Part time electrical jobs in New York, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work, • Physically able to work in extreme temperatures and weather environments (road calls). WORK ENVIRONMENT: • Normal setting for this job is: Inside and Outside with occasional exposure to extreme weather conditions. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $37.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Work Environment • Potentially hazardous work environment with many moving parts and machinery; must be alert of surroundings at all times., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • The Yellow Iron Diesel Technician/Mechanic may be required to lift up to 50 pounds. Frequent squatting and standing is required. Requirements and Qualifications:: Requirements • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $30.00/Hr. Salary Range Maximum: USD $38.00/Hr.

Explore opportunities with Apex Health and Rehab Monroe, a part of LHC Group, a leading post-acute care partner for hospitals, physicians and families nationwide. As members of the Optum family of businesses, we are dedicated to helping people feel their best, including our team members who create meaningful connections with patients, their families, each other and the communities we serve. Find a home for your career here. Join us and embrace a culture of Caring. Connecting. Growing together. As the Senior Living Physical Therapist you will provide age-appropriate services for adult to geriatric patients, including the following: comprehensive assessment, direct treatment to individuals and groups, supervision of treatment delivered by the PTA or tech, development of a home exercise program, patient/family instruction, participation in team and family conferences, evaluation and selection of adaptive equipment, participation in PI programs, and documentation of services according to department and facility standards. This position involves direct patient care. Primary Responsibilities: • Evaluates the patient to determine rehab potential, identifies needs, establishes an individualized treatment plan of care, and sets goals to be used in the team plan of care, • Sets initial STG's and LTG's, • Utilizes equipment in a proper and safe manner, maintains equipment inspection, maintenance and cleaning logs, reports broken or faulty equipment, • Maintains equipment logs for required equipment in the outpatient clinic, • Follows medical regimen developed for the patient. Is aware of and adheres to precautions (THR, TKR, Cardiac, Wound, etc.), • Utilizes the following safe treatment techniques: transfers, positioning, feeding, splinting, paraffin bath, cryotherapy, ultrasound, electrical stimulation, etc., • Completes D/C summary on each patient on their final visit to outpatient PT You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Current Physical Therapy licensure in state of practice, • Current CPR certification, • Current driver's license and vehicle insurance, access to a dependable vehicle, or public transportation, • Demonstrated ability to function in any home situation regardless of age, race, creed, color, sex, disability, or financial condition of the client \n \nPay Range Annual Target Pay - $104,840 - $157,259 Hourly Pay Range - $50.40 - $75.61 Per Visit Point Pay Range - $60.48 - $90.73 Annual total cash compensation for this role assumes full-time employment (40 weekly hours) at full productivity and generally follows the range above. Total cash compensation includes earnings from per visit point pay and hourly pay and is based on several factors including but not limited to local labor markets, education, work experience and may increase over time based on productivity and performance in the role. This role receives two types of compensation depending on the work being performed. When conducting visits, you will be paid per visit point rate compensation. Your per visit pay will be calculated by multiplying your per visit point rate by the productivity points you accrue for various types of visits. Each type of visit is assigned a certain number of productivity points that is inclusive of "direct" and "indirect" patient care activities. Visits are assigned based on patient and business needs. The number of visits performed each week will vary based on individual productivity targets and the productivity points assigned to the visits performed. You will be paid your hourly rate for certain non-visit activities such as orientation. We comply with all minimum wage laws as applicable. In addition to your pay, we offer benefits such as, a comprehensive benefits package, recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. #LHCJobs At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission. UnitedHealth Group is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. UnitedHealth Group is a drug - free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description Position Title Rate of Pay Museum Maintainer $53,997 annually Department Work Location Facilities On-site Reports to Work Schedule Director of Facilities Tues-Sat; 8 am-5 pm FLSA Status Position Classification Union Non-Exempt Full-Time, Regular, Non-Supervisory, Union-eligible Since its founding at the 1964-65 New York World’s Fair, the New York Hall of Science (NYSCI) has inspired millions of people — children, teachers, and families — by offering innovative, participatory ways to learn and encouraging people to explore their curiosity and nurture their creativity. Located in Queens, the most ethnically diverse county in the country, NYSCI welcomes 400,000 visitors each year and serves thousands more through outreach in schools, teacher professional development, and participation in a variety of public events and research initiatives. NYSCI is a leader in the science museum field, recognized for its highly regarded exhibitions, programs, and products, all of which are informed by our inclusive, research-derived approach to STEM learning and engagement called Design, Make, Play. The defining characteristics of Design, Make, Play — open-ended exploration, imaginative learning, personal relevance, deep engagement, and delight — are the ingredients that invite broad participation in STEM and make engagement and learning irresistible. Through this transformative model for STEM exploration, NYSCI engages a broad community of learners in STEM by fostering the excitement of self-directed exploration and by tapping into the joy of learning intrinsic in young people’s play. NYSCI has approximately 95 full-time and over 135 part-time and casual staff members. POSITION OVERVIEW Under general supervision, performs highly responsible work in the inspection, maintenance, and repair of museum buildings, equipment, and facilities, as well as performing related work. Example of Typical Tasks Performs, or supervises the performance of, responsible general maintenance work or specialized work in regard to electrical wiring, plumbing, painting, glazing, stone work, woodworking, shop work, metal work, and automotive repairs. PRINCIPAL RESPONSIBILITIES • Visually inspect buildings, structures, equipment, and vehicles to assess and check for defects, malfunctions, and hazardous conditions., • Perform routine maintenance on buildings, machinery, equipment, appliances, furniture, and facility systems., • Diagnose and repair cosmetic, mechanical, electrical, and plumbing issues., • Maintain HVAC, plumbing, electrical, and other building systems, • Install, adjust, and test new machinery or equipment as required., • Constructs exhibit structures, backgrounds, and mountings., • May perform responsible work in the reproduction of museum publications; or may lay out, construct, paint, and letter signs, markers, and directional indicators., • Respond promptly to maintenance requests and emergency repairs., • Determine the parts and materials needed to repair pending job orders and coordinate with vendors and suppliers to place orders., • Maintain detailed records and generate reports of repairs, inspections, inventories, and maintenance activities., • Ensure all maintenance work complies with safety standards and company policies., • Keep work areas clean, organized, and compliant with safety regulations., • Other related duties and responsibilities, as assigned.QUALIFICATIONS, • High school graduation or high school equivalency required, • Five (5) years of experience in building construction, facility maintenance, or related field., • Must be mechanically inclined, with a strong knowledge of mechanical, electrical, plumbing, and general facility maintenance systems, as well as the ability to independently operate all maintenance equipment, such as hand tools, bench tools, ladders, etc., • Ability to troubleshoot and repair equipment efficiently, • Experience with preventative maintenance programs and maintenance tracking systems., • Ability to read and interpret technical manuals, blueprints, and schematics., • Able to use and/or be exposed to standard maintenance materials and commercial cleaning products, • Knowledge of safe practices in accordance with OSHA standards- wearing proper protective eye wear, gloves, earplugs, and utilizing fall arrest & head gear when appropriate, etc., • Ability to comprehend & apply safety procedures as they relate to Safety Data Sheets (SDS)., • Must be detail–oriented and able to follow oral and written instructionsPHYSICAL REQUIREMENTS, • Ability to lift, pull, push, and carry 50 lbs, • Ability to bend, kneel, stoop, crawl, and climb, • Ability to work in varied physical environments, including outdoors, confined areas, and at height.PREFERRED QUALIFICATIONS, • Technical or vocational training, or a degree in a relevant field, preferred, • Existing FDNY Certificate of Fitness holders preferred, • F1 - Fire Guard for impairment, • F3 - Fire Guard for Indoor Places of Assembly, • F4 - Fire Guard for Temporary Places of Assembly, • S95 - Supervision of Fire Alarm Systems, • OSHA 10/30 Certification preferred, • Fork truck and/or aerial lift certification preferred, • Bilingual Candidate preferred (English/Spanish) PHYSICAL REQUIREMENTS • Mobility: Must be able to move about the building to perform cleaning tasks, including standing, walking, and climbing stairs for extended periods, • Lifting: Ability to lift and carry objects up to 50 pounds, such as trash bags, cleaning supplies, and equipment, • Manual Dexterity: Must be able to use hands to handle, control, or feel objects, tools, or controls, including operating cleaning machinery and equipment, • Reaching and Bending: Must be able to reach overhead and bend down to clean high and low areas, including windows, floors, and furniture BENEFITS NYSCI strives to be an inclusive place to work. We work to foster multiple voices and perspectives, empower staff as problem solvers, and support professional growth for all. The New York Hall of Science also offers generous benefits and perks for all regular full-time employees. These currently include: • Health, dental, and vision insurance options, • Flexible spending accounts for healthcare, dependent care, and commuter benefits, • Pension plan and 401 (k) plan, • Free life insurance coverage, • Paid vacation and sick leave, • 13 paid holidays off, • Flexible work schedules, • Employee Assistance Program, • Free onsite parkingHOW TO APPLY Please upload your resume and cover letter through our online careers page. Please note that while careful consideration will be given to each submission, the Museum will only be able to contact those applicants whose knowledge, skills, and work experience best fit the requirements of the position. Interview Process • Introductory Phone Interview, • Second-round Virtual Panel Interview, • Final Interview on-site at NYSCI Application Deadline: Ongoing until position is filled. No phone calls or faxes, please. The New York Hall of Science is an equal-opportunity employer committed to fostering an inclusive and innovative environment with the best employees. We provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, military service, marital status, or any other protected status in accordance with applicable law. We support a drug-free workplace. If there are preparations, we can make to help ensure you have a comfortable and positive interview experience, please let us know. We recognize that it is highly unlikely that an applicant meets 100% of the qualifications for a given role. Therefore, if much of this job description describes you, then you are highly encouraged to apply for this role.

Job DescriptionCLIENT HIGHLIGHTThe client you’ll be supporting is a Fortune 500 global leader in energy technology, focused on helping the world produce cleaner, more reliable power. Their teams design and improve the systems that keep homes, businesses, and communities running, from gas and wind turbines to the electrical grids that connect them. This is a chance to be part of a company that’s driving innovation, supporting sustainability, and shaping the future of energy.LOCATIONParsippany, New Jersey 07054COMPENSATION $20.90 an hourSCHEDULE3rd shift: 10 PM - 6 AM EST CONTRACT TERM1 year with high likelihood of extension or conversion to full time employee.ONBOARDING • Standard 5-panel drug screen required, • 7-year background checkPOSITION OVERVIEW – We are seeking a reliable and detail-oriented Parts Washer - 3rd Shift. This role is focused on washing and preparing turbine components, operating part washer equipment, clearing residue from parts, and maintaining production and quality standards in a fast-paced manufacturing environment. The ideal candidate is safety-focused, mechanically inclined, and comfortable working independently or as part of a team while handling physical tasks and following detailed work instructions. Responsibilities also include completing work order documentation, maintaining tools and equipment, and supporting overall shop floor operations as needed.RESPONSIBILITIES• Blowing all holes in buckets and nozzles to clear the residue inside., • Load and wash all blown parts in part washer., • Fill out all BOT related to each part and each work orders., • Maintain tools and measuring instruments supplied by company., • Maintain company production and quality standards., • Report unusual problems or conditions to supervisor., • Observe company safety rules and regulations., • Perform, as assigned, other similar or related duties. REQUIRED QUALIFICATIONS/SKILLS• High School Diploma or GED equivalent • Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation, • Ability to work overtime and occasional weekend shifts, • Willingness to wear personal protective equipment, for example: safety glasses, gloves, ear plugs, and safety shoes, • Successful completion of a background check and drug screen, • This role requires use of technical data subject to U.S. Government export restrictions and this posting is only for U.S. Persons (U.S. Citizens, lawful permanent residents and protected individuals (e.g., certain refugees and asylees)). PREFERRED QUALIFICATIONS• Demonstrates positive attitude, strong work ethic, and self-motivation • Has strong ethical stands and integrity, • Experience in manufacturing preferred, • Reading Comprehension - Understanding written sentences and paragraphs in work related documents, • Ability to follow written instructions and take verbal instructions for multiple assembly tasks in a manufacturing shop environment., • Demonstrates strong communication and follow-up skills, • Able to work with computerized shop floor tools, • Strong team player and flexible willingness to move to different areas, • Ability to work alone or as part of a team with minimal supervision

Job DescriptionMAURY MICROWAVE JOB DESCRIPTION Date: January 2026 Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager Brief Summary of Position: The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position • Soldering under a microscope, • Ability to work with through hole and surface mount components, • Ability to work with 0603 components, • Gap welding and wire bonding experience, • Experience with assembly of microwave components, • Ability to follow PCB layout and read electronic schematics, • Ability to be an independent worker and to be part of a team Requirements (education, prior work experience, special skills, etc.) • 1-2 years of prior work experience in a manufacturing environment Job Qualifications and Training: High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: xSafety xCompany Policies xQuality System _ERP

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • Participate in on-call rotations as needed Qualifications • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Strong customer service and communication skills Preferred (but not required) • Ductless/VRF experience, • NATE certification Compensation & Benefits • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job Description❄️ Advance Your HVAC Career with a Trusted Long Island Leader – Join J&E Plumbing and Heating of LI as an HVAC Mechanic! ❄️ Position Title: HVAC Mechanic Company Name: J&E Plumbing and Heating of LI Pay Range: $28–$38 per hour, depending on experience Industry: Plumbing (Residential & Commercial) Job Overview J&E Plumbing and Heating of LI is seeking a skilled HVAC Mechanic with a minimum of 4 years of hands-on experience to join our expanding team based in Baldwin, NY. As we celebrate 10 years of servicing Long Island and grow into our newly acquired headquarters, we are building a strong HVAC division to complement our established plumbing operations. This is an excellent opportunity for a motivated HVAC professional who is ready to grow with a stable, forward-moving company that values quality workmanship, teamwork, and long-term career development. You will work on residential and light commercial HVAC installations, replacements, service, and maintenance projects across Long Island, helping us continue to deliver efficient, high-quality comfort solutions to our customers. Who We Are J&E Plumbing and Heating of LI is a trusted Long Island-based contractor known for delivering exceptional plumbing and HVAC services with honesty, integrity, and professionalism. As a family-oriented and forward-thinking company, we foster a positive, team-driven environment where employees are supported in growing both personally and professionally. With a new headquarters in Baldwin, NY and a decade of proven success, we are entering an exciting phase of expansion — and we’re looking for dedicated professionals who want to build a lasting career with us. Key Responsibilities Install, service, and repair residential and light commercial HVAC systems Perform system diagnostics and troubleshoot heating and cooling equipment Install furnaces, boilers, condensers, air handlers, ductwork, mini-splits, and related components Interpret blueprints, schematics, and manufacturer specifications Ensure all work complies with local mechanical codes and company quality standards Perform preventative maintenance and system inspections Maintain organized job sites and company vehicles Communicate clearly with customers regarding system performance and recommendations Collaborate with plumbing and field teams to meet project timelines Represent J&E Plumbing and Heating professionally at all job sites Qualifications Minimum 4 years of hands-on HVAC experience Strong knowledge of residential and light commercial heating and cooling systems Experience with system installations, replacements, and service calls Ability to troubleshoot electrical and mechanical HVAC components Familiarity with local HVAC codes and safety standards EPA Certification required Valid driver’s license with a clean driving record preferred Strong communication skills and customer-focused mindset Ability to work independently and as part of a team Willingness to travel to job sites throughout Long Island Benefits Competitive Pay: $28–$38 per hour based on experience Weekly Pay with overtime opportunities Retirement: 401(k) with hourly employer contribution Health & Wellness: Medical, dental, and vision insurance (employee share) Time Off: Accrued PTO (up to 60 hours) Career Growth: Paid training, certifications, and advancement opportunities Company Culture: High-morale, team-driven environment with long-term growth potential Work Schedule Full-time Monday to Friday Overtime available based on seasonal and project demands Work Location Based in Baldwin, NY Projects located throughout Long Island (residential and light commercial sites) Daily travel to job sites required Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. #FC25

Job Description The HVAC Technician will focus on the installation, maintenance, and repair of both residential and commercial HVAC systems. This role requires working as part of a small team and occasionally performing emergency or after-hours service. The technician should have a strong foundation in general industry knowledge and prioritize safety compliance while delivering quality customer service. Responsibilities • Install, maintain, and repair residential and commercial HVAC systems, • Troubleshoot and diagnose system issues efficiently, • Perform system testing and safety inspections, • Provide excellent customer service during visits, • Document work performed and maintain accurate records, • Follow all safety regulations and compliance standards, • Occasionally respond to emergency or after-hours service calls Required Qualifications • 2+ years of experience in HVAC technology, • Certification in HVAC technology Preferred Qualifications • EPA Section 608 Certification, • Experience with HVAC system installation and electrical wiring, • Knowledge of refrigeration cycle and diagnostics, • Strong time management and problem-solving skillsCompany DescriptionJoin Manhattan’s Premier PTAC/HVAC Specialists! Weather Makers NYC is looking for skilled HVAC Technicians to join our specialized team. We provide expert installation and repair services across the five boroughs, focusing on high-end residential and commercial PTAC systems. If you’re a problem-solver who takes pride in your craft, we want you on our fleet. The Essentials: Experience: 2+ years in HVAC; EPA Section 608 Certification required. The Role: Install, diagnose, and maintain residential and commercial systems with a focus on efficiency and customer satisfaction. The Perk: Clear career advancement—we actively promote from within to Lead Technician positions. Why Weather Makers? We offer steady, year-round work in a recession-proof niche. Work with modern equipment, a professional team, and a company that respects your expertise.Join Manhattan’s Premier PTAC/HVAC Specialists!\r\n\r\nWeather Makers NYC is looking for skilled HVAC Technicians to join our specialized team. We provide expert installation and repair services across the five boroughs, focusing on high-end residential and commercial PTAC systems. If you’re a problem-solver who takes pride in your craft, we want you on our fleet.\r\n\r\nThe Essentials:\r\n\r\nExperience: 2+ years in HVAC; EPA Section 608 Certification required.\r\n\r\nThe Role: Install, diagnose, and maintain residential and commercial systems with a focus on efficiency and customer satisfaction.\r\n\r\nThe Perk: Clear career advancement—we actively promote from within to Lead Technician positions.\r\n\r\nWhy Weather Makers? We offer steady, year-round work in a recession-proof niche. Work with modern equipment, a professional team, and a company that respects your expertise.

Job DescriptionResidential HVAC Service Technician We invite full-time Residential HVAC Service Technicians to join our team in Union, NJ. Those with no HVAC experience should sign up on our careers page to get updates for Apprenticeships & Helper positions. Who We Are Service Professionals is a family-owned home services company serving most of New Jersey since day one. We do plumbing, heating, cooling, and electrical — and we're not a franchise. We're your neighbors. And we're building something we're proud of. Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We take care of our people — because that's how they take care of our customers. Depending on experience, base pay ranges from $25–$50/hr. With our uncapped performance bonuses, high performers can earn $100,000–$200,000+ in total compensation. Top-of-Market Pay: We benchmark against the industry and aim to beat it. Our bonus program is uncapped and rewards the work you actually do. Full Benefits: Health and dental paid with deductibles covered. 401k for full-time staff. Your Own Truck: Gas card included. Take it home and get dispatched from there — no commute. Real Career Growth: We've promoted from within since the beginning. If you want to grow, we're the spot. Fewer On Call: Everyone in the department does an on-call rotation before you do another. It works out to once every 12-14 weeks. Consistent hours: We can't guarantee hours, but we're committed to dominating local marketing so that we keep the calendars full. Who You Are You're the kind of tech we'd send to our own mother's house without thinking twice. You take pride in doing the job right, especially when nobody's checking. You're comfortable with technology — ServiceTitan, iPads, digital invoicing. It's part of the job. You know how to talk to homeowners. You can sit at a kitchen table, explain the options, and help someone make the right call for their home and budget. You hold yourself to a standard. You track your numbers because you care about being good at this. What You Know Strong residential HVAC knowledge — you've been running service calls and diagnosing real problems in real homes. Solid understanding of safety regulations and local codes. Valid driver's license with a clean driving record. Fluent in English. What Will You Do? You'll run residential HVAC service and repair calls — including the tough ones. You'll diagnose issues, present honest options, and build relationships with customers who call back and ask for you by name. Day to day, that means: Diagnosing and resolving HVAC issues across a range of equipment — furnaces, heat pumps, mini-splits, central A/C, boilers. Spotting potential problems early to prevent callbacks and breakdowns. Walking homeowners through their options — repair vs. replace, financing, service agreements — so they can make an informed decision. Owning your numbers. You'll know your metrics and hold yourself accountable for hitting revenue and service goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions (All Trades and Warehouse Departments) To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. Apply now to join a remarkable team!

Job DescriptionAbout Us: We're growing! New Jersey’s premier HVAC-Plumbing-Electrical company is looking for a full-time, on-site Controls Programmer to join our team. As a family-owned and operated business, we do more than serve customers; we care for our friends, family, and neighbors. We provide personalized residential and commercial services for heating, air conditioning, plumbing, electrical, and indoor air quality applications. Our customers' comfort is an important responsibility and this is a job we have taken seriously for over 60 years! You will join a team of dedicated, supportive, and talented professionals; many of whom have been with us for over 10, 15, and 20 years! And you will become part of a successful, strong, and growing company. Our ideal candidate will be a skilled BAS/BMS programmer fluent with the Niagara N4 platform. As a Control’s Programmer on our team, you will be responsible for programing and troubleshooting the functions of HVAC controllers. You will create front-end building and equipment graphics for a complete building automation system. You will need to build complete wire sheets for projects to be part of a submittal. Responsibilities: • Programing controllers, • Front end graphics, • Wires sheets, • Equipment submittals, • Trouble shooting controller functions, • Minor in-house panel buildsRequirements:, • 2 years of active programing on Tridium Niagara controllers such as Honeywell, Distech and similar platforms, • Tridium Niagara N4/AX programming certification, • Commercial HVAC controls experience, • Proficiency in ready and interoperating construction drawing, wire diagrams, control schematics, mechanical drawings and spec documentation., • Understanding of commercial HVAC equipment sequencing, • Strong problem-solving skills and ability to work independently, • US Citizen or Green card holder – no sponsorship available now or in the future, • Must be able to work Mon-Fri 8 am - 5 pm, with occasional Saturdays (less than 4 per year), • Must be able to work on-site now and in the future, as there is no opportunity for remote workBonus Points:, • Testing and commissioning of Building automations systems, • Collaborate with engineering, field and project management, • BACnet, Lonworks, Modbus, • Direct digital controls (DDC) experience, • Review and audit work completed by junior team members, • IP networking knowledge baseWhat We Offer:, • Market competitive compensation, • Comprehensive benefits package that includes the following -, • 401k w/generous match, • Benefits concierge service for confidential insurance support, • Health insurance (3 plans to choose from), • Prescription drug coverage, • Dental insurance (2 plans to choose from), • Vision insurance, • HSA - Health Savings Account w/Employer contribution, • FSA - Flexible Spending Account, • Life insurance - covered 100% by company, • AD & D insurance - covered 100% by company, • Supplemental Life and AD&D plans, • Aflac supplemental plans, • Employee Assistance Program (EAP), • Identity Theft Protection, • Pet Insurance, • HUSK Marketplace discount access, • Paid time off, • Paid holiday, • Bereavement leave, • Safety forward culture

Job Description General Summary We are seeking a skilled HVAC Technician to join our team to be responsible for the installation, maintenance, repair, and servicing of heating, ventilation, and air conditioning systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team. The HVAC Technician will ensure optimal performance and safety of HVAC systems in compliance with industry standards and regulations. Installs, maintains, services and repairs environmental control systems, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Duties and Responsibilities • Installation, service, troubleshooting and repairs including but not limited to; chillers, air handling units, controls, package units, split systems, exhaust fans, refrigerators, freezers, hot/chilled water pumps. Involvement in Site’s predictive maintenance program so previous experience is highly desirable., • Tasks ranging from operation of systems to the examination and evaluation of equipment to determine needed repairs, • Installs refrigeration and air conditioning systems by positioning compressors, motors, condensers, humidifiers, evaporators, heaters and other components in accordance with design specifications., • Charges refrigeration systems with refrigerant gas tests for leaks., • Starts unit and adjusts it for proper cut-in and cut-out of refrigeration units, humidifiers, heaters, air cleaners, and circulating pumps., • Adjust systems for optimal performance., • Maintains refrigeration and air conditioning systems by checking performance and determining problems. Repairs, adjusts, or replaces defective elements., • Installs, maintains and repairs the electrical and pneumatic systems associated with refrigeration and air conditioning equipment from the safety switch throughout the equipment., • Installs, maintains, repairs, operates all types centrifugal and reciprocating refrigeration/air-conditioning systems; also all types of pneumatic/electro-mechanical temperature controls., • Performs necessary plumbing procedures to ensure operation of systems and equipment, • Performs preventive maintenance., • Involvement in Site’s predictive maintenance program., • Performs other duties and shift coverage, as required. Knowledge, Experience and Skill Requirements • Must have EPA certification per CFR part 82f (Universal preferred) for servicing and recovery of refrigerants., • Ability to read blue prints, sketches, and specifications pertaining to air conditioning and refrigeration systems; to follow oral instructions; to use shop mathematics; to lay out work., • Minimum 4 years of experience performing the specific craft function or certification from a recognized trade school., • Requires broad trade knowledge of mechanical principals on standard shop methods of the Refrigeration and Air Conditioning Mechanic Trade., • Experience and/or certification in one or more predictive maintenance technologies (vibration analysis, infrared, ultrasound, etc.)., • High level of computer aptitude and knowledge of MS Office applications (Word, Excel, etc.)., • Ability to interpret and develop technical reports., • Able to operate testing equipment for the systems; to use all tools and equipment necessary to this trade; to follow standard methods and procedures for the most part, but on occasion to have the ability and knowledge to perform the unusual and difficult operations. Physical, Environmental and Sensory Requirements • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. Disclaimer: CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $35.62. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Join JLL as a Senior Reliability Engineer and drive cutting-edge asset management strategies! You'll revolutionize how we maintain buildings and infrastructure by integrating NOC systems, energy management, and lifecycle planning while analyzing real-time data to optimize performance. Lead root cause failure analyses, conduct maturity assessments, and develop cost-effective action plans that keep critical equipment running smoothly—all while collaborating with our Engineering Services COE to deliver measurable, outcomes-based results that exceed client expectations. On-site full-time at one of our client's facilities in NJ. Here is some of your day: • Deploy strategic asset management roadmaps by integrating BAS data, fault detection systems, maintenance programs, and capital planning to develop lifecycle analyses and repair-versus-replacement recommendations, • Execute site-level reliability programs through periodic audits focused on safety, regulatory compliance, maintenance effectiveness, cost savings, and energy conservation to increase system reliability, • Create and optimize preventative maintenance tasks using Reliability Centered Maintenance approaches, ranking asset criticality and defining cost-beneficial proactive maintenance strategies, • Lead root cause failure analysis investigations on equipment failures, prescribing corrective actions and monitoring follow-up effectiveness to prevent future occurrences, • Implement condition-based maintenance programs utilizing predictive technologies including vibration analysis, oil analysis, infrared thermography, ultrasound, and motor current analysis for rotating equipment, • Develop risk mitigation strategies for critical assets deployable across the portfolio while investigating new technologies for reliability improvements, • Maintain accurate CMMS records including equipment specifications, failure history, and BOM while developing Key Performance Indicators for equipment reliability (MTBF, planned/unplanned work ratios, cost metrics), • Execute multi-discipline facility condition assessments across multiple locations, documenting asset conditions to evaluate remaining useful life and compile portfolio-wide findings for capital planning, • Coordinate engineers, technicians, and third-party resources to accomplish cost-effective reliability improvements while supporting commissioning activities for upgrade and construction projects, • Collaborate actively with Maintenance and Planning groups to ensure appropriate reliability metrics are in place and equipment history is analyzed for future trending Here is who we are looking for: Required • 10+ years implementing RCM and CbM/PdM methods with extensive knowledge of mechanical, electrical, plumbing, and fire suppression systems in commercial, manufacturing, laboratory, or distribution facilities, • Proven experience operating building automation systems, energy management platforms, and CMMS/EAM systems with strong data analytics and capital planning capabilities, • Critical environment expertise preferred (data centers, laboratories, manufacturing) with practical experience developing and optimizing maintenance strategies, lifecycle costing, and total cost of ownership analysis, • Background in multi-disciplinary projects applying system integration techniques across diverse asset types, with experience implementing Management Systems (ISO9001, ISO55001), • Exceptional ability to analyze incomplete data sets, deliver informed recommendations, and communicate complex technical information through clear written and oral reports, • Strong Microsoft Excel proficiency for manipulating large data sets with systematic attention to detail and advanced organizational skills to balance multiple stakeholder requirements, • Proven training, coaching, and mentoring abilities using various tools and techniques while interpreting organizational goals into actionable departmental activities, • Self-motivated collaborative leader with strong interpersonal skills who embraces change, develops innovative solutions, challenges the status quo, and works effectively without direct supervision Preferred • Certified Reliability Leader, • Certified Maintenance Reliability Professional, • Level 2 thermography certification, • Level 2 vibration certification, • Level 2 ultrasound certification, • BS in an Engineering discipline, mechanical or electrical This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Estimated compensation for this position: 140,000.00 – 160,000.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site –Bridgewater, NJ, Carteret, NJ, JERSEY CITY, NJ If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our _. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy _. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our _ which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

HVAC Service Sales Representative - Newark, NJ About the Role We’re looking for a driven HVAC Service Sales Representative to help grow our footprint in the Austin market. You’ll focus on building strong client relationships, uncovering new opportunities, and expanding service agreements that keep our customers running efficiently. If you have a background in mechanical service sales, know how to connect with decision-makers, and can position your team as a trusted long-term partner, this is a great fit. Who We Are We’re a leading provider of commercial and industrial HVAC, controls, electrical, and plumbing services. Our team of nearly 700 professionals supports a wide range of facilities including industrial plants, universities, healthcare systems, airports, and distribution centers. We believe success is shared. When our people grow, our customers win—so we invest heavily in both. What We Offer • Competitive weekly pay, • Comprehensive healthcare (medical, dental, vision, free telehealth, and more), • 401(k) with 5% company match, • Life, short-term, and long-term disability insurance, • Up to 4 weeks paid time off plus 9 paid holidays (veterans receive an additional day), • Career development and training opportunities, • Company vehicle or allowance, phone, uniforms, and boot/pants allowance What You’ll Do • Prospect, qualify, and develop new customer relationships, • Schedule and lead client meetings across your territory, • Build and maintain a strong referral and networking base, • Identify client pain points and present tailored HVAC and controls solutions, • Focus on renewable maintenance agreements, sustainability, and digital service offerings, • Deliver proposals and close new business, • Lead customer kick-off meetings and maintain open communication throughout the relationship, • Retain and expand existing service agreements while supporting billing and collections, • Use CRM tools to track performance and report updates, • Execute territory plans that align with company goals What We’re Looking For • 3-5+ years of sales experience, ideally in HVAC or mechanical services, • Strong communication and presentation skills, • Proven success selling maintenance or service agreements, • Ability to interpret technical information and explain it clearly to clients, • Working knowledge of HVAC systems and controls, • Organized, detail-oriented, and self-motivated Work Environment This is a field-based position with daily travel to customer sites. You’ll spend time in mechanical rooms, rooftops, and other facility areas as you meet with clients and assess systems. Regular standing, walking, and light lifting (up to 25 lbs; occasionally up to 50 lbs) are part of the job. If you’re a motivated relationship builder who thrives on helping clients solve problems and creating long-term value, we’d like to talk.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment. Summary of responsibilities: • Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments., • Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments., • Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures., • Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt., • Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.External Applicants Only – Ground Maintenance Technician (Stationary) hired to work at the LGA airport receive a $5,000 sign-on bonus. You will receive $2,500 after 90 days of employment and the remaining $2,500 after 180 days of employment. The minimum starting hourly rate for this position is $36.22 with the ability to increase your hourly rate within 6 months of your start date, based upon premiums offered. Examples include but are not limited to CIMM Certification, Shift differential, and Skill differential. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Qualified candidates must also possess at least one of the following: • Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems., • PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems., • Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery., • Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems., • 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact candidatecare@delta.com. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability., • Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) • A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

𝗗𝗲𝘀𝗶𝗴𝗻 𝘁𝗵𝗲 𝗽𝗮𝗻𝗲𝗹𝘀, 𝘄𝗿𝗶𝘁𝗲 𝘁𝗵𝗲 𝗰𝗼𝗱𝗲, 𝗮𝗻𝗱 𝗼𝘄𝗻 𝘁𝗵𝗲 𝗳𝗹𝗼𝗼𝗿: 𝗮 𝘀𝗲𝗻𝗶𝗼𝗿 𝗰𝗼𝗻𝘁𝗿𝗼𝗹𝘀 𝗮𝗻𝗱 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗼𝗻 𝗿𝗼𝗹𝗲 𝗼𝗻 𝘀𝗲𝗰𝗼𝗻𝗱 𝘀𝗵𝗶𝗳𝘁 𝗮𝘁 𝗮 𝗳𝗮𝗺𝗶𝗹𝘆-𝗼𝘄𝗻𝗲𝗱 𝗳𝗼𝗼𝗱 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗲𝗿 𝗴𝗼𝗶𝗻𝗴 𝗮𝗹𝗹 𝗶𝗻 𝗼𝗻 𝗿𝗼𝗯𝗼𝘁𝗶𝗰𝘀. 𝗔𝗕𝗢𝗨𝗧 𝗧𝗛𝗘 𝗖𝗢𝗠𝗣𝗔𝗡𝗬 Pave Talent is recruiting on behalf of our client, a privately held, family-owned food manufacturer in Totowa, NJ with over 100 years of combined management experience. They produce for a portfolio of well-known national food service and retail brands from a single, modern facility. The company has roughly doubled its production capacity in three years and is investing hard in robotics and next-generation automation. A robotic palletizer is already installed, with vision inspection on the way. This is a confidential search. 𝗧𝗛𝗘 𝗥𝗢𝗟𝗘 You report to the Engineering Manager and are the senior controls and automation engineer on second shift, 3:00 PM to 12:00 AM. This is a builder's role, not a babysitting role. Yes, you keep production running on your shift. But the bigger half of the job is project work: designing electrical control panels, writing PLC code from the ground up, and standing up new automation. The plant has a real pipeline of capital projects, and you will have your hands on all of it. 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨'𝗟𝗟 𝗢𝗪𝗡 • Design and build electrical control panels for capital projects, from layout and component selection through schematics (AutoCAD Electrical or similar), • Write and commission PLC code from scratch on Rockwell Studio 5000 and ControlLogix, not just modify what already exists, • Lead controls and automation upgrades for production equipment and a plant-wide automated transport system rewrite, • Run the floor on second shift: troubleshoot VFDs, burner controllers, conveyors, point-level sensors, operator interfaces, and networking, and resolve it yourself, • Drive the HMI migration from FactoryTalk View SE to Ignition Perspective and the ongoing ISA-101 standardization, • Support a growing robotics and end-of-line automation roadmap, including the new robotic palletizer and upcoming vision inspection, • Integrate automation systems with the company's Plex ERP platform, • Partner with the first-shift engineering team on cross-shift projects and clean handoffs 𝗪𝗛𝗢 𝗪𝗘'𝗥𝗘 𝗟𝗢𝗢𝗞𝗜𝗡𝗚 𝗙𝗢𝗥 This role needs a genuine controls and electrical engineer, someone who can both design the electrical side and program it. If your background is PLC code only, or troubleshooting only, this is not the right fit. The interview is hands-on and technical, and it will surface the difference. • 3 to 5+ years in controls or automation engineering at a manufacturer, system integrator, or machine builder, • PLC programming from scratch: you have built programs from a blank slate, not only modified or troubleshot existing code. Rockwell Studio 5000 and ControlLogix is the platform here., • Electrical depth: you design control panels, read and trace electrical and safety schematics on the floor, and can size a control or motor circuit, • A real self-starter who can run a shift unguided. The Engineering Manager put it plainly: "We're looking for someone that's more of a self-starter and can do things unguided.", • You can speak to your own project work with specifics: the platform, the application, and what you personally built, • Authorized to work in the US without sponsorship, and able to work fully on-site in Totowa, NJ 𝗔𝗕𝗢𝗨𝗧 𝗦𝗘𝗖𝗢𝗡𝗗 𝗦𝗛𝗜𝗙𝗧 Let's be straight about the schedule, because for the right person it is the best part of this job. Second shift, 3:00 PM to 12:00 AM, means you own the floor. You are the senior automation decision-maker on site, nobody looking over your shoulder, and every fix and every project on your shift carries your name. For a senior engineer tired of being one of five and waiting for project scraps, that is the whole appeal. It is also a calmer build environment: fewer meetings, fewer interruptions, real heads-down time for panel design and code. Your mornings are genuinely yours, for appointments, family, or the gym, with no early alarm, and the commute skips rush hour in both directions. You will not be dropped in cold. You ramp with the Engineering Manager and the first shift before the shift is fully yours. On-call coverage is part of the job, and once in a while that means a weekend. When it does, you get that time back. There is no overtime pay; the flexibility runs both ways. If you want ownership and visibility, second shift is the fastest way to get there here. 𝗡𝗜𝗖𝗘 𝗧𝗢 𝗛𝗔𝗩𝗘 • Ignition Perspective, or other SCADA experience, • FactoryTalk View SE/ME, • AutoCAD Electrical or EPLAN for panel and schematic design, • Machine safety: safety relays, GuardMaster or GuardLogix, Safe Torque Off, • VFD configuration and commissioning (Allen-Bradley PowerFlex or similar), • ERP integration experience (Plex or similar), • Bilingual English and Spanish, a plus for second shift, not required 𝗖𝗢𝗠𝗣𝗘𝗡𝗦𝗔𝗧𝗜𝗢𝗡 𝗔𝗡𝗗 𝗕𝗘𝗡𝗘𝗙𝗜𝗧𝗦 𝗕𝗮𝘀𝗲 𝗦𝗮𝗹𝗮𝗿𝘆: Up to $125,000 (Potentially more for highly qualified candidates) 𝗕𝗼𝗻𝘂𝘀: performance-based, historically up to 15% at year-end 𝗦𝗰𝗵𝗲𝗱𝘂𝗹𝗲: second shift, 3:00 PM to 12:00 AM 𝗢𝗻-𝗖𝗮𝗹𝗹: rotating, with comp time for weekend coverage, no overtime pay 𝗪𝗼𝗿𝗸 𝗠𝗼𝗱𝗲𝗹: fully on-site in Totowa, NJ, easily reached from most of Northern NJ 𝗖𝘂𝗹𝘁𝘂𝗿𝗲: family-owned and tight-knit; strong performers get direct visibility to upper management, and internal mobility is real 𝗛𝗢𝗪 𝗧𝗢 𝗔𝗣𝗣𝗟𝗬 Apply through LinkedIn and we will be in touch. This is a confidential search; your application is fully private. 𝗣𝗮𝘃𝗲 𝗧𝗮𝗹𝗲𝗻𝘁 | 𝗛𝗶𝗿𝗶𝗻𝗴 𝗥𝗲𝗶𝗺𝗮𝗴𝗶𝗻𝗲𝗱

About the Company: V&S Galvanizing is a hot-dip galvanizing service company with nine galvanizing plants strategically located in the United States. Our galvanizing process provides protects fabricated steel from corrosion for over 100 years! We provide the very best solution for corrosion on steel that exists. Our team of experts is dedicated to providing our customers with quality work and reliable service. Position Summary: We are seeking an outstanding Traveling Electrician to support our all of our facilities with a home base near our Lebanon, PA or Amboy, NJ plants. This role requires approximately 60% travel to perform electrical maintenance, troubleshooting, and repairs across our galvanizing operations. Duties and Responsibilities: • Travel to various V&S facilities to perform electrical maintenance and repair on plant equipment at the following locations:, • Perth Amboy, NJ, Columbus, OH, New Castle, DE, Detroit, MI, Jonestown, PA, Johnstown, PA, Memphis, TN, Owego, NY, and Taunton, MA, • Diagnose, troubleshoot, and repair electrical systems including motors, panels, control systems, and hydraulic components., • Perform routine preventative maintenance and scheduled inspections on electrical and mechanical systems., • Run conduit and wiring where needed., • Support local maintenance teams at each site by providing technical expertise on electrical issues., • Perform building and facility-related electrical repairs as needed., • Maintain accurate daily, weekly, monthly, and annual inspection logs., • Ensure a clean, safe, and orderly work environment while adhering to all safety standards and procedures., • Assist with the installation, upgrade, or rebuild of machinery and electrical systems. Qualifications, Physical Demands & Work Environment: • Ability to walk, stand, reach, bend, lift, push, and pull as part of daily responsibilities., • Comfortable working in hot and cold environments typical of industrial facilities., • High school diploma or GED required., • Minimum of 2 years of maintenance/electrical experience required., • Previous electrical experience in an industrial or manufacturing environment preferred., • Ability to work autonomously with little to no direction., • Ability to assist with heavy/major equipment repairs preferred., • Must be able to travel approximately 60% of the time to various V&S plant locations. Compensation & Benefits: We offer a competitive and meaningful compensation package that includes: • Competitive pay: $57,000-$75,000, • Company Vehicle and expense reimbursement, • Paid Time Off, • Paid Holidays, • Premium benefits package including Medical, Dental, Vision, Life, and Disability coverage for employees and families, • 401(k) program with company match

Job Description We are looking for a highly skilled, motivated mechanic to join our crew. We are a full service community garage working at a fast pace in an easy going environment. We offer a bright, clean work environment, competitive salary, and unique job perks for motorcyclists. Only qualified candidates need apply. Thank your for your time and consideration. Job requirements: +Harley Davidson, Honda, Suzuki, Kawasaki and Yamaha technical experience. +Triumph, Ducati and BMW technical knowledge/experience a plus. +Great leadership skills and enthusiastic to train and teach workshops. +Communication skills are crucial to the success of our garage, yours should be top notch. +Must like to be a part of a team. Our tight crew thrives on collaboration. +Ambition is everything at Motorgrrl, the go-getters advance the farthest. +Dedication to quality, our artisanship is our top priority. +Fabrication design skills desired, but not required. +Ability to teach maintenance workshop classes during winter months is a must. Job qualifications: +Class M drivers license. +5 years minimum working as a motorcycle technician. +5 years minimum employed by an accredited shop or dealership. Job responsibilities: Diagnostics, troubleshooting, engine builds, test rides, tune-ups, electrical installs, performance tuning, and telling your co-workers when they have something in their teeth. Fabrication skills is a plus. Job perks: +Open air garage with windows, you will see the light. +Dedicated lunch breaks, we close the garage to prioritize your time. +Employee discounts on gear and parts. Job Type: Full-time Competitive pay will be based on experience, technical skills and leadership.

Supplier Quality Engineer Overview: The Supplier Quality Engineer (SQE) position is responsible to develop positive, partner-oriented relationships with members of MCI’s Supply Chain to continuously improve and monitor supplier performance through auditing and the application of quality tools and performance metrics. The SQE must be a self-motivated individual who possesses the ability to analyze, organize, plan and prioritize assignments/tasks to achieve desired results. This position requires effective interaction with a broad spectrum of people to successfully support operations, customer requirements and the corporate strategic vision. Main job responsibilities: • Identify improvement projects and manages cross functional implementation to improve supply chain performance, • Promote the use of Quality tools and continuous improvement techniques at suppliers to reduce variability, achieve process control and improve the overall quality of processes, systems and MCI’s product(s)/materials., • Develop positive relationships and effective lines of communication with suppliers (partnership-oriented), • Train suppliers to effectively execute Supplier Corrective Action Requests (SCAR), Quality Alerts, Corrective/Preventive Actions (CAPA) implementation, change control and root cause analysis, • Perform periodic audits and evaluate Supplier Quality Systems/processes and flow down of customer requirements to assure conformance to requirements., • Collect and evaluate supplier quality data and performance metrics to manage the Supply Chain score card system., • Recommend suppliers for qualification and/or disqualification based on quality performance, • Evaluate supplier processes, collaborate with suppliers on process improvement and value enhanced opportunities, • Ensure effective communication with MCI Engineering, Operations, Quality Engineering and Procurement to identify opportunities for quality and productivity improvements, • Working directly with suppliers, create corrective action plans and effectively resolve identified issues, • Organize and assume a lead role in presenting the status of “Active Supplier Quality” issues, • Ability to provide training in an effective manner, • Foster a positive, cooperative, and safe work environment through effective communication at all levels of the Marotta organization, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Additional job responsibilities: • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Minimum Requirements: • Minimum of a bachelor’s degree in Mechanical/Electrical/Manufacturing Engineering, • Knowledge of, or experience in a manufacturing/testing environment (Aerospace preferred) Knowledge in the areas of Circuit Card Assemblies (CCA’s) inclusive of IPC J STD-001E/NASA STD-8739 and IPC 610 standards and requirements, • Knowledge of Machining and Measurement processes and equipment., • Minimum of (1) year Quality/Design/Manufacturing Engineering Experience – Supplier Quality field experience preferred, • Knowledge of, or experienced in the areas of special processes (ex. plating, painting, weld, etc.), AS9100 & ISO system standards/requirements, P.O. review/approval, ESD, Foreign Object Debris/damage (FOD) Controls, performance metrics and System/Process audits, • Ability to interpret Military, Commercial aircraft and Space level specifications, dwg’s, and standards, • Knowledge of, or demonstrated track record in the area of Lean concepts, variability analysis, SPC/Process controls, root cause analysis, failure Mode Effects Analysis (FMEA), Six Sigma tools, System/Process auditing, etc., • Knowledge of or experienced use of various measuring/inspection instruments (Coordinate Measuring Machine (CMM), Vision System, mechanical instruments, etc.), • This position requires the eligibility to obtain a security clearance, therefore you must be able to obtain/maintain a security clearance, • Must be a US Citizen Other job requirements: • Must be Computer literate (MS Excel/Word/PowerPoint), flow chart and statistical/analytical software packages, • Strong interpersonal, written, time management, analytical, statistical, problem solving, communication and organizational skills, • Demonstrate the ability to read, interpret documents (i.e. procedures, schematics/technical drawings, etc.), • Position requires a detail-oriented individual who can multi-task, provide leadership (project/assignment related), work in a fast-paced environment and communicate issues in a timely/effective manner. Work Environment: • While performing the duties of this job, the employee is potentially exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, printers/scanners/copier machine, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Some travel may be required for this position (50% travel), • Full time position Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • This position requires the ability to skillfully use measuring instruments, hand tools, • The employee may be required to lift, push, pull and/or move items weighing up to 50 pounds Salary - $87,500 - $115, 000 We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Parsippany, NJ corporate offices location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. If you are looking to grow or accelerate your career and be part of a best-in-class organization while enjoying a work-life balance, please apply! We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY As a Federal Contractor, Marotta is required to have all employees vaccinated against COVID-19 or qualify for a religious or medical exemption. No agencies, please.

Position Summary Our client is seeking a Master-Level Technician who can seamlessly blend electrical expertise, fabrication talent, aesthetic sensitivity, and problem-solving curiosity. This role demands more than technical competence — it requires an individual who views each car as a canvas, each part as an opportunity for innovation, and each challenge as a puzzle worth solving. This position is ideal for someone who was a lifelong tinkerer, understands that modern cars are digital-electromechanical devices, and takes genuine pride in every detail — from relay logic to the precision of a hidden bracket. Primary Responsibilities Electrical Systems & Integration • Design, wire, and integrate custom automotive electrical systems — analog and digital — with OEM-level execution., • Expertly work with 12V systems, high-current circuits, and parasitic draw troubleshooting., • Wire logic-based circuits using Bosch-style relays, solid-state modules, and OEM harness integration., • Build clean, protected, and serviceable harnesses with professional routing and circuit protection., • Modify and reconfigure alternator systems — including ECU-controlled modern alternators and vintage generator systems., • Retrofit vintage systems to modern electrical standards (6V to 12V conversions, etc.). Audio Systems & DSP Tuning • Design and install integrated audio systems in modern and vintage cars., • Execute DSP tuning using JL Audio MAX, AudioTech Fischer, and similar processors., • Install and fabricate enclosures for custom subwoofer and full-range speaker systems., • Understand and compensate for OEM audio system constraints (all-pass filters, phase issues, etc.)., • Perform reference-based tuning with personal media libraries. Fabrication & Craftsmanship • Fabricate custom brackets, panels, and assemblies in metal, plastic, and wood., • MIG & TIG weld as needed for daily project requirements., • Build from raw materials: ABS, acrylics, EPDM, metals, composites, etc., • Modify OEM parts with extreme precision — including plastic shaping, upholstery wrapping, and surface finishing., • Wrap, finish, and detail custom installations to exacting aesthetic and durability standards. Project Planning & Documentation • Organize every component of a build using labeled bins, tags, and photo documentation., • Communicate clearly with the team and clients regarding progress, challenges, and goals., • Help create custom user manuals for each build, documenting non-OEM systems and integration details., • Follow project planning protocols to execute multi-phase builds with precision and accountability. Required Experience & Knowledge • Minimum 5–10 years in advanced custom automotive work, with an emphasis on electrical systems., • Strong grasp of automotive relay logic, circuit design, and parasitic draw diagnostics., • Ability to design and install multi-amp audio systems with DSP, EQ, time-delay, and crossover logic., • Hands-on experience fabricating audio enclosures and integrating systems into exotic or vintage interiors., • Extensive use of multimeters, oscilloscopes, soldering/desoldering tools, and harness-building equipment., • Comfort working on a wide variety of vehicles — from 1950s European sports cars to modern EVs and SUVs.

POSITION: Facilities Engineer DEPARTMENT: Maintenance REPORTS TO: Operations Manager POSITION SUMMARY: The Facilities Engineer is responsible to fulfill the mechanical needs of both the equipment and the physical structure. This position will be responsible for the installation, maintenance, and troubleshooting of all facility equipment and machinery. In addition, he/she will be responsible for some light carpentry, painting, basic plumbing, and other duties required in the maintenance of the building. The Facilities Engineer will have direct responsibility for performing some electrical work throughout the plant and contracting, scheduling, and overseeing the work of outside labor when necessary. This individual will make recommendations regarding purchasing supplies and equipment needed to run the Maintenance Department as well as for scheduling basic equipment maintenance. He/She must consistently and efficiently perform and follow procedures in compliance to company, customer, and ISO standards. PRINCIPAL JOB RESPONSIBILITIES: • Diagnose problems and make repairs on equipment in order to minimize machine ‘downtime’ and, if necessary, schedule outside labor; i.e. factory repair., • Schedule and perform preventive and predictive maintenance on equipment., • Install and/or assist with installation of factory equipment., • Operate all shop equipment including all power equipment., • Perform some sheet metal work., • Perform electrical, plumbing, and other duties required for efficient operation of the physical plant including some HVAC programming., • Complete daily maintenance and repair logs., • Maintain and secure work tools., • Clean and maintain all work areas., • Contributes to team effort by accomplishing related results as needed., • Perform additional duties/projects as assigned by lead, management and/or Supervisor. SAFETY RESPONSIBILITIES: Must learn and comply with all Cultech, Inc. safety rules; reference to employee handbook. PRINCIPAL SKILLS AND FUNCTIONS (5+): • Ability to work independently and as part of a team with a high level of initiative and flexibility., • Capable of understanding technical customer requirements., • Ability to work and multi-task under pressure in a fast-paced environment to meet customer deadlines., • Constantly produces high quality work and maintain established production standards. JOB REQUIREMENTS: • High school education required; College degree with an emphasis on engineering preferred., • Licensed in electrical preferred; proficiency required., • Proficient in machine repair., • Proficient in use of welding equipment., • Knowledge of printing specific equipment, • Skilled in plumbing, carpentry, HVAC, electrical, and piping skills., • Familiarity with OSHA standards regarding potential job hazards and protocols., • Must be able to stand for long periods of time and work in potentially uncomfortable positions., • Ability to work effectively in a team environment., • Must be attentive to detail., • Must be able to comprehend and follow all job procedures and safety protocols. ADDITIONAL REQUIREMENTS: Employees must fulfill the performance standards of this position and comply with policies, rules and procedures of Cultech, including those set out in the Employee Handbook or otherwise communicated (verbally or in writing) to employees.As necessary, employees are expected to manage waste and chemical products properly. This job description is intended to describe the general nature and work responsibilities of the position and is not intended, and should not be construed, to be an all-inclusive list of responsibilities, skills, efforts or working conditions associated with this position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by Cultech management. Employees are required to comply with supervisory instructions and perform other job duties, responsibilities and assignments as requested by supervisors or management. The job responsibilities of this position may include cross training in other functions or positions to ensure satisfactory operation of the department or work area. This job description does not constitute an employment contract between Cultech and any employee.

CONSTRUCTION MANAGER Overview The Construction Manager plays a pivotal role in overseeing day-to-day construction activities, ensuring compliance with released-for-construction documents, and coordinating all work impacting existing AirTrain operations. This role demands a hands-on leader who can balance technical expertise, particularly in electrical systems, with stakeholder coordination to ensure safety, quality, and on-time delivery. The Construction Manager will be full-time, on-site at the project site from NTP (Construction) until First Passenger Service, and part-time thereafter until Final Acceptance and closeout. Qualifications • Education: Bachelor’s degree in engineering, architecture, construction management, or related field (Electrical Engineering strongly preferred)., • Experience:, • Minimum 15 years of construction management experience., • At least one major transit, rail, or airport design-build project with a capital value ≥ $100M., • Strong electrical experience: medium voltage power distribution systems, gas insulated switchgear (GIS), and PSE&G interface., • Licenses/Certifications: Professional engineering or architectural license, or relevant construction certification, preferred., • Other: Familiarity with PANYNJ projects and ability to pass background/badging requirements at EWR Airport., • Light rail and/or people mover systems including electrical experience / power distribution systems. Some experience working for the actual contractor (not just owner side consulting) is preferred. Responsibilities • Manage scope, schedule, budget, safety, and quality of major rail/transit projects., • Coordinate engineering and inspection services; maintain strong client and subcontractor relationships., • Oversee all work impacting AirTrain operations, ensuring direct coordination with the Existing AirTrain Operator., • Lead constructability reviews, change order negotiations, and independent cost estimates., • Review schedules, proposals, invoices, requisitions, and purchase orders., • Manage contractor access/protection requests and ensure compliance with safety regulations., • Act as the owner’s representative in project meetings, presentations, and stakeholder coordination., • Provide oversight on electrical systems integration (MV distribution, GIS, utility interface)., • Lead project teams, ensuring smooth execution and resolution of claims and disputes. Minimum Requirements • 15+ years relevant CM experience., • Proven record on large, complex, lump-sum projects., • Strong background in electrical power systems for transit/rail., • Excellent communication and negotiation skills., • Ability to work independently and proactively manage field conditions., • Must be able to commute to EWR Airport. If you meet these requirements and are ready for a challenging and rewarding role, we invite you to apply. Be part of a dynamic team shaping the future of transportation and construction. Our benefits include Medical, Dental, and Vision Insurance Comprehensive health coverage to ensure employees and their families receive quality healthcare protection. 401(k) Retirement Plan Competitive retirement savings program with up to 4% company matching, helping employees build long-term financial stability. Flexible Work Schedule Empowering employees with the ability to balance work and personal life through adaptable working hours and potential remote work options. Additional Insurance Benefits Life insurance to provide financial protection for employees' loved ones Pet insurance to support employees' furry family members Paid Time Off Flexible time off to promote work-life balance and employee wellness

Job Description The Role Are you a problem solver? A tech-savvy tinkerer? Are you enthusiastic about science and technology? Liberty Science Center (LSC) is seeking a skilled and detail-oriented part-time Exhibit Technician with a specialization in mechanical systems, electronics, and software to support the daily operations, maintenance, and repair of our exhibitions. The Exhibit Technician should be available to work a minimum of three days per week. This role reports to the Senior Manager of Exhibit Services. What You’ll Bring A self-starter with technical chops, you take immense pride in providing exceptional customer service and being able to diagnose and fix problems. What You’ll Do LSC’s part-time Exhibit Technician will perform some combination of the following tasks and responsibilities; however, this is not an exhaustive list so other things may arise as special exhibit needs arise. Exhibit Maintenance: Responsible for daily operations of all Liberty Science Center exhibits, including daily start-up and shut-down procedures for all exhibits, and ensuring all exhibits are operationally functional when the building is open, including during evening and private events Respond promptly to radio calls that identify exhibit issues on the Floor Troubleshoot technical problems related to audiovisual, lighting, and interactive systems down to the component level, diagnosing and resolving issues efficiently Operate oscilloscopes, generators, meters, hand & power tools, as well as service and test computers Test, repair, or replace audio, video, network, and specialty wiring between components. Solder to make repairs and fix device components Conduct preventive maintenance activities to ensure the exhibits are in optimal working condition, including testing, cleaning, and replacing components Create and maintain accurate record keeping and documentation of exhibit maintenance logs, repair history, and inventory management Provide up-to-date information to supervisors, co-workers, and other internal personnel Technology Support and Integration: Support the installation, fabrication, evaluation, and dismantling of exhibits, ensuring proper integration of audiovisual, lighting, and interactive technology components Utilize mechanical drawings, schematics, and product manuals to repair and maintain exhibit technology systems Stay updated on emerging technologies and industry trends related to exhibit technology, recommending innovative solutions for enhancing visitor experiences Safety and Compliance: Adhere to safety protocols and risk management procedures while working in public areas and workspaces, ensuring a safe environment for visitors and staff Maintain a clean, organized, and clutter-free work environment, following proper storage and disposal procedures for hazardous materials Preferred Knowledge, Skills, and Abilities Strong technical aptitude and problem-solving skills in troubleshooting complex technical, audiovisual, lighting, and interactive technology systems Solid understanding of electrical and mechanical principles, including wiring, connections, and basic circuitry Knowledgeable in the use of basic carpentry techniques, hand tools, power tools, paints and adhesives, and associated safety practices Familiarity with control systems, microcontrollers, automation systems, programming languages (e.g., Raspberry Pi, Arduino) and operating systems (e.g., Microsoft Windows, macOS, and Google Chrome) is highly desirable Ability to read, analyze and interpret design schematics, shop/fabrication drawings, and standard business documents Ability to communicate effectively through writing, telephone or in-person Detail-oriented with strong organizational skills, capable of managing multiple tasks and priorities in a fast-paced environment while demonstrating a high level of professionalism, integrity, and dedication to delivering quality work Preferred Qualifications 2+ years of experience providing mechanical and technical maintenance and fabrication support Associates degree, vocational school certification, or other postsecondary education in a relevant technical field, such as engineering, computing, design and fabrication, is considered an asset Prior experience working in a museum, gallery, or similar high traffic environment is a plus Classification & Work Location This is a part-time, non-exempt position, which means this role is eligible for the overtime provision for any hours that extend beyond the standard 40-hour work week at LSC. The ideal candidate must be available to work a minimum of 3 days per week including: weekends, evenings, and holidays as business needs or special events require. This is an on-site position at Liberty Science Center located in Jersey City, NJ, and is not eligible for remote or hybrid work. Physical Demands The Exhibit Technician is required to be on their feet a majority of the day and use their hands to manipulate tools and materials. The Tech will need to perform diagnostics via visual and audio cues and should be comfortable working at various heights, including working on ladders and lifts. Furthermore, the Exhibit Technician should be comfortable maneuvering through large crowds as well as have a tolerance for working in chaotic or loud environments. The ability to lift 40 lbs. will be necessary. Training will be provided to the Exhibit Technician for the safe operation of the following lifts; scissor, toucan and fork lift. LSC’s Work Culture at a Glimpse LSC prides itself on fostering a culture that enables all employees to experience a sense of pleasure, passion, and purpose while in the workplace. We believe in embracing and driving change, inspiring fun and learning, and creating a positive and family-friendly team spirit. Our differences as individuals (race, gender, age, cultural heritage, physical ability, education, and lifestyle) are an asset and contribute to our ability to drive innovation. Lastly, at the heart of our work culture is the commitment to delivering a “wow factor” through our exceptional customer service, not only to our guests but also to one another Our Environment Liberty Science Center is located in a beautiful waterfront state park in Jersey City, New Jersey. Not only is Jersey City easy to get to from any point in Northern NJ and Manhattan, but it also holds the title of the most diverse city in the United States. Employees have access to free parking, the Hudson-Bergen Light Rail, and the NJ Path train. In addition, all employees have access to an on-site café and a terrace with stunning NYC views. Compensation The Exhibit Technician is compensated at a rate of $23.00/hr. Liberty Science Center provides generous perks for all eligible part-time employees, including: Paid time off 25% discount for staff in the LSC store 15% discount in on-site cafeteria LSC Family Membership Free Parking To Apply Please submit a resume and cover letter highlighting why this role and this organization are a good fit for you. _ Liberty Science Center is an equal opportunity employer committed to fostering an inclusive and innovative environment with the best employees. We, therefore, provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, military service, marital status or any other protected status in accordance with applicable law. If there are preparations we can make to help ensure you have a comfortable and positive interview experience, please let us know.

Job Description Join our dynamic team as an Automotive Mechanic and become a vital part of delivering exceptional vehicle repair and maintenance services. In this energetic role, you will diagnose, repair, and service a wide range of vehicles, ensuring optimal performance, safety, and customer satisfaction. Your expertise will keep vehicles running smoothly and efficiently, contributing to our reputation for quality and reliability. This position offers a fantastic opportunity to apply your mechanical skills in a fast-paced environment while growing your career in automotive repair. Duties • Perform comprehensive diagnostics using automotive electrical systems, schematics, and advanced diagnostic tools to identify issues accurately., • Conduct repairs on various vehicle systems including engines, transmissions, powertrains, suspensions, alignments, brakes, shocks & struts, and steering components., • Utilize hand tools and power tools to replace or repair parts such as air brakes, wheel bearings, belts, hoses, and other mechanical components., • Execute routine maintenance tasks like oil changes, tire service, wheel alignments, suspension inspections, and vehicle fluid replacements to ensure peak performance., • Repair or replace auto body components when necessary and perform welding tasks to restore structural integrity., • Read and interpret technical schematics and automotive repair manuals for precise repairs on GM vehicles or other makes., • Provide excellent customer service by explaining repairs clearly and ensuring their satisfaction with the work performed. Qualifications • Proven mechanic experience with a strong background in automotive diagnostics and repairs across various systems., • Dealership experience is highly preferred for familiarity with manufacturer-specific procedures., • Knowledge of ADAS (Advanced Driver Assistance Systems), diesel engine repair, and automotive electrical systems is a plus., • Proficiency with schematics, auto estimating software, and understanding of powertrain components., • Skilled in the use of hand tools, power tools, welding equipment, and other automotive maintenance tools., • Strong mechanical knowledge with the ability to troubleshoot complex issues efficiently., • Experience working on transmissions,, wheel alignments, suspension systems, tire service, shocks & struts repairs., • Ability to work safely following all safety protocols related to air brake systems and other hazardous materials., • Excellent communication skills with a focus on customer service; ability to explain technical issues clearly., • Join us to leverage your automotive expertise in a vibrant environment that values quality workmanship and professional growth! Schedule: Day & Night Shifts, Weekends as needed Supplemental Pay: Bonus opportunities & Commissions Pay Job Type: Full-time Benefits: • 401(k), • Employee discount, • Health insurance, • Paid time off, • Referral program

At Henderson, we're about more than just buildings We're about the people, experiences, and longevity of a building. We're a company of problem-solvers and innovators known for our technical excellence and ability to provide come up with out-of-the-box solutions when it comes to design and construction. We love the process of bringing buildings to life - and keeping them in shape long after the doors open. As an ESOP, each of our employee-owners are an essential part of our mission to lead the industry in innovation, sustainability, and client experience. With a vision to build a better world, Team Henderson has a people-first culture and diverse portfolio of world-class facilities. It's What We Do We provide total building system design and construction services across multiple high-growth markets throughout the country for industry leaders. You'll get to use your talent to work on projects for some of the biggest names in mission-critical, higher education, sports, healthcare, grocery, restaurant, and retail within the sectors we serve in business, community, grocery, health, retail, and venue. It's How We're Different We're about more than just buildings. We're about you. You, and the hundreds of passionate employee-owners who make us who we are. We've always been committed to providing an inclusive workplace where people can bring their full self to work and helps people reach their full potential - both as professionals and individuals. Together, we provide dream up innovative solutions for our clients industry-wide problems, design and construct spaces that become landmarks, and toast the good life at our happy hours. Take a peek into what makes us different here: _ Position Summary: A Plumbing Designer is responsible for designing basic building systems, preparing technical documents and performing engineering calculations in coordination with project teams. As a Plumbing Designer you will have the opportunity to contribute your expertise to our six market sectors, including Business, Community, Grocery & Distribution, Health, Retail, and Venue. Within each sector, we seamlessly integrate our engineering knowledge with the in-the-field experience of our sister company, , to deliver a client experience unlike any other in the industry. To learn more about the facilities included in our sectors check out our website: Key Responsibilities: • Performs calculations and design basic engineering systems in collaboration with experienced design staff., • Prepares system layouts, detailed drawings, and schematics., • Review shop drawings for conformance to plans and specifications., • Prepares or modifies reports, plans, and designs for projects., • Supports business development or pursuit activities., • Participates in client, company and/or industry events to build and maintain professional relationships., • Occasionally visits job sites to verify existing conditions and observe construction progress., • Seeks to fill gaps in industry and/or discipline knowledge on a continuous basis., • Maintains knowledge of common industry software, including Revit, Bluebeam Revu, and Microsoft Office products. Qualifications: • Bachelor's degree in relevant field of engineering (i.e.: mechanical, electrical, fire protection or architectural) and 1 year of experience, or 3 years of experience without degree required., • Basic proficiency in engineering design: basic knowledge of the A&E industry, codes, design guides and standards., • Proficiency with Revit and Bluebeam Revu software preferred., • Completion of the Fundamentals of Engineering (FE) exam preferred., • Excellent communication and interpersonal skills. Let's Talk Perks We take care of our people. As a Henderson employee, you'll enjoy some pretty awesome perks. Trust us, your friends will all have work envy. Culture • Flexible Work Hours (Because we all need to balance work and life.), • Casual Dress Code (Be yourself, please.), • Paid Volunteer Time (We literally pay you to volunteer.), • Paid Parental Leave (Because we know both parents deserve to be there for a new child.), • Health and Wellness Initiatives (Get Fit and Stay Fit.), • Receptive and Forward-Thinking Leadership (Our doors are always open.), • Clear Career Path Options (We want you to excel.), • Benefits, • Industry-leading 401K match and profit sharing (When the company succeeds, we all share in that success.), • Employee Stock Ownership Plan (Yes, our employees are the owners.), • Paid Training for Professional Development (We'll pay for the time you take getting better at what you do.), • Performance Bonuses (When you do well, we reward you for your work.), • Comprehensive and Extensive Insurance (We've got you covered.), • Paid Term Life and Disability (We've got your family covered, too.), • Health Savings Account & Flexible Spending Accounts (We'll help you take advantage of tax savings.), • Paid Time Off and Sick Time off (Take a break. You deserve it!), • Financial Wellness & Coaching Program (Financial security makes you a happier team member.) More information can be found here - _. Henderson Engineers, Inc. and Henderson Building Solutions are EEO Employers/Vet/Disabled and participate in the E-Verify program. Applicants for positions with Henderson Engineers/Henderson Building Solutions must be legally authorized to work in the United States, and verification of eligibility will be required at the time of commencement of employment. All offers will be contingent upon completion of the hiring process including verifications and background checks as required for employment. To all recruitment agencies: Henderson does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Henderson without a prior written search agreement will be considered unsolicited and the property of Henderson. Please, no phone calls or emails. CA: $76,096 - $114,144 CO: $72,160 - $108,240 NV: $68,880 - $103,320 NY: $80,032 - $120,048 DC: $76,096 - $114,144 NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Henderson representatives conduct all email communications exclusively through a company email address that ends with @, @. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Henderson will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. All legitimate job opportunities are posted on our company website's careers page.

Job Description Full or part time Looking for Class A technician at independent repair facility, must have experience with diagnostics in emissions and electrical repair. Competitive wages, medical, 401K and paid vacation for full time employment.

Real people. Real service. At _, we value every individual team member and cultivate a community where people come first. Led by our core values of Generosity, Respect, Innovation, Teamwork, and GRIT, we’re dedicated to maintaining a supportive work environment that celebrates diversity and empowers everyone to reach their full potential. As an industry-leading e-commerce company specializing in HVAC, plumbing, heating, and electrical supplies since 2004, we strive to foster growth while providing the best possible experience for our customers. We are looking for a Product Management Intern to join our Product Team for our 10-week summer internship program. You will report into our Senior Product Manager, and will focus on a variety of tasks, projects, and processes, including meeting with internal stakeholders to conduct UX research on their satisfaction with internal operations systems, creating dashboards of operations data and offering recommendations, diving into systems issues and improvements. If you have an interest in E-commerce, Operations, Product Management, and Software, and are eager to learn more about business analysis and product management, we’d love to hear from you! This remote position is open to individuals who live in, or are open to relocating to, the following states: Arizona, Delaware, Florida, Georgia, Kentucky, Nevada, New Jersey, New York, North Carolina, Ohio, Rhode Island, South Carolina, Tennessee, Texas, Virginia, and Washington. This opportunity requires travel to our headquarters in Melville, NY for an internship on-site meeting on July 14th and July 15th. We reimburse reasonable and necessary travel expenses, and you’re also welcome to work on-site anytime beyond this visit – our doors are always open. Role Type: Intern Location: Remote Length of Program: June 1st – August 7th (10 weeks) Internship On-Site Meeting: July 14th – July 15th Schedule: Monday through Friday, 8:00 a.m. to 5:00 p.m. ET Pay: $20.00 per hour Responsibilities: • Work directly with the Senior Product Manager specializing in Operations and the software and systems that support warehouse management including inventory, order fulfilment and replenishment, • UX: Collect and organize performance data and user feedback from internal users, • Research and Data Analysis: Create reports and dashboards to summarize key metrics and trends, • Documentation: Support the Product and Operations teams with meeting notes, issue tracking, and testing documentation. Document common challenges and best practices, • Communication: Attend team meetings, participate and collaborate with the team to understand issues and find solutions, • Presentation, Findings and Recommendations: Prepare a final presentation highlighting findings, insights, and improvement opportunities Requirements: • Currently pursuing a Bachelor’s degree as a rising Junior or Senior (graduating in 2027 or 2028) with a focus on Business (Accounting, Finance, Management, Marketing, Operations Management, or other business related major), • Excellent verbal and written communication skills, • Comfortable with cross-department collaboration, attending meetings, and learning about software and systems in a fast-paced environment, • Interest in E-commerce, Operations, Product Management and Software, • Ability to collect and analyze data, in addition to making thoughtful recommendations, • Familiarity with Excel and PowerPoint Why work with us: • Experience our culture firsthand – We value generosity and believe that work should be both fulfilling and engaging. From intern socials and team lunches to an on-site visit at our headquarters and opportunities to attend department events, we create experiences that immerse you in our culture, helping you feel like a true part of the team., • Build meaningful connections – Our people-first culture ensures you feel supported and respected from day one. Through meet-and-greets with leadership, networking opportunities, and collaborative projects, you’ll form meaningful connections and foster your professional development., • We’re committed to growth – From everyday learning opportunities to our final presentations, we strive for continuous improvement. You’ll have the opportunity to bring fresh perspectives and innovative solutions to the table, while growing your communication skills in a supportive environment where your ideas are always heard., • Get involved, make an impact – We believe the best way to learn is by doing. Our internship provides real-world experiences through hands-on training, job shadowing, department swaps, and cross-functional teamwork. With a commitment to improvement, you'll gain valuable insights into different areas of our business while strengthening your skills. Check us out and learn more at _! Additional Details: • Remote employees are expected to work in a distraction-free environment. Personal devices, background noise, and other distractions should be kept to a minimum to avoid disrupting virtual meetings or business operations., • Applicants must be currently authorized to work in the U.S. on a full-time basis. SupplyHouse.com will not sponsor applicants for work visas., • SupplyHouse.com is an Equal Opportunity Employer, strongly values inclusion, and encourages individuals of all backgrounds and experiences to apply for this position., • We are committed to providing a safe and secure work environment and conduct thorough background checks on all potential employees in accordance with applicable laws and regulations., • All emails from the SupplyHouse team will only be sent from an @supplyhouse.com email address. Please exercise caution if you receive an email from an alternate domain.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment. Summary of responsibilities: • Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments., • Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments., • Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures., • Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt., • Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.External Applicants Only – Ground Maintenance Technician (Stationary) hired to work at the JFK airport receive a $5,000 sign-on bonus. You will receive $2,500 after 90 days of employment and the remaining $2,500 after 180 days of employment. The minimum starting hourly rate for this position is $36.22 with the ability to increase your hourly rate within 6 months of your start date, based upon premiums offered. Examples include but are not limited to CIMM Certification, Shift differential, and Skill differential. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Qualified candidates must also possess at least one of the following: • Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems., • PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems., • Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery., • Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems., • 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact candidatecare@delta.com. Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability., • Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) • A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Teleo is a robotics startup disrupting a trillion-dollar industry. Teleo converts construction heavy equipment, like loaders, dozers, excavators, trucks, etc. into autonomous robots. This technology allows a single operator to efficiently control multiple machines simultaneously, delivering substantial benefits to our customers while significantly enhancing operator safety and comfort. Teleo is founded by Vinay Shet and Rom Clément, experienced technology executives who led the development of Lyft’s Self Driving Car and Google Street View. Teleo is backed by YCombinator, Up Partners, F-Prime Capital, and a host of industry luminaries. Teleo’s product is already deployed on several continents and generating revenue. Teleo is poised for rapid growth. This presents a unique opportunity to be part of a team that is creating a product with a profound impact on our customers, working on cutting-edge 100,000-pound autonomous robots, engineering intricate systems at the intersection of hardware, software, and AI, and joining the early stages of an exciting startup journey. The Customer Success Technician will work directly with mining and construction customers to install, integrate, and maintain Teleo’s remote operation and AI systems on heavy equipment. This role requires strong hands-on mechanical and electrical aptitude, the ability to work independently in field environments, and a willingness to learn complex, cross-domain systems. • Measuring and integrating mechanical and electrical components, • Installing and optimizing on-equipment systems and network infrastructureT, • roubleshooting mechanical, electrical, and connectivity issues, • Supporting new vehicle, control station, and network deployments, • Performing routine maintenance and service visits, • 2+ years of experience in a Technician or Mechanic role, • Experience in Mining, Construction, Mechanical, Automotive, or other Industrial fields, • Experience integrating mechanical, electrical, and hydraulic systems preferred, • Hands-on experience with electrical systems, including rework and splicing, • Ability to use electrical test instruments (multimeter, continuity tester, etc.)Comfortable working from technical drawings and schematics, • Proficient with computers (email, chat tools, spreadsheets, documentation), • Comfortable using power tools (grinder, drill, fabrication tools) and performing mechanical assemblies, • Physically capable of performing field work, including lifting, climbing, and working on heavy equipment, • Ability and willingness to travel 50%+ to customer sites (regional driving and periodic out-of-state travel), • Strong communication skills and professional customer interaction, • Fluent in English (written and spoken), • Demonstrated willingness to learn and grow in a fast-paced, evolving technical environment, • Strong work ethic and accountability, • Ability to use CAD platforms, • Understanding of electrical diagram platforms, • Comfortable configuring computers and networks$70,000 - $100,000 a yearYou will travel to customer sites (50%+ travel required), operating within customer time constraints and safety conditions to complete installations of Teleo’s hardware, electrical, and network systems This position offers the opportunity to work alongside senior operations leadership and gain experience across mechanical, electrical, networking, and AI-integrated systems. Ideal candidates are physically capable, adaptable in high-ambiguity environments, and eager to grow into increased responsibility over time. Teleo is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All qualified people are encouraged to apply.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Serverfarm is a leading developer and operator of data centers with over 750+ locations and key customer relationships in 45 countries. We're revolutionizing how data centers operate across North America, Western Europe, and Israel, serving the world's leading technology and hyperscale companies. With Manulife Investment Management's acquisition in 2023 and our award-winning InCommand platform we're positioned for explosive growth as AI adoption and cloud migration drive unprecedented demand for data center capacity. A career at Serverfarm means being at the forefront of digital infrastructure innovation, where your work directly impacts how the world's data is managed and secured. As we target 4x growth over the next four years, you'll have unprecedented opportunities to take on new challenges, develop cutting-edge skills, and grow your career across our expanding global operations. Join our team of innovators and help shape the future of sustainable data centers while building a career without boundaries. Serverfarm is seeking an experienced Data Center Mobilization Manager to lead the mobilization of new data center operations, either through greenfield site start-ups or the transition of acquired data centers into the Serverfarm operating model. The ideal candidate will be a Program Manager with experience in data center MEP Operations startup. The role acts on behalf of the business to ensure operational readiness, risk control, and seamless handover into Business-as-Usual operations. Working cross-functionally with Development, Finance, Procurement, People, Product, and third-party service providers, the Mobilization Manager will coordinate, track, and assure all mobilization activities and deliverables through to formal acceptance and handover to the site operational delivery team. • Mobilization Strategy & Governance, • Lead the mobilization strategy for new data center deployments and acquisitions., • Agree Acceptance Criteria for each subsystem and area with Operations Engineering / Development., • Establish mobilization plans, governance structures, and milestones., • Track progress against program timelines and ensure readiness for go-live and handover., • Cross-Functional Coordination, • Function as the central mobilization interface across Development, Finance, Procurement, People, Product, and Operations, • Coordinate internal teams and third-party partners to ensure all mobilization deliverables are aligned and complete., • Ensure mobilization activities support Serverfarm’ s commercial, operational, and customer objectives., • Operational Readiness & Assurance, • Ensure all critical infrastructure is delivered, commissioned, and transitioned in line with Serverfarm design standards, availability targets, and redundancy philosophies., • Confirm readiness for 24/7 mission-critical operations in alignment with contracted customer obligations as part of handover to site operations., • Define and assure the target operational model in line with Serverfarm standards., • Ensure staffing models, training, and competency requirements are met prior to handover., • Review and approve operational documentation including SOPs, MOPs, and EOPs, • Lead readiness reviews and formal go-live approvals., • Ensure compliance with applicable codes and standards including NEC, NFPA, IEEE, CSA (Canada), and local Authority Having Jurisdiction (AHJ) requirements., • Confirm electrical switching procedures, lockout/tagout (LOTO), and emergency operating procedures are in place and validated., • Ensure cooling designs support current and future IT loads, redundancy requirements, and operational efficiency targets., • Review commissioning results, seasonal testing strategies, and mechanical failure response procedures., • Supplier & Transition Management, • Define and mobilize suppliers required to meet warranties and Service Level Agreements., • Function as the primary point of governance with incoming and outgoing suppliers, • Ensure contract obligations, KPIs, SLAs, and mobilization requirements are met., • Support acquisition transitions, including staff transfer oversight where applicable., • Assets, Systems & Data Integration, • Oversee validation of asset registers, O&M documentation, warranties, and maintenance strategies., • Ensure MQTT telemetry data is available on time to operational systems., • Ensure BMS, EPMS, CMMS, & reporting tools are configured to Serverfarm standards., • Support lifecycle planning and fulfilment of critical spare obligations., • Health, Safety & Compliance, • Establish and enforce Serverfarm HSE standards across all contractors, FM providers, and vendors during mobilization., • Ensure compliance with all applicable OSHA (US), provincial/state safety regulations (Canada), NFPA, NEC, CSA, and local AHJ requirements., • Ensure clear HSE governance, roles, responsibilities, and escalation routes are defined and communicated., • Review and approve risk assessments, method statements, and safe systems of work., • Support audits, regulatory compliance, and assurance reviews., • Emergency Preparedness & Response, • Ensure site emergency plans are developed, tested, and aligned with local emergency services., • Support emergency drills, tabletop exercises, and failure scenario simulations., • Validate emergency communications, evacuation procedures, and muster arrangements., • Training, Competency & Safety Culture, • Ensure safety training and certification requirements are defined and met prior to go-live., • Promote a strong safety-first culture across all mobilization activities., • Encourage proactive hazard identification and continuous safety improvement., • Environmental & Sustainability Compliance, • Ensure compliance with environmental regulations related to fuel storage, refrigerants, spill prevention, waste management, and emissions., • Oversee spill response planning and environmental incident readiness., • Support alignment with Serverfarm sustainability and ESG commitments., • Handover to Operations, • Lead the structured handover from mobilization into steady-state site operations., • Confirm performance reporting, governance, and escalation frameworks are embedded., • Support early-life operational stabilization and lessons-learned reviews., • Essential, • Proven experience in data center site start-ups, mobilization, or operational transitions., • Strong understanding of mission-critical data center operations and risk management., • Experience operating in a client-side or owner-operator role., • Strong stakeholder management and cross-functional coordination skills., • Demonstrated ability to manage complex transitions without service disruption., • Strong Program Management experience, • Desirable, • Experience supporting data center acquisitions and integrations., • Knowledge of FM service models and supplier governance, • Familiarity with DCIM, CMMS, and operational reporting platforms., • Personal Attributes, • Highly organized with strong attention to detail., • Calm and decisive in live, high-risk environments., • Confident, challenging suppliers and driving accountability., • Collaborative, pragmatic, and delivery focused., • Travel, • Role involves significant travel (approximately 70%) $140,000 - $170,000 a yearServerfarm is committed to providing an equal opportunity workplace and offers paid time off, paid holidays, 401k and FULL coverage medical, dental and vision. Our compensation philosophy rewards employees for achieving the values and objectives aligned with the company’s goals and strategic initiatives. The listed salary range for this position is an estimate based on the competitive job market. Final compensation will be based on your own individual skills, experience, and location. The above statements are intended to describe the general nature and level of work being performed in this role. They are not intended to serve as an exhaustive list of all possible responsibilities and duties. We encourage you to apply even if your experience isn't an exact match to the job description.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About the Company At Torc, we have always believed that autonomous vehicle technology will transform how we travel, move freight, and do business. A leader in autonomous driving since 2007, Torc has spent over a decade commercializing our solutions with experienced partners. _, we are focused solely on developing software for automated trucks to transform how the world moves freight. Join us and catapult your career with the company that helped pioneer autonomous technology, and the first AV software company with the vision to partner directly with a truck manufacturer. Meet the Team The Self-Driving Truck (SDT) Base Apps at Torc is responsible for developing telemetry and video streaming solutions that enable remote assistance and mission control. As a member of this team, you’ll work on next-generation automotive solutions that interface with electronic control units (ECUs), enabling visibility of the status and health of the truck via the cloud. Essential Duties and Responsibilities • Responsible for software development, including but not limited to, algorithm development, software design, implementation, unit testing, vehicle testing and deployed software maintenance while following quality, build, deploy and test processes, safety and process requirements and guidelines. Includes both Autonomous and Perception Engineers., • Responsible for executing full software development lifecycle activities using primarily C++ skills in Linux development environment using Lean-Agile methodologies., • Responsible to complete software assignments including but not limited to software design, implementation, unit testing, vehicle testing and deployed software maintenance while following quality, build, deploy and test processes, safety and process requirements and guidelines., • Assist in root cause analysis of issues found in testing and process automation steps., • Support team in identifying daily assignments and reporting progress at daily stand ups., • Support software and system level test plans and verification strategies to support ongoing feature development and bug fixes., • Designing and implementing systems responsible for data acquisition and analysis from remote vehicles in the field., • Responsible for ensuring software updates do not regress the software performance by utilizing simulation software and scenarios., • Passion for autonomy technology product area, • Communicate well in a team environment being able to clearly articulate progress, design expectations and support needed to help the team accomplish goals. What You’ll Need to Succeed • Bachelor’s Degree in Computer Science, Robotics, Electrical Engineering, or a related field with 5–7+ years of experience (or a Master’s Degree with 3–5+ years of experience)., • Proven expertise in C++ for algorithm development, system design, and high-performance tooling., • Experience developing embedded software in the automotive industry., • Strong debugging and validation skills in an automotive environment., • Understanding of automotive cybersecurity. Bonus Points! • ROS2 development experience, • Video streaming / H.264 experience, • Experience with cloud interfacing, • Exposure to DevOps practices, CI/CD pipelines, and containerization tools (e.g., Bazel)., • Familiarity with ISO 26262 and development of ASIL-compliant systems. Perks of Being a Full-time Torc’r Torc cares about our team members and we strive to provide benefits and resources to support their health, work/life balance, and future. Our culture is collaborative, energetic, and team focused. Torc offers: • A competitive compensation package that includes a bonus component and stock options, • 100% paid medical, dental, and vision premiums for full-time employees, • 401K plan with a 6% employer match, • Flexibility in schedule and generous paid vacation (available immediately after start date), • AD+D and Life Insurance At Torc, we’re committed to building a diverse and inclusive workplace. We celebrate the uniqueness of our Torc’rs and do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, veteran status, or disabilities. Even if you don’t meet 100% of the qualifications listed for this opportunity, we encourage you to apply. Our compensation reflects the cost of labor across several geographic markets. Pay is based on a number of factors and may vary depending on job-related knowledge, skills, and experience. Torc's total compensation package will also include our corporate bonus and stock option plan. Dependent on the position offered, sign-on payments, relocation, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. Job ID: 102537 Hiring Range for Job Opening US Pay Range $160,800 - $193,000 USD

Waabi, founded by AI visionary Raquel Urtasun, is the leader in Physical AI. With a world-class team, we're unlocking the next era of autonomous transportation with technology that's powering commercial autonomous trucks and robotaxis. Waabi is backed by and partners with world leaders in AI, automotive, logistics, and deep tech. With offices in Toronto, San Francisco, Dallas, and Pittsburgh, Waabi is growing quickly and looking for diverse, innovative and collaborative candidates who want to impact the world in a positive way. To learn more visit: _ The Localization team at Waabi is responsible for answering one of the most critical questions in autonomous driving: exactly where is the vehicle right now? As a Senior or Staff Software Engineer on the Localization team, you will be a domain expert architecting the highly precise, robust state estimation systems that keep our robotaxis and 80,000lb trucks safely on the road. You will design algorithms that seamlessly fuse data across a complex sensor suite to provide real-time, centimeter-accurate pose estimation, even in degraded or GPS-denied environments. You will collaborate with world-renowned engineers and scientists to merge traditional robotics state estimation with Waabi's AI-first approach. You will... • Act as a deep domain expert in state estimation, pushing the boundaries of what is possible in real-time vehicle localization., • Design, implement, and optimize robust algorithms for multi-sensor fusion leveraging IMU, LiDAR, Radar, Camera, GNSS, wheel encoders, etc., • Architect and develop mathematical models to be used in factor graph optimization, Kalman filters, etc., • Develop highly optimized, low-latency Rust code that runs directly on the vehicle's various compute devices in real-time., • Partner with the Perception and Mapping teams to tightly couple map data and semantic landmarks into the localization pipeline., • Build rigorous evaluation frameworks to measure localization accuracy, integrity, fault tolerance across millions of miles in Waabi World (our simulation platform) and on physical test tracks. Qualifications: • BS, MS, or PhD in Robotics, Computer Science, Aerospace/Electrical Engineering, or related field, with a minimum for 5 years of industry experience., • Deep, rigorous domain expertise in probabilistic robotics, state estimation, and 3D geometry (Gaussian estimation, filtering, smoothing, and mapping)., • Proven experience building and optimizing online and/or offline Simultaneous Localization and Mapping (SLAM) systems, including deep knowledge of point-cloud registration algorithms (e.g. ICP)., • Extensive hands-on experience processing and fusing data from physical sensors (IMU, LiDAR, Radar, GNSS, etc.)., • Exceptional systems-level programming skills in modern C++ and/or Rust, with a strong understanding of memory management, concurrency, and real-time computing constraints., • Proficiency in python for data analysis, prototyping, and tooling., • Strong mathematical foundation in linear algebra, calculus, and probability theory., • A proven track record of deploying complex state estimation algorithms onto physical robots or autonomous vehicles operating in the real world. Bonus/nice to have: • Familiarity with industry-standard optimization libraries (e.g., GTSAM, Ceres Solver, g2o)., • Experience with "learned localization" - applying deep learning and AI/ML models to improve traditional state estimation and feature matching., • Experience with high-speed highway autonomous driving constraints.The US yearly salary range for this role is: $141,000 - $242,000 USD in addition to competitive perks & benefits. Waabi (US) Inc.’s yearly salary ranges are determined based on several factors in accordance with the Company’s compensation practices. The salary base range is reflective of the minimum and maximum target for new hire salaries for the position across all US locations. Note: The Company provides additional compensation for employees in this role, including equity incentive awards and an annual performance bonus. Perks/Benefits:- Competitive compensation and equity awards.- Health and Wellness benefits encompassing Medical, Dental and Vision coverage (for full-time employees only).- Unlimited Vacation.- Flexible hours and Work from Home support.- Daily drinks, snacks and catered meals (when in office).- Regularly scheduled team building activities and social events both on-site, off-site & virtually.- As we grow, this list continues to evolve! Waabi is a technology start-up building technologies to transform the way the world moves. Join our talented team to be a part of the future and to make an impact! Waabi is an equal opportunity employer. We celebrate diversity and are committed to creating a supportive, inclusive, and accessible workplace for all our employees. We seek applicants of all backgrounds and identities, across race, color, ethnicity, national origin or ancestry, age, citizenship, religion, sex, sexual orientation, gender identity or expression, military or veteran status, marital status, pregnancy or parental status, caregiver status, disability, or any other characteristic protected by law. We make workplace accommodations for qualified individuals with disabilities as required by applicable law. If reasonable accommodation is needed to participate in the job application or interview process please let our recruiting team know.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Commercial HVAC Technician – Job Description Position Summary: We are seeking a skilled and motivated Commercial HVAC Technician to join our service team. This position is responsible for diagnosing, servicing, repairing, and maintaining commercial heating, ventilation, VRF/VRV, and air conditioning systems. The ideal candidate is dependable, detail-oriented, and capable of working independently in a fast-paced, customer-focused environment. Key Responsibilities: • Perform routine maintenance, diagnostics, and repairs on commercial HVAC equipment including rooftop units, split systems, boilers, and associated controls, • Troubleshoot mechanical, electrical, and control-related issues efficiently, • Complete service calls in a timely and professional manner, • Communicate findings and recommended repairs clearly to customers and management, • Maintain accurate service records, work orders, and time logs, • Ensure all work is performed in accordance with company standards and safety regulations, • Assist with equipment replacements and installations as needed, • Maintain a clean and organized work vehicle and job site Work Schedule & Expectations: • Standard work hours begin at 8:00 AM, • This is a service-based position; technicians may be required to work beyond normal business hours depending on job demands, • Participation in an on-call rotation is required to support after-hours service needs, • Flexibility and reliability are essential Qualifications: • Minimum 10+ years of commercial HVAC service experience preferred, • Strong troubleshooting skills in electrical, refrigeration, and gas heating systems, • EPA Certification (required), • Valid driver’s license with a clean driving record, • Ability to work independently and as part of a team, • Strong communication and customer service skills

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • Participate in on-call rotations as needed Qualifications • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Strong customer service and communication skills Preferred (but not required) • Ductless/VRF experience, • NATE certification Compensation & Benefits • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job Description Summary This position will be located at the East Hanover, NJ location and will not have the ability to be located remotely. This is 1 of 2 roles. Job Description The Insights and Decision Science (IDS) team is dedicated to enabling improved decision making at Novartis by leveraging superior data to identify actionable insights that drive enhanced performance. We collaborate closely with the US business, bringing insights and challenging ideas to empower smarter, data-driven decision-making. Reporting into the ED, AI and Innovation Data Science, this role is crucial in leading the development and deployment of advanced AI solutions that enhance operational efficiency and drive strategic growth across the organization. This position plays a vital role in integrating AI-driven solutions across various platforms, fostering collaboration between the US commercial team and the India-based data science team. By championing the exploration of cutting-edge AI technologies, the Director ensures that our strategies are informed by the latest advancements in generative AI and large language models (LLMs). This role will collaborate with other members of the IDS AI and Innovation team members to create, pilot, and scale AI tools to support broader goals of the IDS strategy to transform business processes and outcomes. Key Responsibilities: • Lead the development and deployment of scalable AI solutions, focusing on advanced AI applications across various business units. Be prepared to engage in hands-on work when necessary to support the team and further our data science initiatives. Collaborate with cross-functional teams to integrate AI-driven solutions across various platforms and services. Drive innovation by staying current with advancements in AI, particularly in generative models and LLM technologies. Champion the exploration and integration of cutting-edge AI technologies, particularly in the field generative AI. Act as a key liaison between the US commercial team and the India-based data science team. Stay abreast of state-of-the-art foundation models and other innovative trends in data science and leverage these insights to inform our strategies. Bring a "can-do" attitude and teamwork and inspire others on culture change. Acts as an AI role model, championing a culture that embraces cutting-edge AI technologies and encourages experimentation and adoption of best practices Experience: Novartis is seeking an individual with proven experience working with machine learning models. They should have a strong ability to support cross-team development of AI programs. A firm commitment to driving continuous improvement in AI solutions, informed by current innovations, is vital to this role. Essential Requirements: • Advanced degree in Computer Science, Engineering, Statistics, or related field Minimum of 10 years of experience in data science, with 6 years of experience in the pharmaceutical industryis preferred. Build and deploy scalable machine learning models using cloud-based services such as AWS and Azure Strong understanding of deep learning algorithms, foundational/ LLM models, statistics, and recommendation system Deep knowledge of Large Language Models (LLMs) such as GPT, BERT, Cohere, and their applications in real-world scenarios. Ability to operate in a hands-on capacity when necessary. Proficient in programming languages such as Python, Spark, TensorFlow, and PyTorch Experience with digital channel selection for "next best action" Excellent problem-solving skills and ability to identify creative solutions to complex problems Strong ability to effectively communicate and work across different time zones The pay range for this position at commencement of employment is expected to be between: $194,600.00 and $312,400.00 a year; however, while salary ranges are effective from 1/1/25 through 12/31/25, fluctuations in the job market may necessitate adjustments to pay ranges during this period. Further, final pay determinations will depend on various factors, including, but not limited to geographical location, experience level, knowledge, skills, and abilities. The total compensation package for this position may also include other elements, including a sign-on bonus, restricted stock units, and discretionary awards in addition to a full range of medical, financial, and/or other benefits (including 401(k) eligibility and various paid time off benefits, such as vacation, sick time, and parental leave), dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. If hired, employee will be in an "at-will position" and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. EEO Statement: The Novartis Group of Companies are Equal Opportunity Employers. We do not discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, sex, national origin, age, sexual orientation, gender identity or expression, marital or veteran status, disability, or any other legally protected status. Accessibility and reasonable accommodations The Novartis Group of Companies are committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or to perform the essential functions of a position, please send an e-mail to us.reasonableaccommodations@novartis.com or call +1(877)395-2339 and let us know the nature of your request and your contact information. Please include the job requisition number in your message. Salary Range $194,600.00 - $361,400.00 Skills Desired Applied Mathematics, Artificial Intelligence (AI), Aws (Amazon Web Services), Big Data, Building Construction, Cloud Computing, Computer Science, Data Governance, Data Literacy, Data Management, Data Quality, Data Science, Data Strategy, Electrical Transformer, Machine Learning (ML), Master Data Management, Professional Services, Python (Programming Language), R (Programming Language), Random Forest Algorithm, Statistical Analysis, Time Series Analysis

Durst Image Technology US has been an industry leader in Digital Imaging for over 80 years. Established in 1936, Durst is a fast-growing company based in Rochester, NY that sells and services large format, label, and corrugated ink jet printers in North America. Our customers are commercial service providers and industrial enterprises, with products requiring a printed surface design. At Durst, you frequently hear "This is the best job I've ever had!" from HQ and field employees alike. We are a financially strong, growing company with products and technology that are on the cutting edge of the digital printing market. Our core, 6-month FSE training program is thorough and includes weeks at our Rochester, NY HQ and in the field shadowing other FSEs. You get to form strong relationships with customers and delight them with outstanding service. You'll have the satisfaction of knowing you made a positive, lasting impact every day. And, you can rest assured that Durst has your back. You can ask literally anyone in the company for help with anything and they are more than happy to assist. Leaders are respected because they walk the walk. Durst prides itself on continued personal and professional development and treating employees like family. Are you the go-to for fix-it assistance in your circle of family and friends? Are you a DIY person who likes working with your hands and mind, tackling challenges, and taking things apart and fixing them? If yes, we want to talk to you! Here are some examples of the skills/experience/hobbies we find typical in our FSE employees: • RC Car and Planes, • Robotics experience, • Automotive repair, • Motorcycle rebuild and repair, • Bicycle repair/modifications, • Small engine repair, • Automation machine repair, • Mechatronics students, • Machine assemblers or repair, • Marine mechanics Now, a bit more about what you'll be doing in this job: The purpose of the Field Service Engineer is to ensure timely and cost-effective installation, repair, removal/relocation, and technical support of Durst products while maintaining a high level of customer satisfaction to all Durst customers. Your specific responsibilities include: • Provide timely and effective installation of Durst products and services., • Perform effective initial customer operator/maintenance training, as required., • Maximize Durst equipment uptime through timely response and effective/efficient repair and maintenance to ensure high levels of customer satisfaction., • Efficiently manage utilization of Durst assets (parts, tools, test equipment, autos) and resources (travel expenses, phone, etc.) to achieve targeted financial results., • Communicate and interact with customers, sales and other service counterparts in a positive, courteous and professional manner and always present a professional image to Durst customers., • Complete all job-related administrative aspects (call reports, part returns, time/expense reporting, etc.) on time and error free. What you bring to the table: To be considered for this position, you must have these qualifications: • Previous experience in printing or related industry, • Great attitude and eagerness to learn, • Strong mechanical aptitude and good dexterity, • Excellent communication and customer service skills, • Proficient computer skills, • High school diploma or equivalent, • Experience or training within some form of mechanical discipline, • Willingness to travel as needed, typically up to 75% of the time (or more during your initial training period) - mostly overnight travel via car and plane throughout USA & Canada, • Valid driver license, • English proficiency, • Ability to safely lift up to 50 pounds and push, pull and reach for boxes and parts weighing up to 50 pounds Bonus points for these nice-to-have but not required qualifications: • Associates degree or equivalent training and/or experience, • At least a few years of field service experience, • Familiarity with reading schematics and wiring diagrams, • Hands-on experience with hand tools, • Working knowledge of multimeters for electrical testing, • Working knowledge of AC and DC up to 3 phase, • Strong understanding of computer hardware and software

Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us. Job Summary: Supermicro is seeking a highly skilled Service Engineer to support our Global Service network and contribute to building a world-class field engineering organization. This role requires flexibility to work in a data center and call center environment, providing technical support via phone and web to customers experiencing hardware and software issues. This position will be based in our office located in Jersey City, NJ. Includes the following essential duties and responsibilities (other duties may also be assigned): Why This Role Matters This position plays a critical role in ensuring customer satisfaction by providing timely and effective technical support. As a key part of our Global Service network, you will troubleshoot issues, deploy hardware solutions, and contribute to a seamless customer experience. Your expertise will directly impact the efficiency and reliability of Supermicro's service operations. What You'll Do • Provide frontline technical support to end-users via phone, email, and ticketing system., • Diagnose and troubleshoot hardware, software, and network-related issues., • Escalate complex problems to higher-level support teams when necessary., • Perform physical installation, rack and stack, cabling, and networking of data center hardware., • Assist in the deployment of server, storage, and networking equipment., • Monitor and maintain data center infrastructure to ensure optimal performance and uptime., • Perform regular maintenance and upgrades on data center hardware and software., • Collaborate with data center staff to address and resolve technical issues., • Conduct quality checks and test system functionality post-installation., • Work with internal teams to gather client requirements and provide technical expertise during the post-sales process., • Coordinate with the engineering team to ensure seamless integration of hardware solutions., • Ensure compliance with data center policies and procedures., • Document and report data center activities and incidents., • Travel up to 50% of the time to customer sites and data centers., • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering; or an Associate's degree in Electrical/Electronics Engineering with equivalent relevant experience., • 1+ year of experience in servicing complex X86 systems and parts., • 1+ years of experience in a customer support role., • Strong hardware system diagnostics skills and understanding of BIOS, drivers, and application-related issues., • Ability to troubleshoot, problem-solve, and make decisions in a fast-paced environment., • Experience with statistical Excel functions or database management., • Ability to manage multiple cross-functional projects concurrently in a rapidly changing environment., • Hands-on experience with enterprise-grade server hardware., • Strong verbal and written communication skills with an emphasis on technical communication., • Punctual, detail-oriented, and proactive in driving solutions., • Experience working in large enterprise environments or certifications in Windows and Linux., • Must have a valid driver's license and a reliable automobile., • Ability to lift/carry at least 50 lbs, • Capable of standing for extended periods to troubleshoot and repair equipment in a noisy environment (approximately 20% of the time) Please note that this position requires regular in-office attendance. The successful candidate is expected to be present in the office during standard working hours as determined by the company. In-office collaboration and participation in team meetings, training sessions, and other on-site activities are essential aspects of this role. Candidates should consider the commuting distance and be prepared to fulfill their responsibilities in the designated office location. $70,304 - $90,000 The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs. Supermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

_ Yellowstone Local is proud to represent Airtronics, a Hickory Company, a leader in residential and light commercial HVAC services. If you take pride in clean installs, solving problems in the field, and being part of a reliable team, this could be the right opportunity for you. Pay range of $25 to $40 per hour based on experience and certifications Full-time, year-round work Overtime opportunities available Performance-based bonus opportunities Sign-on bonus available Medical, dental, and vision insurance 401(k) with company match Paid holidays, vacation time, and sick leave Company vehicle and tools provided Ongoing training and advancement opportunities Clear career path into Lead Installer or Service Technician roles Work with a team that values professionalism, respect, and accountability Join a growing company focused on high-quality HVAC installation and customer service Install modern HVAC systems including heat pumps, ductless mini-splits, and high-efficiency equipment Supportive leadership team that recognizes strong performance Steady workflow across residential and light commercial projects Opportunity to grow your skills and build a long-term career in the trades Install residential and light commercial HVAC systems in New York City and surrounding areas Install central air systems, ductless mini-splits, heat pumps, furnaces, and air handlers Read and interpret blueprints, layouts, and work orders Complete refrigerant piping, equipment setup, and electrical connections Follow local codes, safety regulations, and company installation standards Document job progress and completed work using ServiceTitan Maintain organized and professional job sites Communicate effectively with team members and customers Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Minimum 2 years of HVAC installation experience in residential or light commercial environments EPA 608 Certification preferred or willingness to obtain OSHA 10 certification required; OSHA 30 preferred SST card required for NYC job sites Ability to read technical diagrams and blueprints Valid driver’s license with a clean driving record High school diploma or equivalent Ability to lift equipment and work in varying job site conditions Strong communication and teamwork skills Must be authorized to work in the United States Airtronics, a Hickory Company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status.#yellow

The climate crisis is the defining challenge of our time—but it’s also the greatest opportunity for innovation, and a challenge we’re proud to take on. At Overstory, we’re harnessing cutting-edge technology to enable a resilient electrical grid that keeps communities thriving as our world changes. The grid is the backbone of life as we know it. It powers hospitals, keeps food fresh, and ensures communities stay connected. But extreme weather, aging infrastructure, and growing wildfire risks are putting this critical system under pressure. All of this combined makes the electric utility industry the greatest opportunity for tackling climate change. One of the leading causes of catastrophic wildfires and power outages? Trees and brush coming into contact with power lines. That’s where we help. At Overstory, we use AI and advanced satellite imagery to pinpoint and prioritize vegetation risks before they materialize. By giving utilities critical analysis on those risks, we’re helping prevent outages, reduce wildfire risks, and accelerate the transition to a safer, more resilient grid. Our team spans the Americas and Europe, and we work with utility partners across the Americas and beyond. We’re outdoor enthusiasts, musicians, artists, athletes, parents, and adventurers—15 nationalities strong and growing. What unites us is a passion for solving complex problems, a commitment to climate action, and the belief that technology should be a force for good. Join us to help us build a more resilient world together. As a Staff Engineer, you will lead the development across teams that own core geospatial products and internal data-processing and annotation tools at Overstory. Your breadth of skills will allow you to set a technical vision for the development of the web applications, ETL pipelines, and backend services owned by these teams. Here at Overstory our Staff Engineers are hands-on technical leaders whose influence extends beyond their team either through leading cross team initiatives, making technology choices for critical aspects of our technology platform or solving for critical technical challenges within teams enabling our business to achieve our rapid scaling plans (growing 3x YoY). You’ll lead by example and mentor other engineers to follow good practices regarding software development, system design, team processes, QA and project management. You’ll routinely be involved in other teams’ projects to leverage or enable their own products by giving them access to timely and quality data. You would also occasionally meet with customers to understand their technical needs regarding prospective features. This role will start off being primarily team scoped solving critical scaling challenges. There is scope to expand remit as we grow. • Explore best practices to combine coding agents with software craftsmanship and teach other engineers these practices, • Optimize the orchestration of several object detection and image alignment models, • Design and maintain robust data and feature pipelines for millions of geospatial entities, • Set the technical vision for the development of our internal annotation and QA web applications, • Work closely with your Product Manager to discover and propose new products to solve use cases such as anticipating the impact of an outage at a particular locatio, • You love working in a remote-first, fast-moving environment where collaboration and adaptability are essential., • You are based in Europe (CET, GMT) or Eastern Time (ET) zone (US or Canada) to support teammates both in Europe and on the West Coast, • 7+ years of experience as a Senior or Staff Engineer, Tech Lead, Architect or Engineering Manager, • Strong background building and maintaining scalable web-applications with React, FastAPI, PostgreSQL, • Track record of leading architectural discussions and mentoring other engineers., • Experience with orchestrating and monitoring ML systems in production, • Skilled in designing ETL pipelines with near-real-time orchestration, • Strong communication skills and ability to explain complex technical concepts to various audience, • Experience with the Geospatial ecosystem such as PostGIS, or Deck.GL, • Experience with Dagster, Airflow or similar orchestration frameworks, • Experience with XP practices such as TDD or trunk based development. The team would be new to these practices, • Experience with building web-applications tailored for repeatable human or agentic workflows, • Experience working in B2B, in particular with electrical utilities, • To be part of truly mission-driven work that reduces wildfires, protects earth’s natural resources and helps solve our climate crisis., • Flexible working environment with a lot of autonomy. We build our work days around our lives, not the other way around., • Other benefits like a remote working budget, an educational budget and time to develop new skills., • To be surrounded by an excellent, vibrant, smart team who have each other's back and believe in a culture of openness, tolerance and respect., • Equity and a competitive salary We are a group of 100 people from all over the world. Fifteen nationalities are represented in our team. We work remotely from eleven different countries and we are looking for candidates that are also living and working in one of these countries: United States, the Netherlands, United Kingdom, Ireland, Estonia, Portugal, France, Sweden, Denmark, Switzerland, and Canada. We meet up once a year in-person for our unforgettable team gathering event. We also offer the option to occasionally meet up for in-person collaboration. We place enormous value on diversity and inclusion and strive to continually bring in people of all genders, races, creeds, ethnicities, abilities and backgrounds. We believe that the best ideas emerge when people with different perspectives and approaches work together on a problem. We’re always looking to diversify our team further, but we’re proud of the fact that four out of the nine people on our leadership team are female, 46% of the overall team are female and 20% of the team are people of color. Our team speaks fifteen languages: English, Dutch, French, Spanish, German, Italian, Portuguese, Russian, Luxembourgish, Lithuanian, Bulgarian, Cantonese, Estonian, Danish and Korean. Tackling the climate crisis is our greatest mission. We act with urgency. Our curiosity fuels our growth. We recognize that change is constant, and we find joy and power in exploration. We’re rooted in diversity. Just as ecosystems need biodiversity to thrive, our resiliency comes from our differences. We care for each other. We love the power of machines but we nurture each other as humans. Trust is fundamental. We assume the best in everyone, and we share ideas openly so that we have a positive impact. _ Use of AI in Our Hiring Process We sometimes use AI tools to support parts of our hiring process, such as helping us manage applications more efficiently or ensuring job descriptions are clear and inclusive. But don’t worry, all hiring decisions are always made by people, not machines. Any data processed by AI is handled securely in line with GDPR and our _.

As a Customer Success Manager (CSM), you will play a pivotal role in ensuring our customers achieve maximum value from our platform. You’ll be responsible for onboarding, retaining, and growing customer accounts. Your work will directly impact customer satisfaction, product adoption, and overall company growth. You will work directly with our clients to help solve their problems and ensure their satisfaction while they are active accounts with us. You’ll conduct demonstrations, training sessions and regular check-ins for them. You will also work closely with employees in other departments to ensure customer questions and concerns are addressed in a timely manner. Key Responsibilities Customer Onboarding: Guide new customers through the onboarding process, ensuring a smooth transition and quick adoption of our platform. Relationship Management: Build and maintain strong, long-lasting relationships with key stakeholders in customer organizations. Serve as the primary point of contact for customer inquiries, providing prompt and effective resolutions. Product Expertise: Deeply understand our platform’s features and functionality to provide expert advice and solutions to customers. Conduct regular training sessions, webinars, etc. to educate customers on new features and best practices. Customer Advocacy: Act as the voice of the customer within the company, sharing feedback and insights with the product, sales, and engineering teams to drive continuous improvement. Proactively identify potential issues and opportunities for improvement, addressing them before they impact customer satisfaction. Retention & Growth: Monitor customer health metrics and usage data to identify at-risk accounts and proactively engage to prevent churn. Drive customer renewals and contract extensions, ensuring a high retention rate. Identify opportunities for upselling and cross-selling and lead the negotiation and roll out of additional products or features based on customer needs. Documentation: Assist in creating training courses and educational materials to support hands off customer success initiatives. Collaboration: Work closely with the sales team to ensure a smooth transition between the sales and onboarding process. Collaborate with the product team to influence the product roadmap based on customer feedback. Who You Are 3-5 years of experience in customer success, account management, or a related role, preferably in B2B SaaS or the construction industry. Preference given to individuals with experience working in the construction industry (electrical, mechanical or general) or with construction-related technologies. Strong communication and interpersonal skills, with the ability to build rapport and trust with customers both verbally and written. Excellent problem-solving abilities and a customer-first mindset. Technical aptitude and the ability to learn new software platforms quickly. Data-driven approach to decision-making, with experience using customer success platforms or CRM tools (e.g., Salesforce, MS Office, etc.). Take a sense of ownership in the work that you do. Self-motivating and able to work with minimal supervision. Possess a client service mentality, are adaptable and willing to collaborate openly with other people About Remarcable, Inc. Remarcable is a Series A–funded SaaS company revolutionizing how contractors work. Founded by an engineer to solve the inefficiencies he faced in the field; our platform eliminates procurement and operational friction for the construction industry—especially electrical contractors. Our award-winning, SOC 2 Type II–certified B2B marketplace has processed billions in material purchases, connecting contractors, suppliers, and accounting systems in one seamless workflow. From procurement to AP automation, we deliver real-time visibility and control in a market long overdue for innovation. Backed by Insight Partners, we’re scaling fast—fueling product innovation, deep ERP integrations, and rapid go-to-market growth. Join our builder-led, high-ownership team and make a real impact in an underserved, multi-billion-dollar industry. Why Join Us? At Remarcable, you’ll work on a complex, high-value product that’s solving critical pain points for contractors across North America. You’ll be part of a small, talented team shaping the future of construction technology—operating in a vertical SaaS + marketplace model with ERP-style sales motion, sticky customer relationships, and the potential to reshape an industry. We offer full benefits including Medical, Dental, Vision, STD and Life insurance (100% Company-paid for the Employee). We also offer a 401(k) with company match and bonus potential. Our Mission To advance the adoption of technology in the construction industry and bring better efficiency, visibility, and communication to our customers. Job Details • Full-Time, • Benefits: Standard Remarcable Package, • PTO: Two weeks per year in the 1st year

The Role: SnapLogic is seeking a Staff Software Engineer to join our Agent Creator Team. This pivotal role will have you leading the development and enhancement of Snaps — our modular integration components — with a focus on agents and Generative AI capabilities. As a Staff Software Engineer, you’ll take ownership of the design, development, and deployment of complex integrations that utilize cutting-edge AI technologies to drive automation and enhance product functionality.Your role will involve shaping the architecture of next-generation agent-based integrations, leveraging Generative AI to simplify and streamline workflows. Beyond technical expertise, we are looking for someone who can also act as a coach to empower and mentor junior engineers, fostering both technical and professional growth within the team. This is a remote role with required travel to our San Mateo, CA HQ or for candidates located in San Francisco Bay Area, it will be a hybrid role with two days per week working at our San Mateo, CA HQ. • Develop and Innovate with AI: Lead the development of agent-based Snaps that leverage Generative AI to dynamically configure and adapt integrations across a wide range of platforms and data sources. You’ll design Snaps that simplify complex configurations using AI-driven approaches, enabling intelligent automation., • AI-Driven Product Design: Work with a forward-thinking approach to integrate AI and machine learning into Snaps, enhancing the user experience and enabling seamless, self-configuring integrations., • Coaching and Mentorship: Foster a collaborative and growth-oriented environment by coaching junior engineers and helping them develop both their technical expertise and career skills. Lead by example in creating a culture of learning, high standards, and accountability., • Cross-Functional Collaboration: Partner closely with product managers, data scientists, and other engineering teams to ensure that AI capabilities align with customer needs, and that products are built for scale and reliability., • Rapid Learning and Application: Stay ahead of the curve by rapidly learning and applying new Generative AI technologies and methodologies to solve integration challenges, while simultaneously ensuring the highest standards of code quality., • Debug and Troubleshoot Complex Issues: Quickly diagnose and debug issues in agent-based integrations, utilizing AI-assisted tools and debugging techniques., • Agile and Adaptive: Work on multiple, fast-paced projects while adapting quickly to new technologies and challenges., • Deep Expertise in Java: You have advanced proficiency in Java, object-oriented programming, and creating efficient, secure code., • AI and Generative AI Knowledge: Experience working with Generative AI models, automation tools, or similar technologies that facilitate intelligent, self-configuring integrations., • Leadership and Mentorship: You have experience coaching and mentoring team members, providing constructive feedback, and leading by example. You understand the importance of nurturing technical growth and building a collaborative, positive team culture., • Experience with Integration Protocols: You are skilled in working with web, network, file (JSON/XML/Parquet), and messaging protocols (HTTP, SOAP, REST, etc.), and have experience with APIs., • Strong Testing and Debugging Skills: You understand the importance of testing and debugging in delivering reliable enterprise software., • Initiative and Ownership: You work independently and take ownership of your projects, always seeking new opportunities to improve processes and products., • Customer-Centric Mindset: You are focused on delivering solutions that meet customer needs, ensuring that products are user-friendly and high-performing., • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or a related field with 8+ years of relevant experience, OR, • Master’s degree with 6+ years of relevant experience.$160,000 - $180,000 a yearThe above range is the approximate annual U.S. base pay range for this position. Final offer amounts are determined by multiple factors, including candidate location, experience and expertise, and may vary from the range listed. In addition to base salaries, certain roles are also eligible for annual cash bonuses or commissions. All of our full time employees get stock options and a comprehensive benefits package.Why Join: There's never been a better time to join our SnapSquad! At SnapLogic, we believe our people are the heart of our success. That is why we are dedicated to creating an environment where you can thrive both personally and professionally. From competitive salaries and robust health benefits to global wellness initiatives, we ensure you’re set up for success - wherever you’re based. Here’s why you don’t want to miss out on being a part of our team: A Legacy of Excellence - Recognized Industry Visionary and Leader:When it comes to innovation and growth, SnapLogic isn’t just keeping up; we’re setting the pace. Recognized by in 2024, our trajectory speaks volumes. For the third consecutive year, SnapLogic has been named a Visionary in the , where we’ve been praised for our expanding platform and generative AI innovations. And that’s not all—Aragon Research has highlighted our leadership in the tPaaS Globe Report, calling our generative AI capabilities a major differentiator that puts us ahead of the competition. Redefining the Integration Category in the Age of AI: In an era where enterprises are reimagining themselves as composable, data-driven entities, SnapLogic is at the forefront, unlocking new possibilities through generative AI and AI-augmented, graphical-visual integration. SnapLogic is not just making integration accessible to highly technical experts, but also to business technologists seeking simplicity. SnapLogic’s comprehensive, highly scalable platform transcends traditional boundaries by unifying application and data integration, API management, and automation. It’s not just another iPaaS platform - we’re a catalyst for agility and innovation, enabling businesses to seize the future today. Innovation at the Forefront:SnapLogic was first to market with the world’s only generative integration solution, SnapGPT, empowering users to integrate faster and easier. With open source and proprietary large language models (LLMs) and artificial intelligence, SnapGPT enables users to integrate any applications or data sources with natural language. Since launching SnapGPT in early 2023, SnapLogic has launched _, including AgentCreator which empowers everyone to create GenAI-powered automations and applications without coding. Thousands of enterprises around the globe rely on SnapLogic to integrate, automate and orchestrate their data – across their business and now they’re looking to SnapLogic to help them unlock the next frontier of generative AI. Join Us on Our Journey At SnapLogic, we're changing the way the world works with data—and we want you to be part of that change. If you're ready to push boundaries, embrace innovation, and lead the charge in transforming industries, we want to hear from you. SnapLogic is headquartered in San Mateo, CA, with team members located across the globe. No matter where you’re based, we offer a dynamic, collaborative, and forward-thinking environment that fosters growth, creativity, and success. Are you ready to join the SnapSquad and shape the future of generative integration? We can’t wait to see your application!

The climate crisis is the defining challenge of our time—but it’s also the greatest opportunity for innovation, and a challenge we’re proud to take on. At Overstory, we’re harnessing cutting-edge technology to enable a resilient electrical grid that keeps communities thriving as our world changes. The grid is the backbone of life as we know it. It powers hospitals, keeps food fresh, and ensures communities stay connected. But extreme weather, aging infrastructure, and growing wildfire risks are putting this critical system under pressure. All of this combined makes the electric utility industry the greatest opportunity for tackling climate change. One of the leading causes of catastrophic wildfires and power outages? Trees and brush coming into contact with power lines. That’s where we help. At Overstory, we use AI and advanced satellite imagery to pinpoint and prioritize vegetation risks before they materialize. By giving utilities critical analysis on those risks, we’re helping prevent outages, reduce wildfire risks, and accelerate the transition to a safer, more resilient grid. Our team spans the Americas and Europe, and we work with utility partners across the Americas and beyond. We’re outdoor enthusiasts, musicians, artists, athletes, parents, and adventurers—15 nationalities strong and growing. What unites us is a passion for solving complex problems, a commitment to climate action, and the belief that technology should be a force for good. Join us to help us build a more resilient world together. At Overstory, the Enterprise Customer Success Manager is responsible for building deep, strategic relationships with our most important customers - guiding them through delivery seasons, driving organizational change, and expanding and renewing contracts. With a strong grasp of both customer needs and the Overstory platform, your goal is to make our customers measurably successful. Time Zone/Location Requirement: San Francisco Bay Area/ PST • Manage 1-3 of our most strategic accounts in California, serving as their primary point of contact and trusted advisor., • Strengthen and expand relationships with key stakeholders, continuously understanding their evolving needs and what drives success for their organization., • Coordinate with technical teams to ensure feasible planning and on-time, high-quality execution throughout the delivery season., • Drive change management and adoption - working closely with customer teams to embed Overstory into their workflows, build internal champions, and ensure the product delivers lasting value across the organization., • Work closely with the product team to inform the roadmap. Because of your deep proximity to customer needs, you will have a meaningful opportunity to shape how the product evolves., • Identify and execute on expansion opportunities - including upsells and new product adoption - to grow the strategic value of each account., • You have worked with California-based utilities., • You have a demonstrated track record of driving real outcomes in the utility sector - including measurable operational improvements, successful program rollouts, and organizational change that sticks., • You have experience leading change management efforts within large, complex utility organizations - navigating stakeholders, building buy-in across levels, and turning new technology or processes into lasting workflow adoption., • You have 5+ years of experience in a customer-facing role, with a track record of successfully managing complex projects from start to finish., • Commercial experience that has contributed to business growth - whether in customer success, consulting, or an equivalent role., • Empathy: You are empathetic and build strong relationships. You can easily step into the shoes of customers to understand their perspective, challenges and needs. You want to make our customers successful., • Communication: You are an excellent communicator with non-technical and technical stakeholders from the customer and the Overstory team., • Project management: Strong project management skills, including the ability to plan and coordinate multiple projects at the same time. With your organization skills and ability to set people in motion you bring projects to a successful conclusion., • Commercial thinker: You are commercially savvy and have the ability to drive customer conversion, retention and growth. If you don’t meet all of the above yet feel you have lots to offer, please apply anyway. • To be part of truly mission-driven work that reduces wildfires, protects earth’s natural resources and helps solve our climate crisis., • Flexible working environment with a lot of autonomy. We build our work days around our lives, not the other way around., • Other benefits like a remote working budget, an educational budget and time to develop new skills., • To be surrounded by an excellent, vibrant, smart team who have each other's back and believe in a culture of openness, tolerance and respect., • Equity and a competitive salary We are a group of 100 people from all over the world. Fifteen nationalities are represented in our team. We work remotely from eleven different countries and we are looking for candidates that are also living and working in one of these countries: United States, the Netherlands, United Kingdom, Ireland, Estonia, Portugal, France, Sweden, Denmark, Switzerland, and Canada. We meet up once a year in-person for our unforgettable team gathering event. We also offer the option to occasionally meet up for in-person collaboration. We place enormous value on diversity and inclusion and strive to continually bring in people of all genders, races, creeds, ethnicities, abilities and backgrounds. We believe that the best ideas emerge when people with different perspectives and approaches work together on a problem. We’re always looking to diversify our team further, but we’re proud of the fact that four out of the nine people on our leadership team are female, 46% of the overall team are female and 20% of the team are people of color. Our team speaks fifteen languages: English, Dutch, French, Spanish, German, Italian, Portuguese, Russian, Luxembourgish, Lithuanian, Bulgarian, Cantonese, Estonian, Danish and Korean. Tackling the climate crisis is our greatest mission. We act with urgency. Our curiosity fuels our growth. We recognize that change is constant, and we find joy and power in exploration. We’re rooted in diversity. Just as ecosystems need biodiversity to thrive, our resiliency comes from our differences. We care for each other. We love the power of machines but we nurture each other as humans. Trust is fundamental. We assume the best in everyone, and we share ideas openly so that we have a positive impact. _ Use of AI in Our Hiring Process We sometimes use AI tools to support parts of our hiring process, such as helping us manage applications more efficiently or ensuring job descriptions are clear and inclusive. But don’t worry, all hiring decisions are always made by people, not machines. Any data processed by AI is handled securely in line with GDPR and our _.

Job Description HVAC INSTALL TECHNICIANS - LEAD INSTALLERS NEEDED ASAP! We are BUSY! NOW HIRING! Sign on Bonus of up to $7500! RUSSO BROS, East Hanover, NJ & Surrounding Counties! Experienced, Seasoned INSTALL LEADS - This HVAC Team is BUSY & GROWING! Great opportunity to join our Team! Our best Techs with a proven track record have top earning potential $$$ - join our team today!!! Earn $35.00-$45.00 /hr+ Incentives- Opportunity to earn up to $130K yearly! Sign on Bonus of up to $7500! We’re looking for a detail-oriented & experienced HVAC installation technician to join our team. You’ll be responsible for installing heating, cooling, indoor air quality, & ductwork systems to manufacturers & codes by local jurisdiction. Candidates to consider will have proven experience installing residential boiler systems As an HVAC installation technician, you will work as part of a dynamic team providing 5-star customer experience by utilizing your expertise in the HVAC industry. The ideal candidate has the technical skills to understand wiring diagrams, local codes, installation of equipment, while ensuring the equipment is configured and operates properly. Ready to join our growing HVAC team? The position will be based in the field, with your very own company-provided take-home truck. WHY WORK FOR RUSSO BROS? • Highly competitive wages, • Industry leader and ongoing bonus potential, • Thriving customer base with consistent work all year, • Fully stocked, take-home company truck, E-Z pass, gas card, cell phone, and tablet. No need to come to the “shop” everyday!, • Strong company culture – Annual employee appreciation party, rewards & recognition, • Top Branch Leaders: RUSSO Brothers East Hanover NJ, Branch known for its leadership team! Come work for the best!, • Benefits: Competitive Dental, Vision, and Healthcare Plan, 401(k) matching, Short-Term and Long-Term Disability, Life Insurance , PTO & Paid Holidays, Employee Assistance Program (EAP) What You’ll Do: • Install, replace, and service heating, air conditioning, air quality, and refrigeration systems., • Connect electrical wiring and control systems according to diagrams and safety codes., • Join fuel, water, and refrigerant lines to HVAC systems andtest forleaks., • Use electrical testing equipment to check circuits, calibrate components, and ensure safe operation., • Maintain clear communication with theDispatch,Parts, andInstallationteams, as well as your manager., • Keep your company vehicle clean, organized, and properly inventoried., • Complete all required documentation accurately and on time., • Enter completed projects and parts usedintothe database., • Educate customers on proper system use and maintenance., • Follow all company, industry, and safety standards at all times., • Participate in ongoing training to advance your skills and certifications., • Perform other duties as assigned. What We Are Looking For: • Valid driver’s license a MUST, • High school diploma or equivalent., • 2+ years of HVAC installation experience + Universal EPA, • Candidates will have proven experience installing residential boiler systems, • Strong work ethic and commitment to quality craftsmanship., • Basic understanding of electrical wiring, connections, and system components., • Comfortable working in attics, crawl spaces, and tight environments., • Excellent communication, problem-solving, and customer service skills., • Professional appearance, positive attitude, and team-oriented mindset., • Ability to lift upto 50lbs, climb ladders, work in attics, crawl spaces, and other residential environments., • Experience usingServiceTitanor similar software a PLUS, • NATE Certified a PLUS Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job DescriptionHVAC Technician – Job Description Location: Newark, NJ Pay Rate: $22-$28/ Per Hour Position Summary We are seeking a skilled HVAC Technician to install, maintain, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems for residential and commercial properties in the Newark, NJ area. The ideal candidate will have strong diagnostic skills, knowledge of HVAC systems, and the ability to provide excellent customer service while ensuring all work is completed safely and efficiently. Responsibilities • Install, inspect, maintain, and repair HVAC systems and equipment, • Diagnose electrical and mechanical issues with heating and cooling systems, • Perform preventive maintenance and system inspections, • Repair or replace compressors, motors, thermostats, condensers, and other HVAC components, • Test HVAC systems for proper operation and efficiency, • Read and interpret blueprints, wiring diagrams, and technical manuals, • Ensure compliance with EPA, OSHA, and local safety regulations, • Maintain accurate service records, work orders, and inventory, • Respond to emergency service calls when needed, • Communicate professionally with customers regarding repairs and maintenance recommendations Qualifications, • High school diploma or GED required, • HVAC certification or technical training preferred, • EPA Section 608 Certification required/preferred, • Previous HVAC technician experience preferred, • Strong troubleshooting and mechanical skills, • Knowledge of refrigeration systems and HVAC controls, • Ability to work independently and as part of a team, • Valid driver's license with clean driving record, • Ability to lift heavy equipment and work in various weather conditions Preferred Skills, • Commercial and residential HVAC experience, • Experience with rooftop units, boilers, chillers, and furnaces, • Knowledge of smart thermostats and energy-efficient systems, • Excellent customer service and communication skills, • Time management and organizational abilities Work Environment, • Indoor and outdoor work environments, • May require climbing ladders, working in tight spaces, and lifting heavy equipment, • On-call, overtime, and weekend availability may be required depending on workload and emergencies

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Technician (GMT) in a motorized role, you will be a part of Delta’s Ground Support Equipment team. A GMT (Motorized) specializes as a vehicle/heavy equipment mechanic, repairing vehicles and a variety of airport systems and equipment. This opportunity requires the completion of a two-year degree at a post-secondary technical school or a minimum of three years of demonstrated ability. Summary of responsibilities: • Inspects, services, troubleshoots, repairs, replaces, and overhauls all components like truck chassis, body, and drive-train components on a diverse body of equipment., • Electrical and hydraulic troubleshooting and repair, painting, bodywork, and technical work., • Completing data entry to record work assignments and connecting with other company personnel as needed., • Repair and perform maintenance on mix of motorized equipment as well as bodywork and other technical work.External Applicants Only – Ground Maintenance Technician (Motorized) hired to work at the [Airport Name] airport receive a $5,000 sign-on bonus. You will receive $2,500 after 90 days of employment and the remaining $2,500 after 180 days of employment. The starting rate for this position can increase within 6 months of your start date, based on premiums offered. Examples include, but are not limited to, ASE Certification, CIMM Certification, shift differential, and skill differential Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Internal Movement EligibilityInternal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta’s recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta’s recruitment team, you can contact candidatecare@delta.com. What you need to succeed (minimum qualifications) • Consistently prioritizes safety and security of self, others, and personal data., • Embrace diverse people, thinking, and styles., • Possesses a high school diploma, GED, or high school equivalency., • Is at least 18 years of age and has authorization to work in the United States., • Must have a valid driver's license., • Must be proficient in English., • Ability to lift items weighing between 50 and 70 pounds., • Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays., • Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) • A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas., • Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics., • Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors., • Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience and Servant Leadership – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: • Competitive salary, industry-leading profit sharing program, and performance incentives., • 401(k) with generous company contributions up to 9%., • New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31)., • In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period., • LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program., • 10 paid holidays per calendar year., • Birthing parents are eligible for 12-weeks of paid maternity/parental leave., • Non-birthing parents are eligible for 2-weeks of paid parental leave., • Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits., • Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages., • Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health., • Domestic and International space-available flight privileges for employees and eligible family members., • Career development programs to achieve your long-term career goals., • World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint., • Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies., • Recognition rewards and awards through the platform Unstoppable Together., • Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

At Henderson, we're about more than just buildings We're about the people, experiences, and longevity of a building. We're a company of problem-solvers and innovators known for our technical excellence and ability to provide come up with out-of-the-box solutions when it comes to design and construction. We love the process of bringing buildings to life - and keeping them in shape long after the doors open. As an ESOP, each of our employee-owners are an essential part of our mission to lead the industry in innovation, sustainability, and client experience. With a vision to build a better world, Team Henderson has a people-first culture and diverse portfolio of world-class facilities. It's What We Do We provide total building system design and construction services across multiple high-growth markets throughout the country for industry leaders. You'll get to use your talent to work on projects for some of the biggest names in mission-critical, higher education, sports, healthcare, grocery, restaurant, and retail within the sectors we serve in business, community, grocery, health, retail, and venue. It's How We're Different We're about more than just buildings. We're about you. You, and the hundreds of passionate employee-owners who make us who we are. We've always been committed to providing an inclusive workplace where people can bring their full self to work and helps people reach their full potential - both as professionals and individuals. Together, we provide dream up innovative solutions for our clients industry-wide problems, design and construct spaces that become landmarks, and toast the good life at our happy hours. Take a peek into what makes us different here: _ Position Summary: Fire Designer I: Responsible for designing basic building systems, preparing technical documents and performing engineering calculations in coordination with project teams. Fire Designer/Engineer II: Responsible for designing intermediate building systems, preparing design documents and performing engineering calculations in coordination with project teams. They are responsible for occasional task management and mentoring of less experienced designers. (Multiple Openings) Fire DI Key Responsibilities: • Performs calculations and designs basic engineering systems in collaboration with experienced design staff., • Prepares system layouts, detailed drawings and schematics., • Reviews shop drawings for conformance to plans and specifications., • Prepares or modifies reports, plans and designs for projects., • Acts as a mentor to less experienced designers., • Supports business development or pursuit activities., • Participates in client, company and/or industry events to build and maintain professional relationships., • Fosters a client-centric mindset and approach., • Communicates with clients as needed for the development and coordination of requirements and scope of work., • Supports answering questions from clients and architects., • Occasionally visits job sites to verify existing conditions and observe construction progress., • Identifies and seeks to fill gaps in industry and/or discipline knowledge on a continuous basis., • Maintains knowledge and understanding of common industry software, including Revit, Bluebeam Revu and Microsoft Office products., • Research and reviews new products, industry trends and evolving codes and standards. Fire DII / EII Key Responsibilities: • Performs calculations and designs basic to intermediate design systems with minimal supervision., • Prepares system layouts, detailed drawings and schematics., • Reviews shop drawings for conformance to plans and specifications., • Prepares or modifies reports, plans and designs for projects., • Performs research and makes recommendations as to the feasibility of systems or equipment., • Evaluates products for their application., • Provides technical guidance to others when appropriate., • Collaborates on business development or pursuit activities., • Participates in client, company and/or industry events to build and maintain professional relationships., • Fosters a client-centric mindset and approach., • Communicates with clients as needed for the development and coordination of requirements and scope of work. Maintains proactive communication throughout the project cycle., • Answers questions from clients and architects., • Visits job sites to verify existing conditions and observe construction progress., • Assists in resolving conflicts involving owners, architects and contractors as needed., • Identifies and seeks to fill gaps in industry and/or discipline knowledge on a continuous basis., • Maintains knowledge and understanding of industry software, including Revit, Bluebeam Revu and Microsoft Office Products. Acts as a resource for training or assisting others as needed., • Research and reviews new products, industry trends and evolving codes and standards., • Understands and applies Henderson's design guidelines, standards, policies and procedures., • Performs a limited range of project management responsibilities under the supervision of experienced managers. Asks questions when performing unfamiliar tasks., • May support or be responsible for project coordination activities such as managing emails, coordinating scope and schedule, attending client meetings, ensuring project quality, responding to client questions and coordinating project delivery. Fire DI Minimum Qualifications: • Bachelor's degree in relevant field of engineering (i.e.: mechanical, electrical, fire protection or architectural) and 1 year of relevant experience or 4 years of experience with high school diploma or equivalent is required., • Completion of the Fundamentals of Engineering (FE) exam preferred., • Additional certifications and accreditations aligned with the relevant technical field (e.g., BEMP, CPD, CDP, NICET, RCDD, etc.) preferred., • Basic proficiency in engineering design: basic knowledge of the A&E industry, codes, design guides and standards. Knowledge may be applicable to a limited range of practice, project or program types., • Proficiency with Revit and Bluebeam Revu preferred., • High technical aptitude: ability to learn, understand and utilize various systems and processes., • Effective verbal and written communication skills; ability to communicate with all levels in a clear and concise manner., • Effective critical thinking and problem-solving skills., • Team oriented and willingness and ability to function in a highly collaborative environment, in group projects and leading less experienced designers., • Ability to receive constructive feedback and adjust to coaching., • Proficiency with Microsoft Office suite and engineering design software applicable to your discipline or focus., • Must demonstrate proficiency in all core competencies as described and characterized in this job description. Fire DII / EII Minimum Qualifications: • Bachelor's degree in relevant field of engineering (ie: mechanical, electrical, fire protection or architectural) and 3 years of relevant experience or 6 years of experience with high school diploma or equivalent is required., • Completion of the Fundamentals of Engineering (FE) exam preferred., • Additional certifications and accreditations aligned with the relevant technical field (e.g., BEMP, CPD, CDP, NICET, RCDD, etc.) preferred., • Certifications and accreditations aligned with sustainability backgrounds (e.g., CDP, LEED, WELL, etc.) preferred., • Intermediate knowledge and proficiency in engineering design, A&E industry, codes, design guides and standards required. Knowledge applicable to a range of practices, project or program types preferred., • Intermediate proficiency in Revit and Bluebeam Revu required., • High technical aptitude: ability to learn, understand and utilize various systems and processes., • Effective verbal and written communication skills; ability to communicate with designers at all levels in a clear and concise manner., • Effective critical thinking and problem-solving skills., • Team oriented and willingness and ability to function in a highly collaborative environment, in group projects and leading less experienced designers. Ability to also work independently as needed., • Adapts to changing work environments, priorities and organizational needs., • Ability to prioritize and execute multiple tasks in a dynamic environment., • Ability to give and receive constructive feedback and adjust to coaching., • Proficiency with Microsoft Office suite and engineering design software applicable to your discipline or focus., • Must demonstrate proficiency in all core competencies as described and characterized in this job description. Let's Talk Perks We take care of our people. As a Henderson employee, you'll enjoy some pretty awesome perks. Trust us, your friends will all have work envy. Culture • Flexible Work Hours (Because we all need to balance work and life.), • Casual Dress Code (Be yourself, please.), • Paid Volunteer Time (We literally pay you to volunteer.), • Paid Parental Leave (Because we know both parents deserve to be there for a new child.), • Health and Wellness Initiatives (Get Fit and Stay Fit.), • Receptive and Forward-Thinking Leadership (Our doors are always open.), • Clear Career Path Options (We want you to excel.), • Benefits, • Industry-leading 401K match and profit sharing (When the company succeeds, we all share in that success.), • Employee Stock Ownership Plan (Yes, our employees are the owners.), • Paid Training for Professional Development (We'll pay for the time you take getting better at what you do.), • Performance Bonuses (When you do well, we reward you for your work.), • Comprehensive and Extensive Insurance (We've got you covered.), • Paid Term Life and Disability (We've got your family covered, too.), • Health Savings Account & Flexible Spending Accounts (We'll help you take advantage of tax savings.), • Paid Time Off and Sick Time off (Take a break. You deserve it!), • Financial Wellness & Coaching Program (Financial security makes you a happier team member.) More information can be found here - _. Henderson Engineers, Inc. and Henderson Building Solutions are EEO Employers/Vet/Disabled and participate in the E-Verify program. Applicants for positions with Henderson Engineers/Henderson Building Solutions must be legally authorized to work in the United States, and verification of eligibility will be required at the time of commencement of employment. All offers will be contingent upon completion of the hiring process including verifications and background checks as required for employment. To all recruitment agencies: Henderson does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Henderson without a prior written search agreement will be considered unsolicited and the property of Henderson. Please, no phone calls or emails. Pay Transparency: Individual salaries may be higher or lower than the stated range depending on factors unrelated to the applicant's race, color, religion, gender, sexual orientation, gender identity, national origin, ethnicity, age, or disability. Salary can vary from this range based on geographic cost of labor statistical differentials. CA: $76,096 - $132,240 CO: $72,160 - $125,400 NV: $68,880 - $119,700 NY: $80,032 - $139,080 DC: $76,096 - $132,240 NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Henderson representatives conduct all email communications exclusively through a company email address that ends with @, @. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Henderson will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. All legitimate job opportunities are posted on our company website's careers page.

Location: Paterson, NJ Field Service/Installation Technician at Benco Dental At Benco Dental, our company is our family, and we are looking for a new addition to assist us in Driving Dentistry Forward. Please review the description below carefully to ensure that this position is the perfect match for you! What's in it for YOU? Excellent Compensation Packages Medical, Dental and Vision Benefits Effective on Day 1 401k Package, Paid Time Off Program, and Profit Sharing Associate Discounts and Community Giveback Programs College Tuition Savings Program Caring Family Culture Toward all Associates Certified as a FORTUNE Great Place to Work Opportunities to Build a Better Benco through Diversity and Inclusion Resource Groups Family owned for 90+ years Position Summary: The Field Service/Installation Technician is a vital part of our company providing hands-on support to our customers. Service Technicians are independent team players who want to be customer focused. As the Service Technician, you will offer solutions to our clients that extend beyond repairs and maintenance to exemplify our number one goal: driving dentistry forward. Benco Dental offers service technicians career development and will provide a strong sense of accomplishment. Do YOU Possess These Skills and Attributes? Computer proficiency, including knowledge of Windows-based programs Organizational skills Problem solving skills Exceptional communication skills No Bio-Medical (dental) Device repair experience? No problem! Other relevant experience includes: Mechanical or Technical experience/education Electrical, Customer service, Military, or Software/hardware experience Pneumatics HVAC Do These Responsibilities Interest YOU? Providing maintenance and repair services out in the field Training staff on using equipment Training customers on using equipment Do YOU Meet These Requirements? High School Diploma or equivalent Valid driver's license and clean driving record (Required) Technical training in the bio-medical or electronics field (Preferred) Physical: Routine walking, bending, kneeling, and squatting, sitting, standing, reaching, and twisting Must frequently lift/lower/carry/push/pull 1 to 55 pounds, occasionally lift/lower/carry/push/pull 56 to 100 pounds Position requires routine pushing, pulling, grasping and manual dexterity in the use of hands, arms and shoulders Able to work in tight spaces Frequent travel to customer sites (daily) and occasional use of power tools The base pay range of $21.63-25.00/hour represents the low and high end of the hiring salary range for applicants that meet the minimum qualifications (tech in training). Actual salaries will vary and may be above or below the range based on factors including but not limited to location, experience, and performance. The hiring range listed is just one component of our total compensation package for employees. Other financial rewards may include bonuses, profit sharing, and Paid Time Off. Who We Are: It's our Mission to Drive Dentistry Forward Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930-a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states. We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. These services are supported by over 400 professionally trained sales representatives and 300 factory-trained service technicians who begin every task by asking "What does the customer want?" If you enjoy working for a progressive company, who is committed to diversity in our workforce, who values all customers and associates, who also provides the opportunity for growth and development- we encourage you to learn more about our Benco family. We are looking for driven professionals who want to play a key role in our future success, while making a positive impact within our industry. Thank you for your interest in Benco Dental. We look forward to hearing from you! We're proud to be an equal opportunity and affirmative action employer. At Benco Dental we celebrate our associates' differences to foster a culture of diversity and inclusion every day. Click here to learn more about how we promote Equal Opportunity and Diversity and Inclusion at Benco. *This position is a field-based / territory-based / virtually- based / remote-based position that does not require consistently reporting to a physical Benco location.