Trabajos Construction & Trades en NelsonCrear alertas

An opportunity for a Trainee Aluminium Production Welder within a well-established fabrication and Sheetmetal company in Nelson, Lancashire. Have some previous experience working in a Production environment, someone looking for a new skill. Ability to work to a production pace within a factory setti

My client is looking for a Mechanic/ Mechanical Fitter with experience repairing/ servicing compressors/generators/pumps Would suit a skilled Mechanic or Mechanical Fitter with the above experience. This is a Temp to Perm position leading to Full-time employment. Must be reliable £15-£16 pr/hr Hours Mon-Fri 7.30am-4pm...

Skilled Welder £35,200 Burnley Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Skilled Welder to work at their facility based near Burnley Performance Objectives • Participate in a positive and proactive EHS culture across the site., • Experience in fitting small diameter tubes for Orbital welding to precise tolerances., • Trade qualified with a recognised apprenticeship (City and Guilds etc.), • Undertake TIG welding (manual, automatic and Orbital) to aircraft standards to fall in line with welding controls and processes., • Read and interpret Engineering drawings., • Read, interpret and follow batch cards ensuring that batch card discipline is adhered to at all times., • General maintenance of machinery, jigs and fixtures is required to ensure a clean and healthy working environment., • Working alongside the Operational team, reduce welding non-conformances and work to best practices., • Assist with corrective actions and assist with route cause analysis to prevent issues from re-occurring., • Good knowledge of fusion welding, with at least five years' experience working in the Aviation sector., • ...

Sheet Metal Welder/Fabricators Established Respected Company Competitive Rates of Pay 4 day working week Salary reviewed annually Excellent working environment Overtime available Our client based in Nelson is looking for Sheet Metal Welder Fabricator on a permanent basis, the client is a world-renowned manufacturer machinery and food equipment and are looking for time served candidates with MIG/TIG welding experience. Due to the nature of the work suitable candidate must have the ability to work on site in the UK and abroad as and when required, accommodation and transport will be included. Skills and Experience Operate machinery used in the production process Follow, create and maintain Welding Procedure Specifications Read and understand shop drawings Assemble items as instructions for Foreman

Sheet Metal Welder/Fabricators * Established Respected Company * Competitive Rates of Pay * 4 day working week * Salary reviewed annually * Excellent working environment * Overtime available Our client based in Nelson is looking for Sheet Metal Welder Fabricator on a permanent basis, the client is a world-renowned manufacturer machinery and food equipment and are looking for time served candidates with MIG/TIG welding experience. Due to the nature of the work suitable candidate must have the ability to work on site in the UK and abroad as and when required, accommodation and transport will be included. Skills and Experience * Operate machinery used in the production process * Follow, create and maintain Welding Procedure Specifications * Read and understand shop drawings * Assemble items as instructions for Foreman * MIG and TIG weld steel, aluminium components based on the specifications provided * Perform final assembly to produce high quality finished products Personal Attributes * NVQ3/City and Guilds qualification in Welding and Fabrication or timeserved * MIG/TIG Experience * Ability to use CNC Equipment * Will be able and be prepared to work in locations both overseas and within the UK. If you are an experienced Welder Fabricator and commutable to Nelson, please send your CV to James at The Recruitment Fix Ltd for more information...

Welder / Fabricator | Nelson | £36,800 Want to weld something with a bit more purpose than railings and brackets? This is hands-on fabrication for engineers who enjoy building proper kit from scratch – not production line monotony.If you can MIG and TIG to a decent standard and want a

Summary of role You will be supporting other more senior members of the commercial team in delivering the varied commercial duties for our Rolls Royce projects, as well as being responsible for procuring and managing our supply chain. You will actively seek to minimise the costs of a project and enhance value for money, while still achieving the required standards and quality for our client. What you will be doing • Measure, record & value work unsupervised in accordance with appropriate rules and procedures, • Work with PM and single source contractor over value engineering reductions, • Measure & interpret specifications & drawings, • Build up estimates from first principle including net and gross estimates, • Translate measurement from drawings and Specifications and prepare Bills of Quantities and/or Schedules of rates, • Provide input and commercial adjudication to potential tenders (Go/No-go, etc), • Review weekly, monthly, programmes of works, • Plan commercial activities to meet requirements of programmes, • Have an understanding of delay and disruption programmes, • Use the companys Evolution MX System, • Prepares, submits and negotiates claims when required. Including monthly valuations and final account, • Collation of Cost and Value Information for monthly reviews

Estimator Location: Nelson | Salary: £30,000–£40,000 + Commission | Type: Full-time Our client is looking for a commercially driven Estimator to join their growing team. This hybrid role combines preparing accurate project quotations with actively developing new business opportunities. Key Responsibilities: Produce detailed estimates for industrial projects Interpret drawings, specs, and carry out site surveys when needed Build relationships with clients, contractors, and suppliers Identify and win new business across commercial and industrial sectors Manage enquiries, prepare proposals, and convert leads into orders About You: Experience in estimating or sales within construction/industrial sectors Strong technical understanding and ability to read drawings Excellent communication and negotiation skills Highly organised, target-driven, and commercially aware Full UK driving licence required What’s on Offer: £30k–£40k basic + commission Company vehicle Pension scheme & on-site parking Apply now to join a dynamic business where you can make a real impact. INDLIV...

An exciting opportunity has arisen for a Sales Estimator / Planner to join a busy and well-established team.

Mechanical Design Engineer Burnley £36,000 - £43,000 (dependent on experience) Are you looking to accelerate your engineering career with a growing engineering company? This is an excellent opportunity for a Mechanical Design Engineer to join a machinery manufacturer delivering large projects across the UK and internationally. This is an exciting, innovative role within a business that is entering a significant growth phase. You will be joining a forward-thinking engineering team and working in a hands-on Mechanical Design Engineer position, designing machinery using SolidWorks and taking projects from concept through to build. Why join? • Brand-new purpose-built facility with modern offices and cutting-edge equipment, • Exposure to major engineering projects across multiple international locations, • Clear career development pathways from trainee through to lead and management roles, • Ongoing learning and training opportunities including courses and qualifications, • Growing organisation with a strong pipeline of long-term engineering projects Responsibilities of the Mechanical Design Engineer: • Research and concept development through to detailed design, • Taking existing designs and adapting them into new machine formats, • Modifying and improving existing equipment and machinery, • Supporting the build and development of prototypes, • Designing fabricated components and assemblies in mild steel, • Working with hydraulics, pneumatics, and electrical components, • Producing detailed drawings and documentation for manufacture Requirements of the Mechanical Design Engineer: • Engineering qualification HNC, HND, or Degree in Mechanical Engineering or similar, • Over 3 years’ experience as a Mechanical Design Engineer, • Background within heavy engineering or fabrication environments, • Strong equipment and machinery design experience, • Proficient in SolidWorks and AutoCAD, Inventor also considered, • Good understanding of hydraulics and pneumatics, • Awareness of electrical components and interfaces Benefits of the Mechanical Design Engineer: • Bupa Private Healthcare, • Excellent pension scheme with 4% employee and 7% company contribution, • Electric Car Scheme, • Mental Health Support, • First Aid Support & Training, • 25 Days Holiday + 8 Bank Holidays If you are a Mechanical Design Engineer looking for a technically challenging role within a growing engineering business, please get in touch: Please contact Adele Lewis or click Apply Now. Call: 0151 209 2050 or 07537 163 611 Email:

Maintenance Engineer - Days | Mon- Thursday only 7am to 5.30 monday to thursday with Friday off! £38,000 plus benefits We are currently working with a growing FMCG client to recruit a skilled Maintenance Engineer for their Nelson site. This is a full-time, days-based role (Monday to Thursday), offering a great work-life balance. In this role, you will be responsible for maintaining production equipment, minimising downtime, and supporting operational output through a mix of planned maintenance, reactive repairs, and continuous improvement, working on planned maintenance and breakdowns on food machinery, such as flow wrappers, mixers, coolers etc. Key Responsibilities * Carry out planned preventive maintenance (PPM) across all production equipment * Diagnose faults on mechanical machinery. Working closely with the Maintenance Manager on this busy site. Ideal candidates will have some experience working on machinery. The client is also willing to train candidates as well. If you're a reliable and motivated engineer looking to join a business that is happy to train you, and also earn a generous salary. Please apply now for immediate interview. Occasional Overtime is offered on Fridays, but no call outs, nights or weekends...

Welder Fabricator Burnley Monday night to Friday morning 5pm-3.30am Welder Fabricator The Role You will be responsible for the welding & fabrication of sheet metal sub-assemblies, frameworks and pipework. Welder Fabricator Main Responsibilities Welding & fabrication (TIG & MIG) of sheet metal sub-assemblies, frameworks and pipework. Reading & interpreting technical engineering drawings / specifications. Inspecting & measuring finished products, ensuring they are in line with specifications / quality standards. Identifying & reporting any defects. Working to project deadlines. Welder Fabricator The Candidate Apprentice Trained or Time Served with City & Guilds qualification. Experience with TIG & MIG. Must be able to read and interpret engineering drawings. Must be able to inspect to specifications. Experience of fabrication in stainless steel or mild steel. Welder Fabricator Benefits Overtime: Friday 1.5x, Saturday 1.5x, Sunday 2x 264 hours holiday per year (including bank holidays) Contributory pension scheme Discretionary annual bonus Life assurance Medical cash health plan Employee assistance program INDAB AMRT1_UKTJ ...

• Sheet Metal Workers / Fitters, • £33,000 - £40,000 plus overtime!, • 10% Employer Pension Contribution, • 27 days holiday (+ Bank Holidays!!), • Early finish Friday! My client specializes in the manufacturing of complex fabrication and precision machined components, including gas turbine engines. They serve customers around the world in commercial and military aviation, power generation, the marine industry, rotary wing, and unmanned aerial vehicles. Due to a significant increase in orders, they need to recruit several Sheet Metal Workers / Fitters. THE JOB The Sheet Metal Workers / Fitters will be responsible for fitting, maintaining, and repairing aircraft engine components. Working hands-on, efficiently and to high quality standards, you will be working alongside and supporting other key business areas across the site. The Sheet Metal Workers / Fitters essential duties and responsibilities u...

Inspector Burnley 2 Weeks Days - 2 Weeks Twilight Rotation £36,000 My client is a leading UK-based manufacturer specialising in the design and production of high-quality valves and fittings for the global tank container industry. With a strong reputation for engineering excellence, safety, and innovation, the company serves customers worldwide across a range of industrial sectors. The Role You will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team, and you are expected to contribute to improving any working processes. Responsibilities: First off and Patrol Inspection. First article inspection reports. Final view inspection of completed assemblies prior to despatch. Manually handle weights up to 25kg. Use computer equipment for data purposes. To record and maintain inspection and test records. Support the QA team and assist with internal audits. Liaise with Production Managers and Quality on corrective and preventive action. Contribute to a team working environment. Contribute to continuous improvement. Maintain safe and clean working environment by complying with procedures, rules and regulations. Observe and practice the 5S principles. The role also includes other general duties to maintain the efficient working of the Inspection Department. Th...

Skilled Welder £35,200 Burnley Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Skilled Welder to work at their facility based near Burnley Performance Objectives Participate in a positive and proactive EHS culture across the site. Experience in fitting small diameter tubes for Orbital welding to precise tolerances. Trade qualified with a recognised apprenticeship (City and Guilds etc.) Undertake TIG welding (manual, automatic and Orbital) to aircraft standards to fall in line with welding controls and processes. Read and interpret Engineering drawings. Read, interpret and follow batch cards ensuring that batch card discipline is adhered to at all times. General maintenance of machinery, jigs and fixtures is required to ensure a clean and healthy working environment. Working alongside the Operational team, reduce welding non-conformances and work to best practices. Assist with corrective actions and assist with route cause analysis to prevent issues from re-occurring. Support business improvement initiatives.Person Specification Good knowledge of fusion welding, with at least five years' experience working in the Aviation sector. Experience of working with a variety of materials including exotic metals such as Nickel and Titanium based alloys. Ability to work within in Team environment. Ability to work on own initiative or as part of a w...

Due to continued business growth, we are looking to recruit an number of experienced Design Engineers to join a leading global business in the Burnley area The role will involve design and development of capital equipment used in the packaging industry. This is a full time permanent opportunity with an industry leader in their field. Candidates will ideally be qualified to a minimum HND if not degree level in a relevant Mechanical engineering discipline with a demonstrable background in design and development of mechanical products. Experience with Autocad 2D and Solidworks are a must for this Experience in design using Sheet metal would be advantageous Hours 5 days on site flexible start/finish times available Key Responsibilities • Produce complete detail drawings of components from new designs and/or from previous customer repeat/duplicate designs. Complete AutoCAD / SolidWorks detail drawings under direction of Senior Engineers., • Construct full (BOM)s Bills of Material on drawings and electronically via engineering software., • Develop detailed design drawings and specifications for mechanical equipment, using computer-assisted drafting (CAD) equipment., • Lay out and draw schematic, orthographic, or angle views to depict functional relationships of com...

Aerospace Fitters * £32,600 - £39,000 plus overtime! * 10% Employer Pension Contribution * 27 days holiday (+ Bank Holidays!!) * Early finish Friday! * Lancashire THE COMPANY My client specializes in the manufacturing of complex fabrication and precision machined components, including gas turbine engines. They serve customers around the world in commercial and military aviation, power generation, the marine industry, rotary wing, and unmanned aerial vehicles. Due to a significant increase in orders, they need to recruit several Aerospace Fitters. THE JOB The Aerospace Fitters will be responsible for fitting, maintaining, and repairing aircraft engine components. Working hands-on, efficiently and to high quality standards, you will be working alongside and supporting other key business areas across the site. The Aerospace Fitters essential duties and responsibilities under direct supervision will include: Key Accountabilities and Responsibilities * Participate in a positive and proactive EHS culture across the site. * Manually fit parts to required customer standards and aircraft standards, including inspection of braze joints. * Ability to understand, interpret and work to Engineering drawings and to work to tight tolerances. * Checking of components to verify conformity, using tooling and other measuring devices. * Ability to use measuring equipment and inspection fixtu...

Sheet Metal Workers / Welders * £33,550 - £39,000 per annum * 10% Employer Pension Contribution * 27 days holiday (+ Bank Holidays!!) * Day’s role! * Lancashire Are you an experienced Sheet Metal Worker / Welder with experience in manufacturing or engineering? Are you seeking a new role that matches your career development and aspirations? Well, read on!! My client has secured several major aerospace projects and have an orderbook bursting at the seams!! They are urgently looking to recruit welders within their engineering department. (This is days roles are 07:30 – 16:00, Monday to Friday). Role Profile As an experienced Sheet Metal Worker / Welder, this is a hands-on position responsible for the welding of aviation components. Working to tight tolerances, this position will primarily work on productionised components but should also have the flexibility to work on new product introduction. Key Accountabilities and Responsibilities As an experienced Sheet Metal Worker / Welder, you will have: * Experience in fitting small diameter tubes for Orbital welding to precise tolerances. * Trade qualified with a recognised apprenticeship (City and Guilds etc.) * Undertake TIG welding (manual, automatic and Orbital) to aircraft standards to fall in line with welding controls and processes. * Read and interpret Engineering drawings. * Read, interpret and follow batch cards ensuring that batch card dis...

Are you an Inspector looking for your next permanent job in Burnley? Have you got experience using inspection equipment - micrometers, verniers etc? Do you have the qualifications to back up your experience? Happy working days and twilight shifts Monday to Friday only? Would a salary of just over £36000 be OK for you? Is your experience inspecting milling, turning and welding disciplines? If you have answered "yes" to all the above questions then this role maybe perfect for you, please read on and apply if interested. Suitable candidates will be called and given additional information on the position and company. Duties of this position will include; *First off and Patrol Inspection. *First article inspection reports. *Final view inspection of completed assemblies prior to despatch. *Manually handle weights up to 25kg. *Use computer equipment for data purposes. *To record and maintain inspection and test records. *Support the QA team and assist with internal audits. *Liaise with Production Managers and Quality on corrective and preventive action. *Contribute in a team working environment. *Contribute to continuous improvement. *Maintain safe and clean working environment by complying with procedures, rules and regulations. *Observe and practice the 5S principles. Ideal candidates will be time served or have equivalent qualifications, you must have experience using inspection tooling, ...

Welder Fabricator Hapton? Mon-Thurs 6.30am-5pm Welder Fabricator The Role You will be responsible for the welding & fabrication of sheet metal sub-assemblies, frameworks and pipework. Welder Fabricator Main Responsibilities Welding & fabrication (TIG & MIG) of sheet metal sub-assemblies, frameworks and pipework. Reading & interpreting technical engineering drawings / specifications. Inspecting & measuring finished products, ensuring they are in line with specifications / quality standards. Identifying & reporting any defects. Working to project deadlines. Welder Fabricator The Candidate Apprentice Trained or Time Served with City & Guilds qualification. Experience with TIG & MIG. Must be able to read and interpret engineering drawings. Must be able to inspect to specifications. Experience of fabrication in stainless steel or mild steel. Welder Fabricator Benefits Overtime: Friday 1.5x, Saturday 1.5x, Sunday 2x 264 hours holiday per year (including bank holidays) Contributory pension scheme Discretionary annual bonus Life assurance Medical cash health plan Employee assistance program INDAB AMRT1_UKTJ ...

Job Description Welders / Sheet Metal Workers £36,275 - £40,000 per annum 10% Employer Pension Contribution 27 days holiday (+ Bank Holidays!!) Days role! Lancashire Are you an experienced welder with experience in manufacturing or engineering? Are you seeking a new role that matches your career development and aspirations? Well, read on!! My client has secured several major aerospace projects and have an orderbook bur... ZIPC1_UKTJ

I'm supporting a fast growing engineering and manufacturing organisation that delivers complex, high value projects across aerospace, defence, marine, automotive, and other advanced sectors. As part of this growth, they are looking for an experienced Estimating Engineer to join their Sales & Estimating team in their Burnley based manufacturing xrnqpay facility. The Role: Key Responsibilities Do you have the skills to fill this role Read the complete details below, and make your application today. Estimating & T...

Summary of role You will be supporting other more senior members of the commercial team in delivering the varied commercial duties for our Rolls Royce projects, as well as being responsible for procuring and managing our supply chain. You will actively seek to minimise the costs of a project and enhance value for money, while still achieving the required standards and quality for our client. What you will be doing Measure, record & value work unsupervised in accordance with appropriate rules and procedures Work with PM and single source contractor over value engineering reductions Measure & interpret specifications & drawings Build up estimates from first principle including net and gross estimates Translate measurement from drawings and Specifications and prepare Bills of Quantities and/or Schedules of rates Provide input and commercial adjudication to potential tenders (Go/No-go, etc) Review weekly, monthly, programmes of works Plan commercial activities to meet requirements of programmes Have an understanding of delay and disruption programmes Use the companys Evolution MX System Prepares, submits and negotiates claims when required. Including monthly valuations and final account Collation of Cost and Value Information for monthly reviews Experienced in NEC3/4 - Issue and management of Early Warning Notices / EWN Register, Risk Register, Compensation Events and alike Monitors subcontract activities, measure and respond appropriately with applicable notices Preparation of Cost reconciliation statements Help identify savings and value engineering Collect information required to specify procurement requirements Record and document information including registration of interest Undertakes customer and stakeholder management for their area of responsibility Vetting of contractual terms and conditions in accordance with Integral house rules Cash management: Commercial processes involved with debt recovery, retentions and cash flow Measurement of works and agreements with subcontractors, including placement of sub-contract orders (T&Cs), valuing applications, measurement of variations and final account agreement What we will need from you BSc or MSc in Quantity Surveying or experience equivalent Proven and demonstrable experience in the role of a Quantity Surveyor within the building/construction/building service industries (essential). Experience of working in occupied buildings/campuses (essential). Experience in the use of NEC3 Contracts (highly desirable) Competent user of IT software packages including MS Office, Excellent interpersonal skills, with clear and confident written and verbal communication skills (essential). High level organisational ability along with time management skills in order to drive and meet deadlines (essential). Self-motivated with a proactive approach to all tasks undertaken. Able to demonstrate initiative and problem solve (essential). Commitment to providing a high-quality service demonstrating reliability, conscientiousness and flexibility (essential). Benefits Package £Comprehensive & negotiable + company benefits. Additional Information Project Services is a wholly owned subsidiary of JLL, global real estate services firm that provides comprehensive, integrated property related expertise, including management, transaction and advisory services, to investors and occupiers locally, regionally and globally. Project Services delivers design & build solutions using a network of partner trade package subcontractors and suppliers. Through strong growth and outstanding regional client service, the Project Services business has become JLL UK & I leaders of design & build services provider. TPBN1_UKTJ

Job Description About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to th... ZIPC1_UKTJ

Our Client in the Padiham area are looking for a Skilled Fabricator Working on Vehicle Bodywork and Trailers Skilled working with Sheetmetal Skilled Mig welder Using machinery such as Folders/Benders/Guillotine/ Punch Working from Engineering Drawings Use of all Hand Tools/ Drills/Grinders etc Type: Permanent...

Electrical Fitter Burnley Mon-Thurs 6.30am-5pm Electrical Fitter Main Responsibilities Assemble electrical systems or prototypes, using hand tools or measuring instruments. Build, calibrate, maintain, troubleshoot, or repair electrical instruments or testing equipment. Inspect electrical project work for quality control and assurance. Identify solutions to on-site technical design problems involving electrical systems equipment. Collaborate with electrical engineers or other personnel to identify, define, or solve developmental problems. Set up or operate test equipment to evaluate performance of parts, assemblies, or systems under simulated operating conditions. Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material. Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations. Prepare, review, or coordinate ongoing modifications to contract specifications or plans. Build or test electrical components of systems. Electrical Fitter The Candidate Must have 18th edition wiring regulations Must have qualifications in electrical / electronic engineering. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and p...

Our client in Haslingden, Rossendale is looking to recruit a Furniture Upholsterer for a temp to perm role out of their manufacturing and distribution site To be considered for an interview, please make sure your application is full in line with the job specs as found below. The role will involve: Upholstering various items including seat boards, stools, sofas and tub chairs Using materials including foam, fabric, faux leather and real leather Checking xcunqrw work orders to determine amount of material needed Following drawing...

HR Advisor - Labour Relations Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Warton, Preston £41.58 per hour via PAYE or £53.55 via umbrella (Inside IR35) Contract Overview We are seeking an experienced HR Advisor - Labour Relations to join the team at BAE Systems, based in Warton, Preston. This is a fantastic opportunity to work within a highly xcunqrw regulated, unionised environment, supporting key labour relations activities across a co...

Welder / Fabricator | Nelson | £36,800 Want to weld something with a bit more purpose than railings and brackets? This is hands-on fabrication for engineers who enjoy building proper kit from scratch not production line monotony.

A recruitment agency is seeking an experienced Quantity Surveyor for a permanent role in Lancashire.The successful candidate will manage contract implementation and ensure compliance for engineering projects, requiring a relevant degree or equivalent experience.The role also includes coaching team m

A recruitment agency seeks experienced Sheet Metal Workers/Welders in Hapton, England, to join a growing aerospace engineering team.

A leading packaging company in Burnley is seeking a Maintenance Engineer (Electrical) to maintain and repair mechanical and electrical machinery.

Principal Fire Risk Assessor/ Fire Safety Strategy Consultant Relocate to or be based in North West England c. £75k - if you are Level 4 or 5 Principle Risk assessor/ Fire Strategy Consultant - £70k - £80k pa + Car/A + Bonus + Excellent benefits Be Based in (Relocate to) - Lake District / Lancashire/ Cumbria/ Manchester/ West Yorkshire North West England Fire safety consultancy is looking for a Principal Fire Risk Assessor / Consultant Fire Safety Fire Risk Assessor (with Level 4 or 5) Fire Risk Assessment/ Fire Strategy experience. You would be experienced with Fire Exit/ Egress strategies and complex or staged Fire Risk Safety planning on Residential, Commercial, large strategies and advising clients whilst mentoring junior assessors when able. If you want a role where quality beats volume, your judgement is respected, and you can genuinely influence as company grows - this is a senior role with clear route to Head of Consultancy. ROLE - Principle Fire Risk Assessor/ Principal Fire Assessor/ Fire Risk Consultant or Senior Fire Safety Consultant You'll handle complex and higher risk assessments, produce defensible evidence based reports, play a key role in mentoring junior assessors. This role offers a market leading salary, senior leadership position, and the chance to live and work in one of the most beautiful parts of the UK. All the upside and teamwork for experience Assessor, without starting own consultancy, as you will take over from the Owner in Principle role. WHAT YOU'LL HAVE - Principle Fire Assessor/ Principal Fire Risk Assessor/ Fire Consultant/ or Fire Safety consultant - Strong experience delivering fire risk assessments independently - Level 4 or 5 qualification (or equivalent competence) - Complex buildings FRA's (Residential/ Commercial) and defending your assessments BENEFITS - For Senior Risk Assessor, Principal Fire risk assessor/ Fire risk consultant - £70,000 to £80,000 pa - Company car/ Allowance - Quarterly bonus You'll have Time for CPD, and to do complex and strategic fire assessments. Hybrid flexibility to Live and work in North West of England (Cumbria, Lancashire, etc) - Clear progression to Head of Consultancy - Permanent Benefits Drop me a message for a confidential chat if you're a Level 4 or 5 Consultant Risk Assessor, chartered Fire Engineer or Principal Fire Risk Assessor who wants a team and opportunity do see website, apply or call. Steve Eley - Fire and Security Careers (Part of Eley Solutions) - Recruitment Consultancy TPBN1_UKTJ

Role Purpose Responsible for the safe execution of a portfolio of concurrent projects for various Rolls -Royce sites. As part of the role the Project Manager must ensure that the projects are delivered to meet Integral & Rolls Royces standards regarding health, safety, quality, cost and programme, whilst complying as a Principal Contractor with current CDM legislation. This includes compliance with MS18 and CSO6 Rolls Royce standards. Project Managers must be qualified in a related trade, civils/groundworks/building structuresetc. Duties & Responsibilities Responsible for the Pre-Construction phasesof projects with potential values between £50k to £15m, across various Rolls Royce site in Barnoldswick. Provide Health and safety leadership to your site delivery teams and promote behavioural safety improvements. Support the project risk management process and ensure effective controls are established to ensure the safe and timely delivery of the projects. Manage the pre-construction phase ofprojects in accordance with the requirements of the NEC3 Framework Contract Support project opportunities where identified, to realise, maintain and improve the commercial project performance. Play an active lead in the production and risk management of quotations and estimates. Promote and maintain effective client/stakeholder relationships to protect and enhance the company's reputation at project level. To ensure our suppliers, sub-contractors and direct workforce follow company policies and procedures including Health & Safety, Quality Assurance and Engineering standards. Work closely with the Senior Design Manager to ensure robust, workable economic and constructable designs are produced. Liaise with the Rolls Royce Project Managers and their appointed consultant Project Managers to ensure that the projects are managed in compliance with MS18, CS06 and the current delivery programme and cost plan. To ensure a high level of service is delivered and develop relationships with key stakeholders. Ensure projects are delivered to the agreed contract programme. To ensure works are carried out to high standard complying with relevant British Standards, codes of practice and Rolls Royce Standards. Provide knowledge and support if required to ensure the quality and performance of the works. Provide coaching, mentoring and development support to direct reports and trainees Skills & Experience Clear and confident written and verbal communication skills Knowledge and skills to effectively problem solve. Experience in the use of the NEC3 Contract High level of self-motivation, organisational ability and drive to meet deadlines. Experience in the preparation of quotations and estimates. SMSTS City & Guilds /NVQ construction related qualifications. CSCS Card First Aid Sound level of administration and organisational skills Practical experience within the building/construction/building services industries Experience of the management of Health and Safety across multiple sites Experience of working in occupied buildings/campuses Sound knowledge of computer software packages within Microsoft Office Experience in the use of Fieldview or similar tablet-based quality assurance software. Ability to develop a good understanding of the customers business requirements. Initiative Proactive approach to all tasks undertaken. High standard of workmanship Conscientious Team player Reliability Commitment to providing a high-quality of service and willing to work flexibly. Overtime when required About us Project Services is a wholly owned subsidiary of JLL, global real estate services firm that provides comprehensive, integrated property related expertise, including management, transaction and advisory services, to investors and occupiers locally, regionally and globally. Project Services delivers design & build solutions using a network of partner trade package subcontractors and suppliers. Through strong growth and outstanding regional client service, the Project Services business has become JLL UK & I leaders of design & build services provider. At JLL, you'll have a chance to innovate with the world's leading businesses, put that expertise into action on landmark projects, and work on game-changing workplace and facilities management initiatives. You'll also make long-lasting professional connections through sharing different perspectives, and you'll be inspired by the best. We're focused on opportunity and want to help you make the most of yours. TPBN1_UKTJ

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies. Our Contingent Workforce Solution (CWS) is one way we support our clients. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed. On behalf of our globally respected client who develop cutting-edge technologies that deliver clean, safe and competitive solutions to meet the planet's vital power needs we are looking for a HSE Business Partner for a 12-month contract based in Barnoldswick. Job description - the role As a HSE Business Partner, you will lead Health, Safety & Environment (HS&E) initiatives locally, aligning them with business priorities through a deep understanding of the local HS&E performance and risk profile. You will coach managers to strengthen their HS&E leadership and ensure effective implementation across operations. Acting as the principal HS&E point of contact for your assigned areas, you will deliver on agreed improvement plans while proactively identifying emerging issues. Additionally, you will promote best practices and collaborate closely with Business HS&E and the wider HS&E function to foster teamwork and ensure alignment with both business and functional strategies. Core duties and responsibilities: Provide support and HSE advise to the Barnoldswick campus Work with the site HSE Co-ordinators (shopfloor full time staff) to ensure compliance with legal and company standards Support investigations and help to identify solutions across all incidents & HSE Observations raised Support the Occupational Health requirements with regards health exposures and mitigate / reduce risks where appropriate Provide weekly / annual HSE statistics for reports needed by the business and central HSE function Help to support the business with statutory requirements such as, inspections, audits and regulatory visits Key skills and experience required: Must hold a NEBOSH Diploma in Occupational Health and Safety (or equivalent) and NVQ level 4 Qualified member of an appropriate HSE professional body such as IOSH with evidence of continual professional development (CPD) Demonstrated experience in influencing managers and taking a stand when the situation demands it Strong leadership qualities Strong inter-personal and communication skills Preferred Requirements: Experience of working in aerospace or manufacturing background but we will also consider a construction background Chemical management experience - COMAH and Environmental Permit knowledge/experience would be an advantage Next steps We will only accept workers operating via an Umbrella or PAYE engagement model. If you are interested in applying for this HSE Business Partner position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business TPBN1_UKTJ

Mechanical Design Engineer (Contract) We are seeking an experienced Mechanical Design Engineer to support ongoing engineering projects onsite at a client manufacturing facility in the North West. This is a hands-on contract role requiring strong CREO expertise and prior experience within the automotive or commercial vehicle sector. The role is primarily onsite and offers flexibility to support different teams and projects across the engineering function as business needs evolve. Responsibilities Deliver mechanical design solutions using CREO (PTC Creo) Support the development of components and systems within automotive and commercial vehicle programmes Work across multiple engineering areas depending on project requirements Collaborate with cross-functional teams including manufacturing, validation, and quality Ensure designs meet industry standards, performance requirements, and manufacturability guidelines Participate in design reviews and continuous improvement activities Requirements Proven experience in mechanical design engineering Strong proficiency in CREO (PTC Creo / ProE) Background in automotive, truck, or commercial vehicle industries Solid understanding of engineering fundamentals such as GD&T, DFM, and design validation Ability to work onsite in the North West Flexible and adaptable approach to support different teams and projects Additional Information This role operates inside IR35 Flexibility is required to move across departments based on business needs Immediate start preferred (subject to availability)

Planner Civils North West Permanent competitive salary+ package car allowance or car + benefits We are seeking a highly organised and detail-oriented Planner specialising in Civil Engineering projects. The successful candidate will play a pivotal role in coordinating and scheduling civil infrastructure projects, ensuring that all phases are executed efficiently and within specified timelines. This role offers an excellent opportunity for professionals with a strong background in civil project planning, design, and management to contribute to innovative infrastructure developments. The ideal applicant will possess a comprehensive understanding of civil systems, construction processes, and relevant software, supporting the seamless delivery of complex projects. My client has an exceptional pipeline with recent projects consisting of road schemes, bridge works, public realm, reservoirs and general civil engineering schemes based predominantly in the North West. Duties Develop detailed project schedules using specialised software such as Primavera P6 or MS Project, aligning with project milestones and resource availability. • Prepare and review technical schematics, system designs, and land surveying data to inform project planning stages. • Utilise AutoCAD, Civil 3D, Revit, MicroStation, and CAD tools to create accurate civil drawings and schematics that meet project specifications. • Coordinate with multidisciplinary teams including engineers, surveyors, and construction managers to ensure project alignment and timely progression. • Monitor project progress against schedules, identify potential delays or issues, and implement corrective measures proactively. • Assist in the preparation of tender documents and technical reports to support project proposals and stakeholder communication. • Ensure compliance with relevant standards and regulations throughout all phases of the project lifecycle. Experience HND, NVQ Level 3, or equivalent industry qualification. • 3-5 years' experience as a Planner within construction or civils. • Strong IT skills, including Primavera P6, Powerproject, MS Project, Visio and CorelDraw. • Valid CSCS card. • Site experience desirable. • Good understanding of NEC3/NEC4 contract requirements. • Solid construction and civils knowledge with the ability to assess alternative solutions. • Strong grasp of Compensation Events, EOTs, and entitlement processes. • Confident user of P6, including resource/cost loading, critical path analysis, baselines and variances. This is an opportunity to join a well established contractor that can offer clear lines of progression within the business. To apply please email your CV to (url removed) or contact me on (phone number removed). Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Intermediate Estimator - Location: Lancashire, UK £45,000 - £55,000 per annum + package About the Role We are seeking an Intermediate Estimator to join a busy and forward-thinking construction business delivering industrial, commercial, residential, and refurbishment projects up to £20 million. The successful candidate will assist in preparing accurate and competitive estimates, supporting the senior estimating team, and contributing to bid submissions. Causeway software experience is essential. Key Responsibilities Assist in preparing cost estimates for industrial, commercial, residential, and refurbishment projects. Review drawings, specifications, and tender documents to understand project requirements. Obtain and evaluate subcontractor and supplier quotes. Maintain estimating databases and standard rates, including labour, plant, and materials. Support the production of tender submissions, bills of quantities, and cost reports. Collaborate with the commercial and project teams to ensure accurate and timely estimates. Key Requirements Experience as an Estimator within the construction sector, ideally covering industrial, commercial, residential, and refurbishment projects. Competent in Causeway software. Strong numeracy, analytical, and organisational skills. Good communication and teamwork abilities. Ability to manage multiple tasks and work to deadlines. Proficiency in Microsoft Office Suite. What We Offer Competitive salary of £45,000 - £55,000 plus benefits package. Opportunity to work on high-value and varied construction projects. Supportive and collaborative work environment. Career development and professional training opportunities. Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris. Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Condition Surveyor (Building & M&E) – North West Council £28.33 per hour Umbrella / £22.65 PAYE 37 hours per week Temporary Contract Service Care Solutions are currently recruiting for a Condition Surveyor (Building & M&E) on behalf of a Council based in the North West. This is an The successful candidate will work within the Capital Programme team, carrying out condition surveys across a varied property portfolio, identifying defects, prioritising remedial works and supporting the wider asset management strategy. The role is field based and will involve travelling across the North West, so applicants must be able to manage their own workload and work independently. Responsibilities Undertake detailed condition surveys of educational and operational buildings Assess building fabric, mechanical and electrical elements and identify defects Recommend appropriate remedial works, priorities and estimated costs Input survey findings and condition data into the Council’s asset management system Identify health & safety, statutory compliance and building-related risks Work closely with the Capital Programme Officer and wider Asset Management team Liaise with site managers, schools, premises staff and other stakeholders Assist in the development and improvement of survey systems and processes Produce ad-hoc inspections, reports and programmes of work where required Support the delivery of planned maintenance and capital works programmesRequirements Degree qualified in Building Services Engineering, Building Surveying, Mechanical & Electrical Engineering or a related discipline Minimum 5 years’ experience in a Building Services, M&E or Condition Surveying role Strong knowledge of building pathology, construction methods and M&E systems Experience carrying out condition surveys across public sector, education or operational buildings Understanding of health & safety legislation, codes of practice and current standards Experience of identifying defects, prioritising works and estimating remedial actions Previous experience using asset management or property database systems Experience working within local authority or public sector environments is highly desirable Knowledge of Department for Education condition survey methodology would be advantageous Full UK driving licence and access to a vehicle insured for business use Professional membership such as CIBSE, IMechE or equivalent would be desirableIf you're looking for work but this role isn’t for you, please feel free to get in touch with what you're looking for. Contact: James Glover at Service Care Solutions on (phone number removed) or via email at (url removed)

Job Title: Electronics Repair & Workshop Manager Location: Colne, Lancashire Salary: Circa £ 3 5 ,000 - £ 4 5 ,000 depending on experience About Us: Our client is more than just a distributor. With over 20 years of experience, they have become a trusted partner to professionals across the entertainment, architectural, installation, and leisure industries. Job Summary: They are seeking an experienced and driven Electronics Repair & Workshop Manager to lead our bench repair operations. The ideal candidate will have a strong background in electronics repair combined with proven management experience. This role is essential in overseeing day-to-day workshop activities, ensuring high-quality repair standards, and driving operational efficiency while supporting and developing the technical team. This is a hands-on leadership role suited to a mature professional seeking a permanent, long-term position within a growing company. Duties: Lead and supervise the bench repair team, ensuring productivity and quality standards are consistently met. Ensure high standards of testing, rework, and quality control are maintained across the team. Allocate workloads effectively and monitor repair turnaround times. Maintain accurate records of repairs, testing procedures, and maintenance performed. Implement and improve repair processes to increase efficiency and reduce repeat faults. Manage stock levels of PCBs, spare parts, and workshop consumables. Provide technical guidance, mentoring, and training to junior technicians. Ensure compliance with health & safety and quality control procedures. Assist in the setup, configuration, and testing of PCBs and finished equipment as required . Liaise with other departments to ensure smooth operational workflow. Technical Requirements: Strong understanding of electronic principles and circuit functionality. Experience diagnosing faults to PCB or module level. Confident in safely removing and replacing PCBs and electronic assemblies. Proficient in the use of hand tools, test equipment, and diagnostic instruments. Ability to carry out systematic fault diagnosis and functional testing. Management & Leadership Requirements: Proven experience managing or supervising a technical repair team. Strong organisational and workload planning skills. Ability to motivate, mentor, and develop team members. Excellent problem-solving and decision-making abilities. Strong communication skills with a professional and mature approach. Ability to balance hands-on technical work with leadership responsibilities. Qualifications & Experience: Significant experience in electronic repair and maintenance. Previous management or supervisory experience in a technical environment. Strong mechanical aptitude with a practical, hands-on approach. Ability to work effectively in a fast-paced environment. We are looking for a committed and reliable individual seeking a stable, long-term career opportunity within our company. If you are passionate about electronics and ready to take the next step into a leadership role within a well-established and forward-thinking business, we would be delighted to hear from you. TPBN1_UKTJ

Senior Estimator - Lancashire, UK £70,000 - £80,000 per annum + package About the Role We are seeking an experienced Senior Estimator to join a busy and forward-thinking construction business. The successful candidate will be responsible for preparing detailed cost estimates for a range of projects including industrial units, offices, residential developments, and refurbishment schemes up to £20 million. This role requires someone with strong commercial acumen, excellent attention to detail, and the ability to work under pressure to tight deadlines. Knowledge and experience of Causeway software is essential. Key Responsibilities Prepare accurate and competitive cost estimates for industrial, commercial, residential, and refurbishment projects. Review tender documentation, drawings, and specifications to ensure comprehensive understanding of project requirements. Liaise with subcontractors, suppliers, and project managers to obtain quotes and confirm pricing. Maintain and develop estimating databases, including standard rates, labour, plant, and material costs. Produce tender submissions, bills of quantities, and cost reports. Collaborate with the wider commercial and project teams to support bid strategy and value engineering initiatives. Ensure all estimates adhere to company procedures and industry best practices. Key Requirements Proven experience as a Senior Estimator within the construction sector. Strong background in industrial, commercial, residential, and refurbishment projects. Competent in Causeway software for estimating and cost management. Excellent numeracy and analytical skills. Strong communication and negotiation skills. Ability to manage multiple projects simultaneously and meet tight deadlines. Proficiency in Microsoft Office Suite. What We Offer Competitive salary of £70,000 - £80,000 plus benefits package. Opportunity to work on high-value, varied construction projects. Supportive and collaborative work environment. Career development opportunities and professional training. Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris. Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Civils Project Quantity Surveyor Permanent North West £55k+package My client is a reputable regional civil engineering contractor. With an extensive amount of works secured on frameworks across the north west. Due to this expansion, they require a Project Quantity Surveyor to join the team. As a business they deliver infrastructure projects such as Roads, Bridges, utilities and rail. As Project Quantity Surveyor your key areas will be on procurement of sub contractors, preparation and submission of external applications for payment, identification, pricing and agreement of change, valuation of agreement of sub contractor accounts and the commercial management of the projects. My client can offer a good variety of project exposure within civil engineering. This position is site-based covering projects across the north west in, Lancashire, Liverpool and Greater Manchester. As a project quantity surveyor you will have excellent communication skills, a natural problem solver with commercial acumen. You will have understanding of various forms of measurement and NEC engineering and construction contracts.Duties include; Management of sub-contractor procurement. Attend sub-contractor Pre-Contract meetings. Preparation of formal sub-contract Agreements. Measurement of works. Management of legal issues and disputes. Management of important commercial issues. Management of sub-contractor interim account Its ESSENTIAL to have; BSc, NVQ4 or MSC Qualification and with a relevant CSCS card. Make change to progress your career, join a business with extensive pipeline and growth opportunities. To apply please email your CV to (url removed) or contact me on (phone number removed). Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

We are committed to building a workforce that is reflective of the diverse community we serve. We want to attract applications from people of all backgrounds and underrepresented groups because we strongly believe in adding value through diversity, inclusion, and equality. : Are you ready to contribute to ambitious projects and create a positive impact in the aerospace industry? At Safran, you'll work with the brightest minds and best technologies, building valuable experience and joining an innovative, supportive team. We are a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long range commercial aircraft. Our expertise cover nacelle design, manufacturing, integration, maintenance and services. Our site in Burnley provides employment to almost 700 people and we are proud to be one of the largest private sector employer in Burnley. Due to an increase in production we are looking for motivated individuals to join our team. We're offering permanent contracts, in roles offering activities. ? & : Looking after the people who make Safran great is our priority. We offer a range of benefits designed to support you-both in and out of work, including: • Competitive salary * 37 hour working week over 4.5 days with a 1pm finish on Friday * 25 days' holiday + bank holidays (option to buy/sell) * Flexible working options and flexitime scheme * Pension (10% employer contribution) and life assurance * Professional development, ongoing training, mentoring * Onsite amenities: parking, restaurant * Family-friendly and accessible workplace policies * Non-contributory BUPA private medical insurance plan * Plus much more : Our Sheet Metal Components team work with materials like steel, aluminium and titanium to produce precision aerospace parts. You'll use engineering drawings, templates and fixtures to install a range of aerospace fasteners and components to exact engineering and quality standards. ' : • Assemble and install sheet metal components using engineering drawings, templates, and fixtures - Work with materials such as steel, aluminium, and titanium in accordance with industry standards - Fit aerospace fasteners and parts to engineering and quality requirements - Use tools and equipment safely and accurately, always maintaining quality benchmarks - Collaborate closely with team members to achieve production targets and uphold excellence ' : • Time-served apprenticeship - Excellent practical skills for using tools and equipment - Strong concentration skills for cutting, drilling, and working safely and accurately - Ability to understand technical drawings and visualize finished products - Experience working in a direct manufacturing environment : Here, we craft excellence together. If you're looking for a place to grow, make an impact, and be part of something bigger, we'd love to hear from you. We are committed to building a workforce that is reflective of the diverse community we serve. We want to attract applications from people of all backgrounds and underrepresented groups because we strongly believe in adding value through diversity, inclusion, and equality. We encourage you to apply if you can demonstrate a variety of skills and experiences relevant to the requirements of this role, even if you do not meet every criterion. We strive to provide reasonable adjustments throughout the recruitment process and employment. Let us know via ..@. if you need support to showcase your talents or require any reasonable adjustments with your application. Offers of employment will be subject to a relevant level of company security vetting, which includes a criminal record check

We're working with a reputable and long-established main contractor in the North West who is seeking an experienced Site Engineer to join their growing delivery team. This is a fantastic opportunity to be part of a company known for high-quality construction projects up to £20m across commercial, education & healthcare. Role Responsibilities Setting out and surveying works Interpreting drawings and specifications to ensure precise execution of works. Working closely with Site Managers, Project Managers, subcontractors, and suppliers to maintain programme targets. Conducting quality control and assurance checks, ensuring works meet client and regulatory standards. Managing site documentation, including method statements, risk assessments, and daily records. Supporting site health and safety and promoting a positive safety culture.Requirements: Degree in Civil Engineering, Construction Management, or related discipline. Demonstrable experience in a Site Engineering role with a UK-based main contractor. Competent with AutoCAD and site survey equipment Excellent communication and coordination skills. Full UK driving licenceBuilding Careers UK are specialist in Construction and Property recruitment. BCUK acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the Terms and Conditions, Privacy Policy and Disclaimers which can be found on our website INDC

An exciting opportunity has arisen for an experienced Valuation Surveyor to join a rapidly growing firm that specialises in delivering high-quality commercial valuation services. As a Valuation Surveyor, you will be conducting valuations and providing reports on a variety of residential and commercial properties, catering to lending panels, public sector and private clients. This role offers salary range of £50,000 - £70,000 and benefits. Candidates across the North West region will also be considered. What we are looking for: Previously worked as a Valuation Surveyor, Chartered Surveyor, Registered Valuer, Property Surveyor, Property valuer or in a similar role. Must have MRICS qualification. Posess RICS Registered Valuer status Have at least 3 years of post-qualification experience. Experience in commercial and residential property valuation. Ability to prepare detailed valuation reports Strong communication and client management skills. This role covers primarily the North West, and parts of North Wales, South West, and South East. This is a mid-career level role so we are not seeking candidates: who are recent graduates who are nearing retirement who only have overseas experience What's on offer: Competitive Salary OTE in line with the salary band Flexible / hybrid working options Higher salary for more experienced candidates Ability to to work remotely with full company system access provided Apply now for this fantastic opportunity for an experienced Valuation Surveyor to join a respected organisation and make a real impact. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003

Technical Services Manager Burnley £48,000 + Business use car and 5% Bonus Brief Technical Service Manager needed for a large well known Facilities Management organisation based in Burnley who are looking to employ an experienced and well-rounded Technical Service Manager that takes pride in their work. The successful candidate must have a strong technical background as well as at least 3 years' experience in managing a FM Operations Teams. Reporting to the Account Manager, you will be responsible for management of the Technical Services Team, including specialist contractors, to ensure the safe and continuous operation of all sites within the contract. The TSM coordinates site operations in compliance with company, contract and local operating procedures to ensure a standardised approach to the company's service delivery. Benefits Salary: £45,000 - £48,000 per annum 25 day's holiday Business use car Private medical care Variable annual bonus based 5-15% Pension Plan Career Progression What the role entails: Some of the main duties of the Technical Service Manager will include: Manage the onsite technical team including management of sickness, absence and holidays and involvement in appraisals and performance management Produce monthly reports for the Account Manager and ensure minimum service and unavailability deductions on all projects Ensure full compliance with relevant policies and procedures, codes of practice, statutory requirements and ensure professional standards are maintained; Develop and implement a dynamic planned preventative maintenance system to meet the changing requirements of the service and demands on plant and equipment; Ensuring both planned and reactive maintenance is carried out in line with budgetary and quality constraints and agreed service levels and legislation. Act as Technical Adviser to the Maintenance Team and relevant groups within the Company regarding management and operation of the engineering services, including the development and maintenance of contingency plans; Ensure risk assessments and method statements are in place as deemed necessary Ensure CAFM System is up to date at all times and ensure all reactive and PPM tasks are completed within project agreements. What experience you need to be the successful Technical Service Manager: IOSH Managing safely ONC/HNC in Facilities management (or equivalent in specialist trade) At least 3 years' experience in managing a FM Operations Team Experience of liaising directly with the client on similar FM projects Experience of undertaking AP/RP duties within similar FM projects Knowledge of relevant legislation and industry guidelines Possess a firm understanding of Health & Safety Knowledge of relevant legislation and industry guidelines Demonstrate a good understanding of health and safety principles This really is a fantastic opportunity for a Technical Service Manager to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website

Safran Nacelles is a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long-range commercial aircraft. Our expertise covers nacelle design, manufacturing, integration, maintenance and services. We were voted the 28th best worldwide employer in 2022 by Forbes. Our site in Burnley provides employment to almost 700 people and we are proud to be one of the largest private sector employers in Burnley. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: • 37 hour working week over 4.5 days with a 1pm Finish on Fridays (role dependant) - 25 days' holiday + bank holidays (plus the option to buy an additional 5 days) - 10% employer pension contribution (5% employee contribution with the option to increase via salary exchange) - Flex-time scheme that allows you to take two half days or one full day off per month - 4X life insurance benefit as a member of the pension scheme - Non-contributory BUPA private medical insurance plan - Excellent training, education, and development schemes - Enhanced sickness, maternity, adoption and paternity leave - Option to purchase Safran shares with additional free shares from the company - Excellent on-site catering facilities providing subsidised hot and cold meals - Corporate membership at the Crow Wood Hotel & Spa: Use of fitness suites, classes, pool & sauna, offering 54% discount as a gold member - Wellbeing support through our employee assistance programme: 24/7 mental health support, access to remote GP appointments, medical second options, and physiotherapy - Cycle to work scheme, along with a range of flexible benefits chosen by you! Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision. We are looking for passionate individuals to join our Manufacturing Engineering team as a Manufacturing Engineering Project Coordinator - Assemblies at our Burnley site. About Safran Nacelles: Safran Nacelles is a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long-range commercial aircraft. Our expertise covers nacelle design, manufacturing, integration, maintenance and services. We were voted the 28th best worldwide employer in 2022 by Forbes. Our site in Burnley provides employment to almost 700 people and we are proud to be one of the largest private sector employers in Burnley. Your Role Support the development, rate increase, industrialisation and sustainment of manufacturing processes to meet quality, HSE, delivery and cost requirements. Coordinate priorities and schedules within the Manufacturing Engineering team, manage cross-functional projects, and ensure accurate governance reporting. At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation. Why Safran? • A global presence: Be part of a global aerospace, defence & space business with over 100,000 colleagues, across 300 sites in 30 countries. - Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. - Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. - Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality

Assistant Site Manager A regional house builder have a requirement for an Assistant Site Manager for a new development in Lancashire with plans for 100 plus units, a mix of 2, 3, 4 and 5 bed homes with landscaped public spaces and a play park. The company create beautiful homes designed for modern living is desirable locations building lifestyles and communities in desirable locations. Assistant site Manager role Working closely with the Site Manager you will support the management of the construction phase ensuring the programme and budgets are met in line wit health, safety and environmental requirements. Duties and responsibilities: " Ensure construction works are carried out and monitored in accordance with current health, safety and environmental legislation " Support the supervision of, and management of, all contractors and labour force on site to consistently deliver to the highest standard of workmanship. " Manage material & subcontractor call offs ensuring efficient site operations and delays avoided. " Ensure construction works are delivered in line with site start budget including prelim allowances and minimise day works and variations " Deliver a 5-star product, ensuring high levels of customer satisfaction and minimal snags at handover stage, promoting a 'Getting it Right First Time' approach. Aim to reduce RIs and BRIs as part of an ongoing continual quality improvement process. " Undertake 10-day customer visits post completion to identify defects ensuring these are rectified promptly prior to handover to customer care. Provide regular updates to customers to ensure a positive HBF CCS survey response is received " Liaise with the technical department proactively on design queries and provide feedback on buildability in house type designs. " Attend, and chair where required, weekly subcontractor coordination meetings ensuring matters of programme, quality, HSE, and cost are discussed with actions agreed " Attend sales build meetings with the Site Manager and Sales Executive where required. " Attend development team meetings and contribute to discussions on development performance with cost and programme delivery being key considerations. " Contribute to the collation of handover pack information where required. " Ensure sites are properly secured with clear segregation between work areas and the public realm. Ensure sites are clean and tidy and well presented at all times. " Develop and maintain good working relationships with subcontractors, material supply chains, NHBC inspectors, and consultants. Skills & Experience " Experience in a similar role working on new build housing developments " Experience of managing quality and health and safety to high standards " Experience of dealing with customers and delivering open market sale developments " Knowledge of relevant legislation and government regulations. " SMSTS and first aid qualification. " Excellent communication and influencing skills with a strong customer focus. " Results driven with the ability to manage conflicting stakeholder priorities. What's on offer? The company are offering a competitive salary, (dependant on experience), car allowance, pension, healthcare, 26 days holiday, company bonus scheme and opportunities for career development for individuals who have the ambition to progress up the career ladder. How to apply If you are interested in the Assistant Site Manager role and would like to apply please contact Deena at Fawkes & Reece on (phone number removed) or apply via the link