Software development engineer jobs in Edison, New JerseyCreate job alerts

Job Description At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a dedicated Senior Cost Engineer to join our talented team at our office located in Somerset, New Jersey. In this role, you will be assigned to projects to review, coordinate, and summarize the activities of cost control, planning and scheduling, document control, and estimating. You will also support the Project Manager in the delivery of individual projects, focusing on quality objectives and ensuring the achievement of safety objectives on assigned projects. Additionally, you will coordinate resources to achieve project goals, interact with clients on assigned projects, and promote positive relationships. Position Responsibilities • Identifies and analyzes potential project problems., • Develops working knowledge of prime contract requirements and applies knowledge to project activities., • Coordinates review and approval from the Project Executive and/or Director of Operations, and communicates this information to the project team., • Supports the Project Manager in the following:, • Development and maintenance of written project scopes of work and communication of this information to the project team., • Development and maintenance of project schedules, including targeted and actual activity lists, durations, and sequencing logic, and communicating this information to the project team., • Monitoring and reporting project costs., • Development of change control documentation and related financial documentation., • Coordination of safety resources to monitor site safety and correct nonconformances., • Procurement and coordination of all required project resources, including intra-divisional, inter-divisional, and extra-corporate., • Preparation of subcontracts, purchase orders, change control documentation, and related financial documentation., • Evaluation of vendor and subcontractor invoices., • Facilitating communication between project participants and producing documentation of communication between project participants., • Develops a thorough understanding of contractually required quality in design and construction and supports quality assurance for the project., • Supports the Financial group in the preparation of invoices to clients. Qualifications & Requirements • 16+ years of professional experience., • Bachelor’s degree in a technical field: engineering, project management, construction management., • Experience in cost engineering, estimating, scheduling, and earned value management., • Has a working knowledge of the project budget and identifies exceptions to the project budget throughout the execution of the project., • Experience in developing and managing multiple concurrent projects and in developing and executing PMO best practices., • Experience in all facets of Engineering, Procurement, and Construction Management (EPC)., • Professional credentialing is strongly encouraged: CCT or CCP, CST or CSP, EVP, CMIT or CCM, PMP, EIT., • High level of computer expertise in multiple industry-wide software products, • MS Office Products, • Scheduling software such as Primavera and MS Project, • Client ERP systems such as JDE, QUAD, SAP, ARIBA, CONCUR, • A safety-minded individual who must comply with the IPS Mission Zero Safety policy., • Capable of working alone or as part of a team without a significant level of supervision., • The employee is frequently required to stand, walk, and sit for long periods of time with extended computer use., • Experience working in both a Home Office and a Field environment., • Travel to client sites as needed., • This position is a safety-sensitive position., • The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That’s only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

Req ID: 347366 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Polyglot Software Developer - Azure (AI focus) to join our team in WARREN, New Jersey (US-NJ), United States (US). Job Duties and Responsibilities: We are looking for an experienced Polyglot Software Developer with extensive expertise in the Microsoft Azure ecosystem to contribute to the technical delivery of an enterprise-grade application within an Agile framework. This position encompasses comprehensive responsibilities including the identification and development of reusable components, implementation of software design patterns, oversight of development processes, and management of integration requirements. The successful candidate will collaborate effectively with both internal and external integration teams to deliver scalable and secure solutions. Need to work in Noon shift with overlap of 5 Hrs. with Onsite. Key Responsibilities: 1. Technical Leadership • Prioritize AI throughout the SDLC., • Skilled in AI-assisted coding tools for higher productivity., • Skilled in one stack and adaptable polyglot engineer across entire application stack., • Design and develop solutions with Azure, ReactJS and .NET., • Set standards in code, reviews, and best practices., • Guarantee architecture compliance, performance, and technical quality. 2. Agile Delivery • Work with the Product Owner and Scrum Master to plan sprints, estimate tasks, and refine the backlog., • Break down business requirements into technical stories or tasks., • Participate in daily stand-ups and technical ceremonies as required. 3. Integration Ownership • Contribute to all aspects of application integration, including REST APIs, Azure Service Bus, Event Grid, Logic Apps, and other Azure Integration Services., • Serve as the primary point of contact for integration requirements, coordinating with platform and partner teams as necessary., • Prepare and verify API contracts, data models, event schemas, and integration patterns through comprehensive documentation and validation processes. 4. Requirement & Interface Management • Convert application-specific features into precise technical artifacts., • Coordinate system interface specifications, data flow processes, and communication protocols. 5. Stakeholder Communication • Share technical vision, risks, and progress with architects, project managers, and business stakeholders., • Participate in cross-team architecture and design discussions as an application representative. 6. DevOps & Quality Assurance • Advocate for CI/CD best practices., • Oversee implementation of monitoring, logging, and alerting through Azure Monitor, Application Insights, and Log Analytics., • Ensure thorough automated testing, adherence to secure development protocols, and readiness for release. Required Skills: • 5+ years of Experience with Azure PaaS (App Services, Functions, API Management, Service Bus, Event Grid, Logic Apps)., • 5+ years of Skilled exp in .NET Core, C#, Web APIs, ReactJS, and SQL Server RDBMS., • 5+ years of Proficient in using AI code generation tools like GitHub Copilot, Codex, Claude Code, Cursor, etc., • Understanding of CI/CD and infrastructure automation., • Knowledgeable about integration patterns (sync/async, event-driven, pub-sub)., • 5+ years of Familiar with Agile and DevOps practices., • Strong communication and stakeholder management abilities. Preferred Qualifications: • Microsoft Certified: Azure Solutions Architect or Azure Developer Associate., • Demonstrated proficiency in secure design methodologies, including OAuth2, Azure Active Directory, Managed Identity, and Azure Machine Learning., • Insurance Domain knowledge or products used in that space.#LI-NorthAmerica #INDFSINS About NTT DATA NTT DATA is a $30 billion business and technology services leader, serving 75% of the Fortune Global 100. We are committed to accelerating client success and positively impacting society through responsible innovation. We are one of the world's leading AI and digital infrastructure providers, with unmatched capabilities in enterprise-scale AI, cloud, security, connectivity, data centers and application services. our consulting and Industry solutions help organizations and society move confidently and sustainably into the digital future. As a Global Top Employer, we have experts in more than 50 countries. We also offer clients access to a robust ecosystem of innovation centers as well as established and start-up partners. NTT DATA is a part of NTT Group, which invests over $3 billion each year in R&D. Whenever possible, we hire locally to NTT DATA offices or client sites. This ensures we can provide timely and effective support tailored to each client's needs. While many positions offer remote or hybrid work options, these arrangements are subject to change based on client requirements. For employees near an NTT DATA office or client site, in-office attendance may be required for meetings or events, depending on business needs. At NTT DATA, we are committed to staying flexible and meeting the evolving needs of both our clients and employees. NTT DATA recruiters will never ask for payment or banking information and will only use @nttdata.com and @talent.nttdataservices.com email addresses. If you are requested to provide payment or disclose banking information, please submit a contact us form, . NTT DATA endeavors to make accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at . This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. For Pay Transparency information, please click here.

Mentor junior and mid-level engineers in software development best practices and provide guidance in their design, implementation, and testing tasks. We are seeking a highly skilled Principal Software Engineer with extensive experience in Linux-based systems software design, security concepts, devel

Hamilton and Venus software), end-to-end assay automation workflows, and integrated automation systems. The Principal Engineer brings hands-on expertise in assay automation and possesses a strong technical background in automation design, development, and deployment within both GMP and non-GMP labs.

Experience leading web application development as a Senior Software Engineer.

Job DescriptionThis Jobot Job is hosted by: Christie Bauer Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: We are a growing electrical contractor looking for an experienced Electrical Design Engineer. Why join us? Benefits 401k PTO and more! Job Details Job Details: We are seeking a highly skilled and experienced Electrical Engineer to join our dynamic construction team. As an Electrical Engineer, you will be working on a variety of construction projects, designing and implementing complex electrical systems. This is a full-time, permanent position that offers an exciting opportunity for career growth and development in the construction industry. Responsibilities: • Design, develop, and supervise the installation of electrical equipment, components, or systems for commercial or residential construction projects., • Conduct detailed calculations to compute and establish manufacturing, construction or installation standards or specifications., • Prepare and study technical drawings, specifications of electrical systems, and topographical maps to ensure that installation and operations conform to standards and customer requirements., • Plan layout of electric power generating plants and distribution lines and stations., • Use computer-assisted engineering and design software and equipment to perform engineering tasks., • Collaborate with other engineers and construction personnel to ensure project completion by the specified deadline., • Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards., • Oversee project production efforts to assure projects are completed satisfactorily, on time and within budget., • Bachelor's degree in Electrical Engineering or a related field required., • Minimum of 5 years of experience in Electrical Engineering, within the construction industry., • Proficient in Revit/AutoCAD., • Understanding of electrical engineering codes and safety standards., • Problem-solving abilities., • Excellent communication skills, both verbal and written., • Strong organization and project management skills., • Ability to work on multiple projects simultaneously and prioritize tasks based on project needs., • In-depth knowledge of electrical systems design and the ability to design systems for commercial and residential buildings., • Basic understanding of mechanical systems and their interaction with electrical systems., • Professional Engineering (PE) certification is preferred. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description 2bridge has been engaged in the direct hire search for a Senior Full Stack Python Developer to join our Financial Client based near Colonia, NJ. They offer a comprehensive package including base, bonus, 401k, PTO, Medical, dental, and vision. Senior Software Engineer We seek several highly skilled Senior Software Engineers to join a dynamic team. In this role, you will design, develop, and maintain cutting-edge software solutions that drive business growth. Your expertise in full-stack development, cloud infrastructure, API integrations, and automation will be essential in delivering high-performance applications that scale efficiently. Key Responsibilities: Software Development & Deployment: • Design, develop, test, and deploy high-quality applications using Python, React, AWS, and modern scripting languages., • Implement scalable and maintainable software architectures that meet business requirements., • Utilize AWS services, including Lambda, DynamoDB, and cloud storage, to optimize application performance and scalability., • Ensure cost-effective and secure cloud-based application deployments., • Design and maintain RESTful and GraphQL APIs for seamless integration across various platforms., • Ensure APIs adhere to performance, security, and scalability standards., • Leverage TypeScript, JavaScript, and Python to build robust and efficient software solutions., • Design and optimize SQL queries and database architectures to support application needs., • Work closely with cross-functional teams, including product managers, QA engineers, and business stakeholders., • Participate in Agile/Scrum methodologies to drive project success., • Share expertise and mentor junior developers to foster a culture of technical excellence. Qualifications: • Bachelor's degree in Computer Science, Engineering, or a related field., • 6+ years of experience in software development and system architecture., • 6+ Experience building financial applications for wealth or portfolio management disciplines, trading, or financial applications., • Proficiency in React for building modern, responsive web applications., • Hands-on experience with AWS services (Lambda, DynamoDB, Redshift, cloud storage, etc.)., • Strong expertise in API development (REST, GraphQL, WSO2) and backend integration., • Advanced skills in TypeScript, JavaScript, and Python., • Experience in SQL development and optimization., • Knowledge of Agile/Scrum frameworks for managing and delivering projects., • Strong communication and problem-solving skills., • Preferred: Cloud certifications and experience in fintech, wealth management, or enterprise SaaS. Why Join our client? • Work on high-impact projects in a fast-paced, collaborative environment., • Be part of a team that values innovation, security, and scalable solutions., • Opportunities for career growth, professional development, and mentorship.

Job DescriptionSr. Software System Engineer Role Overview As a Sr. Software System Engineer, you will act as the bridge between data-center domain knowledge, user experience needs, and software architecture. You will research data center technologies, dissect complex concepts, design features, design UI/UX and write high-quality requirements that guide our development team. This role is ideal for someone who enjoys tinkering, reasoning through challenging problems, and understanding how things work end-to-end. Key Responsibilities • Understand deeply how our DCIM software system is architected and how components interact., • Contribute to solution design and feature architecture; identify and document thorough functional and non-functional requirements., • Design new requirements with all existing requirements in mind to avoid conflicts and spot unforeseen issues., • Think critically and logically to solve multidimensional and intricate problems., • Research new technologies, data-center equipment, and protocols to design new features or improve existing capabilities., • Translate complex engineering and data-center concepts into clear, actionable requirements for developers., • Work closely with product, UX/UI, and development teams to ensure features are logical, intuitive, and visually clean., • Create nearly pixel-perfect UI Mockups to ensure clarity, simplicity, and usability., • Understand the SQL database architecture such that proposed database changes maintain simplicity and performance., • Participate in troubleshooting, validating workflows, and improving system logic., • Support quality assurance by validating software behavior matches design intent.Required Skills & Qualifications, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Systems Engineering, or equivalent hands-on experience with data center power systems and software., • Strong understanding of data center infrastructure, including servers, networking, power distribution, PDUs, UPS systems, cooling, racks, and cabling., • Solid knowledge of electricity fundamentals, including three-phase power, power calculations, loads, redundancy concepts, and electrical efficiency., • Demonstrated understanding of how software is built — from technical architecture to APIs, data models, performance, and UI considerations., • Ability to think logically and reason through highly complex, multi-layered problems., • Curiosity-driven mindset: enjoys exploring “how things work” and learning new technologies., • Experience writing detailed, clear, and actionable technical requirements or documentation., • Strong collaboration and communication skills with cross-functional teams., • Eye for clean, intuitive UI/UX, even if not a designer.Preferred Qualifications, • Prior experience with DCIM, BMS, EMS, or related infrastructure software., • Hands-on experience with electrical systems, or data-center operations., • Familiarity with REST APIs, data modeling, and protocols such as SNMP, Redfish, Modbus, MQTT, etc., • Background in feature design, system architecture, technical product management, or solution engineering., • Basic understanding of SQL and can write simple queries, • We are all about delighting our clients and live/breathe the end client/user experience, • We stock the office with soda, snacks, coffee and tea for you to refuel throughout the day, • We have amazing PTO Policy that allows you to take care of yourself and your family, • We offer medical, dental, vision and life insurance to eligible employees, • We believe in collaboration, teamwork, creativity and taking initiativeInterested? Read on for additional details about this opportunity to join our amazing team! Powered by JazzHR HhGIAQRFVv

Job DescriptionDescriptionCME Associates is seeking a Traffic Engineer to join our team in East Brunswick, NJ. The ideal candidate will have expertise in traffic analysis, signal design, and transportation planning. Responsibilities • Traffic Analysis & Modeling: Conduct traffic impact studies, capacity analysis, and safety evaluations using industry-standard software., • Signal & Intersection Design: Design traffic signals, roadway signage, pavement markings, and intersection improvements following NJTA, NJDOT and MUTCD standards., • Transportation Planning & Studies: Develop traffic control plans, detour plans, and transportation management strategies for public and private sector projects., • Regulatory Compliance & Permitting: Prepare reports, design documents, and permit applications to ensure compliance with NJTA, NJDOT, MUTCD, AASHTO, and local transportation agencies., • Plan Development & Software Utilization: Prepare technical drawings and design plans using CAD software, with a preference for MicroStation. Qualifications • Education: Bachelor’s degree in Civil Engineering, Traffic Engineering, or a related field., • Licenses & Certifications: PE and PTOE required., • Experience: 4+ years of relevant experience in traffic engineering, including signal design, roadway safety analysis, and transportation planning., • Technical Skills: Proficiency in traffic analysis software (e.g., Synchro, HCS, VISSIM) and CAD software (MicroStation preferred)., • Regulatory Knowledge: Familiarity with NJTA, NJDOT, MUTCD, AASHTO, and local traffic engineering standards and guidelines. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Ranked the overall #9 Best Civil Engineering Firm (of any size) to Work for in the Nation and residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has 3-5 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionDescriptionCME Associates is seeking a highly motivated Water/Wastewater Engineer with 5+ years of experience to join our team in Parlin, NJ. The ideal candidate will play a key role in the planning, design, and implementation of water and wastewater infrastructure projects. This is an excellent opportunity to advance your engineering career with a collaborative and innovative team. Responsibilities • Project Design and Development: Prepare designs, technical specifications, and construction drawings for water distribution, wastewater collection systems, and treatment facilities., • Hydraulic Modeling and Analysis: Conduct hydraulic and hydrologic modeling to optimize system performance and capacity., • Regulatory Compliance: Ensure projects comply with local, state, and federal environmental regulations and permitting requirements., • Assist municipalities and utilities with meeting NJDEP compliance requirements related to drinking water and wastewater regulations, including permitting, reporting, and infrastructure planning., • Construction Support: Provide engineering support during construction, including reviewing submittals, responding to RFIs, and conducting site visits., • Collaboration and Communication: Work closely with multidisciplinary teams, including project managers, surveyors, and environmental scientists, to deliver high-quality solutions., • Maintain and develop strong client relationships by serving as a point of contact, understanding client goals and ensuring satisfaction throughout projects. Qualifications • Education: Bachelor’s degree in Civil, Mechanical, Environmental, or a related Engineering discipline., • Experience: Minimum of 5 years of experience in water/wastewater engineering, including design and project management., • Technical Skills: Proficiency in AutoCAD, Civil 3D, and hydraulic modeling software (e.g., EPANET, WaterCAD, SewerGEMS)., • Licensure: Professional Engineer (PE) license required., • Communication: Strong written and verbal communication skills, with the ability to prepare technical reports and presentations. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionDescription: We are actively seeking a highly skilled Mechanical Designer with a specialization in deep drawn metal stamping to join our innovative engineering team. This position requires a detail-oriented engineer with a comprehensive understanding of product design and advanced manufacturing processes, specifically in high-precision metal forming techniques. Requirements: Key Responsibilities: Design, develop, and optimize tooling and fixtures for deep drawn metal stamping processes. Ensure these designs facilitate maximum productivity, efficiency, and quality throughout the manufacturing workflow. Work closely with multidisciplinary teams, including production, quality assurance, research and development, and supply chain management, to develop creative and practical solutions to complex manufacturing challenges. Utilize advanced CAD software tools (such as SolidWorks, AutoCAD, or CATIA) to create detailed 2D and 3D models. Generate comprehensive engineering drawings conforming to industry standards to facilitate clear communication of design intent. Conduct thorough feasibility analyses and computer simulations to evaluate design concepts, optimize deep drawing processes, and anticipate potential manufacturing issues prior to production. Select appropriate materials and establish manufacturing processes and tolerances that align with design specifications, regulatory standards, and customer requirements, ensuring high-quality deliverables. Perform detailed root cause analysis on production anomalies and implement effective corrective actions, utilizing methodologies such as 5 Whys, Fishbone Diagrams, or Failure Mode and Effects Analysis (FMEA) to enhance process reliability. Oversee the prototyping phase, developing initial models for testing. Analyze test results rigorously and make iterative adjustments to designs based on empirical data and feedback from production teams to refine product performance. Actively participate in continuous improvement initiatives, employing Lean Manufacturing principles and Six Sigma methodologies to enhance process efficiencies, reduce waste, and lower production costs. Maintain meticulous documentation of design processes, modifications, and specifications. Ensure all design changes are accurately recorded and communicated to relevant stakeholders for future reference. Qualifications: · Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or a related engineering discipline. · Minimum of 5 years of experience in mechanical design and engineering within deep drawn metal stamping, ideally in high-volume manufacturing environments such as automotive, aerospace, or industrial machinery sectors. · Advanced proficiency in CAD software and familiarity with simulation tools for finite element analysis (FEA) and computational fluid dynamics (CFD). · Strong understanding of metallurgy, metal forming mechanics, and manufacturing processes, including deep drawing, stamping, and machining. · Exceptional problem-solving skills, with a systematic approach to troubleshooting and overcoming design and manufacturing challenges. · Excellent verbal and written communication skills, enabling clear dialogue with team members, suppliers, and customers to ensure alignment and project success. · Project Management Experience: Proven experience in project management, with the ability to lead and manage multiple design projects simultaneously from conception through to production. · Lean and Six Sigma Knowledge: Certification or demonstrable knowledge of Lean Manufacturing principles and Six Sigma methodologies to foster a culture of continuous improvement. Benefits: • Competitive salary with performance-linked bonuses., • Comprehensive health, dental, and vision benefits package., • 401(k) retirement plan with company matching contributions., • Opportunities for professional development and career advancement within a growing organization. Work Environment: This position will primarily be based in an office setting, with occasional travel required to visit clients, attend industry events, and engage with production facilities. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. We are seeking a service-oriented SCADA Services Engineer with strong problem-solving abilities, excellent customer-facing skills, and proven hands-on experience supporting, maintaining, troubleshooting, and upgrading Supervisory Control and Data Acquisition (SCADA) systems and their underlying PLCs and control panels. In this role you will be the go-to technical expert for a diverse installed base of SCADA systems including Inductive Automation (Ignition), Rockwell Automation (FactoryTalk), Wonderware, iFix, VTSCADA and Allen-Bradley PLC platforms. Day-to-day responsibilities include remote and on-site troubleshooting, break/fix support, system optimization, patch management, and implementing upgrades and enhancements on existing systems across projects of varying size and complexity. This is a customer-facing, service-focused position that requires a proactive mindset: anticipating issues before they escalate, resolving problems efficiently, and maximizing system uptime and performance while making the best use of available resources. You will regularly interact with end-users, plant operators, and internal teams to diagnose issues, explain technical concepts clearly, and deliver sustainable solutions. Who are we looking for: The successful candidate will join a strong team of motivated professionals who provide ongoing support and lifecycle services for municipal and industrial water and wastewater clients. You will be the primary technical resource for service contracts, maintenance agreements, and post-implementation support of medium to large SCADA installations (both standalone and multidisciplinary systems). Strong communication skills are essential, as you will interface daily with operators, plant managers, IT/OT teams, and other stakeholders. Ideal candidates are eager to deepen their expertise in supported platforms and expand into related areas such as industrial networking and OT cybersecurity. Offering Flexible Remote/Hybrid Work/Onsite Schedule: Hybrid work schedule (consisting of office, remote, and onsite, pending project needs) Travel & Physical Requirements: This position involves regular travel to client facilities (typically within driving distance) for on-site troubleshooting, preventive maintenance, system upgrades, emergency response, and scheduled service visits. Regional travel up to 50–70% (mostly day trips), with occasional overnight stays required depending on call-out needs and multi-day service work. • Must be physically able to lift and carry 40 lbs repeatedly - Comfortable working from heights (ladders, scissor lifts, platforms) and in confined spaces - Able to safely work on live control panels while wearing proper arc flash PPE and following NFPA 70E protocols - Candidate must maintain a valid driver’s license with no major infractions - Candidate must maintain a valid REAL ID driver’s license or other TSA-approved identificationWhat you will be doing at Woodard & Curran: • Rapidly diagnose and resolve SCADA, HMI, historian, PLC, network, and process-control-related issues in live production environments at municipal and industrial water/wastewater facilities, • Perform on-site and remote troubleshooting of SCADA communications, control system faults, instrumentation, and automation problems, • Maintain, repair, and support existing Control Panels, PLCs (primarily Allen-Bradley), SCADA servers, workstations, and associated infrastructure, • Support and execute field upgrades, migrations, expansions, minor updates, patches, and fixes on live systems while minimizing plant downtime, • Perform routine system health checks, backups, disaster recovery testing, cybersecurity updates, and preventive maintenance activities, • Remotely monitor SCADA assets and infrastructure across multiple facilities to proactively identify service degradation, maintenance needs, or potential failures, • Manage SCADA user accounts, permissions, access controls, and security settings in compliance with client and cybersecurity requirements, • Respond to emergency situations, provide 24/7 on-call support (rotational), and participate in rapid-response fieldwork when required, • Thoroughly document all work including service tickets, root-cause analysis reports, as-built drawings, infrastructure inventories, and system changes, • Collaborate closely with Operations, Maintenance, Engineering, Administrative teams, project engineers, technical managers, and account managers to ensure long-term system reliability and client satisfaction, • Work within defined service-level agreements (SLAs), maintenance contracts, budgets, and schedules, • Ability to work remotely from home or local facility while maintaining high availability for remote support and occasional site visitsWhat you will need to succeed:, • Minimum of 5 years of experience in Control System Design, PLC Programming, and SCADA Development, • Experience with Ethernet IP and network switches., • Skilled in modifying HMIs and tuning PID loops., • Strong understanding of industrial power design (medium/low voltage)., • Ability to read and interpret P&IDs and wiring diagrams., • Experience installing and maintaining electrical components and systems., • Knowledge of safety protocols and hazard recognition., • Experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus)., • Experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus)., • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More., • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry., • Associate or Bachelor’s degree in a related field is preferred., • Strong electrical and mechanical aptitude., • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint)., • Computer networking experience (hardware and configuration) is a bonus, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus. Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: Minimum - $100,000 annual Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description An electrical engineer participates with the electrical engineering team in electrical systems design and assists in the development of electrical systems drawings and documentation. Evaluates recent technical developments in product design to work towards an energy efficient, reliable and cost effective design. Assists with short circuit studies to illustrate the integrity of the distribution system design. Responsibilities: · Develop and coordinate the design and development of electrical and fire alarm systems and the required drawings and documentation · Performs Electrical design calculations. · Performs Short Circuit & Coordination & Arc Flash Studies (which includes site surveys, developing the one line, entering the one line into the program, analyzing the information, developing coordination curves and preparing the report). · Coordinates with other disciplines and the design team to develop a fully coordinated design · Attends project meetings to ensure schedule and deliverables are met. · Performs site surveys to collected pre-existing conditions information. Qualifications & Required Skills: · BS in Electrical Engineering or equivalent work experience · 0-5 years of experience · Proficient with AutoCAD and Microsoft Office Suite products - SKM software a plus · Knowledge of basic electrical engineering · Ability to work on multiple projects at once, manage their work load, communicate with team members · Working knowledge of power systems · 15% travel is required Company DescriptionKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection,\r\nPlumbing, Sustainable Design, and Commissioning of critical facilities.\r\nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\r\nPlease submit your resumes to

Job Description The Design Engineer II manages the development and design of complex tools, fixtures and other devices used for production based on engineering specifications. The Design Engineer II is expected to: · Complete projects on time and on budget per customer specifications · Create innovative designs and standards to reduce design time and costs Tool Design Engineering 60% · Supports the activities of assigned departmental Tool Makers in their efforts to develop and debug new and existing tooling designs in support of customer requirements. · Determines tool specifications and requirements by interfacing with manufacturing staff to determine the best design for the tool. · Determines the sequence of operation & number of die stations for progressive cutting, punching and forming to ensure products are produced economically and accurately. · Performs calculations to determine exact dimensions, materials required and cost of the tools. Generates assembly & detail drawings of components required for the fabrication of inspection, assembly, custom automation, power press & four-slide tooling · Resolves a wide variety of manufacturing problems including material characteristics tolerance and process issues, tolling failure issues and process variation issues · Develops flat blank & strip layout drawings for stamping manufacturing process & analysis · Selects standard MSC die components during design to allow efficient low cost concurrent tool mfg · Designs automated machinery to perform various metal forming operations · Designs tooling for a wide variety machine types to be used in the manufacturing environment. Project Management 15% · Assigns and tracks departmental resources needed to support customer-driven projects and new product engineering schedules. · Monitors design engineering project work to ensure all customer requirements for quality, cost and lead time are met appropriately. · Provides timely cost estimates to the Sales and Marketing Group ensuring that the total tooling cost needed to support the customer’s requirements are fully considered and supported · Generates bill of material to identify all components of a design to facilitate manufacturing · Coordinates ordering of tooling components to meet quoted cost & delivery · Works with tooling group, process engineers and outside suppliers to effectively complete projects on time and on budget. · Assists in facilitating the procurement of new equipment. · Develops robust repeatable manufacturing processes that meets all the project requirements. · Captures all process variables to assure a stable process in production. · Assures all documentation is 100% accurate. Creates, develops and recommends improvements to the departments design process. Process Improvement 25% · Works with engineering to identify problems with performance or tool life and recommends solutions or enhancements. · Implements systems that significantly reduces design time and improves accuracy of design output and meets expected deliveries and cost requirements · Standardizes design processes company-wide, maintains updated design standards within the department, and trains departmental engineers on those standards · Implement and execute continuous improvement techniques, as measured against delivery, cost and quality requirements · Measure, Oversee and reduce the cost and time spent in tooling development (both in-house and outside at approved tooling vendors) This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · 4 - 7 years of experience in the maintenance, repair and construction of progressive and compound dies, tools, jigs and fixtures is required. · Must have a thorough and complete knowledge of manufacturing processes understanding feeds, presses and other auxiliary equipment used in production · Must have a thorough knowledge of machine tool construction and operations and the use of tools, machine shop practices, and the working qualities of materials. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Blueprint reading · Geometric Dimensioning and Tolerancing (GD&T) · Statistical Process Control (SPC) · Measurement Systems Analysis (MSA, GR&R) · Design of Experiments (DOE) · CAD/CAM · ERP software · SolidWorks design software · Statistical analysis software (MiniTab) · MS Office Suite OTHER SKILLS · Written communication · Verbal communication · Multitasking · Problem solving · Organizational skills While performing the duties of this Job, the employee is regularly required to sit and talk or hear. The employee is frequently required to stand; walk; use hands to touch, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 10 pounds. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate.

Job DescriptionPMA is seeking a seasoned Project Cost Engineer to join our team and lead cost management across multiple construction projects for one of our largest, long-term clients in New Jersey. The Project Cost Engineer will oversee cost analysis, forecasting, and reporting, while designing and implementing effective cost control strategies. This role involves close collaboration with project stakeholders and the delivery of actionable insights to support informed decision-making. As a subject matter expert, the Project Cost Engineer will play a pivotal role in standardizing cost practices and ensuring that financial performance consistently aligns with project goals.Organizational Responsibilities • Leads and implements standardized cost control procedures, tools, and documentation., • Prepares and presents project budgets, cost reports, and earned value analyses, identifying variances and trends., • Analyzes and reconciles labor, material, and accrual costs, coordinating with procurement and vendors to support forecasting and risk management., • Collaborates with project teams and executives to ensure budget adherence, provides financial insights, and advises on cost implications during design and construction., • Contributes to implementation of cost control best practices and standards., • Other duties as assigned.Position Qualifications, • Bachelor’s degree in engineering, construction management, finance, or a related field required., • 5+ years of relevant cost engineering or cost controls experience., • Demonstrated experience with project cost forecasting, budget reporting, and financial analysis., • Proficiency in SAP, ARIBA, or similar project finance software., • Strong Microsoft Office skills with advanced Excel experience., • Excellent communication and presentation skills., • CCP or PMP certification a plus. The salary range for this position is $112,650 to $130,210.A hired employee will be placed within this salary range based on a variety of legitimate business reasons, including but not limited to the individual’s scope of relevant experience and geographic location.Additional Requirements Physical: Standing or sitting for long periods; must be able to lift up to 15 pounds at times and spend extended hours in front of a computer screen. Cognitive: Problem-solving, written, and verbal communication skills; computer and software skills; and ability to read and interpret text online or in printed form. About PMA At PMA, employee well-being is a daily priority. We offer a combination of workplace options that include a PMA office location; work-from-home; or a client site. Wherever we work, we openly share knowledge as we believe that collaboration with peers improves our work product and that pursuing subject matter expertise is a lifelong endeavor. We are committed to a culture of equity, diversity, and inclusion. We affirm and respect diverse backgrounds and opinions because we believe they yield the best solutions for our clients. We promote emotional intelligence and trust by nurturing these values within our new hires. We encourage staff to develop rewarding, long-term careers at PMA, and we implement formal leadership development programs that help you attain your goals. At PMA, shared success is a core value. Every employee who contributes is recognized, celebrated, and rewarded. We look for self-driven candidates eager to assume responsibility and join a community of respect founded on collaboration and accountability, not titles. If you aim to transform the project management practice toward continuous improvement of project outcomes, the profession, and yourself, PMA looks forward to warmly welcoming you to our team. We offer competitive pay and benefits, wellness programs for you and your family, and career development opportunities to advance your professional goals. As a PMA professional, you will be empowered to make timely and effective decisions and significant daily contributions to complex facets of project delivery. Join a team that has achieved a world-class reputation in the construction industry and has been voted a “Best Place to Work.” PMA offers competitive wages and comprehensive benefits, including medical, prescription, dental, vision, time off with pay, 401(k) with company match, life, disability, and professional development reimbursement for qualifying employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, gender identity, or gender expression), disability, national origin, or any other characteristic protected by applicable laws, regulations, and ordinances. Qualified female and minority applicants are encouraged to apply. EOE, including persons with disabilities and veterans. VEVRAA federal contractor.

Job Description Hiring Company Overview Tri-State Light & Energy (TSLE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSLE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSLE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSLE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Section Title: Job Description Job Description We are seeking a dedicated and detail-oriented Energy Engineer to join our team in New Brunswick, New Jersey. The ideal candidate will be responsible for conducting energy audits, data collection and entry, feasibility studies, engineering assessments, and providing program-related support activities. This crucial role also involves conducting on-site inspections, design support, reviewing technical documents, and participating in construction management. The Energy Engineer will play a vital role in ensuring our projects realize their energy savings and meet all regulatory standards. Section Title: Job Responsibilities Job Responsibilities • Perform onsite inspections, including detailed data collection and performance testing., • Prepare site investigation, preliminary design, and due diligence reports, including review of ordinances, utility service research, outside agency regulations, and onsite visits to establish comprehensive development guidelines., • Provide thorough education to end users regarding energy efficiency; field and answer related questions., • As a subject matter expert, be responsible for project coordination with the client, other consultants, contractors, and the project team to prepare a comprehensive site plan application., • Ensure technical aspects of work are performed following applicable regulations or project plans., • Investigate problems in construction or renovation projects., • Provide technical assistance to customers, contractors, and other stakeholders, including support with energy savings calculations and meeting program requirements., • Support and promote relationships with industry and solution partners to maximize project implementation, promote efficiency, and educate customers while sustaining a robust program pipeline., • Prepare written correspondence to outside agencies, clients, contractors, etc., • Perform site visits to verify the appropriate installation of recommended measures., • Monitor new products and technologies related to this industry for ongoing and future projects., • Stay informed about energy issues and industry trends through regular technical reading and participation in local and national professional organizations., • Provide thorough education to end users regarding energy efficiency, field and answer related questions., • Perform other duties as assigned. Section Title: Qualifications Qualifications Bachelor’s or master’s in engineering (Mechanical, Electrical, Energy). Other engineering disciplines will be considered. • Demonstrated interest in energy efficiency is must., • A minimum of 1 year of relevant engineering or fieldwork experience required; 2 to 5 years are preferred., • Must reside in New Jersey., • Demonstrated knowledge of Lighting and Lighting Controls, HVAC Equipment, Building Management System (BMS) and Building Envelope Components., • Demonstrated experience with energy codes and standards (IECC, ASHRAE, etc.) and Energy Star components., • Knowledge of ASHRAE level energy auditing, • Must be able to lead and perform on-site and virtual audits and customer site visits in various environments, including commercial, industrial, school, and government facilities., • Strong project management skills with the ability to set priorities, collect and document project requirements, successfully handle multiple projects simultaneously, and meet deadlines in a fast-paced environment., • Ability to maintain and operate personal and/or company vehicles with a valid driver’s license., • Must be willing and able to travel within the tri-state area; some overnight travel may be required., • Strong customer service capability focusing on proactively identifying customer needs and managing customer expectations., • Excellent written and verbal communication skills., • Self-starter who can work independently or within a team environment., • Exceptional organizational, time-management, and planning skills. Section Title: Professional Skills Professional Skills • Familiar with the use of AutoCAD to assist in the production of site plan drawings., • Knowledge of eQuest, EnergyPlus or Open Studio software is a plus., • Proficient in using Microsoft Software including Word, Excel, Outlook, and Project and other management software. Section Title: Physical Abilities Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Section Title: Work Environment Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Section Title: Equal Employment Opportunity (EEO) Equal Employment Opportunity (EEO) TSLE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSLE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSLE makes hiring decisions based solely on qualifications, merit, and business needs at the time. Please read through our EEO Policy for more information. TSLE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSLE is a drug-free workplace. Section Title: Screening Screening TSLE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Section Title: Benefits Benefits • Medical, vision, and dental insurance., • 401(k) and company match after 1st year anniversary., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays. Section Title: Work Schedule Work Schedule • Monday through Friday, 8:00 a.m. to 5:00 p.m., • 40-hour work week., • Occasional weekends., • On-call requirement. Section Title: Compensation Compensation • Salary Range: Minimum $85K + commensurate with experience.

Job Description The role defines, implements, and maintains the networking, unified communications, and cloud networking infrastructure of the IEEE. It utilizes network knowledge, skills, and expertise to protect the integrity, confidentiality, and availability of IEEE information systems. This position provides leadership and focus for the architecture, integration, development, and support of the IEEE voice, video, data, and cloud network environment. It also focuses on automating network provisioning and management, and serves as the subject matter expert for layers 1-5 of the OSI model. The Lead Network Engineer works in concert with the Manager, Network and Unified Communications to establish rigorous and dynamic infrastructure. In addition, the Lead Network Engineer shall maintain critical network technology and information, which assists in providing rapid response to network, cloud networking, and security-related issues. The position is part of the Networking and Unified Communications team that supports data communications, voice/telephony, video conferencing, Internet access, and cloud networking, as well as management, automation, and security for these platforms. This role reports to the Manager, Network and Unified Communications, and, under the manager's direction, provides direction, advice, consultation, and mentoring to other members of the Network and Unified Communications team and peers, as needed. Key Responsibilities • Deep hands-on experience with: Cisco ACI, Cisco ASA/FTD, Cisco IOS, SD-WAN technologies., • Experience with: Unified communications platforms (Webex, SIP, VoIP)., • Responsible for evaluations, designing, planning, and project management for networks and telecommunications systems and services., • Evaluates, plans, recommends and implements voice and Enterprise Network (LAN/WAN) systems and services., • Evaluates response time, utilization, and error data and provides traffic analyses, capacity planning, and network/system designs as required., • Collaborate on the development of network strategies, philosophy, direction, planning, etc., • Recommend and develop monitoring policies, procedures, maintenance, standards, performance metrics, and specifications relating to network system management., • Leads the Installation, configuration, and support of the network and telecommunications infrastructure., • Evaluates new technologies and products., • Implements network and telecommunications management tools and solutions., • Provides guidance, work direction, and information to other technical network employees, as needed., • Design, implement, and manage cloud network architectures (e.g., VPCs, VPNs, Direct Connects, Transit Gateways) in AWS and other cloud environments (Azure, GCP, OCI)., • Ensure secure hybrid connectivity between on-premises and cloud infrastructure., • Develop and maintain Infrastructure as Code (IaC) using Terraform for repeatable, reliable cloud and network deployments., • Create and manage automation frameworks and scripts (e.g., Python, Ansible, Terraform) to streamline provisioning, configuration, and monitoring., • Designs, implements, and supports core network services such as VPN, DNS, and DHCP., • Contributes to the development and evolution of the overall network strategy, including technology roadmaps and architectural standards., • Proficient at supporting F5 BIG-IP (LTM, GTM, iRules, SSL/TLS)., • Accountable for participating in a structured rotating on-call schedule to provide after-hours operational support. Serves as the designated escalation point for Level 3 incidents, ensuring timely triage, root cause analysis, and resolution of complex infrastructure and application issues. Travel Information • Less than 10% Domestic travel to remote offices on an as-needed basis. Education • Bachelor's degree or equivalent experience Computer Science, Electrical Engineering or other related area Req, • Master's or other advanced degree Pref Work Experience • 10-15 years direct experience involving network architectures, network security, network communications protocols, network monitoring and intrusion prevention strategies Req, • 7-10 years hands-on experience implementing and managing enterprise IP voice and video communications services Req, • 7-10 years Demonstrated experience in installation, maintenance and support of network and telecommunications technologies. Req Skills and Requirements • Knowledge of an enterprise-computing environment., • Knowledge of routers, switches, and SD-WAN., • Knowledge of network troubleshooting techniques and network quality of service (QoS)., • Knowledge of distributed processing operations, procedures, and equipment., • Knowledge of WAN/LAN and SAN protocols including topologies, • Knowledge of VPN technologies and telephony/voice networks, • Knowledge of TCP/IP and VoIP, • Strong knowledge of network security best practices including design and implementation, • Strong knowledge of cloud networking architecture (AWS, OCI, GCP), • Knowledge of Internet Architectures such as BGP., • Knowledge of DNS and DHCP services, • Knowledge of support technologies such as F5 GTM and AWS Route53, and F5 LTM, • Knowledge of common scripting and API interface languages as it relates to interoperability, • Knowledge of computers and software., • Ability to analyze packet captures to identify and resolve communication issues, • Ability to apply principles of logical or scientific thinking., • Ability to define problems, collect data, establish facts, and draw valid conclusions and deal with problems involving several abstract and concrete variables., • Ability to design and evolve viable network and security solutions for the envisioned world-wide IEEE technical infrastructure, • Strong project management skills, • Capable of handling complex changes and support of these systems and while maintaining security in a real-time environment, • Ability to solve problems with little or no assistance and be motivated/capable of handling the problem until resolved within accepted time tolerances, • Must be self-motivated, enthusiastic and must possess a self-directed work style, • Professionalism in business dealings is a must (particularly when challenged); Must be able to handle pressure, remain objective and be diplomatic, • Must possess good communications and writing skills that will assist with the delivery and presentation of information to peers, staff, groups and leaders in the organization. Other Requirements: As defined in IEEE Policies, individuals currently serving on an IEEE board or committee are not eligible to apply. PLEASE NOTE: This position is not budgeted for employer-sponsored immigration support, this includes all persons in F (both CPT and OPT), J, H, L, or O status. For information on work demands and conditions required for this position, please consult the reference document, ADA Requirements. This position is classified under Category I - Office Positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Disclaimer: This job description is proprietary to IEEE. It outlines the general nature and key features performed by various positions that share the same job classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties and qualifications required of all employees assigned to the job. Nothing in this job description restricts management’s right to assign or re-assign duties to this job at any time due to reasonable accommodations or other business reasons. Company DescriptionAdvancing Technology for Humanity IEEE and its members inspire a global community through highly-cited publications, conferences, technology standards, and professional and educational activities.Advancing Technology for Humanity\r\nIEEE and its members inspire a global community through highly-cited publications, conferences, technology standards, and professional and educational activities.

Job Description Position Overview Harris Energy Solutions (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, and Building Retro-Commissioning. We pride ourselves in the work we perform and the services we provide. HES is hiring a Senior Energy Engineer with proven proficiency in Energy Audits & Commissioning work to join our team. Proficiency in Energy Audits & Commissioning work is a mandatory requirement for this role. Candidates without direct Energy Audits & Commissioning work experience will not be considered. Responsibilities • Energy Modeling, • Lead the development and implementation of advanced energy models to support forecasting, scenario analysis, and energy market strategies., • Oversee the modeling team, ensuring accuracy, efficiency, and alignment with company goals., • Collaborate with cross-functional teams to integrate modeling insights into broader company initiatives., • Perform drawing reviews to identify applicable building components, • Compile data for inputs into building energy modeling software, • Execute building modeling, • Perform ASHRAE Level I/II/III Energy Audits, • Analyze utility bills and drawings to identify building energy consumption, • Conduct onsite energy audits of complex building systems, • Identify Energy Conservation Measures, • Perform energy savings and cost analyses for projects, • Generate a technical report for deliverables to clients, • Proficiency in Energy Audits & Commissioning work is required. Candidates without demonstrated experience in Energy Audits & Commissioning work will not be considered., • A valid Professional Engineer (PE) license, • Bachelor's degree in Engineering (Mechanical, Electrical, or Facilities), • 6 years of experience in the Energy Engineering field, • Experience with building energy modeling techniques, • Proficient in Microsoft Office, • Understanding of energy efficiency technologies, HVAC systems, and renewable systems, • Experience with large commercial and multi-family buildings, • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and without a team environment Pay: $100,000.00 - $120,000.00 per year Benefits: • 401(k) (Tradtional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance 8 hour shift Work Location: Piscataway, NJ (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description We are seeking a hands-on Platform Architect to drive the design and build-out of a modern insurance platform leveraging InsureMO, Unqork, and cloud-native APIs and front ends. This role is central to enabling Fortegra's specialty program business models—spanning underwriting, program launches, policy administration, billing, financials, and claims administration. Unlike a traditional enterprise architect, this position requires deep technical engagement: designing domain services, building reference implementations, orchestrating event-driven integrations, and collaborating directly with engineering teams. The ideal candidate understands how to define, communicate, and guide architectural vision at the executive and individual engineer level. Key Responsibilities: Platform Architecture & Design • Lead the decomposition of disparate, siloed applications into a modular, composable architecture that enables reuse, accelerates delivery, and supports rapid program evolution., • Define architectural vision and roadmap to reach the target-state composable architecture and guide module design decisions., • Dive deep into the architecture and best practices for InsureMO’s middle-office platform and Unqork's no-code platform. Partner with vendor solution architects to align to target-state design., • Develop architectural patterns, blueprints, and templates for Azure cloud-native front-ends and microservices., • Partner with delivery teams to ensure API contracts, data models, event schemas, and integration patterns align with long-term platform strategy., • Build prototypes, reference solutions, and foundational libraries used across teams., • Partner closely with development teams implementing services, Unqork modules, and cloud-native front ends., • Evaluate and optimize InsureMO configurations, including product definitions, BO APIs, event consumption, and orchestration., • Guide decomposition of legacy workflows into modular, API-first processes., • Provide architectural direction for cloud configuration, CI/CD automation, scalability, observability, and performance tuning., • Translate specialty program business requirements— underwriting rules, client self-service, bordereaux processing, financials, compliance, reinsurance structures—into scalable technical architecture., • Enable rapid deployment of new program products via InsureMO product configuration and Unqork’s no-code capabilities., • Ensure seamless data exchange and workflow execution between partners such as MGAs, TPAs, reinsurers, and distribution channels., • Work with underwriting, product, operations, and actuarial partners to ensure platform capabilities meet business objectives., • Partner with Data Engineering, Data Science, Security, DevOps, and Cloud Infrastructure teams to ensure security, resiliency, compliance, and observability., • Communicate architectural decisions and tradeoffs clearly to both technical and business audiences. Required Qualifications: • 8+ years of hands-on software engineering/architecture experience., • Strong communication skills and the ability to work hands-on with engineering teams., • Strong experience with event-driven architectures, microservices, and distributed systems., • Hands-on expertise with cloud platforms, • Proficiency with modern development languages (.NET Core, Node.js, Python)., • Understanding of insurance or financial systems—preferably specialty, program, or commercial lines., • Experience integrating or architecting solutions around InsureMO (or similar middle-office platforms)., • Experience building workflows or applications using Unqork or comparable no/low-code frameworks., • Familiarity with event sourcing, CQRS, DDD, and real-time event streaming., • Understanding of specialty program operational flows—submissions, endorsements, premium reporting, bordereaux, TPA integration, etc. Fortegra will never request financial or sensitive information such as your bank account information, social security number, or other non-publicly available information for any purpose during the application and interview process. All official communications from our Talent Acquisition team will come from our email domain address “@fortegra.com”. If you receive a suspicious message, unsolicited job offer or would like to verify the legitimacy of any communication about a position, please contact our Human Resources department at . The anticipated salary for this position is $160,000 - $190,000 per year, based on qualifications and experience.

Job DescriptionDescriptionCME Associates is seeking a Municipal Engineer to join our dynamic team in East Brunswick, NJ. As a Municipal Engineer, you will play a crucial role in the planning, design, and execution of engineering projects. You will work closely with senior engineers and project managers to ensure the successful completion of projects. If you are a highly motivated and detail-oriented engineer with a passion for problem-solving, we want to hear from you. Responsibilities • Project Support: Collaborate with senior engineers to assist in the planning and execution of engineering projects, including site assessments, feasibility studies, and design development., • Design and Analysis: Perform engineering calculations, simulations, and analyses to develop comprehensive design solutions. Ensure designs comply with industry standards and regulations., • Documentation: Prepare detailed engineering drawings, reports, and technical documentation to support project deliverables and client communication., • Quality Control: Conduct thorough quality checks on engineering designs and reports to maintain the highest standards of accuracy and compliance with client requirements., • Client Interaction: Communicate effectively with clients, contractors, and regulatory agencies to address project-related inquiries, provide updates, and facilitate project approvals. Qualifications • Bachelor's Degree: Bachelor's degree in Civil Engineering or a related field from an accredited institution., • Professional Engineer (PE) License: Must hold a valid Professional Engineer license in the state of New Jersey or the ability to obtain it within 6 months of hire., • Experience: A minimum of 3-5 years of civil engineering experience, preferably in site development, land planning, or transportation projects., • Software Proficiency: Proficient in AutoCAD, Civil 3D, and other relevant engineering software. Experience with hydraulic and hydrologic modeling software is a plus., • Communication Skills: Strong verbal and written communication skills, including the ability to convey complex technical information to clients and team members effectively. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Senior Controls Engineer – Machine Control & SCADA Somerset, NJ| Full-Time | ✈ ~20% Travel Are you a hands-on controls engineer who loves making high-speed machines run smarter, faster, and more reliably? We’re looking for a Senior Controls Engineer to own development and support of machine control systems for high-speed sorters, with additional work in packaging, palletizing/robotics, and material handling systems. What You’ll Do • Design, program, and maintain PLC-based machine control systems (high-speed sortation + packaging/palletizing)., • Lead development and enhancement of core control technologies, including documentation and training., • Program and commission Allen-Bradley and Siemens PLCs; prepare, test, and troubleshoot PLC hardware., • Develop and integrate SCADA systems, especially using Ignition by Inductive Automation., • Turn customer requirements and electrical drawings into robust control logic and system architectures., • Collaborate with R&D, engineering, PM, sales, and customer service teams globally., • Bachelor’s or Master’s in Controls Engineering or related field (or equivalent experience)., • 10+ years of relevant experience in machine control / industrial automation., • Deep expertise in Allen-Bradley and Siemens PLCs; experience with other PLCs is a plus., • Strong background in advanced control concepts and applied math for controls., • Proven experience with SCADA development, ideally Ignition (design, implementation, maintenance)., • Able to independently tackle complex controls challenges and own solutions from concept through commissioning.

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role: Building Envelope Project Engineer (Structural) – PE or EIT Location: Warren, NJ SUMMARY We are seeking a motivated Building Envelope Project Engineer (Structural) with a strong interest in investigation, repair, and rehabilitation of existing buildings. The position focuses on roofing, façade, structural, and balcony/deck rehabilitation projects, primarily within the multifamily sector. The engineer will provide technical evaluations, structural & envelope assessments, design support, and construction-phase engineering oversight. Depending on experience, candidates may assist in investigation, design development, structural/envelope detailing, report writing, and construction administration. Primary Responsibilities General Engineering / Project Support • Perform engineering evaluations of building envelope and structural systems, including roofs, façade components, balconies, decks, and related structural elements., • Prepare technical reports summarizing existing conditions and recommended repair strategies., • Assist with development of repair drawings, details, and specifications, with oversight from senior engineers., • Prepare written correspondence to clients, contractors, and code officials., • Manage and maintain organized technical records, drawings, test data, field photos, and project documentation., • Review project scopes, budgets, and schedules with supervising engineers to ensure deliverables are met., • Assist in construction administration activities—including reviewing RFIs, submittals, change orders, and contractor payment applications.Participate in internal QA/QC reviews to ensure accuracy and technical completeness., • Review contractor submittals, change orders, schedules, and payment applications as directed., • Conduct on-site engineering evaluations of roofs, façades, balconies, decks, structural framing, waterproofing systems, and building envelope components., • Perform field testing and documentation (moisture testing, probes, level checks, structural observations, etc.)., • Prepare detailed field sketches, measurements, and photographic documentation., • Observe repair work in progress to verify compliance with drawings, specifications, and industry standards., • Communicate observed deficiencies and corrective recommendations to senior engineers and project managers., • Attend client meetings with senior personnel, document meeting minutes and follow-up items., • Participate in discussions on scope, budget, and technical approach. Qualifications Licenses & Certifications • Entry Level PE (Structural) strongly preferred., • Additional Ideal candidates are actively pursuing Professional Engineer (PE)(Structural) licensure., • Building envelope certifications (IIBEC: RRO, RRC, RWC) or ICC certifications are a plus., • OSHA-10 preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Experience, • Bachelor’s degree in Civil Engineering, Structural Engineering, Architectural Engineering, or related field., • Understanding of construction plans, technical specifications, and industry standards., • Ability to identify typical structural defects, building envelope failures, moisture intrusion mechanisms, and waterproofing deficiencies., • Strong technical writing skills and attention to detail., • Ability to manage multiple projects concurrently and meet deadlines., • Knowledge of building codes, including IBC, IRC, and structural standards., • Professional, organized, and capable of fieldwork including ladders, attics, roofs, and difficult access areas., • Ability to work independently and collaboratively with engineers, architects, and construction professionals., • Familiarity with AutoCAD or similar drafting software is a plus. Physical Demands • Ability to lift up to 40 lbs., • Comfortable using ladders, lifts, scaffolds, and roof access equipment., • Ability to perform site work in extreme temperatures, humidity, and adverse weather., • Ability to work at heights up to 10 stories and in confined spaces (attics, crawlspaces)., • Significant standing/walking on uneven or challenging terrain. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include Group Medical, Dental and Vision, 401k with employer match, Supplemental Life Insurance, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans, Paid Holidays, Vacation, Sick time, Cell Phone Reimbursement and Continuing Education Powered by JazzHR 3zS2GNNw0S

Job DescriptionSalary: $70k-85k Position Overview The Field Engineer is a critical member of our growing Engineering department at GRA Design Studio, responsible for performing detailed on-site investigations that support project feasibility, engineering decisions, and design development. This role focuses primarily on conducting MEP-focused engineering site surveys, capturing existing conditions, and identifying system-related constraints. The Field Engineer will also support due diligence analysis based on field observations and assist with production work as needed to ensure project continuity and team flexibility. Key Responsibilities MEP-Focused Site Surveys & Field Assessments * • Conduct thorough on-site MEP field surveys, documenting existing mechanical, electrical, plumbing, fire protection, and related building systems., • Capture accurate measurements, field notes, and photographic documentation to support engineering and architectural teams., • Identify system deficiencies, capacity considerations, code-related issues, and potential design or construction challenges., • Coordinate site access, interact with building personnel, and ensure all field data is collected safely and efficiently. Due Diligence & Analysis * • Perform due diligence evaluations informed by on-site observations, focusing on system conditions, risks, and feasibility., • Prepare clear and concise due diligence reports summarizing findings, system impacts, and recommendations., • Assist in verifying compliance with applicable codes and standards related to MEP systems and existing building conditions., • Communicate findings to internal engineering and design teams to support scoping, planning, and decision-making. Production & Project Support * • Drafting, documentation updates, and production tasks in AutoCAD, Revit, and other software., • Incorporate field findings into engineering drawings, coordination sets, and project documents., • Support engineers and architects with redlines, revisions, and project coordination., • Provide flexibility across fieldwork, analysis, and production based on project workload and departmental needs. Qualifications * • Bachelors degree in Engineering, Architecture, Construction Management, or related field preferred., • 13 years of experience in field engineering, MEP surveys, construction, or similar technical roles., • Working knowledge of building MEP systems, existing facility evaluations, and construction processes., • Proficiency with field equipment, digital measuring tools, and drafting platforms (AutoCAD required; Revit a plus)., • Strong documentation skills and attention to detail in fast-paced field environments., • Ability to work independently at job sites and collaborate effectively with engineering, architectural, and project management teams., • Clear communication skills, with the ability to present technical findings to both technical and non-technical audiences. Core Competencies * • MEP Field Investigation, • Technical Assessment & Problem-Solving, • Time Management & Organization, • Clear Written & Verbal Communication, • Cross-Disciplinary Collaboration, • Adaptability & Flexibility Work Environment * • Frequent travel to project sites required., • Work may include indoor, outdoor, active construction, or existing facility environments., • Occasional office-based work for reporting, coordination, and production tasks.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Why Join BEUMER Group? BEUMER Group is a global leader in automated sortation solutions for e-commerce fulfillment centers. Our BG Sorter ET Tilt-Tray, BG Sorter CB Cross-Belt, BG Line Sorter, and BG Pouch System are designed to optimize performance and scalability for major e-commerce players. As a Controls Engineer II, you will contribute to the development and implementation of these state-of-the-art technologies, ensuring seamless integration with warehouse management systems and high-speed logistics operations that shape the future of online retail. Career Growth & Professional Development: At BEUMER Group, your career doesn’t just stop at Controls Engineer II—it grows with you. We foster an innovative, collaborative environment where engineers can expand their expertise through: • Ongoing mentorship and guidance from industry experts., • Advanced training in automation, machine control systems, and emerging technologies. BEUMER Group’s advanced sortation systems are transforming e-commerce fulfillment with high-speed, scalable, and cost-effective automation. As a Controls Engineer II, you’ll help integrate and optimize these solutions for some of the world’s leading e-commerce brands. Join a global leader driving efficiency and innovation in fulfillment operations. Be part of a team that's redefining digital commerce through automation excellence. Exciting Travel & Global Exposure: As part of the BEUMER team, you will gain international experience by working on high-profile projects with cutting-edge automation technologies. Whether commissioning systems across North America or collaborating with teams worldwide, you’ll develop invaluable expertise while exploring new opportunities in automation. Job Description General Responsibility Are you ready to take your engineering expertise to the next level? As a Controls Engineer II at BEUMER Group, you will play a pivotal role in designing and programming machine controls for cutting-edge high speed sortation systems that power the e-commerce industry. This hands-on position requires technical excellence, organizational skills, and strong communication abilities to ensure seamless automation and efficiency in high-speed fulfillment operations. Responsibilities: • Translate customer requirements into programmatic designs for BEUMER sorters., • Design and program operator panels and HMI systems for intuitive user interaction., • Prepare and test PLC hardware for projects, ensuring reliability and efficiency., • Collaborate with electrical engineering to define I/O networks and addressing., • Work with PC software developers to integrate machine control systems., • Conduct in-house emulation-based testing at BEUMER offices to validate system performance., • Participate in on-site commissioning, ensuring smooth deployment., • Create and maintain documentation to optimize workflow and improve processes., • Provide training materials to support operational excellence. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements & Skills: • Bachelor's or Master's degree in EE/CE or equivalent experience., • 3+ years of hands-on work experience in controls engineering., • Proficiency in advanced machine control concepts and fundamental mathematical techniques., • Demonstrated expertise in programming Allen-Bradley and/or Siemens PLCs at a "Program Development Level," enabling simple program modifications for a single processor. Capabilities include hardware selection, I/O assignment, and logical control sequence identification in a streamlined and iterative process—all meticulously documented and adhering to the company's programming standards., • Capability to develop and integrate SCADA systems for industrial automation, with a focus on Ignition SCADA platforms., • Ability to evaluate engineering challenges and develop innovative solutions, • Strong communication skills (verbal and written)., • Attention to detail and ability to learn quickly., • Team-oriented mindset with a proactive approach to problem-solving., • Time management excellence to handle multiple tasks efficiently., • Ability and willingness to travel nationally and internationally for project execution, up to 40%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Develop sketches, diagrams, design alternatives, calculations, and permitting and construction drawings under the supervision of an experienced civil engineer, • Assist with activities related to project scope, schedule, budgets, documentation, submittals, quality, communications, and disciplines coordination, • Work with MEP, Structural Engineering and Architecture Departments on multi-disciplinary projects for NYCDEP and NYCT, • Attend project/client meetings, • Assist with report writing and development of contract documents, • Collaborate with internal and external stakeholders on project deliverables. Requirements Essential Skills and Experience: • BS, Civil Engineering; MS desirable, • 5+ years’ experience in planning and design of multi-disciplinary engineering projects, including civil-site and water/wastewater/stormwater related infrastructure, • Working knowledge of standard engineering software, e.g., AutoCAD and Civil 3D, H&H modelling, and MicroStation a plus, • Strong analytical and communications skills, • Engineer-In-Training (EIT) License required, • Ability to work independently and as part of multidisciplinary engineering teams, • NYCDEP experience preferredCompany DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job DescriptionDescriptionCME Associates is currently recruiting for an Associate Municipal Engineer to join their team of professionals in our Municipal Engineering Department. If you are a hard-working, self-motivated team player, we invite you to explore a career with CME Associates. Responsibilities • Design and Drafting: Develop civil engineering designs, including site layouts, grading, drainage, utilities, and roadways using CAD software (e.g., AutoCAD Civil 3D), • Permitting and Compliance: Prepare and submit permit applications to local, state, and federal agencies, ensuring compliance with applicable regulations and standards., • Project Collaboration: Work closely with project managers, surveyors, and other engineering disciplines to deliver comprehensive solutions tailored to client needs., • Technical Reports: Create engineering reports, feasibility studies, and calculations to support project design and decision-making., • Education: Bachelor’s degree in Civil Engineering or a related field., • Experience: 2–5 years of experience in civil engineering design, preferably in land development or municipal projects., • Technical Proficiency: Proficiency in AutoCAD Civil 3D and other relevant engineering software; knowledge of stormwater management software is a plus., • Licensing: Engineer-in-Training (EIT) certification required; Professional Engineer (PE) license is a plus or a willingness to obtain it.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Mid-level Geotechnical Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 3 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations

Job DescriptionDescriptionChurchill Consulting Engineers is seeking a Highway Department Manager to join our team. As a Highway Department Manager, you will work on a variety of projects, for clients such as NJDOT and NJ Turnpike Authority, and other agencies Key Responsibilities • Manage department staff workload responsibilities, technical development and day-to-day oversight., • Coordinate with Project Managers to determine technical team assignments for each project., • Monitor staff’s progress, identify issues and risks, and implement corrective actions to keep projects on track and within budget., • Assist Project Managers to manage aspects of project delivery, including scope, schedule, budget, resources, and quality assurance, to ensure successful project outcomes., • Develop project proposals, budgets, and schedules, and collaborate with clients and stakeholders to define project objectives and requirements., • Provide technical expertise and guidance to team members, including engineers, designers, and support staff, to achieve project goals and deliverables., • Coordinate with clients and other stakeholders for project implementation., • Prepare and present project status reports, progress updates, and deliverables to clients, stakeholders, and project sponsors., • Act as Project Manager on select projects, leading multidisciplinary teams in the planning, design, and execution of transportation projects, including roadways, highways, and other infrastructure projects., • Foster a collaborative and inclusive work environment that promotes teamwork, innovation, and professional development. Skills, Knowledge and Expertise • Bachelor’s or master’s degree in civil engineering or related field, • New Jersey Licensed Professional Engineer, • At least 15 years of experience in highway engineering and roadway design; minimum of 2 years of experience in staff management, • Experience with NJDOT, NJ Turnpike, and NJ Counties, • Proven track record of successfully managing projects from conception to completion, including experience with project planning, design, and construction phases, • Strong technical expertise in transportation engineering principles, standards, and practices, including proficiency with relevant software tools and design standards., • Experience with AutoCAD, Civil 3D, Microstation, InRoads and/or Power InRoads., • Experience working with NJTA and NJDOT design and construction requirements, • Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines in a fast-paced environment, • Strong problem-solving and decision-making skills, with a focus on delivering innovative and cost-effective solution BenefitsChurchill offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionDescriptionCME Associates is currently recruiting for a Program Manager to join their team of professionals in our Municipal Engineering Department. The Program Manager is responsible for overseeing multiple related projects within an organization and various clients to ensure they align with business objectives, are executed effectively, and deliver the expected value. The senior program manager will operate as a senior leader within the company supporting staff and project managers deliver high quality products for our clients. They will be responsible for running teams between 3 to 15+ people varying on scope and owning the relationship for a client while engaging in business development activities that generate new revenue. Responsibilities • Ensure that all projects within the program are aligned with strategic priorities i.e. profitability, revenue growth, and resource management., • Responsible for the development of project plans, timelines, and budgets for specific projects assigned to them with little to no supervision., • Facilitate communication between team members, stakeholders, and clients to ensure everyone is aligned with project objectives and timelines., • Monitor project portfolio to ensure objectives are being satisfied and provide timely advice to the Manager/Client on any anticipated delays affecting project commitments., • Owns the progress of projects, ensuring that tasks are completed on time and within budget and is responsible for escalating when project metrics are at risk., • Responsible for the relationships and health of good standing with clients., • Works with senior leadership to develop and guide business development activities for achieving growth targets in assigned areas and clients., • Assist in allocating resources effectively, ensuring that tasks are completed on time and within budget and communicating with leadership when required for additional resources., • Review of Site Plan and Subdivision applicants submitted to Municipal Land Use Boards and attend Municipal Planning Board, Zoning Board of Adjustment, and Council Meetings, when required by management or client., • Coordinate client needs and internal resources and teams to effectively uphold high quality delivery of projects to our clients., • Apply technical skills required to manage the project and client expectations, and to support the staff (e.g. storm water, hydraulics, grading, land use planning, structural analysis, survey, base mapping, etc.), • Consider health, safety and environmental requirements when developing civil designs., • Monitor and track project portfolio’s expenses to ensure that the project stays within the allocated budget., • Ensure that project milestones and deliverables are achieved on schedule and within scope/budget., • Regularly communicate project status, issues, risks, and changes to stakeholders and senior management., • Act as the primary point of contact for clients, ensuring their needs are met and concerns addressed promptly., • Lead, motivate, and mentor project teams, ensuring collaboration and high performance., • Oversee or manage staff to ensure quality control checks to ensure deliverables meet project specifications and client expectations., • Serve as the main point of contact for stakeholders, providing regular updates and addressing concerns., • Engage in CME activities as a senior leader, going above and beyond to ensure the future success of junior staff are set up for success. Qualifications • Bachelor’s degree in engineering, Environmental Science, Surveying, Construction Management, or related disciplines., • Professional Engineer (PE) or equivalent professional license required., • 10+ years of experience in design, construction, or equivalent experience., • 10+ years of experience managing and assisting in project management or client management., • Certified Municipal Engineer (CME), preferredPreferred Qualifications:, • Advanced proficiency in scheduling, resource allocation, and progress tracking., • Proficiency in creating advanced Gantt charts, reporting dashboards, and resource management., • Organizing workflows and visualizing project tasks, particularly for smaller or less complex projects., • Knowledge of cost estimation techniques and software., • Entry level understanding KPIs (Key Performance Indicators) for tracking project progress., • Basic knowledge of AutoCAD or MicroStation if for managing design aspects of engineering projects., • Familiarity with software for managing quality audits and compliance., • Proficiency with Microsoft Teams for team communication and updates., • Experience with SharePoint Adobe or similar platforms to manage project documents, blueprints, and specifications., • Basic knowledge of contract law and understanding of contract management tools for reviewing and preparing contracts and monitoring deliverables., • Knowledge of safety regulations as OSHA., • Ability to create proposals, technical reports, specifications, and other project documentation in an organized and professional manner. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Company LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative (Available on 1st Day of Employment) • Base Salary - $125,000 - $145,000, • Full portfolio of medical, dental, and vision benefits., • Industry-leading 401K plan with company match., • HSA, FSA, and life insurance offerings., • Flexible work schedules with a focus on work/life balance., • Robust learning & development program. As Special Projects Manager, you will be responsible for managing and operating the Special Projects in accordance with annual operating and growth objectives. This Position… Some examples of the work you might do includes: • Assumes responsibility for achievement of the department’s annual sales and operating income goals., • Prospects and establishes new customers by promoting the key capabilities of the Company., • Partners with Limbach Collaborative Services (LCS) to perform reviews for value engineering opportunities and develop complete scopes for design-assist or design-build opportunities., • Provides input on prospective new work and collaborates on cost estimates for selected projects., • Writes bid scope proposals, obtains bid bonds/insurance certificates, and completes customer bid forms., • Reviews bid documents, performs material, labor, and equipment take-offs for trades as required., • Attends pre-bid meetings and project walk throughs to gather information pertinent to site conditions., • Contacts customers/contractors during the bid process to obtain a commitment to perform proposed work., • Executes new contract implementation with customers with the goal of securing repeat, future business., • Tracks and analyzes the department’s accurate job cost, monthly forecasts, billings, and cash collections., • Assembles all necessary documents, estimated information, and calculations into final bids., • Conducts a thorough bid review with peers/management prior to the submission of the project proposal., • Submits project proposals and participates in proposal presentations on an as-needed basis., • Attends scope review meetings, and offers value engineering and breakout pricing, as needed., • Breaks down cost estimates into manageable, measurable segments that allow for accurate cost projections for the lifecycle of a given project., • Trains, develops, and provides feedback to direct reports to facilitate successful attainment of team objectives and adherence to the Required Project Standards (RPS) of the Company., • Executes HR-related decisions (promotions, salary adjustments, corrective actions, etc.) for direct reports., • 5-10 years of hands-on, industry-specific experience required., • Demonstrated ability to engage in effective collaboration and communication (both written and verbal)., • Strong computer skills, including proficiency with Microsoft Office (Excel in particular)., • Capacity to leverage interpersonal skills to develop and enhance business relationships., • Bachelor’s degree [in a construction-related field] or equivalent preferred., • Extensive HVAC or plumbing background preferred., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, and filing cabinets., • In performing the duties of this job, the incumbent is regularly required to walk, talk, stand, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.