Premium experience manager jobs in Edison, New JerseyCreate job alerts

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.). Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment

6098 - Edison - 1015 US Route 1, Edison, New Jersey, 08817 CarMax, the way your career should be! CarMax is now hiring Fleet Drivers! Start loving what you do at CarMax Delivering satisfaction, every day At CarMax, we’re not just moving vehicles—we’re moving an industry forward. As a Fleet Driver, you’ll play a key role in transporting our vehicle inventory across our logistics network while representing a company known for integrity and safety. We value our drivers and provide consistent schedules, competitive pay, and routes designed to get you home daily. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount and more! What you will do – Essential responsibilities • Safely load, secure, transport, and offload CarMax vehicles between stores, auctions, vendors, and logistics hubs using a company-assigned car hauler., • Ensure timely and accurate delivery of vehicles to support inventory movement and customer satisfaction, • Operate equipment with a strong focus on safety, efficiency, and cleanliness, maintaining a well-kept truck and trailer., • Conduct thorough pre-trip and post-trip inspections of assigned equipment in accordance with DOT and CarMax standards, • Maintain accurate and compliant DOT logs and documentation, • Represent CarMax professionally with vendors, store associates, and the general public Be part of the team that’s driving up standards At CarMax, Fleet Drivers are trusted professionals who keep our operations moving smoothly and safely. You’ll play a vital role in our logistics network, helping ensure the right vehicles are where they need to be—on time and ready for our customers. This is more than a driving job; it's an opportunity to represent a brand built on trust, teamwork, and doing the right thing, every time. Qualifications and requirements • Valid state-issued commercial driver’s license Class A (CDL) Required., • 2+ years Class A CDL Driving experience required. Military (Heavy/Medium Tactical Vehicle) driving experience will be considered., • In lieu of having Class A CDL Driving experience, current CarMax Associates are eligible to apply when they have met the following criteria:, • A valid state-issued Class A Commercial Driver’s License (CDL), • 2+ years of Commercial Motor Vehicle (CMV) driving experience at CarMax – non-Class A CMV experience is acceptable, • No preventable safety incidents in the past 2 years (validated by the Safety & Compliance Team), • Clean driving record with no serious violations in the past three years; candidates must meet CarMax’s Driver Safety Evaluation criteria., • Ability to meet DOT & FMCSA qualification requirements., • Lift heavy objects and winch transported vehicles during the loading process., • Proficiency in operating a 10-speed transmission., • Willingness to work outdoors in various weather conditions., • Good communication skills. The hourly rate for this position is: $28.60 - $48.70 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our ___ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6098 - Edison - 1015 US Route 1, Edison, New Jersey, 08817 CarMax, the way your career should be! CarMax is now hiring Fleet Drivers! Start loving what you do at CarMax Delivering satisfaction, every day At CarMax, we’re not just moving vehicles—we’re moving an industry forward. As a Fleet Driver, you’ll play a key role in transporting our vehicle inventory across our logistics network while representing a company known for integrity and safety. We value our drivers and provide consistent schedules, competitive pay, and routes designed to get you home daily. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount and more! What you will do – Essential responsibilities • Safely load, secure, transport, and offload CarMax vehicles between stores, auctions, vendors, and logistics hubs using a company-assigned car hauler., • Ensure timely and accurate delivery of vehicles to support inventory movement and customer satisfaction, • Operate equipment with a strong focus on safety, efficiency, and cleanliness, maintaining a well-kept truck and trailer., • Conduct thorough pre-trip and post-trip inspections of assigned equipment in accordance with DOT and CarMax standards, • Maintain accurate and compliant DOT logs and documentation, • Represent CarMax professionally with vendors, store associates, and the general public Be part of the team that’s driving up standards At CarMax, Fleet Drivers are trusted professionals who keep our operations moving smoothly and safely. You’ll play a vital role in our logistics network, helping ensure the right vehicles are where they need to be—on time and ready for our customers. This is more than a driving job; it's an opportunity to represent a brand built on trust, teamwork, and doing the right thing, every time. Qualifications and requirements • Valid state-issued commercial driver’s license Class A (CDL) Required., • 2+ years Class A CDL Driving experience required. Military (Heavy/Medium Tactical Vehicle) driving experience will be considered., • In lieu of having Class A CDL Driving experience, current CarMax Associates are eligible to apply when they have met the following criteria:, • A valid state-issued Class A Commercial Driver’s License (CDL), • 2+ years of Commercial Motor Vehicle (CMV) driving experience at CarMax – non-Class A CMV experience is acceptable, • No preventable safety incidents in the past 2 years (validated by the Safety & Compliance Team), • Clean driving record with no serious violations in the past three years; candidates must meet CarMax’s Driver Safety Evaluation criteria., • Ability to meet DOT & FMCSA qualification requirements., • Lift heavy objects and winch transported vehicles during the loading process., • Proficiency in operating a 10-speed transmission., • Willingness to work outdoors in various weather conditions., • Good communication skills. The hourly rate for this position is: $28.60 - $48.70 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our ___ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6098 - Edison - 1015 US Route 1, Edison, New Jersey, 08817 CarMax, the way your career should be! CarMax is now hiring Fleet Drivers! Start loving what you do at CarMax Delivering satisfaction, every day At CarMax, we’re not just moving vehicles—we’re moving an industry forward. As a Fleet Driver, you’ll play a key role in transporting our vehicle inventory across our logistics network while representing a company known for integrity and safety. We value our drivers and provide consistent schedules, competitive pay, and routes designed to get you home daily. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount and more! What you will do – Essential responsibilities • Safely load, secure, transport, and offload CarMax vehicles between stores, auctions, vendors, and logistics hubs using a company-assigned car hauler., • Ensure timely and accurate delivery of vehicles to support inventory movement and customer satisfaction, • Operate equipment with a strong focus on safety, efficiency, and cleanliness, maintaining a well-kept truck and trailer., • Conduct thorough pre-trip and post-trip inspections of assigned equipment in accordance with DOT and CarMax standards, • Maintain accurate and compliant DOT logs and documentation, • Represent CarMax professionally with vendors, store associates, and the general public Be part of the team that’s driving up standards At CarMax, Fleet Drivers are trusted professionals who keep our operations moving smoothly and safely. You’ll play a vital role in our logistics network, helping ensure the right vehicles are where they need to be—on time and ready for our customers. This is more than a driving job; it's an opportunity to represent a brand built on trust, teamwork, and doing the right thing, every time. Qualifications and requirements • Valid state-issued commercial driver’s license Class A (CDL) Required., • 2+ years Class A CDL Driving experience required. Military (Heavy/Medium Tactical Vehicle) driving experience will be considered., • In lieu of having Class A CDL Driving experience, current CarMax Associates are eligible to apply when they have met the following criteria:, • A valid state-issued Class A Commercial Driver’s License (CDL), • 2+ years of Commercial Motor Vehicle (CMV) driving experience at CarMax – non-Class A CMV experience is acceptable, • No preventable safety incidents in the past 2 years (validated by the Safety & Compliance Team), • Clean driving record with no serious violations in the past three years; candidates must meet CarMax’s Driver Safety Evaluation criteria., • Ability to meet DOT & FMCSA qualification requirements., • Lift heavy objects and winch transported vehicles during the loading process., • Proficiency in operating a 10-speed transmission., • Willingness to work outdoors in various weather conditions., • Good communication skills. The hourly rate for this position is: $28.60 - $48.70 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our ___ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6098 - Edison - 1015 US Route 1, Edison, New Jersey, 08817 CarMax, the way your career should be! CarMax is now hiring Fleet Drivers! Start loving what you do at CarMax Delivering satisfaction, every day At CarMax, we’re not just moving vehicles—we’re moving an industry forward. As a Fleet Driver, you’ll play a key role in transporting our vehicle inventory across our logistics network while representing a company known for integrity and safety. We value our drivers and provide consistent schedules, competitive pay, and routes designed to get you home daily. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount and more! What you will do – Essential responsibilities • Safely load, secure, transport, and offload CarMax vehicles between stores, auctions, vendors, and logistics hubs using a company-assigned car hauler., • Ensure timely and accurate delivery of vehicles to support inventory movement and customer satisfaction, • Operate equipment with a strong focus on safety, efficiency, and cleanliness, maintaining a well-kept truck and trailer., • Conduct thorough pre-trip and post-trip inspections of assigned equipment in accordance with DOT and CarMax standards, • Maintain accurate and compliant DOT logs and documentation, • Represent CarMax professionally with vendors, store associates, and the general public Be part of the team that’s driving up standards At CarMax, Fleet Drivers are trusted professionals who keep our operations moving smoothly and safely. You’ll play a vital role in our logistics network, helping ensure the right vehicles are where they need to be—on time and ready for our customers. This is more than a driving job; it's an opportunity to represent a brand built on trust, teamwork, and doing the right thing, every time. Qualifications and requirements • Valid state-issued commercial driver’s license Class A (CDL) Required., • 2+ years Class A CDL Driving experience required. Military (Heavy/Medium Tactical Vehicle) driving experience will be considered., • In lieu of having Class A CDL Driving experience, current CarMax Associates are eligible to apply when they have met the following criteria:, • A valid state-issued Class A Commercial Driver’s License (CDL), • 2+ years of Commercial Motor Vehicle (CMV) driving experience at CarMax – non-Class A CMV experience is acceptable, • No preventable safety incidents in the past 2 years (validated by the Safety & Compliance Team), • Clean driving record with no serious violations in the past three years; candidates must meet CarMax’s Driver Safety Evaluation criteria., • Ability to meet DOT & FMCSA qualification requirements., • Lift heavy objects and winch transported vehicles during the loading process., • Proficiency in operating a 10-speed transmission., • Willingness to work outdoors in various weather conditions., • Good communication skills. The hourly rate for this position is: $28.60 - $48.70 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our ___ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs. Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2 nd shift - 3:00 pm to 11:30 pm

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00 pm to 11:30 pm

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime. Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift 3:00pm to 11:30pm

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Coordinator, Shipping & Receiving Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Warehouse Shipping and Receiving Coordinator primary responsibility is to receive, store, and distribute material and products within the Warehouse. This person clerk is also responsible for ensuring that all shipping documents are completed accurately and in a timely fashion in conjunction with other assigned office functions. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Assist shipping and receiving, unloading trucks, checking in merchandise, matching purchase orders to sales orders, COA, Bill of Lading, packing slips., • Communicate with the supply chain and QA department if orders are incorrect, • Prepare products to be shipped out, verify labels, generate packing slip and bill of lading, • Reading customer orders, work orders, shipping orders, or requisitions to determine items to be moved, gathered, or distributed and/or shipped., • Systematically verifying all P.O.’s are completed and received during and by the end of work day., • Answering phone calls relating to checker P.O.’s and other various receiving related circumstances., • Reporting any and all issues to management and Department Lead to be re-verified i.e. P.O. discrepancies, systematic discrepancies etc., • Moving materials and items from receiving or storage areas to shipping or to other designated areas., • Sorting and placing materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code., • Filling requisitions, work orders, or requests for materials or other stock items and distributes items to shipping or to designated route driver storage area., • Work with carriers to obtain freight quotes on shipping outgoing product, • Ensuring warehouse is accessible and safe for associates and customer traffic., • Assembling customer orders from stock and place orders on pallets or shelves, or relocating orders to a holding area or shipping department., • Marking materials with identifying information using appropriate method., • Recording amounts of materials or items received or distributed via SAP, Excel or Word, • Assisting in counting of physical inventory., • Weighing and counting items for distribution within plant to ensure conformance to company standards., • May be assigned facilities maintenance duties as needed., • Completing requisition forms to order supplies from other departments., • Preparing parcels for mailing., • Sweeping, dusting, and mopping., • Organizing warehouse and work area for orderliness at all times., • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Valid truck driving license and no recent moving or driving violations, • Must pass forklift certification process (both written and driving tests) Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior forklift driving and ticketing experience helpful, • Must pass forklift certification process (both written and driving tests), • Ability to write routine reports and correspondence, • Strong organizational skills and an attention to detail required., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift 7.00 am to 3.30 pm

Job Description Reports to: Accounts Payable Manager FLSA Status: Non-Exempt About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position will be responsible to support the functions of maintaining financial records in Visual, accounts receivable and accounts payable. Specific tasks include receivables collection, payment of invoices and statements, processing checks for payment, bank reconciliations and cash applications. May receive assistance from the Accounting Administrator for handling specific tasks and issues. Key Responsibilities: Accounts Payable, Accounts Receivable process and track vendor invoices; • Process A/P and complete 3-way match, • Data entry of invoices, • Update vendor records and maintain vendor files, • Operates computers programmed with accounting software to record, store, and analyze information., • Checks figures, posting and documents for current entry, mathematical accuracy and proper codes., • Debits, credits and totals accounts in computer spreadsheets and databases, using specialized accounting software., • Complies with federal, state, and company policies, procedures and regulations., • Complies, statistical, financial, accounting or auditing reports and tables pertaining such matters as cash receipts, expenditures, accounts payable and profits and losses., • Codes documents according to company procedures., • 2-3 Years Accounting Experience, • Required High School Graduate, Preferred Associates Degree in Accounting., • Independent with the ability to work and troubleshoot., • Excellent communication skills, ability to communicate clearly and concisely, verbally and in written format., • Attention to detail, • Professional demeanor, excellent interpersonal and customer service skills, • Team Player, • Dedication to accuracy, • Strong organizational and time management skills, • Ability to perform several tasks concurrent with ease and professionalism. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions of this job. • Must be able to sustain office work, this is a largely sedentary role, however some filing is required, this would require the ability to lift files, open file cabinets and bend to file as needed., • Additional physical qualifications are as follows:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Office environment is of moderate noise level. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, New Brunswick, NJ Title Material Handler Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Material Handler will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. Responsible for transporting goods from one place to another using heavy or tractor-trailer trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks, SAP or RF as needed. It’s a floater position between different locations. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspect vehicles for mechanical items and safety issues and perform preventative maintenance., • Report defects, accidents, or violations., • Plan routes and meet delivery schedules. Collect and verify delivery instructions., • Document and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Comply with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuver trucks into loading or unloading positions, • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • Ensure safety and quality standards are consistently followed., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips and verifying documents are matched, tracking shipments, using SAP and RF as needed., • Ensure safety and quality standards are consistently followed, comply with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck, • Extensive knowledge of applicable truck driving rules and regulations, • Valid truck driving license and no recent moving or driving violations, • Ability to drive long hours and travel regularly, • Extensive knowledge of applicable truck driving rules and regulations, • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Must have ability to lift heavy items up to 70 pounds. Must be able to load and unload heavy objects in and out of vehicle, requiring upper body strength and physical stamina., • Work is regularly performed in a truck cab with exposure to hot and cold weather and driving conditions influenced by rain and snow. Employees are exposed to environmental odors, noise, and fumes, etc. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift: 3:00 PM - 11:00 PM

Job Description Job Description Date 02/2024 Location 1300 Airport Road, North Brunswick NJ Title Lead, Quality Control Chemist Department Quality Control Reports to Manager, Quality Control Laboratory FLSA (Exempt or Non-Exempt Exempt Role Overview The Lead, QC Chemist performs specific routine analysis of samples of raw materials, in process, and finished products according to established (official and/or in-house) test procedures. Testing assesses the strength, identify, purity of the test samples and/or raw materials. The Chemist prepares reagents, standards, and solutions and may monitor and verify quality in accordance with statistical process and other control procedures. The Chemist maintains & organizes testing’s and compliance while working in a fast-paced environment with changing priorities. Areas of Responsibility • Performs assigned sampling, physical, chemical tests and assay on raw materials, active dietary ingredients, in-process, finished, and stability products in an FDA regulated lab environment. Uses a variety of wet chemicals, physical and instrumental techniques as well as routine QC instruments HPLC, GC, IR, Auto Titrator, Bulk Density, UV Spectrophotometer, Dissolution, Karl Fisher (KF), Potentiometer., • Troubleshoots HPLC, GC, QC instruments for specific tests in order to assist in determining the root cause of aberrant results and help in performing Lab investigations / OOS., • Evaluates daily raw data sheets for product samples and release, if needed., • Coordinates annual review of STPS / SOPS as per USPL procedures., • Prepare new methods and test procedures for new or existing raw materials and finished products., • Ensures compliance with company and customer specifications as well as federal, state and local regulatory requirements., • Perform floor supervision of QC Chemists for routine testing, if required., • Prepares and reviews QC related documents during and finishing of testing of sample. Submit all testing related documents like data sheets, chromatograms, spectras, instruments print outs in timely manner to Qc Documentation department to release the batch of raw material / finished product., • Prepares and/or Reviews Test Procedures, SOP's and Protocols as assigned., • Performs maintenance and calibrations of laboratory instruments /equipment, if required to help in-house calibrations., • Assures GMP compliance according to FDA CFR Part 111 and USPL SOPs / guidelines., • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, GLP, documentation) when performing the assigned activity., • Trains new QC Chemists to perform instrumental testing., • Must be able to work extended hours as needed and occasional weekends., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • BS/MS in Chemistry or related scientific disciplines., • Five (5) years of basic chemistry techniques (can be academic) is a plus., • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11., • Strong working knowledge of Microsoft Word, Excel., • Good documentation practices and able to write simple, clear reports., • Meets commitments on time and practices time-management skills., • Seeks to identify continuous improvement needs., • Experience with Shimadzu LC2010, Nexera, GC2010, Thermo ICP-MS, Labsolution and Waters, • Ability to navigate office, lab, and/or plant floor working environments., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • May execute up to 20% of their work at the bench level either standing or sitting on a stool., • Work performed in a standard office environment is without unpleasant or hazardous conditions. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Office Hours: 8:30 AM - 5:00 PM 9:00 AM - 5:30 PM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ 08902 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP’s. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA – Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support • Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes., • Perform In-process checks:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, and disintegration tests etc as applicable, • Verify equipment cleaning and area hygiene as per SOP., • Ensure line clearance before packaging activities., • Perform In-process checks:, • Batch number and expiry date printing, • Label application and carton sealing, • Primary and secondary packaging integrity etc as applicable, • Record observations in IPQA checklists, logbooks, and batch records., • Maintain GMP documentation in real-time (legible and error-free)., • Adhere to company GMP, SOP, and Hygiene policies., • Use PPE appropriately., • Support during internal/external audits by providing necessary records., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) • Carry out and document line clearance activities before starting each manufacturing batch., • Conduct in-process checks independently:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, thickness, and disintegration, • In-process controls as per BMR specifications, • Verify equipment cleanliness status, calibration, and logbook entries., • Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons)., • Perform and document:, • Batch coding verification (batch no., Mfg/Exp date), • Packaging material correctness (labels, leaflets, cartons), • Sealing integrity checks (blisters, induction seals), • Online rejection bin and reconciliation checks, • Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time., • Record IPQA observations and results as per SOPs ( legible and error free)., • Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager., • Ensure compliance with GMP, GLP, and data integrity principles., • Follow gowning protocols, hygiene, and safety measures in production areas., • Assist during internal audits and regulatory inspections by providing accurate documentation and data., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight – Manufacturing & Packaging • Supervise and verify line clearance activities across all manufacturing and packaging areas., • Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs)., • Review and approval:, • In-process checks: weight variation, hardness, friability, disintegration etc as applicable, • Environmental monitoring records, • Equipment and area cleaning records, • Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR)., • Cross-check reconciliation of raw materials and printed packaging materials., • Investigate and document process deviations, non-conformances, and OOS/OOT incidents., • Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA)., • Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.)., • Conduct routine GMP audits, spot checks, and area inspections., • Guide and mentor IPQA Level 1 and Level 2 personnel., • Allocate daily QA responsibilities and monitor adherence to QA procedures., • Conduct on-the-job training for new team members, • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • N/A Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: IPQA – Level 1: • 0–1 year (Freshers with training or internship in QA preferred), • Or equivalent combination of education and experience., • Minimum of 3+ years of experience in a QA Inspector within a nutritional’s supplements, food, consumer products or pharmaceutical company., • Or equivalent combination of education and experience., • 3–5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience., • N/A Skills & Ability IPQA – Level 1: • Basic understanding of GMP, nutraceutical processes, and QA principles., • Good observation and attention to detail., • Willingness to work in production areas (shifts, growing zones)., • Ability to follow instructions and standard procedures accurately., • Basic proficiency in English and documentation practices. IPQA – Level 2: • Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals., • Understanding of basic analytical parameters (weight variation, friability, etc.)., • Good documentation and observational skills., • Proficient in using basic lab and QA tools (weighing balances, disintegration testers)., • Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA – Level 3: • In-depth understanding of nutraceutical manufacturing processes and regulatory compliance., • Proficient in QA documentation, process audits, and deviation handling., • Strong analytical and decision-making skills., • Familiar with QMS tools, GMP documentation, and data integrity principles., • Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. First shift$24.00 to $30.50Second Shift$24.00 to $31.00 3rd shift 11.00 PM to 7:30 PM

Job DescriptionDescription: Position: Marketing Manager Location: New Jersey (Hybrid: 2 days on-site, 3 days remote) Reports to: Chief Growth Officer Type: Full-Time Who We Are: Celerant Technology Corp is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Iselin, New Jersey and, as well as additional offices in Georgia, California, Texas and Turks and Caicos. For more information, visit us at . Overview: We are looking for a dynamic, results-driven Marketing Manager to lead our marketing team, with a strong focus on creative messaging, project management, and lead generation. This role is crucial in developing and executing strategies that enhance brand visibility, engage our target audience, and drive business growth. The ideal candidate has a solid background in both traditional and digital marketing, hands-on experience with HubSpot CRM, and a knack for crafting compelling messaging that converts leads into customers. This position requires someone who thrives in a fast-paced environment, can juggle multiple projects, and adapts quickly to market trends. The Marketing Manager will oversee a team of seven (content writers, digital marketers, and an event coordinator), providing leadership and strategic direction. This is a hybrid role, requiring two days per week in our New Jersey office and the flexibility to work remotely the other three days. Key Responsibilities: Marketing Strategy & Planning: • Develop and execute marketing strategies aligned with business goals., • Conduct market research to identify trends and opportunities., • Lead, mentor, and inspire a team of seven marketing professionals., • Set timelines, oversee projects, and ensure marketing goals are met., • Develop and oversee multi-channel lead generation campaigns., • Utilize HubSpot CRM for lead tracking, optimization, and reporting., • Lead content strategy to support brand awareness and lead generation., • Craft compelling marketing messages that drive engagement and conversions., • Execute a comprehensive communications plan, including PR and internal communications., • Oversee and optimize digital marketing efforts, including email, SEO, PPC, and social media., • Plan and manage client conferences and trade shows in partnership with the event coordinator., • Bachelor’s degree in Marketing, Communications, or Business., • Experience in SaaS technology or retail software is a plus., • 5+ years of experience in marketing and communications, with a proven track record in lead generation., • Proficiency in HubSpot CRM for lead tracking, campaign management, and analytics., • Strong understanding of digital marketing, social media, and content creation with a focus on lead generation., • Exceptional creative writing and messaging skills., • Ability to think strategically while executing tactically., • Strong project management skills with the ability to prioritize multiple tasks and meet deadlines. Salary range is $100,000 - $140,000 depending on experience. To learn more about Celerant and our company’s culture, visit: - Requirements: Qualifications: • Bachelor’s degree in Marketing, Communications, or Business., • Experience in SaaS technology or retail software is a plus., • 5+ years of experience in marketing and communications, with a proven track record in lead generation., • Proficiency in HubSpot CRM for lead tracking, campaign management, and analytics., • Strong understanding of digital marketing, social media, and content creation with a focus on lead generation., • Exceptional creative writing and messaging skills., • Ability to think strategically while executing tactically., • Strong project management skills with the ability to prioritize multiple tasks and meet deadlines., • Experience with marketing tools like Google Analytics and social media management platforms.

Job DescriptionDescription: WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Job Description Job Description Date 12/2025 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Production Department Standard Manufacturing Reports to Manager, Production FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Production Supervisor is responsible for the safety of the production employees, quality of the products, and effective use of all people, time and material in meeting assigned production schedules. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. This position is responsible for planning, coordinating, and managing all production activities of those employees on the floor. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility Production • Ensures that production schedule is met by distributing workload in accordance with changing priorities., • Ensures production operations are properly controlled, and regulatory compliance requirements are met by ensuring the accuracy of batch documentation, Standard Operating Procedures, and critical documentation templates. Also, that equipment is in good repair and current calibration, training is current, and high standards of housekeeping are maintained in all areas of responsibility., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques, • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintains a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories and order production supplies, • Interacts with multiple functions and shifts within the 24/7 operation, • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follows batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing. People • Ensures each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Comply with all job-related safety and other training requirements., • Fosters a collaborative environment in which diverse backgrounds are respected and valued., • Establishes and maintains effective relationship with your peers, team, and senior managers in order to communicate effectively, • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear, • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develops employees that contribute to the daily success of the line and can be successful in the supervisor’s absence, • Maintains open lines of communication with employees, peers, and management, • Assuming responsibility for the efficient, timely, and accurate completion of Production functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed, • Evaluates performance of employees and creating corrective action plans where appropriate, • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers and promotions., • Interprets and explains the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identifies strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny, • Other duties as assigned Requirements Education & Qualification: • BA/BS degree and 3+ years Supervisory experience, • Minimum of three (3) years of work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Knowledge of any of the following processes: Blending/Granulation, Tablet Compression and/or Film Coating, Encapsulation, or Pharmacy/Pre-Weigh Dispensing., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate., • Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. 2nd Shift - 3:00 PM to 11:30 PM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ 08902 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP’s. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA – Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support • Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes., • Perform In-process checks:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, and disintegration tests etc as applicable, • Verify equipment cleaning and area hygiene as per SOP., • Ensure line clearance before packaging activities., • Perform In-process checks:, • Batch number and expiry date printing, • Label application and carton sealing, • Primary and secondary packaging integrity etc as applicable, • Record observations in IPQA checklists, logbooks, and batch records., • Maintain GMP documentation in real-time (legible and error-free)., • Adhere to company GMP, SOP, and Hygiene policies., • Use PPE appropriately., • Support during internal/external audits by providing necessary records., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) • Carry out and document line clearance activities before starting each manufacturing batch., • Conduct in-process checks independently:, • Blend uniformity sampling, • Tablet/capsule weight variation, • Hardness, friability, thickness, and disintegration, • In-process controls as per BMR specifications, • Verify equipment cleanliness status, calibration, and logbook entries., • Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons)., • Perform and document:, • Batch coding verification (batch no., Mfg/Exp date), • Packaging material correctness (labels, leaflets, cartons), • Sealing integrity checks (blisters, induction seals), • Online rejection bin and reconciliation checks, • Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time., • Record IPQA observations and results as per SOPs ( legible and error free)., • Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager., • Ensure compliance with GMP, GLP, and data integrity principles., • Follow gowning protocols, hygiene, and safety measures in production areas., • Assist during internal audits and regulatory inspections by providing accurate documentation and data., • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety: IPQA – Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight – Manufacturing & Packaging • Supervise and verify line clearance activities across all manufacturing and packaging areas., • Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs)., • Review and approval:, • In-process checks: weight variation, hardness, friability, disintegration etc as applicable, • Environmental monitoring records, • Equipment and area cleaning records, • Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR)., • Cross-check reconciliation of raw materials and printed packaging materials., • Investigate and document process deviations, non-conformances, and OOS/OOT incidents., • Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA)., • Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.)., • Conduct routine GMP audits, spot checks, and area inspections., • Guide and mentor IPQA Level 1 and Level 2 personnel., • Allocate daily QA responsibilities and monitor adherence to QA procedures., • Conduct on-the-job training for new team members, • Cleans up work following the completion of a shift., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned, • Other Responsibilities Including Safety:, • N/A Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: IPQA – Level 1: • 0–1 year (Freshers with training or internship in QA preferred), • Or equivalent combination of education and experience., • High School diploma is required; BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA – Level 2: • Minimum of 3+ years of experience in a QA Inspector within a nutritional’s supplements, food, consumer products or pharmaceutical company., • Or equivalent combination of education and experience., • BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA – Level 3: • 3–5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience. IPQA – Level 1: • Basic understanding of GMP, nutraceutical processes, and QA principles., • Good observation and attention to detail., • Willingness to work in production areas (shifts, growing zones)., • Ability to follow instructions and standard procedures accurately., • Basic proficiency in English and documentation practices. IPQA – Level 2: • Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals., • Understanding of basic analytical parameters (weight variation, friability, etc.)., • Good documentation and observational skills., • Proficient in using basic lab and QA tools (weighing balances, disintegration testers)., • Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA – Level 3: • In-depth understanding of nutraceutical manufacturing processes and regulatory compliance., • Proficient in QA documentation, process audits, and deviation handling., • Strong analytical and decision-making skills., • Familiar with QMS tools, GMP documentation, and data integrity principles., • Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM, 2nd shift: 3:00 PM - 11:30 PM and 3rd shift: 11:00 PM - 7:30 AM

Job Description Job Description Date 03/2018 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Warehouse Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview This position is responsible for planning, coordinating, and managing all activities of those employees on the warehouse floor. In addition, the Warehouse Supervisor is responsible for supervising warehouse specialists, order pickers and forklift operators. The Warehouse Supervisor will support the Receiving Clerk in managing the daily freight schedule based on customer and inventory needs. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility Warehouse • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques, • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories, and order production supplies, • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Complete necessary Activity Reports for management., • Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry., • Resolve discrepancies with shipping, invoices, packing slips, and receiver reports., • Ensure products are staged for counting and inspection., • Ensure products are stored properly to conserve space and comply with safety procedures., • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationship with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities. Ensure that the warehouse personnel have safe, efficient equipment in order to perform the distribution functions Education & Qualification: • High school graduate or GED equivalent; BA degree preferred, • 7+ years Supervisory experience, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. @nd shift - 3:00 pm to 11:30 pm

Job DescriptionDescription: Software Support Technician - Entry Level Iselin New Jersey Software Support Technician- Entry Level WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Job Description Sales Enablement Product Manager About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Arculus is a wholly-owned subsidiary of CompoSecure. CompoSecure is a pioneer in the design and manufacture of premium financial cards. Since the creation of the first metal card in 2003, CompoSecure has upheld their mission to change the industry through the evolution of metal cards, with the company's industry-best metal cards in circulation with American Express, JPMorgan Chase, MetaMask, Gemini, and Crypto.com. At the intersection of security, innovation and durability, CompoSecure is committed to elevating customer experiences with best-in-class products. Arculus is an emerging brand of CompoSecure LLC, and a trailblazer for the future of cold storage. In 2021, Arculus launched their three-factor authentication platform that can be used across a variety of industries and use cases to provide enhanced security. It is a digital asset and authentication platform with broad application in areas such as cryptocurrency, payments, secure authentication, gaming, and online banking. The Arculus card is available to both consumer and business clients. The Arculus platform allows users to safely store, swap, and purchase digital assets while maintaining control of their private keys. Additionally, the Arculus card can also act as a FIDO authentication device as well as a 'tap to pay" card. CompoSecure (NASDAQ: CMPO) is headquartered in Somerset, New Jersey with a team of over 1,000 people and growing. 2024 net revenues were $420M, with an Adjusted EBITDA of $151M and a strong growth profile, particularly with the addition of the Arculus product line. Position Overview: We're seeking a Sales Enablement Product Manager. Reporting to the Head of Product, this person will play a pivotal role in growing Arculus products and ensuring they succeed in the marketplace. This role will focus on working with prospects and B2B customers on their needs for crypto self-custody, secure authentication, and crypto/stablecoin payments over traditional card rails and direct on chain. Additionally, this role will have internal operations responsibilities around successful delivery of customer solutions. The Sales Enablement Product Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Drive impact based on customer needs, technical capabilities and business opportunities. Coordinating with internal and external teams on B2B product delivery., • Attend and partner with the sales team at customers meetings (in person and Teams) to identify customer needs and present tailored technical solutions., • Evaluate customer feedback and data to inform product development roadmap, • Design and develop solutions with customers and prospects, • Deliver compelling product demos and presentations that address business pain points and drive conversions., • Assist in RFP/RFI responses, technical documentation, and proposal development., • Build strong relationships with technical stakeholders and decision-makers., • Serve as a subject matter expert on our solutions throughout the sales cycle., • Provide feedback to product and engineering teams based on customer insights., • Support post-sale onboarding to ensure a smooth technical handoff and long-term client success. Qualifications: • A minimum of 3 years (or more) of related experience., • Experience with crypto - cryptocurrencies, stablecoins, blockchains, wallets (custodial and non-custodial), NFTs, and, DeFi., • Experience working with SDKs and being able to work with both business and technical team on successful technical implementations., • Experience working with sales and implementation teams., • Experience with FIDO2 authentication, digital identity, and KYC., • Proven examples of experience in project planning, engagement management, and project pricing., • Contribute to B2B roadmap and strategy., • Highly strategic with proven experience assessing current needs to deliver best-in-class solutions for B2B customers., • You appreciate and can navigate the tradeoffs necessary in evaluating customer requests, • Ability to communicate product concepts and capabilities to prospects and customers, • Ability to travel regularly to customer meetings, • Experience with cryptocurrencies, web3, blockchain, or Fintech is a plus Who you are: • Passionate for the promise of cryptocurrencies and alternative financial services preferred, but ability to recognize that there isn't one right answer and that there are plusses and minuses with both CeFi and DeFi. You need to be able to work with both., • Excellent written, oral and presentation skills, • Analytical with an ability to process data in order to make decisions; someone with a bias to being in the weeds and ensuring successful client delivery, • Creative problem-solver and conceptual thinker with an ability to understand and leverage detail- oriented and analytical issues as needed, • Entrepreneurial drive and the ability to take on goals in a fast paced and innovative environment with rapidly changing priorities, • Strategically minded and always sharpening our message and capabilities for delivering to B2B customers and companies we can partner with to make a stronger product. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: Who We Are: Celerant Technology Corp is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Iselin, New Jersey and, as well as additional offices in Georgia, California and Texas. For more information, visit us at . The Sales Operations Manager is the primary support professional to a team of sales people whose primary responsibility is to qualify and sell solutions. The Sales Operations Manager is a member of the sales team. This position involves a combination of analytical, operational, and strategic responsibilities to drive the overall success of the sales organization. This role calls for an individual with initiative, ability to prioritize and execute in a fast-paced environment, and the ability to manage multiple, complex tasks. An effective Sales Operations Manager will manage and enhance the sales processes, is tech savvy, has excellent written and verbal communication skills, along with distinctive organizational, collaboration, client service skills and provide strategic support. Responsibilities • Work collaboratively with the Sales Manager and Marketing Director., • Track and analyze key metrics including pipeline growth, win/loss rates, and goal achievement., • Maintain the accuracy of sales forecast and sales data., • Collaborate with the other departments such as Marketing, Finance and Operations to ensure alignment with overall business objectives, • Enhance sales productivity by enabling the team to work smarter by simplifying process and evaluating new tools, • Produce and review actionable and accurate sales reporting for reps, managers sales leaders, and executive team, • Build and help to standardize business reporting for strategic analysis and internal business review., • Assist in sales compensation management reporting, • Create internal and external documents to support the sales process (training documentation, meeting notes, marketing and sales collateral, strategic account plans, proposals that address client needs and goals)., • Help coordinate internal training on a regular basis., • Maintain and supervise mentoring program for newly hired sales or junior account representatives, • Attend and participate in sales meetings, occasional trade shows and product sessions Qualifications: • Bachelor's degree in business, marketing, or a related field., • Proven experience in sales operations or a related role., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Familiarity with CRM systems and sales technologies., • Ability to work collaboratively in a cross-functional environment., • Detail-oriented with a focus on continuous improvement., • Willingness to travel (about 10%), • Eagerness to learn and grow with a stable, successful company The Sales Operations Manager is essential in driving the success of the sales team, collaboratively with the Sales Manager, through strategic planning and reporting, ongoing education for the sales staff, process optimization, and effective use of technology. This role requires a combination of analytical skills, business acumen, and the ability to collaborate across various functions within the organization. Compensation: Competitive Salary with major growth potential, medical benefits, 401K, flexible spending account, 15 PTO days annually, optional dental/optical coverage. Salary range is $80,000 - $120,000 depending on experience. - Requirements: Qualifications: • Bachelor's degree in business, marketing, or a related field., • Proven experience in sales operations or a related role., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Familiarity with CRM systems and sales technologies., • Ability to work collaboratively in a cross-functional environment., • Detail-oriented with a focus on continuous improvement., • Willingness to travel (about 10%), • Eagerness to learn and grow with a stable, successful company The Sales Operations Manager is essential in driving the success of the sales team, collaboratively with the Sales Manager, through strategic planning and reporting, ongoing education for the sales staff, process optimization, and effective use of technology. This role requires a combination of analytical skills, business acumen, and the ability to collaborate across various functions within the organization.

Job Description Job Description Date 7/2025 Location 1300 Airport Road, North Brunswick NJ Title Associate, QA Operation Support Department Quality Assurance Reports to Manager, QA Operations FLSA (Exempt or Non-Exempt Exempt Role Overview This position is one of high regulatory responsibility that provides direct quality oversight for the cGMP production of Dietary Supplements and nutraceuticals. This position will help ensure compliance to SOPs, batch records, master manufacturing records, and to 21 CFR Part 111 and 117. Areas of Responsibility Level 1 - Associate, QA Operations Support Summary of the Role: Entry-level position in the QA department focused on supporting sampling and/or dispensing activities under supervision. Intended for fresh graduates or new entrants to the pharmaceutical QA function. ???? Key Responsibilities: • Assist with material sampling and dispensing under guidance., • Support line clearance and hygiene compliance checks., • Label and transport sampled materials as per SOPs., • Maintain basic records and area cleanliness., • Learn cGMP and SOP requirements. Level 2 – Associate, QA Operations Support ???? Summary of the Role: Responsible for performing QA-related sampling and/or releasing , dispensing activities in compliance with SOPs and regulatory requirements. Ensures proper documentation and real-time quality assurance during material handling. ???? Key Responsibilities: • Execute material sampling , releasing , dispensing as per approved procedures as needed., • Perform line clearance and ensure area readiness., • Label materials correctly and ensure segregation of sampled vs. un-sampled., • Maintain logbooks, records, and data entries accurately., • Report deviations or incidents to the coordinator promptly. Level 3 – Associate, QA Operations Support ???? Summary of the Role: Mid-level QA role with responsibility for overseeing sampling and dispensing operations. Ensures compliance, accuracy, and efficiency of all QA activities in the function. ???? Key Responsibilities: • Supervise and coordinate QA sampling releasing , dispensing as per approved procedures as needed., • Review documentation completed by associates., • Ensure timely and compliant execution of sampling plans., • Conduct training and mentoring for junior staff., • Support audits, investigations, and CAPA implementation., • Performs issuance of batch cards of Manufacturing, Coating and Packaging., • Collects samples from on floor production for further testing and retention., • Distributes testing samples to In-house Analytical , Elemental and Microbiology Labs, • Prepares In process Labels for production ,and QA samples to be provided along with the Batch Records Other Responsibilities Including Safety: • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 – Associate, QA Operations Support • B.Sc. / B.Pharm. or equivalent in a science-related field., • Relevant QA experience working within a GMP and/or with GCP regulations. Level 2 – Associate, QA Operations Support • B.Sc. / B.Pharm. (required), • 1–3 years of experience in QA or related area preferred working within a GMP and/or with GCP regulations. Level 3 – Associate, QA Operations Support • B.Sc. / B.Pharm. (minimum); M.Sc. / M.Pharm. preferred, • 3–6 years of relevant QA experience working within a GMP and/or with GCP regulations. Certifications, Licenses, Credentials: • N/A Skills & Ability Level 1 – Associate, QA Operations Support • Willingness to learn and follow instructions., • Basic understanding of GMP (preferred)., • Good observational and documentation skills., • Teamwork and adaptability. Level 2 – Associate, QA Operations Support • Working knowledge of cGMP and SOPs., • Attention to detail and strong documentation habits., • Familiarity with quality systems (e.g., logbooks, traceability)., • Communication and coordination abilities Level 3 – Associate, QA Operations Support • Strong knowledge of cGMP and quality systems., • Leadership and team management skills., • Effective communication and problem-solving., • Ability to handle audits, deviations, and cross-functional coordination., • Good documentation and review capabilities. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM, 2nd shift: 3:00 PM - 11:30 PM and 3rd shift: 11:00 PM - 7:30 AM

Job Description Production Night Manager About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position oversees the management of all related areas of manufacturing to produce products and direct activities for cards and may include other related products. The responsibilities will be all approved products are manufactured on schedule, within the quality standards of the company and customer ensuring cost effective measures are implemented. Will ensure increased level of customer and employee satisfaction while improving efficiency of manpower, materials and equipment. The Production Manager will work onsite 5 days a week out of our office in Somerset, NJ from 6pm - 2:30am. Key Responsibilities: 1. Supervision • Assist senior staff members in the development and formulation of long and short-range planning, policies, programs and objectives., • Manages policy deployment in the areas of lean manufacturing techniques, quality, cost reduction, and on-time delivery., • Identifies, recommends and implements changes to improve productivity and reduce cost and scrap, monitor scrap and rework data. Directs the establishment, implementation and maintenance of production standards., • Hires, trains, develops and evaluates staff. Takes corrective action as necessary on a timely basis and in accordance with company policy. Ensures compliance with current federal, state and local regulations. Consults with Human Resources Department as appropriate., • Directs and monitors department supervisors to accomplish goals of the manufacturing plan consistent with established manufacturing and safety procedures., • Acts as a liaison between department supervisors and subordinate levels, as well as executive/department manager levels to inform personnel of communications, decisions, policies and all matters that affect performance, attitude and results., • Achieves optimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan., • Ensure efficient staffing and equipment utilization of all production equipment., • Ensure production schedule is adhered to and that operators are properly trained to perform their duties in a safe and efficient manner and in accordance with applicable quality standards., • Provides leadership for employee relations through effective communications, coaching, training and development. 2. Production • Responsible for all production of cards., • Ensure job work orders and production schedules are available and properly utilized by all production personnel., • Ensure all operating procedures are aligned with the company's safety and security programs. Maintain and promote safe practices and procedures. Other Important Responsibilities: • Develop an operator cross training program which optimizes labor availability and utilization., • Establish and maintain an operations dashboard of key performance indicators which provides the vehicle for department objectives and improvement initiatives such as process yield, on-time delivery, machine efficiency, etc., • Monitor production performance and make recommendations for improvement., • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 10 years (or more) of relevant experience, • Ability to relate to employees and understand their needs., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent time management skills., • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative., • Excellent problem solving skills., • Proficient in Microsoft Office Suite. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work as needed including the following:, • Sitting/standing as needed, • Computer skills required, • Telephone usage, • Must be able to sustain factory work for 8+ hours per day as required including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • For the most part, the position is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office environment., • Production floor exposure that require the use of personal protective equipment (PPE) ie: safety glasses, hearing protection, gloves etc., • This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machine. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: Position: Updates Deployment Analyst Location: New Jersey/Remote Reports to: Gautham Rajendran – Setup/Updates Department Manager Type: Full-Time Who We Are: Celerant Technology Corp is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Iselin, New Jersey and, as well as additional offices in Georgia, California, Texas and Turks and Caicos. For more information, visit us at . Overview: The Updates Deployment Analyst will be responsible for reviewing, scheduling and performing client software updates in a timely manner. The ideal candidate will be organized and be able to maintain a productive schedule while also being detail-orientated to perform software updates accurately and reliably. The candidate should also be able to communicate clearly to clients and other internal staff members through means of emails, forms, and phone calls, escalating to the department manager as necessary. Key Responsibilities: · Review and schedule client software updates in a timely manner · Follow established processes for documentation and tracking of updates · Provide satisfactory communication with clients to guide them through the updates process · Escalate issues to the technical support team, development team, project manager and department manager as necessary · Responsible for other duties as assigned by manager to meet business needs Qualifications: · Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience · SQL programming and relational database knowledge · Ability to start work at around 7am ET and occasionally earlier as required · Ability to occasionally work late nights and weekends as required · Strong attention to detail and quality of work Preferred Qualifications: · Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred · Experience with retail software or providing technical support in small/medium business applications Bottom of Form Compensation: Competitive Salary with major growth potential, medical benefits, 401K, flexible spending account, 15 PTO days annually, optional dental/optical coverage. Salary range is $40,000-$55,000 depending on experience. Requirements: Qualifications: · Bachelor’s degree in Computer Science, Information Technology, or 5+ years of equivalent experience · SQL programming and relational database knowledge · Ability to start work at around 7am ET and occasionally earlier as required · Ability to occasionally work late nights and weekends as required · Strong attention to detail and quality of work Preferred Qualifications: · Experience with Microsoft SQL Server, Windows Server, Apache Tomcat, and Java is preferred · Experience with retail software or providing technical support in small/medium business applications

Job Description Cybersecurity Manager About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: We're looking for a Manager, Cybersecurity who can run our SOC operations, vulnerability management, DFIR, and security tool health - while also managing our MSSP/MDR partners, running red team engagements, and integrating cyber threat intelligence into daily operations. This is not a checkbox role. You'll be the frontline leader making sure our defenses are sharp, our partners deliver value, and our playbooks are battle-tested. The Cybersecurity Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • SOC & Security Operations, • Run day-to-day SOC ops (monitoring, alert triage, escalation), • Manage MSSP/MDR relationships - hold vendors accountable, ensure quality, and drive outcomes, • Ensure 24/7 coverage through smart playbook design and partner integration, • Vulnerability Management, • Own the vuln management lifecycle: scanning, prioritization, patching, reporting, • Work with IT/DevOps to ensure remediation sticks, not just tickets get closed, • Report enterprise risk posture and trendlines directly to leadership, • Threat Intel & Red Teaming, • Lead coordination of red team and purple team exercises to test resilience and validate controls, • Integrate Cyber Threat Intelligence (CTI) into SOC processes - from IOCs to TTPs, • Run threat hunting campaigns based on MITRE ATT&CK and emerging intel, • Security Tooling & AI/ML, • Deploy and maintain enterprise tools (SIEM, EDR, WAF, scanners, SOAR, etc.), • Ensure tools are tuned, integrated, and delivering value - not shelfware, • Explore AI/ML anomaly detection and automation opportunities to stay ahead of threats, • Digital Forensics & Incident Response (DFIR), • Lead investigations end-to-end - endpoints, servers, cloud, and OT/ICS when needed, • Run tabletops, refine playbooks, and ensure incident readiness, • Mentor analysts in forensics, hunting, and response, • Team Development & Coaching, • Lead the professional growth of SOC analysts and cybersecurity team members through regular coaching, feedback, and development plans. Foster a culture of continuous learning and skill advancement., • Empower team members to take ownership of key initiatives, encouraging autonomy and accountability in daily operations and incident response. Qualifications: • Required, • A minimum of 7 years (or more) in cybersecurity ops, with 3+ in a lead or senior role, • SOC management and vendor/MSSP oversight experience, • Proven vulnerability management success across hybrid environments, • Hands-on with SIEM, EDR, • Solid DFIR skillset: log/memory/packet forensics, endpoint investigations, hunt operations, • Experience coordinating red team engagements and actioning results, • Strong communicator: can brief execs and mentor juniors, • Preferred, • Threat intel analysis and integration experience, • Cloud security ops in AWS/Azure, • Certifications: GCIA, GCFA, GCIH, CISSP, CISM, • Financial services or manufacturing sector experience At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionBenefits: • Commission, • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Donation matching, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Luna Wireless is one of the largest Authorized T-Mobile Retailers in the US! Seeking candidates with a hustle and ambition for unlimited potential. If you want to earn unlimited commissions while working in a fun, fast-paced environment, Luna Wireless is the place to be! Se prefieren hablantes bilinges de espaol, pero no se requieren. Why Join Our Team? #LimitlessPotential #CareerGrowth #ConnectedCulture Be unstoppable with us! Job Overview: The Retail Associate Manager works in partnership with the Store Manager to lead and develop the store team to deliver T-Mobiles aspirations of earning a place in our customers hearts and Mobile Associate success. Job Responsibilities: • Responsible for infusing every stores Mobile Associate s with a passion for T-Mobiles Manifesto by thoroughly orienting and grounding them to a standard of Loving Our Customers., • Ensure that every need the customer has, when coming into the store, is met and that employees build the customers confidence by making their experience comfortable, simple and by solving the whole problem., • Complete observations of Mobile Associate s interactions with customers, including feedback, to be used in development, training & coaching conversations., • Effectively manage customer wait time. Keep current on products, services, and promotions., • Lead by example, staying up to date on the latest products, services, training, and leadership best practices to remain an expert resource to the team. Interact directly with Mobile Associate s to ensure they meet and/or exceed defined, monthly success measurements completing assigned training on time., • Assist in maintaining the quality of the overall store environment and adhere to national plan-o-gram standards. Use visual displays and interactive devices effectively. Keep visual displays and devices current. Assist in the execution of Retail Methods & Procedures., • 1 year customer service and/or sales experience, retail environment preferred, • Available to work a varied schedule including nights, weekends, and holidays, • Ability to lead and mentor people to deliver great results, • Competitive base pay, plus commissions, • Benefits for part-time and full-time employees, • Medical, dental and vision benefits, • 401K Plan, • Generous paid time-off programs, • Phone service discounts, • Serious growth potential for your career Requirements: • At least 18 years of age, • Legally authorized to work in the United States, • High School Diploma or GED #NeverStopGrowing Luna Wireless doesnt have a corporate ladderits more like a jungle gym of possibilities! We love helping our employees grow in their careers, because its that shared drive to aim high that drives our business and our culture forward. Dont meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At Luna Wireless we are dedicated to building a diverse, inclusive, and authentic workplace, so if youre excited about this role but your past experience doesnt align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. At Luna Wireless, A T-Mobile Premium Retailer, we strongly encourage everyone, including people of color, veterans, military spouses, individuals with disabilities, lesbian, gay, bisexual, transgender, queer and non-binary people, and parents to apply. We are an equal opportunity employer and welcome everyone to our team.

Job Description Job Description Date 04/2020 Location 1300 Airport Road, North Brunswick NJ Title Specialist, Quality Assurance Documentation Department Quality Assurance & Regulatory Reports to Manager , Quality Assurance/ Head of Quality Assurance FLSA (Exempt or Non-Exempt Exempt Role Overview A Specialist, QA Documentation will be responsible for the writing, distribution, collection, storage, and maintenance of our company’s documentation. This position will help ensure compliance to SOPs, GMP documentation and to 21 CFR Part 111 and 117. This position Reports to the Quality Assurance Manager and dotted line to Head of Quality Assurance. Areas of Responsibility • Creates documentation that meets the regulatory requirements before distributing through the company to implement., • Acting as a point of contact for retrieval of specific documentation as required., • Write, review, and update the SOPs relating to documentation collection and storage., • Keeps up to date with the regulatory requirements around documentation and implements changes if necessary., • Work with internal teams to obtain an in-depth understanding of the processes and documentation requirements., • Organize, write, and maintain operational procedures and/or manuals for a variety of topics., • Perform quality assurance on existing documentation., • Revise outdated documents and ensuring that all staff are using the correct version. Education & Qualification: • Bachelor’s Degree preferred, • Demonstrated above average written communication skills in the English language, • Must be advanced with all MS Office software, must have excellent typing skills, • The ability to interact with department heads regarding corporate compliance, • Ability to maintain professional and positive attitude, • Ability to manage multiple tasks effectively & efficiently, • Possess high-level of ethics and integrity USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Job Description Date 05/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, QC Analytical Department Quality Control Reports to Manager, Chemistry Laboratory FLSA (Exempt or Non-Exempt Non-Exempt Role Overview We are seeking a detail-oriented and skilled Laboratory Technician to join our Chemistry Lab division. The successful candidate will support physical and chemical testing of raw materials, R&D, Method development / Stability and finished products using various analytical instruments / Equipment’s and techniques to ensure compliance with internal specifications. Areas of Responsibility • Prepare samples, Mobile Phase, Buffer solution, Dissolution Media, Sample digestion etc. for analysis according to standard operating procedures (SOPs) or as per suitable method provided by senior management., • Perform chemical analyses using techniques such as UV-Vis, Dissolution, FTIR, titration, Microwave Digestion system, TOC water sample and physical testing using apparatus and equipment’s’ such as Disintegration, Bulk Density, Tap Density, Loss on Drying, Karl Fisher, etc., • Accurately record, and report test results in compliance with GLP/GMP standards., • Calibrate, maintain, and troubleshoot laboratory instruments and equipment. Example-pH meter, Weighing Balance, etc., • Maintain a clean, organized, and safe work environment., • Assist in the development and validation of analytical methods under supervision., • Document laboratory activities and results in lab notebooks, Raw Datasheets, and on computer system with validated excel., • Dispose of chemical waste properly and follow all environmental, health, and safety (EHS) protocols., • Participate in quality audits and continuous improvement initiatives., • Must be able to work extended hours as needed and occasional weekends., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • Associate's or Bachelor's degree in Chemistry, Biochemistry, or related scientific field., • 0–3 years of hands-on experience in an analytical chemistry lab (academic or industrial)., • Strong understanding of laboratory safety and quality standards (e.g., GMP, GLP, ISO)., • Good problem-solving and organizational skills with attention to detail., • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11, • Strong working knowledge of Microsoft Word, Excel., • Good documentation practices and able to write simple, clear reports, • Meets commitments on time and practices time-management skills, • Seeks to identify continuous improvement needs, • May execute 90%-100% of their work at the bench level either standing or sitting on a stool., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • On occasion may need to lift up to 35 lbs., • Approximately 80% of work performed in a laboratory environment which may have unpleasant odors or hazardous conditions., • Temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Office Hours: 8:30 AM - 5:00 PM 9:00 AM - 5:30PM

Job DescriptionOur Winning Team Starts With You! As a Banquet Supervisor at our premium banquet, youll be an integral part of a small, committed team that prides itself on delivering standout experiences to customers. You must have full knowledge of menu design and budget management with at least 3 years of Managerial experience in similar role. Benefits: • Competitive hourly wage plus tips., • Flexible scheduling., • Opportunities for advancement within the company., • Training and development opportunities. We are looking for a Banquet Supervisor to lead a team of kitchen and wait staff and make sure they deliver excellent customer service. Banquet Supervisor responsibilities include planning food and beverage menus, assisting Operation manager for room set up as per plan and coordinating food preparation and serving during events. To be successful in this role, you should have work experience in catering or hospitality and solid organizational abilities. Ultimately, you will ensure that we run efficient catering facilities and help increase our clientele. Responsibilities: • Oversee all banquet operations during weddings and events, • Coordinate with catering and service staff to ensure seamless execution, • Ensure all setup and breakdown processes are efficient and organized, • Address any guest concerns or issues promptly, • Maintain high standards of service and cleanliness, • Ensure compliance with health and safety regulations, • Train and manage wait staff, • Schedule staff shifts, • Arrange food tastings with potential customersQualifications:, • Previous experience in banquet supervision or a similar role, • Strong leadership and communication skills, • Ability to work flexible hours, including weekends and holidays, • Attention to detail and excellent organizational skillsBenefits:, • Competitive Wages, • Opportunities for advancement, • Flexible Schedule

Job Description Digital Marketing Manager About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: The Digital Marketing Manager will be a strategic leader in defining and driving our global digital presence, shaping how our brand is experienced across key online touchpoints. Reporting directly to the Global Head of Marketing, this individual will serve as the powerhouse of our digital platforms: composecure.com and getarculus.com; and play a pivotal role in transforming them into high-performing, conversion-focused growth engines. As a key member of the Marketing team, this role will collaborate across business functions and with our external agency, ensuring that our websites are optimized to meet evolving customer expectations and deliver measurable business results. The Digital Marketing Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Own and manage all aspects of two websites (company site: composecure.com; technology brand site: getarculus.com), • Develop overall website strategy and KPIs, • Create and manage user experience across the sites to drive customer engagement with product and brand, • Create and manage content (copy, photography, product updates, videos, blogs), • Oversee and manage SEO/SEM, • Manage relationship with external agency that maintains websites - working across product, IT, cybersecurity, legal/compliance, • Help manage website unit sales from an e-commerce functionality to optimize unit sales, • Add additional product pages for customized products, co-marketing deals, and new products, • Expecting to double unit sales in 2026, • Manage external agency to ensure browser and mobile responsiveness, accessibility, and performance are continuously optimized; troubleshoot technical issues, working with developers or external vendors as needed, • Monitor and report on website KPIs (traffic, bounce rate, conversion rate, page load time, etc.) and pivot as needed to ensure meeting goals/objectives, • Working with agency to manage and monitor cookies and additional compliance/regulations on ongoing basis, • Lead website redesigns as needed, • Stay up-to-date with latest trends and emerging tools, • Additionally, will own content creation to support growth for campaigns, events, sales team., • Collaborate with internal teams: Product, IT, Legal/Compliance, Sales, Customer Support Qualifications: • A minimum of 5 years (or more) of proven and demonstrated experience managing websites ideally in a B2B environment or with eCommerce platforms, • Proven track record of growing and managing digital presence for technology or financial brand, • Proficiency in digital marketing tools (Google Analytics, CRM systems/marketing automation, SEO/SEM, OneTrust), • Experience with eCommerce platforms (BigCommerce), • Creative thinker with attention to detail and analytical skills, • Understand the importance of measurement and ROI, excels at providing insights from digital reporting and other analytics, • Strong copywriting, editing, and communication skills, • Ability to multitask, meet deadlines, and work independently., • Passion / interest /experience in fintech, digital security, and crypto space preferred, • Proactive team-player with the ability to multi-task, think creatively, and learn quickly, • Experience working in a start-up atmosphere and/or a fast-changing, hands-on work environment is ideal, • Bachelor's degree in Marketing, Communications, or similar field required At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Job Description Date 2025 Location 1300 Airport Road, New Brunswick New Jersey Title Associate, Purchasing Department Operation (Purchasing) Reports to Senior Manager, Purchasing & Sourcing FLSA (Exempt or Non-Exempt Exempt Role Overview The Purchasing Associate ensures the timely procurement of materials and components, manufacturing equipment, lab supplies, warehouse, and office supplies across all facilities. Areas of Responsibility • Issue Purchase orders in the ERP system for Raw Materials and/or packaging materials and sending them out to respective vendors., • Issue Purchase orders in the ERP system for consumable goods to support manufacturing, engineering, Lab, and Warehouse across all facilities and sending them out to respective vendors., • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Work closely with the planning team and Purchasing manager to ensure the accuracy of Purchase orders issued in the ERP system., • Work in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Comply with all job-related safety and other training requirements., • Keep management informed of area activities and of any significant problems. Education & Qualification: • Able to read, write and speak English sufficiently., • Strong project management and leadership skills., • Comfortable with figures and in collecting, analyzing, and interpreting data., • Solid judgment with ability to make good decisions., • Ability to interact effectively with different departments and with all levels of management., • Must know MS Office, particularly Excel., • Knowledge of ERP systems (Syspro, SAP) preferred., • Ability to navigate office, lab, and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions. Physical demands involved in office work such as the ability to talk, hear, use hands to hold and feel; work on a computer up to 7-8 hours a day; close vision required for computer usage. • Exposed to lab and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions., • Temperature controlled for heat and air conditioning. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including medical, dental, vision, short- and long-term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation in the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. This Job Description has been reviewed with my supervisor.

Job Description Accounting Manager About CompoSecure Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: The Accounting Manager is responsible for overseeing the daily operations of the accounting department, ensuring accurate financial reporting, maintaining compliance with regulatory requirements, and supporting strategic financial planning. This role plays a key part in managing the general ledger, preparing financial statements, and leading the monthly close process. The Accounting Manager will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: Management • Oversee and maintain the general ledger and sub-ledger reconciliations., • Manage the monthly, quarterly, and annual close processes., • Prepare and analyze financial statements and reports., • Ensure that the monthly close is completed in the first five days of each month, • Prepare the monthly report file, • Prepare variance analysis of major accounts, • Prepare job costing reports periodically, • Prepare the weekly accounting dashboard, • Ensure that periodic bank reconciliations are completed, • Maintain the chart of accounts Compliance • Coordinate the provision of information to external and external auditors, • Comply with local, state, and federal government reporting requirements and tax filings, • Ensure compliance with GAAP and applicable regulations., • Maintain internal controls and accounting policies., • Prepare and file tax documents and regulatory reports. Team Leadership • Supervise and mentor accounting staff., • Coordinate cross-functional collaboration with other departments., • Provide training and development opportunities. Qualifications: • A minimum 5 years of experience and a progressive responsibility experience for a major company or division of a large corporation., • Bachelor's degree in accounting or business administration., • Ability to relate to employees and understand their needs;, • Excellent communication skills, both oral and written;, • Strong attention to detail and ability to self-check own work;, • Excellent time management skills;, • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative;, • Excellent problem solving skills; and, • High level of computer literacy including working knowledge of Microsoft Office applications and Outlook. Physical requirements and work environment: • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Office environment is of moderate noise level. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Please Note: U.S. Citizenship is required for this position due to the confidential nature of the work. • RELOCATION SUPPORT AVAILABLE. Position Overview: We're looking for a Manager, Cybersecurity who can run our SOC operations, vulnerability management, DFIR, and security tool health - while also managing our MSSP/MDR partners, running red team engagements, and integrating cyber threat intelligence into daily operations. This is not a checkbox role. You'll be the frontline leader making sure our defenses are sharp, our partners deliver value, and our playbooks are battle-tested. • Compensation Range: 160-180k USD + 20% bonus (performance based) * This is an on-site position in Somerset, NJ (no remote). * About the employer: Founded in 2000, our employer is a leading provider of premium metal payment cards and secure authentication solutions. Headquartered in Somerset, New Jersey, the company serves major financial institutions, producing over 30 million metal cards annually and holding a dominant share in the premium metal card segment. It also offers advanced digital security through a proprietary platform that includes three-factor authentication and cold storage for digital assets, generating over $420 million in annual sales. Key Responsibilities: SOC & Security Operations • Run day-to-day SOC ops (monitoring, alert triage, escalation), • Manage MSSP/MDR relationships - hold vendors accountable, ensure quality, and drive outcomes, • Ensure 24/7 coverage through smart playbook design and partner integration Vulnerability Management • Own the vuln management lifecycle: scanning, prioritization, patching, reporting, • Work with IT/DevOps to ensure remediation sticks, not just tickets get closed, • Report enterprise risk posture and trendlines directly to leadership Threat Intel & Red Teaming • Lead coordination of red team and purple team exercises to test resilience and validate controls, • Integrate Cyber Threat Intelligence (CTI) into SOC processes - from IOCs to TTPs, • Run threat hunting campaigns based on MITRE ATT&CK and emerging intel Security Tooling & AI/ML • Deploy and maintain enterprise tools (SIEM, EDR, WAF, scanners, SOAR, etc.), • Ensure tools are tuned, integrated, and delivering value - not shelfware, • Explore AI/ML anomaly detection and automation opportunities to stay ahead of threats Digital Forensics & Incident Response (DFIR) • Lead investigations end-to-end - endpoints, servers, cloud, and OT/ICS when needed, • Run tabletops, refine playbooks, and ensure incident readiness, • Mentor analysts in forensics, hunting, and response Team Development & Coaching • Lead the professional growth of SOC analysts and cybersecurity team members through regular coaching, feedback, and development plans. Foster a culture of continuous learning and skill advancement., • Empower team members to take ownership of key initiatives, encouraging autonomy and accountability in daily operations and incident response. Qualifications: Required • 7+ years in cybersecurity ops, with 3+ in a lead or senior role, • SOC management and vendor/MSSP oversight experience, • Proven vulnerability management success across hybrid environments, • Hands-on with SIEM, EDR, • Solid DFIR skillset: log/memory/packet forensics, endpoint investigations, hunt operations, • Experience coordinating red team engagements and actioning results, • Strong communicator: can brief execs and mentor juniors Preferred • Threat intel analysis and integration experience, • Cloud security ops in AWS/Azure, • Certifications: GCIA, GCFA, GCIH, CISSP, CISM, • Financial services or manufacturing sector experience Why Join: • MSSP + In-house hybrid: You'll manage our MDR/MSSP partners and ensure elite outcomes, • Red & purple team action: Run live-fire tests and harden defenses against real-world adversary tradecraft, • AI/ML innovation: Help shape how anomaly detection and automation enhance our defenses, • Elite culture: We work hard and aim for the top 5% of secure manufacturers globally Our employer believes in supporting their employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process.

Software Support Technician Software Support Technician WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in California, Georgia and Texas. Our future headquarters are located in Iselin, New Jersey. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Job DescriptionDescription: Ecommerce Implementations Project Manager Celerant Technology – The Project Manager manages key client projects. Project management responsibilities include the coordination and completion of projects on time within budget and within scope. Oversee all aspects of ecommerce projects. Set deadlines, assign responsibilities, monitor, and summarize progress of project. Prepare reports for upper management regarding status of project. The successful candidate will work directly with clients and web developers to ensure deliverables fall within the applicable scope and budget. Perform a variety of tasks. Lead and direct the work of others. A wide degree of creativity and latitude is expected. Reports to Department manager. Enhance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. This Position is for the Roswell, Georgia Office. No telecommuting. PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: -Ensure that all projects are delivered on-time -Maintain project plans to monitor and track progress -Manage the relationship with the client -Meet with clients to take detailed ordering briefs and clarify specific requirements of each project -Track project performance -Perform other related duties as assigned -Client training Requirements: -Proven working experience in project management -Excellent client-facing and internal communication skills -Excellent written and verbal communication skills -Solid organizational skills including attention to detail and multitasking skills QUALIFICATIONS & EXPERIENCE: -Project Management Experience -Creative, Innovative Individual -Ambitious, Ability to multi-task -Team Player, but also able to work on own and manage time effectively -Experience with Ecommerce -Experience with Social Media -A functional understanding of HTML and CSS -A functional understanding of Shopify and/or Woo Commerce Work Environment and Physical Requirements Work is performed primarily in an office setting. Work pressures, disturbances of work flow, and/or irregularities are expected and occur on a regular basis. Incumbent is continuously faced with a number of projects considered to be high priority. Project work must continue while assuring that day-to-day operations continue and technical problems are resolved. Exposure to video display terminals occurs on a regular basis, minimal physical exertion is required; however, prolonged periods of sitting or standing may occur. Learned physical skill required for keyboarding and use of computer tools. WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in California, Georgia, and Texas. Celerant’s staff consists of several departments including Web Services, Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . Requirements: PRIMARY RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: -Ensure that all projects are delivered on-time -Maintain project plans to monitor and track progress -Manage the relationship with the client -Meet with clients to take detailed ordering briefs and clarify specific requirements of each project -Track project performance -Perform other related duties as assigned -Client training Requirements: -Proven working experience in project management -Excellent client-facing and internal communication skills -Excellent written and verbal communication skills -Solid organizational skills including attention to detail and multitasking skills QUALIFICATIONS & EXPERIENCE: -Project Management Experience -Creative, Innovative Individual -Ambitious, Ability to multi-task -Team Player, but also able to work on own and manage time effectively -Experience with Ecommerce -Experience with Social Media -A functional understanding of HTML and CSS -A functional understanding of Shopify and/or Woo Commerce

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Location: North Plainfield, New Jersey Company: Avantier Premium Custom Optics Manufacturer Base Salary: $65,000 $80,000 Job Description: AVANTIER Premium Custom Optics Manufacturer is looking for a dynamic and results-driven Project Manage to join our growing team. We serve high-tech industries such as Aerospace, Biomedical, Life Sciences, and Research, providing precision optical solutions tailored to our clients needs. In this high-impact role, youll be at the forefront of our growth effortsleading strategic outreach, managing targeted campaigns, and qualifying high-value leads. You'll work closely with Sales, Marketing, and Product teams, with strong visibility and opportunity for advancement. What Were Looking For: • A self-motivated sales professional with a proven track record in B2B project management, • Strong relationship-building skills and a strategic mindset, • Experience working with technical or manufacturing industries is a plusJoin us and be part of a team that's advancing innovation through optics. Responsibilities Managing the sales cycle from qualified inbound leads to close, with a focus on generating incremental revenue. Proactively identifying and pursuing new business opportunities, nurturing relationships, and building a strategic sales pipeline for sustained long-term growth. Collaborating with prospects to understand their needs, challenges, and objectives, and delivering customized optical solutions that align with their goals. Consistently meeting or exceeding weekly activity targets, including outreach, follow-ups, and sales engagement metrics. Skills/ Key Qualifications: • 3+ years of successful B2B project management experience, ideally with technical products, • Proven track record in managing warm leads and assist closing long sales cycles, • Skilled in delivering effective presentations and demos, • Comfortable attending industry events (conferences, trade shows) to generate leads, • Excellent communication skills, both written and verbal, • Team-oriented with a positive, proactive attitude, • Background or interest in science/optics is a plus, • Ability to build relationships with C-level decision makers is a strong advantageEducation: Bachelor's degree required, additional certificates are a bonus Why Join Avantier? • Industry training provided, • Work with a dynamic, collaborative team, • High-impact role with growth opportunities

Job Description Join the Team Powering the Global Semiconductor Revolution. The semiconductor industry is experiencing unprecedented growth, projected to reach $701 billion in 2025 (an 11% increase) and $800 billion by 2026, driven by an AI revolution that shows no signs of slowing. While other sectors face headwinds, semiconductor assembly and advanced packaging is positioned for explosive 26% annual growth through 2033, making this the perfect moment to build your career in an industry that's only accelerating. From NVIDIA's AI processors to autonomous vehicles, every breakthrough depends on the microscopic connections and packaging innovations happening right now. Connections made possible by advanced materials science. The Opportunity Pave Talent is partnering with a $750M+ NYSE-backed specialty chemicals manufacturer in Central New Jersey, a global leader with 2,000+ employees across 6 continents who's the hidden champion behind critical semiconductor packaging and assembly materials. As R&D Project Manager, you'll be the catalyst transforming breakthrough chemistry into production-ready solutions that enable the next generation of computing power, AI acceleration, and advanced chip architectures. Your mission: drive 35+ new product development initiatives through Stage-Gate processes, reducing time-to-market by 70% while maintaining technical excellence in an innovation-driven culture that combines Fortune 500 resources with startup agility. What You'll Own • Lead cross-functional NPD projects from concept through launch, managing $1M+ budgets across 10+ active initiatives in die attach, wire bonding, encapsulation, and advanced packaging materials, • Orchestrate global teams across US, UK, Europe, and Asia to deliver cutting-edge semiconductor assembly solutions on aggressive timelines, • Partner daily with R&D Directors to prioritize portfolio of materials enabling heterogeneous integration, 3D packaging, and next-gen chip interconnects, • Drive Stage-Gate process implementation, transforming R&D productivity and establishing new PMO best practices, • Navigate technical complexity in materials science and semiconductor processing while keeping teams aligned on business outcomes, • Facilitate crucial conversations between R&D, Engineering, Manufacturing, and Quality teams, • Mentor technical teams in project management excellence while building scalable processes Required Qualifications • Master's degree (PhD preferred) in Chemistry, Materials Science, or Chemical Engineering, • 3+ years of industrial R&D experience in structured new product development environments, • Proven ability to manage complex technical projects in chemical/materials manufacturing, • Experience with Stage-Gate or similar NPD methodologies, • Strong technical acumen to engage meaningfully with PhD scientists and engineers, • Availability for on-site presence 3+ days/week in Piscataway, NJ Preferred Qualifications • Background in semiconductor materials, microelectronics packaging, or specialty polymers, • PMP or similar project management certification, • Experience with global team coordination across time zones, • Microsoft Project proficiency Why This Opportunity Stands Out Competitive Compensation Package: • Base salary: $92K-$130K, • Annual performance bonus: 10% target (potential 0-200% based on performance), • Employee Stock Purchase Plan with discounted company stock Comprehensive Benefits from Day 1: • Premium Health Coverage - Choice of 3 medical plans (Bronze/Silver/Gold tier) plus dental and vision insurance starting the first of the month after hire, • Generous Time Off - Discretionary PTO plus company holidays, increasing with tenure the longer you're with the company, • Automatic Financial Protection - Company-paid life insurance (2x salary, up to $500K maximum) and robust disability coverage:, • Short-term disability: 75-100% pay for up to 180 days, • Long-term disability: 60% pay until retirement age, • Retirement Planning - 401(k) plan with automatic 4% enrollment (eligible first of month after hire), • Family Support - 6 weeks paid parental leave at 100% pay (birth or adoption) after 1 year of service, • Wellness Incentives - Earn up to $600 annually through wellness program activities (deposited to HSA/FSA), • Employee Assistance Program - Free confidential counseling (1-3 sessions), 24/7 support, financial consultation, legal advice, and childcare/eldercare resources, • Work-Life Flexibility - Bereavement leave (3 days paid), jury duty pay, military leave, telehealth services, and various discount programs (retail, insurance, pet insurance) This close-knit team values every member's innovative ideas and maintains strong work-life balance while tackling the technical challenges that make Moore's Law possible and power the AI revolution. Ready to drive materials innovation at the foundation of the semiconductor boom? Join an industry projected for sustained double-digit growth while others contract. Apply via LinkedIn and Pave Talent will contact qualified candidates within 48 hours. This is a confidential search. Your application remains completely private.

Job Description Job Description Date 06/2025 Location 1300 Airport Road – Van Dyke Title Operator, Forklift Department Operations Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Ensures safety and quality standards are consistently followed., • Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritional’s, supplements, food or pharmaceutical manufacturing industries, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior experience driving sit-down and stand-up PITs and ticketing experience helpful, • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00pm to 11:30pm

Job DescriptionDescription: Technical Support Call Center Manager Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is continually expanding. Our future headquarters are located in Iselin, New Jersey (current headquarters just over the Outerbridge Crossing in Staten Island). We also have satellite offices in California, Georgia and Texas. For more information, visit us at . The Technical Support Call Center Manager oversees a department of 30+ analysts and agents across several locations. Our call center provides well-staffed and quality technical support 6 days a week during standard hours. We also provide on-call support after hours and on Sundays. We are looking for someone who can fill this role and take our call center to the next level. Responsibilities: • Oversee all call center operations and staff, • Prepare work schedules and adjust staffing based upon volume forecasts, • Hire and onboard new team members, • Enable and motivate staff to provide a high level of customer satisfaction, • Ensure that team members meet company standards for professionalism, • Monitor and address responsiveness for tasks, • Prioritize and escalate tasks based upon multiple factors, • Evaluate performance through reporting and analysis, • Proactively effect change by improving management and processes, • Develop agents and supervisors through training and mentoring, • Collaborate with other managers to satisfy customers and achieve company goals Requirements: • Management or supervisory experience in a call center, • College degree or course credits in management, administration or supervisory area, • Effective use of Microsoft Office and business applications, • Experience with analyzing staff and business data and effecting changes based upon that data, • Handles change with a positive attitude Optional Skills: • Ability to remotely manage team members, • Experience as an agent in a call center for technical products or services, • Basic SQL knowledge Benefits include Medical, 401(K), Vacation and Sick leave, Life Insurance, Flexible Spending Account. Optional Dental and Eye Care Coverage Available. Requirements: Requirements: • Management or supervisory experience in a call center, • College degree or course credits in management, administration or supervisory area, • Effective use of Microsoft Office and business applications, • Experience with analyzing staff and business data and effecting changes based upon that data, • Handles change with a positive attitude