Trabajos r&d en Clifton, New JerseyCrear alertas

Job Description Role Overview: Pfister Energy is seeking a Solar Electrician to support operations and maintenance (O&M) of commercial and industrial solar PV systems, ensuring safe, reliable performance and maximum energy production across our Northeast and Mid-Atlantic portfolio. Core Responsibilities: • Perform preventive and corrective maintenance on solar PV systems (rooftop, carport, ground‐mount), including visual inspections, torque checks, cleaning, and thermal imaging where applicable., • Troubleshoot, test, and repair electrical components (combiners, inverters, switchgear, communications, monitoring systems) using appropriate diagnostic tools (multimeter, insulation tester, I/V curve tracer, etc.), • Respond to service tickets and alarms, diagnose faults, execute repairs, and document findings with clear notes and photos in O&M reporting systems., • Verify work against single‐line diagrams, wiring schematics, and manufacturer documentation, ensuring compliance with NEC and local electrical codes., • Perform lockout/tagout, ground verification, and other safety procedures during energized and de‐energized work., • Support commissioning, performance testing, and acceptance checks for new or upgraded PV systems as needed., • Interface professionally with site personnel, customers, and internal teams, clearly communicating findings and recommendations. Required Qualifications: • High school diploma or GED., • Licensed electrician (Journeyman or equivalent) in New Jersey, OR strong electrical background with documented experience in PV systems and willingness to meet licensing requirements within a defined timeline., • 3+ years experience in electrical work, with at least 2 years focused on solar PV installation, maintenance, or troubleshooting (commercial/industrial strongly preferred)., • Solid understanding of AC and DC electrical theory, PV system architecture, and grid‐tied systems (inverters, transformers, protection devices, monitoring)., • Proven ability to interpret electrical plans, single‐line diagrams, and manufacturer manuals., • Valid driver’s license and clean driving record for regular travel to regional sites., • Ability to work at heights, on rooftops, and in outdoor environments in varying weather conditions. Preferred Certifications and Training: • OSHA 30 and NFPA 70E (or equivalent electrical safety training)., • NABCEP PV Installation Professional, PV Technician, or other relevant NABCEP, • CPR/First Aid, • Familiarity with PV performance monitoring platforms, SCADA systems, and computerized maintenance management system. Skills and Attributes: • Strong troubleshooting skills with a methodical, data‐driven approach to fault finding and root‐cause analysis., • High attention to detail and commitment to safety, quality, and compliance., • Ability to work independently in the field while collaborating effectively with project managers, engineers, and fellow technicians., • Clear written and verbal communication for service reports, customer interactions, and internal coordination., • Comfortable with digital tools (tablet/phone apps, Excel, email, photo documentation) for work orders and reporting. Physical and Work Environment Requirements • Ability to lift 50 pounds, carry equipment, and use hand and power tools safely., • Comfortable climbing ladders, working at heights with fall protection, and accessing roofs or elevated structures., • Able to stand, walk, and work outdoors for extended periods in hot, cold, or inclement weather., • Willingness to travel to sites within New Jersey and neighboring regions as required by O&M schedules (day trips; occasional extended days possible). Compensation & Benefits: • Competitive hourly pay based on experience and role, • Prevailing wage opportunities on qualifying projects, • Overtime, travel pay, per diem, and lodging (when applicable), • Matching 401(k), • Medical, dental, and vision insurance, • Health Reimbursement Account, • Life, AD&D, Accident, Disability, and Critical Illness Insurance, • Paid Time Off and Paid Holidays, • Company-provided PPE, tools, and safety equipment, • Employee referral bonuses \nCompany Description Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law. Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Our client, a hugely successful, innovative, and well established bakery products company is experiencing enormous growth and now seeking a Director, Innovation & R&D as an addition to staff: Job Title: Director, Innovation & R&D Department: R&D/Innovation; ‘Bake Excellence’ Reports to: Ownership Collaborates with: Baking Direct Reports: Food Scientists/Technologists; Application Chefs/Bakers; Lab Techs. Overview: ‘Imagineer’ and oversee all aspects of Research and Development activities related to the creation and betterment of our company’s bread and baked goods products. Collaborate with Baking, Quality, Operations, Engineering and other Departments to qualify, optimize, and commercialize these new products and their processing, always with the goal to meet and exceed our customers' demands and expectations. This position requires a resourceful background in food science, baking technologies, and project management, along with exceptional leadership and collaboration skills. Presence Expectations: • Presence in the Facility, spanning five work days per week;, • ‘On the R&D/Production Floor’ Presence during trials, troubleshooting, initial commercializing;, • ‘In the Lab’ during Reviews and Meetings;, • ‘On the Road’ for Food and/or Ingredient Shows and Conferences; occasional Presentational or Technical visits to Customers; at will to seek new ideas. _ Essential Company-Wide Duties: • Be a ‘Bake Excellence’ Steward who supports and protects the Mission and Culture of our Company., • Exemplify Transformative Leadership., • Maintain a Safe and Sanitary Working Environment for all employees., • Support highest level Food Safety Program and Culture. Infuse Purpose, Clarity, Energy, and Opportunity to your Department and Workforce. • Promote and Support Training and Growth of Personnel, inclusive direct training by you to those who directly report to you; while, equally, showing those directly under you the foundations to train those directly under them; etc., • Create a Platform of Walk-Throughs, Meetings, Huddles and Reviews that are efficient, informative, and preliminary for ensuing follow up actions; you shall moderate those meetings that need your direct involvement., • Support your departments with measured and sensible Metrics, which will become consolidated into accurate and detailed Reporting, presented daily, weekly, monthly, quarterly, etc. Departmental and Positional Responsibilities: Intimately Know Our Products, Our Equipment’s Capabilities, Our Markets, Our Customers- and their needs; • Structure a 3 Year Plan for New Products, engaging Marketing and Consumer Trends;, • Create and exercise a Stage-Gate Process that will collaborate with supporting personnel and departments to ideate and imagineer the development and subsequent commercialization of new bakery products, including, but not limited to, new breads, bread-based snacks, filled / folded handheld breads, par baked breads, frozen dough, non-flour based baked goods and sweet goods;, • Develop and maintain quality control procedures for test raw materials, ingredients, and finished products to ensure consistent product quality and food safety during testing and development., • Establish proper laboratory and kitchen procedures to ensure the proper testing of products, use of equipment, delivery of samples to customers and preparation of presentations for visiting customers and clients., • Manage sensory evaluations and laboratory testing to monitor and improve product attributes and shelf life., • Stay updated with food safety regulations and industry standards to ensure products meet all necessary requirements., • Work with Baking, Processing and continuous Improvement to provide improvements and/or savings to products and production;, • Attend, present and represent the company at food shows, supplier/customer events, Customer presentation and/or ‘pilot’ runs;, • Travel to different markets, both domestic and global, to keep abreast with changing Consumer trends; QUALIFICATIONS • College educated, though no specification as to major;, • Baking or Culinary Scientist or Equivalence, • ‘Foodie’ Friendly, • Project-Management highly skilled, • Minimum 15 years of experience working within the Food Industry; minimum 10 years of those years involved in R&D/Innovation; vast experience working with ‘Bakery’ _ COMPENSATION • $165K to $200K Base Annual Salary, pending Qualifications, • Incentives based on Scorecard and/or mutually agreed Goals and Timelines, • Medical, 401K Programs, • 20 PTO Days annually, • Major Holidays This is a growth opportunity with an industry leader!

Summary: The Scientific Affairs Manager is responsible for translating scientific evidence into accurate, compelling, and commercially-relevant scientific communications in support of Everwell Health ingredients. Reporting to the Senior Scientific Affairs manager, this role supports day-to-day scientific affairs activities and serves a key scientific partner to Marketing and Sales, helping endure that ingredient claims, marketing materials, customer communications, presentations, and educational content are scientifically accurate, appropriately substantiated, and in line with market regulatory requirements. The Scientific Affairs manager will communicate ingredient science directly to internal stakeholders, as well as directly to customers and other external stakeholders through virtual and in-person meetings, presentations, webinars, conferences, and industry events. The role will also support the Senior Manager, Scientific Affairs and Chief Science Officer in the planning and execution of preclinical and clinical research programs, including literature assessment, protocol development, study monitoring, data interpretation, and translation of study findings into claims and scientific communications. The successful candidate will combine strong scientific judgment with the ability to communicate complex science clearly and effectively to technical and non-technical audiences. Key Duties and Responsibilities Scientific Support – Execution, Translation, and Claims · Develop and maintain a thorough understanding of the scientific evidence supporting Everwell Health Ingredients' portfolio. · Support the development, substantiation, and maintenance of ingredient claims based on the totality of available scientific evidence. · Support maintenance of internal claims substantiation and scientific evidence documentation, including substantiation dossiers and data/information needed to support regulatory filings · Critically evaluate scientific publications, study results, and external scientific information for quality, relevance, and applicability to the company's ingredients. · Support Senior Manager, Scientific Affairs and Chief Science Officer in the planning and execution of preclinical and clinical research programs. · Review and interpret study data and contribute to identification of scientifically defensible conclusions, claims opportunities, and follow-up research needs. · Support translation of preclinical, clinical, mechanistic, and other scientific evidence into clear, accurate, and commercially relevant product positioning, claims, scientific narratives, and communications. · Support the Senior Scientific Affairs Manager and Chief Science Officer in the planning and execution of preclinical and clinical research programs. · Participate in study monitoring and review study progress, data, and deliverables for scientific quality and completeness. · Support translation of study results into claims, presentations, abstracts, posters, manuscripts, scientific materials, and commercial communications · Conduct literature assessments and scientific background reviews to inform study concepts, protocols, endpoints, and research questions. · Update and maintain internal literature libraries and manage documentation that tracks upcoming, ongoing, and past pre-clinical and clinical research projects. · Tracking and maintaining ongoing review of changes in the external regulatory and competitive environment Marketing and Commercial Support · Support Marketing in the development and scientific review of marketing collateral, websites, presentations, white papers, educational materials, webinars, social and digital content, and other communications. · Review marketing and commercial materials for scientific accuracy, appropriate interpretation of evidence, and consistency with substantiated ingredient benefits. · Help convert technical scientific findings into differentiated, understandable, and credible messaging appropriate for customers, practitioners, consumers, and other audiences. · Collaborate with Marketing, Sales, Regulatory Affairs, and other functions to ensure scientific messaging is consistent across channels and aligned with company strategy. · Provide scientific input into new product positioning, ingredient differentiation, and commercial opportunities. Customer and External Scientific Engagement · Serve as a scientific representative of Everwell Health Ingredients in customer meetings, both remotely and in person. · Present the scientific rationale, mechanisms, clinical evidence, and substantiated benefits supporting the company's ingredients. · Respond to customer scientific and technical questions and provide appropriate scientific materials and supporting literature. · Deliver scientific presentations at customer meetings, webinars, conferences, trade shows, industry events, and other external forums. · Build credibility and effective working relationships with customer technical, R&D, medical, scientific, and commercial teams. · Support customer-specific scientific education and ingredient training as appropriate. Internal Scientific Collaboration and Education · Provide scientific training and education to Sales, Marketing, Customer Service, and other Everwell Health employees regarding ingredient science and clinically substantiated benefits. · Work cross-functionally to support business priorities. · Maintain awareness of relevant scientific, regulatory, and industry developments affecting dietary supplements, functional foods, and nutritional ingredients. Education and Experience Requirements · Master's degree in Nutrition, Food Science, Biological Sciences, Biochemistry, Physiology, Pharmacology, Chemistry, or a related scientific discipline required; PhD or other advanced scientific degree is a plus. · Approximately 3–5+ years of relevant industry experience in scientific affairs, medical/scientific communications, nutritional science, clinical research, dietary supplements, functional foods, food ingredients, consumer health, or a related field. · Experience translating scientific evidence into claims, presentations, marketing materials, educational content, or customer-facing communications strongly preferred. · Experience supporting clinical or preclinical research programs preferred. · Experience within the dietary supplement, functional food, nutrition, or branded ingredient industry is strongly preferred. · Familiarity with the regulatory framework governing dietary supplement and food claims is desirable. Knowledge, Skills and Abilities · Strong scientific writing, interpretation, and critical-thinking skills. · Excellent verbal communication and presentation skills, with the ability to explain complex scientific concepts clearly to both scientific and non-scientific audiences. · Demonstrated ability to distinguish between what scientific evidence demonstrates, supports, suggests, and does not support. · Ability to develop scientifically rigorous communications while understanding commercial objectives and audience needs. · Strong interpersonal skills and comfort interacting directly with customers and external scientific stakeholders. · Ability to work effectively across cross-functional teams. · Strong organizational and project-management skills with the ability to manage multiple priorities and deadlines. · High attention to detail and commitment to scientific accuracy and quality. · Ability to work independently while appropriately seeking input and alignment from senior scientific leadership. · Proficiency with scientific literature databases and standard business and presentation software. Competencies · Commitment to scientific excellence and integrity. · Analytical and evidence-based decision making. · Strong communication and scientific storytelling. · Customer orientation and commercial awareness. · Collaboration and cross-functional partnership. · Initiative, accountability, and ownership. · Intellectual curiosity and willingness to challenge assumptions. · Ability to translate science into practical business value. Travel Requirements Ability to travel approximately up to 30%, including customer meetings, conferences, trade shows, investigator/CRO meetings, and company meetings. Supervisory Capacity: No direct reports Special Requirements: Exemplify all Everwell Health values, namely Do the Right Thing, Be Proactive, Aim Higher, Uncommon Thinking and Win Together Physical Demands: N/A Comprehensive insurance and benefits package, including health, vision, and dental, 401K plan participation + yearly company match Paid vacation and sick-leave. Invaluable learning experience at a high growth, science-first environment with strong fundamentals, a deep and innovative product pipeline, and a loyal customer base. Equal Employment Opportunity Everwell Health is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability, or veteran status.

We Provide Solutions. Patients and Physicians rely on our diagnostic testing, information, and services to help them make better healthcare decisions. These are often serious decisions with far reaching consequences, and require sensitivity, tact, and a clear dedication to service. It’s about providing clarity and hope. As a Senior Product Manager - HIV, you will work for the world leader in the industry, with a career where you can expand your skills and knowledge. You’ll have a role where you can act with professionalism, you can inspire colleagues, and you can care about the work we do and the people we serve. The Senior Product Manager will lead new solution/testing development and life cycle management for the specified segment (HIV) through cross-functional teams. You will advocate and prioritize business cases to the segment Senior Product Director and win support to execute strategies through commercial, marketing and the value-delivery organization. This is a hybrid position based in Secaucus, NJ (3 days per week in-office). • Execute various stages of product management and contribute to strategic planning for clinical focus areas (HIV testing), • Lead cross functional teams to identify, develop and implement product/solutions addressing unmet customer needs that will drive profitable growth, • Develop segment annual Operating Plan (AOP) in concert with Value Delivery partners, • Execute effective life-cycle management through robust cross-functional team management, • Work with Value Delivery partners to achieve HIV testing revenue targets, • Partner with Marketing on product/solution marketing strategy and mix, • Rigorously assess new products/solutions to enable prioritization within R&D, IT and Operations, • Generate customer insights to define customer/market sub-segment requirements to set product/portfolio solution, priority setting, risk management, • Define and monitor product/service sub-segment metrics (including TAT and other potential requirements such as billing programs, prior authorization etc.), • Understand and monitor the competitive landscape and identify any gaps/opportunities, • Understand continuum of care requirements and identify any gaps/opportunities Requirements: • 5 -7 years relevant experience in healthcare, preferably with at least 3 years in marketing & product management, • HIV Commercial/Clinical/Pharma Experience, • Strong self-starter Preferred Work Experience: • Knowledge of HIV segment strongly preferred Knowledge: • Understanding of the lab industry and Healthcare landscape Skills: • Influencing without authority, • Cross-functional collaboration, • Strong follow-up skills, • Clear, concise communicator who can adjust to different audiences Education • Bachelor’s Degree Bachelor’s degree in life sciences, business, marketing and/or product management. (Required), • Master’s Degree Advanced degree/ MBA preferred (Preferred) Skills: • Influencing without authority, • Cross-functional collaboration, • Action Oriented, • Analytical Skills, • Critical Thinking, • Learning Agility, • Perseverance, • Plans & Aligns, • Communicate effectively, • Drives Results

We Provide Solutions. Patients and Physicians rely on our diagnostic testing, information, and services to help them make better healthcare decisions. These are often serious decisions with far reaching consequences, and require sensitivity, tact, and a clear dedication to service. It’s about providing clarity and hope. As a Senior Product Manager, you will work for the world leader in the industry, with a career where you can expand your skills and knowledge. You’ll have a role where you can act with professionalism, you can inspire colleagues, and you can care about the work we do and the people we serve. The Senior Product Manager will lead new solution development, life cycle management and test reimbursement strategies for the Genital Tract Infections (GTI) product segment by collaborating with cross-functional teams. You will advocate and prioritize business cases to the segment Senior Product Director and win support to execute strategies through commercial, marketing and the value-delivery organization. This is a hybrid position based in Secaucus, NJ, however, remote candidates may be considered. • Execute various stages of product management and contribute to strategic planning for clinical focus areas, • Lead cross functional teams to identify, develop and implement product/solutions addressing unmet customer needs that will drive profitable growth, • Develop segment annual Operating Plan (AOP) in concert with Value Delivery partners, • Execute effective life-cycle management through robust cross-functional team management, • Work with Value Delivery partners to achieve revenue targets, • Partner with Marketing on product/solution marketing strategy and mix, • Rigorously assess new products/solutions to enable prioritization within R&D, IT and Operations, • Generate customer insights to define customer/market sub-segment requirements to set product/portfolio solution, priority setting, risk management, • Define and monitor product/service sub-segment metrics (including TAT and other potential requirements such as billing programs, prior authorization etc.), • Understand and monitor the competitive landscape and identify any gaps/opportunities, • Understand continuum of care requirements and identify any gaps/opportunities Required Work Experience: • 5 -7 years relevant experience in healthcare, preferably with at least 3 years in commercial marketing or product management Preferred Work Experience: • Knowledge of and experience in specified product segment preferred Education: • Requires Bachelor’s degree in life sciences, business, marketing and/or product management., • Advanced degree (e.g. MBA) preferred Knowledge: • Understanding of the lab industry and Women’s Health testing landscape Travel • Up to 15% (Domestic) Skills: • Influencing without authority, • Cross-functional collaboration, • Action Oriented, • Analytical Skills, • Critical Thinking, • Learning Agility, • Perseverance, • Plans & Aligns, • Communicate effectively, • Drives Results

Supply Chain Innovation Director This organization is seeking a Director Supply Chain Innovation with a strong technical and engineering foundation, hands-on manufacturing experience, and the business acumen to drive transformational improvements across a complex supply chain network. This role operates at the intersection of engineering, operations, and business strategy, leading the end-to-end execution of innovation and product initiatives from concept through commercialization. The successful candidate will combine deep manufacturing expertise with strategic thinking to unlock growth opportunities, challenge existing processes, and deliver scalable, impactful change. Compensation & Benefits: $190,000 - $210,000 base salary + 25% bonus + LTIP (RSU plan, $30k annual value), 401k Match 9%, Medical, Dental, Vision, STD, LTD, Flexible PTO. Location/Schedule: East Hanover, New Jersey (Hybrid, 3 days on site 2 days remote). Relocation: Comprehensive relocation plan dependent on the individual situation. Job Description & Responsibilities: Strategic Planning and Network Optimization Partner with site leadership to develop and execute facility strategies and long-term roadmaps, integrating innovation and renovation initiatives into supply plans Lead network design and optimization efforts, including long-range capacity planning and scenario modeling to evaluate investments, consolidations, and expansion opportunities Provide strategic insight through scenario analysis, identification of interdependencies, and structured recommendations to senior stakeholders Collaborate cross-functionally with Commercial, Finance, R&D, Engineering, and Manufacturing teams to develop and implement growth and productivity strategies Serve as a central liaison across functions to align priorities and enable effective decision-making Conduct capacity and sourcing assessments to address current and future demand requirements Support capital planning and budgeting in partnership with Engineering, ensuring disciplined prioritization of investments Innovation and Commercialization Lead the end-to-end commercialization of new products and initiatives from concept through market launch Oversee structured innovation and project management processes at the site or regional level Lead design reviews and readiness assessments to ensure successful project execution Ensure effective change management for new and existing products, packaging, and processes Conduct post-implementation evaluations and communicate outcomes to key stakeholders Project Execution and Governance Drive consistent, high-quality project execution using established methodologies such as Lean, Six Sigma, Agile, or Stage-Gate Develop and manage project budgets, timelines, and resource plans Identify and mitigate risks, escalating issues when necessary Provide regular updates through dashboards, reports, and stakeholder reviews Ensure projects meet defined quality standards and are fully ready for launch Operational Efficiency and Productivity Partner across functions and sites to continuously improve processes and support product commercialization Lead simplification and de-complexity initiatives to enhance operational efficiency Align site-level change initiatives to maintain service levels while delivering transformation Ensure adherence to operational standards and performance targets Stakeholder Management Build and maintain strong relationships across cross-functional teams and manufacturing sites Influence stakeholders at all levels, from operational teams to executive leadership, to drive alignment and results Team Leadership and Capability Development Build and lead high-performing, cross-functional teams across internal and external partners Foster a culture of continuous improvement, accountability, and capability development Qualifications Seeking: Bachelor’s Degree in engineering, technical discipline, or equivalent practical experience Significant hands-on manufacturing experience, preferably within consumer goods or high-volume production environments Proven background in supply chain operations, program or project management, or strategy Experience in network design, capacity planning, and long-term scenario modeling, including investment and footprint optimization decisions Demonstrated success in commercializing new products or initiatives from development through launch Track record of driving large-scale transformation and cross-functional initiatives Strong understanding of end-to-end supply chain and manufacturing processes Experience with capital planning, financial analysis, and resource allocation Working knowledge of Total Productive Maintenance (TPM), Lean, Six Sigma, and related methodologies Proficiency in project management frameworks and tools (e.g., Agile, Stage-Gate, MS Project, or equivalent) Strong analytical capabilities, including data-driven decision-making and scenario modeling Familiarity with enterprise systems such as ERP and manufacturing execution systems (MES) Strategic and entrepreneurial mindset with a focus on driving transformational results Strong business acumen with the ability to connect operational decisions to commercial outcomes Excellent communication skills, with the ability to engage effectively at all organizational levels Proven ability to influence stakeholders and lead through complexity Capable of balancing strategic thinking with hands-on execution Demonstrated leadership, coaching, and team development capabilities

Job Title: Quality Assurance Specialist Position summary: Supports the QA Manager in implementing and monitoring quality and food safety management systems. Serves as the primary operational contact for product testing, vendor re-qualification, customer documentation, and QA system maintenance — ensuring compliance with internal standards and applicable regulations across the Everwell Health product portfolio. Key Responsibilities: Quality control & testing • Coordinate validation and verification testing; record and report results., • Manage product positive release (raw materials, intermediates, finished goods) with supply chain, vendors, and production sites; generate COAs., • Serve as primary liaison with third-party laboratories — obtain quotes, set up testing profiles, onboard new labs, and manage turnaround times., • Review and approve vendor COAs and specifications for raw material release., • Implement and maintain sample retention processes with suppliers, production sites, and third-party storage partners., • Maintain third party manufacturing documentation for all intermediate and finished products. Customer documentation • Write, control, and update QA documents and statements covering products and manufacturing sites., • Manage all customer documentation requests via TraceGains and other channels, ensuring timely and high-quality responses., • Onboard new customers on TraceGains; maintain accurate contact database., • Support export documentation creation and submission. Vendor & supplier management • Collect and track qualification documents from distributors, warehouses, and co-manufacturers via TraceGains., • Maintain TraceGains database — existing suppliers/materials/products, archive obsolete records, and flag non-compliant items to the QA team. QA systems & compliance • Support new and existing product implementation post-R&D, including internal and external documentation., • Participate in food safety plan implementation by maintaining records, supporting verifications activities and updating documentation., • Create and maintain SOPs and work instructions related to function, • Document and, where appropriate, investigate customer complaints, CAPAs, OOS events, deviations, and change controls., • As applicable record data for KPI reports., • Lead traceability exercises with contract manufacturers and suppliers, • Serve as system administrator and trainer for TraceGains, external laboratories, and related platforms. Education and experience requirements: • B.Sc. in Food Science, Food Quality, Chemistry, Biology, Pharmacology, or related field., • 3+ years of QA/QC experience in nutraceuticals, dietary supplements, functional foods, or a related industry., • Familiarity with regulatory compliance for food or dietary ingredients, contract manufacturing and analytical lab experience a plus., • Proficient in Microsoft 365 (Word, Excel, PowerPoint, Outlook) and Adobe., • Strong analytical, communication, and problem-solving skills. Location and Travel: This role is remote. Traveling up to 20%. Compensation and Benefits • Comprehensive insurance and benefits package, including health, vision, and dental, • 401K plan participation + yearly company match, • Paid vacation and sick-leave, • Invaluable learning experience at a high growth, science-first environment with strong fundamentals, a deep and innovative product pipeline, and a loyal customer base Equal Employment Opportunity Everwell Health is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability, or veteran status.

We are seeking a motivated and results-oriented Business Development Associate to support the growth of our US business across the pharmaceutical, biotechnology, medical device, and clinical research sectors. The role will combine outbound business development, lead generation, client relationship building, market research, and participation in industry conferences and networking events. The successful candidate will be expected to actively engage with prospective clients through phone, email, LinkedIn, and in-person industry events, representing the company professionally and helping generate qualified opportunities for CRO, FSP, and staffing services. Business Development & Lead Generation • Identify and research potential clients within pharmaceutical, biotechnology, medical device, and CRO organizations., • Develop and maintain a qualified pipeline of prospective clients., • Conduct outbound prospecting through: Email, LinkedIn, Phone calls, Industry databases, Networking and conferences, • Identify key decision-makers within target organizations, including: Clinical Operations, Procurement, R&D, Medical Affairs, Regulatory Affairs, HR/Talent Acquisition, Outsourcing/Vendor Management, • Qualify leads based on business needs, project requirements, timelines, and decision-making processes., • Schedule introductory meetings between prospects and senior Business Development/technical teams. Client Relationship Management • Build and maintain professional relationships with prospective and existing clients., • Respond promptly to client inquiries and coordinate internally to obtain required information., • Conduct regular follow-ups with prospects to move opportunities through the sales funnel., • Maintain accurate records of client interactions, opportunities, and next steps. Proposal & Sales Support • Assist Business Development Managers/Directors with: RFI/RFP responses, Proposals, Statements of Work, Capability presentations, Pricing requests, Client presentations, • Coordinate with internal teams including Clinical Operations, Medical Writing, Biostatistics, Data Management, Regulatory Affairs, Recruiting, and Project Management to obtain information for proposals., • Support preparation of client-facing presentations and capability decks., • Assist with handoff of awarded opportunities to delivery teams. Market Research • Research pharmaceutical and biotech companies, clinical development pipelines, outsourcing trends, and potential business opportunities., • Monitor competitor activities and market developments., • Identify conferences, industry events, and networking opportunities relevant to the company's services., • Maintain target-account lists and prospect databases. Required Qualifications • Bachelor's degree in Business, Marketing, Life Sciences, Biotechnology, Pharmacy, Healthcare, or related field., • 1–3 years of experience in Business Development, Sales, Inside Sales, Account Management, Marketing, Recruiting, or another client-facing role., • Excellent verbal and written communication skills., • Strong prospecting and follow-up skills., • Comfortable making outbound calls and conducting email/LinkedIn outreach., • Strong research and organizational skills., • Ability to communicate with professionals at different organizational levels., • Proficiency with Microsoft Office Suite, particularly PowerPoint, Excel, and Word., • Familiarity with CRM systems such as Salesforce or HubSpot is preferred., • Ability to work independently while collaborating effectively with cross-functional teams.

Title: Operations Manager Location: Newark, NJ Experience level: 7+ years in manufacturing or wholesale distribution Compensation: $90K-$110K Summary The Operations & Commercial General Manager serves as a strategic and hands-on executive leader driving operational excellence, commercial growth, and innovation across a dynamic enterprise comprising manufacturing (approximately 70%), wholesale distribution (approximately 30%), and product development. This executive oversees end-to-end plant operations, warehousing, supply chain logistics, vendor management, and enterprise technology implementations (ERP/WMS/CRM), while partnering closely with Product R&D and commercial teams to accelerate new product introductions (NPI), optimize brand P&L, expand market share, and lead high-performing teams. Key Responsibilities • Operational Leadership & Logistics: Direct all manufacturing facilities, warehouse operations, distribution centers, inventory management, shipping/receiving, logistics, and labor planning to achieve peak efficiency and customer fulfillment., • Product R&D & Commercialization: Partner closely with Product R&D, Engineering, and Quality on design-for-manufacturing (DFM), prototype transitions, BOM accuracy, commercialization timelines, and continuous product improvement., • Commercial Strategy & Market Expansion: Develop and execute growth strategies that align operational capability with customer demand, optimizing brand-level P&L, pricing strategies, and sales channels that yield maximum ROI., • Vendor & Contract Management: Oversee strategic procurement and vendor negotiations, establishing favorable contract terms, standard operating procedures (SOPs), and service-level agreements to optimize performance and reduce unit costs., • Marketing & Promotional Logistics: Lead promotional, advertising, and marketing operational logistics, including SOP development, scheduling, digital campaign coordination, and event execution to strengthen brand visibility., • Digital Transformation & Technology Integration: Champion organizational change management through technology, guiding ERP implementation, WMS integration, CRM adoption, and data readiness., • Continuous Improvement & Operational Excellence: Instill a culture of Lean, Six Sigma, 5S, and Kaizen methodologies to elevate safety standards, manufacturing yields, inventory accuracy, and overall throughput., • Customer Relationship Management: Cultivate deep customer and channel relationships, transforming data-driven market feedback into actionable operational and service enhancements., • Team Development & Mentorship: Lead, mentor, and build high-performing management, technical, sales, and frontline teams across both plant and corporate operations. Required Qualifications • 7+ years of progressive executive operations leadership encompassing manufacturing and wholesale distribution; experience in automotive aftermarket, tools, equipment, or related technical distribution environments is highly valued., • Demonstrated success leading cross-functional integration between Operations, Product R&D, Engineering, and Commercial/Sales teams during New Product Introduction (NPI) cycles., • Proven track record in vendor negotiation, contract development, margin optimization, and brand P&L management., • Direct hands-on experience supporting large-scale enterprise systems integration, including ERP, WMS, and CRM platforms., • Advanced expertise in Lean manufacturing, Six Sigma continuous improvement, quality systems, and supply chain analytics., • Exceptional executive decision-making, stakeholder communication, change leadership, and talent development capabilities. Preferred Qualifications • Bachelor’s or Master’s degree in Industrial Engineering, Operations Management, Supply Chain, Business., • Industry certifications such as Six Sigma Green/Black Belt, Lean Manufacturing, APICS (CPIM/CSCP), or OSHA safety credentials. Core Competencies Director Leadership & Strategic Decision-MakingEnd-to-End Supply Chain & Plant OperationsProduct Commercialization & DFM AlignmentVendor Negotiation & Contract StructuringP&L, Pricing & Margin OptimizationERP/WMS/CRM Transformation & Data AnalyticsLean/Kaizen & Continuous Process ImprovementCustomer Cultivation & Channel Growth Key Performance Indicators (KPIs) • Overall production throughput and manufacturing yield, • New product launch readiness, time-to-market, and DFM cost reduction, • On-time delivery (OTD) and fulfillment accuracy, • Inventory control accuracy and working capital optimization, • Channel profitability, brand P&L performance, and margin expansion, • Total labor productivity, operational efficiency, and ROI per sales channel, • Facility safety performance and regulatory compliance Reporting & Organizational Structure Direct Reports: Plant & Warehouse Supervisors, Inventory Control Manager, Shipping/Receiving Line Manager, Product R&D Manager, Logistics/Transport Coordinators, and Commercial/Marketing Coordinators Indirect Reports: Frontline production leads, warehouse associates, material handlers, forklift operators, and seasonal staff

Position Summary This is a hybrid (up to 3 days per week in the office in Hackensack, NJ), full-time, 12-month engagement (1099 contract). Claims and Clinical Strategy Lead will be working on claims on all marketing materials and support any up-claim opportunities for the existing portfolio of products Face, Skin and Cotton brands to ensure the products are competitive and compelling from a claims standpoint. They will partner closely across functions (e.g. marketing, R&D, Regulatory, Packaging, Legal) and with external testing laboratories and the external network of suppliers. In addition to a strong understanding of product claims, this role calls for both creativity and fluency in business acumen. Primary Responsibilities • Claims review, management of approval process, • Claims substantiations and technical memos, • Competitive claims landscaping, • Management of sample production for in-vivo and in-vitro studies, • Review of clinical and in-vitro testing reports Required Qualifications • 4 -10 years of proven industry experience (skin/personal care, cosmetics) with BS or 2- 8 years of experience with MS., • Understanding of GxPs and FDA Compliance requirements., • Excellent communication skills, including spoken and written English., • Ability to partner effectively across a diverse set of business partners and customers to deliver key results in a timely manner., • Entrepreneurial; Business owner mentality, willing to be hands-on and contribute as one team., • Critical thinking and comprehensive business acumen. Preferred Qualifications • Previous regulatory experience, • Experience with face care, skin care and skin cleansing claims substantiations, • Understanding of formulation technology and cosmetic chemistry, • Experience in formulation / product / process development in the cosmetic or drug regulatory classifications Personal Attributes • Positive and energetic individual with a business acumen and strong sense of urgency to achieve results, • Consumer-centric, creative, and design-oriented, • Inquisitive individual who has a history of seeking out best practices and successfully assimilating them into their organization, • Invokes trust, collaboration, shared accountability, and continuous improvement with the ability to quickly develop trust and loyalty at all levels in the organization and with external partners, • Knows what excellence looks like and how to get there, • Ability to develop and implement strategy, with a high bias for execution and activation in this highly hands-on organization, • Demonstrated track record of problem solving and priority setting

Job Description POSITION DETAILS Drivers/Operators data collection test vehicles. Driving assigned routes in various states/cities launching and returning from and to the customer site. Please Note: This job is full-time temporary and is expected to last 6 months to 1 year (or longer) Main Duties & Responsibilities • Each vehicle will have both a driver and operator during testing and will swap out roles per project requirements., • Data collection will be handled by the operator when not driving., • Data will need to be uploaded on daily basis or at other frequency as requested., • Drivers must be willing to travel to assigned States/Cities for testing, • Accommodations and lodging are covered, • Drivers/operators must be able to copy data from one computer directory to another., • Drivers/operators must be able to manage the data Storage., • Skillset Training will be provided, • Drivers/operators must report issues and provide simple support tasks for remote diagnosis, e.g., unplugging a clearly defined cable or pressing a switch., • The driver of the vehicle must act in a responsible and respectful demeanor as not to damage the reputation of our customer Schedule/Shift Hours: • Each vehicle will operate 6 days/week Monday - Saturday, 9-hour shifts, • Shift times and schedule are subject to change to meet data collection requirements, • First Shift - 6am - 3pm, • Second shift - 4pm - 1am, • Shift times and schedule subject to change\nCompany Description Technical Professionals Group provides validation, durability, mileage accumulation and quality testing services for vehicle and mechanized equipment projects and programs in the engineering, R&D, quality control and quality assurance sectors of the automotive industry. We set the standards others try to live up to! Technical Professionals Group provides validation, durability, mileage accumulation and quality testing services for vehicle and mechanized equipment projects and programs in the engineering, R&D, quality control and quality assurance sectors of the automotive industry. We set the standards others try to live up to!

Parallel Wireless is reimagining mobile networks with innovative, energy-efficient Open RAN solutions. Join us as we lead the future of telecommunications, driving innovation through green and sustainable networks. _. Position SummaryThe Principal Systems Engineer (Technical SME) provides senior technical leadership for U.S. Department of War and Federal wireless communications, networking, and sensing solutions. This role requires deep expertise in DoW network/communications CONOPS and mission needs, software-defined RF systems, AI/ML-enabled wireless networks, adaptive networking, and integrated communications and sensing. • Serve as principal technical authority for wireless communications, networking, and integrated communications and sensing architectures., • Primary technical support for Federal/DoW customer engagements, • Lead customer RFP technical responses and capability white papers, • Shape strategy for O-RAN–based 5G/6G, distributed sensing, and cognitive EMSO operations., • Architect software-defined RF systems integrating communications, networking, and sensing., • Design AI-driven (O-RAN RIC and applications) resilient wireless networks with adaptive resource management., • Lead solutioning, architecture, and design of multi-waveform radios, waveforms, and SDN-enabled architectures., • Conduct modeling, simulation, and performance assessments., • Advise DoW and Federal leaders on communications, networking, and sensing architectures., • Lead technical exchanges, CONOPS development, and capability road mapping., • Provide technical leadership for captures, proposals, and complex programs as Chief Engineer or Technical Lead., • Master’s or PhD in Electrical Engineering, Computer Engineering, or related field (or equivalent experience)., • 10+ years of experience in wireless (tactical and cellular) dual-use communications, networking, sensing, or cognitive systems., • System-level expertise in software-defined radio (SDR), software-defined networking (SDN/SD-WAN), and virtualized networks., • Expertise in RF communications, mesh networking, and integrated communications/sensing., • Experience with 5G/6G, O-RAN, tactical radios, and multi-domain MANET/mesh networks., • Knowledge of RF sensing, EW awareness, and spectrum operations., • Experience with DoW, NATO, and joint interoperability architectures (e.g., CMOSS, 3U-VPX)., • Knowledge of DoW and Federal communications requirements and network modernization efforts., • US citizen with the ability to obtain and maintain US security clearance., • Ability to obtain and maintain a U.S. Government security clearance, as required for the role., • Currently holding an active U.S. Secret clearance or Top Secret clearance., • Patents, Publications and standards contributions, • Prior experience as Chief Engineer, Technical Director, or Technical Fellow.Equal Employment Opportunity & AccommodationsWe are an Equal Opportunity Employer and consider applicants without regard to legally protected characteristics. If you need a reasonable accommodation to apply or interview, please let us know. Parallel Wireless is expanding the ecosystem for Open RAN with the GreenRAN™ energy-efficient Hardware-Agnostic technology. Deployed worldwide, our comprehensive 2G/3G/4G/5G Macro RAN solutions enhance network security while reducing operating expenses. As pioneers of Open RAN, we prioritize innovation, flexibility, and sustainability to help build a more connected, and green networks. Headquartered in the USA with global R&D centers, we are proud to serve over 60 customers worldwide and have been recognized with over 100 industry awards. Our mission is to accelerate GSMA’s Mobile Net Zero initiative by reducing TCO and driving innovation across the telecom more at.Parallel Wireless embraces diversity and equality of opportunity. We are committed to building inclusive and diverse teams representing all backgrounds, with a wide range of perspectives, and empowering industry-leading skills. We welcome and consider applications to join our team from all qualified candidates, regardless of their characteristics. We comply with all applicable laws and regulations on non-discrimination in employment (and recruitment), as well as work authorization and employment eligibility verification _ Wireless does not accept unsolicited resumes or applications from agencies or individuals. Please do not forward resumes to our jobs alias, Parallel Wireless employees, or any other company location. Parallel Wireless is not responsible for any fees related to unsolicited resumes/applications.

Job DescriptionDescription:Food Prep-- Private School Full Time Position Benefits Eligible Pay Rate: $20 an hour Join a welcoming private school dining team where fresh food, consistency, and teamwork make a difference every day. This full-time opportunity offers a dependable environment, benefits eligibility, and the chance to build your culinary skills while working with quality ingredients. If you enjoy staying active, preparing great food, and being part of a team that takes pride in what they serve, Brock & Company would love to hear from you. Brock & Company is the premier provider of contract food management to corporations and private and independent schools throughout the Mid-Atlantic and New England regions. Our aim is to deliver outstanding quality food services exceeding our clients’ expectations every day. With an extensive array of clients, Brock has a formula for success that is simple. We focus on top quality products combined with people who have a passion for food and service. Brock provides a family-owned, corporate supported, financially sound organization that is committed to our clients and associates and is always striving for excellence. As a member of the Brock team, you will experience a work schedule that allows for a quality of life. Our food programs are dynamic, the menus cutting edge and creative. We welcome your input to implement, solve problems, and help drive these programs to success. You can influence the outcome, and we will give you the tools to be successful. Our programs have made significant improvements in the daily work lives of our customers and clients by providing healthy, nutritious menus at all meals. The Food Prep position will prepare, cook and serve hot and cold foods determined by the supervisor. Essential Duties and Responsibilities • Perform specific jobs appropriate to the unit’s circumstances determined by the supervisor., • The assembly, operation, and disassembly of the following equipment:, • Meat and cheese slicer, food processor, R-2/Robocoupe, food choppers, and cutters, food blenders and mixers (floor and table models), • The operation of the following equipment: saute burners, convection oven, kettle steamer, warming unit, pizza oven, microwave, grill/flat top and fryer. Various size pots/pans, platters, dishes and hand held utensils, knives, mops, brooms, dust pans, buckets, cleaning towels and agents., • Comprehension and compliance of both verbal and written instructions from the supervisor., • Must be able to stand for extended periods of time., • Lifting and moving of food, food containers and other non-food items from floor position to no higher than one’s own height., • Adhere to client and company protocols related to COVID-19 workplace safety and sanitation standards., • Receive, unpack, rotate and stow deliveries per supervisor’s instruction., • Follow all outlined health and safety regulations with regard to equipment use and personal hygiene. Equal Opportunity Employer - M/F/D/V Benefits Eligible // Uniforms and Meals Provided Please respond with resume or letter of intent. PM21 Requirements: Assisting with prepping meals and supporting line during busy times.

The right individual will be a leader who establishes efficient, frequent, and collaborative communication with Operations, Process Engineering, Supply Chain, R&D, and EHS to facilitate collaboration and support of the Aspen Management System. Determine audit frequency, scope, and priorities based o

CooperSurgical is a leading fertility and women's healthcare company dedicated to putting time on the side of women, babies, and families at the healthcare moments that matter most in life. As a business unit of CooperCompanies, we're driven by a unified purpose of helping people experience life's beautiful moments. Guided by our shared values – dedicated, innovative, friendly, partners, and do the right thing – our offerings support patients throughout their lifetimes, from contraception to fertility and birth solutions, to women's and family care, and beyond. We currently offer over 600 clinically relevant medical devices to healthcare providers, including testing and treatment options, as well as an innovative suite of assisted reproductive technology and genomic testing solutions. Work location: Trumbull, CT or Livingston, NJ (on-site) The Sr. Global CAPA Engineer serves as a subject matter expert for the Global Corrective and Preventive Action (CAPA) Program, providing technical leadership, facilitation, and guidance to ensure effective investigation, root cause analysis, corrective action implementation, and effectiveness verification across CooperSurgical. This role partners with Quality, Regulatory Affairs, Operations, Manufacturing, R&D, Supply Chain, and other functional teams to support the timely execution of CAPAs, strengthen problem-solving capabilities, and drive continuous improvement across the organization. The Sr. Global CAPA Engineer is responsible for supporting the execution and effectiveness of CooperSurgical's Global CAPA Program. This role provides expert guidance to CAPA owners on investigation techniques, root cause analysis, risk evaluation, corrective action development, effectiveness verification, and documentation requirements. The Sr. Global CAPA Engineer facilitates complex and high-risk CAPAs, performs quality reviews of CAPA records, analyzes CAPA trends, and identifies opportunities to improve quality system performance. Working closely with cross-functional stakeholders, this role helps ensure CAPAs are executed consistently, effectively, and in compliance with applicable regulatory requirements and company procedures. • Provide technical guidance and support to CAPA owners throughout all phases of the CAPA process., • Facilitate complex, high-risk, and cross-functional CAPAs to ensure timely progression and successful completion., • Review CAPA records for completeness, scientific rigor, and compliance with established procedures., • Support investigation activities, root cause analysis, corrective action planning, and effectiveness verification., • Conduct quality reviews of CAPA documentation to ensure records are complete, accurate, and inspection ready., • Identify and escalate risks that may impact CAPA quality, timelines, or regulatory compliance., • Support remediation activities related to audit observations, inspection findings, quality events, and systemic issues., • Ensure CAPA activities comply with internal procedures and applicable regulatory requirements., • Monitor CAPA performance metrics, aging, and effectiveness trends., • Analyze data to identify recurring issues, systemic trends, and opportunities for improvement., • Support development of management reporting, dashboards, and CAPA performance reviews., • Recommend process improvements that enhance CAPA effectiveness and quality system maturity., • Coach CAPA owners and cross-functional teams on root cause analysis, investigation methodologies, corrective action planning, and effectiveness verification., • Deliver CAPA-related training and onboarding sessions., • Perform other duties as assigned. Travel: This position may require 10-20% domestic and/or international travel. Knowledge, Skills and Abilities: • Knowledge of 21 CFR 820, ISO 13485, EU MDR regulatory requirements., • Experience managing projects at a Global Level in a regulated environment., • Six Sigma Green Belt or above, • Strong decision-making skills, ability to influence and collaborate with cross-functional teams, • Strong technical writing skills, • Ability to provide critical review and feedback on quality records, • Ability to read and interpret technical and regulatory documentation., • Proficient in Microsoft Office applications (Word, Excel, PowerPoint)., • Effective written and verbal communication skills (English)., • Ability to work independently and collaboratively across global cross-functional teams in a regulated environment., • Ability to work in a fast-paced setting with shifting priorities while maintaining attention to detail and compliance standards. Work Environment: • Primarily office-based with regular use of computer systems and virtual collaboration tools Experience: • 5+ years of experience in medical device, pharmaceutical, biologics, or other regulated industries., • 3+ years of direct CAPA, quality engineering, quality systems, or compliance experience., • Demonstrated experience leading complex investigations and root cause analyses., • Working knowledge of FDA QMSR, ISO 13485, MDSAP, and EU MDR requirements. Education: • Bachelor's degree in biomedical engineering or related technical discipline., • ASQ Certified Quality Engineer (CQE) preferred., • Project Management Certifications preferred. Our Benefits: As an employee of CooperSurgical, you'll receive an outstanding total compensation plan. As we believe your compensation goes beyond your paycheck, we offer a great compensation package, medical coverage, 401(k), parental leave, fertility benefits, paid time off for vacation, personal, sick and holidays, and multiple other perks and benefits. Please visit us at www.coopersurgical.com to learn more about CooperSurgical and the benefits of becoming a member of our team. To all agencies: Please, no phone calls or emails to any employee of CooperSurgical about this opening. All resumes submitted by search firms/employment agencies to any employee at CooperSurgical via-email, the internet or in any form and/or method will be deemed the sole property of CooperSurgical, unless such search firms/employment agencies were engaged by CooperSurgical for this position and a valid agreement with CooperSurgical is in place. In the event a candidate who was submitted outside of the CooperSurgical agency engagement process is hired, no fee or payment of any kind will be paid. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. For U.S. locations that require disclosure of compensation, the starting base pay for this role is between $100,000.00 - $125,000.00. The actual base pay includes many factors and is subject to change and modification in the future. This position may also be eligible for other types of compensation and benefits. • Job Identification 12315, • Job Category Engineering, • Posting Date 08/17/2026, 11:32 AM, • Job Schedule Full time, • Job Shift Day, • Locations 75 Corporate Drive, Trumbull, CT, 06611, US 3 Regent St., Livingston, NJ, 07039, US (On-site), • Company CooperSurgical

Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Thea Energy is seeking a highly skilled and hands-on Electrical Technician to support the Manufacturing team in the construction, installation, and testing of electrical systems for the Eos Stellarator. The successful candidate will work directly alongside Senior Power Systems Engineers, Power Electronics Engineers, and Hardware Design Engineers to bring advanced power concepts from design to reality. This role requires a versatile technician who can seamlessly transition between supporting the build of high-current power supplies, assembling electrical distribution panels, and executing the physical installation of facility infrastructure. The technician will play a critical role in the hardware bring-up, debugging, and overall electrical integration of a cutting-edge fusion energy system. Key Responsibility Areas: • Assembly & Prototyping: Build and wire power supplies, energy storage systems, custom embedded control boards, and high-current AC-DC converters for HTS magnets., • Infrastructure Installation: Support the physical installation and cabling of MV/LV switchgear, transformers, distribution panels, and Battery Energy Storage Systems (BESS)., • Facility Support: Assist in integrating auxiliary electrical systems and balance-of-plant (BoP) infrastructure, providing electrical connections for cryogenics, vacuum, cooling, and HVAC systems., • Testing & Validation: Set up testbeds and perform hardware bring-up, signal probing, and parameter optimization under staged load conditions., • Hardware Debugging: Perform board-level debugging, soldering, and rework on custom printed circuit boards (PCBs)., • Documentation: Read, interpret, and provide field markups for single-line diagrams, schematics, wiring diagrams, and cable schedules. Ideal Experience & Skillsets: Required Qualifications • Associate's degree, trade school certification, or equivalent practical experience in Electrical Technology, Electronics, or a related field., • 5+ years of hands-on experience as an electrical technician in industrial, R&D, or high-power environments., • Proven experience building, wiring, and installing electrical distribution panels, power supplies, and control cabinets., • Strong ability to read and interpret engineering drawings, including schematics, P&IDs, and single-line diagrams., • Proficiency with lab measurement tools, including oscilloscopes, multimeters, and electronic loads., • Strong understanding of strict electrical safety standards, including LOTO protocols and NFPA 70E / NEC. Preferred Qualifications • Experience operating in fusion, accelerator, or specialized industrial R&D environments., • Familiarity with high-voltage and medium-voltage distribution equipment (transformers, protective relays, switchgear)., • Hands-on experience with PCB rework, fine-pitch soldering, and analog/mixed-signal circuit troubleshooting., • Familiarity with mechanical integration, including cable trays, conduit bending, heat sink layouts, and cooling solutions. Tools & Platforms • Measurement & Lab Tools: Oscilloscopes, multimeters, power analyzers, signal generators, logic analyzers, and electronic loads., • Assembly Tools: Soldering stations, crimpers, wire strippers, and general hand/power tools for mechanical integration., • Documentation: Microsoft 365, SharePoint, JIRA, and familiarity with navigating CAD outputs (AutoCAD Electrical, EPLAN). Company Benefits: • Base Pay Range: $32.00 – $55.00 per hour (Non-Exempt / OT Eligible), • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO Requirements: • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Create/modify 3D CAD models, subassemblies, and system layouts for new analyzers and dosers derived from existing designs. Design flow diagrams based on customer requirements and engineering specifications Design and integrate mechanical/fluidic/optical assemblies, including pumps, valves, tubing, fittings, spectrometers, light sources, optical components, electrodes, and motors, ensuring proper mounting, alignment, routing, and service access. Create and maintain BOMs to support manufacturing, service, and supply chain needs. Generate complete documentation packages as required for release (e.g., drawings, assembly instructions, installation layouts, labeling, and supporting engineering documents), aligned with internal standards. Customize designs for different chemistries (materials compatibility, wetted path considerations, sealing approaches, tubing/fitting selections, and corrosion/chemical resistance requirements). Customize designs for varying numbers of tanks and configurations (tank sizing/arrangement, mounting, plumbing routings, access/service clearances, and shipping constraints). Create facility requirements for different layouts of the systems and customers requirements. Create and process Engineering Change Orders (COs) to release new or revised parts, assemblies, and documentation; ensure traceability and accurate revision history. Support prototype builds and troubleshooting by performing fit checks, tolerance stack considerations, and root-cause investigations; propose and implement corrective actions. Bachelor's Level Degree and 0 years related work experience $85,600.00 - $145,500.00 Annually KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at talent.acquisition@kla.com or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA . Please ensure that you have searched KLA's Careers website for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to talent.acquisition@kla.com to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Regional Director of Catering Sales Job Reference Number: 43227 Employment Type: Full-Time, Hybrid Segment: Dining & Events Brand: Abigail-Kirsch Location: NY Tri State Area The Role at a Glance: The Regional Director of Catering Sales for Abigail Kirsch is responsible for the successful development and overall growth of their specific territory. The focus will be on enhancing revenue in existing and new markets and mentoring the sales team. The RDOCS will achieve individual sales revenue, in addition to contributing to the management process. The RDOCS will be a critical partner for the leadership team to achieve annual plans and address the challenges in growing the business. The RDOCS is expected to lead the pace for development of new business through proactive sales efforts. S/he must work closely with senior management in promoting the Company’s culture, mission, and philosophy. RDOCS will support new business openings and oversight as appropriate. What you will be doing: Direct Sales and Sales Management • Responsible for contributing 1.5 million in topline revenue, through independent outreach and existing network, to be spread through territory and handled by a director of catering or sales manager., • Work independently towards client outreach to develop new client relationships and to initiate sales opportunities for teams, • Attract, develop, and retain high performers and ensure communication processes are in place to actively engage with associates and manage a growing service organization, • Responsible for topline and bottom-line profitability at the unit level, through training, spot checking and holding the sales team accountable for their sales., • Maintaining that client interaction and event execution consistently align with brand standards, by ensuring that operational and culinary excellence is adhered to., • Leverage relationships across all D&E to cross sell business and refer business whenever possible, • As needed, work with HR Business Partner to coach and counsel direct reports., • Oversee, develop, and implement plan to maintain and improve existing venue contact relationships, and seek to develop new venue relationships for the off-premise market, alongside DOC if applicable., • Streamline menus and create packages/collections for all units, ensuring appropriate pricing and ensure venue specifics are accounted for, adjusting quarterly, as needed., • Mentor, train and develop sales team to grow revenue, drive business and accountability, • Maintain positive client relationships and liaison as necessary to ensure a consistently positive interaction, • Run weekly sales meetings for each of the businesses in which RDOCS has oversight, • Oversee the follow up to ensure annual events are secured on the calendar each year., • Ensure sales team is finalizing all event details throughout territory, • Responsible for sales and status reports as well as deposits/accounts receivable and contracts., • Event Coordination to include timing of events, assisting Captain(s) with staff assignments on site and meeting with staff when necessary, acting as liaison with client, kitchen, staff, and vendors., • Participate, conduct client meetings / sales calls, and follow up., • Support and Conduct tastings as needed., • Required to attend all signature galas and large-scale events, as outlined by leadership Financial Performance • Ensure that budgeted goals are met or exceeded at each unit in which RDOCS has oversight, • Monitor event revenue categories for each of the businesses in which RDOCS is overseeing, ensuring profitability., • Work with DOC’S to divide revenue goals within their teams, while directing their outreach to meet and achieve goals., • Monitor event profitability to ensure that events are sold and executed according to company standards and budget., • Ensure DOC’S are creating post event analysis to ensure the successful execution of each event in all cost areas., • Review and Report on weekly PACE report, while maintaining an actively outlook on future business, • Ensure that all event deposits, payments, and invoicing reflect the company policies and procedures, across businesses, • Monitor staffing levels on each event to ensure proper service standards are achieved and profitability maintained according to budget., • Responsible for maintaining A/R accountability for all direct reports and units Marketing This will be a collaborative approach with the Marketing to ensure the successful development of the brand. • Develop and maintain an active and aggressive advertising campaign to ensure the successful integration of the brand in the market for brands or territories, • Creating brand collateral with the Marketing department as need arises for brands or territories, • Monitor and report the results of the advertising campaigns to ensure that the expense has a significant impact on sales and brand awareness., • Oversee signature marketing events and offerings, ensuring brand integrity, • Maintain networking calendar, and ensuring sales team is actively attending with frequency, • Oversee territory market comp analysis annually, by brand, to ensure competitive offerings and pricing for the area. Technical Knowledge The RDOCS must possess a working knowledge of the systems used within the company. The DOC must be proficient in the following • Opening & closing procedures, • Profit and Loss Statements, • Producing accurate monthly reporting, • Food and beverage knowledge What we are looking for: Qualifications: • 8+ years’ of sales leadership experience, with a focus on leading robust teams with a collective revenue of over 10+ million, • Bachelor’s Degree preferred, • Advanced knowledge of off premise and venue catering sales and operations, • Strong Knowledge of food and beverage, • Exceptional interpersonal, organizational and communication skills, • Hardworking nature, hands-on approach, and a passion for the business, • Ability to communicate effectively with co-workers, management, vendors, and clients, • Able to travel and be flexible to work schedule to accommodate business needs Benefits and Salary: • Medical, • Dental, • Vision, • Tuition Reimbursement, • Voluntary UNUM offering for Accident, Critical Illness and Hospital Indemnity, • Discount Program, • Commuter Benefits (Parking and Transit), • EAP, • 401k, • Sick, • Holiday Pay (9 paid holidays) Salary: Base: About $200,000 Significant Commission Upside #boost #LI-MA1 #indeedelior About Abigail Kirsch: Started in the 1970s as a family-owned catering company, Abigail Kirsch has grown into one of New York’s premier caterers. Our steady growth has allowed us to bring our hospitality, service, and delicious food to Connecticut, Westchester, and New York City. About Elior North America: Elior North America is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. We are committed to diversity and encourage applications from people of all backgrounds and abilities. We take pride in supporting the development of our employees and their skills at all levels and in fostering an environment of growth. At Elior North America, we are committed to offering growth and advancement opportunities for all of our employees. The valuable skills and experience you’ve gained with Elior will propel you further in your career, whether with our corporate office or one of our brand segments. Disclaimer: This job description can be revised by management as needed.

Job Description About Unframe Unframe is an AI-first startup helping the world's largest enterprises bring LLM-powered applications to life in days - not months. We combine the speed of a product company with the flexibility of a consultancy, helping customers move from idea to deployed AI systems faster than anyone else in the market. With over $100M in TCV secured within 12 months, and a new $50M Series B led by Highland Europe, Unframe is rapidly scaling globally alongside Fortune 500 customers, backed by Bessemer, Craft, and TLV. About the role As a AI Transformation Architect at Unframe, you'll be the first technical voice a prospect hears. You'll join early conversations, showcase real solutions built on Unframe, and help potential customers connect the dots between their needs and our platform. You'll demo AI-powered use cases across multiple industries - from finance to cybersecurity to operations - and guide technical discovery to help prospects envision what's possible. This is a high-impact, outward-facing role at the intersection of Sales, Product and Marketing. What you'll do • Join early-stage calls with Strategic Account Executives to lead technical discovery and demos., • Deliver compelling live demos tailored to customer pain points and use cases., • Translate customer pain points into relevant AI-powered solution examples., • Communicate the value and architecture of Unframe clearly and confidently., • Build credibility and trust with prospects while becoming a strategic partner in shaping their AI vision., • Share insights with Product, Marketing, and R&D teams based on real-world conversations. What we are looking for • 5+ years experience in solutions engineering, technical pre-sales, or product management., • Strong understanding of enterprise software, APIs, and modern cloud platforms., • Confident presenting technical products to both business and technical audiences., • Excellent verbal and written communication skills in English., • Curious, collaborative, and customer-obsessed — you know how to ask the right questions and build strong relationships. Why join us? You'll help some of the world's leading companies understand and adopt AI in real, practical ways. You'll work directly with enterprise customers, lead meaningful technical conversations, and help shape how our platform is experienced in the market. You'll have real ownership, work closely with Product, Sales, and R&D, and play a key role in building what comes next in one of the fastest-moving spaces in tech.

Job DescriptionProject Manager Location: Totowa, NJ (Onsite) Employment Type: Full-Time | Exempt Department: Global Sales Reports To: Director of Project Management Position Summary We are seeking a highly organized, proactive, and customer-focused Project Manager to support cross-functional product development initiatives within the beauty and personal care manufacturing industry. This role serves as the primary liaison between customers and Englewood Lab's cross-functional teams, driving successful new product launches while ensuring projects are executed on time, within scope, and aligned with customer and business objectives. This role is ideal for an organized, proactive, and customer-focused individual who enjoys working in a fast-paced beauty manufacturing environment. The successful candidate demonstrates strong ownership, excellent communication skills, a positive attitude, and a willingness to continuously learn and support both customers and teammates. Whether you are early in your career or an experienced project manager, we are looking for someone with a growth mindset who enjoys solving problems, collaborating across different teams, and building long-term customer relationships. Primary Responsibilities Project Management • Lead and manage assigned projects from concept through commercial launch while ensuring project milestones and customer requirements are met., • Develop, maintain, and execute project timelines while proactively identifying potential timeline or quality risks and recommending solutions., • Maintain accurate project documentation, project trackers, customer records and order status., • Monitor project status and communicate updates, risks, and recommendations to customers and internal stakeholders in a timely manner., • Ensure all customer requirements are aligned with internal capabilities and business priorities., • Contribute to continuous improvement on department standards and project management processes.Customer Management, • Build strong customer relationships through proactive communication and outstanding customer service., • Schedule and lead customer meetings while documenting meeting notes, action items, and follow-up activities., • Coordinate sample submissions, quotations, regulatory requests, timelines, and other project updates/ activities., • Support successful product launches while maintaining a high level of customer satisfaction.Cross-Functional Collaboration, • Partner closely with cross functional teams including Business Development, R&D, Supply Chain, Quality, Regulatory, Operations, Purchasing, and Production to ensure successful project execution., • Participate in Gate Review meetings and collect all necessary information and samples for internal cross-functional communication., • Support line trials, production activities, and customer visits when required., • Support customer complaint investigations by gathering all necessary information from customer and working closely with Quality to support timely resolution., • Escalate project risks appropriately while providing recommendations and potential solutions.Business Support, • Initiate Product Development Requests (PDRs) by gathering project requirements, including product type, target COG, target launch timing, formula or packaging requirements, customer specifications, and other project details., • Coordinate quotation requests, review pricing for accuracy, and communicate approved quotations to customers.Ensure approved pricing is transferred accurately to the BOM/PO Coordinator, • Monitor account activities and identify potential risks, opportunities, or changes that may impact project success., • Support Business Development by identifying opportunities for account growth and maintaining excellent customer relationships., • Perform other duties as assigned.Qualifications 1) Required Qualifications, • Bachelor's degree or equivalent work experience, • 1–5 years of experience in Project Management, Supply Chain, Manufacturing, or a related field., • Excellent organizational, communication, and time management skills., • Strong interpersonal skills with a positive, customer-focused, and team-oriented attitude., • Ability to manage multiple priorities in a fast-paced manufacturing environment., • Strong analytical, critical thinking, and problem-solving skills., • Proficiency in Microsoft Office (Excel, Outlook, Word, and PowerPoint).2) Preferred Qualifications, • Experience in beauty, contract manufacturing, or other manufacturing industries., • Ability to speak Chinese and/or Korean is preferred but not required., • Experience working with cross-functional teams and managing multiple customer projects simultaneously.Compensation $65,000 – $85,000 annually Actual compensation will be determined based on experience, qualifications, skills, and internal equity. This position is also eligible for the company's discretionary bonus program. Work Schedule • Onsite position based in Totowa, New Jersey., • Monday through Friday, Full-Time.Benefits, • Medical, Dental & Vision Insurance, • Company-paid Life, AD&D and Disability Insurance, • 401(k) with Company Match, • Paid Time Off (PTO), • Paid Company Holidays, • Special Paid Leave for Personal Events, • Employee Referral Program, • Year-End Gift, • Additional benefits as outlined in the Employee HandbookEqual Opportunity Employer Englewood Lab, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, pregnancy, veteran status, or any other characteristic protected by applicable federal, state, or local law. Englewood Lab provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable law. Powered by JazzHR lpTEbOOIEV

Job Description Position Summary TreadStone Technologies is seeking a Mechanical Design Engineer to support the design, development, testing, and commercialization of equipment and components used in our advanced coating and electrochemical technology programs. This position combines mechanical engineering and design with hands-on work in an advanced materials and manufacturing environment. The ideal candidate will have strong CAD and mechanical design experience along with an understanding of electrochemistry, materials, manufacturing processes, or electrochemical systems. The engineer will work closely with technical leadership, manufacturing, and R&D to take concepts from initial design through prototyping, testing, modification, and production implementation. Responsibilities • Design mechanical components, assemblies, fixtures, tooling, and production equipment, • Develop detailed 3D CAD models, assemblies, and engineering drawings, • Translate engineering concepts and process requirements into manufacturable mechanical designs, • Design and modify fixtures and tooling used in coating, testing, fabrication, and production processes, • Support prototype development, assembly, testing, and design validation, • Perform engineering calculations, tolerance analysis, and design reviews, • Work with manufacturing personnel to troubleshoot equipment and process-related mechanical issues, • Develop design improvements that increase reliability, repeatability, quality, and manufacturing efficiency, • Select appropriate materials, components, hardware, and manufacturing methods, • Create and maintain drawings, specifications, bills of materials, and engineering documentation, • Support testing and development of components used in electrochemical systems, • Collaborate with scientists and engineers working with coatings, metals, electrochemistry, and advanced materials, • Support equipment installation, commissioning, modification, and continuous improvement, • Work with vendors and fabricators to source and manufacture custom components, • Participate in root-cause analysis and resolution of technical and quality issues, • Support the transition of R&D processes and equipment into scalable manufacturing Qualifications • Bachelor's degree in Mechanical Engineering or a related engineering discipline, • Professional experience in mechanical engineering, mechanical design, product development, equipment design, or a related role, • Strong proficiency with 3D CAD software, • Experience producing detailed engineering drawings and manufacturing documentation, • Strong understanding of mechanical design principles, materials, tolerances, and manufacturing processes, • Ability to design components and assemblies with manufacturability and reliability in mind, • Hands-on mechanical aptitude and problem-solving ability, • Ability to work effectively across engineering, R&D, manufacturing, and quality functions, • Strong analytical, organizational, and communication skills Preferred Qualifications • Knowledge or experience in electrochemistry or electrochemical systems, • Experience with fuel cells, electrolyzers, batteries, energy storage, or related technologies, • Experience with metals, specialty coatings, surface treatments, or materials science, • Experience designing manufacturing equipment, fixtures, tooling, or test systems, • Experience in prototype development and transitioning designs into production, • Familiarity with quality systems and engineering change/document-control processes, • Experience working in an R&D or advanced manufacturing environment About TreadStone Technologies TreadStone Technologies develops and manufactures patented specialty coatings engineered for demanding electrochemical applications, including fuel cells, PEM electrolyzers, and flow batteries. Our technologies combine materials science, electrochemistry, mechanical engineering, and advanced manufacturing to improve corrosion resistance, electrical conductivity, durability, and performance of critical metal components. This position offers the opportunity to work directly with innovative technology as it moves from engineering development and testing into commercial-scale manufacturing. \nCompany Description Whether you're evaluating coating technologies for a new program, ready to initiate supplier qualification, or looking for a production partner for an existing electrolyzer, fuel cell, or flow battery platform, TreadStone's team of materials science and manufacturing engineers is ready to engage. We move fast. Send us your application requirements and we'll respond with the right coating recommendation, an NDA, and a path to qualified evaluation samples. Response time: days, not weeks. Whether you're evaluating coating technologies for a new program, ready to initiate supplier qualification, or looking for a production partner for an existing electrolyzer, fuel cell, or flow battery platform, TreadStone's team of materials science and manufacturing engineers is ready to engage. We move fast. Send us your application requirements and we'll respond with the right coating recommendation, an NDA, and a path to qualified evaluation samples. Response time: days, not weeks.

Job Description About the Company A well-funded health technology startup is developing a first-of-its-kind wearable biosensor platform for continuous, non-invasive health monitoring. This is an early-stage, high-impact opportunity to shape the hardware foundation of a platform with significant implications for chronic disease management and personalized medicine. Position Overview The company is looking for a hands-on Electrical Engineer to join a small, fast-moving R&D team. This role sits at the intersection of analog circuit design, wireless communication, and miniaturized sensor hardware. You'll own critical aspects of the electrical architecture for an ultra-compact biosensor platform and work closely with cross-functional teams spanning materials science, firmware, and clinical research. Key Responsibilities • Design, prototype, and iterate on analog and mixed-signal circuits for biosensor signal acquisition and conditioning, • Develop and optimize low-power circuit architectures suitable for miniaturized, body-worn devices, • Select and evaluate components for size, power consumption, biocompatibility, and performance in an oral environment, • Lead PCB layout and schematic design for compact, multi-layer boards, • Integrate and validate Bluetooth Low Energy (BLE) or similar short-range wireless communication modules for real-time data transmission, • Characterize sensor performance across relevant biological and environmental conditions, • Collaborate with firmware engineers to define hardware-software interfaces and support embedded system integration, • Develop and execute verification and validation protocols for electrical subsystems, • Contribute to design documentation, IP development, and regulatory submission materials (FDA, CE), • Support design for manufacturability (DFM) efforts as the platform matures toward commercial production, • Stay current on emerging technologies in wearable electronics, biosensing, and wireless health platforms, • Perform other duties as the role evolves in a startup environment Qualifications Required: • Bachelor's degree in Electrical Engineering, Biomedical Engineering, or a closely related field, • 3+ years of hands-on experience in hardware or electricalengineering, with at least some R&D or product development exposure in the medtech space., • Proficiency in analog and mixed-signal circuit design., • Experience with PCB design tools such as Altium., • Familiarity with wireless communication protocols, particularly Bluetooth Low Energy (BLE)., • Strong understanding of low-power design principles for battery-operated or energy-harvesting devices., • Comfortable working in an ambiguous, fast-paced startup environment with limited resources., • Strong problem-solving skills and a bias toward building and testing over theorizing. Preferred: • Experience developing medical devices or wearable consumer electronics, • Familiarity with FDA design controls, IEC 60601, or similar regulatory frameworks, • Background in electrochemical sensing, impedance spectroscopy, or biosignal acquisition, • Experience with miniaturization challenges and packaging constraints for body-worn hardware, • Exposure to MEMS, flexible electronics, or chip-scale integration What You'll Be Part Of This is a ground-floor opportunity to join a small, technically ambitious team working on technology with the potential to redefine how health data is collected and used. The ideal candidate thrives in environments where they can own problems end-to-end, wear multiple hats, and see their work directly shape a product. You'll have a meaningful seat at the table from day one. Opportunity offers: Base Pay + Equity Equal Opportunity Statement This employer is committed to building a diverse and inclusive team. All qualified applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected under applicable federal, state, or local law.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description Broad Function and Purpose of Position: To oversee the daily operations of the Quality Lab including all quality testing, auditing, and inspection activities. As an integral part of the Quality team, this position will be challenged to assure and improve product quality through prevention. • Provides training and supervision to Quality Control Technicians., • Provides required reports to internal customers., • Oversees QIR system including customer return analysis., • Oversees incoming product inspection and releases., • Implement new test equipment and methods as necessary., • Provide assistance and support to Quality Engineers as required. Support projects related to introduce new materials, packaging, products and processes., • Maintains QMS document records including SOP/SQP/SMS per Sika procedures., • Monitors plant adherence to policies and procedures using formal audits., • Maintains and orders supplies for QC laboratory., • Monitors and ensures that all direct and indirect reports perform their duties in a safe manner., • Advises production managers and supervisors of quality issues requiring attention., • Utilize statistics to evaluate weaknesses and preventive actions., • Perform other projects as required; Automotive (re-) domestications efforts and plant troubleshooting & investigations., • Perform other assignments as required. Annual Salary Range: $85,000-$97,000 based on experience, and qualifications of the applicant. Qualifications Qualifications/Experience: • BS or advanced degree in Chemistry, Chemical Engineering and/or process optimization, • R&D or Quality lab experience preferred (Automotive specifically desired)., • Ability to work a flexible work schedule or off shift., • Years Experience: 3 years minimum experience in supervision., • Understand the ISO9001 and IATF 16949 is plus., • PC skills (Microsoft Word, Excel, and Access)., • Excellent interpersonal skills (oral and written) and a dedication to team success. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. All your information will be kept confidential according to EEO guidelines. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Join Cibo Vita We’re Cibo Vita, makers of Nature’s Garden premium healthy snacks in Totowa, NJ. Our mission is to help consumers Snack With Purpose through products that elevate wellness, support sustainability, and deliver standout flavor and function. Is this you? • Are you a hands-on leader who loves guiding mechanics to peak performance?, • Do you reduce downtime through smart maintenance, sharp troubleshooting, and lean thinking?, • Can you collaborate across Production, QA, and R&D to solve tough technical problems? Your impact, • Lead an engineering mechanics team committed to safety, reliability, and efficiency on the production floor., • Own installation, maintenance, and repair activities to keep equipment running and productivity high., • Implement process improvements to improve product quality, reduce waste, and increase manufacturing efficiency., • Partner with cross-functional teams (Production, Quality Assurance, R&D) to diagnose and resolve issues., • Design and execute a preventive maintenance program for critical assets., • Maintain adherence to local, state, and federal regulations governing food safety, equipment, and environmental standards., • Manage capital projects—equipment upgrades, process changes, and system enhancements—from plan to completion., • Provide training and mentorship that strengthen technical skills across the plant., • Monitor budgets and recommend cost-effective solutions for equipment and process improvements., • Advance automation, data-driven decision making, and lean manufacturing practices., • Evaluate and propose new technologies to elevate operational performance and product excellence. What you bring, • Bachelor’s degree in Mechanical, Electrical, Industrial Engineering, or related field preferred; equivalent practical experience welcome., • 5+ years in engineering, maintenance, or supervisory roles within food manufacturing or a similar industrial setting., • Knowledge of food production equipment, processes, and food safety requirements., • Demonstrated success supervising maintenance or engineering mechanics and running technical projects., • Background in process optimization, lean manufacturing, and continuous improvement., • Competence with electrical, mechanical, pneumatic, hydraulic, and automation systems., • Resourceful troubleshooter who thrives in fast-moving environments., • Strong communication and cross-functional collaboration skills., • Experience with AutoCAD, SolidWorks, and MES is a plus., • Project management capability with multiple priorities and deadlines., • Interest in sustainability practices and passion for innovation in the food industry. Why Cibo Vita, • Medical, Dental, and Vision Benefits, • Life Insurance, • 401(k), • PTO, • Company Paid Holidays, • Career advancement and training Where you’ll work On-site at our Totowa, NJ facility.

Job DescriptionTitle: Chemist Department: R&D - Skincare Level: Junior Level / Entry Level Responsibility Summary: The Chemist will be responsible for analyzing batches, measuring physical parameters such as Viscosity, pH, and Density, interacting with vendors, documenting, collaborating with supervisor, and entering formulation. Responsibilities: The Chemist supports the R&D Skincare team through a variety of tasks, including: • Maintain an accurate and up-to-date lab notebook., • Prepare and make lab batches., • Create qualitative and quantitative ingredient lists., • Check next-day specifications against the previous day's batch., • Follow up on ongoing stability studies and report observations., • Analyze lab batches by measuring physical parameters: viscosity, pH, and density., • Enter formulations into the company's formulation system., • Communicate with raw material vendors and attend in-house vendor presentations., • Manage time effectively to meet batch, testing, and project deadlines., • Assist in the formulation and development of innovative skin care products, including line extensions and product improvements., • Collaborate cross-functionally with departments such as QA, Regulatory, Production, and Marketing., • Review results and progress regularly with the supervisor., • Maintain laboratory equipment and ensure proper organization of raw materials and samples., • Follow all laboratory safety, GMP, and internal quality standards. Qualifications: • Bachelor's degree in Chemistry (or Biology with coursework in general and organic chemistry)., • 0–3 years of experience in R&D, formulation, and emulsions, ideally in skin care product development., • Well organized and highly detail-oriented., • Strong understanding of cosmetic raw materials, formulation principles, and production equipment., • Strong time management and organizational skills., • Genuine interest and passion for cosmetics and skin care product development., • Ability to lift and carry up to 10–15 pounds. Compensation & Benefits: The approximate pay range for this position is $60,000 - $68,000. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities. The benefit package includes: • Medical, Dental, Vision, • Life/AD&D Insurance, • Paid Time Off (PTO), • Special Paid Leave for employees’ personal events, • Company Paid Holidays, • 401(k) with employer match, • Year-End Gift Powered by JazzHR Fi9EsJFF0m

Job DescriptionTitle: Sr. Chemist - Skincare/Color Reports to: Chief Scientific Officer Department: R&D – Skincare Responsibility Summary: The Sr. Chemist is responsible for leading the development of innovative skincare formulations while supporting business and client needs. This role oversees product development from concept through scale-up, ensures compliance with regulatory requirements (including OTC and color), and provides technical leadership by mentoring junior chemists. The position also involves collaboration with cross-functional teams and customers, evaluation of new materials and technologies, and support within both laboratory and production environments to ensure high-quality, market-ready products. Responsibilities: The Sr. Chemist is responsible for supporting the company's business events through a variety of tasks, including: • Formulate and facilitate development of innovative skin care products, line extensions, and product improvements., • Supervise, mentor, teach, and lead junior chemists in skincare cosmetics formulation., • Proactively scan and research new concepts, materials, technical opportunities and partnerships., • Work in the production environment whenever necessary., • Work with project managers/customers to develop the product forms and shade palettes they expect., • Understand and comply with color regulations., • Developing stability protocols for skincare products and monitor product stability., • Advise on lab equipment needs., • Perform other duties as assigned by manager.Qualifications:, • BS in Chemistry or higher in a related field., • Minimum of 8 years in developing R&D skin care formulations., • Must have experience in OTC product development., • SPF and color formulation experience is preferred., • Strong understanding of formulations and scale-up., • Have good understanding of production equipment and their uses., • Have a good understanding of the raw materials used in skincare cosmetics., • Ability to lift and carry up to 10-15 pounds.Compensation & Benefits: The approximate pay range for this position is $80,000 - $110,000. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities. The benefit package includes: • Medical, Dental, Vision, Life, • PTO, • Special Paid Leave for employees’ personal events, • Company Paid Holidays, • 401(k) employer match, • Year-End G Powered by JazzHR 0hzau6GAfk

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing, • Certifications such as U, S, or R stamps, GD&T training, or ASME code familiarity Experience with thermal piping, industrial utilities, system integration, or plant-level equipment would be beneficial for success in this role. Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking for an experienced, organized, and motivated systems engineer. This position will work on an interdisciplinary team to integrate numerous first-of-a-kind technologies while developing scalable processes and procedures. The Systems Engineer will be responsible for the managing requirements, integration, and interfaces for one of the most consequential and cutting-edge technologies of our generation - fusion energy. The Thea Energy team is comprised of self-motivated, innovative, and collaborative individuals with an excitement for solving complex problems. This is a challenging position that requires a high degree of autonomy, and the ideal candidate must be able to move quickly. A proven track record of leading systems engineering, excellent communication skills, and a passion for new technologies and innovation is required. Key Responsibility Areas: • Develop system and interfacing requirements, protocols, and procedures, • Work closely with engineering and physics teams designing various systems to provide engineering coordination and support, • Ensure the efficient and systematic conversion of functional requirements into a scalable system architecture and execution strategy, • Assist in the management of technical, schedule, cost, and performance analysis for various development programs, • Develop and enact protocols to inform clear and efficient decision making processes, • Manage updates and changes to systems and interfaces, and monitor impacts to program schedule, cost, and performance, • Manage system configuration control, • Manage the product breakdown structure, • Coordinate with suppliers, vendors, and internal manufacturing engineering teams, • Coordinate design reviews and program management functions, • Institute the processes for, and help run HAZOPS and FMECA programs, • Implement an effective design integration program, • Develop and manage effective processes for making and tracking key decisions, • Develop and implement verification and validation processes, • Implement system design lifecycle management processes Ideal Experience & Skillsets:, • Bachelor's degree in a relevant engineering field, • 5+ years of experience in systems engineering, • Proven experience integrating large industrial and /or first-of-a-kind R&D projects (e.g. power plants, manufacturing facilities, particle accelerators, etc.), • Experience across mechanical, electrical, and fluid systems, • Experience with cryogenic, heating, fluid, vacuum, power electronics, and control systems is preferred but not mandatory, • Familiarity with the processes needed to build, test, troubleshoot, and scale complex mechanical and electrical systems, • Strong communication, collaboration, and interpersonal skills, • Ability to innovate, execute, and flourish in a fast-paced environment, • Exceptional work ethic, • Prioritization of safety above all else, • Ability to wear many different hats, • Team player who is excited to help others, • Ability to occasionally lift objects up to 50 lbs. #LI-CB1 Company Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Title: Senior R&D Chemist Department: Research & Development Reports To: R&D Lab Supervisor Location: Newark, NJ area Position Summary The Senior R&D Chemist is responsible for the research, formulation, development, testing, and commercialization of innovative adhesive, coating, sealant, encapsulating, and polymer systems. This role supports customer-driven development projects while improving existing products, providing technical expertise to Manufacturing and Sales, and ensuring compliance with company quality systems. The position requires strong technical knowledge, problem-solving skills, and the ability to manage multiple projects from concept through commercialization. Qualifications • Bachelor's degree in Chemistry, Polymer Science, Chemical Engineering, Organic Chemistry., • Master's or Ph.D. in Polymer Chemistry, Organic Chemistry a plus. Knowledge, Skills & Abilities • Strong understanding of polymer chemistry and formulation principles., • Experience with laboratory testing methods and analytical equipment., • Ability to independently design experiments, analyze data, and solve technical problems., • Excellent written and verbal communication skills., • Strong organizational and project management skills., • Ability to manage multiple projects while meeting deadlines., • Proficiency with Microsoft Office and laboratory documentation systems., • Knowledge of AS9100 and ISO 9001 quality systems preferred. Essential Duties and Responsibilities • Develop new adhesive, coating, sealant, potting, and encapsulating formulations to meet customer and market requirements., • Improve existing products by optimizing performance, manufacturability, cost, and regulatory compliance., • Design experiments, evaluate results, and recommend formulation improvements., • Research emerging raw materials and technologies to support product innovation. Product Commercialization • Lead laboratory development through pilot-scale trials and full manufacturing implementation., • Support production scale-up activities and validate manufacturing processes., • Prepare technical documentation, product specifications, and development reports. Technical Support • Evaluate and qualify new raw materials and alternative suppliers., • Support Manufacturing by troubleshooting production issues, resolving formulation-related deviations, and improving process efficiency., • Provide technical support to Sales and Customer Service regarding product selection, customer trials, and technical inquiries., • Lead or participate in customer meetings and assist with technical presentations when required. Quality & Compliance • Maintain accurate laboratory notebooks, test records, and project documentation., • Ensure compliance with AS9100, ISO 9001, safety, environmental, and regulatory requirements., • Maintain laboratory equipment and ensure calibration and preventive maintenance requirements are met., • Follow all company safety policies and laboratory procedures. Teamwork & Leadership • Collaborate effectively with Manufacturing, Sales, Quality, Purchasing, and Operations., • Mentor junior laboratory personnel as assigned., • Contribute ideas for continuous improvement within the laboratory and throughout the organization., • Demonstrate professionalism, accountability, and a customer-focused approach in all interactions.

Job Description Overview Are you looking for a career you can feel good about? We hire only those that strive to do their best. By joining our family, you'll receive the honor and recognition that comes with working for the industry's global leader in evidenced based rehabilitation. Who We Are: GEO provides complementary, turnkey solutions for numerous government partners worldwide across a spectrum of diversified correctional and community reentry services. From the development of state-of-the-art facilities and the provision of management services and evidence-based rehabilitation to the post-release reintegration and supervision of individuals in the community, GEO offers fully diversified, cost-effective services that deliver enhanced quality and improved outcomes. Why Work for GEO: • We believe that work is more than a place you go to every day. It is about being inspired and motivated to achieve extraordinary things., • Employee benefits play an important role in making The GEO Group a great place to work. At GEO, we believe in the three pillars of employee wellbeing: physical, emotional, and financial. With comprehensive benefits and competitive wages, we trust that you will find all the resources you need here to be successful. Responsibilities Role and Responsibilities: Your primary role is to evaluate and diagnose inmates/detainees/residents (I/D/R) for mental, emotional, and behavioral disorders. In this role, you will: • Co-ordinate mental health functions (including supervising and training staff members)., • Examine and treat detainees/inmates referred by the nursing/professional staff to ensure proper injury care, disease prevention, diagnosis, treatment, and recovery., • Provide psychotherapy or counseling for psychological disorders or mental illness., • Make appropriate referrals as necessary to a psychiatrist., • Evaluate I/D/R’s mental status and symptoms in determining the need for transfer or placement under observation due to suicide risk., • Make referrals to the appropriate professional should the I/D/R exhibit side effects., • Document services provided and comprehensive notes in the patient medical records., • Instruct staff and officers in recognizing suicide risk factors., • Provide in-service education for medical and correctional staff as required. Qualifications Competencies Required: Acute awareness, critical thinking ability, and strong communication skills are key qualities we look for. Our employees feel proud to play a role in our patients’ re-entry to society. Apply if the following apply to you: Minimum Requirements: • PhD or PsyD in Psychology from an accredited University. Current license in Psychology in the State in which the facility is located or licensure/certification in accordance with the contract requirements., • Two (2) years of correctional work experience is preferred., • Must hold a current license or certification in Psychology in the state in which the facility is located. Maintains a current copy of license on file at the facility at all times., • Must be at least twenty-one (21) years of age. Physical Requirements: • Frequently: Lift or carry up to 10 lbs.; walk, stand, bend, stoop and sit., • Occasionally: Lift or carry/push or pull up to 40 lbs. Climb, reach above shoulder level and work with machinery. GEO Secured Services

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are looking for a Senior Electromechanical Engineer specializing in Web Handling in Reel-to-Reel (R2R) processes to lead the development of our core manufacturing infrastructure. This is a high-impact role where you will be responsible for the architectural design of the automated systems that process our proprietary superconducting magnets. You will act as the technical authority for web-handling and tension-control systems, guiding the transition from R&D prototypes to high-reliability industrial production lines. Key Responsibility Areas • Design the hardware and controls for bespoke reel to reel process machines, ensuring seamless integration between high-precision mechanical assemblies and complex control software. • Serve as the Subject Matter Expert (SME) for machine design enabling roll to roll tension control, web handling and steering, winding dynamics, and in-line process modules, providing technical guidance to the manufacturing and design teams., • Scope and design electromechanical equipment to handle fragile high temperature superconducting tape with zero-defect tolerance., • Manage external vendors and integrators for the fabrication of large-scale equipment, ensuring adherence to Thea Energy’s rigorous performance and safety standards., • Design and implement advanced in-line inspection systems (e.g., computer vision, laser interferometry) to capture high-fidelity process data during continuous manufacturing., • Develop long-term strategies for manufacturing throughput, identifying bottlenecks in the R2R process and implementing automated solutions to increase yield and reliability. Ideal Experience & Skillsets • BS, MS, or PhD in Mechatronics, Mechanical Engineering, Electrical Engineering, or related fields., • 8+ years of experience in the electromechanical design and commissioning of complex reel-to-reel equipment, preferably in delicate material applications (e.g., semiconductor, battery electrode, or specialized aerospace)., • Expertise with Beckhoff/TwinCAT 3, EtherCAT, and structured text programming. Experience with "Taper Tension" and specialized winding algorithms is highly desired., • Expertise in 3D CAD (NX preferred) and the use of FEA or multibody dynamics simulation to validate machine designs., • Ability to solve "first-of-a-kind" engineering challenges where no off-the-shelf solution exists. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Recruiter.com is revolutionizing the hiring landscape by streamlining recruitment processes and enhancing the job search experience for both employers and candidates. As part of a distinguished family of workplace solution companies, we work alongside Employer.com & Job Mobz, which specializes in talent acquisition services; BountyJobs, the leading marketplace for recruitment agencies; Bench Accounting, providing seamless financial management; and Before You Apply, offering comprehensive employer branding capabilities. Job Description We are seeking an experienced Recruiter to support hiring across a diverse mix of Research & Development, Sales, and Corporate functions for an established, global organization in the specialty ingredients and life sciences industry. The organization develops and manufactures innovative, science-based solutions used across industries including human nutrition, health and wellness, food and beverage, pharmaceuticals, and animal nutrition. This is an opportunity to partner closely with business leaders in a highly technical, product-driven environment where recruiting needs range from specialized scientific talent to commercial and corporate professionals. This position is hybrid and requires three days per week onsite in the company’s northern New Jersey office. Key Responsibilities • Manage full-cycle recruiting across R&D, Sales, and Corporate functions, from intake through offer acceptance., • Recruit for a variety of positions, which may include scientists, chemists, product development and technical professionals, sales and commercial talent, and corporate functions., • Partner directly with hiring managers to understand business needs, role requirements, candidate profiles, and recruiting priorities., • Develop targeted sourcing strategies for specialized and difficult-to-fill positions., • Proactively identify and engage passive candidates through LinkedIn and other sourcing channels., • Conduct candidate screens and provide thoughtful recommendations to hiring teams., • Manage interview processes, candidate communication, feedback, and offer coordination., • Maintain accurate recruiting activity and candidate information within the ATS., • Provide hiring managers with market insights and help calibrate expectations around talent availability, compensation, and search strategy., • Deliver a strong candidate experience while balancing multiple searches and stakeholder priorities. Qualifications • 5+ years of full-cycle recruiting experience, ideally within a corporate or embedded recruiting environment., • Demonstrated experience recruiting across multiple functions; experience supporting R&D/scientific, technical, sales, or corporate hiring is strongly preferred., • Experience recruiting within life sciences, chemicals, food/ingredients, pharmaceutical, biotechnology, manufacturing, or another technical/scientific industry is highly desirable., • Strong sourcing skills and demonstrated ability to recruit specialized or hard-to-find talent., • Comfortable partnering directly with hiring managers and senior stakeholders., • Ability to manage multiple requisitions and shifting priorities in a fast-paced environment., • Strong communication, organization, and candidate-management skills., • Comfortable working independently while collaborating with a broader Talent Acquisition and HR team. Work Arrangement • Hybrid – 3 days per week onsite in Northern New Jersey This role is best suited for a recruiter who enjoys variety and can move comfortably between highly technical R&D searches, commercially focused Sales hiring, and broader Corporate recruiting needs. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionTitle: New Business Development Manager Department: Global Sales Function: New Business Development Reports to: Director of New Business Development Summary: The New Business Development Manager is part of the Global Sales department under the New Business Development team and reports directly to the Director of New Business Development. This position is responsible for supporting and driving new business growth by managing customer relationships, identifying new opportunities, coordinating cross-functional activities, and supporting strategic business development initiatives. The Manager will play a key role in expanding Englewood Lab’s customer base by working closely with prospective and existing clients, internal departments, and external partners. This role requires strong communication, organizational, and project management skills, along with the ability to independently manage opportunities from initial inquiry through project transition. Responsibilities: Responsibilities include, but are not limited to: • Support the Director of New Business Development in executing strategic business development initiatives and customer growth opportunities., • Manage customer communications, inquiries, follow-ups, and relationship-building activities with prospective and existing clients., • Identify and develop new business opportunities through networking, industry research, referrals, trade shows, and customer outreach., • Coordinate and track customer requests, sample submissions, quotations, project timelines, and pending action items., • Work cross-functionally with R&D, Marketing, Project Management, Operations, Customer Service, Regulatory, and other internal departments to support customer needs and project progression., • Lead internal coordination efforts related to new customer opportunities and ensure timely follow-up and communication., • Prepare and present capability presentations, innovation proposals, product recommendations, and customer meeting materials., • Support customer visits, presentations, plant tours, and onsite meetings., • Manage trade show planning and execution, including booth coordination, lead tracking, customer meetings, and post-show follow-up activities., • Monitor and maintain organized records of customer communications, lead pipelines, sample activity, and business development reports., • Assist with forecasting potential business opportunities and provide regular updates to management regarding pipeline status and customer activities., • Support the transition of awarded projects to Project Management and Operations teams to ensure smooth onboarding and execution., • Represent Englewood Lab professionally at customer meetings, networking events, trade shows, and industry events., • Mentor and provide guidance to junior team members or associates as needed., • Stay informed on market trends, customer needs, competitive activity, and industry developments within the beauty and personal care industry. Qualifications / Skills: • Bachelor’s degree preferred, ideally in Business, Marketing, Science, or a related field., • 3–6 years of experience in business development, sales, account management, customer service, project management, cosmetics, beauty, personal care, OTC products, or contract manufacturing industries preferred., • Experience within cosmetics manufacturing, CDMO/CMO, skincare, or beauty industry strongly preferred., • Strong customer relationship management and communication skills., • Excellent organizational skills with the ability to manage multiple projects, timelines, and customer requests simultaneously., • Ability to work cross-functionally and collaborate effectively with internal and external stakeholders., • Strong problem-solving and follow-up skills with attention to detail., • Proficient in Microsoft Office, including Outlook, Excel, PowerPoint, and Teams., • Ability to prepare professional presentations and customer-facing materials., • Strong understanding of project coordination and customer support processes., • Ability to travel for customer meetings, trade shows, and company events as needed., • Self-motivated, team-oriented, proactive, and results-driven., • Interest in beauty, skincare, cosmetics, OTC products, and contract manufacturing preferred. Compensations & Benefits: • Pay Range: $70,000 - $85,000This is a full-time position, 5 days per week (M–F), from 9:00 AM to 6:00 PM in Totowa, NJ. Benefits • Medical, Dental, Vision, • Life/AD&D Insurance, • Paid Time Off (PTO), • Special Paid Leave for employees’ personal events, • Company Paid Holidays, • 401(k) with employer match, • Year-End Gift Powered by JazzHR 6Qq5YKF5T8

Job Description Job Summary: Conducts Product and R&D testing. Primary Responsibilities: Set up test apparatus and conduct and document test of product following established methods, procedures, standards and sequences to confirm compliance with quality standards and customer requirements. Work Environment: The employee is regularly exposed to hazardous chemicals, high pressures and temperatures, high decibel noise, explosive materials, and explosive devices while using appropriate test procedures and personal protective equipment. • Set up test apparatus and conduct and document R&D test of devices under direction of Project Engineer., • Maintain records on work performed, analyzes data collected, and reports results., • Follows procedures as defined by CAD policies, procedures, and ISO9001:2000/AS 9100C requirements., • Maintain confidentiality of all information processed., • Represent Company in a positive manner., • Support and adhere to Company's Code of Conduct and Ethics Policy. Performs related duties as assigned or required . Regular and consistent attendance is required. Essential Skills: Subject Matter Understanding. Analytical. Records Management. Computer Applications. Critical Thinking. Problem Solving. Decision Making. Ability to effectively communicate both verbally and in writing. Work within established safety and quality standards. Ability to work cooperatively in a team environment. Job Qualifications: Required: Minimum 5 years relevant experience. Ability to read, understand and execute test procedures. Use of oscilloscope, and associated test equipment is essential. Knowledge of mechanical systems and hardware, computer hardware and software, and hydraulic and pneumatic systems. Good mechanical skills and dexterity. Must be able to pass an ATF "Responsible Party" background check.. Preferred: Background in Electrical/Mechanical testing environment.

Job DescriptionTitle: Chemist Reports to: Director of Color & Innovation Department: R&D - Color Responsibility Summary: The Chemist will be responsible for analyzing batches, measuring physical parameters such as Viscosity, pH, and Density, interacting with vendors, documenting, collaborating with supervisor, and entering formulation. Responsibilities: The Chemist is responsible for supporting the company's business events through a variety of tasks, including: • Maintain a lab note book., • Make batches., • Create ingredient qualitative and quantitative list., • Check next day specification from previous day batch., • Follow up with on-going stabilities., • Communicate with raw material vendors., • Attend in-house vendor presentations., • Enter formulation into the company formulator., • Review results with supervisor., • Analyze lab batch measuring physical parameters: Viscosity, pH, and Density., • Assist in the formulation and development of innovative skin care and color cosmetic products, including line extensions and product improvements., • Support in color matching and formulation adjustments., • Support compliance with color regulations and internal quality standards., • Maintain laboratory equipment and ensure proper organization of raw materials and samples. Qualifications: • Bachelor’s degree in Chemistry (or Biology that has had chemistry and organic chemistry classes)., • 2- 5 years of experience in R&D, formulation, emulsions, and other forms of color product formulations., • Well organized and highly detail oriented., • Must work well with others and communicate effectively., • Strong understanding of cosmetic raw materials, formulation principles, production equipment., • Strong color matching skills., • Ability to lift and carry up to 10-15 pounds. Compensation & Benefits: The approximate pay range for this position is $60,000 - $68,000. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities. The benefit package includes: • Medical, Dental, Vision, • Life/AD&D Insurance, • Paid Time Off (PTO), • Special Paid Leave for employees’ personal events, • Company Paid Holidays, • 401(k) with employer match, • Year-End Gift Powered by JazzHR As9zTT4HPe

Job DescriptionDescription: At Color Street and Innovative Cosmetic Concepts, we believe one brilliant idea can change everything. Our revolutionary, patented, real nail polish strips and ever-expanding line of premium beauty products empower beauty lovers around the globe and inspire our community of Independent Stylists to express themselves in full color! We are currently looking for a R&D Lab Coordinator to work together with the Production, Quality and R&D teams and play a key part in continuing our strong tradition of producing the highest quality color cosmetics. This position will demand a strong eye for color matching and an attention to detail as well as the ability to troubleshoot and resolve issues as they arise. Requirements • Approve/Reject Production Speed Check and print design, • Check production schedule daily to determine which SKU’S are being produced, • Collaborate with Production Manager about daily scheduling of speed checks, • Collaborate and confirm with Color Lab regarding prepared batches for daily production, • Check inventory of raw materials needed for newly approved shade formulas scheduled for production, • Check and update live shade tracker to keep track of existing shade development projects, • Collaborate with Product Development and Marketing on Holiday, Monthly, and Seasonal promotions, • Generate/retrieve production retains and maintain all documentation accordingly, • Follow all Standard Operating Procedures and guidelines, • Familiarize and become proficient in using Batch Metrics system, • Assist in the formulation, testing, and evaluation of 100% nail polish strips and other cosmetic innovations (e.g., gels, coatings, adhesives)., • Conduct raw material screening, prototype preparation, and stability testing, • Document all formulation trials, test results, and updates following Good Laboratory Practice (GLP) standards, • Stay updated on cosmetic formulation trends, materials, and international regulations relevant to nail and beauty product development. Requirements: • BS in Chemistry/related field or Coatings experience (preferred), • Must be able to see and evaluate color effectively, • Proficient with Microsoft Office Suite, • Strong attention to detail, • Bilingual (Spanish) preferred

Job Description Kalon Executive Search is partnering with an innovative global ingredient manufacturer to identify an experienced Business Development Manager to drive strategic growth across the U.S. nutraceutical market. This is a true hunter role focused on identifying, developing, and closing new business opportunities with dietary supplement, functional food, and beverage manufacturers. The ideal candidate is a highly motivated sales professional with a proven track record of opening new accounts, building long-term customer relationships, and consistently exceeding sales targets. * This is a remote position in the US with extensive travel Key Responsibilities • Identify, prospect, and secure new business opportunities with dietary supplement, functional food, and beverage brands as well as contract manufacturers throughout the United States., • Build and manage a robust pipeline of qualified opportunities while achieving new business revenue goals., • Initiate relationships with key decision-makers including R&D, product development, procurement, sourcing, innovation, and executive leadership teams., • Present differentiated ingredient solutions and communicate their scientific, technical, and commercial value to prospective customers., • Represent the company at major industry trade shows, conferences, and networking events to generate new business opportunities., • Transition qualified accounts to technical sales and account management teams once opportunities advance into the implementation phase., • Maintain accurate sales activity, pipeline forecasting, and customer information within the company's CRM system., • Partner closely with marketing to support account-based outreach campaigns, lead nurturing, and follow-up initiatives., • Provide regular updates on pipeline health, sales forecasts, market intelligence, and business development activities to senior leadership. Qualifications • Minimum of 3 years of B2B sales experience selling branded, clinically studied, nutraceutical ingredients., • Demonstrated success generating new business and acquiring new customer accounts through proactive prospecting and relationship development., • Experience selling branded ingredients, specialty ingredients, or raw materials into supplement, food, beverage, or contract manufacturing organizations is highly preferred., • Ability to build credibility with both commercial decision-makers and technical stakeholders, including R&D and product development teams., • Strong consultative selling, presentation, negotiation, and relationship-building skills., • Highly self-motivated with the ability to work independently while managing multiple sales opportunities simultaneously., • Experience utilizing CRM platforms to manage sales activity, forecasting, and pipeline reporting., • Bachelor's degree required; degrees in Nutrition, Food Science, Biology, Chemistry, or other life science disciplines are a plus., • Willingness to travel extensively throughout the United States to support customer meetings, industry events, and trade shows., • Existing network within the dietary supplement, nutraceutical, functional food, or ingredient manufacturing industries., • Experience selling clinically supported or science-backed ingredient solutions., • Proven history of consistently achieving or exceeding sales quotas in a business development-focused role. Compensation: $110,000 - $130,000 Base Salary + Uncapped Commission and Benefits If this sounds like the position you have been waiting for, please apply using the online application or the link below - all inquiries are strictly confidential. Our focus is to assist you to make your best next career move, and we will not use your information for any other purpose. Kalon Executive Search is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. www.KalonSearch.com

Job Description The Design Specialist supports New Product Development by creating, maintaining, and improving CAD drawings for new and existing products. This role partners closely with R&D, New Product Development (NPD), Dealer Support, Sourcing, and Quality teams to ensure drawings are accurate, buildable, and dealer-ready while meeting Fabuwood standards, specifications, and product offerings. Schedule: Monday - Thursday 8:00am-5:00pm and Friday 8:00am-1:00pm Roles and Responsibilities 1. Create CAD Drawings for New Products • Develop accurate CAD drawings for new product introductions, including cabinetry, vanities, accessories, and components., • Collaborate with R&D and NPD to ensure drawings align with product intent and specifications. 1. Revise and Maintain Existing CADs • Update existing CAD drawings to correct errors, incorporate enhancements, and reflect approved design or specification changes. 1. Cross-Functional Collaboration • Work closely with R&D, NPD, Sourcing, and Quality teams to ensure CADs align with product intent, manufacturing feasibility, and specifications., • Incorporate cross-functional feedback as needed. 1. Dealer Support & Custom Drawings • Support Dealer Support by creating or modifying drawings for dealer requests, layouts, and special applications. 1. Product Expertise Development • Build and maintain strong knowledge of Fabuwood’s product offerings, specifications, construction standards, finishes, and colors. Requirements & Qualifications • Proficiency in CAD software (AutoCAD or similar drafting tools)., • 2+ years of experience creating and maintaining technical drawings, preferably in cabinetry, millwork, furniture, or manufacturing environments., • Strong understanding of drafting standards, dimensions, tolerances, and technical documentation., • High attention to detail with the ability to produce accurate, consistent drawings., • Ability to interpret product specifications, design intent, and manufacturing requirements., • Experience collaborating with cross-functional teams such as R&D, Product Development, Sourcing, or Quality., • Ability to manage multiple projects and prioritize tasks in a deadline-driven environment., • Strong communication skills, with the ability to incorporate feedback from internal teams and dealer partners. Fabuwood Description Fabuwood is the leading kitchen cabinet manufacturer in the United States. We believe that your kitchen cabinets should help develop a sanctuary that offers a perfect balance of functionality and ambiance. With a range of styles, materials and finishes available, Fabuwood Corp. offers a multitude of options catering to your specific taste and needs. We make building a luxury kitchen affordable, without compromising on comfort, quality and efficiency. Benefits • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Vision insurance

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated executive to define the global supply chain strategy for commercial fusion power. As Vice President - Supply Chain, you will serve as a strategic partner to the Company’s leadership, finance & operations, and technical teams to architect the procurement and logistics infrastructure necessary to scale from prototype to power plant. This role will have a high degree of autonomy, and the ideal candidate must be able to move quickly to secure and manage critical path components in a competitive global market. Key Responsibility Areas: • Strategic Leadership: Develop and execute the long-term global supply chain and procurement strategy to support Thea Energy’s rapid growth and commercialization roadmap, • Organizational Development: Plan the hiring strategy and build a world-class supply chain organization, inclusive of sourcing, subcontracts management, supplier management, inventory/warehouse and logistics, • Global Sourcing & Partnerships: Lead supplier and partner negotiations and establish strategic partnerships with suppliers of critical materials (e.g. superconductors, vacuum vessels, power electronics), • Process Architecture: Manage and develop company policies, programs, and procedures for inventory control, logistics, and vendor management, evolving these processes as the company grows, • Cross-Functional Collaboration: Work with the Company’s leadership to support employee growth & development and ensure supply chain needs are integrated into engineering and financial planning, • Culture Building: Employ strategies to build, maintain, and grow the Company’s workplace culture within the operations team, fostering diversity and inclusionIdeal Experience & Skillsets:, • Executive Experience: 15+ years of relevant work experience, with significant time spent in senior leadership positions managing and growing supply chain organizations, • Scaling Expertise: Proven ability to support businesses through growth periods, specifically transitioning from R&D to full-scale manufacturing, • Strategic Acumen: Proven organizational skills with the ability to manage multiple projects and priorities while maintaining the "big picture" strategic vision, • Negotiation & Communication: Excellent negotiation, communication, and collaboration skills, capable of interacting effectively with board members, technical leads, and external partners, • Startup Agility: Ability to thrive in a fast-paced, dynamic startup environment where speed and execution are critical, • Cross-Functional Leadership: Ability to work across cross-functional teams to support complex hardware challenges and recruitment needsCompany Benefits:, • Salary range: $160,000-$250,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description NS Pharma is a highly focused, research-driven biopharmaceutical company working in rare diseases. We're exploring the potential of cutting-edge science as a subsidiary of Nippon Shinyaku Co., Ltd. Japan. Job Summary: Responsible for the management and execution of various aspects of translational and early-stage clinical studies (implementation, site selection, patient recruitment, vendor selection and oversight, tracking clinical data, etc.) for global clinical studies with adherence to all relevant regulations including FDA, ICH and Regulatory requirements. This is a hybrid position that requires to be in the Paramus office twice a week. Essential Duties and Responsibilities: • Develop and deliver program level translational and early-stage clinical drug development strategy, • Design, plan and execute biomarker strategies to inform indication priorities, commercial differentiation, regulatory strategies, biomarker qualification plan, and that achieve biomarker-driven milestones, such as target engagement, measurement assay development and validation, pharmacodynamic activity, and other biomarker contexts of use in clinical-stage programs, • Integrate with colleagues in discovery research and research-stage project teams to identify translational biomarkers and demonstrate preclinical target engagement, methodology of detection and measurement, proof-of-mechanism, pharmacodynamic activity, PK/PD relationships., • Plan, implement, manage and report for regional or global clinical studies., • Manage and Lead selection process of CROs for regional or global clinical studies., • Direct, oversight and manage the performance of study vendors (e.g. CROs and central labs)., • Provide direction and guidance with the Clinical Lead to achieve project objectives., • Manage and resolve project performance issues (issue management) if they arise., • Manage activities for clinical site selection, investigator meetings and study initiation., • Oversight of patient recruitment and development of recruitment strategies and plans., • Responsible for the creation of study related documentation (protocol, ICF, CRF, operations manuals etc.)., • Tracking clinical data, regulatory documents, and patient enrollment information and data resolutions to assure the timely completion of clinical studies in line with approved clinical development plans., • Assure compliance of investigational sites with SOPs, FDA regulations and ICH guidelines to assure that the studies are carried out fulfilling the requirements of the study protocols., • Manage negotiation of clinical trial contracts between investigational sites and CROs., • Oversight of data management vendors and statistical analysis vendors to ensure timely analysis output delivery in accordance with Statistical Analysis Plan., • Responsible for coordination with clinical suppliers to ensure appropriate and timely delivery of clinical trial supplies to clinical sites., • Implement project specific training program and training materials, • Create and maintain clinical SOPs and TMF as part of global QMS and TMF processes., • As needed and required perform other tasks and functions. Supervisory Responsibility: • Provide advice, professional development, and conduct performance management with cross-functional groups if applicable. Qualifications: • Must be able to work effectively in a multi-cultural, global team environment as responsibilities include intensive drug development collaboration with global project teams, NS Pharma Japan (HQ), external partners and vendors., • Experience in negotiating Master Service Agreements, Project Specific Contracts and Budgets., • Good cross-functional team leader who fosters team spirit and team motivation (teamwork), • Thorough understanding of clinical operations involved as related to the planning, launching, and closing clinical studies., • Ability to anticipate and timely escalate issues and to define appropriate action plans, • Decision-making and problem-solving skills, • Ability to handle multiple tasks and prioritize, • Strong organizational, communication and presentation skills, • Team player, flexible, ability to adapt to change Education and/or Experience: • PhD and/or MD with 8+ years of experience in pharmaceutical or biotech R&D. MS or BS with 12+ years of R&D experience with progressive levels of team leadership also considered., • Preference for those with 5+ years’ experience as a Translational lead for clinical programs. Experience with Ph2/3 or registrational programs desired., • Excellent understanding of drug development, regulatory processes and clinical development, • Must have oncology and rare disease experience, • Strong leadership abilities and proven abilities to lead a team within a matrix organization as well as able to work independently and be proactive. Compensation And Benefits: NS Pharma employees embrace our Mission to Help People Lead Healthier Happier Lives. We pride ourselves in offering employees and their families a robust Compensation and Benefits package designed to meet their needs, on and off the job. The annualized target salary range for this role is $175,000 to $220, 000; actual salaries will vary and may be above or below this range depending on several factors, including experience, education, training, location, and merit. Other benefits include: • Medical, Dental & Vision Insurance, Basic and Voluntary Life and AD&D Insurance, Short- and Long-Term Disability Insurance, Flexible Spending Account, Health Savings Account, and Employee Assistance Programs, • Discretionary Bonus Programs and Long-term Incentive Plan, • Retirement Savings 401k with company match, • Generous Paid Time Off, Sick Time & Paid Holidays, • Career Development, Progression and Training, • Flexible Work Arrangement Programs, • Paid Parental Leave, • Year-End Paid Holiday Shutdown Applications will be accepted until October 1, 2026 or until a candidate is hired. Applicants not hired will remain in our Talent community for future opportunity consideration. Thank you for your interest in NS Pharma. NS Pharma is an EEO employer.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated Buyer/Planner to manage day-to-day material requirements and procurement for our commercial fusion systems. You will oversee the material lifecycle, working with engineering to develop bills of materials, source and negotiate with appropriate suppliers, and manage orders through delivery into inventory. This role demands an organized, quick-moving professional who can keep materials on schedule within the rapid timelines and evolving priorities of a hardware startup. Key Responsibility Areas: • Own the purchasing lifecycle from requisition through delivery for specialized manufacturing components, commodity hardware, software and supplies., • Analyze engineering drawings and Bills of Materials (BOM) to plan material requirements, working with engineering and prototyping teams to adjust as designs iterate., • Source and qualify suppliers for new parts, running a competitive process negotiating price, lead time, and delivery terms., • Maintain the procurement and supplier database ensuring high accuracy for all part prices, lead times, supplier information, and purchase order documentation., • Expedite supply priorities and track supplier performance against on-time delivery, quality, and cost targets, • Coordinate logistics including freight, customs documentation, and handling requirements for hazardous and cryogenic materials., • Manage day-to-day inventory levels to prevent shortages while minimizing excess stock holding costs.Ideal Experience & Skillsets, • 5+ years of experience in buying, planning, or material control within a high-tech or aerospace environment., • Proficiency with ERP/MRP tools (e.g., SAP, Oracle, NetSuite) for purchasing, receiving and inventory management., • Strong analytical skills using Excel and data models to forecast material demand under shifting timelines., • Exceptional communication skills to act as a bridge between engineers and suppliers., • Proven organizational skills with the ability to manage a high volume of concurrent purchase orders in a startup or rapid R&D prototype environment., • Ability to occasionally lift objects up to 50 lbs.Company Benefits, • Comprehensive health benefits (e.g., medical/dental/vision), • Employee equity stock options, • 20 days PTO We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description This exciting opportunity will allow you to utilize your corporate law related experience in a dynamic and growing business environment. Reporting to the Senior Vice President and General Counsel, the ideal candidate will handle a variety of corporate law related matters, including contracts, product warranties, product literature, and litigation matters. Experience in drafting and negotiating complex agreements including supply, packaging, equipment, private label, manufacturing, lease, real estate, service, license, information technology, warranty, and confidentiality agreements is required. Establishing and maintaining valuable professional working relationships with all departments, such as Procurement, Sales, Operations, R&D, Technical, Finance, and Human Resources is critical. In addition, the Corporate Counsel - USA must be: • Highly motivated, goal oriented, and willing to work in fast-paced environment., • Able to develop an understanding of Sika’s products, technologies, and business strategies., • Able to regularly travel to Sika’s businesses in the United States to provide legal support and training to Sika employees.Qualifications, • Licensed to practice law in the State of New Jersey., • 2-5 years experience in Corporate, Commercial, and Product Liability Law is preferred., • Basic Understanding of Corporate Finance/Accounting is preferred., • High Energy Level., • Strong Work Ethic., • Excellent Verbal and Written Communication Skills. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionDescription: JOB OVERVIEW Truvant is a trusted partner to leading companies in healthcare, beauty, toys and many other industries. We provide clients with packaging services as well as comprehensive supply chain solutions. The Buyer will act as the single point of contact for packaging sourcing needs in the US. The role requires someone that is comfortable working across functional boundaries to influence and secure material requirements for existing and new business in a way that consistently adds value to the business. The position manages packaging materials coordination for new business developments, supplier relationship management and industry analysis with a high level of collaboration with global Procurement colleagues. RESPONSIBILITIES: Essential Functions: · Develop and execute strategic procurement initiatives aligned with business objectives, global procurement strategies, and organizational growth priorities. · Assess industry and market trends to identify emerging opportunities, supplier capabilities, cost drivers, supply risks, and innovations that can create competitive advantage. · Build, develop, and maintain strategic supplier relationships, including performance management, ongoing communication, feedback, and continuous improvement initiatives. · Lead end-to-end sourcing, bidding, and negotiation processes in an ethical, transparent, and commercially responsible manner, ensuring alignment with business requirements and appropriate leadership approvals. · Develop sourcing strategies that reduce costs, mitigate supply chain and commercial risks, expand the innovation pipeline, and contribute to top-line growth and customer value. · Establish Procurement as a trusted strategic business partner by engaging early in business planning, product development, customer opportunities, and key organizational decisions. · Develop and maintain strong cross-functional relationships with Procurement, New Product Development, R&D, Planning, Operations, Finance, Sales, and other key stakeholders. · Represent Procurement in meetings, business reviews, customer engagements, and new business opportunities, providing strategic sourcing and commercial expertise. · Lead Procurement activities supporting new projects and programs, including coordinating cross-functional inputs and developing commercially competitive proposals. · Maintain accurate databases, project documentation, sourcing records, supplier information, and other related documentation to support effective decision-making and compliance. · Facilitate communication and alignment among key stakeholders throughout the launch and startup of new projects, programs, and customer initiatives. · Lead the negotiation, execution, and ongoing management of complex, high-value, and highly visible supplier contracts, ensuring appropriate commercial, legal, operational, and risk considerations are addressed. · Establish and monitor performance metrics, supplier KPIs, and business objectives to measure effectiveness, identify opportunities, and drive continuous improvement. · Drive organizational compliance with policies, procedures, sourcing strategies, approval requirements, and global governance standards. · Promote ethical sourcing and responsible procurement practices throughout the supplier lifecycle, including transparency, appropriate documentation, risk management, and adherence to applicable company standards. Nonessential Functions/Demands: • Participate in industry conferences, supplier events, trade shows, and professional networking opportunities to maintain awareness of market developments and emerging technologies., • Support benchmarking initiatives and research best practices in procurement, sourcing, supplier management, and supply chain strategy., • Assist with special projects and strategic initiatives assigned by Procurement or executive leadership., • Participate in internal committees, cross-functional working groups, and continuous improvement initiatives as requested., • Support the development of Procurement presentations, reports, dashboards, and executive-level business reviews., • Assist with the evaluation and implementation of Procurement technology, systems, analytics, and process improvements., • Represent the organization at external supplier meetings and professional events when appropriate., • Perform other related duties and responsibilities as assigned.Requirements: QUALIFICATION REQUIREMENTS: -Bachelor's degree in Supply Chain Management, Procurement, Business Administration, Finance, Operations Management, Engineering, or a related field required. -Master's degree in Business Administration, Supply Chain Management, or a related discipline preferred. -Professional procurement or supply chain certification such as CPSM, C.P.M., CSCP, or equivalent is preferred. -5+ years of experience in CPG/FMCG, Food & Beverage, and/or Beauty industry. -5+ years of progressive experience in procurement, strategic sourcing, supply chain, purchasing, or a related function. -Demonstrated experience leading strategic sourcing initiatives, supplier negotiations, contract management, and cost-reduction programs. REPORTING RELATIONSHIP: -Manager: Procurement Manager PHYSICAL DEMANDS: -Must be able to remain in the stationary position 70% of the time. -The person in this position may need to move about inside the office to access office machinery, file cabinets, etc. Work Environment & Travel Requirements -Position requires regular travel between Truvant Health and Beauty main facility and warehouse facility to support quality, compliance, and operational activities. -Domestic Travel up to 25% -Must possess a valid driver's license and maintain reliable transportation.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description The primary function of a Technician is to provide necessary technical support to the development and maintenance of advanced chemical formulations for self-level underlayment (SLU) in new construction, preservation, repair, or renovation of structures. The incumbent provides support to scientists and managers through the performance of industry-related technical and organizational activities. • Perform test methods and procedures with little to no supervision., • Prepare formulations, run lab and process development experiments in a batch mixer in development labs., • Perform basic chemical, physical, and performance tests in various technology areas., • Test new and existing product formulas according to standard test protocols, such as ASTM and other industry standards. Perform all the mechanical testing to support product development., • Must be able to lift bags and buckets of materials as a part of routine lab work., • Perform technology demonstrations and/or field evaluations with limited guidance., • Document experiments and results in Laboratory notebooks with full traceability., • Immediately reports unsafe acts or conditions to his/her supervisor and takes immediate interim steps to protect himself/herself and others from serious risk. Qualifications, • High School Diploma or Associate/Bachelor’s degree in chemistry or a related science field is preferred., • Must have knowledge of common laboratory concepts, practices, and procedures, • Minimum 3 years of experience with materials testing and coatings in a lab environment., • Experience related to cementitious products is a plus., • Willing to learn from scientists and senior teammates on lab work and product evaluation. Also, work with team members supporting development projects and other tasks as assigned., • Must be able to follow standard test protocols, such as ASTM and other industry standards., • Highly safety-oriented., • Willing and able to help maintain labs, chemicals, and storage areas in good order., • Able to lift bags and pails of materials as a part of routine lab work., • Able to travel to plants in the U.S. for trials and troubleshooting when requested. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Sales Manager – Nutraceutical Specialty Ingredients The East Coast Sales Manager will drive sales of branded, clinically-studied ingredients to dietary supplement and nutraceutical brands across the Eastern United States. This role builds relationships with brand owners, R&D teams, and formulators to grow adoption of the ingredient portfolio into new and existing product lines. Ideal candidates bring technical fluency in clinical studies and formulation benefits, consultative B2B sales experience, and an established network within the dietary supplement and VMS industry. Key Responsibilities: • Represent a diverse portfolio of ingredients and technologies tailored to market demand, • Manage and grow existing business across the Eastern United States, leveraging established relationships with dietary supplement and VMS companies, • Drive ingredient sales using a value-based, consultative selling approach, • Identify and support customer projects that lead to long-term partnerships and revenue growth, • Collaborate on new product development, customer formulation challenges, and market expansion initiatives, • Regularly engage with R&D, procurement, marketing, and product development teams within client organizations, • Monitor regional market dynamics, including regulatory changes, competitor activity, and unmet customer needs Required Skills, Experience, and Qualifications: • Bachelor's degree in Nutrition, Food Science, Chemistry, or a related field, • Minimum 2-3 years of sales experience in dietary supplement ingredients, CMO/CDMO services, or specialty foods, • Established client relationships within the dietary supplement and/or VMS industry, whether through branded ingredient sales or CMO/CDMO business development, • Proven ability to manage key accounts and lead technical discussions with customers, • Experience introducing new products and executing innovation strategies in a competitive environment, • Goal-oriented, with strong problem-solving skills and an initiative-driven mindset, • Comfortable working independently in a dynamic, fast-paced setting, • Strong proficiency in Microsoft Office (Excel, Word, PowerPoint) and CRM/sales automation tools, • Solid understanding of marketing and customer insights, including product performance, application needs, and market trends, • Ability to explain technical features and benefits to a wide range of stakeholders, • Knowledge of pricing strategy and commercial negotiation, • Willingness to travel 50%, including trade shows and overnight trips, to support and grow customer accounts Compensation: $120,000 - $135,000 base, plus bonus, full benefits, 401 (k) match, etc. If this sounds like the position you have been waiting for, please apply using the online application or the link below - all inquiries are strictly confidential. Our focus is to assist you to make your best next career move, and we will not use your information for any other purpose. Kalon Executive Search is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. WWW.KALONSEARCH.COM

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview We are seeking an experienced and quality-driven Senior Machinist to program, operate, set up, and maintain our machine shop operations as we pioneer next-generation fusion energy technology. In this hands-on role, you will bridge the gap between rapid R&D prototyping and small-run production, operating both manual equipment and 3-axis CNC machines to fabricate high-precision components. You will be responsible for end-to-end machining execution—from reading complex technical drawings and programming toolpaths using High-Efficiency Machining techniques to performing setup, quality inspection, and routine CNC equipment troubleshooting. Working directly alongside engineering and production teams in a fast-paced environment, you will optimize workflows and contribute directly to building zero-emission stellarator architectures. Key Responsibility Areas: • Operate and maintain the machine shop including CNC machines, manual machines, and basic metrology equipment to produce high-quality precision components according to engineering specifications., • Set up CNC machines, including tooling, fixtures, and programming, to ensure efficient and accurate production runs., • Set up workflows and tooling to enable switching from production to one-of-a-kind parts., • Read and interpret blueprints, schematics, and technical drawings to understand machining requirements including GD&T., • Perform routine maintenance and troubleshooting of CNC equipment to ensure optimal performance and minimize downtime. Work with outside vendors when necessary., • Conduct quality inspections using precision measurement tools to verify part dimensions and tolerances., • Adhere to safety procedures and regulations to maintain a safe working environment for yourself and others., • Collaborate with engineering and production teams to optimize manufacturing processes and improve productivity. Required Experience & Skillsets: • 8+ years of experience operating 3-axis CNC machines in a manufacturing environment., • Experience in a prototyping setting, • Knowledge of HEM machining and tooling techniques, • Hands-on experience with manual machines such as Lathes and Mills., • Proficiency in CNC machine setup, programming, and operation, with a strong understanding of machining principles., • Ability to read and interpret blueprints, technical drawings, and geometric dimensions and tolerances (GD&T)., • Experience with precision measurement tools such as calipers, micrometers, and height gauges., • Strong problem-solving skills and attention to detail to identify and resolve machining issues., • Excellent communication skills to collaborate effectively with team members and convey technical information., • Demonstrated ability to work independently and prioritize tasks in a fast-paced production environment., • Commitment to safety protocols and practices to ensure a safe working environment. Desired Qualifications: • Certification or formal training in machining or related fields., • Experience with Fusion 360 CAD/CAM software for CNC programming., • Familiarity with a variety of machining materials, including steel, copper, nickel alloys, plastics, and composites., • Knowledge of additional machining processes such as milling, turning, drilling, and grinding., • Willingness to cross-train and learn new technologies and machining techniques. Company BenefitsCompany Benefits: • Base Pay: $32.00 – $52.00+ per hour (Non-Exempt / OT Eligible), • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Position Summary: The Associate Designer, Denim will oversee the design process from conception to final prototype for denim across all TCP/GYM divs and ages and is fully responsible for entire product design including market research, designing, sketching, wash development, specing, and fit. The Designer will build effective collaborative relationships and maintain the unique look, integrity, and vision of the TCP brand. Key Accountabilities: • Research competitive markets to identify new trends, fabrics, and techniques, • Ensure that the product is consistent with market trends while maintaining the brand identity and business strategy, • Concept and execute silhouette, wash, fit, and styling directions, • Sketch and color-assigned categories in Illustrator, • Ensure that production/sampling packages are accurate and complete, • Partner with the Merchandising Team to set a seasonal framework and ensure creative ideas and business goals are aligned, • Set seasonal fabric, wash, and trim direction, working with Product Development, Production, and R&D Teams regarding QA results and development issues., • Set direction of fit and final approval of fit by collaborating with Technical Design, • Maintain daily communication with Merchandising, Product Development, Production, and Technical Design Teams regarding development issues, • Adhere to cross-functional calendar and attend all meetings as required, • Provide a positive, challenging work environment, • Able to travel Globally to oversee sample making /wash process as needed Education and Experience: • Bachelor’s degree in design or related field, • 3+ years of experience in denim design and wash development- Boys and Kids experience a plus, • Knowledge of denim fabrications, construction, denim processing, and wash Skills and Behaviors: • Ability to design around concepts for DENIM, • Thorough knowledge of fabrications, silhouettes, colorways, construction techniques, and trim, • Highly organized with effective communication skills, • Must be able to work towards and manage deadlines while shifting priorities, • Proficient in Adobe Suite: Illustrator, Photoshop, In Design, Details: • Full-time role located in Secaucus, New Jersey, • Hybrid work model includes in-office days on Monday, Tuesday, and Thursday, • Health, Vision & Dental Insurance for full-time employees, • 401K with employer match program, • Generous employee discount

We are an equal opportunity employer with a commitment to diversity. We’re committed to hiring and retaining talent, which is why we invest in our employees through competitive pay, a generous bonus structure, great healthcare, a comprehensive wellness program, and many other benefits. At Nextech,