Electronics jobs in ManchesterCrear alertas

My client, an industry leader in connector and cable assembly solutions are looking for a Remote Product Manager - RF to join their global team, specifically to focus on RF and Board to Board related products.Key Responsibilities of the Remote Product Manager - RF job:.Manage the New Product Introdu

Electronics Engineer 12 month contract Based in Bolton Offering circa £35ph Inside IR35 Are you an experienced Electronics Engineer? Do you have experience in Calibration and Maintenance? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Servicing Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE), • Fault finding and repair of test equipment, • Supporting routine calibrations, • Commissioning of Test Equipment, • Drift analysis, • Calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave Your skillset may include: • HNC/HND in Electrical & Electronics Engineering, • Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level, • Able to utilise instructions, handbooks, drawings, or specifications to provide technical advice/guidance, • Conduct measurements and repairs down to component level, • Good understanding of calibration principles and processes, • Able to mentor other or more junior staff, • Understanding of SAP, • Experience working on Environmental Chambers If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

BASED AT THE MANCHESTER UNIVERSITY.Flexibility essential between 9:00am and 6:00pm.Providing essential support to both students and staff.Ensuring the smooth operation of teaching laboratories.

Our Manchester based client is currently searching for a Failure Analysis Engineer to join the Quality department. The role will involve analysing product failures at the device and system levels to determine underlying causes. Assisting customers with product failures will be part of the role as well as creating comprehensive reports that detail failure modes, root causes, and corrective actions. Supporting yield management will also be an important part of the role. Required skills for the Failure Analysis Engineer will include: • Experience with semiconductor failure analysis techniques (SEM, EDX, X-ray, OBIRCH, FIB etc), • Semiconductor device knowledge and component level experience, • Strong analytical skills and communication skills, • Degree in Electronics or Engineering: A strong academic background in electronics, physics, semiconductor physics or a related field Please contact Rachel Anderson for further details.

Who are Chroma Engineering? Mission: Delivering the talent and skills that make British Engineering & Manufacturing a global leader. Established in 2017, Chroma Engineering is a values-led business committed to working in partnership with our clients and candidates to put the human element back into recruitment. With over 80 years’ combined experience, we focus purely on the UK’s Engineering & Manufacturing sector placing people within Electronics, Software, Mechanical, Electrical, Controls, Robotics, Manufacturing, Production, Supply Chain and Technical Sales. Our values (Teamwork, Commitment, Humility & Respect) are at the forefront of our culture as well as the service we provide to our clients and candidates. We are proud of who we are and what we do. We’re on the hunt for talented or aspiring recruiters ready to take the next step in their career, and build and run their own desk. Benefits • An uncapped commission scheme with no threshold!, • Extra day off for your birthday, • Company shutdown over Christmas, • 25 days of holiday + bank holidays, • Health cash plan, covering optical, dental, physio, employee assistance programme and more, • External & Internal L&D/training opportunities, • Multiple incentive trips abroad, • Regular social events and company incentives What can you expect from the role? • Hands on as a 360 recruiter, developing your own desk, • Joining a team with warm patches and clients, • Search for and identify top candidates using our CRM, LinkedIn, job boards and your own professional network, • Create exciting job adverts for client vacancies, • Qualify candidates via video and telephone, • Facilitate negotiations between clients and candidates, • Manage the full client and candidate process from CV introduction through to job offer, • Leverage social media to develop your own personal brand What are we looking for from you? • Recruitment or sales experience (preferred), • Self-starter, determined, and driven to succeed, • A natural rapport builder who can develop solid relationships, • Solutions-focused and curious, • A passion for innovation and bringing ideas to the table If all this sounds like what you’re looking for, then we’d love to hear from you! Apply here or call Will on 0161 826 1120.

Location: Manchester, The UK, Hybrid Working Option Job Type: Permanent Employment, Full Time Reports Line (Solid): General Managers of MUK & MFR Report Line (Dotted): Chief People Officer Europe Languages Required: English and French (preferred) ABOUT MIDEA GROUP Midea Group is a publicly listed Global Fortune 500 company and is the world’s leading manufacturer of home appliances. Committed to bringing innovation to life, Midea Group goes beyond smart home appliances and comprises business pillars like HVAC and Building Technologies, Robotics and Automation, Electro-Mechanical and Digital Innovation. Being ranked #246 in the 2025 Global Fortune 500 List, Midea is proud of its 190,000+ employees and presence in 200+ countries, including several subsidiaries in the European market. • $56 billion Sales Revenue 2024, • 44 Manufacturing Base Globally, • 38 Innovation Centers Globally, • 90.000 Patents Granted 2024 ABOUT MIDEA EUROPE Midea's commitment to Europe goes beyond expanding its market reach. It’s also building a sustainable and innovative presence in the European market through localized operations, technological advancements, and an emphasis on energy-efficient solutions. CLICK VIDEOS HERE and some key M&A activities in the region (KUKA, Teka and ARBONIA climate). • Midea UK is a subsidiary of Midea Group covering the United Kingdom and Ireland. Ground Floor, 12 Blackfriars Street, Manchester, M3 5BQ UK., • We deliver leading MDA and SDA consumer electronics alongside comprehensive HVAC solutions. POSITION OVERVIEW The HR Manager for Midea UK & France will lead the full spectrum of HR operations across both BUs, ensuring alignment with regional HR strategy while building solid local HR foundations. This role oversees core HR cycles, payroll delivery, policy development, and day-to-day people support, acting as a key partner to business leaders and a hands-on enabler of efficient, compliant, and scalable HR practices. KEY RESPONSIBILITIES • Execute Regional HR Cycles - Take full ownership of BU HR processes—including HR budget and workforce planning, performance management, salary adjustment and bonus coordination and HR report—ensuring UK & France stay aligned with HQ & regional standards and timelines., • Partner with Leaders & Employees - Support managers with performance and people matters, conduct interviews and engagement conversations, contribute to talent and capability discussions, support training initiatives, and promote a positive employee experience with light ER involvement., • Lead Payroll & Vendor Management - Deliver UK & France payroll with external providers, ensuring accuracy across salaries, allowances, deductions, pensions, and social charges. Manage HR vendors including payroll providers, recruiters, benefits partners, and other HR or legal consultancies., • Provide Hands-on HR Support - Act as the go-to HR contact for daily employee inquiries, recruitment coordination, policy clarification, and general HR services to keep the organization running effectively., • Drive HR Operations & Digitization - Implement HRIS, streamline workflows, enhance documentation management, and build a smooth operational backbone covering onboarding, offboarding, contracts, and lifecycle administration., • Build Local HR Policies & Frameworks - Develop and maintain core HR policies (handbooks, benefits policy, attendance rules, documentation templates, internal audit) to establish a full chain of HR operation SOPs, and build a compliant, scalable HR framework for both UK and France. KEY REQUIREMENTS • Bachelor degree or above, fluent in English; French is a strong plus;, • Proven local HR experience in the UK or France for at least 5 years; experience covering both is a strong advantage;, • Solid knowledge of local labor laws, statutory requirements, payroll practices, and HR operations;, • Strong communication, stakeholder management, and problem-solving skills;, • Hands-on, structured, and comfortable balancing both operational tasks and strategic HR responsibilities. WHAT WE OFFER • Europe is a strategic pillar of Midea’s global expansion, offering exceptional professional growth opportunities;, • An international, goal-oriented, and collaborative work environment;, • Robust training and career development programs;, • Competitive, country-specific employee benefits tailored to local markets. Midea Group is an Equal Opportunity Employer where diversity & inclusion matters. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Mechanical Design Engineer We are seeking an experienced Mechanical Design Engineer to join our clients growing aerospace engineering team. In this role, you will contribute to the design and development of high-precision mechanical systems used in cutting-edge aerospace applications. You will work closely with multidisciplinary engineering teams to deliver robust, reliable, and manufacturable solutions for demanding environments. Key Responsibilities • Design and develop high-precision mechanical assemblies for aerospace systems and components., • Create detailed 3D CAD models and engineering drawings using SolidWorks, ensuring compliance with aerospace drawing standards., • Perform FEA simulations (structural, thermal, flow) to validate performance under aerospace operating conditions., • Collaborate with manufacturing partners to ensure designs are optimised for CNC machining, assembly, and aerospace-grade reliability., • Manage design documentation using PDM/PLM systems, including ECO/ECN processes., • Work closely with cross-functional teams in electronics, RF, and systems engineering. Experience Required • Bachelor’s or Master’s degree in Mechanical Engineering (or equivalent)., • Strong proficiency with 3D CAD tools (SolidWorks preferred)., • Experience designing high-precision mechanical assemblies., • Solid understanding of manufacturing processes and materials., • Practical experience with FEA tools., • Excellent understanding of GD&T and engineering drawing standards., • Knowledge of high-volume manufacturing processes., • Experience with thermal management of electronics. Apply today for more information!

Field Service Engineer UK £45K - £50K (OTE £58K - £62K) DOE Permanent My client is a specialist in food processing and bakery equipment. They are on the lookout for an experienced Field Service Engineer to join their team based in the UK. Key Responsibilities – Field Service Engineer • Working across the UK working on food process and bakery equipment – pie/pizza lines, • Mechanical build, install, servicing and commissioning, • Electrical breakdowns, • Willing to occasionally travel internationally – travelling out to head office in Holland to assist colleagues and attend training Qualifications & Experience – Field Service Engineer • HNC/HND or City & Guilds within engineering, • Experience of working on machinery within the following industries Paper, Pastry/bakery, Print, Food Manufacturing, Textile or Injection Molding, • Have a strong track record in field and service engineering, • Strong mechanical and (basic) electrical engineering skills, • Experience with Siemens PLC controls is an advantage On Offer – Field Service Engineer • £45K - £50K (OTE £58K - £62K) DOE, • Overtime – Saturday (x1.5) Sunday (x2) and Bank Holiday (x2), • Paid door to door, • Monday – Friday with occasional weekend work, • Company Car – Nissan Navara, • 25 days holiday + bank holiday, • Discretionary bonus, • Pension – 8.75% then company will match, • Driving Licence For more information on this role, please contact Harry Waller on 01453 829778 or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. For details of other opportunities available within your chosen field please visit our website

Kratos Analytical are global leaders in surface analysis instrumentation, our XPS systems are installed in leading University’s and Corporate research centres around the world working on new materials challenges as diverse as development of new biomaterials, carbon capture to achieve net zero targets and EV battery development. An opportunity exists to join our Customer Support Team at our Manchester HQ as a Customer Support Service Engineer with frequent travel (~50%) to continental Europe, occasionally further afield. The role would suit a customer facing candidate, comfortable with the operation and maintenance of complex instrumentation and a passion for travel. Responsibilities • On customer site installation of upgrades, delivery of warranty work, ad-hoc maintenance and planned preventative maintenance visits, • Testing of repaired units before returning to customers, • Obtaining customer acceptance for all work done, • Providing customer technical support, • Providing appropriate customer training, • Supporting continuous improvement initiatives with close interactions with R&D Qualifications • Degree level qualification in Electronics*, Physics* or Mechanical Engineering* (*with experience and background in scientific instrumentation preferred)- Essential Experience • Knowledge of techniques such as X-ray Photoelectron Spectroscopy and the ability to demonstrate a background in scientific instrumentation would be a distinct advantage Job Related Aptitude and Skills • Excellent problem-solving skills (E), • Good personal time management skills (E), • Good communication skills are required at all levels (E), • Strong Customer Service skills and a professional manner in customer facing environments (E) Note - On successful completion of probation, a frequent traveller allowance will be added to your salary. We welcome applications from graduates who have studied a relevant degree. We know that great talent comes in many forms and you don't need to meet every requirement to make a strong contribution. If you are passionate about the role and believe you could add value to our team, we encourage you to submit your application.

Purpose of the role: To provide daily repair, preventative maintenance and asset management of medical devices within various hospital locations in the UK & Ireland whilst ensuring outstanding customer support and building long term relationship. Responsibilities: · Perform scheduled preventive maintenance (PM) on medical equipment as per manufacturer’s guidelines. · Complete repairs as required on medical equipment as per manufacturer’s guidelines. · Complete associated admin needed to close repairs and PMs as outlined in the Standard Operating Procedures. · Update the company electronic service/maintenance reporting system. · Travel to various sites (UK & Ireland) as required to perform Corrective and Preventive Maintenance. · Maintain safe working practices within the hospital environment. · Exceed contract KPI’s to ensure customer satisfaction. · Work to maintain a high standard of customer service and protect your health and safety as well as that of your colleagues, our customers and members of the public. Promptly raise any concerns regarding potential violations of the policies. · Maintain spare part boot stock wherever necessary. Key accountabilities: · Attend customer meetings when required. · Seek opportunities to grow the business. · Review ways to improve productivity and reduce operating expenditure. Performance indicators: · Exceed contract KPI’s to ensure customer satisfaction. Capability profile Qualifications - Desirable HNC in Electrical Electronic Engineering or equivalent Qualification in Engineering, electronics or medical technologies such as biomedical engineering. or HNC in Computing or equivalent Qualification in Computing or Networking Infrastructure type qualifications Skills - Essential • Ability to follow complex instructions and processes., • Hold a clean UK Driving License, • Good organisation and communications skills. Experience - Essential • Minimum 2 years advanced computing and networking experience. and • Have customer service skills and the ability to be confident in customer facing environments., • Field service experience preferable., • Must have UK based experience Languages - Essential • Fluent in English Visa and applicability to work in the UK • Applicants should not require a VISA and must have the right to work in the UK Mobility requirements Role location - Essential - Must be willing to travel to multiple sites within the UK & Ireland Desirable - Midlands UK location International travel - Possible – Training Courses. Other Quality Assurance and Environmental and Health & Safety Comply with policies, and work to maintain a high standard of customer service and protect the safety and health of you, your colleagues, our customers and members of the public. Promptly raise any concerns regarding potential violations of the policies. DBS - Disclosure & Barring Service disclosure (formally Criminal Records Bureau disclosure) A DBS Disclosure is required for all applicants. The successful applicant must agree to an Enhanced Disclosure under the Disclosure Barring Service Records Bureau procedures. Employment will be offered to the successful applicant subject to a satisfactory Disclosure report.

Business Development Manager - Contract Electronics Manufacturing Services (EMS/CEM) Field / Remote - East UK Territory (Cambridge, Luton, Stevenage, Peterborough, Midlands, North West, North East & Scotland) £60,000 basic + car allowance + uncapped commission (OTE £100K+) + private h

KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems deployed in some of the most secure environments worldwide.Our client is a highly respected name with

There's lots of great products that customers do want to buy! Technical Sales Manager - Role and Responsibilities - Sales Engineer / Business Development Manager / BDM / Account Manager / Electronics / Engineering * Establish and maintain relationships with designated existing and prospective

Field Service Engineers – Northern West England We have opportunities in the following areas - Liverpool Manchester and the M62 corridor (Leeds, Wakefield, Bradford, Castleford). The role of Field Service Engineer is to provide product support, service, test and repair of the full range of ENVEA equipment across Customer sites in UK. The role may also require training customers in correct use and maintenance of their product and telephone support as necessary. Other duties may include feeding back knowledge and experience to support development of best practice within the Service Department. Responsibilities: • Provide service and support to your allocated cluster of sites, including all associated documentation & paperwork using company reporting/knowledge/ticketing software/database., • Travel to customer’s industrial sites to repair, commission, calibrate, service and fault find (to board level only) ENVEA products., • Provide advice to customers to help them configure systems for their applications and diagnose on site problems., • Provide customers with up to date and accurate information on products and services available, calibration services and training., • Carry out functionality and system training at both customer sites and ENVEA premises., • Ensure full and accurate data entry into customer database and timely completion of Service Reports., • Offer feedback, through the Service Area Supervisor/Service Manager, regarding equipment issues and ideas to assist future product development of features and function., • Provide feedback to the sales team to promote future business opportunities., • Communicate with the Engineering teams to ensure lessons learnt from field problems are incorporated into future product iterations. Qualifications • Degree, HND or Equivalent in Electrical and Mechanical Engineering, • Experience with Instrumentation in previous roles preferred in an Industrial environment. Experience • Experience in customer service/support and resolving problems to customer’s satisfaction., • Electronics experience, ideally with an instrumentation background., • Field service experience would be a distinct advantage., • Knowledge of Gas analysers/Particulate Emission Monitors would be a distinct advantage., • Use of IT for equipment test, and reports writing., • Use of standard test equipment. Travel is part of the core of role, and you will be required to attend customer sites across the allocated area and occasionally upon request across the UK. Some work may require overnight stays away from home, and on occasion this may be up to a week in duration. Very occasionally the opportunity to travel to international customers may be available. ENVEA is one of the world’s leading companies in environmental instrumentation, analysis, and measurement. Since its creation in 1978, ENVEA has been designing, manufacturing, and commercializing continuous measurement equipment for ambient air, industrial emissions, and software. ENVEA has always placed the preservation of the environment and sustainable innovation at the heart of the development of its measuring instruments, its strategy, and its values. Today, ENVEA has recognized expertise in its specialist fields and is present in over 100 countries.

Senior Specialty Underwriter – Warranty & Assistance (EU Markets) Remote within the EU or hybrid options depending on location About the Role We’re looking for a commercially minded underwriter with a flair for business development to help grow our EU warranty and assistance portfolio. You’ll play a key role in shaping our strategy across multiple product lines — from warranty and embedded protection to home and roadside assistance — while developing new broker and distribution relationships across the UK and EU. This is a rare opportunity to join an entrepreneurial, expanding business backed by a global insurance group. The role offers genuine autonomy, flexible working (remote from UK or Ireland), and the chance to make a measurable impact. What You’ll Do • Develop and grow an EU-facing underwriting portfolio across scalable, profitable segments., • Originate, structure, and underwrite warranty and assistance business lines including: Electrical goods and small domestic appliances Scratch, dent & alloy cover Home and roadside assistance Embedded and opt-in warranty solutions • Build and maintain strong broker, MGA, and distribution relationships across the UK and EU., • Collaborate with senior leadership on strategy, product development, and pricing., • Leverage your existing network and expertise to drive premium growth and new opportunities. About You • 5+ years’ experience in warranty, assistance, or specialty underwriting, ideally within an MGA or carrier environment., • Solid technical understanding with a proven ability to originate and underwrite profitable schemes., • Strong broker and intermediary network, with experience managing and developing accounts., • Entrepreneurial, collaborative, and comfortable working in a fast-paced, growing environment., • Equally happy negotiating a deal, refining a product, or shaping a growth plan. What’s on Offer • A pivotal role in shaping and expanding our EU warranty & assistance footprint., • Full flexibility — work remotely from anywhere in the UK or Ireland, with travel as needed., • Competitive package with strong bonus potential., • A collaborative, ambitious team culture where initiative is valued and rewarded.

Lead Protection and Control Design Engineer - Transmission and Distribution Location: Midlands (1x per month) Package: £75-£90K + car and bonus Responsibilities: • Subordinate to the Protection and Control Engineer, create Single Line Diagrams and Main Control/Protection designs., • Conceptual design of AC/DC schematics for contestable and private networks for 132/400Kv for electrical protection systems, • Developing a comprehensive secondary design that encompasses AC/DC, general arrangements, interconnection, and many block diagrams., • Creation of Core Sheets, Termination Diagrams, and Cable Schedules Essential criteria: • 5 years experience of in Secondary design, • Experience with EHV substation projects up to 132-400Kv, • Experience with UK NGET and DNO, • Skilled secondary design schemes using AutoCAD for 132Kv, 275Kv, 400Kv Desirable criteria: • Degree in Electrical & Electronics Engineering, • Direct experience working for an ICP or DNO in the UK, • Familiarity with AutoCAD electrical work If you or anyone in your network is interested, please reach out on LinkedIn or send your CV to

N.E.D. / POSSIBLE CHAIR – Semiconductors or Defence Electronics Our start-up client’s new microprocessor architecture is garnering significant interest in a number of £billion+ markets, including automotive and AUVs. They now seek a proactive NED with connections within the semiconductor industry or within defence electronics. This will evolve into a chair role for the right person, though remaining a NED will also suit our client’s exec team. Please contact Neil Dickins for additional details.

Role: Electronics Software Engineer Location: Oldham Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems de

If you’re an experienced Electronics Technician who thrives on solving problems others can’t, we’d love to hear from you! Electronics Technician - Day-to-day role: Investigating and repairing customer returns and internal hardware faults. Our client, an innovative technology comp

BASED AT THE MANCHESTER UNIVERSITY PERMANENT POSITION Salary between £32080.Flexibility essential between 9:00am and 6:00pm.JOB OVERVIEW:Equipment maintenance.Providing essential

Responsibilities: • Overseas customer training (product installation, commissioning and maintenance, etc.), customer requirement collection;, • Handle after-sales ticket of the products and close ticket, improve product quality via cusotmer feedback and ensure customer satisfaction;, • Product spare parts management, daily management of spare parts, such as delivering good parts and collecting defactive parts, etc.;, • Collect customer requirement, transfer to R&D and communicate with them to make the product more robust and friendly, and follow up on the progress of tickets;, • To identify product and technical problems remotely and then provide relevant advice and solutions;, • Ensure that technical customer service care is high quality for all local business partners and end customers;, • Document all cases, inquiries, developments, changes, and resolutions on the internal database;, • On-site visits to troubleshoot PV systems and Conduct follow-up duties with customers;, • Collaborate with Sales, Presales, Product Solutions and Product teams. Qualifications • Must have a strong working knowledge of providing technical, product, after-sales, customer service support and guidance for solar electronic, solar technology, or PV products., • a technical degree in a related field such as power, renewables, solar, photovoltaics, electrical engineering., • more than 2 years of energy storage product service experience(Local electrician's certificate is preferred)., • Experienced background in Electronics or Electrical Engineering, Grid Power, or Smart Energy Technologies., • Local language and English is a must., • Willing to learn and enthusiastic about taking on new challenges.echnical, product, after-sales, customer service support and guidance for solar electronic, solar technology, or PV products.

Looking for a challenging new role and career development as a; REGIONAL SUPPLIER DEVELOPMENT MANAGER If the answer is yes, then Future Electronics wants to hear from you! We are currently looking to employ a Supplier Development Manager to join our EMEA team in the UK. We know our employees are what make us great, that's why we constantly develop and motivate our talent with world class organizational development to learn and achieve our goals together Successful applicants will gain a highly competitive salary, full training and a range of benefits. Job Outline: The prime responsibility of the EMEA Supplier Development Manager (SDM) is to ensure the successful execution of the business plan for their assigned focus suppliers. The SDM acts as the bridge to drive successful engagement between marketing, sales, engineering and the supplier. This will require driving a demand creation strategy with NPI and marcom activities on the key technologies of their suppliers. The SDM is the primary interface and facilitator to relationships between all key personnel at the suppliers and Future Electronics. The SDM will be expected to create the business plan, ensuring alignment with sales, marketing, engineering, the supplier and drive the execution with all associated parties. The primary metrics for success will be achieving the sales, demand creation and network share metrics set within the business plan. What the role involves: • Hold principal accountability for success with assigned focus suppliers. Act as the primary lead within Future for the focus suppliers and ensure proactive alignment of distribution and market segment strategy., • Develop a business plan with associated programmes, gain mindshare and acceptance from the organisation and drive success across the EMEA organisation., • Control and communicate NPI to all relevant parties, including Sales, Marketing, Engineering and management., • Communicate supplier strengths, product offerings, roadmaps and strategies effectively across the EMEA organisation in order to target specific / strategic customers where requested., • Work with the technical and Marcom teams to develop and execute on demand creation programmes, including driving the launch and co-ordination of new product offerings. Provide enablers (demos & Marcom material) for product push programmes., • Develop business relationships to a level that will support Future gaining the ‘unfair’ advantage through supplier relationship and matrix development., • Develop tools to track and monitor performance, measure and communicate successes and drive improvements / product push programmes where needed. Do you have : • Ideally educated to degree level with comprehensive knowledge of electronics and / or electronic distribution across a region or countries., • Fully au fait with the sales and marketing working practices of Future and EMEA / international distributor., • Commercially astute with strong credibility, able to win the “customer” and develop long term customer relationship management., • Able to think strategically and implement tactical plans as required., • Strong service ethic able to work on own or as core support to others., • Proactive, adaptable, organised and multi-tasking achiever., • Excellent verbal and written communicator and presenter. About Us : Founded in 1968, Future Electronics is a worldwide leader in electronic components distribution and is recognized as one of the most respected and innovative companies in the industry today. Headquartered in Montreal and operating in over 160 locations in 40 plus countries around the world, Future Electronics has earned an impressive reputation for providing outstanding service and developing efficient, comprehensive global supply chain solutions. On April 2nd, 2024, Future Electronics joined WT Microelectronics. This complementary partnership is expected to generate strong synergies, enabling the combined company to deliver long-term, sustainable value to all stakeholders, including customers, suppliers, employees, and shareholders. Equality, Diversity, and Inclusion We are committed to Equality, Diversity, and Inclusion. We recruit the ‘best person for the job’ regardless of age, race, colour, gender, gender identity, sexual orientation, religion, or disability creating an inclusive working environment and culture for all our employees.

SYOS is a fast-growing global robotics and aerospace company, driving the development of cutting-edge uncrewed vehicles (drones) across air, land, and sea for dual-use applications. We are committed to pushing technological boundaries and delivering exceptional products that consistently exceed customer expectations. We are seeking a highly motivated and skilled Electrical System Design Engineer (UXV) to join our expanding team. You will be responsible for the design, development, and integration of robust electronic systems for vision, motion and control of our advanced unmanned aerial and surface vehicles. Responsibilities: • Design and integrate electrical architectures for fixed-wing and VTOL UXVs, • Develop wiring harnesses, power distribution networks, and EMC/EMI-compliant layouts, • Select and qualify electrical components (power supplies, converters, relays, connectors, etc.), • Collaborate with avionics, propulsion, and mechanical teams on system integration, • Conduct system-level testing, fault diagnostics, and ground/flight trials, • Document designs, test plans, and technical reports for regulatory submissions and internal QA Requirements: • Bachelor’s or Master’s degree in Electrical/Electronics Engineering or related field, • 3+ years of experience in electrical systems design, preferably in aerospace or robotics, • Proficiency in tools such as Draft sight, SolidWorks Electrical, or similar, • Strong understanding of power electronics, battery management systems, and avionics integration, • Experience with low-voltage power systems (12–48V), DC-DC converters, and grounding strategies, • Ability to produce schematics, harness drawings, and electrical BOMs Desirable requirements: • Experience with UAV systems or uncrewed platforms, • Familiarity with DO-254, DO-160, or AS9100 workflows, • Python or embedded programming exposure for test automation, • Exposure to RF/antenna layout considerations and EMI shielding, • Ensure compliance with aerospace standards (RTCA DO-160, MIL-STD-704, etc.), • Hands-on testing experience and familiarity with oscilloscope, multimeter, CAN analyzers, etc. What We Offer: • A dynamic and fast-paced environment working on state-of-the-art UxV technology., • Opportunities for career growth in a high-tech, innovative team., • Competitive salary and benefits package., • Continuous learning opportunities. How to Apply: If you are an experienced Electrical System Design Engineer (UXV) with a passion for innovation and a desire to contribute to the future of autonomous systems, we encourage you to apply. Location: This position is based in Mount Maunganui, New Zealand. Known for its stunning surf beaches, vibrant culture, and burgeoning tech scene, Mount Maunganui offers an excellent quality of life and a conducive environment for innovation. Please note: We kindly ask that recruiters and recruitment agencies do not contact us regarding this role. Thank you!

Company Overview Space Radiation Services was established three years ago and is headquartered in the UK and has a presence in the US. Our main business is engineering consulting and research for space systems, focused on radiation testing, analysis and design. We have supported over 50 companies across ten countries, ranging from sub-system/component suppliers up to satellite manufacturers and constellation providers. Our goal is to ensure our clients’ hardware survives the radiation environments of space. We do this through a mixture of analysis, desk based research, testing, and the implementation of changes to both electrical and software designs. Job Summary We are looking for the right person who can learn and contribute rather than focusing on a predefined level of experience or seniority. Thus, we offer a flexible role for a Beamline Experimentalist with focus on Radiation Effects on Electronics, from entry level to director level. The role involves supporting clients with analysis, experiment/test development, testing and design applications of electronics for space. Your key contributions will be to plan and execute irradiation campaigns, work directly at international beamlines, analyse results, and help shape how devices are tested for use in space. This is a role with autonomy, responsibility, and clear impact. You must be comfortable working independently at beamlines and making decisions during runs. • This role suits a physicist or engineer with hands-on beamline experience who wants to move into applied space work., • Applicants must be British Citizens due to work in the defence industry and to comply with export control regulations., • The role is flexible and can be part-time, full-time, or full-time with compressed hours to help with childcare etc, • Remote Work: This role is fully remote with flexibility of work hours. However, we do require the availability to work late two days per week to accommodate meeting schedules of international customers, • International Travel: Some international travel for testing purposes is required, likely to be in the range of 2 - 4 weeks per year (negotiable), • Competitive Compensation: We ensure that your compensation will be commensurate with your level of experience Responsibilities • Plan and execute irradiation tests (protons, neutrons, heavy ions etc)., • Set up devices under test and data acquisition systems., • Adjust experiments in real time based on results., • Analyse test data and write clear technical reports., • Work with customers to define test objectives and interpret results., • Maintain documentation and contribute to test methods., • Run radiation transport codes to verify test setups and evaluate hardware. Other responsibilities which can be learnt on the job: • Evaluating customer designs and components, developing approaches for improvements such as part substitutions, design changes and mitigations, • Research into the radiation effects on similar components or systems to develop an understanding of radiation effects and potential best practice, • Running on-orbit radiation simulations to predict radiation effects on hardware Experience and Skills • PhD in Physics, Materials Science, Electrical Engineering, or similar., • Hands-on experience at a beamline or accelerator facility., • Experience testing semiconductor devices or detectors preferred., • Able to make independent decisions during experiments., • Proficiency in technical writing to effectively communicate complex concepts, • Ability to manage multiple projects with competing priorities, • Independent and proactive, with an ability to learn new skills on the job, • Able to travel internationally for beamline campaigns (typically 2 - 6 days at a time). Desirable but not required: • Prior experience in the space industry, • Understanding of space qualification standards

SUMMARY: We're looking for self-motivated individuals to join our dedicated team of Service Engineers in the UK to provide the highest level of client service! The Field Service Engineer will be responsible for visiting customer sites to install, troubleshoot and maintain Cytek instruments and equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform essential duties and responsibilities satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Core responsibilities for this position include: • Installation, troubleshooting, maintenance, upgrading and repair of flow cytometers and Cytek products with proficiency in a timely manner., • Professionally managing technical needs of customers while delivering service excellence., • Maintaining a regular return visit frequency, keeping complete and accurate written and oral records of practical examinations., • Identifying customer needs and contributing to improvements in Cytek products., • Managing the daily schedule to ensure appropriate priority is placed upon urgent customer needs, while setting customer expectations for issues of less urgency., • Connecting with customers in a timely manner during business hours. Professionally communicating technical information to them via telephone technical support, service visit scheduling, product problem information gathering, fault isolation, corrective action, and site visit closure with high quality and efficiency., • Completing all business related transactions to include Field Service Reports, Instrument Qualification Reports, Parts Return Tags, etc. in a timely manner (usually within 48 hours) with high accuracy., • Managing personal service spare parts inventory to ensure accuracy on a regular basis., • Demonstrating the ability to quickly learn new technologies and develop skills in troubleshooting intra-connected complex systems., • Other duties as assigned REQUIREMENTS & QUALIFICATIONS: The requirements listed below are representative of the knowledge, skill, and/or ability required: • Bachelor's degree in Engineering, Life Sciences, and/or other technical degree, military training or experience, • 2-years experience troubleshooting and repairing Life Science equipment and/or integrated systems (software, optics, fluidics, electronics, etc.), • Work experience with the repair or service of electrical or mechanical equipment is highly preferred., • Previous experience in Flow Cytometry Repair is a plus, but not required, • Have a basic understanding of biology as it relates to flow cytometry, • Professional level English is a must – other European languages preferred., • Proficiency in Microsoft Office Suite. PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This is a full-time position, with evening and weekend work required as job duties demand, • This job entails a high volume of traveling – up to 75% of the time. Individual should be able to travel on commercial airlines, train, rental/leased car to fulfill job duties, • Individual should be able to lift 12-15kgs with ease, and be able to work in a standing position for 4 hours at a time. WHO WE ARE: At Cytek Biosciences, we are “Reimagining Cell Analysis to Fuel Scientific Discovery.” Our teams are on a mission to advance cancer and cell biology research using a powerful cell analysis technique called full spectrum flow cytometry. We are committed to providing powerful solutions that enable scientists to obtain deep biological insights rapidly and efficiently through high quality, high parametric datasets. Inclusion and diversity are core values at Cytek, and we place a high value on the unique perspectives and ideas that they foster. The Cytek team represents many diverse cultures, backgrounds and viewpoints. We seek to maintain high ethical standards and a culture that values honesty, integrity, and transparency in all that we do. We are committed to our employees and to the communities we serve worldwide. Cytek solutions are used in many of the world’s most renowned pharmaceutical, academic and research institutions. We are a growing company that is always looking for energetic, educated professionals. Expand your possibilities professionally and personally, and join our team as we satisfy long unmet needs in fields of research and medical discovery! All the information collected is needed to consider your application for a job at Cytek Biosciences. If you want to know more about how we will process your information as part of our recruitment process check our ___. Please note that our Applicant Privacy Policy is not supported for viewing on mobile devices. For optimal access, we recommend using a desktop device. Alternatively, you can contact us directly to request a copy of the Applicant Privacy Policy before proceeding with your application.

Senior Protection & Control Engineer – R&D / Product Development Department: Research & Development / Product Engineering About the Role: Join a cutting-edge R&D team driving the future of High Voltage transmission technology. As a Senior Protection & Control Engineer, you will design and develop advanced protection schemes, relay logic, and control systems that ensure the safety, reliability, and efficiency of next-generation HV substations and transmission networks. This is a unique opportunity to contribute to products that shape the power grid of tomorrow. Key Responsibilities: • Lead design and development of P&C schemes for HV substations, including relay coordination, fault analysis, and system protection studies., • Collaborate with cross-functional teams to develop new relay algorithms, control logics, and automation features., • Perform simulations and modeling for protection coordination and stability studies., • Define technical specifications and support prototype testing and commissioning in lab environments., • Evaluate emerging technologies in digital protection and substation automation for product enhancement., • Mentor junior engineers and provide technical leadership in P&C innovations. What is on Offer: • Clear career progression into Lead Engineer, Principal Engineer, or Product Architect roles., • Opportunity to publish technical papers and influence industry standards. Qualifications: • Bachelor’s or Master’s in Electrical/Electronics Engineering., • 6+ years’ experience in HV P&C engineering, preferably in R&D or product development., • Strong knowledge of IEC 61850, relay coordination, and protection relays (ABB, Siemens, GE, etc.)., • Experience in PSCAD/ETAP/DIgSILENT PowerFactory or similar simulation tools., • Excellent problem-solving, communication, and project leadership skills.

World Class Defence Organisation is currently looking to recruit 2x Senior Electronics Engineering Project Manager subcontractors on an initial 12 month contract.The role will be a hybrid of working from home and being onsite 2 days per week (flexibility on this).Please Note – this role requir

Micro-electronics Operator (Night shift) Job Description: The Micro-electronics Operator will be responsible for the assembly of Micro-electronics components in accordance with Manufacturing Instructions and drawings, certification procedures, defined workmanship standards, allocated budgets and ti

Job Description Role: Electronics Software Engineer Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems deployed in

Job Description Role: Electronics Software Engineer Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems deployed in

Job Description Role: Electronics Software Engineer Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems deployed in

BASED AT THE MANCHESTER UNIVERSITY PERMANENT POSITION Salary between £32080.Flexibility essential between 9:00am and 6:00pm.JOB OVERVIEW:Equipment maintenance.Providing essential

Job Description BASED AT THE MANCHESTER UNIVERSITY PERMANENT POSITION Salary between £32080.Flexibility essential between 9:00am and 6:00pm.JOB OVERVIEW: - Equipment maintenance.Providing essential support to both students and staff.Ensuring the smooth operation of teaching laboratories.

Job Description Role: Electronics Software Engineer Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection systems deployed in

Job Description Role: Electronics Software Engineer Location: Oldham Salary: Up to £50,000 + Benefits KO2's client, a global leader in advanced security technologies, is continuing its growth and is seeking an Electronics Software Engineer to support the development of world-class protection syst

Job Description BASED AT THE MANCHESTER UNIVERSITY PERMANENT POSITION Salary between £32080.Flexibility essential between 9:00am and 6:00pm.JOB OVERVIEW: - Equipment maintenance.Providing essential support to both students and staff.Ensuring the smooth operation of teaching laboratories.

Job Description BASED AT THE MANCHESTER UNIVERSITY PERMANENT POSITION Salary between £32080.Flexibility essential between 9:00am and 6:00pm.JOB OVERVIEW: - Equipment maintenance.Providing essential support to both students and staff.Ensuring the smooth operation of teaching laboratories.

Job Title: Customer Service Representative Agent Work From Home - Remote Panelists Part-Time Focus Group Participants - Remote Work From Home (Up To £700/Week) Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate remotely online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Customer Service Representative Agent experience is not necessary, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home remotely., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • £55-£120 (per 1 hour session) This position is perfect for anyone looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a customer service representative agent or someone just looking for a flexible part time remote work at home job, this is a great way to supplement your income.

Job Title: Administrative Assistant Work From Home - Remote Panelists Part-Time Focus Group Participants - Remote Work From Home (Up To £700/Week) Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate remotely online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Administrative Assistant experience is not necessary, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home remotely., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • £55-£120 (per 1 hour session) This position is perfect for anyone looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are an administrative assistant or someone just looking for a flexible part time remote work at home job, this is a great way to supplement your income.

Job Title: Data Entry Clerk Work From Home - Remote Panelists Part-Time Focus Group Participants - Remote Work From Home (Up To £700/Week) Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate remotely online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Data Entry Clerk experience is not necessary, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home remotely., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • £55-£120 (per 1 hour session) This position is perfect for anyone looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a data entry clerk or someone just looking for a flexible part time remote work at home job, this is a great way to supplement your income.

Job Title: Call Center Representative Agent Work From Home - Remote Panelists Part-Time Focus Group Participants - Remote Work From Home (Up To £700/Week) Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Phone Interviews. With most of our paid focus group studies, you have the option to participate remotely online or in-person. This is a great way to earn additional income from the comfort of your home. We need participants on the following topics: • Child Related (individuals with children 18 yrs or younger), • Cell Phones (Apple, Android, or Windows...Prepaid or Contract), • Entertainment (TV shows, movies, and video games), • Food (If you buy fast food, casual dining, or upscale dining), • Sports (Casual viewers and die-hard fans), • Electronics (Tell us which devices you prefer and why), • Pets (Animal lovers needed! Dogs, cats, and other pets), • Automobiles (Do you own, make payments, or lease your vehicle?), • Show up at least 10 minutes prior to discussion start time., • Participate by completing written and oral instructions., • Complete written survey provided for each panel., • MUST actually use products and/or services, if provided. Then be ready to discuss PRIOR to meeting date., • Must have either a smart phone with working camera or webcam on desktop/laptop., • Must have access to a reliable internet connection, • Desire to fully participate in one or several of the above topics, • Ability to read, understand, and follow oral and written instructions., • Call Center Representative Agent experience is not necessary, • Flexibility to take part in discussions online or in-person., • No commute needed if you choose to work from home remotely., • No minimum hours. You can do this part-time or full-time, • Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products., • You get to review and use new products or services before they are launched to the public., • £55-£120 (per 1 hour session) This position is perfect for anyone looking for temporary, part-time or full-time work. The hours are flexible and no previous experience is needed. If you are a call center representative agent or someone just looking for a flexible part time remote work at home job, this is a great way to supplement your income.

With a strong pipeline of new projects, they’re now looking for an Electronics Design Engineer who wants to work across the full product lifecycle and collaborate closely with software and mechanical teams. As an Electronics Design Engineer, you’ll be designing and developing electronic systems

This position is ideal for an Electronics Engineer, Electrical Engineer, Controls Engineer, Test Engineer, Electronics Technician, PCB Engineer, Automation Engineer, Mechatronics Engineer, or Multi-Skilled Maintenance Engineer who is ready to move from an industry role into a training and developmen

POSSIBLE CHAIR – Semiconductors or Defence Electronics. They now seek a proactive NED with connections within the semiconductor industry or within defence electronics.

Redline has a hybrid contract opportunity for a FPGA Design Engineer to join an industry leader in the design and production of innovative security technology based in Herefordshire.This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate th

Customer Quality Engineer – Electronics - Oldham.

Redline has an extraordinary opportunity for a Contract Electrical Project Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.This contract will not accept candidates operating via a PSC, therefore you will be require

Are you an experienced Electronics Engineer?. As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. HNC/HND in Electrical & Electronics Engineering.