Trabajos pipe en Orange, New JerseyCrear alertas

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Operates and maintains the water distribution system. Supports the installation, inspection, maintenance, repair, and replacement of water mains, service connections, hydrants, valves, meters, and related distribution components. Responds to customer service requests, performs water meter readings and changes, and provides occasional support to Veolia operations and other locations as needed. Primary Duties/Responsibilities: • Assist with the installation, replacement, repair, and maintenance of water mains, service connections, fire hydrants, valves, meters, and related appurtenances., • Operate, monitor, and maintain water distribution facilities, systems, and related equipment., • Perform leak inspections on water mains and service connections and assist with leak detection, investigation, and repair activities., • Conduct utility mark-outs in accordance with applicable procedures and regulatory requirements., • Respond promptly and professionally to alarms, emergency call-outs, customer complaints, and service requests, including meter readings, meter changes, high-bill investigations, low-pressure concerns, discolored water, and other distribution-related issues., • Collect water samples for process-control and regulatory compliance monitoring in accordance with established procedures., • Perform routine preventive maintenance, inspections, troubleshooting, repairs, and housekeeping for facilities, vehicles, tools, and equipment., • Maintain the cleanliness, appearance, security, and general condition of facilities and company vehicles under Veolia’s responsibility., • Properly operate, clean, inspect, and maintain utility tools, vehicles, and equipment, including tapping machines, portable ditch pumps, generators, pipe- and leak-detection equipment, jackhammers, backhoes, and related equipment., • Assist with excavation, trenching, shoring, backfilling, compaction, pipe installation, hydrant work, valve operations, and restoration activities, as required., • Assist with water main shutdowns, isolations, flushing, pressure checks, disinfection, and returning repaired or newly installed facilities to service., • Perform hydrant inspections, flushing, repairs, and maintenance, including documenting deficiencies and reporting conditions requiring follow-up., • Assist with meter installation, testing, maintenance, replacement, and related service-line work., • Read, record, and maintain accurate meter, inspection, maintenance, sampling, repair, and service documentation., • Complete work orders, service reports, inspection forms, equipment logs, and other required records accurately and in a timely manner., • Identify and report abnormal operating conditions, damaged infrastructure, safety hazards, equipment problems, leaks, and other conditions requiring corrective action., • Maintain an appropriate inventory of tools, materials, parts, and supplies; report shortages and assist with loading, unloading, and securing materials., • Coordinate with supervisors, contractors, customers, public agencies, and other personnel as necessary to complete assigned work safely and efficiently., • Follow applicable traffic-control, excavation, confined-space, lockout/tagout, personal protective equipment, and other safe-work requirements., • Participate in emergency standby and scheduled on-call rotations as directed by management., • Comply with all company safety policies, procedures, programs, environmental standards, and applicable regulatory requirements., • Provide backup support to other New Jersey projects as needed., • Perform special projects and other related duties as assigned by management. Work Environment: • Work is performed in operational environments, both indoors and outdoors, with exposure to noise, machinery, varying temperatures, inclement weather, and other adverse conditions for extended periods., • May occasionally be required to enter and work in confined spaces.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • 3+ years of experience with water distribution operations, sampling and valve operation required. Knowledge/Skills/Abilities: • Ability to read, write, communicate effectively in English, and perform basic mathematics, measurements, and unit conversions., • Ability to read, interpret, and accurately record information from meters, gauges, control panels, computer systems, work orders, and technical documents., • Mechanical aptitude and ability to operate, inspect, troubleshoot, and maintain water distribution equipment and tools while recognizing abnormal conditions and safety hazards., • Ability to follow procedures, complete required documentation, use basic computer systems, respond to emergencies, and work effectively with others. Required Certification/Licenses/Training: • NJ License Class W1 preferred., • Valid New Jersey driver’s license required, CDL Class B preferred. Physical Requirements: • Ability to stand and walk for extended periods, including walking up to approximately five miles per shift; frequent use of hands for handling, grasping, and fine motor tasks., • Ability to climb stairs and ladders; work on catwalks, platforms, and elevated structures up to 50 feet; and work in various positions, including standing, bending, stooping, kneeling, squatting, and reaching overhead or in front of the body., • Ability to use hand tools weighing up to 15 pounds with arms extended for periods of up to 40 minutes., • Ability to lift and carry up to 50 pounds regularly and occasionally up to 60 pounds for distances of approximately 10 feet., • Requires close visual and auditory attention to identify equipment malfunctions, abnormal conditions, and safety hazards. Additional Information Pay Range: $25.00 to $28.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – 15 days Eligible for up to 3% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description General Description: Troubleshoot and repair electrical machinery using VOM and schematics, Wire electrical enclosures, motors, PLC terminals, and electrical devices using a VOM and schematic. Perform basic PLC program and troubleshooting. Reports to: Production Manager / Maintenance Eng. Responsibilities: • Maintain the electrical in the building and presses., • Read and understand electrical schematics and blueprints, • Wiring equipment, • Supervisor the Maintenance team Minimum Educational Qualifications (If Applicable): • High School diploma Minimum Previous Experience (If Applicable): • Experience in A/C 120/208/470 Volts, • Experience with EMT tube bend and rigid pipe, • Electrical experience, • PLC experience, • Wiring and troubleshooting electric circuit per schematic Minimum Additional Training (If Applicable): • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Good verbal and written communication skills, • Relevant technical knowledge, • Problem-solving skills, • Efficiency and organization, • Teamworking skills, • Preferred Spanish

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: • Maintain the electrical in the building and facility equipment., • Read and understand electrical schematics and blueprints, • Troubleshoot and wiring equipment, • Supervisor the Maintenance team Previous Experience: • Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe, • Preferred Experience: Wiring electrical enclosures as per schematic given, • Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: • Required: High School diploma, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications Company training will include • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Teamwork and problem-solving skills, • Good verbal and written communication skills, • Efficiency and organization, • Able to speak Spanish helpful

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development Please do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced Commercial HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. VRV/VRF a PLUS! You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Extensive work with commercial HVAC systems, including chillers, rooftop units, and mechanical systems, • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems, • Use common tools of the HVAC trade in daily work (e.g. multimeter, refrigerant gauges, charging charts, hand tools etc.), • Ability to install, service, and repair water source heat pump systems, • Establish customer rapport to ensure the highest levels of satisfaction, • Ability to layout, fabricate, assemble, install, and maintain refrigerant piping systems, pipe supports, and fixtures in commercial and industrial settings, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • 5-10 years experience as an HVAC service technician, • Valid Drivers License and clean driving record, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 50 pounds

Job DescriptionBenefits: • 401(k), • Health insurance, • Bonus based on performance, • Free uniforms Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary We are looking for a skilled and experienced Plumber to join our team! In this role, you will perform diagnostics, service, and installation of plumbing in residential and light commercial environments. You are a Plumber with a commitment to quality in all the work you do. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, pro press, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses Qualifications, • Minimum 5 years of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment

Job Description POSITION TITLE : Plumber REPORTS TO: Director of Facilitied DEPARTMENT: Operations Plant FLSA STATUS: Non-Exempt Job Specific Competencies: Under limited supervision installs, repairs or modifies, maintaims plumbing/steam fitting, piping, plumbing fixtures, mschinery that uses water, gas,air, oxygen,vacuum, steam, steam condensation sewage, drainage systems etc and associated HVAC equipment and medical systems including autoclaves and sterlizers throughout the building, Follows priority assigned by supervisor. Typical Task Perform: include but not limited to tests, checks, repairs, installs, rebuilds, lubricates, cleans such things as fire protection, sprinkler lines, valves, fixtures, faucets, autoclaves, sterilizers, washing machines, air compressors, valves, dryers, piping, boilers, etc. Uses a variety of hand and other tools including power drain cleaners, electrical drills, saws, soldering iron, pipe threading machines, etc. Assists in special and routine inspections of facilities, new construction projects, recognizes equipment malfunction,risks and identifies deficiences and source of problem and refers to the Directors of Facilities/Operations and caries out approved repairs as above. Maintains and implement standard practices, and applicable codes and regulations in the execution of assigned tasks and reports any deviation from standards to attention of the Directors of Facilites/Operations. Plans installations by studying blueprints and work sketches to determine the kind and size of pipe, fittings, materials, etc. that are required. Modifies drawings as changes are made to reflect As Built conditions. Perform field lay outs and measurements, fabricates, assembles, installs, and repairs on plumbing and piping repairs and installations. Perform the necessary preventive maintenance as per the Preventive Maintenance Program in compliance with regulatory requirements. Respond to requests for service and emergemcy calls Perform regular daily/weekly rounds testing, and checking for proper operation of plumbing systems and water temperture . Assist in the removal of snow from the exterior of the building. Possess a valid driver's license, and is able to operate an automobile. ExpectationsIs knowledgeable of and adheres to all hospital policies regulatory and OSHA safety requirements and procedures including but not limited to: Attendance Management: Reports to work on time; is flexible when staffing needs warrant change; requests time off in a timely manner; consistently utilizes time clocks to document in and out shifts. Rules of Conduct: Respects the rights and property of others; does not engage in Harassment or Violence in the Workplace. HIPPA: Maintans confidentiality of patients, staff and visitors at all times. Dress Code: Complies with dress code policy and wears ID at all times. Successfully completed previous years goals or performance improvement plan. Performs other duties as assigned. Customer Service Excellence Always introduces self to customers, patients and visitors professionally and coureously. Directs patients and visitors that appear to be lost; contributes positively to morale and demonstrates service excellence by being respectful, empathetic, helpful and attentive; response promptly to inquiries. Always treats all customers, co-workers with respect and professionalism per HR Rules of Conduct policy. Professional Development/Competency/Regulatory Compliance Is 100% compliant with 90 day and annual performance reviews of staff by due date. Participates in Performance Improvement (PI) projects as set forth by manager. Maintains current and valid credentials/license with relevant governing body and/or stays knowledgeable of all changes in federal, state, local and regulatory body laws, rules and regulations. Is compliant with HIPPA rules and regulations and current patient safety standards. Working Conditions: An employee may be exposed to a variety of activities and conditions that place him/her at risk to exposure to certain diseases and circumstances Able to handle emergency or crisis situations May be exposed to blood borne pathogens and bodily fluids May be exposed to a variety of electro-mechanical hazards and radiation May be required to wear protective equipment as necessary May be exposed to hazards of flammable, and/or explosive gases May be exposed to outside elements (accidents, injuries, illness, death) May be exposed to varying and unpredictable situations May be occasionally subject to irregular hours May be exposed to stress due to multiple tasks & demands for time Able to walk, stand, sit, lift, push, pull, carry, stoop, kneel + climb without restriction May be exposed to extreme weather changes - hot, cold, wet. May be exposed to dust, vapors, fumes VISUAL AND HEARING REQUIREMENTS Yes Must be able to see with corrective eye wear Yes Must be able to hear clearly with assistance I have reviewed these job requirements and verify that I can perform the minimum requirements and essential functions of this position. Legal Disclaimer: This is not a contract of employment and job duties and responsibilities may change and additional job duties may be requested.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber to join our team. The Plumber will support the Plumbing department by performing Plumbing work and assist the forman on daily tasks and projects. Essential Functions • Install commercial and multi-unit residential plumbing systems with precision and expertise., • Implement commercial and multi-unit residential hydronic heating systems efficiently., • Test pipe systems and fixtures for leaks to ensure system integrity., • Interpret blueprints and project layouts effectively for accurate installations., • Identify and utilize necessary tools and special equipment for each job., • Complete required paperwork accurately and promptly within deadlines., • Maintain company-issued vehicle, tools, and equipment to ensure optimal performance., • Uphold company core values of integrity, excellence, teamwork, and innovation consistently., • Travel between job sites and the main office as needed., • Perform additional related duties as assigned by management.Education, Qualities & Skills required, • Five years of plumbing experience., • OSHA 10 Certification, • Strong organizational and multitasking skills., • Effective communication and active listening abilities., • Sound judgment and critical thinking., • Consistently professional behavior and conduct. Compensation Starts at $25 Hourly Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR fO4kJ0UKQV

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000/year*, • PAY THAT MOVES YOU - Earn 27% of linehaul + strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU - Strong pay, real perks, and respect on every mile At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for. And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus*, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider + pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1 year of verifiable CDL A OTR experience

Job Description At Zoom Drain, we don't just offer jobs-we build careers. Our experienced drain technicians enjoy competitive pay plus benefits while developing skills that ensure long-term professional growth. DRAIN TECHNICIANS WANTED - EXPERIENCED PROFESSIONALS APPLY NOW! WHY TOP TECHNICIANS CHOOSE ZOOM: • State-of-the-art equipment and service trucks, • Clear advancement path with ongoing training, • Supportive team environment where your expertise is valued, • Competitive benefits package that rewards your skills WE'RE LOOKING FOR TECHNICIANS WHO: • Have 2+ years experience with electric snakes, water jets, and sewer cameras, • Are ready to grow their skills (trenchless pipe replacement experience a plus!), • Bring reliability, motivation, and problem-solving excellence, • Have a valid driver's license in good standing COMPREHENSIVE REWARDS PACKAGE: • Competitive pay with regular bonus opportunities, • Full medical, dental, retirement, and insurance benefits, • Paid time off and holidays, • Company-provided technology and uniforms, • Recognition program for outstanding performance Don't just find another job-build your future with a company that invests in you! *Each location is independently owned and operated

Job Description Commercial Plumber GPH Boiler & Mechanical Services New Jersey $25.00–$40.00 per Hour | Full-Time Join a Company That Invests in Your Future GPH Boiler & Mechanical Services has been serving New Jersey for more than 30 years, providing commercial plumbing, mechanical, heating, and HVAC services to apartment communities, senior living facilities, hotels, restaurants, municipalities, and commercial properties. We're looking for an experienced Commercial Plumber who takes pride in quality workmanship, enjoys solving problems, and wants to build a long-term career with a stable, growing company. If you're dependable, customer-focused, and ready to work with a professional team, we'd love to hear from you. What You'll Do • Install, repair, and maintain commercial plumbing systems, • Perform plumbing repairs, replacements, and preventative maintenance, • Install and repair domestic water, sanitary, storm, and gas piping systems, • Perform commercial pipe fitting and equipment installations, • Diagnose and repair plumbing issues efficiently, • Perform drain cleaning and sewer line maintenance, • Read blueprints, specifications, and construction drawings when required, • Ensure all work complies with New Jersey plumbing codes and safety regulations, • Communicate professionally with customers, property managers, and team members, • Maintain a clean, organized, and safe work environment Qualifications • Minimum 4 years of commercial plumbing experience preferred, • Experience with commercial plumbing repair and installation, • Pipe fitting experience preferred, • Strong troubleshooting and problem-solving skills, • Valid New Jersey Driver's License, • Ability to lift 50+ pounds and perform physically demanding work, • Must provide your own basic hand tools, • Strong communication and customer service skills, • Reliable, dependable, and safety-minded Compensation • $25.00–$40.00 per hour, based on experience, • Overtime available, • Annual performance reviews with opportunities for advancement, • Year-end bonus opportunities Benefits • Medical Insurance, • Dental Insurance, • Life Insurance, • 401(k) with Company Match, • Paid Vacation, • Paid Holidays, • Paid Personal Time Off, • Tuition Reimbursement, • Employee Discount Program, • Company Uniforms, • Well-stocked service vehicles with power tools and materials provided, • Stable, year-round employment, • Positive team-oriented work environment Schedule • Full-Time, • Monday through Friday, • 8-hour shifts, • Overtime opportunities, • Rotating on-call schedule Why Join GPH? At GPH Boiler & Mechanical Services, you'll join an established company with over three decades of success serving commercial customers throughout New Jersey. We invest in our employees by providing quality equipment, excellent benefits, opportunities for advancement, and a supportive team environment where your skills are valued.

Job DescriptionDescription: The Maintenance Technician is responsible for the day-to-day maintenance, repair, and overall physical care of apartment buildings/complexes. This hands on role supports the Building Superintendent and property management team to ensure a well maintained, safe, and high quality living environment for all residents. The ideal candidate is a reliable professional with strong technical skills, a customer service mindset, and residential or multi-unit properties. Key Responsibilities General Maintenance & Repairs Complete daily service work orders with professionalism and attention to detail. • Prepare market ready apartments, including cleaning, repairs, painting, and installations., • Perform electrical repairs such as lighting fixtures, switches, outlets, appliances, and related equipment., • Conduct plumbing repairs including clearing stoppages, repairing leaks, replacing fittings and valves, and basic pipe work., • Perform carpentry tasks including fitting doors, installing molding, floor repairs, framing, sanding, and refinishing., • Complete sheetrock repair, spackling, priming, and painting as needed., • Assist with flooring repairs or replacements. Building Operations & Property Care • Maintain all common areas, including lobbies, hallways, laundry rooms, elevators, and amenity spaces in accordance with company standards., • Conduct routine cleaning and custodial tasks for resident turnover., • Maintain building grounds, walkways, and exterior areas., • Perform repairs involving concrete, roofing, masonry, and fencing as necessary., • Participate in all ongoing building improvement and capital projects., • Support HVAC controls and ensure familiarity with building mechanical systems. Emergency Response & On Call Rotation • Participate in the on call rotation for nights, weekends, and holidays., • Respond promptly to emergency requests including floods, power outages, leaks, and safety risks., • Demonstrate full knowledge of emergency building shutoffs (water, electrical, gas). Inspections & Compliance • Conduct annual and periodic apartment inspections., • Identify safety hazards and report or resolve issues promptly., • Assist with compliance efforts and preventative maintenance schedules. Resident & Team Communication • Professionally interact with residents, providing high quality service and clear communication., • Deliver notices to residents and support the Property Manager with building updates., • Work collaboratively with the maintenance and management team to ensure exceptional property operations. Seasonal Duties • Participate in snow and ice removal efforts, including shoveling, salting, and maintaining walkways., • Assist with seasonal building preparation tasks (HVAC, landscaping, winterization, etc.). Requirements: Qualifications • High School Diploma or GED required., • Minimum of 1 year of maintenance experience, preferably in apartment communities or related residential environments., • Valid driver’s license; reliable transportation to assigned property., • Personal set of basic tools required., • Strong communication and customer service skills., • Ability to work independently and as part of a team. Physical Requirements • Ability to lift 70–75 lbs. unassisted., • Ability to climb ladders and access rooftops (25–30 ft)., • Ability to work in confined spaces or crouched positions for extended periods., • Comfortable working overhead with power tools, hand tools, and painting equipment., • Ability to shovel snow or perform outdoor work for extended periods. Wages: $23 - $24 per hour Benefits: Medical, Dental, Vision; 401k, Paid Time Off, Paid Holidays, Life Insurance

Job Description Pay Rate: $34.53/hr + 12% shift differential Basic Function (Purpose of Position): To perform the routine repairs and installation of equipment in a timely manner to ensure minimal disruption to site operations. Essential Responsibilities and Specific Duties: • Holds at least one of the skills outlined (welding, pipe fitting, basic millwright, electrical and instrumentation)., • SAP Data entry as required for compliance and production purposes., • Trains in operation of all plant equipment as required for type of process in operation, including extraction, distillation, liquid compounding, washed extraction, and emulsions., • Interprets electrical schematics, piping and instrumentation diagrams (P&ID), and process flow diagrams (PFD)., • Maintains spare parts inventory, reporting deficiencies for restock and reorder., • Maintains a neat, orderly and clean workplace at all times., • Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) regulations and adheres to internal policies., • Performs other duties as required. Hourly Job Description – Job Specifications Minimum Education/Experience/Skills/Job Knowledge/: High School diploma or equivalent with 3-4 years previous general mechanical experience in pipefitting, welding, or pump and equipment repair is required. Must possess mechanical ability, an electrical aptitude and vocational or trade school certificates or diplomas relating to a minimum of one craft within welding, plumbing, pipefitting or electrical areas. Must be certified to operate a forklift. Computer skills are preferred. Must be willing to cross-train in other specialized crafts within Maintenance department. Dependability, effective communication skills, ability to follow instructions, good attendance and willingness to work overtime are essential. Organization Relationships: Internal Contacts: Frequent employee contact at all levels of the organization. External Contacts: Vendors and visitors. Working Conditions: May be exposed to dirty, wet or odorous conditions. May work in climatic weather changes, various height or underground levels while operating in confined spaces or in shored ditches which may be six feet or more below ground level. May be required to participate in Medical Testing Program or Hazardous Materials training. Effect of Errors: Poor repairs or failure to comply with safety practices may lead to injury of self or others. Errors in repairs may result in customer delays or dissatisfaction. Physical Demands/Dexterity: Requires frequent standing, walking and climbing a ladder (up to 30 feet). May be required to maneuver equipment up to 100 lbs and lifting up to 50 lbs regularly. Must be able to crouch, bend, and twist to work on various equipment in various settings. Ability to use heavy power tools, including vibrational tools is essential. Working outside in adverse climate conditions is required, this can include, but is not limited to hot, humid, cold, or wet situations. Equipment Used: Power tools, welders, ladders, and standard tools are utilized frequently. Computer is used on a daily basis. Responsibility for Work of Others: No direct supervisory responsibilities; however, must be a team player. Reporting observation of non-compliant or unsafe situations to supervisor or EH&S manager as required. Authority: Based on knowledge and experience makes judgment calls and takes immediate action for basic repairs and response to alarm conditions in accordance with documented procedures.

Branch Manager | Plumbing Supply Jersey City, NJ Area | Onsite | Base Salary + Monthly Performance Bonus Compensation: 100k-120k Salary + Monthly bonus of 4k Benefits: Industry Leading & Comprehensive A leading, family owned plumbing supply company is seeking a sales driven Branch Manager to lead and grow an established North Jersey location. This is an opportunity for an experienced plumbing industry leader who wants real ownership of a branch, the ability to grow the business, and compensation tied to results. The company has a strong reputation, premier product lines, an established customer base, and the flexibility of a privately held organization where decisions can be made quickly. What You'll Own • Drive branch sales, gross profit, and market share, • Develop new business with plumbing contractors, builders, developers, and trade professionals, • Strengthen and expand relationships with existing customers, • Lead, coach, and hold the sales team accountable for results, • Stay active in the market through customer visits, job sites, and business development, • Oversee overall branch performance and create a high energy, customer focused culture What We're Looking For • Strong plumbing supply industry experience, • Proven sales and business development success, • Established relationships within the contractor and trade community, • Experience leading and developing salespeople, • Strong knowledge of plumbing products, including pipe, valves, fittings, fixtures, water heaters, and related products, • A hands on leader who is competitive, accountable, relationship driven, and motivated to grow a business Why Consider It? This is not a corporate maintenance role. The Branch Manager will have the opportunity to make an impact, grow the business, build a strong team, and be financially rewarded for performance. Compensation: Competitive base salary plus meaningful performance bonus. Location: Jersey City, NJ area. This is a full time, onsite leadership position.

Waterworks Sales Specialist | Inside / Outside Sales Location: Staten Island, NY or Clifton, NJ Position Type: Full-Time Employee Join a rapidly growing company that continues to invest in its people, infrastructure, and future. We are looking for an experienced Waterworks Sales Specialist with a background in Waterworks, underground utility, municipal water, sewer, drainage, and pipe sales. This opportunity can be structured around an experienced Inside Sales or Outside Sales professional. If you know the Waterworks market and are looking to take on more responsibility, grow your customer base, earn larger commissions, and be valued for the business and industry knowledge you bring, this is an opportunity worth exploring. What We’re Looking For • Current or prior Waterworks sales experience, • Experience in Waterworks distribution, underground utility sales, municipal waterworks, sewer, or drainage products, • Knowledge of ductile iron pipe, sewer pipe, plastic pipe, water distribution, drainage systems, and underground utility materials, • Experience selling to customers within the Waterworks and underground utility market, • Background in Waterworks inside sales, outside sales, account management, or territory sales, • Ability to develop, manage, and grow customer relationships, • Strong understanding of Waterworks products, customers, applications, and the sales process, • Ability to work from either Staten Island, NY or Clifton, NJ What We Offer • Highly competitive compensation and commission potential, • Strong benefits package, • Opportunity to take on greater responsibility as the company continues to grow, • Inside Sales, Outside Sales, or hybrid sales opportunity depending on experience, • Growing organization investing in its people and infrastructure, • Opportunity to expand your customer base, commissions, responsibilities, and career If you have a background in Waterworks sales, underground utilities, municipal water, sewer, drainage, or pipe distribution and are open to a stronger long-term opportunity, we want to hear from you.

Job Description Responsibilities • Translate design intent contract documents or 3D design models of Plumbing, Mechanical and HVAC systems into fabrication and installation detail Building Information Models utilizing BIM fabrication modelling software., • Work with engineers and managers to produce LOD400 BIM for mechanical and plumbing systems., • Work with General Contractor and other subcontractors to achieve spatial coordination of all trades., • Attend weekly coordination meetings, either onsite or virtually, to achieve spatial coordination of all trades., • Generate RFI's to be submitted to the design team when required., • Create detailed shop drawings for the purposes of fabrication and installation of associated trades., • Create and annotate shop drawings, hanger drawings, and sleeve drawings., • Create and export hanger and sleeve coordinates to be utilized by the robotic total station layout team for field layout., • Communicate with field personnel to ensure that fabrication and installation intent is clearly communicated on shop and spool drawings., • Mentor and train Junior VDC Specialists on the use of modelling and collaboration software., • Provide on the job training on the creation of fabrication and installation drawings and documents including bills of materials, pipe cut lists, fabrication labels, hanger labels, and reports., • Work with other team members to complete drawings and models as required to meet project schedules., • Maintain training and continued education for incumbent and team to continually improve accuracy and productivity., • Provide input to management regarding both hardware and software requirements to perform duties. Essential Skills • Proficiency in Autodesk Revit, AutoCAD, Autodesk Fabrication CADMEP, and Autodesk Navisworks., • Knowledge of BIM related software, • 5 or more years of experience with installation or 3D modeling of mechanical or plumbing systems., • Prior experience working at a mechanical contractor (preferred)Job Type & Location This is a Contract to Hire position based out of Newark, NJ. Pay and Benefits The pay range for this position is $40.00 - $70.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Newark, NJ. Application Deadline This position is anticipated to close on Oct 26, 2026. Workplace Type This is a fully onsite position in Newark,NJ. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionPlease do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking an experienced HVAC Pipefitter to join our team. In this role, you will build and maintain pipe systems in both residential and commercial settings. You will read blueprints, plan installations, and prepare pipes. The ideal candidate is analytical, with attention to detail and experience with pipes of a variety of materials. VRV/VRF a PLUS! Responsibilities • Review and interpret blueprints to understand project requirements, • Braze/solder copper parts and components using ASME brazing techniques, • Able to install, service, and repair water source heat pump systems, • Installation, repair, and maintenance of refrigeration systems, with particular expertise in handling the intricate network of pipes that carry refrigerants, • Inspect and prepare sites for construction operations, • Assemble and install piping systems such as ductile iron, PVC and steel, copper, • Test system functionality, • Repair any leaks or malfunctions, • Use a variety of hand and power tools, • Work with other construction professionals to complete projects, • Follow all relevant safety guidelinesQualifications, • Previous experience as a HVAC Pipefitter is preferred, • Strong mathematical and problem-solving skills, • Attention to detail, • Knowledge of all relevant health and safety guidelines, • Excellent communication skills, • Ability to meet the physical demands of the position, including lifting heavy objects, • Ability to work overtime when required

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber Helper to join our team. The Plumber Helper will support the Plumbing department by performing Plumbing work and assist Plumber on daily tasks and projects. Essential Functions • Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports., • Cut or drill holes in walls or floors to accommodate the passage of pipes., • Assist pipe fitters in the layout, assembly, and installation of piping for air, gas and water systems., • Cut pipe and lift up to fitters., • Fit or assist in fitting valves, couplings, or assemblies to tanks, pumps, or systems using hand tools., • Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes., • Excavate and grade ditches, and lay and join pipe for water and sewer service, • Disassemble and remove damaged or worn pipe., • Wear PPE as established by the company guidelines, • Any other tasks as assigned manager Required Education and Experience • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR o9jrOFjo5u

Job Description Summary: Esposito Construction has major sitework projects underway in throughout New Jersey and we’re looking for an experienced working Pipe Foreman to ensure optimum productivity and construction compliance. Must have experience with installation of utilities as well as knowledge of various sizes and types of drain pipe. If you are physically able to work on your feet 40+ hours a week and love working both in & outside than this is the job for you. Above all else, we value the safety of our workers and need a team player that believes in working safe and being on time/early every day. BENEFITS: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $35-55 DOE Responsibilities: • Lead a crew in the installation of underground utilities, water mains, fire mains, sewer mains and storm drains, • Execute pipe work in accordance with plans, specifications and directives from the Project Manager, • Being able to run a pipe crew and also manage all day to day activities on a site., • Knows and understands the production schedule., • Can plan daily work from the project's four-week schedule and executes same, • Can perform and train the essential job functions for any position on the pipe crew., • Identify, report and correct hazards. Qualifications: • Effective communication skills, • Ability to measure, perform construction math and calculate slopes, • Can set up and properly use a pipe laser and builder's level, • Knowledge of safe rigging and hoisting equipment and procedures, • Knowledge of PSCC and OSHA rules, including Safe trenching guidelines, • Understands optimum moisture, densities and compaction requirements, • Read and interpret plans, including pipe restraint joint charts, • Proper techniques for joining different types of pipe; push joint, MJ, restrained joints, TR Flex and flanged., • Heavy Equipment Operation Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job DescriptionPosition SummaryWe are seeking an experienced Conventional Dredge Operator for a potential long-term, full-time position. This opportunity is not tied to a specific project; we are hiring qualified candidates to support current and future assignments at various locations.The operator will be responsible for the safe and efficient mobilization, operation, assisting in general maintenance, and demobilization of dredging equipment. The ideal candidate has strong mechanical aptitude, basic Hypack knowledge, works effectively both independently and as part of a crew, and is willing to travel.Primary Responsibilities · Safely operate dredging equipment in accordance with project requirements and company procedures. · Mobilize, set up, operate, and demobilize dredging equipment. · Direct or assist crew members with placing shore anchors and cables. · Direct or assist with assembling, positioning, and laying pipe. · Verify dredge cuts. · Monitor depth gauges and other equipment to maintain the required excavation depth. · Perform daily equipment inspections and report mechanical or safety concerns. · Assist with equipment maintenance and troubleshooting. · Maintain a clean, organized, and safe jobsite. · Follow all company policies, safety procedures, and supervisor instructions. · Report to the project foreman and superintendent. Requirements · Previous dredge-operating experience. · Valid driver's license. · Authorization to work in the United States. · Ability to pass a background check and drug screening. · Ability to complete tasks with or without direct supervision. · Willingness to travel. · Availability to work out of town for extended periods, including weekends and holidays. · Ability to work approximately 75 hours per week, rotation-based. · Strong commitment to workplace safety and teamwork. Preferred Qualifications · Mechanical knowledge and equipment-maintenance experience. · Experience handling dredge pipe, anchors, cables, winches, and depth-monitoring equipment. · Construction, marine, or heavy-equipment experience. · HyPack/DredgePack Physical and Work Requirements · Ability to lift and carry up to 75 pounds. · Ability to perform physically demanding construction and general-labor duties for extended periods. · Ability to stand, walk, climb, bend, kneel, push, and pull throughout the workday. · Ability to work outdoors in heat, cold, rain, and other weather conditions. · Physical stamina to perform strenuous work for long periods. · Ability to work safely around water, heavy machinery, pipes, cables, and active construction equipment. Benefits Full-Time Traveling Position Schedule: Approximately 75 hours per week; rotation-based Compensation: Based on experience, $30.00 + Benefits: 401K, Medical/Dental/Vision; Life Insurance, STD, Accidental, PTO, Holiday Pay

Job Description POSITION SUMMARY: Remington and Vernick is seeking a licensed Professional Engineer (PE) with a minimum of 8 years of experience in HVAC/mechanical, plumbing, and fire protection systems design, including fire alarm systems, to join our growing MEP team as a Project Manager/Engineer. This role involves overseeing projects from concept through construction, mentoring junior staff, and playing a key role in delivering high-quality engineering services for educational, commercial, and industrial facilities. This position will be involved in the planning, design, and documentation of mechanical systems for a variety of project types, including educational, commercial, institutional, and industrial facilities. The ideal candidate has a well-rounded mechanical background, strong technical fundamentals, and experience coordinating across disciplines. The role includes direct interaction with clients, architects, and project stakeholders and requires the ability to communicate technical concepts clearly and professionally. PRIMARY DUTIES: • Design and analysis of HVAC systems, including air distribution systems, mechanical equipment selection, and controls concepts, • Design of hydronic systems, including chilled water, hot water, condenser water, and associated piping systems, • Design and coordination of plumbing systems, including domestic water, sanitary, storm, specialty piping systems, and fixture layouts, • Working knowledge of fire protection systems and coordination with fire protection designers and disciplines, • Perform equipment and system sizing calculations, including load calculations and pipe/duct sizing, • Prepare complete construction documents, including drawings, schedules, details, specifications, and engineering calculations, • Interpret and coordinate architectural, structural, and MEP background documents Client & Project Interface Responsibilities Serve as a client‑facing engineer, participating in project meetings, design reviews, and coordination calls Communicate design intent, technical recommendations, and system options clearly to clients and project teams Respond to client comments, agency reviews, RFIs, and contractor inquiries in a professional and timely manner Collaborate with architects, owners, and internal project managers to support project goals, scope, and schedules Represent the firm professionally in external meetings and during project execution Support construction administration activities as required, including submittal and shop drawing reviews and site visits KNOWLEDGE, SKILLS, AND ABILITIES: Strong verbal and written communication skills with the ability to explain technical concepts to non‑technical audiences Demonstrate the ability to take projects from inception to completion • Detail Oriented Solid understanding of applicable codes and standards (e.g., IMC, IPC, NFPA, ASHRAE) Proficiency with design and calculation software; AutoCAD experience required (Revit experience a plus) Ability to work independently with general guidance from a Project Manager and meet project deliverables and schedules EDUCATION/EXPERIENCE • Bachelor’s degree in Mechanical Engineering or equivalent education and experience 8+ years of relevant mechanical consulting engineering experience, including HVAC and plumbing design preferred CERTIFICATIONS/LICENSES REQUIRED • Professional Engineering licensure required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Technical Sales Engineer Northeast US Our client, a national construction products manufacturer, is seeking a technical sales professional (Pipe Products) to join their growing team. Primary Responsibilities: Employ technical skills to conduct presentations, develop project specifications and grow project pipeline. Develop and maintain professional relationships with accounts including consulting engineering firms, regulatory agencies, contractors, developers and landscape architects. Manage pipeline using CRM to measure project specific performance. Update continuously to ensure information is timely, accurate and complete. Provide technical and marketing assistance to other team members as needed. Continuously improve technical expertise and knowledge of product line, Competitive products and Civil Engineering infrastructure trends. Acquire and continuously improve consultative marketing and transactional selling skills. Account ownership – own the client relationship and leverage internal support network to deliver solutions. Attend local Engineering functions such as ASCE meetings and participate at local tradeshows. Other duties as assigned. Requirements: Bachelor of Science degree in Civil Engineering, Environmental Engineering, or a related field. Professional Engineer (P.E.) certification is preferred. Minimum 1-year of industry experience; experience specifying stormwater products, technical field promotion, or stormwater regulatory involvement is preferred. Ability to understand the needs of the engineer of record, site owner, and contractor and guide them to the appropriate product solution for each stormwater project. Ability to communicate technical information, concepts, and applications effectively using consultative marketing skills. Proficiency in interpreting civil site plans. Proficiency in Microsoft Office and CRM. Must have a valid driver's license. Ability to travel up to 40% within the assigned region. Consulting or Field Engineers encouraged to apply. For more information, please submit your resume to: blake@mriz.net Visit our website at www.mriz.net Due to the high volume of resumes received, only applicants with SPECIFIC EXPERIENCE requested by our clients will be contacted. All replies are held in strict confidence. MRI Zionsville WILL NOT share your personally identifiable information WITHOUT your permission. Keywords: sales, representative, professional, account executive, account manager, business development, Engineering, civil engineer, construction, sales engineer, building products, professional engineer, public works, DOT, construction materials, precast, concrete, architectural sales, prestressed, walls, floors, columns, beams, hollow core, pre-stressed precast, concrete, architectural sales, PVC, metal pipe, concrete pipe, HDPE pipe, stormwater, sewer, specifying products, waterworks, spec sales, technical sales, filtration, culvert, stormwater, storm sewer, hydraulics, storm, drainage

Technical knowledge and/or expertise in multiple areas of structural engineering including, but not limited to structural steel, reinforced concrete, masonry, foundations, pipe supports, equipment supports, platforms, access structures, industrial buildings, and applicable structural design codes an

Esposito Construction has major sitework projects underway throughout New Jersey and we're looking for an experienced working Pipe Foreman to ensure optimum productivity and construction compliance. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Dis

Waterworks Sales Specialist | Inside / Outside Sales Location: New York/New Jersey Metro area Position Type: Full-Time Employee Join a rapidly growing company that continues to invest in its people, infrastructure, and future. We are looking for an experienced Waterworks Sales Specialist with a background in Waterworks, underground utility, municipal water, sewer, drainage, and pipe sales. This opportunity can be structured around an experienced Inside Sales or Outside Sales professional. If you know the Waterworks market and are looking to take on more responsibility, grow your customer base, earn larger commissions, and be valued for the business and industry knowledge you bring, this is an opportunity worth exploring. What We’re Looking For • Current or prior Waterworks sales experience, • Experience in Waterworks distribution, underground utility sales, municipal waterworks, sewer, or drainage products, • Knowledge of ductile iron pipe, sewer pipe, plastic pipe, water distribution, drainage systems, and underground utility materials, • Experience selling to customers within the Waterworks and underground utility market, • Background in Waterworks inside sales, outside sales, account management, or territory sales, • Ability to develop, manage, and grow customer relationships, • Strong understanding of Waterworks products, customers, applications, and the sales process, • Ability to work from either Staten Island, NY or Clifton, NJ What We Offer • Highly competitive compensation and commission potential, • Strong benefits package, • Opportunity to take on greater responsibility as the company continues to grow, • Inside Sales, Outside Sales, or hybrid sales opportunity depending on experience, • Growing organization investing in its people and infrastructure, • Opportunity to expand your customer base, commissions, responsibilities, and career If you have a background in Waterworks sales, underground utilities, municipal water, sewer, drainage, or pipe distribution and are open to a stronger long-term opportunity, we want to hear from you.

Hiring CDL-A Truck Drivers • ROLL HARD, EARN HARD, • Top company drivers make up to $90,000/year*, • PAY THAT MOVES YOU, • Earn 27% of linehaul + strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU, • Strong pay, real perks, and respect on every mile Why Drive for P&S? At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for. And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. Regional Flatbed Driver - Company Job • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road. Driver Benefits • $5,000 sign-on bonus, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider + pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements • Valid Class A CDL, • 1 year of verifiable CDL A OTR experience

Location - Whippany NJ (Hybrid) Start Date - April 1st Rate DOE Job Description Full stack developer with GUI build experience Linux based systems Web hosting Tomcat Java Server side and Java Micro Services supported through Angular based GUI. We are planning to use internal framework based on Angular. Hands on with REST API's and SSO User Authentication implementation, based on AD Groups. Oracle DB Procedures/Functions knowledge, hands on. CI/CD Pipe line for Production releases, Nolio as an example. Project Build Maven and/or equivalent build based on GIT repositories. Knowledge about CHEF based deployments. Any scripting language helps.

As a Customer Service Associate, you combine top-notch customer service skills with genuine care for people to help customers feel comfortable while shopping at Lowe's. This is an excellent role for those who want to engage with customers and help them solve their home improvement challenges. Whether you need a part-time position or a place to plant yourself and grow, Lowe's is ready to support your goals. As a Lowe's associate, you'll gain access to many benefits beyond competitive pay and flexible schedules. • Make your well-being a priority with multiple top-tier health insurance options., • Explore educational opportunities with Lowe's tuition assistance program., • Take charge of your financial future with a company-matching 401(k) and optional Employee Stock Purchase Program., • Gain extra savings with a 10% Associate Discount., • Learn new trade skills with our Track to the Trades program. As a Customer Service Associate, you will welcome customers to Lowe's and help them find the right products and services for their home improvement needs. You will interact with customers throughout the day, help them find and select products, occasionally load merchandise, and ensure all customer needs are met. While you will spend most of your time listening to customers, answering questions, and organizing merchandise, your daily responsibilities may vary by department. Customer Service Associates work in one of the following departments, based on hiring needs and skillsets: Appliances, Cabinets, Flooring, Live Nursery, Inside Garden, Hardware, Tools, Millwork, Building Materials, Plumbing, Electrical, Paint, Home Dcor, Tool Rental, or Pro Services. • Welcome customers to Lowe's, answer questions, and deliver friendly and professional customer service., • Assist customers with locating and handling merchandise, • Down stock merchandise by looking for empty areas on shelves and replenishing supplies, • Process orders and deliveries accurately so customers receive merchandise as expected and on time, • Cross-functionally train in other areas of the store to help deliver the best customer service, • Prepare merchandise in your department based on customer needs (e.g., tint and mix paint, cut and thread pipe, cut and bundle wood, cut drywall, cut blinds), • Guide customers through shopping or checkout, • Complete other duties as assigned, • 6 Months Experience using a computer, including inputting, accessing, modifying, or outputting information, • 6 Months Experience using common retail technology, such as smart phones and tablets, • Reading, writing, and performing basic arithmetic (addition and subtraction), • Able to perform duties that may require prolonged standing, sitting, and other activities necessary to perform job duties, • Minimally lift 25lbs unassisted or over 25lbs with or without an accommodation, • 6 months of Retail and/or customer service experience, • Bi-lingual skills, • Certification in trade related to department (e.g., hardware, kitchen, plumbing, electrical, lawn and garden, and lumber/building materials) Lowe's commitment to growth and teamwork extends to the community as well. To better equip our stores and serve our communities, we strongly encourage bilingual, military, and veteran talent to apply and join our team. This role does not require regular travel; however, this role may need to travel occasionally to meetings, training, or to support neighboring stores. Working Conditions Environmental factors vary by location. You may be working in both inside and outside weather conditions. Exposure to varying climates, including extreme heat or cold, wet, damp, humid, windy, or drafty conditions, is possible. You may be exposed to constant or intermittent noises in addition to moving or shaking objects and equipment. Lifting methods vary based on role, weight, and volume. Associates must follow guidelines, limiting single lifts to 75 pounds. Team lifts are used minimally starting at 75 pounds or when needed. Powered equipment should be used as required, with proper training or assistance from a trained coworker. Lowe's Companies, Inc. (NYSE: LOW) is a FORTUNE 100 home improvement company with total fiscal year 2025 sales of more than $86 billion. Lowe's employs approximately 300,000 associates and operates over 1,750 home improvement stores, 540 branches and 120 distribution centers. Lowe's is a core value S&P 500 equity stock and a dividend aristocrat. Based in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing, improving community spaces, helping to develop the next generation of skilled trade experts and providing disaster relief to communities in need. For more information, visit Lowes.com. Pay Range: $17.00 - $19.05 per hour Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Lowe's is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Ferguson - - Responsibilities: Weld outlets onto steel pipe for fire sprinkler industry; Perform specialty welding tasks (spool pieces, flanges); Inspect for defects, dimensions, alignment, end preparations, and seam splits; Maintain a clean and safe welding station; Report equipment malfunctions a

Key Holders are responsible for opening and closing a store and performs other administrative duties in a retail setting. Be proficient at executing all store services, such as mixing paint, cutting glass, pipe, screen repair, and keys.

Branch Manager | Plumbing Supply Jersey City, NJ Area | Onsite | Base Salary + Monthly Performance Bonus Compensation: 100k-120k Salary + Monthly bonus of 4k Benefits: Industry Leading & Comprehensive A leading, family owned plumbing supply company is seeking a sales driven Branch Manager to lead and grow an established North Jersey location. This is an opportunity for an experienced plumbing industry leader who wants real ownership of a branch, the ability to grow the business, and compensation tied to results. The company has a strong reputation, premier product lines, an established customer base, and the flexibility of a privately held organization where decisions can be made quickly. What You'll Own • Drive branch sales, gross profit, and market share, • Develop new business with plumbing contractors, builders, developers, and trade professionals, • Strengthen and expand relationships with existing customers, • Lead, coach, and hold the sales team accountable for results, • Stay active in the market through customer visits, job sites, and business development, • Oversee overall branch performance and create a high energy, customer focused culture What We're Looking For • Strong plumbing supply industry experience, • Proven sales and business development success, • Established relationships within the contractor and trade community, • Experience leading and developing salespeople, • Strong knowledge of plumbing products, including pipe, valves, fittings, fixtures, water heaters, and related products, • A hands on leader who is competitive, accountable, relationship driven, and motivated to grow a business Why Consider It? This is not a corporate maintenance role. The Branch Manager will have the opportunity to make an impact, grow the business, build a strong team, and be financially rewarded for performance. Compensation: Competitive base salary plus meaningful performance bonus. Location: Jersey City, NJ area. This is a full time, onsite leadership position.

F&G Mechanical is seeking an HVAC Mechanical Estimator with experience performing HVAC pipe take-offs using computerized estimating software like Trimble MEP AutoBid Mechanical or similar. The Estimator is responsible for estimating and providing management with detailed pricing for development of b

F&G Mechanical is seeking an HVAC Mechanical Estimator with experience performing HVAC pipe take-offs using computerized estimating software like Trimble MEP AutoBid Mechanical or similar. HVAC Estimating experience in the construction industry, preferably the Mechanical side.

The Most Prestigious Mechanical Contractor in NY/NJ Market is seeking an HVAC Mechanical Estimator with experience performing HVAC pipe take-offs using computerized estimating software like Trimble MEP AutoBid Mechanical or similar. The Estimator is responsible for estimating and providing managemen

Ensure community facilities are well maintained.Schedule and participate in maintenance projects.Perform plumbing work such as clearing stoppages, replacing fittings, zone valves, pipe sections, etc.Perform carpentry work such as fitting doors, replacing molding, repairing structural framing, and re

Job Description Technical Sales & Customer Service • Act as the primary technical expert on the counter for plumbing, heating, HVAC, and boiler systems, • Assist customers and tradespeople in identifying parts, diagnosing issues, and selecting the correct products for their applications, • Take orders over the counter, answer product questions, and manage customer payments, • Provide prompt, helpful, and professional service to every customer Troubleshooting • Diagnose and troubleshoot plumbing, heating, HVAC, and boiler problems brought in by contractors and homeowners, • Interpret fault codes, error messages, and system symptoms across a variety of manufacturers, • Guide customers clearly and patiently through troubleshooting steps, including non-professionals, • Apply safety knowledge and know when to refer work to a licensed professional Leadership & Team Development • Mentor and support junior counter sales associates in developing product knowledge and customer service skills, • Stay current on new products, manufacturer updates, and industry codes; share knowledge with the team, • Collaborate with the General Manager on inventory needs and customer product feedback, • Assist with receiving and organizing inventory as needed Requirements Qualifications • 5+ years of experience in plumbing, heating, HVAC, or a related trade (field or counter experience accepted), • Demonstrated knowledge of plumbing systems, fittings, fixtures, valves, and pipe materials (copper, PVC, PEX, CPVC, cast iron), • Comprehensive knowledge of hot water and steam boiler systems, components, and controls, • Working knowledge of HVAC systems including forced air furnaces, central A/C, heat pumps, and mini-split systems, • Proven troubleshooting skills across plumbing, heating, HVAC, and boiler systems, • Strong communication skills; ability to explain technical concepts clearly to any audience, • Reliable, dependable, and team-oriented with a strong work ethic, • Comfortable using point-of-sale and inventory management software, • Must be able to keep up with a fast-paced workload Preferred • Prior counter sales or wholesale distribution experience, • Leadership or mentoring experience, • Trade license or certification (plumbing, HVAC, or related), • Familiarity with hydronic heating systems including radiant floor and baseboard applications Work Environment & Physical Requirements • On-site position at our East Orange, NJ store location, • Fast-paced retail and wholesale environment with a community feel, • Frequent standing, walking, and customer interaction throughout the shift, • Ability to lift and carry up to 50 pounds occasionally, • Overtime required; schedule may vary based on business needs Benefits • Competitive salary of $28–$38/hour based on experience, • Robust health benefits, • Vision insurance, • Dental insurance, • Paid vacation and sick time, • 401k program, • Growth and leadership opportunities, • Training available, • Company SWAG!, • Annual holiday party, • Free snacks available for employees!

Job Description Honest Networks is dedicated to delivering high-quality and affordable internet service as a catalyst for community growth, fostering learning, creativity, and enjoyment. We are a rapidly expanding, venture-backed internet service provider headquartered in Manhattan. We focus on offering gigabit internet service at transparent and affordable prices, all while providing exceptional customer service. We achieve this goal by employing individuals with high integrity, a strong work ethic, and a passion for continuous learning. If working in a fast-paced, results-oriented, and mission-driven environment excites you, we encourage you to apply and join our team. Learn more at www.honest.net. About the Role This is a full-time, in-person role. • Honest Construction Technicians would be responsible for constructing and building out our network in residential apartment complexes and office buildings in NYC, Northern NJ, CT, and Philadelphia., • Technicians run fiber and ethernet through building risers; mount and install networking equipment in MDF/IDF closets; and set up and align radios on rooftops., • This is a fast-paced environment where you are likely working with 1 other person, setting up 2-3 buildings per month. Personal Attributes • Comfortable working in a fast-paced environment, • Experience working with hand/power tools, • Excited to learn: we are looking for technicians who have strong technical competency but are always interested in continuously learning, • Problem solving attitude: able to troubleshoot issues Requirements • No degree required, • 1-3 years of experience with fiber optic, ethernet cable or electrician/conduit work, • Ability to run fiber and cat5e/6 cabling through a large multi-tenant building (office, apartment complex), • Ability to install, terminate, and test troubleshoot network cabling, including through existing interior and exterior conduit, • Ability to power and test networking switches and other networking hardware, • Comfortable using mass transit operate during the day, • Comfortable working in high-rises and on rooftops, • Comfortable working in confined spaces, • Ability to read, understand, and follow work orders & change orders, • Capable of lifting up to 50 pounds, • Bonus, • Ability to bend pipe up to 1", • Ability to terminate fiber, • Knowledge of DC power Benefits • Attractive salary (estimate of $26-34/hr + OT) based on level of capabilities and experience, • Performance bonus potential, • Paid-time off (PTO), • Medical and dental benefits, • Metro card reimbursement Honest Networks' Values Honest is committed to providing equal employment opportunities to all individuals. We value diversity and do not discriminate based on race, color, ethnicity, age, gender identity and expression, sexual orientation, religion, national origin, socioeconomic status, disability, veteran status, or any other legally protected characteristic. We offer reasonable accommodations to applicants with disabilities upon request to facilitate their participation in the hiring process.

Job DescriptionDescription: Signing Bonus $5,000! The NFP Nurse Home Visitor (NHV) reports to the Nurse Supervisor and is responsible for providing comprehensive nursing services to first-time parent(s) eligible for the NFP program. Nurse home visitors are responsible for maintaining the highest standards in clinical nursing practice, case management and care coordination, adherence to the NFP model, and to policies, procedures, guidelines, and standards of NFP and of PMCH. This role is central to promoting healthy pregnancies, positive parenting practices, and early childhood development from early pregnancy through a child’s second birthday. Working within a strength-based, culturally responsive framework, this position supports improved health outcomes and family well-being in underserved communities. Essential Functions • Provide in-person home visitation to eligible families and carry a caseload of up to 25 clients in accordance with the NFP Model Elements and guidelines, • Complete all required NFP education and nurse-home visitor competency requirements, including PIPE: Partners in Parenting Education, and ongoing professional development and webinar training, • Develop therapeutic relationships and utilize concepts of reflection and motivational interviewing with families in a home visiting environment, • Follow nursing process in implementing NFP into nursing practice, • Assess the physical, emotional, social, and environmental needs of parents and their families as they relate to the NFP domains, • Assist parents and their families in establishing goals and outcomes; provide education, support, and referral resources in attaining goals; evaluates clients’ progress and plans home visits in accordance with clients’ goals and NFP outcomes, • Consult and collaborate with other professionals involved in providing services to families, • Meet with NFP Nurse Supervisor weekly for clinical supervision and schedules joint home visits every four months, • Maintain HIPAA confidentiality standards, adhere to the ANA and NJ nursing process and standards, code of ethics Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Requirements: • Associate Degree in Nursing (ADN) required; Bachelor of Science in Nursing (BSN) preferred, • Current New Jersey RN license and BLS certification required, • Two years' experience in maternal/child health, public health, home visiting, or mental/behavioral nursing preferred, • Strong documentation skills to ensure data entry is completed correctly on time, • Bilingual English/Spanish required, • Excellent verbal, written, and interpersonal communication skills, • Ability to work independently and manage client visit schedules to meet program visit requirements, • Proficient with Microsoft Office Suite DEIB Drivers for Success PMCH aims to foster a workplace culture that prioritizes diversity, equity, inclusion, and belonging. Our collective vision is to create an antiracist organization through: • Encouraging bidirectional and transparent communication, • Promoting a culture of belonging, • Practicing cross-program collaboration and engagement, • Engaging in continuous learning/enrichment, • Embracing inclusive representation and practices Functional Requirements of the Role This role may involve a range of physical, sensory, and cognitive tasks. We are committed to providing reasonable accommodation to support individuals in performing essential functions. Immunization Policy All PMCH employees must comply with the guidelines of our Immunization Policy.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Beverage Manufacturing Plant Mechanic - Irvington, NJ Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _.Seeking Plant M

Our Partner is expanding its Harrison, NJ fabrication facility and is looking for an experienced Metal Fabricator to join its team.This is an excellent opportunity to work on diverse, high-profile projects throughout the New York City area while developing your skills across the full fabrication pro

The Maintenance Superintendent II directs the activities of the Low Voltage, High Voltage and Instrumentation personnel within the Maintenance Department.Will be responsible for overseeing major repair projects pertaining to the wastewater treatment infrastructure, which includes the coordination of

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications.Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabricat

Founded in 1960, RW Dake Construction is an employee-owned specialty general contractor with 11 regional offices across New York, New Jersey, New England, Maryland, North Carolina, and Florida.For more than 65 years, RW Dake Construction has delivered the experience, quality, and safety our clients

Work directly for a Global Logistics company in Northern NJ (Bergen County) Maintenance Mechanic Join a stable, growing company where your maintenance expertise will keep critical production equipment running safely and efficiently.If you enjoy troubleshooting, problem-solving, and hands-on work in

Reports to: Project Manager .Spriggs Excavation is recruiting for a full-time, 100% travel position.This role requires continuous travel to project sites across multiple states based on business needs and project schedules.Employees in this position should expect to be assigned to one location f

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications.Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabricat

The Project Superintendent provides field supervision to ensure Westwood’s delivery of quality construction services to its clients by effectively managing all field project activities for jobs assigned to them.It is expected that assigned projects will be completed safely, on time, and within

Our client is seeking an experienced.This is an exciting opportunity to join one of the leading General Contractors in the region and to be a part of their growth!.Direct and supervise field crews, equipment, and subcontractors on-site.Coordinate daily work plans with the Project Manager and project