Pms jobs in Edison, NJCreate job alerts

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Dominique or Text "MS3" to 904-541-9562 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 - $40.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Dominique or Text "MS3" to 904-541-9562 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 week ago (7/23/2025 4:46 PM) Requisition ID 2025-185110 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NJ-NEWARK | US-NJ-JERSEY CITY | US-NJ-ELIZABETH | US-NJ-PERTH AMBOY Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $40.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jason or Text "MS3" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 - $40.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "MS3" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 8 hours ago (8/27/2025 12:01 PM) Requisition ID 2025-187121 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NJ-NEWARK | US-NJ-JERSEY CITY | US-NJ-ELIZABETH | US-NJ-PERTH AMBOY Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $40.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jason or Text "Edison 4" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $40.00 - $44.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "Edison 4" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 2 hours ago (8/27/2025 5:32 PM) Requisition ID 2025-187155 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $40.00/Hr. Max Pay USD $44.00/Hr.

Job Description401K, Dental, Life, Medical, Vision Please be aware, this position is a skilled role, and must have prior experience in our or a related industry. This is NOT a forklift operator position. COMPETITIVE PAY ROOM FOR ADVANCEMENT Tri-Lift NJ has openings for entry level road mechanics. This is a great position for enthusiastic, motivated individuals interested in starting a career as a mechanic. The ideal candidate will have a familiarity with basic engine maintenance and a solid mechanical aptitude. A clean driving record is a must as you will drive a company van. You must possess your own tools. This is an opportunity for you to work alongside senior level technicians and start the path to becoming a full fledged Technician. The right attitude and a desire to succeed will create a bright future with our growing company. • Complete planned maintenance work on equipment at customer locations, • Perform routine preventive maintenance, • Perform PMs in a timely fashionQualifications:, • Previous experience in maintenance or other related fields, • Familiarity with maintenance tools and equipment, • Ability to handle physical workload, • Deadline and detail-oriented

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: Product Managers (PM) lead a cross-functional role for existing and new products. PMs are involved with all product management aspects associated with product definition, product development, forecasting, pricing, market introduction, sales tools, sales training and promotion plans. Serving as the primary marketing resource for supporting catalog product overall strategy and revenue goals in US. This ideal candidate will have a blend of skills including technical knowledge, stakeholder management, excellent project management, and strong communication. Please note that this position is based onsite in Piscataway, NJ. The estimated salary range is $80,000 - $100,000, based on experience. Responsibilities: • Promote product portfolio in North America and international regions, while working across product lines and workflows., • Coordinate promotional activities with product line managers and the sales teams., • General promotional assets, including landing pages, flyers, brochures, etc., • Execute promotional activities including sampling programs, advertisement, conference/tradeshow booking and/or attendance, product demonstrations, and customer presentations., • Demonstrate product expertise when attending conferences or tradeshows, • Categorize customer types and analyze effectiveness of territory performances based on client category, promotional activities and help execute improvement plan., • Analyze each portfolio in different territories, market needs and gather market information through surveys and client discussions to identify potential areas of growth or improvement., • Provide trainings, guidance and recommendations to Sales, Product Line Managers, R&D, and Production groups based on recognizing customers' current and future needs during continued business relationship., • Organize and provide training for customers, sales, and external distributors by delivering presentations or/and demos., • Collaborate with internal teams/departments to achieve sustainable growth, • Minimum bachelor degree in relevant life science disciplines, such as biology, protein chemistry, biochemistry, cell biology, immunology, molecular biology, biotechnology, etc., • Marketing experience highly preferred., • Exceptional verbal and written communication and presentation skills, • Must be customer-centered and proactive/action-oriented, • Excellent analytical skills & problem-solving skills, able to grasp new concepts quickly, • Strong organization skills with great attention to detail, • Enjoy working in a fast-paced and team-oriented environment, • Quick learner and well organized with good time managements and multitasking skills., • Solid business sense is a plus, • Must have basic computer skills in Microsoft Office #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Title: IT Technical Lead Reporting to: Head of US IT Delivery Group Job Location: Piscataway, NJ Compensation: The estimated salary range is $140,000 - $155,000, depending on the individuals experience and background Key Responsibilities • Lead the technical design and implementation of system-to-system integrations across internal platforms and third-party SaaS tools., • Act as a subject matter expert on RESTful APIs, data interfaces, system orchestration, and middleware platforms (e.g., Boomi, MuleSoft, custom APIs)., • Collaborate with business stakeholders, PMs, and external vendors to translate business needs into technical solutions., • Lead troubleshooting of complex issues in integration pipelines, ensuring timely resolution and root cause analysis., • Guide junior engineers and interface developers in coding best practices and architecture patterns., • Participate in the technical evaluation and onboarding of new SaaS platforms or core systems (ERP, MES, LIMS, CRM, etc.)., • Work with DBAs or directly manage database design, optimization, and data integrity practices (SQL/NoSQL)., • Establish documentation, standards, and governance for APIs, integrations, and system access., • Bachelor's or Master's degree in Computer Science, Information Systems, or a related field., • 10+ years of IT experience, with at least 5 years in a technical leadership role., • Solid hands-on experience with RESTful API design and integration across platforms., • Strong knowledge of database systems (e.g., SQL Server, PostgreSQL, MySQL, or NoSQL variants)., • Experience with API management tools and integration platforms (Postman, Swagger, Boomi, MuleSoft, etc.)., • Proficient in one or more programming/scripting languages (Python, Java, JavaScript, or .NET)., • Solid understanding of enterprise system architecture and data flow (ERP, CRM, Manufacturing Systems, etc.)., • Excellent communication skills to work across IT, business, and vendor teams., • Experience in GMP / Life Sciences / Manufacturing IT environment, • Familiarity with Identity & Access Management, SSO, OAuth 2.0, • Cloud integration experience (Azure, AWS, or GCP), • Knowledge of enterprise data models and data warehouse architecture #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description Diesel Mechanic , full time, for shop and field service of generators.to perform PMs, preventative maintenance, light repairs. Must have clean drivers record, willing to work weekends when needed. Knowledge of power electronics a plus (three phase power) We offer medical insurance, simple IRA, paid holidays, paid vacation. Salary based on experience. Please send resume to . Located in South Plainfield, NJ. Job Type: Full-time Expected hours: 40 per week

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Sr. Project Manager is a high-visibility, high-impact role for the BEUMER Group in North America responsible for leading and managing large scale Logistic Systems projects. This experienced Project Manager must possess well-developed people and project management skills and sound business judgment coupled with demonstrable record of success on medium to large scale projects, strong leadership/management skills and effective decision-making capabilities. Responsibilities • Develop and execute a project strategy that meets the project’s required performance, schedule, and profitability targets and work diligently to meet or exceed those targets., • Maintain customer focus. As the primary customer contact for BEUMER, maintain a positive relationship, understand the customer needs and challenges, and support development of solutions to meet those needs and challenges for the success of the customer and BEUMER., • Integrated part of the PM team (PM, SW PM, and Sub-PMs) who, as a team, are responsible for the fulfilment of the customer contract and (internal and external) commercial requirements., • Serve as Global PM, responsible for execution of the project scope locally and with our supporting Group Companies., • Lead a multi-disciplined project team throughout the complete project life cycle., • Develop and maintain detailed schedule and cost planning., • Manage key project management processes such as Scope management, Supply chain management, change management, Risk management, Claim Management, etc., • Coordinate and develop scope and price for change order opportunities. Negotiate acceptance with the customer., • Serve as a proactive leader/problem solver addressing complex issues and situations as they arise., • Solve multicomplex technical issues - and manage and direct multi-discipline, highly specialized design teams, working in cross border organizational networks (during the project execution phase.), • Active support of Procurement in creation and reviewing of detailed technical specification for sub-contract and supplier work packages., • Project risk management together with the PM team - identify and assess technical project risks, mitigate threats, and capitalize on opportunities., • Manage and enhance relationships with the Customer, Consultants, Suppliers and Trades., • Track project progress, variances, and recovery; identify trends; mitigate potential cost overruns and provide accurate revenue forecasts., • Ensure project health, safety and environmental standards meet or exceed legislated requirements and company policy., • Direct involvement in the specification approval, design, production, installation, and commissioning of project execution Requirements / Skills / Abilities • Bachelor's degree in Engineering, Construction Management, or similar technical field including PMP certification., • Overall minimum of 10 years progressive Project Management experience coupled with 5 to 10 years managing project $30,000,000+, • Experience with a variety of project delivery methods including Design-Build and Design-Bid-Build., • Able to travel to job sites, as required and in line with given project scope – on average 35% per year., • Essential skills include planning and budgeting, estimating, contract management, project administration, and decision-making / creative problem-solving skills., • Exceptional interpersonal and communication skills along with demonstrable leadership capabilities in creating unified and motivated project teams, • Work closely with team members and decision makers to identify, recommend, develop, implement, and support cost-effective project delivery., • Process oriented and able to implement project management processes based on Group Company and PMI standards., • Able to interface with all members of the organization in a professional, calm, helpful and courteous manner-including Senior Executive Management, Project Management, and external stakeholders., • Strong, independent decision-making ability. Self-starter and possess a strong work ethic with a self-imposed desire to exceed everyday expectations., • High degree of personal integrity and the ability to serve as a mentor to co-workers., • Direct industry experience (Logistic Systems) Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Technical Project Manager is an integral part of the project management team (PM, Software PM, and Sub-PMs) with broad knowledge of mechanical, electrical, and software engineering. The role involves taking ownership of the overall technical scope coordination and validation of the project (internal/external). This role will be supporting the Logistic Systems Division. Primary Responsibilities * Lead the technical design and integration process to meet the technical standards of BG and the customer contract, from contract signing to project closure. * Communicate and coordinate with the customer, stakeholders, and partners (e.g., suppliers, consultants) on the technical aspects of the project. * Define, plan, and monitor the simulation and testing of the system, ensuring that contractual obligations are fulfilled. * Work alongside the Project Manager to ensure transparent and open communication of technical and commercial points throughout the project. * Manage and coordinate the technical interface aspects of the project, including building interfaces with the client and external suppliers. * Share responsibility for cost management (including cost improvements), time, and quality of the project. Evaluate the technical and financial impact of decisions. * Collaborate with the procurement team to create and review detailed purchase orders, including technical specifications and scope of supply. * Co-manage the requirements management process, focusing on technical requirements, including gathering, mapping, and traceability with stakeholders. * Analyze requirements, define technical specifications, and assess the technical changes and their overall impact on both the project’s technical and financial aspects. * Lead the identification, assessment, and mitigation of technical project risks. * Review technical documents prior to submission to the customer for approval. * Co-manage gate/sub-gate meetings, ensuring the fulfillment of technical tasks and the collection of lessons learned related to technical aspects. * Co-manage the quality of final O&M (Operations & Maintenance) and training documentation to support customer needs. * Provide technical support to the site during installation, commissioning, and final testing. * Be directly involved in the specification approval, design, production, installation, and commissioning phases of project execution. Compensation range: $96,000.00 - $106,000.00 annually Qualifications • Bachelor's degree in Engineering or a related technical field, or equivalent practical experience., • A minimum of 10 years of combined experience in engineering, installation, commissioning, and testing of logistics or similar technology systems., • Proven ability to set and achieve goals, with a genuine care for others and a strong desire to contribute to a successful team., • Must be flexible and willing to travel to job sites as required, up to 50% of the time. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

TotalMed Staffing is seeking an experienced Registered Nurse First Assist Registered Nurse for an exciting Travel Nursing job in New Brunswick, NJ.Shift: 4x10 hr PMs Start Date: 09/08/2025 Duration: 13 weeks Pay: $3036.We find the right solution that meets your requirements for pay, benefits, employ

TotalMed Staffing is seeking an experienced Registered Nurse First Assist Registered Nurse for an exciting Travel Nursing job in New Brunswick, NJ.Shift: 4x10 hr PMs Start Date: 08/25/2025 Duration: 13 weeks Pay: $3036.We find the right solution that meets your requirements for pay, benefits, employ

Job DescriptionCompany Description MAKE GREAT PIZZA — AND MORE — POSSIBLE Be a part of the world's #1 Pizza company and watch your career grow! Job Description The supervisor oversees a team of drivers [Class A and B] delivering to Domino’s Pizza stores. The supervisor is responsible for scheduling drivers, routing trucks, reviewing trip sheets for accuracy, and ensuring compliance with DOT regulations, state, local laws, and company policies and programs. Effectively and efficiently handle customer complaints and concerns. Train new drivers in job duties, safely, and complete Job Safety Observations (JSO). The supervisor must be comfortable working in a diverse, fast-paced environment. RESPONSIBILITIES AND DUTIES Shift- Sunday- Thursday 3:00pm- Finish Compensation- 90k-100K (based off experience) 10% bonus Leadership: · Recruit, interview, select, and mentor new and tenured drivers · Support driver engagement initiatives · Monitor drivers performance and hold accountable when performance is below expectations, using coaching and/or progressive discipline, as needed · Complete driver’s annual performance reviews · Review driver’s lytx and logs and coach according to company · Collaborate in drivers onboarding and training · Ensure safe work environment in compliance with FMCSA, OSHA, company standards, local, state, and federal requirements · Effectively communicate day-to-day with drivers, departments and vendors · Create positive environment, morale and respect among team members · Attend and participate in classroom or virtual Leadership & Development trainings · Coordinate safety/team/quarterly meetings Reporting/Budget: · Prepare and assist with Transportation generated reports · Monitor budget and fuel cards to ensure funds are maximized · Participate in the development of budgets Routing, Scheduling, Hours of Service, and Maintenance: · Weekly schedule driver routes and re-routing as necessary to ensure route coverage · Conduct route analysis and recommend saving opportunities to Manager · Monitor driver hours of service via onboard system · Conduct route observations to ensure Drivers are safely performing their duties as required by company and DOT standards (The numbers of observations per period are determined by the number of drivers at the SCC) · Maintain and monitor food safety standards in compliance with company and franchisee requirements · Perform payroll duties when necessary and review driver payroll for accuracy · Monitor mis-deliveries, and make recommendations to Manager on avoidance strategies · Maintain driver qualification file · Schedule truck maintenance and maintain fleet image · Conduct accident investigations · Coordinate deliveries and backhauls activities · Assist the Transportation Manager with truck leasing meetings to ensure PMs are met to Domino’s standard and repairs are completed in a timely manner · Perform other duties as assigned by leadership · As needed, if qualified, drive company vehicle or straight truck for deliveries or to leasing company for service/maintenance, and on occasion work the yard Customer Relations: · Answer Slice of Pie complaints and keep leadership informed of findings · Maintain positive customer relationships · Customer Surveys Qualifications · High School Diploma, some college hours, 2-year degree preferred · 2-3 years of documented supervisory experience · 2-3 years route scheduling experience · Knowledge of Department of Transportation, FMSCA rules and regulations · MS Office, SAP, Transportation Management Systems (TMS), computers, and scanner equipment/software · Willingness to support a 24-hour operation, including carrying an emergency cell phone as needed · Results-oriented with strong organizational, decision making and people skills · Successfully pass a background check every third year on your anniversary date · Commercial Driver’s License Class A, a plus PHYSICAL REQUIREMENTS · Ability to stand and/or walk for extended periods of time, climb stairs, and lift to 25 lbs. frequently and 50 lbs. on occasion · Ability to bend, twist, reach, push, and pull throughout the shift · Ability to work in extreme temperatures (non-airconditioned warehouse), both indoors and outdoors, including refrigerated conditions [33-38] · Ability to work in environment with exposure to loud machinery · Must be able to work around yeast and flour Additional Information What you can expect from Domino’s: • Competitive pay, • Competitive benefits – Medical, Dental, & Vision on the first day of employment, • Company paid short term disability coverage, • Company paid Life Insurance, • 401k with company match up to 5%, • Paid Holiday and Vacations, • Professional and supportive management