks paid time off plus 9 paid holidays (veterans receive an additional day), • Career development and training opportunities, • Company vehicle or allowance, phone, uniforms, and boot/pants allowance What You’ll Do • Prospect, qualify, and develop new customer relationships, • Schedule and lead client meetings across your territory, • Build and maintain a strong referral and networking base, • Identify client pain points and present tailored HVAC and controls solutions, • Focus on renewable maintenance agreements, sustainability, and digital service offerings, • Deliver proposals and close new business, • Lead customer kick-off meetings and maintain open communication throughout the relationship, • Retain and expand existing service agreements while supporting billing and collections, • Use CRM tools to track performance and report updates, • Execute territory plans that align with company goals What We’re Looking For • 3-5+ years of sales experience, ideally in HVAC or mechanical services, • Strong communication and presentation skills, • Proven success selling maintenance or service agreements, • Ability to interpret technical information and explain it clearly to clients, • Working knowledge of HVAC systems and controls, • Organized, detail-oriented, and self-motivated Work Environment This is a field-based position with daily travel to customer sites. You’ll spend time in mechanical rooms, rooftops, and other facility areas as you meet with clients and assess systems. Regular standing, walking, and light lifting (up to 25 lbs; occasionally up to 50 lbs) are part of the job. If you’re a motivated relationship builder who thrives on helping clients solve problems and creating long-term value, we’d like to talk.

Job Description The Role Are you a problem solver? A tech-savvy tinkerer? Are you enthusiastic about science and technology? Liberty Science Center (LSC) is seeking a skilled and detail-oriented part-time Exhibit Technician with a specialization in mechanical systems, electronics, and software to support the daily operations, maintenance, and repair of our exhibitions. The Exhibit Technician should be available to work a minimum of three days per week. This role reports to the Senior Manager of Exhibit Services. What You’ll Bring A self-starter with technical chops, you take immense pride in providing exceptional customer service and being able to diagnose and fix problems. What You’ll Do LSC’s part-time Exhibit Technician will perform some combination of the following tasks and responsibilities; however, this is not an exhaustive list so other things may arise as special exhibit needs arise. Exhibit Maintenance: Responsible for daily operations of all Liberty Science Center exhibits, including daily start-up and shut-down procedures for all exhibits, and ensuring all exhibits are operationally functional when the building is open, including during evening and private events Respond promptly to radio calls that identify exhibit issues on the Floor Troubleshoot technical problems related to audiovisual, lighting, and interactive systems down to the component level, diagnosing and resolving issues efficiently Operate oscilloscopes, generators, meters, hand & power tools, as well as service and test computers Test, repair, or replace audio, video, network, and specialty wiring between components. Solder to make repairs and fix device components Conduct preventive maintenance activities to ensure the exhibits are in optimal working condition, including testing, cleaning, and replacing components Create and maintain accurate record keeping and documentation of exhibit maintenance logs, repair history, and inventory management Provide up-to-date information to supervisors, co-workers, and other internal personnel Technology Support and Integration: Support the installation, fabrication, evaluation, and dismantling of exhibits, ensuring proper integration of audiovisual, lighting, and interactive technology components Utilize mechanical drawings, schematics, and product manuals to repair and maintain exhibit technology systems Stay updated on emerging technologies and industry trends related to exhibit technology, recommending innovative solutions for enhancing visitor experiences Safety and Compliance: Adhere to safety protocols and risk management procedures while working in public areas and workspaces, ensuring a safe environment for visitors and staff Maintain a clean, organized, and clutter-free work environment, following proper storage and disposal procedures for hazardous materials Preferred Knowledge, Skills, and Abilities Strong technical aptitude and problem-solving skills in troubleshooting complex technical, audiovisual, lighting, and interactive technology systems Solid understanding of electrical and mechanical principles, including wiring, connections, and basic circuitry Knowledgeable in the use of basic carpentry techniques, hand tools, power tools, paints and adhesives, and associated safety practices Familiarity with control systems, microcontrollers, automation systems, programming languages (e.g., Raspberry Pi, Arduino) and operating systems (e.g., Microsoft Windows, macOS, and Google Chrome) is highly desirable Ability to read, analyze and interpret design schematics, shop/fabrication drawings, and standard business documents Ability to communicate effectively through writing, telephone or in-person Detail-oriented with strong organizational skills, capable of managing multiple tasks and priorities in a fast-paced environment while demonstrating a high level of professionalism, integrity, and dedication to delivering quality work Preferred Qualifications 2+ years of experience providing mechanical and technical maintenance and fabrication support Associates degree, vocational school certification, or other postsecondary education in a relevant technical field, such as engineering, computing, design and fabrication, is considered an asset Prior experience working in a museum, gallery, or similar high traffic environment is a plus Classification & Work Location This is a part-time, non-exempt position, which means this role is eligible for the overtime provision for any hours that extend beyond the standard 40-hour work week at LSC. The ideal candidate must be available to work a minimum of 3 days per week including: weekends, evenings, and holidays as business needs or special events require. This is an on-site position at Liberty Science Center located in Jersey City, NJ, and is not eligible for remote or hybrid work. Physical Demands The Exhibit Technician is required to be on their feet a majority of the day and use their hands to manipulate tools and materials. The Tech will need to perform diagnostics via visual and audio cues and should be comfortable working at various heights, including working on ladders and lifts. Furthermore, the Exhibit Technician should be comfortable maneuvering through large crowds as well as have a tolerance for working in chaotic or loud environments. The ability to lift 40 lbs. will be necessary. Training will be provided to the Exhibit Technician for the safe operation of the following lifts; scissor, toucan and fork lift. LSC’s Work Culture at a Glimpse LSC prides itself on fostering a culture that enables all employees to experience a sense of pleasure, passion, and purpose while in the workplace. We believe in embracing and driving change, inspiring fun and learning, and creating a positive and family-friendly team spirit. Our differences as individuals (race, gender, age, cultural heritage, physical ability, education, and lifestyle) are an asset and contribute to our ability to drive innovation. Lastly, at the heart of our work culture is the commitment to delivering a “wow factor” through our exceptional customer service, not only to our guests but also to one another Our Environment Liberty Science Center is located in a beautiful waterfront state park in Jersey City, New Jersey. Not only is Jersey City easy to get to from any point in Northern NJ and Manhattan, but it also holds the title of the most diverse city in the United States. Employees have access to free parking, the Hudson-Bergen Light Rail, and the NJ Path train. In addition, all employees have access to an on-site café and a terrace with stunning NYC views. Compensation The Exhibit Technician is compensated at a rate of $23.00/hr. Liberty Science Center provides generous perks for all eligible part-time employees, including: Paid time off 25% discount for staff in the LSC store 15% discount in on-site cafeteria LSC Family Membership Free Parking To Apply Please submit a resume and cover letter highlighting why this role and this organization are a good fit for you. _ Liberty Science Center is an equal opportunity employer committed to fostering an inclusive and innovative environment with the best employees. We, therefore, provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, military service, marital status or any other protected status in accordance with applicable law. If there are preparations we can make to help ensure you have a comfortable and positive interview experience, please let us know.

CONSTRUCTION MANAGER Overview The Construction Manager plays a pivotal role in overseeing day-to-day construction activities, ensuring compliance with released-for-construction documents, and coordinating all work impacting existing AirTrain operations. This role demands a hands-on leader who can balance technical expertise, particularly in electrical systems, with stakeholder coordination to ensure safety, quality, and on-time delivery. The Construction Manager will be full-time, on-site at the project site from NTP (Construction) until First Passenger Service, and part-time thereafter until Final Acceptance and closeout. Qualifications • Education: Bachelor’s degree in engineering, architecture, construction management, or related field (Electrical Engineering strongly preferred)., • Experience:, • Minimum 15 years of construction management experience., • At least one major transit, rail, or airport design-build project with a capital value ≥ $100M., • Strong electrical experience: medium voltage power distribution systems, gas insulated switchgear (GIS), and PSE&G interface., • Licenses/Certifications: Professional engineering or architectural license, or relevant construction certification, preferred., • Other: Familiarity with PANYNJ projects and ability to pass background/badging requirements at EWR Airport., • Light rail and/or people mover systems including electrical experience / power distribution systems. Some experience working for the actual contractor (not just owner side consulting) is preferred. Responsibilities • Manage scope, schedule, budget, safety, and quality of major rail/transit projects., • Coordinate engineering and inspection services; maintain strong client and subcontractor relationships., • Oversee all work impacting AirTrain operations, ensuring direct coordination with the Existing AirTrain Operator., • Lead constructability reviews, change order negotiations, and independent cost estimates., • Review schedules, proposals, invoices, requisitions, and purchase orders., • Manage contractor access/protection requests and ensure compliance with safety regulations., • Act as the owner’s representative in project meetings, presentations, and stakeholder coordination., • Provide oversight on electrical systems integration (MV distribution, GIS, utility interface)., • Lead project teams, ensuring smooth execution and resolution of claims and disputes. Minimum Requirements • 15+ years relevant CM experience., • Proven record on large, complex, lump-sum projects., • Strong background in electrical power systems for transit/rail., • Excellent communication and negotiation skills., • Ability to work independently and proactively manage field conditions., • Must be able to commute to EWR Airport. If you meet these requirements and are ready for a challenging and rewarding role, we invite you to apply. Be part of a dynamic team shaping the future of transportation and construction. Our benefits include Medical, Dental, and Vision Insurance Comprehensive health coverage to ensure employees and their families receive quality healthcare protection. 401(k) Retirement Plan Competitive retirement savings program with up to 4% company matching, helping employees build long-term financial stability. Flexible Work Schedule Empowering employees with the ability to balance work and personal life through adaptable working hours and potential remote work options. Additional Insurance Benefits Life insurance to provide financial protection for employees' loved ones Pet insurance to support employees' furry family members Paid Time Off Flexible time off to promote work-life balance and employee wellness

Job Description Full or part time Looking for Class A technician at independent repair facility, must have experience with diagnostics in emissions and electrical repair. Competitive wages, medical, 401K and paid vacation for full time employment.

Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us. Job Summary: Supermicro is seeking a highly skilled Service Engineer to support our Global Service network and contribute to building a world-class field engineering organization. This role requires flexibility to work in a data center and call center environment, providing technical support via phone and web to customers experiencing hardware and software issues. This position will be based in our office located in Jersey City, NJ. Includes the following essential duties and responsibilities (other duties may also be assigned): Why This Role Matters This position plays a critical role in ensuring customer satisfaction by providing timely and effective technical support. As a key part of our Global Service network, you will troubleshoot issues, deploy hardware solutions, and contribute to a seamless customer experience. Your expertise will directly impact the efficiency and reliability of Supermicro's service operations. What You'll Do • Provide frontline technical support to end-users via phone, email, and ticketing system., • Diagnose and troubleshoot hardware, software, and network-related issues., • Escalate complex problems to higher-level support teams when necessary., • Perform physical installation, rack and stack, cabling, and networking of data center hardware., • Assist in the deployment of server, storage, and networking equipment., • Monitor and maintain data center infrastructure to ensure optimal performance and uptime., • Perform regular maintenance and upgrades on data center hardware and software., • Collaborate with data center staff to address and resolve technical issues., • Conduct quality checks and test system functionality post-installation., • Work with internal teams to gather client requirements and provide technical expertise during the post-sales process., • Coordinate with the engineering team to ensure seamless integration of hardware solutions., • Ensure compliance with data center policies and procedures., • Document and report data center activities and incidents., • Travel up to 50% of the time to customer sites and data centers., • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering; or an Associate's degree in Electrical/Electronics Engineering with equivalent relevant experience., • 1+ year of experience in servicing complex X86 systems and parts., • 1+ years of experience in a customer support role., • Strong hardware system diagnostics skills and understanding of BIOS, drivers, and application-related issues., • Ability to troubleshoot, problem-solve, and make decisions in a fast-paced environment., • Experience with statistical Excel functions or database management., • Ability to manage multiple cross-functional projects concurrently in a rapidly changing environment., • Hands-on experience with enterprise-grade server hardware., • Strong verbal and written communication skills with an emphasis on technical communication., • Punctual, detail-oriented, and proactive in driving solutions., • Experience working in large enterprise environments or certifications in Windows and Linux., • Must have a valid driver's license and a reliable automobile., • Ability to lift/carry at least 50 lbs, • Capable of standing for extended periods to troubleshoot and repair equipment in a noisy environment (approximately 20% of the time) Please note that this position requires regular in-office attendance. The successful candidate is expected to be present in the office during standard working hours as determined by the company. In-office collaboration and participation in team meetings, training sessions, and other on-site activities are essential aspects of this role. Candidates should consider the commuting distance and be prepared to fulfill their responsibilities in the designated office location. $70,304 - $90,000 The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs. Supermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

Title: BME Adjunct - FED Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use online course management system - Moodle. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in electrical or biomedical engineering or related field required. Preferred Qualifications: Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in electrical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job DescriptionResidential Electrician We invite full-time Residential Electricians to join our team in Union, NJ. Those with no electrical experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-15 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving issues across a range of systems. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. Apply now to join a remarkable team!

Job DescriptionJob Title: Electrical Foreman Job Description As an Electrical Foreman, you will be responsible for a variety of tasks including bending, threading, and installing EMT, aluminum, and galvanized pipes ranging from ½" to 4". You will operate pulling machines, threading tools, and hydraulic benders. Your role will involve working with fire alarm schematics, data systems, and interpreting electrical drawings. You will install and troubleshoot electrical systems, including dimming systems, and work with condensing units, air handlers, and disconnect switches. A strong understanding of electrical panels, safety standards, and codes is essential. Responsibilities • Bend, thread, and install EMT, aluminum, and galvanized pipes from ½" to 4"., • Operate pulling machines, threading tools, and hydraulic benders., • Work with fire alarm schematics and install devices according to NYC FA Code., • Perform data, Cat6, and RJ45 terminations., • Read and interpret electrical drawings, including RCPs and elevations., • Wire and install receptacles, lighting, and switching systems., • Install and troubleshoot dimming systems and other electrical components., • Manage and troubleshoot condensing units, air handlers, and disconnect switches., • Ensure electrical safety and adhere to NFPA 70E training standards., • Apply knowledge of NYC and National electrical codes and perform load calculations., • Familiarity with AWG to MCM and perform conduit bending.Essential Skills, • Proficiency in electrical wiring and blueprint interpretation., • Experience in pulling wire and conduit bending., • Operational knowledge of pulling machines, threading tools, and hydraulic benders., • Ability to perform 3-way and 4-way switching, and troubleshoot electrical faults., • Knowledge of condensing units, air handlers, and condensate pumps., • Familiarity with electrical panels, live parts, and safety standards., • Knowledge of NYC and National electrical codes., • Familiarity with AWG to at least #6.Additional Skills & Qualifications, • OSHA 30 certification., • Site Safety Training (SST)., • Strong work ethic and commitment to quality work.Why Work Here? Join a leading electrical contractor and gain the opportunity to work on high-profile projects within New York City. Enjoy being part of a team that values quality work and offers a chance to develop your skills on large commercial and high-end retail projects. Work Environment You will be working with a large private commercial electrical contractor located in Carteret, NJ. The work environment includes high-end retail and large commercial projects with some of New York's largest general contractors. The start time is at 6:00 AM. Job Type & Location This is a Contract to Hire position based out of Carteret, NJ. Pay and Benefits The pay range for this position is $25.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Carteret,NJ. Application Deadline This position is anticipated to close on Jun 4, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Gregorys Coffee is looking to hire an amazing Store Leader to join our team! Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. Job Description & Responsibilities The Store Leader plays a crucial role in closely managing the day-to-day operations of a single Gregorys location. This individual will be responsible for ensuring our standards of quality, service, and cleanliness are upheld every single day. The Store Leader will be the first line of defense in managing financial performance, HR concerns, and operational issues that arise in their assigned store. Most importantly, a Store Leader will be a beacon of our culture. They will always be working to coach and develop all levels of their teams to achieve great results and career growth. This role will oversee and manage the following: People Development Ensure new hires/transfers are onboarded properly to the store and thoroughly acclimated in operational, service, and knowledge functions Ensure teams are upholding our high standards by conducting evaluations and thorough observations Work alongside and develop all levels of the team and have a firm understanding of specific coaching and development opportunities Provide continuing education to every member of your team, driving superior coffee, food, and service knowledge Identify and work with high potential talent that can be developed into our next great leaders Operational Standards Ensure all existing operational and menu standards are being executed as planned Train team on new menu and operational roll outs Ensure all employees are upholding Department of Health standards and are always thoroughly prepared to handle an inspection at any time Ensure quality standards are met by checking for taste, FIFO rotation, and visual appeal Ensure stores are kept immaculately clean, organized, and well merchandised at all times Service Standards Work side by side with your team to lead by example in giving 5-star service Coach team to have a guest-first mentality at all times regardless of side-duty tasks that need to be completed Proactively manage customer concerns/issues and coach teams on how to do the same so it doesn’t become a complaint and instead becomes a praised review Become the “Mayor” of your store neighborhood and know a significant amount of Gregulars that come in every day Collect customer business cards/email addresses to build a database that you can promote grass-roots marketing efforts towards to drive loyal business Minimize guest complaints and respond to all Yelp/Google/App/Email comments and go above and beyond for both positive and negative reviews. Facilities & Maintenance Proactively clean, service, and maintain all equipment in your store Hold monthly meetings with an agenda and clear deep cleaning tasks to be accomplished Quickly react to any major plumbing, electrical, HVAC, equipment, or other facility concerns that can severely impact business HR Management Ensure you and your team are compliant with employee labor laws Ensure changes to labor laws are thoroughly communicated and enacted Proactively manage employee issues by having regular one on one conversations with every employee on your team When necessary, deliver coaching conversations, warnings, and terminations with sufficient evidence and documentation that protects the business and the employee’s experience Financial Performance Closely manage your store’s controllable profit areas: sales, labor, and COGS Work closely with your team to build customer relationships and seek out revenue drivers outside of the 4-walls of the store Work closely with your team to build efficient schedules based on the needs of the business, using data to drive your decisions Manage weekly payroll reconciliation ensuring hours and tip distribution are 100% accurate Manage cash handling responsibilities including cash drawer counts, safe reconciliation, and bank deposits Actively monitor inventory/waste levels and ordering activity to ensure your location has sufficient product for service without exceeding your COGS targets Ensure monthly inventory counts are completed and submitted accurately Additional Expectations This is a hands-on role and a Store Leader is expected to work alongside their teams to drive revenue, efficiency, and profitability. Setting and leading by example is what will drive your success There is no set schedule for this role. A Store Leader is expected to use their best judgment to actively be in their store based on the needs of the business and the development of their people. This includes active oversight on early mornings, nights, weekends, and holidays. Regular communication with your assigned DL or Multi Unit is expected to keep him/her aware of the state of your business and proactive solutions you are providing Actively embody the 12 Leadership Principles and live them out each and everyday with your teams Attend company events and proactively encourage team members to attend as well If this is you please apply today! We use eVerify to confirm U.S. Employment eligibility.

Title: Pre-College Hourly Teacher Department: Pre-College Programs Reports To: Director for Program Operations and Outreach Pre-College Programs Position Type: Staff Position Summary: The Center for Pre-College Programs is in need of STEM Teachers for various Engineering based Saturday and Summer 2026 instruction. The teacher will work with high achieving students in various STEM related classroom instruction. Teacher / Instructor provides inquiry-based, product-oriented instruction for the students that will enhance students' knowledge, understanding and application of Science, Technology, Engineering and Mathematics (STEM) content/concepts, study skills, thinking skills, problem solving strategies and communication skills. Currently seeking teachers for the following subjects and grade levels for Saturdays and Summer Program 2026 : • Computer Science - grades 5-11, • Robotics - grades 5-11, • English Language Arts - grades 5-8, • Mathematics - grades 5-11, • Environmental, mechanical, industrial, civil, biomedical, electrical, and computer engineering, • Physical education grades 5-11, • College and Career Readiness Teacher/Counselor Essential Functions: • Works collaboratively with appropriate program staff on the content of the instructional program and related activities., • Provides a teaching plan or class outline, with handouts, for assigned classes that adhere to the guiding principles of the Early College Preparatory Programs. -Noties the Program Directors if they must be absent or late for any reason. Prerequisite Qualifications: • Teacher Certication., • Background Check., • Must be a certied elementary, middle or high school teacher in the content area assigned and/or an equivalent combination of training and experience., • Possesses good leadership abilities and communication skills., • Experienced in hands-on activities and cooperative learning and teaching., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $50.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor - SAET Department: School of Applied Engr & Tech Reports To: Chair Position Type: Faculty Position Summary: The Department of Engineering Technology has an ongoing need for Adjuncts, each teaching up to two undergraduate courses in either Construction Engineering Technology (CET), Concrete Industry Management (CIM), Construction Management Technology (CMT), Computer Technology (CMPT), Electrical and Computer Engineering Technology (ECET), Mechanical Engineering Technology (MET), Medical Informatics Technology (MIT), Manufacturing Engineering Technology (MNET) and Surveying Engineering Technology (SET) for the upcoming semester(s). Essential Functions: Teach one or two undergraduate courses for the Fall, Spring or Summer semesters, as assigned by the individual Program Coordinators. Both day and/or evening sections are available. Prerequisite Qualifications: Minimum qualifications include a MS in Construction/Civil, Electrical, Computer, Mechanical, Medical Informatics, Manufacturing, or Surveying Engineering, or in a closely related field. Preferred Qualifications: -Prior teaching experience is preferred. Full-time industrial experience in a job related to CET, CIM, CMPT, CMT, ECET, MET, MNET, MIT or SET. Bargaining Unit: UCAN-Adjunct Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: BME Adjunct - Graduate Courses Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Department of Biomedical Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Engineering Physiology, Biomedical Signal Processing, Neural Engineering, and Advanced Biomaterials Characterization. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Biomedical Engineering or related field such as Electrical, Chemical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Hourly Research Analyst Department: Computer Science Reports To: Associate Professor Computer Science Position Type: Staff Position Summary: The goal of this position is to develop responsible data management algorithms for ranking and recommendations.: Applicants must have strong background in data management and algorithm design, data mining, applied machine learning, as well as in development and implementation. Essential Functions: • Conducting research and development. Additional Functions: • Presenting at conference. Prerequisite Qualifications: • PhD in Computer Science, Electrical Engineering, Data Science., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: PhD in Computer Science Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $50.00(USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Title: Research Assistant Department: Civil & Environmental Engineering Reports To: Professor Position Type: Staff Position Summary: Perform literature search on management of used electrical vehicle batteries, visit facilities handling used electrical vehicle batteries. Essential Functions: Ability to search on the internet, talk to individuals. Prerequisite Qualifications: -Bachelors in Engg preferably background with EV Batteries. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $20.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Adjunct Instructor - ECE Department: Electrical and Computer Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Helen and John C. Hartmann Department of Electrical and Computer Engineering has an ongoing need for Adjunct Professors to teach a variety of undergraduate and graduate courses in the area of Electrical Engineering or Computer Engineering with focus in Photonics, Nano and Quantum Materials and Devices (PNMD), Communication, Signal Processing and Machine Intelligence (CSM), Computer Systems and Networking (CSNW), Energy, Power Systems, and Sustainability (EPSS) or Robotics, Intelligent Systems, Data Engineering (RID). Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Electrical Engineering, Computer Engineering or related field. At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: CME Adjunct Professor Department: Chemical & Materials Engineering Reports To: The Department Chair Position Type: Adjunct Position Summary: The Department of Chemical and Materials Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Chemical Engineering, Materials Engineering, and Pharmaceutical Engineering. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and assess student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: Ph.D. degree in Chemical or Materials Engineering or related field such as Biomedical, Electrical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job Description Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns. MMS Group is seeking an experienced Building Maintenance Technician for a 412-unit residential property located in Jersey City, NJ. Union Position Key Responsibilities: Regular Maintenance: Maintain residential apartment homes and other areas on the property, including building exteriors, interiors, and public areas, regularly. Repairs: Perform small appliance, plumbing, electrical, and other repairs in residential apartments and other areas of the property. Installation: Install tile and laminate flooring Emergency Response: Take part in the on-call rotation schedule, responding to emergency calls according to the company's policy on after-hour emergency calls Unit Turnover: Manage the turnover of empty apartment units, including repairs (e.g., sheetrock, taping, sanding, painting, and fixing doors, windows, light fixtures, etc.). Additional Duties: Perform other duties as outlined in the job description. Desired Skills: Independence: Able to work in a challenging environment with minimal direction. Problem-solving: Solution-based thinking skills are highly valued. Organizational Skills: Ability to work independently, organize tasks, multitask, manage time, and prioritize tasks Communication: Excellent verbal and written communication skills Customer Service: Great customer service skills are needed. Requirements: Experience: Three+ years of residential multifamily property management/apartment maintenance. Education: High School Diploma or equivalent Skill: experience with electrical, plumbing, and HVAC License: valid driver’s license Certification: Fire Safety Tools: Possession of basic tools needed to perform routine maintenance tasks. Physical Requirements: Physical aspects of the job may require heavy lifting, bending, kneeling, stooping, climbing, balancing, and carrying Computer Skills: Proficient in Microsoft Office (Word, Excel, Outlook). About Us: For fifty years, MMS Group and its affiliates (Arco Management and TUC Management) have been dedicated to quality property management. Our growing portfolio exceeds 40,000 residential units and includes affordable housing cooperatives, subsidized rental properties, supportive housing, and conventional apartment buildings. Our clients include progressive building owners, governmental agencies, real estate entrepreneurs, financiers, not-for-profit organizations, and cooperative and condominium boards. While each community and client are unique, each share our singular commitment to excellence. Why join our Team? We invite you to join our growing team of dedicated professionals in a high-tech environment. We offer competitive salaries, benefits, and opportunities for growth and advancement through continuous training and education programs. Contact us today to see how you can achieve your MMS Edge. Perks and Benefits: MMS Group believes in a healthy work-life balance. Keeping our employees in mind, here is a list of a few benefits we offer: Paid Holidays: 12 paid holidays per year. Paid Time-Off: Up to 2 weeks PTO in the first year, increasing with tenure. Healthcare Plans: Comprehensive Medical, Dental, and Vision plans available after 60 days of employment. Health Reimbursement Account: Up to $3K per calendar year. Life Insurance: Company-paid life insurance. Retirement Savings: Company-matched 401(k) retirement savings plan. Certifications and Licensing: Company-paid certifications and licensing. And much more! Are you the person we’re looking for? Apply now. Visit us at www.mmsgroup.com for more details! Equal Opportunity Employer #INDNE

Job Description Who We Are South Oxford Management is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for our residents and team members alike. Our owners and leadership team brings extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. AVIVA is a new Construction of 500 Units. How You Will Contribute The Maintenance Technician performs technical and mechanical work to ensure that the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality. Things You Will Do Maintenance • Perform routine work orders at the community, which may include appliance repair, completing emergency and on-call tickets., • Perform repairs and maintenance tasks across plumbing, electrical, HVAC, carpentry, and appliances., • Diagnose faults, carry out preventative maintenance, and weekly/monthly inspections., • Ensure resident service requests are completed promptly and apartments are market-ready., • Participate in on-call rotation for after-hours emergencies., • Respond to resident work orders with a customer-first attitude., • Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs., • Keep the Maintenance Shop stocked, organized, and clean., • Utilize maintenance management systems on computers and iPads to complete work orders. Safety • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates, broken steps, broken/burned-out exterior lights., • Think safety first and ensure that unsafe conditions are corrected promptly., • Report major repairs and needs to maintenance supervisor and property manager., • Remove and transfer of appliances, abandoned furniture, and equipment., • Schedule and perform routine preventive maintenance., • Utilize maintenance management systems to complete preventive maintenance and annual inspection Customer Service • Provide outstanding and proven customer service to residents and future residents., • Inspect and help coordinate all make-ready repairs and services., • Help your team anticipate problems that residents might have before they even occur., • Perform additional duties as assigned by the Maintenance Supervisor or Community Manager. Things You Will Need • You must have a valid driving license., • High School diploma or equivalent., • Willingness to work a flexible work week, including weekends, holidays, overtime, and on-call hours., • Sharp professional appearance., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, carry supplies., • Stand for extended periods of time., • May be required to lift to 50 pounds without assistance., • Travel up to 10% or rarely. Skills: • Experience supporting Construction punch of units is a plus!, • General knowledge of all things pertaining to property maintenance., • Skill in the safe use and maintenance of hand and power tools., • Have a steady hand, good eyesight, and dexterity when using hand tools, and machinery., • Able to multitask and meet deadlines., • Advanced knowledge in HVAC. HVAC certification preferred., • Proficient and comfortable using computers and various software programs., • Knowledgeable of pertinent laws including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • South Oxford Management is proud to provide training and licensing opportunities for experienced individuals ready to take the next step. What We Will Provide You South Oxford Management provides a range of insurance options and benefits for our full-time team members. Including: • $23–$25 per hour, eligible for overtime and bonuses., • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement ($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus, • Employee Rewards and Recognition You’re exceptional. Let us make you feel it. Join our team. South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford utilizes E-Verify, a web-based system that enables enrolled employers to verify the eligibility of their employees to work in the United States through the U.S. Department of Homeland Security and the Social Security Administration, subject to state law. South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or fail to cooperate with test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant, where permitted by state law.

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job Description JCFPL JOB TITLE: Building Maintenance Worker / Security Guard DEPARTMENT: Maintenance/Security LOCATION: Priscilla Gardner Main Library REPORTS TO: Building Superintendent CIVIL SERVICE JOB TITLE: Building Maintenance Worker / Security Guard STARTING SALARY RANGE: $39,942 - $40,986 per year FULL-TIME/PART-TIME: Full-Time WORKWEEK: 6am - 8pm (scheduled 35 hours/week). Evenings and weekends will be scheduled as needed. APPLICATION DEADLINE: May 7, 2026 BENEFIT SUMMARY: This summary outlines the general benefits available to library employees, designed to support their health, financial security, and work-life balance. Benefits available to Full-Time Employees: Medical coverage 60 days from the first day of employment, Prescription coverage is the first of the month following 60 days of employment at no cost to the employee and additional cost per each dependent added. Dental coverage is provided at no cost 60 days after the first day of employment. Vision coverage is provided at no cost and reimbursed at $250.00 per year. Additional Full-Time benefits include Life & AD&D insurance, 403b, Participation in pension plan (dependent on age at the time of hire date). Part-Time Employee benefits include participation in pension plan and sick/vacation leave. A more detailed summary can be found on our Employment Opportunities page located at www.jclibrary.org JCFPL is the largest municipal library in the State of New Jersey, with ten locations and growing, and a collection comprising over 2.5 million print and digital items. Our staff of nearly 120 dedicated individuals serves the residents, students, and workers of Jersey City: the largest city in Hudson County, N.J., and the second-largest city in New Jersey. The staff of JCFPL reflects the cultural and linguistic diversity of Jersey City, which is consistently ranked as the most diverse community in the United States. Collectively, our staff speaks over 16 languages, including English, Spanish, Arabic, Hindi, Tagalog, Gujarati, Marathi, Igbo, Portuguese, and others. JCFPL is committed to building on our strong foundation and expanding our ability to meet the needs of Jersey City’s growing and increasingly diverse community. About the Position Under direction, the candidate will perform varied simple and moderately physically strenuous task involved in cleaning and maintaining public library buildings and grounds. May assist in making minor repairs to buildings and/or equipment and other related duties as required Patrols the library grounds and buildings to provide protection to persons gathered therein from harm, protects public property against fire, theft, vandalism, and illegal or unauthorized entry. SORA (Security Officer Registration Act) license is required or must be obtained within the first 45 days of employment. Job Duties: The essential functions or duties listed below are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if work is similar, related or a logical assignment to the position. • Cleans rooms, offices, public areas and restrooms, • Washes and cleans windows, Floors (sweeps, washes, strips, waxes, and polish, Rugs (Sweeps and Vacuums), May paint in various areas of the branches., • May make minor repairs to the heating, electrical and other systems of varied types of buildings and services bathrooms/restrooms., • Empties wastebaskets, inside and outdoors, and recycling containers. Assist branch personnel in the removal and storage of books and other items, • Distributes supplies, • May trim hedges, rake leaves and refuse, trim driveway and sidewalk edges using equipment., • Shovels snow and spreads sand or salt on icy surfaces to prevent slipping., • Visually inspects windows, doors, locks, and other fixtures to ensure they are secure or properly locked and have not been tampered with to prevent theft, unlawful entry, and so forth., • Removes unwilling person(s) from premises after issuing verbal warning regarding a rule violation concerning disorderly conduct, loitering, unauthorized entry and so forth., • Gives verbal warnings to individuals of regulations such as those pertaining to disorderly conduct, loitering, smoking, or entry without proper passes to ensure enforcement of rules intended to protect the building and its occupants. Knowledge and Abilities:, • Knowledge of use of and minor adjustment to sweepers, vacuum, furniture, ad fixtures., • Knowledge of how to make minor repairs to heating, electrical, plumbing, and other systems., • Ability to handle cleaning problems, lift and move moderately heavy objects, organize cleaning work., • Ability to read, write, speak, understand and communicate in English sufficiently to perform the duties of this position. American Sign Language or Braille may also be considered as acceptable forms of communication., • Knowledge of techniques used in maintaining order among groups of people congregating on public property., • Ability to note significant conditions by observation and to take proper action in accord with prescribed procedures., • Knowledge of techniques used in maintaining order among groups of people congregating on public property., • Ability to note significant conditions by observation and to take proper action in accord with prescribed procedures. REQUIRED LICENSE: • Appointee will be required to possess a driver’s license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform essential duties of the position., • SORA (Security Officer Registration Act) license is required or must be obtained within the first 45 days of employment. NOTES: For all employees, regardless of full-time or part-time status, JCFPL is considered the primary employer. Work hours are assigned according to the Library’s operational needs. Work hours are not scheduled to accommodate employees’ other employment, academic, or other outside obligations, except in circumstances agreed upon in writing by the employee and the employee’s supervisor. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the employee for this job. The omission of specific statements of duties does not exclude them from the position if work is similar, related, or a logical assignment to the position. This vacancy is associated with a New Jersey Civil Service job title. The New Jersey Civil Service Commission requires all incumbents to possess and be prepared to verify the minimum experience and skills required for the associated Civil Service job title. This position is subject to residency requirements as set forth in the New Jersey First Act and not available for work visa sponsorship. Powered by JazzHR xOABLqUZ6v

Job DescriptionDescription: A large not for profit organization in Newark is seeking a part time, experienced maintenance staff member responsible for multiple sites which provides daily janitorial, maintenance and repair work. Key responsibilities include: • Ensuring that the properties are kept in top condition at all times;, • Address general maintenance and repairs improvements, • Operating machinery, equipment and supporting systems at all commercial and residential properties, • Repair projects including identifying the needs of the properties: Plumbing, and Painting, • General Building Floor Care: (dust/wet mopping/ stripping and waxing), • Gardening- Planting, weeding and leaf removal, • Snow Removal shoveling and salting, • Providing response in emergencies as needed;, • This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties or responsibilities that management may deem necessary. Background and experience • Minimum of 5+ years’ experience in a similar role with a good work history ;, • Possess plumbing, carpentry, and electrical skills/experience;, • Ability to lift up to 50lbs;, • Mechanically inclined, highly organized and detail oriented;, • Reliable, courteous, friendly, hardworking and professional;, • Must be available to assist in after-hours emergency situations; Education: High School Diploma or Equivalent certificate Drivers License required Hourly rate :$20.00 Requirements:

Job Description Munich Airport NJ LLC is a US-based subsidiary of the German Airport Operator Munich Airport. Munich Airport NJ LLC is responsible for the operations, maintenance, and concession management of Terminal A at Newark Liberty International Airport (EWR)! We are looking for an experienced and creative; Maintenance Planner/CoordinatorThe Maintenance Planner/Coordinator role involves supporting all physical infrastructure and maintenance tasks within the responsibility of the Terminal Operator. As the primary contact for internal and external customers, this position provides daily support to the FM team and contractors. The role also includes monitoring the health and performance of critical Terminal Assets and managing key building systems. Additionally, this position serves as the first responder and investigator for any technical issues in the building, coordinating efforts to recover operations. You will join a team of four Planners who rotate duties at Terminal A's operation center, covering 16 hours a day, 7 days a week. You will also work alongside maintenance contract managers, overseeing vendors and contractors and taking over small technical projects.Your Future Responsibilities • Establish schedules and work orders for Planned Maintenance and ensure stakeholders are informed accordingly., • Monitor execution, receive reports on executed PM Work Orders, and validate that information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, addressed, and resolved per SLAs using standard work order procedures., • Inform and collaborate with relevant stakeholders if an event requires their involvement., • Implement measures in response to alerts received from Facility Maintenance systems., • Oversee regular planned and ad-hoc inspections., • Monitor all KPIs and SLAs to ensure compliance., • Supervise subcontractors' performance in planned and reactive maintenance, coordinating with management as necessary., • Generate shift and daily reports as required., • Contribute to reporting and analysis to identify trends, suggest condition-based maintenance actions, and enhance ITOCC Operations., • Ensure proper maintenance of all documentation related to Work Order Execution., • Serve as the first point of resolution whenever possible., • Monitor SCADA, the building management system, and other FM software statuses and take appropriate action to address faults through corrective work order management., • Carry out root cause analysis for recurring issues and suggest preventive measures to avoid future recurrence., • Assist in developing and reviewing maintenance strategies and procedures to improve efficiency and minimize downtime., • Ensure compliance with all safety regulations and standards from our subcontractors and external vendors during maintenance and construction activities., • Lead and manage emergency technical response teams during critical incidents.Your Education & Training, • Bachelor's Degree in Electrical or Mechanical Engineering with 5 years in Facilities Management and Maintenance or Technical Associate Degree with 10 years in the same field., • Preferably, 2 years of experience within the aviation sector within the Facilities Maintenance Organization., • Prior knowledge of CMMS systems such as Maximo and Building Management Systems is advantageous., • Good experience with HVAC systems, Building Management Systems, and other facilities maintenance software monitoring programs.Your Skills & Experience, • Excellent organizational skills., • Strong verbal and written communication skills., • Exceptional attention to detail and accuracy., • Ability to interpret and record data accurately, ensuring high-quality data integrity., • Excellent customer service skills., • Ability to multitask and work effectively in a fast-paced environment., • Proficiency in using tact and diplomacy in challenging situations., • Ability to adapt to changing conditions and make decisions accordingly., • Strong analytical skills for reviewing and interpreting data., • Team player who works collaboratively towards common goals., • Ability to work independently, taking responsibility and ownership of tasks., • Capacity to establish and maintain professional relationships across various project levels., • Experience in a large, complex airport environment is an asset., • Eagerness for feedback and continuous learning in a mission-driven environment., • Possesses a strong sense of integrity, openness, fairness, and transparency.Compelling Reasons to Join Our Airport Family, • Be part of a team that embraces diversity, fosters collaboration, practices mentorship, and values a positive, healthy work climate., • Play a key role in enhancing Munich Airport's reputation in the U.S., • Experience a dynamic international working environment., • Enjoy an attractive benefits package: Health, Vision, Dental, 401(k) Matching, LTD/STD, Life Insurance, PTO. The base salary range for this role is $33.00 to $35.00 per hour. Base salary is part of our total rewards package which also includes the opportunity for annual salary increases and bonuses. Employees are eligible for them and eligible dependents to enroll in medical, dental, vision and Employee Assistance Plan (EAP) benefits as of DAY 1. Employees are also eligible for our 401(k) plan, which includes a company match, after six months of service. The employer also provides life and disability insurances and leaves provided in line with NJ and federal law. Our robust time-off policy includes paid time off and 12 paid holidays. Total compensation, including base salary to be offered, will depend on elements unique to each candidate, including candidate experience, skills, education and other factors permitted by law. Munich Airport US Holding and its subdivision Munich Airport NJ LLC are equal opportunity employers. Munich Airport NJ LLC Terms and Conditions: 1. MANJ will only contact you via SMS to follow up on job applications and schedule interviews., 2. You can cancel the SMS service at any time. Just text "STOP" to the short code. After you send the SMS message "STOP" to us, we will send you an SMS message to confirm that you have been unsubscribed. After this, you will no longer receive SMS messages from us. If you want to join again, just sign up as you did the first time and we will start sending SMS messages to you again., 3. If you are experiencing issues with the messaging program you can reply with the keyword HELP for more assistance, or you can get help directly at {support email address or toll-free number}., 4. Carriers are not liable for delayed or undelivered messages, 5. As always, message and data rates may apply for any messages sent to you from us and to us from you. You will receive {message frequency}. If you have any questions about your text plan or data plan, it is best to contact your wireless provider., 6. If you have any questions regarding privacy, please read our privacy policy below. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR SqBMPEfLJ9

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Associate Maintenance Manager HelloFresh is seeking a Maintenance Manager who will oversee the maintenance and reliability for our growing sites and equipment. You will take a hands-on approach to leadership, effectively engaging, motivating, and coaching team members. The Maintenance Manager needs to be strong in project management, leadership, and technical skills related to manufacturing equipment, HVAC, and general maintenance. You will... • Oversee M&RE-related processes including maintenance of automation and manufacturing equipment, electrical, refrigeration, PIT equipment (forklifts), building, grounds, and overall upkeep of multiple buildings, • Motivate, engage, coach, and inspire a team of associate managers and technicians, creating a positive team dynamic that encourages all employees to provide feedback and drive change from within, • Provide project management support, • Manage outside vendors and facilitate planned and unplanned repairs, • Ensure that maintenance regulations are followed, • Maintain a current list of contractors to ensure that all emergency repairs are handled, • Collaborate with other departments within the distribution center to identify problems and brainstorm improvement ideas, • Promote food safety, quality, and a safety-first culture., • Backfill Associate Maintenance Manager role when needed (call off, PTO requests). You are • Customer Centric: You are passionate about delivering on commitments to your customers, • Bold: you have passion and grit; you're not afraid to give feedback to your team and your manager, • Agile: you roll with the punches and dont get overwhelmed easily, you adapt quickly to change and know how to deliver results in a fast-paced, autonomous environment, • Decisive: You realize when making a decision is as important as the time it takes to make that decision, • Problem-solver: you understand there is not a one-size-fits-all approach when problem-solving; you think outside the box and enjoy grinding away at issues to find a solution At a minimum, you have... • Minimum 5 years' experience managing facilities maintenance/operations and reliability within the Food/Beverage/Perishables/Distribution industry, • Bachelor's Degree preferred; high school diploma or GED required, • High level of integrity and ethics with excellent follow-through, • Knowledge of OSHA regulations and compliance, • Able to read and interpret blueprints, manuals, and schematics, • Exposure to mechanical, electrical, automation and refrigeration systems, • Comfortable working in cold environments with some areas of facility at 40F, • Excitement for working in a start-up environment with a high level of ambiguity and change, • Effective communicator for employees, direct reports, cross-functional teams, and senior leadership, • Flexibility to work weekends, holidays and/or nights Youll get • Competitive salary, 401k with company match that vests immediately upon participation, and company equity plan based on role, • Generous PTO, including sabbatical, and parental leave of up to 16 weeks, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Tuition reimbursement for continuing education (upon 2 years of service), • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to 7 different Employee Resource Groups (ERGs) including those for BIPOC, women, veterans, parents, and LGBTQ+, • Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Your decision to redact this information will not adversely affect the consideration of your application. We evaluate all candidates based on their skills, qualifications, and experience.?Please be aware that should you receive a conditional offer of employment, we may be required to request this information for legally permissible purposes, such as verifying eligibility for employment or for benefits administration and background checks. We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Companys commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on and . HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: _, • APAC: _, • United States: _, • Canada: _

Title: Hourly Data Analyst Department: Electrical and Computer Engineering Reports To: Professor Position Type: Staff Position Summary: Heat is an inherent part of gasoline-powered (e.g., engines), or sustainable generators (e.g., solar, or wind). Heat is also generated from wastelands and the project aims at using the, otherwise wasted thermal energy, as an additional electrical resource. The project studies thermo-cells as means to generate electricity - these are the chemistry version of solid-states thermo-electric cells. Essential Functions: -Perform electrochemical wet-laboratory work on Thermo-cells. -The candidate should be able to fabricate electrochemical cells by laying out thin films and characterize them by taking electronic data. Prerequisite Qualifications: -The candidate ought to have an UG or graduate degree in Chemistry or Chemical Engineering with wet-lab experience, preferably in electrochemistry of Thermo-cells. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $16.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Job Locations US-NJ | US-PA | US-DE | US-NY ID 2026-19201 Job Function Service & Support As one of the world's leading analytical instrumentation companies, Bruker covers a broad spectrum of advanced solutions in all fields of research and development. All our systems and instruments are designed to improve safety of products, accelerate time-to-market and support industries in successfully enhancing quality of life. We've been driving innovation in analytical instrumentation for 60 years now. Today, worldwide more than 10,000 employees are working on this permanent challenge, at over 90 locations on all continents. Please note this position requires frequent travel within the region and residence within the region. The specified region will be the states of VA, WV, MD, DE, NJ, PA, NY, CT, VT,MA, ME, and NH. New opportunity for a Field Service Engineer to install and support high technology equipment in research, pharmaceutical, university and government labs for Bruker BioSpin, a leading manufacturer of nuclear magnetic resonance (NMR), magnetic resonance imaging (MRI) and compact magnetic resonance (CMR) spectroscopy instruments and accessories. The Field Service Engineer works with highly complex equipment that requires advanced understanding of these instruments to perform installation, maintenance, troubleshooting, and repair service activities. Install new or modified systems or accessories at customer facilities and ensure full functionality according to specifications. • Provide on-site technical assistance to install, service, and repair equipment., • Familiarize and train customers for basic operation of the equipment., • Secure customer acceptance of installation and repair sign-off., • Re-qualify the entire instrument after service repair by running complex compounds for verification., • Serve as a supportive and effective communication link between the customer and company to ensure customer service satisfaction., • Actively attend and participate in life science technology and product training., • Perform other duties as required., • B.S. in Physics, Electrical Engineering, Electronics, Biotech, Biology or Chemistry discipline., • Minimum 3 years' work experience diagnosing and repairing complex mechanical, electromechanical and/or electronic equipment., • Knowledge of NMR and MRI, analog electronics, high voltage circuitry/circuits, cryogenics, and ultra-high vacuum technology is highly desirable., • Strong technical skills involving analytical instrumentation., • Excellent customer focus with ability to reliably respond to inquiries, communicate and interact with Scientists that possess a Ph.D. (or Master's Degree) in Biochemistry, Biophysics or Microbiology., • English fluency with strong oral, reading, written, MS Office, computer, technical data, and networking communication and presentation skills, with ability to communicate complex technical issues in an easy to understand manner., • Excellent organizational skills with ability to work independently, prioritize, multi-task, follow through, and meet deadlines within an entrepreneurial and customer-focused work environment., • Ability to satisfactorily complete position compliance and training requirements, • Attend and actively participate in quarterly scientific technical training programs, • Ability to lift up to 50 lbs., transport equipment and tools in excess of 300 lbs., • This position requires lifting heavy objects and maneuvering large bulky items (examples: tools, mechanical pumps, rigging equipment, power supplies, field mapper)., • This position requires reasonable dexterity to perform manual functions in confined spaces., • Proven ability to follow safety standards, practices, and codes., • Valid Driver License in good standing, issued by resident state, with reliable transportation., • U.S. Citizenship or U.S. Permanent Resident status required., • Maintain a valid passport with flexibility for domestic and international travel., • May be required to pass security clearance investigation. At Bruker, the base salary is part of our total compensation. The estimated base salary range for this full-time position is between $60,750 and $108,000 and provides an opportunity to progress as you grow and develop within a role. The base salary for the role will depend on several job-related factors, including, but not limited to, education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge, and travel requirements for this position. Full-time employees may also be eligible for a performance-related incentive in addition to a full range of benefits, including 401(k) with company match, an employee stock purchase plan, medical and dental plans, life insurance, short-term and long-term disability insurance, employee assistance program and paid time off including vacation, sick time and holidays, and more. Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics. Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

Job Description JCFPL JOB TITLE: Building Maintenance Worker DEPARTMENT: Maintenance/Security LOCATION: Earl Morgan Branch REPORTS TO: Branch Manager CIVIL SERVICE JOB TITLE: Building Maintenance Worker STARTING SALARY RANGE: $38,843 - $39,887 per year FULL-TIME/PART-TIME: Full-Time WORKWEEK: 6am - 8pm (scheduled 35 hours/week). Evenings and weekends will be scheduled as needed. APPLICANTION DEADLINE: December 23, 2025 BENEFIT SUMMARY: This summary outlines the general benefits available to library employees, designed to support their health, financial security, and work-life balance. Benefits available to Full-Time Employees: Medical coverage 60 days from the first day of employment, Prescription coverage is the first of the month following 60 days of employment at no cost to the employee and additional cost per each dependent added. Dental coverage is provided at no cost 60 days after the first day of employment. Vision coverage is provided at no cost and reimbursed at $250.00 per year. Additional Full-Time benefits include Life & AD&D insurance, 403b, Participation in pension plan (dependent on age at the time of hire date). Part-Time Employee benefits include participation in pension plan and sick/vacation leave. A more detailed summary can be found on our Employment Opportunities page located at www.jclibrary.org JCFPL is the largest municipal library in the State of New Jersey, with ten locations and growing, and a collection comprising over 2.5 million print and digital items. Our staff of nearly 120 dedicated individuals serves the residents, students, and workers of Jersey City: the largest city in Hudson County, N.J., and the second-largest city in New Jersey. The staff of JCFPL reflects the cultural and linguistic diversity of Jersey City, which is consistently ranked as the most diverse community in the United States. Collectively, our staff speaks over 16 languages, including English, Spanish, Arabic, Hindi, Tagalog, Gujarati, Marathi, Igbo, Portuguese, and others. JCFPL is committed to building on our strong foundation and expanding our ability to meet the needs of Jersey City’s growing and increasingly diverse community. About the Position Under direction, the candidate will perform varied simple and moderately physically strenuous task involved in cleaning and maintaining public library buildings and grounds. May assist in making minor repairs to buildings and/or equipment and other related duties as required. Job Duties: The essential functions or duties listed below are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if work is similar, related or a logical assignment to the position. • Cleans rooms, offices, public areas and restrooms, • Washes and cleans windows, Floors (sweeps, washes, strips, waxes, and polish, Rugs (Sweeps and Vacuums), May paint in various areas of the branches., • May make minor repairs to the heating, electrical and other systems of varied types of buildings and services bathrooms/restrooms., • Empties wastebaskets, inside and outdoors, and recycling containers. Assist branch personnel in the removal and storage of books and other items, • Distributes supplies, • May trim hedges, rake leaves and refuse, trim driveway and sidewalk edges using equipment., • Shovels snow and spreads sand or salt on icy surfaces to prevent slipping., • Visually inspects windows, doors, locks, and other fixtures to ensure they are secure or properly locked and have not been tampered with to prevent theft, unlawful entry, and so forth. Knowledge and Abilities:, • Knowledge of use of and minor adjustment to sweepers, vacuum, furniture, ad fixtures., • Knowledge of how to make minor repairs to heating, electrical, plumbing, and other systems., • Ability to handle cleaning problems, lift and move moderately heavy objects, organize cleaning work., • Ability to read, write, speak, understand and communicate in English sufficiently to perform the duties of this position. American Sign Language or Braille may also be considered as acceptable forms of communication., • Knowledge of techniques used in maintaining order among groups of people congregating on public property., • Ability to note significant conditions by observation and to take proper action in accord with prescribed procedures. REQUIRED LICENSE: • Appointee will be required to possess a driver’s license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform essential duties of the position. NOTES: For all employees, regardless of full-time or part-time status, JCFPL is considered the primary employer. Work hours are assigned according to the Library’s operational needs. Work hours are not scheduled to accommodate employees’ other employment, academic, or other outside obligations, except in circumstances agreed upon in writing by the employee and the employee’s supervisor. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the employee for this job. The omission of specific statements of duties does not exclude them from the position if work is similar, related, or a logical assignment to the position. This job description is associated with a N.J. Civil Service job title; the New Jersey Civil Service Commission requires all incumbents to possess and be prepared to verify the minimum experience and skills required for the associated Civil Service job title. This vacancy is associated with a New Jersey Civil Service job title. The New Jersey Civil Service Commission requires all incumbents to possess and be prepared to verify the minimum experience and skills required for the associated Civil Service job title. This position is subject to residency requirements as set forth in the New Jersey First Act and not available for work visa sponsorship. Powered by JazzHR rp68Lhznb6

Job Description JCFPL JOB TITLE: Building Maintenance Worker DEPARTMENT: Maintenance/Security LOCATION: Cunningham Branch REPORTS TO: Branch Manager CIVIL SERVICE JOB TITLE: Building Maintenance Worker STARTING SALARY RANGE: $39,942 - $40,986 per year FULL-TIME/PART-TIME: Full-Time WORKWEEK: 6am - 8pm (scheduled 35 hours/week). Evenings and weekends will be scheduled as needed. APPLICANTION DEADLINE: May 12, 2026 BENEFIT SUMMARY: This summary outlines the general benefits available to library employees, designed to support their health, financial security, and work-life balance. Benefits available to Full-Time Employees: Medical coverage 60 days from the first day of employment, Prescription coverage is the first of the month following 60 days of employment at no cost to the employee and additional cost per each dependent added. Dental coverage is provided at no cost 60 days after the first day of employment. Vision coverage is provided at no cost and reimbursed at $250.00 per year. Additional Full-Time benefits include Life & AD&D insurance, 403b, Participation in pension plan (dependent on age at the time of hire date). Part-Time Employee benefits include participation in pension plan and sick/vacation leave. A more detailed summary can be found on our Employment Opportunities page located at www.jclibrary.org JCFPL is the largest municipal library in the State of New Jersey, with ten locations and growing, and a collection comprising over 2.5 million print and digital items. Our staff of nearly 120 dedicated individuals serves the residents, students, and workers of Jersey City: the largest city in Hudson County, N.J., and the second-largest city in New Jersey. The staff of JCFPL reflects the cultural and linguistic diversity of Jersey City, which is consistently ranked as the most diverse community in the United States. Collectively, our staff speaks over 16 languages, including English, Spanish, Arabic, Hindi, Tagalog, Gujarati, Marathi, Igbo, Portuguese, and others. JCFPL is committed to building on our strong foundation and expanding our ability to meet the needs of Jersey City’s growing and increasingly diverse community. About the Position Under direction, the candidate will perform varied simple and moderately physically strenuous task involved in cleaning and maintaining public library buildings and grounds. May assist in making minor repairs to buildings and/or equipment and other related duties as required. Job Duties: The essential functions or duties listed below are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if work is similar, related or a logical assignment to the position. • Cleans rooms, offices, public areas and restrooms, • Washes and cleans windows, Floors (sweeps, washes, strips, waxes, and polish, Rugs (Sweeps and Vacuums), May paint in various areas of the branches., • May make minor repairs to the heating, electrical and other systems of varied types of buildings and services bathrooms/restrooms., • Empties wastebaskets, inside and outdoors, and recycling containers. Assist branch personnel in the removal and storage of books and other items, • Distributes supplies, • May trim hedges, rake leaves and refuse, trim driveway and sidewalk edges using equipment., • Shovels snow and spreads sand or salt on icy surfaces to prevent slipping., • Visually inspects windows, doors, locks, and other fixtures to ensure they are secure or properly locked and have not been tampered with to prevent theft, unlawful entry, and so forth. Knowledge and Abilities:, • Knowledge of use of and minor adjustment to sweepers, vacuum, furniture, ad fixtures., • Knowledge of how to make minor repairs to heating, electrical, plumbing, and other systems., • Ability to handle cleaning problems, lift and move moderately heavy objects, organize cleaning work., • Ability to read, write, speak, understand and communicate in English sufficiently to perform the duties of this position. American Sign Language or Braille may also be considered as acceptable forms of communication., • Knowledge of techniques used in maintaining order among groups of people congregating on public property., • Ability to note significant conditions by observation and to take proper action in accord with prescribed procedures. REQUIRED LICENSE: • Appointee will be required to possess a driver’s license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform essential duties of the position. NOTES: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the employee for this job. The omission of specific statements of duties does not exclude them from the position if work is similar, related, or a logical assignment to the position. This vacancy is associated with a New Jersey Civil Service job title. The New Jersey Civil Service Commission requires all incumbents to possess and be prepared to verify the minimum experience and skills required for the associated Civil Service job title. This position is subject to residency requirements as set forth in the New Jersey First Act and not available for work visa sponsorship. Powered by JazzHR 3r5UrxGwMb

Job Description Location: 631 Grove St. Jersey City, NJ Job Type: Full Time Starting Pay Rate: $18.00 - $20.00/hr About Carlo’s Bakery Carlo’s Bakery, home of the “Cake Boss,” is a world-renowned bakery known for its high-quality, handcrafted desserts and exceptional customer experience. We take pride in our craftsmanship, creativity, and family-oriented culture. Position Summary We are seeking a Maintenance Technician who will be responsible for the day-to-day maintenance of our factory including equipment's repair, etc. Candidates must have previous proven working experience in the same environment. Responsibilities • Inspects and troubleshoots bakery machinery, including ovens, conveyors, and packaging machines., • Performs preventive maintenance and minor repairs on production line machinery., • Conducts routine maintenance on control circuitry, bearings, chains, and other moving parts., • Assists with equipment assembly, installation, and adjustments., • Follows safety protocols and maintains records of work performed., • Perform basic woodwork tasks. Qualifications • Strong mechanical aptitude with a deep understanding of troubleshooting, maintaining, and repairing machinery., • Proficiency with electrical systems and the ability to read schematics is a plus., • Excellent problem-solving abilities and keen attention to detail., • Strong communication skills to work effectively with team members and ensure seamless operations. Why Join Carlo’s Bakery? • Opportunity to grow with an internationally recognized brand., • Friendly and collaborative work environment., • Hands-on experience in the baking industry., • Employee discounts on our famous baked goods. Apply today and become part of the Carlo’s Bakery family — where passion, craftsmanship, and teamwork create something truly sweet every day!

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle is seeking a professional a Vendor Services Representative in Clark, New Jersey. This position will be a hybrid remote/in-office position, currently required in office two days per week, with some additional required meetings and event attendance in Clark, NJ. This is a full-time, Monday thru Friday position. What You'll Do: • Reviewing monthly vendor statements of account, • Provide support and service for designated vendors, • Investigate and resolve account issues: Account holds, missing invoices, partial or over payments, chargebacks etc., • Review and verify invoices set to pay, • Maintain account information: remit address, AR rep, terms, payment methods, • Work closely with Invoice Processing to ensure payments are made Assist in AP activities for fiscal year end closeout Who We Are Looking For • High School Diploma or equivalent, • Customer Service experience, • Strong Microsoft Excel skills, • Organized and excellent time management skills a must, • Positive attitude and problem solving ability, • Familiarity of INFOR SXE a plus, • Experience with accounts payable representation, • Thorough knowledge of accounting debit/credit entries, • Ability to interact professionally with all levels of management, employees, and vendors What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our social medias! LinkedIn: @Turtle Instagram: @TurtleandHughes Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description GOJET AIRLINES - A&P LICENSED MAINTENANCE TECHNICIAN LOCATION - NEWARK, NJ The GoJet Airlines' A&P Maintenance Team plays a vital role in ensuring the safety of our passengers and is a key driver of the airline's operational performance. We are looking for highly qualified, Licensed Mechanic Technicians to fill positions at our Chicago-O'Hare International Airport Line Maintenance Base. As an A&P Licensed Maintenance Technician at GoJet Airlines, you will be responsible for the inspection, repair, and maintenance of our aircraft to ensure they meet the highest standards of safety and performance. You will work closely with other maintenance personnel to troubleshoot and resolve issues, perform routine inspections, and comply with all regulatory requirements. QUALIFICATIONS/REQUIREMENTS: • Must hold an FAA Airframe and Power plant license, • Legal right to work in, and travel freely in and out of, the United States, • Must possess a minimum of high school diploma or equivalent, • Must possess a valid driver‘s license, • Legally operate company vehicles and equipment with no restrictions, • Must be able to provide your own tools, • FCC License Helpful, but not required, • DOT required pre-employment drug test, • TSA required fingerprint check for Criminal History Records Check, • Must be able to work any shift, • Must be able to read and converse fluently in English, • Must be able to lift 50 lbs., • Able to stand for extended periods of time, • Able to climb stairs, ladders, and work platforms, • Able to kneel, bend, and sit KEY RESPONSIBILITIES: • Aircraft Maintenance:, • Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, avionics, and other critical components., • Conduct thorough inspections to identify and address potential issues before they become problems., • Troubleshooting and Repairs:, • Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment., • Repair or replace defective parts, ensuring all work is completed to regulatory and company standards., • Compliance and Documentation:, • Ensure all maintenance activities comply with FAA regulations, company policies, and industry standards., • Accurately document all maintenance work performed, including parts used, repairs completed, and inspections conducted., • Collaboration and Communication:, • Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations., • Provide clear and concise communication regarding maintenance issues and status updates. COMPENSATION: • Industry leading pay scale $26.71/hr -$49.20/hr • Generous annual pay increase, • Performance bonuses, • "Promote from Within" philosophy BENEFITS: • Health, dental & life Insurance, • 401(k) retirement plan, • Airline travel benefits, • Discounts on cruises, hotels, rental cars, and more About GoJet Airlines: GoJet Airlines operates as a regional partner for United Airlines, providing daily flights across the U.S. and Canada. Our commitment to safety, customer service, and operational excellence has established us as a leader in the regional airline industry. Join our team and be a part of our exciting journey in the aviation world!

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle is seeking a professional in the Credit Associate role in Clark, New Jersey. This position will be a hybrid remote/in-office position, currently required in office two days per week, with some additional required meetings and event attendance in Clark, NJ. This is a full-time, Monday thru Friday position. There is opportunity for career growth with this position. What You'll Do • Daily tasks include running and reconciling customer statements., • Consolidating customer invoices and issuing credits., • Prioritize past due accounts to ensure timely customer payments., • Working with purchasing staff to resolve invoice discrepancies., • Meeting with customers to settle disputes. What You'll Bring • High School Diploma or equivalent, • Customer Service experience, • Strong Microsoft Office skills, primarily excel, • Attention to detail and organizational skills a must, • Positive attitude and problem-solving ability, • Familiarity of INFOR/SXE is a plus What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionResidential Plumber We invite full-time Residential Plumbers to join our team in Union, NJ. Those with no plumbing experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-15 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential plumbing knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential plumbing service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving plumbing issues across a range of systems. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Perform other related duties as assigned. Required Skills/Abilities: • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain in good standing order, as per TSA’s TWIC criteria. Education and Experience: • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Minimum of 3 years of experience in a manufacturing or industrial environment. Travel Requirements: • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • A valid driver's license and reliable transportation. Physical Requirements: • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA., • Work environment frequently changes from office settings to standing, climbing, and working in a plant environment under varying weather and climate conditions. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionSalary: $18 to $22 per HR Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success! We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the NY Metro area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various businesses including retail, hospital, and educational institutions, looking for strong communication skills and enjoyment of working with the public. All training provided by the company. Please email resume to jobs@beveragesystems.org Benefits Offered: • Medical, dental and vision, • Retirement, • EAP Benefits, • Paid-Time-Off, • Company cell phone Here is a brief description of the job: The Technician will professionally diagnose, restore, and repair beverageequipment throughout the day.Responsible for properly installing, repairing and maintaining field beverage equipment. Must represent the company and its customers in a professional manner. Maintain an acceptable level of productivity related to the amount of completed calls. Primary Responsibilities: • Perform installations, repairs and maintenance on commercial beverage and related equipment at our customers location., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform mechanic skills including, but not limited to, mechanical, electrical, plumbing, troubleshooting and repair of beverage equipment., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Demonstrate proper knowledge of equipment. Communicate with the supervisor when extra training may be needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with regulations and maintain a clean and orderly work area., • Conduct yourself in a professional manner at all times while treating customers, driving company vehicles, etc. Treat others how you would like to be treated, • Fill out field service reports properly, legible and with as much information as possible. When eligible., • Maintain frequent communication with the dispatcher to assure that the right information is relayed and entered into our system., • Maintain company vehicles in good working condition, both mechanically and organized., • Arrange for company vehicles to get routine maintenance and any required service. Make sure proper documentation is kept up-to-date and kept in company vehicles at all times.All repairs and service on vehicles covered by the company through our fleet management company., • Fulfill all new and existing training requirements as set by service managers and/or technician development directors., • Must be able to cover emergency calls on weekends on a rotating basis as laid out by the manager to satisfy the market needs., • Other duties as assigned. Qualifications & Requirements: • Must be able to maintain a valid driver's license., • Clean Driver Record, • Occasional Weekend Availability, • Must have some electrical troubleshooting knowledge., • Be able to read volts, amps, ohms and continuity on multimeters., • Must have some plumbing knowledge., • Must provide your own general tools. Specialty industry tools provided to the technician on loan by the company. Working Conditions: Work includes long distance driving. Occasionally lifting of machinery and/or items that may exceed 75 lbs. Must be able to work overtime as requested by management, within reason. If you want to be a part of a growing family business who has a passion for their employees and their customers please email resume to jobs@beveragesystems.org

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.LI-RD1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills. #LI-RD1Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.