Skilled trade jobs in Passaic, New JerseyCreate job alerts

Job Description NJ Licensed Journeymen Electricians needed for an industrial project near Newark, New Jersey area. Who have strong hands-on experience in power systems and commissioning work. This role involves installing SPCS, landing 4/0 AWG grounding, and terminating 2/0 AWG by six power feeders at QF1, as well as landing a 480-volt auxiliary feeder. Electricians will be responsible for performing system power-up sequences, including starting a 300 kVA generator, closing breakers QF1, QF3, QF5, and QF6, energizing the UPS, and then closing QF7, QF8, and QF9. Candidates must also verify cell voltage using a laptop on the SW2 switch, identify and flag containers reading below 3.2448 nV, and recharge low state-of-charge containers using a 300 kVA, 480-volt three-phase generator until the SOC increases by 25 percent, which typically takes about four hours per container. You must have basic tools of the trade. You may be required to pass a pre-employment drug test and pass background check upon arrival. Paying up to $50/hr Per Diem: $95/ a day for days worked Duration: 2 weeks Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) Company DescriptionWe believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Role Summary The Trade Sales Consultant is responsible for building the Pella brand within the trade industry as their premier choice for window and door solutions. Achieve individual sales goals through a relational selling model throughout all active Pella product offerings. Provide well-rounded solutions, market expertise, and partnership by understanding customer needs and developing relationships with builders, contractors, architects, professional remodelers and trade organizations. Proactively originates new customer relationships through networking, referrals and face-to-face meetings. Help customers grow their business and offer a single point of contact for their ongoing needs. Continually strives for 100% “Very Satisfied” customers, growth as measured by market share/net sales and profitability. The Trade Sales Consultant’s (TSC) primary duty is outside sales within their assigned market of Northern New Jersey. The ideal candidate will have outside sales experience, some industry knowledge, and live in Northern New Jersey or Rockland County NY. The TSC is required to: • Spend over 50% of their time at customer sites generating account growth with planned quality meetings, as well as prospecting to develop new business., • Independently sets their own work hours. What Pella has to offer: • Competitive base salary plus uncapped commission, • Monthly bonus opportunities, • Milage reimbursement, • 401k plus 4% company match, • Medical, dental, and vision plan, • Health savings and flex spending plans, • Company paid life insurance, • Company paid short/long term disability insurance, • Employee Assistance Program, • Tuition reimbursement, • Professional development/growth opportunities, • Home office and build your own schedule The salary range for a Trade Sales Consultant can vary based on experience. The salary range is $57,000–$75,000 plus uncapped commission, and reflects factors such as experience, skills, certifications, education, location, and market conditions. This position includes standard IRS mileage reimbursement, paid training, and a comprehensive benefits package (medical, dental, vision, 401K match, and more). This is a performance-based role with unlimited earning potential—our compensation plan rewards results. You’ll represent premium, well-known products backed by a trusted, privately held company with a strong reputation for quality, innovation, and customer satisfaction, so you can sell with confidence. Responsibilities/Accountabilities: • Achieving individual sales and customer satisfaction goals and objectives., • Networking, lead and referral generation., • Actively represent Pella at company sponsored events, professional group’s invitations to discuss and/or present Pella products, trade association meetings and/or builder home shows., • Generating sales by acquiring new customers while building loyalty within existing customer relationships., • Responding to client concerns and applies independent decision making while striving for first-time resolution on all client problems/issues., • Maintaining exceptional level of expertise of products/services relating to Pella’s customers, as well as staying abreast of the competitive landscape., • Striving to build strong customer relationships by engaging in a consultative sales approach to recommend the products, total solutions and consistent follow up that satisfy the needs of the customer., • Ensuring quotes and orders are accurate following company sales procedure., • Educating customers on manufacturer installation guidelines and measuring of openings to ensure accuracy of product ordering and applications., • Leveraging other Pella team members/departments to assist with specific product requirements., • Thanking clients and encourage a continuing relationship by acting as their central point of contact., • Understanding of and adherence to the Trade Selling Process in all aspects of sales related interactions., • Collaborating with the Operations teams to ensure successful after sale service requirements and installations., • Interacting with Account Receivable department to address any potential billing/payment issues of customer., • Strong CRM systems tools capabilities leveraged to manage all customer interactions and proactively communicate to customers., • Occasionally working variable, non-traditional hours and making themselves available for customers during evenings and weekends. Skills/Knowledge • Able to develop partnerships with other businesses that serve the same customers, • Provide superb customer service and generate referrals from one customer to others, • Create a sense of trust and reliability with customers, • Skilled at relating to a variety of customers- balances poise and integrity with a service mentality, • Able to negotiate, build value and address objections towards closing a sale, • Work collaboratively with Pella team members and customers, • Enjoys working in fast-paced environment with a high sense of urgency, • Strong problem-solving skills, • Energized by meeting and engaging new people, skilled networker, • Demonstrates confidence balanced with humility, • Tenacious, able to persevere through sales challenges and setbacks, • Demonstrates a strong work ethic, flexible about hours, responsive to customer needs, willing to be available, • Excellent influencer- can sell something new, shift paradigms, convey the value proposition, • Seeks out internal experts and utilizes their knowledge, • Able to accurately read, interpret and take-off blueprints, • Adaptable to changing processes and priorities, • Works well without close supervision but always keeps their manager informed., • Focused on details and follow through, • Proficiency with Microsoft Office and smart devices, and ability to learn internal software programs and applications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree (B. A.) from four-year college or university; or one to two years related experience and/or training, or equivalent combination of education and experience. Individual’s motor vehicle record must also comply with company requirements. Must have the ability to manage multiple tasks in an environment of constant interruptions and be able to prioritize responsibilities. Language and Communication Skills Ability to read and analyze documents related to contracts and work documents. Ability to write reports and business correspondence. Ability to verbally present information and respond to questions from customers, managers, and the general public. Professional Skills Must present a clean and neat physical appearance and strictly abide by company dress code serving as a role model for other employees, customer and visitors. Reasoning Abilities Ability to solve practical and arithmetic problems and deal with a variety of concrete variables in situations where only limited standardization exists. Physical Demands While performing the duties of this job, the employee is regularly required to drive an automobile, stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds using proper lifting techniques. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. The noise level in the work environment varies between low to moderate in administrative offices and to moderate on constructions sites. Travel The vast majority of travel will be local. Must be able to drive to showrooms, job sites and customer/contractor locations and required company functions at various locations.

Job Description Position is Located in MINOT, North Dakota This is an on-site role based in Minot, North Dakota. Candidates must either currently reside in or be willing to relocate to the area. We’re looking for a skilled HVAC Technician who knows the trade and can handle service work without handholding. If you don’t have at least 2 years of real HVAC experience, do not apply. This is not a training position. Requirements: • Minimum 2 years of hands-on service experience in heating, cooling, and ventilation (residential or commercial)., • EPA Certification required., • Mechanical, gas piping, or other trade certifications are strongly encouraged., • Clean driving record – you’ll be driving a company vehicle., • No criminal record - you'll be in customer's homes and places of business., • Must be able to lift, push, and pull heavy items, 100+ lbs when needed., • Work includes tight spaces, roofs, ladders, and crawl areas – if you’re afraid of heights, confined spaces, or getting dirty, this isn’t the job for you., • Must know your way around hand tools, meters, gauges, and diagnostic equipment., • Show up on time, work hard, and treat customers and coworkers with respect., • Reside in or relocate to Minot, ND. We Offer: • Seriously Competitive pay based on experience, • Steady, year-round work, daily overtime available, • A solid team that values skill and reliability If you’re an experienced HVAC tech with your EPA certification and the drive to get work done right, we want to hear from you. Apply only if you meet the experience requirements. #hc207099

Job Description This is NOT an entry-level, apprentice, or quick-lube position. Experienced technicians only. About the Dealership We are a family-owned Toyota dealership, not a public company, currently expanding into a new, state-of-the-art service facility. Our service department operates at high volume with consistent, year-round work and a strong mix of customer pay, warranty, and internal repairs. We invest in our technicians, support continued training and certifications, and run a professional shop focused on fair dispatching, productivity, and respect for the trade. Position Overview We are hiring Mid-Level and Master Automotive Technicians to support continued growth. This role is ideal for technicians who can work independently, diagnose accurately, and consistently turn hours. Compensation is productivity-based with no cap. Technicians who perform well can earn $85,000–$150,000+ annually, depending on experience, certifications, and hours produced. Key Responsibilities • Diagnose and repair Toyota vehicles to factory and dealership standards, • Perform mechanical, electrical, and diagnostic repairs efficiently, • Maintain high levels of quality, accuracy, and productivity, • Accurately document work performed on repair orders, • Maintain a clean, safe, and organized work environment, • Work within a fair dispatch system designed to maximize technician efficiency, • Stay current with Toyota systems, tools, and evolving technology Qualifications (Experienced Technicians Only) • Proven automotive technician experience (mid-level or master level), • ASE Certifications preferred, • Toyota Certification strongly preferred, • Strong diagnostic and problem-solving skills, • Ability to work independently in a fast-paced, high-volume shop, • Valid driver’s license Entry-level, apprentice, and quick-lube candidates should not apply. Compensation & Benefits • Highly competitive, productivity-based pay with no earning cap, • $85K–$150K+ earning potential, • Union position with full union benefits, • Consistent year-round workflow, • Paid Toyota factory training, • Support for ASE and Toyota certification advancement, • Brand-new facility with modern diagnostic tools and equipment, • Comprehensive benefits package Why Join Us • Family-owned dealership with hands-on leadership, • Fair dispatching and consistent shop hours, • Technicians treated as skilled professionals — not numbers, • Long-term career stability and growth opportunities Confidential Applications Confidential applications are welcomed. We respect currently employed technicians and handle all inquiries discreetly.

Job title: Electrician \n\n Location: 1249 Newark Turnpike, Kearny, NJ 07032 \n\n Pay: $43.88ph \n\n Shift: 5:45 pm to 6:00 am - 36/48 schedule. During training, they need to be available from 5:45 am to 6:00 pm (2 to 3 months) \n\n Contract: Direct Hire \n\n \n\n The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and “common sense” safety policies and procedures. \n\n \n\n This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. \n\n \n\n Principal Duties and Responsibilities: \n\n\n\t • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem.\n\t, • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety\n\t, • Install and repair complex industrial equipment \n\t, • Helps to Maintains all Plant electrical and electronic sys.\n\t\n\t\t, • Assist in the development of PM and Predictive maintenance program for all motors and panels\n\t\n\t\n\t, • Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken components.\n\t\n\t\t, • When appropriate or when plant decides lead efforts for electrical root cause analyzes\n\t\t, • Establish a program to monitor all critical motor in the plant.\n\t\n\t\n\t, • Tests malfunctioning machinery and discusses malfunction with other maintenance workers.\n\t\n\t\t, • Be lead person for electrical downtime and trouble shooting\n\t\n\t\n\t, • Replaces faulty electrical components of machine such as relays, switches, motors, and position sensing devices.\n\t, • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion.\n\t, • Helps with electrical training of other maintenance personnel.\n\t\n\t\t, • Help coordinate electrical training program and efforts for the plant.\n\t\n\t\n\t, • Complies with safety requirements and notifies management of noted exceptions.\n\t, • Follows all environmental compliance polices & programs.\n\t, • Works as instructed with outside contractors.\n\t\n\t\t, • Be a lead person for all electrical projects and installation that are maintenance responsibility.\n\t\t, • Be maintenance contact person on automation projects.\n\t\n\t\n\t, • Willing to attend annual training for new or improved electrical & PLC sys.\n\t, • Comply with all plant rules\n\t, • Comply with safety regulations and maintain a clean and orderly work area\n\t, • All other duties as assigned or needed\n\t, • Regular Attendance on site and ability to rotate to varying shifts\n\n\n \n\n \n\n \n\n SKILLS AND ABILITIES \n\n \n\n The employee should hold the following abilities: \n\n\n\t • Basic Computer Skills\n\t, • Electrical: industrial electrical code. (local compliance issues) \n\t, • PLC\n\t, • Hydraulic\n\t, • Pneumatics\n\t, • Blueprint & Schematic reading and P&ID drawings.\n\t, • Basic Welding\n\t, • Fusing, thermal overload protection, wire sizing, motor theory, etc.\n\t, • AC, DC and Servo drive system (basics)\n\t, • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc.\n\t, • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant)Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant)\n\t, • Able to think under pressure and make quick decisions\n\t, • Ability to work well in a team or alone\n\t, • Able to communicate in English\n\t, • Good attention to detail\n\n\n \n\n COMPUTER AND SOFTWARE COMPENTENCIES \n\n\n\t • Must be able to operate a computer or other keyboard instrument \n\n\n \n\n EDUCATION AND/OR EXPERIENCE \n\n The employee should have the following: \n\n\n\t • High School Diploma or GED Equivalent\n\t, • PLC Training\n\n\n \n\n Experience: \n\n\n\t • Preferably seven- (7) year’s experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. \n\t, • Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. M\n\t, • ust have the ability to interpret instructions furnished in written, oral, diagram or schedule form. \n\t, • Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. \n\n\n \n\n ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT \n\n The employee should possess the ability to: \n\n\n\t • Do repetitive hand, arm, leg movements for several hours\n\t, • Climb on and off of fork truck\n\t, • Stand for 10 - 12 hours straight\n\t, • Climb and descend stairs for up to 12 hours continuously\n\t, • Lift and push and pull 50lbs. More than 100 times per day\n\t, • Squat, bend at the waist and knees freely\n\t, • Expose to sounds or noise levels that maybe uncomfortable\n\t, • Handle, control or feel objects, tools or control--continously\n\t, • Repeat movements\n \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\tAs part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined.\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

Now Hiring: Experienced Service Plumber.Position is located in Minot, North Dakota - Relocation is Required*.We're looking for a skilled plumber who knows the trade and can get the job done right.If you don't have at least 3 years of real plumbing experience, do not apply.This is not a training po

The purpose of the Maintenance Planner is to perform as professional, highly skilled and exceptionally competent maintenance person in addition to handling the certification, training and management of contractors and all planned maintenance. Preferably five (5) years in a related maintenance trade

Job Description About us • Join our team of professionals and apply for our elite brand ambassador job in New Jersey and be part of something great!, • Starting pay $30.00/hour., • Female-owned and known for our professionalism and progressive approach, we specialize in consumer activation and beverage marketing throughout the United States., • Our commitment to redefining industry standards, coupled with a relentless pursuit of innovation and always being prepared to deliver an unparalleled experience that outrivals expectations sets us apart from other experiential marketing companies., • We continue to defy industry stereotypes and set new standards of excellence. Join us in reshaping perceptions and proving that greatness knows no bounds. Together, let's showcase our industry's true potential and emerge as leaders in innovation and quality. Join Our Growing Team as a Brand Ambassador Are you a passionate advocate for bourbon, beer, wine, or other alcoholic beverages, and skilled in promotions, marketing, or sales? We're on the lookout for dynamic individuals for beverage promotions roles. Our team members represent our brands as on-premise Brand Ambassadors and off-premise Sales Professionals. Positions offers competitive pay and a flexible schedule that works around your availability, Responsibilities • If you are hired for the elite brand ambassador job in New Jersey you will conduct engaging consumer tastings at diverse locations, including liquor or package stores, grocery stores, bars, restaurants, festivals, sporting events, convenience stores, gas stations, and trade shows., • Deliver captivating product presentations, showcasing brand attributes and product features to potential customers., • Distribute enticing product samples and promotional materials to drive brand awareness and cultivate customer loyalty., • Engage with consumers, providing expert guidance, addressing inquiries, and enriching their tasting experience., • Exemplify our dedication to quality and customer satisfaction by representing our brands with enthusiasm and professionalism. Requirements Ideal Candidates The ideal candidate for our brand ambassador job in New Jersey will: • Demonstrate a genuine passion for the beverages we’re representing., • Brings previous sales or promotional experience to the role., • Possesses outstanding communication and interpersonal skills., • Has a flexible schedule to allow working evenings and/or weekends., • Has reliable transportation and is timely and reliable. Additional Details • Tasting events typically span 2-3 hours, often with multiple events per day/evening., • Must be at least 21 years old. Ready to seize this thrilling opportunity and help elevate our brands? Apply now! Competitive compensation and growth opportunities await. Benefits • Comprehensive training provided for candidates without prior experience., • Flexible Schedule, • Competitive wages

Job Description [Position] Korean Bilingual Supply Chain Coordinator Location : Fort Lee, NJ (100% Onsite) Full time role with benefits Salary : $55,000 as base per year [About Our Client] Steel distributor specializing in prime flat roll coated steel [Job Summary] We are seeking a Supply Chain Coordinator to support our purchasing, logistics, and import operations, ensuring compliance and efficiency. Responsibilities include processing purchase orders, coordinating with suppliers, verifying import documents, and overseeing customs clearance. The ideal candidate is detail-oriented, proactive, and skilled in problem-solving and vendor coordination to ensure smooth and timely deliveries. [Job Description] Manage purchase order operations and review purchase orders and contracts for compliance with company and departmental policies. ● Communicate with suppliers to resolve problems that may arise regarding delivery, quality, price, or conditions of sale. ● Assist in identifying and implementing process improvements in purchasing, inventory control, and logistics to reduce cost and enhance workflow efficiency and optimization ● Review and verify import documents, ensuring compliance with various import regulations, policies, and procedures, as well as company requirements. ● Classify goods using the appropriate customs tariff codes and stay up-to-date on customs regulations, tariff changes, and international trade policies. ● Oversee the customs clearance process, track shipments from origin to destination, and coordinate with the internal team, vendors, customers, shipping agents, freight forwarders, shipping lines, customs brokers, and government agencies to ensure smooth and timely deliveries. ● Calculate and manage duties, taxes, and other charges associated with import activities, ensuring cost efficiency and compliance. ● Proactively manage and mitigate risks in customs clearance and logistics, addressing potential compliance issues, delays, fines, or seizures before they escalate. ● Maintain accurate records of all customs transactions and generate reports on customs and logistics activities for management review. ● Perform other duties as assigned. Requirements Bachelor’s degree or work experience equivalent. Bachelor’s degree in Logistics, Supply Chain Management, Business Administration, Management, or a related field. Understanding of international trade regulations and logistics operations. Strong written and verbal communication skills, with the ability to exercise tact, courtesy, and ethics when dealing with vendors, co-workers, and customers. Excellent organizational skills and attention to detail, with the ability to manage multiple tasks efficiently. Proactive self-starter with strong problem-solving and analytical skills. Ability to multitask and meet deadlines in a fast-paced environment. Proficiency in Microsoft Office Suite (Excel, Word, Outlook) and Google Suite. Bilingual in Korean and English to effectively communicate with vendors and partners. Minimum 2 years of experience in purchasing, claims, logistics, or supply chain management. Proven experience with transportation management, customs compliance, and trade regulations. Proficiency in inventory management or ERP software. Benefits Health insurance (Including Dental and Vision) PTO Sick leave Holiday pay Fitness membership Catered lunch daily (or Lunch allowance)

Job Description We are seeking experienced technicians to provide specialized commercial repair services in the following trades: Plumbing, Electrical, HVAC, and General Repair. This is ongoing 1099 contract work for skilled professionals who can independently diagnose and complete a wide range of commercial repairs and facility maintenance tasks. Responsibilities Plumbing Perform commercial plumbing repairs and address drainage issues Execute leak detection and repair services Manage fixture replacements including toilets, faucets, and valves Conduct water heater troubleshooting and repair Electrical Diagnose and troubleshoot commercial electrical problems Install and run new lines and circuits Replace breakers, outlets, and various lighting fixtures Resolve complex power and electrical system issues Handyman and General Repair Complete professional drywall repair and painting Perform minor carpentry and commercial door repairs Replace ceiling tiles and various building fixtures Execute general facility maintenance tasks and work orders HVAC Troubleshoot commercial RTUs and other specialized units Repair or replace motors, belts, and thermostats Perform scheduled preventative maintenance Diagnose heating and cooling system issues Qualifications Proven commercial experience within your specific trade specialization Demonstrated ability to work independently with minimal supervision Possession of professional tools and reliable transportation Proper licensing and certifications as required by law Strong diagnostic and troubleshooting skills for commercial systems Professional communication skills for client interactions Benefits Consistent supply of commercial work orders Long-term contractor opportunities and partnerships Flexibility of 1099 contract work Company DescriptionWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnershipsWe are a facility management company with over 15 years of experience delivering reliable, high-quality services. Our team provides prompt, on-time responses to a wide range of store and facility needs, ensuring smooth operations for our clients. Trusted by numerous businesses, we are committed to excellence, efficiency, and long-term partnerships

Job Description About Flech Paper Products Flech Paper Products is a growing paper manufacturing and converting company producing matboards, display products, and paper-based components used in custom framing, printing, packaging, and retail display industries. We combine traditional craftsmanship with modern manufacturing equipment to deliver high-quality, precision-cut products to customers across the United States. We are expanding our production capacity and are looking for a hands-on Operations Supervisor to help lead our production floor and ensure smooth daily manufacturing operations. Position Overview The Operations Supervisor will oversee daily productions floor activity, production workflow, and order execution. This is a hands-on manufacturing leadership role with 80% on the production floor managing output, inventory and workorders with the other 20% of time management meetings and planning. You will work directly with production employees, machinery, and incoming orders to make sure work is completed accurately, on time, and safely. You will also work directly with management for planning purposes. We are looking for someone from a trade or manufacturing background who understands how production really works: machines break, materials run out, and schedules change. The right person can solve problems quickly and keep operations moving. The right person is a bridge between management and day to day production. Responsibilities Production & Floor Management • Supervise daily manufacturing operations and production floor workflow, • Assign work to production staff and monitor productivity, • Coordinate production schedules and priorities, • Ensure orders are completed accurately and shipped on time, • Maintain a clean, organized, and safe production environment, • Assist with hiring, training, and coaching production employees Order Tracking & Workflow • Track active jobs from order intake through completion, • Communicate production status internally, • Identify bottlenecks and improve workflow efficiency, • Verify work orders, specifications, and quantities before production, • Coordinate rush orders and production adjustments Inventory Management • Monitor raw material inventory., • Maintain reorder levels and notify purchasing when supplies run low, • Perform cycle counts and periodic inventory checks, • Reduce waste and material loss, • Organize storage areas for efficient material handling Machinery Oversight & Troubleshooting Operate and oversee the following equipment: • Gunnar computerized mat cutters, • Guillotine cutters, • Laminators and other sheeting equipment Responsibilities include: • Basic troubleshooting and machine adjustments, • Identifying mechanical or operational issues early, • Performing routine maintenance checks, • Coordinating service and repairs when necessary, • Training staff on proper machine operation and safety Required Qualifications • 3+ years experience in manufacturing, print shop, converting, framing, laminating, metal shop, packaging, or similar production environment, • Experience supervising or leading shop floor employees, • Strong mechanical aptitude, • Experience tracking jobs or work orders, • Familiarity with inventory control, • Comfortable working in a hands-on production environment Preferred Backgrounds Ideal candidates may come from: • Production leads or finishing department, • Framing production facility, • Packaging manufacturing, • Sign shop / display manufacturing, • Machine shop or fabrication shop, • Construction or skilled trade, • Converting or paper manufacturing Personal Qualities We’re Looking For • Fast learner and adaptable, • Problem solver (fix issues instead of waiting for instructions), • Organized and detail-oriented, • Reliable and punctual, • Comfortable working on their feet most of the day, • Willing to take ownership of the production floor and buys into our brand and products we manufacture, • Strong communicator with production staff and management, • Committed to working 5 days per week on-site in a manufacturing environment Work Schedule Full-time, in person — 5 days per weekMonday – FridayMonday – Thursday 7:15am to 4:00pm; Friday 7:30am to 3:00pm. (45 minutes break paid daily break 1: 10:00am – 10:15am; break 2: 12:00pm – 12:30pm) Compensation & Benefits • Competitive salary (based on experience) plus year end bonus commiserate with performance., • Growth opportunity into Operations Manager role within a year or two., • Stable, year-round manufacturing work as we are growing., • Opportunity to help build and improve a growing production operation Why This Role Matters This position is critical to our company. The Operations Supervisor is the person who ensures orders move, machines run, and production happens. You will play a direct role in scaling our manufacturing output and improving operational efficiency.

Job Description Daily responsibilities vary greatly for remodelers depending on the property where they’re working and the types of building and repair tasks which need to be performed. The core duties that remodelers perform, however, are universally the same whether they work for themselves or within a company dynamic. Assess Work Sites Remodelers assess work sites where remodeling work is desired, and determine what needs to be done to complete the requested remodel work. Perform Carpentry Work Remodelers perform various carpentry tasks that include installing cabinets, hanging doors, and framing rooms. Replace Plumbing Fixtures Remodelers replace plumbing fixtures such as sinks, toilets, and faucets. Hang Drywall Remodelers hang, repair, and replace drywall as needed for new and existing rooms. Install Flooring Remodelers install floors, including wood floors, carpeting, concrete, and other flooring types. Lay Tile Remodelers install new tilework on floors and walls, place new grout, and repair existing tile. Follow All Building Codes Remodelers take out all required permits and follow building codes as set forth by city, county, and state laws. Make Repairs Remodelers repair existing property elements when possible. Perform Finish Work Remodelers install and replace trim, molding, windows, and perform other finish work. Replace Light Fixtures Remodelers replace light fixtures and ceiling fans. Clean Job Sites Remodelers clean up job sites during and after remodeling work. Remodeler Skills and Qualifications Remodelers use physical ability and mechanical skills to replace and repair walls, floors, roofs, cabinets, counters, and fixtures of all types in order to build new rooms and refurbish existing rooms. Employers and individuals look for remodelers who have the skills needed to perform these tasks. • Mechanical skills – remodelers use a variety of tools and perform many different tasks that include carpentry, plumbing, and light electrical work., • Communication – remodelers work collaboratively with construction workers and other professionals, which requires excellent verbal communication skills., • Physical ability – remodelers use physical ability to work with their hands and perform many tasks that require squatting, standing, and bending for hours at a time., • Attention to detail – because different aspects of remodeling work depend upon each other to function properly and look good, remodelers pay close attention to ensure that all work is performed well and correctly., • Multi-tasking – as remodelers perform work on different projects and rooms while using a vast variety of remodeling skills, multi-tasking is an essential component of the job. Tools of the Trade Remodelers work regularly with the following tools: • Hand tools (hammers, screwdrivers, saws, demolition bars), • Power tools (drills, nail guns, saws)Company DescriptionWe've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects. As a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects.\r\n\r\nAs a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.

Job Description About the Role. We’re looking for a skilled installer to handle bathroom vanity installations and shower sliding glass door systems. This role requires precision, attention to detail, and the ability to work independently in residential homes. You’ll be responsible for delivering clean, professional installations that meet high-quality standards and leave customers confident in the finished product. Key Responsibilities. This person will do all Pre- Measures before order is placed for vanities & special ordered glass. • Install bathroom vanities, including leveling, securing, and finish work, • Disconnect and reconnect basic plumbing (P-traps, supply lines, faucets), • Install sliding and/or frameless shower glass doors, • Apply silicone and sealants for waterproofing, • Ensure all installations are level, secure, and visually clean, • Troubleshoot job site challenges (uneven walls, out-of-square openings, etc.), • Maintain a clean and professional job site Required Skills & Experience • 2+ years experience in bathroom installation, finish carpentry, or glass installation, • Strong measuring and layout skills, • Experience installing shower doors (sliding or frameless preferred), • Basic plumbing knowledge, • Comfortable working with power tools and glass materials, • Ability to lift and maneuver heavy vanities and glass panels, • Valid driver’s license and reliable transportation Preferred (Not Required) • Experience with frameless/custom glass systems, • Remodeling or multi-trade background, • Customer-facing experience What We Offer • Competitive pay based on experience, • Consistent, year-round work, • Opportunities for advancement (lead installer, project management), • Supportive team and organized scheduling Why This Role Matters: This position is critical to delivering a high-quality finished bathroom. The right person takes pride in precision work and understands that small details make a big difference. How to Apply Submit your resume or a brief summary of your experience, including: • Types of installs you’ve completed, • Tools and materials you’re comfortable working with, • Any relevant photos of past work (if available)

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Dental insurance, • Employee discounts, • Flexible schedule, • Health insurance, • Vision insurance Skilled Handyman (Growth Track to Field Supervisor) Ace Handyman Services Montclair (Ace Hardware Family) $30$35 per hour + Quarterly Performance Bonuses MondayFriday | 8:00 a.m.5:00 p.m. (Flexible within window) Full-Time or Part-Time | W-2 Position | No Nights | No Weekends Were Hiring One Professional Not Just Filling a Slot Ace Handyman Services Montclair is seeking a high-level skilled handyman who takes pride in quality workmanship, professionalism, and customer service. We are a structured, organized operation built on exact appointment times, respect, and five-star standards. This position offers a clear path to grow into a Lead Craftsman / Field Supervisor as our company expands. If youre sharp, dependable, and serious about your trade, keep reading. What Youll Do You will perform a wide range of residential repairs and improvements, including: • Finish carpentry and trim work, • Door installation and adjustments, • Drywall repairs, • Interior painting, • Tile repair and installation, • Light plumbing repairs, • Light electrical work, • General home maintenance and repair You will work directly with homeowners and represent our brand. Professionalism and attention to detail matter. Qualifications • 5+ years of residential repair or carpentry experience, • Strong finish carpentry skills, • Ability to perform light plumbing and electrical, • Strong problem-solving ability, • Highly organized and punctual, • Self-driven no babysitting required, • Valid drivers license with clean driving record, • Own professional-grade tools, • Must have your own reliable vehicle in clean, presentable condition (you represent our franchise at customer homes), • Ability to pass background check Communication is critical: You must be articulate and professional when speaking with customers. You should be able to clearly explain scope of work, pricing, and project details, and document job notes accurately. Strong communication skills are required for future leadership opportunities. What We Offer • $30$35 per hour (based on experience and professionalism), • Quarterly performance bonuses based on efficiency and quality, • Medical, dental, and vision insurance options, • PTO and sick time accrual, • Year-round steady work, • Flexible scheduling within business hours, • Professional, respectful work environment, • Clear opportunity for advancement into leadership Our Culture We operate with structure, respect, and accountability. No chaos. No drama. No yelling. We protect our reputation and expect our team to do the same. Ace Handyman Services Montclair is proud to be an equal opportunity employer. Women and all qualified candidates are strongly encouraged to apply. If you are a skilled, dependable professional looking for stability, strong pay, and room to grow apply today. Were hiring one person. Make it count.

Job Description SUMMARY The Machinist role focuses on producing high-precision components by setting up and operating various manual machining equipment. This position requires a strong understanding of machining techniques, materials, and blueprint interpretation to ensure parts meet strict specifications. It offers hands-on work in a technical environment where attention to detail and problem-solving are key to success. RESPONSIBILITIES • Prepare, set up, and operate manual machining equipment such as lathes and milling machines to manufacture precision parts, • Interpret engineering drawings and technical schematics to determine measurements, tolerances, and machining approach, • Measure and verify finished components using precision instruments including micrometers, calipers, and gauges, • Select and apply appropriate tooling, cutting instruments, lubricants, and coolants based on material type, • Perform material layout by marking and measuring reference points prior to machining, • Inspect completed parts to ensure they meet quality standards and specifications, • Identify and troubleshoot machining issues, making necessary adjustments to maintain efficiency and accuracy QUALIFICATIONS • High school diploma or equivalent required, • Technical training or completion of a machining apprenticeship preferred, • Solid understanding of machining practices, fabrication, and shop processes, • Strong mathematical ability, including calculations for speeds, feeds, and angles, • High attention to detail with a focus on precision and quality, • Ability to diagnose and resolve mechanical or operational issues BENEFITS • Competitive hourly pay in the upper market range for machinists, • Comprehensive benefits package including medical, dental, vision, and life coverage, • Retirement savings plan, • Paid time off to support work-life balance, • Profit sharing opportunities, allowing you to benefit from company success, • Stable, hands-on role with long-term career growth in a skilled trade environmentCompany DescriptionWith over thirty-five years of Recruiting, Staffing and HR Consulting experience providing nationwide service to many of the largest organizations in the country, Spectrum has achieved a level of experience and expertise that benefits our clients, candidates and contractors. Through an in depth analysis of our client’s organization, we develop an understanding of the skills and experience required for the successful candidate or contractor. EXPERTISE: Our Staffing Consultants are specialists in Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement. STAFFING OPTIONS: Spectrum offers a number of staffing options including, Direct Hire, Contract, Temp, Retained Search, Recruiting Process Outsourcing (RPO) and Pay-Rolling (Payroll Transfer). CANDIDATE COMMITMENT: Spectrum is committed to working with the top candidates and contractors in the country and developing a working relationship with them to secure the career opportunities that will match their skills, experience and personal aspirations. OPEN POSITIONS: To apply online for our career opportunities go to our job board. www.spectrumstaffingusa.com SPECIALTIES: Areas of specialization include: Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement.With over thirty-five years of Recruiting, Staffing and HR Consulting experience providing nationwide service to many of the largest organizations in the country, Spectrum has achieved a level of experience and expertise that benefits our clients, candidates and contractors. Through an in depth analysis of our client’s organization, we develop an understanding of the skills and experience required for the successful candidate or contractor. \r\n\r\nEXPERTISE: \r\nOur Staffing Consultants are specialists in Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement. \r\n\r\nSTAFFING OPTIONS: \r\nSpectrum offers a number of staffing options including, Direct Hire, Contract, Temp, Retained Search, Recruiting Process Outsourcing (RPO) and Pay-Rolling (Payroll Transfer).\r\n \r\nCANDIDATE COMMITMENT: \r\nSpectrum is committed to working with the top candidates and contractors in the country and developing a working relationship with them to secure the career opportunities that will match their skills, experience and personal aspirations.\r\n\r\nOPEN POSITIONS:\r\nTo apply online for our career opportunities go to our job board. www.spectrumstaffingusa.com\r\n\r\nSPECIALTIES: \r\nAreas of specialization include: Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement.

Job Description Staff Management Group is seeking an Industrial Machine Mechanic for our client in East Rutherford, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 7AM - 3:30PM, • Monday - Friday, • Some weekends, • Plus overtime Pay Rate: • $28 - $30 / hour Job Summary: We are seeking a skilled Industrial Machine Mechanic to inspect, troubleshoot, repair, and maintain industrial machinery and equipment. This role requires strong mechanical and electrical knowledge, the ability to work with fluid systems, and experience dismantling and rebuilding equipment to ensure safe and efficient operations. The ideal candidate is dependable, detail-oriented, and available to work overtime when needed. Job Responsibilities: • Visually inspect machinery and equipment and troubleshoot issues as needed, • Dismantle defective machines and equipment and install new or repaired parts, • Clean and lubricate shafts, bearings, gears, and other machine components, • Install and repair electrical components such as transformers, wiring, and related part, • Repair plumbing and piping systems including air and hydraulic systems, • Operate cutting torch and welding equipment to cut or join metal parts, • Perform preventive maintenance to minimize downtime and equipment failure, • Follow safety procedures and ensure work is completed according to company standards, • Maintain a clean, organized, and safe work area, • Assist with additional maintenance tasks as assigned Job Requirements: • MUST be bilingual - English AND Spanish, • Trade/Technical School certification or equivalent experience preferred, • Minimum 3 years of related maintenance experience required, • Strong mechanical and electrical troubleshooting skills, • Ability to read and interpret blueprints, safety rules, and maintenance instructions, • Ability to troubleshoot mechanical and fluid equipment, • Forklift certification required, • Must be available to work overtime when necessary Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Job Title: Plumber Mechanic Job Description This role directs the installation of plumbing systems, equipment, and fixtures on a variety of construction projects. You will plan, lay out, participate in, and supervise plumbing work both on job sites and in the shop, working with a high degree of independence on maintenance, repair, and construction assignments. You will coordinate with field leads, use construction management software to receive work orders, and ensure all installations and modifications comply with specifications and building codes. Responsibilities • Plan and lay out plumbing systems for construction, retrofit, addition, and remodeling projects using blueprints, rough plans, sketches, drawings, and existing components., • Direct, supervise, and participate in the installation of plumbing systems, equipment, and fixtures on job sites and in the shop., • Lead and coordinate helpers and junior mechanics to run storm and sanitary lines and ensure work progresses safely and efficiently., • Install and work with cast iron, PVC, and related plumbing materials using appropriate hand tools and trade techniques., • Set up, install, and maintain water and temporary water lines to support construction and renovation activities., • Analyze defects and malfunctions in plumbing equipment and systems to determine necessary repairs and corrective actions., • Lay out, mark, and prepare work areas for plumbing installations, ensuring accurate measurements and alignment., • Use construction software and written job requests to receive, prioritize, and document maintenance, repair, and construction assignments., • Perform maintenance and repair tasks on plumbing systems as requested through software, written job orders, and emergency calls., • Ensure all work complies with applicable specifications, building codes, and industry standards throughout construction and remodeling projects., • Collaborate with leads and other trades on site to coordinate work sequences and resolve technical or scheduling issues., • Respond to feedback from users and project stakeholders, making adjustments as needed during and after project completion., • Maintain tools, equipment, and work areas in a safe, organized condition and follow all safety procedures on job sites. Essential Skills • Thorough knowledge of the practices, methods, materials, tools, and equipment used in the plumbing trade., • Ability to analyze defects in plumbing equipment and systems and determine appropriate repairs., • Ability to read and interpret blueprints and to lay out work from prints, rough plans, sketches, drawings, and broken parts., • Proficiency in installing plumbing systems, including storm and sanitary lines, using cast iron, PVC, and related materials., • Skill in using hand tools and trade-specific equipment for plumbing installation and repair., • Ability to lay out and mark plumbing runs accurately for new installations and modifications., • Experience working with water and temporary water lines on construction projects., • Capability to work with considerable independence while following general direction and supervision from on-site leads., • Strong understanding of construction and building code requirements related to plumbing systems. Additional Skills & Qualifications • Cast iron plumbing experience is a significant plus., • Experience running crews or working with helpers and junior mechanics on construction projects., • Experience in plumbing work on retrofit, addition, pharmaceutical, and new construction projects., • Comfort working on low- to mid-rise projects, typically five stories or less., • Familiarity with construction management or work order software to receive and track assignments. Why Work Here? You will join a team that focuses on diverse plumbing construction projects across New Jersey, including retrofits, additions, pharmaceutical facilities, and new builds up to five stories. The organization offers the opportunity to work on technically interesting projects, grow your skills alongside experienced tradespeople, and take on increasing responsibility in leading field work. You can expect a steady pipeline of projects and a collaborative environment where field input is valued and craftsmanship matters. Work Environment You will work as part of a plumbing team on various construction sites throughout New Jersey, primarily on retrofit, addition, pharmaceutical, and new construction projects up to five stories. The role involves both field and shop work, using hand tools and standard plumbing equipment to install cast iron, PVC, and related materials. Work assignments for maintenance and repair come through construction software, written job requests, and emergency calls, and you will operate under general direction from on-site leads. The environment is typical of active construction sites, requiring adherence to safety procedures, appropriate work attire, and readiness to work in varying site conditions and stages of building completion. Job Type & Location This is a Contract to Hire position based out of Jersey City, NJ. Pay and Benefits The pay range for this position is $25.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jersey City,NJ. Application Deadline This position is anticipated to close on May 29, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We’re building a list of reliable tradesmen (framers, drywall, roofers, siding, painters, concrete, pavers, etc.) for ongoing residential and light commercial projects across New Jersey. If you take pride in your work, show up on time, and can work with a small crew or solo, we can connect you with steady day-rate jobs, no bidding, no apps, no nonsense. What We Offer • Work with trusted local companies who pay fast, • Get calls or texts directly, no middlemen, • Pick up extra work when your schedule is light, • Keep 100% of what you earn, • Free to join during pilot Who We’re Looking For Experienced in one or more of the following: • Framing, drywall, painting, roofing, siding, masonry, or pavers -Have your own tools and transportation -Reliable and available for day-rate or short-term project -No drama, just solid workmanship Pay $190–$650/day depending on trade and experience. Schedule • Monday to Saturday (optional Sundays), • Day-rate or short-term jobs available immediately How to Apply Apply here and tell us: • Your trade(s), • Your location, • Whether you’re solo or have a small crew Once we receive your info, we’ll send you the link to register and get matched with real contractors in your area. This is not a staffing agency or W-2 employment, you’ll work directly with licensed contractors. If you’re dependable and skilled, we’ll keep you busy. Job Types: Full-time, Part-time, Temporary People with a criminal record are encouraged to apply Work Location: In person sign-up here: https://careers.atzcrm.com/jobs/CrewFinderPro

Job Description Overview Overview The Outside Sales & Design Consultant is a skilled salesperson with a strong results record, providing exceptional service in custom designs and organizational solutions for homes and select small to mid-sized business environments. This role designs and sells custom spaces to customers in their homes and business locations by appointment. This position manages and coordinates all phases of customer projects from in-home consultation, design, installation, and organizing to provide a seamless customer experience. This role is also responsible for building repeat clientele, receiving customer referrals, and creating their own leads in addition to leads provided by TCS. In addition, this role identifies and develops B2B and trade relationships such as property managers, builders, real estate professionals, senior living communities, and small commercial clients by delivering scalable, repeatable organization solutions that drive long-term partnerships and recurring revenue. This role serves as part of a Custom Space Outside Sales and Design team for their local market and is a full-time exempt position offering a competitive base salary complemented by a ramp-up period and a lucrative monthly bonus incentive tied directly to sales performance. What We Stand For Established in 1978, The Container Store has grown to be the leading specialty retailer of storage and organization products in the United States and the only national retailer solely devoted to the category. We provide creative, multifunctional, customizable storage and organization solutions that help our customers save time, save space and improve the quality of their lives. We foster a culture built around our Foundation Principles, which define how we approach our relationships with our employees, vendors, customers and communities and influence every aspect of our business. Responsibilities • Meets or exceeds sales goals, conversions, and positive customer surveys by inspiring, designing, and confidently selling complete, functional, and aesthetically appealing solutions for residential, business, and trade clients across all applicable spaces, • Ability to establish trust, rapport, and understand customer needs to design and present projects and customized plans in a clear and professional manner, • Accountable for managing and maintaining multiple, simultaneous customer projects with a high level of detail, accuracy, timely follow-up, and consistent, concise communication, • Develops clientele and new leads through ongoing customer relationships, networking, referrals, and professional partnerships, • Builds relationships within the local community by connecting with interior designers, home builders, realtors, property managers, senior living professionals, and other business partners, • Identifies, develops, and manages small to mid-sized B2B and trade opportunities, including multi-unit, repeat, or phased projects, • Arrives promptly to all scheduled appointments and work assignments, and attends installations as needed to ensure a positive customer experience and identify referral opportunities\, • Maintains discretion related to all confidential and sensitive company and customer informationWe believe in taking care of our team. That’s why we offer a comprehensive benefits package that goes beyond just health insurance (though we’ve got that covered too!). Here at The Container Store, we’re passionate about helping you contain your health, grow your career, and find balance in your life.We also provide rewarding pay that recognizes the value you bring to the team, including up to an 8-week paid training program, followed by a $35,000 base draw and the opportunity to earn upwards of $120,000 in total take-home pay through uncapped commission. Experience and Skills Required • College degree preferred with 2-5 years of outside sales experience preferred; custom spaces or closets experience preferred, • Self-starter who is organized, creative, solutions-oriented, and able to manage time, appointments, and projects efficiently in a white glove customer service space, • Knowledge of design principles and trends in custom spaces, interior design, fashion, and retail industries, • Professional appearance and demeanor, with the ability to communicate clearly and effectively at all levels both verbally and in writing, • Flexible and positive attitude, with the ability to prioritize high-value tasks and adapt quickly to shifting priorities, • Proficiency in Microsoft Outlook, Word, and Excel; Salesforce; AutoCad based design tools; and Windows-based systems, with strong overall technical skills, • Reliable transportation for customer appointments within a travel radius of up to 100 miles; must maintain valid automobile insurance and meet applicable state inspection standards, • Willingness to work a flexible schedule, including evenings, weekends, and additional hours as needed to meet customer and business demands, • Must be at least 18 years of age The Container Store promotes a smoke-free, drug-free environment. We are proud to be an Equal Opportunity Employer and comply with the Americans with Disabilities Act Stores Physical Requirements State Specific Notices

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Responsibilities: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand-stacks product from partial pallets onto full pallets of product.

GreyStar - The Greyson [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

Aerotek - - Responsibilities: Operate a single propane sit-down forklift safely in an outdoor concrete yard; Handle concrete and asphalt products, including loading, unloading, and moving materials; Load pallets into a pallet injector and start the machine; Run the stretch wrapper machine and adjus

GreyStar - 505 Summit [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

Graduate of a trade or vocational school program in building maintenance or related field preferred.

The Assistant Electrician is responsible for assisting the Electrician in maintaining all electrical components to ensure they are safe and operable.The Assistant Electrician should be aware of sustainable practices and take proactive steps towards applying these principles in their daily work.As wi

ABF Freight - - Responsibilities: Load and unload cargo; Operate a forklift as needed; Perform pickup and delivery of cargo; Inspect tractor/trailer and perform tractor setup; Log loading sheets and complete routine paperwork.

Journeyman Electrician - New York, Ny.We have openings for electricians around New York, NY.Some of these jobs are high profile projects.We are especially in need of journey level and supervisory level workers.All benefits are 100% employer paid.Opportunity for every skill level.Free upgrade and lea

Rate of Pay - $2,038 per week per CBA.Installation, repair, replacement, and maintenance of electrical systems.Install electrical wiring, fixtures and equipment as part of the building infrastructure as well as its associated machinery and lighting systems.Perform routine maintenance on electrical s

Cider - Electrician (Not Eligible to Drive).Follow verbal and written instructions.Safe use of hand & power tools.Report to and assist immediate supervisor.Perform quality work as determined by project specifications.Accountable for all tools and materials at the end of your shift.Must work well as

Lockheed Martin - - Responsibilities: Perform facility maintenance and facility support including electrical maintenance and installation; Install, test, and maintain heavy duty and high power electrical systems including distribution and substation equipment; Troubleshoot electrical and HVAC syste

Three years experience in the trade working under a licensed electrician or 2 years working under a licensed electrician after successfully completion of a trade school. Skilled in the performance of all phases of electrical repair and maintenance.

Responsible for following procedures and techniques of the electrical trade throughout the Medical Center. At least five (5) years experience as an Lead Electrician and a trade school graduate.

Anderson Electric Corp is looking to bring on an experienced electrical mechanic due to increased.We specialize in high-end residential and light commercial work throughout Essex County.We're looking for someone who:.Takes pride in clean, professional work.Is reliable and easy to work with.Can work

Location: 910 Elm St, Mckinney, Tx, 75069 Schedule: 6PM - 6AM (Day/Night Shifts Available) Starting Pay: $20/hr Overtime opportunities available.Time and a half! Must be able to pass a driven forklift exam.Must be willing to undergo an onsite drug screen.Comprehensive Benefit Package including M

To provide skilled and semi-skilled repairs and preventative maintenance services to buildings, equipment and grounds on district school sites.

Facility Solutions Group is dedicated to timeless contribution and service in lighting, electrical, energy, and technology fields.Our mission is to consistently provide our customers with superior value through quality products, service and support by contributing to the quality of life of all emplo

We are partnered with a well-established, industry-leading manufacturer seeking a hands-on Manufacturing Electrician to support plant operations and keep critical systems running efficiently.This is a high-impact role within a stable company known for strong leadership, long-term growth, and a colla

This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. Preferably seven- (7) year's experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment.

GreyStar - The Harper at Harmon Meadow [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and

May be assigned to perform general duties in other trade areas. Successful completion of an approved training program or of a certified apprenticeship program in the trade, plus two years experience and proven competency performing complex and varied repair and maintenance of electrical equipment an

Collaborate with other electricians and trades on-site to coordinate tasks and meet project timelines.

Journeyman Electrician - Western New York.We have openings for electricians across Western New York.Some of these jobs are high profile projects.We are especially in need of journey level and supervisory level workers.All Benefits are 100% employer paid.Opportunity for every skill level.Free upgrade

Imerys is the world's leading supplier of mineral-based specialty solutions for the industry with €3.The Group offers high value-added and functional solutions to a wide range of industries and fast-growing markets such as solutions for the energy transition and sustainable construction, as well a

A reputable recruiting firm seeks a Lead Commercial / Industrial Electrician for a position in Covington/East Atlanta, GA.The role offers $38–$42 per hour, managing commercial and industrial projects with a strong backlog of work.Candidates should have over 8 years of experience, strong troublesho

Bonus + Full Benefits | Perth Amboy area of New Jersey.We are partnered with a well-established, industry-leading manufacturer seeking a hands-on Manufacturing Electrician to support plant operations and keep critical systems running efficiently.This is a high-impact role within a stable company kno

A well-established electrical contracting firm is looking for a Lead Commercial/Industrial Electrician in the greater Atlanta area.This role involves overseeing projects, leading helpers, and working hands-on in the field.Candidates should possess 8+ years of electrical experience, strong troublesho