Trabajos Engineering en Albany, New YorkCrear alertas

You can play an important part in disaster relief missions as a Geospatial Engineer for the Army National Guard. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Military enlistment in the Army National Guard

Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards. Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation. What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication. Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding. Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields. Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Job Description We’re not just hiring; we are building a world better than we found it, supporting those who serve the common good, assisting those who are most vulnerable, and helping keep our communities safe. To reach this goal, we are seeking an experienced Associate Enterprise Solutions Engineer to join our Albany, New York Team. In this role, you will support the production of critical communication and life safety system designs in K-12 schools and healthcare facilities aligned with customer needs and Company business strategy under the guidance of enterprise solutions engineers. Accountabilities Include: • Support the design of Nurse Call, RTLS, Wander Management, patient information and entertainment displays, Public Address, clock, and other critical communication and life safety systems., • Assist with providing cost determinations and budget estimations., • Assist with performing needs assessments and site surveys., • Assist with reviewing bid documents and sales orders., • Collaborate with the Sales and other Company teams on sales opportunities to create quotes, proposals, bills of material, and scope of work definitions., • Assist with validation of solution requirements, quotes and Scope of Work., • Support creation and modification of applicable project drawings including floor plans, one-line, riser, and schematic wiring diagrams., • Assist with reviewing bidding documents and Requests for Proposal (RFP) including plans, specifications, and addendums to create budgetary design and proposal., • Assist with creating RFIs to address design issues identified in bid documents., • Collaborate with project management and installation teams on scheduling, project requirements, and project design, deployment, and integration challenges., • Support the installation phase of projects and ongoing service as appropriate., • Assist with producing as-built drawings for project closeout., • Assist with validating solutions and integrations in laboratory or development environments., • Adhere to company and industry standards, building codes, and best practices for system designs., • Maintain required manufacturer certifications and current knowledge of industry codes and standards, and technology business requirements, by participating in internal and manufacturer training, and self-directed research., • Perform other duties as assigned. Requirements for Success: • Associate’s degree in Electrical Technology, or vocational/military electronics training, or equivalent relevant work experience., • Working knowledge of AutoCAD or similar design software for creating and editing technical drawings a plus., • Basic math computation skills to include addition, subtraction, multiplication, division, percentages and fractions., • Computer skills to include understanding basic computer manipulation, managing computer files, word processing, using spreadsheets and databases, creating presentations, finding information, and communicating., • Professional self-starter who is reliable, flexible, proactive, resilient, organized, and punctual., • Effective use of Microsoft 365 suite of products., • Excellent written and verbal communication skills to effectively express ideas and information., • Ability to thrive both independently and in a team environment., • A high level of commitment to customer satisfaction., • Ability to follow policies, processes and procedures., • Demonstrated attention to detail and a commitment to quality of work., • Ability to maintain industry-recognized technology credentials., • Ability to occasionally work extended hours and on weekends to complete tasks., • Maintain a clean driving record. What We Do and Who We Are: Ronco is a technology company providing critical communications technology, installation, and support to the federal government, healthcare organizations and primary education institutions. Please see our website at ronco.net – Our Solutions – Managed Services to learn more about what we do. Founded in 1965, we are a third-generation family-owned and operated organization headquartered in Buffalo, New York, with multiple locations operating along the East Coast. Our footprint includes a local commitment to customers in New York, Pennsylvania, North Carolina and South Carolina. Why Choose Us: In return for your commitment and valuable contributions to the Company, Ronco offers a friendly working atmosphere, competitive compensation, and benefits (Medical, Dental, Vision, HSA, FSA, Life Insurance, Disability, Accident Insurance, Critical Illness Insurance, Hospital Indemnity Insurance, a generous 401(k) match, nine paid Holidays, Sick Pay, and Paid Time Off), on the job training, and opportunities for promotion. We also offer a flexible hybrid working model of 3 days a week in-office, and 2 days a week remote. Long Tenured: Not to brag, but our team rocks! With an average employee tenure of 11 years, our experience authenticates our capabilities. In addition, we are staffed with talented professionals who gauge their success based on our customers. And we do know how to let our hair down and have a serious bit of fun. Vendor Credentialing: This role may require you to meet vendor specific credentialing requirements to visit customer sites as a condition of your continued employment. These requirements vary based on the respective healthcare, educational, state, or federal customer and may include vaccinations, additional background checks, additional drug testing, and any other type of criteria as specified by the customer. Drug Free Workplace: Ronco is a drug-free workplace. Employment is subject to passing a drug test. Equal Opportunity Employer: Ronco is an Equal Opportunity Employer. Only resumes that include your most recent experience/position will be considered. Company DescriptionFounded in 1965, Ronco is a privately owned and operated company headquartered in Tonawanda, New York, with additional offices throughout the east coast. At Ronco, we provide integrated communications technology by installing and supporting organizations seeking to create a better-connected experience for their employees and customers. As leaders in our field, we evaluate our customer's needs and build an integrated system that meets their organization's goals. With a well-established east coast presence, we are committed to providing best-in-class service to our customers. We extend the human connection by empowering better connections.Founded in 1965, Ronco is a privately owned and operated company headquartered in Tonawanda, New York, with additional offices throughout the east coast. At Ronco, we provide integrated communications technology by installing and supporting organizations seeking to create a better-connected experience for their employees and customers. As leaders in our field, we evaluate our customer's needs and build an integrated system that meets their organization's goals. With a well-established east coast presence, we are committed to providing best-in-class service to our customers. We extend the human connection by empowering better connections.

Job Description REQUIRED SKILLS/ EXPERIENCE Position Overview: • Design, develop, test, and implement .NET based solutions (full stack). Mandatory: • 5 years system integration project experience with delivering solutions on modern .NET., • Domain Driven Design, C#, Entity Frameworks, MVC, Cloud, RESTful APIs, JavaScript, Oracle DB, and SQL Server., • Must become a CMA employee. Desired: • Experience with Azure DevOps, concurrent development source control (TFS and Git) and continuous integration (ex. Jenkins)., • Large scale government agency project development and deployment experience (HHS agencies preferred)., • Cloud Architect Certifications (Azure, AWS, and/or GCP). Certifications • Bachelor's degree in information technology, computer science or a related field., • Microsoft Architect Certification (any pertinent).

Job DescriptionONLY CONSIDERING CANDIDATES WITH 7+ YEARS OF EXPERIENCE WHO RESIDE WITHIN A COMMUTABLE DISTANCE TO ALBANY, NY- NOT OPEN TO RELOCATION “Join GD Resources for dynamic opportunities in business management and IT, where innovation meets excellence.” About the Company: GD Resources is a Veteran Women-Owned Business Management and Information Technology company committed to excellence. GD Resources provides dynamic opportunities for veterans and professionals alike to contribute to innovative projects and drive success in a collaborative and supportive environment. Join us to make a difference, advance your career, and grow with a company that values integrity, diversity, and continuous improvement. Job Title: Expert Software Architect Task Order: HBITS-07-14334 Agency: State of New York – Office of Information Technology Services (ITS) Location: Hybrid – Albany, NY Duration: 30 Months Rate: Depends on experience Position Overview Join the New York HBITS initiative to modernize tax systems by upgrading runtime platforms and retiring unsupported technologies. As an Expert Software Architect on the platform team, you’ll define standards, integrate diverse technologies, and guide design sessions that align to the agency’s strategy. You’ll lead installs/configuration on Linux/Windows, support middleware teams, and produce clear documentation, training, and performance improvements. Responsibilities • Lead platform architecture/design sessions; align solutions to strategic direction., • Integrate products and applications into a unified, supportable platform., • Abstract technical implementation details from business users and content providers., • Reduce complex problems to reusable patterns and productivity tools., • Install and configure software on Linux and Windows; set up TeamSite OpenDeploy receivers on Linux., • Support multiple application teams across middleware/platform issues., • Analyze performance and recommend improvements; present proposals to leadership., • Document solutions; design training materials and deliver sessions to platform/middleware teams. Qualifications • 7 years experience with software installations on Linux operating systems., • 7 years experience with administration of TeamSite Software used for management of static web content., • 7 years experience with server administration of WebSphere or Apache HTTP Web Servers., • 7 years experience with software installations on Windows Operating Systems. Required Documents • Résumé, • Copy of candidate identification (driver’s license, passport, visa if applicable), • Degree/certifications (if applicable), • Three professional references, • Completed Form 2 GDR is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law. We are committed to equal opportunity in all aspects of employment, including hiring, promotion, compensation, and benefits. Powered by JazzHR xqxuQeaMqa

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionEnterprise ArchitectEmployment Type: Full-Time, Senior-LevelDepartment: Information Technology CGS is seeking an experienced senior-level Information Technology Enterprise Architect to support the I.T. business mission of a large-scale government enterprise’s IT infrastructure. The ideal applicant should demonstrate knowledge and experience in organization processes and procedures specific to PMI, ITIL, CISSP, SDLC, Agile, ISSO, Six Sigma, and CMMI. The applicant will also be tasked with collecting information for strategic business mission planning and IT investment. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- The IT Enterprise Architect position requires the candidate to possess knowledge, experience, and abilities to broadly understand an organization’s various technologies and teaming with an organization’s leaders to collect information for strategic business mission planning and IT investment.- The IT Enterprise Architecture candidate will demonstrate s exceptional interpersonal and professional maturity and senior-level IT competency. Exceptional oral and written communication abilities and experience and knowledge and experience in organization processes and procedures specific to PMI, ITIL, CISSP, SDLC, Agile, ISSO, Six Sigma, and CMMI are superlative. - Experienced with various EA frameworks, including Zachman, and TOGAF, the EOUSA Enterprise Architect will provide a view for system owners, planners, designers, developers, and subcontractors to provide a holistic view of the enterprise from different perspectives with the understanding of budget constraints.- Additional demonstrated knowledge and experience in the following areas:- Demonstrated engineering abilities in Windows Desktop applications, remote access, MS Windows 7, SQL Server, VMware, EMC, SAN storage, Cloud as a service, Broadworks, Polycomm, BlackBerry, Apple iOS, information security, wireless technologies, system networking, etc.- Understanding and utilization of ITIL, project management (PMI), Agile, Configuration and Change controls.- Capability in providing technical engineering practices recommendations, advice, and enhancements from integration engagements of prior successful systems integrations.- Exceptional writing/verbal/interpersonal negotiation and communication skills with the ability to work confidently and independently with minor guidance. Ideally, you will also have:- VMware server and VDI understanding/experience.- Knowledge of PKI.- MS Windows 2003 Terminal Server.- MS Windows 2008R2 Server.- Cisco UCS.- Broadworks.- Polycomm.- BlackBerry, iOS, Android OS.- Project Management Professional (PMP).- ITIL.- CISSP. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking a Managing Mechanical Engineer to join a multi-disciplinary team in our Mechanical Department. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects including Higher Education, Municipal Facilities, Industrial, Design-build, Aviation and Healthcare. Responsibilities include working on all phases of projects such as client relationships, design, specifications, project team coordination, construction documents, code analysis and consultant interaction. Required Knowledge, Skills & Abilities • 10+ years of related mechanical/HVAC design and project management experience., • Bachelor’s degree in mechanical engineering, • Professional licensure PE is preferred, • Comprehensive understanding of design and construction documents., • Proficiency in CADD & REVIT., • Knowledge of building codes., • Ability to succeed in small and large multi-disciplinary team environments., • Ability to set deadlines, assign resources, monitor/summarize project progress., • Good graphic, communications (verbal and written) and presentation skills., • Self-motivated with ability to lead small and large project teams and multiple projects from concept to construction., • Higher Education and Healthcare experience, • Experience working with both private and public clients Estimated Compensation Range and Benefits $100,000 - $150,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Senior Electrical Engineer BBS is currently seeking a Senior Electrical Engineer/Project Manager for the firm’s Albany office. This senior-level position is perfect for an independent professional who will be responsible for the day-to-day organizational, technical and production aspects for projects of varying types, complexities, scopes and budgets, and will be required to "shepherd" the project development process from conceptual design through substantial completion and final closeout. Working at BBS, you are part of a multi-disciplined firm with a wide range of consulting services located in-house, successfully delivering building and site projects for clients predominantly with K-12/higher educational backgrounds for over 40 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term, and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity and camaraderie. BBS Architects, Landscape Architects & Engineers, P.C. is Long Island-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. WHO ARE WE LOOKING FOR? We are looking for an ambitious and dedicated self-starter with extensive experience in the A/E/C environment. The selected candidate will be a licensed engineer with a minimum of 15 years of successful project management experience on K-12/higher educational and other type of projects. The candidate will also have successful experience with the direct management of employees including other Senior Engineers/Project Managers, project-level architects and engineers, technical designers, and a demonstrated success in winning new business. The candidate should have a dedication to the profession with a strong, self-driven desire to progress. DUTIES AND RESPONSIBILITIES: • Independently manages projects from conceptual design through construction closeout, multiple at one time. Provides support on larger projects to other Senior Project Managers., • Leads in-house design teams of project engineers, project designers, technicians and outside consultants, and works well with Construction Managers and client representatives., • Assesses, understands and designs building engineering systems, i.e. building power, lighting, low-voltage systems and photovoltaic project systems., • Provides, coordinates and oversees production of construction documents and technical specifications for public bidding. Follows production schedules and is able to meet multiple simultaneous deadlines., • In charge of all Construction Administration on assigned projects including but not limited to adhering to public bidding procedures, Contractor submittal review and management, payment requisition review, attending project meetings, field visits, coordinating with multiple trades/contractors., • Delivers projects that comply with all applicable codes, standards and regulations., • Supports project administration activities including but not limited to staffing projections, time requirements, project fees, cost estimating, billing., • Applies quality, cost, and time control measures as necessary to ensure highest level of client satisfaction., • Supervises other project staff and technical teams of different disciplines, sizes, and skill-levels., • Grows our Albany practice through new business development initiatives including but not limited to lead identification, potential client outreach and follow-up, marketing process support. SKILLS AND EXPERIENCE: • Bachelor of Electrical Engineering degree or equivalent., • 15 years of experience as a professional engineer (PE)., • Minimum 5 years of electrical design experience and minimum 10 years of project management experience in consulting environment., • Understand the process and workflow of an A/E project team, work within established cost budgets., • Excellent verbal, written and visual communication skills. Self-driven desire to grow professionally, independence, strong leadership and organizational skills, ability to set and adhere to goals. High-level time management capabilities, meet multiple simultaneous deadlines, delegate tasks, conflict mitigation, client interaction and negotiations, training of staff as needed., • Public presentation capabilities, travel/driving required, occasional night meetings., • High-level of proficiency in AutoCAD and MS Office. Knowledge of Revit advantageous., • Successful project track record in the local A/E/C industry within the Capital District, Hudson Valley, Mohawk Valley and Central New York regions. Experience in interacting with various level government agencies and municipalities is a plus., • Preference may be given to a candidate with strong K-12/higher education experience in the noted geographical area. BENEFITS INCLUDE: • Comprehensive, competitive compensation package., • Group health insurance, dental insurance, and vision insurance plans, • Health Care & Dependent Care Flexible Spending Accounts, • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k plan., • Company-paid vacation starting and sick/personal time., • Professional development program, professional licensing/certifications reimbursement. Send Resume to Frederick W. Seeba, PE at seeba@bbsarch.com BBS is an Equal Opportunity Employer. All qualified applicants are encouraged to apply and will be considered without regard to age, race, creed, color, national origin, ancestry, martial status, affectional or sexual orientation, gender identity or expression, disability, nationality or sex.

Job DescriptionDescription: Senior Highway Transportation Engineer (PE) - NYSDOT, OpenRoads, Roadway Design Lead Albany-area highway and roadway design work including the NYSDOT’s Reimagine 787 project, Albany County and many more projects in the Capital District and Hudson Valley Markets. Serve as the senior technical authority for roadway geometry, design reviews, constructability, standards, mentoring, and Engineer-of-Record-level work on high-profile transportation assignments. What You’ll Do • Serve as senior technical lead and subject matter expert for highway design plans and construction cost estimates for new and rehabilitation projects., • Perform and oversee advanced geometric roadway design, including alignments, profiles, cross-sections, grading, interchange layouts, and corridor improvements., • Conduct senior technical reviews for quality, constructability, regulatory compliance, and adherence to NYSDOT, state, and local design standards., • Support project managers on scope, schedule, budget, client coordination, subconsultant coordination, RFIs, site visits, and construction-phase technical questions., • Serve as Engineer of Record when appropriate and mentor junior engineers while strengthening roadway design standards and team capability.Requirements: What We’re Looking For • B.S. in Civil Engineering or related field; M.S. preferred., • 20+ years of progressive highway and roadway design experience with a Professional Engineering License (PE)., • Advanced proficiency in MicroStation or OpenRoads and demonstrated experience with NYSDOT design standards., • Experience serving as senior technical reviewer, design authority, technical lead, or Engineer of Record on complex transportation work., • Sound engineering judgment, ownership, organization, collaboration, integrity, respect, curiosity, and an improvement-minded approach to better solutions. Preferred Qualifications • Deep experience with roadway reconstruction, corridor improvements, intersection upgrades, rehabilitation, and high-profile transportation assignments., • Ability to independently manage complex design challenges and provide practical guidance to project teams and clients., • Comfort working with state, municipal, regulatory, subconsultant, and internal teams across multidisciplinary transportation projects., • Strong mentoring capability with the ability to develop junior engineers and reinforce quality, standards, and delivery discipline. Why Join Fisher • Lead meaningful highway design work and influence technical standards within a multidisciplinary design services firm., • Work on immediate, high-profile transportation assignments backed by a strong transportation backlog and major NYSDOT project activity., • Grow as a technical leader in a culture built on collaboration, trust, ownership, transparency, continuous learning, and work-life balance. Compensation + Benefits • Salary range: $130,000-$175,000; actual compensation varies based on experience, qualifications, and other factors and excludes the value of benefits., • Competitive benefits include medical, dental, vision, 401(k), company-paid life and disability insurance, PTO, paid holidays, and supplemental benefits., • Hybrid work schedule, professional development reimbursement, shareholders program, strong work-life balance, and employee groups focused on community, inclusion, and employee voice. Location Flexibility This role is based in Albany, NY. Fisher will also consider strong candidates located near Rochester, Buffalo, Syracuse, Ithaca, or other established Fisher office locations, based on project needs and team alignment. Fisher Associates is committed to fostering a diverse and inclusive workplace and does not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid #LI-CA1

Job Description Vistrada is seeking a highly motivated and experienced candidate to serve as an ETL Developer / Data Architect on our Business Intelligence ("BI") team supporting key clients. Vistrada’s clients look to us to provide technical leadership and assist them in solving many of today’s most challenging digital transformation issues and complex data analytics needs. In this role, you will help address operational challenges associated with data modeling, system architectures, data warehousing, integration, and other BI / analytics needs by applying advanced capabilities, modern technology, and best practices to real-world scenarios. This candidate must have at least 4+ years of relevant experience, as described below: Key Responsibilities: Work closely with clients on a broad range of Data / BI-oriented areas, including: • Analytics data warehouse architecture design, development, and testing., • ETL environment implementation and migration., • Report / Dashboard creation using leading visualization technology platforms (e.g., Tableau; Power BI; Qlik; OBIEE)., • Data modeling, involving both structured and unstructured data sets., • Relational data architectures., • Data integration processes., • Model-based system engineering. Required Qualifications: • Bachelor of Science Degree, or equivalent 4-year degree, in computer science or related information technology field, or a masters or doctorate in computer science or related information technology field., • 4+ years of related experience developing and maintaining data interchange systems, interfacing with a broad array of varying data sets, including flat files, direct database connection, and XML transactions., • 4+ years of experience with ETL tools (e.g., Informatica)., • 4+ years of experience with data modeling., • 4+ years of experience developing data analytics ETL environments to support data analytics capabilities., • 4+ years of experience coding with SQL., • Experience with leading visualization technology platforms (e.g., Tableau; Power BI; Qlik; OBIEE)., • Ability to work independently and eager to learn new technologies, techniques, processes, software languages, platforms, and systems., • Passionate, goal driven, team-oriented, and outgoing., • Flexible, self-starter, and demonstrated ability to operate effectively with ambiguous and evolving objectives in a client-facing environment., • Effective communication skills. Preferred Qualifications: • 3 years of experience using scripting languages (e.g., Python)., • 1 year of experience with Tableau Server Administration., • 2 years of experience working with customers in data validation, troubleshooting, and business requirements definition activities., • 7 years of experience performing database development using SQL or PL/SQL., • 1 year of experience developing a data analytics ETL environment to specifically support Tableau visualizations., • 1 year of experience using ETL techniques to support a data analytics program for a government entity., • 2 satisfactorily completed statistics courses from an accredited college, or 1 year of professional experience using statistics., • Strong written communication skills. Company Background: Vistrada is a business, technology and operations services organization dedicated to helping clients plan, design, implement and manage initiatives to generate revenue, manage costs, build and sustain operations, and analyze and optimize their business. Vistrada distinguishes itself by providing seasoned expertise with a flexible team structure allowing agility and responsiveness to our client’s evolving needs. This ensures we bring the right team at the right time while optimizing the client’s investment. Powered by JazzHR KXc5aG17BD

Job DescriptionWGNSTAR is a dynamic and growing company with a global footprint. Primarily focused on the semiconductor industry, we provide a platform for you to expand your career with knowledge gained on the job training, and tailored development. We know we need talented people like you that hold similar values, which is why we do not put limits on learning, development, industry, and personal growth. Start your path to a WGNSTAR career today! Schedule: M-F, 7am-4pm Pay Rate: $25-$30/hr Location: Albany, NY Travel: up to 25% Position Type: Full time Benefits: This position is eligible for WGNSTAR’s full benefits package, including Medical, Dental, Vision, and 401(k). Additional benefits are listed at the end of this posting. Principal Duties and Responsibilities: • Complete installations, modifications and commissioning of Dry Etch semiconductor systems, • Performs on-site service and repair of semiconductor processing equipment, • Maintain distributions systems, including repairs, preventive maintenance and communicating data regarding the condition of systems, • Respond to routine matters as well as severe and emergency conditions, • Able to react calmly during all events to apply safe and lasting resolutions, • Remain current on equipment/tools through appropriate training, manuals, factory periodicals, and other relevant materials, • Coordinates activities with peers, supervisor(s) and customers to minimize equipment downtime and interruptions, • Troubleshoot electro-mechanical faults with little to no outside support, • Troubleshoot equipment problems and coordinate repairs with other stakeholders Requirements: • Reading and understanding of electrical/mechanical drawings and blueprints, • Comfortable with using DVMs and testing electrical circuits, • Experience performing software updates on equipment, • Experience troubleshooting and repairing equipment using factory diagnostic manuals 2-5 years hands on maintenance activity servicing the Automotive industry, HVAC, Ex-Military, or directly supporting the Semiconductor industry with a focus on TEL Dry ETCH or LAM Dry ETCH, • Mechanical aptitude as well as an ability to use appropriate tools, • Excellent customer interface skills, • Ability to travel up to 25% as needed Physical Effort/Activities: May be required to walk up to 5+miles per day, able to be on feet for 8-10 hrs at a time, able to bend, twist, push/pull, crouch, kneel in confined spaces, work at heights, on a ladder, and lift up to 50-75 pounds. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Additional Benefits: Paid Vacation, Select Holidays, Overtime Opportunities, On-site Facilities & Career Development Opportunities. The people who thrive most at WGNSTAR are those individuals who perform well in a team environment, enjoy interacting and engaging with several different stakeholders, and adapt quickly to changing environments, while leveraging their skills, quality, and knowledge to drive themselves and their teams towards continuous improvement and success. This job description is intended to convey information essential to understanding the scope of the job and the general nature and level of work performed by job holders within this job. This job description is not intended to be an exhaustive list of qualifications, skills, efforts, duties, responsibilities or working conditions associated with the position. This position is not eligible for visa sponsorship. All applicants must be legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, O-1, etc). Additionally, WGNSTAR does not participate in the STEM OPT extension program for this role. Equal opportunities and Social Governance WGNSTAR is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. WGNSTAR places an immense emphasis on equal employment, encourages diversity in the workplace, and applies an open-door policy for inclusion of all employees. Our diversity program encourages people from any gender, background, ethnicity, culture, education, and experience to join the company and more importantly build a career through employee development. Through our Global wellness programs, WGNSTAR ensures our employees and families have access to a full range of wellness services through our Employee Assistance Program (EAP). In the communities that surround our business operations, we support individual and group sponsorships for local sports and those that are vulnerable in society. Powered by JazzHR z0YDfoblUQ

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Geotechnical Project Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 3 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations, • Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matchingDental insuranceHealth insuranceLife insuranceUnlimited Paid time offProfessional development assistanceVision insurance If you’re ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description BCA WORKS FOR YOU BCA is a team of architects & interior designers, engineers, and industry professionals working across New York State on the projects communities rely on most - schools, hospitals, public spaces, and infrastructure. We have offices in Binghamton, Ithaca, Rochester, Saratoga Springs, Syracuse, Troy and Watertown, and we work as one firm across disciplines and geography. We hire experienced people because we need what they bring. In return, you'll have real ownership of your work, colleagues who are approachable and generous with what they know, and a firm that's serious about where it's headed. We're a firm that's intentionally evolving, and the experienced people we hire are a part of how that happens. We're not the finished product - but that's part of the point. If you want to be part of building something, BCA is a place where that's actually true. JOB SUMMARY: The Electrical Engineer II supports the electrical team in the design and development of building systems, contributing to projects with increased independence and technical responsibility. This role is responsible for developing Revit models and construction documents, coordinating across disciplines, and supporting construction administration activities throughout all phases of a project. REPORTS TO: Project Manager / Manager of Electrical Engineering MENTORS: Electrical Engineer I ESSENTIAL FUNCTIONS: • Contributes to the electrical design and documentation of building systems, • Produce electrical BIM models relative to compliance with office standards for graphics, model structure, and data management., • Prepares electrical drawings and documentation (Revit primarily, AutoCAD as needed), • Coordinate and prepare electrical loading, circuit electrical loads and lighting calculations., • Prepare and/or obtain electrical equipment selections., • Produces clear, complete, and constructible details for the electrical work., • Editing of project specifications., • Preparing cost estimating for all electrical aspects of the project., • Coordinating and executing the High Performance Design (LEED, CHPS, etc.) when part of project objectives., • Execution of the electrical design during Construction Administration phase with tasks such as submittal review, RFI research and response., • Accomplishes all other duties and tasks as appropriately assigned or requested. EDUCATION & EXPERIENCE: • Bachelor’s degree in Electrical Engineering or 5-8+ years of experience in the electrical engineering field., • IE certification preferred. KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of the basic principles of electrical engineering., • Experience with BIM software, Revit preferred., • Experience with AutoCAD software., • Experience with specification software, SpecLink preferred., • Experience with Microsoft Office, Bluebeam, NewForma or similar., • Knowledge of Building, Energy and Electrical codes, • Knowledge of modern building construction methods and materials and of the preparation of specifications., • Demonstrated successful ability to delegate, manage, and oversee workload of junior level engineers., • Excellent verbal and written skills, including ability to present to others in small and large group formats., • Excellent project management skills, with ability to multi-task and handle competing priorities effectively, while delivering quality work on time., • Excellent analytical and critical thinking skills, with a priority on cost effectiveness and client satisfaction. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job DescriptionDescription: Minimum Requirements Education: Minimum 4 Year Degree - Bachelor of Science in Mechanical Engineering Actual Field Experience: 10-15 years of working in building construction. Direct Hourly Salary: $60/hr - $75/hr dependent on education, experience level, skillset and benefit package selected, rates will vary. Daily PPE: Wear full-faced respirator, hard hat, safety glasses, Tyvek clothing, safety shoes every day during site inspections and oversight services. Position Location: Watervliet, New York Computer Knowledge: Familiarity with USACE Resident Management System (RMS) software database, Procore, ProjNet, Suretrak, or Ebuilder. Government uses software products such as Excel, Word, Adobe PDFs, Microsoft Projects, and Primavera Scheduling Software, AutoCAD. Program Knowledge: Familiarity USACE EM 385-1-1 and Unified Facilities Criteria (UFC) Requirements & Criteria is a plus. Previous Employment Exposure: US Army, NAVFAC, DOD installations a plus Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team and record management file repository. During field work, PPE must be worn 100% of the time. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to: Mechanical, Electrical, Plumbing, Fire Protection: prepare daily QA reports during mechanical walkdown inspections, perform site surveys, collect existing condition data in the field, documenting QA inspections and observe QC tests, ensure daily Punch Lists are maintained and items are closed out in a timely manner, monitor testing and Inspection 3rd Party Agency activities, interpret construction drawings & specifications, observe and document construction activities with photographs and videos, observe Health and Safety plan conformance, including any lead or asbestos abatement, review and comment on Contractor daily QC reports, prepare meeting minutes, monitor supply chain and procurement deliverables, observe and document startup, turnover and commissioning activities. Other Daily Position Qualifications: • Must possess good written skills for daily inspection reports, and other correspondence between Owner and contractor., • Must possess good oral skills for leadership role and public speaking at meetings, • Must support CLIENT in various other construction related functions such as planning, procurement, estimating, and schedule forecasting., • Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Contractor and Vendor Shop Drawings, Risk Register, Request for Information, etc.), • Must provide Owner Oversight via walk-downs, QA inspections, generation of open & punch list items, and closeout activities like as-built reviews, O&M reviews, and warranty reviews., • Must function as a liaison between Owner and contractors, assist with resolving conflicts and identifying solutions, • Must perform tasks as quality inspector to maintain conformance with specifications. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Employment is contingent upon successful completion of a background check. Requirements:

Job Description A multi-discipline consulting firm is seeking a Project Wastewater Engineer for their growing team in Albany, New York! Responsibilities: • Perform various engineering tasks including wastewater collection, conveyance, and treatment processes, • Lead engineering evaluations, • Prepare design calculations, reports, plans and specifications, • Perform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders), • Communicate directly with clients, • Confirm accuracy of plans/specifications, • Perform field activities (site investigations, witness testing and milestone construction observation), • Supervise/manage junior staff, • Assist with business development (write technical proposals/assist with budgeting), • Lead pursuit of small to moderate size projects Requirements: • BS in Engineering (Civil, Environmental, Chemical or Mechanical), • 5+ experience in design of wastewater treatment plants, collection and conveyance systems, and alternative onsite treatment systems, • PE License or ability to obtain in six months, • Microsoft Office Suite experience (Word, Excel, Access, Teams, Outlook), • Knowledge of Autodesk Revit and Civil 3D software Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description Job Summary We are seeking a Quality Control Engineer to join one of the top construction management firms on a mega-project in the Albany, NY area. The Quality Control Engineer will primarily be responsible for ensuring that all work performed on the project meets the required quality and compliance standards. Job Duties and Responsibilities • Support the Quality Control Manager with all project-related quality control and assurance tasks., • Monitor and enforce compliance with project quality standards across civil, structural, mechanical, electrical, and architectural scopes of work., • Perform daily field inspections to verify work is completed in accordance with contract documents, project specifications, and applicable codes., • Work closely with field staff to collect, track, and maintain project-related quality documentation and data., • Coordinate with subcontractors, suppliers, and third-party inspectors to ensure compliance with project quality requirements., • Review material deliveries, submittals, inspection reports, and testing documentation for accuracy and compliance., • Assist in identifying, documenting, and resolving non-conforming work and quality deficiencies., • Maintain accurate QA/QC records including inspection logs, deficiency reports, testing results, and turnover documentation., • Participate in project meetings and communicate quality-related issues to project management and field teams., • Support punch list activities and project closeout efforts to ensure timely completion of corrective actions., • Promote a culture of quality, accountability, and continuous improvement throughout all phases of construction., • Ensure compliance with all applicable OSHA safety standards and project-specific safety requirements while performing quality control activities. Required Qualifications • Bachelor’s degree in Engineering, Architecture, Construction Management, Engineering or related degree., • 5+ years of relevant construction experience working on complex building projects., • Strong attention to detail., • Excellent communication and leadership skills with the ability to coordinate across multiple stakeholders and trades., • Computer knowledge and efficiency, including Microsoft Office Products. Experience with Procore is preferred but not required. Salary: $100,000 - $135,000 Company Overview IslandSearch Group, Inc. D/B/A ISG Consultants is an architecture, engineering, construction and environmental consulting and staff augmentation firm that was established in 2018. As a certified MBE, DBE and SBE firm, we have over 28 years of experience providing professional staff in support of programs and projects within the public and private sectors in the Tri-State area. Please apply directly to LL@islandsearchgroup.com if you have an interest in exploring this opportunity. IslandSearch Group, Inc D/B/A ISG Consultants is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against based on disability.

Job DescriptionCloud Engineer (AWS)Employment Type: Full-Time, Experienced Department: Information technology We are seeking a Cloud Engineer (AWS) who will be responsible for supporting the development of all required documentation necessary to support the engineering, security, and operational processes for a large federal agency. The ideal candidate will possess a strong grasp of cloud computing SaaS, PaaS, and IaaS fundamentals. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Design solutions that ensure maximum flexibility and scalability, while meeting all required security controls.- Support the development of all required documentation necessary to support the engineering, security, and operational processes. - Perform business and technical alternative analysis for any/all aspects of the solution, aiding the customer is making decisions along the way. - Facilitate the transition of the solution to operations, initially and ongoing ensuring at all times the system is operating within the anticipated operating boundaries. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Qualifications:- Bachelor's Degree in Computer Science, Engineering, or other Engineering or Technical discipline or equivalent relevant experience - At least four (4-7) years of professional IT experience performing duties in support of federal government agencies. - 4+ years design, implementation and/or support of highly distributed applications demonstrating strong architectural skills to ensure availability, reliability, etc. - Hands-on experience with AWS (Required) or other cloud services reinforced with architectural design experience - Experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Strong grasp of cloud computing SaaS, PaaS and IaaS fundamentals with experience designing and implementing solutions. Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration- Experience in Cloud computing, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Ideally, you will also have:- Hands-on experience with AWS (required) or other cloud services reinforced with architectural design experience designing and delivering large-scale solutions, most of which that have advanced to the production state. - Develop cloud base solution designs and implementation plans based on customer needs - Familiar with lift-and-shift migrations and migration methodologies for cloud migration - Experience in Cloud Compute, Networking, Storage, and Identity Management AWS Certification or Cloud Architect Certification (or desire to obtain certification) Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems.For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Hybrid with local driving travel You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You have: • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • A DNA comprised of collaboration and teamwork. We are seeking Application Knowledge in: • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition, • Configuration & use of one or more of Wonderware DAS/OI Server, FactoryTalk Gateway, RSLinx, RSNetWorx, KepServerEx, • Configuration & development of one or both of Wonderware InBatch & Rockwell FTBatch, • Configuration & development using one or more of Wonderware Historian, FTHistorian, OSI PI, • Use of SQL for database creation, query & management.Ability to develop stored procedures, functions & views and use of SQL commands for integration of control systems to back-end databases. Familiarity with SSRS for reporting, • Configure & operate Allen Bradley PowerFlex Drives via manual HIM or through PLC programming, • Configuration, use & troubleshooting of Allen Bradley Stratix switches, • Experience programming various other control systems is desired (i.e., GE Fanuc, Siemens, DeltaV, Honeywell DCS, GE iFix) Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job DescriptionPosition Summary The Director of Cloud Services is a senior leader responsible for setting strategic direction and driving operational excellence across the organization’s on-premises cloud infrastructure portfolio. This individual brings visionary thinking paired with technical depth—architecting scalable cloud systems, championing innovation, and building high-performing teams that deliver measurable business outcomes. The role demands a decisive leader who can align cloud strategy with enterprise goals, cultivate a culture of accountability and continuous improvement, and serve as a trusted advisor to peers, stakeholders, and executive leadership. Strategic Leadership & Core Responsibilities Strategy & Vision • Define and own the enterprise on-premises cloud strategy—encompassing VMware, KVM, and Hyper-V platforms—aligning infrastructure direction with long-term business objectives and market opportunities., • implement a forward-looking technology roadmap that integrates modern cloud automation, software-defined data center principles, and emerging industry innovations., • Serve as a strategic advisor and technical authority for engineering staff, product development, sales engineering and cross-functional stakeholders on cloud infrastructure decisions, investments, and risk posture., • Drive continuous improvement across service delivery, operational efficiency, and cost optimization while ensuring cloud investments yield measurable ROI. Building & Leading High-Performing Teams • Recruit, develop, and retain exceptional talent—building a diverse team of cloud engineers, network engineers, and engineering managers capable of executing at scale., • Define clear roles, performance expectations, and career ladders that enable team members to grow into broader leadership responsibilities., • Implement structured onboarding, knowledge-sharing programs, and succession planning to build organizational resilience and depth., • Serve as an active coach and mentor to managers and senior engineers—investing in their technical mastery, leadership skills, and professional trajectories., • Lead by example—demonstrating the technical credibility, executive presence, and leadership behaviors that set the standard for the organization. Infrastructure & Operations • Oversee the design, deployment, maintenance, and optimization of on-premises cloud infrastructure including VMware, KVM, and Microsoft Hyper-V., • Ensure platform uptime, performance, and security across all cloud services while driving a proactive operational posture that anticipates and mitigates risk., • Direct engineering efforts around automation, orchestration, and tooling that reduce toil and improve deployment velocity and reliability., • Maintain technical authority across Windows Server, Linux (RHEL/Ubuntu/Debian), networking (switches, routers, firewalls), and disaster recovery solutions (Zerto, Veeam/Acronis) for the cloud., • Collaborate with product development to ensure cloud service offerings are well-defined, competitive, and delivered within designated timelines., • Manage the full lifecycle of vendor relationships, from evaluation and selection through contract negotiation, performance governance, and renewal, ensuring alignment with organizational requirements and commercial objectives., • Define and enforce vendor SLAs and escalation protocols, that protect service continuity., • Evaluate the vendor landscape to identify consolidation opportunities, emerging technologies, and partnerships that reduce cost and increase capability.Qualifications & Experience, • 7–10 years of progressive experience designing, implementing, and managing large-scale virtual server environments, with deep hands-on expertise across VMware (vSphere, vSAN, NSX-T, vRealize Suite), KVM (CloudStack), Hyper-V, and Linux-based systems (RHEL/Ubuntu/Debian)., • Experience with disaster recovery solutions (Zerto) and backup platforms (Veeam/Acronis); familiarity with cloud automation and orchestration frameworks., • Minimum 5 years in a senior leadership or management capacity, with a demonstrated track record of building and scaling high-performing technical teams in fast-paced, customer-facing environments., • Proven executive presence and communication skills, able to translate complex technical concepts for executive audiences and discuss strategic decisions with data-driven recommendations., • Strong command of security, networking, and storage principles within cloud environments, including software-defined data center (SDDC) architectures., • Demonstrated ability to develop and hire highly technical engineering staff., • Bachelor’s degree in Computer Science, Information Technology, or a related field preferred; equivalent experience with relevant certifications (VCP, RHCE, MCSE) accepted.

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/For more information about CGS please visit: https://www.cgsfederal.com or contact:Phone: +1 (888) 680-5916Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Bridge Design Engineer - Civil/Structural Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer with a civil or structural engineering background to join our growing Bridge and Transportation Engineering team. This role offers the opportunity to work on impactful bridge design and transportation infrastructure projects that enhance safety, resilience, and connectivity in the communities we serve. Whether you are already licensed or pursuing your Professional Engineering (PE) license, you’ll receive mentorship and hands-on experience across a variety of bridge and transportation projects. As a Bridge Design Engineer, you will collaborate with experienced professionals on the design, analysis, inspection, and rehabilitation of bridges, applying current DOT standards and industry best practices. This is an excellent opportunity to grow your career in bridge engineering and transportation infrastructure while making a lasting public impact. If you’re ready to advance your career and help shape the infrastructure of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Design Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Ensure all designs comply with applicable state and local standards, regulations and safety codes., • Support project managers with schedules, documentation, and presentations., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience with a background in structures/bridge design., • EIT required; Professional Engineering (PE) license preferred or ability to obtain licensure., • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Your Impact Matters, Your Career Thrives. Work on impactful bridge design engineering projects while gaining diverse, challenging experience that supports your professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Salary Range $85,000-$100,000 Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed., • May have an opportunity to visit projects under construction under the supervision of a senior engineer or project manager. Overview of Fisher Associates: Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Familiarity with engineering principles, design codes, and standards. Knowledge, Skills & Abilities • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner., • Must be proficient in Microsoft Office products, including Outlook, Word, and Excel Physical Demands & Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds., • Environmental Conditions: Office environment, field environment, construction site environment; exposure to dust, noise, grease, smoke, fumes, gases, heat, cold, and inclement weather conditions when working in the field. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Ready to lead bridge projects that strengthen and connect communities? At Fisher Associates, you’ll take ownership of high-impact bridge design and rehabilitation projects while advancing your career as a Bridge Project Manager. We’re seeking a motivated engineering professional with experience in bridge design, DOT coordination, and project delivery who is ready to step into a visible leadership role. If you’re driven by technical excellence, collaboration, and long-term career growth, this is your opportunity to make a measurable impact. Fisher Associates is seeking a motivated Project Manager – Bridge Engineering to join our growing transportation team. This role is ideal for professionals with experience in bridge design, structural analysis, transportation infrastructure, project management, and quality control who are ready to lead projects from concept development through final design and construction support. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Bridge Project Manager • Lead the planning, design, and delivery of bridge transportation projects., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy in collaboration with teams and clients to ensure alignment and seamless delivery., • Ensure compliance with federal, state, and local regulations, permitting requirements, and quality standards., • Identify project risks and implement proactive mitigation strategies., • Serve as the primary point of contact for clients, agencies, and stakeholders, • Cultivate and strengthen client relationships to support successful project outcomes and repeat business., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Support proposal development, scope definition, and fee estimates for new and existing clients., • Mentor and support the development of junior staff.Requirements: What You Bring, Your Expertise as a Transportation Bridge Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 7+ years progressive transportation bridge design engineering and project management experience, • Demonstrated experience managing bridge design transportation projects from design through delivery., • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MS Office, MicroStation, STAAD and Bridge Design Software preferred, • Proven success in developing trusted, long-term client relationships, • Familiarity with NYSDOT design standards preferred, • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Salary Range $95,000-$130,000 Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver exceptional results through collaborative design leadership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and project leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, collaborative atmosphere., • Your journey is supported by a team-driven environment promoting mentorship and continuous learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Fisher offers competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description We are currently hiring a Senior Mechanical Engineer in our Building Engineering division at our Albany, Poughkeepsie, White Plains, or Brooklyn NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Mechanical Engineer will work with clients to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a mechanical leadership role for the office. Responsibilities • Supervise mechanical engineering staff to develop concepts, strategies, construction documents and engineering reports for new building renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including HVAC, plumbing, process piping systems and fire protection design., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing mechanical project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently, • New York Professional Engineer’s License is a preferred Salary Range: $120,000 - $145,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Albany, NY or Poughkeepsie, NY Office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • Construction phase services such as submittal review and site visits to monitor project progress Requirements • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary Range: ($70,000 - $90,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionSalary: $75,000-$95,000 Per Year About the Role The Highway Engineer Position will work with our clients and the highway team leader to design and detail plans on a variety of Local, State and County highways. There will be opportunities to engage projects at all stages of design and construction including feasibility and preliminary design where design decisions and input are invaluable, roadway design including alignments and superelevation, grading, drainage design, work zone traffic control, traffic signals, signage and pavement markings, pavement cross sections, permitting, bidding, and construction administration. Our team offers a hardworking, dynamic environment, with a focus on balancing employee work-life balance and long-term individual growth. Opportunities for growth within our company are available based on performance, communication skills and teamwork capabilities. Key Responsibilities • Apply broad knowledge of engineering principles and practices.Evaluate, select and adapt standard techniques, procedures and criteria to solve technical issues., • Prepare basic and advanced engineering designs and/or technical data for completion and accuracy., • Provide advanced judgement and analysis techniques to prepare complete project documents including design reports and final plan sets, • Perform engineering quantity takeoffs and create construction costs estimates., • Assist with proposal development for professional services., • Perform field investigations/site visits as needed and prepare reports., • Interpret and follow scopes of work, budgets, and schedules, completing projects within budget and on time., • Analyze and interpret data, formulate and solve problems, • Coordinate with other team members to ensure project success., • Design complete projects, systems, components or processes., • Demonstrate knowledge of standards including MUTCD, AASHTO and NYSDOT. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: • Binghamton, NY, • Horseheads, NY, • Rochester, NY Qualifications • Bachelors Degree in Civil Engineering required, • Minimum four (4) years experience in highway/roadway design, preferably with EIT, PE is a plus, • Strong knowledge and experience in local and state highway/roadway design, pavement design, drainage system evaluation, intersection design, turning lane warrants, maintenance/ protection of traffic plans, and NYSDOT specifications/ details., • Knowledge of NYSDOT highway design manual and specifications, • Microstation and/or Open Roads Designer experience a must, • Traffic analysis and studies experience and signal design experience a plus, • Good technical writing and communication skills, • Knowledge in plan and specification preparation, • Self-motivated, organized, and open to learning new and innovative design procedures and methods Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job Description Job Description Position Summary The Commercial Construction Senior Project Manager is directly responsible for the overall success of the project. The primary focus will be on contract management, scheduling, budgeting, cost control, and customer service. This position is located in Albany, NY area. Job Specifications • Ability to read and understand Contract Drawings and Specifications, • Experience drafting subcontractor scopes or work, • Contract negotiations, • Logical and organized approach to completing tasks and solving problems, • Full understanding of all Divisions of work, • Must have a strong work ethic, • Ability to forge relationships with the client base, • Ability to create, manage, and update project Schedule using industry software, • Successful track record managing projects greater than $15M, • Other duties as assigned. Knowledge and Experience Requirements • A minimum of 7-10 years’ experience of project management on commercial construction projects., • Must have completed 3 similar projects: Phased, occupied renovation space, and value of +$30MM, • Software proficiency in AutoCAD, Revit/Navisworks, On-Screen Takeoff, Procore, P6, and/or Asta Power Project preferred., • Work location will be on the project site of the work at any time work is being performed unless an absence is approved., • Must have strong interpersonal, verbal, and written communication skills and the ability to present information to supervisors, groups of clients, top management, or team., • Bachelor’s degree in Engineering, Architecture, or Construction Management Preferred, • Professional Engineering License in the state of New York is preferred. Benefits • 100% Employer-Paid Benefits for Employees (Medical, Vision, Dental), • Competitive Salary, • 401k Match, • Company Employee Stock Ownership Program (ESOP), • Cell Phone Allowance, • 3 Weeks PTO, • Holidays, • Volunteer Time Off, • Summer Fridays, • Paid Parental Leave, • Paid CPE/Dues/Licenses, • Mileage Reimbursement, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus, • Fun Culture & Employee Events Kokolakis Contracting is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status, such as race, religion, color, national origin, sex, sexual orientation, gender identity, or age. Attention All Third-Party Agencies, Headhunters, and Recruiters Kokolakis Contracting will not accept candidate submission by unsolicited third parties through this site or any company email address. All unsolicited candidates presented to Kokolakis Contracting will be considered the property of Kokolakis Contracting. Kokolakis Contracting will not be responsible for any fees associated with unsolicited candidates, nor will a contractual relationship be formed by the submission. Kokolakis Contracting will not be obligated and will not under any circumstances pay any fees to said third parties submitting candidates in this manner. Kokolakis Contracting only forms contracts with recruiters with whom we have an established business relationship and with whom we have in place a signed agreement. All contact with Kokolakis Contracting from third parties must be through our Human Resources Recruiting department. Outside recruiters are asked not to contact our hiring managers directly. Any contact made outside of the Kokolakis Contracting Human Resources Recruiting Department by a third party will cancel any future business relationships between the third party and Kokolakis Contracting.

Job Description BCA WORKS FOR YOU BCA is a team of architects & interior designers, engineers, and industry professionals working across New York State on the projects communities rely on most - schools, hospitals, public spaces, and infrastructure. We have offices in Binghamton, Ithaca, Rochester, Saratoga Springs, Syracuse, Troy and Watertown, and we work as one firm across disciplines and geography. We hire experienced people because we need what they bring. In return, you'll have real ownership of your work, colleagues who are approachable and generous with what they know, and a firm that's serious about where it's headed. We're a firm that's intentionally evolving, and the experienced people we hire are a part of how that happens. We're not the finished product - but that's part of the point. If you want to be part of building something, BCA is a place where that's actually true. JOB SUMMARY: The Electrical Engineer III leads the design and delivery of electrical systems for building projects, providing technical oversight, coordination, and mentorship across the electrical team. This role is responsible for developing and reviewing Revit models and construction documents, ensuring quality and consistency, and supporting project execution through all phases, including construction administration. REPORTS TO: Project Manager / Manager of Electrical Engineering MENTORS: Electrical Engineer I, Electrical Engineer II ESSENTIAL FUNCTIONS: • Leads the electrical design and technical execution of projects, • Analyze and provide resolution for problems on existing electrical systems., • Produce electrical BIM models relative to compliance with office standards for graphics, model structure, and data management., • Oversees preparation of electrical drawings and documentation (Revit primarily, AutoCAD as needed)., • Coordinate and prepare electrical loading, circuit electrical loads and lighting calculations of the project., • Prepare and/or obtain electrical equipment selections., • Prepare complete and constructible details for the electrical work., • Leads coordination of project specifications., • Preparing cost estimating for all electrical aspects of the project., • Integrates and coordinates high-performance design strategies (LEED, CHPS, etc.) when applicable, • Leads construction administration efforts, including submittal review, RFI responses, and field coordination., • Performing quality control and quality assurance review of the electrical drawings and specification for projects completed prior to having them ready for bidding., • Responsible for working effectively with internal departments to drive firm’s strategic initiatives., • Accomplishes all other duties and tasks as appropriately assigned or requested. Mentoring Duties: • Oversees and mentors Electrical Engineer I and Electrical Engineer II’s., • Assisting with recruiting efforts and trains staff., • In conjunction with the Electrical Engineering Department Manager evaluates employee performance and recommends or initiates promotions, transfers and disciplinary action. EDUCATION & EXPERIENCE: • Bachelor’s degree in Electrical Engineering, • 8+ years of electrical engineering experience, • PE licensure required KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of the basic principles of electrical engineering., • Experience with BIM software, Revit preferred., • Experience with AutoCAD software., • Experience with specification software, SpecLink preferred., • Experience with Microsoft Office, Bluebeam, NewForma or similar., • Knowledge of Building, Energy and Electrical codes, • Knowledge of modern building construction methods and materials and of the preparation of specifications., • Demonstrated successful ability to delegate, manage, and oversee workload of junior level engineers., • Experience with staff managerial and workload planning duties., • Excellent verbal and written skills, including ability to present to others in small and large group formats., • Excellent project management skills, with ability to multi-task and handle competing priorities effectively, while delivering quality work on time., • Excellent analytical and critical thinking skills, with a priority on cost effectiveness and client satisfaction. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description HiFyve is hiring a Technical Field Service Engineer based in the U.S. Applicants can live anywhere, must possess a valid passport and TWIC card for domestic and international travel. Salary: $90k to $110K Annually + OT (non-exempt role) Schedule: Work Schedule Pending Travel Demands Location: Based Remotely, Travel across U.S. and Canada Job Duties and Responsibilities: • Supervise and execute installation, commissioning, maintenance, and troubleshooting of rotational and turbo machinery., • Lead field service teams, up to 20 people, and ensure projects meet safety, environmental, and quality standards., • Analyze and resolve technical issues, collecting and reporting data to improve performance and reliability., • Advise customers on operational best practices, maintenance programs, and spare parts planning., • Perform vibration diagnostics, technical assessments, and customer training., • Collaborate across teams, including engineering, field service, and aftermarket sales. Education Requirements: • Bachelor's Degree in Mechanical Engineering Knowledge, Skills, and Abilities: • MUST be flexible for travel between U.S. and Canada for up to 90 days at a time, • Valid Passport or ability to obtain a Passport, • TWIC Card Required, • Minimum 10+ years hands-on experience with Steam Turbines and Compressors, • Customer Experience Mindset to drive external solutions forward, • Advanced supervisory skills and ability to lead large, complex field projects., • Proficiency in Microsoft Office Suite, including Word, Excel, PowerPoint, and Project., • Ability to train others and lead technical discussions., • Experience working with international teams and contractors.

Job Description "All candidates must be directly contracted by ASK Consulting on their payroll and cannot be subcontracted. We are unable to provide sponsorship at this moment". Job Title: Field Engineer Location: Menands, New York, United States of America Duration: 6+ months Pay Rate: $24.29/hr. Job Description: Weekly Mileage: 250-350 per week Vaccination Requirement: Vaccination is NOT required Candidate(s) are NOT paid to drive to and from work. All mileage during the day to work locations are reimbursed per the standard company's mileage. Key Responsibilities: • As a Field/Computer Technician, you will be assigned service requests to repair Laptops and Desktops in the metro area., • Your assignments will include repair activities such as replacing hard drives, motherboards and keyboards., • You may also perform whole unit swaps, repair or replace PC peripherals., • Must have reliable transportation as this role services the metro and surrounding areas., • Close service tickets in real time in the Company's Call Management system using Company provide phone. Key Qualifications: *Must have his/her OWN RELIABLE CAR and CAR INSURANCE* • 1+ Years of hands-on experience with laptop and desktop break-fix, • Computer-building background experience preferred, • General knowledge of laptop / desktop hardware and software including basic knowledge of Microsoft applications, • Ability to resolve basic / non-complex problems as directed, • Client and/or governmental clearance may be required, • Police or criminal background verification clearance may be required About ASK: ASK Consulting is an award-winning technology and professional services recruiting firm servicing Fortune 500 organizations nationally. With 5 nationwide offices, two global delivery centers, and employees in 42 states-ASK Consulting connects people with amazing opportunities ASK Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all associates.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking Senior Aveva PI Engineer who wants to be part of a growing business to support the design, deployment, testing, and maintenance of PI Systems. You Will: • Serve as team lead on PI System applications through installation, design, implementation and support., • Design, build, test, validate, troubleshoot and debug new and existing systems., • Commissioning of new PI systems, • Development of design documentation/testing protocols and supporting protocol executions, • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You Have: • Bachelor's Degree in Engineering, • 5+ years of experience designing and maintaining PI Systems, • Experience integrating PI with PLC and DCS systems, • Experience in using Asset Framework to create asset models, • Experience in using PI Vision or other tools to create displays and reports for front end users to leverage the PI Data, • Experience with PI to PI and RDBMS interfaces is a plus, • Understanding of IT systems, Automation, and network infrastructures, • Understanding of Biopharmaceutical processes is a plus, • GMP and validation experience is a plus, • Knowledge of S88 Batch standards and experience implementing batch systems is a plus, • A DNA comprised of collaboration and teamwork. Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. Salary range: 120,000 - 140,000 E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs. #LI-SK1

Job DescriptionRole Summary: Responsible for delivering automation solutions across SDLC, ensuring quality, compliance, and reliability through automated testing and validation frameworks. Key Responsibilities: • Design scalable automation frameworks, • Build end-to-end automated testing scenarios, • Define test strategies (functional & non-functional), • Perform QA/QC and audit-compliant validation, • Automate testing for workflows, validation rules, security, • Validate OmniStudio components, • Lead QA efforts and coordinate teamsMandatory Qualifications:, • 7+ years of experience, • 2+ years in Automation leadership role, • 3+ years Salesforce development experience, • 3+ years experience with Flows, OmniStudio, Apex/LWCPreferred:, • Salesforce certifications (Admin, App Builder, Advanced Admin), • Experience with tools like Selenium, Provar, SmartBear, • Experience with LWC testing and integrations

Job Description We are currently seeking qualified candidates to fill a Bridge Project Engineer position in our Albany, NY or Poughkeepsie, NY office to lead, oversee, supervise, and coordinate project activities for assigned project through all phases. Responsibilities • Ensure the success of the projects under his/her management (including planning, quality assurance, deadlines, and financial aspects/collections) and the substantial quality of the firm’s services, • Handle all aspects of a project, including proposal, contract negotiation, Project Work Plan (scope, fees, hours, schedule, budget), negotiate terms and conditions, and final agreement/contract in conjunction with the project team, • Plan, organize, and supervise the work and workload of project staff, • Monitor project costs to ensure that project is delivered within budget, • Review invoice charges for accuracy related to hours billed, coordinate customer billing and/or invoicing with Accounting Department, and follow up on outstanding invoices as needed, • Prepare monthly financial reports (project percent complete, month end closeouts, projections, etc.), • Resolve all project related issues Requirements • New York State Professional Engineer license required., • 8-15 years of Bridge Project Management experience and previous NYDOT experience., • Proven ability to manage bridge projects and lead teams to meet schedule, budget and quality., • Strong communication skills, • Ability to work remotely with team members in other offices., • Experience with local municipality and state projects Salary Range: ($90,000 - $125,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Position Summary: The Project Engineer Intern supports construction project teams by assisting with planning, documentation, and coordination activities. This role contributes to tracking project progress, preparing reports, and ensuring tasks align with established schedules and project objectives. The intern may participate in site visits, review technical drawings, and collaborate with team members, contractors, and stakeholders to support project execution. This position provides valuable hands-on experience with engineering processes, project management tools, and cross-functional teamwork in a dynamic, real-world construction environment. Essential Duties & Responsibilities: • Support the preparation of project budgets and estimates-to-complete., • Assist in developing, updating, and maintaining project schedules., • Establish and maintain project documentation, including reports, logs, and tracking tools., • Monitor and track project activities, including shop drawing submittals, RFIs, field changes, change orders, and procurement/delivery schedules., • Assist estimators in preparing cost estimates in accordance with bid procedures., • Support post-bid buyout activities, including subcontractor and vendor selection., • Analyze subcontractor and vendor proposals; assist in negotiating subcontract agreements, purchase orders, and change orders., • Assist in reviewing and approving vendor and subcontractor invoices for accuracy and completeness., • Review materials and equipment to ensure compliance with contract documents, specifications, and approved drawings., • Support quality control efforts to ensure all work and materials meet project requirements., • Coordinate project activities to support schedule adherence and efficient execution., • Collaborate with Project Managers and Superintendents to support overall project controls and execution., • Communicate effectively with field and office teams to resolve issues and provide project updates., • Process and distribute Requests for Information (RFIs) and related project documentation., • Support compliance tracking for WBE/MBE/DBE requirements, as applicable., • Perform other duties as assigned. Required Qualifications: • High school diploma or GED equivalent., • Currently pursuing a degree in Civil Engineering, Construction Management, Business Management, or a related field., • Strong organizational, time management, and communication skills., • Ability to read and interpret blueprints, drawings, and construction plans., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook)., • Detail‑oriented with strong follow‑through and vendor communication skills. Preferred Experience: • Basic familiarity with construction site or field operations., • Familiarity with Bluebeam Revu or take-off software., • Exposure to HCSS estimating software or similar construction tools., • Demonstrated willingness to learn, adapt, and take initiative in a dynamic environment. Physical Requirements: • Ability to stand, walk, bend, and lift or carry up to 30 lbs., • Ability to sit for extended periods while working at a computer., • Ability to view computer screens and printed materials with or without reasonable accommodation., • Required use of PPE (hard hat, safety vest, steel‑toe boots) in operational areas. Work Environment: • Combination of office-based work and field responsibilities, with regular travel to job sites., • Exposure to active construction environments, including noise, dust, and varying weather conditions., • Fast-paced, collaborative environment requiring coordination across multiple teams and stakeholders., • Standard business hours with occasional extended hours based on operational needs. What We Offer: • Highly competitive pay, • 401(k) retirement plan with up to 8% company match, • 15% Carhartt discount for all NY employees Carver Companies is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, disability, age, sexual orientation, gender identity, or any other protected status under federal, state, or local laws. Monday - Friday 7:00am - 3:30pm

Job Description Position Overview: The Hampton Inn Western Ave is seeking an experienced Maintenance Technician! As part of the Maintenance team, this position performs all necessary repairs and preventative maintenance as directed by the Chief Engineer/Engineering Supervisor, to maintain a safe, attractive, and efficiently operated hotel. He/she is responsible for performing other duties as assigned. Job Responsibilities: As a Maintenance Technician, you will be responsible for giving our guests the best hospitality experience you can by: • Completes maintenance requests in a timely manner. Works on improvement projects and preventative maintenance programs as directed., • Performs Suite Care, to maintain suites for guest satisfaction., • Performs exterior property maintenance, such as carpentry repair, painting, and all other functions necessary to the facility., • Exhibits friendly, caring attitude toward guest and co-workers., • Consistently leaves maintenance slip in guest suite when work is completed., • Practices safety throughout work shift by removing/correcting and hazards identified., • On call (emergency) rotation and works close with the housekeeping department., • Maintain high standards of personal appearance and grooming, which include compliance with Company dress code and wearing a nametag when working., • Always maintain a professional and friendly demeanor., • Must always be attentive, courteous, and efficient in the dealings with guests, managers and all other employees., • Establish and maintain good communications and teamwork with fellow employees and other departments within the hotel., • Routinely communicate with the Housekeeping Manager and all other employees on issues of maintaining the property in excellent condition., • Communicate with other hotel staff to accommodate special guest requests., • Comply with compliance standards and regulations to encourage safe and efficient hotel operations., • Responsible for maintaining the physical structure and grounds of the hotel property in like-new condition, including landscaping, walkways, pool area and sport courts, as directed by Engineering Manager., • Assign or handle maintenance requests, improvement projects and develop preventative maintenance programs., • Must be able to use two-way radios, telephones, general office equipment and various types of maintenance equipment., • Follow compliance with company standards, safety rules, and health and sanitation regulations., • Have working ability with HVAC, electrical, plumbing and carpentry as needed. Qualifications & Requirements: • Previous hotel or related field maintenance experience is required., • A working ability with HVAC, electrical, plumbing, and carpentry is needed, and formal training in at least one of these disciplines is preferred., • English skills are required., • All state and local age and licensing requirements must be met prior to operating and handling any hand or power tools, torches, chemicals, etc., as well as for driving the hotel van., • Must have a valid driver’s license., • Long and flexible hours are sometimes required., • Must be able to work evenings, weekends, and holidays as needed., • Heavy work - Exerting up to 100 pounds of force occasionally, up to 50 pounds of force frequently and up to 20 pounds constantly to lift, carry, push, pull, or otherwise move objects., • Ability to stand during the entire shift., • Ability to reach overhead, utilize both hands, bend over, and stoop and kneel., • Must be capable of climbing and descending stairs during their shift., • Must be able to understand and follow directions, guidelines, and work objectives as set forth by the Engineering Manager., • Must be able to understand the potential hazards and subsequent procedures involved in working around commercial chemical agents and various types of machinery., • Must use common sense and integrity in ensuring the security of guest belongings while working in occupied suites., • Must be able to work in a self-managed and self-directed environment., • Must be effective in handling problems in the workplace, including anticipating, preventing, identifying, and solving problems as necessary. Hampton Inn Western Ave is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR m8JMtnZQnh

Job Description Complete seeks a highly skilled and experienced Level 3 engineer to join our team. In this role, you will provide escalated technical support, resolve complex issues, and make significant contributions to our company’s success. You will also play a vital role in maintaining and enhancing our internal IT infrastructure. We seek a motivated and results-driven individual with an entrepreneurial mindset, a strong understanding of modern IT infrastructure, and a passion for delivering exceptional customer service. Key Responsibilities: • Serve as the highest-tier escalation point for the most complex and persistent technical issues across all client environments, including on-premises infrastructure, cloud platforms, networking, security, and critical applications., • Provide expert-level troubleshooting and problem resolution for all aspects of existing Azure Virtual Desktop (AVD) environments, including performance optimization, complex user profile issues, and integration challenges., • Provide timely and effective technical support to clients, ensuring their systems run smoothly and meet their business needs., • Create, implement, monitor, and troubleshoot client backup and recovery solutions to ensure data integrity and successful restoration procedures., • Maintain and enhance critical internal IT infrastructure, including servers, networks, applications, and systems, to ensure optimal performance and reliability., • Proactively monitor and maintain critical client infrastructure, including servers, networks, applications, and systems, anticipating potential issues and implementing preventative measures., • Create, maintain, and update comprehensive technical documentation, including standard operating procedures (SOPs), knowledge base articles, and troubleshooting guides, setting a high standard for quality and detail. Qualifications: • Bachelor’s degree in Computer Science, Information Technology, or a related field, or equivalent extensive professional experience., • Minimum of 5+ years of progressive experience in a Managed Services Provider (MSP) environment, with a demonstrated track record of successfully resolving complex client challenges across diverse IT landscapes., • Exceptional ability to troubleshoot and resolve highly complex, ambiguous technical issues with minimal supervision, consistently identifying root causes and implementing effective, long-term solutions., • Proven expertise and deep understanding across a broad spectrum of modern IT infrastructure:, • Azure Virtual Desktop (AVD): Expert-level troubleshooting experience for existing AVD environments, including advanced performance tuning, complex user profile issues, application delivery, and intricate network/identity integrations., • Windows Server Administration: Expert proficiency in Active Directory design, implementation, and troubleshooting; advanced GPO management; and advanced knowledge of DNS, DHCP, and IIS, including clustering, high availability, and performance optimization. Experience with Windows Server automation and scripting (PowerShell) for complex tasks., • Networking: In-depth knowledge of TCP/IP, routing protocols, switching technologies, network security, and firewall management in complex and hybrid environments., • Virtualization: Advanced experience with VMware and/or Hyper-V, including virtualization design, implementation, and management at an enterprise level; experience with clustering, high availability, and disaster recovery in virtualized environments; and knowledge of virtualization automation and orchestration., • Microsoft Modern Workplace: Expert-level ability to troubleshoot and resolve issues within Microsoft 365, Teams, SharePoint, and Intune, ensuring seamless user experiences, including advanced security, compliance, and automation capabilities., • Backup and Recovery: Proven experience in designing, implementing, and troubleshooting backup and recovery solutions and disaster recovery planning, including in-depth knowledge of backup methodologies, technologies (e.g., Veeam), and best practices., • Exceptional verbal and written communication skills, with the ability to articulate highly technical information clearly and concisely to both technical and non-technical audiences, including senior leadership and clients., • Demonstrated strong leadership and mentoring abilities, with a track record of successfully guiding and developing junior engineers., • Highly approachable and collaborative, fostering an environment where team members feel comfortable seeking guidance and escalating complex issues., • Proven ability to analyze complex situations, identify root causes, and develop practical solutions, focusing on proactive problem-solving., • Ability to work effectively within a team and collaborate with colleagues across departments. Preferred Skills: • Extensive experience with ConnectWise Automate and/or ConnectWise Manage., • Experience in configuring, managing, and analyzing data from SIEM tools to detect and respond to security threats., • Industry certifications such as Microsoft Certified: Azure Virtual Desktop Specialty, Microsoft Certified: Azure Solutions Architect Expert, CompTIA Network+, CompTIA Security+, AWS Certified Solutions Architect., • Strong understanding of ITIL or other IT service management frameworks.Company DescriptionComplete is a recognized leader in outsourced IT services to small and midsize businesses in the northeast, the Carolinas, California and Florida. We achieve our award-winning results by recruiting and retaining a world-class team, adhering to best-practices, delivering services consistently, and maintaining best-in-class technology partnerships. Our customers work with us because we offer high-quality, consistent service, which we're able to deliver by working only with managed clients. We prize both teamwork and individual accountability. Hard work is rewarded and is balanced with personal time. We are committed to growth through aggressive sales and marketing and to longevity through sound fiscal management. Come join our growing team in a fun and dynamic work environment. We offer excellent opportunities for professional development.Complete is a recognized leader in outsourced IT services to small and midsize businesses in the northeast, the Carolinas, California and Florida. We achieve our award-winning results by recruiting and retaining a world-class team, adhering to best-practices, delivering services consistently, and maintaining best-in-class technology partnerships. Our customers work with us because we offer high-quality, consistent service, which we're able to deliver by working only with managed clients. We prize both teamwork and individual accountability. Hard work is rewarded and is balanced with personal time. We are committed to growth through aggressive sales and marketing and to longevity through sound fiscal management. Come join our growing team in a fun and dynamic work environment. We offer excellent opportunities for professional development.

Job DescriptionCloud and Storage Engineer Employment Type: Full-Time, Experienced Department: Information technology CGS is seeking a Cloud and Storage Engineer to develop and implement full-scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in support of a large federal agency. The ideal candidate will be able to excel in a fast-paced environment and successfully produce standards and implementation processes for storage configuration, optimization, replication, and storage security. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Develops and implements full scale Storage Area Network (SAN) architecture for a large EMC-based SAN infrastructure in a multi-enterprise, complex, geographically dispersed solution; ranging from single servers to multi-tier, multi-platform solutions connected through fiber channel to multiple EMC Storage Arrays with petabytes of storage capacity. - The SAN architecture considers the following aspects relating to SAN: performance, capacity, replication, disaster recovery, backup disk storage, and backup & recovery.- Defines and sets a strategic direction for the SAN and backup environment. - Designs and implements customer storage requirements into an enterprise solution that will be developed, installed, configured, and deployed in the environment. - Provides overall storage and backup capacity planning, and utilization reporting. - Produces standards and implementation processes for storage configuration, optimization, replication, virtualization, storage security, and disaster recovery.- Troubleshoots complex SAN infrastructure issues and works with customers both internal and external to effectively resolve issues.- Reviews, plans, and participates in executing regularly scheduled maintenances and/or projects on the storage infrastructure. - Develops technical documentation, tiered storage and storage-as-a-service roadmaps, presentations, and cost models.- Responsible for managing, maintaining, and developing the SAN infrastructure as part of a team to ensure 24/7/365 uptime. - Architects and maintains private cloud environment. Professional experience with Gov Cloud (AWS, Azure, etc.) and hybrid cloud architectures desired. - Performs security related tasks which include, but are not limited to, documentation, vulnerability scan review, assessment support, patch management, and auditing as required. Qualifications:- Bachelor’s in computer science, business, or other relevant discipline.- Eight (8) years of relevant work experience may be substituted for degree requirement.- Must have significant, direct experience in Dell EMC products such as OneFile System (OneFS), MDS SAN switches, storage arrays (Unity, Isilon, VNS, and Data Domain), and RecoverPoint. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: ABOUT EPSILON Epsilon is one of the best known and most respected environmental consulting firms in the northeast United States. Epsilons client base includes major energy, commercial real estate, aviation, institutional and residential developers, as well as local and state public agencies.As a well-established, mid-sized firm, we are large enough to support our team members professionally and personally, and small enough to keep our focus on project successes and client satisfaction. Epsilon is privately held by its Principals, who are experts in their fields and work side-by-side with staff of all levels on complex, high-profile and interesting projects.A recipient of a Greater Boston Chamber of Commerce Award for Business Excellence, Epsilon has also been recognized twice as one of the Boston Business Journals Fifty Best Places to Work. For additional information on the firm, please visit www.epsilonassociates.com. POSITION SUMMARY Epsilon is seeking a full-time senior scientist or engineer to work as part of the Epsilon team on a wide range of environmental licensing, permitting and compliance projects. This position will encompass work primarily in the Acoustics Group. In the Acoustics Group, the candidate will manage multiple projects simultaneously and have the opportunity to represent the company at public meetings. Primary tasks include project management, leading sound level measurement programs, sound level modeling, and report preparation. This position requires periodic fieldwork as well as overnight, out-of-state travel for renewable energy projects. PREFERRED QUALIFICATIONS AND REQUIREMENTS The ideal candidate will have: • 7-12 years of experience in a consulting environment,, • BS. or B.A. in Acoustics, Engineering, Environmental Science, or Physics,, • Experience in conducting community sound level impact assessments in NY, • Experience in using sound level measurement equipment,, • Experience with the CadnaA modeling software,, • Superior written and verbal communication skills,, • Experience in presenting technical material to clients, agency staff, and/or regulatory boards, and, • Ability to work cooperatively as part of a multidisciplinary project team The successful applicant will also have strong organizational skills, be detail oriented, and have project management experience. Experience in the energy industry, materials handling business, and transportation/FHWA TNM modeling is a plus. In addition, experience in noise control engineering is preferred. In addition to the Preferred Qualifications, the Candidate must have a valid drivers license to operate a motor vehicle for business travel, including proper insurance and registration and have all necessary paperwork to work in the USA. PHYSICAL REQUIREMENTS FOR THE JOB The Candidate must: • be able to work safely outside in variable weather conditions for an extended period of time, as necessary,, • work on a computer for extended periods of time,, • be able to travel outside of the state via plane or car, for extended period of time, and, • be able to carry approximately 50 pounds on either paved paths, trails, or in fields. SALARY RANGE NEW YORK STATE Epsilon's pay range for the base salary of this position is $90,000 - $125,000 per year. This salary is commensurate with experience. Epsilon Associates, Inc. reserves the right to pay outside of this range dependent on job related factors including but not limited to credentials, experience, skill, and geographic location. WORKING CONDITIONS IN WHICH THE DUTIES ARE PERFORMED Epsilon maintains a professional office located in Albany, NY. Office space is recently renovated, clean, quiet, and friendly. Our team members enjoy regular opportunities for professional growth, a relaxed and flexible work environment, a competitive base salary, a 401k plan with a generous company match, profit sharing, an annual performance bonus program, and a full benefits package. Epsilon is an equal opportunity employer that recognizes the value of a diverse workforce. We ensure a workplace that supports and encourages creativity, professional growth and a company culture that promotes diversity, inclusion and overall employee health and well-being. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, gender identity or expression, national origin, sexual orientation, disability and/or protected veteran status in accordance with governing laws. Epsilon Associates, Inc. is an EEO/Disability/Vets Employer Applicants must have all necessary paperwork to work in the USA.

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • Mentor junior staff and support their technical development.Requirements: What You Bring, Your Expertise as a Highway Project Engineer • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Salary Range $95,000-$135,000 annually Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking recent technical graduates who want to join a leading life science automation company providing custom automation systems for the rapidly growing Biotech industry. As an Engineer I, You Will: • Design and implementation of PLC and DCS based control systems, • Work cooperatively with engineering, design, production, and field service staff, • Be responsible for aspects of project budget and schedule requirements, • Perform functional testing of electrical and control systems, • Design and configure PLC/SCADA networks, • Generate and implement test procedures, • Participate in field start-up testing of electrical and programmed control systems, including loop checks, drive setup, installation inspection, operational readiness testing, and functional acceptance testing., • Be an ambassador who embodies our Core Values, prioritizing the success of E Tech Group, our clients, and the professional development of our associates. You Have: • BS Engineering or Computer Science degree or equivalent educational background, • Ability to solve software and data communication problems, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and personal/sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job DescriptionONLY CONSIDERING CANDIDATES WITH 5+ YEARS OF EXPERIENCE WHO RESIDE WITHIN A COMMUTABLE DISTANCE TO ALBANY, NY- NOT OPEN TO RELOCATION “Join GD Resources for dynamic opportunities in business management and IT, where innovation meets excellence.” About the Company: GD Resources is a Veteran Women-Owned Business Management and Information Technology company committed to excellence. GD Resources provides dynamic opportunities for veterans and professionals alike to contribute to innovative projects and drive success in a collaborative and supportive environment. Join us to make a difference, advance your career, and grow with a company that values integrity, diversity, and continuous improvement. Job Title: Senior Network Architect Task Order: HBITS-07-14336 Agency: State of New York – Office of Information Technology Services (ITS) Location: Hybrid – Albany, NY Duration: 24 Months Rate: Depends on experience Position Overview This HBITS role designs, builds, and supports large-scale, secure enterprise networks for State of New York operations. You’ll architect solutions aligned to NYS ITS technical/security standards, troubleshoot complex LAN/WAN issues, and guide field deployments. Deep experience with Cisco (IOS), routing (OSPF/BGP), VPNs (DMVPN/IPSEC), Wi-Fi platforms, and automation (Python/Ansible) is essential. Responsibilities • Architect network solutions that meet business needs and NYS ITS technical/security standards., • Troubleshoot and optimize LAN/WAN hardware for DOL; analyze logs, performance, and security., • Coordinate vendor and agency installs/configurations; pre-configure field devices., • Review existing architecture; recommend upgrades/replacements with detailed specs., • Provide L3 support for enterprise environments and update inventory in agency systems., • Enforce ITS security/technology policies; remotely guide technicians on installs/maintenance. Qualifications • 5 years experience configuring and troubleshooting LAN Networking equipment in a complex networking environment of at least 1,000 remote endpoints that includes switches, routers/firewalls and VPN devices. This includes troubleshooting issues using protocol analysis tools (i.e. Wireshark) and conducting in-depth analysis on network data captures., • 5 years of experience in network engineering, configuring and troubleshooting DMVPN, IPSEC, OSPF, and BGP to support secure enterprise connectivity., • 5 years experience with Cisco hardware and Cisco IOS software in a complex TCP/IP environment including routing, port forwarding/NAT, VPN management., • 5 years experience supporting and configuring wireless network equipment from vendors such as Cisco/Meraki, Ubiquiti, Aruba., • 5 years experience working with network automation tools and scripting languages, such as Python and Ansible. Required Documents • Résumé, • Copy of candidate identification (driver’s license, passport, visa if applicable), • Degree/certifications (if applicable), • Three professional references, • Completed Form 2 GDR is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law. We are committed to equal opportunity in all aspects of employment, including hiring, promotion, compensation, and benefits. Powered by JazzHR ZIoJmoBszx

Job Description At-a-Glance: Are you ready to build your career by joining a certified technology solutions and compliance consulting services company? If so, our client is hiring an API Manufacturing Engineer. Position Type: • Contract, • On-Site Required: • Previous hands on experience in: API Manufacturing., • Experience performing deviation investigations in GMP environments., • Shop floor manufacturing experience., • Strong root cause analysis and investigation skills., • Good technical writing/documentation skills., • Experience with CAPA activities., • Experience supporting manufacturing/process troubleshooting. Nice to Have: • Quality Operations experience., • QC chemistry lab experience., • Aseptic manufacturing experience., • Batch investigation experience., • Backlog investigation remediation experience. Responsibilities: Main Responsibilities: • Lead deviation investigations from initiation to closure., • Perform root cause analysis using tools such as:, • o 5 Why o Fishbone o 6M o Cause & Effect Analysis • Write clear and well documented investigation reports., • Support CAPA definition, implementation and effectiveness checks., • Support backlog investigation remediation activities., • Work closely with Manufacturing, QA, QC and technical teams during investigations., • Update SOPs and GMP documentation when required.

Job Description BCA WORKS FOR YOU BCA is a team of architects & interior designers, engineers, and industry professionals working across New York State on the projects communities rely on most - schools, hospitals, public spaces, and infrastructure. We have offices in Binghamton, Ithaca, Rochester, Saratoga Springs, Syracuse, Troy and Watertown, and we work as one firm across disciplines and geography. We hire experienced people because we need what they bring. In return, you'll have real ownership of your work, colleagues who are approachable and generous with what they know, and a firm that's serious about where it's headed. We're a firm that's intentionally evolving, and the experienced people we hire are a part of how that happens. We're not the finished product - but that's part of the point. If you want to be part of building something, BCA is a place where that's actually true. JOB SUMMARY: The Electrical Engineer I supports the electrical team in the design and development of building systems under the guidance of the Manager of Electrical Engineering and project leadership. This role contributes to developing Revit models and construction documents, while assisting with coordination, technical documentation, and construction administration activities throughout all phases of a project. REPORTS TO: Project Manager/Manager of Electrical Engineering SUPERVISES: No supervisory duties. ESSENTIAL FUNCTIONS: • Supports the electrical team in the design and documentation of building systems., • Assists in producing electrical BIM models relative to compliance with office standards for graphics, model structure, and data management., • Assists with production of electrical drawings and documentation (Revit primarily, AutoCAD as needed), • Assists with electrical load calculations, circuiting, and lighting calculations, • Assists with preparing and/or obtain electrical equipment selections., • Prepares clear, complete, and constructible electrical details., • Assists with editing of project specifications., • Assists with cost estimating for all electrical aspects of the project., • Assists with High Performance Design (LEED, CHPS, etc.) when part of project objectives., • Assist with construction administration activities, including submittal review and RFI responses. EDUCATION & EXPERIENCE: • Associates or Bachelor’s degree in Electrical Engineering or 5+ years of experience in the electrical engineering field., • Bachelor’s Degree and IE certification preferred. KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of the basic principles of electrical engineering., • Experience with BIM software, Revit preferred., • Experience with AutoCAD software., • Experience with specification software, SpecLink preferred., • Experience with Microsoft Office, Bluebeam, NewForma or similar., • Knowledge of Building, Energy and Electrical codes, • Knowledge of modern building construction methods and materials and of the preparation of specifications., • Excellent verbal and written skills, including ability to present to others in small and large group formats., • Excellent project management skills, with ability to multi-task and handle competing priorities effectively, while delivering quality work on time., • Excellent analytical and critical thinking skills, with a priority on cost effectiveness and client satisfaction. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job DescriptionIT Systems ArchitectEmployment Type: Full Time, Mid levelDepartment: Information Technology As an IT Lead System Architect for CGS, you will lead multiple teams consisting of developers, subject matter experts and stakeholders to convert the business requirements, process workflows, and use cases into a fully functional application. You will use an enterprise level vision and be responsible for mentoring and empowering the application development teams. As the PEGA architect you will assist in the development and review of technical deliverables. A successful candidate will have the ability to establish standards, develop repeatable processes, and design reusable components. A key role for this job is to assist in project planning, including development of timelines, composition of technical teams, and leveling of resources. CGS brings motivated, highly skilled, and creative people together to solve government’s most dynamic problems with cutting edge technology. To carry out our mission, we are seeking candidates that are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Act as the liaison between Lead Business Architect and ITO PEGA teams and have ability to translate between technical and nontechnical team members- Work closely with Business Product Owners and Stakeholders, Lead Business Analysts to translate the business requirements to application- Participate in Agile software development sprints and sprint planning activities- Define solution acceptance criteria and assist in software testing- Publish software release notes and maintain other product documentation- Mentor Software Development team members as needed- Participate in and provide support to customer success teams- Capture functional software requirements and translate into user stories Qualifications:- Bachelor’s Degree in Computer Science or related field - 4+ years of experience with PEGA Smart BPM - 4+ years of experience with Case Development- 4+ years of experience as a PEGA Business Architect - 4+ years of experience in managing software functional requirements throughout the SDLC- 4+ years of experience with Agile Software Development - 4+ years of experience in documentation of requirements, test cases, and training material- 4+ years of experience in leading test execution - 4+ years of experience in configuration and deployment of software solutions at the enterprise level- Strong communication skills - Experience in an organization that develops and delivers software to customers Our commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting edge technology with world-class personnel to deliver customized solutions that fit our clients’ specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years we’ve been growing our government-contracting portfolio, and along the way we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of meaningful government innovation! Explore additional job opportunities with CGS on our Job Board: https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCloud Systems Architect Employment Type: Full-Time, Mid-levelDepartment: Information Technology We are seeking a Cloud Systems Architect with experience with cloud infrastructure to engineer and support public, private and hybrid clouds. The ideal candidate will be proficient in a variety of cloud hosts including Amazon Web Services and Microsoft Azure at a minimum. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- The candidate will be knowledgeable of the most recent updates and developments and act as an advisor to our customer in reference to the cloud management strategies to be employed to take advantage of the benefits offered by cloud computing such as being able to function without any restrictions to the workload, initiate as many workstations as necessary per time period and pay only for what they actually use. - The candidate will also work with the IT Security team to manage and maintain cloud systems security of the data and network resources. - The candidate will also be responsible for engineering on customer premise applications and systems interconnected to cloud resources. - Designs and defines system architecture for new or existing complex computer systems. - Determines systems specifications, input/output processes, and working parameters for hardware/software compatibility and maintenance of system security. - Coordinates design of subsystems and integration of total system. Identifies, analyzes, and resolves program support deficiencies. - Develops and recommends corrective actions. - May provide technical guidance for database administrators and software developers. Qualifications:- Experience with and a complete understanding of the technology required for cloud computing.- Experience with the skills to migrate applications to the cloud.- Be able to build relationships between the customers and the team members.- The ability and the knowledge to integrate services and tools to any and all areas to be used such as networks and data processing.- The ability and the knowledge to implement security information and event management to keep the customer's assets safe.- Experience with meeting or exceeding the requirements of cloud provider service-level agreements Experience with AWS and Azure.- Knowledge of a multitude of programming languages including Python, PHP, Java, Node and Ruby on Rails.- Typically a Bachelor's Degree and 6 years work experience or equivalent experience. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation! Explore additional job opportunities with CGS on our Job Board:https://cgsfederal.com/join-our-team/ For more information about CGS please visit: https://www.cgsfederal.com or contact:Email: info@cgsfederal.com #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Albany (Latham), NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams. Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, industrial, commercial, and other unique projects. This role can accelerate your career goals through immediate opportunities to lead in a creative friendly environment, and comes with a competitive starting salary, incentive compensation, and a comprehensive benefit package. Salary Range: $62,000 - $105,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Duties • Determine structural loading criteria, perform complex design calculations, and prepare structural specifications., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Produce construction documents using Revit (BIM)., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Requirements • Qualified candidates must have a Bachelor of Science degree in Civil Engineering with structural coursework., • Engineering in Training Certificate (E.I.T.) required., • Master of Science degree in Structural Engineering is preferred., • 0 to 10 years of experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.