Skilled trade jobs in Elizabeth, New JerseyCreate job alerts

Job Description NJ Licensed Journeymen Electricians needed for an industrial project near Newark, New Jersey area. Who have strong hands-on experience in power systems and commissioning work. This role involves installing SPCS, landing 4/0 AWG grounding, and terminating 2/0 AWG by six power feeders at QF1, as well as landing a 480-volt auxiliary feeder. Electricians will be responsible for performing system power-up sequences, including starting a 300 kVA generator, closing breakers QF1, QF3, QF5, and QF6, energizing the UPS, and then closing QF7, QF8, and QF9. Candidates must also verify cell voltage using a laptop on the SW2 switch, identify and flag containers reading below 3.2448 nV, and recharge low state-of-charge containers using a 300 kVA, 480-volt three-phase generator until the SOC increases by 25 percent, which typically takes about four hours per container. You must have basic tools of the trade. You may be required to pass a pre-employment drug test and pass background check upon arrival. Paying up to $50/hr Per Diem: $95/ a day for days worked Duration: 2 weeks Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) Company DescriptionWe believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development Please do not call our office regarding this position. DAIKIN HVAC Repair Specialists We are a results-oriented company providing servicing, maintenance, and installation of HVAC systems since 2005. We have an extensive knowledge base with experience in servicing multiple brands and lines of equipment, including boilers, pumps, motors, frequency drives, water towers, and more. Our team is committed to giving you peace of mind by ensuring your investment stays up and running so you can enjoy peace of mind day after day. Lightning Mechanical provides factory-trained service, installation, and maintenance for Daikin VRV and Applied systems, as well as many other VRF manufacturers. Our cross-trained service and installation technicians using factory tools service the New York City metro area, which sets us apart from our competition. Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced Commercial HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. VRV/VRF a PLUS! You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Extensive work with commercial HVAC systems, including chillers, rooftop units, and mechanical systems, • Troubleshoot, calibrate and adjust pilots, thermostats and burners, transformers, controls, relays, heaters, elements, switches and controls on electrical systems, • Use common tools of the HVAC trade in daily work (e.g. multimeter, refrigerant gauges, charging charts, hand tools etc.), • Ability to install, service, and repair water source heat pump systems, • Establish customer rapport to ensure the highest levels of satisfaction, • Ability to layout, fabricate, assemble, install, and maintain refrigerant piping systems, pipe supports, and fixtures in commercial and industrial settings, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • 5-10 years experience as an HVAC service technician, • Valid Drivers License and clean driving record, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 50 pounds

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job Description Position is Located in MINOT, North Dakota This is an on-site role based in Minot, North Dakota. Candidates must either currently reside in or be willing to relocate to the area. We’re looking for a skilled HVAC Technician who knows the trade and can handle service work without handholding. If you don’t have at least 2 years of real HVAC experience, do not apply. This is not a training position. Requirements: • Minimum 2 years of hands-on service experience in heating, cooling, and ventilation (residential or commercial)., • EPA Certification required., • Mechanical, gas piping, or other trade certifications are strongly encouraged., • Clean driving record – you’ll be driving a company vehicle., • No criminal record - you'll be in customer's homes and places of business., • Must be able to lift, push, and pull heavy items, 100+ lbs when needed., • Work includes tight spaces, roofs, ladders, and crawl areas – if you’re afraid of heights, confined spaces, or getting dirty, this isn’t the job for you., • Must know your way around hand tools, meters, gauges, and diagnostic equipment., • Show up on time, work hard, and treat customers and coworkers with respect., • Reside in or relocate to Minot, ND. We Offer: • Seriously Competitive pay based on experience, • Steady, year-round work, daily overtime available, • A solid team that values skill and reliability If you’re an experienced HVAC tech with your EPA certification and the drive to get work done right, we want to hear from you. Apply only if you meet the experience requirements. #hc207099

Job title: Electrician \n\n Location: 1249 Newark Turnpike, Kearny, NJ 07032 \n\n Pay: $43.88ph \n\n Shift: 5:45 pm to 6:00 am - 36/48 schedule. During training, they need to be available from 5:45 am to 6:00 pm (2 to 3 months) \n\n Contract: Direct Hire \n\n \n\n The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and “common sense” safety policies and procedures. \n\n \n\n This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. \n\n \n\n Principal Duties and Responsibilities: \n\n\n\t • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem.\n\t, • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety\n\t, • Install and repair complex industrial equipment \n\t, • Helps to Maintains all Plant electrical and electronic sys.\n\t\n\t\t, • Assist in the development of PM and Predictive maintenance program for all motors and panels\n\t\n\t\n\t, • Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken components.\n\t\n\t\t, • When appropriate or when plant decides lead efforts for electrical root cause analyzes\n\t\t, • Establish a program to monitor all critical motor in the plant.\n\t\n\t\n\t, • Tests malfunctioning machinery and discusses malfunction with other maintenance workers.\n\t\n\t\t, • Be lead person for electrical downtime and trouble shooting\n\t\n\t\n\t, • Replaces faulty electrical components of machine such as relays, switches, motors, and position sensing devices.\n\t, • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion.\n\t, • Helps with electrical training of other maintenance personnel.\n\t\n\t\t, • Help coordinate electrical training program and efforts for the plant.\n\t\n\t\n\t, • Complies with safety requirements and notifies management of noted exceptions.\n\t, • Follows all environmental compliance polices & programs.\n\t, • Works as instructed with outside contractors.\n\t\n\t\t, • Be a lead person for all electrical projects and installation that are maintenance responsibility.\n\t\t, • Be maintenance contact person on automation projects.\n\t\n\t\n\t, • Willing to attend annual training for new or improved electrical & PLC sys.\n\t, • Comply with all plant rules\n\t, • Comply with safety regulations and maintain a clean and orderly work area\n\t, • All other duties as assigned or needed\n\t, • Regular Attendance on site and ability to rotate to varying shifts\n\n\n \n\n \n\n \n\n SKILLS AND ABILITIES \n\n \n\n The employee should hold the following abilities: \n\n\n\t • Basic Computer Skills\n\t, • Electrical: industrial electrical code. (local compliance issues) \n\t, • PLC\n\t, • Hydraulic\n\t, • Pneumatics\n\t, • Blueprint & Schematic reading and P&ID drawings.\n\t, • Basic Welding\n\t, • Fusing, thermal overload protection, wire sizing, motor theory, etc.\n\t, • AC, DC and Servo drive system (basics)\n\t, • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc.\n\t, • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant)Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant)\n\t, • Able to think under pressure and make quick decisions\n\t, • Ability to work well in a team or alone\n\t, • Able to communicate in English\n\t, • Good attention to detail\n\n\n \n\n COMPUTER AND SOFTWARE COMPENTENCIES \n\n\n\t • Must be able to operate a computer or other keyboard instrument \n\n\n \n\n EDUCATION AND/OR EXPERIENCE \n\n The employee should have the following: \n\n\n\t • High School Diploma or GED Equivalent\n\t, • PLC Training\n\n\n \n\n Experience: \n\n\n\t • Preferably seven- (7) year’s experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. \n\t, • Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. M\n\t, • ust have the ability to interpret instructions furnished in written, oral, diagram or schedule form. \n\t, • Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. \n\n\n \n\n ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT \n\n The employee should possess the ability to: \n\n\n\t • Do repetitive hand, arm, leg movements for several hours\n\t, • Climb on and off of fork truck\n\t, • Stand for 10 - 12 hours straight\n\t, • Climb and descend stairs for up to 12 hours continuously\n\t, • Lift and push and pull 50lbs. More than 100 times per day\n\t, • Squat, bend at the waist and knees freely\n\t, • Expose to sounds or noise levels that maybe uncomfortable\n\t, • Handle, control or feel objects, tools or control--continously\n\t, • Repeat movements\n \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\tAs part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined.\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

Job DescriptionBenefits: • Dental insurance, • Vision insurance Job Title: Facility Technician Location: Linden, NJ Shift: 8:00 AM 4:30 PM Position Overview The Facility Technician is responsible for performing a range of interior facility maintenance tasks to ensure a safe, functional, and efficient working environment. This includes routine repairs, light electrical work (up to 240 volts), basic plumbing, and support for general upkeep across the facility. The ideal candidate is hands-on, proactive, and comfortable working independently while maintaining high safety standards. Key Responsibilities • Perform routine inspections and general maintenance tasks throughout the facility., • Troubleshoot and repair basic electrical components such as outlets, switches, and lighting fixtures (up to 240 volts)., • Replace and maintain overhead lighting, including high-bay warehouse lights., • Assist with minor plumbing tasks, including unclogging drains, replacing sink components, and general water line troubleshooting., • Use hand and power tools to repair or install doors, shelving, workstation components, and other facility-related items., • Support internal moves and setups, including furniture assembly and equipment relocation., • Maintain cleanliness and safety across maintenance work areas., • Respond to maintenance requests and urgent repair issues in a timely manner. Qualifications • 12 years of experience in facility maintenance, general trades, or building repairs., • Comfortable working with interior electrical wiring up to 240 volts., • Ability to use measuring tools and interpret basic technical instructions., • Skilled in identifying and safely using tools such as screwdrivers, pliers, wrenches, and cordless power tools., • Ability to lift up to 49 lbs and work at heights up to 20 feet using ladders or lifts., • Strong problem-solving skills and the ability to work independently., • High school diploma or equivalent preferred., • Trade school certification or equivalent hands-on experience is a plus.

Now Hiring: Experienced Service Plumber.Position is located in Minot, North Dakota - Relocation is Required*.We're looking for a skilled plumber who knows the trade and can get the job done right.If you don't have at least 3 years of real plumbing experience, do not apply.This is not a training po

About the Role: The Traveling Field Mechanic with MYR Group youll travel to project sites across the designated service area, supporting our field teams. You’ll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, youll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. Main shop will be located in Glen Allen, VA. A company vehicle and fuel card will be provided. When travel is required, meals and lodging will also be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group Inc. (MYR Group) is a publicly traded holding company of specialty electrical construction companies. MYR Group subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our rich history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most complex projects, including new construction, upgrades, maintenance and repair for transmission, distribution and substation facilities, commercial and industrial electrical construction, emergency and storm restoration, clean energy, pre-construction services, and engineer-procure-construct (EPC) methods of project delivery. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company’s Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience . Must be capable of operating company vehicles and equipment on a daily basis. Clean Motor Vehicle Record (MVR) and good DAC Report. Ability to obtain a valid Class B Commercial Driver License (CDL). Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical , Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental – 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting , and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Onsite

The purpose of the Maintenance Planner is to perform as professional, highly skilled and exceptionally competent maintenance person in addition to handling the certification, training and management of contractors and all planned maintenance. Preferably five (5) years in a related maintenance trade

Your Impact at Lowe's As a Sales Specialist, you will be one of the first people our customers meet. Your sales expertise can help customers find the products they need and encourage them to transform a great project idea into reality. If you enjoy helping people and solving problems in a fast-paced environment, this is the perfect role for you. How We Support You Whether you need a part-time position or a place to plant yourself and grow, Lowe's is ready to support your goals. As a Lowe's associate, you'll gain access to a variety of benefits beyond competitive pay and flexible schedules. Earn more from your sales performance with additional bonus opportunities. Make your well-being a priority with multiple health insurance options. Explore educational opportunities with Lowe's tuition assistance program. Take charge of your financial future with a company-matching 401(k). Gain extra savings with a 10% Associate Discount. Learn new trade skills with our Track to the Trades program. For information about our benefit programs and eligibility, please visit https://talent.lowes.com/us/en/benefits . Your Day at Lowe's Sales Specialists at Lowe's are very active, moving throughout the store or garden center, answering phones, and talking to customers. As a Sales Specialist, you'll spend most of your time communicating with customers - discussing project needs, answering questions, and helping them accomplish their home improvement goals. You will become the product expert, informing customers of specifications, features, promotions, and financing options to close a sale. Your exceptional consulting services help ensure that customer needs are met before leaving the store. You will be working in one of the following departments, based on hiring needs and skillsets: Appliances, Cabinets, Flooring, Live Nursery, Millwork, Fashion Plumbing, Outlet, Tool Rental, Pro, or Windows & Walls. Key Responsibilities Provide SMART customer service by seeking out customers to understand their needs, answer questions, and communicate the advantages of Lowe's products and services Serve as a point of contact for customers and vendors within your department, providing project estimates, scheduling installer visits, processing and tracking customer orders/installations, and following up to ensure project completion. If in the Pro Department, focus on external accounts and outside sales and services Monitor inventory levels to support sales, working with vendors and other stores to find merchandise and order replacement stock Perform price reviews by pricing policies and ensure maintenance of pricing and documentation Support all checkout functions, call buttons, departmental pages, or requests for assistance Train associates in the department by conducting on-the-job training on the Sales floor and coaching around development needs Complete other duties as assigned Minimum Qualifications High School Diploma or GED 1 year experience in customer-facing sales or 6 months of Lowe's retail experience (Or 3 years of external experience in customer-facing sales or 18 months of Lowe's retail experience if education requirement is not met) 1 year of experience in sales or customer service in a sales environment with required sales goals or metrics Able to Read, write, and perform basic arithmetic (addition and subtraction) Able to stand and sit for prolonged periods Minimally lift 25lbs unassisted or over 25lbs with or without an accommodation Obtain sales-related licensure or registration if required by law in your state (Lowe's will support and fund this requirement) Preferred Qualifications 1 year of experience in completing customer sales orders 1 Year Experience promoting product related services and plans such as installation, delivery, credit financing, or extended protection plan 2 years of experience designing customized products for customers using 20/20 or Computer-Aided Design System Professional certification related to the department being considered Bi-lingual skills Lowe's commitment to growth and teamwork extends to the community as well. To better equip our stores and serve our communities, we strongly encourage bilingual, military, and veteran talent to apply and join our team. Travel Requirements This role does not require regular travel; however, this role may need to travel occasionally to meetings, training, or to support neighboring stores. Working Conditions Environmental factors vary by location. You may be working in both inside and outside weather conditions. Exposure to varying climates, including extreme heat or cold, wet, damp, humid, windy, or drafty conditions, is possible. You may be exposed to constant or intermittent noises in addition to moving or shaking objects and equipment. Lifting methods vary based on role, weight, and volume. Associates must follow guidelines, limiting single lifts to 75 pounds. Team lifts are used minimally starting at 75 pounds or when needed. Powered equipment should be used as required, with proper training or assistance from a trained coworker. About Lowe's Lowe's Companies, Inc. (NYSE: LOW) is a FORTUNE 50 home improvement company serving approximately 16 million customer transactions a week in the United States. With total fiscal year 2023 sales of more than $86 billion, Lowe's operates over 1,700 home improvement stores and employs approximately 300,000 associates. Based in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing and helping to develop the next generation of skilled trade experts. For more information, visit Lowes.com Pay Range: $19.00 - $21.30 per hour Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. For information regarding our benefit programs and eligibility, please visit https://talent.lowes.com/us/en/benefits . Associate Benefits ( https://talent.lowes.com/us/en/joining-our-team ) Working at one of the largest retail companies has its perks. We offer exceptional benefits and wellness programs for eligible full-time and part-time associates, tailored for many different lifestyles. Our benefits range from health, vision and dental insurance to paid vacation, tuition assistance and parental and family-building benefits. Plus, we offer learning and development opportunities to help our associates grow their skills and achieve their goals. Health, Dental and Vision insurance Life and Disability insurance Paid time off based on role, tenure, and locality, including vacation, holidays, sick and volunteer time Flexible spending and health savings accounts 401(k) Retirement account with company match Employee Assistance Program with concierge, work/life services and no-cost counseling for all kinds of needs Education support programs, including tuition assistance and trade skills scholarships Business Travel Accident insurance Maternity and Parental leave Adoption assistance Lowe's Associate Discount and broad discount platform Other discretionary benefits (based on eligibility) include annual bonuses, enrollment in Lowe's Employee Stock Purchase Plan and/or deferred compensation plan, and grant awards About Lowe's Lowe's Companies, Inc. (NYSE: LOW) is a FORTUNE 100 home improvement company with total fiscal 2025 sales of more than $86 billion. Lowe's employs approximately 300,000 associates and operates over 1,750 home improvement stores, 540 branches and 120 distribution centers. Based in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing, improving community spaces, helping to develop the next generation of skilled trade experts and providing disaster relief to communities in need. For more information, visit Lowes.com . Lowe's is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Pay Range: $19.00 - $21.30 per hour Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. For information regarding our benefit programs and eligibility, please visit https://talent.lowes.com/us/en/benefits.

Job Description We are seeking experienced technicians to provide specialized commercial repair services in the following trades: Plumbing, Electrical, HVAC, and General Repair. This is ongoing 1099 contract work for skilled professionals who can independently diagnose and complete a wide range of commercial repairs and facility maintenance tasks. Responsibilities Plumbing Perform commercial plumbing repairs and address drainage issues Execute leak detection and repair services Manage fixture replacements including toilets, faucets, and valves Conduct water heater troubleshooting and repair Electrical Diagnose and troubleshoot commercial electrical problems Install and run new lines and circuits Replace breakers, outlets, and various lighting fixtures Resolve complex power and electrical system issues Handyman and General Repair Complete professional drywall repair and painting Perform minor carpentry and commercial door repairs Replace ceiling tiles and various building fixtures Execute general facility maintenance tasks and work orders HVAC Troubleshoot commercial RTUs and other specialized units Repair or replace motors, belts, and thermostats Perform scheduled preventative maintenance Diagnose heating and cooling system issues Qualifications Proven commercial experience within your specific trade specialization Demonstrated ability to work independently with minimal supervision Possession of professional tools and reliable transportation Proper licensing and certifications as required by law Strong diagnostic and troubleshooting skills for commercial systems Professional communication skills for client interactions Benefits Consistent supply of commercial work orders Long-term contractor opportunities and partnerships Flexibility of 1099 contract work Company DescriptionWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnershipsWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnerships

Job Description Account Manager (Full-Time) Location: Woodbridge, NJ (Mon-Thurs in office, Fridays remote) Salary: $70,000 - $100,000/year + performance bonuses + commissions Are you ready to join a dynamic, innovative, and professional team? At Anchora, we are a large-scale outsourcing company specializing in managed manpower from overseas, process development, and data analytics. Our goal is to provide results-driven solutions to our clients while fostering a positive, agile, and growth-oriented work environment. About the Role As an Account Manager, you’ll serve as a vital link between clients and our offshore teams. This is a fun, dynamic position where no two days are the same. Key Responsibilities: Build and maintain strong relationships with clients (mainly remote meetings). Implement client visions and review progress regularly. Act as a liaison between clients and offshore teams, ensuring clear communication. Interview and hire offshore staff; delegate and review their tasks. Offer constructive feedback to offshore teams and ensure high-quality output. Consult with clients and provide fresh ideas to them. Manage qualified prospects who are interested in services until signed contracts. Manage and prioritize multiple client accounts and prospects simultaneously. Represent Anchora at trade shows to generate leads and build relationships. Why Work with Anchora? We value our employees and offer outstanding benefits, including: Health & Wellness: Comprehensive health, dental and vision insurance. Personal trainer and gym membership reimbursement. Work-Life balance. Work from home every Friday. Generous PTO, including many holiday closures. Dependent Care Assistance (DCA) accounts for dependent care expenses. Perks & Culture: Monthly team lunches and Anchora-sponsored team outings. Fully stocked kitchenette with snacks, drinks, and refreshments. Modern, comfortable workspaces with double monitors, ergonomic chairs, and more. Professional Growth & travel reimbursement: Paid training and professional development opportunities. Performance-based bonuses for exceeding expectations. Travel reimbursement for business-related activities. Required Qualifications: Strong communication and interpersonal skills. See an idea from inception to completion. Highly organized, with the ability to juggle multiple accounts. Skilled at prioritization and resolving pressing issues with level-headedness. Ability to delegate effectively and lead remote teams. 2 to 4 years of experience in account management or a similar role preferred. Previous business development is preferred. Work Schedule Monday to Friday normal business hours Mon-Thurs in office. Fridays work from home How to Apply Interested candidates, please email your resume to careers@anchora.com . We look forward to hearing from you! Company DescriptionAt Anchora, we are a large-scale outsourcing company specializing in managed manpower from overseas, process development, and data analytics. Our goal is to provide results-driven solutions to our clients while fostering a positive, agile, and growth-oriented work environment.At Anchora, we are a large-scale outsourcing company specializing in managed manpower from overseas, process development, and data analytics. Our goal is to provide results-driven solutions to our clients while fostering a positive, agile, and growth-oriented work environment.

Job Description Daily responsibilities vary greatly for remodelers depending on the property where they’re working and the types of building and repair tasks which need to be performed. The core duties that remodelers perform, however, are universally the same whether they work for themselves or within a company dynamic. Assess Work Sites Remodelers assess work sites where remodeling work is desired, and determine what needs to be done to complete the requested remodel work. Perform Carpentry Work Remodelers perform various carpentry tasks that include installing cabinets, hanging doors, and framing rooms. Replace Plumbing Fixtures Remodelers replace plumbing fixtures such as sinks, toilets, and faucets. Hang Drywall Remodelers hang, repair, and replace drywall as needed for new and existing rooms. Install Flooring Remodelers install floors, including wood floors, carpeting, concrete, and other flooring types. Lay Tile Remodelers install new tilework on floors and walls, place new grout, and repair existing tile. Follow All Building Codes Remodelers take out all required permits and follow building codes as set forth by city, county, and state laws. Make Repairs Remodelers repair existing property elements when possible. Perform Finish Work Remodelers install and replace trim, molding, windows, and perform other finish work. Replace Light Fixtures Remodelers replace light fixtures and ceiling fans. Clean Job Sites Remodelers clean up job sites during and after remodeling work. Remodeler Skills and Qualifications Remodelers use physical ability and mechanical skills to replace and repair walls, floors, roofs, cabinets, counters, and fixtures of all types in order to build new rooms and refurbish existing rooms. Employers and individuals look for remodelers who have the skills needed to perform these tasks. • Mechanical skills – remodelers use a variety of tools and perform many different tasks that include carpentry, plumbing, and light electrical work., • Communication – remodelers work collaboratively with construction workers and other professionals, which requires excellent verbal communication skills., • Physical ability – remodelers use physical ability to work with their hands and perform many tasks that require squatting, standing, and bending for hours at a time., • Attention to detail – because different aspects of remodeling work depend upon each other to function properly and look good, remodelers pay close attention to ensure that all work is performed well and correctly., • Multi-tasking – as remodelers perform work on different projects and rooms while using a vast variety of remodeling skills, multi-tasking is an essential component of the job. Tools of the Trade Remodelers work regularly with the following tools: • Hand tools (hammers, screwdrivers, saws, demolition bars), • Power tools (drills, nail guns, saws)Company DescriptionWe've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects. As a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects.\r\n\r\nAs a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.

Job Description About us • Join our team of professionals and apply for our elite brand ambassador job in New Jersey and be part of something great!, • Starting pay $30.00/hour., • Female-owned and known for our professionalism and progressive approach, we specialize in consumer activation and beverage marketing throughout the United States., • Our commitment to redefining industry standards, coupled with a relentless pursuit of innovation and always being prepared to deliver an unparalleled experience that outrivals expectations sets us apart from other experiential marketing companies., • We continue to defy industry stereotypes and set new standards of excellence. Join us in reshaping perceptions and proving that greatness knows no bounds. Together, let's showcase our industry's true potential and emerge as leaders in innovation and quality. Join Our Growing Team as a Brand Ambassador Are you a passionate advocate for bourbon, beer, wine, or other alcoholic beverages, and skilled in promotions, marketing, or sales? We're on the lookout for dynamic individuals for beverage promotions roles. Our team members represent our brands as on-premise Brand Ambassadors and off-premise Sales Professionals. Positions offers competitive pay and a flexible schedule that works around your availability, Responsibilities • If you are hired for the elite brand ambassador job in New Jersey you will conduct engaging consumer tastings at diverse locations, including liquor or package stores, grocery stores, bars, restaurants, festivals, sporting events, convenience stores, gas stations, and trade shows., • Deliver captivating product presentations, showcasing brand attributes and product features to potential customers., • Distribute enticing product samples and promotional materials to drive brand awareness and cultivate customer loyalty., • Engage with consumers, providing expert guidance, addressing inquiries, and enriching their tasting experience., • Exemplify our dedication to quality and customer satisfaction by representing our brands with enthusiasm and professionalism. Requirements Ideal Candidates The ideal candidate for our brand ambassador job in New Jersey will: • Demonstrate a genuine passion for the beverages we’re representing., • Brings previous sales or promotional experience to the role., • Possesses outstanding communication and interpersonal skills., • Has a flexible schedule to allow working evenings and/or weekends., • Has reliable transportation and is timely and reliable. Additional Details • Tasting events typically span 2-3 hours, often with multiple events per day/evening., • Must be at least 21 years old. Ready to seize this thrilling opportunity and help elevate our brands? Apply now! Competitive compensation and growth opportunities await. Benefits • Comprehensive training provided for candidates without prior experience., • Flexible Schedule, • Competitive wages

Job Description Job Title: Plumber Mechanic Job Description This role directs the installation of plumbing systems, equipment, and fixtures on a variety of construction projects. You will plan, lay out, participate in, and supervise plumbing work both on job sites and in the shop, working with a high degree of independence on maintenance, repair, and construction assignments. You will coordinate with field leads, use construction management software to receive work orders, and ensure all installations and modifications comply with specifications and building codes. Responsibilities • Plan and lay out plumbing systems for construction, retrofit, addition, and remodeling projects using blueprints, rough plans, sketches, drawings, and existing components., • Direct, supervise, and participate in the installation of plumbing systems, equipment, and fixtures on job sites and in the shop., • Lead and coordinate helpers and junior mechanics to run storm and sanitary lines and ensure work progresses safely and efficiently., • Install and work with cast iron, PVC, and related plumbing materials using appropriate hand tools and trade techniques., • Set up, install, and maintain water and temporary water lines to support construction and renovation activities., • Analyze defects and malfunctions in plumbing equipment and systems to determine necessary repairs and corrective actions., • Lay out, mark, and prepare work areas for plumbing installations, ensuring accurate measurements and alignment., • Use construction software and written job requests to receive, prioritize, and document maintenance, repair, and construction assignments., • Perform maintenance and repair tasks on plumbing systems as requested through software, written job orders, and emergency calls., • Ensure all work complies with applicable specifications, building codes, and industry standards throughout construction and remodeling projects., • Collaborate with leads and other trades on site to coordinate work sequences and resolve technical or scheduling issues., • Respond to feedback from users and project stakeholders, making adjustments as needed during and after project completion., • Maintain tools, equipment, and work areas in a safe, organized condition and follow all safety procedures on job sites. Essential Skills • Thorough knowledge of the practices, methods, materials, tools, and equipment used in the plumbing trade., • Ability to analyze defects in plumbing equipment and systems and determine appropriate repairs., • Ability to read and interpret blueprints and to lay out work from prints, rough plans, sketches, drawings, and broken parts., • Proficiency in installing plumbing systems, including storm and sanitary lines, using cast iron, PVC, and related materials., • Skill in using hand tools and trade-specific equipment for plumbing installation and repair., • Ability to lay out and mark plumbing runs accurately for new installations and modifications., • Experience working with water and temporary water lines on construction projects., • Capability to work with considerable independence while following general direction and supervision from on-site leads., • Strong understanding of construction and building code requirements related to plumbing systems. Additional Skills & Qualifications • Cast iron plumbing experience is a significant plus., • Experience running crews or working with helpers and junior mechanics on construction projects., • Experience in plumbing work on retrofit, addition, pharmaceutical, and new construction projects., • Comfort working on low- to mid-rise projects, typically five stories or less., • Familiarity with construction management or work order software to receive and track assignments. Why Work Here? You will join a team that focuses on diverse plumbing construction projects across New Jersey, including retrofits, additions, pharmaceutical facilities, and new builds up to five stories. The organization offers the opportunity to work on technically interesting projects, grow your skills alongside experienced tradespeople, and take on increasing responsibility in leading field work. You can expect a steady pipeline of projects and a collaborative environment where field input is valued and craftsmanship matters. Work Environment You will work as part of a plumbing team on various construction sites throughout New Jersey, primarily on retrofit, addition, pharmaceutical, and new construction projects up to five stories. The role involves both field and shop work, using hand tools and standard plumbing equipment to install cast iron, PVC, and related materials. Work assignments for maintenance and repair come through construction software, written job requests, and emergency calls, and you will operate under general direction from on-site leads. The environment is typical of active construction sites, requiring adherence to safety procedures, appropriate work attire, and readiness to work in varying site conditions and stages of building completion. Job Type & Location This is a Contract to Hire position based out of Jersey City, NJ. Pay and Benefits The pay range for this position is $25.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jersey City,NJ. Application Deadline This position is anticipated to close on May 29, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: The Inspector is responsible for conducting airworthiness inspections and supporting quality assurance activities within Unilode’s repair station. The role ensures that all inspections, documentation, and repairs comply with regulatory standards, customer requirements, and safety protocols. The Inspector also contributes to workshop organisation, technical support, and regulatory audits, helping maintain highquality standards and on-time production. Key Responsibilities: Conduct Inspections and Approve Work Orders Customer Focus, Collaborate • Create and manage accurate and timely work orders in line with station processes., • Perform preliminary, hidden damage, in-progress, and final inspections of aircraft components., • Review and record results to ensure proper Return to Service (RTS) documentation. Ensure Compliance with Regulations and Technical Standards Courage, Collaborate • Verify compliance with FAA regulations, customer requirements, airworthiness directives, and service bulletins., • Apply OEM technical data and follow procedures outlined in the Repair Station Manual (RSM) and Quality Control Manual (QCM)., • Support the QA team and act on delegated quality-related duties from the Chief Inspector or QA Manager. Support Workshop Operations and Quality Assurance Collaborate, Customer Focus • Carry out routine and non-routine tasks independently to meet production schedules., • Assist the Chief Inspector in training and technical guidance of team members., • Operate material handling equipment, including forklifts (upon certification), and assist with vehicle loading/unloading. Audit Preparation and Customer Communication Courage, Customer Focus • Represent the repair station during audits or visits from customers and regulatory authorities., • Ensure compliance with electronic recordkeeping standards and maintain data security in FAA approved systems., • Provide support documentation and technical responses as required during inspections. Our Values in Action: • Be Humble and Curious – Continually learn and apply industry standards to maintain inspection excellence., • Inspire, Empower, and Prosper – Support operational readiness by sharing technical knowledge., • Take Ownership and Get Stuff Done – Perform inspections and ensure compliance with pride and accuracy., • Build a Better Future – Uphold quality and safety to enhance Unilode’s reliability and reputation., • Team Up to Be Better – Collaborate across the MRO team to maintain workflow efficiency., • Be Passionate About Our Customers – Ensure repair standards meet or exceed customer expectations., • Be Eager to Win – Deliver inspections on time while ensuring regulatory and quality standards are never compromised. The Small Print: This role requires working with technical documentation, tools, and regulatory systems in a dynamic MRO environment. The position involves physical tasks, including operating equipment and handling components, and requires a high degree of precision, accountability, and regulatory understanding. Occasional support during audits or out-of-hours operations may be expected. This is an overview of the role’s scope and its alignment with Unilode’s competencies and values. It is not an exhaustive list of responsibilities but serves as a guide to the key expectations and contributions of the position. Flexibility may be required to adapt to business needs. Requirements: Skills and Experience Required: • Trade-based qualification or aviation-related certification (A&P licence or FAA Repairman Certificate preferred)., • Proven experience in aviation maintenance, quality, or repair inspection., • Strong knowledge of Federal Aviation Regulations (FAR Part 121, 145)., • Ability to work in fast-paced environments with minimal supervision., • Skilled in problem-solving, process compliance, and technical documentation., • Proficient in Microsoft Office and general computer literacy., • Forklift certification (preferred)., • Able to lift, pull, and push items exceeding 65 lbs. Anyone who performs (or are available to perform) a safety sensitive aviation activity (SSAA) can be tested for drugs and alcohol without notice or as part of pre-employment checks.

Job Description We’re building a list of reliable tradesmen (framers, drywall, roofers, siding, painters, concrete, pavers, etc.) for ongoing residential and light commercial projects across New Jersey. If you take pride in your work, show up on time, and can work with a small crew or solo, we can connect you with steady day-rate jobs, no bidding, no apps, no nonsense. What We Offer • Work with trusted local companies who pay fast, • Get calls or texts directly, no middlemen, • Pick up extra work when your schedule is light, • Keep 100% of what you earn, • Free to join during pilot Who We’re Looking For Experienced in one or more of the following: • Framing, drywall, painting, roofing, siding, masonry, or pavers -Have your own tools and transportation -Reliable and available for day-rate or short-term project -No drama, just solid workmanship Pay $190–$650/day depending on trade and experience. Schedule • Monday to Saturday (optional Sundays), • Day-rate or short-term jobs available immediately How to Apply Apply here and tell us: • Your trade(s), • Your location, • Whether you’re solo or have a small crew Once we receive your info, we’ll send you the link to register and get matched with real contractors in your area. This is not a staffing agency or W-2 employment, you’ll work directly with licensed contractors. If you’re dependable and skilled, we’ll keep you busy. Job Types: Full-time, Part-time, Temporary People with a criminal record are encouraged to apply Work Location: In person sign-up here: https://careers.atzcrm.com/jobs/CrewFinderPro

This role leads electrical installations on high-end retail and large commercial projects, ensuring safe, code-compliant, and high-quality work.You oversee conduit and wiring installations, fire alarm systems, lighting and dimming controls, and mechanical power connections while guiding and supporti

Responsibilities: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand-stacks product from partial pallets onto full pallets of product.

Momentum Solar is a premier residential solar provider with offices throughout the U.Founded in 2009; Momentum has grown exponentially over the past decade.We implement the entire solar process to ensure a seamless transition to renewable energy.Pay rate: $35+/hr depending on experience.Installs, re

Join Premier Development as a Full Time Maintenance Technician in a vibrant residential community where your skills make a direct impact on residents' lives.This onsite position allows you to be at the heart of a dynamic environment, solving problems and enhancing the quality of living for the commu

This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. Preferably seven- (7) year's experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment.

URGENTLY HIRING FOR A INDUSTRIAL ELECTRICIAN FOR A LEADING SERVICES COMPANY IN ESSES COUNTY, NJ!.Travel daily from the Hillside facility to various industrial sites, including chemical plants, waste plants, and food production facilities across Northern New Jersey.Install, maintain, and repair indus

GreyStar - 505 Summit [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

Job Title: Warehouse Associate (Forklift Operator).Pay: $22–$25 per hour (based on experience).MechMaxx is a fast-growing equipment company specializing in agricultural, industrial, and outdoor power machinery.We supply a wide range of products including stump grinders, wood chippers, sawmills, fl

GreyStar - The Harper at Harmon Meadow [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and

ABF Freight - - Responsibilities: Load and unload trailers for the purpose of transporting a wide variety of cargo; Move cargo, drive a forklift or use a pallet jack or other freight handling equipment; Prepare wide varieties of freight for transit; Complete all required paperwork; Effectively oper

We are partnered with a well-established, industry-leading manufacturer seeking a hands-on Manufacturing Electrician to support plant operations and keep critical systems running efficiently.This is a high-impact role within a stable company known for strong leadership, long-term growth, and a colla

May be assigned to perform general duties in other trade areas. Successful completion of an approved training program or of a certified apprenticeship program in the trade, plus two years experience and proven competency performing complex and varied repair and maintenance of electrical equipment an

GreyStar - The Greyson [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

Hassle Free Home Services was born out of a realization that homeownership came with its share of surprises a never-ending to-do list, constant maintenance, and unexpected upgrades.Since 2003, we've assisted hundreds of homeowners with a simple motto: "one call solves it all.Our monthly home mainte

Aerotek is looking to hire several Journeyman Electrician for a new construction of a Data Center in Carteret, NJ.This is a 1st shift position and the pay is up to $37 an hour and you can start as soon as next week.If you meet the qualifications below, please apply to this job posting and an Aerotek

To provide skilled and semi-skilled repairs and preventative maintenance services to buildings, equipment and grounds on district school sites.

High Class Electric, LLC is growing and looking for a highly skilled and dependable.

Assist the Technical Director and Master Carpenter with the supervision of students in lab classes, work-study and in production for all WCT shows.Typically 4 main stage musicals, 4 supported black box productions and 4 workshops.The Master Electrician will supervise students as part of the general

Bonus + Full Benefits | Perth Amboy area of New Jersey.We are partnered with a well-established, industry-leading manufacturer seeking a hands-on Manufacturing Electrician to support plant operations and keep critical systems running efficiently.This is a high-impact role within a stable company kno

Responsible for organizing and synchronizing all job related activities between the field staff, dispatch, operations, laboratory and customers.Primary Duties and Responsibilities.Responsible for communicating with the dispatcher and operations/branch manager to ensure work requirements are met with

Are you a master of your maintenance trade, ready to make a bigger impact on apartment home living? If you're a seasoned Maintenance Technician with a passion for tackling complex challenges and taking properties to new heights, we want you on our team.

Five years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair.

Are you a hands-on problem solver who takes pride in keeping a community running smoothly? As a.Maintenance Technician at our residential community in East Orange, New Jersey.You'll perform a variety of maintenance tasks, from plumbing and electrical repairs to HVAC and carpentry work, all while uph

Must exercise discretion in identifying projects requiring the services of a higher skilled craftsperson.

Our company is seeking a skilled Maintenance Technician to join our team.