Trabajos pipe en Atlanta, GeorgiaCrear alertas

Clean, running water and heat are necessities of life, and as a Plumber for the Army National Guard, you’ll train for a career that will always be in demand.In this role, you will work on pipe systems for water, steam, and waste, as well as hydraulic and pneumatic systems.Duties include reading dr

Job Description 10‑4 Logistics USA seeks experienced, full‑time W‑2 Class A CDL drivers based in Atlanta, GA to operate flatbed freight across the contiguous United States. These positions are intended for drivers who prefer regional and over‑the‑road (OTR) schedules with consistent weekly home time. The company provides steady freight, late‑model equipment, 24‑hour dispatch support, and comprehensive benefits beginning on day one. Compensation and incentives • Typical gross pay: $1,800–$2,100 per week; drivers compensated at 27% of the load., • Sign‑on bonus: $5,000 total., • W‑2 employment hauling year‑round flatbed freight on regional and OTR lanes operating from an Atlanta, GA base., • Late‑model, company‑assigned tractors and paid orientation., • No forced‑dispatch policy and 24‑hour dispatch support., • Day‑one medical, dental, and vision insurance., • 401(k) with company match after eligibility., • Paid time off and paid holidays., • Safely operate a Class A tractor‑trailer in compliance with DOT and company regulations., • Perform flatbed load securement and freight protection, including tarping and the use of straps, chains, and binders (approximately 40–50% of loads require tarping)., • Haul regional and OTR flatbed freight with typical runs up to 2,000–2,500 miles covering multiple states., • Maintain accurate ELD logs, trip reports, and DVIRs; conduct pre‑trip and post‑trip inspections and promptly report maintenance needs., • Manage schedules to meet pickup and delivery commitments and maintain on‑time performance., • Valid Class A CDL., • Minimum 1 year OTR driving experience and at least 6 months flatbed experience., • Experience hauling steel and steel pipe is preferred., • Demonstrated proficiency with straps, tarps, chains, and binders for load securement.

OneSparQ is looking for a Heavy Civil Estimator for a construction company in Smyrna, GA. Required Skills: • 5+ years of estimating experience and ability to manage the full pre‑construction process, • Strong understanding of water/wastewater projects, • Ability to interpret civil, pipe, and structural plans and specs, • Experience estimating deep foundations, excavation, and underground work, • Proficiency with AGTEK Additional Skills: (not required) • Understanding/experience negotiating the Southeast market landscape Responsibilities: • Proven mastery of the full pre-construction lifecycle from inception to final submission, • Expert-level command of structural and civil drawings, plans, and specifications, • Advanced proficiency in AGTEK for earthwork analysis and production estimates, • High-level proficiency in Microsoft Excel for complex cost-modeling and Bluebeam for digital takeoffs and document management, • Demonstrated success in evaluating and negotiating competitive proposals from subcontractors, • and vendors, • Deep understanding of market volatility and regional pricing trends across the Southeast

Job Description Job Title: Facility Maintenance Technician Pay 22 - 28 per hour Job Description We are seeking a skilled Facility Maintenance Technician to ensure the smooth operation and maintenance of building facilities, electrical and mechanical systems, and plumbing. This role involves working with a variety of tools and equipment, performing routine preventive maintenance, and addressing any mechanical problems that may arise. Responsibilities • Perform routine preventive maintenance to ensure equipment and fixtures run smoothly and building systems operate efficiently., • Inspect and test equipment to diagnose mechanical problems and determine how to correct them, consulting blueprints, repair manuals, or parts catalogs as necessary., • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment., • Inspect drives, motors, and belts, check fluid levels, replace filters, and perform other maintenance actions following checklists., • Clean or lubricate shafts, bearings, gears, or other parts of machinery., • Adjust functional parts of devices or control instruments using hand tools, levels, plumb bobs, or straightedges., • Repair or replace defective equipment parts using hand tools and power tools, and reassemble equipment., • Record type and cost of maintenance or repair work., • Maintain the safe operation and maintenance of building facilities, electrical and mechanical systems, and plumbing., • Operate and maintain specific equipment, conduct surveys and inventories, and respond to customer complaints., • Read and interpret blueprints, drawings, schematics, and written technical machinery documents to troubleshoot areas and make repairs accurately., • Ensure compliance with applicable regulations, policies, and procedures., • Install wall-hung furnishings and equipment., • Minimum of 2 years of experience in HVAC equipment and systems, with commercial equipment preferred., • Minimum of 2 years of experience in electrical work including lighting, outlets, alarms, and understanding electrical safety for 120, 220, and 277 voltage., • Experience with air compressors, blueprints, HVAC systems, split systems, rooftop units, heating, air conditioning, and ventilation. Join one of the leading employers in Atlanta, GA, known for its strong community presence and excellent work environment. Enjoy holiday and vacation pay while on contract, with the opportunity for permanent placement. Work Environment Work in a dynamic college university setting, both indoors and outdoors, across nearly 200 buildings divided into 7 zones. Each zone has a dedicated supervisor to manage work orders. The role includes working around public buildings and research animals, with shifts from 8 AM to 4:30 PM or 7 AM to 3:30 PM depending on the department. Job Type & Location This is a Contract to Hire position based out of Atlanta, GA. Pay and Benefits The pay range for this position is $22.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety FabLogix is built on the principle of doing what we say we are going to do. Our execution strategy is powered by cutting-edge automation, seamlessly connecting digital drawings directly to our machines. Housed in a modern 150,000-square-foot facility, we are able to provide high throughput capacity to deliver on the most challenging schedules. FabLogix is part of Kelso Industries, with 3,500+ employees across 29 operating companies, delivers top HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a high-performing team. Learn more about us at Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Job Title: CDL Class A Driver / Shipping Helper Location: Duncan, SC Schedule: 1st Shift Employment Type: Full Time Job Summary The CDL Class A Driver / Shipping Helper is responsible for safely transporting materials and supporting daily shipping and receiving operations within the fabrication facility. This role is a blend of driving and hands-on shop support, ensuring timely deliveries while maintaining organization, accuracy, and safety in the shipping area. Key Responsibilities: Required Qualifications • Valid CDL Class A license with clean driving record, • Must have a DOT Medical Card., • Minimum 2+ years of commercial driving experience required., • Experience in a fabrication, manufacturing, or construction environment preferred, • Forklift experience preferred (or willingness to be trained), • Ability to lift-up to 50 lbs. and work in a physically active environment, • Strong attention to detail and commitment to safety., • Operate company vehicles to transport materials, pipe spools, and equipment to and from job sites, vendors, and other locations, • Ensure all loads are properly secured and compliant with DOT regulations, • Perform pre-trip and post-trip inspections and report any issues immediately, • Maintain accurate delivery logs and required documentation, • Assist with inventory handling and material staging, • Assist with loading and unloading materials using forklifts or other equipment, • Support other departments as needed during downtime from driving duties, • Follow all PPE requirements and safety protocols, • Stable workload supporting ongoing fabrication projects, • Strong emphasis on quality, organization, and teamwork, • Opportunity to work across multiple departments in operations, • Competitive pay and benefits Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job DescriptionOur company is looking for experienced CDL-A Flatbed Truck Drivers that know how to work around steel and pipes as well as safely securing said freight. This position offers a weekly home reset and also a full benefits package. Position Overview and Pay:$1,800 - $2,100 per week via direct depositSign-on Bonus: $5,000 in totalPlus Additional Pay such as detention, layover, breakdown and tarping (40%-50% of loads require tarping)2,000- 2,500 miles per week on average - Running all 48 states, but we operate in 5-state regional routesMonday-Friday\Saturday and a 34h weekend resetNo forced dispatch and access to 24h experienced and professional support teamFull Benefits Package (Medical, dental, vision and 401(k) programme with company support)Requirements: Valid Class A-CDLAt least 1 year of OTR driving and a minimum of 6 months of flatbed experience.Freight Knowledge and Securement Skills - Experience hauling pipe and steel with proficiency with chains, tarps, staps and binders.Clean MVRMust meet hiring and DOT requirementsApply Now If you feel like you fit this position send us your application and our team will get back to you as soon as posible.

Job DescriptionSalary: We are looking for full-time commercial drivers in Atlanta, Ga who have experience in: • working on our yard and be heavily involved in inventory management, • helping pull orders, • pass a background check, drug screen, and driving record check, • maintain a regular, dependable attendance record, • know Atlanta, Ga and the surrounding area very well, and be very punctual, • be able to work variable hours which may include weekends, holidays and overtime, • be able to lift 50-75 pounds In addition to offering competitive pay and benefits, we are committed to furthering the career development of our employees. We believe in providing training and career development opportunities for employees who demonstrate a strong work ethic, think creatively, and manage time and projects efficiently and safely.

Job DescriptionCommercial HVAC Installer Marietta, GA 30062 Pay: $60,000 $150,000 per year About Us Founded in 1962, E. Smith Heating & Air Conditioning is a leading HVAC contractor serving commercial and residential projects across Georgia and the Southeast. Were known for quality workmanship, strong ethics, and reliable service. Benefits • Medical, Dental, Vision & Life Insurance (paid for employees), • 401(k) with company match, • Paid holidays & vacation, • Company phone, uniforms & tool allowance, • Sign-on bonus & department bonuses, • Year-round work & advancement opportunitiesPosition Summary We are seeking an experienced Commercial HVAC Installer to join our team. This role involves installing HVAC systems, ductwork, and controls on commercial job sites while ensuring safety, quality, and code compliance. Travel is required MondayFriday across the Southeast. Responsibilities • Install and replace commercial HVAC systems and ductwork, • Wire controls, pipe units, and perform system start-ups, • Read blueprints, schematics, and wiring diagrams, • Follow all safety protocols and maintain compliance, • Complete job documentation (timesheets, reports, warranties), • Operate company vehicles and pick up materials as needed, • Maintain clean, organized job sites and company vehiclesRequirements, • 35+ years of commercial HVAC installation experience, • EPA Certification (required), • Valid Georgia drivers license (clean MVR), • Must be able to obtain DOT license, • High school diploma or GED, • Ability to read blueprints and wiring diagrams, • Must have HVAC tools and equipment, • Ability to lift 50+ lbs and work in various conditions, • Willingness to travel MondayFriday (required), • Must pass background check and drug screeningWhat Were Looking For, • Reliable, hard-working, and safety-focused, • Team player with a professional attitude, • Strong attention to detail and workmanship

Job DescriptionSalary: Empire Pipe and Supply is seeking a reliable and hardworking Warehouse Operations Associate to join our team. As a Warehouse Operations Associate, you will be responsible for maintaining our warehouse and yard facilities, organizing inventory, and assisting with loading and unloading of products. You will also be responsible for interacting professionally with customers and co-workers, assisting drivers with deliveries. Responsibilities: Maintain warehouse and yard facilities in a clean and organized manner Assist with inventory management, including receiving and stocking products and conducting inventory cycle counts Load and unload products, including heavy items Operate forklifts and other equipment as needed Assist with shipping and receiving duties, and communicate any order discrepancies to inside salesmen Assist drivers with proper loading and routing of deliveries, and maintain driver records such as delivery tickets and fuel receipts Keep the yard cleaned and organized, and ensure all drivers are operating trucks and forklifts in a safe manner Comply with all safety rules and company policy and procedures

Job Description JOB SUMMARY Experienced HVAC Service Technicians (Journeyman) will be required to perform skilled work in the installation, repair, and maintenance of heating, ventilation, and air conditioning equipment systems. Under the direction of the service manager a technician will install, diagnose, inspect, repair, and maintain and service a wide variety of mechanical equipment. DUTIES & ESSENTIAL JOB FUNCTIONS · Install, diagnose, inspect, repair, maintain, and service a wide variety of heating, ventilation, and air conditioning equipment and systems. · Repair and maintain hot water systems, wall heaters, ventilation units and air conditioning units. · Replace fans, belts, motors, gaskets, filters, and compressors. · Adjust and install switches, gauges, thermostats, valves, tubing, transformers, pressure regulators, controllers, and other parts. · Descale tubing, cut and thread pipe, make pipe and electrical connections. · Add refrigerants and oil; test for defective parts; make electrical repairs related to air conditioning, heating, and ventilation equipment. · Determine requirements for parts, materials, supplies, tools and equipment; establish cost of repairs and equipment replacement; check and test new equipment. · Operate specialized machinery, equipment and tools utilized in the repair and maintenance of heating, ventilation and air conditioning. · Maintain tools, equipment, and supplies in a safe and orderly condition. · Perform related duties that are assigned. BASIC QUALIFICATIONS · HVAC Apprenticeship School or Technical School training with combination of at least 7 years of Service Technician experience. · Valid driver’s license. Employees in this classification must maintain insurability during the term of employment. · Universal EPA Certification PREFERRED QUALIFICATIONS · Standard practices and theory of the HVAC trade · Materials, methods and tools used in the operation and repair of Commercial HVAC systems. · Applicable building codes, ordinances, and regulations of state and local authorities pertaining to Commercial HVAC · Air compressors and pneumatic controls. · Health and Safety regulations · Basic record-keeping techniques · Proper methods of storing equipment, materials, and supplies KNOWLEDGE, SKILLS, ABILITIES, AND CHARACTERISTICS · Calibrate systems · Perform preventative maintenance and routine servicing of equipment. · Diagnose defects and install, repair, and maintain heating, ventilating, and air conditioning units. · Interpret and work from plans, diagrams, blueprints, shop drawings, sketches, and specifications · Follow oral/written instructions and directions · Operate specialized machinery, equipment and tools utilized in the repair, and maintenance of heating, ventilation, and air conditioning. · Communicate effectively both orally and in writing. · Work cooperatively with others. · Work independently with little direction · Meet schedules and time lines · Maintain routine records WORKING CONDITIONS AND PHYSICAL EFFORT · Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises. · Work environment involves some exposure to construction, mechanical and electrical-related hazards or physical risks, which require following basic safety precautions. · Moderate physical effort. Requires handling of average-weight objects up to 50 pounds and extensive standing and walking. · Work requires local and occasional out-of-town travel to job sites and customer locations. · Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and scaffolds and to negotiate work areas under construction. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR PvEjitFKRZ

Job Description Duininck is a third-generation family-led company focused on building strong communities through our relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. Duininck Golf is a nationally recognized leader in golf course construction, specializing in renovations, restorations, re-models and new course development. Our mission is to deliver excellence by “Building The Best Golf”. *Must be able to travel for extended periods of time across the United States. All team members must have reliable transportation to get to job sites. This seasonal full-time position comes with a strong benefits package including: • Competitive pay range of $20 to $28 per hour, based on experience, • Paid Time Off, • Housing Fully Covered and other travel incentives, • Strong Health Plans to choose from, • Dental & Vision Plans, Company Paid Life insurance & Short-Term Disability, • Position specific personal protective equipment provided Key Responsibilities: • Assist with installation of irrigation systems, including pipe, valves, fittings, wiring, and sprinkler heads., • Perform trenching, backfilling, compaction, and site cleanup activities., • Load, unload, and move materials, tools, and equipment around the job site., • Operate simple equipment such as utility vehicles and dump trucks., • Cut, glue, and assemble PVC pipe according to instructions and specifications., • Follow all safety procedures, including use of personal protective equipment (PPE)., • Maintain a clean, organized, and safe work area., • Take direction from foremen and supervisors and work effectively as part of a crew., • 1-3 years' experience in irrigation installation with golf course irrigation experience preferred., • Ability to perform physical labor in outdoor conditions for extended periods., • Willingness to learn and operate irrigation equipment., • Ability to follow instructions., • Dependable, punctual, and able to work as part of a team., • Valid driver’s license preferred., • Ability to lift up to 50 lbs repeatedly., • Ability to bend, kneel, dig, and stand for long periods., • Ability to work in varied weather conditions., • Willingness to work extended hours and Saturday. Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Job Description We are seeking a hands-on Process & General Maintenance Lead to support safe and reliable operations across our chemical and API manufacturing facility. This role combines equipment maintenance, process support, and building upkeep, ensuring the entire site operates efficiently and safely. The ideal candidate will be a practical problem solver with strong mechanical skills, basic process knowledge, and a commitment to maintaining a clean, organized, and hazard-free facility. Key Responsibilities: Safety & Compliance: • Maintain a safety-first mindset and enforce safe work practices in all maintenance and repair tasks., • Follow all OSHA, EPA, and GMP safety standards and plant procedures., • Perform and document lockout/tagout (LOTO) and hot work activities., • Identify and report potential hazards, leaks, or unsafe conditions immediately., • Support the site goal of zero accidents and zero environmental incidents. Equipment & Process Maintenance: • Perform preventive and corrective maintenance on process equipment including pumps, motors, valves, piping, mixers, and tanks., • Troubleshoot mechanical issues and perform repairs or coordinate external contractors when needed., • Support production operations by ensuring equipment reliability and readiness., • Assist with cleaning, flushing, and setup of process systems as required., • Maintain accurate maintenance logs and parts usage in SAP or the plant’s maintenance tracking system. Building & Facility Maintenance: • Perform general building maintenance and facility repair work, including painting, patching, carpentry, plumbing, and light electrical work., • Maintain facility infrastructure such as floors, walls, doors, lighting, and ventilation systems., • Ensure exterior areas, loading docks, and storage spaces are kept clean, organized, and hazard-free., • Coordinate with vendors for larger building or utility repairs when necessary., • Support emergency and weather-related maintenance as needed. Continuous Improvement & Reliability: • Identify opportunities to improve safety, equipment uptime, and maintenance efficiency., • Recommend upgrades or improvements to tools, work areas, and maintenance processes., • Maintain tools, supplies, and maintenance areas in a safe and organized condition., • Support small capital projects and process modifications. Requirements • High school diploma or GED required; technical or vocational training preferred., • 5+ years of hands-on maintenance experience in a chemical, manufacturing, or industrial setting., • Working knowledge of mechanical systems, pumps, valves, piping, and basic electrical repair., • Ability to read and interpret maintenance manuals, safety procedures, and basic schematics., • Familiarity with GMP and OSHA safety practices., • Capable of safely handling tools, ladders, and basic construction materials., • Basic computer literacy for logging maintenance data (SAP or similar system experience a plus)., • Strong attention to detail, organization, and safety awareness. Preferred Experience: • Prior work in a chemical or pharmaceutical manufacturing environment., • Basic welding, pipe fitting, or industrial painting experience., • Forklift operation or maintenance certification., • Knowledge of spill prevention and hazardous material handling. Work Environment: • Chemical/API facility with exposure to industrial equipment and materials., • Requires regular use of PPE (personal protective equipment)., • Hands-on, physical role with frequent walking, climbing, and lifting (up to 50 lbs)., • Must be comfortable working both indoors and outdoors in variable conditions. Benefits 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance

Job Description Company Overview: United Land Services (ULS) is a leading full-service landscaping company, providing a comprehensive range of commercial landscape installation and maintenance services. Our expertise spans landscape design, maintenance, irrigation systems, hardscapes, and outdoor lighting. We proudly serve diverse properties, from single-family home developments to condominium complexes, commercial buildings, and shopping centers. Job Description: We are currently seeking an experienced Irrigation Technician to join our team. In this role, you will be responsible for new irrigation system installations, as well as general service, preventative maintenance, troubleshooting, and repairs of previously installed irrigation systems. Your expertise will ensure that irrigation systems are functional and efficient, contributing to the overall success of our landscaping services. Responsibilities: • Perform new irrigation system installations and provide general service, maintenance, troubleshooting, and repairs for existing systems., • Troubleshoot and repair conventional and two-wire systems using specialized tools and devices., • Troubleshoot and repair controllers, wire paths, decoders, wire connections and grounding, • Repair and replace rotor and spray heads, valves, and pipe breaks from ½” – 6”., • Utilize blueprint knowledge to execute tasks effectively., • Ensure adherence to production and maintenance schedules without compromising customer service or quality., • Experience: Minimum of 3 years of experience in irrigation system installation and maintenance., • Technical Proficiency: Display a working knowledge of conventional and two-wire systems., • Blueprint Understanding: Ability to understand and interpret blueprints., • Competitive Compensation: Enjoy top pay that reflects your skills and dedication., • Guaranteed Hours: Benefit from guaranteed hours with potential for overtime., • Weekly Pay: Experience the convenience of weekly pay on Fridays., • Comprehensive Benefits: Access health, dental, vision, life insurance, and a matching 401K plan., • Paid Time Off (PTO)

Job DescriptionHiring for a Travelling position - $28-40 starting base pay - Travel role with Per Diem - Can start ASAP!!! We are seeking a skilled Commercial Supermarket Refrigeration Installer to join our team. This role focuses on the installation, assembly, and startup of supermarket refrigeration systems, including extensive in‑case copper brazing work. The ideal candidate is detail‑oriented, safety‑focused, and experienced in commercial refrigeration installation environments. Key Responsibilities: • Install commercial supermarket refrigeration systems and components, • Perform compressor installations and refrigerated case installation, • Execute copper pipe fitting and brazing, including in‑case brazing, • Replace defective parts and components as needed, • Assist with refrigerant recovery, replacement, evacuation, and charging, • Perform basic electrical diagnostics and troubleshooting, • Insulate piping and ensure installations meet quality and safety standards, • Utilize test and diagnostic equipment including meters, gauges, reclaim machines, and vacuum pumps, • Follow lockout/tagout and jobsite safety procedures, • Communicate technical information clearly with customers, vendors, and internal teams Additional Job Details: • This role supports new installations and remodels/refurbishments of commercial supermarket refrigeration systems at grocery stores throughout the Midwest and Southeast, • Work is performed in traveling crews of 6–8 technicians, • Project durations typically range from 2 weeks to 18 weeks, • Consistent, year‑round work — technicians generally roll directly from one project to the next with minimal downtime, • Flexibility is built in: when schedules allow, technicians can return home for weekends and may request time off between projects as needed, • Work schedule is 10‑hour night shifts, typically 8:00 PM – 6:00 AM, • Standard work week runs Sunday night through Thursday morning, • Average weekly hours are approximately 45–50 hours If you would like to schedule a call with me when you are available, please CLICK HERE. If you’re interested or know someone who might be, call me at 3143170199. For quick response Job Type & Location This is a Permanent position based out of Atlanta, GA. Pay and Benefits The pay range for this position is $58240.00 - $91000.00/yr. Weekly Pay. Medical, Vision, Dental, Lift, and Supplemental Benefits. Vehicle Allowance. Per Diem. Company books and pays for hotels. Company paid health insurance plan for Employee. 401k w/ match after 1 year of employment. Workplace Type This is a fully onsite position in Atlanta,GA. Application Deadline This position is anticipated to close on May 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Description Company: Superior Contracting & Maintenance Superior Contracting & Maintenance is currently hiring EPA-certified, insured 1099 HVAC technicians to manage rotating residential service calls and HVAC installations. This is not a job board, we provide consistent, direct work from our portfolio partners. There are no fees, no lead chasing, and no upselling, just paid work delivered straight to you. This opportunity is ideal for part-time technicians or independent HVAC contractors looking to supplement their current workload with flexible, steady maintenance and installation jobs. About Us: Superior Contracting & Maintenance is a well-established home repair and maintenance company with over 13 years of experience, serving a diverse client base just north of our primary market in Atlanta, GA. We operate across AL, AZ, GA, FL, NC, OK, SC, TN, and TX, offering a wide range of services including plumbing, HVAC, electrical, carpentry, tree work, roofing, drywall repair, interior and exterior painting, flooring, remediation, make-readies, appliances, and more. Our mission is to deliver reliable, high-quality service while maintaining strong communication and long-term customer relationships. Our technicians primarily work within their local areas on residential jobs. Our maintenance division supports property management partners, our direct-to-client services assist homeowners, and our projects department handles larger contracts and re-pipe initiatives. Responsibilities • Diagnose and repair residential HVAC systems (split systems, heat pumps, mini-splits, etc.), • Complete first-trip service calls within assigned “Not-to-Exceed” (NTE) budgets (average $150–$350), • Submit estimates for more complex or multi-visit repairs, • Perform full system replacements and installations, with labor pay ranging from $1,200–$1,800 (depending on scope and location), • Communicate with dispatch and provide updates through the mobile job portal, • All materials are purchased by Superior, • Must be located in the United States Requirements • EPA Certification (required due to refrigerant regulations), • Active General Liability Insurance (COI required), • Must own a truck, van, or SUV and have your own tools, • Ability to navigate mobile job portals and communicate clearly, • Must complete a short onboarding call and training prior to receiving assignments, • Valid driver’s license and reliable transportation Disqualifiers • No active insurance coverage, • Missing EPA certification, • Unwillingness to complete onboarding or training call, • Poor communication or failure to follow through on assigned jobs Benefits • Diagnostic Trip Pay: $65–$85 per call (based on trade and job complexity), • Install Labor Pay: $1,200–$1,800 per full system installation (varies by location and scope), • Fast Pay: Direct deposit issued after job verification, with no job board fees or subscriptions If you are committed to delivering high-quality service and want to be part of a growing team, we want to hear from you. To Apply: Text your name, HVAC experience, and service area to: (470) 852-5611 (Text only, between 8 AM – 6 PM)

Job Description Are you a seasoned pro in property maintenance with a knack for organization? Do you take pride in transforming spaces into sparkling havens? If so, we want to hear from you! Vision Realty and Management is on the lookout for a passionate and skilled Senior Maintenance Tech to join our dynamic team full-time in the vibrant West Georgia and metro-Atlanta region! At Vision Realty and Management, we believe in creating a thriving work environment where your skills are valued and your efforts are rewarded. Enjoy competitive pay and an array of fantastic benefits that make our supportive team even more fulfilling. • Healthcare and 100% of the premium covered, • Two weeks of paid time off (PTO) annually, with the opportunity to earn more the longer you are with the company, • Four floating holidays, • Simple IRA WANT TO KNOW MORE ABOUT OUR REALTY AND PROPERTY MANAGEMENT COMANY? Founded on a journey of exploration and dedication, Vision Realty and Management has a rich history that began in 1975. What started as a simple venture blossomed into a thriving real estate company that is now an integral part of the West Georgia and metro-Atlanta region. With a profound commitment to excellence, we proudly oversee a diverse array of residential and commercial properties, striving to elevate tenant experiences and optimize property value. Our collaborative environment, diverse portfolio, and dedication to professional growth ensure that every day brings fresh challenges and rewarding experiences. When you join Vision Realty and Management, you become part of a legacy built on integrity, foresight, and enthusiasm. DO YOU MEET THESE QUALIFICATIONS? • Experience in plumbing, electrical, carpentry, and roofing, • Attentive to detail WHAT WILL YOU DO AS A SENIOR MAINTENANCE TECH? Your day as a Senior Maintenance Tech with our real estate and property management company starts with reviewing the work orders and planning your tasks. You begin by fixing a leaky pipe in one home, ensuring the plumbing is watertight and functional. Next, you move on to diagnosing an electrical issue-replacing a faulty outlet to restore power safely. Additionally, you repair a section of roofing damaged by weather, secure shingles, and check the gutters for blockages. Later, you may tackle some carpentry work, such as patching drywall or fixing a door that won't close properly. Every task focuses on maintaining and repairing existing homes, ensuring they're safe, functional, and comfortable for residents. READY TO APPLY AND ADVANCE YOUR CAREER? If you're ready to take on this exciting real estate and property maintenance challenge, don't hesitate to apply! The initial application process should take you less than 3 minutes to complete. We can't wait to hear from you! Job Posted by ApplicantPro

Job Description TIMEPROOFUSA was founded by some of the home remodeling industry's most respected leaders. We have quickly become America's fastest-growing home improvement company—providing roofing solutions to homeowners across the country. Our rapid growth is driven by one mission: to deliver uncompromising quality, dependable service, and lasting peace of mind to every customer we serve. We are seeking an experienced Roof Technician for residential roof repairs and roof rejuvenation work. This is a 1099 contractor position with consistent work opportunities and competitive pay. What You'll Do • Perform roof repairs (shingles, flashing, pipe boots, etc.), • Complete roof rejuvenation services, • Diagnose leaks and roofing issues, • Take before and after photos, • Top pay in the industry, • Flexible schedule, • Consistent year around work opportunities, • Roofing repair experience required, • Roof rejuvenation experience preferred, • Truck or van capable of safely transporting ladder, equipment and material, • Own basic roofing tools, • Must carry General Liability Insurance, • Dependable and professional About Us TIMEPROOFUSA is redefining the future of roofing. With fire-safe materials, sustainable technology, and a leadership team backed by decades of success in home remodeling, we're building smarter, safer homes that stand the test of time. Our core values—People First, Innovation, Customer Obsession, Integrity & Craftsmanship, and Profit Fuels Our Future—aren't just words on a wall. They drive how we build, lead, and win together. If you're the kind of person who thrives on challenge, takes pride in excellence, and wants to be part of a team that's changing the industry, this is your moment. Apply today, take the next step in your career, and let's build something extraordinary together.

Job Description Description Job Posting: Apartment Maintenance Technician / Punch-List Technician – 1099 Contractor Company: Superior Contracting & Maintenance Location: Local Technician – Atlanta, GA Are you an experienced professional looking for the flexibility to manage your own schedule and earnings, or interested in picking up additional work on the side? Do you take pride in delivering high-quality craftsmanship and excellent customer service? If so, we’d like to have you on our team. About Us Superior Contracting & Maintenance is a well-established home repair and maintenance company with over 13 years of industry experience. We serve a diverse client base and operate just north of our primary market in Atlanta, GA. We provide services across AL, AZ, GA, FL, NC, OK, SC, TN, and TX. Our scope of work includes plumbing, HVAC, electrical, carpentry, tree work, roofing, drywall repair, interior and exterior painting, flooring, remediation, make-readies, appliances, and more. Our mission is to deliver dependable, high-quality service while maintaining strong communication and long-term customer relationships. Our technicians typically work within their local areas, handling residential service calls. Our maintenance division primarily supports property management partners, while our direct-to-client services assist homeowners, and our projects team manages larger contracts and re-pipe initiatives. What We Offer • Fast Pay: Receive payment quickly for completed work, • Flexible Scheduling: Choose full-time or part-time hours (ideal for side work), • Variety of Work: Opportunities to handle a wide range of projects, both small and large Key Responsibilities • Perform repairs and installations across plumbing, HVAC, electrical, carpentry, appliances, and general handyman services, • Diagnose issues and provide efficient, practical solutions, • Adhere to local safety standards and regulatory requirements, • Maintain clear communication with the Superior team to ensure job completion and customer satisfaction, • Manage job timelines and budgets while upholding high standards of workmanship Requirements • Strong communication skills, professionalism, and a dependable, punctual work ethic, • Must own a truck, van, or SUV capable of transporting tools and materials, • Must have your own tools and be able to work independently, • Preferred: Minimum of 3+ years of experience in plumbing, HVAC, electrical, carpentry, or related trades, • Ability to lift and handle heavy tools and equipment, • Valid driver’s license and reliable transportation, • Ability to navigate and use an online portal system Disqualifiers / Mandatory Requirements • All HVAC technicians must have EPA certification to comply with new refrigerant regulations, • General Liability Insurance is required; COI must be provided, • W9 form with a valid Tax ID is required, • Completion of onboarding video training with a live vendor representative is required before receiving work orders Benefits • Fast Pay: Direct deposits are processed after proof of completion and quality verification, with no job board or service fees, • Flexible Schedule: Work Monday through Friday, with weekend opportunities available as needed If you are committed to providing top-quality service and are ready to join a growing team, we want to hear from you. To Apply Text (470) 852-5611 with your: • Name, • Brief work background We are hiring a limited number of qualified technicians, so apply as soon as possible. For additional information, please visit our website.

Job Description We are seeking a Welder Fabricator to become an integral part of our team! Perform a wide range of welding including MIG/ARC welding. Familiar with cutting pipe, building jigs, and prepping materials. Works from sales orders and/or verbal instructions in locating material and processing. Activities primarily consist of welding standard size gate frames, along with other miscellaneous welding as necessary. MUST KNOW HOW TO WELD GALVANIZED STEEL. 1.) Uses verbal or written instruction from work orders and collects materials for processing 2.) Cuts pipe using pipe cutting equipment 3.) Lays out pipe sections on a jig or table and welds with MIG/ARC welding equipment and techniques applies cold galvanizing solution to protect welds 4.) Performs visual inspection on completed work ensuring quality 6.) Maintains a clean and safe work area and can operate a forklift (optional) 7.) Performs other warehouse and gate fabrication duties as required Qualifications • 2-3 yrs. welding experience with MIG, ARC welding, • Able to lift/move heavy materials (up to 75lbs), • Ability to read, write and perform basic math functions, • Proficient in blueprint reading and execution from a plan, • Ability to perform own layouts using jigs, • Ability to work around heat and chemicals, • Must be able to work overtime as needed, • Multiple years of steel experience required, and can set up machines themselves, • Some aluminum experience preferred, but must at least show proficiency in a weld test, • Understands more complex blueprints, and can interpret welding symbols, • Confident they’re able to pass D1.1 and D1.2 certification tests within the first 90 days of employment, • Measurement reading down to 1/32” and can do the relevant mathCompany DescriptionFor over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial sedctor. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America on contract, contract-hire, and direct hire.For over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial sedctor. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America on contract, contract-hire, and direct hire.

Job DescriptionJob Summary The Production Welder is responsible for performing high-quality welding and fabrication tasks in a fast-paced shop environment. This role requires proficiency in multiple welding processes, the ability to accurately interpret technical drawings, and strict adherence to industry codes (such as AWS and ASME) and safety standards. The primary focus is on the efficient fabrication of piping spools, structural supports, and other components used in commercial, industrial, and high-tech mechanical systems. Key Responsibilities Welding and Fabrication • Perform Welding Operations: Execute various welding techniques, including but not limited to Shielded Metal Arc Welding (SMAW/Stick), Gas Metal Arc Welding (GMAW/MIG), Gas Tungsten Arc Welding (GTAW/TIG), and Flux-Cored Arc Welding (FCAW)., • Material Expertise: Weld a variety of materials, including carbon steel, stainless steel, and alloys, using appropriate procedures and filler metals., • Component Assembly: Fit, tack, and weld complex assemblies (e.g., pipe spools, equipment skids, structural frames) according to detailed specifications and dimensions., • Blueprint Interpretation: Read and accurately interpret blueprints, schematics, welding symbols, and written specifications to determine the proper layout and welding requirements., • Quality Control: Inspect finished welds to ensure they meet quality standards, tolerance requirements, and code specifications (e.g., penetration, bead size, structural integrity)., • Safety Compliance: Strictly adhere to all company and OSHA safety policies, including the use of required Personal Protective Equipment (PPE) and proper handling of hazardous materials and hot work, • Productivity: Maintain high levels of productivity and efficiency while ensuring the quality of work is not compromised., • Documentation: Complete required production logs, and time sheets accurately., • Collaboration: Work effectively with fitters, fabricators, and the shop management team to prioritize tasks and meet production deadlines. Required Qualifications Education and Experience • High School Diploma or GED required., • Completion of an accredited welding or fabrication vocational program is highly preferred., • Welding Proficiency: Demonstrated ability to perform high-quality welds in all positions (flat, horizontal, vertical, overhead)., • Certifications: Current or ability to pass welding qualification tests in relevant procedures (e.g., ASME Section IX for pipe, AWS D1.1 for structural steel). Experience with 6G pipe welding is a significant asset., • Technical Skills: Proficient in reading standard fabrication drawings, isometric drawings, and understanding Geometric Dimensioning and Tolerancing (GD&T) principles., • Math Skills: Strong basic mathematical skills necessary for measurement, calculation of material requirements, and layout., • Ability to stand, walk, crouch, and kneel for extended periods., • Ability to lift, push, and pull objects weighing up to 50 pounds frequently., • Manual dexterity required for manipulating welding torches, hand tools, and materials., • Vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR BIFycDLkG1

Job Description Job Description – MIG/TIG Welder Clyde Industries is the preeminent provider of highly engineered boiler efficiency/cleaning systems, spare parts and services for the global pulp & paper industry and a leader in providing equipment and aftermarket part solutions for industrial applications with a topflight team operating in North America, South America, Scandinavia and Indonesia. Clyde Industries has developed significant innovations in our core sootblower offering, encompassing mission critical technologies designed to remove residue and deposits that build up in recovery and power boilers (with such residue creating safety hazards, process efficiency reductions or complete boiler shutdown if not properly eliminated). Clyde Industries not only provides the equipment, but a host of related services and aftermarket assistance to support our customers’ operations, with a particular focus on and expertise in helping established and emerging pulp & paper customers. Clyde Industries is constantly innovating to expand its offerings with a focus on continuing to drive increased value for customers. As a global leader of highly engineered industrial applications and service provider of the highest caliber, Clyde Industries looks forward to building on its history of innovation and superior customer-centric solutions. Clyde Industries is actively hiring for a MIG/TIG Welder. We are seeking an experienced MIG/TIG Welder who has experience operating automatic welders. The candidate must be able to read and understand drawings and weld symbols. Candidate should have experience welding various diameters of pipe materials to include stainless steel. We are looking to hire someone with a service driven attitude that has the desire to learn, grow, and lead by example. This is currently a 2nd shift opening (1:30pm-10:00pm Monday thru Friday. Training will take place for an estimated 1 month with some hours potentially being on day shift from 7:00am-3:30pm Monday thru Friday. Once candidate is fully trained (at the discretion of the trainer) he or she will work on 2nd shift. At times there may be mandatory overtime required to meet production needs. This is a non-exempt position and our targeted hourly rate for the role is $18/hour to $24/hour and offers will be determined based on candidate’s experience. This position is Full Time with comprehensive health and wellness benefits and located at: 4015 Presidential Parkway Atlanta, GA 30340. Summary of Responsibilities (not comprehensive of all tasks): Follow welding procedures and maintain different qualifications for various types of weld joints. Use materials and fillers required for tube welds including dissimilar materials. All tube welders shall be qualified in accordance with ASME Section IX Products are installed in boilers which require special welding criteria to be accepted. Fits and welds assemblies using jigs and fixtures Follow all safe work practices and policies Verifies quality of work and signs off on quality checklists where required Qualifications 2 years welding technical school or equivalent 3 - 5 years of experience as a TIG welder in a manufacturing environment. Must be skilled in all facets of TIG, MIG, and stick welding Proficient at TIG welding including pipe welding Knowledge and ability to heat, form and straighten metal parts to restore alignment from distortion Ability to use precision measuring equipment to inspect dimensions and angles including calipers, micrometers, protractor, and other precision measuring devices Ability to identify any faults in operating equipment or in relation to materials Ability to control the fitting and welding process to avoid problems in relation to excessive distortion, expansion, or shrinkage of welded parts Ability to produce 100% penetration welds that are radio graph acceptable Ability to set up and operate semi-auto welding equipment Ability to fit up pipe/tube sections, flanges and nozzles and nozzle fabrications with accuracy Ability to select and set up welding equipment Ability to ensure welds meet standards and specifications Proficient at MIG welding Ability to use cutting equipment effectively and efficiently Ability to read and understand engineering drawings including weld symbols Proficient at grinding, filing, sanding, and deburring completed parts Math skills to include ability to add, subtract, multiply and divide in all units or measurement including fractions and decimals General Able to work shift hours as mentioned above and overtime as required. Physical Requirements: Must be able to stand for long periods of time. Must be able to lift 30 lbs Environmental Working Conditions: Work for this role is performed inside and outside in an industrial environment and is a very hot environment working around flame and gases. Disclaimer: Nothing in this job description restricts Management’s right to assign or reassign duties and responsibilities to this job at any time. Clyde Industries is an Equal Opportunity/ Affirmative Action employer and provides reasonable accommodation in its application process for qualified individuals with disabilities and disabled veterans. Job Type: Full-time Salary: $18.00 - $24.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Vision insurance Shift: 8 hour shift – 2nd shift (1:30 pm - 10:00 pm) Weekly day range: Monday to Friday Ability to commute/relocate: Atlanta, GA 30340: Reliably commute or planning to relocate before starting work (Required)

Job Description Certified Pipe Welders needed for shop and commercial project work near Augusta, Georgia area. You must have or be willing to obtain an OSHA 10. You will be required to TIG weld on stainless steel schedule 10 with solar flux and schedule 40 with argon backing up to 6 inches, You will be required to pass a 6" stainless SCH 10 in 6G position weld test that will be X-Ray'd. You must have your own tools of the trade. You will be required to pass a pre-employment drug screen and background check upon arrival. Paying up to $40/hr Per Diem: $145/ a day for days worked Duration: 10 months Hours: 48/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888-230-9908 Fax: 888-230-9909 Email: Company DescriptionWe believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Now Hiring: Skilled Combo Welders (Stick/TIG) United Trades of America is seeking experienced and highly skilled Combo Welders for projects in Georgia. This opportunity is ideal for welders who specialize in both Stick (SMAW) and TIG (GTAW) welding processes and are confident working on complex, high-code piping systems. About the Role This position requires a welder with expertise in the Master Combo Weld Test on 2" schedule 160 wall pipe, a critical qualification involving welding in the 6G position. The test covers welding with both Stick and TIG processes in accordance with stringent power piping codes B31.1 and B31.3 and includes X-ray inspection to ensure the highest quality welds. Due to the high cost and technical complexity of the testing process, candidates must be highly confident and seasoned in these skills. The successful candidate will perform pipe welding tasks on-site, working primarily with carbon steel pipe with thick walls (schedule 160). The role demands precision, attention to detail, and the ability to work under code requirements used in power plants, refineries, and industrial construction projects. Requirements * Onsite Weld Test: Must pass the Master Combo Welder Test on 2" schedule 160 wall pipe (Stick/TIG), including X-ray inspection, following B31.1 and B31.3 power piping codes. * Experience: Proven experience as a combo welder in industrial or heavy construction environments. * Skills: Proficiency welding in the 6G position, with both SMAW and GTAW processes. • need to be proficient with nickel based alloy welding Certifications: While the test serves as certification, additional welding certifications are a plus. * Background: Must pass drug screening and background check. Compensation & Benefits * Competitive hourly pay ranging from $28 to $34 based on experience. * Opportunity to work on high-profile projects with a reputable company. How to Apply If you are a qualified, detail-oriented Combo Welder ready for your next challenge, we want to hear from you! Apply by sending your resume directly to . Please include any relevant certifications and welding test results if available.

Estimator - Civil Construction - Quad Cities This Jobot Job is hosted by: Kelly Anne Wight Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $110,000 per year A bit about us: A leading provider of civil infrastructure solutions, our team specializes in building and improving roads, highways, underground utilities, and public works through comprehensive earthwork, concrete and asphalt paving, and underground pipe installation projects. With a focus on safety, quality, and community benefit, we deliver long-lasting results that improve transportation and support growing neighborhoods. Our experienced crews approach every project with professionalism and a commitment to excellence. Why join us? Becoming part of our organization means working alongside passionate experts in a dynamic field that shapes communities for generations. We offer competitive compensation, career growth opportunities, and a collaborative atmosphere where creativity and technical skill come together on challenging, impactful projects. Employees are encouraged to advance through mentorship, training, and exposure to a wide variety of civil construction tasks—making every workday rewarding and diverse. Job Details • Position: Estimator (Civil Highway Construction Group), • Responsibilities include gathering, analyzing, and preparing detailed cost estimates for bids on roadwork, paving, pipe installation, and earthmoving jobs., • Work includes reviewing plans, specifications, and site data; collaborating with project managers and subcontractors; estimating materials, labor, and equipment; and preparing written proposals and budgets., • Required: 3+ years of experience estimating highway/civil infrastructure, strong understanding of blueprint reading and civil sitework, excellent communication and negotiation skills, and ability to visit job sites as needed. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Ferguson - - Responsibilities: Weld outlets onto steel pipe to serve the fire sprinkler industry; Perform specialty welding tasks; spool pieces, flanges, etc.Inspects work for defects, dimensions, alignment, end preparations, and seam splits in pipe; Maintains a clean and safe welding station while

Job DescriptionWachter is seeking a motivated, solution-oriented Lead Journeyman Electrician for heavy commercial and industrial projects. You will act as the Foreman on-site, leading a team (typically 2 Licensed Electricians and 2 Apprentices) to deliver high-quality installations under tight deadlines. This is a long-term opportunity for a pro who can lead a crew while staying hands-on with complex electrical systems. What You'll Do: • Lead "heavy commercial" projects on industrial sites, managing teams of 4+ Electricians/Apprentices., • Perform diverse electrical tasks, from small pipe/wire to large-scale Generator and UPS installs., • Read and interpret blueprints, one-lines, and schematics., • Run/bend conduit and pull/terminate wire in varied environments., • Operate scissor, boom, and bucket lifts as needed., • Troubleshoot industrial controls, automation and PLCs. What We Are Looking For:, • Licensing: Valid Journeyman Electrician License is required., • Experience: Strong background in Industrial/Manufacturing systems (24v DC to 480v), • Leadership: Proven ability to run larger projects and hit "time crunch" deadlines, • Safety: OSHA 10 or 30 certification is a major plus, • Skills: Strong written and verbal communication; ability to work independently or as a team., • Flexibility: Must be willing to work up to 60 hours per week and travel nationwide. Benefits Package: Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D and LTD insurance, • Paid Vacation and Holidays, • Company- Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required

The responsibility of a Fire Sprinkler Technician is to successfully lay out, fabricate, assemble, install fires sprinkler systems, as well as maintain piping systems, fixtures, sprinklers and industrial processing systems.Install pipe systems and valves.Cut, thread, assemble and bond piping and tub

The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Must have a comprehensive knowledge of ship construction. Must have a thorough knowledge of experience with P-73 joint fit-up.

Floating Field Support Engineer. Floating Field Support Engineer - Immediate Hiring!. We are seeking a highly skilled and motivated Floating Field Support Engineer to join our team.

Job Description WE ARE LOOKING FOR A LEAD PLUMBING SERVICE TECHNICIAN WITH 5 YEARS MINIMUM EXPERIENCE. We are seeking a Plumbing Service Technician to join our team! The selected individual will perform Service Plumbing duties at Hartsfield Jackson Airport for various clients and restaurants, install and repair water supply lines and drainage systems including but not limited to cast iron sanitation systems and cast iron and stainless grease waste drains. Responsibilities: • Plumbing Service, • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures, • Maintain and repair commercial sewer systems, • Previous experience in plumbing, maintenance, and related fields, • Ability to read blueprints and schematics, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skillsCompany DescriptionPWH Mechanical, Inc. is in the business of building a family type work atmosphere including working closely with other team members. We concentrate on working around and inside Hartsfield Jackson Atlanta International Airport. We have been servicing the airline industry for more than 65 years going back to my grandfather and father's business started in 1959.PWH Mechanical, Inc. is in the business of building a family type work atmosphere including working closely with other team members. We concentrate on working around and inside Hartsfield Jackson Atlanta International Airport. We have been servicing the airline industry for more than 65 years going back to my grandfather and father's business started in 1959.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking a Commercial Refrigeration Pipefitter for construction and installation projects in and around the Atlanta, GA area. Role Summary: The Commercial Refrigeration Pipefitter is responsible for the installation, fabrication, and maintenance of refrigeration piping systems supporting commercial and supermarket refrigeration equipment. This role works closely with refrigeration technicians and construction teams to ensure piping systems are installed safely, efficiently, and in compliance with industry standards, mechanical codes, and manufacturer specifications. Roles and Responsibilities: • Install, align, measure, and secure refrigeration piping systems for new construction, remodels, and equipment replacements, • Fabricate and assemble copper, steel, and other refrigeration piping using brazing, soldering, threading, and welding techniques, • Lay out and route piping in coordination with refrigeration technicians, electricians, and other trades, • Install valves, fittings, hangers, supports, and insulation per project drawings and specifications, • Assist with pressure testing, evacuation, and charging of refrigeration systems, • Ensure all piping connections are leak-free and meet EPA, mechanical code, and company standards, • Support system start-ups and commissioning as needed, • Inspect piping systems for wear, corrosion, vibration, or damage, • Repair or replace defective piping, valves, fittings, insulation, and supports, • Respond to service calls involving piping failures or refrigerant leaks, • Maintain accurate documentation of materials, piping layouts, and refrigerant-related activities, • Follow OSHA, EPA, and company safety policies for refrigerants, hot work, ladders, and confined spaces Skills and Qualifications: • 3+ years of pipefitting experience in a commercial or industrial environment, • Strong brazing skills with copper and refrigeration-grade piping, • Working knowledge of commercial refrigeration systems including rack systems, condensers, and evaporators, • Ability to read and interpret blueprints, schematics, and piping diagrams, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently and as part of a team, • Valid driver’s license with the ability to travel to job sites Preferred Qualifications • Experience working in supermarket or commercial refrigeration environments, • EPA 608 Certification, • OSHA 10 or OSHA 30 certification, • Welding experience Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job Description Duininck is a fourth-generation, 100-year family-led company focused on building strong communities through our relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. Duininck Golf is a nationally recognized leader in golf course construction, specializing in renovations, restorations, re-models and new course development. Our mission is to build excellence guided by one standard: "Building the Best Golf." *Must be able to travel for extended periods of time across the United States. All team members must have reliable transportation to get to job sites. This seasonal, full-time position comes with a strong benefits package including: • Competitive pay range of $28 to $35 per hour, based on experience, • Paid Time Off, • Housing Fully Covered and other travel incentives, • Strong Health Plans to choose from, • Dental & Vision Plans, Company Paid Life insurance & Short-Term Disability, • Position specific personal protective equipment provided Key Responsibilities • Install and manage all irrigation control wires, communication cables, grounding, and conduit., • Read and interpret irrigation plans, wiring diagrams, and project specifications., • Perform accurate waterproof splicing, labeling, routing, and protection of all wires., • Identify and record station numbering and decode coding numbers for accurate system mapping and controller setup., • Lead and train a wiring crew while maintaining quality, productivity, and safety., • Coordinate daily with project managers, pipe crews, and other construction teams., • Test circuits for continuity, communication, grounding, and valve operation., • Troubleshoot and repair wiring issues quickly and effectively., • Ability to lift 50 lbs. regularly., • Ability to walk, bend, kneel, dig, and work on uneven ground for extended periods., • Comfortable working in outdoor construction environments., • Work will require extended hours, including Saturday. Required • Minimum 2–4 years of experience in irrigation wiring, electrical work, or related field., • Strong understanding of low-voltage irrigation systems, 2 wire systems and conventional control wire systems., • Ability to read and interpret construction drawings and wiring diagrams., • Experience leading a crew or supervising field staff., • Strong troubleshooting skills and attention to detail., • Experience with golf course irrigation installations (Rain Bird, Toro, or similar systems)., • Knowledge of trenching equipment, conduit installation, and wire-tracking tools. Duininck is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national origin, sex, age, disability, genetics, marital status, sexual orientation, gender identity, protected veteran status or citizenship status. If you would like more information on your EEO rights under the law, click here.

Job Description Plumb Works is an industry-leading home services company, we have been serving the greater metro Atlanta, GA area for over 30 years. We provide both residential and commercial plumbing services to an established customer base. Supporting the safety and good health of our customers, employees and community is our top priority. We are an active member of the State and National Association of Plumbing, Heating and Cooling Contractors (PHCC). Our Plumbing Service Technicians earn between $80,000 - 125,000 per year. We offer ongoing training, and, as we build-out our new underground division, there are numerous opportunities for growth! Oh, and we have Sundays off so you can have that 2nd cup of coffee and enjoy time with your family. As an experienced Plumbing Service Technician, you'll interact with our customers directly and solve a variety of plumbing problems. Our office staff can help you navigate more calls in a shorter period. This puts you in charge of your earnings potential. Responsibilities: • Provide consultation, including solutions, to resolve our customers' plumbing problems, • Identify issues related to broken plumbing systems (sewer lines, kitchen, and bathroom plumbing, drain cleaning, water heaters, water leaks, pipe services, water heaters, etc.), • Utilize your knowledge and understanding of existing infrastructure (in relation to electrical wiring, etc.), • Determine what needs to be repaired or replaced, and otherwise resolve customers' plumbing issues, • Install and maintain plumbing equipment, parts, and fixtures, • Utilize blueprints and drawings, so you must be able to understand plumbing layouts and plans, • Safely cut, assemble, and install pipes and other fittings Skills: • High school diploma or equivalent, • 3 years of successful plumbing experience to include an understanding of both residential and commercial water distribution and disposal systems, • Diploma or certificate from a trade school, or completion of an apprenticeship, • Ability to handle plumbing tools and equipment such as pipe wrenches, pipe cutters, etc., • Valid driver's license, • Familiarity with standard industry tools, concepts, practices, and procedures, • Good physical condition with the strength and flexibility to work in small or awkward spaces, • State plumbing license (Journeyman or Master preferred), • Availability to work a limited, after-hours on-call rotation, • Familiarity with Service Titan, or similar Customer Relationship Management (CRM) application This role in our company is best suited for those of you who: • Enjoy working with your hands, solving problems, and seeing the results of your efforts, • Feel rewarded when customers praise your skill and your work, • Like to set your sights on increased earnings potential and achieve it, • Have a positive attitude, • Successfully build relationships with customers, colleagues, and others, • Want to expand your career options and manage a team, become a trainer or consultant, or just be the expert in your field, • Appreciate being part of a diverse and enthusiastic team Benefits: • Sundays off! (Limited Monday - Saturday on-call schedule), • 401(k) + match, • Medical and Dental insurance, • Life insurance, • Short- and Long-Term Disability insurance, • Opportunities for advancement, • Paid Time Off (PTO), • Professional development, • Referral program, • Company phone, • Company-issued iPad, • Uniforms-save your nice clothes for the weekends!, • Company vehicle, • Tool purchase program Apply today and elevate your career with Plumb Works! Location: Atlanta, GA 30340

Job Description Job Title: Warehouse Manager Location: Atlanta, GA Industry: Industrial Products (Pipe, Valves, Fittings) Employment Type: Full-Time Position Overview: Our client is seeking a hands-on, organized, and customer-focused Warehouse Manager to join their team in Atlanta, GA. This key role will oversee daily warehouse operations, including managing deliveries, working the sales counter, and ensuring efficient order fulfillment. The ideal candidate will have experience in logistics and warehouse operations, and a background in pipe, valve, and fitting (PVF) products is highly preferred. The hours are 7:00 am to 4:00 pm, Monday through Friday. Key Responsibilities: · Route and schedule daily delivery trucks to ensure timely and efficient customer deliveries · Assist customers at the sales counter by accurately fulfilling and processing orders · Oversee warehouse organization, inventory control, and product placement · Operate a forklift to load/unload shipments and move inventory as needed · Maintain accurate records of shipments, deliveries, and inventory levels · Ensure compliance with safety standards and company procedures · Train and supervise warehouse staff as needed · Coordinate with sales and purchasing teams to align inventory with customer needs Qualifications: · 3+ years of experience in warehouse operations or logistics · Proven ability to manage delivery routing and scheduling · Strong customer service skills and experience in a counter sales role · Forklift certification or experience operating a forklift preferred · PVF (Pipe, Valve, and Fitting) product knowledge is a strong plus · High school diploma or equivalent; additional logistics or warehouse training is a plus · Ability to lift up to 50 lbs and work in a physically active environment · Basic computer skills and familiarity with inventory management systems Compensation & Benefits: · Competitive salary based on experience · Medical Benefits · Paid time off and holidays · Opportunities for advancement within a growing company

Job Description A trenchless sewer rehabilitation contractor serving Metro Atlanta seeks an experienced CIPP Foreman to supervise field crews installing cured-in-place pipe systems for residential and commercial projects. Lead daily operations including crew management, equipment coordination, liner installation, and quality control across hot water, steam, and UV curing methods. Work is primarily local across Atlanta, Roswell, Alpharetta, Johns Creek, Marietta, and Sandy Springs with occasional overnight projects. What We Offer – CIPP Foreman • Hourly pay: $35-40 per hour, non-exempt, • Stable local project work with possible overnight travel, • Lead, coach, and hold crew to safety and quality standards on trenchless rehabilitation projects, • Build daily work plans including manpower allocation, materials coordination, equipment readiness, and traffic control setup, • Run complete CIPP installations from bypass setup through liner handling, inversion/installation, curing process, and cool-down procedures, • Verify project specifications, take field measurements, and document production progress and safety compliance, • Coordinate with Superintendent and Project Manager on project risks, schedule delays, and change order requirements, • Operate and maintain specialized CIPP equipment including trucks, boilers, UV curing rigs, compressors, and generators, • Perform hands-on installation tasks when needed to support crew efficiency, • Complete daily reports covering time tracking, safety incidents, production metrics, and vehicle/equipment condition, • High school diploma or equivalent, • 2+ years experience as foreman or crew lead in CIPP installation or water/sewer utility construction, • Confined space entry capable with understanding of permit-required procedures and rescue protocols, • CDL (Class A or B preferred) or ability to obtain within 60 days; clean motor vehicle record per company policy, • Experience with steam or UV cure processes and quality assurance record-keeping, • Traffic control planning experience with flagger certification or ATSSA training, • Confined space attendant or supervisor certification, • OSHA 10 or OSHA 30 construction safety certification, • NASSCO ITCP-CIPP (Inspector Training Certification Program) or PACP certification, • Lift and carry equipment and materials weighing 50-75 lbs regularly, • Work in confined spaces including manholes and underground structures, • Stand, walk, bend, and kneel for extended periods during 8-12 hour shifts, • Work outdoors in all weather conditions including heat, cold, rain, and humidity, • Tolerate exposure to chemicals, resins, and styrene with proper PPE and ventilation controls #HP

Job Description Overview At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: from $25-30+/HR, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match, • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Responsibilities The Journeyman 1-Refrigeration is responsible for installation of refrigeration systems following customer specifications, applicable building code and proper piping practices. ESSENTIAL DUTIES AND RESPONSIBILITIES · Provides support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project. · Provides the required installation of pipe hangers as directed by the foreman. · Provides construction support by welding and slip hosing copper pipes, and assists the foreman as needed on the job. · Provides support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems. · Performs other duties as assigned. Qualifications Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · EPA Certification (Type II). Work Experience / Skills · 5+ years of experience in the construction industry preferred and hands on field experience in commercial refrigeration, electrical and/or fixtures construction. · Experience in copper brazing, market remodeling. · Good driving record. · Knowledge of electrical systems and ability to wire installations. · Knowledge of carpentry. · Knowledge of refrigeration systems and piping of refrigeration equipment. · Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment. · Knowledge of and ability to read blueprints on refrigeration, electrical and plumbing. · Ability to hang evaporation coils and install overhead hangers. · Ability to use hand and power tools and good mechanical skills. · Knowledge of jobsite safety, ability to oversee work activities to ensure safe work practices and safety rule compliance. · Ability to work with minimal supervision. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job typically operates in convenience stores, grocery stores, food service and/or construction environment with need to work at heights from ladders and/or Scissor lifts. Mechanical rooms can have elevated noise levels. The position regularly works near/with refrigeration/HVAC equipment that can expose the workers to extreme cold from refrigerant and high heat from brazing operations. This role routinely works in outside conditions that include inclement weather, heat and humidity, and exposure to dust. These conditions require employees to use the correct PPE and safe work practices. Physical Demands This position is very active and requires excellent stamina to perform strenuous physical labor under adverse field conditions. Employees are regularly required to walk and stand for long periods, hear, drive, sit, bend, kneel, stoop, crouch, crawl, climb, use hands and fingers, and lift and/or move up to 25 pounds, occasionally up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description McKenney’s, Inc. is seeking a licensed Structural Engineer to support our mechanical and plumbing operations. This role is embedded directly with project teams responsible for getting work built—requiring a strong appreciation for schedules, constructability, prioritization, and customer service. The successful candidate will apply sound engineering judgment to deliver safe, code‑compliant, and efficient structural solutions that enable successful installation of mechanical and plumbing systems. JOB SUMMARY The Structural Engineer (PE) will provide structural engineering services in support of mechanical and plumbing construction projects. This includes the design and review of pump skids, piping skids, equipment supports, pipe supports, seismic restraints, and wind restraint systems for mechanical equipment. The role works closely with internal operations teams, virtual construction, fabrication, and field personnel to ensure designs are practical, constructible, timely, and aligned with project schedules and customer commitments. DUTIES & ESSENTIAL JOB FUNCTIONS • Design and seal structural calculations and details for pump skids, piping skids, and packaged mechanical systems., • Engineer pipe support systems including gravity, lateral, seismic, and thermal considerations., • Design seismic restraint systems for ductwork, piping, plumbing, and mechanical equipment in accordance with applicable codes and standards., • Perform wind load analysis and design wind restraint systems for rooftop and exterior mechanical equipment., • Review delegated design submittals and shop drawings related to structural supports and restraints., • Ensure compliance with applicable building codes, seismic requirements, wind criteria, and referenced standards (IBC, ASCE 7, SMACNA, MSS, etc.)., • Provide timely engineering support to operations teams to maintain construction schedules and address field conditions., • Participate in coordination meetings with internal teams, general contractors, and other trades as required., • Perform site visits to validate existing conditions, review installations, and support issue resolution., • Clearly communicate engineering intent to non‑structural audiences including project managers, superintendents, fabricators, and installers., • Bachelor’s degree in Structural Engineering, Civil Engineering, or similar., • Registered Professional Engineer., • Minimum of 7–10 years of relevant structural engineering experience., • Experience supporting construction‑phase engineering within a design‑build or contractor‑led environment., • Working knowledge of mechanical and plumbing systems and how they are fabricated and installed., • Familiarity with seismic and wind restraint design for MEP systems., • Ability to work effectively in a fast‑paced environment with competing priorities., • Strong understanding of structural engineering principles as applied to MEP systems., • Excellent written and verbal communication skills., • Ability to translate engineering requirements into clear, practical direction for construction teams., • High level of organization with the ability to manage multiple priorities simultaneously., • Strong sense of urgency and accountability to schedules and commitments., • Customer‑focused mindset with appreciation for internal operations needs., • Professional demeanor and commitment to McKenney’s values and standards., • Self‑starter capable of working independently and collaboratively. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR eZwo79fNmL

Job Description A trenchless sewer rehabilitation contractor serving Metro Atlanta seeks an experienced CIPP Technician to assist with cured-in-place pipe liner installations and perform pipeline inspections. Operate CCTV inspection equipment, robotic tap cutting systems, and bypass pumping to support sewer and storm line rehabilitation projects. Work is primarily local across Atlanta, Roswell, Alpharetta, Johns Creek, Marietta, and Sandy Springs with occasional overnight projects. What We Offer – CIPP Technician • Hourly pay: $22-28 per hour, non-exempt, • Assist with CIPP liner preparation, handling, and installation for sewer and storm line rehabilitation projects, • Set up and operate bypass pumping systems to maintain flow during liner installation, • Perform CCTV pipeline inspections using push cameras and robotic equipment to assess line conditions, • Operate robotic tap cutting equipment to reinstate service laterals after CIPP installation, • Maintain equipment readiness through daily inspections, cleaning, and preventive maintenance, • Follow confined space entry procedures and chemical safety protocols for resin handling and ventilation, • Document inspection findings, production activities, and equipment condition in daily logs, • Assist foreman with traffic control, material handling, and site restoration tasks, • High school diploma or equivalent, • 1+ year experience in CIPP installation, trenchless pipe repair, or sewer utility work, • Confined space entry capable with ability to follow permit procedures and safety protocols, • Valid driver's license with clean driving record; CDL preferred but not required, • CCTV inspection experience with NASSCO PACP or LACP certification, • Experience with robotic cutting equipment and lateral reinstatement procedures, • Bypass pumping setup and operation experience, • OSHA 10 construction safety certification, • Flagger certification or traffic control training, • Lift and carry equipment and materials weighing 50-75 lbs regularly, • Work in confined spaces including manholes and underground structures, • Stand, walk, bend, and kneel for extended periods during 8-12 hour shifts, • Work outdoors in all weather conditions including heat, cold, rain, and humidity, • Tolerate exposure to chemicals, resins, and styrene with proper PPE and ventilation controls #HP

Job Description JOB SUMMARY As a McKenney’s Senior Professional Engineer, you will work in a team environment designing and developing commercial and industrial HVAC, piping, and plumbing systems. You will interface with clients, negotiate project scope, perform technical studies (due diligence, feasibility reports, etc.), and perform load calculations, energy simulations, and equipment selections. As a key contributor, you will manage and lead the design process with our Existing Building and New Construction business leaders to strengthen and grow our turnkey, design/build offers. Your efforts should result in value-driven designs that consistently and successfully address the challenges identified. This will yield satisfied customers, repeat business, and continued growth. DUTIES & ESSENTIAL JOB FUNCTIONS • Develop, negotiate, and maintain engineering scope for projects., • Work with the Operations Team to align construction budgets with engineering scope., • Perform and review detailed load calculations utilizing Trane Trace 700, Trace 3D Plus, and interpret the results., • Perform life-cycle cost analysis among system alternatives to determine the energy impacts of each and assist in system selection., • Ensure compliance of all designs with applicable codes, standards, and regulations., • Coordinate mechanical requirements with the architects and electrical, structural & civil engineers., • Review and produce written specifications and sequences of operation., • Identify and meet our commitments to the customer (owners, general contractors, etc.), design/construction team members (architects, electrical engineers, other trade contractors, etc.), and internal customers., • Assist in managing and developing corporate clients such as architects, developers, general contractors, and other consulting engineering firms., • Prioritize the workload to identify and complete critical path items on time consistent with the job schedule., • Develop HVAC documents including, but not limited to duct sizing & routing, air distribution selection, pipe sizing & routing., • Develop Plumbing documents, including but not limited to, sanitary and vent sizing, domestic cold water and hot water sizing, and pipe routings., • Perform job site inspections and field reports., • Effectively and personally organize your work team., • Bachelor’s degree in Engineering (Preferably Mechanical Engineering)., • Registered Professional Engineer, • A minimum of 7-10 years of experience in the commercial/industrial HVAC field., • Ability to convey technical requirements/systems in fundamental terms that non-technical clients can understand., • Understanding of costs of mechanical systems and installation., • Proficient with MS Office and a general understanding of AutoCAD, • Strong written and verbal communication skills., • Must have a professional appearance., • Ability to use time productively, maximize efficiency, and meet challenging work goals., • Ability to take on additional responsibilities as needed and determine and manage priorities with minimal guidance., • Must possess and maintain exceptional work ethic as well as uphold company values and demand the highest standard of conduct from self and others., • Must have basic PC experience in Windows environments, working knowledge of word processing, spreadsheets, e-mail, Web-enabled applications, and database software., • Work is normally performed in a typical interior/office environment., • No or limited exposure to physical risk., • No or limited physical effort is required., • Periodic visits to active job sites and exposure to conditions characteristic of such. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR U4Y1Q5OSmG

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety FabLogix is built on the principle of doing what we say we are going to do. Our execution strategy is powered by cutting-edge automation, seamlessly connecting digital drawings directly to our machines. Housed in a modern 150,000-square-foot facility, we are able to provide high throughput capacity to deliver on the most challenging schedules. FabLogix is part of Kelso Industries, with 3,500+ employees across 29 operating companies, delivers top HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a high-performing team. Learn more about us at Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Job Title: Mechanical Designer – Pipe Fabrication, Multi-trade Modular, Structural Steel Location: Duncan, SC or open to Hybrid remote Job Type: Full-time Job Summary: The Mechanical Designer is responsible for producing accurate, fabrication-ready pipe spool drawings to support industrial pipe fabrication operations. This role works closely with project management, estimating, quality, and shop operations to translate contract documents, 3D models, and field information into detailed spool drawings that drive safe, efficient, and predictable fabrication. The ideal candidate has direct experience working in a fabrication environment and understands constructability, weld sequencing, material control, and quality requirements associated with industrial piping systems. Key Responsibilities: • Develop detailed pipe spool drawings and fabrication packages from 3D models, isometrics, orthographic and contract documents, • Utilize Navisworks for model to extract spools per system., • Produce and modify 2D drawings using Spoolfab to support fabrication and shop needs, • Generate spool sheets including weld symbols, material callouts, dimensions, tolerances, and notes consistent with fabrication standards, • Coordinate with project managers, estimators, and shop supervision to ensure drawings align with priorities, schedule, fabrication sequence, and installation strategy, • Incorporate field conditions, RFIs, and redlines into revised drawings as required, • Support quality control efforts by ensuring drawings meet applicable codes, specifications, and internal standards, • Maintain organized drawing files and revision control in accordance with project and company procedures, • Participate in constructability reviews and prefabrication planning sessions, • 3+ years of experience as a mechanical designer or detailer in industrial piping, pipe fabrication, or structural fabrication, • Hands-on experience with Navisworks for model navigation, extraction and coordination, • Proficiency in AutoCAD for 2D drafting, • Strong understanding of pipe spool fabrication practices, including welding, fit-up, and shop workflows, • Ability to read and interpret P&IDs, isometric drawings, specifications, and project documents, • Working knowledge of piping materials, fittings, valves, and supports, • Strong attention to detail with a focus on accuracy and constructability, • Experience using Spoolfab for spool management and fabrication workflows, • Experience with Tekla Structures, particularly for coordination with structural steel or modular assemblies, • Familiarity with ASME piping codes (e.g., B31.1, B31.3), • Experience supporting modular or prefabricated piping assemblies, • Opportunity to work on complex industrial and capital projects, • Direct impact on fabrication efficiency, quality, and schedule performance, • Collaborative environment bridging engineering, fabrication, and construction, • Competitive compensation and benefits package, • Long-term growth opportunities within a fabrication-focused organization Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job DescriptionSalary: Commensurate on Experience Headquartered in Conyers, Georgia, Batchelor & Kimball takes pride in partnering with our clients to deliver excellent results from engineering and construction to operations and maintenance. Theres not a lot of BS here, and not a lot of turnover. Good people work at Batchelor & Kimball. Were good at our jobs, and good to each other. We have high expectations because the work is challenging, but we know the most valuable thing about the work is the people who do it. If this sounds like a good fit for you, wed like to meet you! Were looking for someone to support our QA/QC team in West Atlanta, GA. The ideal candidate will perform critical tasks. We will rely heavily on this person to maintain strict confidentiality and possess strong attention to detail skills and have desire to do non routine tasks. What Youll Do: • Deliver quality record development (hydro forms/civil forms etc.) for review and retention, • Maintain effective information storage systems to enable easy retrieval of QA/QC documents and data, • Support regular compilation and reporting of quality related QA/QC data for management reporting and review, • Maintenance of all records demonstrating full traceability of changes to construction documents, • Inputting data into software programs, and compiling data books for final turnover to clients, • Must be able to work independently while demonstrating strong qualities and integrity What youll need (minimum qualifications): • Strong computer application skills, • Minimum 3 years and above field experience with ability to read and interpret mechanical, structural & isometric drawings., • Plan and perform work activities independently, • Ability to prioritize, plan, perform and communicate activities in both written and verbal form., • Ability to manage multiple tasks with strong attention to detail., • Experience working with quality management systems involving ASME, AWS and AWWA mechanical codes., • Computer literacy applied to data management, collection, and reporting., • Valid drivers license., • Experience in Quality Control activities on assigned projects at construction sites performing Welding, HVAC, Plumbing services., • Knowledge pertaining to welding (pipe, structural), pressure testing (pneumatic, hydrostatic), coating (paint, plating) and torquing (bolts, flanges, valves), • Process paperwork regarding material testing/inspection and QA/QC for NDE, Insulation, Ducting services., • Working onsite at field locations Good to have: • Ability to work in a fast-paced construction environment, • Aptitude to learn new systems, • Ability to train staff on necessary operations, • Certification or extensive experience as a CWI, API, AI or NDE inspector. NOTE: This job description is not intended to be all-inclusive. The duties described may be changed or reassigned at the discretion of management, and the employee may be required to perform duties that are not listed in the job description. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #BandK #Onsite

Field Technician/Engineer Travel 80-85% in United States and in Canada Must have: 2-3 years installation, maintenance and repair experience with PVC Belling Machines, Swarfless Saws, Haul-Offs, Coilers, Packaging Machines, Pipe Bending, Slotting and Threading Machines. Necessary Experience: Desira

Job Description Job Title: Pipefitter Located in Newport News VA Job Description This role requires an experienced First Class Pipefitter with strong experience in marine, commercial nuclear, or petrochemical environments. You will interpret complex piping drawings and perform precise pipe fitting, fabrication, and installation work on a variety of materials to support shipyard and vessel operations. Responsibilities • Read and interpret ship piping drawings to plan and execute pipefitting tasks accurately., • Fit and install carbon steel, corrosion-resistant steel (CRES), and copper nickel piping systems to required specifications., • Perform end preparation of piping by hand and with appropriate machinery, such as specialized pipe preparation equipment., • Install and adjust pipe hangers to ensure proper support, alignment, and system integrity., • Use a ruler accurately in inches and tenths to measure, mark, and verify dimensions., • Prepare and fit backing rings to support welding and ensure proper joint configuration., • Clean cut and break pipe using a grinder while maintaining safety and quality standards., • Hand-prep V bevels on pipe ends to meet welding and fabrication requirements., • Fabricate various details and assemblies directly from drawings, ensuring adherence to specifications., • Bend pipe from templates and operate a hand bender to achieve precise angles and shapes., • Fit welded sockets accurately to ensure tight, secure, and properly aligned joints., • Fit brazed joints with or without inserts, following applicable procedures and quality requirements., • Work on Navy vessels and in shop environments, adapting to shipboard conditions and confined spaces as required., • Five (5) or more years of experience as a marine, commercial nuclear, or petrochemical First Class Pipefitter., • Ability to read and interpret ship piping drawings and blueprints., • Proficiency in fitting carbon steel, CRES, and copper nickel piping., • Ability to perform pipe end preparation by hand and with specialized pipe preparation machines., • Knowledge of installing and adjusting pipe hangers., • Ability to accurately read a ruler using inches and tenths., • Skill in prepping and fitting backing rings for welded joints., • Ability to clean cut and break pipe using a grinder., • Ability to hand prep V bevels on pipe ends., • Experience fabricating details and assemblies from drawings., • Ability to bend pipe from templates and operate a hand bender., • Ability to fit welded sockets and brazed joints with or without inserts., • Three (3) or more years of experience as a marine, commercial nuclear, or petrochemical First Class Pipefitter may be considered based on overall skill level., • Prior experience working in a shipyard environment., • Familiarity with Navy vessel systems and shipboard conditions., • Comfort working from detailed blueprints and technical drawings. You will work in a major, high-profile shipyard that offers exposure to complex, large-scale projects and advanced marine systems. The environment supports skill development and hands-on experience with a variety of piping materials and shipboard systems. Multiple shifts provide scheduling flexibility, and the scope of work offers steady, challenging assignments that can help you grow your career in the marine and industrial sectors. Work Environment The position is based in a large shipyard that extends over several miles in Southeast Virginia. Work takes place on Navy vessels and in shop environments, often in industrial and shipboard settings. Seasonal conditions include hot, humid summers and cool winters, and you will work both indoors and outdoors as required by the project. The operation runs three shifts—1st shift (7:00 a.m.–3:30 p.m.), 2nd shift (3:30 p.m.–11:00 p.m.), and 3rd shift (11:00 p.m.–7:00 a.m.)—and you must be able to work any shift as assigned, with shift availability subject to operational needs. The environment is industrial and safety-focused, with standard shipyard safety procedures, tools, and equipment used for pipefitting and fabrication work. Job Type & Location This is a Contract position based out of Atlanta, GA. Pay and Benefits The pay range for this position is $29.50 - $29.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Plumber Job Description: We are seeking a skilled and experienced Plumber to join our dynamic team. The ideal candidate will have a strong background in plumbing systems and be adept at troubleshooting, repairing, and installing a variety of plumbing structures. This role requires a detail-oriented individual who can work independently as well as collaborate effectively with team members. Key Responsibilities: • Install, repair, and maintain pipes, valves, fittings, drainage systems, and fixtures in commercial and residential structures., • Conduct thorough pipe inspections and perform leak detection efficiently., • Interpret blueprints and building specifications to map layout for pipes, drainage systems, and related materials., • Collaborate with contractors, construction workers, and other professionals on plumbing installations., • Conduct regular system maintenance on plumbing systems to ensure effective functionality., • Use a variety of tools and equipment safely and effectively., • Provide excellent customer service by addressing clients' questions and concerns with a professional demeanor., • Maintain accurate records of work performed and materials used., • Stay updated on local plumbing codes, standards, and regulations. Qualifications: • Proven experience as a plumber; a valid plumbing license is preferred., • Strong knowledge of plumbing systems, including installation, maintenance, and troubleshooting., • Ability to read and interpret blueprints and technical drawings., • Excellent problem-solving skills and a keen attention to detail., • Strong physical stamina and the ability to work in various environments and conditions., • Effective communication skills with the ability to explain complex information in a straightforward manner., • A valid driver’s license and reliable transportation. Why Join Us? • Competitive salary and benefits package., • Opportunities for professional growth and development., • A supportive and inclusive work environment., • A chance to work with a team of skilled professionals who are passionate about what they do. We would love to hear from you. Apply today and become a valuable part of our team!

Job Description We are seeking a Licensed Plumber to join our team! The selected individual will install and repair water supply lines and drainage systems. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures, • Maintain and repair septic and commercial sewer systems, • Prepare written work cost estimates for clients, • Previous experience in plumbing, maintenance, or other related field, • Ability to read blueprints and schematics, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skillsCompany DescriptionSaving Plumbing is a family owned, locally operated plumbing company committed to delivering high quality service with honesty, efficiency, and value. Our skilled team takes pride in their work and is dedicated to serving our community with professionalism and care. We strive to be the most trusted and reliable plumbing experts in the area, building lasting relationships with our customers through integrity and exceptional service.Saving Plumbing is a family owned, locally operated plumbing company committed to delivering high quality service with honesty, efficiency, and value. Our skilled team takes pride in their work and is dedicated to serving our community with professionalism and care. We strive to be the most trusted and reliable plumbing experts in the area, building lasting relationships with our customers through integrity and exceptional service.

Job Description Commercial Plumbing Company Looking for Plumbers Woodstock based Clarkeson Plumbing is currently growing in the metro Atlanta area, and is wanting to add a Plumber to our team. Exact pay will be commensurate with commercial plumbing experience, but will be in the $22 - $45 / hr range. There is high potential for professional growth. Please attach a copy of your resume with your response. Candidates must possess the following knowledge, skills, and abilities: KSA's: 1. Experienced in taking a commercial plumbing project from start to finish (i.e., underground, wall rough, overhead rough, fixture setting, punch list)., 2. Well versed in installation of all pipe systems (soldering, brazing, pro-press, mega press, threading, etc)., 3. Proficient in reading blueprints., 4. Ability to organize and lead a team of apprentices., 5. Ability to set fixtures precisely., 6. Ability to effectively communicate with, and represent the company favorably to onsite General Contractor personnel. Pre-employment drug screen and background check required. If we schedule an interview, and you're late to the interview, we are not a good fit. Interview location: Woodstock, GA 30189 Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance Work Location: In person Company DescriptionClarkeson Plumbing is a fast-growing commercial plumbing company where hard work pays off—offering competitive pay, steady hours, and strong earning potential on large-scale projects. Since 2011, they’ve built a reputation for quality and reliability, giving plumbers and tradespeople the chance to make great money while working on high-impact jobs in a team that values skill, hustle, and growth.Clarkeson Plumbing is a fast-growing commercial plumbing company where hard work pays off—offering competitive pay, steady hours, and strong earning potential on large-scale projects. Since 2011, they’ve built a reputation for quality and reliability, giving plumbers and tradespeople the chance to make great money while working on high-impact jobs in a team that values skill, hustle, and growth.

Job Description Ready to make waves as a Skilled Plumbing Technician extraordinaire? Plumb Works, the unrivaled powerhouse of home services in Atlanta, GA, is seeking passionate and experienced plumbing pros like you to join our superstar team! Get ready to dive into a career adventure where every day brings new challenges, incredible rewards, and a work environment that's second to none. With impressive pay, mind-blowing benefits, and boundless opportunities for growth, this is the plumbing gig of a lifetime! At Plumb Works, we believe that water is the pulse of life, and we're on a mission to keep it flowing flawlessly. Join us in our unwavering commitment to the safety, health, and happiness of our cherished customers. We're not just a company – we're a family that's dedicated to supporting each other and building a community we can all be proud of. Pay: $80,000 - 125,000 per year Benefits: • 401(k) + match, • Medical and dental insurance, • Life insurance, • Short- and long-term disability insurance, • Opportunities for advancement, • Paid time off (PTO), • Professional development, • Referral program, • Company phone, • Company-issued iPad, • Uniforms - save your nice clothes for the weekends!, • Company vehicle, • Tool purchase program Plumb Works has been servicing the metro Atlanta area for over 25 years. We offer a wide range of services to meet every commercial or residential need, large or small. Our company guarantees that any service we perform will be completed at the highest level in the industry. On the off chance that there is a problem with the craftsmanship, we will come back and resolve any problems at no charge! Everyone at Plumb Works is treated like family, from staff to clients and business associates. We believe that it takes honesty, integrity, and professionalism to offer the highest quality services. That's why we only hire the best and provide competitive pay, fantastic benefits, ongoing training, and numerous opportunities for growth! RESPONSIBILITIES FOR A SKILLED PLUMBING TECHNICIAN: • Provide consultation, including solutions, to resolve our customers' plumbing problems, • Identify issues related to broken systems sewer lines, kitchen, and bathroom, drain cleaning, water heaters, water leaks, pipe services, water heaters, etc., • Utilize your knowledge and understanding of existing infrastructure (in relation to electrical wiring, etc.), • Determine what needs to be repaired or replaced, and otherwise resolve customers' issues, • Install and maintain equipment, parts, and fixtures, • Utilize blueprints and drawings, so you must be able to understand layouts and plans, • Safely cut, assemble, and install pipes and other fittings REQUIREMENTS To join our league of plumbing superheroes, you'll need to bring: • High school diploma or equivalent, • 3 years of successful plumbing experience including an understanding of both residential and commercial water distribution and disposal systems, • Diploma or certificate from a trade school or completion of an apprenticeship, • Ability to handle plumbing tools and equipment such as pipe wrenches, pipe cutters, etc., • Valid driver's license, • Familiarity with standard industry tools, concepts, practices, and procedures, • Good physical condition with the strength and flexibility to work in small or awkward spaces, • State plumbing license (Journeyman or Master preferred), • Availability to work a limited, after-hours on-call rotation Picture yourself as the ultimate plumbing hero, blazing a trail through the vibrant streets of Atlanta, GA! As a Skilled Plumbing Technician at Plumb Works, you'll tackle exciting projects across the metro area, from sprawling residential neighborhoods to bustling commercial districts. The city is your canvas, and you'll leave a trail of satisfied customers in your wake. Plus, with Sundays off to recharge, indulge in your favorite hobbies, or simply kick back and revel in your plumbing triumphs, you'll achieve the work-life balance you've always dreamed of. Our dedicated office crew will have your back, ensuring you navigate the urban jungle like a true plumbing legend and maximize your earning potential along the way. DO YOU: • Enjoy working with your hands, solving problems, and seeing the results of your efforts?, • Feel rewarded when customers praise your skill and your work?, • Like to set your sights on increased earnings potential and achieve it?, • Have a positive attitude?, • Successfully build relationships with customers, colleagues, and others?, • Want to expand your career options and manage a team, become a trainer or consultant, or just be the expert in your field? The time has come to embark on an electrifying plumbing journey with Plumb Works! Seize this opportunity to showcase your skills and join our band of fearless plumbing warriors. Grab your trusty mobile device to access our lightning-fast, user-friendly initial application. Get ready to unleash your plumbing prowess and set sail on a thrilling career adventure with Plumb Works!

Job Description Ready to dive into an exciting plumbing adventure? Plumb Works, the go-to home services company in Atlanta, GA, is seeking experienced Lead Plumbing Service Technicians to join our tight-knit team! With over 30 years of industry-leading excellence, we've built a reputation for providing top-notch service to our loyal customers. Get ready to be rewarded with competitive pay, incredible benefits, and a career path filled with growth opportunities! At Plumb Works, we believe that water is life, and we're on a mission to keep it flowing smoothly. Join us in supporting the safety, good health, and happiness of our valued customers, while becoming an integral part of our dynamic community. Pay: $80,000 - 125,000 per year Benefits: • 401(k) + match, • Medical and dental insurance, • Life insurance, • Short- and long-term disability insurance, • Opportunities for advancement, • Paid time off (PTO), • Professional development, • Referral program, • Company phone, • Company-issued iPad, • Uniforms - save your nice clothes for the weekends!, • Company vehicle, • Tool purchase program, • Provide consultation, including solutions, to resolve our customers' plumbing problems, • Identify issues related to broken systems sewer lines, kitchen, and bathroom, drain cleaning, water heaters, water leaks, pipe services, water heaters, etc., • Utilize your knowledge and understanding of existing infrastructure (in relation to electrical wiring, etc.), • Determine what needs to be repaired or replaced, and otherwise resolve customers' issues, • Install and maintain equipment, parts, and fixtures, • Utilize blueprints and drawings, so you must be able to understand layouts and plans To embark on this plumbing adventure with us, you'll need: • High school diploma or equivalent, • 3 years of successful plumbing experience including an understanding of both residential and commercial water distribution and disposal systems, • Diploma or certificate from a trade school or completion of an apprenticeship, • Ability to handle plumbing tools and equipment such as pipe wrenches, pipe cutters, etc., • Valid driver's license, • Familiarity with standard industry tools, concepts, practices, and procedures, • Good physical condition with the strength and flexibility to work in small or awkward spaces, • State plumbing license (Journeyman or Master preferred), • Availability to work a limited, after-hours on-call rotation, • Familiarity with Service Titan, or similar Customer Relationship Management (CRM) application SCHEDULE AND LOCATION Picture yourself in the heart of Atlanta, GA, where the action never stops and the plumbing challenges keep you on your toes. As a Lead Plumbing Service Technician at Plumb Works, you'll roam the metro Atlanta area, making a real difference in the lives of our customers. Your schedule is set Wednesday through Saturday. With Sundays through Tuesdays off to sip your favorite brew and cherish time with loved ones, you'll enjoy a work-life balance that keeps you energized and inspired. Plus, our office crew has your back, helping you navigate the bustling city and maximize your earnings potential. WHAT WE'RE ALL ABOUT Plumb Works has been servicing the metro Atlanta area for over 25 years. We offer a wide range of services to meet every commercial or residential need, large or small. Our company guarantees that any service we perform will be completed at the highest level in the industry. On the off chance that there is a problem with the craftsmanship, we will come back and resolve any problems at no charge! Everyone at Plumb Works is treated like family, from staff to clients and business associates. We believe that it takes honesty, integrity, and professionalism to offer the highest quality services. That's why we only hire the best and provide competitive pay, fantastic benefits, ongoing training, and numerous opportunities for growth! DO YOU: • Enjoy working with your hands, solving problems, and seeing the results of your efforts?, • Feel rewarded when customers praise your skill and your work?, • Like to set your sights on increased earnings potential and achieve it?, • Have a positive attitude?, • Successfully build relationships with customers, colleagues, and others?, • Want to expand your career options and manage a team, become a trainer or consultant, or just be the expert in your field?, • Appreciates being part of a diverse and enthusiastic team? APPLY NOW! Are you ready to join the Plumb Works family and make a splash in the plumbing world? Don't let this opportunity slip away! Our application process is as quick and smooth as a perfectly installed pipe joint. In just 3 minutes, you'll be one step closer to joining our team. It's time to show us your plumbing prowess and set sail on an exciting career journey with Plumb Works! Candidates must successfully pass a background check, and we also conduct pre-employment drug testing. Please note that any job offer extended will be contingent upon the results of both background and drug testing.