Trabajos electrical testing en StourbridgeCrear alertas

Electrical Engineer £38K-£45K Offices in Hagley and travel An opportunity for an experienced Electrician to join a well-established Nationwide Facilities Management company based in the West Midlands who carry out pre-planned maintenance, small projects and reactive works on commercial sites across the UK. We are looking to recruit a qualified Electrician & multi-skilled engineer to join their team of engineers and carry out such works. The right person will hold relevant qualifications in electrical installation works including test and inspection and hold a clean driving licence. The engineer will also be responsible for the NICEIC Qualifying Supervisor role. Possessing additional skills/qualifications would be hugely advantageous but not essential (for example Air Conditioning, Commercial Gas, Plumbing, Fabric) and additional levels of salary can be obtained as a result. Benefits: • Company vehicle and fuel card, • Overtime paid at time and a half/double time, • Install, maintain, and repair electrical wiring, equipment, and fixtures in commercial buildings., • Diagnose and repair electrical faults and implement effective solutions., • Respond to reactive maintenance requests and urgent electrical issues., • Carry out mandatory testing [PAT, Emergency Lighting, Fixed wiring testing etc]., • Maintain electrical equipment such as lighting, distribution boards, emergency systems, and power outlets., • Conduct inspections and testing of electrical systems to identify hazards or defects to prevent breakdowns., • Complete compliance paperwork and applicable Certification., • Utilise power tools and hand tools safely and efficiently., • Adhere to all safety regulations and codes while performing tasks., • Maintain accurate records of work completed via portal CAFM systems.., • Follow all workplace safety rules (risk assessments, method statements). Essential • Electrical Inspection and Testing (C&G 2391, Level 3), • Level 3 Diploma in Electrotechnical services (or equivalent), • Up-to-date with current standards, and assessed for competency in line with 18th Edition BS7671, • NICEIC qualified supervisor experience, • Minimum of 5 years electrical experience, • Full Driving Licence, • Computer/PDA literate, able to complete and submit electronic reports accurately and effectively, • Driven with positive attitude, willing and able to carry out large volumes of work Desirable • Additional qualifications can increase the salary attained (F-Gas, Gas Safe, NVQ Plumbing/Heating, etc)

Your Company:This is an opportunity for a knowledgeable Commissioning Engineer to join a leading engineering business, to work in the Stourbridge area with travel across the country.Your RoleWhile in this position your duties may include but will not be limited to: • Checking relay and control panels, • Verifying and handling continuity checks for electrical schematics, • Handling primary and secondary testing for substations, • Undertaking a range of testing including ratio tests, winding IR tests, switchgear functional checks and testing in accordance to manufacturer guidance, winding resistance and also magnetising current measurements, collection oil samples and testing alarm devices, • Additionally, handling HV, AC and DC cable testing, ranging from 1kV DC up to 35kV and also VLF testing up to 66kV RMS and from this finding faults proactively, • Doing secondary current injection to relays with the aim of testing protection functions including 50/51 and 50N/51N and handling secondary voltage injection tests for ROCOF, LOM and OV, UV, OF, UF, • Configuring relays logic, • Supporting on high voltage switching operations, • Preparing RAMs for commissioning activities and the testing reports after each activity has been completedYou MUST HavePlease apply ONLY if you meet the following criteria:, • Electrical or Engineering degree, or a related industry qualification, • Possess knowledge of Omicron CMC365 secondary injection test kit or similar, • Understanding of Hi-Pot, Ductor, VLF, IR Testing and HV cable fault finding, • Additional knowledge surrounding IT and PC network setting adjustment, • Familiarity with electrical schematic drawings for up to 33kV, • Good technical and analytical skills, • Excellent communication skills, • Problem solving abilitiesYour Opportunity: As an active entity within the renewable energy sector, this company is a key player in important projects, offering a range of services, from project management to design, procurement, construction and maintenance services. The position holder will be responsible for undertaking electrical testing, troubleshooting for various projects and the job holder will also support on electrical engineering and testing activities.This business will offer the successful candidate a starting salary of up to £80,000, which will be highly dependent on previous experience and relevant knowledge pertinent to the role. Additionally, there will be strong incentives provided, including a strong holiday allocation, pension contribution and monetary incentives. The company will also provide use of a van and expenses allocations for fuel or travel costs. As well as this, there will be excellent opportunities for progression, under the guidance and leadership of senior management professionals. You will also be given the tools and materials to advance your knowledge and keep your skills up to date as well. To enquire further about this role, please reach out to our dedicated recruiter:Christina Smith - Senior Talent Acquisition SpecialistM: E:

A global friction welding manufacturer is looking for an Electrical Design Engineer to join their team based just outside the Birmingham area The ideal candidate will be a hard-working and adaptable Engineer with a strong design background. Operating at the West Midlands site, you will be responsible for the design and technical support of industrial control panels and more This is a fantastic opportunity with a multi-national welding company who supply to some the biggest names in the world Role: Electrical Design Engineer Office Location: Birmingham area Salary: £55,000 - £60,000 The key responsibilities of the Electrical Design Engineer role will be: • Prepare and configure both standard and custom electrical wiring drawings, along with complete Bills of Materials (BOMs)., • Ensure all designs comply with relevant regulatory, design, and testing requirements., • Produce design documentation including drawings, calculations, and technical specifications., • Collaborate with suppliers to ensure delivered solutions meet required performance standards., • Provide technical guidance and promote best practices in industrial control panel design., • Maintain compliance with applicable design and testing standards throughout project lifecycles., • Develop and support test rigs, simulation models, and prototype control systems., • Generate safety approval and sign-off documentation., • Perform calculations in line with applicable standards (e.g. BS EN 13849) and demonstrate a strong understanding of relevant electrical standards (e.g. IEC 60204) The key requirements of the Electrical Design Engineer will be: • Proficiency in electrical design software such as AutoCAD Mechanical/Electrical and EPLAN., • Strong working knowledge of Microsoft Office applications., • Solid understanding of industrial electrical systems and control panel design., • Familiarity with relevant safety and compliance standards. Executive Network Group, encompassing Technical Network, Network HR, HSE Network & Procurement People, sourcing mid to senior level management for automotive, aerospace, engineering and manufacturing industrial sectors, with a portfolio of services including executive search, advertising, MRO for permanent and interim contract recruitment services

Position Overview The Automatic Coffee Engineer (Coffetek Vitro Specialist) is responsible for installing, configuring, servicing, and optimizing Coffetek Vitro automatic coffee machines across customer sites. If you are considering sending an application, make sure to hit the apply button below after reading through the entire description. This role requires strong technical ability in mechanical, electrical, and software systems, along with expert knowledge of Vitro product lines. The engineer ensures reliable performance, consistent beverage quality, and excellent customer support for all Coffetek Vitro equipment. Benefits Tools, uniform, and mobile phone/tablet provided. Full training on Coffetek Vitro machines and ongoing technical development. Opportunities for careerprogression within the technical team. Competitive salary with overtime availability. Company pension scheme, paid holidays, and additional perks. Extended holiday allowance after 2 years service Key Responsibilities Installation & Commissioning Install and set up Coffetek Vitro machines (e.g., Vitro S1, S3, S4, M Series). Configure recipes, software settings, payment modules, and user interface screens. Connect water systems, calibrate grinders, adjust milk systems, and set beverage parameters. Maintenance & Technical Support Diagnose and repair mechanical, electrical, and software faults specific to Vitro systems. Perform regular preventive maintenance, including brew-unit servicing, grinder calibration, cleaning cycles, valve replacements, and descaling. Utilize Coffetek diagnostic tools, firmware menus, and error codes to troubleshoot efficiently. Maintain accurate service reports and parts usage logs. Optimization & Performance Fine-tune beverage recipes, temperature settings, and grinder adjustments for optimal quality. Review usage data and error logs to maximize uptime and machine reliability. Recommend upgrades or modifications (e.g., payment systems, water filtration, telemetry interfaces). Training & Customer Support Train clients and staff on machine operation, cleaning routines, software navigation, and first-level troubleshooting. Provide responsive on-site and remote technical support for Vitro machines. Assist customers with setup variations (fresh milk, instant products, canisters, cup sensors, etc.). Compliance & Standards Ensure all installations meet manufacturer guidelines, safety standards, electrical requirements, and hygiene regulations. Stay current with Coffetek updates, firmware releases, and new Vitro product improvements. Qualifications Experience servicing automatic or super-automatic coffee machines; Coffetek Vitro experience strongly preferred. Technical background in mechanical, electrical, or electromechanical engineering. Strong troubleshooting skills and familiarity with machine diagnostics and firmware menus. Understanding of coffee extraction, grinder calibration, and automated milk/soluble systems. Strong communication skills and the ability to support both technical and non-technical users. Ability to lift and manoeuvre coffee machines and parts. Preferred Qualifications Certified training on Coffetek or Azkoyen Group equipment. Experience with telemetry/IoT platforms (e.g., Coffetek Distance Selection, machine monitoring solutions). xrnqpay Background in vending, OCS (Office Coffee Service), or food-service equipment engineering. Knowledge of water filtration, hardness testing, and scale prevention Job Type Full-time Field-based, on-site service Travel to multiple customer locations required If you think you're right for the job Apply Now!

We offer our mechanics: £40,000 - £50,000 DOE plus benefits Additional opportunity to earn up to £9,000 every three years in performance bonuses(terms and conditions apply) All overtime paid at time and a half Oldbury Motorstore Starting from 33 days annual leave (with room to grow) Flexible hours Toolbox cover Training provided to become an EV accredited Technician Generous employee discounts Opportunities to review salary yearly Private healthcare and sick-pay cover Maternity and paternity packages Mechanics, we couldnt do it without you As a mechanic, youll safely prepare our customers cars for the road ahead. Youll care about every detail and take pride in doing a meticulous job. Above all, youll want to be part of a capable, motivated team who feel the same way. Youll get the chance to work on an incredible range of manufacturers and models, developing your skills and staying up to date with the very latest in vehicle technology. Essential skills A certificate in Light Vehicle Maintenance Level 3 and solid work experience in the automotive industry The ability to work in a competent and efficient manner on your own or part of a busy team Strong communication skills Good attention to detail The ability to carry out work to high standards and to deadlines A proactive and enthusiastic approach The ability to accurately follow written and spoken instructions A full driving licence Day-to-day duties Carrying out servicing, repairs and maintenance to high standards Inspecting vehicle engine and mechanical/electrical components to diagnose issues accurately, using computer-based diagnostic equipment Repairing or replacing broken or defective parts Carrying out DVSA vehicle testing (if authorised) Road testing vehicles to check repairs Maintaining equipment and making sure tools are in good condition. Following checklists to ensure all procedures are completed Completing all documentation to the required standard Our Culture Arnold Clark is committed to creating a diverse and inclusive workplace. We strive to create an environment where collaboration, unique perspectives and multiple approaches are celebrated. We care about our employees and our communities, we nurture talent and encourage ambition, and we are passionate about people who take pride in their work. Our employees are at the heart of everything we do - diverse in our make-up, united in our goals. To find out more about Life at Arnold Clark , visit our website. Employment within the Arnold Clark Group is offered subject to satisfactory reference and disclosure check.

A leading energy services company in the UK is seeking an experienced Electrical Tester to carry out electrical installation testing and produce necessary reports to meet compliance standards. Candidates must have NVQ level 3 in Electrical Installations and a City & Guilds 2391 qualification.

As a Applications Engineer you will be the bridge between the workshop and the customer. On one side, you will be pulling machines apart, testing them under different conditions, creating samples, measuring results, and trying to break them before they ever reach a customer. On the other, you will be explaining what it all means, writing reports, presenting options, and showing customers how their machine can perform in the real world. No two days will look the same... some will be spent fault finding and analysing data, others will be with customers, talking through specifications, metallurgy, coatings and durability. You are working for a company where the applications can be used in a huge variety of industries. You are someone who enjoys problem solving, variety and turning complex engineering theory into practical answers. This could suit a graduate engineer with some experience already behind them, perhaps your second or third role since university, you will understand the theory and now have the chance to put all of that into practice in a role where you are both hands on and customer facing. What will help you succeed here? An engineering background with the theory to back it up Experience across mechanical, electrical or materials processes Curiosity to take machines apart and test them properly Strong analytical skills, with the ability to write clear reports Confidence working directly with customers to present practical solutions The salary on offer here is between £35,000 and £45,000, depending on the experience you are bringing. There are so many benefits to working here, too many to list them all. But they include 25.5 days holiday plus bank holidays, pension, health cover, death in service, proper training, recognition schemes, bonus potential and more. And if you are looking for progression the door is open, whether that means developing into management or excelling as a Applications Engineer at the top of your game. As a Applications Engineer its about exploring, testing and proving what these machines can really do, then turning that knowledge into solutions for customers. This role is exclusive to Marshall Harmony; you won't be contacted by any third parties. If you'd like more info or want to talk it through, just drop us a message, tag someone who'd be perfect for this below or send your CV to the email above. By submitting my CV, I acknowledge and accept that Marshall Harmony will collect and process my personal information for recruitment purposes and will retain it for a minimum of 24 months in accordance with their Privacy Policy and T&Cs, available at: (url removed)/ | (url removed)/terms-conditions/ Before this retention period expires, Marshall Harmony will contact me to ask whether I wish my data to remain on file within their talent pool