Trabajos power systems engineer en Passaic, New JerseyCrear alertas

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description: Director of Engineering / Chief Engineer \n Company: Marine Electric Systems \nLocation: South Hackensack, NJ \nPosition Type: Full-Time \nSalary Range: $170,000–$210,000, depending on experience \nReports To: Executive Leadership / Ownership \n Position Summary \n Marine Electric Systems is seeking a hands-on Director of Engineering / Chief Engineer to lead and strengthen our engineering function as we continue expanding our defense manufacturing, repair, sustainment, and legacy product capabilities. \n This is a key leadership role for an experienced electrical engineering professional who enjoys solving practical manufacturing problems, supporting legacy defense products, mentoring younger engineers, and helping a growing company move faster. The ideal candidate will bring strong technical judgment, urgency, structure, and a willingness to work directly with engineering, production, sales, business development, procurement, quality, and leadership. \n This role is not purely administrative and is not purely R&D. It is a hands-on engineering leadership position focused on sustaining engineering, technical quote evaluation, production support, legacy product knowledge, reverse engineering support, and building a stronger engineering department for the future. \n About Marine Electric Systems \n Marine Electric Systems is a long-standing defense manufacturer supporting U.S. Navy and defense-related programs. Our work includes electromechanical assemblies, salinity cells, nuclear temperature detection panels, proximity switches, PCB-related work, electrical testing, wire harnesses, machined components, military-grade fasteners, repair work, and other legacy defense products. \n Many of our opportunities involve older systems, hard-to-source components, obsolete or discontinued products, legacy drawings, technical data packages, repair requirements, and sustainment needs where larger manufacturers may no longer provide support. We are looking for an engineering leader who can help us turn that opportunity into a faster, more disciplined, and more repeatable process. \n Key Responsibilities \n Engineering Leadership & Department Development \n\n • Lead the engineering function as a hands-on player-coach.\n, • Provide technical direction, prioritization, and accountability for engineering work.\n, • Mentor and develop junior engineers, including creating structured learning, review, and development plans.\n, • Build a more visible and organized engineering workflow, including task ownership, due dates, priorities, and bottleneck tracking.\n, • Help reduce dependency on individual tribal knowledge by documenting processes, product history, engineering decisions, and lessons learned.\n, • Work closely with leadership to identify future engineering staffing, equipment, software, and process needs.\n\n Technical Quote Evaluation & Business Development Support \n\n • Support Sales and Business Development by reviewing new opportunities, solicitations, drawings, specifications, and technical packages.\n, • Help determine quickly whether Marine Electric Systems can build, repair, reverse engineer, or support a product.\n, • Provide timely technical feedback to support bid/no-bid decisions, ideally within days rather than weeks wherever practical.\n, • Identify technical risks, missing information, component concerns, sourcing issues, test requirements, and engineering effort required for new quotes.\n, • Help establish a faster and more repeatable technical evaluation process for new business opportunities.\n, • Support the company’s goal of improving quote turnaround speed and increasing the volume of viable quotes submitted.\n\n Sustaining Engineering & Legacy Product Support \n\n • Support existing Navy and defense products, including legacy assemblies, electrical systems, test procedures, and production issues.\n, • Review and interpret legacy drawings, specifications, test procedures, technical data packages, and customer requirements.\n, • Troubleshoot PCB, electrical, electromechanical, power supply, and assembly-related issues.\n, • Support updates to engineering documentation, ECOs/ECNs, drawings, work instructions, and test procedures as needed.\n, • Provide production engineering support to help resolve issues quickly and keep work moving through the shop.\n, • Help preserve and organize legacy product knowledge so it can be used by future engineers, production staff, sales, and leadership.\n\n Reverse Engineering, Repair & Sustainment Growth \n\n • Support reverse engineering and repair-related opportunities involving obsolete or unsupported components.\n, • Help evaluate Form/Fit/Function replacement opportunities, component substitutions, and obsolescence challenges.\n, • Support SAR/source approval efforts and related technical documentation where applicable.\n, • Work with Sales, Business Development, Procurement, Quality, and Production to evaluate repair, rebuild, and sustainment opportunities.\n, • Help build repeatable methods for assessing whether Marine Electric Systems should pursue legacy product, repair, or obsolete-component opportunities.\n\n Cross-Functional Collaboration \n\n • Work closely with Production, Quality, Procurement, Sales, Business Development, and executive leadership.\n, • Communicate technical issues clearly to both technical and non-technical stakeholders.\n, • Help ensure engineering input is available early enough to support quoting, scheduling, purchasing, and production planning.\n, • Create a culture of urgency, accountability, documentation, and practical problem-solving within engineering.\n, • Collaborate with legacy employees and long-tenured personnel while helping transition knowledge into repeatable systems.\n\n Required Qualifications \n\n • Bachelor’s degree in Electrical Engineering or a closely related engineering discipline.\n, • Significant experience in electrical engineering, sustaining engineering, production engineering, test engineering, or engineering leadership in a manufacturing environment.\n, • Strong hands-on technical knowledge of electrical and electromechanical systems.\n, • Experience with PCB troubleshooting, electrical testing, components, assemblies, and production support.\n, • Ability to read and interpret drawings, schematics, specifications, technical data packages, and test procedures.\n, • Experience supporting manufacturing, production, repair, or sustainment work.\n, • Ability to make practical engineering decisions with imperfect information.\n, • Strong communication skills and ability to work cross-functionally with production, quality, procurement, sales, and leadership.\n, • Demonstrated ability to mentor junior engineers or technical staff.\n, • Strong organizational skills and ability to create structure in a fast-moving small-company environment.\n\n Preferred Qualifications \n\n • Experience in defense, aerospace, Navy, maritime, or high-reliability electronics manufacturing.\n, • Experience with legacy systems, sustaining engineering, obsolete components, or repair/rebuild programs.\n, • Experience with power supplies, sensors, wire harnesses, electromechanical assemblies, PCB assembly, SMT, through-hole components, or test fixtures.\n, • Experience with ESD requirements, military specifications, quality-driven manufacturing, and controlled production environments.\n, • Experience supporting technical quote evaluations, bid/no-bid decisions, or customer technical reviews.\n, • Experience with reverse engineering, component substitution, Form/Fit/Function replacements, SAR/source approval packages, or similar sustainment efforts.\n, • Familiarity with ERP systems, ECO/ECN processes, document control, engineering task tracking, and structured engineering workflows.\n, • Mechanical aptitude, including ability to understand mechanical drawings, tolerances, materials, and machined components.\n\n Ideal Candidate Profile \n The ideal candidate is a practical, hands-on engineering leader who is comfortable working in a small defense manufacturing environment. This person should be technically strong enough to solve problems directly, organized enough to build structure, and patient enough to mentor junior engineers while still creating urgency and accountability. \n This person should be comfortable with legacy products, old drawings, incomplete information, production issues, technical quote reviews, and the need to move quickly. The right candidate will not be overly academic or theoretical. They will enjoy getting into the details, helping the team make decisions, and building a stronger engineering function that supports company growth. \n First 90 Days — Expected Focus \n During the first 90 days, the Director of Engineering / Chief Engineer will be expected to: \n\n • Learn Marine Electric Systems’ core products, legacy systems, capabilities, and engineering bottlenecks.\n, • Establish a visible engineering task board or equivalent tracking system.\n, • Create clearer priorities for quote evaluations, production support, engineering changes, and technical reviews.\n, • Begin mentoring junior engineers through regular technical review and development.\n, • Start documenting critical legacy product knowledge and recurring technical issues.\n, • Improve engineering response time to Sales and Business Development for new opportunity evaluations.\n, • Identify major engineering capacity gaps, process gaps, and documentation needs.\n, • Build working relationships with production, procurement, quality, sales, and leadership.\n\n Long-Term Success Measures \n Success in this role will be measured by the ability to: \n\n • Improve technical quote evaluation speed and responsiveness.\n, • Reduce engineering bottlenecks that delay new business opportunities.\n, • Strengthen junior engineering capability and independence.\n, • Reduce dependency on tribal knowledge held by individual employees.\n, • Improve production engineering support and issue resolution.\n, • Support repair, reverse engineering, SAR/source approval, and sustainment growth initiatives.\n, • Build a more organized, accountable, and scalable engineering department.\n, • Help Marine Electric Systems turn engineering into a stronger enabler of business growth.\n\n Compensation \n Marine Electric Systems offers a competitive compensation package, including: \n\n • Base salary range of $170,000–$210,000, depending on experience.\n, • Potential performance-based bonus opportunity.\n, • Health, dental, and vision insurance.\n, • 401(k) with company match.\n, • Paid time off and company holidays.\n\n Work Environment \n This is a hands-on leadership role in a small but growing defense manufacturing environment. The successful candidate should expect to spend meaningful time on the production floor, in engineering reviews, in technical documentation, and in cross-functional discussions with team members across the company. \n Marine Electric Systems is looking for someone who wants to build, improve, mentor, and make a measurable impact.

Sr. Electrical Engineer Location: Jersey City, NJ (Hybrid – 4 Days Onsite, 1 Day Remote) Duration: Long-Term Contract (Minimum 2 Years) We are seeking an experienced Sr. Electrical Engineer to support the design and delivery of infrastructure, facility, and power system projects. This role will be responsible for developing electrical designs, preparing construction documents, and supporting projects through planning, design, and construction phases. Responsibilities • Develop conceptual, preliminary, final, and construction-stage electrical designs., • Design power distribution, emergency power, grounding, lighting, and fire alarm systems., • Prepare one-line diagrams, riser diagrams, wiring diagrams, and construction drawings., • Perform electrical calculations including load studies, equipment sizing, voltage drop, conduit sizing, short circuit, coordination, and arc flash studies., • Support medium-voltage infrastructure and substation design projects., • Prepare technical specifications, reports, and cost estimates., • Coordinate with multidisciplinary engineering teams and project stakeholders., • Review contractor submittals and respond to RFIs during construction., • Support utility coordination efforts with service providers for new and upgraded electrical services. Required Qualifications • Bachelor's Degree in Electrical Engineering from an ABET-accredited university., • 7+ years of electrical design engineering experience., • Proficiency with AutoCAD; REVIT/BIM experience is a plus., • Experience with power distribution, UPS, generators, grounding, fire alarm, and lighting systems., • Strong knowledge of electrical calculations and power system studies., • Experience preparing construction documents, specifications, and estimates., • Excellent communication and coordination skills., • Valid driver's license. Preferred Experience • Medium-voltage systems and substation design., • SCADA and Building Automation Management & Control Systems (BAMCS)., • EV charging infrastructure and solar power installations., • LED lighting conversion projects., • Transportation, airport, utility, or large infrastructure projects. If you have a strong background in electrical design and infrastructure projects and are looking for a long-term opportunity, we'd love to hear from you.

Description Are you excited about building software solutions around large, complex Machine Learning (ML) and Artificial Intelligence (AI) systems? Want to help the largest global enterprises derive business value through the adoption and automation of Generative AI (GenAI)? Excited by using massive amounts of disparate data to develop AI/ML models? Eager to learn to apply AI/ML to a diverse array of enterprise use? Thrilled to be a key part of Amazon, who has been investing in Machine Learning for decades - pioneering and shaping the world's AI technology? The Amazon Web Services Professional Services (ProServe) team is seeking a skilled ML Engineer to join our team as a Delivery Consultant at Amazon Web Services (AWS). In this role, you'll work closely with customers to design, implement, and manage AWS AI/ML and GenAI solutions that meet their technical requirements and business objectives. You'll be a key player in driving customer success through their cloud journey, providing technical expertise and best practices throughout the ML project lifecycle. Possessing a deep understanding of AWS products and services, as a Delivery Consultant you will be proficient in architecting complex, scalable, and secure AI/ML and GenAI solutions tailored to meet the specific needs of each customer. You'll work closely with stakeholders to gather requirements, assess current infrastructure, and propose effective migration strategies to AWS. As trusted advisors to our customers, providing guidance on industry trends, emerging technologies, and innovative solutions, you will be responsible for leading the implementation process, ensuring adherence to best practices, optimizing performance, and managing risks throughout the project. The AWS Professional Services organization is a global team of experts that help customers realize their desired business outcomes when using the AWS Cloud. We work together with customer teams and the AWS Partner Network (APN) to execute enterprise cloud computing initiatives. Our team provides assistance through a collection of offerings which help customers achieve specific outcomes related to enterprise cloud adoption. We also deliver focused guidance through our global specialty practices, which cover a variety of solutions, technologies, and industries. Key job responsibilities Key job responsibilities As an experienced technology professional, you will be responsible for: 1. Implementing end-to-end AI/ML and GenAI projects, from understanding business needs to data preparation, model development, deployment and monitoring 2. Designing and implementing machine learning pipelines that support high-performance, reliable, scalable, and secure ML workloads 3. Designing scalable ML solutions and operations (MLOps) using AWS services and leveraging GenAI solutions when applicable 4. Collaborating with cross-functional teams (Applied Science, DevOps, Data Engineering, Cloud Infrastructure, Applications) to prepare, analyze, and operationalize data and AI/ML models 5. Serving as a trusted advisor to customers on AI/ML and GenAI solutions and cloud architectures 6. Sharing knowledge and best practices within the organization through mentoring, training, publication, and creating reusable artifacts 7. Ensuring solutions meet industry standards and supporting customers in advancing their AI/ML, GenAI, and cloud adoption strategies This is a customer-facing role with potential travel to customer sites as needed. About the team Diverse Experiences AWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Why AWS? Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship & Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Basic Qualifications - Experience with AI/ML technologies - 3+ years of building machine learning and generative AI models for business application experience - 3+ years of customer-facing work, engaging with customer executives, technologists or partners to solve business problems with advanced technologies experience - Experience with cloud services related to machine learning (e.g., Amazon SageMaker) and generative AI applications - 3+ years of coding, data querying languages (e.g. SQL), and scripting languages (e.g. Python) Preferred Qualifications - Knowledge of AWS services including compute, storage, networking, security, databases, machine learning, and serverless technologies - Knowledge of AWS services including SageMaker, Bedrock, EC2, ECS, EKS, OpenSearch and AWS certifications - 2+ years of experience with design, deployment, and evaluation of AI agents and orchestration approaches; experience with open source frameworks like LangChain, LangGraph, LlamaIndex, and/ or similar tools - 3+ years of deep learning, computer vision, human robotic interaction, algorithms implementation experience using PyTorch or TensorFlow - Experience building ML pipelines with MLOps best practices, including: data preprocessing, distributed & GPU training, model deployment, monitoring, and retraining; experience with container and CI/CD pipelines - Domain expertise in healthcare and life sciences Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits . USA, GA, Atlanta - 131,300.00 - 177,600.00 USD annually USA, IL, Chicago - 131,300.00 - 177,600.00 USD annually USA, NJ, Jersey City - 144,500.00 - 195,400.00 USD annually USA, NY, New York - 144,500.00 - 195,400.00 USD annually USA, TX, Austin - 131,300.00 - 177,600.00 USD annually USA, TX, Dallas - 131,300.00 - 177,600.00 USD annually USA, TX, Houston - 131,300.00 - 177,600.00 USD annually USA, VA, Arlington - 131,300.00 - 177,600.00 USD annually USA, VA, Herndon - 131,300.00 - 177,600.00 USD annually USA, WA, Seattle - 131,300.00 - 177,600.00 USD annually

career forwards? 'Transport' yourself to GXO and find out more about how we do logistics differently! Here at GXO we are looking for a Transport Operations Manager to work at our Currys site in Newark. Working in a fast-paced Transport department for our leading high street retailer customer, you will experience a blend of first line operational tasks and hands on project involvement. Ensuring compliance of companies O-Licence obligations are met and ensure all customer expectations are met both internally and externally. The role is being offered on a full-time, permanent basis. You will be working Sunday to Thursday, 07:00-16:00, although some flexibility will be required- this is logistics after all! Pay, benefits and more: We are offering a salary of up to £43,000.00 with 25 days annual leave (plus bank holidays). Your benefits package includes a company-sponsored pension scheme, private medical & dental insurance, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You'll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! What you'll do on a typical day: Provide leadership to direct reports and ensure all operational procedures and processes are adhered to ensuring the effective flow of goods into, through and out of, the site, with safe onward transportation to their final point of delivery Responsible for managing change positively and effectively by proactively managing operational planning and changing customer requirements Ensure a customer focused approach whilst being responsive to customer requirements with consistent excellence in customer relationship management by improving the service offered To ensure that the transport function is legally compliant by ensuring correct compliance processes are in place, and monitored within the O-licence regulations What you need to succeed at GXO: Proven experience in a leadership role within the transportation or logistics industry Strong customer facing experience within a fast-paced environment Strong knowledge of transportation operations, safety regulations, and legal compliance Good Microsoft Office knowledge, in particular Excel and Power BI, with a sound knowledge of transport management systems i.e., Microlise, Tachomaster, Paragon * Problem solving skills and the ability to manage challenge We engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement here.

Title: Senior Transportation Engineer Department: Civil & Environmental Engineering Reports To: Department Chair, Civil and Environmental Engineering Position Type: Staff Position Summary: Under the supervision of the Chair of the Department of Civil and Environmental Engineering, the Senior Transportation Engineer works with faculty and other research staff on complex transportation planning analysis tasks related to sponsored research projects, focusing on transportation data development and analysis, use of regional travel demand, traffic and simulation models, and ITS engineering. Under the direction of the Department Chair and Principal Investigators on research projects, the Senior Transportation Engineer participates in a variety of research activities, including performing technical analysis work, preparing documentation, assisting with technology transfer activities, and participating in communication with clients. Duties also include needs assessment, implementation and support for research tasks to which the incumbent is assigned. Essential Functions: Manages one or more tasks for sponsored research projects. The incumbent will focus on areas of transportation modeling and systems analysis, traffic engineering, ITS, and transit systems operations. The incumbent will utilize and apply travel demand modeling, traffic engineering and simulation, GIS, and other transportation and mathematical modeling and analysis software. Keeps up with the state-of-the-practice in transportation modeling, traffic engineering and operations, and ITS, including innovations in related software tools. Implements this knowledge in research activities. (55%) Performs (as assigned) literature review, problem identification, data collection and analysis, analysis of solutions, and development of recommendations. Works with faculty, research staff, and students on preparing technical scopes of work for research projects, and assists the Principal Investigators with developing project schedules. Assists faculty and other researchers with managing all aspects of the technical work in the areas of transportation modeling and systems analysis, traffic engineering and ITS, including the scheduling and assignment of work tasks. (30%) Prepares technical memoranda and progress reports summarizing the results of the technical work. The incumbent will also be responsible for preparing sections of the Final Report documents related to the work tasks performed as part of research projects, including printed and electronic data and reports for submission and presentation to research clients. The Senior Transportation Engineer will attend meetings as necessary with NJIT faculty and staff, as well as meetings with research clients. In coordination with faculty prepares and sends for publication research reports and papers related to conducted research. (10%) Additional Functions: Assists faculty with graduate student guidance and mentoring by providing expertise and advice in the areas of transportation modeling, engineering, ITS, and data analysis. (5%) Performs other related duties as assigned by the Chair of the Department of Civil and Environmental Engineering or Principal Investigators on research projects. Prerequisite Qualifications: Master's degree in Transportation, Urban Planning, or a related field. Three years related experience in the computer based transportation modeling, simulation, and systems analysis. Working knowledge of regional and local transportation planning and engineering practices in New Jersey, as well as basic transportation engineering theory and practices nationwide. Working experience in computer based traffic analysis, preferable using Synchro. Working experience in computer-based transportation modeling (Cube, TransCAD, or VISUM) and simulation (Paramics, VISSIM, or CORSIM). Must have a strong computer background, including high-level proficiency with Microsoft Windows and Office software, including Word, Excel, Power Point, Access, and Visio. Knowledge and working experience using data analysis tools such as New Jersey Congestion Management System (NJCMS), New Jersey Accident Record Database (NJARD), and Census Transportation Planning Package (CTPP). Must have excellent oral and written communication skills At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position Preferred Qualifications: * Experience with ITS engineering and systems analysis is preferred. Bargaining Unit: PSA Salary Information: In compliance with the NJ Pay Transparency Law, the negotiated annual salary range for this position is $63,129.05-$113,324.04 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. To learn more about the comprehensive benefits NJIT offers for this position, please visit our benefits page https://hr.njit.edu/health-benefits. Range/Band: 22 FLSA: Exempt Full-Time

Mission The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. About SIMBA Voice Agents by Speechify SIMBA lets companies deploy natural, human-sounding AI voice agents in 71+ languages with sub-second latency. We're growing fast and need the systems to match — which means building the outbound engine, sales infrastructure, and automation stack that fills pipeline and keeps it moving. About the Role We're hiring our first GTM Engineer for SIMBA. You'll build and own the technical systems that power our outbound motion — from lead enrichment and sequencing to CRM architecture and AI-powered personalization at scale. This is purely an infrastructure and systems role. You'll be the person behind the scenes making sure the right prospects get the right message at the right time, and that the Sales team has the tooling and data to close. If you've built outbound systems from scratch, live inside Clay and Apollo, and measure your work in pipeline influenced — read on. What You'll Do • Build and maintain SIMBA's outbound infrastructure — lead sourcing, enrichment pipelines, scoring models, and sequencing workflows that run at scale, • Own the GTM tech stack end-to-end: CRM (HubSpot/Salesforce), enrichment (Clay, Apollo, Clearbit), sequencing (Outreach, Instantly), and the glue between them, • Deploy AI agents for automated prospect research, personalized outreach generation, and follow-up workflows — reducing manual work for the Sales team, • Instrument the full top-of-funnel: track what's working, cut what isn't, and continuously optimize for meetings booked and pipeline created, • Build integrations and automations via APIs, webhooks, and tools like Zapier/Make to keep data clean and systems in sync, • Evaluate and adopt new AI and GTM tooling rapidly — be the team's resident expert on what's emerging and what's worth building on What We're Looking For • Solid experience in GTM engineering, growth engineering, or RevOps role with a heavy technical lean, • You've personally built outbound systems from scratch — enrichment pipelines, multi-step sequences, lead scoring — not just managed existing ones, • Deep hands-on experience with the modern GTM stack: Clay, Apollo, HubSpot or Salesforce, Outreach or Instantly, Zapier/Make, Webhooks, REST APIs, • You think in funnels and measure everything — pipeline influenced, reply rates, meeting conversion, and cost per opportunity are metrics you track obsessively, • You ship fast, keep things simple, and don't wait for permission Nice to Have • Experience building GTM systems for an AI, voice, or developer-tools product, • Familiarity with contact center, CX, or telephony buyer personas, • Background at a B2C company that also runs a B2B or API sales motion Why Speechify SIMBA Build a product that genuinely impresses prospects — sub-second latency and 71+ languages speaks for itself. You'll have high ownership with direct input on GTM strategy, work alongside a team that stays embedded with customers, and operate in a fast-moving environment where your systems have outsized impact. The United States Salary range for this role is - $105,000–$140,000 base salary. On-target earnings of $150,000–$200,000. Think you’re a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don’t forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Are you a Level 3 / Tier 3 network support engineer who also enjoys scripting or programming — and is curious about how data powers intelligent systems? Our client is building vertically integrated networking systems and leveraging the data they generate to power the next generation of autonomous

Are you a Level 3 / Tier 3 network support engineer interested in data science and autonomous infrastructure? Our client is building vertically integrated networking systems and using the data they generate to power the next generation of AI-driven infrastructure. Must Have - Are curious about how r

Kinsley Power Systems is seeking an Industrial Sales Engineer to add to their team! The Industrial Sales Engineer's main objective is to sell industrial power generation applications including related equipment to end-users, engineers, electrical contractors, municipalities, government applications

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking for an experienced, organized, and motivated systems engineer. This position will work on an interdisciplinary team to integrate numerous first-of-a-kind technologies while developing scalable processes and procedures. The Systems Engineer will be responsible for the managing requirements, integration, and interfaces for one of the most consequential and cutting-edge technologies of our generation - fusion energy. The Thea Energy team is comprised of self-motivated, innovative, and collaborative individuals with an excitement for solving complex problems. This is a challenging position that requires a high degree of autonomy, and the ideal candidate must be able to move quickly. A proven track record of leading systems engineering, excellent communication skills, and a passion for new technologies and innovation is required.Key Responsibility Areas: • Develop system and interfacing requirements, protocols, and procedures, • Work closely with engineering and physics teams designing various systems to provide engineering coordination and support, • Ensure the efficient and systematic conversion of functional requirements into a scalable system architecture and execution strategy, • Assist in the management of technical, schedule, cost, and performance analysis for various development programs, • Develop and enact protocols to inform clear and efficient decision making processes, • Manage updates and changes to systems and interfaces, and monitor impacts to program schedule, cost, and performance, • Manage system configuration control, • Manage the product breakdown structure, • Coordinate with suppliers, vendors, and internal manufacturing engineering teams, • Coordinate design reviews and program management functions, • Institute the processes for, and help run HAZOPS and FMECA programs, • Implement an effective design integration program, • Develop and manage effective processes for making and tracking key decisions, • Develop and implement verification and validation processes, • Implement system design lifecycle management processes Ideal Experience & Skillsets:, • Bachelor's degree in a relevant engineering field, • 5+ years of experience in systems engineering, • Proven experience integrating large industrial and /or first-of-a-kind R&D projects (e.g. power plants, manufacturing facilities, particle accelerators, etc.), • Experience across mechanical, electrical, and fluid systems, • Experience with cryogenic, heating, fluid, vacuum, power electronics, and control systems is preferred but not mandatory, • Familiarity with the processes needed to build, test, troubleshoot, and scale complex mechanical and electrical systems, • Strong communication, collaboration, and interpersonal skills, • Ability to innovate, execute, and flourish in a fast-paced environment, • Exceptional work ethic, • Prioritization of safety above all else, • Ability to wear many different hats, • Team player who is excited to help others, • Ability to occasionally lift objects up to 50 lbs. #LI-RD1Company Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTOIt’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Overview The Process Engineer will be responsible for improvements relating to industrial/manufacturing processes and efficiency to reduce costs, improve sustainability, and maximize profitability. This role will be directly involved in the process design, operation, and implementation of such changes. Primary Job Responsibilities: • Assess current processes, take measurements, and interpret data, • Recommendand implementimprovements, • Perform research,design,test,and upgrade systemsforoptimization, • Defect reduction and measurement, • Develop best practices, routines, and innovative solutions to improve production rates and quality of output, • Perform process simulations, • Manage cost and time constraints, • Perform risk assessments, • Provide process documentation and operating instructions, • Implement computer-based Workflow Diagrams, • Lean Manufacturing Implementation (8 Wastes, Material Flow, 1 Piece Flow, Root Cause Analysis, etc.), • Implementing and Managing Operations Metrics and develop Pareto Reports, • ECO Management relief, • Packaging Design and Labels, • Operations Meeting Liaison, • Collaborate withmanufacturing, production, and quality teamregardingalignment forproduct requirements, • ISO/TL Auditing Support, • Work to ensure andmaintaincompliance with safety, operational, and regulatory standards of Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety Association (OHSA) Job Requirements: • Bachelor’s degree in mechanical,industrialor manufacturing engineering, • 2 – 5year’s experiencein a manufacturing environment, • Demonstrated leadership skills through experience, training and working well with others, • Working knowledge of AutoCAD,Inventor,and Microsoft Office, • Familiarity with OSHA Compliance and QM Physical Demands • The employee isfrequentlyrequired tosit; use hands tooperatebasic tools,keyboardsor controls; reach with hands and arms; and talk or hear, • The employeeis occasionally required towalkand/or standfrequently Why Choose Us? Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitivebenefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution We are located in Kearny, NJ. Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing, • Certifications such as U, S, or R stamps, GD&T training, or ASME code familiarity Experience with thermal piping, industrial utilities, system integration, or plant-level equipment would be beneficial for success in this role. Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job Description Director of Data Center Facility Operations - Totowa, NJ This opportunity is working directly with a leading mission-critical data center developer. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for an experienced Data Center Facility Operations Director to support a major critical data center. The Director will be responsible for managing the overall quality and service of the operation and maintenance of critical facility infrastructure systems in accordance with company's policies and procedures. This Data Centers is a 7x24x365 a year operation. The director will work with the Chief Engineer in maintaining relationships with various customers. The successful candidate will oversee the work performed by in-house facilities team to ensure the site is meeting the high and dynamic standards of its internal customers. The successful candidate will also provide consistent leadership and support through planning, communicating, and managing a team of professionals responsible to deliver data center facility services. Responsibilities include the delivery of quality and consistent services and support as established by the Corporation while satisfying unique customer requirements, managing issue resolution and ensuring proper performance reporting of key metrics for the site, establishing goals and objectives for the region based on strategic and business plans of the corporation. Responsibilities: • Performing periodic site walk-throughs in order to ensure Company's procedures (SOPS and MOPS) and standards are followed. This includes assisting the Facilities Manager, Technicians and any other contracted vendors, • Identifying any vulnerabilities while overseeing 3rd Party Critical Facilities onsite team, • Communicating the status of the operation process with senior management and onsite customers, • Site acceptance and commissioning of the facility to ensure the site meets the superior and dynamic standards of Company Standards, • Acting as liaison and coordinating efforts between the contracted vendors and the onsite customers, • Oversee the development of procedures/Method of Procedures (MOPs) for the DC build in addition to approving MOPs for data hall work, • Participating in the interview process for prospective candidates applying to this critical facility, • Auditing installed data center components. This audit will be used to verify the completion of the job scope by the vendor in addition to verifying the design documentation for the build-out and ongoing operations of the data hall space, • Provide strategic / tactical leadership with a background in best practices related to operations for performance and reliability on a variety of state of the art critical systems such as: medium voltage switchgear, diesel generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, fire detection / suppression; building monitoring systems; etc., • Supervise the on-site management; the facility manager, facility technicians, sub-contractors and vendors, ensuring that all work is performed according to established practices and procedures, • Manage Customer Relationship and act as escalation point of contact for the company at this site, • Manage the establishment of performance benchmarks, conduct analyses and prepare reports on all aspects of the critical facility operations and maintenance., • Work with business leaders to coordinate projects, manage capacity and optimize plant safety, performance, reliability and efficiency, • Review MOPs and SOPs for all work on critical data center facility equipment, • Ensure that a constant state of readiness in support of the mission goal of 99.999% uptime Qualifications: • 10-15+ years of data center facility operations and maintenance experience, • 5 years leadership experience in data center facility operations, • Budget / P/L responsibility, • Solid Understanding of Critical Electrical and Mechanical / HVAC equipment, • Experience supervising a technical data center operations staff, • Previous experience as a Data Center Facility Manager a must, • Strong verbal and written communications skills, • Good presentation skills in leading meetings (both conference and in person), • Superior analytical, planning and problem resolution skills Knowledge of Company Services and operations structure and support operations, • Highly organized with proved project management abilities, • Ability to multitask, establish priorities, manage conflicts, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus - Navy Nukes that were part of the Navy Nuke Program - EMN, ETN, MMNs; Seabees; Army - Power Generation; Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.) Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 8i74uohtx4j8orsg9x51zo8hco@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionCompany Description For More Open Positions Visit us at: http://recruiting.woongjininc.com/ Our Mission WOONGJIN, Inc. is a rapidly growing team who provides a range of unique, exceptional, and enhanced services to our clients. We have a strong moral code that includes the service of goodness without expectations of reward. We are motivated by the sense of responsibility and servant leadership. Benefits • Medical Insurance, • Vision Insurance, • Dental Insurance, • 401(k), • Paid Sick hoursJob Description We are seeking an experienced DevOps Engineer to assist with the maintenance, development, and implementation of one of our Intranet systems. The candidate must have a solid development background across multiple technical disciplines including J2EE web application development, Java client/server development, and Database Development. We are looking for a java developer who has Alteryx experience or related ETL tool Qualifications Requirements: • 9+ years in DevOps, web based related system development including Java experience in developing or maintaining intranet systems., • The below experience is required for a successful candidate in the below priority order, • Priority 1: Database Experience – Oracle based data modeling, SQL, Procedure development, DB tuning experience, • Priority 2: Front-End Development Experience – preferably with Kendo UI with VUE, • Priority 3: Back-End Development Experience – Java(Spring Boot) backend API development, • Priority 4: ETL: Alteryx Experience Qualifications: • Bachelor’s degree in Computer science or related discipline with an information technology focus, • API development experiences are plus, • ETL development experience with ETL Tools (Alteryx, Oracle Data Integrator, MS SQL SSIS, etc.) preferred, • BI reporting tool (Tableau, MS Power BI, etc.) development experiences are preferred, • Full lifecycle of ETL implementation understanding preferred (analysis, architecture, design, development, data extraction, staging and storage, transformation, presentation, testing, cutover/go-live planning), • Bilingual (Korean and English) required in order to work with outsourced development team in South Korea Salary: $110K-$125K (DOE) a year Additional Information All your information will be kept confidential according to EEO guidelines. * NO C2C *

Job Description RF Test Technician Job Description This role focuses on the design, development, documentation, and production support of RF and Microwave components, including active and passive devices, for the telecommunications industry. The RF Test Engineer performs hands-on testing, troubleshooting, and optimization of RF components and systems across prototype and production stages, ensuring high performance and reliability for a growing portfolio of products. Responsibilities • Design, develop, and document RF and Microwave components, including active and passive devices, for telecommunications applications., • Follow established RF test procedures and accurately complete detailed test reports for all tested products., • Troubleshoot and optimize discrete power amplifier modules and low noise amplifiers (LNAs) at both prototype and production stages., • Define and construct RF test setups to measure VSWR, gain, group delay, phase variation, IP3, P1dB/P3dB compression points, noise figure, and harmonics for narrowband and broadband high-power amplifiers., • Perform RF testing using network analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Define and construct test setups to measure VSWR, insertion loss, group delay, and phase variation for passive filtering products., • Test, characterize, and optimize Distributed Antenna Systems (DAS) related equipment such as bi-directional amplifiers and tower-mounted amplifiers for public safety and carrier applications., • Read, interpret, and work from electronic and mechanical blueprints to support testing and troubleshooting activities., • Communicate technical information clearly and professionally with internal teams and clients., • Manage multiple tasks and priorities simultaneously while adapting quickly to changes in production requirements., • Document new RF designs and test configurations to support future repeat orders and ongoing production., • Perform component-level troubleshooting and board repair using oscilloscopes, spectrum analyzers, network analyzers, and other test equipment., • Use test equipment and tools, including microscopes, to support detailed inspection, soldering, and rework activities., • Apply strong electronics and electrical knowledge to analyze schematics, PCB layouts, and test results., • Maintain accurate records of test results, issues, and corrective actions to support continuous improvement. Essential Skills • 3–5 years of hands-on experience in testing and optimizing active and passive discrete RF components., • Strong RF testing experience using network analyzers, spectrum analyzers, power meters, noise figure meters, and other RF laboratory test equipment., • Proficiency in defining and building RF test setups to measure VSWR, gain, group delay, phase variation, IP3, compression points, noise figure, harmonics, and other key RF parameters., • Experience in testing and optimizing power amplifier modules and low noise amplifiers (LNAs) in both prototype and production environments., • Ability to test and characterize passive RF filtering products, including measurement of VSWR, insertion loss, group delay, and phase variation., • Full understanding of Distributed Antenna Systems (DAS) and the ability to test and optimize bi-directional and tower-mounted amplifiers for public safety and carrier systems., • Component-level troubleshooting skills for RF and electronic assemblies, including board-level repair., • Ability to read and interpret electronic and mechanical blueprints, schematics, and technical drawings., • Proficiency with general electronic test equipment such as oscilloscopes, network analyzers, spectrum analyzers, and other laboratory instruments., • Strong electronics and electrical fundamentals, including practical experience with PCB-level diagnostics and soldering., • Ability to read and speak English and interpret documents such as safety rules and operating procedures., • Strong interpersonal and communication skills, with the ability to work effectively within a team and independently., • Proficiency with Microsoft Office applications for documentation, reporting, and communication. Additional Skills & Qualifications • Experience documenting new RF designs and test configurations for repeat production orders., • Experience working within a structured RF test engineering or RF test technician team., • Ability to communicate technical concepts clearly to both technical and non-technical stakeholders, including clients., • Strong organizational skills with the ability to manage multiple tasks and shifting priorities in a production environment., • Attention to detail in test execution, data recording, and reporting., • AutoCAD experience or familiarity is a plus for working with mechanical drawings and layouts., • Experience using microscopes and fine-pitch soldering techniques for board-level rework is beneficial., • Demonstrated ability to contribute to continuous improvement in test processes and product performance., • Comfort working in a growing organization, introducing new RF and Microwave products. Work Environment The RF Test Engineer works as part of a dedicated RF Test Technician and Engineering team, collaborating closely with test engineering and design engineering leadership. The environment is laboratory and production oriented, with daily use of RF test equipment such as network analyzers, spectrum analyzers, power meters, noise figure meters, oscilloscopes, and microscopes. The role involves hands-on work at test benches and production lines, supporting both prototype development and volume manufacturing. The organization is experiencing significant growth, introducing new RF and Microwave products, which creates opportunities to support new designs, improve processes, and contribute to the expansion of the business. The culture emphasizes teamwork, clear communication, adherence to safety rules and operating procedures, and a balance of independent and collaborative work. Job Type & Location This is a Contract to Hire position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $25.00 - $33.65/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Jun 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Be Part Of A High-Performing Technology Team Join a forward-thinking Commercial Banking technology organization dedicated to building modern, scalable integration platforms that power mission-critical financial systems. This team operates at the center of enterprise application connectivity—designing and delivering high-performance middleware and API solutions that enable seamless communication across global systems and stakeholders. The environment is collaborative, Agile-driven, and innovation-focused, with engineers working closely alongside Product Owners, QA teams, architects, and international business partners. The team values clean architecture, engineering best practices, and thoughtful modernization, while maintaining the stability and rigor required in a regulated financial environment. This role offers the opportunity to contribute to enterprise-scale API platforms supporting global banking operations, including cross-border collaboration with Japanese and English-speaking stakeholders. What’s In Store For You • Opportunity to work on large-scale, customer-facing API platforms within Commercial Banking, • Exposure to modern cloud environments and DevOps practices, • Collaborative Agile team culture with strong engineering standards, • Long-term, high-impact initiatives focused on scalability and modernization, • Cross-regional engagement with global teams in both Japan and the U.S. How You Will Make An Impact • Design, develop, and maintain scalable middleware and RESTful API applications using Java and Kotlin, • Partner with global stakeholders (Japanese and English-speaking) to translate business requirements into technical solutions, • Contribute to application architecture and apply design patterns to ensure scalability and performance, • Write high-quality, maintainable code with unit testing and automation, • Participate in code reviews and promote engineering best practices, • Support CI/CD pipelines and deployment processes in cloud environments (AWS, Azure, or GCP), • Collaborate within Agile sprint cycles to prioritize and deliver features, • Troubleshoot and resolve production issues, ensuring system reliability and performance Are You a Proven Senior Middleware/API Engineering Professional Ready to Make an Impact in a Global Banking Environment? • 8–10+ years of application development experience, with strong expertise in Java (Kotlin experience is a plus), • Demonstrated experience designing and supporting customer-facing RESTful APIs, • Strong understanding of JSON, web services technologies, and data structures, • Experience applying design patterns in scalable, enterprise-grade applications, • Hands-on experience with Git, Jira, CI/CD tools, and DevOps practices, • At least 1 year of experience working with public cloud platforms (AWS, Azure, or Google Cloud), • Proven ability to deploy applications to production and support the full application lifecycle, • Experience working in Agile development environments, • Professional-level bilingual fluency in Japanese and English (written and verbal), with ability to collaborate across global teams, • Bachelor’s degree in Computer Science or equivalent experience, • Financial services or banking industry experience preferred, • Strong communication skills, self-starter mindset, and ability to work independently in a structured enterprise setting This is an opportunity for a senior-level engineer who thrives in global collaboration, values clean architecture, and is passionate about building reliable, scalable systems that power critical financial operations.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Embedded Engineer (Microprocessors) We are seeking a seasoned Electrical Engineer, embedded engineer to design and program complex electrical systems. Responsibilities: • Engineered and designed microprocessor-based, mixed-signal circuit boards for specialized products, • Developed C language embedded software for servos, ensuring smooth interaction with external systems., • Led the construction and testing of prototype circuits, providing guidance to design and technical teams., • Authored comprehensive product documentation, including user instructions, project logs, test reports, and design evaluations., • Collaborated with Manufacturing to facilitate product commercialization, manage bills of materials, and develop documentation and test fixtures., • Provided engineering support for existing products to ensure optimal performance. Requirements: • A minimum of 8+ years of experience in electro-mechanical applications, • Strong theoretical background, • Proficiency in circuit board design, schematic generation, and PCB layout tools, • Expertise in open/closed-loop servo mechanisms, motor design, and inverter development., • Experience in power supply development and industrial process control., • Ability to multitask in a hands-on environment., • Proven ability to work effectively in team settings and independently., • Provides project management assistance for control systems as needed., • Microsoft Office products to perform engineering and project management tasks., • Ability to write routine reports and correspondence., • Effectively present information to top management, customers, and employees., • Apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Close vision, and color vision ability required, • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, reaching, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times. Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Education: • B.S. in Electrical Engineering or B.S. in Electrical Engineering Technology or an equivalent degree or years of experience What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base & bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you! We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description At Coinme, we're redefining access to financial services in a digital world. By combining the cutting-edge power of blockchain technology with everyday simplicity, we make digital currencies accessible and usable for all. As the world's largest network of cryptocurrency kiosks with over 40,000 locations nationwide, we're breaking down barriers to crypto adoption through our seamless mobile app, secure digital wallet, and DeFi integrations. Beyond our consumer offerings, we're also the infrastructure powering the crypto revolution for businesses. Through our enterprise Crypto-as-a-Service (CaaS) platform, we enable businesses to launch crypto capabilities in weeks, not months. Our modular, API-first infrastructure provides everything from KYC and payment processing to liquidity and custody solutions—all fully licensed and compliant. We're big enough to lead the charge in decentralized finance but small enough that your ideas will make waves. Every role at Coinme contributes to building a financial future where everyone has the tools to thrive. At Coinme, your growth fuels our mission. Together, we RISE. Claude Code Platform Lead Own the strategy, systems, and training that turn AI-assisted development from an experiment into Coinme's engineering superpower. You will be the central force multiplier for our 35+ engineer organization—building the skills, workflows, and shared infrastructure that enable every team to ship faster and better with Claude Code. This is not a support role. You will directly shape how Coinme engineers build software every day. What You'll Be Working On (Your Impact): • Design, build, and maintain a centralized repository of CLAUDE.md project context files across all Coinme repositories, ensuring Claude Code understands our architecture, coding standards, compliance requirements, and domain patterns out of the box, • Create custom Claude Code slash commands, hooks, and workflows tailored to Coinme's stack—including compliance-aware code generation, automated test scaffolding, and review automation for our CQRS/Event Sourcing architecture, • Implement and manage the GitLab CI/CD integration for Claude Code, enabling automated merge request creation from issues, AI-assisted code review in pipelines, and commit attribution across all engineering teams, • Build and deliver structured training programs to close adoption gaps across the engineering org, with a focus on the highest-leverage skills: headless/CI-CD workflows, hooks and commands, and test-driven development with Claude Code, • Monitor engineering adoption metrics via the Claude Enterprise Analytics API, identify engineers and teams that are underutilizing the tool, and design targeted interventions to accelerate their productivity, • Develop and maintain a living playbook of best practices, prompt patterns, and workflow recipes that codify what Coinme's top Claude Code users (power users generating 5,000+ tool accepts) do differently, • Partner with Engineering Leadership to define proficiency benchmarks, run competency assessments, and measure ROI of AI tooling investment across the organization, • Evaluate and integrate emerging Claude Code capabilities—including MCP server integrations, multi-file editing workflows, and agentic coding patterns—as they become available, • Work within and build tooling for our technology stack:, • GitLab (repos, CI/CD pipelines, merge requests), • Jira / Atlassian (project management, sprint tracking), • Claude Code CLI and VS Code extension, • Claude Enterprise Analytics API, • Java 17+ / Spring Boot / Reactive Java (understanding, not necessarily writing daily), • Kubernetes, Helm, Argo platform, • Multi-repo microservice architectureWhat We're Looking For:, • 4+ years of experience as a software engineer with hands-on production coding experience, • Deep, daily-driver proficiency with Claude Code and comparable AI coding assistants (Cursor, GitHub Copilot) — you should be a power user, not someone who's "tried it a few times", • Experience implementing and integrating with agentic harnesses, e.g. Open Claw, Hermes, Eigent, etc., • Experience building developer tools, internal platforms, CLI utilities, or developer experience infrastructure, • Demonstrated ability to teach technical concepts to engineers at varying skill levels — through documentation, workshops, pairing sessions, or recorded content, • Experience with CI/CD pipeline design and automation (GitLab CI preferred), • Strong understanding of Git workflows, code review processes, and merge request automation, • Experience working with REST APIs for data integration and dashboard building, • Comfort navigating and understanding large, multi-repo codebases without necessarily being an expert in every language or framework, • Excellent written communication — you'll be writing CLAUDE.md files, training docs, and playbooks that need to be clear enough for both humans and AI to understand, • Self-directed and proactive — this is a one-person function where you set the agenda based on data and engineer feedbackNot Required, But Nice to Have:, • Claude Certified Architect (CCA), Foundations credential from Anthropic, • Familiarity with Java / Spring Boot / CQRS / Event Sourcing patterns (Coinme's primary backend stack), • Experience building analytics dashboards or working with usage telemetry data, • Background in DevRel, developer advocacy, or engineering enablement, • Experience in fintech, crypto, or regulated industries where compliance-aware code generation adds particular value, • Experience running hackathons, training programs, or engineering culture initiatives Check out our AI Usage Guidelines to understand how we approach AI tools during the hiring process.

Job Description About the Role Fabuwood is looking for a detail-oriented R&D Engineer to join our Product Development team. This role is focused on researching concepts, creating drawings and documentation, and supporting structured execution throughout the R&D and NPI process. You will work closely with senior R&D members, Product Development, and Implementation teams to move ideas from early exploration into clear, validated, launch-ready solutions. This position blends technical research, documentation, CAD work, and project ownership, with some hands-on prototyping as needed. It is ideal for someone who is more computer- and systems-focused, but still comfortable supporting physical testing and validation when required. What You’ll Do Research and Concept Development • Research solutions, industry standards, and best practices using online and technical resources., • Explore and document design concepts, construction methods, and alternative approaches., • Evaluate options and tradeoffs to support R&D decision-making. Documentation and Drawings (Primary Focus) • Create and maintain CAD drawings, 3D models, and technical documentation., • Document concepts, prototypes, testing results, decisions, and best practices., • Translate R&D ideas into clear, structured documentation for downstream teams., • Maintain organized records to support repeatability, scale, and future improvements., • Ensure drawings and documentation are accurate, clear, and ready for manufacturing and implementation. R&D Support and Prototyping • Support physical prototyping and testing when needed., • Assist with A/B comparisons, validation, and iterative improvements., • Collaborate with R&D on feasibility, materials, and construction methods., • Provide technical support to hands-on R&D efforts without being shop-based full time. Project Management and Execution • Own R&D workstreams from concept through handoff to implementation., • Help define scope, priorities, timelines, and dependencies for R&D initiatives., • Coordinate with cross-functional teams (Product, Manufacturing, Engineering, Operations)., • Track progress, identify risks, and help resolve blockers early., • Support smooth transitions from R&D into NPI and go-live phases. What You Bring • Strong documentation, drawing, and organizational skills., • Working knowledge of CAD and 3D tools., • Familiarity with Cabinet Vision, 2020 or similar cabinetry/design software., • Experience researching technical solutions and best practices., • Ability to manage multiple workstreams while maintaining attention to detail., • General understanding of cabinetry, construction, or manufacturing processes., • Comfortable working in a fast-paced, evolving environment., • Clear communicator who works well with both technical and non-technical teams. Preferred Experience • Experience in R&D, Product Development, or Engineering roles., • Exposure to New Product Introduction (NPI) or product launch processes., • Background in cabinetry, construction, manufacturing, or related industries., • Experience supporting project timelines, priorities, and cross-functional work. Who You Are • Organized, methodical, and dependable., • Strong at turning ideas into clear documentation and drawings., • Comfortable working primarily on a computer, with occasional hands-on support., • A clear communicator who collaborates well across teams., • Calm under pressure and adaptable as priorities change., • Curious, resourceful, and motivated by solving practical problems. About Fabuwood At Fabuwood Cabinetry, we believe that beautiful, well-crafted kitchens should be accessible to everyone. As one of the largest cabinet manufacturers in the U.S., we combine innovation, efficiency, and craftsmanship to deliver exceptional products and experiences. Our culture is built on our five core values - Power of We, Positivity, 100 MPH, Own It, and Embrace Challenges - which guide how we work, grow, and support one another every day. We stand apart through our three uniques - Speed, Technology, and Quality - enabling us to move quickly, leverage modern tools, and maintain high standards across everything we build. Within this culture, the Product Development and R&D team plays a critical role in shaping the future of our products. From early research and concept development to clear documentation and execution, this team turns ideas into cabinetry that sets the industry standard. At Fabuwood, we are not just building cabinets - we are building innovation, together.

Job Description Senior Electrical Designer - MA, PA (Hybrid) Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior Electrical Designer in our Power group. Our Power Department is leading the future of the energy and utility generation industry, focused on combined heat and power, alternative fuels like biogas and hydrogen, fuel cells, and battery storage, among many other cutting-edge technologies. Responsibilities include the following: • Produce drawings and design of electrical systems for heavy industrial projects such as cogeneration power plants, central heating and cooling plants, renewable energy systems and large chillers and boilers., • Must have general understanding of medium voltage and low voltage electrical distribution systems including switchgear, switchboards, motor control centers, panelboards, generators, and transformers., • Should be capable of designing switchgear, relaying & metering diagrams, lighting, raceways, grounding systems, and lightning protection systems., • Investigation and interpreting manufactures data, set up of model views and sheets using corporate standard., • Perform design calculations including feeder and branch circuit sizing, protective device sizing and voltage drop for review by the Engineer of Record., • Coordinate routing of cable, and miscellaneous components with other trades., • Assuring tasks are complete, accurate and in accordance with good engineering practice., • Review project files for compliance with standards and procedures., • Ability to interpret one-line diagrams, AC three-line diagrams and DC elementary diagrams., • Design and layout systems, create drawings and wiring plans for installation., • Should have experience with physical design of conduits and cable trays., • Validate designs and prepare customer presentation materials., • Use the companies’ internal database to plan personnel and scheduling needs. Essential Skills & Requirements: • Associate degree or equivalent from a vocational training program or technical school., • 5 plus years’ experience desired., • Revit certification extremely required or capable of learning., • Familiarity with NEC and NESC is essential, IEEE desirable., • Experience using BIM360 Cloud Collaboration platform is a plus., • Good oral and written communication skills, • Motivated and self-sufficient, strong computer skills and detail-oriented perspectives., • Ability to work individually or in a team setting with strong interpersonal, problem solving and analytical skills., • Customer service perspective with the ability to communicate effectively with staff and clients., • Knowledge of MS Office products including Word, Excel, Outlook. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com. The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $90,000.00 to $115,000.00 annually.

Job Description Building Engineer Location: Jersey City, NJ BLT is seeking a dedicated and professional Building Engineer to join our luxury residential community in Jersey City, NJ. The Building Engineer will oversee all mechanical / electrical operations, installation, and maintenance of equipment, systems, and facilities, ensuring they operate safely, efficiently, and reliably. This role is hands-on and supervisory, supporting a high standard of performance across the property. Responsibilities of the Building Engineer: • Supervise all engineering operations and mechanical & electrical maintenance for a portfolio of high-rise apartment buildings., • Plan, implement, and manage all mechanical / electrical operations, maintenance, communications, energy management, and manpower development programs., • Troubleshoot and repair all mechanical systems, respond promptly to service requests, and report any potential safety hazards or liability concerns., • Manage municipal-mandated inspections (fire/life safety, backflow, elevators, etc.)., • Oversee facility utilities, including gas, electric, sewer, water, phone, and CATV., • Direct maintenance programs related to both the interior and exterior condition and appearance of the properties., • Plan and execute preventative maintenance programs for all systems, including mechanical, electrical, HVAC, plumbing, fire/life safety, generators, security, access control, BMS, and vertical transportation., • Ensure all site-specific documentation, inspections, and reports are completed accurately and on time., • Administer inventory control programs and manage the purchasing of parts and supplies., • Establish and maintain programs to ensure compliance with applicable codes, regulations, and company standards., • Lead and develop a team through effective communication, supervision, training, and scheduling to ensure work is completed efficiently and within budget., • Maintain staffing schedules to ensure 24/7 emergency coverage, and support ongoing skill development and learning initiatives for assigned personnel. Requirements for the Building Engineer: • 3+ years of hands-on experience in the HVAC trade industry., • Strong knowledge of electrical systems in the industry., • Strong knowledge of local and national mechanical / electrical codes., • Must hold all required city, state, and federal licenses and certifications., • Ability to read and interpret blueprints and schematic diagrams., • Proficiency in the use of hand and power tools., • Availability to work varying shifts, weekends, and holidays as needed., • Basic plumbing and piping skills, with working knowledge of compressors and air systems. Benefits of the Lead Engineer: • Competitive salary ($80,000-90,000) and comprehensive benefits package, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Tuition reimbursement program, • Employee housing discounts at BLT-owned properties BLT is an equal opportunity employer. This description is not intended to be a comprehensive list of all duties, responsibilities, or qualifications associated with this position. Other duties may be assigned as needed. Powered by JazzHR bjCFOloct3

Job Description Job Title: Commercial Building Engineer Location: Fort Lee, NJ 07024 Job Type: Full-Time We are a leading property management/real estate firm dedicated to maintaining top-tier, efficient, and safe environments for our tenants. We are currently seeking an experienced and proactive Building Engineer to oversee the daily operations, preventative maintenance, and physical upkeep of our premier facility. The Role As our Building Engineer, you will be the backbone of our property's operations. You will be responsible for operating, maintaining, and troubleshooting complex mechanical, electrical, plumbing, Sprinkler and HVAC systems. You will ensure our building runs at peak efficiency, reducing operational costs and enhancing tenant satisfaction. Key Responsibilities • Facility Maintenance: Commercial HVAC troubleshooting, plumbing repair, electrical systems, lighting maintenance., • ·Repairs & Installation: Carpentry, drywall patching, painting, flooring installation, fixture mounting., • Building Operations: Monitor building automation systems (BAS) and energy management controls to optimize performance and reduce costs., • Tenant Requests: Respond promptly to tenant service requests and resolve physical deficiencies., • Safety & Compliance: Ensure all facility operations adhere to fire, life safety, and local building codes. Qualifications & Requirements: • Minimum 5-6 years of hands-on experience in commercial or multi-family building maintenance., • Strong technical knowledge of HVAC, electrical, sprinkler and plumbing systems., • Utilize hand and power tools to perform carpentry and painting repairs, ensuring high-quality, professional finishes., • Excellent problem-solving skills and the ability to work independently or as part of a team. What We Offer · Competitive salary based on experience

Job DescriptionDescription: Kinsley Power Systems is seeking an Industrial Sales Engineer to add to their team! The Industrial Sales Engineer's main objective is to sell industrial power generation applications including related equipment (transfer switches, switchgear, load banks, fuel tanks, etc.) to end-users, engineers, electrical contractors, municipalities, government applications and OEMs, among others. Kinsley Power Systems, a family-owned business, has been an industry leader in generator service, sales and rentals for over 60 years. If you want to join a growing company with strong family values, a great culture, a company where you are valued for your hard work and have opportunities to grow – then look no further, come join our Kinsley family! Responsibilities: • Responsible for pursuing new project opportunities and closing sales, • Influences quote development, appropriate equipment and support services, project terms and conditions and ensuring customer support exists through the equipment warranty period, • Meets or exceeds quarterly sales quotas by driving sales with targeted customer types in identified verticals, as well as identifies opportunities with existing accounts in assigned territory, • Negotiates and closes deals which derive significant revenue and associated margins, • Understands the company's complete suite of products and services and identifies and hands-off cross-selling opportunities to other business verticals: residential equipment, rental agreements, prime power equipment, service contract sales, • Makes joint sales calls with appropriate technical/engineering sales resources - providing in-depth technical knowledge of the solutions we have to offer, • Develops long-term relationships with customer decision makers and influencers at the electrical contractor, engineer and building owner levels, • Maintains customer/project data in Customer Relationship Management software (CRM): Tracks active projects for weekly and monthly reporting, documenting of business development activity, and obstacles to success Preferred Skills and Experience: • Bachelor’s degree; or equivalent combination of education and experience will be considered on a case-by-case basis, • Proven passion and success in sales required, • Must be self-motivated with the ability to work independently and in a team atmosphere, • Possess a strong customer services focus with good verbal and written communication skills, • Must possess a strong sense of urgency and a proven ability to meet deadlines, • Proven competency in Microsoft Office, • Ability to work a flexible schedule, including overnight travel as required, • Possess and maintain a current, valid state driver’s license All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Requirements:

Job Description H&H Construction Services is offering exciting career opportunities for Resident Engineers with a Professional Engineer License. We currently have multiple inspection projects for movable and fixed bridges in Northern, Central and Southern New Jersey. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Serve as the on-site representative overseeing all construction activities to ensure compliance with contract documents, plans, and NJTA standards, • Provide leadership and direction to inspection staff, including assignment of duties, performance oversight, and quality control of field activities, • Monitor contractor performance, schedule progress, and adherence to project milestones; identify risks and implement corrective actions as needed, • Administer construction contracts, including review and approval of submittals, RFIs, change orders, and payment applications, • Ensure compliance with all applicable safety regulations, traffic control requirements, and environmental standards, • Coordinate daily with contractors, design teams, NJTA representatives, and other stakeholders to resolve field issues and maintain project continuity, • Maintain accurate project documentation, including daily reports, quantities, field measurements, and as-built records, • Review and verify construction quantities and support project controls, cost tracking, and forecasting activities, • Facilitate progress meetings and prepare status reports for senior management and client stakeholders, • Oversee inspection of materials and workmanship to ensure adherence to specifications and quality standards, • Support dispute resolution and claims analysis, including documentation of field conditions and contractor impacts, • Ensure successful project closeout, including punch list completion, final documentation, and turnover to the owner Requirements • Bachelor’s degree in Civil Engineering, Construction Management, or related discipline, • Active Professional Engineer (PE) license in New Jersey preferred; NICET Level IV with equivalent highway construction experience considered, • 12–15+ years of progressive experience in highway or heavy civil construction, including resident engineering, field inspection, and construction oversight, • Demonstrated leadership managing contractors, inspection staff, and daily site operations on complex infrastructure projects, • Strong working knowledge of New Jersey Turnpike Authority standards, specifications, and procedures, • Familiarity with Critical Path Method (CPM) scheduling and its application to construction management, • Proficiency in construction management systems, documentation, and reporting tools, • Excellent communication skills with the ability to coordinate effectively with clients, agencies, and project stakeholders, • Advanced proficiency in Microsoft Office and strong analytical capabilities, • Proven ability to operate independently in a field leadership role while collaborating with multidisciplinary teams, • Valid driver’s license and ability to travel to active project sites Benefits We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job DescriptionDescriptionWe're a financial trading firm with critical infrastructure across the New Jersey metro area, and we're hiring a Data Center Operations Engineer to join our infrastructure team. You'll handle hands-on work across our NJ datacenter footprint, supporting the low-latency environment that powers our trading operations. You'll work alongside experienced engineers from our systems, network, and hardware teams, with significant opportunities to deepen your expertise in data center operations, structured cabling, and trading infrastructure. The role offers exposure to enterprise-grade hardware, complex multi-site environments, and the operational rigor required to support a production trading platform. What You’ll Do • Travel between our NJ datacenter sites to install, configure, troubleshoot, and decommission servers, network equipment, and related hardware, • Rack, stack, cable, label, and document equipment to established standards, • Maintain accurate rack elevation diagrams, asset inventory, and cabling records, • Monitor environmental conditions and power utilization across all sites, and flag risks or propose corrective actions, • Coordinate logistics for shipping and receiving of servers, network gear, and telecom equipment, • Supervise on-site visits from external vendors, colocation smart-hands providers, and contractors, • Maintain inventory of cabling, optics, transceivers, spare servers, and network equipment, • Partner with our systems, network, and hardware engineering teams on deployments, capacity planning, and ongoing operational work, • Uphold datacenter cleanliness, safety, and security standards, • Perform most of the installation, maintenance, and project work outside of trading hours. Most operational activity happens after the US market close (4:30 PM ET), with occasional weekend maintenance windows as needed, • Respond on-site to emergencies and first-response incidents during and outside trading hours What We’re Looking For • 2-4 years of hands-on experience in a data center, colocation, or telecommunications environment. Financial services or other low-latency environments are a plus, • Working knowledge of structured cabling standards and best practices for both copper and fiber, • Familiarity with server and network hardware from vendors like HP, Dell, Cisco, or Arista, • Solid grasp of basic networking concepts, including Layer 1/2 troubleshooting, patch planning, and cable testing, • Strong attention to detail with documentation, labeling, and inventory tracking, • Clear written and verbal communication, with the ability to coordinate effectively with internal engineers and external vendors, • Self-directed and reliable, with the judgment and discipline to work independently across multiple sites, • Available to work primarily after US market close (4:30 PM ET), including occasional weekend maintenance windows, • Able to reliably reach our primary NJ datacenter within 30 minutes for emergency response, first-response incidents, and required maintenance activities, • Reliable personal vehicle and a valid driver's license. The role involves regular travel between our NJ sites, with approximately 75% of work time spent on-site across these locations, • Able to lift up to 50 lbs. and perform physical datacenter work, including racking, cabling, and climbing ladders for overhead cable runs Why Join UsOur flat organizational structure promotes teamwork across the Firm and offers easy access to senior staff. While we work exceptionally well as a team in the office, our bonds are further strengthened through company events, activities and giving back. Volleyball, soccer, hockey, 5K runs, picnic, parties, and trivia nights provide friendly competition and build better relationships. By getting out of our usual environment and doing out-of-the-ordinary things together, we foster creativity and broaden our imaginations to accomplish new challenges. Benefits: • Highly competitive salary & bonus opportunity, • Generous paid time off and flexible scheduling, • 100% coverage of medical, dental, vision, life, and disability benefits for single coverage, • Generous Paid Parental Leave, • Retirement Plans: 401K and Roth 401K, • Profit sharing plan, • Long- and short-term disability Additional Perks:, • Breakfast and lunch covered by the firm, • Company outings and events Professional Development:, • In-house education team – classes and resources are offered for continuous learning opportunities, • Mentorship Program through your first six months of employmentThe base compensation range for this role is approximately $85,000-$115,000 contingent on experience. Wolverine Trading's total compensation model includes base salary and an annual discretionary bonus.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Control Systems Engineer to work on the design of the control system for the company’s Eos integrated stellarator. This role will define the overall control system architecture, select core technologies, design platforms, and manage technical interfaces between all major control subsystems including plasma control, power supply control, cryogenic control, safety systems, and data acquisition. As a senior technical engineer, this role will work closely with subsystem teams, vendors, and collaborators to ensure that the architecture meets real-time performance, reliability, scalability, and regulatory requirements. This role is pivotal in shaping the next-generation control infrastructure for one of the most innovative stellarator-based fusion pilot plants in development. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the definition of the Eos control system architecture (functional, physical, and communication layers)., • Select core technologies for real-time control, SCADA, networking, timing, and data management., • Develop high-level system specifications, interface control documents (ICDs), and system block diagrams., • Oversee integration and coordination of control subsystems., • Ensure consistency across communication protocols (e.g. OPC UA, DDS, Modbus, EPICS)., • Contribute to the selection of PLC/DCS platforms for safety- and mission-critical systems., • Work with the AI/ML and Plasma Control teams to integrate predictive control and digital twin functionality into the architecture., • Support development of conceptual and preliminary design packages, including architecture reviews and validation plans., • Collaborate with systems engineering to ensure alignment with the overall plant functional architecture and TRL maturity goals.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Control Systems, Physics, or related field., • 5+ years of experience in control system design for fusion energy, particle accelerators, large scientific facilities, or similar high-reliability environments., • Strong proficiency with EPICS or TANGO control frameworks, Simulink and MATLAB for system modeling and simulation, SysML/UML for system-level architecture and documentation, and OPC UA, DDS, TCP/IP, PTP/White Rabbit communication protocols., • Experience with high-speed data acquisition, real-time systems, and distributed control., • Knowledge of IEC 61508 / 61511 or other safety-related standards., • Familiarity with PLC platforms (e.g. Siemens, Beckhoff, Allen-Bradley)., • Experience working in multi-disciplinary teams and managing technical vendors., • Hands-on experience with FPGA or embedded systems is a plus., • Previous experience in early-phase fusion device development is highly desirable.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • Verify results of test reports; Assist with field troubleshooting of commissioned equipment as needed; Field experience in the operation and application of Power Quality Analyzers, Power Disturbance Analyzers, Data loggers, and related system testing equipment Qualifications: • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.) Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: yygxshwfpycbnhwkz6g9pnnsde@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Job Summary The Manufacturing Engineer is responsible for providing improvement solutions for the facility's production tooling, equipment, and procedures to ensure efficient operations. This hands-on position requires spending the majority of time on the manufacturing floor and must be able to take projects from conception to completion. Primary Job Responsibilities • Programming for all production processing needs., • Preparing jobs to be released for production. Familiarity with Amada VPSS BLANK 4ie software is a plus., • Creates product assembly work instructions and manufacturing equipment processing instructions., • Maintains a program database and detailed records on all CNC machines (Amada Turret Punch, Laser, Punch/Laser Combo)., • Uses engineering drawings to program machinery for engineered items., • Troubleshoots problems with failed products, products, or systems., • Participates in the resolution of quality issues and drive associated improvements., • Identifies and plans manufacturing assembly and test workflow layout., • Works with Quality Manager to ensure and maintain compliance with safety, operational, and regulatory standards of Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety Association (OHSA)., • Continuously assesses opportunities for improvement and any needed changes to management systems., • Evaluate manufacturing processes by designing and conducting research programs., • Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors., • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Ensures product and process quality by designing testing methods., • Provides manufacturing decision-making information by calculating production, labor, and material costs., • Provides manufacturing engineering information by answering questions and requests., • Maintains product and process database by writing computer programs and entering data., • Completes design and development projects by training and guiding technicians., • Maintains professional and technical knowledge by attending educational workshops. Job Qualifications • Bachelor’s degree in Mechanical or Manufacturing Engineering, or 5 to 10 years of manufacturing experience in a related field., • 3 to 5 years of Solidworks or Inventor experience as well as:, • CAD and 2D drafting experience., • Machine Code experience., • CNC and Automation experience (Amada AP100US or similar software)., • ISO 9001 experience with process documentation and system audits., • Relevant industry experience in the manufacturing environment. Why Choose Us? Raycap, Inc. has decades of experience creating products that protect and support the world’s most valuable assets from power and lightning surges. We focus on 5 Core Values of Customer Focus, Talent, Excellence, Innovation and Integrity, and those values show in everything we do. We also believe it is very important to invest in our employees, and we are proud to offer: • A very competitive benefit package, • Paid Time Off, • 10 company paid holidays, • Tuition Reimbursement, • A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, gender identity, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job DescriptionCompany Description Salary: $9438+ month Full time / yearly contract term Work Location: Ridgefield Park, NJ Bilingual (Korean and English) required We are seeking an experienced DevOps Engineer to assist with the maintenance, development, and implementation of one of our Intranet systems. The candidate must have a solid development background across multiple technical disciplines including J2EE web application development, Java client/server development, and Database Development. Job Description • 9+ years in DevOps, web based related system development including Java experience in developing or maintaining intranet systems., • Experienced Java Developer with either knowledge in the following areas; Full J2EE stack, RIA framework, Spring, iBatis/Hibernate/JPA, Java, JDBC, JSP/Servlet, Web Services, JMS, etc., • Experience with either applications servers: WebLogic, JBoss, Tomcat, or Sun One J2EEWAS, • Experience with HTML/DHTML, jQuery/JSON, Java Script, AJAX, • Experience with Database modeling with RDBMS (Oracle, MS SQL, Maria DB, Etc.), • Experience with RDBMS store procedure & function development, • Experience with multiple Server Operating System: UNIX, Linux, Windows server platforms. Qualifications • Bachelor’s degree in Computer science or related discipline with an information technology focus, • API development experiences are plus, • ETL development experience with ETL Tools (Alteryx, Oracle Data Integrator, MS SQL SSIS, etc.) preferred, • BI reporting tool (Tableau, MS Power BI, etc.) development experiences are preferred, • Working with Samsung Global Systems such as Next ERP/GSCM preferred, • Full lifecycle of ETL implementation understanding preferred (analysis, architecture, design, development, data extraction, staging and storage, transformation, presentation, testing, cutover/go-live planning), • Bilingual (Korean and English) required Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionSalary: $38.46 - $57.69 Per Hour DOE Company Overview LD power automation is a leading engineering company specializing in marine and industrial electrical and control services and products. With extensive experience in installation, commissioning, and troubleshooting, we deliver professional and timely solutions that help our clients achieve operational excellence. Our commitment to building strong, long-term relationships is founded on trust and a deep understanding of our clients' needs. For more information, visit our website. Job Summary Were looking for a hands-on Field Service Engineer whos ready to dive into the world of marine and industrial power systems. If you enjoy solving real-world problems, working with your hands, and being the go-to expert when things need fixing or fine-tuning, this might be the role for you. Youll be installing, troubleshooting, and maintaining everything from motors and switchgear to PLCs and control systems aboard large ocean-going vessels while theyre in port. Its a mix of tech, teamwork, and travel, with plenty of variety and challenges to keep things interesting. Youll work closely with customers, vendors, and manufacturers to make sure systems run smoothly and safely. If youre someone who takes pride in doing things right and enjoys working in dynamic environments, wed love to hear from you. Key Responsibilities • Communication between cooperating parties and assist to ensure smooth operation of electrical and mechanical equipment., • Performing maintenance including field installation, validation, and testing of electronic, electric and mechanic components., • Troubleshooting by observing mechanical devices in operation, listening for problems and using electrical meters, calibration equipment, mobile and handheld computer systems, hand tools, PLC, operator interface, data collection, and safety-related control systems., • Remove and replace defective parts by properly dismantling devices using hoists, cranes, and hand and power tools, examining form and texture of parts., • Maintain a safe and clean working environment by complying with company procedures, rules, and regulations. Qualifications • Electrical Engineering Bachelors degree or a combination of a relevant certificates, Associate or Technical degree and 4-5 years of relevant work experience., • Must possess sufficient manual dexterity to operate tools, machinery and repair equipment and lift at least 40 pounds unassisted., • Ability to walk, stoop, kneel, crouch, crawl, and climb up/down ladders and stairs, including on uneven, moving, or slippery surfaces., • Selfmotivated and capable of working independently and as part of a team., • Ability to remain focused, composed, and effective in highpressure or stressful situations., • Demonstrates a strong sense of responsibility and ownership, consistently taking proactive action in tasks, assignments, and unexpected situations., • Ability to obtain a TWIC card (Transportation Worker Identification Credential). Skills & Competencies • Knowledge of low voltage and line voltage AC and DC systems and relays, high voltage experience including terminations a plus., • Basic hydraulic and machine repair knowledge a plus., • Excellent written and verbal communication skills Electrical/Mechanical aptitude, advanced skills in one or more of the following areas a plus: software, electronics, low and high voltage electrical, mechanical and propulsion systems, automation, PLC programming, Ethernet network/Serial communication., • Ability to read Schematics., • Ability to write reports, effectively present information and respond to questions from groups of managers, clients, and customers., • Proficiency in installation, troubleshooting, and commissioning., • Ability to collaborate with clients and ensure timely service delivery., • Must be an avid user of computer software including Microsoft Office. Working Conditions • Working conditions are marine/industrial environments which require the use of company uniform and safety equipment, to include but not limited to safety glasses, hearing protection, steel toe work boots, hardhat and safety vests., • Comfortable working aboard vessels, in confined spaces, and in challenging environmental conditions including rain, ice, snow, wind, heat, and other weather extremes., • Available to work flexible, on-call hours, including varying and unpredictable shift schedules., • Regular local travel with occasional international trips as required. Other • Must be able to pass a drug screening and background check upon request for customer site access. A clean driving record is required., • As our business and operations evolves to meet changing market needs, team members are expected to adapt seamlessly and undertake additional essential projects and tasks when required. Compensation & Benefits LD power automation provides competitive compensation and benefits to acknowledge employees contributions. Base pay is determined by job-related knowledge, skills, experience, location, and internal equity considerations: • 401(k)/Employer Matching, • Health, Dental, and Vision Insurance, • Paid Time Off

Job DescriptionCompany Description Working Location: Ridgefield Park, NJ Contract Period: ASAP - 1 year Pay rate: $9,000/M DOE Bilingual (Korean and English) required We are seeking an experienced DevOps Engineer to assist with the maintenance, development, and implementation of one of our Intranet systems. The candidate must have a solid development background across multiple technical disciplines including J2EE web application development, Java client/server development, and Database Development. Job Description • 9+ years in DevOps, web based related system development including Java experience in developing or maintaining intranet systems., • Experienced Java Developer with either knowledge in the following areas; Full J2EE stack, RIA framework, Spring, iBatis/Hibernate/JPA, Java, JDBC, JSP/Servlet, Web Services, JMS, etc., • Experience with either applications servers: WebLogic, JBoss, Tomcat, or Sun One J2EEWAS, • Experience with HTML/DHTML, jQuery/JSON, Java Script, AJAX, • Experience with Database modeling with RDBMS (Oracle, MS SQL, Maria DB, Etc.), • Experience with RDBMS store procedure & function development, • Experience with multiple Server Operating System: UNIX, Linux, Windows server Qualifications Bachelor’s degree in Computer science or related discipline with an information technology focus • API development experiences are plus, • ETL development experience with ETL Tools (Alteryx, Oracle Data Integrator, MS SQL SSIS, etc.) preferred, • BI reporting tool (Tableau, MS Power BI, etc.) development experiences are preferred, • Working with Samsung Global Systems such as Next ERP/GSCM preferred, • Full lifecycle of ETL implementation understanding preferred (analysis, architecture, design, development, data extraction, staging and storage, transformation, presentation, testing, cutover/go-live planning), • Bilingual (Korean and English) required Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description The Role We are looking for a Senior Project Engineer to provide comprehensive applications/project engineering support for our distributed energy and microgrid projects. Our projects typically include managing a variety of DER and microgrid assets such as solar, energy storage, controls, and reciprocating engines. You will report to our VP of Project Engineering and Preconstruction and will work a hybrid schedule out of one of our offices in Ridgewood, NJ, NYC, Oakland, CA, or Santa Monica, CA. Key responsibilities will include: • Utilize your strong technical and communication skills to interface with all aspects of the business and customers., • Work extensively with our execution (project management) team to deliver turn-key solutions for our customers within budget and per schedule., • Work with the business development, execution, and commercial teams on specific projects to ensure the integration of the microgrid is technically correct, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones, to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes modifications to existing design concepts that are applicable for each site., • Work with switchgear manufacturers and other equipment OEMs to develop innovative designs and costing that are scalable to many jobs and customer sites. This includes working at voltage levels of 23kV, 3.8kV, 4.16kV, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Directly manage engineering consultants in the preparation of detailed engineering and construction drawings and specifications for 30%, 60%, 90% Issue for Permit, and 100% Issue for Construction drawing packages. The Ideal Candidate • 7+ years of experience in the design and construction of power/generation/renewable energy projects, • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines, • Understanding of rotating power with reciprocating engines in the 200 to 2000 kW size range per engine. This includes parallel operation with the utility as well as with other DERs, both in grid parallel and island mode operations., • Solid understanding of the utility side of the interconnection., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide the most efficient system., • Knowledge of emissions from the utility side, as well as each of the DERs., • Knowledge of systems controls for all the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to the customer and us., • Experience in submitting interconnection applications, reviewing Utility studies, which may include Detailed Studies, Facility Studies, and System Impact Studies., • Excellent communication skills, including the ability to communicate with technical and non-technical people to make projects work., • AutoCAD experience (for creating conceptual one-line diagrams and site layouts), • BS in Electrical Engineering with a focus on the power side, • PE in power or progressing towards that license, • Advanced courses in power or a higher-level degree in the field are preferredDER work electrical background - mechanical is ok, as long as they've done electricaldeep into the engineering of the projects - managing EORs doing the engineering role - not just the analytics - made selections on gear and breaker sizes - they know how to build it. Solar if they've done the electrical side in depthBess and gens even betterAll the PE do the interconnection applications part flex on east or west, not remote; in office Interview: Ryan, Justin/Steve, Tina, case study/in person; deepa/Neil/Steph This is a great opportunity to have a long-term impact on a fast-paced, private equity-backed growth business. Some of the core virtues embraced by Scales’ employees include: · Do the Right Thing· Act Like an Owner· Hustle· Demand Results· Go Together· Evolve or Disappear We offer a competitive compensation package and a comprehensive benefits program including medical benefits, paid vacation and holidays, and 401K matching. About Scale Microgrids Scale is redefining resilience, with advanced microgrids that go beyond traditional backup power solutions to give businesses the power to adapt and thrive amid all of today’s growing energy challenges. As a vertically-integrated provider of turnkey advanced microgrid systems, Scale combines project design, engineering, and execution expertise with microgrid-as-a-service financing to offer our customers systems that are optimized to deliver maximum value from day one while ensuring ultra-reliable operations and fast time-to-power. Scale is backed by EQT, a firm with ~$250B in assets, bringing a depth of experience, resources, and capital that will enable Scale to continue pursuing our vision of powering the world with distributed energy. The investment enables Scale to own and operate billions of dollars in distributed generation assets. To learn more about Scale Microgrids, please visit https://www.scalemicrogrids.com. About EQTEQT is a leading purpose-driven global investment organization with EUR 246 billion in total assets under management, divided into two business segments: Private Capital and Real Assets. EQT owns portfolio companies and assets in Europe, Asia Pacific, and the Americas and supports them in achieving sustainable growth, operational excellence, and market leadership. To learn more about EQT, please visit https://eqtgroup.com. Scale strives to attract and retain a workforce that reflects the composition of our customer base and communities. We are committed to providing a work environment that provides everyone with equal access and opportunity to contribute and drive meaningful outcomes. We encourage applicants from all backgrounds to apply and will consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Sr Data Center Commissioning Engineer (Electrical) - Remote This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $165,000 per year A bit about us: We are an international conglomerate, with 10k+ employees, we are growing our Energy practice throughout the US and beyond! Our practice is built on the foundation that our people mean more to us than anything else! What that means for you, is that we expect you to enjoy a work life balance that promotes personal health, well being and family life! You will be part of a close-knit team of creative professionals and will be provided opportunities for continued growth, development, and recognition. Why join us? • Competitive Base Salary!, • Competitive Bonus Package!, • Overtime Pay, • 401K Matching Contribution, • Flexible/Unlimited PTO, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities! Job Details Sr Data Center Commissioning Engineer (Electrical) - Remote Successful candidates will have experience in Electrical Systems & Equipment with a focus in Data Centers and Mission Critical Facilities; experience and an understanding of Building MEP Systems Design, Construction, and Commissioning of Critical Systems ranging in size, rating, and complexity; Commissioning, Testing and Troubleshooting of Electrical Systems and related controls. You will be responsible for reviewing project information, executing daily field activities, maintaining project documentation, assisting the Project Manager, and providing guidance to junior engineers. QUALIFICATIONS • BSc/MSc in Electrical Engineering OR 4+ years of Mission Critical / Data Center experience, • PE, EIT, CBCP Preferred, Not Required., • 5+ yrs of experience Commissioning Electrical Systems for Data Center projects, or relevant and applicable industry experience. SKILLS • Experience in Mission Critical facility commissioning essential, • Organized, detail-oriented, analytical, proactive, problem solver, • Good communication and relationship skills, • Effective written and verbal communication skills, • Ability to manage multiple tasks simultaneously and work with limited supervision, • Knowledge & experience with ASHRAE commissioning guidelines preferred, • Distributed control system experience a plus, • Reasonable understanding of Building Management Systems, • Deep understanding and application of test instrumentation, • Team player and a “client-first” mentality. DUTIES • Commission electrical distribution equipment and related controls, primarily in data center environments, including HV and MV primary distribution, • Review system designs for compliance with client facility goals, • Prepare plans and procedures for execution of the commissioning process, • Conduct commissioning activities from the Design Phase into the Occupation Phase, in accordance with client requirements, • Attend factory testing of equipment and document procedures and results, • Conduct physical testing of electrical equipment and measure results using test instrumentation, • Fully document all field procedures, including results, issues, and observations using online applications, • Report on electrical system performance and make technical recommendations on issues, • Work with project teams to coordinate and execute field activities., • Review and comment on project documentation, plans, and schedules, • Submit and maintain daily commissioning reports as required, • Assist in the training of junior engineers, • Respond to customer inquiries in a manner that exceeds the customer’s expectations, • Ensure compliance with company, client, and project safety requirements, • Knowledgeable with common mechanical, and controls-related building equipment, including: Engine generators / Uninterruptible power supplies & battery systems / Medium and low-voltage electrical switchgear/ PLC controls and sequences of operations / Automatic transfer switches / Static transfer switches / Power distribution units / Busways, • Grounding Systems. BENEFITS: • Competitive Salary – 10% Annual Bonus Opportunity – Over Time Pay – Flex Paid Time Off – Full Healthcare Coverage – 401K with Matching Contribution IMPORTANT NOTICE This is Strictly a Building Engineering position focused on Data Center Commissioning of Electrical Systems and Facility Operations. The firm Does NOT Hire for Any I.T. positions. Applicants Seeking IT-related opportunities Should NOT Apply.. Thank you for your understanding. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionFacilities Maintenance Technician | Multi-Location | Full-TimeLocation Northern New Jersey Compensation Competitive Hourly Pay + Mileage Reimbursement + Benefits $22 to $28 per hour based on experience Join a Growing Multi-Location Organization We are seeking an experienced Facilities Maintenance Technician to support multiple locations throughout the region. This position is ideal for a skilled maintenance professional who enjoys working independently, solving problems, and performing a wide variety of building repairs and facility maintenance tasks. You will travel between locations ensuring our facilities remain safe, functional, professional, and well-maintained. If you have experience in building maintenance, commercial maintenance, property maintenance, field service, or general handyman work, we encourage you to apply. Responsibilities Perform general building maintenance and repairs Troubleshoot plumbing, electrical, carpentry, drywall, flooring, and painting issues Conduct routine facility inspections Complete preventive maintenance tasks Repair doors, locks, fixtures, furniture, and equipment Install and assemble office furniture and equipment Coordinate repairs with outside vendors and contractors Respond to maintenance requests in a timely manner Maintain maintenance records and work orders Identify and correct safety concerns Travel between multiple locations daily Qualifications 4+ years of maintenance, facilities, building, property, or handyman experience Knowledge of electrical, plumbing, carpentry, drywall, painting, and general repairs Strong troubleshooting and problem-solving skills Experience using hand tools and power tools Ability to work independently and manage multiple priorities Strong communication and organizational skills Valid driver's license Reliable transportation Ability to travel between locations throughout the region Preferred Qualifications Commercial facilities maintenance experience Multi-site maintenance experience HVAC troubleshooting experience Experience with work order management systems Spanish or Russian language skills Benefits Competitive hourly compensation Mileage, gas, and toll reimbursement Company-provided tools and supplies Health, dental, and vision insurance 401(k) with company match Paid time off Paid holidays Stable full-time schedule Career growth opportunities Supportive team environment Schedule Full-Time Monday-Friday Regional travel required Keywords Facilities Maintenance Technician, Building Maintenance Technician, Maintenance Technician, Handyman, Property Maintenance Technician, Commercial Maintenance Technician, General Maintenance Technician, Field Service Technician, Facilities Technician, Building Engineer, Maintenance Mechanic, HVAC Technician, Electrical Maintenance, Plumbing Maintenance, Carpentry, Preventive Maintenance.

Job DescriptionJob Title: Electrical Design Engineer – Power Distribution (Switchboards & Panelboards) Job Location: Kearny, NJ In-Office, Hybrid or Remote: On-site Working Hours: Full-time Languages: English required What the Client Offers: Salary: USD $110,000 – $130,000 Comprehensive benefits package Paid time off + 10 company holidays Tuition reimbursement 401(k) with strong employer contribution Stable, growth-oriented environment within a specialized engineering sector Relocation support available for the right candidate About the Client: Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical industries including energy, telecommunications, and industrial systems, delivering high-performance, safety-compliant solutions. Role Overview: Our client is seeking a detail-oriented Electrical Design Engineer to design low voltage switchboards and panelboards. This role is based in the Kearny, NJ area, with relocation support available for the right candidate. You will play a key role in developing complex electrical systems and collaborating with cross-functional teams to bring designs from concept to production. Key Responsibilities: Design low voltage switchboards and panelboards in compliance with applicable standards and regulations Create 3D sheet metal components and flat patterns Develop complex 3D assemblies with large multi-component BOMs Produce wiring diagrams including PLCs, relays, breakers, and power systems Generate 2D drawings including layouts, single-line diagrams, and front views Collaborate with engineering, manufacturing, and vendors to ensure accurate execution Translate client requirements into practical and efficient design solutions Qualifications:Required: Bachelor’s degree in Mechanical or Electrical Engineering (or related field) 3 to 5 years of experience in an electro-mechanical or similar environment Strong proficiency in 2D and 3D CAD software (Autodesk preferred) Solid understanding of electrical systems and design principles Strong communication and collaboration skills Preferred: Experience with UL standards (UL891, UL67, UL508A, UL1558) Familiarity with the National Electrical Code (NEC) Experience sizing conductors and overcurrent protection devices (OCPDs) Knowledge of control circuits and electrical logic

A leading educational institution is seeking a contract systems engineer in Brooklyn for a 6-9 month engagement, potentially transitioning to full-time. Candidates should have 5-10 years of experience and a relevant degree in engineering, along with strong skills in PCB design.

Hiring experienced Project Engineers and Project Managers. Must be experienced in field engineering, cost control, RFI's, QAQC, CPM scheduling software.

This position is ideal for a seasoned engineer who thrives in solving complex technical challenges, contributes to system design decisions, and delivers reliable, scalable software with a high degree of autonomy. Write clean, maintainable, and production‑ready code aligned with established enginee

American Dream is home to leading attractions, including DreamWorks Water Park, Nickelodeon Universe Theme Park, LEGOLAND Discovery Center, SEA LIFE Aquarium, Big SNOW Ski Hill, Dream Wheel a 300-foot observation wheel overlooking the NYC skyline, as well as attractions debuting soon such as The Ga

Proficiency with mechanical systems and PM execution. Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems.

Building Maintenance Technician.Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns.M

OEM training on balers, conveyors, or processing systems.

Job Title: Residential Property Handyperson.Rose Associates is a recognized market leader in multifamily and mixed-use real estate.Based in New York City, we own, develop and operate leading properties in urban markets from Philadelphia to Boston and across all residential asset classes, including m

Commercial Maintenance Technician - Part Time.We are an equal employment opportunity employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic prot