Trabajos software development engineer en Albany, NYCrear alertas

Job Description Job Title: Field Service Engineer II – Onsite Reports to: Site Coordinator Classification: Non-Exempt Summary: This position entails the installation, service, troubleshooting and repair of complex electronic and electromechanical equipment, site service, field process applications, and qualifications. In addition, the position is accountable for being able to operate as an independent “product expert” on select EVG product lines. Capable of assisting in the implementation of detailed, complex customer installation plans for reliability, process qualification, and sign-off. Training customer personnel on advanced equipment operation, maintenance procedures and process related operations. Provides onsite technical support for development and implementation of equipment and process applications. Trains other Field Service Engineers on specific product lines. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Provides professional and courteous service to customers with a primary goal of complete customer satisfaction., • Assists customers and other personnel in identifying and repairing equipment related process problems., • Performs onsite preventative maintenance, clean equipment as required and verify the operational quality of equipment., • Performs start-up, warranty, paid service, and service contract activities. Performs hardware set-up on specified systems within established time frames., • Keeps Management informed of down situations. Documents, logs, and reports activities as required., • Troubleshoots and corrects process variations on systems. Diagnoses sources of hardware or process problems on equipment, facilities, or wafers., • Participates in local customer meetings and communicates orally with customers in face-to-face, one-on-one settings, group settings and communicates professionally by email and telephone, as needed., • Prepares and submits all required paperwork on a timely, routine basis., • Maintains all assigned equipment logs and records promptly and thoroughly., • Records activities clearly in written pass down and communicates clearly face to face when handing work off to oncoming shift., • Complies with all OSHA and Customer Safety requirements. Stays current all prescribed and recurrent training courses for EVG and Customer to maintain uninterrupted access to customer site., • Works overtime and/or travel on short notice, including unscheduled callouts from home and other shifts, as needed., • Must be able to travel domestically and internationally overnight, as needed, up to 20% of the time. Must possess a valid passport., • This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver’s license and have acceptable driving privileges., • Trains other Field Service Engineers on specific product lines and company software (timecards, expense reporting, drawings, parts), • Assists and completes onsite equipment installations or complex retrofits on equipment and obtains Final Acceptance by the customer., • Ability to utilize training skills to troubleshoot tools to resolve issues and minimize downtime. Keeps equipment running properly and efficiently to enhance customer satisfaction., • Other duties, as assigned. Additional Duties and Responsibilities: • Initiates purchase orders for parts and service., • Maintains and performs repairs on company demo cleanroom equipment., • Keeps informed and trained on company’s most current systems, methods, and procedures, including site safety., • Demonstrates excellent customer service skills (foreign and domestic)., • Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience: • This position requires an associate degree or bachelor’s degree in a related engineering field plus two (2) years of experience or up to four (4) years of experience installing/repairing semiconductor/electronic production equipment., • Advanced electromechanical troubleshooting skills., • Knowledge of quality improvement process methods and terminology., • Ability to identify and solve advanced process-related system problems., • Ability to communicate and demonstrate professional conduct with all levels of customers, management, and coworkers., • Must have advanced PC skills (Windows, MSOffice suite)., • Kepner-Tregoe Problem Solving and Decision Making training, preferred. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. PI1a856364dc0a-25405-38282542

JOB TITLE: Hybrid Code Integrator/Build Release Engineer JOB LOCATION: Menands NY (must be onsite 4 days a month) WAGE RANGE*: $60hr to $65hr w2 only JOB NUMBER: 25-03312 REQUIRED EXPERIENCE: 6+ years Information Technology. 5+ years in programming, testing, software deployment, Maven Build. Linux system administration and/or middleware administration experience with Application Servers such as JBoss and WebLogic Experience with version control systems, such as GitHub SVN, Perforce, BitBucket, IBM Rational Team Concert, Jenkins automation, Ansible, Bash Scripting. Working knowledge of J2EE Application Development and related tools and technologies such as Eclipse, Application Servers (WebLogic, JBoss). JOB DESCRIPTION Deliver simple solutions to complex problems as a Code Integrator/Build Release Engineer. Your work will have you fully immersed in our client's domain in order to deliver solutions for their complex needs. You'll prioritize the client while we prioritize your career. HOW YOU'LL MAKE AN IMPACT: You'll join our talented Development Team as a member of the Dev Release Management group. Our project is built on a multi-tier architecture including Service Oriented architecture, multi-tier web applications using Java and various other COTS products. You'll have end-to-end ownership of the Code Management Life Cycle process; managing code integrations, code merge, creating deployment request and managing code streams and branches. You'll communicate integration and deployment activities. You'll perform duties such as Research, design, develop, and/or modify enterprise-wide systems and/or applications software. You'll will be involved in planning of systems and development deployment as well as responsible for maintaining software compliance standards and Deploy Process. You'll perform, and may provide guidance on, all phases of the software development life-cycle and Software Deployment. Education : Bachelor's degree in Computer Science, or related technical field, OR equivalent combination of education and experience Required Experience :6+ years Information Technology. 5+ years in programming, testing, software deployment, Maven Build. Linux system administration and/or middleware administration experience with Application Servers such as JBoss and WebLogic Experience with version control systems, such as GitHub SVN, Perforce, BitBucket, IBM Rational Team Concert, Jenkins automation, Ansible, Bash Scripting. Working knowledge of J2EE Application Development and related tools and technologies such as Eclipse, Application Servers (WebLogic, JBoss). Solid understanding of Core Java Concepts such as Object Oriented Programming, Java Collections API, Exception Handling, Multi-Threading is required, Spring Solid understanding of Object Oriented Analysis, J2EE Concepts, Architecture, and Technologies. Experience with web development with client-side MVC frameworks such as HTML, JavaScript, Angular, node.js. Solid experience working with Linux and Jboss. Skills :Must be well organized, have proven skills at creating clear documentation and able to plan and prioritize work. Must be focused on tasks and follow rigorous process. Ideal candidates must have both a development engineering background as well proven role with responsibilities for software Code Repositories, Build implementations, creating automation solutions, managing Linux servers and Jboss Web Applications. Demonstrated collaboration and teaching abilities. Strong analytical skills. Identify and resolve problems in a timely manner; gather and analyze information skillfully; develop alternative solutions. Critical thinking and creative problem solving Plus: Experience working in a continuous integration/deployment development environment. Experience with management of containers (Kubernetes, Docker, OpenShift etc.) Experience with CICD orchestrations. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations. Benefits offered include medical, dental and vision benefits; dependent care flexible spending account; 401(k) plan; voluntary life/short term disability/whole life/term life/accident and critical illness coverage; employee assistance program; sick leave in accordance with regulation. Benefits may be subject to generally applicable eligibility, waiting period, contribution, and other requirements and conditions. Benefits offered are in accordance with applicable federal, state, and local laws and subject to change at TCM's discretion.

POSITION TITLE: Project Engineer II- Licensed (Electrical) POSITION SUMMARY: CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate’s, Bachelor’s, or Master’s degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: • Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects., • Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations., • Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these., • Develops and coordinates engineering technical specifications., • Adheres to and implements corporate contract documentation procedures and standards as they best apply., • Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients., • Supports project management with development of staffing, fee, budget estimating and project scheduling., • Ensures that Quality Control procedures are being met., • Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: • Licensure Requirements: Licensed, • Education Requirements: Associate’s, Bachelor’s, or Master’s degree of Engineering in electrical engineering., • Experience: Minimum 5 years experience as a Licensed Engineer, • Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange, • Excellent written, verbal and visual communication skills, • Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills., • 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

The New York Independent System Operator (NYISO) manages the efficient flow of electricity on more than 11,000 circuit-miles of high-voltage transmission lines, dispatching power from hundreds of generating units across the state. The NYISO's Interconnection Studies department invites applications for a full-time Planning Engineer. The Planning Engineer will coordinate, perform and review technical studies related to the interconnection of proposed new generation, transmission, and load facilities to the New York State transmission system (i.e., interconnection projects); review proposed project facilities, including the conceptual design for interconnection of the project to the NYS transmission system, and associated modeling data provided for the project; prepare base cases to be used in interconnection studies; provide technical coordination with others involved in the performance of interconnection studies including the Interconnection Customers, Transmission Owners, consultants, and others as applicable. ESSENTIAL DUTIES and RESPONSIBILITIES • Reviews proposed project facilities including the conceptual design for interconnection of the project to the NYS transmission system and associated modeling data provided for the project, • Prepares base cases to be used in interconnection studies., • Provides technical coordination with others involved in the performance of interconnection studies and interconnection facility studies including the Interconnection Customers, transmission owners, consultants, etc., • Performs or reviews the technical analysis (steady state, short circuit, and/or stability analysis, etc.) for interconnection studies., • Evaluates and identifies any system upgrade facilities and/or system deliverability upgrades required for proposed projects and develops cost estimates for the identified upgrades., • Prepares and/or reviews interconnection study reports and associated documentation., • Leads and/or participates in project study meetings, • Participates and presents at stakeholder meetings as appropriate Qualifications include: • Bachelor's Degree in Electrical Engineering is required; a concentration in power systems preferred, • 3+ years of experience in the areas of power system planning or design, especially planning or design of transmission system facilities preferred, • Experience with computer programs used in transmission planning or interconnection studies such as power flow, short circuit and/or transient stability, • Knowledge of the following software tools is desired:, • Power Flow (Siemens PTI PSS/E & PowerGEM TARA), • Steady State Analysis (PowerGEM TARA program or equivalent), • Stability (primarily PSS/E), • Short Circuit (primarily ASPEN), • Knowledge of reliability standards and practices related to power system planning and design. The position will be filled at the level (i.e. Associate Engineer (0-3 years of experience), Engineer (3-5 years of experience), or Senior Engineer (5+years of experience)) appropriate with experience and qualifications. The NYISO takes pride in recruiting, developing and retaining highly talented individuals. In addition to competitive salaries, we offer a comprehensive benefits package and innovative reward programs. At the NYISO, we realize the importance of balancing the availability of remote work with the inherent value of bringing people together to attain success in the areas of maximum collaboration, relationship building and growth, teamwork, innovation and problem solving, as well as professional development and mentoring. In this role, you will be required to work onsite from our Rensselaer, NY location several days per workweek, with the option to work remotely on the remaining days. You will also be expected to respond to all business needs that may require any increase to the regular onsite requirements. All offers of employment will be made contingent upon the successful completion of a drug screening and background check. The NYISO is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices. Salary Range $74,000 - $123,600 USD Create a Job Alert Interested in building your career at New York ISO? Get future opportunities sent straight to your email. Create alert

Job Description Exciting Opportunity for Automation & Control Systems Engineers! Join a leading company in cutting-edge automation technologies and take your career to the next level. As a key player in system development, you’ll work with the latest technology, all while enjoying a dynamic and hands-on environment. Our Automation & Control Systems Engineer Enjoys: • Health and Life Insurance, • PTO, • Profit Sharing/Retirement, • A collaborative environment with cross-functional teams, • Bachelors in Engineering and 3+ years experience, • Experience developing software from scratch for automation systems, • Strong knowledge of Siemens PLCs, CNC systems, and commercial industrial robots (Fanuc, ABB), • Ability to work alongside mechanical and electrical engineers to specify control systems, • Proven troubleshooting and debugging skills, especially during machine commissioning

Job Description We are looking for an experienced Transmission and Distribution Engineer to join our rapidly growing T&D team. The ideal candidate will have a background in both Overhead and Underground design and the ability to lead projects, mentor younger staff, and serve as the point of contact for Clients. This position will oversee multiple projects of various complexities, from Concept Design through Construction and As-Built. Duties: • Oversee design of projects including new lines, rebuilds, overhead and underground transmission and distribution., • Mentor younger staff and perform reviews of design drawings and documents., • Develop and manage project schedules, estimates, cashflows and invoicing., • Work with Program Manager to prioritize workload and manage deliverables., • Serve as main point of contact to the client for project., • Minimum of 7 years in Transmission and Distribution Design., • Valid PE license, NY is strongly preferred., • Excellent communication skills., • Experience in Project Management, • Proficiency working with PLS-CADD, AutoCAD Civil 3D, MFAD, CYMCAP and other industry software. Salary Range: $95,000 to $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Engineer I (Controls/Automation focus) to work within a project team to develop, program, and commission Rockwell PLCs and HMI software. You Will: • Automate engineering design, programming, and testing for configuration of Rockwell PLCs and HMI software, • Independently provide project support activities such as detailed design, design review, implementation, program changes, testing/debug, and troubleshooting, • Work Schedule is 3rd shift (Midnight to 10AM), but you can transfer to another shift after 24 months, • Work Week consists of four days on and 3 days off (4 10s). One of the days will fall on a weekend, • Associate's Degree in Engineering, • Minimum of 2 years of automation experience using Rockwell PLCs and HMI software, • Experience in the Life Science Industry a plus, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry, • Prompt enrollment into Medical, Dental, and Vision benefits, • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #BB-LI1

Job Description A multi-discipline consulting firm is seeking a Senior Project Wastewater Engineer for their growing team in Albany, New York! Responsibilities: • Use technical knowledge and experience to lead projects and develop project team’s overall capabilities, • Manage all aspects of projects (planning, design, construction of wastewater conveyance systems), • Lead development of construction documents/specifications, • Handle engineering services during construction, • Coordinate project completion with other disciplines, • Develop medium to large planning and design project from start to finish, • Prepare complete construction packages (including all deliverables), • Create/manage cost estimates and project schedules, • Responsible for completing design tasks within budget and on schedule, • Ensures projects meet established budgets/delivery schedules, • Perform detailed engineering calculations/analysis, • Utilize design software to solve complex issues, • Mentor/train junior staff, • Meet/exceed client expectations Requirements: • Bachelors’ degree in Civil, Environmental, Chemical, or Mechanical Engineering, • 8+ years of planning, design, and construction municipal wastewater conveyance experience, • PE License, • Experience with the following:, • Preparing, reviewing, and approving project designs, specifications, schedules, and cost estimates, • Process design, treatment plant upgrades, and pump station design, • Data analysis/technical problem solving, • Training/mentoring junior staff, • Client relationship building (prepare/develop proposals) and a record of winning business Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Albany, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties: • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently, • New York Professional Engineer’s License is a preferred Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionCompany Description A leading provider of power supplies, converters, and onboard systems for rail vehicles is seeking an experienced Engineering Manager to lead and grow its U.S. Engineering team. This hands-on leadership role is ideal for a systems-oriented engineer with a strong background in rail or transit technologies, product integration, and global coordination. You will act as a key technical liaison between U.S. operations and international engineering centers, driving successful project execution and product support. Job Description Team Leadership & Management * Build, lead, and mentor a multidisciplinary U.S. engineering team (Electrical, Mechanical, Systems, Software, and Manufacturing). * Set goals, allocate resources, and align the team with strategic priorities. * Promote a culture of technical excellence, accountability, and continuous improvement. * Conduct performance reviews, one-on-ones, and career development planning. Cross-Functional & Global Coordination * Serve as the technical bridge between U.S. operations and global engineering teams across multiple countries. * Coordinate technical inputs for proposals, design reviews, and validation efforts. * Collaborate with Project Management, Field Service, Quality, and Production teams to resolve technical challenges. * Lead responses to escalations, warranty concerns, and design feedback from U.S. customers. Technical Execution & Product Support * Define technical direction and U.S.-specific product requirements while coordinating design execution through global teams. * Oversee vehicle integration, interface definitions, and system compatibility. * Support field testing, validation, and troubleshooting efforts for products in operation. * Manage engineering change requests (ECRs), documentation updates, and sustainment efforts including obsolescence and part substitutions. * Ensure local documentation and configuration control adhere to global standards. Qualifications Education * Bachelor’s or Master’s degree in Electrical, Mechanical, or Systems Engineering (Master’s and Systems Engineering preferred). * Formal training or experience with software, embedded systems, or controls engineering is a strong plus. Experience * 5+ years in engineering, including 2–3 years in a technical leadership or management role. * Experience in the transit or rail (Rolling Stock) sector is required. * Background in electronics and/or telecommunications systems is highly desirable. * Strong knowledge of product lifecycle, system integration, validation, and sustainment practices. * Proven ability to lead cross-functional and cross-border teams. Skills * Excellent communication and coordination skills across technical and customer-facing environments. * Hands-on mindset and ability to operate effectively in a fast-paced, small-team setting. * Strong organizational, analytical, and leadership abilities. * Proficiency in English; Spanish language skills are a plus Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Hybrid Albany, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Description: The Gund Company is looking for an entry level Technical Sales Engineer professional who thrives on building relationships! Starting annual base salary: $75,000+ with unlimited commissions! Travel: 25% (5 days/Month) Work Location: 200 Wallins Corners Road, Amsterdam, NY 12010 Markets: Electronics, Switchgear, Aerospace, Metals, Motor, Transformers Territory: Northeast, USA Types of Accounts: $3-7 million medium/large accounts ( total of 100-150 accounts) Sales Engineering Development Program: 6-month rotation with assigned Mentors The Gund Company is a manufacturer and fabricator of engineered material solutions specializing in customized insulation parts. With 12 facilities worldwide, we specialize in custom fabricated parts manufactured according to ISO 9001:2015 certified quality systems. We take a consultative, engineering approach to understanding customer needs and have a reputation for outstanding customer service and quality. Job Summary Technical Sales Engineer The Technical Sales Engineer is responsible for the proactive development of customer relationships and sales generation by understanding and maximizing customer and prospective product and service requirements. The Technical Sales Engineer manages the order acquisition process for assigned customers while pursuing opportunities for expanded sales volume, delivering consultative technical solutions. Job Duties Technical Sales Engineer • Build relationships with TGC's customer base to fully understand the customers' requirements, communicate them to our production team, and determine our opportunities to earn additional business., • Assume ownership for customer relationship and sales development at specific accounts including conducting customer sales visits to identify and obtain additional business opportunities resulting in profitable sales., • Function as technical subject matter expert regarding customer applications by effectively communicating how our products and services can best satisfy their requirements., • Identify new prospective applications for our products by understanding customer requirements and our product capabilities., • Assist with management of external Manufacturer's Rep Firms, to complement selling efforts in assigned territory., • Heavy customer/prospect communication required via the telephone. Proactive Sales and Service Calls are a key part of the monthly job requirement., • Utilize the Customer Relationship Management (CRM) software tool to develop, document and follow up on customer opportunities in a consistent and disciplined manner., • Other duties as assigned. Requirements: Job Requirements Technical Sales Engineer • Bachelor of Science Degree in Engineering or Technical Degree., • 1-3 years' experience as a sales engineer, applications engineer, or inside sales., • Strong and extroverted interpersonal communication skills to maximize customer interactions., • Ability to use critical thinking to identify and implement strategies that create competitive advantage in the market., • Ability to use a CRM platform and other tools to manage the sales process., • Excellent computer skills. PI03d7470b8286-25405-38142189

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Albany, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Responsibilities • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Hybrid with local driving travel You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition, • Configuration & use of one or more of Wonderware DAS/OI Server, FactoryTalk Gateway, RSLinx, RSNetWorx, KepServerEx, • Configuration & development of one or both of Wonderware InBatch & Rockwell FTBatch, • Configuration & development using one or more of Wonderware Historian, FTHistorian, OSI PI, • Use of SQL for database creation, query & management.Ability to develop stored procedures, functions & views and use of SQL commands for integration of control systems to back-end databases. Familiarity with SSRS for reporting, • Configure & operate Allen Bradley PowerFlex Drives via manual HIM or through PLC programming, • Configuration, use & troubleshooting of Allen Bradley Stratix switches, • Bio Reactors, • Skid System Controls, • Clean/Steam in Place, • Freeze Dryers, • Autoclave Control Systems, • Centrifuge Systems, • Building Management & HVAC Control Systems, • Thermal Oxidizer Systems, • Purified Water, • Finished Product Transfer Systems, • Granulator Control Systems, • Boilers and Boiler Control Systems, • Bulk Material Handling and Processing, • Laboratory Systems, • Pasteurization and Homogenization, • Wastewater Treatment, • Weighing and Metering Systems, • Wet or Dry Blending System, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. #LI-BB1

Job Description LaBella is currently seeking a full-time Civil Engineer to join our Municipal group in Albany, NY (can also be located and work from Poughkeepsie, NY, White Plains, NY, Rochester, NY, Buffalo, NY or Potsdam, NY). Duties: • Work on a variety of exciting water resources and floodplain management projects., • Oversight and guidance of projects from initial concept through construction., • Preparation of project proposals., • Collaborate with the team, mentor, and lead appropriately., • Prepare feasibility studies and engineering reports., • Perform and review detailed hydrology and hydraulic calculations and modeling., • Attend training courses to further technical skills and knowledge., • Produce effective and high-quality project documents (including reports, drawings, and specifications)., • Management of projects and clients., • Bachelor's Degree in Civil or Environmental Engineering., • 8-12 years of experience., • Effective communication Skills., • Ability to perform assigned tasks with minimal supervision., • Ability to travel to project sites and work remotely as needed., • Ability to manager workload and budgets as allocated., • Experience using HEC-RAS, HEC-HMS, HydroCAD, and Hydrology / hydraulics software., • Familiarity with AutoDesk products and ArcPrp., • Proficient in Microsoft productivity suite (Outlook, Word, and Excel)., • Ability, willingness, and enthusiasm to learn as necessary to fill different roles based on project needs that vary in breadth, depth, and subject matter., • Effective verbal and written communication skills., • Ability to collaborate efficiently with teammates in different disciplines and different locations., • Ability and willingness to receive and understand instructions/guidance and complete tasks independently. Preferred Qualifications: • Registered as a Professional Engineer preferred or E.I.T. on track to become a PE., • Experience using Civil 3D and/or REVIT software and associated best practices related to layering, drawing/figure production, and coordination between disciplines., • Certified Floodplain Manager or general understanding of floodplain management., • Understanding of building code pertaining to floodplain development., • Experience in filling FEMA Letters of Map Change. Physical Requirements: • Must be able to remain in a stationary position 50% of the time., • Constantly operates a computer and other office productivity machinery such as a calculator, copy machine, and computer printer., • Occasionally move about inside the office to access conference rooms, office machinery, etc,, • Occasionally ascends/descends stairs to access meeting rooms, office machinery, etc. (Elevator is avail), • Occasionally ascends/descends stairs and ladders for observation facility operations and construction activities., • Frequently communicates with design team members, with clients and public, and must be able to exchange accurate information in these conversations., • Occasionally works in outdoor weather conditions., • Occasional travel, primarily within New York State., • Ability to access all areas of project sites and conduct physical evaluations of site and facilities, including ability to climb, walk a significant distance, sometimes on uneven ground; and occasional minor lifting (<50 Ibs.), • Willingness to enter confined spaces, with requisite training, is required. Salary Range: $80,000 - $110,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description A multi-discipline engineering firm with over 70 years in business is looking for a Water/Wastewater Discipline Engineer for their Albany office! Responsibilities: • Use technical knowledge/experience to lead projects, • Manage projects from planning/design to construction of wastewater conveyance systems (pipelines, pump stations storage, and end-of-pipe treatment facilities), • Prepare, review, and approve project drawings, specifications, schedules, and cost estimates, • Lead construction documents/specifications development, • Manage engineering services during construction, • Coordinate project tasks with other disciplines, • Develop medium/large planning and design projects, • Prepare complete construction packages, • Create/manage cost estimates and project schedule, • Complete tasks on schedule and within budget, • Prepare detailed engineering calculations and analysis, • Assist with business development (proposal development/preparation and client management), • Meet/exceed client expectations, • Mentor/train junior staff Requirements: • Bachelor’s degree in civil, environmental, chemical or mechanical engineering or related field of study, • 8+ years of experience in the planning, design, and construction of municipal water/wastewater, • Prior experience in process design, treatment plants upgrades and pump station design, • Experience writing/developing proposals, • Experience utilizing design software to solve complex issues, • PE License, • Strong data analysis and technical problem solving experience Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description LaBella Associates is an industry-leading engineering firm that specializes in building projects. We are currently seeking a Jr. Electrical Engineer to join our team. As a Jr. Electrical Engineer, you will work collaboratively with other engineers as part of a project team to develop concepts, designs, and specifications for various building projects. This is an exciting opportunity for a motivated individual who is eager to gain hands-on experience in electrical engineering. Responsibilities • Work with other engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications and reports., • Prepare electrical design drawings using Revit and AutoCAD., • Perform lighting calculations and arc flash studies., • Bachelor's degree in Electrical Engineering or related field., • Familiarity with electrical design software such as AutoCAD and Revit., • Strong problem-solving and analytical skills., • Excellent communication and teamwork abilities., • Ability to work well under pressure and meet tight deadlines. Salary Range: ($28 - $34/hr.) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an enthusiastic and experienced Validation Project Engineer (Life Sciences) to be responsible for leading or contributing to detailed hardware and software design of process automation control systems projects. This includes defining architecture requirements, developing detailed test protocols, software design specifications, functional design specifications, creating SAT/FAT documentation, and contributing to the overall control system design. You will: • Thoroughly review and comprehend the project scope, approach, and design., • Collaborate with the Project team to assess documentation and validation requirements., • Generate essential project documentation, including design documents and test protocols., • Evaluate documentation created by engineering peers to ensure quality and accuracy., • Ensure the documentation is consistently maintained throughout the project life cycle., • Keep an updated schedule of documentation requirements for ongoing projects., • Identify and clearly define items that fall outside the project scope., • Manage customer correspondence effectively., • Acquire comprehensive knowledge of necessary customer procedures and policies., • Develop a strong understanding of customer equipment and systems., • Actively participate in required meetings and training sessions., • Provide assistance with investigations as needed., • Interpret and understand electrical drawings and design documents accurately., • Support Factory Acceptance Testing and Site Acceptance Testing processes., • Establish and maintain a quantitative approach for estimating the hours needed for documentation development., • Serve as an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Bachelor's Degree in Engineering or Computer Science, or an equivalent educational background. This foundational knowledge is crucial for success on our team., • Exposure to engineering/control system documentation, change control, and a general understanding of GAMP is a plus., • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off. E Tech Group is an Equal Opportunity Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. E Tech Group is an Affirmative Action Employer of individuals with disabilities and protected veterans.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Latham, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description LaBella Associates is currently seeking an Electrical Engineer in our Albany, NY office. Responsibilities • Preparation of electrical design drawings, specifications, and reports., • Responsible for project construction (submittal review, construction observation, and punch lists), • Interact closely with mechanical, civil, structural engineers and project architects and AutoCAD., • Perform lighting calculations and arc flash studies., • Building system design experience focused on power distribution, lighting, fire alarm, security systems & telecommunication, • Proficiency in Revit, AutoCAD, MS Excel and Word, • Familiarity with electrical modeling programs – Lighting software AGi32, Power software SKM, • Familiarity with Arc-Flash Evaluation, • Bachelor’s degree in electrical engineering, • Minimum 5 years engineering experience involving building systems projects, • Strong writing, organizational and communications skills, • Ability to work on several projects simultaneously, • On path towards New York PE license preferred, not required Salary Range: ($75,000 - $105,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. #LI-CA1 #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionSalary: $57.5-$77.5K cb20 is the Capital Regions solution provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service.We are an organization that puts Customers first, acts with Integrity, embraces innovation and values Self-Development and Contribution to our community. We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. Position requires applicant to be on-site full-time in our office located in Latham, NY The role: Support Center Engineer II As a Support Center Engineer II, you will provide Tier 1, Tier 2, and Tier 3 support for managed services customers. This role is responsible for providing customers with technical support, remotely and/or on-site so that they can complete core and essential duties of their roles with functional, required equipment. The candidate should be able to explain features of technical products, answer questions about installation, configuration, upgrades, customization, and usage of technical equipment. A Support Center Engineer applies basic diagnostic techniques to identify problems, investigate causes, recommend solutions to correct common failures, and escalate complex problems when required. Providing a high level of professionalism and day-to-day customer service. Responsibilities: • Perform triaging, troubleshooting, and support to clients via telephone, chat, email support, or tickets., • Document all pertinent end user information in ticketing system., • Provide support for users utilizing laptops, workstations, desktops, iOS, and Android devices., • Provide connectivity support for users devices., • Configure and install software for end user devices such as laptops, workstations, and tablets., • Support the systems and networks of customers., • Provide exemplary customer service., • Perform customer call backs as required., • Using problem-solving and people skills to ensure swift resolutions to technical issues., • Troubleshooting, and diagnosing error messages and failures. Provide Tier 1, Tier 2, and some Tier 3 support. * Participate in 24-hour on-call support rotation. * Ensure system backups are completed. • Create and maintain client and support documentation, • Testing, troubleshooting, and diagnosing error messages and failures. Install, configure, maintain, and monitor Windows, Linux, VoIP, PC, Storage, Virtual, Mobile, Server, O365/M365, and Network environments * Configure, deploy, and troubleshoot patching for devices * Check and troubleshoot backup jobs/engines. Requirements: * Proven analytical and problem-solving abilities. * Strong written and verbal communication skills * Exceptional interpersonal skills, with a focus on rapport-building, listening, empathizing, and questioning skills. * Strong documentation skills * Ability to present technical terms in a user-friendly language. * Ability to multitask and promote department success. * Experience working in a team-oriented, collaborative environment. * 2-5 years of experience in IT engineering * Strong working experience with installation, configuration, maintaining and managing 2 or more of the following: Virtualized Environments, Networking, PC hardware, Windows Servers, Active Directory, Terminal/RDS, SQL, Backup Engines, Cloud, O365/M365, VoIP. Education: • Bachelor's degree in computer science or related field, OR equivalent combination of education and work experience., • Desired: CompTIA A+, Network+ or equivalent certification.

Job DescriptionSalary: $110-135K cb20 is a technology solutions provider of choice for organizations that value IT and Managed Services expertise and category-leading customer service.We partner with the worlds leading hardware and software companies to deliver end-to-end consulting, implementation and managed services across the U.S. With world-class engineering talent and 30+ years of experience cb20 delivers confidence, security, a true sense of control and the highest- quality, end-to-end customer experience in the business. We are seeking a skilled and motivatedAzure and M365 Engineer to join our IT team. The ideal candidate will be responsible for designing, implementing, and maintaining Microsoft Azure cloud infrastructure and Microsoft 365 services. You will play a critical role in ensuring our cloud-based environments are secure, optimized, and aligned with organizational goals. Key Responsibilities: • Design, deploy, and manage Azure infrastructure components including VMs, VNets, Azure AD, and other IaaS/PaaS services., • Administer Microsoft 365 services such as Exchange Online, SharePoint Online, OneDrive, Teams, and Intune., • Implement and manage security features across Azure and M365 including Conditional Access, Defender for Cloud, and identity governance., • Monitor system performance, conduct troubleshooting, and ensure high availability and disaster recovery., • Automate repetitive tasks using PowerShell and Azure CLI., • Collaborate with security, compliance, and development teams to align cloud solutions with business needs., • Manage user identity, access, and licensing via Azure Active Directory and M365 Admin Center., • Ensure compliance with industry standards and internal policies for data protection and access control., • Provide Tier 3 support for cloud infrastructure and M365 environments., • Stay updated with the latest Azure and Microsoft 365 updates, features, and best practices. Qualifications: Required: • Proven experience (3+ years) in managing Microsoft Azure and Microsoft 365 environments., • Strong hands-on knowledge of Azure services such as Azure AD, Virtual Machines, Networking, Storage, Azure Security Center., • Proficient in Microsoft 365 administration including Exchange Online, Teams, SharePoint, and Intune., • Experience with PowerShell scripting and automation., • Strong understanding of networking principles, firewalls, and VPNs in cloud environments., • Microsoft certifications such as:, • Azure Administrator Associate (AZ-104), • Microsoft 365 Certified: Enterprise Administrator Expert, • Experience with hybrid cloud/on-prem environments (e.g., AD Connect, Exchange Hybrid)., • Familiarity with tools like Microsoft Endpoint Manager (Intune), Defender for Endpoint, and Microsoft Purview.

Collaborate in an agile development environment to create scalable, high-performing software solutions. Senior Software Developer – Data Integration. GD Resources is seeking a highly experienced Senior Software Developer to support a major data modernization initiative.

The program allows bachelor-level graduates to gain valuable real-world expertise in open-source software development and earn a master’s degree while earning a competitive salary. Members of the OSTP will learn to develop innovative open-source software platforms with global impact in the areas o

Java SE, JDBC, Java Servlets, and JavaScript development with relational databases. GD Resources is seeking an Expert Software Developer to support a high-impact public health initiative. The position will contribute to the development and maintenance of a critical disease surveillance system that s

The Senior Software Engineer is responsible for the development of new functionality for software products as well as the ongoing maintenance of those applications, including vulnerability resolutions and software version updates. Provide software subject matter expertise and support for all phases

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Provide software subject matter expertise and support for all phases of the NYISO software development lifecycle; including requirements, design, development, testing, deployment and post-production support. Software Engineer or Senior Software Engineer) appropriate with experience and qualification

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Experience in planning and delivering software platforms used across multiple products and organizational units.

Experience in planning and delivering software platforms used across multiple products and organizational units.

Experience in planning and delivering software platforms used across multiple products and organizational units.

Experience in planning and delivering software platforms used across multiple products and organizational units.

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C

Act as a tenant to draw out a workable application design and coding parameters with the essential functionalities Breakdown the process into multiple packets to distribute to other relevant technology project teams Develop various process flow diagrams and working models to streamline the process C