Offres water management à Elizabeth, New JerseyCréer des alertes d'emploi

Job DescriptionJob Summary • Adult Medical Daycare has immediate openings for full or part time drivers to transport members. Looking for someone who ensures adherence to safety rules, and able assist members in boarding or exiting, as necessary. Preferred to have a New Jersey CDL Driver’s License but not necessary. General Accountabilities, • Drive multi-passenger vehicles to transport members., • Picks up and drops off passengers at designated locations, following time schedules., • Maintains knowledge of first-aid procedures., • Complies with traffic regulations to operate vehicles in a safe and courteous manner., • Maintains order among passengers during trips to ensure safety., • Checks the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order., • Reports any bus malfunctions or needed repairs to Transportation Director., • Bi-Lingual Must speak English and Spanish, • Education: High school diploma or equivalent, • Experience: Appropriate certifications and/or licensures, • Service orientation (experienced with assisting elderly and disabled persons)Skills, • Excellent verbal and written communication, • Judgment and decision making, • Time management, • Social perceptiveness

Job Description Job Summary • Drive multi-passenger vehicles to transport members., • Picks up and drops off passengers at designated locations, following time schedules., • Maintains knowledge of first-aid procedures., • Complies with traffic regulations to operate vehicles in a safe and courteous manner., • Maintains order among passengers during trips to ensure safety., • Checks the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order., • Reports any bus malfunctions or needed repairs to Transportation Director. Job Qualifications • Bi-Lingual Must speak English and Spanish, • Education: High school diploma or equivalent, • Experience: Appropriate certifications and/or licensures, • Service orientation (experienced with assisting elderly and disabled persons) Skills • Excellent verbal and written communication, • Judgment and decision making, • Time management, • Social perceptiveness

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a Senior HVAC Technician (Snr HVAC Tech) to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC technician with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Service Technician will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Service Tech will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Service Technician will • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.) At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email .

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Tug Mate of Towing OVERVIEW Since 1977, Miller's Launch's most important goal is to please customers on, near or across the waters in New York (NY), New Jersey (NJ) and Connecticut (CT). Since then we have had vessels work up and down all coasts of the US as well as internationally. The Company policy has always been to conduct its business in such a way to strive for excellence in safeguarding employees, equipment, the public and environment, zero harm to people, zero incident and zero spill. The Company recognizes that it is vital, and essential to integrate safety into all operations and activities. From the solitary launch passenger to the largest corporate accounts, our prime objective is customer satisfaction through our "can-do" attitude. For Miller's Launch, there is no such thing as after-hours. We serve the port of the Tri-State Area 24 hours a day, providing prompt response and stellar marine support. Miller's Launch's marine professionals and top-notch equipment will assure the success of your task. Our personnel are federally licensed operators, certified welders, custom fabricators and fully trained and certified pollution and environmental specialists. Miller’s Launch operates a fleet of about 70 pieces of floating equipment including but not limited to: offshore supply vessels, tugboats, crew boats, utility boats, launch boats, small work boats, rib boats, roll-on roll-off systems, barges and cranes. Miller’s Launch isn’t just supply boats, tugboats or launch boats we adapt to our clients’ needs and wants. From moving heavy equipment or trucks on and off islands, to offshore wind support, emergency oil spill response, to film/photo/drone shoots and productions. Our business is the water. POSITION: Millers Launch Inc. is seeking a qualified individual to fill a full-time position as a Tug Mate, working a two week on two week off rotation. The successful candidate will be responsible for the management and documentation of widespread safety, health and environmental policies for the vessel. This individual will be responsible for the vessel’s compliance with local, state, federal and international laws and regulations pertaining to navigation, safety, health, and environment. RESPONSIBILITIES: · Work as directed by Towing and/or project personnel · Stand wheelhouse watch on the assigned vessel · Comply with all state and federal regulatory requirements · Responsible for executing MT&B Towing Safety Management System (TSMS) aboard the assigned vessel · Preparation, management, and facilitation of safety meetings and safety drills · Complete Job Safety Analysis (JSA) and or Activity Hazard Analysis (AHA) · Delegate daily tasks to the crew to ensure operational readiness · Oversees training and mentoring of crew members · Follows company and work site safety policies/procedures and commits to an “incident and injury-free” work environment · Responsible for the safe transportation of barges vessels and crew · Responsible for maintenance and cleanliness of tug and barge · Direct crew in the performance of drills · Determine the need for and assign lookouts as necessary · Prepare, monitor, and update vessel work lists and maintenance schedules · Ensure all crewmen are performing their duties · Work aboard boats and barges using heavy lines, winches, mechanical tools for repairs as needed · Perform other duties as assigned REQUIREMENTS: · 5+ years total experience with at least 2+ years of experience in a Mate role · Merchant Mariners Credentials (MMC) Master 100 Ton Near Coastal · Mate of Towing endorsement · Transportation Worker Identification Credential (TWIC) · CPR/AED First Aid Certification · Driver's License · Knowledge of NY Harbor a Plus PHYSICAL REQUIREMENTS: · Must be able to tolerate rough seas, vibrations, heat, harsh weather conditions, confined spaces, and high noise levels · Work will frequently require individuals to push, pull, bend or stand for long periods of time, and climb ladders that have capacity limits of 300 lbs. · Must be able to lift or carry miscellaneous equipment, supplies, and parts up to 50 lbs. unassisted · Ability to maneuver through/in/around small and/or confined areas within a vessel, as applicable Must be able to maintain both static and dynamic standing balance to complete various duties associated with the job · Must be capable of performing emergency duties as listed in the vessel’s station bill when onboard a vessel BENEFITS: Miller’s Launch offers excellent benefits for medical, dental, vision, 401k with employer match. Millers Launch is an equal-opportunity employer.

A major New Jersey municipality is seeking an experienced and strategic Director of Public Works to oversee infrastructure, sanitation, utilities, facilities, and capital improvement projects. The ideal candidate will bring a proven track record of managing large-scale municipal operations, budgets, and multidisciplinary teams. Compensation & Benefits • Competitive salary: (140k+ negotiable), • Pension eligibility after one year of service, • Medical, prescription, and dental coverage, • Optional vision, life, disability, and prepaid legal plans, • 15 municipal holidays, • Vacation and sick leave Key Responsibilities • Direct all aspects of public works operations, including roads, sanitation, water and sewer systems, fleet, and facilities, • Oversee capital improvement planning and departmental budgeting, • Establish operational priorities and ensure efficient service delivery, • Manage staff, equipment, contractors, and regulatory compliance, • Prepare reports and presentations for senior leadership and governing bodies Minimum Qualifications Candidates must meet one of the following: • 10+ years of relevant public works or infrastructure experience, including at least 4 years in a management role; or, • Bachelor’s degree and 6+ years of relevant experience, including at least 4 years in management; or, • Master’s degree and 5+ years of relevant experience, including at least 4 years in management Required Qualifications • Experience leading public works operations for a municipality or similarly complex organization, • Strong budgeting and capital planning experience, • CPWM, PE, or relevant NJDEP certifications are highly desirable

Company Description 100+ year-old family-owned Industrial PVF wholesale distributor. Role Description This is an on-site, full-time role for an Inside Sales professional located in Hillside, NJ. The Inside Sales Representative will be responsible for assisting customers with their inquiries, providing product knowledge and recommendations, processing orders, preparing quotes, and maintaining strong customer relationships. Experience in commercial PVF/Heating is preferable. Qualifications • Experience in sales, customer service, or related fields, • Strong communication and interpersonal skills for providing excellent customer support and building client relationships, • Knowledge of plumbing supplies, commercial boilers, hot water, PVF, system design, • Proficiency in using sales and inventory management systems, computers, and standard office software, • Ability to work effectively in a fast-paced environment and handle multiple priorities, • Problem-solving skills and attention to detail

The Role This role is remote, with 50% travel to the states we have cultivation/production facilities, primarily travel will be in mid-west and east coast but could be in any of the 14 states we operate. GTI just keeps growing and growing!We'reseeking a logistical genius and construction management guru to overseeCPGconstruction projects. As a Construction Project Manager for GTICPG, you will be responsible for serving as the liaison between GTI HQ and ourCultivation/Processing Facilitybuild-outs in the field ensuring scope of work is executed, quality of brand is maintained, timelines are beat, and budgets are always in the green! You should have off thechartscommunication skills to work with sub-contractors/vendors and your teammates alike. As a proven Construction PM, you have managed 20+ projects at a time working across a national landscape. Responsibilities Manufacturing Facility Construction (Primary Focus) • Lead full lifecycle construction of manufacturing facilities from site feasibility through commissioning and turnover, • Oversee build-outs for:, • Commercial production kitchens, • Infusion and formulation labs, • Packaging and labeling lines, • Automated filling and bottling systems, • Vaults and finished goods storage, • Cold storage and environmental-controlled rooms, • Coordinate sanitary design standards and cGMP-aligned construction, • Ensure compliance with:, • Local health department regulations, • OSHA requirements, • State cannabis manufacturing regulations, • Food-grade and pharmaceutical-grade standards where applicable, • Manage integration of:, • Process utilities (compressed air, steam, chilled water), • High-capacity electrical infrastructure, • HVAC systems for temperature and humidity control, • Cleanable wall/ceiling systems and floor coatings, • Oversee equipment procurement, vendor coordination, installation, and startup sequencing, • Lead commissioning and operational readiness efforts with site manufacturing teams Extraction Facilities (Secondary Focus) • Support construction of:, • Hydrocarbon, ethanol, CO, and solventless extraction rooms, • Post-processing and refinement labs, • Solvent storage and recovery systems, • Coordinate C1D1 / C1D2 rated spaces and hazardous electrical systems, • Ensure compliance with NFPA, fire code, and AHJ requirements, • Manage specialized HVAC and gas detection systems Cultivation Facilities (Secondary Focus) • Support build-outs of:, • Flower, veg, and propagation rooms, • Drying and curing spaces, • Irrigation and fertigation systems, • Environmental control (HVACD) systems, • Coordinate high-load mechanical systems and infrastructure upgrades Core Project Management Responsibilities • Direct all phases of construction management:, • Feasibility and due diligence, • Budget development and cost control, • Scheduling and resource planning, • Design coordination, • Field execution, • Commissioning and close-out, • Develop resource-loaded critical path schedules, • Prepare and manage capital budgets and cashflow projections, • Act as single point of contact between HQ, site leadership, engineering, vendors, contractors, landlords, and governing authorities, • Track project performance across cost, schedule, scope, and quality metrics, • Identify and mitigate operational and regulatory risk, • Maintain strict adherence to corporate quality, safety, and brand standards Qualifications • Bachelor's degree in engineering, Construction Management, Architecture, or related field, preferred, • 5+ years of project management experience, preferred, • Preferred experience with:, • Controlled Environmental Agriculture (CEA), • Greenhouse or indoor grow facilities, • High-capacity HVAC and mechanical systems, • Industrial electrical distribution systems, • Experience managing multi-site, multi-state expansion programs, • Strong understanding of environmental controls and agricultural infrastructure preferred Technical Skills • Proficient in construction management software such as:, • Primavera P6, • Procore, • Timberline, • PlanGrid (or similar), • Advanced Microsoft Project and Excel (budget tracking, forecasting, modeling), • Ability to interpret mechanical, electrical, irrigation, and environmental control drawings, • Highly analytical and systems-oriented, • Strong critical thinking and problem-solving capabilities, • Comfortable managing 15-20+ concurrent projects nationally, • Effectivecommunicatoracross operations, engineering, compliance, and executive leadership, • Operates with professionalism and integrity, • Must pass all required background checks, • Must remain compliant with all applicable state and company regulations, • Flexible schedulerequired, including occasional evenings/weekends during critical project phases

Global Environment Manager Summit, NJ ( Hybrid) Full Time What you will do Remote work options may be considered on a case-by-case basis and if approved by the Company The Global Environment Manager leads environmental compliance programs and advances corporate sustainability initiatives across operating sites. This role is accountable for regulatory compliance, data integrity, and continuous improvement in environmental performance. The role partners closely with cross‑functional teams—including Sustainability, Operations, Procurement, Corporate Real Estate, Legal, and Product R&D—as well as site, regional, and global EHS teams to reduce environmental risk, improve resource efficiency, and deliver on sustainability commitments. Key responsibilities include overseeing the development and implementation of EHS policies, ensuring regulatory compliance, and strengthening company‑wide sustainability programs. The manager provides subject‑matter expertise, leads teams, and drives initiatives that balance environmental risk reduction with business objectives. Key Responsibilities Environmental Compliance • Support compliance with environmental laws and regulations, including those governing air emissions, wastewater discharges, hazardous and non-hazardous waste, and chemical management (e.g., RCRA, CAA, CWA, TSCA, EPCRA, REACH)., • Provide support to site and regional EHS teams for permit applications, renewals, and regulatory reporting to federal, state, and local agencies., • Conduct environmental inspections and audits; track corrective actions to completion., • Maintain environmental management system (EMS) documentation, corporate level environmental standards, and training materials., • Partner with site operations and EHS teams to ensure regulatory requirements are integrated into daily activities and projects., • Connects externally to industry associations and thought leaders to benchmark our goals, programs and processes., • Respond to questions from and provide guidance to internal stakeholders regarding regulatory compliance and sustainable operations., • Support various global workstreams – e.g. PFAS, emerging regulations, CSRD – as needed. Sustainable Operations • In partnership with Global Sustainability and Operations, lead or support initiatives to drive sustainable operations. Key areas of focus:, • Reduce waste generation, increase reuse and recycling, and improve waste diversion performance., • Improve water efficiency and mitigation water/business interruption risk., • Other focus topics may include biodiversity and GHG/Net Zero, • Coordinate data collection, validation, and reporting of waste and water metrics to support regulatory reporting and sustainability goals., • Work to embed sustainability initiatives within functional team processes and procedures., • Evaluate suppliers and waste vendors to ensure alignment with company sustainability and compliance standards., • Develop and promote best practices for circular resource use and water stewardship across operations. Pharmaceuticals in the Environment (PiE) • Support initiatives to minimize release of active pharmaceutical ingredients (APIs) and other chemicals of concern to the environment., • Partner with R&D, Operations and EHS teams to assess and control PiE risks related to wastewater discharges and waste handling., • Maintain awareness of evolving regulations and industry best practices related to pharmaceuticals in the environment. Training and Communication • Develop and deliver environmental compliance and sustainability training for global, regional and site personnel., • Communicate updates on regulatory changes, corporate sustainability initiatives, and emerging environmental issues. What we are looking for Required Qualifications • Bachelor’s degree or equivalent in Environmental Science, Sustainability, Engineering, or a related field, • A minimum of 8 years of progressive experience in environmental compliance and sustainability management within complex organizational settings, • Strong understanding of environmental regulations (EPA, EU, local authorities) and sustainability reporting., • Experience managing waste, water, and chemical compliance programs., • Strong project management skills., • Demonstrated ability to lead, build, influence, and implement standard business processes and procedures., • Demonstrated critical thinking and analytical skills to evaluate data and challenge results., • Demonstrated experience with change management., • Outstanding leadership and collaboration with ability to gain trust and influence at all levels., • Demonstrated expertise in environmental data management, performance measurement, and regulatory compliance, • Proven ability to lead risk assessment and mitigation efforts, ensuring adherence to environmental health and safety regulations, • Proficiency in Microsoft Office applications, particularly Excel and PowerPoint, to support data analysis, reporting, and presentations Desired Qualifications • Six Sigma certification, • ISO14001 Lead Auditor or Auditor Training

Job Description Job Title: Banquet Server Pay Rate: $140 per event Hire Date: Immediate Schedule: Part-time (Based on business needs, usually weekends with occasional weekdays) Job Overview: Sweet Tee’s Catering LLC provides catering services for various special events; from Wedding Receptions to Birthday Celebrations and Corporate Events. Our organization is looking for a courteous and professional banquet server to be responsible for greeting, assisting, and serving guests at special functions and events. The banquet server will help assist with event planning, preparation, clean up, and serving guests. This is a 1099 employee position that is expected to have availability based on business needs. If you're hard-working and dedicated, Sweet Tee’s is an ideal company for you. Duties/Responsibilities: * Serves patrons with food and beverages in a positive and friendly manner. * Presents ordered choices in a prompt and efficient manner. * Maintains dining ambiance with an enthusiastic attitude. * Prepares room for dining by clothing tables and setting decorations, condiments, candles, napkins, service plates, and utensils. * Maintain a high level of cleanliness and awareness of sanitary practices. * Keeps kitchen staff informed by noting the timing of meal progression. * Maintains table setting by removing courses as completed, replenishing utensils, refilling water glasses, and being alert to patron spills or other special needs. * Assisting with event preparation, set up, and closing, including setting up and packing away tables, table cloths and place settings, and buffets * Maintain composure in a fast-paced environment. Qualifications: * High school diploma or GED * At least one year of server experience * Ability to lift 50-75 pounds and stay comfortable on their feet for the entire shift * Excellent time management and the ability to prioritize tasks * Positive attitude and teamwork skills * Excellent interpersonal, communication, and customer service skills. * Extreme attention to detail and quality * Ability to follow verbal directions in a fast-paced and dynamic environment * Flexible Schedule * Reliable Transportation

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Operate utility construction equipment to dig and backfill excavations for installation, operation, maintenance and repair of water and wastewater utility facilities. Installs, maintains, repairs and operates water and wastewater utility facilities and grounds by performing responsibilities assigned. Primary Duties/Responsibilities: • Perform routine and preventative maintenance on excavation equipment and forklift, and maintain accurate records of such activities., • Install new or replacement water and wastewater system mains, services, meters, and fire hydrants with all associated appurtenances., • Repair, maintain and/or operate the wastewater collection system, water transmission and distribution system facilities, pump stations, bar screens, buildings, grounds, and associated equipment, i.e., mains services, meters, fire hydrants, valves, etc., • Use and maintain all work equipment in accordance with manufacturer’s recommendations, i.e. jack hammer, air compressor with related tools, tapping machines, portable ditch pumps and electrical generators, pipe locating and leak detection equipment, hand tools, etc., • Knows and abides by company’s safety policy and procedures., • Provides excellent customer service to all external and internal customers., • Use accepted practices and methods of water and wastewater facilities and appurtenances installation or replacement and their proper operation, maintenance and repair., • Perform excavations and restorations related to operation, maintenance and repair of water distribution and wastewater collection system., • Perform hydrant and blow-off flushing, flow tests, leak surveys, and water line locating functions., • Keep accurate daily records of work performed, time worked and materials used., • Ability to work in inclement weather conditions.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Basic computer skills and knowledge of MS Office Suite., • Ability to communicate effectively both orally and in writing., • Good mathematical skills, including ability to calculate volumes and pressures., • Ability to read and interpret maps., • Ability to understand policies and procedures relating to utility 1 duties., • Ability to drive to job site, walk for extended periods on flat and uneven terrain, climb bend and stoop., • Ability to lift 50 lbs. and on occasion up to 100 lbs. Additional Information Pay Range: $26.50 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Ground keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Title: EHS Manager Department: Health and Environmental Safety Reports To: Director, Environmental Health and Safety Position Type: Staff Position Summary: Providing a safe and healthful work environment for NJIT students, faculty, staff, and guests is a core value of the department. Similarly, achieving a high level of compliance with the numerous Environmental Health and Safety (EHS) regulations, guidelines, statutes, and standards is a priority. As the NJIT research portfolio has expanded in recent years, and new faculty hires have implemented more complex research initiatives, the EHS department requires the expertise needed to help facilitate safe and compliant research on the NJIT campus. Reporting to the Director, the Environmental Health and Safety Manager will develop, implement, and administer those EHS programs required to assure occupational safety, life safety, and environmental compliance across the spectrum of NJIT operations. Primary responsibilities include fostering a "culture of safety" across all operational disciplines of NJIT and among NJIT students, faculty, and staff. The incumbent will be principally responsible for providing a wide variety of EHS services; overseeing routine and non-routine EHS projects, investigations, and inspections; maintaining accurate recordkeeping; generating professional EHS reports; liaising with the EHS regulatory community; and providing follow up documentation to all levels of the NJIT community. Essential Functions: Program Development and Implementation: Review relevant regulations and guidelines as well as currently implemented programs to develop and implement improved, up-to-date, and compliant programs in various areas of environmental health, occupational safety, and life safety. Examples of program areas include, but are not limited to, respiratory protection, hearing conservation, electrical safety, indoor air quality, confined space, and asbestos management. Manage EHS Consultants: Oversee and manage EHS consultants including but not limited to Marsh Risk Consulting, Options Environmental, RyCon Solutions, and Proactive Environmental. Oversight to include establishing scope of work, developing consulting agreement and purchase orders, management of individual consulting projects, invoice and budget management, and general project management responsibilities. Review and Approve Purchase Requisitions: approve purchases of chemicals, substances and equipment entered by other departments (campus wide) and provide feedback on regulatory and procedural needs associated with such purchases. Provide timely approval (or rejection) of the purchase requisition and work with the purchaser to assure all requirements are established and met. Controlled Substances: Implementation of US DEA and State of NJ Controlled and Dangerous Substances regulations as applied to academic research operations and laboratory animal experimentation. Waste Disposal: Manages/coordinates the collection, storage and disposal of all waste streams generated from NJIT labs and shops in conformance with US EPA and NJ DEP regulations. Assesses or coordinates assessment of waste storage or staging areas as required by local or state regulations. Trains applicable lab or shop personnel on requirements and communicates mitigation action when warranted. Biological Safety: Assists or manages the university's biological safety program, in conformance with applicable regulatory requirements in NJIT laboratories. Duties may also involve acting as the NJIT Biological Safety Office (BSO) or Assistant BSO and will include (but are not limited to): -Provide technical support and expertise in the administration and maintenance of such programs. -Help develop, implement and manage policies, procedures and programs that promote a safe, responsible, healthy and compliant work environment for all faculty, staff and students. -Offer service, technical support and compliance guidance to the University, act as a liaison with the University and external agencies and is the lead authority on biological risk assessments associated with campus research and teaching laboratories. -Manage and monitor programs, procedures, and policies that assure safety and compliance for Research Committee support (e.g., Institutional Biosafety Committee (IBC), Institutional Animal Care and Use Committee (IACUC) and Animal Users Health and Safety Program (AUHSP) Working Group). -Lead member on the emergency response team for biosafety incident response and emergency planning. -Helps interpret guidance and communication from CDC, USDA, NIH, OSHA, DOH, DEC and other agencies as applicable to biosafety. Laser Safety: Implements the OSHA Technical Manual for LASER safety in NJIT laboratories. Includes training, lab inspections, corrective measures, and consultations with laboratory researchers. Requires the completion of an accredited LASER Safety Officer training program. Hazard Communication and Right-to-Know (RTK): Manages or coordinates university compliance with applicable local, state and federal regulations regarding chemical or hazardous substances use/storage. Ensures the university submits and annual RTK survey as required and works with chemical users to ensure they maintain chemical inventories, SDSs, labeling and store chemicals properly. Provides or coordinates training of all applicable staff and students on campus. Facility Maintenance and Contractor Safety: Administer NJIT's overall safety program as applied to both in-house and external vendors performing facility maintenance activities on the NJIT campus. Responsibilities include the application of applicable OSHA standards, as well as other regulatory statutes and guidelines, to facility maintenance activities on the NJIT campus. Includes training, inspections, attendance at project meetings, follow up with appropriate REDCO managers to facilitate corrective measures. Regulatory Compliance: Various compliance activities related to multiple federal, state, and local regulatory agencies including US EPA, US NRC, NJ PEOSH, NJ DEP, NJ DOH, NJ DCA, and City of Newark. Laboratory Safety: Manages and implements multiple elements of the NJIT laboratory safety program in assigned laboratory facilities including chemical hygiene, particularly hazardous substances, hazard communication, caution signs, right to know, emergency response, and regulated waste disposal. Assist departments, centers and colleges prepare for scheduled inspections and accreditation visits. Laboratory and Shop Inspections: Identify deficiencies in EHS programs and practices through an organized system of inspections, investigations, and associated recordkeeping and follow-up. Inspections to include buildings, research and instructional laboratories, academic and maintenance shops, work areas, mechanical rooms, renovations, chemical substances, safety practices and equipment, fire extinguishers and suppression systems. Inspect all areas of the campus for safety conditions, document and report such conditions using EHS comprehensive inspection checklists. Provide recommendations to correct unsafe conditions and improve safety follow through to ensure that hazardous conditions have been mitigated. Sampling: Collect environmental/industrial hygiene samples in support of EHS investigations and inspections. Calibration and use of multiple direct-read electronic instruments as well as air and bioaerosol sampling devices. Interpretation of sampling results and incorporation of results into EHS reports and summaries. Collection of drinking water samples in support of NJIT's drinking water sampling protocol and posting of sampling results on the EHS website. Work with EHS consultants on environmental sampling protocols as required. Supervision: Provide management and oversight of EHS personnel including student workers and EHS Coordinators for specific projects and general EHS duties. Supervision of future EHS employees as program needs develop such as future EHS technician(s). Industrial Safety: Manages and implements the NJIT industrial safety programs in non-lab environments including Makerspace, Facility Services shops, and other large-format facilities. In additional to traditional industrial applications, LASER cutting, metallic deposition, additive manufacturing, and other emerging industrial techniques are overseen. Confined Space: Maintains listing of NJIT confined spaces and provides training and oversight to NJIT and outside vendors regarding permit-required confined spaces. Coordinates with outside risk management consulting firm. EHS Training: Co-manage with EHS colleagues the development and implementation of EHS training programs for a variety of programmatic areas. Ability to pivot to on-line training if required. Develop new and compliant training material as required. Deliver monthly EHS training to the campus community in both on-line and in-person formats. Maintain up-to-date training schedule on the EHS website. Maintain up-to-date training records on the EHS shared drives. Respond to queries from the campus community regarding upcoming trainings, training schedules, and training records. Laboratory Engineering Controls: Co-manage with EHS colleagues the administration of testing, monitoring, and inspection/repair of chemical fumes hoods installed in NJIT laboratories in conformance with ASHRAE guidelines. Supervises and oversees measurement and testing data collected by NJIT student workers and coordinates required repair, re-balance, and re-testing with NJIT Facility Services, Design and Construction, and outside mechanical vendors. Responsible for instrumentation including maintaining calibration and quality assurance. Toxic Substances (TXS) and Hazardous Air Pollutants (HAPs): Co-manage with EHS colleagues the maintenance of distribution logs and use calculations for 13 toxic substances (TXS) and approximately 200 hazardous air pollutants (HAPs) maintained in NJIT laboratories and utilized in NJIT laboratory fume hoods requiring calculations to determine potential evaporation rates as related to NJIT's air pollution control requirements. Manage Signature Programs: Manage all aspects of NJIT's radiation safety program, radioactive waste disposal program, confined space program, controlled substance program, LASER safety program, and shop safety program. In addition to programmatic/technical responsibilities, duties to also include obtaining consultant/vendor proposals, executing NJIT Professional Services Consulting Agreement, establishing purchase orders in Uni-market, managing vendor invoicing, and project management and budgeting. Campus Communication: Meet with various members of the campus community (including students, staff, faculty, and administration) to discuss a wide variety of EHS issues. Departmental and NJIT Committee Meetings: attend and represent EHS at a variety of forums including university committees and councils. Generate original content for EHS website and other outlets highlighting EHS programs and services available to the university community. Maintain up-to-date EHS information on departmental website including training schedules, sampling results, program and procedural information. NJIT EHS Website: Work to help continually improve EHS website with updated content and information. Professional Development: Maintain membership and participate in professional organizations and associations related to EHS responsibilities. Network with EHS professionals at comparable institutions and organizations. Leverage relationships and knowledge gained to further NJIT's EHS goals and objectives. General EHS Responsibilities: In addition to the specific programmatic responsibilities previously described, general oversight, inspection, and auditing of university operations in terms of chemical hygiene, indoor air quality, lab and shop safety, accident and injury prevention, emergency response, occupational safety, and construction safety including required sampling, record keeping, report writing, data management, and required follow up. Campus-Wide Responsibilities: In addition to the general and specific programmatic responsibilities previously described, the EHS Manager position includes the implementation of environmental and occupational health and safety programs throughout all aspects of NJIT's academic and operational enterprise. Additional Functions: -Demonstrate initiative, independence, and sound decision making in support of EHS and Facilities Operations or NJIT goals and objectives. -Ability to work independently under general direction and complete projects in a timely manner. -Maintain contact with vendors and consultants, maintain records related to departmental expenditures to support EHS budget management especially in signature program areas. -Pursue advanced training in support of EHS and REDCO goals and objectives leading to certification in one or more program areas. -Supervise student workers, EHS Coordinator(s), and/or EHS Technician(s). -Be available for occasional off-hour planned or emergency response activities, training, or other activities, as required. -Working knowledge of multiple EHS disciplines. Ability to fill in for other EHS group members as required. -Other duties as assigned. Prerequisite Qualifications: -Requires a bachelor's degree in a physical, chemical, engineering, or life science. -Six (6) years of experience in environmental and/or occupational health and safety. -OSHA 40-hour HAZWOPER/DOT certification and refresher training required. -Knowledge in administering occupational health programs and emergency management required. -Knowledge of US EPA, NJ DEP and NJ PEOSH regulations required. -Must be able to lift 50 pounds. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: -Master's degree in physical, chemical, engineering, or life science preferred. -Bio-Safety experience, training or credentials. -Air Permitting experience, training or credentials. Bargaining Unit: PSA Range/Band: 23 Salary Information: In compliance with the NJ Pay Transparency Law, the negotiated annual salary range for this position is $63,754.42-$119,012.58 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. To learn more about the comprehensive benefits NJIT offers for this position, please visit our benefits page: . FLSA: Exempt Full-Time Apply NowShare Save Job

Job Description Job SummaryWe are seeking a Sitework Foreman to join our team! Responsibilities • Directing and supervising labor crews and equipment operators, • Reading and interpreting plans, grades, and specs, • Coordinating with project managers, inspectors, and subcontractors, • Ensuring safety standards are followed, • Tracking progress and reporting daily production, • Troubleshooting field issues in real time Type of work:, • Excavation and grading, • Installation of utilities (storm, sanitary, water), • Roadwork, curbs, and sidewalks, • Drainage systems, • Site prep for paving or foundationsQualifications, • Previous experience as a Foreman or similar position is preferred, • Deep understanding of work optimization methods, • Strong verbal and written communication skills, • Strong leadership and crisis management skills, • Knowledge of all relevant safety regulations

Job DescriptionSummary: We are representing a well-established, multi-discipline civil engineering and land surveying firm seeking a Civil Engineer to support land development projects across the greater Central New Jersey region. This role focuses heavily on site development design using Civil 3D and is ideal for engineers who enjoy hands-on production work across grading, drainage, utilities, and permitting workflows. The position supports private-sector commercial, residential, and mixed-use developments and offers strong exposure to full-cycle civil design. This is a strong opportunity for a technically driven engineer looking to grow within a stable regional firm known for long-standing municipal relationships and steady project flow. Key Responsibilities: Prepare civil engineering plans and construction documents using AutoCAD Civil 3D Perform site grading, drainage, and stormwater management design Develop utility layouts including sanitary sewer, storm systems, and water mains Support engineering calculations, reports, and permitting submissions Coordinate with survey teams and internal disciplines to ensure accurate plan integration Address municipal review comments and revise plans as needed Implement redlines and assist with internal quality control processes Support project delivery from concept through construction documentation Qualifications: 5+ years of civil engineering experience with a strong focus on land development Advanced AutoCAD Civil 3D proficiency in a production environment Experience with grading, drainage, and site layout design Familiarity with municipal permitting and agency review processes Bachelor’s degree in Civil Engineering required EIT preferred or actively pursuing PE licensure Strong technical communication and organizational skills Ability to manage multiple design tasks in a collaborative team environment Compensation + Benefits: Competitive salary aligned with Central NJ market expectations ($85K–$115K typical range) Medical, dental, and vision insurance 401(k) plan Paid holidays and PTO Long-term growth within a stable, regionally established engineering firm Hands-on mentorship and strong Civil 3D technical development

Job DescriptionTitle: Stationary EngineerLocation: Linden NJ (on-site)Visa: USC/GC Only Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description● Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management.●Performs duties as assigned by the Facility Manager and/or Gold Seal●Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment.●Coordinates both internal and external resources for maintenance of the facility.●Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines.●Performs preventative maintenance on equipment to maintain in good working condition.● Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PM’s) related to machine overhauls and repairs.● Performs other duties as assigned.WHAT'S ON THE MENU● Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment.● Takes a leadership role on the emergency response team in the event of release of hazardous chemicals.● Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS● High school diploma or GED required.● Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques.● Basic knowledge in programmable logic controllers (PLCs) preferred.● Demonstrated knowledge and application of best practices in maintenance and safety management.● Knowledge of state and federal regulatory requirements as related to plant and utilities systems’ operations, safety, and environmental agencies.● Knowledge of best available energy management practices and procedures.● Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed.● Requires

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Eurofins PSS seeks a Laboratory Instrument Coordination Specialist to support our client’s Department of Pharmaceutical Analysis and Digital Technologies in their Rahway, NJ facility. In this position, you will work with the metrology and validation team within analytical laboratories to support cGMP operations. The responsibilities of the candidate include but are not limited to: • Supporting/overseeing instrument maintenance, calibration, and qualification including HPLCs, Plate Readers, balances, FTIRs, etc., • Reviewing and filing documents consistent with cGMP record keeping, • Maintaining inventory of laboratory instruments utilizing various applications, • Supporting in new laboratory system installations & Qualifications, • Liaises closely with cross-functional teams to support compliance activities, • Authoring change controls and deviations when necessary, • Carries out all assignments to the standards of efficiency, innovation, accuracy and safety in accordance with applicable requirements, • The role may require utilizing a company vehicle (car) to transport materials onsiteQualifications Minimum requirements: • Completed Bachelors degree in a scientific concentration, • At least two years’ experience working in a cGMP environment, • Proficient with Microsoft Office products, • Valid Drivers License, the role may require utilizing a company vehicle (car) to transport materials onsite, • Strong time management and organizational skills, • Excellent oral and written communication skills, • Experience supporting analytical laboratory equipment including but not limited to balances, calibration weights, pH meters, Liquid Chromatographs (LCs) and Gas Chromatographs (GCs) Additional Information Position is full-time, Monday-Friday 8am-5pm with weekend work as needed. Candidates currently living within a commutable distance of Rahway, NJ are encouraged to apply. The compensation range for this role is between $24-29/hr based on experience. • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job Description Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast. Spark is growing fast and plans to open a significant number of modern car wash locations throughout NJ, NY, and PA. Spark’s success is driven by a relentless focus on making the car wash an energizing experience for all, delivering a consistently excellent experience for customers and creating an enriching environment for employees. Guided by our values, Spark’s vision is to become the largest car wash operator in the region and the premier car wash brand in the market. Position Summary The Product Manager (Operations & Systems) is a cross-functional leader responsible for the technical and operational heartbeat of Spark Car Wash. This role ensures that our customer-facing technology (POS) and our physical output (Wash Quality) are perfectly synchronized. You will serve as the primary architect for site-level system setups, the lead educator for General Managers on operational technology, and the objective voice of performance through rigorous Facilities Management (FM) and Wash Quality reporting. Your goal is to eliminate operational friction and guarantee a premium, consistent experience across all locations through data transparency and high standards. Essential Functions • System Deployment: Lead the end-to-end setup and configuration of Point of Sale (POS) hardware and software for new site commissions and existing site refreshes., • Operational Training: Design and execute comprehensive training programs for General Managers (GMs) focusing on POS utilization, member management, and site-level troubleshooting., • Quality Governance: Conduct systematic Wash Quality Inspections to ensure mechanical, chemical, and systemic components produce a vehicle output that meets the "High Wash Quality Standard.", • Performance Auditing: Develop and distribute "Transparency FM Performance" reports that objectively measure equipment uptime, maintenance completion, and site-level technical compliance., • Data Strategy: Maintain and iterate on Wash and FM Reporting dashboards to provide executive leadership with a "single source of truth" regarding site health and production efficiency. Job Requirements • High school diploma or GED preferred., • Strong organizational, analytical, and problem-solving abilities., • Ability to work independently and adapt quickly to changing priorities in a fast-paced environment., • Basic computer proficiency with common business software and systems., • Deep functional knowledge of car wash industry POS systems and their integration with tunnel controllers., • Excellent communication and teamwork skills, with the ability to collaborate effectively across site leadership and staff., • Proven train-the-trainer capability, translating complex technical processes into clear, repeatable workflows for General Managers and site teams., • Strong attention to detail with a high-quality mindset, maintaining high standards for wash output, equipment performance, and facility maintenance., • Ability to deliver candid performance feedback to site leadership while maintaining a collaborative and solution-focused approach., • Demonstrated ability to diagnose tunnel performance, identifying subtle deviations in chemical titration, water pressure, and brush timing that impact wash quality., • Must be willing and able to travel regularly throughout NJ, NY, and PA as required, • Valid driver’s license and clean driving record and be able to meet our MVR requirements Physical Job Requirements: • Physically capable of lifting to 75 lbs. and working on your feet for extended periods., • Competitive hourly pay with uncapped commission earning potential, • Comprehensive health, dental, and vision insurance, • 120 hours PTO, • Retirement savings plan with company match, • Employee Car Wash Plan

Job Description High-Rise Restoration, Forensics & Building Envelope Engineering A leading structural engineering and building restoration consulting firm is seeking a Director of Structural Engineering to lead complex restoration and forensic engineering projects. This role is focused on high-rise residential, commercial, and mixed-use buildings, with an emphasis on façade restoration, structural rehabilitation, and compliance-driven inspections. The ideal candidate will bring strong technical leadership, forensic expertise, and experience navigating New York City building regulations and inspection requirements. Key Responsibilities • Lead structural engineering and restoration projects across New York City and surrounding markets, • Serve as Engineer of Record and provide technical oversight for all structural deliverables, • Manage multidisciplinary teams and oversee day-to-day engineering operations, • Lead façade assessments, structural evaluations, Local Law compliance inspections, and restoration programs, • Prepare and review engineering reports, calculations, specifications, and construction documents, • Conduct forensic investigations involving structural failures, building movement, water infiltration, and construction defects, • Oversee construction administration including field observations, RFIs, submittals, and contractor coordination, • Maintain quality assurance and technical consistency across all projects, • Develop client relationships with property owners, developers, condominium boards, and asset managers, • Mentor engineering staff and support strategic growth initiatives RequirementsQualifications • Bachelor’s or Master’s degree in Structural or Civil Engineering, • PE license in New York required; SE license preferred, • 8+ years of experience in structural engineering and building restoration, • Strong experience with NYC high-rise buildings, façade systems, and Local Law inspections preferred, • Expertise in structural analysis, restoration detailing, and forensic engineering, • Strong understanding of NYC Building Code, ASCE, ACI, AISC, and building envelope systems, • Proficiency with ETABS, RAM, SAFE, RISA, Revit, and restoration documentation, • Excellent communication, leadership, and project management skills BenefitsCompensation & Growth • Base salary range: $150,000–$230,000 depending on experience, • Annual performance bonus, • Executive leadership growth opportunity, • Opportunity to lead flagship restoration and forensic projects in the New York market

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description In-Home Sales Specialist Full-Time | New Jersey Base Pay + Uncapped Commission | Paid Training Northeast Power Dry is a fast-growing restoration company helping homeowners recover from water, mold, and property damage emergencies. We are looking for a motivated, customer-focused In-Home Sales Specialist to meet with homeowners, provide restoration solutions, and close sales opportunities generated through company-provided leads. This is a field-based role where you’ll work directly with homeowners in their homes following emergency property damage situations. No cold calling required — all leads are company-generated. If you thrive in a fast-paced environment, enjoy helping people, and want unlimited earning potential, this is an excellent opportunity to build a long-term career with a growing company. What You’ll Do • Meet with homeowners at scheduled in-home appointments, • Inspect property damage and provide restoration estimates and solutions, • Build trust with customers and close sales during the appointment process, • Guide customers through the restoration process with professionalism and empathy, • Coordinate with production and remediation teams to ensure project success, • Communicate with customers, insurance carriers, and internal teams regarding project updates, • Complete required documentation accurately and in a timely manner, • Respond promptly to new leads and customer needs, • 3+ years of sales experience with a proven ability to close deals, • Strong communication and relationship-building skills, • Self-motivated and comfortable working independently in the field, • Ability to manage time effectively and prioritize multiple projects, • Comfortable working in a fast-paced, emergency service environment, • Valid driver’s license and reliable transportation, • Basic computer and technology proficiency, • In-home sales experience, • Restoration, construction, remediation, or other blue-collar industry experience, • Experience working with insurance claims or property damage projects, • Medical, dental, and vision insurance, • 401(k) with company match, • Weekly pay, • Competitive base pay + uncapped commission opportunities, • Paid training and ongoing development, • Paid time off and paid holidays, • Referral bonus program, • Company vehicle, gas card, and iPad for eligible roles, • Career advancement opportunities Since 1996, Northeast Power Dry has been committed to serving homeowners and businesses through exceptional restoration and reconstruction services. We pride ourselves on maintaining a strong company culture, providing growth opportunities for our employees, and delivering outstanding service to our customers. We are an equal opportunity employer and value diversity in the workplace.

Job DescriptionArea Maintenance Manager – Residential (Jersey City, NJ) Location: Jersey City, NJ Property Type: Large-scale multifamily residential community (1,100+ units | multiple buildings) About the Role The Area Maintenance Manager is a senior, hands-on leadership role responsible for directing all maintenance operations for a large, multi-building residential community exceeding 1,100 units in Jersey City, NJ. This Area Maintenance Manager role requires a leader who has already operated at similar scale and can immediately oversee people, processes, and complex building systems in a high-demand environment. This position is not a step-up or training role. The Area Maintenance Manager must bring proven experience leading maintenance teams, managing large-scale multifamily operations, and providing technical oversight for complex residential systems from day one. Key Responsibilities of the Area Maintenance Manager * Lead, supervise, schedule, and develop on-site maintenance teams supporting a high-density, multi-building residential community * Oversee all day-to-day maintenance operations including work orders, preventive maintenance programs, unit turns, inspections, and emergency response * Provide technical oversight and troubleshooting for complex building systems, including: * HVAC systems (boilers, chillers, cooling towers, heat pumps, rooftop units) * Plumbing systems (domestic water, hot water, waste, and storm systems) * Electrical systems, generators, and emergency power systems * Fire/life safety systems and building automation systems * Ensure compliance with all local, state, and federal safety, housing, and building regulations * Manage vendor relationships, service contracts, and capital repair and preventive maintenance projects * Partner closely with Property Management and Asset Management teams to support resident satisfaction and operational performance * Track KPIs, manage maintenance budgets, control expenses, and support forecasting * Respond to escalated maintenance issues and participate in on-call rotation as required Required Experience & Core Competencies for the Area Maintenance Manager To be successful in this Area Maintenance Manager role, candidates must demonstrate strength across all three areas below: * People Leadership & Communication * Proven experience leading and holding accountable maintenance teams at scale * Strong communication skills with staff, vendors, residents, and internal stakeholders * Large-Scale Multifamily Experience * Direct responsibility for maintenance operations at a large multifamily residential community (strong preference for 700+ units or equivalent complexity) * Experience operating in fast-paced, high-volume residential environments * Technical Expertise * Strong hands-on knowledge of HVAC, plumbing, electrical, and general building systems * Ability to diagnose complex issues and provide technical guidance and oversight to on-site teams Candidates lacking depth in any one of these areas are unlikely to be successful in this Area Maintenance Manager role. Qualifications for the Area Maintenance Manager * 8+ years of progressive experience in multifamily maintenance, including supervisory responsibility * Prior experience overseeing maintenance operations at large residential or mixed-use properties * 2+ years of hands-on experience troubleshooting and repairing complex HVAC and mechanical systems, including water-source heat pumps and boiler systems. * EPA Universal Certification (required) * Must have or be willing to obtain Fire Safety Manager certificate * Strong organizational, prioritization, and problem-solving skills * Ability to lead in a demanding, resident-focused environment Benefits Provided to the Position of Area Maintenance Manager • Competitive Salary of $120,000-150,000 with potential for bonus, • Medical Insurance, • Dental Insurance, • Vision Plan, • 401k Plan, • Life Insurance, • Paid Vacation, • Paid Sick Leave, • Paid Holidays, • Tuition Reimbursement PM21 Powered by JazzHR Jz0341bjiw

Job DescriptionBenefits: • Flexible schedule, • Fun team atmosphere, • Competitive pay, • Flexible hours, • Valuable work experience Responsibilities • Provide swim instruction based on approved curriculum., • Enforce all safety guidelines and regulations, • Rescue swimmers needing assistance and administer First Aid and CPR when necessary., • Visibly inspect pool and swimming areas for cleanliness and possible maintenance issues., • Maintain and ensure proper storage of all pool equipment. Place and remove lane lines., • Report accidents and incidents to management. Complete required documentation and paperwork.Qualifications, • *MUST HAVE WSI Certification via American Red Cross, • High school diploma or GED is preferred., • Experience as a certified lifeguard, swimming instructor, youth sports instructor/coach, camp counselor, or childcare provider is preferred., • Swimming experience preferred., • First aid/CPR certified, • Positive attitude and friendly demeanor, • Willingness to receive training, • Strong swimming abilities preferred

Job DescriptionBenefits: • 401(k), • Dental insurance, • Employee discounts, • Health insurance, • Paid time off, • Vision insurance Position Summary: The Facilities and Operations Coordinator will play a pivotal role in maintaining smooth operations across Orangetheory Fitness studios. Their mission is operational excellence to ensure top quality and production in the studios they oversee. This includes handling all equipment, technology, and facility issues. This position requires the ability to develop strong relationships with outside vendors, create internal processes that can be replicated across the entire company, and stay within budget. The ideal candidate is detail-oriented, organized, and possesses strong communication skills to ensure studio operations run efficiently. This role will report directly to the Studio Operations Manager. This position is on-site to various studios within the assigned Region. Personal Attributes: • Detail oriented and well organized, • Solution-oriented, • Multi-tasker with minimal supervision, • On-call availability due to the possibility of facility or IT issues needing to be resolved as soon as possible, • Proven flexibility and willingness to handle various tasks independently and to meet deadlinesRole Responsibilities/Duties:, • Review and update notes on all open FEXA tickets to monitor progress and resolution., • Reconcile Brex transactions for studio expenses and ensure financial accuracy in collaboration with Multi Unit Managers., • Conduct check-in meetings with cleaning vendors to review service standards and address any issues., • Participate in facilities calls to provide updates and receive feedback on studio maintenance., • Refresh and organize retail displays to maintain visual appeal and promote pre-orders., • Ensure lockbox codes are up-to-date in 1Password for secure access management., • Submit detailed studio walkthrough reports to document and address any operational issues., • Inspect fire extinguishers for accessibility, charge status, and proper functionality., • Verify that water shut-off valves are operational and accessible in case of emergency., • Check AED pads and batteries for expiration dates and proper working condition., • Conduct emergency response training with staff to ensure preparedness., • Maintain communication with Property Managers to update contact information and strengthen relationships., • Coordinate Event Sales Operations (ESO) and manage order fulfillment for studio events., • Order retail merchandise as needed to maintain a consistent member and staff experience., • Ability to lift a minimum of 20 pounds to a maximum of 50 pounds unassisted, • Able to sit, stand, stoop, walk, stretch, reach frequently, • Moderate range of body motionsQualifications:, • Basic facility repair and maintenance experience, • Excellent computer skills, • Strong organizational skills and attention to detail, • Ability to manage multiple tasks and priorities effectively, • Excellent communication and problem-solving abilities, • Field experience in facilities and/or construction, • Proficiency with FEXA, Brex, and 1Password systems preferred, • Ability to travel to different studios throughout the day.Education Requirements:, • Bachelors degree, • 12 years of operations experience, ideally in a fitness settingBeyond The Paycheck, • Make lifelong friends with your team and members. Not only do we impact members lives with our workouts, but we also make an impact beyond the studiowe regularly host classes to support important causes, participate in local runs & events, and work with local charities., • Medical, Dental, Vision, 401K, PTO, • Employee Referral Program earn $250 for every employee you refer and retain to work for Empire!, • Complimentary OTF classes and employee discounts on retail, • Empire cares about youwe offer access to free mental health counseling., • Discounts on theme parks, travel, movies, etc. through LifeMart and TicketsAtWork

Job DescriptionCompany Description Eataly is the world’s largest artisanal Italian food and beverage marketplace! Eataly is not a chain; each Eataly is different, with its own character and own theme – but all with the same aim... for our guests to: • EAT authentic Italian food at our restaurants, cafés and to-go counters, • SHOP a selection of high-quality Italian, local and homemade products, • LEARN through our classes and our team’s product knowledgeJob Description A Table Support Team Member is responsible for creating a high-quality dining experience in Eataly’s restaurants through timely and accurate delivery of meals as well as the organization and cleaning of tables. Reports to the Service Leads and Assistant General Managers. • Greets guests in assigned area; pours beverage as requested; serves bread and olive oil, • Runs food from kitchen to guest tables after ensuring each course to be delivered is complete and accurate, • Runs beverage from bar to guest tables and makes sure water glasses remain filled, • Removes used dishes and silverware from guest tables between courses and after guests leave the table, • Maintains cleanliness of all tables and chairs in assigned service area and resets vacated tables, • Assists servers when needed and understands food descriptions and ingredients of menu items, • 1+ year of experience in a fast-paced restaurant, • Highly organized with excellent time management skills, • Availability to work onsite with a flexible schedule often including evenings, weekends and holidays, • Ability to lift up to 50 pounds, • Ability to exert well-paced mobility for up to 8 hours, including standing, walking, bending and squatting Additional Information Benefits and Perks • Medical, Dental, Vision Insurance, • Paid Time Off, • Paid Parental Leave, • 401K with match or RRSP, • Free family meal daily, • Discounts at Eataly, • Classes on products and Italian cuisine, • and more!

Job Description Exterior Remodeling Service Manager – Coordinate Precision Service Operations for Premium Residential Projects Job Overview * Company: Global Home Improvement. * Salary/Pay Rate: $65,000+ per year (Based on experience). * Job/Employment Type: Full Time. * Location: Feasterville, PA or Springfield, NJ. * Mandatory Licenses & Certifications: None Required. The Opportunity You will serve as the strategic hub of our service department, ensuring that every homeowner receives the high-touch support and technical resolution they expect from a premium remodeler. This role empowers you to own the post-installation experience, managing logistics and technical troubleshooting for elite roofing, siding, and window systems. Your leadership will directly impact customer loyalty and the long-term integrity of our high-end exterior projects. How You Will Make an Impact * Direct the daily operations of the service department by diagnosing technical issues and assigning specialized technicians to appropriate tasks. * Optimize regional service routes across our territory to maximize technician efficiency and reduce response times for our clients. * Synthesize technical data and customer reports to prioritize emergency or weather-sensitive repairs, ensuring rapid property protection. * Collaborate with production and sales teams to identify recurring installation trends and implement proactive quality control solutions. * Manage complex customer communications by translating technical exterior construction requirements into clear, professional expectations for homeowners. * Audit all service documentation within the CRM to ensure accurate warranty tracking and comprehensive project history for every client. Required Qualifications & Experience * Extensive technical knowledge of residential roofing, siding, replacement windows, and integrated waterproofing systems. * Proven ability to diagnose installation failures and water-infiltration issues through project drawings or field reports. * Demonstrated experience in scheduling, dispatching, or logistics management within the construction or remodeling industry. * Proficiency in utilizing CRM systems and mobile technology to manage high-volume service tickets and documentation. * Strong geographical knowledge of the service area to facilitate effective route planning and resource allocation. Preferred Qualifications & Experience * Direct experience managing field service technicians or exterior installation crews. * Advanced understanding of manufacturer warranty processes for Marvin Windows, James Hardie Siding, or premium metal roofing. * Bilingual communication skills to support a diverse range of technicians and customers. * Formal training in construction management or a related technical field. Compensation & Benefits * Competitive annual salary with performance-based incentives and bonuses. * Comprehensive paid time off including vacation days and observed holidays. * Access to company health benefits and professional development opportunities. * Provision of a company phone and computer for streamlined field and office coordination. * Clear pathways for career advancement within a rapidly growing regional leader. About Us Global Home Improvement is a leading exterior remodeling company specializing in premium metal roofing, Marvin Windows, and James Hardie Siding. We foster a results-driven culture rooted in precision, accountability, and outstanding customer service. Learn more at . Global Home Improvement is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors. #OHFC25

Job Description Project Engineer – Structural Steel Full-time | Newark, NJ What’s in it for you • Work on a $1B+ infrastructure project, • Join a top-tier ENR construction environment, • High-impact role across major public works and transit systems, • Exposure to complex builds (bridges, tunnels, water systems) This is a project engineering role focused on structural steel within large-scale infrastructure projects. You’ll support execution across design, procurement, and construction—ensuring projects are buildable, on schedule, and aligned with cost expectations. What you’ll be doing • Coordinate contract, design, and shop drawings to ensure constructability, • Interface with fabricators, subcontractors, and owners to resolve design and procurement issues, • Collaborate with engineering teams to develop means & methods, • Support cost tracking, forecasting, and project financial visibility, • B.S. in Civil Engineering, Construction Management, or equivalent from accredited institution, • Minimum of 5 years experience in structural steel erection, heavy civil construction, bridge, vertical construction, or other steel structures, • Experience actively interfacing with fabricators, subcontractors, & owners to resolve design issues, procurement issues, and constructability issues, • Coordination of contract drawings, design drawings, and shop drawings to facilitate an erectable final structure, • Experience actively interface with design engineers & construction engineers to develop thorough "means & methods" process, • Accurately realize "to-date" costs and project "final" costs thru completion, • Proficiency with MS Office products (Word/Excel), • Excellent written and verbal skills, • No sponsorship at this time

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Responsibilities include but are not limited to the following: • Verify shift transactions against cashier's money on hand during bank drops., • Respond to customer service issues and resolve on the spot., • Maintain order in assigned lot., • Maintain relationships with police department and security personnel., • Supervise employees and serve as liaison between employees and upper management., • Count vehicles on location throughout shift, as needed., • Maintain a neat and clean appearance and arrive and remain in complete uniform before and during scheduled shifts., • Report any unknown, observed or suspected violation of company policy, safety hazards or any unusual occurrence to the managers., • Troubleshoot minor issues with revenue control equipment., • Completing daily inspections of the facility and other required documentation., • Assist with cleanup of debris, water, oil spills and etc., • Substitute for any position, if necessary., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area., • Complete other duties as assigned. Qualifications • Candidates must be at least 18 years old., • Minimal high school diploma or equivalent., • Cashier or parking experience preferred, but not required., • Ability to read and comprehend simple instructions, short correspondence and memos in English., • Ability to apply common sense understanding to carry out detailed but standard written or oral instructions., • Ability to effectively respond positively to customer problems or complaints., • Ability to adapt to changes in the work environment; able to deal with change, delays or unexpected events License Requirement - The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is required to work outside in varying weather conditions (cold, rainy, snowy, harsh, hot, humid). The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $24.00 to $25.00 hr Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact . We are here to assist you.

Job Description The Role Aquarist & Animal Keepers at Liberty Science Center are responsible for the ongoing care and exhibition of the live animal population. They must implement professional husbandry protocols in regards to animal care and exhibit maintenance. They provide all aspects of daily care for the animals, including feeding, maintenance of enclosures and associated life support, enrichment, and health maintenance and treatment. This position reports to the Director of Animal Husbandry. The aquarist will enjoy benefits seldom offered at other facilities. Examples include the opportunity for design creativity with both freshwater and saltwater aquarium systems, cross-training and educational opportunities with mammals, invertebrates, reptiles and amphibians, and the occasional educational and inspirational excursions and seminars. Employees work with a team of kind, helpful, motivated, and dedicated individuals What You’ll Bring You have a strong interest in animals of all kinds, ecology, and informal education. You have the ability and disposition to handle the demands of caring for live animals in a highly public-facing environment and can demonstrate a strong knowledge of husbandry practices. You are detail-oriented, a team player, and a skilled observer who excels at both written and oral communication. You take pride in your work, maintaining high standards of care and providing a rich guest experience through the display and maintenance of live animal exhibits. You are proactive, exercise sound judgment, and respond quickly in emergency situations with appropriate action. You are comfortable working with a wide range of invertebrates, amphibians, reptiles, fishes, birds, and mammals. What You’ll Do The Aquarist will: * Provide and oversee care of the aquatic animal population, totaling 20,000 gallons, with individual aquaria as large as 7,000 gallons * Perform daily cleaning, diet preparation, feedings, enrichment, training & observations of animals, and maintenance of exhibits and life support systems * Assist with ongoing care for the remainder of the live animal population, including invertebrates, reptiles, amphibians, birds, and mammals * Maintain an intimate knowledge of animal health, exhibits, life support system operation, inventory, animal transport, quarantine procedures, species id and compatibility, disease recognition and animal ambassador protocols consistent with the highest standards of animal welfare * Implement high quality standards for exhibits and back of house spaces, maintaining clean, well-organized, and hazard free work areas * Input and maintain accurate records of daily observations and animal care data into databases * Repair and maintenance of life support equipment, including pumps, UV sterilizers, protein skimmers, sand filters, plumbing, etc. * Participate in programs and public activities as directed * Perform lab work, such as regular water quality testing and necropsy as needed * Assist in the planning and operation of specimen collection trips * Collaborate on ideating, developing and producing creative solutions that serve to strengthen LSC’s brand, mission, and revenue * Train, supervise, and evaluate interns and volunteers * Other responsibilities, as assigned Preferred Knowledge, Skills, and Abilities (KSAs) * Candidates should have thorough knowledge of animal husbandry practices, keeper safety, and exhibit and life support system maintenance * Familiarity with aquarium systems including life support systems, aquatic animal husbandry, maintenance needs, and quarantine protocols * Knowledge of water chemistry, biological processes, and water quality analysis * Knowledge of animal care, common health concerns, and treatment * Must be able to work effectively in a team-oriented workplace, as well as engage with the general public * Excellent organizational and time management skills with the ability to set priorities * Plumbing experience Preferred Qualifications * Bachelor’s degree in biological or life sciences, or equivalent training and experience * Candidates should have 1+ years of full-time experience caring for animals in a professional setting * Possession of a valid driver’s license in good standing is required Special Job-Related Requirements * SCUBA certification * Final offer contingent upon the successful outcome of a TB screening Supervisory Responsibilities The aquarist will share supervisory responsibilities of interns and volunteers with other Animal Husbandry Department staff. Location, Classification and Schedule This role will work onsite at Liberty Science Center in Jersey City, NJ. It is a regular full-time, non-exempt position, meaning you are eligible for overtime. This role is eligible for full benefits. Your regular weekly schedule will always include one weekend day. The ideal candidate must be available to work a flexible schedule that includes emergency response, and occasional early mornings, evenings, and holidays. This position is considered an essential service position and will be required to provide services onsite during emergency situations. Physical Demands This position will require significant physical effort on a daily basis such as walking, bending, stooping, climbing ladders, reaching above the head, repetitive motions, lifting and carrying heavy objects (up to 60 pounds), or standing for long periods. This position will require the ability to effectively perform dive procedures in LSC’s aquaria. This position may require the ability to make coordinated gross motor movements in response to changing external stimuli within moderately demanding tolerances. This position requires the ability to withstand exposure to nuts, legumes, and high levels of noises and crowds. This position will involve work in wet or humid environments, from heights, or in confined spaces. This position will require the ability to use and handle hooks, tongs, nets, and other animal handling equipment. This position will include exposure to potentially dangerous animals, including venomous animals. Candidates must have immunocompetence and be able to work in an environment with possible exposure to zoonoses. The Aquarist will at times operate standard office equipment, such as a computer, printer, and phone. In addition, the Aquarist will frequently carry and operate a two-way radio. LSC’s Work Culture at a Glimpse LSC prides itself on fostering a culture that enables all employees to experience a sense of pleasure, passion, and purpose while in the workplace. We believe in embracing and driving change, inspiring fun and learning, and creating a positive and family friendly team spirit. Our differences as individuals (race, gender, age, cultural heritage, physical ability, education and lifestyle) are an asset and contribute to our ability to drive innovation. Lastly, at the heart of our work culture is the commitment to delivering a “wow factor” through our exceptional customer service to not only our guests but also one another. Travel This position requires occasional travel. Our Benefits Liberty Science Center offers generous benefits and perks for all regular full-time employees, which currently includes: * Medical, dental, life, vision, and pet insurance * 403(b) defined contribution retirement plan with an outstanding employer match * Considerable paid time off, including annual leave, sick leave, and federal holidays * Long-term disability coverage * Flexible spending accounts (pre-tax income for eligible health and/or dependent care expenses) * Commuter benefits (pre-tax income for parking or mass transit expenses) * Free parking * 25% discount in the on-site store * 15% discount in on-site cafeteria * LSC family membership

Job Description Ready to build your future? We're Groundworks, North America's leading foundation repair and water management specialist. We're more than a company - we're a team driven by purpose. As a Top Workplace, we're looking for top talent to fuel our mission: to protect, repair, and improve our customers’ greatest asset – their home. But what makes us a great place to work? Here, you'll find real career growth, comprehensive and affordable benefits, a culture that values hard work and innovation, and company ownership equity. Whether you’re starting your career or looking for your next big move, we offer hands-on training, advancement opportunities, and the chance to make a real impact every day. Join us and lay the foundation for your success. Apply today! As an Outside Sales Representative at Groundworks, you are a key driver of our success and the face of our industry-leading brand. In this consultative, in-home sales role, you will meet directly with homeowners to assess their needs, perform detailed inspections, and design customized foundation repair and water management solutions using our proven systems and services. This opportunity is built for ambitious, customer-focused professionals who are driven to perform at a high level. You’ll have the autonomy to build your own book of business backed by the resources, reputation and operational support of a global market leader. Unleash Your Potential • Full-Time, W-2 position, • Manage and grow your sales territory, • Uncapped earning potential – Avg. $100-150k, • Top performers exceeded average earnings – $200-600k, • Training pay $750 p/week, • Company-generated leads – no cold calling required, • Increased commission on self-generated business, • Self-generation training: clover, trade shows, lunch and learns, networking, • Company car and fuel card eligibility, • Clear advancement pathways - promote from within led culture, • Comprehensive technical training to ensure success What You’ll Do • Travel remotely within sales territory to conduct in-home inspections, • Utilize warm pre-qualified leads to develop and maintain a book of business, • Diagnose and educate homeowners on the issues they have in their home and provide solution options, • Estimate the repairs and provide homeowners with generated job proposals, • Close sales with customers in the home, • Maintain relationships with customers while tracking sales lead pipeline, • Report to home branch for Sales team initiatives and meetings What You Bring • Entrepreneurial attitude focused on driving performance and customer satisfaction, • 1-2 years of sales experience preferred but not required, • Experience in a commission, B2C or in-home sales environment is a plus, • Experience in construction or home improvement is a plus Benefits Overview • Equity Ownership, • 401k with Company match, • Health, Vision, Dental, Long/Short Term Disability, Life Insurance (US), • Enhanced Benefit Options Available (CA) What We Provide * Competitive Pay * Employee Company Ownership Opportunities * Industry Leading Training Programs * Leadership Development and Career Growth Tracks * Comprehensive and Affordable Benefits Package * Top Workplace with Award Winning Culture Company DescriptionOur Tribe As the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference. Our strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before. Today, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.Our Tribe\r\n\r\nAs the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference.\r\n\r\nOur strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before.\r\n\r\nToday, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.

Job DescriptionSenior Maintenance Manager – Residential (Jersey City, NJ) Location: Jersey City, NJ Property Type: Large-scale multifamily residential community (1,100+ units | multiple buildings)About the Role The Senior Maintenance Manager is the lead maintenance professional responsible for overseeing all maintenance operations at a large, high-density residential community in Jersey City, NJ. This is a hands-on leadership role ideal for an experienced maintenance leader who can effectively manage people, processes, and complex building systems in a demanding, resident-focused environment. Why this role stands out: • Opportunity to lead maintenance operations at one of the region’s largest residential communities, • High-impact role with visibility to senior leadership, • Strong team environment with opportunity for long-term growth within BLT Key Responsibilities of the Senior Maintenance Manager:, • Lead, supervise, schedule, and develop a maintenance team of approximately 12-15 employees across multiple buildings, • Oversee all day-to-day maintenance operations including work orders, preventive maintenance programs, unit turns, inspections, and emergency response, • Ensure timely completion of service requests and high-quality execution of all maintenance work, • Provide technical oversight and troubleshooting for major building systems, including:, • HVAC systems (boilers, chillers, cooling towers, heat pumps, rooftop units), • Plumbing systems (domestic water, hot water, waste, and storm systems), • Electrical systems, generators, and emergency power systems, • Fire/life safety systems and building automation systems, • Ensure compliance with all local, state, and federal safety, housing, and building regulations, • Manage vendor relationships, service contracts, and maintenance-related projects, • Partner closely with Property Management and Asset Management to support resident satisfaction and operational performance, • Track KPIs, manage maintenance budgets, control expenses, and support forecasting, • Proven experience leading and developing maintenance teams, • Strong communication skills with staff, vendors, residents, and internal stakeholders Large-Scale Multifamily Experience, • Experience supporting or leading maintenance operations at large residential communities (700+ units or similar complexity preferred), • Ability to operate in fast-paced, high-volume environments Technical Expertise, • Strong hands-on knowledge of HVAC, plumbing, electrical, and building systems, • Ability to diagnose complex issues and provide technical leadership to on-site teams Qualifications of the Senior Maintenance Manager:, • 7+ years of progressive experience in multifamily maintenance, including supervisory responsibility, • Experience working on large residential or mixed-use properties, • Hands-on experience troubleshooting and repairing HVAC and mechanical systems (heat pumps, boilers, etc.), • EPA Universal Certification (required), • Must have or be willing to obtain Fire Safety Manager certificate, • Strong organizational, prioritization, and problem-solving skills, • Ability to lead in a demanding, resident-focused environment Compensation & Benefits for the Senior Maintenance Manager:, • Competitive Salary of $100,000–130,000 with potential for bonus, • Medical Insurance, • Dental Insurance, • Vision Plan, • 401k Plan, • Life Insurance, • Paid Vacation, • Paid Sick Leave, • Paid Holidays, • Tuition Reimbursement Powered by JazzHR owi0FpM3VQ

Job DescriptionDescription: JOB DESCRIPTION Guardian Service Industries Inc. is looking for a qualified employee to start working as Live In - Superintendent at one of our location in Jersey City, NJ 07306. POSITION SUMMARY: This position assumes total responsibility for the “physical plant.” Closely monitors, identifies and communicates problems in every phase of general maintenance of the building(s), including areas of carpentry, electrical work, HVAC, plumbing, mechanic, painting, flooring, patching, general hardware, other minor building repairs and cleanliness. Makes recommendations, performs repairs, replacement maintenance and implements preventive maintenance as established by Company procedures and guidelines. The successful candidate must have an understanding of how these systems function and be capable of performing corrective measures. The individual shall ensure that all these activities are executed in a controlled and proven way that ensures limited or uninterrupted integrity of the MEP systems that support the complex. This includes resetting alarms, operating transfer switches, starting back-up systems, etc. He or she will also be responsible for the supervision of all the buildings operations and manage all service contract providers that support the facilities infrastructure systems. *Salary: $32/hr *Mon - Fri *8:00am - 4:30pm (subject to change) POSITION RESPONSIBILITIES: • Inspects all common rooms (i.e. Residents Lounge, Fitness center, Playroom) for additional attention by porters., • Inspect lobbies and various hallways for additional attention by porters., • Inspects grounds/property around buildings for additional attention by porters., • Checks Desk Logs in Connect and assigns work order to potters and handymen., • Monitor completion of Work Orders by Handymen as to job performance., • Insert pricing for parts and/or labor on completed work orders and submits to management Office for close-out and billing., • Meets with management at the start and end of each day to discuss the day to day operations., • Submits weekly payroll to management using Employee Time Management module., • Assist in preparation for and attendance at Board Workshops as requested., • Assist in preparation for and attendance at Open Board Meetings as requested., • Approve building staff vacations as per allowance for each., • First review of all Unit Alteration Agreements followed by review with Property Manager., • Schedule water/sprinkler system shutdowns as requested by Unit Owners) or contractor their contractors) and coordinate advance notice to affected residents., • Personally attend to leak investigations with maintenance staff., • Assist with preparation and conducting of building social events., • Meet with Residents renting the Residential Lounge and arrange for preparation of space as needed within the guidelines for the sue of the space., • Supervises trains and directs maintenance staff through work orders., • Maintains a safe and secure environment throughout the building(s)., • Ensure there is appropriate 24/7/365 coverage and emergency response to infrastructure., • Plans, monitors, and appraises job results; coaches, counsels and disciplines employees., • Monitor staff appearance with respect to uniforms and general appearance., • Schedules and assigns work responsibilities to employees to meet shift requirements., • Assesses repair needs and estimated time needed for repair (including evaluating problems to determine whether or not professional assistance or further instruction is needed in order to complete task/repair)., • Monitors the functions of service contractors and building repair and maintenance contractors., • Inventories and acquisitions maintenance supplies., • Maintains disaster preparedness by identifying potential problems, developing response plans, managing crises., • Completes reports/work orders of repairs (work needed)., • Requests materials, tools, and supplies needed for a job., • Administrates preventive/reactive maintenance schedule., • Records and evaluates preventive maintenance activities and programs., • Analyzing energy consumption and finding ways to reduce usage., • Respond to any mechanical, medical or police emergencies and assist as necessary., • Oversees or participates in construction, installation, and preventative maintenance of equipment., • Assist property manager with major building projects as needed and attend meetings on same., • Performs maintenance replacement and repair in areas of carpentry, electrical work, plumbing, mechanical, painting, flooring, and other minor building repairs as long as a permit is not required to conduct the job., • Ability to properly utilize new equipment and follow safety procedures prior to using this equipment., • All employees must maintain their assigned areas in a neat and safe manner. All safety procedures must be maintained and adhered to. Any safety issues must be brought to the attention of the Property Manager immediately., • Supervise all moves, deliveries and check on the status of all unit owner construction, ensuring that everything proceeds smoothly according to the properties Regulations, reporting any damage to common areas immediately to the Property Manager., • Report to the Property Manager any problems as soon as possible, recording all irregularities on an Incident Report., • Black Seal License,, • Fire Safety Director License,, • Driver’s License,, • Universal EPA certified,, • Low Pressure Boiler Black Seal, *7 Year Experience The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Leadership roles, • Flexible hours, • Great pay, • Valuable work experience, • Increased social opportunities, • Future references/referralsRequirements:, • Ability to work with children, • Excellent interpersonal communication and organizational skills, • Provides swim instruction based on the Goldfish Swim School curriculum., • Enforces safety rules and regulations to prevent accidents. Makes rescues and administers first aid when necessary., • Evaluates students progress, and completes required paperwork in a timely manner., • Interacts with parents/guardians on the activities and development of students swim skills., • Acts as a GSS ambassador to ensure parental satisfaction., • Uses problem solving and creative thinking skills to identify and resolve challenges that students encounter., • Inspects pool areas before and after each class for possible maintenance, cleanliness or damage issues. Reports issues to management as appropriate., • Maintains and ensures proper storage of all pool equipment. Places and removes lane lines., • Reports accidents and incidents to management. Completes required documentation and paperwork., • Performs Deck Teacher duties as needed., • Performs light cleaning duties such as window washing, deck mopping, trash removal etc. on occasion., • Attend required/mandatory workshops and in-service training outside of regular working hours.

Job Description Hazen and Sawyer is seeking an HVAC Engineer for our Iselin, NJ office. As part of our HVAC/Plumbing team the selected candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs for some of the nation's most challenging and rewarding projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals.Key Responsibilities: This role focuses on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs, • Hot water boiler and chilled water system design It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to join Hazen’s HVAC/Plumbing group. The candidate will work with project lead engineers to produce BIM (Revit) models, families, and contract drawings for the HVAC/Plumbing discipline. The ideal candidate is a team player and self-starter with exceptional organizational skills and has the ability to work independently, as well as in a team environment. The candidate must be detail oriented and have good communication and interpersonal skills. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Preparing plan, section, isometric, and detail drawings for various HVAC/Plumbing systems., • Coordinating with the other disciplines (Structural, Architectural, Process Mechanical, Electrical, I&C, Site Civil) regarding the HVAC/Plumbing design, • Performing BIM model clash detection., • Ensuring HVAC/Plumbing models meet Hazen design standards., • Ensuring compliance with the established Hazen and/or client CADBIM standards., • Providing input on CAD/BIM standards and workflows., • Minimum 2 years’ experience using Revit., • Proven proficiency in Revit and knowledge in design drawing production., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Are you looking for a company with unlimited compensation opportunity, weekly pay, and advancement to management roles? Leaf Home Water Solutions, a division of Leaf Home is looking to grow our team of Outside Sales Representatives TODAY! Why Work with Leaf Home Water Solutions? Working with Leaf Home Water Solutions is more than just another job - it is an opportunity to earn a sizable and consistent income, the freedom to grow your career on your terms, and a chance to put down roots in your community. We will supply you with pre-qualified leads and the necessary tools for success so you can set out and start earning!! While you’re helping homeowners by providing clean, healthy and sustainable water for their families and increasing the performance of their plumbing and water-oriented appliances, you’ll be backed by the support of Leaf Home and LeafFilter, the largest gutter protection company in North America. Demonstrate a product that sells itself with pre-set appointments that are provided to you! Our highly successful, multi-channel lead generation platform provides high-converting, and quality pre-set sales appointments. As a 3508 Direct Sales Representative, you can generate your own sales appointment. Best of all most sales close in an hour or less. What’s in it for me? • Prequalified scheduled leads – We provide all the quality leads you to want; you close the sale, • Short sales cycle – Appointments take one hour including paperwork with the install as soon as the same day, • Superior product – Our products are factory direct…there is no comparison!, • Financial Freedom – Earn an average of $75-100k+ in the first year…Our top rep earned $250k in 2024!!, • Weekly Pay – We pay weekly through direct deposit, so no more waiting weeks or months to be paid, • Meet with prospective customers using established sales methodology to educate, consult, inform, and sell!, • Responsible for using established sales methodology to sell customers the proper product that fits their needs, • Develop a rapport and conversation with the customer to facilitate one visit close, • Leverage industry-leading product samples, support, and technology to assist you in closing the sale, • Excellent communication and organizational skills, • Energetic and engaging interpersonal skills with the drive to succeed, • Ability to overcome objections in the sales process, • Travel within the assigned territory based on provided and self-generated leads, • Ability to operate successfully as an independent 3508 direct sales representative Are we your company? Life is full of uncertainties, but whether you provide clean, safe, and sustainable drinking water to your family shouldn’t be one of them. Leaf Home Water Solutions installs solutions that provide the best water for families and their homes. As such, we strive to assemble a team of caring and compassionate individuals that share our mission of empowering homeowners. From our corporate team to our local teams, we have crafted a team of the very finest… and we hope you’ll be joining that team!

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68836 Hiring Manager: Hany Azmy HR Rep: Patricia Oltar SUMMARY The purpose of the Maintenance Planner is to perform as professional, highly skilled and exceptionally competent maintenance person in addition to handling the certification, training and management of contractors and all planned maintenance. This role handles the bid and planning process for project work. Participates in teams to develop and implement solutions. Principal Duties and Responsibilities: • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • Confirm that all contractors have completed the proper safety compliance paperwork before a project begins., • Training and oversee contractors as they come on site to complete projects., • Work with the Reliability Leader and Controller on 901s for project completion., • PLC basics -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Troubleshooting basics, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"., • Process 101 - Basic concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Must have minimum two years of plant experience or have demonstrated capability and knowledge to trouble shoot major plant systems. (Filled coating sys, Slate sys, Poly wrap. Etc.), • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety polices and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • nInspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly, precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and basic bearing "physics"-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Basic welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Basic electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Basic industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Fully competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuningComply with all plant rules, • Comply with safety regulations and maintain a clean and orderly work area, • All other duties as assigned or needed The employee should hold the following abilities: • Basic Computer Skills, • Electrical, • Basic PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone The employee must be able to: The employee should have the following: High School or equivalent Complete and pass Electrical CD Rom training provided by plant. • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines. The employee should possess the ability to: • Able to do repetitive hand, arm, leg movements for several hours, • Able to climb on and off of fork truck, • Ability to stand for 10 - 12 hours straight, • Able to climb and descend stairs for up to 12 hours continuously, • Lift and push and pull 50lbs. More than 100 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Bending and twisting, • Handle, control or feel objects, tools or control This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Title: Adjunct Instructor for ENGR 320 Prototyping Essentials Department: Newark College of Engineering Reports To: The Department Chair Position Type: Faculty Position Summary: The Newark College of Engineering, Office of the Dean seeks applications for an adjunct instructor to teach Prototyping Essentials (ENGR 320) course. ENGR 320 covers a variety of design and prototyping skills and concepts and requires student to demonstrate skills with weekly fabrication projects completed in the NJIT Makerspace. The successful candidate should be familiar with modern prototyping machinery and processes including CO2 laser cutting, fiber laser cutting, standard and CNC woodworking equipment, water jets, thermoforming, 3D printing, Fusion 360 2D and 3D CAD, Fusion 360 CAM, Arduino Programming, basic electronics, measurement tools, and other equipment. Training and qualifications on the operation of specific equipment can be provided by the NJIT Makerspace staff prior to the semester. Essential Functions: • Develop and deliver lectures and labs on prototyping, 2D modeling, 3D modeling, laser cutting, electronic circuit building, microcontrollers, water jets, 3D printing, woodworking, thermoforming, fastening, etc., • Prepare materials for laboratory assignments and conduct laboratory exercise supervision., • Learn and use online course management system - Canvas., • Hold office hours in the NJIT Makerspace and coordinate with instructor running additional sections of ENGR 320 on a regular basis. Prerequisite Qualifications: • Candidates should have at least an M.S. degree in Engineering, Engineering Technology, Industrial Design, or a closely related field., • A minimum of 3 years of experience in teaching university level courses., • At the university's discretion the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university an equivalent combination of education and experience., • Candidates should be prepared to teach on a face-to-face basis. Bargaining Unit: AFT-UCAN Salary Information: In compliance with the NJ Pay Transparency Law, the rate for this position is $2668 per contact hour (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Exempt Part-Time Apply NowShare Save Job

Job Description We are a growing plumbing and drain company in New Jersey, looking for a self motivated individual with PLUMBING SERVICE WORK EXPERIENCE, who's responsible to run one of our company trucks in North New Jersey. The ideal candidate will have a clean valid driver's license, can pass a background check and a drug test. In addition, this candidate would be one who shows up for work everyday he’s scheduled and is on time with a positive attitude. Is very well verse with customer service and is well spoken. Takes care of the company vehicle and has his own tools. Can lift up to 100lbs or more and is in good physical shape. This person will be good at communicating with our customers, and working with management, communicating on jobs and a very good plumbing problem solver. We service Union County, Essex County, Bergen County, Hudson County and Passaic County and parts of Middlesex. Responsibilities: *** Water Heater service repair (Gas & Electric) Diagnose failure of components and replace/ Install new water heater *** Toilet repair/Replacement (Running toilets, Flapper repair Fill valve replacement, or new kit) or install new toilet *** In Home Water Leak Repair (Replace valves on sink lines, bathroom sink lines, toilet lines & locate/repair copper leaks) open walls or ceiling to get access to leak for repair. *** Faucet Repair/Replacement (Repair dripping faucets, or leaking knobs & install new faucets) *** Unclogging Drains (Mainline, Toilets, Sinks, Tubs) Using hand snake/drum machine or eel sectionals, to clear sewer blockages. *** Sewer Inspections ( Perform sewer inspections with camera and be able to spot broken pipes, Tree root intrusions, Bellies/Sags in pipe for customers and also do report for customer onsite) *** Main sewer pipe repair ( Go inside of outside trench and cut out old cast iron or clay pipe and connect new sch 40 pvc) *** Outside Water Service main repair (Well versed in understanding fittings and pipe needed for water service main repair) If you have Hot water boiler/Steam boiler experience repairing and installing also tankless water heater repairing and install, this is pays more, please be sure to include that in your response. Company DescriptionUrgent Drain is a fast growing Plumbing company dedicated to delivering reliable, high-quality service to our customers. As part of our team, you'll work in a professional, supportive environment where your skills are valued, your growth is encouraged, and your hard work is rewarded. At Urgent Drain, we take pride in what we do and are looking for motivated individuals who want to build a long-term career in a company that's committed to excellence.Urgent Drain is a fast growing Plumbing company dedicated to delivering reliable, high-quality service to our customers. As part of our team, you'll work in a professional, supportive environment where your skills are valued, your growth is encouraged, and your hard work is rewarded. At Urgent Drain, we take pride in what we do and are looking for motivated individuals who want to build a long-term career in a company that's committed to excellence.

Are you looking for a company with unlimited compensation opportunity, weekly pay, and advancement to management roles? Leaf Home Water Solutions, a division of Leaf Home is looking to grow our team of Outside Sales Representatives TODAY!.Why Work with Leaf Home Water Solutions?.Working with Leaf Ho

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68488 Hiring Manager: Alex Sim HR Rep: Patricia Oltar ___Summary: The position will work closely with leadership level and employee level team members across the manufacturing site to support a strong proactive safety culture and an effective, efficient, and compliant EH&S process. The position will maintain documentation to support compliance with regulatory standards at the federal, state, and local levels. Principal Duties and Responsibilities: ___General • Comply with all OSHA, Owens Corning, and other workplace regulatory rules., • Proactively lead the Owens Corning Kearny team by example in all aspects of EH&S., • This is an in-person, onsite role in an industrial manufacturing setting., • Availability to work on different shifts once per week to support 24-hour manufacturing operations., • Attend daily production department shift huddles once per week to communicate EHS initiatives., • Investigate workplace safety concerns and submit SAP work request notifications as needed., • Participate in Owens Corning EHS regional calls to understand Roofing & Asphalt Divisional priorities., • Assist in Total Productive Maintenance (TPM) program implementation., • Support facility needs through management of EH&S vendor activities., • Support facility safe operation through EH&S supply purchasing and procurement., • Maintain a clean and orderly work area., • Working knowledge of OSHA General Industry safety program standards, • Maintain and audit Owens Corning ___SIF (Serious Injury or Fatality-potential) program standards:, • Powered Industrial Vehicles, • Lock Tag Try / Hazardous Energy Control, • Machine Guarding, • Working from Heights, • Confined Space Entry, • Electrical Safety, • Hot Work, • Understand and ensure compliance with Owens Corning Lock/Tag/Try system.Become an expert on hazardous energy control using provided documentation. Conduct or facilitate employee lockout training., • Manage Owens Corning Powered Industrial Vehicle program., • Become an Owens Corning forklift trainer., • Apply prescribed hazard analysis methodologies to determine at-risk conditions., • Complete initial investigations and determines root cause of reported injuries / near misses., • Lead and implement HPI (Human Performance Improvement) principles through ongoing safety communication on the floor, specialized projects, Job Hazard Analysis (JHA), and other training., • Lead monthly Safety Committee Meetings., • Work towards certification as an Owens Corning Hazard ID & Control Specialist 2.0, • Lead and maintain Learning Management System (LMS) online safety training program in both Roofing and Asphalt., • Act as a guide and main point of contact for safety training for outside contractors., • Lead, maintain and update safety training package for all Owens Corning new hires., • Lead facility housekeeping in accordance with environmental, safety, and health program requirements., • Lead compliance efforts for all site environmental regulatory programs including, but not limited to:, • Title V. Major Source Facility air permit, • NJPDES discharge water permit, • USEPA SPCC plan, • USEPA FRP plan, • NJDEP DPCC / DCR plans, • EPCRA Section 313 / Community Right to Know, • NJ Safe Drinking Water standard, • Radiation General License, • Assist in maintenance of the Owens Corning facility Environmental Management System (EMS)., • Maintain facility environmental compliance calendar and adhere to all reporting deadlines., • Lead closure of monthly compliance calendar action items for Roofing and Asphalt facilities (physical records verification, inspection confirmations, vendor management, compliance planning), • Update and maintain the Globally Harmonized System (GHS) for hazard communication program., • Manage site Safety Data Sheet (SDS) inventory onsite and electronically., • Communicate effectively with environmental consultants to support facility programs., • Assist in scheduling of workplace biannual industrial hygiene surveys., • Identify and mitigate health concerns in the workplace., • Understand and mitigate exposure to workplace gas and chemical hazards, including the oversight of safe confined space entry procedures; use and calibration of facility multi-gas meters., • Ability to work well in a group or alone., • Ability to manage own time and assignments on a priority basis., • Strong organizational skillset and attention to detail., • Able to communicate effectively in English, both verbally and written., • Able to maintain extensive professional relationships., • Ability to communicate effectively across all levels of the organization: regional management, facility management, facility supervision, union representatives, and floor employees., • Maintain acceptable work attendance record in accordance with company policies., • Strong team mentality., • Must demonstrate strong computer literacy skills., • Demonstrate strong working knowledge of Microsoft Office suite (Word, Excel, Powerpoint)., • Experience with industry-specific software preferred (SAP, AspenTech, Cority, Actio, Dakota)., • College degree required., • Leadership training, experience leading and facilitating groups., • Experience working in an industrial / operational environment preferred., • Experience working within regulatory systems required., • Forklift trainer experience preferred., • Experience managing workplace training programs preferred., • Owens Corning Hazard Recognition & Control Specialist preferred., • Able to climb and descend stairs., • Lift, push and pull up to 50 lbs., • Handle and control objects, tools, and devices., • Able to climb tank stairways to read gauges once per month (2-3 stories)., • Able to conduct repetitive hand, arm, leg movements., • Able to conduct bending and twisting movements., • Must be able to squat and bend at the waist and knees freely., • Exposure to hot and cold temperature extremes., • Exposure to elevated sound or noise levels requiring use of hearing protection. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Since 1952, Kiely Family of Companies has been building lasting relationships and delivering innovative design-build solutions that put our customers success first. Founded by John F. Kiely Sr., we have grown into a diversified group of companies whose unique capabilities enhance one another, making us greater than the sum of our parts. Recognized on the ENR 400, 500, and 600 lists for engineering and construction excellence, KIELY is a leading design-build, construction, and engineering services provider specializing in infrastructure solutions for the natural gas, water and wastewater, electric, industrial, commercial, and midstream pipeline industries. Our integrated engineering and construction teams deliver turnkey solutions from initial design and permitting through construction, commissioning, and ongoing support helping customers build, maintain, and modernize critical infrastructure. Our culture is built on teamwork, technological innovation, and the highest ethical standards. We refer to our employees as team members because together we empower, partner, and advanceserving a purpose far greater than any individual project. Kiely team members are an elite group of behind-the-scenes professionals who embody our core values and are dedicated to making a meaningful impact. Position Summary: We are seeking a creative and strategic Manager, Digital Content & Marketing to lead the development of visual expression of our brand during a period of growth and integration. As a multi-generation, family-led construction and infrastructure company, we are actively unifying dozens of acquired operating companies across electric, gas, water, and construction under a single, cohesive brand system. This role is responsible for developing and maintaining a consistent brand identity across digital, print, and physical platforms. The ideal candidate is a strategic, hands-on creative leader who combines strong design expertise with project management skills. This individual will create compelling content, establish brand standards, collaborate with internal stakeholders, and manage external vendors to ensure all marketing efforts align with business objectives and deliver a high-quality, unified brand experience. Responsibilities: • Translate brand strategy into scalable, cohesive design systems that support growth and acquisitions, • Align creative direction with business objectives, simplifying complex information into clear, engaging visual content, • Design, produce, and oversee a wide range of assets, including marketing collateral, digital and print campaigns, fleet graphics, signage, and internal communications, • Partner with executives, marketing teams, and cross-functional stakeholders to develop and execute content that drives business goals, • Establish and maintain workflows, templates, and brand standards to ensure consistency and efficiency, • Manage relationships with external vendors (photographers, videographers, creative agencies), ensuring deliverables meet brand and marketing expectations, • Monitor industry trends in digital marketing and design, recommending innovative improvements, • Lead creative brainstorming sessions and contribute to campaign and content strategy development, • Bachelors degree in Graphic Design, Marketing, Communications, or a related field, • 6+ years of experience in branding, design, content creation, and creative leadership, • Proven experience designing for real-world applications, including vehicles, signage, print materials, and physical environments, • Ability to clearly communicate design rationale and trade-offs to non-creative stakeholders, • Experience working in complex, multi-stakeholder organizations, • Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign, Premiere Pro) and related design/video tools, • Strong understanding of branding, typography, layout, and visual storytelling, • Excellent communication, organizational, and project management skills Position offers competitive pay, benefits, paid vacation, and health/dental insurance. Full-time: $90,000-$105,000 a year, based on experience and qualifications. Equal Opportunity Employer, M/F/D/V Kiely Family of Companies is a growing and dynamic company actively seeking applications and resumes from exceptional candidates. Whether you come equipped with years of experience in the underground utility fieldor youre ready to work hard and get therewe want to hear from you PI6a286b60ccff-26289-38625569

Direct all aspects of public works operations, including roads, sanitation, water and sewer systems, fleet, and facilities. Bachelor’s degree and 6+ years of relevant experience, including at least 4 years in management; or. Master’s degree and 5+ years of relevant experience, including at least

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription: Handyman Introduction Established in 1918, Guardian Service Industries is a 4th generation family-owned Janitorial, Security, Pest Control, and Engineering & Operations staffing corporation. We provide a comprehensive range of essential facility management services to over 1,000 clients across various sectors, inclusive of commercial and government buildings, residential communities, schools, industrial facilities, transportation hubs, and retail outlets throughout the East Coast and New England. The Role: Most/all of the following service tasks are to be completed daily depending on your role. Schedule: Multiple positions open Shift: Multiple positions open Pay rate: $22.00 /hr Responsibilities & Skills: • Repair systems such as HVAC, heating, refrigeration, water, and energy as necessary, • Repair bathroom fixtures such as sinks, bathtubs and toilet as necessary, • Maintain and/or replace integral fixtures such as door hardware, compactors, and trash chutes., • Maintain quality of paint in equipment rooms as well as other building facilities, • Perform general electrical work as necessary, • Perform general carpentry work as necessary, • Perform general maintenance and cleaning in mechanical spaces and perimeter inductions units, • Inspect fire safety systems for any potential issues to functioning, • Maintain and repair sanitary sewer systems such as sump pumps, basins, water closets, urinals and piping, • Maintain and repair all kitchen equipment, excluding any equipment owned by tenants, • Remain available in the instance that the superintendent of the building is unavailable Basic knowledge of HVAC Electrical Painting Plumbing Plus if have at least 1 year of experience working in high-rise buildings. The position may consist of continual lifting and moving of equipment and furniture The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with a disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Our company participates in E-Verify to confirm employment eligibility. Requirements:

Job Description Technical Sales & Customer Service • Act as the primary technical expert on the counter for plumbing, heating, HVAC, and boiler systems, • Assist customers and tradespeople in identifying parts, diagnosing issues, and selecting the correct products for their applications, • Take orders over the counter, answer product questions, and manage customer payments, • Provide prompt, helpful, and professional service to every customer Troubleshooting • Diagnose and troubleshoot plumbing, heating, HVAC, and boiler problems brought in by contractors and homeowners, • Interpret fault codes, error messages, and system symptoms across a variety of manufacturers, • Guide customers clearly and patiently through troubleshooting steps, including non-professionals, • Apply safety knowledge and know when to refer work to a licensed professional Leadership & Team Development • Mentor and support junior counter sales associates in developing product knowledge and customer service skills, • Stay current on new products, manufacturer updates, and industry codes; share knowledge with the team, • Collaborate with the General Manager on inventory needs and customer product feedback, • Assist with receiving and organizing inventory as needed Requirements Qualifications • 5+ years of experience in plumbing, heating, HVAC, or a related trade (field or counter experience accepted), • Demonstrated knowledge of plumbing systems, fittings, fixtures, valves, and pipe materials (copper, PVC, PEX, CPVC, cast iron), • Comprehensive knowledge of hot water and steam boiler systems, components, and controls, • Working knowledge of HVAC systems including forced air furnaces, central A/C, heat pumps, and mini-split systems, • Proven troubleshooting skills across plumbing, heating, HVAC, and boiler systems, • Strong communication skills; ability to explain technical concepts clearly to any audience, • Reliable, dependable, and team-oriented with a strong work ethic, • Comfortable using point-of-sale and inventory management software, • Must be able to keep up with a fast-paced workload Preferred • Prior counter sales or wholesale distribution experience, • Leadership or mentoring experience, • Trade license or certification (plumbing, HVAC, or related), • Familiarity with hydronic heating systems including radiant floor and baseboard applications Work Environment & Physical Requirements • On-site position at our East Orange, NJ store location, • Fast-paced retail and wholesale environment with a community feel, • Frequent standing, walking, and customer interaction throughout the shift, • Ability to lift and carry up to 50 pounds occasionally, • Overtime required; schedule may vary based on business needs Benefits • Competitive salary of $28–$38/hour based on experience, • Robust health benefits, • Vision insurance, • Dental insurance, • Paid vacation and sick time, • 401k program, • Growth and leadership opportunities, • Training available, • Company SWAG!, • Annual holiday party, • Free snacks available for employees!