National security jobs in WolverhamptonCreate job alerts

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. Opportunities in the West Midlands: Bournville Coventry Solihull Stoke Wolves/Dudley A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need Either: NVQ Level 2 qualification in Light Vehicle Maintenance (or equivalent) with 2+ years’ experience or 5+ years’ experience as a Vehicle Technician/Mechanic and A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔ Independence in a mobile role ✔ The stability and support of a trusted national organisation ✔ Ongoing development, including future EV and diagnostic skills ✔ A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Product EngineerReporting To:Engineer Sr., ProductWork Schedule:Hybrid – Wolverhampton, GBRAs a Product Engineer, you will report to the Senior Product Engineer (Global Sustainment or Original Equipment) and provide engineering support across assigned product lines at Wolverhampton. Due to the continued growth of our operations, this role offers the opportunity to work on increasingly complex products that require technical guidance and innovative solutions. You will collaborate closely with other Product Engineering team members and work independently when required. The role may also involve leading special projects. You will support workshop technicians with technical queries, perform engineering investigations, prepare repair and assembly documentation, and contribute to product improvement initiatives that influence overall product performance, cost, and reliability. You may also engage in customer- or supplier-facing activities, such as during engineering investigations or product validation. The ideal candidate will be an enthusiastic problem solver, capable of coordinating activities across multiple departments. Your work will have a direct impact on product quality, turn-around times, and cost efficiency.Key ResponsibilitiesWorking under the direction of the Senior Product Engineer, your responsibilities will include:• Generate and maintain repair and assembly work instructions• Specify, implement, and validate product rework methods• Promote a culture of compliance with procedures to maintain product integrity, collaborating with Design Engineering, Manufacturing, Quality, Programs, Test Equipment, EHS, and Supply Chain to resolve issues• Lead and implement process improvements aligned with business objectives• Support the introduction of new product lines and repairs (OE and GS)• Design, improve, and organize repair and assembly tooling to meet requirements• Review test equipment and propose improvements• Review and assist in the proofing of technical publications• Coordinate and conduct engineering investigations• Produce technical reports and documentation• Raise and monitor non-conformance reports (NCs)• Track and improve First Pass Yield (FPY) to enhance performance• Facilitate design changes through drawing redlining and initiating ECN processes• Troubleshoot and resolve technical issues in repair, assembly, and test areasKey Skills & Expertise• Degree in a relevant engineering discipline or equivalent experience in aerospace or a similarly complex industry• Strong understanding of hydraulic and mechanical actuation, with ability to diagnose faults and specify rework• Ability to identify producibility and quality improvements in assembly, test, and product design• Capacity to make engineering judgments and produce technical justifications• Ability to work directly from engineering drawings, CMM data, service bulletins, process specifications, and test procedures• Proficiency in Microsoft Office and general computer literacy• Experience in aerospace maintenance or OE production environments is preferred• Strong written and verbal communication skills• Experience coordinating with customers and suppliers on complex projects is desirable• General knowledge of Root Cause / Corrective Action, Lean principles, project planning, data acquisition, and analysisWhat We OfferMoog Named to Glassdoor’s 2026 Best Places to WorkFlexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, EV chargingSecurity ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.We review applications on an ongoing basis, and the job posting will be closed once a suitable candidate is selected. We recommend all interested individuals to apply as soon as possible.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-LW1#LI-HybridSummaryLocation: Wolverhampton, GBRType: Full time

Job Title: Licensed Aircraft EngineerLocation: Shropshire, EnglandCompensation: 49,016.78 + BenefitsRole Type: Full time / PermanentRole ID: SF74307Build a safer world through precision engineeringAt Babcock, we’re working to create a safe and secure world, together. If you join us, you can play your part as aLicensed Aircraft Engineer at RAF Cosford near Albrighton, Wolverhampton.The roleAs a Licensed Aircraft Engineer, you’ll play a critical role in ensuring aircraft are maintained to the highest safety and regulatory standards. This is an exciting opportunity to work on complex aviation platforms in a role that directly contributes to operational readiness and mission success—while supporting your own professional growth within a world-class engineering environment.Day-to-day, you will:Carry out scheduled and unscheduled aircraft maintenance in line with regulatory requirementsCertify work completed in accordance with Part 145 or equivalent approvalsDiagnose faults and completing repairs efficiently to minimise downtimeEnsure all maintenance activities are recorded accurately and in compliance with standardsSupport continuous improvement initiatives to enhance safety, quality, and performance.This is a full-time role based on site at RAF Cosford. Shift patterns for this role are 40 hours per week including weekends. Travel to other Babcock and customer sites may be required.Essential experience of the Licensed Aircraft Engineer:Demonstrating experience working in a regulated aviation maintenance environmentApplying strong knowledge of aircraft systems and maintenance proceduresHolding relevant type ratings or experience across similar aircraft platformsWorking effectively within a team while maintaining high attention to detailCommunicating clearly with stakeholders to ensure operational requirements are met.Qualifications for the Licensed Aircraft Engineer:UK CAA qualification or equivalent/similarMust hold a B1.1 or B.1.2 or B3 or equivalent/similar licence.Security ClearanceThe successful candidate must be able to achieve and maintain (BPSS) Counter Terrorist Check (CTC) security clearance for this role.Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. Further details are available at United Kingdom Security Vetting: clearance levels - GOV.UK (www.gov.uk).What we offerGenerous holiday allowanceMatched contribution pension scheme, with life assuranceAccess to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+Employee shopping savings portalPayment of Professional FeesReservists in the armed forces receive 10-days special paid leaveHoliday Trading is a benefit that allows UK Babcock employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually.‘Be Kind Day’ enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity.BabcockWe’re Babcock — a global FTSE 100 organisation with over 26,000 people working together to make a difference.Here, you’ll be part of something bigger. From initial design to final decommissioning, your work will contribute to products and services that are essential to national security and public infrastructure. Together, we’re building a future that lasts — not just through the impact we make, but through meaningful careers that respect your work-life balance.We call that lifetime engineering.Join us and see how far we can go, together.We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please emailcareers@babcockinternational.com with the subject header ‘Reasonable adjustments requirement’. We’re committed to building an inclusive culture where everyone’s free to thrive. We are happy to talk about flexible working – please ask about alternative patterns of work at interview.Closing date: 28/08/2026#AVIATION24

Field Service Engineer - Fabrication & MIG Welding Covering Midlands Patch £38,000 - £42,000 basic + Overtime (Realistic total earnings £50,000) + Training + Van + Pension \n Do you have MIG Welding and Fabrication skills and want a field-based role covering the Midlands? Are you looking for variety, job security and a reputable employer? \n The company is a national business involved in waste handling and loading bay equipment. Due to winning new long-term contracts, they are looking to expand their operation in key areas of the UK. \n The role involves MIG Welding and Fabrication repairs of balers, compactors, dock levellers and similar equipment on behalf of established commercial and industrial clients. The bulk of your work will be around Birmingham, extending out to Shrewsbury, Gloucester and Nottingham, with occasional travel further afield. \n This is a great opportunity to join an expanding company during a period of sustained growth. \n The Role: \n\n • Field Service Engineer, working on client sites across the Midlands\n, • Monday to Friday, 45 hours contracted with 50 hours guaranteed pay\n, • Overtime paid at time and a half beyond guaranteed hours\n\n Candidate Requirements: \n\n • Good fabrication skills, including MIG welding\n, • Reasonable mechanical skills\n, • Full driving licence\n\n Contact: Sebastian Petitti \n Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles, ranging from mid to senior level positions. Please note we can only accept applications from candidates with a valid right to work in the UK. All appointments are subject to standard reference and right-to-work checks. \n INDMP

Job ID: 01852701Posted: Posted 30+ Days AgoStart Date: 2026-07-09Location: GB-WLV-WOLVERHAMPTON-001 ~ Wobaston Rd ~ HS MARSTON AEROCountry: United KingdomTime Type: Full timeDate Posted:2026-07-09 Country:United Kingdom Location:Wolverhampton, Wolverhampton Position Role Type:OnsiteCollins Aerospace is a global leader in technologically advanced and intelligent solutions for the aerospace and defence industry.This is an exciting new role within Collins and a unique opportunity to be part the ASG electric thrust reverser actuation centre of excellence, working as part of a team of technical innovators in the development of new technologies to position the business for success on next generation of aerospace nacelle actuation. The position will be located within a new bespoke facility in Wolverhampton.Reporting to the ASG-UK Site Lead – Chief Engineer, you will be responsible for delivering structural analysis activities to support the design and development of electric actuation systems and associated subsystems.What You Will DoAs a Senior Stress Engineer, Engineer shall be responsible for performing preliminary and detailed structural analysis to support the design and development phase for electric actuation and associated subsystems.Responsibility extends across the entire life cycle of the product, from conceptualizing and design, to prototyping and manufacturing, integration and verification testing, through production support. You will be expected to support the stress activities using both classical and computational methods, working with a wider team to plan and manage the analysis workload, develop new capability whilst working to the highest level of integrity. In addition, you will collaborate across a multi-functional team and work with internal and external customers during all phases of design, integration, test and production.You will support new business opportunities and develop key customer relationships. You will also support the development of the engineering strategy, including a technology roadmap and new business opportunities.Your responsibilities will include:Carry out preliminary sizing analysis and conceptual design support.Perform classical and computational analysis including:Analysis of mechanical elements such as gear, splines, threads, lead/ball screws and bearings.Produce technical reports for both internal and external customers.Produce technical summaries for both internal and external customers.Assist in the development of new capability to support technology roadmaps.Support failure reporting and corrective action, investigative and deep dive analysis.Support the wider local and global Stress Analysis team in all aspects of structural analysisCollaborate across the team to identify synergies, best practices, and opportunitiesThe role will be based in a new Collins Aerospace facility in Wolverhampton, UK, with <10% international travel.What You Must HaveQualified to degree-level in a Mechanical Engineering discipline.Demonstrated stress analysis experience.Working level of understanding of classical analysis methods including:Mechanical components.Classical stressing methods (Shigley, Peterson, Bruhn etc).Strength of materials.Static and fatigue strength calculations.Working knowledge of structural FEA including:Linear analysisNon-linear material analysisContact/assembly model analysisAbility to derive margins of safety and damages with a high level of confidence.Proven ability for problem solving in structural analysis environments.Experience in supporting failure investigations.Excellent written and oral communication skills to a wide range of audiences.A passion for structural analysis, self-development and excellence within a team.Desirable ExperienceExperience using Ansys, MathCAD and CATIA.What We OfferPeople are core to what we do. As such, we are committed to providing an industry leading benefits package. We offer a highly competitive salary, annual bonus, and many other benefits to include:Competitive salary and package25 days annual leave, plus public holidays plus the option to buy / sell up to 5 days per yearGenerous Employer Contribution Pension Scheme with 2:1 matched contributions up to 10%Private Medical InsuranceHealth & Wellbeing Cash Plan - (dental/optical/therapy/chiropody/health screening)Life Assurance & Group Income protection scheme participationEmployee Discounts & Flexible Benefits platformSupport with professional feesEmployee Assistance Programme (EAP)Employee recognition schemesOpportunities for professional development and career growthand so much more!Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.Apply now and be part of the team that’s redefining aerospace, every day!Please note that potential candidates will be subject to Baseline Personnel Security Standard (BPSS) and background checks.RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms:Click on this link to read the Policy and Terms

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title :Manufacturing Engineering Team Lead Reporting To:Manufacturing Engineering Manager Work Schedule:Onsite Wolverhampton, GBR We are seeking a Manufacturing Engineer Team Lead er to supervise and manage the resource of our Manufacturing Engineer ing Team in the day-to-day running of our machine shop . The successful candidate will be responsible for setting and monitoring workload priorities, individual targets, and offering guidance on best manufacturing practices while leading the shop floor route cause corrective actions .Responsibilities IncludeManage and mentor the Manufacturing Engineer ing team, both shop floor and personnel management.Direct work assignments, scheduling, and review of work in progress.Support personnel actions including performance reviews, and coordination of training and development.Establish and deliver lean processes into the manufacturing environment.Work with the Manufacturing Engineering Manager in identifying key process improvement projects.Create and support the deployment of effective methods and processes based on 3D models for product launch into the manufacturing area.Help e stablish standard times for each operation ensuring minimisation of the 7 wastes.Support Manufacturing Engineer(s) / Technician(s) in the creation, review, and approval of gauging, fixtures, and special tooling.Provide support and technical assistance to other departments on the facility and, at times, globally .Responsible for shop support resource allocation and direct involvement with any support actions.Key Skills and experience:BSc Degree (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering /Leadership . (Preferred) .HNC/ HND (vocational, professional, or advanced) or equivalent in the field of Mechanical/Production/Manufacturing Engineering.P rogressive experience (usually post-education) in the field of manufacturing/process engineering .P rogressive experience (usually post-education) in the field Lean methodologies and Zero Defects.Proven previous knowledge of machining practices including but not limited to;Mill/Turn - 5 Axis Milling - Grinding - Gear Cutting - Spark / Wire Eroding - Honing / LappingProven leadership / management qualities including 1 to 1 support, development of training plans and workload resource management.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title :Mill -turner Night shift Reporting To:Manager, Manufacturing Work Schedule:Onsite Wolverhampton, GBR Moog Military Aircraft Group is seeking a skilled, apprentice-trained machinist to join our team in Wolverhampton. At Moog, we prioritize our customers by designing complex, bespoke, and high-profile mechanical products. Our machinists work to exceptionally close tolerances, a critical requirement in the aerospace industry.Key Responsibilities:Set up and operate multiple CNC machines/processes.Perform first-off inspections and complete necessary quality documentation.Key Experience:Recognised engineering apprenticeship.Previous experience in an engineering/manufacturing role, ideally within the aerospace industry.Strong knowledge of machining techniques and appropriate tooling.Proven skills in a multi-axis/complex machining environment.Attention to detail, accuracy, and process improvement techniques.Proficiency in using relevant inspection techniques/equipment to achieve drawing tolerances.Over 5 years experience on different mill/turn CNC machines (Okuma , Mazak , Lathe, DMG , Matsura , Puma)Additional Information:This role follows a day shift pattern and may in the future lead to a double-day shift pattern with overtime as requested.Candidates must be self-certified and hold a quality stamp after the qualifying period.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title : Manual/CNC Cylindrical GrinderReporting To: Team Leader Parts GenerationWork Schedule: Onsite Wolverhampton, GBRAt Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves.Job SummaryMoog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton on Shifts once training is completed. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry.Responsibilities IncludeExperience in Setting, Operating Manual Cylindrical machines S20/RM250 and Setting CNC ( Preferably Studer S33/S31)Capability of machining exotic and hardened materialsCarry out own 1st off inspection and check/complete the necessary quality documentationPrecision manual cylindrical grinding, working to achieve limits to 0.00005"Able to set and run multiple machine / processes.Key Skills and experience:A recognised engineering apprenticeshipCylindrical grinding experience essentialMate grinding experience preferredPrevious experience within an engineering/manufacturing role within the aerospace industryGood knowledge of machining techniques and appropriate toolingAttention to detail and accuracy and process improvementUsing the relevant inspection techniques/equipment to achieve drawing toleranceThis role will require the individual to work a shift pattern, including nights and overtime when requested.The role requires the candidate to be self-certified and a quality stamp holder after qualifying period.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Embrace the journey and explore exciting possibilities!Your CV will be stored in our central recruitment database upon applying at Moog.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title : First Article InspectorReporting To: Technical Operations, Quality ControlWork Schedule: Onsite Wolverhampton, GBRMoog Aircraft Group Wolverhampton is seeking an experienced First Article Inspector to take ownership of AS9102-compliant FAI activity across new product introduction, product changes, and supplied components.Key Responsibilities Perform complete First Article Inspections in accordance with AS9102 and customer-specific requirementsVerify all dimensions, tolerances and features against engineering drawings and specificationsInterpret complex drawings including full GD&T requirementsProduce accurate, detailed FAIR documentation and validation packages for internal and customer approvalRecord inspection data within digital quality systemsIdentify and formally report non-conformances in line with AS9102 requirementsSupport root cause analysis and corrective actionsLiaise closely with Engineering, Production and Quality teams to resolve technical queries and improve manufacturabilitySupport receiving, in-process and final inspection activities as requiredTechnical Requirements Extensive experience within aerospace dimensional inspectionStrong AS9102 First Article Inspection experience (essential)Proficient in interpreting engineering drawings and GD&TExperienced in using precision measuring equipment including: VerniersMicrometers (inside, outside, depth)Bore gaugesHeight gaugesDepth micrometersManual and/or CNC CMMExperience within AS9100 quality environmentsSAP and/or Solumina experience advantageousSkills & Experience Able to manage workload independently with minimal supervisionHigh attention to detail with the ability to balance accuracy and production demandsStrong communication skills across cross-functional teamsHNC/HND (or equivalent) in Engineering, or extensive aerospace quality experienceMust be eligible to obtain UK Security ClearanceFlexible to work shift patterns as requiredThis role reports to the Quality Team Leader.What We OfferFlexible benefits package and development opportunities to support career progression33 days annual leave (including bank holidays)Private medical insurance, mental health support and financial adviceGenerous life assurance and company pension contribution (from 6%)Employee share options, free onsite parking, EV chargingWe review applications on an ongoing basis, and the job posting will be closed once a suitable candidate is selected. We recommend all interested individuals to apply as soon as possible.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that if clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.You Matter at Moog Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.#LI-LW1#LI-OnsiteTPBN1_UKTJ

Job SummaryInside Right is looking for an apprentice trained, experienced Manual / CNC Grinder to join an Industry Powerhouse .Our client is focused on their customer and this means designing complex mechanical products that are often bespoke and high profile. Therefore, their Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry.Responsibilities IncludeExperience in Setting, Operating Manual Cylindrical machines S20/RM250 and Setting CNC ( Preferably Studer S33/S31)Capability of machining exotic and hardened materialsCarry out own 1st off inspection and check/complete the necessary quality documentationPrecision manual cylindrical grinding, working to achieve limits to 0.00005"Able to set and run multiple machine / processes.Key Skills and experience:A recognised engineering apprenticeshipCylindrical grinding experience essentialMate grinding experience preferredPrevious experience within an engineering/manufacturing role within the aerospace industryGood knowledge of machining techniques and appropriate toolingAttention to detail and accuracy and process improvementUsing the relevant inspection techniques/equipment to achieve drawing toleranceThis role will require the individual to work a shift pattern, EARLYS/LATES rotating, and overtime when requested.The role requires the candidate to be self-certified and a quality stamp holder after qualifying period.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security.If this sounds like you, in the first instance please send me an updated version of your CV in reply to this advert. Disclaimer:-Inside Right is acting as an employment business on behalf of a client partner. If you have not had a response to your application within 2 weeks of applying, on this occasion you may have been unsuccesful.Inside Right is an equal opportunities/affirmative action employer. All qualified applicants will receive considerationfor emloyment without regard to race, colour, sex, religion, sexual orientation, gender identity, national origin, disability or veteran status, age, or any protected characteristicSkills RequiredKey Skills and experience:A recognised engineering apprenticeshipCylindrical grinding experience essentialMate grinding experience preferredPrevious experience within an engineering/manufacturing role within the aerospace industryGood knowledge of machining techniques and appropriate toolingAttention to detail and accuracy and process improvementUsing the relevant inspection techniques/equipment to achieve drawing toleranceQualifications RequiredA recognised engineering apprenticeshipCylindrical grinding experience essentialMate grinding experience preferredPrevious experience within an engineering/manufacturing role within the aerospace industryKeywordsManual/CNC Cylindrical GrinderMachiningSetting, Operating Manual Cylindrical machines S20/RM250 and Setting CNC ( Preferably Studer S33/S31)Cylindrical GrindingAerospaceManufacturingInspectionFine TolerancesTPBN1_UKTJ

Job ID: 01852696Posted: Posted 30+ Days AgoStart Date: 2026-07-07Location: GB-WLV-WOLVERHAMPTON-001 ~ Wobaston Rd ~ HS MARSTON AEROCountry: United KingdomTime Type: Full timeDate Posted:2026-07-07 Country:United Kingdom Location:Wolverhampton, Wolverhampton Position Role Type:OnsiteCollins Aerospace is a global leader in technologically advanced and intelligent solutions for the aerospace and defence industry.This is an exciting new role within Collins and a unique opportunity to be part the ASG electric thrust reverser actuation centre of excellence, leading a team of technical innovators in the development of new technologies to position the business for success on next generation of aerospace nacelle electric actuation. The position will be located within a new bespoke facility in Wolverhampton.Reporting to the ASG-UK Site Lead – Chief Engineer you will be the technical focal point for the project across the full product lifecycle, from concept development and architecture definition through design, verification, certification, industrialisation and in-service support. This is an exciting opportunity to shape future electric actuation system technologies and deliver robust, reliable and certifiable solutions for demanding aerospace applications.What You Will DoIn this role, you will be responsible for providing technical leadership to a multifunctional product development team, driving innovation of new technology and maturing robust product designs to certification for aerospace electric actuation applications.Your responsibilities will include:Working within a team of engineers contributing to the development of aerospace actuation systemsProviding technical input and engineering expertise across assigned work packagesSupporting system design activities throughout the full product lifecycle, from requirements through to qualification and production supportContributing to system trade studies and technical assessmentsSupporting engineering planning activities in collaboration with project and engineering leadsContributing to design reviews and technical discussions with internal stakeholdersSupporting the development of robust and innovative engineering solutionsWorking with subject matter experts to support engineering integrity and compliance with design processesSupporting technical investigations and contributing to root cause analysis activitiesAssisting in the capture of lessons learned and continuous improvement activitiesSupporting customer and supplier technical discussions where requiredContributing to the development of engineering tools, methods, and future capabilitySupporting the preparation of technical documentation and engineering outputsSharing knowledge and supporting the development of junior engineers within the teamThe role will be based in a new Collins Aerospace facility in Wolverhampton, UK, with <20% international travel.What You Must HaveDegree in Engineering or equivalent qualification (Mechanical or related discipline preferred)Experience in aerospace or electro-mechanical system design and developmentUnderstanding of aerospace actuation systems or similar complex mechanical systemsExperience working within multidisciplinary engineering teamsStrong analytical and problem-solving skillsExperience supporting technical investigations and engineering issue resolutionAbility to produce clear technical documentation and communicate effectivelyGood understanding of engineering principles and design processesAbility to work collaboratively in a structured engineering environmentStrong attention to detail and commitment to engineering qualityDesirable ExperienceExperience working on aerospace development or certification programmesKnowledge of electro-mechanical actuation systemsFamiliarity with engineering analysis tools and methods (e.g. CAD/FEA tools such as CATIA or ANSYS)Understanding of aerospace development standards (e.g. ARP4754, DO-178, DO-254)Experience supporting design reviews and engineering verification activitiesWhat We OfferPeople are core to what we do. As such, we are committed to providing an industry leading benefits package. We offer a highly competitive salary, annual bonus, and many other benefits to include:Competitive salary and package25 days annual leave, plus public holidays plus the option to buy / sell up to 5 days per yearGenerous Employer Contribution Pension Scheme with 2:1 matched contributions up to 10%Private Medical InsuranceHealth & Wellbeing Cash Plan - (dental/optical/therapy/chiropody/health screening)Life Assurance & Group Income protection scheme participationEmployee Discounts & Flexible Benefits platformSupport with professional feesEmployee Assistance Programme (EAP)Employee recognition schemesOpportunities for professional development and career growthand so much more!Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.Apply now and be part of the team that’s redefining aerospace, every day!Please note that potential candidates will be subject to Baseline Personnel Security Standard (BPSS) and background checks.RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms:Click on this link to read the Policy and Terms

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Manufacturing EngineerReporting To:Manufacturing Engineering ManagerWork Schedule:Onsite – Wolverhampton, GBRAbout the RoleWe are looking for a talented and driven Manufacturing Engineer to join our team. This is an exciting opportunity to play a key role in developing and improving manufacturing processes for precision-machined components produced from a range of materials.Working closely with Design Engineering, Product Engineering and Operations teams, you will be responsible for introducing robust manufacturing solutions, supporting continuous improvement initiatives, and ensuring products are successfully transitioned into production with a strong focus on Quality, Cost and Delivery.You will also contribute to automation projects, design-for-manufacture activities, and the implementation of Lean manufacturing principles across the business.Key ResponsibilitiesDevelop and optimise manufacturing processes for precision-machined components.Create and maintain machining processes for complex components with tight tolerances.Support Continuous Improvement projects using Lean and Six Sigma methodologies.Drive process improvements focused on safety, quality, efficiency and cost reduction.Provide Design for Manufacture (DfM) guidance during product development.Support APQP activities, including DFMEA, PFMEA, Control Plans and MSA studies.Assist with PPAP activities and GD&T interpretation and application.Design and review tooling and fixturing solutions.Review and approve manufacturing documentation, including Work Instructions (WIs) and Standard Operating Procedures (SOPs).Create and maintain manufacturing routings within SAP/Solumina.Support root cause investigations and corrective action activities.Identify and deliver automation opportunities within the manufacturing environment.Work closely with Manufacturing Engineering, Design Engineering and Operations teams to ensure new products are production-ready.Support the day-to-day operation of the machine shop, minimising downtime caused by process issues.Assist in the delivery of process improvement and automation projects within the prismatic machining cell.Support the Lead and Senior Manufacturing Engineers in achieving departmental objectives and production targets.Skills & ExperienceWe are looking for someone with strong technical expertise and a passion for continuous improvement. Ideally, you will have experience in:EssentialManufacturing Engineering within a precision machining environment.CAD software such as SolidWorks or Siemens NX.CNC machining processes and manufacturing methods.Cutting tool selection and optimisation.Fixture and tooling design.Root cause analysis and corrective action methodologies.APQP and quality improvement tools.Lean Manufacturing and Continuous Improvement techniques.Working collaboratively across engineering and production functions.DesirableCAM programming experience, ideally Edgecam or Siemens NX.5-axis milling process development.NC post-processing knowledge.SAP and/or Solumina experience.Six Sigma qualification or practical application experience.Experience implementing manufacturing automation solutions.Knowledge of PPAP, GD&T and DFSS methodologies.What You'll BringA proactive, solutions-focused approach.Strong problem-solving and analytical skills.Excellent communication and stakeholder management abilities.The ability to manage multiple priorities in a fast-paced engineering environment.A commitment to continuous improvement and operational excellence.Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.In Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.Apply today to become part of a team that's delivering engineering excellence through innovation, precision and continuous improvement.SummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Mill/Turner, Nights - MazakWork Schedule:Onsite – Wolverhampton, GBRJob DescriptionMoog Aircraft Group are currently seeking a skilled CNC Machinist with proven experience operating Mazak 3‑axis and 4‑axis machines, including complex mill‑turn applications to join our team at our Wolverhampton facility.The role involves machining high‑precision components from titanium, steel, and aluminum, working to tight tolerances and quality standards in a production or aerospace/precision engineering environment.Programming is not a requirement as all shop programs are produced off-line by our Manufacturing Engineering department, but some ISO/EIA programming experience may be useful in out of hours trouble shooting but not a core requirement.Key ResponsibilitiesSet, operate, and adjust Mazak CNC machines (3‑axis and 4‑axis), including mill‑turn centres.Machine complex components to tight tolerances and high surface finish requirementsWork with difficult and exotic materials including titanium, stainless steel, and aluminum alloysInterpret and work from engineering drawings and technical specificationsOperators will not normally see a cad model in usual operating conditions. They will work with process stage sketches, tech specs and drawing references where required, using the in-house Solumina interface. Solumina experience will not need to be a requirement here though as it is easily picked up for shop use.Offsetting and tool compensation for process control is essential and some experience of speed / feed use may be preferrable for out of hours troubleshooting.Carry out first‑off inspections and ongoing quality checks using a variety of measuring equipment, including CMM machinery.Identify and resolve machining or tooling issues to minimise scrap and downtimeMaintain machines and work area to ensure safe and efficient operationWork to production schedules while maintaining quality and safety standardsKey Skills & ExperienceApprenticeship or NVQ Level 3 (or equivalent) in Engineering / CNC Machining preferredRelevant manufacturing or machining certifications advantageousProven experience operating Mazak CNC machinesStrong background in 3‑axis and 4‑axis machiningExperience with complex mill‑turn operationsConfident machining titanium, steel, and aluminumStrong understanding of cutting tools, feeds, speeds, and tool life managementExcellent ability to read and interpret technical drawings and GD&TCompetent with precision measuring equipment (micrometers, verniers, CMM awareness)Strong attention to detail and commitment to qualityYou will work Monday - Thursday 10pm - 6am and Friday 4pm - 9pm.Shift allowance is 33%Security ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visit www.gov.uk.In Return Moog can offer you:A longstanding career within a culture of trust and innovation.33 Days Annual Leave (including Bank Holidays).Benefits include Life Assurance, Company Pension Contribution beginning at 6%, and Employee Share Option in addition to an extensive Flexible Benefits Package, and Hybrid working arrangements.You Matter at Moog – Our Mission and VisionAt Moog, we believe in the people who work for us. As part of our investment in our people, we make diversity, equity, and inclusion a priority. Our goal is to create a culture where we value, respect, and provide fair treatment and equal opportunities for all employees.Moog aspires to be a diverse, equitable, and inclusive company where employees are empowered to bring their whole, authentic selves to work every day.By recognizing and celebrating our differences, we cultivate an environment that’s the right fit for every person inside of it.It is our core belief that if we take care of our employees, they will take care of our customers, partners, shareholders, and communities where we live and work. Working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.You Can Do This!Once you apply for a position with Moog your CV will be held on our central recruitment management database. If you would prefer that your details are not retained by Moog, please contact us via the following email address: ukcareers@moog.comNote for Recruitment Agencies: The UK Resourcing Team diligently manages all vacancies through direct hiring and referrals, prioritizing efficiency, and excellence. When external support becomes necessary, we formally release these opportunities to agencies on our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be acceptedSummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work.Job Title:Stress EngineerReporting To:Manager, EngineeringWork Schedule:Hybrid – Wolverhampton, GBRMoog Military Aircraft Group are recruiting for a Degree Qualified Stress Engineer to join our Commercial Actuation team at our Wolverhampton facility.The ideal candidate for the role should be able to demonstrate at least five years’ experience in aerospace stress analysis of gearboxes, geared rotary actuators, power drive units, hydraulic manifolds and transmission shafts for high lift actuation or of Horizontal Stabiliser Trim Actuators.If your experience is not within the Aerospace industry, then stress analysis experience of other complex mechanical components and assemblies will be considered. Deliverables include static and fatigue stress calculations, stress summaries and reports and approval of component and assembly drawings. Support to the development department may be required involving compilation or review of test specifications, defining loading cycles for test and reviewing test results.Key Skills and Experience:Proven capability in stress analysis, ideally of high lift actuation components and assembliesAble to prepare stress calculations and reports to a high standardReviewer of test specifications and reports (QTP, QTR, ATP etc.)Able to manage priorities and multi-task efficientlyContributes to knowledge sharing within the stress analysis groupProvide assistance to other stress engineers when requiredConfident engaging peers, management and customers in stress related discussionsContributes technical knowledge to the Engineering team in support of analysis methods, research activities and failure investigationsKnowledge of static (Proof / Ultimate), fatigue and impulse testing is an advantageMRB / Non-conformance experience will be an advantageExperience in hand calculations is essentialExperience using Mathcad would be an advantageCAD (SolidWorks or Unigraphics NX) experience is desirableExperience of FEA is required, competence using ANSYS is an advantageKnowledge of aerospace materials, their mechanical, static and fatigue properties and the influence of manufacturing processes on the strength of components will be beneficial.Good communication skillsProactive and driven – will make things happenSecurity ClearanceBaseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. For further information please visitIn Return Moog can offer you:You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally.Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options.You Matter at Moog – Our Mission and VisionAt Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all.Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.SummaryLocation: Wolverhampton, GBRType: Full time

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Mill/Turner, Nights - Mazak Work Schedule: Onsite Wolverhampton, GBR Job Description Moog Aircraft Group are currently seeking a skilled CNC Machinist with proven experience operating Mazak 3-axis and 4-axis machines, including complex mill-turn applications to join our team at our Wolverhampton facility. The role involves machining high-precision components from titanium, steel, and aluminum, working to tight tolerances and quality standards in a production or aerospace/precision engineering environment. Programming is not a requirement as all shop programs are produced off-line by our Manufacturing Engineering department, but some ISO/EIA programming experience may be useful in out of hours trouble shooting but not a core requirement. Key Responsibilities Set, operate, and adjust Mazak CNC machines (3-axis and 4-axis), including mill-turn centres. Machine complex components to tight tolerances and high surface finish requirements Work with difficult and exotic materials including titanium, stainless steel, and aluminum alloys Interpret and work from engineering drawings and technical specifications Operators will not normally see a cad model in usual operating conditions. They will work with process stage sketches, tech specs and drawing references where required, using the in-house Solumina interface. Solumina experience will not need to be a requirement here though as it is easily picked up for shop use. Offsetting and tool compensation for process control is essential and some experience of speed / feed use may be preferrable for out of hours troubleshooting. Carry out first-off inspections and ongoing quality checks using a variety of measuring equipment, including CMM machinery. Identify and resolve machining or tooling issues to minimise scrap and downtime Maintain machines and work area to ensure safe and efficient operation Work to production schedules while maintaining quality and safety standards Key Skills & Experience Apprenticeship or NVQ Level 3 (or equivalent) in Engineering / CNC Machining preferred Relevant manufacturing or machining certifications advantageous Proven experience operating Mazak CNC machines Strong background in 3-axis and 4-axis machining Experience with complex mill-turn operations Confident machining titanium, steel, and aluminum Strong understanding of cutting tools, feeds, speeds, and tool life management Excellent ability to read and interpret technical drawings and GD&T Competent with precision measuring equipment (micrometers, verniers, CMM awareness) Strong attention to detail and commitment to quality You will work Monday - Thursday 10pm - 6am and Friday 4pm - 9pm. Shift allowance is 33% Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: A longstanding career within a culture of trust and innovation. 33 Days Annual Leave (including Bank Holidays). Benefits include Life Assurance, Company Pension Contribution beginning at 6%, and Employee Share Option in addition to an extensive Flexible Benefits Package, and Hybrid working arrangements. You Matter at Moog Our Mission and Vision At Moog, we believe in the people who work for us. As part of our investment in our people, we make diversity, equity, and inclusion a priority. Our goal is to create a culture where we value, respect, and provide fair treatment and equal opportunities for all employees. Moog aspires to be a diverse, equitable, and inclusive company where employees are empowered to bring their whole, authentic selves to work every day. By recognizing and celebrating our differences, we cultivate an environment thats the right fit for every person inside of it. It is our core belief that if we take care of our employees, they will take care of our customers, partners, shareholders, and communities where we live and work. Working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Stress Engineer Reporting To: Manager, Engineering Work Schedule: Hybrid Wolverhampton, GBR Moog Military Aircraft Group are recruiting for a Degree Qualified Stress Engineer to join our Commercial Actuation team at our Wolverhampton facility. The ideal candidate for the role should be able to demonstrate at least five years experience in aerospace stress analysis of gearboxes, geared rotary actuators, power drive units, hydraulic manifolds and transmission shafts for high lift actuation or of Horizontal Stabiliser Trim Actuators. If your experience is not within the Aerospace industry, then stress analysis experience of other complex mechanical components and assemblies will be considered. Deliverables include static and fatigue stress calculations, stress summaries and reports and approval of component and assembly drawings. Support to the development department may be required involving compilation or review of test specifications, defining loading cycles for test and reviewing test results. Key Skills and Experience: Proven capability in stress analysis, ideally of high lift actuation components and assemblies Able to prepare stress calculations and reports to a high standard Reviewer of test specifications and reports (QTP, QTR, ATP etc.) Able to manage priorities and multi-task efficiently Contributes to knowledge sharing within the stress analysis group Provide assistance to other stress engineers when required Confident engaging peers, management and customers in stress related discussions Contributes technical knowledge to the Engineering team in support of analysis methods, research activities and failure investigations Knowledge of static (Proof / Ultimate), fatigue and impulse testing is an advantage MRB / Non-conformance experience will be an advantage Experience in hand calculations is essential Experience using Mathcad would be an advantage CAD (SolidWorks or Unigraphics NX) experience is desirable Experience of FEA is required, competence using ANSYS is an advantage Knowledge of aerospace materials, their mechanical, static and fatigue properties and the influence of manufacturing processes on the strength of components will be beneficial. Good communication skills Proactive and driven will make things happen Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Mill/Turner Reporting To: Manager, Manufacturing Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is looking for an apprentice-trained, experienced CNC Machinist (Turner/Mill-Turn) . At Moog, were focused on the customer and for us, this means designing complex mechanical products that are often bespoke and high-profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Key Responsibilities: Set up and operate multiple CNC machines/processes. Perform first-off inspections and complete necessary quality documentation. Capability and competent in setting up and using machine tools Carry out own 1st off inspection and check/complete the necessary quality documentation Proven experience in a machine shop environment Competent in setting up and using machine tools Confident in using precision measurement equipment. Key Experience: Recognised engineering apprenticeship. Previous experience in an engineering/manufacturing role, ideally within the aerospace industry. Strong knowledge of machining techniques and appropriate tooling. Proven skills in a multi-axis/complex machining environment. Attention to detail, accuracy, and process improvement techniques. Proficiency in using relevant inspection techniques/equipment to achieve drawing tolerances. Over 5 years experience on different mill/turn CNC machines (Okuma , Mazak , Lathe, DMG , Matsura, Puma) Additional Information: This role follows a day shift pattern and may in the future lead to a 6.00am - 2.00pm. 2.00pm - 10.00pm or 10.00pm - 6.00am shift pattern. Candidates must be self-certified and hold a quality stamp after the qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: Youll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. Youll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply.

Senior Electrical, Control & Instrumentation Engineer Location: Moor Row, Cumbria & Warrington, Cheshire | Hybrid – 3 days per week onsite Salary: £51,500–£63,500 per annum DOE + Benefits Lead the Future of Nuclear Engineering An exciting opportunity has arisen for a Senior Electrical, Control & Instrumentation (EC&I) Engineer to join a leading specialist engineering organisation delivering critical projects across nuclear, clean energy, defence and civil decommissioning . With a team of around 5,000 specialists , the organisation works on some of the UK's most important engineering programmes, helping strengthen energy security and national protection while creating a safer, more sustainable future. This is a career-defining opportunity to lead the design, integration and maintenance of high-integrity EC&I systems within highly regulated, safety-critical environments. You'll work alongside experienced engineering professionals, tackle complex technical challenges and play a key role in delivering engineering excellence. As a Senior EC&I Engineer, you will: Lead the design and delivery of EC&I systems within regulated and safety-critical environments. Develop and deliver robust engineering solutions in line with applicable nuclear safety standards . Provide technical leadership across complex, multidisciplinary engineering projects. Work closely with clients, regulators, suppliers and internal teams to resolve technical challenges and drive successful delivery. Produce, review and manage technical documentation, including specifications and safety case contributions . Support project delivery, technical coordination and continuous improvement across engineering activities. Help maintain the highest standards of safety, quality and engineering excellence . We're looking for someone with: Proven experience designing and delivering EC&I systems in regulated environments . Knowledge and application of nuclear safety standards, including IEC 61508 and BS EN 61511 . Experience working within multidisciplinary engineering teams on complex projects. Strong technical communication skills, with the confidence to engage with clients, regulators and suppliers . Experience producing and reviewing technical documentation and contributing to safety cases . A degree in Electrical Engineering, Control Engineering, Instrumentation Engineering , or a related discipline. Chartered Engineer status or actively working towards Chartered status is preferred. Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) clearance for this role. If you're an experienced Senior EC&I Engineer ready to take on complex, high-integrity engineering challenges and make a genuine contribution to the future of the UK's nuclear and critical infrastructure, this could be your next career move. Apply now and lead the future of nuclear engineering. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Product Engineer Reporting To: Engineer Sr., Product Work Schedule: Hybrid Wolverhampton, GBR As a Product Engineer, you will report to the Senior Product Engineer (Global Sustainment or Original Equipment) and provide engineering support across assigned product lines at Wolverhampton. Due to the continued growth of our operations, this role offers the opportunity to work on increasingly complex products that require technical guidance and innovative solutions. You will collaborate closely with other Product Engineering team members and work independently when required. The role may also involve leading special projects. You will support workshop technicians with technical queries, perform engineering investigations, prepare repair and assembly documentation, and contribute to product improvement initiatives that influence overall product performance, cost, and reliability. You may also engage in customer- or supplier-facing activities, such as during engineering investigations or product validation. The ideal candidate will be an enthusiastic problem solver, capable of coordinating activities across multiple departments. Your work will have a direct impact on product quality, turn-around times, and cost efficiency. Key Responsibilities Working under the direction of the Senior Product Engineer, your responsibilities will include: Generate and maintain repair and assembly work instructions Specify, implement, and validate product rework methods Promote a culture of compliance with procedures to maintain product integrity, collaborating with Design Engineering, Manufacturing, Quality, Programs, Test Equipment, EHS, and Supply Chain to resolve issues Lead and implement process improvements aligned with business objectives Support the introduction of new product lines and repairs (OE and GS) Design, improve, and organize repair and assembly tooling to meet requirements Review test equipment and propose improvements Review and assist in the proofing of technical publications Coordinate and conduct engineering investigations Produce technical reports and documentation Raise and monitor non-conformance reports (NCs) Track and improve First Pass Yield (FPY) to enhance performance Facilitate design changes through drawing redlining and initiating ECN processes Troubleshoot and resolve technical issues in repair, assembly, and test areas Key Skills & Expertise Degree in a relevant engineering discipline or equivalent experience in aerospace or a similarly complex industry Strong understanding of hydraulic and mechanical actuation, with ability to diagnose faults and specify rework Ability to identify producibility and quality improvements in assembly, test, and product design Capacity to make engineering judgments and produce technical justifications Ability to work directly from engineering drawings, CMM data, service bulletins, process specifications, and test procedures Proficiency in Microsoft Office and general computer literacy Experience in aerospace maintenance or OE production environments is preferred Strong written and verbal communication skills Experience coordinating with customers and suppliers on complex projects is desirable General knowledge of Root Cause / Corrective Action, Lean principles, project planning, data acquisition, and analysis What We Offer Moog Named to Glassdoors 2026 Best Places to Work Flexible benefits package and development opportunities to support career progression 33 days annual leave (including bank holidays) Private medical insurance, mental health support and financial advice Generous life assurance and company pension contribution (from 6%) Employee share options, EV charging Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. We review applications on an ongoing basis, and the job posting will be closed once a suitable candidate is selected. We recommend all interested individuals to apply as soon as possible. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. #LI-LW1 #LI-Hybrid TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Manufacture Engineer Reporting To: Lead, Manuf. Eng. Team Work Schedule: Onsite Wolverhampton, GBR Moog Wolverhampton is seeking a skilled and driven Manufacturing Engineer to join our Manufacturing Engineering team. This role is central to the development and optimisation of manufacturing processes for precision machined aerospace components across a range of advanced materials. You will play a key role in new product introduction, legacy product support, and continuous improvement initiatives, ensuring manufacturing excellence across Quality, Cost, and Delivery metrics. Key Responsibilities Develop and implement robust manufacturing processes from 3D models and engineering drawings. Create machining strategies for complex aerospace components (predominantly turning of medium-sized parts). Program Mill/Turn components using 3D CAD/CAM systems (Siemens NX or Edgecam preferred). Design fixtures and tooling; support gauging and special tooling approval. Lead and support DFM, DFSS, APQP activities (DFMEA, PFMEA, Control Plans, MSA). Establish standard operation times and drive Lean improvements to eliminate the 7 wastes. Provide practical problem-solving support (RCCA, non-conformance mitigation). Support shop floor operations, including attendance at daily PRB meetings. Develop turnkey process packages for deployment across Moog manufacturing sites. Collaborate cross-functionally with Design Engineering, Product Engineering, Operations, and Supply Chain. Participate in a shared morning shift rotation (approximately once every 8 weeks). Flexibility to support business needs, including minimal travel. Skills & Experience Required Qualifications HNC/HND (preferred) or Level 3 Apprenticeship with a minimum of 5 years relevant manufacturing engineering experience. Significant progressive experience in manufacturing/process engineering environments. Technical Expertise Strong knowledge of Mill/Turn machining (turning focus). 3D CAD/CAM proficiency (Siemens NX or Edgecam). SolidWorks or Siemens NX CAD experience. Fixture design and tooling selection. NC post-processing. SAP/Solumina experience. Lean, Six Sigma, DFM, DFSS, APQP methodologies. Root Cause Corrective Action (RCCA). Desirable Experience Wire erosion. Deburring processes. Special process plating and coating. Zoller tool setting capability. What Were Looking For Strong analytical and structured problem-solving skills. Ability to influence and collaborate effectively across all business levels. A proactive, solution-focused mindset. Innovative thinking to drive new technologies and process improvements. What We Offer Moog Named to Glassdoors 2026 Best Places to Work Flexible benefits package and development opportunities to support career progression 33 days annual leave (including bank holidays) Private medical insurance, mental health support and financial advice Generous life assurance and company pension contribution (from 6%) Employee share options, EV charging Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. Join Our Talent Pipeline Manufacturing Engineering We are seeking talented individuals to support Moog Inc.s growth at our Wolverhampton site. This advert forms part of our ongoing recruitment pipeline, and applications will be reviewed as they are received. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : CNC Mill/Turner - MATSURA Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite Wolverhampton, GBR Aerospace CNC Machine Operator (Matsuura 5-Axis) Join Moog and help manufacture components that support some of the world's most advanced aerospace and defence programmes. At Moog, innovation starts with people. We're looking for an experienced CNC Machine Operator to join our Prismatics team, operating a state-of-the-art Matsuura MAM72 5-Axis Horizontal Machining Centre to produce complex, high-precision aerospace components. If you thrive on machining to tight tolerances, take pride in quality craftsmanship, and want to work in a business known for engineering excellence, we'd love to hear from you. What You'll Be Doing As an Aerospace CNC Machine Operator, you'll play a critical role in delivering precision-machined components that meet the highest aerospace quality standards. Your responsibilities will include: Setting up and operating the Matsuura MAM72 5-axis machining centre Loading programs, fixtures, tooling and components in line with engineering instructions Manufacturing complex components from aluminium, titanium, stainless steel and aerospace-grade alloys Carrying out first-off, in-process and final inspections Interpreting engineering drawings, specifications and GD&T requirements Monitoring tool wear and making offsets and tool changes as required Using precision measuring equipment including micrometers, verniers, bore gauges and height gauges Maintaining accurate production and traceability records Supporting continuous improvement initiatives across the manufacturing area Ensuring compliance with quality, safety and environmental standards What We're Looking For We're interested in candidates who have experience operating advanced CNC machining centres and a passion for delivering exceptional quality. Essential Experience Proven experience operating Matsuura MAM72 or similar 5-axis CNC machining centres Aerospace manufacturing experience Strong understanding of CNC machining principles Ability to read and interpret complex engineering drawings Experience machining to tight tolerances and demanding surface finish requirements Knowledge of aerospace materials including: Aluminium alloys Titanium Stainless steels Experience using precision inspection equipment Strong troubleshooting and problem-solving skills Excellent attention to detail and quality focus Desirable Qualifications & Experience Time-served engineering apprenticeship NVQ Level 3, City & Guilds, or equivalent engineering qualification Experience working within an AS9100 environment Familiarity with Fanuc-based controls Experience of multi-pallet or lights-out manufacturing Crane and lifting equipment certification Why Join Moog? This is an opportunity to become part of a business that is continuing to grow and invest in its people, technology and future. At Moog, you'll find: A culture built on trust, collaboration and innovation Long-term career development opportunities 33 days annual leave (including Bank Holidays) Competitive pension contribution starting at 6% Life assurance cover Employee share scheme Flexible benefits package A supportive environment where your ideas and contributions matter You Matter at Moog We believe our people are our greatest strength. Moog is committed to creating an inclusive workplace where everyone feels respected, valued and empowered to bring their authentic selves to work. We know that diverse perspectives create better solutions, stronger teams and greater innovation. Our commitment to our employees is simple: if we take care of our people, they will continue to deliver exceptional outcomes for our customers, colleagues and communities. Security Clearance This role requires Baseline Personnel Security Standard (BPSS) clearance and successful candidates must be eligible to obtain and maintain this clearance. If clearance cannot be obtained, any offer of employment may be withdrawn on national security grounds. Ready to Apply? If you're an experienced CNC Machinist looking to work on high-value aerospace products within a world-class manufacturing environment, we'd love to hear from you. Apply today and help shape the future of aerospace engineering at Moog. You Can Do This. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : A & T Technician Reporting To: Team Leader (Assembly & Test) Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group is seeking experienced Assembly & Test Technicians to join our team at our Wolverhampton facility. At Moog, we focus on the customer, designing complex mechanical products that are often bespoke and high-profile. Our team works to exceptionally close tolerances, an essential requirement of the aerospace industry. We know how important our technicians are to our business, and we offer the opportunity for the development of your skills and progression. Join us and be part of a team that values precision, quality, and innovation to shape the way our world moves. Working 37 hours per week; Monday to Thursday 7.30 am 4.15 pm and Friday 7.30 am 11.30 am. Key Responsibilities: Assembly and test of flight-critical actuators and subcomponents with high precision and accuracy. Using measuring equipment such as micrometers, vernier calipers, and height gauges to inspect component parts. Working from engineering drawings and component maintenance manuals. Completing quality audits and taking responsibility for various aspects of the A&T process, including the release to service of repaired actuators. Key Skills: Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within an engineering/manufacturing role is essential, ideally within aerospace or related industries. Good knowledge of assembly and test manufacturing. Competent in reading and following different set procedures. Experience working within an aerospace quality system is desirable. Dynamic and proactive attitude. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : Manual Cylindrical Grinder Reporting To: Manager, Manufacturing Work Schedule: Onsite Wolverhampton, GBR At Moog Aircraft Group , were looking for a Manual Cylindrical Grinder to join our team in Wolverhampton. This is proper precision work not production grinding. Youll be working on high-spec aerospace components, where accuracy matters and the quality of your work has a real impact. Once fully trained, youll move onto a shift pattern and play a key role in keeping standards high across the shop floor. As a Manual Cylindrical Grinder, you will: Set and operate manual cylindrical grinding machines (S20/RM2500) Grind to very tight tolerances (down to 0.00005) Work from engineering drawings to achieve exact specifications Support flow plotting activities including: understanding fluid flow paths and behaviour, map and check flow routes and pressure profiles, consider thermal expansion and geometric constraints Grind components to ensure correct flow distribution and performance Carry out work that meets strict aerospace quality standards To be considered for this role, here's what you'll typically bring: Time-served apprentice (essential) 10+ years experience setting and operating manual cylindrical grinders Strong background in precision grinding to tight tolerances Confident reading drawings and working to spec Reliable, hands-on, and takes ownership of their work It would be preferred if you had: Experience in flow plotting or working with fluid-related components Understanding of fluid dynamics, pressure profiles, and flow behaviour Experience ensuring consistent flow through precision grinding Mate grinding experience Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension contribution starting at 6%, Employee Share Options. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : CNC/Manual Mate Grinder (Nights) Reporting To: Team Leader Parts Generation Work Schedule: Onsite Wolverhampton, GBR At Moog, we empower you to achieve great things in a supportive, trust-driven environment. Tackle complex challenges with a team that values integrity, collaboration, and innovation. Enjoy job satisfaction, competitive rewards, and a family-like atmosphere where your contributions matter. Grow with talented colleagues who share our passion for shaping the way our world moves. Job Summary Moog Aircraft Group is looking for an apprentice trained, experienced Manual / CNC Grinder to join the team at our facility based in Wolverhampton. At Moog we're focused on the customer and for us this means designing complex mechanical products that are often bespoke and high profile. Our Machinists work to exceptionally close tolerance, an essential requirement of the aerospace industry. Responsibilities Include Experience operating, setting Manual Studer machines S20/RM250 and operating/ setting CNC (Studer S33/S31) Capability of machining exotic and hardened materials Carry out own 1st off inspection and check/complete the necessary quality documentation Precision manual land grinding, working to achieve limits to 0.00005" Able to set and run multiple machine / processes. Night shift (includes a generous shift allowance; note: allowance is not paid during the training period ) Key Skills and experience: A recognised engineering apprenticeship Mate grinding experience required Previous experience within an engineering/manufacturing role within the aerospace industry Good knowledge of machining techniques and appropriate tooling Attention to detail and accuracy and process improvement Using the relevant inspection techniques/equipment to achieve drawing tolerance This role will require the individual to work a shift pattern, including nights and overtime when requested. The role requires the candidate to be self-certified and a quality stamp holder after qualifying period. Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: You'll have access to career progression opportunities and learning and development programs that will empower you to grow both personally and professionally. Enjoy a comprehensive Flexible Benefits Package, 33 Days Annual Leave (including Bank Holidays), Private Medical Insurance, access to mental health support and expert financial advice. You'll also benefit from free parking, access to electric car charging, Life Assurance, a Company Pension Contribution starting at 6%, Employee Share Option. You Matter at Moog Our Mission and Vision At Moog, we prioritize diversity, equity, and inclusion. We aim to create a culture where everyone is valued, respected, and given equal opportunities. We strive to empower employees to bring their authentic selves to work, celebrating our differences to foster a welcoming environment for all. Embrace the journey and explore exciting possibilities! Your CV will be stored in our central recruitment database upon applying at Moog. Note for Recruitment Agencies: We manage vacancies internally, preferring direct hiring and referrals for efficiency. When needed, we engage agencies from our Preferred Supplier List (PSL). Speculative CVs from agencies not on our PSL will not be considered, and no introduction fee will apply. TPBN1_UKTJ

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title : CNC Machinist Reporting To: Management, General Manufacturing & Operations Work Schedule: Onsite Wolverhampton, GBR Moog Aircraft Group are currently seeking a skilled CNC Machinist with proven experience operating Mazak 3-axis and 4-axis machines, including complex mill-turn applications to join our team at our Wolverhampton facility. The role involves machining high-precision components from titanium, steel, and aluminum, working to tight tolerances and quality standards in a production or aerospace/precision engineering environment. Programming is not a requirement as all shop programs are produced off-line by our Manufacturing Engineering department, but some ISO/EIA programming experience may be useful in out of hours trouble shooting but not a core requirement. Key Responsibilities Set, operate, and adjust Mazak CNC machines (3-axis and 4-axis), including mill-turn centres. Machine complex components to tight tolerances and high surface finish requirements Work with difficult and exotic materials including titanium, stainless steel, and aluminum alloys Interpret and work from engineering drawings and technical specifications Operators will not normally see a cad model in usual operating conditions. They will work with process stage sketches, tech specs and drawing references where required, using the in-house Solumina interface. Solumina experience will not need to be a requirement here though as it is easily picked up for shop use. Offsetting and tool compensation for process control is essential and some experience of speed / feed use may be preferrable for out of hours troubleshooting. Carry out first-off inspections and ongoing quality checks using a variety of measuring equipment, including CMM machinery. Identify and resolve machining or tooling issues to minimise scrap and downtime Maintain machines and work area to ensure safe and efficient operation Work to production schedules while maintaining quality and safety standards Key Skills & Experience Apprenticeship or NVQ Level 3 (or equivalent) in Engineering / CNC Machining preferred Relevant manufacturing or machining certifications advantageous Proven experience operating Mazak CNC machines Strong background in 3-axis and 4-axis machining Experience with complex mill-turn operations Confident machining titanium, steel, and aluminum Strong understanding of cutting tools, feeds, speeds, and tool life management Excellent ability to read and interpret technical drawings and GD&T Competent with precision measuring equipment (micrometers, verniers, CMM awareness) Strong attention to detail and commitment to quality Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that clearance cannot be obtained, you may not be eligible for the role, and/or any offer of employment may be withdrawn on grounds of national security. In Return Moog can offer you: A longstanding career within a culture of trust and innovation. 33 Days Annual Leave (including Bank Holidays). Benefits include Life Assurance, Company Pension Contribution beginning at 6%, and Employee Share Option in addition to an extensive Flexible Benefits Package, and Hybrid working arrangements. You Matter at Moog Our Mission and Vision At Moog, we believe in the people who work for us. As part of our investment in our people, we make diversity, equity, and inclusion a priority. Our goal is to create a culture where we value, respect, and provide fair treatment and equal opportunities for all employees. Moog aspires to be a diverse, equitable, and inclusive company where employees are empowered to bring their whole, authentic selves to work every day. By recognizing and celebrating our differences, we cultivate an environment thats the right fit for every person inside of it. It is our core belief that if we take care of our employees, they will take care of our customers, partners, shareholders, and communities where we live and work. Working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. TPBN1_UKTJ

Field Service Engineer - Fabrication & MIG Welding Covering Midlands Patch £38,000 - £42,000 basic + Overtime (Realistic total earnings £50,000) + Training + Van + Pension Do you have MIG Welding and Fabrication skills and want a field-based role covering the Midlands? Are you looking for variety, job security and a reputable employer? The company is a national business involved in waste handling and loading bay equipment. Due to winning new long-term contracts, they are looking to expand their operation in key areas of the UK. The role involves MIG Welding and Fabrication repairs of balers, compactors, dock levellers and similar equipment on behalf of established commercial and industrial clients. The bulk of your work will be around Birmingham, extending out to Shrewsbury, Gloucester and Nottingham, with occasional travel further afield. This is a great opportunity to join an expanding company during a period of sustained growth. The Role: Field Service Engineer, working on client sites across the Midlands Monday to Friday, 45 hours contracted with 50 hours guaranteed pay Overtime paid at time and a half beyond guaranteed hoursCandidate Requirements: Good fabrication skills, including MIG welding Reasonable mechanical skills Full driving licenceContact: Sebastian Petitti Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles, ranging from mid to senior level positions. Please note we can only accept applications from candidates with a valid right to work in the UK. All appointments are subject to standard reference and right-to-work checks. INDMP

Sales Executive The Role: The Sales Executive is responsible for accurately processing and administering all customer orders and enquiries and has responsibility for growing revenue from key accounts, ensuring customer needs are fully understood and met, to maximise spending across their portfolio. This role focuses on developing strong customer relationships, identifying opportunities for increased revenue, and delivering consistently high levels of service to support overall business growth. Key Responsibilities: Account Growth & Revenue Expansion Manage and develop a portfolio of key accounts to increase revenue and maximise customer spend. Proactively identify new opportunities within existing accounts, promoting the full range of BCS products and services. Achieve agreed targets for account growth, order conversion, and customer retention.Customer Relationship Management Build strong, long-term relationships with customers, ensuring their needs are understood and acted upon. Provide expert guidance on suitable products and services to support customer requirements. Ensure all customer communications are logged and visible within the system.Quotations & Opportunity Management Prepare accurate, timely quotations and collaborate with senior management on high-value enquiries. Track and follow up on all open quotations, capturing reasons for non-conversion to support continuous improvement.Order Processing & Administration Process all customer orders and requisitions accurately and promptly. Maintain communication with customers to obtain all required information for order completion. Coordinate with procurement, logistics, and stores teams to ensure successful fulfilment. Manage the shared sales mailbox to ensure all incoming orders and requests are prioritised, actioned, and visible in the system.Customer Service Deliver the highest standards of customer service across all interactions. Resolve queries and issues promptly, escalating where needed. Monitor daily deliveries, updating customers on any stock, transport, or scheduling queries. Build strong working relationships by demonstrating BCS values.Systems, Documentation & Process Compliance Ensure all order-related documents and correspondence are correctly saved in system folders. Support the returns process by raising collection paperwork and coordinating with the transport team. Investigate credit requests and provide clear feedback to management and accounts. Follow established processes and contribute suggestions for continuous improvement.HSEQ Work in line with HSEQ policies and risk assessments. Report accidents and positive interventions appropriately. Maintain safe working environments and use correct PPE where required.Key measures & targets: Hit and exceed monthly revenue and account growth targets through proactive sales in line with monthly targets Build excellent customer relationships that drive repeat business and unlock new sales opportunities to secure future orders Engage and proactively communicate with accounts consistently to generate, secure, and convert high‑value quotes within SLA guidelines Proactively review market trends and buying potential that key accounts could benefit from as an opportunity to increase revenue Timely and accurate processing of orders. Working consistently within all SLAs and KPIs. Achieve daily, weekly and monthly performance targets relating to the number of orders processed, lines worked, and total monetary value achieved. Effective management of the central mailbox. Quality and accuracy of sales documentation and credits raised. Positive internal and external customer feedback. Proactively check and manage all customer orders to prevent delays or errors, ensuring every order is delivered “on time and in full”.Key relationships: External customers and key accounts Suppliers and Distributors Internal Sales Team Procurement Logistics Stores Department Team LeadersPerson Specification: The successful candidate is likely to meet all of the following criteria: Essential Consistently achieves and exceeds sales targets through a strategic, customer‑focused approach. Strong influencing and negotiation skills, securing successful outcomes in competitive environments. Skilled in overcoming objections, building trust, and developing long‑term client relationships. Experience managing multiple accounts simultaneously while driving sustained revenue growth. Highly organised with strong administrative capabilities and excellent attention to detail. Confident using a wide range of computer systems and CRM tools with accuracy and efficiency. Able to handle high volumes of enquiries, calls, and orders while maintaining accuracy and quality of service. Excellent communication skills with a commitment to delivering outstanding customer service. Collaborative team player who works effectively with cross‑functional teams to progress and fulfil ordersDesirable Product knowledge or experience in construction or traffic management. Experience using SOP systems (e.g., Insphire).About BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

General Operative - Supplies The Role: To be responsible for warehouse duties including picking, packing and shipping of customer orders. Receiving orders into the depot and restocking the warehouse. Complete audits as requested and contribute to the annual stock check. Assist with loading delivery drivers and daily courier service. Working as part of the supplies operations team and providing full operational support to all areas of the business. Key Responsibilities: Customer orders Complete the picking of customer orders as instructed by the department management team. Ensure stock is accurately picked using picking lists issued from the system, from warehouse locations and goods for order bays. Orders are to be packed securely and moved to the relevant transport bays. Forward order bays must be checked daily and orders moved across to driver bays as required.Branded Clothing Process branded clothing orders using heat seal equipment and heat seal stock as requested on picking lists. Pick stock as required for embroidery and pack for delivery to embroidery supplier on allocated delivery day. Transfer embroidered stock received in the depot to relevant driver bays as per the paperwork supplied by the Team Leader.Other Duties Assist with customers arriving for collections. Complete driving jobs where required, including deliveries to customers and collections from suppliers. Load vehicles daily, checking the goods against the daily routing paperwork to ensure all orders allocated are loaded onto the correct drivers and courier delivery drivers. Receive and sign for orders delivered to the Depot. Complete checks for goods received to the supplier paperwork for accuracy. All damaged stock received, and stock discrepancies to be reported to the Depot Management and Procurement Team immediately. Transfer stock from the goods in bays to warehouse locations and the Safety Department goods in bay throughout the day. Paperwork to be handed to the office to complete the booking in procedure. All goods received for customer orders to be stocked in correct goods for order bays. Assist other departments with operational work during busy periods as required, specifically but not limited to the signs department.Commercial Maintain accurate stock levels within the system by ensuring orders are picked accurately. Report stock issues and highlight where customer orders could potentially be delayed. Complete stock audits as requested, feeding back to the Depot Management Team and Business Support Team. Support the business during annual stock checks.Quality Ensure works are carried out in accordance with processes. Contribute to continuous improvement by providing suggestions and feedback to Management. Work to agreed timescales updating the Depot Management Team on progress. Maintain good communication with colleagues and Management at all times. All orders are to be wrapped, banded and packaged as per delivery method.HSEQ Complete tasks in accordance with risk assessments, notify the Depot Management Team of any potential noncompliance. Report accidents and Positive Interventions using the correct methods. Ensure the correct PPE is used in the depots at all times. Maintain excellent levels of housekeeping, ensure areas are free from waste and trip hazards etc. Identify/Submit positive interventions where needed. Work in conjunction with HSEQ policies and procedures.Key measures & targets: Quality of stock locations, transport bays and yard area The number of stock issues and picking errors Waste reductionKey relationships: Depot Management Team Bescot Operations Team Logistics Team and DriversPerson Specification: The successful candidate is likely to meet all of the following criteria: Essential Previous warehouse experience Attention to detail and ability to follow procedures Ability to work well within a team, offering support to others Product knowledge of site supplies, PPE, traffic management and signage Ability to maintain a clean organised work area and values the importance of good housekeeping in maintaining a safe, efficient environment Works well and maintains standards and values when under pressure.Desirable Computer literate Heatseal and product branding experience Forklift licence Driving licenceAbout BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety and construction products and services that has depots in both the Midlands and Scotland. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Flexible working arrangements Annual salary review Continuous service awardsHow to apply: Please send your current CV and cover email outlining your suitability for the role and quoting the reference number to

Quality Manager The Role: The Quality Manager is responsible for quality assurance, quality control, compliance, and continuous improvement. The role ensures all products, services, and processes meet statutory, client, and company requirements. This position holds technical authority on quality matters, including the right to stop works, reject products, and escalate risks. Key Responsibilities: Quality Monitoring Manage IMS: Maintain and develop the integrated management system in line with ISO 9001, ISO 14001, and ISO 45001. Ensure Compliance: Meet legal and industry standards including BS EN 1090, ISO 3834, LOLER, and PUWER. Support Accreditations: Develop and implement BCS quality processes, standards, and certifications. Conduct Inspections: Perform frequent internal quality checks and inspections on manufactured products. Audit Supply Chain: Conduct supplier audits to ensure incoming products adhere to quality standards. Oversee Calibration: Manage the calibration standards and systems across the business. Troubleshoot Issues: Investigate, troubleshoot, and resolve product and production defects.Business Improvements Drive Efficiency: Examine ways to improve production, streamline operations, and boost efficiency. Support Projects: Partner with the Project Manager to implement business-wide improvements. Introduce Innovation: Bring new quality practices and innovations into the business.Complaints & SLAs Manage Complaints: Ensure all complaints are investigated and closed out within the 5-day SLA. Lead investigations for quality incidents and non-conformances (NCP) Apply CAPA: Put strict corrective and preventative measures in place to prevent repeat defects.Fabrications Maintain Standards: Assist the team with obtaining and maintaining divisional accreditations. Audit Pre-Delivery: Verify welding procedures (WPS/WPQR), welder qualifications, material traceability, and coatings. Develop ITPs: Create contract-specific Inspection & Test Plans to meet customer needs. Compile Handovers: Ensure the accurate compilation of quality documentation and Manufacturer's Data Records (MDRs). Escalate Risks: Support the Head of Fabrications by flagging concerns and agreeing on remedial actions.Plant Hire & Equipment Compliance Enforce Regulations: Ensure all plant, lifting equipment, and safety assets comply with LOLER and PUWER. Manage Test Regimes: Oversee inspection and certification schedules for gas detection and site safety gear. Control Traceability: Maintain flawless asset traceability and certification records.Leadership & Management Conduct 1-to-1s: Hold regular catchups and annual PDRs with direct reports to track performance. Develop Talent: Manage quality personnel, set clear objectives, and support professional growth. Foster Culture: Promote a "right-first time" culture of quality and compliance across all teams.Quality Ensure works are carried out in accordance with processes. Contribute to continuous improvement by providing suggestions and feedback to Team Leaders and Management. Work to agreed timescales updating the Team Leader on progress. Maintain good communication with Team Leaders and Management at all times.HSEQ Complete tasks in accordance with risk assessments, Report accidents and Positive Interventions using the correct methods. Identify/Submit positive interventions where needed. Work in conjunction with HSEQ policies and procedures.Key measures & targets: Process Reviews: Regular evaluations of business-wide processes. SLA Closure: NCPs and complaints closed within 5 working days. Defect Reduction: Measurable decrease in repeat defects and rework. Audit Performance: High compliance scores and successful external certification audits. Right-First-Time: Continuous improvement in first-pass quality metrics. Supplier Quality: High performance scores from supply chain vendors.Key relationships: BCS & Barhale Quality teams Plant & Hire service teams Fabrications & Operations teams BCS Senior Management Team Head of QualityPerson Specification: The successful candidate is likely to meet all of the following criteria: Essential System Knowledge: Strong working knowledge of ISO 9001, ISO 14001, and ISO 45001. Leadership Experience: Proven track record in a quality leadership role within fabrication, manufacturing, or engineering. Technical Standards: Deep understanding of EN 1090, ISO 3834, LOLER, and PUWER. Audit Management: Strong experience managing audits, NCP and CAPA processes. Soft Skills: Excellent communication, influencing, problem-solving, and attention to detail. IT Literacy: High level of proficiency in standard IT tools and systems. Adaptability: Flexibility and willingness to adapt to different tasks and projectsDesirable Specialist Systems: Knowledge of ISO 50001 energy management systems. Qualifications: Educated to degree level with an Internal Auditor qualification. Professional Membership: Membership of the Chartered Quality Institute (CQI) or similar body. Industry Background: Prior experience working within a manufacturing environment.About BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

Warehouse Manager The Role: To lead the safe, efficient and compliant operation of the warehouse, ensuring the effective receipt, storage, control and dispatch of stock and customer orders. The role is responsible for supporting both the distribution function and sign manufacturing business unit by ensuring inventory accuracy and high standards of customer service. Key Responsibilities: Warehouse Operations Manage all goods in, storage, stock control, picking, packing and dispatch activities. Ensure customer orders are accuratly picked, packed and dispatched to meet agreed delivery dates and service levels. Oversee the receipt of supplier deliveries, ensuring stock is checked, booked in and stores in the correct location. Maintain inventory accuracy thorugh regular stock checks, audits and investigation of stock discrepncies. Support the TM and Commercial Sign Manufacturing operation by ensuring the availability and movement of raw materials, components and finishe dproducts. Ensure the safe loading and unloading of vehicles and effective management of warehouse space, equipment and resources. Identify and implement operational improvements to increase efficiency, productivity and customer satisfaction.Team Leadership and Management Lead, motivate and develop warehouse personnel to achieve operational and business objectives. Plan and allocate resources to meet workload demands and service requirements. Conduct regular team meetings, performance reviews and return to work discussions. Identify training and development needs to ensure competence across all warehouse activities. Promote a positive culture of accountability, teamwork, continuous improvement and employee engagement. Manage departmental costs and resource in line with budgets and business targets. Protect company assets and maintain security of stock, facilities and equipment.Quality Ensure high standards of quality, accuracy and service are maintained across all warehouse processes. Accountable for inventory accuracy and order fulfilment performance. Investigate stock issues, customer complaints and process failures, implementing corrective actions where required. Support continuous improvement initiatives to enshance product quality, operational performance and customer experience. Maintain high standards of house keeping and workplace organization. Ensure compliance with company quality procedures and support internal and external audits.HSEQ Lead by example in promoting positive HSEQ culture. Ensure compliance with all relevant legislation, company policies, risk assessments, safe systems of work and operational procedures. Maintain and review RAMs, risk assessments and control measures relevant to warehouse activities. Investigate accidents, incidents and near misses, identifying root causes and implementing corrective actions. Conduct workplace inspections, audits and safety briefings, ensuring actions are completed within agreed timescales. Support environmental, quality and sustainability initiatives, including ISO management systems and carbon reduction objectives. Work closely with the HSEQ team to drive continuous improvement, share best practice and maintain compliance across the business.Key measures & targets: Warehouse operational performance Stock accuracy and inventory control Customer order fulfilment and on time dispatch Team performance, development and engagement HSEQ compliance and continuous improvement Security of assets, stock and facilityKey relationships: Signs Supervisor Warehouse Team Sales Team Operations Manager Logistics SupervisorPerson Specification: The successful candidate is likely to meet all the following criteria: Essential Previous experience of managing a warehouse operation. Commercially aware Computer literate Attention to detail and ability to follow procedures.Desirable Industry knowledge Full UK Driving LicenseAbout BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety and construction products based in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

Senior Quantity Surveyor The Role: BCS are seeking a Senior Quantity Surveyor to work with its fabrications team. The fabrications team delivers a variety of steelwork projects supporting major infrastructure works both within our group of companies and for external clients. The role will cover traditional quantity surveying activities and see you demonstrating your commercial acumen, by identifying, recording, tracking and realising commercial opportunities, whilst mitigating business risk. Key Responsibilities: Commercial Strategy & Profitability Drive the commercial management of projects to maximise profitability, monitor margin performance, identify risks and opportunities, and implement corrective actions where necessary. Cost and Value Reporting The preparation of monthly cost and value reports encompassing detailed forecasts and analysis of expected resource utilization, cashflow forecasts and risk and opportunities assessments. Contract Review and Administration The review of contracts to identify risks and suitability for acceptance and the administration of live contracts to ensure all notice requirements are met, full entitlements to payments and changes to contract sums are secured, and final accounts are signed off. Where appropriate support the resolution of commercial disputes through effective contract administration, negotiation and evidence-based submissions. Process Improvements Proactively work with the team to identify efficiencies in commercial processes and ways of working, propose and implement changes based on improvements identified. Record Keeping Ensure accurate records are kept of site activities and works delivered to ensure that variances from tender expectations are understood and all contract entitlements to additional payment are supported, Supply Chain Management The negotiation, placement and management of subcontracts ensuring procurement and administration in line with company processes. Risk Management Lead the identification, assessment and management of commercial risks and opportunities throughout the project lifecycle, maintaining appropriate risk registers and mitigation plans. Key measures & targets: The timely issue of all contractual notices and monthly reports, the full recovery of any contractual entitlements, supporting the team to deliver projects in line with tender expectations, the provision of accurate reconciliations and forecasts. Key relationships: The role will report of the Head of Commercial but will work closely with the Business Unit Director, Head of Fabrications and Head of Finance. Person Specification: The successful candidate is likely to meet all of the following criteria: Essential Previous experience in fabrications Familiarity with IChemE/ NEC forms of contract and knowledge and understanding of Construction Law Previous experience in commercial management and procurement of subcontractors, including chairing regular meetings, measurement and control cycle, certificates, and accruals calculations Demonstrable experience in monthly forecasting and cost analysis. Excellent communication, numeric and computer literacy skills, proficient in Microsoft Office Excellent organisation and time management skills, with the ability to work effectively under tight deadlinesDesirable Member of RICS or other relevant professional body CSCS card HND/degree (or equivalent) in Quantity Surveying Demonstrable knowledge and experience in estimation Experience working for a direct delivery contractorAbout BCS Group: BCS Group, a subsidiary of Barhale Holdings Plc, is a privately owned company. We are a leading supplier of safety in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

Sales Executive Walsall The Role: The Sales Executive is responsible for accurately processing and administering all customer orders and enquiries and has responsibility for growing revenue from key accounts, ensuring customer needs are fully understood and met, to maximise spending across their portfolio. This role focuses on developing strong customer relationships, identifying opportunities for increased revenue, and delivering consistently high levels of service to support overall business growth. Key Responsibilities: Account Growth & Revenue Expansion Manage and develop a portfolio of key accounts to increase revenue and maximise customer spend. Proactively identify new opportunities within existing accounts, promoting the full range of products and services. Achieve agreed targets for account growth, order conversion, and customer retention. Customer Relationship Management Build strong, long-term relationships with customers, ensuring their needs are understood and acted upon. Provide expert guidance on suitable products and services to support customer requirements. Ensure all customer communications are logged and visible within the system. Quotations & Opportunity Management Prepare accurate, timely quotations and collaborate with senior management on high-value enquiries. Track and follow up on all open quotations, capturing reasons for non-conversion to support continuous improvement. Order Processing & Administration Process all customer orders and requisitions accurately and promptly. Maintain communication with customers to obtain all required information for order completion. Coordinate with procurement, logistics, and stores teams to ensure successful fulfilment. Manage the shared sales mailbox to ensure all incoming orders and requests are prioritised, actioned, and visible in the system. Customer Service Deliver the highest standards of customer service across all interactions. Resolve queries and issues promptly, escalating where needed. Monitor daily deliveries, updating customers on any stock, transport, or scheduling queries. Build strong working relationships by demonstrating BCS values. Systems, Documentation & Process Compliance Ensure all order-related documents and correspondence are correctly saved in system folders. Support the returns process by raising collection paperwork and coordinating with the transport team. Investigate credit requests and provide clear feedback to management and accounts. Follow established processes and contribute suggestions for continuous improvement. HSEQ Work in line with HSEQ policies and risk assessments. Report accidents and positive interventions appropriately. Maintain safe working environments and use correct PPE where required. Key measures & targets: Hit and exceed monthly revenue and account growth targets through proactive sales in line with monthly targets Build excellent customer relationships that drive repeat business and unlock new sales opportunities to secure future orders Engage and proactively communicate with accounts consistently to generate, secure, and convert high‑value quotes within SLA guidelines Proactively review market trends and buying potential that key accounts could benefit from as an opportunity to increase revenue Timely and accurate processing of orders. Working consistently within all SLAs and KPIs. Achieve daily, weekly and monthly performance targets relating to the number of orders processed, lines worked, and total monetary value achieved. Effective management of the central mailbox. Quality and accuracy of sales documentation and credits raised. Positive internal and external customer feedback. Proactively check and manage all customer orders to prevent delays or errors, ensuring every order is delivered "on time and in full". Key relationships: External customers and key accounts Suppliers and Distributors Internal Sales Team Procurement Logistics Stores Department Team Leaders Person Specification: The successful candidate is likely to meet all of the following criteria: Essential Consistently achieves and exceeds sales targets through a strategic, customer‑focused approach. Strong influencing and negotiation skills, securing successful outcomes in competitive environments. Skilled in overcoming objections, building trust, and developing long‑term client relationships. Experience managing multiple accounts simultaneously while driving sustained revenue growth. Highly organised with strong administrative capabilities and excellent attention to detail. Confident using a wide range of computer systems and CRM tools with accuracy and efficiency. Able to handle high volumes of enquiries, calls, and orders while maintaining accuracy and quality of service. Excellent communication skills with a commitment to delivering outstanding customer service. Collaborative team player who works effectively with cross‑functional teams to progress and fulfil orders Desirable Product knowledge or experience in construction or traffic management. Experience using SOP systems (e.g., Insphire). We are a leading supplier of safety in the Midlands. We pride ourselves on providing a first-class service to all our customers, ensuring the right product or solution is delivered to the right location on time. With over 5,000 items within our core range, BCS Group can fulfil any order and ensure it is delivered directly via our dedicated transport fleet or those of our partners. Manufacturing: Our capabilities include standard and bespoke signage, labels, temporary and permanent road traffic signs and bespoke steel fabrication/installation which includes footbridges, walkways, flooring, guardrails, ladders and tunnelling products. Extensive Stock Range: Distributor of leading industry brands in PPE & clothing, traffic management, safety & lifting and site equipment products. These include Bollé, Pulsar, Globus, Rock Fall, Progarm, Portwest, Melba Swintex, Oxford Plastics, JSP, Nissen, Carters, Orafol, Crowcon, Radiodetection, Dräger, Ridgegear, and Plant Nappy. Safety Equipment Servicing: Specialist safety & lifting repair, calibration and inspection since 1999. We have our own purpose-built maintenance and calibration facility for gas detection, cable avoidance, breathing apparatus and lifting equipment which along with our fully equipped mobile calibration unit is where all maintenance and repairs are carried out. Our staff are trained and fully qualified in the maintenance, calibration and inspection of a full range of specialist safety & lifting equipment. Our People: With a direct workforce philosophy, the company culture is driven by our core values, which describe how we act day-to-day. We ensure all your needs are met through our national call centre and dedicated account management. Triple Accreditation: ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2011 standards, which means our customers can have complete confidence that we have an ongoing commitment to be a safe, efficient and responsible partner. Caring and investing in you As a Gold Investors in People company and a Sunday Times 100 Best Company to Work For, we are committed to investing in people. We are passionate about creating a working environment where people are supported throughout their careers, where people can enjoy security and be part of a company that cares about them. From the moment you join us, your well-being and career aspirations will be supported by. Competitive salary Company Pension Life Assurance Private Medical 25 days annual leave in addition to 8 public bank holidays and loyalty days 8 hours volunteering Employee Assistance Programme to support your mental, physiological, and financial well-being. Flexible benefits via salary sacrifice Company car/green car scheme/car allowance/Van (dependent on position) Leadership & management training and coaching Regular line management engagement and appraisal to support your career progression. Development supported by internal and externally delivered training. Continuous service awards

Job description Job responsibilitiesThe successful individual will be expected to carry out all functions in all of the Operations Role Family outlined in Government Security Profession Career Framework, including:MonitoringMonitor, triage and investigate security alerts on protective monitoring pl

Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. National Security at BAE Digital Intelligence

Pipeline Excellence & ForecastingBuild and manage a robust pipeline through strategic opportunity identificationOrchestrate complex, multi-stakeholder sales cycles typical of government procurementDeliver accurate forecasting in alignment with fiscal year and departmental budget cyclesEcosystem Orch

Chubb Fire and Security is seeking an accomplished UK Sales Director to lead our commercial sales function and own sales, business development, and account management strategy across the UK.

A leading national provider of security & event services seeks a Business Development Manager to spearhead sales across the UK.

UK Telecoms Lab (UKTL) is seeking a Telecoms Architect to shape security research and testing for the UK's telecoms ecosystem.

UKTL is recruiting for a technically curious role at the National Physical Laboratory (NPL) in partnership with UKTL’s telecoms testing facilities. The role focuses on cybersecurity, telecoms technologies, and emerging networking concepts, with emphasis on learning through hands-on work.

Referrals increase your chances of interviewing at Nexus National Security Network by 2x. Nexus National Security Network provided pay range. This range is provided by Nexus National Security Network.

A leading security services provider in the UK is seeking an experienced Account Manager to manage the prestigious Peel portfolio. This role involves leading over 80 security professionals, ensuring operational excellence across various sites. The ideal candidate will have multi-site security manage

National Physical Laboratory is seeking an entry-level Telecoms Standards Associate to support international telecom standards discussions and contribute to secure-by-design network efforts. The role offers opportunities to develop technical expertise, participate in small projects, and work across

You’ll shape security research roadmaps, mentor teams, and collaborate with researchers, engineers, and vendors to advance cutting-edge telecoms capabilities.

Experis - ManpowerGroup is seeking a Data Science Consultant for their Defence & National Security team in the UK. This is a unique opportunity to contribute to high-impact projects critical for National Security.

National Physical Laboratory (NPL) seeks a professional to shape the future of telecom security. In this role, you will represent UKTL internationally and influence standards that strengthen security and resilience in telecom networks. The ideal candidate will have a strong understanding of telecom

Forward Role is seeking a Backend Software Engineer for a national security focused project in Hampshire.