Part time electrical jobs in Clifton, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Work Environment • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required. Requirements and Qualifications:: Requirements • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Explore opportunities with Apex Health and Rehab Monroe, a part of LHC Group, a leading post-acute care partner for hospitals, physicians and families nationwide. As members of the Optum family of businesses, we are dedicated to helping people feel their best, including our team members who create meaningful connections with patients, their families, each other and the communities we serve. Find a home for your career here. Join us and embrace a culture of Caring. Connecting. Growing together. As the Senior Living Physical Therapist you will provide age-appropriate services for adult to geriatric patients, including the following: comprehensive assessment, direct treatment to individuals and groups, supervision of treatment delivered by the PTA or tech, development of a home exercise program, patient/family instruction, participation in team and family conferences, evaluation and selection of adaptive equipment, participation in PI programs, and documentation of services according to department and facility standards. This position involves direct patient care. Primary Responsibilities: • Evaluates the patient to determine rehab potential, identifies needs, establishes an individualized treatment plan of care, and sets goals to be used in the team plan of care, • Sets initial STG's and LTG's, • Utilizes equipment in a proper and safe manner, maintains equipment inspection, maintenance and cleaning logs, reports broken or faulty equipment, • Maintains equipment logs for required equipment in the outpatient clinic, • Follows medical regimen developed for the patient. Is aware of and adheres to precautions (THR, TKR, Cardiac, Wound, etc.), • Utilizes the following safe treatment techniques: transfers, positioning, feeding, splinting, paraffin bath, cryotherapy, ultrasound, electrical stimulation, etc., • Completes D/C summary on each patient on their final visit to outpatient PT You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Current Physical Therapy licensure in state of practice, • Current CPR certification, • Current driver's license and vehicle insurance, access to a dependable vehicle, or public transportation, • Demonstrated ability to function in any home situation regardless of age, race, creed, color, sex, disability, or financial condition of the client \n \nPay Range Annual Target Pay - $104,840 - $157,259 Hourly Pay Range - $50.40 - $75.61 Per Visit Point Pay Range - $60.48 - $90.73 Annual total cash compensation for this role assumes full-time employment (40 weekly hours) at full productivity and generally follows the range above. Total cash compensation includes earnings from per visit point pay and hourly pay and is based on several factors including but not limited to local labor markets, education, work experience and may increase over time based on productivity and performance in the role. This role receives two types of compensation depending on the work being performed. When conducting visits, you will be paid per visit point rate compensation. Your per visit pay will be calculated by multiplying your per visit point rate by the productivity points you accrue for various types of visits. Each type of visit is assigned a certain number of productivity points that is inclusive of "direct" and "indirect" patient care activities. Visits are assigned based on patient and business needs. The number of visits performed each week will vary based on individual productivity targets and the productivity points assigned to the visits performed. You will be paid your hourly rate for certain non-visit activities such as orientation. We comply with all minimum wage laws as applicable. In addition to your pay, we offer benefits such as, a comprehensive benefits package, recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. #LHCJobs At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission. UnitedHealth Group is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. UnitedHealth Group is a drug - free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job DescriptionHVAC Technician – Job Description Location: Newark, NJ Pay Rate: $22-$28/ Per Hour Position Summary We are seeking a skilled HVAC Technician to install, maintain, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems for residential and commercial properties in the Newark, NJ area. The ideal candidate will have strong diagnostic skills, knowledge of HVAC systems, and the ability to provide excellent customer service while ensuring all work is completed safely and efficiently. Responsibilities • Install, inspect, maintain, and repair HVAC systems and equipment, • Diagnose electrical and mechanical issues with heating and cooling systems, • Perform preventive maintenance and system inspections, • Repair or replace compressors, motors, thermostats, condensers, and other HVAC components, • Test HVAC systems for proper operation and efficiency, • Read and interpret blueprints, wiring diagrams, and technical manuals, • Ensure compliance with EPA, OSHA, and local safety regulations, • Maintain accurate service records, work orders, and inventory, • Respond to emergency service calls when needed, • Communicate professionally with customers regarding repairs and maintenance recommendations Qualifications, • High school diploma or GED required, • HVAC certification or technical training preferred, • EPA Section 608 Certification required/preferred, • Previous HVAC technician experience preferred, • Strong troubleshooting and mechanical skills, • Knowledge of refrigeration systems and HVAC controls, • Ability to work independently and as part of a team, • Valid driver's license with clean driving record, • Ability to lift heavy equipment and work in various weather conditions Preferred Skills, • Commercial and residential HVAC experience, • Experience with rooftop units, boilers, chillers, and furnaces, • Knowledge of smart thermostats and energy-efficient systems, • Excellent customer service and communication skills, • Time management and organizational abilities Work Environment, • Indoor and outdoor work environments, • May require climbing ladders, working in tight spaces, and lifting heavy equipment, • On-call, overtime, and weekend availability may be required depending on workload and emergencies

HVAC Service Sales Representative - Newark, NJ About the Role We’re looking for a driven HVAC Service Sales Representative to help grow our footprint in the Austin market. You’ll focus on building strong client relationships, uncovering new opportunities, and expanding service agreements that keep our customers running efficiently. If you have a background in mechanical service sales, know how to connect with decision-makers, and can position your team as a trusted long-term partner, this is a great fit. Who We Are We’re a leading provider of commercial and industrial HVAC, controls, electrical, and plumbing services. Our team of nearly 700 professionals supports a wide range of facilities including industrial plants, universities, healthcare systems, airports, and distribution centers. We believe success is shared. When our people grow, our customers win—so we invest heavily in both. What We Offer • Competitive weekly pay, • Comprehensive healthcare (medical, dental, vision, free telehealth, and more), • 401(k) with 5% company match, • Life, short-term, and long-term disability insurance, • Up to 4 weeks paid time off plus 9 paid holidays (veterans receive an additional day), • Career development and training opportunities, • Company vehicle or allowance, phone, uniforms, and boot/pants allowance What You’ll Do • Prospect, qualify, and develop new customer relationships, • Schedule and lead client meetings across your territory, • Build and maintain a strong referral and networking base, • Identify client pain points and present tailored HVAC and controls solutions, • Focus on renewable maintenance agreements, sustainability, and digital service offerings, • Deliver proposals and close new business, • Lead customer kick-off meetings and maintain open communication throughout the relationship, • Retain and expand existing service agreements while supporting billing and collections, • Use CRM tools to track performance and report updates, • Execute territory plans that align with company goals What We’re Looking For • 3-5+ years of sales experience, ideally in HVAC or mechanical services, • Strong communication and presentation skills, • Proven success selling maintenance or service agreements, • Ability to interpret technical information and explain it clearly to clients, • Working knowledge of HVAC systems and controls, • Organized, detail-oriented, and self-motivated Work Environment This is a field-based position with daily travel to customer sites. You’ll spend time in mechanical rooms, rooftops, and other facility areas as you meet with clients and assess systems. Regular standing, walking, and light lifting (up to 25 lbs; occasionally up to 50 lbs) are part of the job. If you’re a motivated relationship builder who thrives on helping clients solve problems and creating long-term value, we’d like to talk.

𝗗𝗲𝘀𝗶𝗴𝗻 𝘁𝗵𝗲 𝗽𝗮𝗻𝗲𝗹𝘀, 𝘄𝗿𝗶𝘁𝗲 𝘁𝗵𝗲 𝗰𝗼𝗱𝗲, 𝗮𝗻𝗱 𝗼𝘄𝗻 𝘁𝗵𝗲 𝗳𝗹𝗼𝗼𝗿: 𝗮 𝘀𝗲𝗻𝗶𝗼𝗿 𝗰𝗼𝗻𝘁𝗿𝗼𝗹𝘀 𝗮𝗻𝗱 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗼𝗻 𝗿𝗼𝗹𝗲 𝗼𝗻 𝘀𝗲𝗰𝗼𝗻𝗱 𝘀𝗵𝗶𝗳𝘁 𝗮𝘁 𝗮 𝗳𝗮𝗺𝗶𝗹𝘆-𝗼𝘄𝗻𝗲𝗱 𝗳𝗼𝗼𝗱 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗲𝗿 𝗴𝗼𝗶𝗻𝗴 𝗮𝗹𝗹 𝗶𝗻 𝗼𝗻 𝗿𝗼𝗯𝗼𝘁𝗶𝗰𝘀. 𝗔𝗕𝗢𝗨𝗧 𝗧𝗛𝗘 𝗖𝗢𝗠𝗣𝗔𝗡𝗬 Pave Talent is recruiting on behalf of our client, a privately held, family-owned food manufacturer in Totowa, NJ with over 100 years of combined management experience. They produce for a portfolio of well-known national food service and retail brands from a single, modern facility. The company has roughly doubled its production capacity in three years and is investing hard in robotics and next-generation automation. A robotic palletizer is already installed, with vision inspection on the way. This is a confidential search. 𝗧𝗛𝗘 𝗥𝗢𝗟𝗘 You report to the Engineering Manager and are the senior controls and automation engineer on second shift, 3:00 PM to 12:00 AM. This is a builder's role, not a babysitting role. Yes, you keep production running on your shift. But the bigger half of the job is project work: designing electrical control panels, writing PLC code from the ground up, and standing up new automation. The plant has a real pipeline of capital projects, and you will have your hands on all of it. 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨'𝗟𝗟 𝗢𝗪𝗡 • Design and build electrical control panels for capital projects, from layout and component selection through schematics (AutoCAD Electrical or similar), • Write and commission PLC code from scratch on Rockwell Studio 5000 and ControlLogix, not just modify what already exists, • Lead controls and automation upgrades for production equipment and a plant-wide automated transport system rewrite, • Run the floor on second shift: troubleshoot VFDs, burner controllers, conveyors, point-level sensors, operator interfaces, and networking, and resolve it yourself, • Drive the HMI migration from FactoryTalk View SE to Ignition Perspective and the ongoing ISA-101 standardization, • Support a growing robotics and end-of-line automation roadmap, including the new robotic palletizer and upcoming vision inspection, • Integrate automation systems with the company's Plex ERP platform, • Partner with the first-shift engineering team on cross-shift projects and clean handoffs 𝗪𝗛𝗢 𝗪𝗘'𝗥𝗘 𝗟𝗢𝗢𝗞𝗜𝗡𝗚 𝗙𝗢𝗥 This role needs a genuine controls and electrical engineer, someone who can both design the electrical side and program it. If your background is PLC code only, or troubleshooting only, this is not the right fit. The interview is hands-on and technical, and it will surface the difference. • 3 to 5+ years in controls or automation engineering at a manufacturer, system integrator, or machine builder, • PLC programming from scratch: you have built programs from a blank slate, not only modified or troubleshot existing code. Rockwell Studio 5000 and ControlLogix is the platform here., • Electrical depth: you design control panels, read and trace electrical and safety schematics on the floor, and can size a control or motor circuit, • A real self-starter who can run a shift unguided. The Engineering Manager put it plainly: "We're looking for someone that's more of a self-starter and can do things unguided.", • You can speak to your own project work with specifics: the platform, the application, and what you personally built, • Authorized to work in the US without sponsorship, and able to work fully on-site in Totowa, NJ 𝗔𝗕𝗢𝗨𝗧 𝗦𝗘𝗖𝗢𝗡𝗗 𝗦𝗛𝗜𝗙𝗧 Let's be straight about the schedule, because for the right person it is the best part of this job. Second shift, 3:00 PM to 12:00 AM, means you own the floor. You are the senior automation decision-maker on site, nobody looking over your shoulder, and every fix and every project on your shift carries your name. For a senior engineer tired of being one of five and waiting for project scraps, that is the whole appeal. It is also a calmer build environment: fewer meetings, fewer interruptions, real heads-down time for panel design and code. Your mornings are genuinely yours, for appointments, family, or the gym, with no early alarm, and the commute skips rush hour in both directions. You will not be dropped in cold. You ramp with the Engineering Manager and the first shift before the shift is fully yours. On-call coverage is part of the job, and once in a while that means a weekend. When it does, you get that time back. There is no overtime pay; the flexibility runs both ways. If you want ownership and visibility, second shift is the fastest way to get there here. 𝗡𝗜𝗖𝗘 𝗧𝗢 𝗛𝗔𝗩𝗘 • Ignition Perspective, or other SCADA experience, • FactoryTalk View SE/ME, • AutoCAD Electrical or EPLAN for panel and schematic design, • Machine safety: safety relays, GuardMaster or GuardLogix, Safe Torque Off, • VFD configuration and commissioning (Allen-Bradley PowerFlex or similar), • ERP integration experience (Plex or similar), • Bilingual English and Spanish, a plus for second shift, not required 𝗖𝗢𝗠𝗣𝗘𝗡𝗦𝗔𝗧𝗜𝗢𝗡 𝗔𝗡𝗗 𝗕𝗘𝗡𝗘𝗙𝗜𝗧𝗦 𝗕𝗮𝘀𝗲 𝗦𝗮𝗹𝗮𝗿𝘆: Up to $125,000 (Potentially more for highly qualified candidates) 𝗕𝗼𝗻𝘂𝘀: performance-based, historically up to 15% at year-end 𝗦𝗰𝗵𝗲𝗱𝘂𝗹𝗲: second shift, 3:00 PM to 12:00 AM 𝗢𝗻-𝗖𝗮𝗹𝗹: rotating, with comp time for weekend coverage, no overtime pay 𝗪𝗼𝗿𝗸 𝗠𝗼𝗱𝗲𝗹: fully on-site in Totowa, NJ, easily reached from most of Northern NJ 𝗖𝘂𝗹𝘁𝘂𝗿𝗲: family-owned and tight-knit; strong performers get direct visibility to upper management, and internal mobility is real 𝗛𝗢𝗪 𝗧𝗢 𝗔𝗣𝗣𝗟𝗬 Apply through LinkedIn and we will be in touch. This is a confidential search; your application is fully private. 𝗣𝗮𝘃𝗲 𝗧𝗮𝗹𝗲𝗻𝘁 | 𝗛𝗶𝗿𝗶𝗻𝗴 𝗥𝗲𝗶𝗺𝗮𝗴𝗶𝗻𝗲𝗱

CONSTRUCTION MANAGER Overview The Construction Manager plays a pivotal role in overseeing day-to-day construction activities, ensuring compliance with released-for-construction documents, and coordinating all work impacting existing AirTrain operations. This role demands a hands-on leader who can balance technical expertise, particularly in electrical systems, with stakeholder coordination to ensure safety, quality, and on-time delivery. The Construction Manager will be full-time, on-site at the project site from NTP (Construction) until First Passenger Service, and part-time thereafter until Final Acceptance and closeout. Qualifications • Education: Bachelor’s degree in engineering, architecture, construction management, or related field (Electrical Engineering strongly preferred)., • Experience:, • Minimum 15 years of construction management experience., • At least one major transit, rail, or airport design-build project with a capital value ≥ $100M., • Strong electrical experience: medium voltage power distribution systems, gas insulated switchgear (GIS), and PSE&G interface., • Licenses/Certifications: Professional engineering or architectural license, or relevant construction certification, preferred., • Other: Familiarity with PANYNJ projects and ability to pass background/badging requirements at EWR Airport., • Light rail and/or people mover systems including electrical experience / power distribution systems. Some experience working for the actual contractor (not just owner side consulting) is preferred. Responsibilities • Manage scope, schedule, budget, safety, and quality of major rail/transit projects., • Coordinate engineering and inspection services; maintain strong client and subcontractor relationships., • Oversee all work impacting AirTrain operations, ensuring direct coordination with the Existing AirTrain Operator., • Lead constructability reviews, change order negotiations, and independent cost estimates., • Review schedules, proposals, invoices, requisitions, and purchase orders., • Manage contractor access/protection requests and ensure compliance with safety regulations., • Act as the owner’s representative in project meetings, presentations, and stakeholder coordination., • Provide oversight on electrical systems integration (MV distribution, GIS, utility interface)., • Lead project teams, ensuring smooth execution and resolution of claims and disputes. Minimum Requirements • 15+ years relevant CM experience., • Proven record on large, complex, lump-sum projects., • Strong background in electrical power systems for transit/rail., • Excellent communication and negotiation skills., • Ability to work independently and proactively manage field conditions., • Must be able to commute to EWR Airport. If you meet these requirements and are ready for a challenging and rewarding role, we invite you to apply. Be part of a dynamic team shaping the future of transportation and construction. Our benefits include Medical, Dental, and Vision Insurance Comprehensive health coverage to ensure employees and their families receive quality healthcare protection. 401(k) Retirement Plan Competitive retirement savings program with up to 4% company matching, helping employees build long-term financial stability. Flexible Work Schedule Empowering employees with the ability to balance work and personal life through adaptable working hours and potential remote work options. Additional Insurance Benefits Life insurance to provide financial protection for employees' loved ones Pet insurance to support employees' furry family members Paid Time Off Flexible time off to promote work-life balance and employee wellness

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • Participate in on-call rotations as needed Qualifications • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Strong customer service and communication skills Preferred (but not required) • Ductless/VRF experience, • NATE certification Compensation & Benefits • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Location: Paterson, NJ Field Service/Installation Technician at Benco Dental At Benco Dental, our company is our family, and we are looking for a new addition to assist us in Driving Dentistry Forward. Please review the description below carefully to ensure that this position is the perfect match for you! What's in it for YOU? Excellent Compensation Packages Medical, Dental and Vision Benefits Effective on Day 1 401k Package, Paid Time Off Program, and Profit Sharing Associate Discounts and Community Giveback Programs College Tuition Savings Program Caring Family Culture Toward all Associates Certified as a FORTUNE Great Place to Work Opportunities to Build a Better Benco through Diversity and Inclusion Resource Groups Family owned for 90+ years Position Summary: The Field Service/Installation Technician is a vital part of our company providing hands-on support to our customers. Service Technicians are independent team players who want to be customer focused. As the Service Technician, you will offer solutions to our clients that extend beyond repairs and maintenance to exemplify our number one goal: driving dentistry forward. Benco Dental offers service technicians career development and will provide a strong sense of accomplishment. Do YOU Possess These Skills and Attributes? Computer proficiency, including knowledge of Windows-based programs Organizational skills Problem solving skills Exceptional communication skills No Bio-Medical (dental) Device repair experience? No problem! Other relevant experience includes: Mechanical or Technical experience/education Electrical, Customer service, Military, or Software/hardware experience Pneumatics HVAC Do These Responsibilities Interest YOU? Providing maintenance and repair services out in the field Training staff on using equipment Training customers on using equipment Do YOU Meet These Requirements? High School Diploma or equivalent Valid driver's license and clean driving record (Required) Technical training in the bio-medical or electronics field (Preferred) Physical: Routine walking, bending, kneeling, and squatting, sitting, standing, reaching, and twisting Must frequently lift/lower/carry/push/pull 1 to 55 pounds, occasionally lift/lower/carry/push/pull 56 to 100 pounds Position requires routine pushing, pulling, grasping and manual dexterity in the use of hands, arms and shoulders Able to work in tight spaces Frequent travel to customer sites (daily) and occasional use of power tools The base pay range of $21.63-25.00/hour represents the low and high end of the hiring salary range for applicants that meet the minimum qualifications (tech in training). Actual salaries will vary and may be above or below the range based on factors including but not limited to location, experience, and performance. The hiring range listed is just one component of our total compensation package for employees. Other financial rewards may include bonuses, profit sharing, and Paid Time Off. Who We Are: It's our Mission to Drive Dentistry Forward Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930-a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states. We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. These services are supported by over 400 professionally trained sales representatives and 300 factory-trained service technicians who begin every task by asking "What does the customer want?" If you enjoy working for a progressive company, who is committed to diversity in our workforce, who values all customers and associates, who also provides the opportunity for growth and development- we encourage you to learn more about our Benco family. We are looking for driven professionals who want to play a key role in our future success, while making a positive impact within our industry. Thank you for your interest in Benco Dental. We look forward to hearing from you! We're proud to be an equal opportunity and affirmative action employer. At Benco Dental we celebrate our associates' differences to foster a culture of diversity and inclusion every day. Click here to learn more about how we promote Equal Opportunity and Diversity and Inclusion at Benco. *This position is a field-based / territory-based / virtually- based / remote-based position that does not require consistently reporting to a physical Benco location.

Title: BME Adjunct - FED Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments, and examination of student learning. Learn and use online course management system - Moodle. Provide time during the week to meet with students outside of class (ie office hours). Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in electrical or biomedical engineering or related field required. Preferred Qualifications: Ph.D. preferred with previous college teaching experience. Industrial experience is an added advantage. At the university's discretion, the education and experience prerequisites may be excepted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience in electrical or biomedical engineering specifically preparing the candidate for success in the position. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off About the Role: Join Anderson Electrical Contracting as an Electrician Mechanic and become part of a dedicated team in Cedar Grove, NJ! We are looking for skilled professionals who are passionate about electrical work and eager to contribute to our reputation for excellence. Responsibilities: • Install, maintain, and repair electrical systems and equipment in residential and commercial settings., • Diagnose electrical issues and provide effective solutions to ensure safety and functionality., • Read and interpret blueprints, schematics, and technical drawings., • Collaborate with other tradespeople and contractors to complete projects on time., • Ensure compliance with local electrical codes and safety regulations., • Perform routine inspections and preventative maintenance on electrical systems., • Provide excellent customer service and maintain positive client relationships., • Stay updated on industry trends and advancements in electrical technology.Requirements:, • Valid New Jersey Electrical License or equivalent certification., • Minimum of 3 years of experience in electrical installation and repair., • Strong knowledge of electrical systems, codes, and safety practices., • Ability to work independently and as part of a team., • Excellent problem-solving skills and attention to detail., • Strong communication skills and a customer-focused attitude., • Willingness to work flexible hours, including evenings and weekends if necessary., • Must possess a valid driver's license and reliable transportation.About Us: Anderson Electrical Contracting has been serving Cedar Grove, NJ, for over 15 years, delivering top-notch electrical solutions to our valued customers. Our commitment to quality workmanship and customer satisfaction has made us a trusted name in the community, and we pride ourselves on fostering a supportive and rewarding work environment for our employees.

Job DescriptionAt Power-Flo Technologies, you’ll be part of a fast-paced, hands-on warehouse environment that plays a critical role in keeping electrical and industrial projects moving. As a Warehouse Associate / Driver, your work will directly support customers by ensuring materials are accurately picked, safely handled, and delivered on time. Monday - Friday, 7:30 AM - 4:30 PM Benefits: • Health, Dental and Vision benefits, • Overtime Opportunities, • PTO Program, • Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) $17 - $19/hour Warehouse Associate and Driver Key Responsibilities : • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving, organizing etc., • Maintain a clean Driver's License, • Pull and stage orders for shipment, • Safely and efficiently pick up and deliver orders, • Load, unload, prepare, inspect, and operate delivery vehicles (Van, small box truck, rack truck), • Plan delivery route to maximize efficiency and productivity for the day, • Obey all traffic laws and parking regulations, • Organize and barcode inventory, • Cycle Count Warehouse Associate and Driver Requirements : • 2+ years of warehouse experience required, • Current, valid driver’s license (7 years clean driving record) to operate company vehicles, • Ability to obtain & maintain DOT certification, • Ability to lift 50 pounds and push or pull over 100 pounds, • Ability to follow processes, procedures, and policies, • Ability to work well independently, have a great attitude, and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Computer savvy, • Box Truck experience (16-18 ft) and Flatbed truck experience is a plus. No CDL required., • Forklift experience a plus Physical Requirements • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out www.powerflotechnologies.com/careers

Job Description Overview Pay: $20 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Weekdays and weekend availability Location: Store(s) will be assigned based on commutable distance. Must be available to work in multiple assigned retail stores within designated territory. Part-time and full-time opportunities available A.J. Perri Plumbing, Heating, and Cooling is the nation’s largest provider of residential HVAC, plumbing, and electrical services, with more than 7,000 professionals and over 45 years of experience helping homeowners improve comfort, efficiency, and reliability in their homes. We are hiring In-Store Brand Ambassadors to work inside national home improvement retail stores promoting HVAC services, system tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer: • Weekly pay via direct deposit, • Uncapped Commission paid on top of hourly rate, • Paid training, • Career path into HVAC Sales Advisor roles, • Flexible part-time and full-time schedules Full-time employees also receive: • Insurance available after 31 days, • Low-cost medical (as low as $5/week), • Dental, vision, HSA/FSA, • 401(k) with company match, • Paid time off + holiday pay, • Company-paid life insurance Responsibilities As an In-Store Sales Representative and Lead Generator, you will engage with retail shoppers and introduce them to A.J. Perri heating and air conditioning services. This role supports lead-generation, brand-awareness, and customer education while scheduling in‑home consultations or HVAC services. • Act as a retail Brand-Ambassador, representing ARS with professionalism and enthusiasm., • Serve as a Promotions Specialist explaining service options, system upgrades, and comfort improvements, • Function as a Lead-Generator and Appointment Setter, scheduling in‑home consultation and tune ups with service technicians and comfort advisors, • Note: this role is not door-to-door, does not canvass, and does not function as a canvasser Qualifications What You Need • Positive and energetic personality with strong people skills, • Comfortable approaching and speaking with customers in a retail environment, acting as a product-consultant and support lead-generation efforts, • Retail, kiosk, Door-to-Door, or sales experience preferred (not required), • Ability to stand and walk during shifts, • Weekend and some holiday availability, • Reliable transportation, • Clean, professional appearance representing the ARS brand, • Ability to attend weekly in-office meetings, • Employment is contingent on a background check in accordance with applicable law For questions about the role, you may contact our management team at 732-689-6449 or 732-939-9288 This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: https://www.ars.com/privacy-policy.

Title: Pre-College Hourly Teacher Department: Pre-College Programs Reports To: Director for Program Operations and Outreach Pre-College Programs Position Type: Staff Position Summary: The Center for Pre-College Programs is in need of STEM Teachers for various Engineering based Saturday and Summer 2026 instruction. The teacher will work with high achieving students in various STEM related classroom instruction. Teacher / Instructor provides inquiry-based, product-oriented instruction for the students that will enhance students' knowledge, understanding and application of Science, Technology, Engineering and Mathematics (STEM) content/concepts, study skills, thinking skills, problem solving strategies and communication skills. Currently seeking teachers for the following subjects and grade levels for Saturdays and Summer Program 2026 : • Computer Science - grades 5-11, • Robotics - grades 5-11, • English Language Arts - grades 5-8, • Mathematics - grades 5-11, • Environmental, mechanical, industrial, civil, biomedical, electrical, and computer engineering, • Physical education grades 5-11, • College and Career Readiness Teacher/Counselor Essential Functions: • Works collaboratively with appropriate program staff on the content of the instructional program and related activities., • Provides a teaching plan or class outline, with handouts, for assigned classes that adhere to the guiding principles of the Early College Preparatory Programs. -Noties the Program Directors if they must be absent or late for any reason. Prerequisite Qualifications: • Teacher Certication., • Background Check., • Must be a certied elementary, middle or high school teacher in the content area assigned and/or an equivalent combination of training and experience., • Possesses good leadership abilities and communication skills., • Experienced in hands-on activities and cooperative learning and teaching., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $50.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Title: Adjunct Instructor - SAET Department: School of Applied Engr & Tech Reports To: Chair Position Type: Faculty Position Summary: The Department of Engineering Technology has an ongoing need for Adjuncts, each teaching up to two undergraduate courses in either Construction Engineering Technology (CET), Concrete Industry Management (CIM), Construction Management Technology (CMT), Computer Technology (CMPT), Electrical and Computer Engineering Technology (ECET), Mechanical Engineering Technology (MET), Medical Informatics Technology (MIT), Manufacturing Engineering Technology (MNET) and Surveying Engineering Technology (SET) for the upcoming semester(s). Essential Functions: Teach one or two undergraduate courses for the Fall, Spring or Summer semesters, as assigned by the individual Program Coordinators. Both day and/or evening sections are available. Prerequisite Qualifications: Minimum qualifications include a MS in Construction/Civil, Electrical, Computer, Mechanical, Medical Informatics, Manufacturing, or Surveying Engineering, or in a closely related field. Preferred Qualifications: -Prior teaching experience is preferred. Full-time industrial experience in a job related to CET, CIM, CMPT, CMT, ECET, MET, MNET, MIT or SET. Bargaining Unit: UCAN-Adjunct Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: BME Adjunct - Graduate Courses Department: Biomedical Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Department of Biomedical Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Engineering Physiology, Biomedical Signal Processing, Neural Engineering, and Advanced Biomaterials Characterization. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Biomedical Engineering or related field such as Electrical, Chemical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: Hourly Research Analyst Department: Computer Science Reports To: Associate Professor Computer Science Position Type: Staff Position Summary: The goal of this position is to develop responsible data management algorithms for ranking and recommendations.: Applicants must have strong background in data management and algorithm design, data mining, applied machine learning, as well as in development and implementation. Essential Functions: • Conducting research and development. Additional Functions: • Presenting at conference. Prerequisite Qualifications: • PhD in Computer Science, Electrical Engineering, Data Science., • At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: PhD in Computer Science Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $50.00(USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Title: Research Assistant Department: Civil & Environmental Engineering Reports To: Professor Position Type: Staff Position Summary: Perform literature search on management of used electrical vehicle batteries, visit facilities handling used electrical vehicle batteries. Essential Functions: Ability to search on the internet, talk to individuals. Prerequisite Qualifications: -Bachelors in Engg preferably background with EV Batteries. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate/range for this position is $20.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

Adjunct Instructor - ECE Department: Electrical and Computer Engineering Reports To: Department Chair Position Type: Faculty Position Summary: The Helen and John C. Hartmann Department of Electrical and Computer Engineering has an ongoing need for Adjunct Professors to teach a variety of undergraduate and graduate courses in the area of Electrical Engineering or Computer Engineering with focus in Photonics, Nano and Quantum Materials and Devices (PNMD), Communication, Signal Processing and Machine Intelligence (CSM), Computer Systems and Networking (CSNW), Energy, Power Systems, and Sustainability (EPSS) or Robotics, Intelligent Systems, Data Engineering (RID). Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and examination of student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: M.S. degree in Electrical Engineering, Computer Engineering or related field. At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Title: CME Adjunct Professor Department: Chemical & Materials Engineering Reports To: The Department Chair Position Type: Adjunct Position Summary: The Department of Chemical and Materials Engineering has an ongoing need for Adjunct Professors to teach a variety of graduate courses in the area of Chemical Engineering, Materials Engineering, and Pharmaceutical Engineering. Essential Functions: Develop and deliver lectures, prepare and grade assignments, design laboratory experiments (if needed), and assess student learning. Learn and use online course management system - Canvas. Submit grades to the registrar at the end of the semester. Prerequisite Qualifications: Ph.D. degree in Chemical or Materials Engineering or related field such as Biomedical, Electrical, and Mechanical Engineering; At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience. Preferred Qualifications: Industrial experience is an added advantage. Ph.D. preferred with previous college teaching experience. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job DescriptionBenefits: • Health insurance, • Paid time off, • Vision insurance Property Groundskeeper /Maintenance Palmyra Harbour Condominium Association Join our team at Palmyra Harbour Condominium Association and help maintain a beautiful waterfront community along the Delaware River. We are seeking a dependable, hard-working Property Maintenance Laborer to assist management and maintenance staff in maintaining the grounds, buildings, clubhouse, and common areas throughout the community. This position is ideal for someone who enjoys working with their hands, takes pride in keeping a property looking its best, and is comfortable performing a variety of indoor and outdoor tasks. Pay Range: $17$19 per hour Responsibilities Responsibilities include, but are not limited to: • Conduct daily property drive-throughs to remove trash and bulk items and maintain the overall appearance of the community., • Perform general cleaning and upkeep of common areas, grounds, buildings, sidewalks, and exterior areas., • Assist with painting, door refinishing, caulking, and minor repairs to buildings and common areas., • Help with basic plumbing and electrical tasks under the direction of maintenance staff., • Perform gutter cleaning and other ladder work, including trimming low tree branches and reaching elevated areas. Must be comfortable working at heights and using ladders safely., • Assist with landscape improvement projects, including removal of overgrown shrubs, small trees, and ivy, spot seeding grass, and seasonal property clean-up., • Help with asphalt and concrete patching to repair walkways and driveways., • Load and unload tools, equipment, and materials into work vehicles as needed., • Maintain a clean, organized, and stocked maintenance shop., • Complete assigned work orders, service requests, and special projects in a timely manner., • Update work orders in AppFolio with notes and photos, as directed., • Clean and maintain the clubhouse, including setting up and breaking down tables, chairs, and equipment for resident events and meetings., • Assist with snow and ice removal from sidewalks and common areas during winter weather., • Report safety concerns, property damage, and maintenance issues to management promptly., • Work cooperatively with management, residents, contractors, and fellow maintenance staff.Qualifications, • Ability to perform physically demanding work, including standing, bending, climbing, lifting, carrying, pushing, and pulling at least 50 pounds., • Ability to work indoors and outdoors in all weather conditions., • Must be comfortable working on ladders and at heights., • Dependable, organized, self-motivated, and willing to learn., • Ability to follow directions and work independently or as part of a team., • Strong communication skills and a professional attitude when interacting with residents, management, contractors, and the Board of Trustees.The following skills are a plus, but are not required:, • Experience with painting, door refinishing, caulking, and general building maintenance, • Basic plumbing and electrical knowledge, • Experience with asphalt or concrete patching, • Landscaping or groundskeeping experience, • Snow removal or plowing experience, • Familiarity with AppFolio or similar work order softwareEducation and Experience, • High school diploma or equivalent preferred., • Previous maintenance, landscaping, construction, laborer, or similar experience preferred but not required., • Valid drivers license with a clean driving record preferred., • Must be able to pass a background check.Schedule and Benefits This is a permanent, full-time position working Monday through Friday, with occasional overtime as needed. Benefits include: • Paid Time Off (PTO), • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • On-site tools and equipment providedPlease send resume to phcaharbourdrive@gmail.com.

Job Description Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns. MMS Group is seeking an experienced Building Maintenance Technician for a 194-unit residential property located Newark, New Jersey. Key Responsibilities: Regular Maintenance: Maintain residential apartment homes and other areas on the property, including building exteriors, interiors, and public areas, regularly. Repairs: Perform small appliance, plumbing, electrical, and other repairs in residential apartments and other areas of the property. Installation: Install tile and laminate flooring Emergency Response: Take part in the on-call rotation schedule, responding to emergency calls according to the company's policy on after-hour emergency calls Unit Turnover: Manage the turnover of empty apartment units, including repairs (e.g., sheetrock, taping, sanding, painting, and fixing doors, windows, light fixtures, etc.). Additional Duties: Perform other duties as outlined in the job description. Desired Skills: Independence: Able to work in a challenging environment with minimal direction. Problem-solving: Solution-based thinking skills are highly valued. Organizational Skills: Ability to work independently, organize tasks, multitask, manage time, and prioritize tasks Communication: Excellent verbal and written communication skills Customer Service: Great customer service skills are needed. Requirements: Experience: Three+ years of residential multifamily property management/apartment maintenance. Education: High School Diploma or equivalent Skill: experience with electrical, plumbing, and HVAC License: valid driver’s license Certification: Fire Safety Tools: Possession of basic tools needed to perform routine maintenance tasks. Physical Requirements: Physical aspects of the job may require heavy lifting, bending, kneeling, stooping, climbing, balancing, and carrying Computer Skills: Proficient in Microsoft Office (Word, Excel, Outlook). About Us: For fifty years, MMS Group and its affiliates (Arco Management and TUC Management) have been dedicated to quality property management. Our growing portfolio exceeds 40,000 residential units and includes affordable housing cooperatives, subsidized rental properties, supportive housing, and conventional apartment buildings. Our clients include progressive building owners, governmental agencies, real estate entrepreneurs, financiers, not-for-profit organizations, and cooperative and condominium boards. While each community and client are unique, each share our singular commitment to excellence. Why join our Team? We invite you to join our growing team of dedicated professionals in a high-tech environment. We offer competitive salaries, benefits, and opportunities for growth and advancement through continuous training and education programs. Contact us today to see how you can achieve your MMS Edge. Perks and Benefits: MMS Group believes in a healthy work-life balance. Keeping our employees in mind, here is a list of a few benefits we offer: Paid Holidays: 12 paid holidays per year. Paid Time-Off: Up to 2 weeks PTO in the first year, increasing with tenure. Healthcare Plans: Comprehensive Medical, Dental, and Vision plans available after 60 days of employment. Health Reimbursement Account: Up to $3K per calendar year. Life Insurance: Company-paid life insurance. Retirement Savings: Company-matched 401(k) retirement savings plan. Certifications and Licensing: Company-paid certifications and licensing. And much more! Are you the person we’re looking for? Apply now. Visit us at www.mmsgroup.com for more details! #INDNE Equal Opportunity Employer

Job Description Maintenance Mechanic/Building Maintenance Technician Direct hire! Hours: Monday - Friday 3:30PM-12AM (w/ some OT based on workload) Pay: $29-$34/hr (based on experience) OVERVIEW Responsible for performing maintenance and repairs on processing equipment, production equipment, and all aspects of building maintenance. RESPONSIBILITIES • Perform scheduled and unscheduled maintenance of mixers, pumps, tanks, piping and Manufacturing/Production support systems., • Troubleshoot, repair, rebuild, or replace gearboxes, drive motors, VFD’s, and PLC’s., • Daily checks of ph meters, stability chambers, ovens, water treatment equipment, exit signs and emergency lighting., • Maintain all aspects of building maintenance such as lighting, HVAC, air compressors, chillers, boilers, plumbing, cleaning, painting, light carpentry and snow removal., • Assemble, install and/or repair wiring, electrical and electronic components, machinery, production lines and industrial equipment, including (forklifts, power jacks etc.), • Maintain log books and maintenance checklists for all equipment and fire safety apparatus., • Maintain and monitor inventory of maintenance supplies, replacement parts, cleaning supplies, and office supplies., • Identify and resolve building maintenance, equipment repairs and safety issues and follow through to completion., • Complete tasks requested by work orders and individual requests., • Perform other related duties as assigned SKILLS & ABILITIES • Must have basic English oral, written and communication skills., • Electrical, mechanical and plumbing installation and repair skills., • Working knowledge of power tools and machine shop equipment., • Strong troubleshooting skills with the ability to make required repairs., • Basic Math skills required., • Boiler and chiller repair skills and prior experience in preventive maintenance systems., • Organized and efficient in time management skills., • Ability to organize and manage multiple priorities., • Ability to work in a team environment, as well as independently on assigned projects., • Ability to professionally interact with outside maintenance contractors when required., • Capable of following all required SOP’s (Standard Operating Procedures) and safety programs. PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical Demands: While performing duties of job, employee is occasionally required to stand, walk (for several hours of the workday) and use hands to handle objects, tools and controls, reach with hands and arms; talk and hear. Employee may be required to move or lift objects exceeding (50 lbs.) Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Work environment: While performing the duties of this job, the employee may be exposed to weather conditions prevalent at the time. The noise level in the work environment is usually minimal. EDUCATION / TRAINING • High School diploma or GED equivalent required. Minimum of 5-7 years of general machine and building maintenance.A combination of vocational training, education and experience that is equivalent to the employment standards listed above and provides the required knowledge, skills and abilities.Company DescriptionJob&Talent, is an international leader in 3PL, distribution, food production, call center, professional, and manufacturing staffing. We provide temporary workers to a variety of industries needing a flexible and dynamic workforce. Why work with us? Because we promote the highest standards of integrity, quality, and mutual respect to our clients and staff. When you work with us, you are part of something and valued for your commitment and contributions to the goals of our clients. We commit to paying weekly and always put safety at the heart of everything. Are you interested in stable employment, competitive salaries, and growth opportunities? As part of the Jobandtalent family, we have reached over 10 countries, served over 2500 clients, and employed over 340,000 people. Join the world’s leading digital staffing agency today – We promise it’s worth a conversation to make a positive difference in your life! Let’s start your next job adventure together. Job&Talent, is proud to be an equal opportunity workplace and is an affirmative-action employer. We are committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status.Job&Talent, is an international leader in 3PL, distribution, food production, call center, professional, and manufacturing staffing. We provide temporary workers to a variety of industries needing a flexible and dynamic workforce. Why work with us? Because we promote the highest standards of integrity, quality, and mutual respect to our clients and staff. When you work with us, you are part of something and valued for your commitment and contributions to the goals of our clients. We commit to paying weekly and always put safety at the heart of everything. Are you interested in stable employment, competitive salaries, and growth opportunities? As part of the Jobandtalent family, we have reached over 10 countries, served over 2500 clients, and employed over 340,000 people. Join the world’s leading digital staffing agency today – We promise it’s worth a conversation to make a positive difference in your life! Let’s start your next job adventure together.\r\n\r\nJob&Talent, is proud to be an equal opportunity workplace and is an affirmative-action employer. We are committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status.

Job DescriptionDescription: A large not for profit organization in Newark is seeking a part time, experienced maintenance staff member responsible for multiple sites which provides daily janitorial, maintenance and repair work. Key responsibilities include: • Ensuring that the properties are kept in top condition at all times;, • Address general maintenance and repairs improvements, • Operating machinery, equipment and supporting systems at all commercial and residential properties, • Repair projects including identifying the needs of the properties: Plumbing, and Painting, • General Building Floor Care: (dust/wet mopping/ stripping and waxing), • Gardening- Planting, weeding and leaf removal, • Snow Removal shoveling and salting, • Providing response in emergencies as needed;, • This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties or responsibilities that management may deem necessary. Background and experience • Minimum of 5+ years’ experience in a similar role with a good work history ;, • Possess plumbing, carpentry, and electrical skills/experience;, • Ability to lift up to 50lbs;, • Mechanically inclined, highly organized and detail oriented;, • Reliable, courteous, friendly, hardworking and professional;, • Must be available to assist in after-hours emergency situations; Education: High School Diploma or Equivalent certificate Drivers License required Hourly rate :$20.00 Requirements:

Job Description Munich Airport NJ LLC is a US-based subsidiary of the German Airport Operator Munich Airport. Munich Airport NJ LLC is responsible for the operations, maintenance, and concession management of Terminal A at Newark Liberty International Airport (EWR)! We are looking for an experienced and creative; Maintenance Planner/CoordinatorThe Maintenance Planner/Coordinator role involves supporting all physical infrastructure and maintenance tasks within the responsibility of the Terminal Operator. As the primary contact for internal and external customers, this position provides daily support to the FM team and contractors. The role also includes monitoring the health and performance of critical Terminal Assets and managing key building systems. Additionally, this position serves as the first responder and investigator for any technical issues in the building, coordinating efforts to recover operations. You will join a team of four Planners who rotate duties at Terminal A's operation center, covering 16 hours a day, 7 days a week. You will also work alongside maintenance contract managers, overseeing vendors and contractors and taking over small technical projects.Your Future Responsibilities • Establish schedules and work orders for Planned Maintenance and ensure stakeholders are informed accordingly., • Monitor execution, receive reports on executed PM Work Orders, and validate that information is accurately logged into the CMMS system (Maximo)., • Ensure events/incidents are logged into the CMMS system, addressed, and resolved per SLAs using standard work order procedures., • Inform and collaborate with relevant stakeholders if an event requires their involvement., • Implement measures in response to alerts received from Facility Maintenance systems., • Oversee regular planned and ad-hoc inspections., • Monitor all KPIs and SLAs to ensure compliance., • Supervise subcontractors' performance in planned and reactive maintenance, coordinating with management as necessary., • Generate shift and daily reports as required., • Contribute to reporting and analysis to identify trends, suggest condition-based maintenance actions, and enhance ITOCC Operations., • Ensure proper maintenance of all documentation related to Work Order Execution., • Serve as the first point of resolution whenever possible., • Monitor SCADA, the building management system, and other FM software statuses and take appropriate action to address faults through corrective work order management., • Carry out root cause analysis for recurring issues and suggest preventive measures to avoid future recurrence., • Assist in developing and reviewing maintenance strategies and procedures to improve efficiency and minimize downtime., • Ensure compliance with all safety regulations and standards from our subcontractors and external vendors during maintenance and construction activities., • Lead and manage emergency technical response teams during critical incidents.Your Education & Training, • Bachelor's Degree in Electrical or Mechanical Engineering with 5 years in Facilities Management and Maintenance or Technical Associate Degree with 10 years in the same field., • Preferably, 2 years of experience within the aviation sector within the Facilities Maintenance Organization., • Prior knowledge of CMMS systems such as Maximo and Building Management Systems is advantageous., • Good experience with HVAC systems, Building Management Systems, and other facilities maintenance software monitoring programs.Your Skills & Experience, • Excellent organizational skills., • Strong verbal and written communication skills., • Exceptional attention to detail and accuracy., • Ability to interpret and record data accurately, ensuring high-quality data integrity., • Excellent customer service skills., • Ability to multitask and work effectively in a fast-paced environment., • Proficiency in using tact and diplomacy in challenging situations., • Ability to adapt to changing conditions and make decisions accordingly., • Strong analytical skills for reviewing and interpreting data., • Team player who works collaboratively towards common goals., • Ability to work independently, taking responsibility and ownership of tasks., • Capacity to establish and maintain professional relationships across various project levels., • Experience in a large, complex airport environment is an asset., • Eagerness for feedback and continuous learning in a mission-driven environment., • Possesses a strong sense of integrity, openness, fairness, and transparency.Compelling Reasons to Join Our Airport Family, • Be part of a team that embraces diversity, fosters collaboration, practices mentorship, and values a positive, healthy work climate., • Play a key role in enhancing Munich Airport's reputation in the U.S., • Experience a dynamic international working environment., • Enjoy an attractive benefits package: Health, Vision, Dental, 401(k) Matching, LTD/STD, Life Insurance, PTO. The base salary range for this role is $33.00 to $35.00 per hour. Base salary is part of our total rewards package which also includes the opportunity for annual salary increases and bonuses. Employees are eligible for them and eligible dependents to enroll in medical, dental, vision and Employee Assistance Plan (EAP) benefits as of DAY 1. Employees are also eligible for our 401(k) plan, which includes a company match, after six months of service. The employer also provides life and disability insurances and leaves provided in line with NJ and federal law. Our robust time-off policy includes paid time off and 12 paid holidays. Total compensation, including base salary to be offered, will depend on elements unique to each candidate, including candidate experience, skills, education and other factors permitted by law. Munich Airport US Holding and its subdivision Munich Airport NJ LLC are equal opportunity employers. Munich Airport NJ LLC Terms and Conditions: 1. MANJ will only contact you via SMS to follow up on job applications and schedule interviews., 2. You can cancel the SMS service at any time. Just text "STOP" to the short code. After you send the SMS message "STOP" to us, we will send you an SMS message to confirm that you have been unsubscribed. After this, you will no longer receive SMS messages from us. If you want to join again, just sign up as you did the first time and we will start sending SMS messages to you again., 3. If you are experiencing issues with the messaging program you can reply with the keyword HELP for more assistance, or you can get help directly at {support email address or toll-free number}., 4. Carriers are not liable for delayed or undelivered messages, 5. As always, message and data rates may apply for any messages sent to you from us and to us from you. You will receive {message frequency}. If you have any questions about your text plan or data plan, it is best to contact your wireless provider., 6. If you have any questions regarding privacy, please read our privacy policy below. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR SqBMPEfLJ9

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Associate Maintenance Manager HelloFresh is seeking a Maintenance Manager who will oversee the maintenance and reliability for our growing sites and equipment. You will take a hands-on approach to leadership, effectively engaging, motivating, and coaching team members. The Maintenance Manager needs to be strong in project management, leadership, and technical skills related to manufacturing equipment, HVAC, and general maintenance. You will... • Oversee M&RE-related processes including maintenance of automation and manufacturing equipment, electrical, refrigeration, PIT equipment (forklifts), building, grounds, and overall upkeep of multiple buildings, • Motivate, engage, coach, and inspire a team of associate managers and technicians, creating a positive team dynamic that encourages all employees to provide feedback and drive change from within, • Provide project management support, • Manage outside vendors and facilitate planned and unplanned repairs, • Ensure that maintenance regulations are followed, • Maintain a current list of contractors to ensure that all emergency repairs are handled, • Collaborate with other departments within the distribution center to identify problems and brainstorm improvement ideas, • Promote food safety, quality, and a safety-first culture., • Backfill Associate Maintenance Manager role when needed (call off, PTO requests). You are • Customer Centric: You are passionate about delivering on commitments to your customers, • Bold: you have passion and grit; you're not afraid to give feedback to your team and your manager, • Agile: you roll with the punches and dont get overwhelmed easily, you adapt quickly to change and know how to deliver results in a fast-paced, autonomous environment, • Decisive: You realize when making a decision is as important as the time it takes to make that decision, • Problem-solver: you understand there is not a one-size-fits-all approach when problem-solving; you think outside the box and enjoy grinding away at issues to find a solution At a minimum, you have... • Minimum 5 years' experience managing facilities maintenance/operations and reliability within the Food/Beverage/Perishables/Distribution industry, • Bachelor's Degree preferred; high school diploma or GED required, • High level of integrity and ethics with excellent follow-through, • Knowledge of OSHA regulations and compliance, • Able to read and interpret blueprints, manuals, and schematics, • Exposure to mechanical, electrical, automation and refrigeration systems, • Comfortable working in cold environments with some areas of facility at 40F, • Excitement for working in a start-up environment with a high level of ambiguity and change, • Effective communicator for employees, direct reports, cross-functional teams, and senior leadership, • Flexibility to work weekends, holidays and/or nights Youll get • Competitive salary, 401k with company match that vests immediately upon participation, and company equity plan based on role, • Generous PTO, including sabbatical, and parental leave of up to 16 weeks, • Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment, • Tuition reimbursement for continuing education (upon 2 years of service), • Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_), • Access to 7 different Employee Resource Groups (ERGs) including those for BIPOC, women, veterans, parents, and LGBTQ+, • Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. Your decision to redact this information will not adversely affect the consideration of your application. We evaluate all candidates based on their skills, qualifications, and experience.?Please be aware that should you receive a conditional offer of employment, we may be required to request this information for legally permissible purposes, such as verifying eligibility for employment or for benefits administration and background checks. We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Companys commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on and . HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: _, • APAC: _, • United States: _, • Canada: _

Title: Hourly Data Analyst Department: Electrical and Computer Engineering Reports To: Professor Position Type: Staff Position Summary: Heat is an inherent part of gasoline-powered (e.g., engines), or sustainable generators (e.g., solar, or wind). Heat is also generated from wastelands and the project aims at using the, otherwise wasted thermal energy, as an additional electrical resource. The project studies thermo-cells as means to generate electricity - these are the chemistry version of solid-states thermo-electric cells. Essential Functions: -Perform electrochemical wet-laboratory work on Thermo-cells. -The candidate should be able to fabricate electrochemical cells by laying out thin films and characterize them by taking electronic data. Prerequisite Qualifications: -The candidate ought to have an UG or graduate degree in Chemistry or Chemical Engineering with wet-lab experience, preferably in electrochemistry of Thermo-cells. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $16.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

As a Mechanic, you will work with your team to service and repair all fleet vehicles. • Shift: 2 pm – 10 pm, M – F, slightly flexible Responsibilities: • Perform preventive maintenance and repairs on all company vehicle types per company policy., • Diagnose and repair mechanical, electrical, and HVAC systems., • Document all vehicle repair and inspection information using our maintenance software program., • Perform inventory and order parts, supplies, as needed., • Maintain a clean and safe work environment per company standards. Performance Requirements: • Required operational knowledge of diesel equipment and tools normally associated with the troubleshooting and repairs of gasoline and diesel truck equipment., • Knowledge of International diesel medium-duty trucks as well as Ford gas and diesel engines is preferred., • Must be able to accurately perform preventive maintenance to fleet vehicles, have the ability to identify component failures, worn or damaged parts, diagnose and troubleshoot vehicle systems, and produce quality repairs., • Ability to read and understand technical service manuals, repair orders, labels, and gauges., • Must possess a valid driver’s license (C or better) and meet qualifications as outlined in section 391 of the Federal Motor Carrier Safety regulations., • Unrestricted ability to walk, stand, bend, stoop, squat, lift (up to 50 lbs.), push, pull, climb, and lie on back in a horizontal position for prolonged periods of time., • Ability to communicate verbally using telephone for ordering parts and supplies as need., • Ability to hoist any size vehicle with lift device (vehicle jack) using foot and arm pumping motion., • Work is performed in a heated enclosed structure. Environment involves chemical handling,, • gasoline/diesel fumes and intermittent high noise exposure., • Full-time schedule consists of a minimum 40-hour work week., • Must meet DOT standards to achieve brake and annual inspection certifications. A minimum of 1 year experience or a certificate from an approved training program., • Basic hand tools required., • ASE or manufacture certification is a plus. As part of the qualification process for the Mechanic position, a Human Performance Evaluation (HPE) is required. This evaluation requires successful completion of testing in the following areas: * • Lift:, • 25lbs vertical lift from 10 inches to 66 inches from the floor (1X), • Lift-Carry:, • 8lbs vertical lift from 1 inch to 44 inches from the floor, and horizontally transfer 15ft (4X), • -18lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 300ft (1X), • -50lbs vertical lift from 10 inches to 36 inches from the floor and horizontally transfer 2ft (2X), • Push-Pull:, • Horizontally transfer 47lbs of force on a sled (single, non-dominant arm), a distance of 1ft (2X), • Repetitive Coupling:, • Squeeze Jamar Hand Dynamometer requiring forces up to 30lbs / both right & left hands (4X each) Benefits: Loomis offers one of the most comprehensive employees benefit packages in the industry, which includes: • Vacation and Sick Time (PTO) as well as Paid Holidays, • Health & Dental Insurance, • Vision Insurance, • 401(k) Plan, • Basic Life Insurance Plan, • Voluntary Life Insurance Plan, • Flexible Spending and Health Savings Account, • Dependent Care Account, • Industry leading Training and Development Loomis is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Job Description GOJET AIRLINES - A&P LICENSED MAINTENANCE TECHNICIAN LOCATION - NEWARK, NJ The GoJet Airlines' A&P Maintenance Team plays a vital role in ensuring the safety of our passengers and is a key driver of the airline's operational performance. We are looking for highly qualified, Licensed Mechanic Technicians to fill positions at our Chicago-O'Hare International Airport Line Maintenance Base. As an A&P Licensed Maintenance Technician at GoJet Airlines, you will be responsible for the inspection, repair, and maintenance of our aircraft to ensure they meet the highest standards of safety and performance. You will work closely with other maintenance personnel to troubleshoot and resolve issues, perform routine inspections, and comply with all regulatory requirements. QUALIFICATIONS/REQUIREMENTS: • Must hold an FAA Airframe and Power plant license, • Legal right to work in, and travel freely in and out of, the United States, • Must possess a minimum of high school diploma or equivalent, • Must possess a valid driver‘s license, • Legally operate company vehicles and equipment with no restrictions, • Must be able to provide your own tools, • FCC License Helpful, but not required, • DOT required pre-employment drug test, • TSA required fingerprint check for Criminal History Records Check, • Must be able to work any shift, • Must be able to read and converse fluently in English, • Must be able to lift 50 lbs., • Able to stand for extended periods of time, • Able to climb stairs, ladders, and work platforms, • Able to kneel, bend, and sit KEY RESPONSIBILITIES: • Aircraft Maintenance:, • Perform scheduled and unscheduled maintenance on aircraft, including engines, landing gear, avionics, and other critical components., • Conduct thorough inspections to identify and address potential issues before they become problems., • Troubleshooting and Repairs:, • Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment., • Repair or replace defective parts, ensuring all work is completed to regulatory and company standards., • Compliance and Documentation:, • Ensure all maintenance activities comply with FAA regulations, company policies, and industry standards., • Accurately document all maintenance work performed, including parts used, repairs completed, and inspections conducted., • Collaboration and Communication:, • Work closely with other maintenance technicians, engineers, and flight operations personnel to ensure seamless and efficient aircraft operations., • Provide clear and concise communication regarding maintenance issues and status updates. COMPENSATION: • Industry leading pay scale $26.71/hr -$49.20/hr • Generous annual pay increase, • Performance bonuses, • "Promote from Within" philosophy BENEFITS: • Health, dental & life Insurance, • 401(k) retirement plan, • Airline travel benefits, • Discounts on cruises, hotels, rental cars, and more About GoJet Airlines: GoJet Airlines operates as a regional partner for United Airlines, providing daily flights across the U.S. and Canada. Our commitment to safety, customer service, and operational excellence has established us as a leader in the regional airline industry. Join our team and be a part of our exciting journey in the aviation world!

Job Description We're not just hiring a mechanic — we're hiring someone who wants to own the shop. Metro Ambulance is a fast-moving EMS operation in North Jersey. Our fleet keeps people safe every single day. We need someone who takes that seriously, stays organized, and is hungry to grow into a lead role. If you're the type who likes things done right the first time and can't stand a messy bay — keep reading. The Opportunity This is a ground-floor role with real upward potential. You'll start by mastering our fleet — gas and diesel rigs, preventive maintenance, inspections, and repairs. As you learn our operation and prove your reliability, you'll take on more responsibility, more authority, and more pay. We want someone who's eager to grow fast and eventually run this shop. If you show up organized, skilled, and ready to work — we'll invest in you. What You'll Do Everyday • Preventive maintenance and inspection across our full fleet, including:, • Change engine oil & filters, Check braking & suspension systems, • Inspect fuel & cooling systems, Check transmission fluid & engine mounts, • Drive shaft, CV joints, belts & hoses, • Perform regular tune-ups, Inspect electrical systems, • Rotate & inspect tires, wheels, rims, Examine exhaust & undercarriage, • Check all lights, frame & body, Inspect glass, mirrors & wipers, • Verify seat belts, horn & auxiliary systems, Repair fluid leaks, Maintain accurate maintenance logs Who We're Looking For • Experienced with gas AND diesel engines — 6.0 a strong plus, • Organized. Seriously organized. A messy bay is a dealbreaker., • Safe, responsible, and takes ownership of their work, • Hungry to learn, grow, and take on more responsibility over time, • ASE certification is a plus — not required if your skills speak for themselves, • Valid NJ driver's license and reliable transportation to Nutley, NJ, • Ability to maneuver up to 150 lbs with provided equipment, • At least 1 year of hands-on mechanic experience Schedule • Full-Time Monday – Friday with Weekend availability required — all vehicles are available to service on Saturdays and Sundays, • Overtime and on-call availability are part of the role as needed Compensation & Benefits • $20.00 – $25.00/hr based on experience — with room to grow as you do, • Health insurance (full-time employees, waiting period may apply), • 401(k), • A real path to shop lead — not just a title, a role with authority and pay to matc

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: RF Test Technician Job Description This role focuses on the design, development, documentation, and production support of RF and Microwave components, including active and passive devices, for the telecommunications industry. The RF Test Engineer performs hands-on testing, troubleshooting, and optimization of RF components and systems across prototype and production stages, ensuring high performance and reliability for a growing portfolio of products. Responsibilities • Design, develop, and document RF and Microwave components, including active and passive devices, for telecommunications applications., • Follow established RF test procedures and accurately complete detailed test reports for all tested products., • Troubleshoot and optimize discrete power amplifier modules and low noise amplifiers (LNAs) at both prototype and production stages., • Define and construct RF test setups to measure VSWR, gain, group delay, phase variation, IP3, P1dB/P3dB compression points, noise figure, and harmonics for narrowband and broadband high-power amplifiers., • Perform RF testing using network analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Define and construct test setups to measure VSWR, insertion loss, group delay, and phase variation for passive filtering products., • Test, characterize, and optimize Distributed Antenna Systems (DAS) related equipment such as bi-directional amplifiers and tower-mounted amplifiers for public safety and carrier applications., • Read, interpret, and work from electronic and mechanical blueprints to support testing and troubleshooting activities., • Communicate technical information clearly and professionally with internal teams and clients., • Manage multiple tasks and priorities simultaneously while adapting quickly to changes in production requirements., • Document new RF designs and test configurations to support future repeat orders and ongoing production., • Perform component-level troubleshooting and board repair using oscilloscopes, spectrum analyzers, network analyzers, and other test equipment., • Use test equipment and tools, including microscopes, to support detailed inspection, soldering, and rework activities., • Apply strong electronics and electrical knowledge to analyze schematics, PCB layouts, and test results., • Maintain accurate records of test results, issues, and corrective actions to support continuous improvement. Essential Skills • 3–5 years of hands-on experience in testing and optimizing active and passive discrete RF components., • Strong RF testing experience using network analyzers, spectrum analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Proficiency in defining and building RF test setups to measure VSWR, gain, group delay, phase variation, IP3, compression points, noise figure, harmonics, and other key RF parameters., • Experience in testing and optimizing power amplifier modules and low noise amplifiers (LNAs) in both prototype and production environments., • Ability to test and characterize passive RF filtering products, including measurement of VSWR, insertion loss, group delay, and phase variation., • Full understanding of Distributed Antenna Systems (DAS) and the ability to test and optimize bi-directional and tower-mounted amplifiers for public safety and carrier systems., • Component-level troubleshooting skills for RF and electronic assemblies, including board-level repair., • Ability to read and interpret electronic and mechanical blueprints, schematics, and technical drawings., • Proficiency with general electronic test equipment such as oscilloscopes, network analyzers, spectrum analyzers, and other laboratory instruments., • Strong electronics and electrical fundamentals, including practical experience with PCB-level diagnostics and soldering., • Ability to read and speak English and interpret documents such as safety rules and operating procedures., • Strong interpersonal and communication skills, with the ability to work effectively within a team and independently., • Proficiency with Microsoft Office applications for documentation, reporting, and communication. Additional Skills & Qualifications • Experience documenting new RF designs and test configurations for repeat production orders., • Experience working within a structured RF test engineering or RF test technician team., • Ability to communicate technical concepts clearly to both technical and non-technical stakeholders, including clients., • Strong organizational skills with the ability to manage multiple tasks and shifting priorities in a production environment., • Attention to detail in test execution, data recording, and reporting., • AutoCAD experience or familiarity is a plus for working with mechanical drawings and layouts., • Experience using microscopes and fine-pitch soldering techniques for board-level rework is beneficial., • Demonstrated ability to contribute to continuous improvement in test processes and product performance., • Comfort working in a growing organization introducing new RF and Microwave products. Work Environment The RF Test Engineer works as part of a dedicated RF Test Technician and Engineering team, collaborating closely with test engineering and design engineering leadership. The environment is laboratory and production oriented, with daily use of RF test equipment such as network analyzers, spectrum analyzers, power meters, noise figure meters, oscilloscopes, and microscopes. The role involves hands-on work at test benches and production lines, supporting both prototype development and volume manufacturing. The organization is experiencing significant growth, introducing new RF and Microwave products, which creates opportunities to support new designs, improve processes, and contribute to the expansion of the business. The culture emphasizes teamwork, clear communication, adherence to safety rules and operating procedures, and a balance of independent and collaborative work. Job Type & Location This is a Contract to Hire position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $25.00 - $33.65/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on May 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Now Hiring: Electro-Mechanical Maintenance Specialist (Industrial Operations) We’re seeking a skilled Maintenance Technician to join our fast-paced, high-performing team. This is a full-time role with a typical schedule of 40+ hours per week, with opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You’ll Do: In this hands-on role, you’ll be essential to keeping our industrial laundry operations running smoothly. You’ll maintain and service key equipment—including washers, dryers, ironers, conveyors, boilers, and air compressors. Using your knowledge of preventative maintenance and advanced troubleshooting, you’ll help reduce downtime, improve efficiency, and ensure our facility operates at peak performance. What You'll Do • Diagnose and repair: Troubleshoot electro-mechanical, pneumatic, and hydraulic systems; identify root causes and execute corrective repairs with minimal supervision., • Electrical work: Read and interpret schematics, ladder logic, and wiring diagrams; install and terminate control wiring up to 480V three-phase., • Preventive maintenance: Perform scheduled PM tasks on motors, drives, PLCs, conveyors, robotics, and automated assembly equipment per manufacturer and internal standards., • Documentation: Maintain accurate maintenance logs, work orders, and parts usage records in the CMMS (Computerized Maintenance Management System)., • Safety & compliance: Adhere to all OSHA, NFPA 70E, and site-specific lockout/tagout (LOTO) and arc flash procedures; participate in safety audits., • Continuous improvement: Identify recurring failure modes and recommend process or equipment modifications to reduce downtime and improve reliability., • Team support: Provide guidance and on-the-job training to Technician I team members; collaborate with engineering on capital projects and equipment commissioning., • Uphold equipment standards following manufacturer and company guidelines., • Engage in expansion, renovation, and cost-saving projects as needed., • Operate comfortably with pneumatic, steam, and hydraulic schematics., • Demonstrate proficiency in electronic and electrical capabilities., • Exhibit hands-on experience with PLCs, motors, and electrical circuits., • Understand pneumatics, compressed air systems, and hydraulic systems., • Navigate industrial-sized boilers and steam systems confidently., • Repair various pump styles (water and air)., • Operate forklifts and scissor lifts., • Tackle outdoor work, even in inclement weather., • Occasionally travel and work comfortably at heights.Qualifications, • Minimum 18 years old., • Associate degree or technical certificate in Electro-Mechanical Technology, Industrial Electronics, or related field, • 3–5 years of hands-on electro-mechanical maintenance experience in a manufacturing or industrial environment, • Demonstrated proficiency in AC/DC motor controls, variable frequency drives (VFDs), and control panels, • Experience with PLC-based systems and the ability to interpret ladder logic, • Proficiency reading electrical schematics, P&IDs, and mechanical drawings, • LOTO certification and NFPA 70E Electrical Safety awareness, • Ability to lift up to 50 lbs and work in varied conditions including heights and confined spacesBenefits, • Competitive hourly rate based off relatable skillset., • Great work schedules., • Enjoy paid time off, holidays, and comprehensive health, dental, and vision insurance., • Secure your future with a 401k featuring a generous company match., • Additional perks include company-paid life and disability insurance, provided uniforms, and exciting advancement opportunities., • Career advancement pathway to Technician III Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Pest Control Technicians do? The primary purpose of this role is to perform our industry leading pest management services for residential customers. You will be responsible for identifying and eliminating pests from residential properties by conducting thorough inspections, determining the type of pest infestation, applying appropriate treatments like pesticides and traps, and providing preventative measures to prevent future infestations, all while adhering to safety regulations and communicating with clients about pest control solutions. Responsibilities include but are not limited to the following: Conduct thorough inspections of client properties to identify signs of pest infestations, damage, and entry points Apply approved pest control products, including chemicals, baits, and traps, to effectively eliminate pests while adhering to safety standards Educate customers on pest prevention methods and the importance of maintaining a pest-free environment. Provide advice on how to reduce the risk of future infestations. Build relationships with customers, schedule and confirm their appointments, help with sales to current customers, and expand our product to new customers Ensure that all pest control equipment is properly maintained, stocked, and in good working condition Adhere to all local, state, and federal regulations regarding pest control products and safety protocols Drive and safely operate a company provided service vehicle (we provide routine maintenance) Essential Job Functions: Working in tight, confined spaces such as basements, attics, crawl spaces, narrow aisles, or passageways Working around animals, insects and termites You’ll sometimes be working around mechanical parts, vehicles, electrical current, heights and scaffolding, fumes, dust, and chemicals, and we’ll train you how to handle all of these conditions safely Able to work both inside and outside in your local climate in company-provided weather gear Lots of moving around — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling, up and down stairs, ladders, scaffolding, ramps, and poles You’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator What do you need? Clean shaven face- for safety reasons (rebreathers have to be able to seal your face) High school diploma or GED; related experience and/or training; or equivalent combination of education and experience Possess a valid driver’s license from state of residence. Licenses/certificates as required by federal, state, and/or local regulations (covered by us) Available to work Monday-Friday and weekends as needed Open to learning and becoming knowledgeable in all areas of pest control Solid reading, writing, and verbal communication skills Basic math skills — You’ll need to be able to follow instructions for mixing on product labels Customer-facing experience preferred #ZipRTX Base Pay RangeHourly: $18.00 - $21.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. Company DescriptionEhrlich has been providing expert pest control services to homeowners and businesses since 1928. We offer customized, effective and fast pest control solutions which include fumigation, bed bug control, and termite control - all provided by local offices throughout the east coast from Maine to Florida.Ehrlich has been providing expert pest control services to homeowners and businesses since 1928.\r\n\r\nWe offer customized, effective and fast pest control solutions which include fumigation, bed bug control, and termite control - all provided by local offices throughout the east coast from Maine to Florida.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: This role is ideal for an engineer who is comfortable wearing many hats, solving urgent production issues, and working directly with toolmakers, CNC machinists, quality personnel, and production teams. The successful candidate will act as a technical problem-solver on the manufacturing floor, with a strong focus on progressive tooling, CNC manufacturing methods, root-cause analysis, quality improvement, and production support. This is not a desk-only engineering role. The position requires someone who can move between engineering, quality, the tool room, and production to identify problems, develop practical solutions, and keep manufacturing running efficiently. Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Requirements: Key Responsibilities: 1. Manufacturing & Production Support: • Provide hands-on engineering support for day-to-day production issues., • Troubleshoot manufacturing problems related to tooling, CNC machining, part quality, and process stability., • Work directly with operators, toolmakers, machinists, and production supervisors to resolve urgent shop-floor issues., • Evaluate production methods and recommend improvements to increase efficiency, repeatability, and throughput., • Support corrective actions when production parts do not meet dimensional, cosmetic, or functional requirements., • Assist with setup optimization, process validation, and manufacturability improvements. 1. Tooling & Tool Room Support: • Support the tool room with troubleshooting and improvement of progressive tooling and related production tooling., • Assist in identifying tooling wear, failure modes, alignment issues, and design-related problems., • Recommend tool modifications, repairs, or process changes to improve part quality and tool life., • Collaborate with toolmakers to develop practical solutions for active production problems., • Review tooling designs and provide engineering input for improvements, maintenance, and manufacturability. 1. CNC & Manufacturing Engineering: • Help determine effective CNC machining approaches for production components, tooling, fixtures, and secondary operations., • Work with CNC machinists/programmers to improve machining strategy, fixturing, tooling selection, and process reliability., • Support fixture design, tooling concepts, and process development for machined components., • Analyze machining-related issues such as tolerance variation, tool wear, chatter, setup errors, and cycle-time inefficiencies., • Recommend improvements to CNC processes that support quality, cost, and delivery goals. 1. Quality Control & Continuous Improvement • Apply quality control experience to investigate dimensional issues, nonconformances, and customer concerns., • Support root-cause analysis and corrective/preventive action activities., • Use inspection data to identify trends and recommend engineering or process changes., • Work with Quality Control to ensure parts meet drawings, specifications, and customer requirements., • Assist in developing or improving inspection methods, control plans, work instructions, and process documentation., • Promote practical continuous improvement initiatives across engineering, tooling, CNC, and production 1. Documentation & Cross-Functional Communication: • Read and interpret engineering drawings, tolerances, specifications, and manufacturing documentation., • Create or revise work instructions, process notes, inspection criteria, and engineering documentation as needed., • Communicate clearly with shop-floor personnel, quality staff, engineering, and management., • Document technical findings, corrective actions, and recommended process improvements., • Support engineering change activities when tooling, process, or product updates are required. Non-Essential Responsibilities: • Performs other duties as directed. Position Qualifications And Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others, • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills And Abilities: Required Qualifications: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related technical field preferred., • Equivalent hands-on manufacturing, tooling, CNC, or quality experience may be considered., • Experience in a manufacturing environment with direct shop floor involvement., • Working knowledge of progressive tooling, tool room operations, CNC machining, and production troubleshooting., • Quality control experience, including inspection methods, dimensional analysis, and corrective action support., • Ability to read and interpret mechanical drawings, GD&T, tolerances, and technical specifications., • Strong mechanical aptitude and practical problem-solving ability., • Comfortably working in a fast-paced production environment and responding to urgent issues., • Ability to communicate effectively with machinists, toolmakers, inspectors, operators, and management., • Proficiency with Microsoft Office and basic engineering documentation. Preferred Qualifications: • Experience with stamped, coined, precision metal, or small-component manufacturing., • Experience supporting progressive dies, punch tooling, fixtures, jigs, and production tooling., • CNC machining knowledge, including milling, turning, tooling selection, fixturing, and setup troubleshooting., • Familiarity with CAD software such as PTC Creo, AutoCAD, or similar., • Knowledge of GD&T and precision inspection equipment., • Experience with root-cause analysis tools such as 5 Why, fishbone diagrams, corrective actions, and process audits., • Exposure to ISO 9001, AS9100, IATF, or similar quality systems., • Experience in a high-mix, fast-paced manufacturing environment. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Perform other related duties as assigned. Required Skills/Abilities: • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain in good standing order, as per TSA’s TWIC criteria. Education and Experience: • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Minimum of 3 years of experience in a manufacturing or industrial environment. Travel Requirements: • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • A valid driver's license and reliable transportation. Physical Requirements: • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA., • Work environment frequently changes from office settings to standing, climbing, and working in a plant environment under varying weather and climate conditions. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description We are seeking a dedicated Electrical Control Engineer to lead the design and development of industrial automation systems for web processing machinery. This role focuses on creating high-performance electrical control equipment and advanced software solutions in a stable, long-term engineering environment. Responsibilities Design and develop electrical control systems, PLC software, HMI interfaces, and servo programs for industrial machinery. Provide electrical design and programming based on existing PID algorithms and motion control requirements. Install and provide technical support for PLC based hardware and software systems. Inspect, install, troubleshoot, and debug machinery throughout the manufacturing process and prior to shipment. Perform internal acceptance testing and support Factory Acceptance Testing and Site Acceptance Testing. Manage equipment startup at client sites with domestic and international travel of approximately 15 percent. Coordinate with international customers which may require interface during off-normal hours. Design electrical panels and integrate control components into final machinery designs. Estimate project costs, reliability factors, and safety requirements. Generate detailed electrical panel layouts, electrical schematics, and Bills of Materials for component procurement. Collaborate with purchasing and manufacturing teams to facilitate system assembly and parts procurement. Determine project specifications by analyzing product design, customer needs, and performance standards. Maintain and update engineering drawings, electrical schematics, and technical documentation for new and existing equipment. Execute projects effectively both as part of a collaborative team and as an independent contributor. Qualifications Bachelor of Science or Bachelor of Arts degree in Electrical Engineering is required. Minimum of 5 years of experience in electrical controls engineering or industrial automation. Direct experience with Allen Bradley PLCs and FactoryTalk View software. Proficiency with Lenze VFDs including 8400 and 9400 series. Strong background in motion control, servo motors, AC/DC motors, and tuning PID loops. Expertise in industrial networking, including switches, routers, and Ethernet I/P protocols. Experience designing power distribution systems for 220VAC and 480VAC industrial environments. Working knowledge of electrical design standards including UL, NEMA, and CE codes. Familiarity with equipment safety codes, SIL ratings, and the use of safety PLCs and relays. High proficiency in AutoCAD or equivalent electrical design software. Advanced skills in Microsoft Office Suite for technical documentation and project tracking. Compensation & Benefits • Competitive compensation package, • Health insurance, • 401(k) retirement plan, • Life and disability insurance, • Paid time off (PTO), • Stable, long-term career opportunity, • Salary Position, $100,000 – $120,000 depending on relevant experience

Job DescriptionFamily owed Medium-Heavy Duty Truck Repair Company currently seeking a Class A or B Diesel Technician to become an integral part of our team! You will diagnose and repair Medium and Heavy Duty Diesel engine vehicles of all makes and models and their systems. If you are seeking a career in an organization that offers growth and treats people with respect, Apply today! Responsibilities: • Diagnose and repair various makes/models of diesel engines and transmissions as well as chassis and body control systems, • Perform routine vehicle inspections and maintenance, • Inspect and test vehicles for necessary adjustments, • Help other technicians with jobs as needed, • Diagnosis and repair of all vehicle electrical systems Qualifications: • Minimum 10 year previous experience as a diesel technician, • Knowledge of diagnostic software and equipment, • Knowledge of Diesel engine vehicle and components, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • A valid driver's license with clean driving record. CDL is a Plus!, • Excellent people skills and a professional appearance, • Excellent organizational and time management skills, • A sense of urgency is an absolute essential! Benefits: • Competitive Base Salary w/ Monthly Bonuses, • Comprehensive Health Benefits including Dental Coverage, • Company-paid Life Insurance Coverage, • Paid Holiday and Vacation Program, • 401K Plan, • Growth and Career Opportunities, • Paid Training E04JI800jf5d409561k

Job Description Company Summary Compliance Management International (CMI) is a premier global provider of environmental, health, and safety (EHS) services, serving clients of all sizes for over 30 years. We collaborate closely with organizations, including Fortune 500 companies and governments, to enhance performance by offering integrated support that prioritizes productivity and growth while minimizing risks and ensuring regulatory compliance. Company Offerings At CMI, we believe in building more than just careers—we cultivate a workplace where people thrive. Whether you're looking for full-time stability, part-time flexibility, contract work, or a direct placement opportunity, we offer a variety of career paths to fit your life and goals. Full-time team members enjoy a comprehensive benefits package that includes medical, dental, and vision coverage, a 401(k) with company match, and employer-paid life insurance. We also provide short-term and long-term disability coverage, voluntary life insurance for employees and their families, generous paid time off, 9 paid holidays, and annual performance bonuses. But the benefits don't stop there. We invest in your future with paid training, educational opportunities, and a strong focus on career development. Our inclusive culture, commitment to safety, and appreciation for hard work create an environment where everyone can succeed. No matter your employment type, at CMI, you're part of a team that values integrity, collaboration, and growth. Join us and discover what it means to work for a company that truly values its people. Job Title: Construction Safety Professional Job Summary: Compliance Management International (CMI) is committed to delivering best-in-class safety support across construction projects. Our Construction Safety Professionals partner directly with General Contractors to implement effective safety programs, ensure regulatory compliance, and promote a proactive, site-wide safety culture. This role requires strong field presence, leadership capability, and the ability to collaborate across multiple trades and stakeholders Key Responsibilities: • Serve as a safety resource to the General Contractor, subcontractors, and project team, • Mentor, coach, and train field personnel on OSHA standards, company policies, and industry best practices, • Promote and sustain a positive safety culture through active engagement with workers and site leadership, • Participate in and support daily, weekly, and monthly safety meetings as required by the project, • Conduct routine site safety inspections, audits, and observations; identify hazards and recommend corrective actions, • Lead and support safety processes including pre-task planning (PTP), Job Safety Analyses (JSAs), permit programs, and incident investigations, • Facilitate new hire orientations, toolbox talks, and task-specific training, • Monitor compliance with OSHA 29 CFR 1926 standards and site-specific safety requirements, • Prepare and maintain accurate safety documentation, reports, and metrics for project leadership Requirements & Experience: • Minimum of 5+ years of construction safety experience, preferably supporting a General Contractor, • Strong working knowledge of OSHA construction standards (29 CFR 1926), • Experience working in complex, fast-paced construction environments (data center or mission critical experience may be added as needed), • Working knowledge of high-risk activities (e.g., electrical safety, fall protection, confined space, crane operations, etc.), • Proven ability to influence and collaborate with field teams, supervisors, and management, • Strong hazard recognition, risk assessment, and problem-solving skills, • Effective verbal and written communication skills, • Proficiency with Microsoft Office and/or safety management systems Education & Certifications: • OSHA 30-Hour Construction Certification (required, within the last 5 years), • CHST Certification Required, • 24-Hour Hazwoper, • First Aid, CPR, and AED Certification (required), • Degree in Occupational Health & Safety or related field preferred Physical Requirements & Work Conditions: This position requires active field presence on construction sites. Duties include standing, walking, climbing ladders, working at heights, entering confined spaces, and navigating uneven terrain throughout the workday. The role may involve lifting up to 30 lbs. and working in varying weather conditions, including extreme heat, cold, wind, or precipitation. Reasonable accommodations will be considered in accordance with applicable regulations. Additional Requirements: • Ability to work flexible hours, including overtime, based on project needs, • Reliable transportation and residence within a reasonable commuting distance (project-specific travel/per diem to be defined as needed) New JerseyState & Local Laws Statewide Law EFFECTIVE: JAN. 1, 2020 Employers may not screen applicants based on their pay history. LEARN MORE Jersey City EFFECTIVE: APRIL 13, 2022 All employers in the city with five or more employees must disclose the minimum and maximum salary, or hourly wage, and benefits for each job, promotion or transfer opportunity. New Jersey$100,000—$110,000 USD Equal Opportunity Employer Compliance Management International (CMI) is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other legally protected status. Position Disclaimer This job description is intended to provide a general overview of the responsibilities and requirements of the role. It is not an exhaustive list and may be subject to change at any time to meet the needs of the organization. Management reserves the right to assign or reassign duties and responsibilities as necessary. Click here to learn more about Compliance Management International (CMI)

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com.What You'll Do: Our Data Center Facilities team is at the forefront of the shift to the Intelligence Age, re-engineering the physical layer to support the unprecedented power and thermal demands of next-generation AI hardware, such as NVIDIA's H100 and Blackwell architectures. We are a high-impact, cross-functional group of technical experts dedicated to solving complex infrastructure challenges, from transitioning suites to 80kW+ per-rack densities to implementing advanced liquid-cooling methodologies. In this role, you will collaborate with MEP consultants and operational stakeholders to manage multi-million-dollar retrofits, ensuring our physical infrastructure remains a catalyst—not a bottleneck—for global AI ambitions. We thrive on technical precision and mission-critical reliability, building the foundation for the next era of computing. About the role: • As our Staff, Data Center Augmentation Engineer, you will be the bridge between our current infrastructure and the future of AI. You will lead the engineering efforts to upgrade, expand, and optimize our data center footprint to support high-density AI workloads. This isn't just about keeping the lights on—it's about re-engineering the power and cooling envelopes to accommodate the next generation of compute.Who You Are:, • Expansion Coordination: Lead the technical planning and execution of data center augmentations and retrofits, where we are adding load into existing spaces., • High-Density Design: Work with the design and capacity teams to complete the design and planning for power expansions. and oversee the implementation of power and cooling solutions specifically for AI hardware., • Infrastructure Strategy: Evaluate existing electrical and mechanical capacities to determine the feasibility of 50kW–100kW+ rack densities., • Vendor & Project Management: Coordinate with MEP (Mechanical, Electrical, and Plumbing) consultants, general contractors, and hardware vendors to ensure projects are delivered on time and within "mission-critical" tolerances., • Risk Mitigation: Conduct Method of Procedure (MOP) and Standard Operating Procedure (SOP) reviews to ensure augmentations do not disrupt existing live operations., • Education: Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or a related technical field., • Experience: 10+ years in Mission Critical Operations (Data Centers, Hospitals, or Semiconductor Plants)., • Technical Knowledge: Deep understanding of UPS systems, backup generators, and switchgear., • Experience with advanced cooling methodologies (CRAH, Chilled Water, Liquid Cooling)., • Familiarity with Data Center Infrastructure Management (DCIM) tools., • Project Leadership: Proven track record of managing multi-million dollar infrastructure build-outs or retrofits., • Ability to travel approximately 30% to data center locations globally.Preferred: (if applicable), • Communication: The ability to effectively convey complex Data Center power and cooling requirements to diverse operational stakeholders., • AI Hardware Familiarity: Demonstrated understanding of the spatial, power, and thermal management requirements for high-density AI accelerators (e.g., NVIDIA H100s/B200s or comparable architectures)., • Certifications: Relevant industry certifications, such as a Professional Engineer (PE) license or a Certified Data Center Professional (CDCP), are preferred. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love to solve complex "mission-critical" puzzles, like retrofitting live infrastructure to meet the massive power and cooling demands of the AI era without disrupting operations., • You're curious about the future of hardware, specifically how emerging technologies like liquid cooling and high-density rack architectures (50kW–100kW+) will redefine data center design., • You're an expert in navigating the electrical and mechanical chain—from transformer capacity and PDU limitations to translating technical requirements for diverse operational stakeholders.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $177,000 to $237,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption Our Workplace While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionSalary: $55 per hour Join the Jetvia Team Jetvia has provided world class executive jet charter services for over 35 years, built on the pillars of safety, dependability, and transparency. We pride ourselves on delivering a refined travel experience that prioritizes the security and time of every guest. We believe in supporting our team members first so they are empowered to provide exceptional service to our clients. We operate with an ownership mindset where accountability is the standard and egos are left at the door. If you are a professional who values a safety first foundation and thrives in a culture of mutual respect, we invite you to help us lead the next chapter of our history. The Role The Mobile Support Aircraft Technician will perform a variety of aircraft modifications and maintenance functions on aircraft. Duties include advanced troubleshooting, removal and installations of airframe components, landing gear, engine components, electrical components, control systems and any other maintenance requirements required to return aircraft to service. What You'll Do • Communicate effectively with scheduling, flight crews, Technical Support, vendors, and leadership., • Perform maintenance and servicing of all aircraft mechanical and avionics systems., • Demonstrate the ability to work independently to perform assigned maintenance and avionics tasks., • Responsible for coordinating/ordering, receiving and inspecting all tooling and materials needed to service the aircraft, prior to use/installation., • Responsible for inspecting the MSU truck, tools for calibration/operation, stocking levels and hazmat., • Arrange the shipment of all core units and tooling back to the proper location., • Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paperwork in a timely manner., • Ensure that all work accomplished meets quality standards, maintenance manual and company policies., • Establish and maintain a professional working relationship and promotes the Jetvia brand positively when interacting with others., • Properly identify (tags) parts and equipment. Stores aircraft components and other property securely and safely., • Operate and supervise use of special support equipment used in removal and installations of major components., • Coordinate with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft., • Provide regular updates on aircraft status and all support activity to Maintenance Control and leadership, as needed., • Be Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining a professional attitude., • Responsible for maintaining company training requirements. Qualifications: Required • Valid FAA Airframe and Powerplant license, • Valid Drivers License, • 4+ years combined experience in inspection, maintenance or servicing of corporate type aircraft, • 2+ years Lear 60 aircraft experience, • Advanced knowledge of inspection and maintenance procedures for the noted aircraft model and systems., • Excellent communication skillsespecially in high-pressure situations, • Strong organizational and multi-tasking ability, • Availability for flexible scheduling and on-call rotation, • Proficient in Microsoft Word, Excel, and PowerPoint Preferred • AOG/Mobile experience Who Thrives at Jetvia • People who live our values in their day-to-day work., • Problem-solvers who make confident decisions., • Detail-focused professionals who thrive in a fast-paced environment., • Team players who support others and celebrate wins together. Why Join Jetvia? • Be part of a fast-growing, high-performance operation., • Work with a team that values safety, humility, and ownership., • Competitive pay + on-call and holiday incentives., • Opportunities to grow your aviation career in a supportive environment. How Jetvia Supports You Jetvia recognizes our team members as our greatest asset. We offer a foundation of efficiency and professionalism with a comprehensive benefits package designed to support your career and well-being. • Compensation and 401(k):We offer a 401(k) safe harbor match: dollar for dollar up to 3% of pay, and 50 cents on the dollar for the next 2%. Employees are eligible to enroll on the first of any month and are immediately 100% vested in all matching contributions, • Medical Coverage: Three plan options including a 100% employer paid High Deductible Health Plan (HDHP) as well as 85% employer paid PPO plan and Texas-based HMO plans, • Additional Benefits Offerings: Dental, Vision, and Life insurance are included in our complete insurance package ATI Jet, Inc. is an equal opportunity employer and reviews applicants without regard to race, color, religion, sex, age, national origin, handicapped, or veteran's status. Employment with ATI Jet Inc. is contingent upon pre-employment drug testing, background checks and post-offer, job-related physicals (when applicable). Employment will be conditioned upon a negative result of this test. If the applicant tests positive for illegal drugs, the offer of employment will be withdrawn.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.LI-RD1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills. #LI-RD1Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com.About the Role: SysEng HAVOCK (Hardware - Acceleration - Virtualization - Operating Systems - Containerization - Kernel) CoreWeave is looking for a Senior Systems Engineer who is ready to evolve beyond traditional DevOps. You will start by stabilizing and scaling our Linux OS and Kernel build pipelines. Once the foundation is set, you will lead the transition to AI-native infrastructure, building "smart" workflows that don't just report errors, but understand and fix them. You are a Systems Engineer at heart, but you are ready to apply LLMs, RAG, and predictive modeling to solve infrastructure challenges at scale. Our Team's Stack: • Languages: Python, Go, bash/sh, • Observability: Prometheus, Victoria Metrics, Grafana, • OS & Kernel: Linux Kernel (custom build), Ubuntu, • Hardware: Intel/AMD/ARM CPUs, Nvidia GPUs, DPUs, Infiniband and Ethernet NICs, • Containerization: Docker, Kubernetes (k8s), KubeVirt, containerd, kubelet Responsibilities: • Pipeline Architecture: Design, maintain, and automate reproducible OS image build pipelines for our massive fleet of GPU-accelerated servers., • Kernel Distribution: Collaborate with kernel engineers to package, validate, and distribute custom Linux builds across Intel, AMD, and ARM architectures., • Dependency Management: Build tooling to manage dependencies, versioning, and release workflows, ensuring hermetic builds., • Telemetry & Metrics: Standardize the collection of build metrics to create a baseline for future AI modeling., • "Smart" CI/CD & Auto-Remediation: Architect AI agents that ingest and analyze build logs in real-time. Develop systems that auto-triage errors, categorize failure patterns, and generate context-aware fix suggestions for engineering teams., • Predictive Regression Modeling: Design ML workflows that utilize historical performance data to detect kernel and OS regressions (latency, throughput, stability) in staging environments before they impact production., • Dynamic Kernel Tuning: Implement closed-loop feedback systems that analyze real-time system metrics and automatically suggest or apply sysctl parameter optimizations for specific customer workloads., • Next-Gen ChatOps: Engineer LLM-driven interfaces for Slack/internal tools, enabling stakeholders to query build statuses, request log summaries, or provision resources using natural language commands. Requirements: • 4+ years of professional experience in Linux Systems Engineering, Release Engineering, or DevOps., • Deep knowledge of Linux internals (boot process, kernel modules, networking stack)., • Experience with package management (Debian/Ubuntu) and build systems., • Strong proficiency in Python (essential for the AI integration aspects of this role)., • Demonstrable experience integrating API-based AI models (OpenAI, Anthropic, or local open-source models) into software workflows., • Understanding of RAG (Retrieval-Augmented Generation) architectures for querying technical documentation or logs., • Experience building event-driven automation (e.g., using webhooks to trigger analysis agents)., • Familiarity with data structures required for vector search or time-series analysis., • Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or a related field. Nice-to-haves: • Experience with Kubeflow or MLFlow., • Background in High-Performance Computing (HPC)., • Experience fine-tuning small language models (SLMs) for code or log analysis tasks. The base salary range for this role is $153,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption Our Workplace While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Overview Pay: $20 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Weekdays and weekend availability Location: Store(s) will be assigned based on commutable distance. Must be available to work in multiple assigned retail stores within designated territory. Part-time and full-time opportunities available A.J. Perri Plumbing, Heating, and Cooling is the nation’s largest provider of residential HVAC, plumbing, and electrical services, with more than 7,000 professionals and over 45 years of experience helping homeowners improve comfort, efficiency, and reliability in their homes. We are hiring Brand Ambassadors to work inside national home improvement retail stores promoting HVAC services, system tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer: • Weekly pay via direct deposit, • Uncapped Commission paid on top of hourly rate, • Paid training, • Career path into HVAC Sales Advisor roles, • Flexible part-time and full-time schedules Full-time employees also receive: • Insurance available after 31 days, • Low-cost medical (as low as $5/week), • Dental, vision, HSA/FSA, • 401(k) with company match, • Paid time off + holiday pay, • Company-paid life insurance Responsibilities As an In-Store Sales Representative and Lead Generator, you will engage with retail shoppers and introduce them to A.J. Perri heating and air conditioning services. This role supports lead-generation, brand-awareness, and customer education while scheduling in‑home consultations or HVAC services. • Act as a retail Brand-Ambassador, representing ARS with professionalism and enthusiasm., • Serve as a Promotions Specialist explaining service options, system upgrades, and comfort improvements, • Function as a Lead-Generator and Appointment Setter, scheduling in‑home consultation and tune ups with service technicians and comfort advisors, • Note: this role is not door-to-door, does not canvass, and does not function as a canvasser Qualifications What You Need • Positive and energetic personality with strong people skills, • Comfortable approaching and speaking with customers in a retail environment, acting as a product-consultant and support lead-generation efforts, • Retail, kiosk, Door-to-Door, or sales experience preferred (not required), • Ability to stand and walk during shifts, • Weekend and some holiday availability, • Reliable transportation, • Clean, professional appearance representing the ARS brand, • Ability to attend weekly in-office meetings, • Employment is contingent on a background check in accordance with applicable law For questions about the role, you may contact our management team at 732-689-6449 or 732-939-9288 This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: https://www.ars.com/privacy-policy.