Trabajos hardware en LutonCrear alertas

Highways Technology EngineerRoadside SystemsPermanent£40,000 + Various benefits+VanRole Overview Highways Technology EngineerThis position involves delivering installation, maintenance, and commissioning work on roadside technology used across the strategic road network. The role supports a wider engineering and project delivery team, ensuring that all systems are installed, tested, and maintained to required standards while meeting safety, environmental, and quality expectations.You will work closely with field teams and specialist contractors, supporting the coordination and delivery of tasks across multiple sites. The role reports into an Assistant Project Manager, who in turn reports to a Project Manager.Key Responsibilities Highways Technology Engineer • Promote and maintain a safe working environment for all personnel on site., • Install, commission, and maintain a range of roadside electronic and electrical equipment., • Carry out testing on hardware, software, and integrated systems., • Complete all required documentation in line with safety and quality procedures., • Assist with planning and delivering project tasks as directed by the Assistant Project Manager., • Supervise on-site teams and subcontractors to ensure productivity, compliance, and quality standards are met., • Work flexibly across the network, including occasional nights and weekends as required.Person Requirements Highways Technology Engineer, • Experience in installation or maintenance of electrical or electronic equipment (essential)., • Basic IT literacy (e.g., Word, Excel)., • ONC/HNC or equivalent qualification in Electrical/Electronic Engineering., • Understanding or previous involvement with roadside technology standards (e.g., HERS) is beneficial., • Comfortable working at the roadside and at height., • Able to travel across the region as required., • Willing to work variable shifts, including ad hoc nights and weekends., • Able to pass a basic DBS check. If you are interested in this Highways Technology Engineer vacancy, have any questions or wish to apply then please send us a copy of your CV.Utilise Recruitment

Were looking for an Electronics Design Engineer to work across hardware design and EMC/environmental testing on complex, multi-layer boards for highly regulated markets. This role could suit a mid-level/senior hardware engineer or a test engineer looking for a path into design. This Electronic Design role offers the chance to see products all the way from early requirements through to final qualifi... ZIPC1_UKTJ

Permanent Role - Hitchin based - Production and Design Engineer Pay: £37,000.00-£42,000.00 per year DOE Company Overview We are a SME manufacturing business specialising in beautiful, high-quality architectural ironmongery for a discerning client base. Our products are crafted with care, precision, and a deep respect for design, serving architects, designers, and clients who value detail and excellence. Role Overview Due to expansion and an exciting number of new projects, we have this newly created role within our existing engineering team, introduced to support business growth and enhance our design and manufacturing capability. The Production & Design Engineer will play a key role in developing design variants of existing product ranges, ensuring accurate technical documentation, and supporting the smooth flow of information and tooling into manufacturing operations. The role offers a blend of design engineering, process support, and involvement in business improvement projects, from small-scale workflow enhancements to major capital equipment investments. As such, it is ideal for a candidate seeking long-term development, broad exposure, and increasing responsibility. Key Responsibilities Design & Engineering Support: • Develop design variants and modifications to existing products using SolidWorks, • Produce and maintain accurate 3D CAD models, assemblies, and drawings, • Create and maintain manufacturing data within the MRP/ERP system (Epicor), • Generate and update BOMs, routings, tooling documentation, and configuration logic, • Support introduction of new or modified designs into manufacturing, ensuring smooth transition into production Manufacturing & Operational Support: • Collaborate with production teams to resolve technical issues, improve manufacturability, and optimise workflow, • Provide engineering input across the full process chain: presswork, CNC machining, polishing, plating, painting, and assembly, • Produce jigs, fixtures, and tooling designs as required (including potential future use of SolidCAM and Trumpf Boost) Continuous Improvement & Development Projects: • Support business improvement initiatives ranging from incremental process improvements to larger-scale capital acquisition projects, • Participate in root cause analysis, problem-solving exercises, and structured CI engagements, • Contribute to automation, workflow optimisation, tooling upgrades, and capability enhancement across the site Systems & Software: Over time, the successful candidate will gain experience in: • SolidWorks – CAD modelling and drafting, • SolidCAM – CNC interface and toolpath integration, • DriveWorks – rules based design automation, • Epicor ERP – manufacturing data, BOMs, and routings, • Trumpf Boost – programming and optimisation for sheet metal and press tooling External Engagement: • Occasional travel to suppliers and customers for technical reviews, issue resolution, design discussions, and project collaboration Qualifications - Essential: • Proven experience in a production or design role within a manufacturing environment, • Experience using SolidWorks, Inventor, or similar 3D CAD software, • Familiarity with an ERP/MRP system (Epicor preferred), • Understanding of mechanical/production engineering principles, • Ability to interpret engineering drawings and specifications, • Analytical and detail-oriented with a proactive, problem-solving mindset, • Ability to thrive in a hands-on SME environment, • Strong organisational skills with attention to detail, capable of managing multiple priorities effectively, • Excellent communication skills, both verbal and written, to liaise effectively with internal stakeholders Qualifications - Desirable: • Background in precision metalwork, product variants, or aesthetic consumer hardware, • Experience with machining, presswork, or finishing processes, • Exposure to continuous improvement tools and methodologies, • Interest in developing skills in CAM, design automation, and manufacturing optimisation Personal Attributes: • Positive attitude with a desire to grow and take on more responsibility over time, • Detail-focused, organised, and comfortable juggling multiple tasks, • Collaborative with a natural curiosity about manufacturing processes, • Motivated by producing beautiful, compliant, high-quality products What We Offer: • Competitive salary and benefits package, • A key role in a growing, design-focused manufacturing business, • A collaborative and creative working environment, • A new role with strong potential for personal and professional growth, • Opportunity to shape and enhance an internationally recognised product range, • Supportive team environment within a well established engineering department, • Training in advanced software and manufacturing systems To apply, please submit your CV to Benefits: • Company pension, • Cycle to work scheme, • Free parking, • Life insurance, • On-site parking Experience: • Epicor ERM/MRP: 1 year (required), • SolidWorks, Inventor or 3D CAD software: 1 year (required) Licence/Certification: • Right to work in the UK documentation (required) Work Location: In person, Hitchin based

Implementation Project Manager The Role We’re supporting a well-established and growing technology business, and they’re looking for an Implementation Project Manager to take ownership of delivering complex customer projects across software, hardware, integrations, and security requirements. This is a key hire within the business, focused on ensuring projects are delivered on time, on scope, and to a consistently high standard. If you thrive in structured environments, enjoy coordinating multiple stakeholders, and want real ownership over project delivery, this is an excellent opportunity. 🚀 Key Responsibilities • Own end-to-end delivery of customer projects from initiation through to completion, • Create and manage project plans, milestones, risks, dependencies, and issue resolution, • Coordinate cross-functional teams across technical, product, hardware, and third-party stakeholders, • Ensure strong project governance, reporting, and stakeholder communication throughout, • Maintain high standards across quality, security, and compliance requirements, • Identify delivery challenges and contribute to improving processes, templates, and playbooks, • Support the ongoing development and scalability of the project delivery function 🌟 What We’re Looking For • Proven experience delivering complex enterprise software and hardware implementation projects, • Strong project management skills, including planning, risk management, and stakeholder coordination, • Experience working in structured delivery environments with clear governance processes, • Ability to operate cross-functionally in fast-paced, evolving businesses, • Excellent communication skills, with the ability to engage and influence multiple stakeholders 📦 The Package • £60,000–£70,000 base salary, • Hybrid working (Luton-based), • High-autonomy role with strong visibility across the business, • Opportunity to shape and improve delivery processes within a growing organisation

Job Title: Field Application Engineer Location: UK Salary: We know salary transparency matters. While we can't list a figure on this advert, the client is genuinely flexible and open to shaping the package around the right person. Employment Type: Permanent Working Arrangement: Remote plus circa 30% travel About the Role A leading technology business is seeking a Field Application Engineer to work closely with customers, understand their technical requirements, and translate these into clear engineering specifications. You will act as the main technical contact throughout the full project lifecycle, ensuring solutions are correctly applied, integrated, and supported. Key Responsibilities • Engage with customers to understand technical and operational needs., • Translate customer requirements into detailed technical documentation., • Provide full lifecycle support from concept through integration, testing, deployment, and post‑delivery., • Assess and advise on the application of products to meet customer challenges., • Act as the primary technical liaison between customers and internal engineering teams., • Strong background in embedded systems., • Experience with VxWorks and Linux., • Proficiency in C/C++ for embedded systems/hardware, • Ability to interpret customer needs and convert them into actionable technical requirements., • Confident communicator with experience working directly with customers. JBRP1_UKTJ

Company description WHAT YOU DO AT AMD CHANGES EVERYTHING All potential candidates should read through the following details of this job with care before making an application. At AMD, our mission is to build great products that accelerate next-generation computing experiencesfrom AI and data centers, to PCs, gaming and embedded systems. Grounded in a culture of innovation and collaboration, we believe real progress comes from bold ideas, human ingenuity and a shared passion to create something extraordinary. When you join AMD, youll discover the real differentiator is our culture. We push the limits of innovation to solve the worlds most important challengesstriving for execution excellence, while being direct, humble, collaborative, and inclusive of diverse perspectives. Join us as we shape the future of AI and beyond. Together, we advance your career Job description ABOUT THE TEAM: The Networking Technology and Solution IP Group at AMD is adding to the Data Centre design team in Belfast. We focus on design and verification of ASIC blocks for next generation data center networking, focusing on the needs of AI clusters for training and inference; covering the entire design cycle across: architecture, algorithm design and modelling, block specification, RTL design, test planning, verification and end-to-end validation. We get the pleasure of seeing the results of our work in real products. We are a team who actively look for variety and complicated problems in our daily work. We encourage each other to work, over time, on all aspects of our development and to have a big picture view of our designs to better guide our block level development. Becoming a part of our local team at this stage is a hugely exciting opportunity and will enable you to play a key role in solidifying our culture and values as we grow. ABOUT YOU: For this highly visible role, the ideal candidate will be able to demonstrate success in a comparable technical role on a product team innovating and redefining high-performance computing and networking applications. Should be comfortable working in a cross-team environment and show creativity and self-motivation in their career. You are keen to make a real word difference in networking. You want to achieve the best image quality and customer experience, whilst minimising bandwidth, power and chip area. You are excited by the challenges these goals create. You are intelligent, curious, and want to get stuck into very difficult concepts. xrnqpay You are comfortable making technical decisions that have a significant impact on product families, go to market strategies and customer satisfaction and providing consultative direction with senior management to influence future business and technical direction. ABOUT THE ROLE: • Define and Develop block and system-level test benches and verification environments, • Develop support utilities for verification automation, test bench automation, regression and other verification enhancements to improve productivity and functional coverage, • Mentor verification team and provide technical support for verification activities, • Develop verification test plans, test suites and support verification activities, • Contribute to verification infrastructure development for complex ASICs, • Experience in Verilog/SystemVerilog (essential), • UVM (Universal Verification Methodology) is a must-have, experience with Formal Verification would be an advantage, • Experience in C/C++, Python, Perl, TCL for scripting and testbench development, • Experience in designing complex digital hardware systems and developing hardware architectures for algorithm implementation would be a plus, • Proficiency using ASIC and/or FPGA simulation and synthesis tools, • Familiarity with best practice chip-level verification techniques and languages, • Experience with Cache Coherency verification would be an advantage, • Experience of leveraging AI tools would be an advantage, • Familiarity with AMD products (including CPU & GPU) would be an advantageWhat we offer

Electrical Design Engineer | Bedford | £40,000 - £50,000 Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. Our client works within the special-purpose machinery space and an opportunity has arisen for an Electrical Hardware Design Engineer to join the Engineering function. The successful candidate will work as part of the Electrical Engineering and Automation team and report directly to the relevant Team Leader. The Role: +Develop both conceptual and detailed electrical designs for machinery used in industrial manufacturing environments.+Create and implement advanced control systems incorporating variable speed drives, PLCs, and industrial communication networks.+Translate technical specifications into fully realised designs, including comprehensive schematic documentation and complete bills of materials maintained within the companys ERP platform.+Ensure designs are optimised for efficient manufacture and assembly. Key Skills and Experience: +Degree, HND, or equivalent qualification in Electrical Engineering or a closely related discipline; relevant practical experience will also be considered.+Detailed experience of EPLAN+Strong understanding of core engineering principles, including the interpretation and development of electrical schematics and associated symbols.+Working knowledge of relevant industry standards, including EN 60204 and EN 13849.+Effective communication skills with a collaborative approach and a proactive team-oriented mindset. xrnqpay This is an exciting opportunity to join a forward-thinking engineering team working on innovative machinery within a dynamic industrial environment. If you are passionate about delivering high-quality electrical design solutions and want to play a key role in developing advanced automation systems, we would love to hear from you.

Highways Technology Engineer Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Roadside Systems Permanent £40,000 + Various benefits +Van Role Overview Highways Technology Engineer This position involves delivering installation, maintenance, and commissioning work on roadside technology used across the strategic road network. The role supports a wider engineering and project delivery team, ensuring that all systems are installed, tested, and maintained to required standards while meeting safety, environmental, and quality expectations. You will work closely with field teams and specialist contractors, supporting the coordination and delivery of tasks across multiple sites. The role reports into an Assistant Project Manager, who in turn reports to a Project Manager. Key Responsibilities Highways Technology Engineer • Promote and maintain a safe working environment for all personnel on site., • Install, commission, and maintain a range of roadside electronic and electrical equipment., • Carry out testing on hardware, software, and integrated systems., • Complete all required documentation in line with safety and quality procedures., • Assist with planning and delivering project tasks as directed by the Assistant Project Manager., • Supervise on-site teams and subcontractors to ensure productivity, compliance, and quality standards are met., • Experience in installation or maintenance of electrical or electronic equipment (essential)., • Basic IT literacy (e.g., Word, Excel)., • ONC/HNC or equivalent qualification in Electrical/Electronic Engineering., • Understanding or previous involvement with roadside technology standards (e.g., HERS) is beneficial., • Comfortable working at the roadside and at height., • Able to travel across the region as required., • Willing to work variable shifts, including ad hoc nights and weekends. xrnqpay

Were looking for an Electronics Design Engineer to work across hardware design and EMC/environmental testing on complex, multi-layer boards for highly regulated markets. The work spans requirements capture, schematic design, supporting PCB layout, troubleshooting EMC and environmental test issues, a

(Self-Employed, Commission Only) Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. Realistic full-time earnings of £40,000-£50,000+ per year, with uncapped potential beyond that Looking for a role where your income reflects your effort? Join SumUp as a Self-Employed Field Sales Representative and help small businesses in your area access smarter payment and POS solutions, while building serious recurring income for yourself. This Field Sales Representative role is fully field-based and face-to-face. You'll meet business owners, understand how they operate, and recommend solutions that genuinely help them run and grow their business. You don't need a background in payments. If you've worked in a customer-facing role, built rapport quickly, solved problems, and are driven to succeed, you can thrive as a Field Sales Representative here. Earning Potential Your effort directly drives your income. • Average upfront value per business: ~£500, • You earn 50% upfront commission per sign-up, • Plus 25% recurring income from each business for up to 5 years, • Around 75% of a customer's total value is paid in year one, • Meet local SMEs (cafés, salons, shops, restaurants, and more), • Build strong relationships with business owners, • Demonstrate simple, effective payment and POS solutions, • Manage your own territory and pipeline, • Turn conversations into long-term customers

JOB TITLE: Gate Automation/Service Engineer ROLE OVERVIEW for aGate Automation/Service Engineer: Gate Control Ltd is seeking an experienced Gate Automation Engineer/Service Engineer to join its service and maintenance division. This role is aligned with Door & Hardware Federation (DHF) guidance, including DHF Code of Practice for Powered Gates and Traffic Barriers, and current UK safety legislation. The successful candidate will be responsible for servicing, fault diagnosis, repair, and safety compliance of automated gate systems, barriers, bollards, and associated equipment. Knowledge of roller shutters would be advantageous. KEY RESPONSIBILITIESfor aGate Automation/Service Engineer: • Carry out planned preventative maintenance (PPM) and reactive service works in accordance with DHF guidance, manufacturer instructions, and company procedures., • Service, maintain and fault find on systems including automated gates, automatic barriers, rising and fixed bollards., • Diagnose electrical and mechanical faults safely and efficiently., • Work on systems including those manufactured by DEA, BFT, FAAC, NICE, BENINCA, and SEA., • Inspect, test, and verify safety devices., • Carry out force testing, risk assessments, and safety evaluations in line with DHF guidance and relevant British and European Standards., • Identify non-compliant or unsafe systems and report findings in accordance with company and DHF procedures., • Complete service reports, force test records, risk assessments, and job documentation accurately., • Communicate professionally with customers, site managers, and colleagues., • Ensure full compliance with Health & Safety legislation, including safe systems of work., • Participate in an out-of-hours emergency call-out rota when required., • ECS or CSCS card, • Full UK driving licence and Right to Work in the UK, • Proven experience as a gate automation/service engineer, • Ability to interpret wiring diagrams, schematics, and technical manuals, • Good understanding of gate safety principles, force limitation, and safe operation, • Background knowledge of roller shutters or industrial doors (preferred), • Strong fault finding and problem solving skills, • Willingness to complete DHF-approved training courses where required Salary:£32,000 to £36,000 (depending on experience) Hours of Work:Monday to Friday, 07:30 to 16:30 with overtime opportunities What we Offer:Company van, fuel card, tools, and uniform Holidays:20 days plus bank holidays Pension:Auto enrolment pension scheme JBRP1_UKTJ

Introduction If you think you are the right match for the following opportunity, apply after reading the complete description. Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Senior Electronics Engineer position will work in the electronics design and prototyping department, performing key electronics designs in support of larger projects and guiding of electronic engineers within the team. This role is suited to a person with extensive experience in detailed electronic design, strong knowledge of safety- and mission-critical development environments, including DO-254 compliance and controlled design documentation processes. Key Responsibilities: Technical Leadership & Design Execution: * Own and drive the electronic hardware designs for specific designs, implementing full design lifecycle from requirements capture through to production release. * Perform detailed design activities for digital, mixed-signal, Application Processor and FPGA-based, and high-reliability systems. * Provide expert review and approval of schematics, PCB layouts, component selection, and detailed design documentation. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • Strong project and programme management experience., • 5-8 years experience in electronics hardware design across digital and mixed signal systems, • Experience applying and designing to DO-254, • At least 1 year of wiring and PCB rework experience., • Significant expertise in detailed electronics hardware design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to read legislation and implement processes to ensure adherence. xrnqpay, • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience of interfacing with subcontractors, • Experience writing VHDL or Verilog, • Experience writing embedded C and Python Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Senior Electronics Engineer position will work in the electronics design and prototyping department, performing key electronics designs in support of larger projects and guiding of electronic engineers within the team. This role is suited to a person with extensive experience in detailed electronic design, strong knowledge of safety- and mission-critical development environments, including DO-254 compliance and controlled design documentation processes. Key Responsibilities: Technical Leadership & Design Execution: * Own and drive the electronic hardware designs for specific designs, implementing full design lifecycle from requirements capture through to production release. * Perform detailed design activities for digital, mixed-signal, Application Processor and FPGA-based, and high-reliability systems. * Provide expert review and approval of schematics, PCB layouts, component selection, and detailed design documentation. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • Strong project and programme management experience., • 5-8 years experience in electronics hardware design across digital and mixed signal systems, • Experience applying and designing to DO-254, • At least 1 year of wiring and PCB rework experience., • Significant expertise in detailed electronics hardware design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to read legislation and implement processes to ensure adherence., • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience of interfacing with subcontractors, • Experience writing VHDL or Verilog, • Experience writing embedded C and Python Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Role / Job Title:Solution Designer Cryptography Work Location:Manchester (2 to 3 days) Duration of Assignment:6 Month Role Description Senior design role responsible for creating high-level architecture and designing enterprise cryptographic solutions, including Hardware Security Module (HSM)-based architectures, while ensuring governance and security approvals Key Responsibilities • Develop High-Level Design (HLD) for cryptographic and security architecture, • Design and implement secure cryptographic solutions using Hardware Security Module (HSM), • Ensure solutions comply with security governance, risk, and regulatory requirements, • Collaborate with architecture and security teams to obtain design and governance approvals Key Skills / Knowledge / Experience, • High-Level Design (HLD) and security architecture documentation, • Cryptographic solution design and implementation, • Expertise in Hardware Security Module (HSM) architectures and key management, • Strong understanding of encryption standards and cryptographic protocols, • Security architecture governance and design review processes JBRP1_UKTJ

Introduction If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Saab in UK is growing rapidly, with over 600 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Electronics Manager role will assist in leading the electronics design and prototyping department, guiding overall design and a supporting management of a team of electronic engineers. This role is suited to a person with extensive experience in design management with an focus on electronic design, strong leadership capability, and knowledge of safety- and mission-critical development environments. Key Responsibilities: Leadership & Management: * Guide, manage, and develop a delivery from a team of electronic engineers (8-10 staff) across multiple programmes. * Define team objectives and performance goals aligned with business needs. * Foster a culture focused on engineering excellence, traceability, accountability, and continuous improvement. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: * Strong project and programme management experience. * 6-8 years experience in project management with a focus on hardware design across digital and mixed signal systems * Significant knowledge in detailed electronics hardware design. * Detailed understanding of the electronics manufacturing processes * Excellent attention to detail. * Process driven, ability to read legislation and implement processes to ensure adherence. * Experience managing 5+ complex projects/programmes at a time with many stakeholders. * Excellent time management/prioritisation skills * Highly organised and able to work multi projects in fast paced environment * Adaptable personality with professional approach * Good verbal and written communication skills * Excellent organisation skills * Conscientious, with a proactive work ethic Desirable: * Experience working on many projects at once and managing your time effectively. * Experience of interfacing with subcontractors. * Experience writing VHDL or Verilog. * Experience writing embedded C and Python. * Subject to UK MoD security clearance vetting to a minimum SC level. xrnqpay By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Role / Job Title:Solution Designer Cryptography Work Location:Manchester (2 to 3 days) Duration of Assignment:6 Month Role Description Senior design role responsible for creating high-level architecture and designing enterprise cryptographic solutions, including Hardware Security Module (HSM)-based architectures, while ensuring governance and security approvals Key Responsibilities • Develop High-Level Design (HLD) for cryptographic and security architecture, • Design and implement secure cryptographic solutions using Hardware Security Module (HSM), • Ensure solutions comply with security governance, risk, and regulatory requirements, • Collaborate with architecture and security teams to obtain design and governance approvals Key Skills / Knowledge / Experience, • High-Level Design (HLD) and security architecture documentation xrnqpay, • Cryptographic solution design and implementation, • Expertise in Hardware Security Module (HSM) architectures and key management, • Strong understanding of encryption standards and cryptographic protocols, • Security architecture governance and design review processes

Introduction All candidates should make sure to read the following job description and information carefully before applying. Saab in UK is growing rapidly, with over 600 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our BlueBear Business in Bedfordshire. You will be required to support a mixture of R&D and product development activities within a leading autonomy and unmanned systems company. Blue Bear continuously innovate within core areas such as UAV autopilots, mission systems, ground control stations, and all supporting systems and infrastructure. You will be keen to get involved in all development areas and have a good track history/proven track record in both problem solving and quality software development. Working as part of a team in a multidisciplinary team you will have good communication skills. A can-do attitude and a genuine passion for innovative technology will be advantageous. Development of low-level drivers for UAV for control of effectors, reading instrumentation and integration of novel sensors. Key Responsibilities: * Primarily, your role will be the design, implementation and test of real time embedded software to support both experimental activities and product development, ensuring real-time safety, security and redundancy considerations are met. * Support the firmware lead with Firmware roadmaps. * Be a key member of a skilled team in the delivery of firmware for high-paced projects. * The opportunity will enable the successful candidate to gain knowledge of cutting-edge autonomous systems. * You will be responsible for delivery, reporting and presentation of technical work and writing and submitting any necessary documentation. * Delivery and maintenance of the embedded systems software within the UAV specifically. * Support development of automated HWIL test environments. Skills/Experience * Minimum 5+ years experience of embedded Linux. * Sound understanding of Linux kernel configuration and tuning. * Experienced user of Linux OS build toolchains such as Yocto and Buildroot. * Programming languages: C, C++, Python, Scripting (including Bash). * Ability to work from application code right down to bare metal. * Experience with NXP iMX8, NXP S32K3 and larger MPSoC style application processors. * Experience of working with core communication interfaces such as UART, Ethernet, SPI, I2C, CAN, PCIe. * Experienced at firmware and hardware level debugging and fault finding (e.g. use of JTAG, examining schematics). * Able to interpret relevant data from electronic schematics and component datasheets and application notes for the purposes code writing. * Experience of Electronics design, development and testing. * Awareness of FPGAs and VHDL is beneficial. * RTOS coding and debugging. * Awareness of assurance frameworks (DO-178C etc.) and secure by design. * Conducting code reviews. xrnqpay * Familiar with use of version control tools such as Git. * Existing SC Clearance would be advantageous. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview

A leading defence and security company in Dunstable is seeking a Senior Electronics Engineer to join their BlueBear Business.This position requires extensive experience in electronics hardware design, particularly in safety-critical environments, and excellent project management skills.The successfu

A leading aerospace and defense company is seeking a Principal Technical Support Engineer to join their team in Caddington. The role involves supporting Electronic Warfare Systems and requires a strong technical background in hardware and software.

Within the IPT you will have a detailed understanding of the electronic architecture of equipment and will interface closely with other functional areas such as Systems, Mechanical, Firmware to ensure the Hardware architecture meets internal processes and controls for Leonardo through the product li

A leading aerospace and defense company is seeking a PCB Engineer in Luton to develop innovative PCB layouts for cutting-edge technology projects.You will work on multi-layer designs, collaborating with hardware engineers and ensuring compliance with industry standards.Applicants should have experie

Leonardo UK (Luton) is seeking a Principal Quality Engineer to provide independent, technical Quality Engineering support to Integrated Project Teams (IPTs) delivering complex avionics and defence electronic hardware. At Leonardo, our people are at the heart of everything we do. Leonardo is a global

A leading aerospace and defence company is seeking a Mechanical Engineer in Luton to work on cutting-edge Electronic Warfare systems.The role involves transforming conceptual designs into engineered solutions, performing mechanical design using CAD software, and collaborating closely with experts.Re

Leonardo UK (Luton) is seeking a Principal Quality Engineer to provide independent, technical Quality Engineering support to Integrated Project Teams (IPTs) delivering complex avionics and defence electronic hardware. Leonardo is a global leader in Aerospace, Defence, and Security. At Leonardo we ar

We’re looking for an Electronics Design Engineer to work across hardware design and EMC/environmental testing on complex, multi-layer boards for highly regulated markets. This role could suit a mid-level/senior hardware engineer or a test engineer looking for a path into design. This Electronic Design role offers the chance to see products all the way from early requirements through to final qualification. You’ll be working on ruggedised computing systems used in demanding environments, with plenty of variety in both design and investigation. The work spans requirements capture, schematic design, supporting PCB layout, troubleshooting EMC and environmental test issues, and producing the detailed documentation required for regulated industries. Electronics Design Engineer required skills: Electronics or hardware engineering background Some experience in board‑level design Comfortable with hands‑on testing such as EMC or environmental work Ability to fault‑find at board level Experience in analogue, digital or embedded electronicsDesirable skills of interest – Exposure to regulated sectors – aerospace, automotive, medical or similar High‑layer‑count PCB experience (18–24 layers) Video or high‑speed interfaces Knowledge of ORCAD, Mentor or similar design tools Design‑for‑EMC awareness

Technical Event Production Engineer We are recruiting for a Technical Event Production Engineer with current Tricaster Professional or Expert certification to deliver live event planning & production, remote production & filming services for a medical science client’s internal communication. The object of this role is to provide high-level media to our client in various forms, utilising a state-of-the-art broadcast studio and software editing packages. Whilst there are regular duties to be undertaken, the demands upon the function can be unpredictable, often with tight deadlines, and the individual must have proven skills in dealing with such matters. Flexibility in working hours is essential, especially when working to client deadlines, which may require shifts to extend into the evening. Playing a key part in media production in relation to the client's internal communication from pre-planning, identifying technical requirements, attending meetings in an advisory capacity, and event production and editing execution. The Technical Event Production Engineer will also play a key role in supporting a wider team of events engineers within the EMEA region and would be expected to offer support and training to the wider AV Team. Reinforcement of the AV Team’s Events Technicians forms part of the requirements for this role. Partner with the Event Innovation SME to identify, evaluate, and pilot new event features and tools that enhance the overall attendee experience. This is a full-time role, attracting a salary of £60k, which for the right candidate is negotiable. Driving will be necessary, as well as flexibility due to the demands of the clients’ events. The role is multi-faceted - primarily the operation of Tricaster events for our client, and this is where the emphasis of the role is. Candidates must be Tricaster certified and have strong experience in Tricaster operation. Based in the Luton office, operating and preparing equipment for events – there is no scope for working from home. Luton will be the home site; any travel elsewhere can be expensed, less regular commute miles. Travel and overnights all paid for with subsistence expensed. Role and Responsibilities Operation of broadcast systems (currently Tricaster) and delivering Tricaster events to a corporate client Knowledge and experience of vision mixers (Barco Event Master & BlackMagic hardware) and related event delivery Knowledge and experience of NDI Tools, hardware, and related event delivery Working alongside the client-side Technical Event Production Manager Flexibility for extended and ad-hoc events for executive and senior executive level clients Consultation on event planning Consultation on studio design Guide the end user on the best way to attain the end product based on their technical requirements. Customer Service experience to ensure the best final product Event space upkeep/maintenance Livestreaming high-profile global events Supporting hybrid style events from the studio (Integrating the studio with VC platforms (Zoom, Ms Teams, etc) Mentoring the onsite events team within the region; upskilling and knowledge transfer for the wider events team on delivering the standard we expect, including practical recommendations (e.g., optimizing Barco event delivery, playbooks, and checklists). Technical Skill Requirements Must have a strong knowledge of VizRT Tricaster Software and Hardware In-depth knowledge of Barco Event Master hardware is desirable A good understanding of vision mixers, mix effect buses, upstream keys, downstream keys, chroma keying, macros, and how they can be utilised to best achieve the event owners' desired outcome. Highly skilled in client management, event scheduling, and resource management Experienced in video recording and editing (Premiere Pro, Black Magic, AVID, Final Cut Pro) Experienced in live sound and audio recording Experienced in Live Event Streaming with knowledge of all streaming protocols, including RTMP, SRT & WebRTC Experienced in live content management Experienced in Audio & Video networking (NDI, Dante, Blu link). Experienced in Video switchers (Ross, Grassvalley, Barco, Analog Way, Extron). Experienced in projector setup, diagnostics, and maintenance. Working knowledge of video matrices, scalers (Crestron, Extron, Kramer), and HDBaseT extenders (Crestron, Extron, Kramer, Lightware). • Knowledge of DSP systems and troubleshooting (Q-SYS, BIAMP, Shure Very good knowledge of VC systems (Logitech, Poly, Cisco, Zoom, Microsoft Teams, etc) and use of AV bridges and interfaces Good IT knowledge Knowledge of lighting and related systems Education/Certifications: Preferences will be given to those applicants possessing any of the following: Tricaster Professional certification Degree or relevant experience in Broadcast Engineering, Broadcast Production, Event Production Client relations-related training/certifications. AVIXA CTS-related certifications Audio Consoles and Live Sound (Yamaha, SSL Live, DiGiCo) NLE software certifications (Adobe, AVID, Davinci, Final Cut Pro) Audio DSP-related certifications Crestron-related certifications QSC-related certifications Networking/IT-related certifications Training will be given on-site whilst onboarding

Technical Production Engineer - Tricaster Specialist Salary: £60,000 - £65,000 Location: Luton + regular travel across EMEA Contract: Full-time, onsite only Driving licence required About the Role We are seeking a highly experienced Technical Production Engineer with current Tricaster Professional or Expert certification to support a major global client in the medical science sector. This role is central to delivering high-end internal communications, live events, and production services using a state-of-the-art broadcast studio environment. This is a hands-on technical role, ideal for someone deeply proficient in Tricaster operation and passionate about delivering flawless, high-profile live productions. Key Responsibilities Lead Tricaster broadcast operations, delivering high-quality technical events for a global enterprise client. Oversee live event planning, production, and remote filming services. Operate and support vision mixers (Barco Event Master, BlackMagic, etc.). Work closely with client-side Technical Event Production Managers. Support hybrid event delivery and integrate studio productions with VC platforms (Zoom, MS Teams, etc.). Provide technical consultancy on event planning and studio design. Mentor and upskill regional events teams across EMEA. 2-3 days per week onsite in Luton, running Tricaster-based events. Regular weekly travel to Cambridge, plus frequent travel to Barcelona and Dublin for production support and team development. No option for home working - this role is entirely onsite and travel-based. Flexibility in working hours expected, including extended shifts when supporting senior-level events. Technical Requirements Must hold current Tricaster Professional or Expert certification Broad experience in: Tricaster hardware/software Vision mixers & M/E workflows NDI, Dante, AV networking Live streaming (RTMP, SRT, WebRTC) Audio mixing & live sound Video editing (Premiere Pro, Final Cut, DaVinci, AVID) Video switchers (Ross, Grass Valley, Barco, etc.) Projectors, matrices, scalers, HDBaseT DSP systems (Q-SYS, BIAMP, Shure) VC systems (Logitech, Poly, Cisco, Zoom, Teams) Qualifications Tricaster Professional Certification (required) Degree or equivalent experience in Broadcast Engineering/Production AVIXA CTS certifications Audio console training (Yamaha, SSL, DiGiCo) Adobe / AVID / DaVinci certifications Crestron, QSC, or IT/networking qualifications Why Join? Work on high-profile global events Cutting-edge broadcast studio and tools Travel across EMEA with a strong support team Opportunity to influence innovation in event technology

Technical Event Production Engineer We are recruiting for a Technical Event Production Engineer with current Tricaster Professional or Expert certification to deliver live event planning & production, remote production & filming services for a medical science clients internal communication. The object of this role is to provide high-level media to our client in various forms, utilising a state-of-the-art broadcast studio and software editing packages. Whilst there are regular duties to be undertaken, the demands upon the function can be unpredictable, often with tight deadlines, and the individual must have proven skills in dealing with such matters. Flexibility in working hours is essential, especially when working to client deadlines, which may require shifts to extend into the evening. Playing a key part in media production in relation to the client's internal communication from pre-planning, identifying technical requirements, attending meetings in an advisory capacity, and event production and editing execution. The Technical Event Production Engineer will also play a key role in supporting a wider team of events engineers within the EMEA region and would be expected to offer support and training to the wider AV Team. Reinforcement of the AV Teams Events Technicians forms part of the requirements for this role. Partner with the Event Innovation SME to identify, evaluate, and pilot new event features and tools that enhance the overall attendee experience. This is a full-time role, attracting a salary of £60k, which for the right candidate is negotiable. Driving will be necessary, as well as flexibility due to the demands of the clients events. The role is multi-faceted - primarily the operation of Tricaster events for our client, and this is where the emphasis of the role is. Candidates must be Tricaster certified and have strong experience in Tricaster operation. Based in the Luton office , operating and preparing equipment for events there is no scope for working from home. Luton will be the home site; any travel elsewhere can be expensed, less regular commute miles. Travel and overnights all paid for with subsistence expensed. Role and Responsibilities Operation of broadcast systems (currently Tricaster) and delivering Tricaster events to a corporate client Knowledge and experience of vision mixers (Barco Event Master & BlackMagic hardware) and related event delivery Knowledge and experience of NDI Tools, hardware, and related event delivery Working alongside the client-side Technical Event Production Manager Flexibility for extended and ad-hoc events for executive and senior executive level clients Consultation on event planning Consultation on studio design Guide the end user on the best way to attain the end product based on their technical requirements. Customer Service experience to ensure the best final product Event space upkeep/maintenance Livestreaming high-profile global events Supporting hybrid style events from the studio (Integrating the studio with VC platforms (Zoom, Ms Teams, etc) Mentoring the onsite events team within the region; upskilling and knowledge transfer for the wider events team on delivering the standard we expect, including practical recommendations (e.g., optimizing Barco event delivery, playbooks, and checklists). Technical Skill Requirements Must have a strong knowledge of VizRT Tricaster Software and Hardware In-depth knowledge of Barco Event Master hardware is desirable A good understanding of vision mixers, mix effect buses, upstream keys, downstream keys, chroma keying, macros, and how they can be utilised to best achieve the event owners' desired outcome. Highly skilled in client management, event scheduling, and resource management Experienced in video recording and editing (Premiere Pro, Black Magic, AVID, Final Cut Pro) Experienced in live sound and audio recording Experienced in Live Event Streaming with knowledge of all streaming protocols, including RTMP, SRT & WebRTC Experienced in live content management Experienced in Audio & Video networking (NDI, Dante, Blu link). Experienced in Video switchers (Ross, Grassvalley, Barco, Analog Way, Extron). Experienced in projector setup, diagnostics, and maintenance. Working knowledge of video matrices, scalers (Crestron, Extron, Kramer), and HDBaseT extenders (Crestron, Extron, Kramer, Lightware). Knowledge of DSP systems and troubleshooting (Q-SYS, BIAMP, Shure Very good knowledge of VC systems (Logitech, Poly, Cisco, Zoom, Microsoft Teams, etc) and use of AV bridges and interfaces Good IT knowledge Knowledge of lighting and related systems Education/Certifications: Preferences will be given to those applicants possessing any of the following: Tricaster Professional certification Degree or relevant experience in Broadcast Engineering, Broadcast Production, Event Production Client relations-related training/certifications. AVIXA CTS-related certifications Audio Consoles and Live Sound (Yamaha, SSL Live, DiGiCo) NLE software certifications (Adobe, AVID, Davinci, Final Cut Pro) Audio DSP-related certifications Crestron-related certifications QSC-related certifications Networking/IT-related certifications Training will be given on-site whilst onboarding. TPBN1_UKTJ

You'll carry out installation, maintenance, and commissioning works on a variety of Highways Roadside Technology Equipment, working with the team and specialist subcontractors. Ensure all safety, environmental, and quality obligations are met, while fulfilling the needs of clients and stakeholders. Overtime available - Variable shift pattern - Occasional weekends and nights Travel needed across the east road network Duties: * Work safely and promote a safe environment for all operations and personnel. * Carry out installation, commissioning, and maintenance activities on all equipment. * Undertake software, hardware, and systems testing. * Adhere to Health and Safety procedures and produce required documentation. * Support the Assistant Project Manager with planning and delivery of projects/tasks. * Oversee operational teams and subcontractors on site to meet productivity and quality targets. Person Spec * Basic computer skills (Word, Excel, etc.). * Background in installation or maintenance of electrical/electronic equipment. * ONC/HNC or equivalent in Electronic/Electrical Engineering. * Previous registration/knowledge of HERS. * Willingness to work roadside and at heights...

Your new company This company is a specialist managed IT service provider offering secure, compliant, and scalable technology solutions - with a strong focus on cybersecurity, cloud infrastructure, and regulated environments. Your new role Dependable 2nd Line IT Support Engineer with strong experience supporting the Windows stack, including Windows 10/11, Windows Server, Active Directory, Group Policy, and Microsoft 365 applications. Skilled in troubleshooting escalated technical issues, administering user accounts, and delivering smooth on‑site and remote support. A proactive, customer‑focused engineer able to work independently, travel to client sites when required, and ensure stable, secure, and high‑performing Windows environments. Key Responsibilities Technical Support & Troubleshooting Handle 2nd line escalations from the service desk, diagnosing and resolving complex hardware, software, and network issues. Support Microsoft 365 applications including Outlook, Teams, SharePoint, and OneDrive. Troubleshoot Windows 10/11 desktops, laptops, mobile devices, and peripherals. Resolve issues related to Active Directory accounts, permissions, group membership, and authentication. Manage printer, VPN, Wi‑Fi, and remote access support incidents.Systems & Administration Administer AD user accounts, password resets, mailbox support, and access control. Support basic Azure AD/Entra ID administration and M365 configuration tasks. Perform endpoint management via Intune, SCCM, or similar tools. Monitor system alerts and escalate to 3rd line or infrastructure teams where needed.On‑Site Support & Client Visits Attend client sites occasionally for hardware installations, troubleshooting, desk‑side support, and project delivery. Deploy new equipment (PCs, laptops, mobile devices), including imaging, configuration, and user setup. Support office moves, network patching, and on‑site incident resolution.Service Delivery & Customer Engagement Maintain high-quality customer service when interacting with end‑users and stakeholders. Provide clear and timely updates on ticket progress and resolution. Document solutions, known errors, and processes to improve team efficiency. Assist with user training or floor‑walking during system changes or rollouts.Operational Support Perform scheduled maintenance tasks, patching, updates, and checks. Support backup operations, device encryption, and security best practices. Participate in small IT projects such as system upgrades or migrations.What you'll need to succeed Windows & Desktop Support Windows 10/11 troubleshooting Basic Windows Server exposure (password resets, simple admin tasks) Active Directory (user creation, group membership, account unlocks) Basic Group Policy understanding (applying/identifying issues) Printer, VPN, and network drive troubleshootingMicrosoft 365 & Cloud Basics Microsoft 365 support (Outlook, Teams, SharePoint, OneDrive issues) Basic Exchange Online tasks (mailbox creation, permissions, shared mailboxes) Azure AD / Entra ID user and access support (password resets, MFA assistance) Assisting with M365 onboarding/offboardingDevice & Endpoint Support Laptop/desktop builds and configuration Software installs, updates, and patching BitLocker key recovery Working knowledge of endpoint protection (AV tools, Windows Defender)Tools & Troubleshooting Familiar with remote support tools (RDP, Teams, AnyDesk, etc.) Using ticketing systems (ServiceNow, Freshdesk, etc.) Documenting fixes and updating knowledge base articlesSoft Skills & Work Approach Good communication and customer‑service skills Ability to handle escalated issues with guidance Strong time management and willingness to learn Occasional travel to client sites for hands‑on support, device installs, or small project work Works well in a team and independently when requiredWhat you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)