Information systems degree jobs in BoltonCreate job alerts

Mechanical Design EngineerPermanent; full timeBury; HybridDo you have experience designing HVAC systems within building services or similar environments?Are you confident using AutoCAD, Revit MEP or similar design tools?Do you have a degree in Mechanical or Building Services Engineering or equivalent?What's in it for youSalary £50,000 to £60,000 depending on experience25 days holiday plus bank holidays; option to buy or sell up to 5 additional daysPension; 5% employee contribution and 6% employer contributionSingle private healthcareLife assurance; 4x salaryGroup income protectionHealth cash plan36.5 hour working week; early finish at 2pm on a FridayWhat will you be doing?Design HVAC systems including ductwork, piping and equipment layoutsCarry out heating and cooling load calculations using industry standard softwareSelect HVAC equipment and produce detailed technical specificationsDevelop design drawings and documentation using AutoCAD, Revit or similarEnsure compliance with building regulations, CIBSE and BS EN standardsWork closely with project managers and multidisciplinary engineering teamsAttend site for inspections, commissioning and troubleshooting when requiredSupport cost estimation and procurement activitiesIncorporate energy efficient and sustainable design principlesKeep up to date with new HVAC technologies and industry developmentsWhere will you be doing it?Established engineering business with over 150 years of heritage; specialists in HVAC and ventilation systems for safety critical environments; delivering projects across energy, defence and transport sectors; collaborative design environment working alongside experienced engineers and project teamsWhat will you need?Degree in Mechanical Engineering or Building Services Engineering or equivalentExperience in HVAC design within a building services or engineering environmentProficiency with AutoCAD, Revit MEP and BIM workflowsExperience with HVAC design tools such as Hevacomp or similarStrong understanding of thermodynamics, fluid dynamics and heat transferKnowledge of CIBSE and relevant UK building standardsAbility to carry out detailed engineering calculations and problem solvingStrong communication skills and ability to manage multiple projectsIdeally working towards or holding CEng or CIBSE membershipImportant Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

HR Advisor\nPermanent\nSalary up to £40k + car allowance\nHybrid 3 days on site (either based in Bolton or travelling across the region), 2 days working from home\n This is a regional role that will require travel across Northwest, Northeast & Midlands regions with the Head Office in Bolton\nMedlock Partners are proud to be partnering with a leading mechanical and engineering business that supports the construction industry, to recruit a Regional HR Advisor.\nReporting to the Regional HR Business Partner you will be part of a wider HR team located nationally and will cover the North Region which will cover the Northwest, Northeast & Midlands regions.\nYou will have previous advisory experience and will be confident coaching and mentoring managers on best practices. You will also lead on employee relation casework including absenteeism, work on projects and oversee daily HR operations.\nKey Responsibilities of the HR Advisor:\n· Provide advice, guidance, and support to managers on all HR matters\n· Conduct employee onboarding and plan training and development to meet organisational and individual needs.\n· Deliver administrative support across various processes and ensure accuracy and efficiency.\n· Oversee short-term sickness (STS) and long-term sickness (LTS) management across the region, ensuring absence procedures are followed and absence levels are minimised.\n· Work within strict deadlines to accurately process high volumes of confidential internal and external data.\n· Analyse numerical and statistical information to provide raw data to HRBPs.\n· Operate effectively both independently and as part of a team.\n· Maintain up-to-date knowledge of statutory and legal requirements, with a commitment to ongoing personal development.\n· Ensure records are accurate and compliant with Data Protection regulations.\n· Develop and implement HR policies, guiding staff towards compliance.\n· Assist in performance management and drive employee development plans.\n· Lead the probation process, including mid-probation reviews and proactive follow-ups.\n· Deliver HR briefings and presentations on a variety of topics.\n· Support HR projects and contribute to their successful delivery.\n· Undertake ad hoc projects as directed.\nKey requirements of the HR Advisor:\n * HR degree or equivalent CIPD Level 5 as a minimum\n * Up to date knowledge of HR best practice.\n * Proven experience as an HR Advisor or in a similar role.\n * Strong IT Skills and knowledge of HR systems and databases\n * Ability to take ownership of a task and see it through to completion\n * A proactive mindset, capable of managing multiple priorities effectively.\n * Excellent written and verbal communication skills.\nIf you are interested in this HR Advisor position and feel your experience matches the criteria, then please apply now for immediate consideration or for more information please contact Kerry Norman.\nMedlock Partners are a professional services recruitment specialist. We are proud to be an equal opportunities employer and encourage applications from candidates of all backgrounds and circumstances, including minorities and those with disabilities. Please note our advertisements use years' experience and salary levels purely as a guide. We are happy to consider applications from all candidates who are able to demonstrate the skills necessary to fulfil the role. If you do not hear from us within 48 hours please assume that your application has been unsuccessful on this occasion

Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their sole nationality. \n \nWorking: The role offers flexible & hybrid working. It would be beneficial to be on-site 2-3 days a week, depending on the project needs and working remotely other days. \n \n- \nAn opportunity exists for an Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support team in the manufacturing facility. \n -\nThe Design Support Engineer designs and develops state of the art RF and Dual Mode (RF and IR). The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. \n -\nThe Design Support Engineer is factory based and will assists with a variety of different projects. The Design Support Team interfaces with both the design team & manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies. \n- \nRole Requirements; \n\nActing as a design team representative to interface with the design and manufacturing teams to transition from the development phase into series manufacture. \n\nWork with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. \n\nSupport non-conformance management, dealing with design queries and advising on non-conformances where appropriate. \n\nSupport manufacturing with internal and external suppliers. to aid the manufacturing team & ensure continuity of supply. \n\nSupport obsolescence management by providing recommendations to the design team. \n -\nSkill and Experience; \n\nWe are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role, and a detailed knowledge of RF assembly and test procedures would be advantageous. \n\nThe successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. \n- \nDesirable Experience; \n\nExperience in the Defence or safety regulated environment would be advantageous \n\nExperience in the Naval / Maritime domain would be advantageous. \n- \nEven If you feel like you don't meet every qualification, we encourage you to reach out an apply. \n -\n \nCompany Benefits; \n\nBonus: Up to £2,500 (based on performance). \n\nPension: Up to 14% total contribution. \n\nParental Leave: Enhanced parental, maternity, and shared parental leave. \n\nFlexi Leave: Up to 15 additional days. \n\nFacilities: On-site perks like subsidised meals and free parking. \n\nTraining and Development: Excellent opportunities for career progression and skill development \n \n -\nCompany Details; \n\nThe company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! \n\nIt's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! \n\n"Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. \n\n"Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. \n\nTrue advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. \n\nEnhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. \n -\nFor full information, please get in touch

Company Description\n\nAssystem is a global leader committed to accelerating the energy transition. With 7,500 employees across 12 countries, we tackle the monumental task of switching to low-carbon energy. Our 55+ years of experience in highly regulated sectors ensure we deliver top-notch engineering, project management, and digital solutions.\n\nJob Description\n\n🚀 Join the Fusion and Modular Nuclear Business Unit! 🚀Reporting to the Turbine Island Senior Mechanical Engineer, you will be responsible for various Turbine Island design development activities. The Mechanical Engineer shall work closely with multi-disciplined teams and the supply chain to help deliver the Turbine Island design.\n\nYour mission:\n\nEnsure supplier deliverables meet requirements.\nDevelop and check design documents with Senior Engineers.\nAssist in design development activities and optioneering studies.\nApply Systems Engineering principles.\nIntegrate Turbine Island design into wider power plant infrastructure.\nEngage with stakeholders and attend design reviews.\nEnsure compliance with safety regulations and quality management.Why Join the Community of Switchers?\n\n🌟 Over 55 years in nuclear engineering.\n🏆 Ranked among the top 3 largest nuclear engineering companies.\n💼 Attractive social benefits, including an engaging Employee Committee and holiday bonuses.\n📚 Ongoing training with numerous career opportunities.\n📈 70% of our managers are promoted internally!\n🏠 Hybrid work: 1-2 days remote per week. \n\nQualifications\n\nMinimum 2:1 BEng in Mechanical Engineering or equivalent.\nRelevant senior engineering experience in sectors like offshore, renewables, nuclear, or other highly regulated industries.\nSolid background in mechanical and structural engineering.\nProficient with CAD software: Skilled in Autodesk Inventor, AutoCAD, and/or Catia.\nStrong mathematical skills: Experienced with MathCAD software.\nSkilled in producing technical reports: Expertise in creating design and substantiation reports, assembly procedures, etc.\nKnowledge of manufacturing processes: Understanding of welding, machining, etc.\nExperienced with the engineering design cycle from Concept to Manufacture.Additional Information:\n\nFamiliar with European and Offshore standards: Experience with Eurocode 3 and DNV.\nMaster’s degree is a plus.\nSkilled in checking and approving engineering CAD assemblies and drawings.\nProficient in verifying engineering documentation: Manual calculations, reports, etc.\nExcellent Finite Element Analysis skills: In-depth knowledge of ANSYS Workbench is desirable.\nExperienced in non-linear and fatigue FEA: Familiar with DNV and Eurocodes.\n\nAdditional Information\n\nDue to the nature of the work, applicants must meet UK security clearance criteria.\n\nReady to make a difference in the nuclear engineering world? Join us and be a part of the future of nuclear and fusion innovation! 🌐✨\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

Mller UK & Irelandis wholly owned by Unternehmensgruppe Theo Mller which employs over 31,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Mller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Mller UK & Ireland includes: Submit your CV and any additional required information after you have read this description by clicking on the application button. Mller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Mller Yogurt & Dessertswhich is the UK's leading yogurt manufacturer which aims to create millions more Mller moments for its consumers. It is responsible for major brands like Mller Corner, Mllerlight, Mller Bliss, Mller Rice, FRijj and Mller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Project Engineer Droitwich or Severnside Permanent Contract We are currently recruiting for a Project Engineer to join us at our Muller Milk & Ingredients business, to be based from either Severnside GL10 2DG or Droitwich WR9 0LW. A full UK drivers licence is required, due to travel and project delivery across our sites, as required. The purpose of a project Engineer within Muller is to deliver best in class engineering projects to support the goals of the business vision in alignment with the OGSM strategic plan. You will be delivering engineering projects on time, in budget to a high quality standard. As Project Engineer, the key responsibilities will include: • Play an active part in continuously improving our systems and business and support improvement activities/events within all areas, • Have awareness of Total Cost of Ownership to deliver the appropriate fit for purpose solution, • Ensure project budgets are closely controlled ensuring forecast spend is apparent at all times from concept to closure, • Coaching and mentoring of site leadership teams with overall end to end management of minor capital projects, • Management and adherence to the Muller project management process and investment process for technical investment within the Muller Group (major capitals and minor in non-manufacturing environments), • Ensure all project completion and handover documentation are submitted to the relevant site teams, • Degree level qualification in relevant STEM subject (Engineering/Physics/Maths/Science) or equivalent industry experience, • Project Management experience/qualification; within FMCG xrnqpay Environment desirable, • Use of Project Management systems (e.g. MS Project), • Ability to read and understand Engineering drawings, • Effective communication (oral / written) skills, • Ability to operate across all levels within the business, • Working within a globally recognised company that offers long term career opportunities and stability, • Competitive pay, • Company car*, • Annual bonus - up to 10%, • Free on site parking, • Supportive working environment, • Pension scheme, • 4 x life assurance & health care cover, • 33 days holiday (inclusive of bank holidays), • Access to rewards platform proving numerous discounts across various retailers #hiring Contact Details: F.A.O. UK Recruitment, Mller UK & Ireland, Shrewsbury Road, Market Drayton, Shropshire, TF9 3SQ

Description All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. The Environmental Manager is responsible for developing and supporting the implementation of environmental plans to support the environmental strategy, ensuring compliance with relevant legislation and driving continuous improvement in environmental performance. This role plays a critical part in shaping the organisations long-term environmental leadership within the utilities sector. Key Responsibilities • Develop and implement environmental strategies, policies and action plans that sup-port corporate objectives and promote continuous improvement, • Ensure full compliance with UK, EU and International environmental legislation, regulations and best practice., • Maintain up to date knowledge of emerging legislative changes, industry trends and environmental risks., • Develop, implement and continually improve Environmental Management Systems to maintain ISO14001 certification., • Coordinate initiatives for: Streetworks UK, pollution control, waste management, recycling, environmental health, conservation, biodiversity and renewable energy., • Audit, analyse and report environmental performance to senior management, regulatory bodies and external stakeholders (where required)., • Lead the preparation and publication of environmental reports, assuming overall responsibility for content and quality., • Support the business with the creation of Environmental Permits., • Conduct environmental impact assessments, risk reviews and cost analyses to identify opportunities to reduce environmental impact and financial exposure., • Liaise with regulatory authorities, local authorities, public bodies and environmental agencies., • Manage relationships with senior leaders and internal colleagues, ensuring transparency and alignment on environmental priorities., • Promote environmental awareness and sustainability across all organisational levels, fostering a culture of responsibility., • Relevant environmental or sustainability degree or equivalent professional qualification (or evidence of working towards)., • Membership of a recognised professional body (e.g., IEMA, CIWEM) (or evidence of working towards)., • 5 years experience working in Senior Environmental with demonstratable ability to provide advice on legislative change and implementing systems to meet such changes., • Strong knowledge of UK, EU and international environmental regulations and compliance frameworks., • Demonstrable experience in environmental management within a large, complex organisation, • Expertise in developing and implementing environmental management systems (e.g., ISO 14001) and integrated systems., • Competent in environmental risk assessment, impact assessments (EIA) and ecological constraints., • Proven ability to lead cross-functional improvement initiatives., • Strong analytical, auditing and reporting skills., • Excellent communication, influencing and stakeholder engagement capabilities., • Good computer skills at Microsoft Word, Excel, PowerPoint Teams Tools, • Understand Data and act upon non-compliant issues, • Able to liaise with client and customer stakeholders both internal and external, • Strong written and verbal communication and people skills, • Full driving licence Desirable, • Experience of working in utilities, waste management, infrastructure or industrial sec-tors., • Understanding of Streetworks UK Requirements and Waste Management Regulations, • Knowledge of carbon management, net zero and sustainability

Safran has been a major force in the UK aerospace and defense sector for more than 90 years, with over 5,500 employees across 14 sites supporting both civil and military programs. The company designs and manufactures mission-critical aircraft equipment-including landing gear, nacelles, flight controls, and actuation systems-and plays a key role in the UK's innovation ecosystem, partnering closely with airlines, OEMs, and the Ministry of Defence. The BDA Director for the UK & North Europe is responsible for strengthening and expanding Safran's relationships with key airlines and lessors-primarily in the UK (IAG, British Airways, Virgin Atlantic, Aer Lingus, etc.) and North Europe (Finnair, SAS, etc.). The role supports the achievement of Safran's strategic business objectives across all business units, including Aerosystems, Cabin, Seats, Landing Systems, Electronics, and Defense. Like the look of this opportunity Make sure to apply fast, as a high volume of applications is expected Scroll down to read the complete job description. This position requires a senior leader capable of driving customer engagement, identifying growth opportunities, supporting sales campaigns, and ensuring a positive and consistent Safran presence across the region. Key Responsibilities Customer Relationship & Strategic Engagement • Develop, maintain, and strengthen executive-level relationships with assigned customers., • Establish and manage a structured contact plan for regular engagement between Safran leadership and airline counterparts., • Promote a positive Safran image and ensure recurring business through consistent, high-quality customer interactions., • Support Safran's strategic growth objectives by identifying new opportunities and anticipating customer needs., • Provide accurate, timely intelligence on customer strategy, fleet data, future plans, competitive positioning, and sales opportunities., • Contribute to annual sales and marketing plans across Safran companies., • Support the closure of sales campaigns by providing insights and guidance from across the Group., • Support aftermarket activities to maintain strong customer relationships and prevent escalation., • Assist with program development for already-won campaigns and help manage issues or delays., • Organize and lead business review meetings, product previews, and demonstrations., • Represent Safran at major industry events and customer visits., • Conduct frequent virtual meetings and teleconferences with customers and internal stakeholders., • Provide timely, accurate reporting and maintain up-to-date account information., • Act on behalf of the VP BDA Europe when required. Required Qualifications & Experience • Minimum 5 years of experience engaging commercial airlines in product development or sales; interiors experience preferred., • At least 15 years of experience in civil or military aeronautics, or the broader defense sector., • Proven ability to build and maintain strong customer relationships and deliver business growth., • Excellent English communication skills (written and spoken); additional languages are an asset., • Degree in Business or Engineering; MBA preferred., • Strong digital literacy in marketing and sales tools., • Experience in high-level institutional relations abroad is a plus., • Strong adaptability to local cultures, political and industrial environments, decision-making processes, and regulations., • Contribution to business growth and Safran's positive market image., • Achievement of strategic business objectives., • High customer satisfaction and recognition as a trusted Safran representative., • Positive feedback from Branch Sales and Executive Management., • Travel requirement: up to 50%., • Reports directly to: VP BDA Europe.

The Role Find out more about this role by reading the information below, then apply to be considered. Hays is working with a leading engineering contractor delivering complex civil and infrastructure schemes. They are seeking a Geotechnical / Structural Engineer with strong drainage experience to support the design, assessment, and delivery of drainage and earthworks packages on major projects. This role will suit an engineer with a solid background in geotechnics and structural principles, combined with practical drainage design and site support experience. Key Responsibilities • Geotechnical and structural assessment to support drainage and earthworks design, • Design and checking of surface water and foul drainage systems, • Interpretation of ground investigation data and geotechnical reports, • Input into temporary and permanent works related to drainage and substructures, • Liaison with designers, site teams, and external stakeholders, • Supporting construction activities with technical advice and problem solving, • Degree qualified in Civil, Structural, or Geotechnical Engineering (or equivalent), • Proven experience in geotechnical and/or structural engineering with drainage focus, • Strong understanding of UK drainage standards and specifications, • Experience interpreting GI data and ground risk, • Familiarity with Eurocodes, BS standards, and industry guidance, • ICE or equivalent professional membership (or working towards), • Experience on infrastructure, highways, rail, or utilities projects, • Temporary works or earthworks design exposure Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be

Are you ready to take the next step in your career? Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to complex problems in water, environment, infrastructure, resource management, energy, and international development. Check you match the skill requirements for this role, as well as associated experience, then apply with your CV below. Tetra Tech is one of the largest and fastest growing environmental consultancies in the world and in 2023, the Engineering News-Record (ENR) ranked Tetra Tech #1 in Water for the 20thyear in a row. We currently have a number of positions to fill within our flood risk team due to ongoing growth with our existing client base as well as new project wins with new clients. We are seeking a Principal Engineer to support our Water Engineering team throughout the UK based ideally out ofManchester, Leeds, Chorley, Cockermouth or London offices,but other locations will be considered for the right candidate. Our team undertakes a wide variety of major and challenging infrastructure projects for the private and public sector, across a range of development sectors. We seek to provide integrated flood risk and drainage solutions incorporating state of the art design. Our current flood risk portfolio includes a broad spectrum of projects across the water sector from flood alleviation schemes (FAS) for local authorities, the MOD and private sector clients through to surface water separation schemes for water utility providers. We are embedded with a number of high-profile housing developers and support them from site inception through to masterplaining, design and construction on their flood risk challenges, including design of natural flood risk management and Sustainable Urban Drainage solutions. Our varied client and project base provides our team exciting challenges to continuingly improve their skills and knowledge across the sector. As a project leader, you will guide our teams and support our clients in the delivery of the portfolio as well as support bidding and proposition activity as we continue to grow the team. Responsibilities: We require an experienced individual of high calibre to lead projects for the Water Engineering team at Tetra Tech across a range of activities such as river, coastal and flood defence appraisal and design, hydraulic modelling and hydrology assessment, surface water management and the development of business cases. We work across a diverse range of clients delivering challenging infrastructure projects for the private and public sector. Our projects can range in size from £10k commissions up to £100m schemes covering flood risk projects for defence, transport, local government, utility, infrastructure, commercial, industrial and residential development.You will work independently and proactively on technical aspects from a projects inception, determining client briefs, to the delivery and close out of projects in accordance with best practice. You will lead projects low and medium risk projects both technically and as a project manager as well as support junior colleagues throughout the delivery of projects, including client facing and leadership roles. You will instruct, supervise and mentor junior staff in the design and management of schemes and work with clients to ensure delivery of projects to time and cost, and to help manage change. You will be supported by our senior technical leadership team throughout the delivery of your projects. We provide internal project management training as well as a structured learning and development platform including mentoring and coaching, CPD and training to ensure our staff are the best they can be to deliver excellence to our clients. We operate a hybrid working policy between your home office and working from home as required to suit your daily lives. However our projects are UK wide and some travel would be expected on occasion, including working outside normal office hours. The ideal candidate will be able to demonstrate some or all the requirements below: • Be an enthusiastic professional who likes a challenge., • Want to work in a busy and growing team and have a desire to progress their career., • Have experience in the delivery and leading flood risk and/or surface water separation projects from solution development, optioneering and design in line with the relevant guidance., • Experience in writing reports (including business cases) and presenting to internal and external partners., • Experienced in holding meetings with clients and leading design discussions., • Experienced in working across and leading multidisciplinary teams to deliver projects efficiently and effectively, such as with hydraulic modellers, engineers and environmental consultants., • Experience or an interest in developing Natural Flood Management solutions., • Experience in the Multi-coloured Manual for flood risk economic appraisal., • Have an understanding and experience in working with the NPPF., • Experience in IT systems such as ArcGIS, AutoCAD, Civils 3D and the Microsoft Office suite., • Be educated to degree level or equivalent in a relevant field and Chartered with the ICE or CIWEM, or close to achieving chartership., • Have an interest in business development and bidding., • Have excellent interpersonal and communication skills, ability to work independently, a collaborative approach and a proven ability to deliver work on time., • Have a commitment to encouraging good health and safety practices within the workplace and within design., • Be a team player displaying enthusiasm, flexibility and versatility., • Have the ability to mentor, encourage and support junior team members., • Have a desire to build uponyour existing experience,continuing your professional development with Tetra Tech., • Hold a full UK Driving License. Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website at. To apply, please submit your CV and cover letter on the Careers section of our website. We thank all applicants for their interest; however only those selected for an interview will be contacted. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We are veryhappy to discuss flexible working for this role, including the possibility of reduced hours, flexible start and finish times, or compressed hours. xrnqpay We can offer a range of solutions to help you to get the most out of your work / life balance.

Are you ready to take the next step in your career? Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to complex problems in water, environment, infrastructure, resource management, energy, and international development. Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Tetra Tech is one of the largest and fastest growing environmental consultancies in the world and in 2023, the Engineering News-Record (ENR) ranked Tetra Tech #1 in Water for the 20thyear in a row. We currently have a number of positions to fill within our flood risk team due to ongoing growth with our existing client base as well as new project wins with new clients. We are seeking a Senior Engineer to support our Water Engineering team throughout the UK based ideally out ofManchester, Leeds, Chorley, Cockermouth or London offices,but other locations will be considered for the right candidate. Our team undertakes a wide variety of major and challenging infrastructure projects for the private and public sector, across a range of development sectors. We seek to provide integrated flood risk and drainage solutions incorporating state of the art design. Our current flood risk portfolio includes a broad spectrum of projects across the water sector from flood alleviation schemes (FAS) for local authorities, the MOD and private sector clients through to surface water separation schemes for water utility providers. We are embedded with a number of high-profile housing developers and support them from site inception through to masterplaining, design and construction on their flood risk challenges, including design of natural flood risk management and Sustainable Urban Drainage solutions. Our varied client and project base provides our team exciting challenges to continuingly improve their skills and knowledge across the sector. As a project leader, you will guide our teams and support our clients in the delivery of the portfolio as well as support bidding and proposition activity as we continue to grow the team. Responsibilities: We require an experienced individual of high calibre to support on the delivery of projects for the Water Engineering team at Tetra Tech across a range of activities such as river, coastal and flood defence appraisal and design, hydraulic modelling and hydrology assessment, surface water management and the development of business cases. We work across a diverse range of clients delivering challenging infrastructure projects for the private and public sector. Our projects can range in size from £10k commissions up to £100m schemes covering flood risk projects for defence, transport, local government, utility, infrastructure, commercial, industrial and residential development.You will work independently and proactively on technical aspects from a projects inception, determining client briefs, to the delivery and close out of projects in accordance with best practice. You will support the delivery of projects both technically as well as support junior colleagues throughout the delivery of projects, including client facing roles. You will instruct, supervise and mentor junior staff in the design and management of schemes and work with clients to ensure delivery of projects to time and cost, and to help manage change. You will be supported by our senior technical leadership team throughout the delivery of your projects. We provide internal project management training as well as a structured learning and development platform including mentoring and coaching, CPD and training to ensure our staff are the best they can be to deliver excellence to our clients. We operate a hybrid working policy between your home office and working from home as required to suit your daily lives. However our projects are UK wide and some travel would be expected on occasion, including working outside normal office hours. The ideal candidate will be able to demonstrate some or all the requirements below: • Be anenthusiastic professional who likes a challenge., • Want to work in a busy and growing team and have a desire to progress their career., • Have experience in the delivery and leading flood risk and/or surface water separation projects from solution development, optioneering and design in line with the relevant guidance., • Experience in writing reports (including business cases) and presenting to internal and external partners., • Experienced in holding meetings with clients and leading design discussions., • Experienced in working across multidisciplinary teams to deliver projects efficiently and effectively, such as with hydraulic modellers, engineers and environmental consultants., • Experience or an interest in developing Natural Flood Management solutions., • Have an understanding and experience in working with the NPPF., • Experience in IT systems such as ArcGIS, AutoCAD, Civils 3D and the Microsoft Office suite., • Be educated to degree level or equivalent in a relevant field and Chartered with the ICE or CIWEM, or working towards achieving chartership., • Have excellent interpersonal and communication skills, ability to work independently, a collaborative approach and a proven ability to deliver work on time., • Have a commitment to encouraging good health and safety practices within the workplace and within design., • Be a team player displaying enthusiasm, flexibility and versatility., • Have the ability to mentor, encourage and support junior team members., • Have a desire to build upon your existing experience, continuing your professional development with Tetra Tech., • Hold a full UK Driving License Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website at. To apply, please submit your CV and cover letter on the Careers section of our website. We thank all applicants for their interest; however only those selected for an interview will be contacted. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We are veryhappy to discuss flexible working for this role, including the possibility of reduced hours, flexible start and finish times, or compressed hours. xrnqpay We can offer a range of solutions to help you to get the most out of your work / life balance.

Bolton An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. Salary: Circa £65,000 depending on experience Location: Stevenage, Bristol or Bolton Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunities Possible Relocation AvailableThe opportunity: An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. What we're looking for from you: ILS Experience essential A broad based engineering background, a degree level qualification in a numerate / technical discipline would be beneficial, with knowledge and experience of Weapon Systems support models Understanding of predictive logistics models Prioritisation and ability to deal with multiple issues on a regular basis Strategic planning of support work, from supply chain through to customer deliveryOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Are you an Electrically bias Maintenance Engineer looking for a career within the supply chain of the automotive industry? Would you like to be trained up in the maintenance of some brand new equipment and lines that is currently being installed onsite? Happy working in a clean room environment for a world renowned company? Would you like to work for a company that values it's employees and breeds an excellent culture on site that can't be matched? Is a shift pattern of working 06.00-14.00 / 14.00-22.00 / 22.00-06.00 something you'd be happy to do? Finally is Bolton an area that you can easily commute to work for a salary of Circa £46000 (DOE)? If you have answered "yes" to all the above questions then please read on and apply if interested. Suitable candidates will be called and given additional information on the company and the position. Your role will include; *Troubleshooting, repair and maintenance of high-volume PLC controlled production equipment. *Planning and performing equipment preventative maintenance. *Improvement and modification of assembly/ test equipment and transfer systems. *Service and maintenance of electrical and mechanical site services/plant. *Supporting the installation of new equipment. Ideal candidates will have the following attributes; *Ideally qualifications in Electrical Engineering to back up your experience. *Time Served Apprenticeship. *Significant experience within manufacturing. *Proven experience on Repair, Maintenance and Process Improvement. *Ideally experienced in maintenance and fault finding PLC controlled and robotic equipment. *Experience of maintaining and fault finding hydraulic and pneumatic systems. *Pro-actively identifies and suggests improvements based on findings of preventative maintenance and fault finding.. *Understanding or preventative maintenance schedules. In return the company offers a multitude of incentives and benefits, including, yearly pay increases, bonus scheme, rewards and recognition, gifts, great sports and social calendar, free drinks and parking. Location - Horwich Salary - Circa £45000 (dependant on experience) Shift - 6-2 / 2-10 / 10-6 rotating Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&K1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to £43,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of Electronics. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can also help to shape the design of the products and test equipment, delivering support to our customers What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Someone who has a record of accomplishment of on-time delivery Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions.Proven design experience in one or all of the following disciplines:- Digital & Analogue Electronics Power Electronics RF and Antenna Design Interconnects Safety Electronics RF Test and measurement principle knowledge Test SystemsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Senior Engineer (Electrical, Control & Instrumentation) Role Purpose The purpose of this role is to support the integrity and technical delivery of the organisation by acting as a central point for all Electrical, Control & Instrumentation (EC&I) design activities and related information. The role involves collaboration with multidisciplinary engineering teams and responsibility for concept and detailed design of EC&I systems, along with oversight of external suppliers and contractors. Key Objectives Ensure consistent, high-quality engineering outputs for both clients and internal production teams. Support the successful delivery of major projects within agreed timelines and budgets, escalating risks where necessary. Contribute to departmental goals and broader organisational strategy. Main Responsibilities Plan and manage engineering resources to meet project requirements, providing regular updates to project leadership. Develop both conceptual and detailed EC&I system designs across multiple projects. Review and approve engineering deliverables in line with internal quality processes. Ensure all technical documentation is complete, accurate, and properly recorded. Monitor materials and components to support uninterrupted production workflows. Provide regular progress updates to senior engineering leadership. Supervise and support team members, including performance management and workload planning. Assist in recruitment and onboarding of engineering staff and contractors. Support the resolution of non-conformance issues and raise concerns where appropriate. Provide technical support to manufacturing or installation teams as required. Deliver departmental objectives using available internal and external resources. Track and improve team performance in terms of delivery, quality, and efficiency. Maintain accurate records of project changes and associated impacts. Attend internal and external meetings with stakeholders as required. Identify and communicate project risks, delays, or cost overruns, along with mitigation strategies. Conduct performance reviews and support ongoing development of team members. Promote effective collaboration within the team and across departments. Ensure alignment with organisational values and strategic direction. Performance Standards Maintain compliance with relevant electrical engineering standards and regulations. Achieve high levels of on-time project delivery in line with business targets. Support continuous improvement in quality performance and reduction of non-conformances. Accurately capture and report project changes and associated engineering effort. Collaborate with project stakeholders to manage budgets and schedules effectively. Contribute to the successful achievement of departmental objectives. Qualifications, Knowledge, Experience and Skills Degree or equivalent qualification in Electrical Engineering or a related discipline, with relevant industry experience. Professional registration (or working towards it) with an appropriate engineering institution is desirable. Eligibility to obtain security clearance may be advantageous depending on project requirements. Experience managing engineering teams or external contractors on complex projects. Proficiency in relevant engineering design software (e.g., CAD tools). Ability to independently design compliant EC&I systems. Experience producing technical drawings, reports, and specifications. Competence in engineering calculations using both manual and software-based methods. Familiarity with control systems or PLC programming is beneficial. Strong leadership, communication, and organisational skills. Flexible approach to work to meet project demands when required

Mechanical Design Engineer Permanent; full time Bury; Hybrid Do you have experience designing HVAC systems within building services or similar environments? Are you confident using AutoCAD, Revit MEP or similar design tools? Do you have a degree in Mechanical or Building Services Engineering or equivalent? What's in it for you Salary £50,000 to £60,000 depending on experience 25 days holiday plus bank holidays; option to buy or sell up to 5 additional days Pension; 5% employee contribution and 6% employer contribution Single private healthcare Life assurance; 4x salary Group income protection Health cash plan 36.5 hour working week; early finish at 2pm on a Friday What will you be doing? Design HVAC systems including ductwork, piping and equipment layouts Carry out heating and cooling load calculations using industry standard software Select HVAC equipment and produce detailed technical specifications Develop design drawings and documentation using AutoCAD, Revit or similar Ensure compliance with building regulations, CIBSE and BS EN standards Work closely with project managers and multidisciplinary engineering teams Attend site for inspections, commissioning and troubleshooting when required Support cost estimation and procurement activities Incorporate energy efficient and sustainable design principles Keep up to date with new HVAC technologies and industry developments Where will you be doing it? Established engineering business with over 150 years of heritage; specialists in HVAC and ventilation systems for safety critical environments; delivering projects across energy, defence and transport sectors; collaborative design environment working alongside experienced engineers and project teams What will you need? Degree in Mechanical Engineering or Building Services Engineering or equivalent Experience in HVAC design within a building services or engineering environment Proficiency with AutoCAD, Revit MEP and BIM workflows Experience with HVAC design tools such as Hevacomp or similar Strong understanding of thermodynamics, fluid dynamics and heat transfer Knowledge of CIBSE and relevant UK building standards Ability to carry out detailed engineering calculations and problem solving Strong communication skills and ability to manage multiple projects Ideally working towards or holding CEng or CIBSE membership Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Bolton An opportunity has arisen for a dynamic and self-driven Environmental Advisor to join the MBDA team, the role covers the UK and can be based at any of our sites. If you are passionate about environmental issues and reducing our impact on the environment, this challenging but rewarding position may be for you! Salary: Circa £46,000 dependent on experience + bonus + benefits Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. The opportunity: The successful candidate will be providing expert guidance on environmental compliance. Ensuring that the Company SHE policies and procedures are effectively implemented while helping to develop a SHE culture of continual improvement. You will work closely with a number of departments in the business, including ESG, engineering, manufacturing, facility maintenance and security. You will have the opportunity to gain practical and professional experience in a challenging sector. What we're looking for from you: Ideally degree (or equivalent) in Environmental Science, Environmental Management, Sustainability, or related discipline. Significant experience and expertise in environmental management systems Broad understanding of manufacturing and laboratory technologies. Knowledge of environmental legislation, its application and interpretation relevant to MBDA operations. Experience in conducting internal audits for ISO 14001 Ability to influence and engage employees at all levels in the organisation. Excellent communication skills, ability to translate complex information into easily understandable formats. Flexibility to travel to our UK sites where required. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton We have an opportunity working on behalf of UK Facilities Management, the Operational Technology (OT) Risk Manager will act as the deployed local security leader and expert in all elements of security for General Infrastructure Management Systems (GIMS) policy. Salary: Circa£60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification and frequent travel to all sites across the UK Security Clearance: British Citizen or a Dual UK national with British citizenship/Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The main focus is the creation, execution and maintenance of a framework to identify and address risks associated with the devices which support MBDA's Building and Infrastructure across the UK. This will also include input into the wider group structures as and when required. The OT Risk Manager will act as the point of contact for all new, existing and legacy GIMS installations, providing advice, guidance and direction to address the multiple security risks associated with them. This includes liaising with cross business teams outside of FM, such as Cyber and InfoSec, IM and Product Cyber. The OT Risk Manager will oversee all change management activities related to the connectivity and digital interfaces of the relevant infrastructure, ensuring all change remains appropriate and complaint with policy; ensuring an evidenced position is constantly maintained by MBDA UK of continued compliance with all relevant standards which may be subject no-notice audits by MBDA Group, MOD and other customers. They will deliver technical security consultancy to the business including architecture and solution suitability to meet a complex suite of business requirements. They will create and update ISO 27001 compliant policies to specifically address the GIMS policy ensuring that all policies, processes, procedures and technical infrastructure remains compliant with MBDA UKs wider ISO 27001 ISMS as well as other certifications as appropriate. The OT Risk Manager will be a critical leader in any new infrastructure projects within MBDA UK and for reducing cyber risk to the business as part of a wider team. The OT Risk Manager will also coordinate all technical security testing within their allocated area of operations, as well as maintaining upward reporting to MBDA UK FM Director, UK Security Director and UK CISO on results and remediation progressions. They will proactively coordinate with the Principle Cyber and Information Security Advisor for all required assurance activity and evidence based reporting. They will work with FM and wider business stakeholders to create a network of Asset Owners and formally document the asset registers for their areas of operation. What we're looking for from you: CISSP, InfoSec/Cyber Degree or equivalent (Essential) Experience or relevant certifications in network security or industrial control system hardening (Essential) Knowledge of security surrounding systems enabling critical services within business (ICS/SCADA/BMS/BEMS) Comfortable with establishing and maintaining relationships with national security authorities, internal stakeholders and industry partners. Expert in security concepts for IT network architectures, applications, cloud services and hardening of operating systems within ICS and SCADA context. Ability to present risk balanced security solutions to complex problems and provide clear advice directly to key stakeholders at all levels Experience of managing and developing inexperienced IT/FM Engineers to maintain security Experience of system accreditation processes and documentation. Experience of security risk management Knowledge of business IT processes and associated approval systems Expert knowledge of modern hacking Tactics, Techniques and Procedures including impacts affecting GIMS/ICS/SCADA. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Join a new small team at MBDA Bolton and become an expert in the field of Flying Probe Manufacturing Data Analysis, developing your skills and shaping the future of circuit card manufacturing in MBDA UK. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to on-site equipment location. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a newly developed team, working to transform the way that defects are located and corrected within Circuit Card Assembly manufacturing, utilising state-of-the-art Flying Probe test equipment to find faults fast and improve the fault investigation process for the test engineering teams. We are looking for a motivated and organised individual, who can work effectively both independently or as part of a wider team. A background in Electronic Engineering, alongside attention to detail and a methodical approach to test development are essential skills for the role. Any existing knowledge of Flying Probe systems (specifically SPEA systems) is welcomed but not essential. You will work alongside experienced manufacturing test engineers and deliver new Flying Probe test packages for the circuit cards created at MBDA's complex technologies site in Bolton. Other aspects of the job involve delivering timely test package corrections and working on improvements to test time, test coverage and reliability of the Flying Probe systems. Additionally, there is also scope within the role to develop your skills as a test engineer, working with the existing test engineering teams to diagnose faults down to component level and suggest remedial actions to ensure the high quality of our products is maintained. MBDA Bolton is a friendly and inclusive manufacturing environment, with full training provided and wealth of knowledge and benefits within the business that will enable you to thrive at MBDA. Key Responsibilities: Creation of new Flying Probe test packages: Using the SPEA 4050S2 test system, you will follow a well-documented development process, starting from an initial circuit card data-pack, through the import to Flying Probe, debugging of tests and statistical data analysis of results. This concludes with a reliable and robust test package that can be deployed to the manufacturing operations team to use. Correction and improvement of existing Flying Probe test packages: As our products evolve and updates are released, we are required to update and improve the existing test packages to accommodate any changes. Another responsibility will be improving the yield on our deployed test packages, by running statistical analysis on test results and making changes accordingly. Communication with stakeholders and cross-team working: As part of investigations and cross-team working, you will perform fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc.What we're looking for from you: A Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and a Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject). OR A BEng/BSc in relevant Engineering/Technical Degree. Key Skills Expertise in Electronics Test & Diagnosis: A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Experience writing operator instructions and engineering manuals is desirable but not required. Test Equipment Experience: Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Flying Probe Systems Experience and Expertise (Desired but not required): Familiarity with Flying Probe development and debugging, including guarding methods, probe allocation and development principals.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: · Company bonus: Up to £2,500 (based on company performance and will vary year to year) · Pension: maximum total (employer and employee) contribution of up to 14% · Overtime: opportunity for paid overtime · Flexi Leave: Up to 15 additional days · Flexible working: We welcome applicants who are looking for flexible working arrangements · Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments · Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... . Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: • We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products., • Your role as an Electronics Engineer is to develop electronic solutions for cutting-edge systems. This will mainly include; Design, qualification and certification activities across the whole product lifecycle for Land, Sea, and Air platforms, • This role offers various types work, challenges, and a multitude of applications; typically this includes: reviewing requirements; generating a concept solution, schematics, and manufacturing data packs; involvement in component & COTS (commercial off-the-shelf product) selection; design, test, qualify to meet high-reliability & harsh environments; technical report writing; involvement supporting investigations and our colleagues in manufacturing. You can work in our labs and get hands-on working on bread-board demonstrators through to flight standard hardware., • This is a fantastic opportunity to shadow our more experienced Electronics Engineers & Technical Leads, learn from them and the teams around you before leading your own projects and developing to a Senior Electronics Engineer or Tech Lead., • We respect new perspectives and experiences, and we value our collaborative ways of working.We are committed to growing and supporting diversity in our workforce and ensuring everyone has equal opportunity to reach their potential. We believe that any individual with a learning mindset and belief in what we docan make a difference here. What we're looking for from you: • We are looking for proactive individuals who are motivated to develop within their Senior Electronics Engineer role;, • Candidates would be ideally degree qualified (electronics engineering, science, physics) or HND equivalent experience, have been involved in development of electronics products, and ideally, have a background in complex electronics and working in a multi-functional team (e.g. with mechanical, firmware, and software)., • You will have a sound track record in electronic design capability throughout the product life cycle, i.e. early concept through to production; be organised with an eye for detail and a sense of pride in what you deliver., • Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take steps towards senior roles and onwards. We offer a clear progression path and will give you support for career growth and development. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Depending on your state/city, additional documentation and information may be required.

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Depending on your state/city, additional documentation and information may be required.

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Depending on your state/city, additional documentation and information may be required.

Depending on your state/city, additional documentation and information may be required.

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu

Start Delivering with Uber Eats.Delivering with Uber Eats offers a flexible way of making money.It is a great alternative to traditional part-time delivery jobs or other part-time gigs, temp jobs or seasonal work.See how delivering with the Uber app can help you make money flexibly.You decide how mu