Offres part time electrical à Baldwin, New YorkCréer des alertes d'emploi

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Job Description Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for learning and maintaining company standards and protocols., • Responsible for learning, understanding, and being able to speak knowledgeably about the company and the coffee program., • Responsible for knowing and being able to speak about all coffees served in the shop including but not limited to the coffee's components, history, and how to brew those coffees., • Operates coffee brewing equipment, grinders, scales, timers, water towers, point of sale systems, and mobile payment system., • Restocks all areas of store including coffee bar, & back rooms, • Performs opening, closing, and mid-day tasks., • Responsible for learning and perfecting latte art., • Assists in maintaining order and cleanliness of the store through things such as but not limited to sweeping , mopping, cleaning drains, taking out trash, surface cleaning, and dishes., • Provides guests with a memorable experience., • Responsible for taking guest orders and ensuring a complete and accurate order., • Resolves guest complaints with tact and professionalism or alerts attending leader on staff to assist., • Responsible for receiving and signing for orders from suppliers., • Receives deliveries and checks for quality of items delivered as well as accuracy of delivery based on invoice., • Responsible for taking and recording temperatures as required., • Responsible for working in a high volume environment where efficiency, service, and quality must be maintained - crafts each drink with care., • Receives deliveries and checks for quality of items delivered as well as accuracy of delivery based on invoice.*, • Maintains health department standards within the store., • Keeps store clean, stocked, and organized including but not limited to pastry case, condiment station, merchandiser, grab and go refrigerator, bathroom, and walk-in refrigerator., • Abides by the employee dress code protocol., • Displays a positive attitude, passion for coffee, and believes each drink brings value to the customer.Qualifications:, • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Language Ability:, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.Math Ability:, • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.Reasoning Ability:, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.Computer Skills:, • To perform this job successfully, an individual should have knowledge of Square point of sale system and Timestation software.Certificates and Licenses:, • Department of Health and Mental Hygiene certificate preferredKnowledge, Skills, and Other Abilities:, • Time management skills, • Oral and written communication skills, • Professionalism skills, • Ability to keep a basic level of hygiene, • Ability to compromise and collaborate with othersPhysical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, talk or hear, and taste or smell. The employee is frequently required to climb or balance and stoop, kneel, crouch or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds.Work Environment:, • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to wet or humid conditions (non-weather). The employee is occasionally exposed to work in high, precarious places, risk of electrical shock, and vibration., • The noise level in the work environment is usually moderate., • Job Types: Full-time, Part-time, • FLSA Status:Non-Exempt We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionCompany Description Freeport BMW in Freeport Long Island has immediate opportunities for technicians to become part of the BMW family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license., • $72,000-$90,000 Additional Information All your information will be kept confidential according to EEO guidelines. #automotive #technician #mechanic #BMW #ASE

Job DescriptionAutomotive Technician (A/B/C Level) – $19–$45+/hr + Bonuses | Union Shop | Hiring Now ???? Levittown, NY (Long Island) ???? $19.00 – $45.00/hr + Weekly Bonuses | Top Techs Earn 45+ Hours/Week ???? Full-Time | All Skill Levels (A, B & C Techs) | Immediate Openings ???? Join Levittown Ford – VIP Automotive Group Levittown Ford, part of the VIP Automotive Group of Long Island, is actively hiring Automotive Technicians / Auto Mechanics / Service Technicians (A-Level, B-Level, and C-Level) to join our high-volume, state-of-the-art dealership service department. We offer consistent work, strong pay plans, union benefits, and long-term career growth within one of New York’s most successful automotive dealership groups. Whether you’re an experienced Master Technician or an entry-level technician looking to grow, we provide training, tools, and advancement opportunities to help you succeed. ???? Compensation & Benefits • ???? $19.00 – $45.00 per hour (based on experience & skill level), • ???? Weekly production bonuses + year-end performance bonus, • ⏱️ Consistent workflow – technicians regularly flag 45+ hours/week, • ???? Union benefits (pension, medical, dental, PTO, sick & personal time), • ???? Paid ASE certification & manufacturer training, • ???? Tool relocation assistance (company-paid), • ????️ Modern, climate-controlled shop with advanced equipment, • ???? Employee discounts (vehicles, parts & service), • ???? Annual recognition gala & performance awards, • ???? Career growth within VIP Automotive Group (9+ locations)???? Key Responsibilities (What You’ll Do), • Perform diagnostics, maintenance, and repairs on a variety of vehicles, • Complete oil changes, brakes, tires, inspections, and general service repairs, • Diagnose and repair engine, transmission, electrical, and drivability issues, • Perform NY State inspections and manufacturer-recommended services, • Complete software updates, programming, and system diagnostics, • Collaborate with Parts Department for efficient workflow, • Inspect vehicles and recommend additional service needs, • Maintain accurate repair orders and documentation, • Keep work area clean and adhere to safety standards, • Support and mentor junior or apprentice technicians✅ Qualifications, • Experience as an Automotive Technician / Auto Mechanic / Service Technician, • Strong diagnostic and problem-solving skills (A & B techs preferred), • Manufacturer or dealership experience preferred, • ASE certifications a plus (we will help you obtain them), • Ability to work in a fast-paced, high-volume shop, • Valid driver’s license with clean record???? Schedule, • Full-Time position, • 5-day work week, • Monday – Saturday (schedule)???? Location Levittown Ford – VIP Automotive Group Levittown, NY ???? Apply Today Build your career with a top-performing dealership group that invests in its technicians. Whether you’re just starting or are an experienced tech, Levittown Ford offers the pay, training, and support to help you grow. ???? Apply now and join our award-winning service team

Job Description Automotive Technician (A & B Level) ???? Garden City Jeep – VIP Automotive Group of Long Island ???? Full-Time | 5-Day Work Week ???? $20 – $45 plus per hour (based on experience & certifications) We are offering a sign-on bonus of up to $10,000 for highly qualified Ford technicians, with payout after 90 days of successful employment. ???? Build Your Career with Garden City Jeep! Garden City Jeep, part of the VIP Automotive Group of Long Island, is looking for motivated A & B Level Automotive Technicians to join our growing service team. At VIP, we believe in investing in our employees through continuous training, ASE certification support, manufacturer training, and career advancement opportunities. If you’re ready to take your skills to the next level with one of Long Island’s most successful auto groups, this is your opportunity! Why Join Us? ✅ Competitive pay + weekly production bonuses ✅ Union benefits package (pension, health, dental, vacation, sick & personal time) ✅ Paid ASE certifications & manufacturer training ✅ State-of-the-art, climate-controlled facilities ✅ Year-end bonus + recognition at annual VIP Gala ✅ Expense-paid tool relocation ✅ Consistent earning potential – 45+ hours weekly ✅ Career advancement opportunities within VIP Automotive Group Your Role as a Technician As an Automotive Technician, you’ll perform diagnostics, repairs, and routine maintenance while ensuring vehicles are safe, reliable, and performing at their best. Daily Responsibilities: Perform work outlined on repair orders efficiently and accurately Diagnose and repair mechanical and electrical issues Conduct oil changes, brake repairs, tire rotations, and NY state inspections Complete software updates and key programming Collaborate with the parts department to secure required parts Inspect vehicles for additional repair and safety needs Document all work performed accurately on repair orders Maintain clean workspaces and customer vehicles Train and mentor apprentice technicians Stay current with manufacturer bulletins and training requirements What We’re Looking For ✔ A or B Level Technician experience required ✔ Manufacturer training preferred ✔ Strong diagnostic and repair skills ✔ Solid product knowledge ✔ Ability to perform essential job duties with or without accommodation ✔ A positive, customer-first mindset Benefits We Offer Medical & Dental Insurance 401(k) Retirement Plan Paid Time Off (vacation, sick, personal days) Supplemental benefits (disability, life insurance, etc.) Employee discounts on vehicles, parts & service Professional development & training opportunities Annual employee recognition programs Join the Garden City Jeep Service Team! At VIP Automotive Group and Garden City Jeep, we are proud to be an equal opportunity employer that values diversity and growth. We are committed to creating a workplace where every employee can succeed. ???? Apply Today – Grow your career with Garden City Jeep and VIP Automotive Group!

Job DescriptionMaster Automotive Technician – Diesel / Commercial Truck | $150K–$250K+ | Union Shop ???? Levittown, NY (Long Island) ???? $150,000 – $250,000+ (inclusive of salary and bonuses) ???? Full-Time | Master-Level | Immediate Openings SIGN ON BONUS We are offering a sign-on bonus of up to $10,000 for highly qualified Ford technicians, with payout after 90 days of successful employment. ???? Now Hiring: Master Certified Diesel & Commercial Technicians Join Levittown Ford, part of the VIP Automotive Group, as we expand our Ford Pro Elite Commercial Truck Center. We are actively hiring Master Automotive Technicians / Diesel Technicians / Heavy Duty Truck Technicians / Commercial Vehicle Mechanics to work in our brand-new, state-of-the-art, climate-controlled facility built specifically for commercial and fleet vehicles. This is a high-income, high-demand technician opportunity with steady work, union benefits, and top-tier shop conditions. ???? Why Top Technicians Choose Levittown Ford • ???? $150K–$250K+ (inclusive of salary and bonuses), • ???? $35–$55+ per hour based on experience & certifications, • ????️ Brand-new, climate-controlled commercial truck facility, • ????️ Latest OEM Ford diagnostic tools & equipment, • ???? Tool relocation assistance (company-paid), • ???? Paid ASE certifications & manufacturer training, • ⚙️ Consistent workflow – high-volume commercial business, • ???? Career growth across VIP’s dealership network, • ???? Annual recognition gala & performance awards????️ Union Benefits Package, • ???? Medical & Dental Insurance, • ???? Pension Plan + 401(k) options, • ????️ Paid Vacation, Sick Time & Personal Days, • ????️ Disability & Life Insurance, • ???? Employee discounts (vehicles, parts & service)???? Key Responsibilities, • Perform advanced diagnostics, troubleshooting, and repairon:, • Diesel engines, • Gas engines, • Heavy-duty and commercial vehicles, • Repair engines, transmissions, electrical systems, and drivability issues, • Utilize Ford IDS and OEM diagnostic systems, • Maintain high productivity and flat-rate performance, • Ensure top-quality repairs and customer satisfaction (CSI), • Document repairs accurately on repair orders, • Collaborate with service team and mentor junior technicians✅ Qualifications, • Master Technician / A-Level Technician experience required, • Diesel, commercial truck, or heavy-duty repair experience strongly preferred, • Ford certification a plus (not required), • Strong diagnostic and electrical troubleshooting skills, • Proven ability to produce high flat-rate hours, • Own tools required, • Valid driver’s license with clean record???? Schedule, • Full-Time position, • Flexible scheduling options available, • Steady, year-round workflow???? Location Levittown Ford – VIP Automotive Group Levittown, NY ???? Apply Today Take your career to the next level with one of Long Island’s top-performing dealership groups. If you’re a high-level technician ready to maximize your earning potential, apply now and join Levittown Ford’s elite commercial team. ???? Equal Opportunity Employer VIP Automotive Group is an Equal Opportunity Employer committed to diversity, inclusion, and career growth for all employees.

Job Description We are a well-established HVAC and Oil Company serving residential customers. We take pride in delivering high-quality workmanship, reliable service and customer satisfaction. Position Overview We are seeking a skilled and experienced HVAC systems and Oil Burner Tech to join our team. The ideal candidate will have strong troubleshooting abilities, hands on experience with heating and cooling systems, and commitment to professional service. Key Responsibilities: Install maintain, and repair HVAC systems (heating and air conditioning) Service and diagnose oil burner systems. Perform routine inspections and preventive maintenance. Troubleshoot mechanical and electrical issues efficiently. Qualifications: minimum 3+ years' experience in HVAC systems (heating and air conditioning) Strong knowledge of heating systems, oil burners, boilers, and furnaces EPA certification required Valid driver's license with clean driving record Ability to work independently and as a part of a team Strong problem-solving skills and attention to detail Good communication and customer service skills Benefits: Competitive hourly wage/salary, overtime opportunities, paid time off and holidays, health benefits (if applicable), company vehicle How to apply: Please submit your resume and contact information. Qualified candidates will be contacted for an interview.

Job Description❄️ Advance Your HVAC Career with a Trusted Long Island Leader – Join J&E Plumbing and Heating of LI as an HVAC Mechanic! ❄️ Position Title: HVAC Mechanic Company Name: J&E Plumbing and Heating of LI Pay Range: $28–$38 per hour, depending on experience Industry: Plumbing (Residential & Commercial) Job Overview J&E Plumbing and Heating of LI is seeking a skilled HVAC Mechanic with a minimum of 4 years of hands-on experience to join our expanding team based in Baldwin, NY. As we celebrate 10 years of servicing Long Island and grow into our newly acquired headquarters, we are building a strong HVAC division to complement our established plumbing operations. This is an excellent opportunity for a motivated HVAC professional who is ready to grow with a stable, forward-moving company that values quality workmanship, teamwork, and long-term career development. You will work on residential and light commercial HVAC installations, replacements, service, and maintenance projects across Long Island, helping us continue to deliver efficient, high-quality comfort solutions to our customers. Who We Are J&E Plumbing and Heating of LI is a trusted Long Island-based contractor known for delivering exceptional plumbing and HVAC services with honesty, integrity, and professionalism. As a family-oriented and forward-thinking company, we foster a positive, team-driven environment where employees are supported in growing both personally and professionally. With a new headquarters in Baldwin, NY and a decade of proven success, we are entering an exciting phase of expansion — and we’re looking for dedicated professionals who want to build a lasting career with us. Key Responsibilities Install, service, and repair residential and light commercial HVAC systems Perform system diagnostics and troubleshoot heating and cooling equipment Install furnaces, boilers, condensers, air handlers, ductwork, mini-splits, and related components Interpret blueprints, schematics, and manufacturer specifications Ensure all work complies with local mechanical codes and company quality standards Perform preventative maintenance and system inspections Maintain organized job sites and company vehicles Communicate clearly with customers regarding system performance and recommendations Collaborate with plumbing and field teams to meet project timelines Represent J&E Plumbing and Heating professionally at all job sites Qualifications Minimum 4 years of hands-on HVAC experience Strong knowledge of residential and light commercial heating and cooling systems Experience with system installations, replacements, and service calls Ability to troubleshoot electrical and mechanical HVAC components Familiarity with local HVAC codes and safety standards EPA Certification required Valid driver’s license with a clean driving record preferred Strong communication skills and customer-focused mindset Ability to work independently and as part of a team Willingness to travel to job sites throughout Long Island Benefits Competitive Pay: $28–$38 per hour based on experience Weekly Pay with overtime opportunities Retirement: 401(k) with hourly employer contribution Health & Wellness: Medical, dental, and vision insurance (employee share) Time Off: Accrued PTO (up to 60 hours) Career Growth: Paid training, certifications, and advancement opportunities Company Culture: High-morale, team-driven environment with long-term growth potential Work Schedule Full-time Monday to Friday Overtime available based on seasonal and project demands Work Location Based in Baldwin, NY Projects located throughout Long Island (residential and light commercial sites) Daily travel to job sites required Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. #FC25

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Service Technician. All shifts: 8:00am - 4:00pm & 2:00pm - 10:00pm. Monday - Friday - Weekends and Nights available! You will take the lead in troubleshooting and repair efforts, identifying and diagnosing HVAC issues on residential units. Handles warranty services efficiently and responds promptly to perform emergency repairs. What you Will do: • Perform start-ups of newly installed HVAC Systems., • Troubleshoot system issues and diagnose problems., • Perform minor repairs and component replacements., • Handle warranty work and callbacks professionally and efficiently., • Ensure all systems operate safely and according to manufacturer specifications., • Maintain accurate service records and documentation., • Communicate findings and recommendations clearly to customers and management., • Diagnose and repair HVAC units., • Perform HVAC service, repairs, and maintenance for residential clients., • Provides on the best solution for the customer., • Collaborate with the team to ensure projects are completed efficiently., • Maintain communication with dispatch, your manager, parts, and installation teams., • Educating and assisting customers in choosing the best finance options and maintenance plans. QUALIFICATIONS FOR THE JOB: • 3-5 years of experience in related field., • High School Diploma or equivalent, • Valid Driver's license., • Knowledge of HVAC codes and proper application; knowledge of proper electrical and HVAC safety., • Must have strong math skills., • Knowledge of Gas systems and appliances., • Ability to work independently and as part of a team, • Ability to develop heating, ventilating, and air conditioning system modification plans., • Run after hours calls as required. REQUIREMENTS AND SKILLS: • Performs preventive maintenance on Gas heating systems, and associated equipment., • Ability to explain technical information to customers., • Ability to effectively communicate information and respond to customer questions., • Strong listening and communication skills., • Teamwork oriented., • Ability to thrive in a fast-paced, customer-focused work environment., • Ability to read and understand documents such as policy manuals, safety rules, and procedure manuals. Why you'll love Universe Home Services: We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program, • Commissions And much more! Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers. Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Free uniforms, • Health insurance, • Paid time off No Shorts Electric | Valley Stream, NY RESIDENTIAL ELECTRICIAN / MECHANIC TECHNICIAN No Shorts Electric is a 5 Star Leading residential electrical contractor serving the Long Island area. We take pride in delivering clean, professional work and an exceptional customer experience and we're looking for a skilled electrician who shares those same values. WHAT YOU'LL BE DOING: Troubleshooting and repairing non-working circuits in residential homes Performing electric service upgrades Panel replacements and installations Wiring and rewiring residential properties Diagnosing electrical issues and communicating findings clearly to homeowners Maintaining a clean, organized jobsite at all times WHAT WE'RE LOOKING FOR: Proven experience in residential electrical work Strong troubleshooting skills you can diagnose a dead circuit efficiently and accurately Experience with service upgrades and panel replacements Clean, detail-oriented work habits we take pride in how our jobs look Excellent customer service skills you're professional, friendly, and respectful in customers' homes Well-groomed and professionally presented at all times Ability to work with others Valid driver's license and reliable transportation Ability to work independently and manage your time on the job WHY JOIN NO SHORTS ELECTRIC? Work for a company that holds itself to a high standard Consistent residential work in the Long Island area Be part of a team that values quality and professionalism above all else TO APPLY: Send your resume and a brief description of your experience to [INSERT EMAIL] or call/text [INSERT PHONE NUMBER]. Serious applicants only. References required.

Job Description We are looking for a motivated electrician to join our family here at James Tech Electric. This is a great company we all worked in the field, so we know what it takes and appreciate what it takes to get the jobs done neatly and correctly. Requirements: -Minimum 5 years experience in the high end residential electrical field -Able to read plans -Able to work and direct a helper -Work efficiently -Must have own tools -Must speak English -Must have a valid NYS drivers license Benefits: -New company vehicles -Company apparel -Great work environment -Opportunity to advanced in company -Paid holidays -Paid vacation (after 90 days) -401k and health benefits available (after 90 days) Company DescriptionAt James Tech Electric, we’re more than just an electrical company—we’re a family. As a father and son owned and operated business with over 35 years of experience and over 15 years in business, we’ve built our reputation on respect, quality workmanship, and strong team values. When you join our crew, you're not just another employee—you become part of a close-knit team that looks out for one another. We take pride in our work and our workplace. Our fleet includes new, well-maintained trucks, and we believe a clean work environment—whether on the job site or in your vehicle—reflects our professionalism. We’re growing, and we want our team members to grow with us. Whether you're looking to sharpen your skills, take on more responsibility, or move into a leadership role, there’s real opportunity for advancement here. If you’re looking for a company that respects your time, values your effort, and treats you like family, we’d love to meet you.At James Tech Electric, we’re more than just an electrical company—we’re a family. As a father and son owned and operated business with over 35 years of experience and over 15 years in business, we’ve built our reputation on respect, quality workmanship, and strong team values. When you join our crew, you're not just another employee—you become part of a close-knit team that looks out for one another.\r\n\r\nWe take pride in our work and our workplace. Our fleet includes new, well-maintained trucks, and we believe a clean work environment—whether on the job site or in your vehicle—reflects our professionalism.\r\n\r\nWe’re growing, and we want our team members to grow with us. Whether you're looking to sharpen your skills, take on more responsibility, or move into a leadership role, there’s real opportunity for advancement here.\r\n\r\nIf you’re looking for a company that respects your time, values your effort, and treats you like family, we’d love to meet you.

Job Description • We are hiring immediately for a full time MAINTENANCE TECHNICIAN position., • Location: Coffee Distributing Corp - 200 Broadway, New Hyde Park, NY 11040. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 7:00 am to 3:30 pm. Further details upon interview., • Requirement: Previous technical and mechanical experience required. This job may require you to lift up to 50 pounds., • Pay Range: $23.00 per hour to $24.00 per hour., • Additional Job Duties and Responsibilities:, • Repair and refurbish coffee equipment and water coolers., • Diagnose equipment issues through visual inspection and listening tests., • Disassemble machines to identify malfunctions and access problem areas., • Inspect parts for wear, misalignment, or defects; repair or replace components as needed., • Realign, adjust, and test equipment to ensure proper operation after repair., • Prepare machines for installation at customer locations., • Review inventory, order parts, and manage shipping and receiving of machines., • Maintain accurate equipment and parts inventory., • Operate mechanical equipment and hand tools (e.g., drills, grinders, welding torches). *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: • Some exposure to elevated degrees of high heat, noise, dust, dirt and/or areas requiring infection control. Requires meeting deadlines for completion of work on a daily basis. Must be able to work all hours, including weekends and nights, as necessary, in order to maintain facility at the appropriate and safe level. Associates at Canteen are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCanteen.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID:1517937 Canteen

Job Description Maintenance Technician – Food Manufacturing Location: [City, State] Job Type: Full-Time Industry: Food Manufacturing / Processing Position Overview We are seeking a skilled Maintenance Technician to support production and packaging operations in a food manufacturing facility. This role is responsible for preventive maintenance, troubleshooting, and repair of manufacturing and packaging equipment to ensure safe, efficient, and compliant production. The ideal candidate has hands-on mechanical and basic electrical experience, understands food-grade environments, and can respond quickly to minimize downtime. Key Responsibilities • Perform preventive and corrective maintenance on food processing and packaging equipment, • Troubleshoot mechanical, electrical, pneumatic, and hydraulic issues, • Maintain and repair conveyors, fillers, sealers, mixers, ovens, and packaging machinery, • Respond to equipment breakdowns and production support calls, • Perform machine setups, changeovers, and adjustments, • Conduct equipment inspections to ensure reliability and safety, • Read and interpret mechanical drawings and electrical schematics, • Document maintenance activities using CMMS or work order systems, • Follow GMP, HACCP, and food safety requirements, • Adhere to all safety policies, including lockout/tagout procedures Qualifications • 2–5+ years of maintenance experience in a food, beverage, or consumer goods manufacturing environment, • Strong mechanical troubleshooting skills, • Basic electrical knowledge (motors, sensors, wiring, controls), • Experience with conveyors and packaging machinery, • Ability to work independently and as part of a team, • Willingness to work off-shifts, weekends, or on-call as needed Preferred Experience • Experience with high-speed packaging lines, • Pneumatic and hydraulic system knowledge, • PLC troubleshooting exposure (not programming-heavy), • Familiarity with FDA-regulated or GMP environments, • Welding or fabrication experience

Job DescriptionDescription: Overview For over 75 years, Heatherwood has been dedicated to developing upscale residential rental communities, commercial properties, and luxury urban spaces. Our reputation for quality construction, innovative design, and exceptional service has made us a recognized leader in the industry. At Heatherwood, we believe our employees are our greatest asset, which is why we prioritize professional development and promote from within. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Technician II, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. What You Bring to Heatherwood • A positive attitude, • Safety-first mindset and adherence to all safety policies, • A customer-first approach to service, • Team-oriented approach and strong work ethic, • High attention to detail and accountability for quality and timeliness of work, • Reliability, dependability, and initiative to solve problems independently. Ability to work independently through task completion, • Commitment to completing time-sensitive tasks and communicating timelines., • Effective written and verbal communication skills, • Valid driver’s license Key Responsibilities • Knowledge of and compliance with company standards, policies, and procedures, • Maintain compliance with all Fair Housing standards in all resident interactions, • Maintain property standards for cleanliness, appearance, safety, and functionality, • Maintains a professional appearance at all times by practicing good personal hygiene and wearing a clean, presentable uniform., • Respond to service requests in a timely, professional, and customer-focused manner, • Flexibility to work overtime, on weekends, and participate in the emergency on-call rotation as dictated by business needs., • Assist with preventative maintenance programs and scheduled inspections, • Conduct property walks and equipment audits; identify and address maintenance issues, • Safely operate hand and power tools, • Perform apartment turnover activities, including cleaning, painting, and repairs, • Maintain consistent communication with the management team regarding timelines, priorities, and progress, • Perform physical tasks including lifting up to 50 pounds, climbing, bending, kneeling, and standing for extended periods, • Participate in snow removal activities as directed by the management team, • This is not intended to be a complete list of all duties and responsibilities; duties may change based on business needs. Technical Knowledge • Working knowledge and hands-on experience with: o Various HVAC systems o Plumbing (water heaters, drain clearing, fixture repair and replacement) o Minor electrical repairs o Appliance repair o Drywall preparation and repair, painting, and basic carpentry • General understanding of building systems, including fire sprinkler, fire alarm, and central mechanical/HVAC systems (as applicable), • Understanding of and ability to assist with work order management and apartment make-ready processes, • Ability to learn and effectively navigate assigned maintenance applications and related technologies Development & Training • Monthly safety training as part of Heatherwood’s Safety Culture, • Ongoing technical training, • Providing resources and support to help you successfully complete and maintain all necessary credentials, such as EPA type I, II & Universal, CPR, CPO, and standpipe certifications (NYC)., • Online training coursework to support ongoing development, • Internal growth opportunitiesRequirements:

Job ID: 729406BR Date posted: May. 27, 2026 Description:Lockheed Martin's RMS team at Mitchel Field, Long Island (NYC Metro Area) is seeking a full-time Early Career Electrical Engineer to join a fast moving hardware group that supports the U.S. Navy's Strategic Navigation Submarine Program. In this role, you will rotate across a variety of tasks - CCA/board design & troubleshooting, FPGA development, cable assembly design & troubleshooting, network diagram creation, etc -giving you broad exposure to both tactical and auxiliary systems across the entire engineering product lifecycle. You will also collaborate across teams, as well as directly with our customer, in order to respond to emergent issues and concerns from our fleet and forward sites. The successful candidate will have experience and/or knowledge of core EE concepts (circuit analysis, power distribution, signal integrity, etc) and experience working with electrical design documentation (schematics, network diagrams, CCA/Board layouts, etc). This role is ideal for a recent graduate with 1-2 years of experience who enjoys learning on the job and adapting to evolving project needs. Must be a US Citizen; This position will require a government security clearance.; This position is located at a facility that requires special access. Basic Qualifications: • Bachelor's degree in Electrical Engineering (or related discipline) from an accredited institution, • 1-2 years of relevant professional experience (internships, co‑ops, or full‑time), • Applied Experience with core EE concepts such as circuit analysis, power distribution, signal integrity, etc, • Experience working with electrical design documentation (schematics, network diagrams, CCA/board layouts), • Familiarity with FPGA design flow, • Ability to work effectively on Agile teams, both on‑site and remotely, • Strong interpersonal & time‑management skills, • Must be a US Citizen.; This position will require a government security clearance; This position is located at a facility that requires special access Desired Skills: • Advanced degree (M.S) in Electrical Engineering, Computer Science, Physics, or related field, • Proficiency with CAE tools such as Altium Designer, Zuken CR-8000, or AutoCAD Electrical., • Hands‑on FPGA experience (e.g., Xilinx/Intel families) including IP integration and board bring‑up, • Power‑systems knowledge (UPS, battery management, etc), • Familiarity with Position, Navigation, and Timing (PNT) concepts, including inertial navigation algorithms Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off The base range for this position in New York is $101,654 - $160,620. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: 4 yr and up College Business Unit: RMS Relocation Available: Possible Career Area: Electrical Engineering Type: Full-Time Shift: First

Job Description Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns. MMS Group is seeking an experienced Building Maintenance Technician for a 420-unit residential property located in Hempstead New York. Pay Rate: $19.71/HR Key Responsibilities: Regular Maintenance: Maintain residential apartment homes and other areas on the property, including building exteriors, interiors, and public areas, regularly. Repairs: Perform small appliance, plumbing, electrical, and other repairs in residential apartments and other areas of the property. Installation: Install tile and laminate flooring Emergency Response: Take part in the on-call rotation schedule, responding to emergency calls according to the company's policy on after-hour emergency calls Unit Turnover: Manage the turnover of empty apartment units, including repairs (e.g., sheetrock, taping, sanding, painting, and fixing doors, windows, light fixtures, etc.). Additional Duties: Perform other duties as outlined in the job description. Desired Skills: Independence: Able to work in a challenging environment with minimal direction. Problem-solving: Solution-based thinking skills are highly valued. Organizational Skills: Ability to work independently, organize tasks, multitask, manage time, and prioritize tasks Communication: Excellent verbal and written communication skills Customer Service: Great customer service skills are needed. Requirements: Experience: Three+ years of residential multifamily property management/apartment maintenance. Education: High School Diploma or equivalent Skill: experience with electrical, plumbing, and HVAC License: valid driver’s license Certification: Fire Safety Tools: Possession of basic tools needed to perform routine maintenance tasks. Physical Requirements: Physical aspects of the job may require heavy lifting, bending, kneeling, stooping, climbing, balancing, and carrying Computer Skills: Proficient in Microsoft Office (Word, Excel, Outlook). About Us: For fifty years, MMS Group and its affiliates (Arco Management and TUC Management) have been dedicated to quality property management. Our growing portfolio exceeds 40,000 residential units and includes affordable housing cooperatives, subsidized rental properties, supportive housing, and conventional apartment buildings. Our clients include progressive building owners, governmental agencies, real estate entrepreneurs, financiers, not-for-profit organizations, and cooperative and condominium boards. While each community and client are unique, each share our singular commitment to excellence. Why join our Team? We invite you to join our growing team of dedicated professionals in a high-tech environment. We offer competitive salaries, benefits, and opportunities for growth and advancement through continuous training and education programs. Contact us today to see how you can achieve your MMS Edge. Perks and Benefits: MMS Group believes in a healthy work-life balance. Keeping our employees in mind, here is a list of a few benefits we offer: Paid Holidays: 12 paid holidays per year. Paid Time-Off: Up to 2 weeks PTO in the first year, increasing with tenure. Healthcare Plans: Comprehensive Medical, Dental, and Vision plans available after 60 days of employment. Health Reimbursement Account: Up to $3K per calendar year. Life Insurance: Company-paid life insurance. Retirement Savings: Company-matched 401(k) retirement savings plan. Certifications and Licensing: Company-paid certifications and licensing. And much more! Are you the person we’re looking for? Apply now. Visit us at www.mmsgroup.com for more details! Equal Opportunity Employer

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job Description Looking for a career where you can make a difference in someone else's life? Where opportunities abound to advance your future, both personally and professionally? The Bristal Assisted Living is the place for you. You'll thrive in a premier senior care organization that values you as an individual — not just your experience and skillsets, but your unique talents and energy. You'll enrich the community in which you work, and that community will enrich you. We call what we do at The Bristal "hospitality with a higher purpose." We know you'll make an impactful difference. Because the difference is you. Come join us! We are seeking a talented Maintenance Assistant/Painter to assist with building maintenance and repairs of our luxury assisted living community. In this role, you will be responsible for all aspects of building maintenance, including light plumbing, carpentry, HVAC, electrical, furniture assembly, snow removal, equipment repair, preventative maintenance. Having HVAC experience is considered a plus. At times, you may come into contact with residents, resident families, other guests and team members, and we expect you to maintain a friendly, courteous and positive attitude at all times, so that these encounters are pleasant and professional. The care, attention to detail and superior customer service you bring to your maintenance responsibilities are fundamental to the quality of life and the general wellbeing of our residents every day. The ideal candidate will have the following skills/ qualifications: • Previous Painting and spackling experience a MUST, as well as maintenance/repair experience and skilled in one or many of the areas noted above, • Experience working in a hotel, apartment complex, residential community, assisted living community or skilled nursing facility is a plus, • Ability to work independently as well as part of a team, • Kind, patient and compassionate demeanor when encountering residents, management, family members and guests, • Ability to multi-task, prioritize workloads and juggle many hats at the same time, • Must have a stable work history and solid references, • A minimum of a high school diploma is required, but some college or advanced training is preferred

Job Description (Multi-Location Position Requiring Daily Travel) ABOUT THE ROLE We are seeking experienced trade professionals to join our mobile facility maintenance and repair team. Technicians service multiple commercial client locations daily throughout the tri-state area using company-provided vehicles. This role is ideal for professionals who enjoy variety, problem-solving, and working independently while being part of a reliable, growing company. WHAT YOU’LL BE DOING • Travel between multiple client sites daily, • Perform facility maintenance and repair work across one or more trades, • Communicate professionally with clients and dispatch, • Diagnose issues and implement on-site solutions TRADES WE’RE LOOKING FOR (Expertise in One or More) • Electrical, • Plumbing, • Carpentry, • Masonry, • Flooring, • General Handyman / Facility Repairs WHAT MAKES YOU A GOOD FIT • Valid driver’s license with clean driving record, • Experience operating commercial vans, • Comfortable with daily driving and mobile work, • Strong troubleshooting skills, • Professional, customer-focused demeanor, • Smartphone and mobile app proficiency, • Physically capable of trade work, • Reliable, organized, self-motivated SCHEDULE & AVAILABILITY • Variable start and end times, • On-call rotation for emergency services, • Occasional weekends and overtime, • Flexible, non-traditional schedule, • Overtime available during high-demand periods PAY & GROWTH • Based on experience, • Faster advancement for multi-trade technicians, • Long-term growth opportunities BENEFITS • Paid time off, • Holiday pay HOW TO APPLY Please include: • Relevant trade experience, • Desired pay range, • Contact information Qualified candidates will be contacted for an in-person interview. NOTE: This is a mobile role requiring daily travel throughout the tri-state area. Company DescriptionFacility Maintenance & Repair ServicesFacility Maintenance & Repair Services

Job Location(s) US-NY-Old Westbury Job ID 2025-4094 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Department of Electrical and Computer Engineering at New York Institute of Technology, Long Island, is looking for an adjunct professor to teach Electrical and Computer Engineering and an introductory course for all Engineering undergraduate students at its Old Westbury campus. Candidates should have a M.S. or Ph.D. degree in Electrical and Computer Engineering or a related area. Teaching experience or industrial experience in Electrical and Computer Engineering and related Lab applications are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

There's a Place for You at Cooper Electric Supply, LLC. A career at Cooper Electric Supply, LLC is more than a job. You're investing in a brighter, more sustainable future together and joining a team that makes a real difference for our customers. Cooper Electric Supply, LLC offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory or other building - you can find it here. We operate throughout the northeast and are part of the Sonepar group, the world's #1 electrical distributor with over 45,000 associates around the globe. Being "Powered by Difference" means we respect and value diverse perspectives. Cooper Electric Supply, LLC we offer a supportive culture and great benefits, and as part of the larger Sonepar group, we can offer exciting opportunities to grow your career. Whatyouwill do: • Greet walk-in customer and assist withorder and product selection., • Enter sales orders and pick items from warehouse inventory., • Prepare customer sales ticket and collect customer payment., • Handles phone-in customers with pleasant and courteous etiquette., • Maintain counter area displays clean, organized, and stocked with inventory., • Reach monthly goals in sales and gross margin., • Encourage the use of digital tools across customer base., • Multi-task and continually prioritize tasks to be completed throughout the day. Whatyouwill bring: • Sales experience and/or electrical knowledge preferred., • Strong customer service skills and inter-personal communication skills., • Strong mathematics, verbal, and written communication skills., • Ability to effectively communicate information and present solutions to a customer., • The ability to operate computers and relevant computer software., • Ability to prioritize needs in a fast-paced environment. Physical Requirements and Work Environment • The ability to sit, stand, and walk for the full length of the assigned shift., • The ability to lift, push, and pull material and objects weighing up to 50 lbs. and heavier weights with proper equipment., • The ability to bend, stoop, kneel, reach, and climbto perform various duties., • The ability to operate appropriate powered industrial trucks safely. Training will be provided., • Various portions of the job are performed in a retail and warehouse setting. Salary Range: $17 - $20/hr based on experience Location: Valley Stream, NY Work Hours: Monday - Friday, 7:30am - 4pm What We Offer You We offer great family-friendly benefits to full-time associates: • Healthcare plans, • Dental & vision, • Paid time off, • Paid parental leave, • 401(k) retirement savings with company match, • Professional and personal development programs, • Opportunity to become a shareholder, • Employer-paid short- and long-term disability, • Employer-paid life insurance for spouse and dependents, • Robust wellness program, • Gym reimbursement, • Employee Assistance Program (EAP) We're proud to be a military-friendly company, and our many employee resource groups (ERGs) help you make connections and feel supported. Learn More About Us Get to know us on , , and and learn how we're "Powering Progress for Future Generations." Learn more at _ Cooper Electric Supply, LLC is part of the Sonepar family of brands: _ Equal Employment Opportunity Statement Sonepar is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, or any other categories protected by federal, state or local law. Sonepar and our family of brands are committed to the full inclusion of all qualified individuals. In keeping with our commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if a reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please call 843-745-2420 or email _. EEO is the Law Applicants and employees are protected under Federal law from discrimination. To learn more, _. Pay Transparency Non-Discrimination Provision Sonepar follows Executive Order 11246, including the Pay Transparency Nondiscrimination Provision. To learn more, _.

Job Description Efficient Energy Compliance is looking for several qualified professionals dedicated to combating climate change by decarbonizing buildings and providing resilient solutions for new building systems. As a crucial part of our expanding team, this role will be contributing to EEC’s services of commissioning, retro-commissioning, energy auditing, and resiliency retrofits in the NYC area. We are seeking qualified individuals who will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below: We are seeking a Commissioning Engineer with a strong background in energy efficiency and building systems to join our team. The ideal candidate will be responsible for overseeing the commissioning process of energy-efficient systems and technologies in both new construc Responsibilities • Lead and manage the commissioning process from kickoff through closeout, keeping projects organized, on schedule, and moving forward, • Coordinate closely with ownership, design teams, contractors, and vendors to align scope, resolve issues, and maintain progress, • Conduct site inspections to verify system installations align with design intent, specifications, and energy efficiency goals, • Review submittals and shop drawings to confirm systems are being installed in accordance with project requirements, • Oversee and witness equipment startup, pre-functional checklists, and functional performance testing across all systems, • Perform system testing, diagnostics, and troubleshooting to verify proper operation and identify issues early, • Execute point-to-point verification and sequence of operations testing for HVAC, electrical, lighting controls, and BAS systems, • Maintain commissioning schedules, issue logs, and documentation, actively tracking deficiencies through resolution, • Work directly with GC and MEP trades during construction to support system readiness, coordination, and turnover, • Analyze BAS trends and system performance data to identify inefficiencies and optimize building operations, • Monitor and validate energy performance during commissioning, providing practical recommendations for improvement, • Ensure all commissioning activities align with applicable codes and standards, including NYC Energy Conservation Code (NYCECC), LEED, and ASHRAE guidelines, • Support multiple projects simultaneously while maintaining strong communication, organization, and attention to detail, • Prepare and contribute to preliminary and final commissioning reports, including all testing documentation and system verification, • Coordinate building turnover by supporting O&M documentation, as-builts, and training for facility teams, • Participate in seasonal testing and warranty phase reviews, helping identify and resolve post-occupancy issues, • Utilize commissioning platforms such as Bluerithm to manage workflows, testing, and reporting Requirements: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Energy Management, or a related field. 5+ years of experience in building systems commissioning, with a focus on energy efficiency and sustainable building practices. Strong knowledge of energy-efficient technologies, building systems (HVAC, lighting, controls), and renewable energy systems. Familiarity with commissioning processes for energy-efficient systems, including building automation, HVAC, and lighting systems. In-depth understanding of energy codes, standards, and certifications (e.g., NYC Energy Conservation Code, LEED, ASHRAE, Title 24). Experience with energy modeling and system analysis software (e.g., Trane Trace, EnergyPlus, etc.). Strong troubleshooting, diagnostic, and problem-solving skills. Excellent communication skills, with the ability to collaborate effectively with project teams, clients, and contractors. Ability to manage multiple projects and timelines, ensuring completion within scope, budget, and schedule. Preferred Skills: Certification as a Commissioning Professional (CxA) or LEED Accredited Professional (LEED AP). Knowledge of New York City’s energy codes and regulatory environment. Ideal Candidate Will Have • Excellent work ethic, • Strong verbal and written communication skills, • Excellent communication and presenter skills, • Attention to detail, • Strong time-management skills, • Strong organizational skills, • Self-motivation We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted. We offer a competitive salary and good benefits package, including healthcare benefits and paid time off. 401K and Aflac & Flexible spending account. Interested candidates, please forward resume with salary requirements. Salary depending on experience. Efficient Energy Compliance LLC is proud to be an equal opportunity employer.

Job DescriptionService Employee / Auxiliary Equipment Specialist Location: Various locations in the NY Metro region Department: Maintenance $30.00/hr based on union set wages Help Keep Our Fleet Connected, Safe, and Road-Ready First Student is looking for a hands-on Service Employee / Auxiliary Equipment Specialist to support the installation, maintenance, and repair of electronic equipment across our fleet. This role is ideal for someone who enjoys working independently, solving technical problems, and keeping vehicles operating safely and efficiently. In this position, you will work closely with the Maintenance team to service equipment such as two-way radios, GPS systems, AM/FM systems, Child Check systems, video equipment, and other vehicle-based electronic devices used in First Student and customer-owned vehicles. What You'll Do As an Auxiliary Equipment Specialist, you will: • Install, inspect, diagnose, and repair vehicle electrical and auxiliary equipment, • Maintain two-way radios, GPS units, video systems, Child Check equipment, and related devices, • Complete work in a clean, professional, and timely manner, • Accurately document maintenance work, labor, parts, and supplies used, • Maintain inventory and supplies in a mobile service unit, • Perform light interior and exterior maintenance on buses and trucks as needed, • Clean vehicle interiors and exteriors when required to help maintain fleet standards, • Identify and report potentially unsafe equipment conditions, • Drive buses or service vehicles for non-revenue needs, including testing, shuttling, and parts pickup/delivery, • Follow all First Student safety standards, policies, and PPE requirements, • Support additional maintenance needs as directed by managementWhat We're Looking For The right candidate is dependable, safety-focused, and comfortable working in a fast-paced fleet environment. You should be able to troubleshoot problems, use electrical tools confidently, and communicate well with supervisors, technicians, and operations teams. Minimum Requirements • High school diploma or equivalent, • Class B CDL with passenger endorsement required, or ability to obtain within 3 months of hire, • Participation in ASE testing program for electrical systems, • Ability to complete all required First Student training modules and stay current with training requirements, • Basic computer, smartphone, and tablet proficiency, • Regular, predictable attendancePreferred Skills and Experience, • Knowledge of fleet maintenance, especially auxiliary or electronic vehicle equipment, • Experience using hand tools and specialized electrical tools, including voltage testers and DVOMs, • Ability to follow state motor vehicle inspection and repair standards, • Strong attention to safety and detail, • Ability to work independently and as part of a team, • Strong communication and customer service skills, • Willingness to learn new tasks and apply new skills quickly, • Ability to maintain a clean and organized work environmentWorking Conditions This is a hands-on, field-based role that requires flexibility and physical stamina. • Work outdoors in varied seasonal weather conditions, • Work outside more than 75% of the time, • Work in a maintenance shop environment less than 25% of the time, • Work in dusty conditions as needed, with required PPE provided, • Perform physical tasks such as kneeling, bending, climbing ladders, and working around vehicles, • Lift a minimum of 50 pounds regularly, • Perform painting or touch-up work as needed, including spray painting, roller painting, or brush paintingSafety Matters At First Student, safety is part of everything we do. This role requires the use of proper PPE, including safety glasses, steel-toed shoes, gloves when needed, and appropriate work attire. Ready to Join Us? If you enjoy hands-on technical work, take pride in keeping vehicles safe and reliable, and want to be part of a team that supports student transportation every day, we encourage you to apply. Apply today and help keep our fleet moving safely. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job DescriptionJob description Seeking a motivated, intelligent, hard-working individual to grow as part of the Quality Assurance and Regulatory Affairs team. PRIMARY DUTIES AND RESPONSIBILITIES • Develop/design effective test methods., • Facilitate software design and development for medical devices., • Performance testing and reporting on software, hardware, and the compatibility for all accessories., • Maintain/calibrate the accuracy of all testing equipment., • Perform risk assessments for medical devices and accessories., • Maintain the effectiveness of quality control system and non-conforming materials control system., • Discuss and solve quality problems with vendors., • Development and prototyping of new products with existing or new vendors., • Investigate problems and make improvement on current products, • New product development. REQUIREMENTS Education : Bachelor degree in mechanical, electrical, material, biomedical engineering, or relative field. Training : SOPs, Risk Assessment/ On-the-job Training Abilities : • Familiar with FDA 21CFR 820 and ISO 13485 regulations, • Knowledge of European regulations is a plus, • Extreme attention to details, • Knowledge of common medical materials (silicone, polyurethane, etc.), • Knowledge of electrical circuits, • Knowledge of basic programming, • Able to think outside the box with excellent problem solving abilities, • Excellent interpersonal, commutation, and writing skills, • Highly organized, • Excellent computational skills (MS Office, databases, testing), • Knowledge of C/C++ is a plus. Experience : 2-5 years of experience as a quality representative in a FDA or ISO 13485 compliant company Medical Dental 401K Vacation Job Type: Full-time Pay: $65,000 - $70,000 per year Powered by JazzHR W0tsseK6j1

Job Description Ready to launch your career in accounting or finance? Join our team and gain hands-on experience in Accounts Payable. As part of the Power-Flo Technologies Accounts Payable team, you will play a key role in ensuring financial accuracy and operational efficiency by processing invoices, managing incoming bills, and maintaining compliance with company policies. This entry-level role supports daily AP operations—including utilities, inventory and product invoices, employee expense reimbursements—while gaining hands-on experience in a fast-paced environment. Other specific duties associated with this position include: • Manage incoming invoices, • Release payments/cut payments, • Request "Proof of Deliveries" from vendors, • Process direct shipments, • Ensure all payments are made in accordance with company policy, • Ensure all payments are sent on time, • Other duties upon request On the job training provided. No experience necessary. Monday to Friday, 8 AM - 5 PM. Full-time, on-site. Salary Range: $17 - $19/hour Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • Company provided life insurance (after 1 year), • ESOP (Employee Stock Ownership Plan) Entry Level Accounts Payable Clerks Basic Qualifications : • High School diploma or equivalent, • Strong basic mathematical skills, • Demonstrated ability to communicate clearly in both written and verbal formats, • Experience with Microsoft Office software, including Word and Excel, • Ability to work well in a team environment, • Valid and clean driver's license to make trips to the bank and post office as needed Physical Ability Requirements : • Ability to sit for prolonged periods of time (with accommodations upon request), • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time (with accommodations upon request) Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Who We Are South Oxford Management (SOM) is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for both our residents and team members. Our owners and leadership team bring extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Supervisor is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor collaborates closely with the Community Manager and Maintenance Technicians to ensure that all aspects of the community are well-maintained. The Maintenance Supervisor anticipates, identifies, and corrects problems affecting the community, and implements procedures to prevent such issues. The Maintenance Supervisor works diligently to cultivate resident satisfaction. Things You Will Do Leadership • Assist in the hiring, training, and supervising of all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Responsible for the overall appearance, condition, and functionality of all buildings and grounds, ensuring they are fully operational and consistently meet company standards Maintenance • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors; depending on the property needs and secure bids for services, • Utilize maintenance management systems on computers and iPads to complete work order requests Safety • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights, • Conduct regular safety meetings with the Maintenance Team Customer Service • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • Perform additional duties as assigned by the Community Manager Things You Will Need • You must have a valid driving license., • High School diploma or equivalent, • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • May be required to lift up to 50 pounds without assistance. Skills: • Experience leading and managing others., • General knowledge of all things pertaining to property maintenance., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • Attention to detail., • Able to multitask and meet deadlines. What We Will Provide You South Oxford Management LLC provides a range of insurance options and benefits for our full-time team members. Including: • $32/hr to $34/hr, • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus, • Employee Rewards and Recognition You’re exceptional. Let us make you feel it. Join our team. South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford utilizes E-Verify, a web-based system that enables enrolled employers to verify the eligibility of their employees to work in the United States through the U.S. Department of Homeland Security and the Social Security Administration, subject to state law requirements. South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Pest Control Technicians do? The primary purpose of this role is to perform our industry leading pest management services for residential customers. You will be responsible for identifying and eliminating pests from residential properties by conducting thorough inspections, determining the type of pest infestation, applying appropriate treatments like pesticides and traps, and providing preventative measures to prevent future infestations, all while adhering to safety regulations and communicating with clients about pest control solutions. Responsibilities include but are not limited to the following: Conduct thorough inspections of client properties to identify signs of pest infestations, damage, and entry points Apply approved pest control products, including chemicals, baits, and traps, to effectively eliminate pests while adhering to safety standards Educate customers on pest prevention methods and the importance of maintaining a pest-free environment. Provide advice on how to reduce the risk of future infestations. Build relationships with customers, schedule and confirm their appointments, help with sales to current customers, and expand our product to new customers Ensure that all pest control equipment is properly maintained, stocked, and in good working condition Adhere to all local, state, and federal regulations regarding pest control products and safety protocols Drive and safely operate a company provided service vehicle (we provide routine maintenance) Essential Job Functions: Working in tight, confined spaces such as basements, attics, crawl spaces, narrow aisles, or passageways Working around animals, insects and termites You’ll sometimes be working around mechanical parts, vehicles, electrical current, heights and scaffolding, fumes, dust, and chemicals, and we’ll train you how to handle all of these conditions safely Able to work both inside and outside in your local climate in company-provided weather gear Lots of moving around — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling, up and down stairs, ladders, scaffolding, ramps, and poles You’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator What do you need? Clean shaven face- for safety reasons (rebreathers have to be able to seal your face) High school diploma or GED; related experience and/or training; or equivalent combination of education and experience Licenses/certificates as required by federal, state, and/or local regulations (covered by us) Available to work Monday-Friday and weekends as needed Open to learning and becoming knowledgeable in all areas of pest control Solid reading, writing, and verbal communication skills Basic math skills — You’ll need to be able to follow instructions for mixing on product labels Customer-facing experience preferred #ZipRTX Base Pay RangeHourly: $18.00 - $20.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Job Duties: • General construction and repair work, • Sheetrock and painting, • Tile and flooring work, • Basic plumbing and electrical repairs, • Demolition and cleanup, • Framing and carpentry work, • Use of hand and power tools, • Job site maintenance and material handling Requirements: • Prior construction or handyman experience preferred, • Must know how to use basic construction tools, • Must be dependable and punctual, • Ability to lift heavy materials and work on-site, • Driver’s license is a plus, • OSHA card is a plus Job Type: • Full-Time / Part-Time Available, • Immediate Hiring Work Location: Queens, Brooklyn, Bronx & Long Island Areas Company Descriptionwww.newsafewayconstruction.comwww.newsafewayconstruction.com

Job Description Job Title: Appliance Repair Technician (Full Time W2) Location: Queens, NY (within 15 mile radius) Job Description: Do you get excited when figuring out how things work? Do you love the challenge of troubleshooting something that's broken? Would you like to have a part in improving the home life of families in your community? If so, we are looking for you! If you value working with people you actually like, having fun while you work, and protecting your free time, this is the place for you. You'll enjoy working with our team. Oh, and did we mention no nights or weekends! Well also give you the ongoing training that you'll need. Responsibilities: As an Appliance Repair Technician, you are the key component in providing excellent customer service by providing high-quality maintenance services for our customers appliances. Here are your primary responsibilities: • Diagnose and repair home appliances and equipment., • Provide cost estimates for repairs., • Effectively communicate with the customer to ensure they understand the services needed., • Order parts and ensure efficient use of company materials., • Collect payment for work performed. Qualifications: • 2+ years of proven experience as an Appliance Repair Technician or similar role, • Familiarity with schematics and technical manuals, • Strong mechanical knowledge and understanding of electrical systems, • Excellent problem-solving skills and attention to detail, • Ability to work independently, • EPA certification and Sealed System Experience is a big plus, • Valid driver's license with a clean driving record and at least 18 years old Benefits & Pay: • The Minimum pay for this position is $20 per hour with potential to make well over $60 per hour, depending on your experience and and the job performance in appliance repairs. You will have the opportunity to earn bonuses and commissions. What We Offer: • No nights or weekends: We value having a solid work-life balance. We work to make a living, without being overworked., • Company-Provided Perks: We provide you with a company vehicle and iPad., • Benefits: Health benefits are offered., • PTO: paid time off and holiday pay, • Sick Pay: Accrual to 48 hours annually, • Fun Team Environment: We stand by our culture and build our team with people that love what they do. If you enjoy taking care of the customer, are awesome at troubleshooting, and love working with your hands and technology, a career as an Appliance Repair Technician could be your future! Apply and join our team today!

Job DescriptionFULL-TIME Home Service Technician (Handyman/Handywoman/Handyperson) TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This role isn’t just about home repairs—it’s about building trust, showing compassion, and delivering a higher standard of service to every customer, every time. What You’ll Do • Perform general home repairs and maintenance tasks with care and professionalism • Support home safety and accessibility for seniors aging in place, • Deliver reliable and respectful service to families and individuals, • Apply skills in carpentry, drywall, flooring, painting, basic plumbing and electrical • Represent TruBlue as a professional, empathetic, and trustworthy home service ally Who You Are, • 5+ years of paid home repair or handyman experience, • Committed to quality, safety, and doing the job right, • Reliable, courteous, and respectful in every interaction, • Comfortable working independently and within a team, • Valid driver’s license and reliable transportation, • Fluent in English and legally authorized to work in the U.S. Why Join TruBlue, • Steady, year-round work with consistent hours, • Flexible scheduling and strong office support, • Company vehicle and gear provided (varies by location), • A trusted team culture built on compassion, integrity, and professionalism • A mission-driven company helping people live better at home Our Values in Action At TruBlue, we live our values every day: • Empathetic – We listen, respect, and serve with integrity, • Trustworthy – Our customers feel safe and confident with our team • Reliable – We show up, follow through, and stand by our work Join Us If you’re ready to use your skills to make a meaningful impact—and want to be part of a team that treats you like family—apply today and become a trusted Home Service Ally. Salary range $25-35 per hour based on experience & qualifications Powered by JazzHR 0b5HfpcKwA

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly. Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary). Delivering with Uber i

Safely drive trucks to customers and meet scheduled customer delivery times. Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and comm

This position is the individual who takes the customers order either at the front counter or on the drive-thru.Additionally, this position will pack the prepared food in holding equipment into the take-out containers to present to the customer.Food preparation of non-fried items such as mashed potat

Great Hours! Looking for a second job? A part-time job? A chance to learn about the pizza business? A job with flexible hours? We deliver all of that! Whether you want to work only a few hours, just the weekend, or only evenings - we can usually make it work for you.

Essential Functions: Customer Service Provides smart customer service at all times through the daily execution of Lowe's customer service policies, procedures and programs Seeks out customers to understand his/her needs and assists in locating, demonstrating, selecting, carrying, and/or loading merc

Great Hours! Looking for a second job? A part-time job? A chance to learn about the pizza business? A job with flexible hours? We deliver all of that! Whether you want to work only a few hours, just the weekend, or only evenings - we can usually make it work for you.

Join a driver-first platform that values your time, respects your hustle, and rewards your effort.

Great Hours! Looking for a second job? A part-time job? A chance to learn about the pizza business? A job with flexible hours? We deliver all of that! Whether you want to work only a few hours, just the weekend, or only evenings - we can usually make it work for you.

Team members work safely and adhere to all food safety and sanitation standards in each area of the department to provide customers with the highest quality service. Company Bonding Events: Playland, Company BBQ, Movie Night, Holiday Party, Gym membership, Discount Cellular Phone Coverage, Holiday C

Join us and be part of something bigger helping to simplify health care one person, one family and one community at a time. Actively listening by giving full attention to what others are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting a

Maintain Parts Inventory - Maintains accurate parts and fleet inventories through proper documentation and transfers in appropriate systems. Typically requires overnight travel less than 10% of the time. With a career at The Home Depot, you can be yourself and also be part of something bigger.

The cashier is responsible for timely, efficient, and accurate cash and credit card transactions and reporting. Must have sufficient mobility to perform assigned production tasks including: constant reaching, bending, stooping, wiping, pushing, and pulling for extended periods of time. For further i

Great Hours! Looking for a second job? A part-time job? A chance to learn about the pizza business? A job with flexible hours? We deliver all of that! Whether you want to work only a few hours, just the weekend, or only evenings - we can usually make it work for you.

This is a Union position with health benefits, paid time off and holidays, pension. FTC has immediate opportunities for experienced Special Inspectors and Field Engineers to be part of our team.

Do you want to be part of an fantastic team? All Team Members will learn about their role and our brand utilizing modern online training program! We'll provide you the training all you need to do is bring a great attitude and a love of great food! Submit that online application and let's get your jo

You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery.You should possess navigational skills to read a map, locate addresses within designated delivery area and must be