Trabajos test manager en Medford, New YorkCrear alertas

Job Description Dietary Cook Luxor Nursing and Rehabilitation at Mills Pond is actively seeking a Part Time Cook to work at our Skilled Nursing Facility in St. James, NY. DUTIES: Essential Duties and Responsibilities: Prepare and cook meals according to posted menus, standardized recipes, and diet orders. Ensure meals are prepared on time and served at the proper temperature and consistency. Follow therapeutic and modified diet guidelines as directed by the Dietitian or Dietary Manager. Taste-test food for quality, flavor, and appearance before service. Maintain a clean and organized work area at all times. Ensure compliance with all food safety, sanitation, and infection control standards. Properly store and label all food items; monitor refrigerator and freezer temperatures daily. Assist with receiving, rotating, and storing food and supplies. Minimize waste through proper portion control and inventory practices. Clean and sanitize kitchen equipment, utensils, and food preparation areas. Work cooperatively with other dietary staff to ensure timely and efficient meal service. Follow all safety policies and report unsafe conditions or equipment immediately. Attend required in-service training and staff meetings. Perform other duties as assigned by the Dietary Manager. REQUIREMENTS: • High School Diploma or Equivalent, • Must be able to do some physical work, • Experience in Food Service is a requirement, • Positive attitude and energy is a must!, • Ability to work effectively as a team member About Us: Luxor Nursing and Rehabilitation at Mills Pond is a state-of-the-art facility providing long term and short term stay with dedicated quality care. We work tirelessly to make sure your loved ones are cared for across all levels of rehabilitation. Our pledge to the community, our residents, and the staff is to provide post-acute-care in a manner that sets the standard of excellence and strive to meet and/or exceed the expectations of our residents, staff, and all we come in contact with. Equal Opportunity Employer - M/F/D/V #boost

Job Description With over 58 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position Overview As a Culinary Lead at Sur La Table, you play a key role in the success of the store by inspiring customers throughout every stage of their culinary experience by combining culinary expertise, business acumen, and teaching skills. This role supports the culinary program, drives sales, delivers a #bestincenter customer experience, a company-wide standard for excellence in service, and helps build and manage a high-performing culinary team. Key ResponsibilitiesLeadership & Team Development · Supports the recruitment, training, and ongoing development of a high-performing team to meet the culinary business needs. · Lead, coach, and inspire associates to exceed performance expectations and uphold a positive team culture. · Provide in-the-moment coaching and feedback to elevate performance and team engagement. Communicate performance issues directly to the General Manager/Store Manager. Customer Experience & Brand Representation · Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources. · Ensures an outstanding cooking class experience in every session by following provided recipes and game plans while holding employees accountable for quality and execution. · Work with store leadership to increase foot traffic and store engagement through cooking classes and private events. · Ensure exceptional customer experience by leading a customer-focused, Guest Obsessed culture in both the kitchen and retail sales floor. Sales & Business Performance · Assist with driving sales growth by implementing strategies to enhance the culinary and retail business. · Analyze key performance metrics daily and leverage insights to optimize store performance. · Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews. Operations & Compliance · Ensure compliance with food safety standards, local health codes, and sanitation regulations. · Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment · Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses. · May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions. · Ensure store safety and cleanliness, addressing any maintenance needs promptly. · Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy. · Models and ensures all Sur La Table policies and standard operating procedures (SOPs) are communicated effectively to associates, maintained and consistently followed. Physical Requirements · Ability to communicate verbally and work cooperatively with associates and customers. · Ability to remain standing for up to 4 hours at a time. · Ability to move about the store coaching and directing associates and/or class participants while selling to customers. · The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose. · Ability to grab, reach, push, pull, bend, stoop, kneel, and crouch to retrieve and replenish merchandise from stockroom or sales floor. · Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques. · Ability to lift and/or move merchandise weighing up to 50 lbs. · Ability to ascend/descend ladders to retrieve and/or move merchandise. · Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work. · Workweeks are expected to be between 20 and 25 hours with the ability to have a flexible schedule, including nights, weekends, and holidays. · Regular and predictable attendance with the flexibility to adjust class assignments based on demand, ensuring 3-4 classes are taught per week. · Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience · Must be 21 years of age or older at the time of employment. · A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education. · 1-2 years of progressively responsible kitchen management experience. · Valid Food Manager Certification. · Excellent communication, problem-solving, and decision-making abilities. · Passion for community engagement and providing exceptional customer experiences. · Proficiency in Microsoft Office Suite and retail systems preferred. This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Washington state applicants only: If you believe that this job posting does not comply with applicable Washington state law, please notify us by sending an email to WACandidates@cscshared.com. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact hrbenefits@cscshared.com. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description JOB TITLE: Line Packer OPEN SHIFTS: 2nd, 3rd shift (10 on each) PAY RATE 2nd: $18.00 (2pm-10pm) PAY RATE 3rd: $19.50 (10pm-6am) APPLY TODAY! We are seeking Line Packers to join the team immediately. Under the general supervision of the Machine Operator, Area Leader, Production Supervisor and/or Plant Manager; the General Production Worker will be responsible to follow directions for various plant tasks to ensure good quality products are efficiently manufactured at all times. Responsible for performing various general plant tasks; packaging, feeding product to the line and/or packaging, making boxes, applying tamper seals, closing lids, etc. that help to ensure good quality product is produced at all times Responsible for performing any task that will be associated with the assembly or packaging of the product. Responsible to perform the job responsibilities of a back-up Machine Operator for coverage purpose from time to time. Responsible for practicing and adhering to Food Safety, GMP’s (Good Manufacturing Practices) and Health and Safety policy at all times. Responsible for practicing and adhering to plant policies and best practices. Responsible for following plants core values; Respect, Direct Communication & Quality. Responsible for other reasonable duties as assigned by the Area Leader/Supervisor and/or Plant Manager. Follow company’s health and safety program, rules and procedures and work in compliance with health and safety-related legislation and codes. Report all incidents, injuries, illnesses, and near misses to your supervisor. Use or wear safety equipment and personal protective equipment required by the company. Report to supervisor any hazardous or unsafe conditions, absence or defects in equipment and any contravention of health and safety legislation. Indicate any food safety responsibilities as per the local requirements, as well as noting if a trained backup is required. Quick learner Some technical and/or basic troubleshooting skills Coordination and multi-task skills Ability to follow directions High energy individual Ability to work in a fast paced environment Flexibility to work rotating and/or weekend shift Ability to work in a team-oriented environment Fast paced environment SAFTEY SHOES REQUIRED Pay Details: $18.00 to $19.50 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Intern-Engineering to join our respected and valued team. This position is 100% onsite in our Bohemia, NY corporate headquarters and is a temporary internship. The compensation for this role is $20-$25 hourly based on education/experience. During School Hours: 16 hours Weekly Summer Hours: 30 hours Weekly This position requires a U.S Person or a person who can qualify for a department of state or commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Role purpose (position scope): This is an internship position for the organization’s Engineering Department. The primary role of an intern is to perform technical work within their functional area of study of Electrical Engineering, but may also include special projects that utilize basic engineering skills not solely tied to their degree program. Key Responsibilities: (May include but not limited to:) • Participate in design reviews, • Develop and document technical theory of operations for design work completed, • Develop plans and reports to include charts and graphs., • Basic circuit design, circuit analysis, schematic capture tools and simple PCB design., • Trouble shooting with common lab equipment, • Basic electronics assembly and soldering, • Part selection and bill of material development, • Design and write software code for products or testing., • Assemble cables or prototypes., • Comply and uphold Power Device SHE policies and standards., • Comply with the Power Device Code of Business Conduct and Ethics, • Other duties as assigned by manager Core Competencies: • Excellent organizational skills, • Must be knowledgeable with typical computer programs such as MS Office., • Must possess basic knowledge of their particular degree program., • Must be able to write proficiently with emphasis on technical documentation, • Scientific charting and graphing with MS Excel, • Experience with basic test equipment (i.e. DMM, Oscilloscope) commensurate with degree program, • Critical thinking and be able to work independently and cooperatively., • Leverage generative AI tools (such as ChatGPT) and automation workflows to streamline routine engineering tasks, analyze technical data, and accelerate daily productivity., • Positive attitude Level I – Entry (Inexperienced) • KNOWLEDGE – Limited use and/or application of basic technical principles, concepts and practices., • JOB COMPLEXITY – Works on problems of limited scope. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained., • DISCRETION/LATITTUDE - Work is closely supervised. Follows specific, detailed instructions., • MINIMUM EDUCATION & EXPERIENCE – Enrolled in an Electrical Engineering, technical or scientific program (or similar related degree program for project management) Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Come join our team. We are looking for a leasing consultant for multi-family property located in Brookhaven. Competitive salary and benefits. The purpose of the Leasing Consultant is to lease apartments, retain residents through customer service, and handle administrative and financial responsibilities for their assigned community. Salary range from $24-25/hour. Primary Functions: I. Leasing Responsibilities: Ensure leasing procedures are followed on a daily basis. Manage availability guidelines. Review leasing follow up weekly. Receive incoming phone calls from prospects in a professional and welcoming manner and entice them to visit the community. Check the answering service for messages and follow up on all messages, as necessary. Visually inspect entire property (office, models, compactor, vacant units and amenity areas) daily for cleanliness and overall appearance. This can include, but is not limited to, picking up trash off the ground, operating the trash compactor, carrying cleaning supplies and/or vacuum up or down stairs to apartment homes, as well as cleaning apartments to bring to resident ready standards. Lease apartments to qualified prospects. Schedule move-ins in such a way as to minimize rent loss. Escort a future resident to an apartment home and to all amenity areas. Drive a golf cart or walk with prospects. Prepare all paperwork needed before submitting lease files for verification. Verify applications and process file quickly through phone calls and correspondence. Submit to manager for approval. Set up file for move-in. Turn in traffic and phone recap weekly to the Community Director. Follow up with each visitor within 24 hours via personal phone call and send a personal note/e-mail for them to receive within seven days of their visit. Any other projects or assignments given by Community Director or Regional Director. General Office/Administrative Responsibilities: • Conduct move-in, move-out and turnkey inspections and follow through with any concerns., • Maintain key closet procedures to ensure proper control of access and security on the property., • Receive and acknowledge resident notices and prepare files., • Maintain dress code as outlined in the policy manual and ensure Leasing Team adheres to the policy and uniform schedule., • Assist in Lease renewal procedure by: i. Completing lease renewal printout and submitting to Community Director for approval. ii. Contacting each resident by phone prior, to 75 days before the end of their initial term. iii. Sending renewal letters to those residents you are unable to reach by phone. iv. Typing new leases. v. Following up on any promises made at time of renewal. • Assemble move-in packages., • Keep all filing current., • Operate office alarm system in conjunction with opening and closing the office., • Deliver thorough move-in presentation to new residents., • Calculate daily rent, prorate charges, late fees and percentages., • Write up all maintenance requests upon receipt. V. Qualifications: A. Special Skills Required 1. Ability to effectively communicate with people, 2. Ability to maintain a professional image, 3. Strong organizational skills, 4. Strong verbal skills, 5. Excellent customer service orientation, 6. Assertive attitude, 7. Ability to effectively "close" a sale, 8. Must take and pass drug screening test, 9. Ability to manage and coach team of Leasing Professionals, 10. Must possess a valid Driver's License B. Knowledge 1. Experience in leasing properties to perspective residents and managing current residents. Experience using Knock, Onesite, and AIRM. REPORTS TO: Community Director, Assistant Community Director JOB CLASSIFICATION: Non-exempt. Paid coefficient overtime for all hours worked over 40 each week. EEO/AAP Our commitment to diversity and inclusion is helping us to create not only a great place to work, but also an environment where our employees, our residents and our communities can reach their goals and connect with each other. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or protected veteran status. We are an Equal Opportunity, Affirmative Action employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. This PDF document was created with CKEditor and can be used for evaluation purposes only. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to finger, type, handle or feel objects, talk, and hear. The employee is frequently required to stand; walk; reach with hands and arms, climb, stoop, and squat. The employee is intermittently required to sit. Incumbents must be able to physically access all exterior and interior parts of the property and amenities. Leasing Professionals must be able to push, pull, lift, carry, or maneuver weights of up to twenty (20) pounds independently. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Understanding of Job Essentials: I acknowledge that I have read and fully understand the above requirements, which are part of my job responsibility as Leasing Professional for Titan Corp. I also certify that I am able to perform these duties. I understand Titan Corp has the right to amend or revise, as necessary, the job description for this position. I understand that all pre-employment screening activities are conducted in compliance with federal and state employment laws. Background checks are completed during the post-offer stage of the employment process in compliance with the Fair Credit Reporting Act requirements. I also fully understand the content of this job description, have had the opportunity to ask questions regarding this job description, and have had the job duties and responsibilities, requisites, and physical demands and working conditions explained to me. I am capable of performing the essential functions of this job with or without reasonable accommodation. If I need accommodation, I will ask the hiring manager for it

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 3-5 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description With over 58 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position Overview As a Chef Instructor, Pastry at Sur La Table, you are the in-store expert and advocate for all things baking and pastry arts. You deliver #bestincenter service, a company-wide standard for excellence in service, by sharing specialized knowledge in pastry techniques, baking fundamentals, and personalized instruction that supports all company initiatives. The Chef Instructor, Pastry plays a key role in inspiring a love for baking while driving sales of bakeware, mixers, and decorating tools through hands-on pastry classes and engaging culinary instruction. Key ResponsibilitiesCustomer Experience & Brand Representation · Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Deliver an exceptional in-store culinary experience focused on pastry and baking classes that reflects Sur La Table’s passion for food, teaching, and high standards, while following the provided recipes and game plans to ensure consistency and quality. · Communicate technical concepts and advanced pastry skills in a clear, encouraging, and approachable manner. · Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources. Sales & Business Performance · Drive sales by upholding kitchen standards, encouraging second class sign-ups through strong customer engagement, and promoting retail items used or featured in class. · Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates. · Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews. Team Engagement & Store Support · Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations. · Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations. · Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readiness. Operations & Compliance · Ensure compliance with food safety standards, local health codes, and sanitation regulations. · Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment. · Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses. · May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions. · Ensure store safety and cleanliness, addressing any maintenance needs promptly. · Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy. · Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements · Ability to communicate verbally and work cooperatively with associates and customers. · Ability to remain standing for up to 4 hours at a time. · Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor. · The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose. · Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment. · Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques. · Ability to lift and/or move merchandise weighing up to 50 lbs. · Ability to ascend/descend ladders to retrieve and/or move merchandise. · Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work. · Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs. · Regular and predictable attendance with the flexibility to adjust class assignments based on demand. · Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience · Must be 21 years of age or older at the time of employment. · A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education. · 1-2 years of kitchen operations experience. · Valid Food Manager Certification. · Excellent communication, problem-solving, and decision-making abilities. · Passion for community engagement and providing exceptional customer experiences. This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Washington state applicants only: If you believe that this job posting does not comply with applicable Washington state law, please notify us by sending an email to WACandidates@cscshared.com. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact hrbenefits@cscshared.com. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." Total Rewards: Competitive base salary + uncapped commission. Year 1 On-Target Earnings: $60,000+ Top Earner Potential: $100,000+ per year What do our Pest Control Consultants do? The primary purpose of this role is to sell the company's industry leading pest management services and products to new and existing residential customers, while maintaining a customer-focused service to grow the business. You’ll be the face of our national brand to your local community, and your clients will count on you to protect their homes and their families. This includes assessing customers' needs by consulting with the customer and performing an analysis using expert knowledge of the company's products and services that result in the sales of the organization's pest control solutions. Responsibilities include but are not limited to the following: Visually inspect homes for pests, pest harborage, pest entries, etc. Based on assessment findings, sell pest control solutions as well as preventative maintenance for residential customers Collaborate with our Customer Service Center, Inside Sales department, and Technicians for increased opportunities Partner with Branch Manager to identify revenue streams with our current base and service specialist engagement Develop proposals for customers to resolve existing pest issues while also proposing additional enhancements to pest household services Complete Home diagram using Sales CRM and provided to ensure clear understanding of customer home and possible challenges Follow up on past proposals to close sales opportunities Provide expert knowledge to new service installations to ensure the job is completed satisfactorily Complete daily activities and sales performance using the company sales CRM Essential Job Functions: We’re not going to sugarcoat it. The essential functions of this job have some physical demands (of course, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Here’s what we mean: You’ve got to be able to move up to 10 lbs. regularly and 11–20 lbs. frequently, whether that’s lifting, carrying, pushing, pulling, or otherwise repositioning objects You’ll move around a lot — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. You’ll go up and down stairs, ladders, scaffolding, ramps, and poles. And you’ll need to keep your balance when walking, standing, or crouching on narrow, slippery, or moving surfaces. (You’ll definitely get your steps in.) You must be comfortable dealing with different pests (spiders, flies, mosquitos, rodents, etc.), as well as being required to go into small spaces such as basements, crawl spaces, attics, etc. Sometimes you’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you’ll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (you know, where critters live) What do you need? High school diploma or equivalent Strong social, customer service, and communication skills — in fact, we’d be really impressed if you came to this role with related experience and/or training in sales. Prefer at least 1-2 years of pest technician or sales experience Travel up to 100% of time within assigned territory(s) #ZipSales Base Pay RangeHourly: $22.00 - $29.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. \nCompany Description For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee. For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee.

Job Description TIMEPROOFUSA was founded by some of the home remodeling industry's most respected leaders. We have quickly become America's fastest-growing home improvement company—providing roofing solutions to homeowners across the country. Our rapid growth is driven by one mission: to deliver uncompromising quality, dependable service, and lasting peace of mind to every customer we serve. As an Outside Sales Representative, you'll run pre-set, qualified appointments, educate homeowners on our roofing solutions, and close projects in-home. $4,000 SIGN-ON BONUS What You'll Do • Run pre-set, qualified appointments with homeowners—no cold calling or lead generation required., • Conduct professional roofing consultations, product demos, provide same-day estimates, and close the sale., • Partner with your Sales Manager and team for ongoing coaching, joint appointments, weekly meetings, and skill development. What's In It for You • 100% commission W-2 role with uncapped earnings + monthly bonuses., • On target earnings between $150K–$320K+ annually., • Pre-set qualified leads—focus on closing, not prospecting., • 4 weeks paid training at $1,000/week, plus earn full commission — not a draw., • Full benefits: medical, dental, vision, 401(k)., • $4,000 Sign-On Bonus, • Monthly car allowance, • Cell phone allowance & company provided iPad What It Takes To Succeed • Resilience and ability to handle rejection without being discouraged., • Ability to drive 100 miles a day on average., • Availability to work evenings and weekends., • Comfortable working in a commission-based role., • Strong ability to navigate complex conversations and close deals on the spot., • Technological proficiency in using an iPad., • Submit to a background screening., • Valid driver's license and vehicle insurance. More About TIMEPROOFUSA TIMEPROOFUSA is redefining the future of roofing. With fire-safe materials, sustainable technology, and a leadership team backed by decades of success in home remodeling, we're building smarter, safer homes that stand the test of time. Our core values—People First, Innovation, Customer Obsession, Integrity & Craftsmanship, and Profit Fuels Our Future—aren't just words on a wall. They drive how we build, lead, and win together. If you're the kind of person who thrives on challenge, takes pride in excellence, and wants to be part of a team that's changing the industry, this is your moment. Apply today, take the next step in your career, and let's build something extraordinary together.

Job Description SUMMARY Ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. ESSENTIAL DUTIES include the following. Other duties may be assigned. Recruits, and motivates qualified service technicians. Assists technicians in developing their skills. Understands, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Understands and ensures compliance with manufacturer warranty and policy procedures. Ensures that all department employees receive appropriate manufacturer training. Conducts regular performance reviews for all technicians in accordance with dealership guidelines. Test drives the vehicle with customer as needed to confirm the problem or refers to test technician. Prioritizes and controls all comebacks to ensure proper and prompt attention. Ensures that all repairs are assigned to technicians in an equal and fair manner. Provides technical support for technicians when necessary. Ensures repairs are charged out correctly. Checks progress of each repair order throughout the day. Maintains high-quality service repairs and minimize comebacks. Conducts periodic spot checks of completed jobs for thoroughness and quality. Road tests vehicles to quality-check work performed. Accounts for all documents; ensures that none are missing and all are processed correctly. Establishes and maintains customer follow-up program to confirm satisfaction with the service experience. Handles all customer complaints within 24 hours, informing other managers as appropriate. Manages department performance using tools such as the daily operating control (DOC), efficiency and productivity control, comeback reports, warranty reports, telephone surveys, and monthly forecasts. Monitors technicians' daily productivity reports and corresponding payroll records. Monitors shop condition, including cleanliness, safety, and the condition of shop equipment. Reports problems to the service manager or dealer. Ensures the proper care, storage, and inventory of special tools. Prepares a list of needed service department equipment, supplies and required repairs, and reviews with the service manager as needed. Keeps abreast of new equipment and tools available and recommends purchases. Fills in for service advisor and dispatcher when necessary. Attends managers meetings as requested. Strives for harmony and teamwork within the department and with all other departments. Maintains safe work environment. Maintains professional appearance. SUPERVISORY RESPONSIBILITIES Shop technicians QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE 10 years shop experience Customer satisfaction experience LANGUAGE SKILLS English CERTIFICATES, LICENSES, REGISTRATIONS State Inspection License Commercial Drivers License PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to perform repairs when necessary. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Core Responsibilities: • Repairs: Conduct routine inspections, identify repair needs (including planned and emergency related repairs) and promptly address any issues related to the hotel's physical infrastructure, including fire/life safety, mechanical (HVAC, plumbing, controls), electrical (lighting, UPS, PDU, generators, primary switch gear), emergency backup systems and hot water system, high pressure boiler units, mechanical systems as well as all work associated with said repairs including relevant demolition, reconstruction, and cleaning of work area. Perform complex repairs, troubleshoot problems, and coordinate with external contractors when necessary., • Preventive Diagnostics and Repairs: Develop and implement a comprehensive preventive diagnostic program to ensure the optimal functioning of all equipment and systems within the Casino/ hotel. Regularly inspect and service equipment, follow manufacturer guidelines, and maintain accurate records of repair activities including all elements associated with diagnosis and repairs. Make recommendations to the Facilities Sr. Manager and Director for replacement should maintenance of equipment is nearing life cycle end or is becoming inefficient., • Safety and Compliance: Maintain a safe and secure environment for guests and employees by adhering to all relevant safety regulations, building codes, and industry standards. Conduct regular safety inspections, address potential hazards, and ensure the proper functioning of fire protection systems, emergency lighting, and other safety equipment. Work with Facilities Sr. Manager and Director to improve processes and develop industry leading safety protocols., • Team Collaboration: Collaborate closely with the hotel's management, operations, supervise outside contractors, as well as maintenance staff to address maintenance concerns, prioritize tasks, and provide technical support as needed. Foster a positive and cooperative work environment, encourage teamwork, and provide training and guidance to new staff members., • Record Keeping and Reporting: Maintain accurate records of diagnostic and repair activities, equipment inventory, and maintenance performed. Prepare regular reports on maintenance expenses, project updates, and equipment performance. Assist in budgeting processes by providing insights and recommendations related to engineering and maintenance needs. Utilize Management repair tracking hardware and software and input appropriate metrics as required., • Training: Proactively improve technical skills and stay up to date with new technology through training resources available both internally and externally as well as available through the IUOE training courses to maintain skill sets and licensing, if applicable. Work with leadership to develop Facilities Mechanic I team members to prepare them for more complex work., • Performing routine inspections around the building to identify potential issues such as structural damage, windows, and door issues., • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures including relevant demolition, reconstruction, and cleaning of project staging area as required., • Test and Diagnose the building heating equipment for possible repairs to keep climate control in the facility functioning properly., • Operation of relevant tools and machinery necessary to perform duties as directed. IUOE Facilities Engineers in this role performing work assignments in their course of duties shall perform minor tasks commonly performed by another craft in order to complete the major assignment. For illustrative purposes, such minor tasks include but are not limited to: removing conduit or electrical wiring once an electrician has made sure the power has been turned off during a major renovation assignment; touching up paint, installing molding, repair and painting of retaining walls, doorways, repair of HVAC vents, plumbing related work, as well as any cleanup and demolition required to commence and complete the work assignment. • All other duties as assigned. Qualifications/Requirements: • High school diploma or equivalent degree required., • Minimum of 3-5 years previous experience in general maintenance/repair for commercial facility required., • Must be able to obtain a New York State Gaming License. OTHER • Must have general knowledge of the use of equipment used in building trades., • Strong knowledge of building systems, including electrical, plumbing, HVAC, and mechanical systems., • Familiarity with applicable building codes, safety regulations, and environmental standards, • Ability to understand and follow OSHA guidelines., • Ability to stand, crouch, and climb to perform repairs, use ladders, and perform various types of manual labor., • Ability to lift up to 50 pounds., • Visual acuity sufficient for reading, performing repairs, and painting., • Weekends, Holidays, and swing shifts may be required., • Must be able to obtain a New York State Gaming License.

Job Description Core Responsibilities: • Repairs: Conduct routine inspections, identify repair needs (including planned and emergency related repairs) and promptly address any issues related to the hotel's physical infrastructure, including fire/life safety, mechanical (HVAC, plumbing, controls), electrical (lighting, UPS, PDU, generators, primary switch gear), emergency backup systems and hot water system, high pressure boiler units, mechanical systems as well as all work associated with said repairs including relevant demolition, reconstruction, and cleaning of work area. Perform complex repairs, troubleshoot problems, and coordinate with external contractors when necessary., • Preventive Diagnostics and Repairs: Develop and implement a comprehensive preventive diagnostic program to ensure the optimal functioning of all equipment and systems within the Casino/ hotel. Regularly inspect and service equipment, follow manufacturer guidelines, and maintain accurate records of repair activities including all elements associated with diagnosis and repairs. Make recommendations to the Facilities Sr. Manager and Director for replacement should maintenance of equipment is nearing life cycle end or is becoming inefficient., • Safety and Compliance: Maintain a safe and secure environment for guests and employees by adhering to all relevant safety regulations, building codes, and industry standards. Conduct regular safety inspections, address potential hazards, and ensure the proper functioning of fire protection systems, emergency lighting, and other safety equipment. Work with Facilities Sr. Manager and Director to improve processes and develop industry leading safety protocols., • Team Collaboration: Collaborate closely with the hotel's management, operations, supervise outside contractors, as well as maintenance staff to address maintenance concerns, prioritize tasks, and provide technical support as needed. Foster a positive and cooperative work environment, encourage teamwork, and provide training and guidance to new staff members., • Record Keeping and Reporting: Maintain accurate records of diagnostic and repair activities, equipment inventory, and maintenance performed. Prepare regular reports on maintenance expenses, project updates, and equipment performance. Assist in budgeting processes by providing insights and recommendations related to engineering and maintenance needs. Utilize Management repair tracking hardware and software and input appropriate metrics as required., • Training: Proactively improve technical skills and stay up to date with new technology through training resources available both internally and externally as well as available through the IUOE training courses to maintain skill sets and licensing, if applicable. Work with leadership to develop Facilities Mechanic I team members to prepare them for more complex work., • Performing routine inspections around the building to identify potential issues such as structural damage, windows, and door issues., • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures including relevant demolition, reconstruction, and cleaning of project staging area as required., • Test and Diagnose the building heating equipment for possible repairs to keep climate control in the facility functioning properly., • Operation of relevant tools and machinery necessary to perform duties as directed. IUOE Facilities Engineers in this role performing work assignments in their course of duties shall perform minor tasks commonly performed by another craft in order to complete the major assignment. For illustrative purposes, such minor tasks include but are not limited to: removing conduit or electrical wiring once an electrician has made sure the power has been turned off during a major renovation assignment; touching up paint, installing molding, repair and painting of retaining walls, doorways, repair of HVAC vents, plumbing related work, as well as any cleanup and demolition required to commence and complete the work assignment. • All other duties as assigned. Qualifications/Requirements: • High school diploma or equivalent degree required., • Minimum of 3-5 years previous experience in general maintenance/repair for commercial facility required., • Must be able to obtain a New York State Gaming License. OTHER • Must have general knowledge of the use of equipment used in building trades., • Strong knowledge of building systems, including electrical, plumbing, HVAC, and mechanical systems., • Familiarity with applicable building codes, safety regulations, and environmental standards, • Ability to understand and follow OSHA guidelines., • Ability to stand, crouch, and climb to perform repairs, use ladders, and perform various types of manual labor., • Ability to lift up to 50 pounds., • Visual acuity sufficient for reading, performing repairs, and painting., • Weekends, Holidays, and swing shifts may be required., • Must be able to obtain a New York State Gaming License.

Job Description About Us ADESA, a Carvana-owned company, currently operates in over 50 locations throughout the US. Our auto auctions, some up to 200 acres, provide a wide array of vehicle services including repair, reconditioning, and auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team Reporting to the Vehicle Inspection Manager or Lead, this role supports customers by inspecting vehicles for condition, wear, tear, neglect, missing parts, mechanical issues, previous repairs and damage/structural damage. Complete required vehicle inspection promptly and accurately including imaging and uploading results of the vehicle condition. Interact with dealers and consumers as needed professionally as the face of ADESA and its collective businesses. Responsibilities • Communicate in a professional manner with customer (dealer or consumer), • Resolve any customer inquiries in a friendly, courteous and professional manner; advise management of all complaints or incidents, • Ensure internal and external customers receive prompt, efficient and courteous attention, • Inspect vehicles for signs of wear, tear, neglect, damage, previous repair or structural damage, • Complete inspection of vehicles and ensure adherence to the defined program for the customer., • Capture data accurately on a mobile device, work comfortably with software and technology., • Deliver results in a timely manner, • Maintain productivity levels as set forth by management., • Deliver consistent, accurate inspections with minimal rate of errors in accordance with reasonable expectations set forth by management., • Collaborate with Manager and sales team members on customer needs with insights to improve services provided, • Maintain equipment and tools properly and advise manager of any needed equipment maintenance or breakdown, • Ensure vehicles are in clean condition with radios, seats, mirrors and other convenience items in the same position as when the vehicle arrived, • Submit completed condition reports using the appropriate technology made available to you to complete the vehicle inspection Complete road test if required by contract or inspection typeKeep current on technology updates, new releases and product development • Understand the functionality and ability to use tools such as paint meters, OBD scanner etc., • Develop and maintain knowledge and expertise in areas of competitor products, • Any other duties assigned by the designated manager Skills and Attributes • Critical Thinking / Problem Solving, • Ability to enter data on a hand held device, • Team player who can collaborate well with multiple departments, customers and vendors, • Strong customer service skills, • High degree of safety focus, • Proven ability to multitask while maintaining attention to detail, • Ability to work in a fast-paced environment, • Excellent verbal and written communication skills Qualifications • High School diploma or GED preferred, • 1 year automotive experience preferred, • Must be 18 years of age and have a valid driver's license that meets the requirements, • Able to safely drive a variety of make/model/sizes of vehicles, • Proficiency with computer systems and applications ADESA Values • Our Next Customer May Be Your Mom: Every customer deserves the same level of care and respect one would give to their own mother., • We're All in This Together: The company is unified by the shared goal of providing fantastic customer experiences, achieved through mutual trust, respect, and understanding., • There Are No Sidelines: Employees are encouraged to be proactive, work hard, and take ownership of what needs to be done in a fast-paced environment., • Be Brave: Employees should not fear taking risks, pushing themselves outside their comfort zones, or being decisive, even if they stumble along the way., • Zag Forward: The company empowers creative and passionate thinking to find meaningful ways to be different and deliver amazing experiences., • Don't Be a Richard: A simple guiding principle to act appropriately and professionally., • Stay Scrappy: This value rejects mediocrity and "good enough," pushing employees to do more with less to pass savings on to customers. ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Constant - standing, watching, touching, listening, walking, talking, • Frequent - bending, stooping, kneeling, lifting, grasping, pushing, pulling, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Nursing --> Nursing Support Patchogue, NY Full-Time/Regular NYU Langone HospitalSuffolk is a 306-bed medical center, providing care to residents of eastern Long Island. The hospital facility is home to the Knapp Cardiac Care Centeran advanced heart disease diagnostic and treatment facilityas well as a modern ambulatory surgical pavilion with specialized services including women's imaging, a sleep laboratory, and bariatric surgery. Our Provisional Level 2 Trauma Center delivers comprehensive and specialized care for patients with traumatic injuries. The Stroke Center at NYU Langone HospitalSuffolk is designated by the New York State Department of Health as a Primary Stroke Center, with expert neurologists available to provide treatment 24 hours a day, 7 days a week. Additionally, NYU Langone HospitalSuffolk has multiple outpatient sites, including an outpatient wound care center, a hemodialysis center, and various primary care and specialty offices. Position Summary: We have an exciting opportunity to join our team as a Psychiatric Technician-I/P-Psychiatric-1 East - Full-Time - Night Shift- 7.p-7.30 a Alt- weekend - N. In this role, the successful candidate works in collaboration with Behavioral Health other staff to provide observation, care, and treatment to an adult psychiatric population. In an emergency setting. Good interpersonal and communication skills. Ability to work in fast paced healthcare environment. Follows the direction of the shift Charge RN, Nurse Manager and/or member of the Behavioral Health Management Team Job Responsibilities: • Provision of Patient Care, • Ability to identify unusual behavior of patients and their families and communicate observations to RN in charge of patient., • Regularly able to document patient's behavior and recognize physical or psychological changes in patient's condition during 1:1 observation and communicate it to the appropriate channels., • Demonstrates how to apply restraints appropriately on an annual basis., • Demonstrates thorough knowledge of hospital policies and standards regarding restraint and seclusion and 1:1 observation on an annual basis., • Ability to recognize verbal/non-verbal communication problems of patients and their families on consistent basis., • Ensures patient confidentiality is adhered to according to NYS and Federal guidelines, • Ability to make regular rounds of patients assigned to him/her and recognize change in patients status and report appropriate information to the nurse in charge of patient consistently., • Ability to provide information regarding patient behavior and patient interactions to the RN to be utilized in the development of an individual master treatment plan regularly., • Participation in providing a safe-environment for patients and others at all times., • Under the direction of the nursing staff, set limits and restrictions in a considerate and humane manner., • Ability to protect patient's privacy, confidentiality and rights on daily basis., • Participation in evaluation of the therapeutic environment and report non-therapeutic components to RN as needed., • Ability to complete various errands as requested; such as transporting patients, contraband search, retrieving and delivering supplies, specimens, instruments, test results, etc., when necessary., • Ability to perform 1:1 within the Behavioral Health Department as needed., • Verify the 1:1 with the RN assigned when necessary., • Demonstrate location of Dr. Heavy button, restraints, and security phone numbers as needed., • Completes thorough contraband search of patient's belongings upon admission according to departmental Policy and procedure, and communicates pertinent information to RN and MD. Meets Expected Documentation Requirements • Documents appropriately for 1:1 and close frequent observation patients., • Documents appropriately for Q15 checks, etc., • Documents patient's belongings on inventory sheets according to hospital Policy., • Documents appropriately relative to patient restraints as required by RN., • Ability to give written summary of patient observations to RN as needed for continuity of care., • Completes paperwork as assigned (admission paperwork, daily attendance, census, documentation checklists, patient satisfaction surveys, follow-up calls post discharge.), • Enters daily patient treatment orders., • Prepares and closes out patient records for staff. Makes Adequate Contribution to Overall functioning of the Department • Conducts contraband checks in Emergency Department prior to admission., • Brings patient to floor and stays with patient until they are turned over to a Nurse or Mental Health Assistant to be interviewed or have body check observation., • Conduct complete belongings list on every patient., • Fill out Q15 sheets for new patient as needed., • Helps serve meals and assist in Dining Room as needed., • Demonstrates willingness to help with Activities of Daily Living and understands some people have to be helped in bathing., • Consistently monitors showers of patients and assists patients as needed., • Consistently helps patients that are discharged such as packing their belongings., • Assists taking patients out when transportation arrives on a regular basis., • Assists patients with laundry daily as needed., • Provides 1:1 on patients as necessary on unit, emergency department, or other departments as required by Management Team., • Ability to work as part of a psychiatric team on consistent basis. Minimum Qualifications: To qualify you must have a High School diploma or comparable education equivalent. Ability to work effectively with Behavioral Health patients. Knowledge of non-violent crisis intervention technique. First Aid Training. BLS Certification. De-escalation Training. Occasionally lift/carry up to 25 lbs. Occasionally push/pull up to 75 lbs. Frequently bend, squat, kneel and occasionally reach above shoulders. NYU Langone HospitalSuffolk provides its staff with far more than just a place to work. Rather, we are an institution you can be proud of, an institution where you'll feel good about devoting your time and your talents. NYU Langone HospitalSuffolk is an equal opportunity employer and committed to inclusion in all aspects of recruiting and employment. All qualified individuals are encouraged to apply and will receive consideration. We require applications to be completed online. View Know Your Rights: Workplace discrimination is illegal. NYU Langone Hospital-Suffolk provides a salary range to comply with the New York state Law on Salary Transparency in Job Advertisements. The salary range for the role is $51,597.00 - $51,597.00 Annually. Actual salaries depend on a variety of factors, including experience, specialty, education, and hospital need. The salary range or contractual rate listed does not include bonuses/incentive, differential pay or other forms of compensation or benefits. View the Pay Transparency Notice for further details.

Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." Total Rewards: Competitive base salary + uncapped commission. • Year 1 On-Target Earnings: $70,000+, • Top Earner Potential: $100,000+ per year What do our Pest Control Consultants do? The primary purpose of this role is to sell the company's industry leading pest management services and products to new and existing residential customers, while maintaining a customer-focused service to grow the business. You'll be the face of our national brand to your local community, and your clients will count on you to protect their homes and their families. This includes assessing customers' needs by consulting with the customer and performing an analysis using expert knowledge of the company's products and services that result in the sales of the organization's pest control solutions. Responsibilities include but are not limited to the following: • Visually inspect homes for pests, pest harborage, pest entries, etc. Based on assessment findings, sell pest control solutions as well as preventative maintenance for residential customers, • Collaborate with our Customer Service Center, Inside Sales department, and Technicians for increased opportunities, • Partner with Branch Manager to identify revenue streams with our current base and service specialist engagement Develop proposals for customers to resolve existing pest issues while also proposing additional enhancements to pest household services, • Complete Home diagram using Sales CRM and provided to ensure clear understanding of customer home and possible challenges, • Follow up on past proposals to close sales opportunities, • Provide expert knowledge to new service installations to ensure the job is completed satisfactorily, • Complete daily activities and sales performance using the company sales CRM Essential Job Functions: We're not going to sugarcoat it. The essential functions of this job have some physical demands (of course, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Here's what we mean: • You've got to be able to move up to 10 lbs. regularly and 1120 lbs. frequently, whether that's lifting, carrying, pushing, pulling, or otherwise repositioning objects, • You'll move around a lot regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. You'll go up and down stairs, ladders, scaffolding, ramps, and poles. And you'll need to keep your balance when walking, standing, or crouching on narrow, slippery, or moving surfaces. (You'll definitely get your steps in.), • You must be comfortable dealing with different pests (spiders, flies, mosquitos, rodents, etc.), as well as being required to go into small spaces such as basements, crawl spaces, attics, etc., • You must be able to safely operate a motor vehicle and make sure it and all other equipment is kept clean, • Sometimes you'll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you'll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (you know, where critters live) What do you need? • High school diploma or equivalent, • Strong social, customer service, and communication skills in fact, we'd be really impressed if you came to this role with related experience and/or training in sales., • Prefer at least 1-2 years of pest technician or sales experience, • Travel up to 100% of time within assigned territory(s) Yearly: $36,500.00 - $44,500.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: • Multiple avenues to grow your career, • Training and development programs available, • Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness • Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1, • Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement • 401(k) retirement plan with company-matching contributions Work-Life Balance • Vacation days & sick days, • Company-paid holidays & floating holidays, • A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply.

As a Customer Specialist, you will play a key role in delivering an iconic, customer-first experience that sets CarMax apart. You'll act as a trusted guide, supporting customers through every step of their car-buying and selling journey. From facilitating appraisals and test drives to managing paperwork and repair orders, you'll ensure a seamless, transparent process that reflects CarMax's commitment to honesty and innovation. This dynamic role offers variety, autonomy, and the opportunity to collaborate across teams while making a meaningful impact on every customer interaction. At CarMax, we are the nation's largest retailer of used cars with stores from coast to coast, and we are still growing. We're rethinking the way people buy cars and our associates help us do just that. We believe work should feel meaningful and rewarding, with opportunities to make an impact every day. Whether you're advancing your career or growing your skillset, we are here to drive you forward. • Deliver exceptional customer service by guiding customers through sales, appraisals, test drives, and financing applications., • Conduct accurate vehicle condition assessments, documenting details for appraisals and communicating findings to Buyers., • Manage inventory processes, including vehicle check-in, daily scanning, and reconciliation., • Perform cosmetic inspections to ensure vehicles meet CarMax Quality Standards., • Handle administrative tasks such as printing reports, maintaining transaction paperwork, auditing documents, and managing payments., • Coordinate service appointments, review repair order invoices for accuracy in billing, and collaborate effectively across teams to maintain a smooth, customer-focused experience., • Follow CarMax Environmental, Health and Safety (EH&S) requirements and maintain a clean and orderly work area., • Strong communication skills with confidence in representing CarMax and its products., • Ability to build lasting relationships and create win-win solutions for customers., • Demonstrated integrity, respect, and teamwork in a fast-paced environment., • Skilled in balancing customer needs with business goals and following processes accurately., • Ability to manage multiple tasks, maintain attention to detail, and meet deadlines., • High School Diploma or equivalent and a valid driver's license., • Ability to lift up to 25 lbs and accurately read and transcribe data., • Sales or customer service experience in retail or similar environments., • Basic proficiency with Microsoft Office Suite (Word, Excel, PowerPoint). At CarMax, we revolutionized the used car buying experience over 30 years ago by introducing transparency and integrity into the process. Our commitment to customer experience, innovation, and community has made us the nation's largest used car retailer. With over 250 store locations and over 30,000 associates, we are proud to have been recognized as one of the Fortune 100 Best Companies to Work For and are committed to helping our communities thrive. As an associate, you are part of an innovative movement to empower the modern customer and drive progress. Your work fuels changesparking ideas, overcoming challenges, and shaping what's next. Join us in creating a better future for our company, our customers, and the communities we call home. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. The hourly rate for this position is: $20.60 - $30.90 Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commission/incentive eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our CarMax Benefits website.

At Zebra, we are a community of innovators who come together to create new ways of working. United by curiosity and a culture of caring, we develop smart solutions that anticipate our customer's and partner's needs and solve their challenges. Being part of Zebra Nation means you are seen, heard, valued, and respected. Drawing from our unique perspectives, we collaborate to deliver on our purpose. Here you are part of a team pushing boundaries today to redefine the work of tomorrow for organizations, their employees, and those they serve. You'll have opportunities to learn and lead in a forward-thinking environment, defining your path to a fulfilling career while channeling your skills toward causes you care aboutlocally and globally. Come make an impact every day at Zebra. As a Test System Manager, you will provide strategic leadership and direction to our test engineering teams to ensure all manufacturing requirements and product specifications are met in our Advance Data Capture and Advanced Location Solutions divisions. You will build, mentor, and drive high-performing teams to develop highly optimized test processes using next-generation tools and technologies. Operating with an innovative and agile mindset, you will act as a key influencer across senior leadership to champion new manufacturing technologies that directly impact Zebra's business. By leveraging Lean Six Sigma principles and Industry 4.0 frameworks, you will define and execute the strategic roadmaps necessary to continuously improve quality, reduce costs, and accelerate production cycle times. Strategic Leadership & Team Development • Provide robust leadership and mentorship to the test engineering organization, guiding the team through seamless New Product Introductions (NPI) and the successful transition of manufacturing processes into sustaining operations., • Manage the departmental budget and resource planning, strategically forecasting capital expenditures, hardware, software, and personnel requirements to achieve organizational growth targets., • Execute and champion corporate-directed initiatives, ensuring your team's goals directly align with Zebra's broader strategic business objectives. Innovation & Process Architecture • Architect and execute comprehensive Manufacturing and Test strategies, overseeing their successful deployment across our global manufacturing partners and distribution centers., • Spearhead the evaluation and integration of next-generation technologiessuch as automation, digitalization, and Industry 4.0 frameworksto modernize manufacturing test processes, elevate product quality, and drive productivity., • Champion continuous improvement initiatives utilizing the Lean Six Sigma framework to streamline workflows, improve on-time performance, reduce scrap, and dramatically optimize costs and cycle times. Cross-Functional Collaboration & Execution • Partner closely with Design Engineering leadership to co-develop and execute strategies that yield highly efficient, low-cost, and sustainable manufacturing processes for Zebra products., • Direct rapid-response engineering efforts to swiftly resolve complex technical escalations, mitigating production bottlenecks and ensuring issues do not impede or slow down critical shipments., • Act as Zebra's primary technical ambassador to external suppliers, steering issue escalation and resolution while actively educating partners on emerging manufacturing technologies and standards., • Cultivate strong, cross-functional networks across the organization, collaborating closely with senior management to coordinate complex, multi-departmental projects. Minimum Job Requirements: • Bachelor's or Master's degree in an engineering discipline (or equivalent experience), • 8+ years of relevant work experience with a Bachelor's degree, or 6+ years with a Master's degree, • People Leadership Experience Preferred Job Requirements: • Lean Six Sigma, • Machine Vision, • Manufacturing Processes, • RF Technology Day Shift: Monday - Friday Equal Opportunity Employer: Zebra is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability and protected veteran status, or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. Pay Range: $138,800.00 - $208,200.00 Annual Incentive Compensation: In addition to base pay, Zebra offers this role the opportunity to earn a performance-based annual cash incentive, at a target equal to 15% of base pay, in accordance with the terms of the applicable incentive plan. Zebra Total Rewards: Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. Salary offered will vary depending on your location, job-related skills, knowledge, and experience. Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. Benefits: We understand the importance of work-life balance and wellbeing, which is why we offer flexibility for our teams including: hybrid work, adaptable hours, Summer Flex Fridays, Focus Fridays, and an annual companywide well-being day to promote revitalization and success.

What We're Looking For:Senior customer engagement program manager will be responsible for leading cross-functional team of Systems and SW Engineers, Test Engineers, Product manager, Account Team, Sales Engineers, etc. Support product/solution development activities to drive revenue ramp (faster time

Job Description With over 58 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position Overview As a Chef Instructor, Savory at Sur La Table, you are the in-store expert and advocate for all things savory cooking. You deliver #bestincenter service, a company-wide standard for excellence in service, by sharing specialized knowledge in culinary techniques, cooking fundamentals, and personalized instruction that supports all company initiatives. The Chef Instructor, Savory plays a key role in inspiring a love for cooking while driving sales of cookware, cutlery, and kitchen tools through hands-on savory classes and engaging culinary instruction. Key ResponsibilitiesCustomer Experience & Brand Representation · Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Deliver exceptional in-store culinary experiences focused on savory cooking classes that reflect Sur La Table’s passion for food, teaching, and high standards, while following provided recipes and game plans to ensure consistency and quality. · Communicate technical cooking concepts and savory techniques in a clear, encouraging, and approachable manner. · Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources. Sales & Business Performance · Drive sales by upholding kitchen standards, encouraging second class sign-ups through strong customer engagement, and promoting retail items used or featured in class. · Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates. · Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews. Team Engagement & Store Support · Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations. · Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations. · Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readiness. Operations & Compliance · Ensure compliance with food safety standards, local health codes, and sanitation regulations. · Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment. · Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses. · May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions. · Ensure store safety and cleanliness, addressing any maintenance needs promptly. · Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy. · Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements · Ability to communicate verbally and work cooperatively with associates and customers. · Ability to remain standing for up to 4 hours at a time. · Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor. · The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose. · Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment. · Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques. · Ability to lift and/or move merchandise weighing up to 50 lbs. · Ability to ascend/descend ladders to retrieve and/or move merchandise. · Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work. · Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs. · Regular and predictable attendance with the flexibility to adjust class assignments based on demand. · Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience · Must be 21 years of age or older at the time of employment. · A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education. · 1-2 years of kitchen operations experience. · Valid Food Manager Certification. · Excellent communication, problem-solving, and decision-making abilities. · Passion for community engagement and providing exceptional customer experiences. This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Washington state applicants only: If you believe that this job posting does not comply with applicable Washington state law, please notify us by sending an email to WACandidates@cscshared.com. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact hrbenefits@cscshared.com. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionTribute Baking Company is the strategic combination of five businesses with rich histories in the baking industry! Always Bagels, Original Bagel, Hometown Foods USA, Dutch Maid and Just Bagels, together, create a market leading producer of authentic New York style kettle-boiled, hearth-baked bagels and high-quality cake products sold into the in-store bakery, club store, foodservice, and convenience store channels.Reporting to the Regulatory Compliance Manager, the Quality Assurance Manager will oversee the day-to-day food safety and quality assurance functions within the facility, ensuring compliance with all food safety standards and regulations. This role will involve supervising a team, conducting inspections, implementing quality control measures, and fostering a culture of food safety and quality throughout the manufacturing process. This is an on-site position at our Bohemia, NY location.Job responsibilities:Lead and manage the quality assurance team to ensure adherence to food safety regulations and industry standards.Develop, implement, and maintain effective quality assurance protocols and procedures.Conduct routine inspections, audits, and assessments of production processes to identify and mitigate food safety risks.Review and analyze quality data, prepare reports with actionable insights and recommendations for continuous improvement.Collaborate with cross-functional teams to resolve quality issues and promote best practices in food safety.Train and mentor staff on quality assurance processes, food safety regulations, and compliance requirements.Monitor compliance with Good Manufacturing Practices (GMP) and Hazard Analysis Critical Control Point (HACCP) principles.Maintain accurate documentation and records related to quality assurance and food safety activities.Makes timely decisions to support production as needed.Demonstrate strong leadership of the food safety and quality agenda at the plant, serve as a change supervisor to drive improvements in programs, processes, and culture.Participate in ongoing training to stay current with quality assurance programs.Prepare sampling plans for ingredients, finished products and other materials to gather samples, perform analyses, and take appropriate actions based upon the test results.Ensure sufficient quality/sanitation staffing and competence to execute the responsibilities of the quality/sanitation function.Lead and facilitate the plant customer complaint investigation and resolution process, institutionalize corrective actions.Establish a quality culture along with the leadership team to ensure quality is proactively built in, engage all employees in quality & food safety strategies and facilitate an audit-ready environment.Supervise all associates directly assigned to the quality department and work closely with associates in the production, packaging, logistics, maintenance, the Human Resource departments, and the regulatory compliance manager.Counsel and discipline the employees as needed following the handbook. When needed, documents notable items of associates, both positive and negative, and places in personnel file.Safety Responsibilities:Work in a safe and responsible manner at all times, following all safety policies, procedures, and rules.Report unsafe observations or conditions to a supervisor or manager.Immediately report an injury or accident to a supervisor or manager. Social Responsibilities:Uphold and enforce the Company's labor standards, health and safety, environmental programs and follow business ethics policies.Ensure the food safety crew is provided adequate training and understand policies and program.Meet all Company training requirements.Meet Company Social Responsibility established KPIs. The Quality Assurance Manager will be required to stand, sit, walk, bend, stoop, kneel, reach and perform overhead reaching. The role also requires fine manipulation skills, the ability to move around the office continuously, and the ability to lift and/or carry up to 30 pounds. Tasks may involve pushing and pulling as necessary. The individual must be capable of performing these duties throughout the workday.RequirementsSc. in food science or food safety with working knowledge is preferredMinimum of 2 years of Quality system managementMinimum of 2 years of SQF or other GFSI standards implementation and certificationHACCP CertifiedCertified SQF Auditor & Practitioner of current version and future updatesPCQI certified, Food Defense Certified.Must be well organized, able to work on several projects at once and prioritizeDemonstrate a high level of communication, cooperation and to maintain and troubleshoot plant issuesGreat working knowledge of FDA, State and USDA regulation or equivalentWorking knowledge of SQF and/or other GFSI Standards, HACCP, GMPs and Sanitation standardsDemonstrated interpersonal and communication skills (written and verbal)Expert in writing detailed SOPsExpert in process control and process improvementAbility to train and mentor direct reportsProven ability to train teamsFluent in Spanish Job Posted by ApplicantPro

Job Description Field Repair Technician Field Repair Technician – Helium Leak Detection Instruments & Systems Location: Ronkonkoma, New York Department: Service Reports To: Service Manager Position Summary Vacuum Instruments Corporation (VIC) is seeking a motivated and hands-on Service Technician to install, troubleshoot, repair, calibrate, and maintain helium leak detection instruments and custom leak testing systems at customer facilities throughout North America. This position requires strong mechanical aptitude, electrical troubleshooting skills, and the ability to work independently while delivering outstanding customer service. Technicians receive extensive product training and work with advanced leak detection technologies used in the automotive, aerospace, medical device, HVAC, semiconductor, and industrial manufacturing industries. Service technicians typically earn 30–40% above their base salary through overtime and travel compensation. Essential Responsibilities • Install, commission, and validate helium leak detection equipment and automated leak testing systems., • Perform preventive maintenance, diagnostics, repairs, and calibration of leak detection instruments., • Troubleshoot electrical, mechanical, pneumatic, and vacuum systems., • Analyze system performance and identify root causes of equipment issues., • Read and interpret electrical schematics, wiring diagrams, mechanical drawings, and technical documentation., • Conduct functional testing and verify equipment performance after repairs., • Train customer personnel on proper operation and basic maintenance of equipment., • Prepare accurate service reports documenting work performed and recommendations., • Communicate technical findings to customers and internal engineering and service teams., • Maintain service tools, calibration equipment, and company vehicle., • Follow all company safety policies and customer site safety requirements., • Support equipment installations and startup projects at customer facilities. Qualifications Required • Associate degree or technical training in Electronics, Electrical Technology, Mechanical Technology, Mechatronics, Industrial Maintenance, or a related field, or equivalent experience., • Strong mechanical and electrical troubleshooting skills., • Ability to use electrical test equipment such as multimeters., • Ability to read electrical and mechanical drawings., • Good computer skills (Microsoft Office and Windows-based software)., • Excellent communication and customer service skills., • Valid driver's license and acceptable driving record., • Ability to lift up to 50 pounds., • Ability to work independently and manage multiple service assignments. Preferred • Experience servicing industrial equipment., • Experience with vacuum systems, pumps, or leak detection equipment., • PLC troubleshooting experience., • Pneumatic and electro-mechanical troubleshooting., • Industrial manufacturing or field service experience., • Knowledge of mass spectrometry or helium leak testing (training provided if needed). Travel Requirements • Travel approximately 50–70%, primarily within US., • Overnight and weekend travel is expected depending on customer schedules., • Flexibility to work overtime and weekends when supporting customer installations or emergency service calls. Physical Requirements • Frequently stand, bend, kneel, and work around industrial equipment., • Lift and carry equipment weighing up to 50 pounds., • Work in manufacturing environments while following all required PPE and safety procedures., • Ability to work from ladders or elevated platforms when necessary. What We Offer • Competitive base salary, • Significant overtime and travel earnings, with technicians typically earning 30–40% above their base salary, • Comprehensive technical training, • Health, dental, and vision insurance, • 401(k) with company match, • Paid vacation and holidays, • Company-paid travel expenses, • Company laptop, phone, and service tools, • Career growth opportunities within a global technology company Experience: • Vacuum Leak Detection: 2 years (Preferred), • Field Manufacturing Engineering Repair : 3 years (Required), • Helium : 2 years (Required), • Industrial maintenance: 3 years (Preferred) Willingness to travel: • 50% (Preferred) Work Location: In person