Mechanical jobs in ConsettCreate job alerts

MTrecs new career opportunity Our client are specialists in their market sector, they are looking for an experienced and detail-focused Restoration Technician to join an established team. The Role • You will work on heritage vehicles, undertaking full mechanical restoration from strip-down through to final assembly and road validation., • This is not a production environment. Every project is approached wi... ZIPC1_UKTJ

Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop Here in Consett, we have a team of around 280 colleagues. We produce a range of chilled ready meals for some of the UK's leading retailers, including Co-op, Sainsbury's and Weight Watchers. Shift: Days and Nights on a 9 Week Rota What you'll be doing • Complete fault finding, planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance, • Carry out fault finding, problem solving and establish route cause fixes to address equipment issues or plant equipment, • Maintain ongoing communications with the operations team ensuring they are fully aware of all relevant engineering activities and schedules, • Respond to internal customer needs to maximise production up time according to given priorities, • Record any stock removed from the Engineering stores to ensure accurate stock control, • Identify and recommend opportunities for improvements to promote Health and Safety and/or operational efficiency and effectiveness What we're looking for • Experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate certification, • Experience of working with maintenance engineering systems within a manufacturing environment, • Experience of a multi-skilled engineering environment, • Dual skilled in Electrical and Mechanical engineering skills At Greencore we put our people at the core. We celebrate their differences and help everyone to be themselves at work. Together we make every day taste better. If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return • Competitive salary and job-related benefits, • Holidays, • Competitive matched pension contributions, • Company share save scheme, • Greencore Qualifications, • Exclusive Greencore employee discount platform, • Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. We reserve the right to close this advertisement before the stated closing date.

Do you have a genuine passion for classic sports cars and a desire to work at the very highest level of craftsmanship within the automotive world? Aston Workshop is one of the UK’s leading specialists in the sales, servicing, and restoration of heritage Aston Martin motor cars. From the earliest post-war models through to the iconic DB4, DB5 and V8 era, we work on some of the most significant and valuable cars ever produced. Based in a purpose-built 45,000 sq ft facility in the Beamish countryside, our team of over 40 skilled specialists carry out full ground-up restorations, precision engineering, and bespoke builds to standards recognised throughout the industry. This is not a production environment. Every project is approached with care, accuracy, and an emphasis on quality over volume. Opportunities to join the team are rare and reserved for individuals who take genuine pride in their work and value craftsmanship over simply getting the job done We are now looking for an experienced and detail-focused Restoration Technician to join our established team. The Role You will work on heritage vehicles including Aston Martin DB4, Aston Martin DB5, Aston Martin DB6, Aston Martin DBS, Aston Martin V8 and pre-war Lagonda models, undertaking full mechanical restoration from strip-down through to final assembly and road validation. Responsibilities include: • Complete mechanical strip, rebuild, and reassembly of classic vehicles, • Diagnosis and rectification of mechanical faults, • Build up of vehicles from bare painted body, • Road testing and quality verification, • Maintaining a clean, organised, and safe working environment, • Upholding the high standards expected of Aston Workshop builds About You • Significant experience within classic car restoration or a high-end automotive environment, • Strong mechanical background with relevant qualifications, • A meticulous approach with a focus on detail, finish, and longevity, • A genuine interest in heritage vehicles and engineering, • Demonstrable skill in traditional, hand-built craftsmanship, with an eye for detail expected in concours-level restoration work The Opportunity This role offers the chance to work on some of the most iconic cars in automotive history, within a business that values craftsmanship, engineering excellence, and continuous development. Located within the Red Row Estate in Beamish, alongside the renowned The Black Horse Beamish, our facility provides a relaxed yet highly professional working environment. Working hours are Monday to Friday, 40 hours per week. Salary is competitive and dependent on experience. For an informal discussion, please apply only through Indeed. Job Types: Full-time, Permanent Benefits: • On-site parking Experience: • Classic Car: 5 years (required) Work Location: In person

Classic Car Restorer Location: Beamish - County Durham, England Salary: £30,000 £40,000 per annum (dependent on experience) Salary & Benefits £30,000 £40,000 per annum (dependent on experience) 28 days holiday including bank holidays Private pension scheme On-site parking Company-provided uniform The Role The organisation is seeking an experienced and detail-focused Restoration Technician to join their established team. The successful candidate will be responsible for working on heritage vehicles including Aston Martin DB4, DB5, DB6, DBS, V8, and pre-war Lagonda models. The role involves full mechanical restoration processes from initial strip-down through to final assembly and road testing. Key Responsibilities: Complete mechanical strip-down, rebuild, and reassembly of classic vehicles Diagnosis and rectification of mechanical and engineering faults Build-up of vehicles from bare painted body Road testing and final quality verification Maintaining a clean, safe, and organised working environment Ensuring all work meets the high standards expected in concours-level restorations Upholding the craftsmanship and quality reputation of the business The ideal candidate will demonstrate: Significant experience within classic car restoration or a premium automotive environment A solid amount of experience working with classic vehicles (essential) A strong mechanical background with relevant qualifications A meticulous and detail-driven approach to workmanship A genuine passion for heritage and performance vehicles Strong ability in traditional, hands-on mechanical craftsmanship Working Hours Monday to Friday 8:00am 4:30pm No weekend working 40 hours per week Additional Information The role is based at a specialist automotive restoration facility in Beamish within the Red Row Estate. The working environment is professional yet relaxed, supporting highly skilled technicians in delivering exceptional restoration work. This opportunity offers the chance to work on some of the most iconic vehicles in automotive history within a business recognised for engineering excellence and craftsmanship. TPBN1_UKTJ

MTrec’s new career opportunity Our client are specialists in their market sector; they are now looking to recruit a Project Engineer on a permanent basis. The Job you’ll do This role requires an experienced engineer with extensive knowledge of rotating equipment, who will support the Engineering Manager in producing reports such as inspection reports, repair plans and rebuild reports. Working closely with the service department and the Engineering Manager, you will advise on best manufacturing practices for restorative projects and produce and distribute bill of materials (BOMS). The Project Engineer will work with most departments from start to end of jobs and will therefore have a good understanding of the operational process. Managing multi-disciplinary teams is a key part of this role therefore strong management skills are essential. Produce Bills of Material (BOMS) for different processes to assist service department and to establish cost. Create report of required repairs of rotating equipment Produce relevant documentation crucial to each job such as inspection reports, rebuild reports and repair plans for internal departments and customers Ensuring all parts are available on time for workshop – liaising with various departments and suppliers Working with the Quality Department to verify that all tasks and related documentation meet regulatory requirements, customer standards, and reflect best practices. Manage a multi-disciplinary team Support the Engineering Manager with any other tasks when required. About You Mechanical Engineer, either time-served or degree-qualified is essential Experience in rotating equipment is essential. Proficient in the use of Microsoft software and using an ERP system. An understanding of pump systems and testing methodologies. Knowledge of reverse and mechanical engineering processes Minimum of five years' experience in team management. The Rewards and the Benefits Competitive salary. 37 Hours per wee with an early finish on Friday. Company Pension Scheme. Cycle to Work Scheme. Radius Allowance payable based on commute to work miles

Job Title: CNC Machinist (Setting and Operating) Location: Stanley Hourly Rate: £15.85 per hour + 30% shift allowance for nights Shifts: Dayshift / Nightshift – 2 week rotation Benefits: • Workplace pension scheme, • Comprehensive training provided, • Career development opportunities, • Supportive and safety-driven work culture The Company: Theo James Recruitment is proud to be supporting Dyer Engineering in their search for a CNC Machinist. At Dyer Engineering, they pride themselves on being at the forefront of manufacturing excellence. With a commitment to innovation and quality, they have established themselves as a leading player in the industry. As a key member of their team, you will contribute to their legacy of producing innovative and highly sought-after products while working in a dynamic and supportive environment. Progression opportunities are in abundance with Dyer Engineering, due to their impressive growth plans, both currently and for the future. If you are someone who wants to work in a company that will advance your career and treat you as more than a number – please read on. Job Description: We are looking for an experienced CNC Machinist (Setting and Operating) to set up, operate, and maintain CNC machinery in a fast-paced production environment. You will play a key role in delivering high-quality components to specification, working within a safety-conscious and quality-driven team. This is a hands-on role, ideal for someone with a strong mechanical aptitude and previous experience with FANUC CNC systems. As a CNC Machinist (Setting and Operating), you will: • Set up FANUC CNC machines, including loading tools, fixtures, and programs, • Operate machines to produce components to tight tolerances, • Perform routine maintenance and tooling changes, • Monitor production and carry out in-process inspections, • Troubleshoot basic equipment or programming issues, • Ensure compliance with safety policies and company procedures, • Support wider machining tasks such as drilling, tapping, and bandsaw operations when required Skills & Experience: To be successful in this CNC Machinist (Setting and Operating) role, you should demonstrate: • Prior experience setting and operating FANUC-controlled CNC machines, • Ability to read and interpret technical drawings and work instructions, • Familiarity with quality control and precision measuring instruments, • A hands-on, problem-solving approach and a positive attitude, • Good communication skills and the ability to work both independently and in a team, • Willingness to work overtime and adapt to a rotating shift schedule, • A commitment to workplace safety and continuous improvement Why Should You Apply? • Be part of a high-performing team with a strong safety-first culture, • Gain exposure to advanced manufacturing technologies, • Enjoy the stability and backing of an established engineering business, • Excellent opportunity to grow your career within the machining department, • Your contributions as a CNC Machinist (Setting and Operating) will directly impact productivity and product quality

We are recruiting experienced and reliable Farm Operatives to support day‑to‑day poultry operations for a respected client within the agricultural sector. This role is hands-on, autonomous, and vital to maintaining high bird‑welfare and production standards. Key Responsibilities Daily Duties • Manage building security and key control, • Follow strict biosecurity, PPE, and food hygiene procedures, • Carry out daily flock management for a ~32,000-bird flock with minimal disturbance, • Inspect flock at least three times a day, monitoring bird health and welfare, • Check feed tracks, water drinkers, and automated shed monitoring systems, • Maintain accurate records (temperature, feed, water, egg counts, inspections) and analyse data to identify issues, • Collect stray/floor eggs and support ventilation monitoring, • Handle birds and remove deceased birds in line with animal‑welfare policy, • Operate, monitor, and maintain poultry‑house machinery (e.g., egg belts), • Clean spillages and complete end‑of‑day shed cleaning, • Pack and stack daily egg collections following quality standards, • Move packed eggs to storage with correct documentation, • Unload and organise packaging (2–3 times per week), • Ensure building is properly secured before leaving, • Complete any additional general farm duties as required Weekly Duties • Complete weekly records, analyse performance, and report issues, • Liaise with external muck‑removal contractors, monitor muck-belts, report mechanical faults, and clean spillages, • Complete additional biosecurity cleaning tasks (foot dips, disinfecting points, etc.), • Manage shed rodent stations, including poison checks, replacements, record‑keeping, and data analysis As Required • Replace flock enrichment items, • Weigh birds according to flock schedule, • Administer vaccinations/medication under direction of Production Manager, • Lay down litter/bedding and maintain dry areas, • Assist with housing new flocks, • Carry out routine house cleaning and manure removal, • Clean and maintain machinery used within poultry housing Full in-house training will be provided

MTrecs new career opportunity Our client are specialists in their market sector; they are now looking to recruit a Project Engineer on a permanent basis. The Job youll do This role requires an experienced engineer with extensive knowledge of rotating equipment, who will support the Engineering Manager in producing reports such as inspection reports, repair plans and rebuild reports. Working closely with the service department and the Engineering Manager, you will advise on best manufacturing practices for restorative projects and produce and distribute bill of materials (BOMS). The Project Engineer will work with most departments from start to end of jobs and will therefore have a good understanding of the operational process. Managing multi-disciplinary teams is a key part of this role therefore strong management skills are essential. Produce Bills of Material (BOMS) for different processes to assist service department and to establish cost. Create report of required repairs of rotating equipment Produce relevant documentation crucial to each job such as inspection reports, rebuild reports and repair plans for internal departments and customers Ensuring all parts are available on time for workshop liaising with various departments and suppliers Working with the Quality Department to verify that all tasks and related documentation meet regulatory requirements, customer standards, and reflect best practices. Manage a multi-disciplinary team Support the Engineering Manager with any other tasks when required. About You Mechanical Engineer, either time-served or degree-qualified is essential Experience in rotating equipment is essential. Proficient in the use of Microsoft software and using an ERP system. An understanding of pump systems and testing methodologies. Knowledge of reverse and mechanical engineering processes Minimum of five years' experience in team management. The Rewards and the Benefits Competitive salary. 37 Hours per wee with an early finish on Friday. Company Pension Scheme. Cycle to Work Scheme. Radius Allowance payable based on commute to work miles. TPBN1_UKTJ

What We're Looking For: Essential Experience & Qualifications: NVQ Level 2 Plant Maintenance NVQ Level 2 Engineering Experience in mechanical maintenance, fault finding, and repairs Ability to diagnose and resolve mechanical, hydraulic, and electrical faults Ability to work independently and as part

Building Services Design Engineer (Mechanical) £50,000 - £60,000 + Bonus + Private Healthcare + Flexitime + 25 Days Holiday + EOT Newcastle Are you a Building Services Design Engineer from a mechanical background, looking for a highly autonomous and rewarding role, recognised as the go-to speciali

Oversee high-and critical-risk mechanical and electrical operations, maintenance, and energy management programmes. The M&E Regional Lead in an on-site role, responsible for ensuring all electrical and mechanical works within Pulsant's Central region data centres are delivered safely, compliantly an

On offer is a job at a well-established, multi-disciplinary company, that works across a wide range of projects within the mechanical demolition sector. Mechanical Fitter (Heavy Plant Equipment).

The ideal candidate will come from a mechanical background and have varied experience within the industry and is ambitious looking for progression. A well known and highly successful M&E Contractor are looking for a Mechanical ContractsManager to join their Project Delivery team.

A Leicestershire-based specialist serving the quarry and construction industry is looking to expand its engineering team by recruiting experienced Mechanical Fitters. To apply for the Mechanical Fitter position, click Apply Now and upload your CV.

Mechanical, Technician, Electrical, Water, Waste, Pumping, Renewable, Pump, Engineer, Pumps, Motors, Maintenance, Engineering, Electrical, Field, Service, Mobile , Bristol, Bath, Weston-Super-Mare, Gloucester, Swindon. Mechanical Pump Engineer (Field Based). Are you a Mechanical Pump Engineer lookin

Quest Global is an organisation at the forefront of innovation and one of the worlds fastest growing engineering services firms with deep domain knowledge and recognised expertise in the top OEMs across seven industries.We are a twenty-five-year-old company on a journey to becoming a centenary one,

Assistant Mechanical Estimator | M&E Building Services | South Coast | £40,000£55,000 + Package This role offers the opportunity to join a respected M&E Building Services contractor and develop your career within a supportive pre-construction environment.

Mechanical Design Engineer Building Services 5 Years Experience / Associate / Intermediate Role Salary - £60k to £70k Following 12 months of continuous employment, you are entitled to become a beneficiary of the Employee-Owned Trust (EOT) scheme.

Service Engineer (Mechanical) £35,000 - £40,000 + Company Vehicle + Training + Progression + Flexitime + Travel Brixton Are you a Service Engineer from a mechanical background looking to cover a local patch in a provided van, available for private use, for a stable market leading company, offering

BakerHicks is seeking a Senior Mechanical Building Services Engineer in London to manage Mechanical Services for small to medium-size projects.

Proven experience in mechanical maintenance within residential, hotel, or building services environments. Relevant mechanical qualifications (NVQ, City & Guilds, or equivalent). Mechanical Maintenance Engineer.

Ideal candidates will have a degree in Mechanical or Nuclear Engineering and familiarity with ASME standards, alongside leadership experience in complex environments. ASSYSTEM is looking for a Mechanical Contract Engineering Lead to manage contracts in the nuclear sector.

Broughton Group is seeking an experienced Electro Mechanical Technician in Ashford, United Kingdom. This long-term contract role involves building mechanical and electrical assemblies and troubleshooting issues.

Mechanical Design EngineerApplylocations: Newcastle - Grey Streettime type: Full timeposted on: Posted 6 Days Agojob requisition id: R0006544## *The role:*We have an exciting opportunity to work within an experienced and multi-disciplined team delivering engineering designs for the Offsh

As Mechanical Gas Manager, you’ll lead all mechanical operations with a focus on boiler installations, gas compliance, surveys, and plumbing across our hospitality client portfolio. Maintenance Manager – Mechanical – Hospitality Facilities Specialist. Lead and manage all mechanical & gas-relat

Our highly successful niche sector client based in Derby offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they

We are currently recruiting for Mechanical / Pipe Fitters.

SAAB in the UK is looking for a leader in mechanical engineering to oversee complex aerospace systems development. The ideal candidate will have over 10 years of experience in the aerospace or defence sector, along with a degree in Mechanical or Aerospace Engineering.

You will play a key role in the mechanical design and delivery of projects in the UK and internationally, working closely with other disciplines including Architecture, Structures, Civils, Electrical and Sustainability, as well as directly with clients, to develop innovative and practical design sol

Senior Mechanical Design Engineer (Permanent) - Tyne & Wear (Hybrid). Senior Mechanical Design Engineer. Own mechanical design for rotating equipment and drivetrain-style assemblies (plus associated components as needed).

Assystem GmbH is seeking a pivotal leader for the Cooling Water Island engineering team within their Fusion and Modular Nuclear Business Unit.This role drives the design, integration, and execution of essential cooling water systems for a Small Modular Reactor (SMR) program.Responsibilities include

This role involves managing a team, ensuring project delivery in client relations, and applying your expertise in mechanical building services. A leading engineering consultancy in the UK is seeking a Principal Mechanical Engineer to lead prestigious projects in building services.

Candidates should have a BEng (2:1 or higher) in Mechanical Engineering, proven mechanical engineering experience, and strong knowledge of design principles. ASSYSTEM is seeking a skilled Principal or Senior Mechanical Engineer to deliver innovative solutions in a regulated industry.

Coordinate the Mechanical engineering effort for the Equipment, Containment and Piping works being completed by those Mechanical Engineers. The Mechanical Engineer (B&S) will be a proactive and driven individual who will support the Engineering Managers via the B&S Project Engineer as the Mechanical

A recognised apprenticeship in Mechanical/Electrical engineering or an NVQ/Level 3 Mechanical/Electrical qualification with the relevant fitting experience is required. You'll become a key member of the London Central team, we are looking for a Mechanical/Electrical industrial skilled individual liv

Rullion Engineering Cumbria is looking for a Mechanical Engineer for a permanent position based in Warrington or Abingdon. Candidates should have a degree in Mechanical Engineering and over 5 years' experience, preferably within regulated environments like the nuclear industry.

Join a prestigious company as a Mechanical Maintenance Engineer, where you'll ensure the smooth operation of mechanical systems in a high-profile building. This role offers the chance to showcase your expertise in mechanical maintenance while building strong client relationships.

Cure Talent is seeking a Mechanical Design Engineer for a leading manufacturer in Leicestershire. This role involves delivering mechanical design expertise throughout the project lifecycle, designing packaging machinery and automation equipment.

The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Mechanical Supervisor Hillingdon Contract. Step Solutions are supporting a leading M&E Contrac

Principal Mechanical Engineer for its Technical Services & Consulting department.

BSI is seeking a Mechanical Test Engineer in Hemel Hempstead. This full-time position involves conducting mechanical testing across various products for safety and efficiency. Qualified candidates should hold an HNC/HND in Mechanical Engineering or equivalent experience.

Senior Engineering Draughtsperson / Mechanical Design Draughtsperson. A leading organisation within the Defence & Security sector is looking for an experienced Senior Engineering Draughtsperson to support the development of 2D and 3D mechanical definitions for complex products. Ideally Degree, HND,

ALSTOM Gruppe in the East Midlands is seeking an Electrical and Mechanical Design Leader responsible for managing mechanical and electrical design deliveries on projects. Candidates should have strong mechanical 3D CAD experience and knowledge in electronic and mechanical engineering.

The Mechanical Design Engineer role would be suited to mechanical design engineers from sheet metal, stainless steel and / or agricultural product design backgrounds. The Mechanical Design Engineer:. Mechanical Design Engineer required for a company that works in several different market sectors inc

A leading engineering organisation in Surrey is seeking a Senior Mechanical Design Engineer to take ownership of complex mechanical systems from concept through to production. Senior Mechanical Design Engineer – Actuator/Hydraulics. Lead the mechanical design of assemblies and components involving

Are you a skilled Mechanical & Electrical (M&E) Engineer in or around the North London area, looking for an exciting opportunity in the facilities management sector? We are seeking a dedicated professional to carry out planned and reactive maintenance across a defined portfolio, ensuring top-quality

Arconic is seeking a Maintenance Mechanical Craftsperson to join our Kitts Green team in Birmingham.