Trabajos pipe en Garden City, New YorkCrear alertas

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Installs, maintains, calibrates, troubleshoots, repairs, modifies, and overhauls and utilizes technical HVAC skills to ensure the efficient installation, operation and maintenance of the heating ventilation, air conditioning and refrigeration equipment throughout the treatment plant. Primary Duties/Responsibilities: • Install, repair, align and adjust controls for HVAC systems. Service and install components including, but not limited to, compressors, heat exchangers, evaporators, regulators, fans, pumps, tubing valves, ducts, electrical wiring, sensing devices, burners, blowers, electrodes, relays, solenoids, switches, thermostats, conduit, process heating systems and monitoring systems., • Troubleshoot and adjust manual and automatic controls for HVAC equipment. Shape, size and connect tubing using special bending, flaring and coupling tools, etc., • Observe and interpret temperature and pressure devices., • Utilizes specialized tools and equipment including, but not limited to, pyrometers, voltmeters, ammeters, voltmeters, fuel gas analyzers, hydrometers., • Utilize specifications such as: blueprints, sketches and/or descriptions of parts to be replaced, and plan sequence of operations., • Maintain manual and/or computerized work orders and records as directed., • Provide assistance and direction to less experienced HVAC Technician and/or assigned helpers., • May provide support for other skilled trades workers as assigned., • Responsible for general housekeeping of shop, job sites, work areas and other areas as assigned including, but not limited to, sweeping, dusting, mopping, and cleaning as necessary to maintain areas to Company standards., • Observe all on-the-job safety regulations. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Eight (8) years of experience as an electrician, electronics repair person, or HVAC technician., • Two years of related education at a college, trade school or equivalent may be substituted for experience. Knowledge/Skills/Abilities: • Ability to read and understand operating manuals and written instructions, complex wiring diagrams, schematics, blueprints and technical materials., • Knowledge of algebra, geometry and trigonometry and knowledge of treatment plant machines and proper procedures for electrical and HVAC maintenance and repair., • Ability to use electrical and other testing equipment to troubleshoot problems and make repairs., • Ability to use variety of tools including, but not limited to, hammers, wrenches, metal snips, electric drill, pipe cutter and bender, and acetylene torches., • Ability to communicate effectively with others, orally and in writing. Ability to follow oral and written instructions., • Ability to perform all of the following assignments: straight pulling, pulling hand over hand, reaching above the shoulder, pushing, walking, standing, crawling, kneeling, repeated bending and climbing., • Thorough knowledge of principles and theories of pressure, vacuum, vaporization, condensations, heat conduction, radiation and convection as such principles and theories apply to air, steam and water furnace, boilers, heat exchanger and pumps., • Knowledge of principles of refrigeration, mathematics, etc., to the degree such principles apply to refrigeration and the HVAC system., • Thorough knowledge of chemistry and physics, oxygen/nitrogen production characteristics, chemical properties and application of refrigerants, techniques of installation, plant operation, maintenance and automation or refrigeration, air conditioning equipment and heating and cooling systems., • Thorough knowledge of an/or experience of relevant electrical codes, principles and theories applicable to the installation and maintenance of electrical equipment including solid state electronic components and electrical/electronic circuits. Required Certification/Licenses/Training: • Completion of recognized Apprenticeship program. Additional Information Pay Rate: $44.38 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000/year*, • PAY THAT MOVES YOU - Earn 27% of linehaul + strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU - Strong pay, real perks, and respect on every mile At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for. And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus*, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider + pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1 year of verifiable CDL A OTR experience

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000 per year*, • PAY THAT MOVES YOU - Earn 27% of linehaul plus strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU - Strong pay, real perks, and respect on every mile At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing greater support, better pay, the utmost respect, and clean, comfortable trucks. Drivers agree. In a recent survey of flatbed drivers, nearly 90% said P&S pays better than other flatbed trucking companies and is a better place to work. If you want a driving job where you are valued, supported, and earning more, fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay. Your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight and support. Haul steady, well-planned freight, including steel coil, pipe, and building material loads, with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus*, • Medical, dental, vision, life, and short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider and pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1 year of verifiable CDL-A OTR experience

Job Description We are looking for a plumbing mechanic and a jr mechanic to join our team.. Mechanic must have at least 5 - 7 years experience and jr mechanic must have at least 3 -5 years experience . Must know how to install boilers , run gas pipe , new construction rough-ins waste/vent and water lines , finish work and all other phases of plumbing and heating. Must have a clean , valid drivers license. Own hand tools required. sick days , Paid holidays and 401 k plan available. Must be able to work independently , Immediate start

Job Description Interested in the opportunity for a great career as a utility locator. Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with a leader in the SUE industry. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. Responsibilities include, but are not limited to: • You will work with a team of professionals, including engineers, project managers, land surveyors, CAD and SUE technicians to produce high-quality deliverables that meet the guidelines established by the American Society of Civil Engineers, • Use geophysical equipment such as ground penetrating radar and multi-frequency pipe and cable locators to investigate and designate underground utilities, • Work with CAD software as part of your daily documentation process, • Operate vacuum excavation trucks to expose and document underground utilities, • Drive commercial motor vehicles (non-CDL), including vacuum excavation trucks, • Operate powered tools such as jackhammers, pneumatic tampers, concrete saws, and coring drills, • Complete paper and electronic documentation on a daily basis, • Perform daily basic maintenance on vehicles Qualifications: • High School Diploma/GED, • Prior utility related experience is a plus, but not a necessity, • Prior experience working on diesel engines is a plus, • Basic understanding of utility and construction plans is a plus, • Good reading comprehension and communication skills, • A good aptitude for using and understanding computer software, • Must be organized, • Enjoy working outdoors on a daily basis, • Able to walk several miles a day across varying terrain, • Ability to solve problems and think on your feet, • Should have an understanding of basic mechanical principles, • Must have valid driver's license with clean driving record, • Able to pass a pre-employment physical*, • Must be able to pass a DOT medical screening and obtain a DOT medical card, • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • OSHA safety certifications are a plus, • Able to travel across Colorado and other western states to support regional operations. Travel may account for 50 percent of work year and typically lasts for 2-week periods • Please Note that selected candidates will be required to pass a drug, background and reference screening

Job Description Interested in the opportunity for a great career as a utility locator. Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician II responsibilities include, but are not limited to: • Be skilled in the operation of SUE utility locating and designating equipment, including pipe and cable locators, Ground Penetrating Radar (GPR), and non-destructive vacuum excavation, • Complete detailed accurate daily reports, forms and field sketches, both electronically as well as draft by hand, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment, • Perform daily basic vehicle maintenance Tech II Qualifications: • High School Diploma/GED, • 4+ years of experience in the utility locating industry or as a SUE Field Tech, • Ability to read and interpret utility company prints and design plans, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Work nights and weekends when required to do so, • Must have a good oral and written communication skills and attention to detail, • OSHA Safety certifications are a plus We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks • Please Note that selected candidates will be required to pass a drug, background, and reference screening. T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, color, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineers employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team.

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking an experienced Pipefitter to join our team. In this role, you will build and maintain pipe systems in both residential and commercial settings. You will read blueprints, plan installations, and prepare pipes. The ideal candidate is analytical, with attention to detail and experience with pipes of a variety of materials. Responsibilities • Review and interpret blueprints to understand project requirements, • Inspect and prepare sites for construction operations, • Measure, cut, weld, assemble, lubricate, and install pipes, • Test system functionality, • Repair any leaks or malfunctions, • Use a variety of hand and power tools, • Work with other construction professionals to complete projects, • Follow all relevant safety guidelinesQualifications, • Previous experience as a Pipefitter is required, • Strong mathematical and problem-solving skills, • Attention to detail, • Knowledge of all relevant health and safety guidelines, • Excellent communication skills, • Ability to meet the physical demands of the position, including lifting heavy objects, • Ability to work overtime when required

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals. Key Responsibilities: Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionCivil Engineer PSEG is not offering visa sponsorship for this position. Job Summary:As the Civil Engineer, your responsibility is to perform engineering and design to ensure successful completion of Long Island Transmission & Distribution construction projects. Job Responsibilities: • Develop and evaluate the design of electric transmission systems and related facilities based upon reliability and economy, with consideration to operation, safety and maintenance requirements., • Develop material, engineering design, construction specifications/associated drawings, and standards as required for successful completion of assigned projects (Overhead, Underground Transmission or Civil/Structural)., • Develop, review and revise standards as a result of recommendations by industry associations and codes (e.g. IEEE, ASCE, AISC, ACI, ASME, EEI, ANSI, AEIC, EPRI and NESC) related to state of the art materials and engineering/operating methods., • Participate in Research & Development initiatives, evaluate and procure new materials/equipment to improve performance of the electric transmission system., • Work with internal and external organizations/customers to ensure prudent engineering solutions are undertaken to special engineering and construction projects., • Perform budget/project cost estimates, special engineering studies, investigations and calculations as required., • Contribute all details of time accounting to Work plan efforts, including expense and capital time, • Travel may be required to represent the department and company at industry meetings and vendor inspections., • Ability to respond to emergency storm and other conditions requires field work during nights and weekend. Job Specific Qualifications:Required: • BS Degree in Civil Engineering., • EIT Certificate and the ability to obtain Professional Licensure in NYS., • Two or more years of experience in structural analysis, reinforced concrete, structural steel and soil mechanics. Experience with marine structures is required., • Knowledge of AISC, ACI, ASCE, NESC, NYSDOT, NYS & local building codes., • Familiarity and experience in document management systems ( e.g.TeamCenter), 3D structural analysis and design software (i.e., Staad III) and AutoCAD., • Knowledge of ANSI, ASTM, National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation (latest codes). Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Experience with working with other engineering disciplines., • Experience with using Microsoft Office computer programs such as Word, Excel, Access and Outlook., • A valid US driver’s license with a safe and satisfactory driving record., • Compliance with the Department of Energy's regulation 10 CFR 810 is required.Desired:, • Knowledge of engineering design and analysis of underground electric transmission systems including 23-345 KV pipe type cable and solid dielectric cable systems., • Knowledge of AutoCAD and TeamCenter., • Knowledge of the National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation. Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Demonstrated verbal, written, interpersonal communication skills and computer skills. Some positions at PSEG require access to information covered by the Department of Energy’s regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: • A citizen or national of the USA; OR, • A lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR, • A citizen, national, or permanent resident of a “Generally Authorized” destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR, • A “Protected Individual” under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company. PSEGLI is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEGLI is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.

Hiring CDL-A Truck Drivers • ROLL HARD, EARN HARD, • Top company drivers make up to $90,000 per year*, • PAY THAT MOVES YOU, • Earn 27% of linehaul plus strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU, • Strong pay, real perks, and respect on every mile Why Drive for P&S? At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing greater support, better pay, the utmost respect, and clean, comfortable trucks.Drivers agree. In a recent survey of flatbed drivers, nearly 90% said P&S pays better than other flatbed trucking companies and is a better place to work. If you want a driving job where you are valued, supported, and earning more, fill out a quick form and talk to a recruiter today. Regional Flatbed Driver - Company Job • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay. Your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight and support. Haul steady, well-planned freight, including steel coil, pipe, and building material loads, with dependable miles and the support you need to stay productive on the road. Driver Benefits • $5,000 sign-on bonus*, • Medical, dental, vision, life, and short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider and pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details.There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements • Valid Class A CDL, • 1 year of verifiable CDL-A OTR experience

Be proficient at executing all store services, such as mixing paint, cutting glass, pipe, and keys.

Island Park, New York Retail We are looking for friendly, customer oriented, and enthusiastic people to join the Ace Hardware team! As a company, we are dedicated to delivering an amazing shopping experience to every customer, every time! Key Holders are responsible for opening and closing a store and performs other administrative duties in a retail setting. Their main duties include assisting customers when needed, making sure the store is organized, neat and tidy and ensuring the alarm system is working properly. • Ensure company/store policies and procedures are communicated in a timely manner and adhered to accordingly, • Partnering with store management, coach all store staff on inventory management best practices as they apply to each person's job duties, • Partnering with store management help to train employees to maintain and update plan-o-grams throughout the store, • Execute the daily operational, day-to-day goals and priorities assigned by store management, • Assist in the training and development of peers, • Open and close registers, • Responsible for counting money and making bank deposits while manager on duty, • Protect company assets by following all loss prevention procedures; train staff on same, • Maintain an open and positive relationship with store management team, • Address all safety concerns immediately, • Report all incidents and accidents immediately and complete online report form, • Update store management team about the progress of the store and staff on a regular basis, • Actively participate in daily huddle meetings, • Ensure all receiving is completed in compliance with company procedures to maintain an accurate inventory, • Review daily, W.E.A.D. (Walk Every Aisle Daily), appearance of in-store and window displays and end caps and oversee necessary changes to improve overall presentation, • Monitor all store transfers and expedite all outstanding transfers, • Responsible for opening and closing the store and securing all store assets, • Process damaged and defective goods in a timely and accurate manner, • Be a positive, consistent, and respectful role model; communicate positively regarding store management and company strategies; develop and support a positive attitude toward Costello's Ace Hardware, • Use the E.C.E.T. (Every Customer, Every Time) process with EVERY customer interaction, • Be "customer ready" whenever you are on the stage/sales floor, • Recommend related items when appropriate and executes S.A.L.E.S. process, • Maintain awareness of all promotions and advertisements, • Uphold merchandising and store cleanliness standards, • Participate in the processing of new shipments and help the team to keep the receiving and back stock area clean and organized, • Know the proper way to answer the telephone, • Be alert for possible merchandise losses. Protect all company assets and report any missing or damaged merchandise to your supervisor, • Advise store management of any pricing errors, • Be proficient at executing all store services, such as mixing paint, cutting glass, pipe, screen repair, and keys, • Ensure all shipments are packed out in its proper home and all overstock is away, • Follow and enforce all policies in the company handbook, • Complete other duties as assigned Retail Sales experience 1 year (Preferred) Retail Math experience 1 year (Preferred) Leadership experience 1 year (Preferred) Bi-lingual (Preferred) Essential Physical Ability: Frequency - Requirement Walking: Frequent - Flat surfaces from point to point Standing: Constant - All work performed on feet Sitting: None Stooping: Frequent - To pick up cartons at floor level Reaching: Frequent - To a height of 6 feet Lifting: Frequent - Up to 60 lbs., up to 500 repetitions per hour to a height of 4 feet (top of register); must be able to lift up to 25 pounds comfortably Hand Dexterity: Frequent - Must be able to use at least one hand to operate register and complete paperwork. Pushing/Pulling: Frequent - Move hand jacks from place to place Carrying: Frequent - Up to 50 lbs., up to 10 feet, occasionally more Climbing: In-frequent - Stairs in storage rooms. ladders Vision: Constant - Read labels, recognize boxes, safety in working Hearing: Constant - Safety signals

BHC North Massapequa - N Massapequa, NY 11758 Salary Range $17.00 - $20.00 Hourly Position Summary As a Key Holder, your focus is on the customer while maintaining inventory and operating efficiencies to ensure all customers are receiving high levels of customer service. This position is in preparation for an assistant manager position and will require managing the store independently when scheduled as the manager on duty. The Key Holder position provides leadership for the staff by maintaining the highest level of store standards. In addition to responsibilities as a Sales Associate, the Key Holder position takes an active role in training staff, overseeing store openings and closings, and protecting the store assets by maintaining operational policies and procedures. • Use the E.C.E.T. (Every Customer, Every Time) process with EVERY customer interaction, • Be customer ready whenever you are on the stage/sales floor, • Recommend related items when appropriate and executes S.A.L.E.S. process, • Maintain awareness of all promotions and advertisements, • Execute the daily operational, day-to-day goals and priorities assigned by store management, • Assist in the training and development of peers, • Actively participate in daily huddle meetings, • Uphold merchandising and store cleanliness standards, • Participate in the processing of new shipments and help the team to keep the receiving and back stock area clean and organized, • Greet every customer you make eye contact with, anywhere in the store, • Know the proper way to answer the telephone, • Be alert for possible merchandise losses. Protect all company assets and report any missing or damaged merchandise to your supervisor, • Advise store management of any pricing errors, • Be proficient at executing all store services, such as mixing paint, cutting glass, pipe, and keys, • Ensure all shipments are packed out in its proper home and all overstock is away, • Partnering with store management, coach all store staff on inventory management best practices as they apply to each persons job duties, • Partnering with store management help to train visual merchandiser(s) to maintain and update plan-o-grams throughout the store, • Review daily, W.E.A.D. (Walk Every Aisle Daily), appearance of in-store and window displays and end caps and oversee necessary changes to improve overall presentation, • Monitor all store transfers and expedite all outstanding transfers, • Responsible for opening and closing the store and securing all store assets, • Process damaged and defective goods in a timely and accurate manner, • Protect company assets by following all loss prevention procedures; train staff on same, • Maintain an open and positive relationship with store management team, • Address all safety concerns immediately, • Update store management team about the progress of the store and staff on a regular basis, • Be a positive, consistent, and respectful role model; communicate positively regarding store management and company strategies; develop and support a positive attitude toward Costellos Ace Hardware, • Ensure company/store policies and procedures are communicated in a timely manner and adhered to accordingly Essential Physical Ability - Frequency - Requirement Walking - Frequent - Flat surfaces from point to point Standing - Constant - All work performed on feet Sitting - None Stooping - Frequent - To pick up cartons at floor level Reaching - Frequent - To a height of 6 feet Lifting - Frequent - Up to 60 lbs., up to 500 repetitions per hour to a height of 4 feet (top of register); must be able to lift up to 25 pounds comfortably Hand Dexterity - Frequent - Must be able to use at least one hand to operate register and complete paperwork Pushing/Pulling - Frequent - Move hand jacks from place to place Carrying - Frequent - Up to 50 lbs., up to 10 feet, occasionally more Climbing - In-frequent - Stairs in storage rooms; ladders Vision - Constant - Read labels, recognize boxes, safety in working Hearing - Constant - Safety Signals Other Requirements: • Strong leadership skills, • Ability to work in a fast-paced, demanding environment, • Excellent organization skills, • Strong written and verbal skills, • Must have reliable transportation, • Must be willing to work in a team, as well as independently, • Sense of urgency and follow through are essential, • Prior work experience in a retail environment and prior management experience. Costello's offers competitive wages and benefits, including: • Major Medical, Dental, Vision Insurance, Short Term Disability & Prescription Coverage for Eligible Employees, • Flexible Spending Account "FSA", • Dependent Care FSA, • Generous Vacation Time, • Personal Time, • 6 Paid Holidays, • 401(k) Plan, • Company Contribution to Retirement Savings Plan, • Generous employee discount programs. Bellmore Home Center, Inc. d/b/a Costello's Ace Hardware is an Equal opportunity Employer.

Job Description Job Title: Mechanical Coordinator Location: Jamaica, NY Type: 6 month Contract Per diem Mob/demob Responsibilities • Oversee mechanical contractor to make sure that they are doing the work as per specified drawings, • Handle all mechanical LOTO requests as needed for both the mechanical contractor as well as the plant, • Maintain mechanical daily reports, • Coordinate mechanical contractor equipment deliveries, boom truck, cranes, pipe/valve deliveries etc., • Oversee mechanical trades onsite regarding all safety standards, • Monitor all mechanical installations to ensure quality and safety standards are met, • Track mechanical documentation such as blow down reports, weld x-rays etc., • Act as the liaison between plant operations and the mechanical contractors and sub-contractors, • Keep plant management informed of all mechanical concerns, issues, and happenings Requirements • OSHA 30 SST Supervisor, • Minimum high school diploma, GED, etc., • General computer knowledge for daily report completion, • Can do/Proactive attitude towards situations and issues System One, and its subsidiaries including Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #193-Precision Oakridge

Top Local Construction Management Firm with Exceptional Backlog of Projects! This Jobot Job is hosted by: Logan Ridge Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $150,000 - $200,000 per year A bit about us: We are a top ranked General Contrac

Maintenance Technician - Bottled Beverages - Hempstead Village, NY Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _.Se

Job Title: Facilities Maintenance Technician.Job Type: Temporary Assignment.TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide.Our client provides services to the travel industry, including caterin

Field Service Mechanic - CNC Machining Centers - Hempstead, NY Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders _.Immediate opening available for experienc

The Maintenance Mechanic Supervisor is responsible for overseeing the maintenance and repair of plant packaging machinery, conveyor equipment, and related systems, including the construction and installation of new systems as assigned.This role supports operations by installing, maintaining, trouble

The ITOCC Lead Technician oversees 24/7 Integrated Technical Operations Command Center (ITOCC) operations supporting maintenance planning, emergency response coordination, Fire/Life Safety systems, and facility operations at JFK Airport - Terminal One.This position serves as the operational lead for

Construction Superintendent - General Contractor.The Construction Superintendent will be responsible for managing all on-site construction activities, ensuring projects are completed safely, on schedule, and to the highest quality standards.This individual will serve as the primary field leader, coo

PrideStaff - - Responsibilities: Operate forklift safely and efficiently; Load, unload, move, and stage materials; Assist with shipping and receiving tasks; Pick, pack, and prepare orders; Maintain inventory organization and general warehouse cleanliness.

ProLogistix - - Responsibilities: Pull routes using manifest; Stage freight and assist loading/unloading; Handle picking/packing/scanning/kitting/counting; Identify OS&D and annotate variances; Ensure timeliness and accuracy of packaging and systems.

Responsibilities: Operate seated and standing forklift to transfer product between warehouse floor and trucks; Unload, stock, and replenish merchandise per replenishment reports; Open/close bay doors and prepare dock plate; move and palletize items; Verify merchandise accuracy and quality; enter dat

Aerotek - - Responsibilities: Assemble electronic subassemblies according to specifications; Perform inspections and testing of assemblies; Troubleshoot with engineering/production teams; Maintain clean, safe work area; Document assembly processes and test results.

The Maintenance Mechanic Supervisor is responsible for overseeing the maintenance and repair of plant packaging machinery, conveyor equipment, and related systems, including the construction and installation of new systems as assigned.This role supports operations by installing, maintaining, trouble

Nesco Resource - - Responsibilities: Assemble composite and electrometric materials with fixtures; Follow blueprints and instructions; Inspect finished products for quality; Maintain clean work area; Mix adhesive RTV and sealing compounds.

Construction Superintendent - General Contractor.The Construction Superintendent will be responsible for managing all on-site construction activities, ensuring projects are completed safely, on schedule, and to the highest quality standards.This individual will serve as the primary field leader, coo

The ITOCC Lead Technician oversees 24/7 Integrated Technical Operations Command Center (ITOCC) operations supporting maintenance planning, emergency response coordination, Fire/Life Safety systems, and facility operations at JFK Airport - Terminal One.If you think you are the right match for the fol

Nesco Resource - - Responsibilities: Assemble electronic/electrical subassemblies per specs; Perform inspections and testing for quality; Collaborate with engineering/production to troubleshoot; Maintain clean, safe work area; Document assembly processes and test results.

PrideStaff - - Responsibilities: Perform precise hand soldering on printed circuit board (PCB) assemblies following technical diagrams and schematics; Assemble electrical components, wire harnesses, and sub-assemblies; Identify basic electronic components (resistors, capacitors, diodes, etc.Conduct

Deep pipeline of supermarket, retail, restaurant, and commercial projects.

Goodwin Recruiting - - Responsibilities: Assemble electronic products and wiring according to drawings and schematics; Perform soldering of surface-mount components; Inspect and handle components with dexterity; Work under a microscope to precision standards; Follow standard manufacturing tools and

Nesco Resource - - Responsibilities: Assemble electronic components and circuit boards per schematics; Solder and connect wires, terminals, and connectors; Perform inspections and functional tests on assembled units; Operate hand tools, power tools, and automated assembly equipment; Document work co

Nesco Resource - - Responsibilities: Lead aerospace assemblies in accordance with IPC-610 standards for quality.

The ITOCC Lead Technician oversees 24/7 Integrated Technical Operations Command Center (ITOCC) operations supporting maintenance planning, emergency response coordination, Fire/Life Safety systems, and facility operations at JFK Airport - Terminal One.If you think you are the right match for the fol

The Maintenance Mechanic Supervisor is responsible for overseeing the maintenance and repair of plant packaging machinery, conveyor equipment, and related systems, including the construction and installation of new systems as assigned.This role supports operations by installing, maintaining, trouble

PrideStaff - - Responsibilities: Machine setup and operation of production equipment; Parts inspection using calipers/micrometers; Monitor machinery and report malfunctions; Maintain daily production logs and quality sheets; Adhere to safety PPE and housekeeping standards.

Nesco Resource - - Responsibilities: Assemble components using mechanical tools; Read and interpret drawings and blueprints; Follow established assembly procedures; Maintain quality and safety standards; Meet productivity targets.

Construction Superintendent - General Contractor.The Construction Superintendent will be responsible for managing all on-site construction activities, ensuring projects are completed safely, on schedule, and to the highest quality standards.This individual will serve as the primary field leader, coo

Looking for a Master Plumber Qualifier.Must hold a master's plumbing license and be qualified to work in Valley Stream, Elmont, Franklin Square, Floral Park, Great Neck, and other neighboring cities.Willing to pay for testing for additional licenses.Will be compensated on a monthly basis, the amount

Superintendent shall be responsible for overall maintenance, repairs and upkeep of agency locations.Utilizing sound judgement, critical thinking and communications skills, the Superintendent shall process work orders, tasks and projects efficiently, delivering on schedule.The Superintendent shall re

Were not just fixing pipeswere building relationships and making sure our customers feel taken care of from start to finish.

Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider.Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately

Join a mission-driven team at Mercy Hospital, a 375-bed not-for-profit hospital known for compassionate care that treats the whole person: body, mind, and spirit.We're looking for a skilled plumber to help maintain the safe and efficient operation of our hospital's plumbing, piping, water, drainage,