Test engineer jobs in BradfordCrear alertas

RF Electronics Engineer Location: Bradford + Hybrid Work from Home Salary: Up to £70,000 DOE KO2 is working exclusively with a technology-driven client based in Bradford who are looking to strengthen their engineering team with an experienced RF Electronics Engineer. This is an excellent opportunity to work on high-performance RF designs used in cutting-edge electronic systems. The successful candidate will be joining a medium sized, multidisciplinary engineering team and join at an exciting teams as our client has several new projects due to kick off in early 2026. The Role As an RF Electronics Engineer, you will be responsible for the design, simulation, testing, and validation of RF circuits and subsystems operating across 6GHz to 18GHz. You’ll play a key role in taking concepts from initial architecture through to production, working closely with PCB layout engineers, system engineers, and external test houses. Key Responsibilities • Design, analyse, and optimise RF circuits and subsystems including LNAs, PAs, mixers, filters, oscillators, and synthesisers, • Develop RF front-end architectures and contribute to system-level design decisions, • Perform RF simulation and modelling using industry-standard tools such as Keysight ADS, AWR Microwave Office, CST, and HFSS, • Conduct S-parameter analysis, tolerance analysis, and design for manufacturability, • Create and execute RF test plans, verification procedures, and acceptance testing, • Troubleshoot complex RF issues at component, PCB, and system level, • Correlate lab measurements with simulation results and drive design improvements, • Support EMC, EMI, and RF compliance, certification testing, and regulatory engagement, • Collaborate closely with PCB layout engineers on controlled impedance routing, grounding, shielding, and stack-up selection, • Integrate RF hardware into larger mixed-signal and digital systems, • Produce clear technical documentation and contribute to design and architecture reviews Skills & Experience Required • Strong theoretical grounding in electromagnetics, RF propagation, transmission line theory, and impedance matching, • Proven experience designing RF circuits across microwave frequency bands (6GHz–18GHz), • In-depth knowledge of linearity, noise figure, phase noise, intermodulation, and spectral purity, • Hands-on experience with RF test equipment including VNAs, spectrum analysers, signal generators, power meters, and noise figure analysers, • Skilled in designing transmit RF chains, • RF PCB layout knowledge including controlled impedance routing, grounding strategies, shielding, and isolation, • Experience with multilayer PCB stack-ups and substrates such as FR-4 and Rogers, • Familiarity with wireless standards such as LTE, 5G, Wi-Fi, and Bluetooth, • Working knowledge of Python, MATLAB, or LabVIEW for RF analysis and test automation, • Structured approach to documentation, version control, and reporting Why Apply? • Work on technically challenging RF designs, • Join a stable and forward-thinking engineering team, • Opportunity to influence system-level architecture and design decisions Apply today or contact KO2 Embedded Recruitment Solutions for more information.

Graduate Electronic Engineer Location: Bradford Salary: £28,000 - £30,000 Overview: Our Client based in Bradford provide enabling technologies for industrial growth markets. We have evolved from a company that was primarily focused on aerospace and defence, to one that serves multiple markets that require advanced technology and high reliability. Responsibilities: • As a Electronic Test Engineer you’ll be involved in the design of electronic and RF circuits as part of a multi-functional team, • Documentation and presentation of designs, • Transfer of products from Engineering to Production, • Production documentation and technical reports, • Maintain a high standard of product documentation and design logbooks, including preparation for design reviews., • Contribute to design and project reviews and liase with other departments, • Compile regular progress reports and technical reports, both verbal and written, • Contribute to regular Daily Stand-Up Meetings, • Communicate verbally and using presentations to peers, managers and junior staff, • Foster and maintain good customer and supplier relations, • Provide production support and fault-finding, • Training of Test Technicians and Senior Technicians/Technicians, • Plan, implement and coordinate own activities against objectives set by management, • Meet project timescales, • Assist with customer returns, • Any other reasonable duties as directed by a member of management, • Identify continuous improvements in both product design, processes, yield and performance margins Career Path and Training: • Our Client have a well-defined Engineering Grading Structure through where you can develop, • They provide RF training to equip their employees with the appropriate skills tailored to our business, • They encourage and assist in your journey to Chartered Engineer

Job Title: Software QA Engineer Location: Bradford BD3 7DL, United Kingdom Employment Type: Contractor (with potential for permanent onboarding after 6 months) Work Schedule: Full-time, 5 days in the office Job Summary We are seeking a skilled and detail-oriented Software QA Engineer with hands-on experience in software testing. The ideal candidate will have 3+ years of experience in software quality assurance, with a preference for those who have worked in the retail industry. This role requires working on-site at our UK location, collaborating with **vendors, customers, project and program managers, and the QA manager The QA Engineer will be responsible for both manual testing and supporting test automation (if applicable). The role involves working in an Agile environment, ensuring the highest software quality standards, managing defects, and improving testing processes. Strong communication and basic management skills are required to coordinate effectively with internal teams and external partners. Key Responsibilities • Design, develop, and execute test plans and test cases based on software requirements., • Identify, document, and track software defects using industry-standard tools., • Assist in maintaining test environments, test data, and testing tools., • Support test automation efforts where applicable (automation experience is an advantage but not a must)., • Perform API testing, database validation, and ensure compliance with best testing practices., • Communicate test progress, results, and risks to project stakeholders and management., • Ensure adherence to QA processes, industry standards, and company best practices. Required Qualifications & Skills • 3+ years of hands-on experience** in Software Quality Assurance., • Strong defect management, troubleshooting, and root cause analysis skills., • Cloud experience (AWS, Azure, GCP) is an advantage** but not mandatory., • Basic management skills, including coordination with multiple stakeholders., • Excellent communication skills** to work effectively with vendors, customers, and internal teams. Preferred Qualifications • Familiarity with CI/CD pipelines and DevOps practices in testing.

Elevation Recruitment Group are working with a manufacturer in Bradford to recruit a Multi Skilled Maintenance Engineer (Electrical Bias). Multi-Skilled Maintenance Engineer (Electrical Bias). Salary: £38,000 - rising to £40,000 after 6 month probation. DAYS ONLY + on call rota 1 week in 4. Benefits: • 22 days annual leave plus bank holidays, • 1.5 x overtime Duties of the Multi Skilled Maintenance Engineer include: • Measure the performance of mechanical components, devices and machines, • Carry out preventative and reactive electrical maintenance across machinery, • Maintain and modify equipment to ensure that it is safe, reliable and efficient, • Monitor and commission plant, machinery and systems, • Troubleshoot and resolve electrical faults quickly to minimise downtime, • Fault finding, • Undertake test procedures, • Provide technical advice, • Recommend modifications to the production machines, • Repair, service and maintain equipment, • Respond to emergency breakdowns promptly We want to speak with Multi Skilled Maintenance Engineers with the following: • NVQ Level 3 or above in Electrical Engineering, • Previous experience in manufacturing environments, • Proficient with PLCs, • Strong fault finding skills Our client is looking for someone with experience working on large scale production machinery, who can work under pressure and has a high level of technical knowledge with the ability to apply this knowledge to practical problems. Apply now, or for a further discussion about this Multi Skilled Maintenance Engineer role, please contact Eleanor Crummey.

This role is responsible for both research and development prototype testing and customer witness testing. The Role * Rigorously test new product lines (and components where necessary) to both industry and in-house standards to ensure they are robust and fit for purpose pr.

Graduate Electronic Test Technician Location: Bradford Salary: £28,000 - £30,000 Overview: Our Client based in Bradford provide enabling technologies for industrial growth markets. We have evolved from a company that was primarily focused on aerospace and defence, to one that serves multiple markets that require advanced technology and high reliability. Responsibilities: • As a Electronic Test Technician you’ll be involved in the design of electronic and RF circuits as part of a multi-functional team, • Documentation and presentation of designs, • Transfer of products from Engineering to Production, • Production documentation and technical reports, • Maintain a high standard of product documentation and design logbooks, including preparation for design reviews., • Contribute to design and project reviews and liase with other departments, • Compile regular progress reports and technical reports, both verbal and written, • Contribute to regular Daily Stand-Up Meetings, • Communicate verbally and using presentations to peers, managers and junior staff, • Foster and maintain good customer and supplier relations, • Provide production support and fault-finding, • Training of Test Technicians and Senior Technicians/Technicians, • Plan, implement and coordinate own activities against objectives set by management, • Meet project timescales, • Assist with customer returns, • Any other reasonable duties as directed by a member of management, • Identify continuous improvements in both product design, processes, yield and performance margins Career Path and Training: • Our Client have a well-defined Engineering Grading Structure through where you can develop, • They provide RF training to equip their employees with the appropriate skills tailored to our business, • They encourage and assist in your journey to Chartered Engineer

RF Electronics Engineer Location: Bradford Salary: Up to £70,000 DOE KO2 is working exclusively with a technology-driven client based in Bradford who are looking to strengthen their engineering team with an experienced RF Electronics Engineer. This is an excellent opportunity to work on high-performance RF designs used in cutting-edge electronic systems. The successful candidate will be joining a medium sized, multidisciplinary engineering team and join at an exciting teams as our client has several new projects due to kick off in early 2026. The Role As an RF Electronics Engineer, you will be responsible for the design, simulation, testing, and validation of RF circuits and subsystems operating across 6GHz to 18GHz. You’ll play a key role in taking concepts from initial architecture through to production, working closely with PCB layout engineers, system engineers, and external test houses. Key Responsibilities • Design, analyse, and optimise RF circuits and subsystems including LNAs, PAs, mixers, filters, oscillators, and synthesisers, • Develop RF front-end architectures and contribute to system-level design decisions, • Perform RF simulation and modelling using industry-standard tools such as Keysight ADS, AWR Microwave Office, CST, and HFSS, • Conduct S-parameter analysis, tolerance analysis, and design for manufacturability, • Create and execute RF test plans, verification procedures, and acceptance testing, • Troubleshoot complex RF issues at component, PCB, and system level, • Correlate lab measurements with simulation results and drive design improvements, • Support EMC, EMI, and RF compliance, certification testing, and regulatory engagement, • Collaborate closely with PCB layout engineers on controlled impedance routing, grounding, shielding, and stack-up selection, • Integrate RF hardware into larger mixed-signal and digital systems, • Produce clear technical documentation and contribute to design and architecture reviews Skills & Experience Required • Strong theoretical grounding in electromagnetics, RF propagation, transmission line theory, and impedance matching, • Proven experience designing RF circuits across microwave frequency bands (1GHz–18GHz), • In-depth knowledge of linearity, noise figure, phase noise, intermodulation, and spectral purity, • Hands-on experience with RF test equipment including VNAs, spectrum analysers, signal generators, power meters, and noise figure analysers, • Skilled in designing transmit RF chains, • RF PCB layout knowledge including controlled impedance routing, grounding strategies, shielding, and isolation, • Experience with multilayer PCB stack-ups and substrates such as FR-4 and Rogers, • Familiarity with wireless standards such as LTE, 5G, Wi-Fi, and Bluetooth, • Working knowledge of Python, MATLAB, or LabVIEW for RF analysis and test automation, • Structured approach to documentation, version control, and reporting Why Apply? • Work on technically challenging RF designs, • Join a stable and forward-thinking engineering team, • Opportunity to influence system-level architecture and design decisions Apply today or contact KO2 Embedded Recruitment Solutions for more information.

At Modine, we are Engineering a Cleaner, Healthier World™. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air quality and conserve natural resources. Our Airedale by Modine brand is a world leader in the design and manufacture of innovative thermal management solutions for data centers, clean rooms, hospitals, universities, and other mission-critical environments. Trusted as The Critical Cooling Specialists, Airedale by Modine has decades of experience providing efficient, flexible end-to-end cooling solutions that work smarter, not harder, to deliver more cooling for less power. With manufacturing facilities in Canada, Spain, the UK, and the U.S., we’re scaling up across the world to support an ever-growing demand for our solutions. That’s where you come in…. The Opportunity Due to continued expansion and company growth an excellent opportunity has arisen for a Senior Electrical Design Engineer to work as part of the Research & Development Department based in Leeds reporting to the Principal Electrical Engineer. It involves working closely with a team of mechanical, controls, manufacturing and quality engineers to design and develop new standard HVAC products whilst maintaining the existing product portfolio. The role consists of working with the Product Development teams to develop new electrical product designs in accordance with APQP (Advanced Product Quality Planning) and relevant SOM guidelines from concept through to full product launch. You will aid the Principal Electrical Engineer & Lead Mechanical Engineers where necessary and as a team will be responsible for creating design briefs for companywide approval, hitting cost targets, designing electrical infrastructure of products with customer, manufacturing and assembly in mind to allow labour targets, project timescales, technical features, training and all critical deliverables to be met. You will be required to work closely with the Product Development Controls team to bring the electrical and controls design to fruition and support changes to the current portfolio. Role Requirements: • Responsible for improving the electrical aspects of product innovation and customer focus of Airedale by Modine standard products., • Assist in formulating unit electrical design and controls operation briefs for approval., • Ensure electrical aspects of new components are properly tested prior to introduction., • Oversee electrical build, wiring best practice, test and approval of prototypes., • To ensure appropriate standards and approvals and testing is carried out (i.e. EMC testing)., • To conduct product introduction support and training., • To ensure the appropriate design modifications are released informing all concerned of engineering changes., • Carry out electrical design on a range of HVAC systems, for both new and existing ranges, ensuring safe operation and compliance with relevant legislation., • Selection/sizing of appropriate electrical components, motors, cabling etc. using engineering design calculations and best practice., • Communicate internally at all levels to provide technical advice or suggestions for improvement to design., • Communicate with internal customers to provide product technical advice/support, • Attend site meetings and trade shows where required., • Build standard electrical CAD drawing generators, symbol libraries and circuits using AutoCAD software., • Produce accurate parts lists., • Design control panel layouts., • Design terminal lists and layouts., • Assist & liaise with mechanical and controls engineers. Required Qualifications & Experience • Hold a technical degree and have 5+ years experience with electrical design, preferably within the HVAC or Machine design sector, although all experience will be considered., • Must be able to innovate and be able to support ideas through to implementation., • Knowledge of UKCA and CE marking process., • Knowledge/understanding of PLC controllers., • Experience with both 3 phase power circuits & low voltage control circuits., • Experience with HVAC application and knowledge of cooling and heating systems (Not essential)., • Ability to source appropriate components., • Knowledge and awareness of current legislation affecting electrical design and testing., • Ability to work pro-actively, using own initiative., • Be able to produce high quality accurate information with good attention to detail., • Ability to work to deadlines., • Strong team working skills., • Have good written & communication skills. Experience of the following software would be advantageous • Electrical CAD Software (i.e. Promis-e / AutoCAD Electrical), • AutoCAD (2D Modelling), • Solid Edge (3D Modelling), • Microsoft Word, Excel, Outlook In Return we Offer • Competitive Salary, • Employer Contributory pension of 7% and Employee 1%, • 25 days holiday plus bank holidays and the opportunity to purchase a further 3 days through salary sacrifice scheme., • Airedale rewards discounts on shopping vouchers and days out.

A great opportunity has arisen for an experienced test engineer to join a leading manufacturing company who will be shortly opening a state of the art test centre ensuring they are leading the way in manufacturing excellence. Conduct all test activities in line with established Health & Safety regul

As a Electronic Test Engineer you'll be involved in the design of electronic and RF circuits as part of a multi-functional team. Our Client have a well-defined Engineering Grading Structure through where you can develop. They encourage and assist in your journey to Chartered Engineer.

We're looking for a skilled Electrical Test & Inspection Engineer with a passion for safety, quality, and excellence. Electrical Test & Inspection Engineer. As a Field-Based Engineer within our Properties Team, you'll play a key role in ensuring the safety, quality, and compliance of our sites.

The ideal candidate will have experience with transformer and power generator testing, excellent communication skills, and be self-motivated to meet tight deadlines.

A leading engineering firm in Bradford is looking for a Graduate Electronic Engineer to design electronic and RF circuits. This role offers a salary of £28,000 to £30,000 and emphasizes professional development, including support towards becoming a Chartered Engineer.

Futures are working with an established electronics business in West Yorkshire in their search for a Principal Electronics Engineer. This role will play a key part in shaping the technical direction of both new product development and existing product enhancement, within a business supplying complex solutions into major corporate customers. As Principal Electronics Engineer, you will balance hands-on electronic design with technical leadership, supporting and guiding a small but developing engineering team. The role is predominantly hardware-focused, but you will retain involvement in embedded software and firmware development, making it ideal for an engineer who enjoys technical breadth alongside responsibility. Principal Electronics Engineer – Role & Responsibilities – Electronics / Hardware / PCB / Embedded / RF Take technical ownership of multiple electronics projects, including new designs and legacy product updates Deliver hardware solutions to agreed timescales and commercial constraints Design, develop and test electronic circuits, schematics and PCB layouts Maintain involvement in embedded firmware, including hands-on coding where required Provide technical guidance and mentorship to junior and mid-level engineers Collaborate closely with cross-functional teams to support product delivery Principal Electronics Engineer – Skills & Experience – Electronics / Hardware / PCB / Embedded / RF Degree qualified in Electronic Engineering, Electrical Engineering or a related discipline Strong experience in PCB schematic capture, layout and hardware design Working knowledge of embedded processors and firmware development Background within an SME environment supplying into larger customers RF electronics experience would be highly advantageous Proven experience providing technical leadership or mentoring within an engineering team If you are an experienced electronics engineer looking to step into a technically influential role within a growing business, Futures would be keen to hear from you

Lead Design Engineer / Design Team Leader / Senior Design Engineer required to join a manufacturer in Bradford, West Yorkshire. We’re looking for a Lead Design Engineer / Design Team Leader / Senior Design Engineer to manage a team of 2, whilst being responsible for hands on design from full concept through to delivery of mechanical engineered components. The Lead Design Engineer / Design Team Leader / Senior Design Engineer will have experience in 3D design, some leadership or management experience with mechanical design experience. Package Competitive salary depending on experience Mon - Thurs 07:30am-16:30 and Friday 07:45 - 12:45 5% Pension Role Responsible for the design function as well as the design of new products and providing engineering support through all phases of product development and manufacture Maintain and improve current designs and products Managing a team of 2 (1 Apprentice and 1 Production Engineer) Project manage design & development projects for the design and improvement of products Product concept, layout, assembly and detailed 2D / 3D CAD drawings Design test equipment and production jigs & fixtures Use of GD&T (Geometric tolerancing) Report to the Engineering Manager Site based in Bradford, West Yorkshire Requirements Some exposure to people / design team management – Experience as a Lead Design Engineer / Design Team Leader / Senior Design Engineer / Lead Designer / Chief Engineer / Lead Mechanical Engineer / Lead Mechanical Design Engineer / Lead CAD Engineer or similar Exposure to GD&T (Geometric tolerancing) Mechanical engineering design background 3D CAD experience – Solidworks, Inventor or similar Mechanical engineering qualification or similar Commutable to Bradford, West Yorkshire

Trainee AI Programmer – No Experience Needed Future-proof your career in Artificial Intelligence – starting today. Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. Train online at your own pace and land your first AI Engineer role in 1-3 months. Please note this is a training course and fees apply Job guaranteed - complete the programme and get a job or get your money back. Our candidates earn £28,000-£45,000. Why AI? AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. How It Works Step 1 – AI Engineering Fundamentals Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. Step 2 – Data Fundamentals Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. Step 3 – Notebooks & IDEs Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. Step 4 – Python Programming Master Python, covering everything from the basics to object-oriented programming (OOP). Step 5 – Python Streamlit Project Apply your Python skills by building a car price prediction app using Python and Streamlit. Step 6 – Python for Data Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. Step 7 – AI Sentiment Analysis Project Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. Step 8 – AI Prompt Engineering Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. Step 9 – Retrieval-Augmented Generation (RAG) Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. Step 10 – AI Specialised Customer Service Chatbot Project Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. Step 11 – Machine Learning Fundamentals Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. Step 12 – Machine Learning Project Put your machine learning knowledge into practice with a hands-on project. Step 13 – AI & Data Ethics Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. Step 14 – Oral Exam Complete a virtual oral exam to assess your understanding and ability to apply your learning. Step 15 – AWS Certified Cloud Practitioner Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. What You Get · 100% online, self-paced training · Microsoft AI-900 certification included · 1-to-1 tutor and recruitment support · Real-world project experience · Job guarantee – get a job or your money back · Starting salary of £28,000–£45,000 We Get You Hired We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London Ready to Start? If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps

RF Engineer Location: West Yorkshire (Hybrid - minimum 60% on-site) An exciting opportunity has arisen for an RF Engineer to join a specialist UK electronics company designing advanced RF and microwave systems for defence, aerospace, communications, and mobile network applications. Based in West Yorkshire, the business supports customers globally and continues to invest in next-generation RF technology. This role suits an experienced, hands-on RF design engineer who enjoys owning RF activities end to end, from concept and simulation through to validation and production handover. Main Responsibilities of the RF Engineer (based in West Yorkshire): Own RF design for transceiver modules and subsystems operating from 20MHz to 18GHz. Design RF front-end architectures and RFSoC interfaces, balancing performance, cost, power, and size. Design and develop RF power amplifiers, including high-power designs up to 100W Psat. Design and optimise RF circuits including LNAs, PAs, mixers, filters, oscillators, and synthesisers. Produce PCB schematics and contribute to RF-focused PCB layout, including impedance control and shielding. Perform RF simulation, modelling, and optimisation using industry-standard tools. Verify and troubleshoot RF designs at module and system level using lab-based measurements. Produce clear technical documentation to support efficient production handover. Support products throughout the full lifecycle and mentor junior RF engineers. Requirements of the RF Engineer (based in West Yorkshire): Degree in Electronic Engineering or a related discipline. Extensive professional experience as a hands-on RF design engineer. Proven RF design experience across the 1GHz-18GHz frequency range (20MHz experience advantageous). Strong understanding of RF system performance, linearity, noise, and spectral purity. Hands-on experience with RF test equipment including VNAs, spectrum analysers, and signal generators. Solid knowledge of RF PCB layout, substrates, and impedance-matched design. Experience with RF simulation and design tools (ADS, Microwave Office, CST, HFSS or similar). Strong communication skills, attention to detail, and ability to work independently and within a team. British citizen with existing SC clearance or the ability to obtain security clearance. Desirable Experience: Defence, aerospace, communications, or mobile networks background. RF design experience beyond 18GHz. Experience leading RF work packages or mentoring engineers. To apply for this RF Engineer role based in West Yorkshire, please send your CV to Kishan Chandarana: (url removed) or call (phone number removed)

At Modine, we are Engineering a Cleaner, Healthier World™. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air quality and conserve natural resources. Our Airedale by Modine brand is a world leader in the design and manufacture of innovative thermal management solutions for data centres, clean rooms, hospitals, universities, and other mission-critical environments. Trusted as The Critical Cooling Specialists, Airedale by Modine has decades of experience providing efficient, flexible end-to-end cooling solutions that work smarter, not harder, to deliver more cooling for less power. With manufacturing facilities in Canada, Spain, the UK, and the U.S., we’re scaling up across the world to support an ever-growing demand for our solutions. That’s where you come in…. The Opportunity An excellent opportunity has arisen for a Graduate Controls Engineer to work as part of the Controls Department in Product Development reporting to the Senior Lead Controls Engineer. The Role * As part of a Controls engineering team, develop and test software solutions which automate the mechanical components of Airedale products, and assist with the specification and validation of controls hardware and electronics. * Work within defined processes and procedures to ensure quality, consistency and safety of Airedale products in line with appropriate standards and regulations. * Collaborate with multi-disciplinary engineering teams to design, develop and qualify both platform product development projects (in support of the R&D roadmap) and proprietary key customer projects within agreed deadlines. * Pursue market leading technical advances to deliver innovation focusing especially on efficiency, reliability and precision. * Use development tools to manage software improvements and bug fixes on existing products, and maintain traceability of software releases and versioning. * Support manufacturing to ensure the quality of products leaving the factory. * Assist the R&D test laboratory with validation testing of engineering prototypes, proof of concept research projects and bespoke products for key customers. * Attend internal/external supplier meetings to identify opportunities for innovation. * Create technical literature and processes to ensure unit configuration is performed correctly both on site and in the factory. Skills/Experience * Minimum Degree level in an Engineering discipline. Electrical Engineering, Software Engineering, Mechatronics, Robotics or Computer Science are preferred. * Experience with PLC or microcontroller technology and IEC61131 programming languages. * Computer literate with understanding of structured software design and text based programming (e.g., C based languages, JavaScript, HTML5 etc.). * Excellent written and verbal communication skills are essential. * Appreciation of the requirements for developing ergonomic display and web based user interfaces (e,g., HMI, SCADA, touch screen etc.). * Good knowledge of the fundamental principles of electronics and experience working with electrical systems. * A basic understanding of mechanical systems and the fundamentals of thermodynamics. * Appreciation of datacentre HVAC applications and products, especially Chillers, CRAH, CRAC, CDU and FWU. * A basic understanding of serial communication protocols including Modbus, BACnet and Ethernet TCP/IP. * A desire to pioneer new and innovative solutions with “outside the box” thinking. * Must be able to work on projects autonomously, be self-motivated and able to take initiative. * Enthusiastic and positive attitude towards problem solving. In Return we Offer * Competitive salary * Contributory Pension 7% by Employer and 1% Employee * 25 days holiday plus bank holidays and the opportunity to purchase an additional 3 days. * Airedale rewards discount on days out and shopping vouchers

3x more additional Welding Inspector with CSWIP 3.1 certfication or PCN Level 2 Welding Inspector required to join an expanding engineering and fabrication business specialising in bespoke structural, M&E projects. With strong order books and a commitment to excellence, offering great pension contributions, >41 days holiday (+ volunteer days + buy one extra week), private healthcare and a comprehensive benefits package. Key Responsibilities as Welding Inspector: *Conduct thorough visual and dimensional inspections of welds and fabricated components to ensure compliance with industry and project standards. *Prepare and control welding and manufacturing documentation, specifications, and quality records. *Oversee welder testing, qualifications, and implementation of inspection and test plans. *Monitor interpass temperatures, heat input checks, and dimensional accuracy. *Identify and record non-conformities, managing rectification and retesting where required. *Coordinate non-destructive testing (NDT) internally and externally. *Audit welding processes and drive continuous improvement initiatives. *Champion Lean methodologies to enhance efficiency and quality. Qualifications & Skills Required to be accepted as Welding Inspector: *CSWIP 3.1 OR 3.2 / PCN Level 2 Welding Inspector. *PCN Level 2 Visual Testing cert! *NACE Coatings Inspection certification (BONUS, not essential to apply!) *Understanding of welding techniques, materials, coatings and industry standards. *Ability to read and interpret technical drawings and specifications. *Proficiency with inspection tools and equipment. *Strong communication and interpersonal skills. *Commitment to safety and quality excellence. *IT proficiency (Microsoft Word & Excel). *Additional PCN & Inspection qualifications may be considered Desirable (Not Essential): *NDT certifications (MPI/UT - Magnetic Particle Inspection or Ultrasonic Testing). *Experience with Hot Dye Galvanising, High Coat NACE Level 2, or ICORR. *Background in Welding Engineering, Supervision or Leadership roles. Benefits as Welding Inspector: *Upto 40days holiday; 25 days holiday plus 8 Bank Holidays (option to buy/ sell 5 days + volunteer days) *Competitive salary and shift allowance *Private healthcare and excellent pension contributions. *Professional development and training opportunities. Next Steps for the Welding Inspector: We are committed to creating an inclusive workplace where everyone is treated fairly and with respect. If you require accommodations during the application or interview process, please let us know, and we will ensure your needs are met. If you are a skilled Welding Inspector/ CSWIP 3.1 or Welding Engineer or Quality Inspector with specific certs and fabrication experience, looking for a rewarding career, click APPLY now, today! Kinetic plc is a Recruitment Consultancy with over 43 years of experience of delivering staffing solutions to the engineering, manufacturing, and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. S&T1

UKAS-accredited calibration laboratory based in Bradford is currently seeking a Calibration Engineer to join its growing technical team. You will be responsible for calibrating a wide range of test and measurement equipment, ensuring all work is carried out in line with UKAS, ISO, and internal quality standards. Key Responsibilities Calibrate optical, electrical, and dimensional test equipment to UKAS standards Carry out fault diagnosis and minor repairs where required Produce accurate calibration certificates and technical reports Work in accordance with ISO 17025 quality procedures Respond to technical queries from customers Maintain calibration records and documentation Requirements HNC and HND or Degree in Electrical, Electronic, Optical Engineering or related discipline Experience in a calibration or test environment Understanding of ISO 17025 and UKAS procedures Experience with optical calibration equipment (lasers, power meters, spectrometers) Laboratory-based calibration experience

Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Multi Skilled Engineer (Electrical Bias) CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer (Electrical Bias) to join the team located in Bradford. The job purpose is to carry out planned preventative maintenance, reactive works to building plant, equipment and systems in accordance with agreed service levels, undertake small installation works and respond to site engineering emergencies. Key Tasks Ensure that routine maintenance is carried out to all electrical / Mechanical systems to meet and exceed expectations, and agreed service level agreements. Carry out reactive repairs on all systems as required calling relevant sub-contractors as required. Carry out all PPM maintenance as per the instruction set provided within Concept. Reporting of all PPM defects via KPMG defect process and liaise with the supervisor of defect requirements. Ensure weekly equipment reports are updated with any change in status of equipment. Liaise with sub-contractors as required for repairs / quotations, monitoring performance of sub-contractor personnel. Ensuring works have been undertaken correctly and work area has been left in a satisfactory condition. Sign off completed PPM and reactive tasks via your PDA in line with KPMG policies and procedures in a timely manner. Ensure a professional image of CBRE is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Establish and maintain a good working relationship with the client representative and client's personnel. Ensure the provision of a safe & healthy working environment, and ensure compliance with all company policies and procedures, as well as client site policies, procedures and working arrangements, as required. To accurately maintain the site logs and associated paperwork. To be involved in call out rota if applicable Understand and maintain the all systems on site Liaise and work with other trade engineers to ensure electrical issues on all systems are attended to and resolved within SLA agreements Ensure a professional image of CBRE is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times. Ensure that professional and technical skills are maintained through a commitment to personal development and life-long-learning. Person Specification Skills A good basic education is essential, with good written and spoken English and basic mathematical skills. Recognized Electrical Qualification C&G 17th Edition in Electrical Installations C&G Test and Inspection Knowledge Good knowledge of various Building electrical systems and working to Planned Preventative Maintenance Regimes Current and relative knowledge of BS in relation to electrical systems on site Emerg ltg/Fire alarm/ power/BMS etc. Experience Previous working with structured PPM delivery Experience of working with business critical equipment Working within customer focused role. Previous working within health and safety led role Experience of electrical systems management and paperwork Aptitude Committed to the delivery of excellent customer service Able to work under pressure Able to make sound decisions when needed Good timekeeping Must be reliable and able to work without supervision A team player Good Communication Circumstances Able to work within a call out rota Able to work shifts within the contract set up Work between the London region KPMG sites To be available for weekend and out of hours working as required. Core Competencies Competence to Deliver Communication Reliability Innovation

Research and Development Engineer Xiros designs and develops innovative textile-based implants used in the repair and restoration of soft tissues in the human body. As a twice winner of the Queen’s Award for Enterprise and an Investors in People accredited organisation, we are proud of our reputation for innovation, quality, and people development. We are now offering an entry-level opportunity for a Mechanical Engineering or Medical Engineering graduate to join our Research and Development team at our Yeadon, Leeds (West Yorkshire) site. This role offers an excellent opportunity to develop your career within a leading and highly innovative medical device company. The role: Working closely with the Head of R&D and Senior Project Manager, you will contribute to the development of new medical devices from concept through to validation. Key responsibilities include: • Supporting New Product Development activities across multiple projects. • Conducting laboratory-based testing of medical devices. • Preparing technical documentation and test reports to support product development and regulatory requirements. • Collaborating cross-functionally with colleagues as required. To be successful in this role, you will have: • A 2:1 degree, or above, in Mechanical Engineering or Medical Engineering. • Experience using CAD software, gained through university projects or previous employment. • A proactive, self-motivated approach with strong planning and organisational skills. • Good verbal communication skills and the ability to work effectively with colleagues across different functions. • Excellent written communication skills, with the ability to produce clear, accurate technical reports and documentation. Closing date: Monday 9 February 2026 Hours: Full-time -37.5 hours per week (Monday to Friday). Flexi-time scheme in operation. Location: On site – Yeadon, Leeds, West Yorkshire. Free on-site parking. Salary: £31,000 per annum Benefits: 8% employer pension contributions. 34 days holiday per annum including bank holidays, rising to 39 days with length of service. Life assurance worth 4 x salary. Cash plan giving ability to claim back some dental, optical, physiotherapy costs. Free fruit daily. Free drinks. Company parties. Flexible benefit choices (after completion of probationary period: Enhanced employer pension contributions up to 15%; Additional 5 days holiday; Private Medical Insurance; Enhanced cash-plan scheme; Gym membership; Free pensions advice from a financial planner. You may have experience of the following: R&D Engineer, Research Engineer, Development Engineer, Product Development Engineer, New Product Development (NPD) Engineer, Mechanical Design Engineer, Medical Device Engineer, Biomedical Engineer, Graduate Mechanical Engineer. REF-(Apply online only)

Are you an experienced Design Engineer looking to step into a senior, technically influential role? We are recruiting on behalf of a global leader in the design, development and manufacture of high-speed metal forming and finishing machinery, with a turnover of $8.5bn, operations in 41 countries, and a long-standing reputation for engineering excellence. The business is a proud recipient of The Queen’s Awards for Enterprise in International Trade, Innovation and Sustainable Development. Based at the company’s UK headquarters in Bradford, the Senior Design Engineer will play a critical role within the New Product Development function, acting as Project Design Authority and taking ownership of the delivery of robust, innovative technical solutions across complex engineering projects. The Role As Senior Design Engineer, you will be responsible for defining, developing and validating technical solutions from concept through to delivery. Working within a team of experienced design engineers, you will provide technical leadership across projects, support continuous improvement of NPD processes, and contribute to the protection and development of the company’s intellectual property. Key Responsibilities Act as Project Design Authority, responsible for the delivery of the complete project technical solution Generate technical requirements from customer needs and product specifications Develop design concepts to meet defined functional requirements Document design assumptions, trade-offs and calculations within the project design file Evaluate design concepts, assessing technical and project risks to select preferred solutions Use Failure Mode Effects and Analysis (FMEA) techniques to identify and mitigate technical risks Prepare and present technical reports for project gate reviews Generate test plans to verify design concepts and overall system performance Identify opportunities for the protection of design intellectual property (IP) Adopt and actively use New Product Development (NPD) processes and tools throughout the project lifecycle Coordinate with the Quality Department to define incoming inspection requirements for component verification Provide technical support to the Publications Department in the creation of product manuals, build books and Standard Operating Procedures (SOPs) About You You will be an experienced Design Engineer, operating at a senior level or ready to take that next step, with a strong background in mechanical engineering and complex machinery. You’ll be comfortable leading technical projects, making sound engineering decisions, and communicating effectively across teams and stakeholders. Experience & Qualifications Degree-level qualification (or equivalent) in Mechanical Engineering Proven experience leading or contributing significantly to technical engineering projects Experienced user of CAD systems to produce models and detailed drawings Technical Knowledge & Skills Geometric Dimensioning & Tolerancing (GD&T) principles and standards Material properties and engineering standards Machining methods and manufacturing techniques High-speed, bespoke or automated machinery (including can making industry/process knowledge) Drawing and Bill of Materials (BoM) configuration management systems Sensor technologies and solutions Electrical drive and mechanical transmission systems Hydraulics, pneumatics and lubrication systems Strong problem-solving capability with excellent written and verbal communication skills Ability to work effectively across multidisciplinary project teams and with suppliers, partners and customers What’s on Offer Circa £60,000 salary plus up to 15% annual bonus Flexible working hours and enhanced annual leave Bupa private medical insurance and health cash plan Employer pension contribution of up to 9% (6% employee contribution) Generous life assurance scheme of up to 7x salary Clear opportunities for progression and ongoing professional development If this sounds like the opportunity you’re looking for and you’d like to arrange an initial confidential discussion, please apply online or contact Jess Heywood at Cubed Talent on (phone number removed)

Trainee AI Engineer – No Experience Needed Future-proof your career in Artificial Intelligence – starting today. Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. Train online at your own pace and land your first AI Engineer role in 1-3 months. Please note this is a training course and fees apply Job guaranteed - complete the programme and get a job or get your money back. Our candidates earn £30,000-£45,000. Why AI? AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. How It Works Step 1 – AI Engineering Fundamentals Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. Step 2 – Data Fundamentals Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. Step 3 – Notebooks & IDEs Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. Step 4 – Python Programming Master Python, covering everything from the basics to object-oriented programming (OOP). Step 5 – Python Streamlit Project Apply your Python skills by building a car price prediction app using Python and Streamlit. Step 6 – Python for Data Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. Step 7 – AI Sentiment Analysis Project Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. Step 8 – AI Prompt Engineering Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. Step 9 – Retrieval-Augmented Generation (RAG) Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. Step 10 – AI Specialised Customer Service Chatbot Project Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. Step 11 – Machine Learning Fundamentals Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. Step 12 – Machine Learning Project Put your machine learning knowledge into practice with a hands-on project. Step 13 – AI & Data Ethics Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. Step 14 – Oral Exam Complete a virtual oral exam to assess your understanding and ability to apply your learning. Step 15 – AWS Certified Cloud Practitioner Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. What You Get · 100% online, self-paced training · Microsoft AI-900 certification included · 1-to-1 tutor and recruitment support · Real-world project experience · Job guarantee – get a job or your money back · Starting salary of £30,000–£45,000 We Get You Hired! We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London Ready to Start? If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps

Quality Engineer Salary dependent on experience Monday to Friday – 40 hours per week Bradford BD12 West Yorkshire – must live within a commutable distance to Bradford Job Purpose Reporting to the Quality Manager the Quality Engineer will manage and improve the performance of the site production and quality system by supporting the Quality Manager in accordance with the annual Operations and Quality objectives, goals, strategies & measures (OGSM). Task & Accountabilities Ensure compliance with all Safety, Health and Environmental procedures. Ensuring that all company HS&E policies and procedures are personally adhered to taking a ‘no walk past’ approach. Quality Management Systems * Support the Quality Manager in developing and maintaining the QMS system in line with ISO9001, including training out across the shop floor * Conduct Internal Management Audits * Support third party and customer audits * Create and maintain department SOP’s * Deputise for the Quality Manager in the role of site document controller and reporting of KPI’s Supplier & Customer Quality * Handle customer complaints using disciplined problem-solving techniques such as 8D * Act as customer contact for timely complaint response * Clearly understand internal / external customer quality requirements, including inspection and test certification, and develop suitable value driven metrics to verify performance improvements. * Monitor supplied product quality and raise customer complaints where necessary * Conduct contract review of incoming orders, ensuring customer requirements are clearly understood Operational Quality * Create control plans and FMEAs for site production processes * Carry out layered process audits and process confirmations * Use the SAP ERP system to manage product quality status and inspection data * Coach & Develop the Quality Technicians with their role on quality, inspection and process control activities * Carry out full analysis and ability to facilitate the resolution of Quality problems through the wider cross functional team involvement via suitable tools such as 8D problem solving and lean six sigma methodologies as appropriate. Calibration - Manage measurement devices of calibration including maintenance, archiving records and execution of the device plan. Planning & Organising - Plan Quality activities in accordance with overall priorities as identified and communicated by the Plant & Quality Manager (as per above). Internal & External Relationships - Bradford Plant Management team members - UK Quality representatives at other sites - Global Quality team members (in UK & outside) - External customer representative - Internal & External auditors / inspection bodies A methodical, proactive and detailed oriented Quality Engineer who is a strong decision maker. A collaborative team player who has the ability to also work independently. Committed to continuous improvement and professional development. The ability to analyse and interpret data along with coaching all to create a culture that understands and embodies quality. Experience – Need to Know Essential * Proven experience of working in a quality engineering or quality assurance role within the manufacturing or engineering environment * Experience of quality management systems preferably ISO 9001 * Practical experience with root cause analysis, problem solving techniques and continuous improvement processes * Experience in conducting internal and supplier audits * Background in data analysis, process capabilities etc Desirable * Degree qualified in engineering * Formal professional qualification in a Quality discipline. * Metal material knowledge. * Qualification in Metallurgy Knowledge & Skills - Need to be able to Essential - Strong proven ability of quality tools and methodologies (e.g. FMEA, 8D etc) - Excellent analytical and investigative skills with attention to detail - Competent in reading and interpreting engineering drawings and technical specifications - Proficient in using quality and manufacturing software (e.g. SAP) - Effective verbal and written communication skills for liaising with internal teams, suppliers and customers - Strong organisation and time management skills with the ability to manage multiple priorities Desirable - Practiced six sigma or equivalent. - Presentation & report writing (verbal and written - Working in wire industry or similar Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful

Quality Engineer Salary dependent on experience Monday to Friday 40 hours per week Bradford BD12 West Yorkshire must live within a commutable distance to Bradford Job Purpose Reporting to the Quality Manager the Quality Engineer will manage and improve the performance of the site production and quality system by supporting the Quality Manager in accordance with the annual Operations and Quality objectives, goals, strategies & measures (OGSM). Task & Accountabilities Ensure compliance with all Safety, Health and Environmental procedures. Ensuring that all company HS&E policies and procedures are personally adhered to taking a no walk past approach. Quality Management Systems Support the Quality Manager in developing and maintaining the QMS system in line with ISO9001, including training out across the shop floor Conduct Internal Management Audits Support third party and customer audits Create and maintain department SOPs Deputise for the Quality Manager in the role of site document controller and reporting of KPIs Supplier & Customer Quality Handle customer complaints using disciplined problem-solving techniques such as 8D Act as customer contact for timely complaint response Clearly understand internal / external customer quality requirements, including inspection and test certification, and develop suitable value driven metrics to verify performance improvements. Monitor supplied product quality and raise customer complaints where necessary Conduct contract review of incoming orders, ensuring customer requirements are clearly understood Operational Quality Create control plans and FMEAs for site production processes Carry out layered process audits and process confirmations Use the SAP ERP system to manage product quality status and inspection data Coach & Develop the Quality Technicians with their role on quality, inspection and process control activities Carry out full analysis and ability to facilitate the resolution of Quality problems through the wider cross functional team involvement via suitable tools such as 8D problem solving and lean six sigma methodologies as appropriate. Calibration Manage measurement devices of calibration including maintenance, archiving records and execution of the device plan. Planning & Organising Plan Quality activities in accordance with overall priorities as identified and communicated by the Plant & Quality Manager (as per above). Internal & External Relationships Bradford Plant Management team members UK Quality representatives at other sites Global Quality team members (in UK & outside) External customer representative Internal & External auditors / inspection bodies A methodical, proactive and detailed oriented Quality Engineer who is a strong decision maker. A collaborative team player who has the ability to also work independently. Committed to continuous improvement and professional development. The ability to analyse and interpret data along with coaching all to create a culture that understands and embodies quality. Experience Need to Know Essential Proven experience of working in a quality engineering or quality assurance role within the manufacturing or engineering environment Experience of quality management systems preferably ISO 9001 Practical experience with root cause analysis, problem solving techniques and continuous improvement processes Experience in conducting internal and supplier audits Background in data analysis, process capabilities etc Desirable Degree qualified in engineering Formal professional qualification in a Quality discipline. Metal material knowledge. Qualification in Metallurgy Knowledge & Skills - Need to be able to Essential Strong proven ability of quality tools and methodologies (e.g. FMEA, 8D etc) Excellent analytical and investigative skills with attention to detail Competent in reading and interpreting engineering drawings and technical specifications Proficient in using quality and manufacturing software (e.g. SAP) Effective verbal and written communication skills for liaising with internal teams, suppliers and customers Strong organisation and time management skills with the ability to manage multiple priorities Desirable Practiced six sigma or equivalent. Presentation & report writing (verbal and written Working in wire industry or similar Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful. TPBN1_UKTJ

About Hartwell Manufacturing Hartwell Manufacturing is a family-run engineering business with nearly 50 years of experience delivering high-quality acoustic enclosures and heavy steel fabrication projects. From our Ossett headquarters, we support clients in the power, data centre and industrial sectors with engineered solutions built on precision, collaboration and reliability. The culture is hands-on, team-focused and proud of the work we produce. Overview The Commissioning Engineer/Inspector plays a hands-on, site-based role ensuring that all mechanical and electrical elements of acoustic enclosure fit-out works meet client and internal quality requirements. This position involves being physically present on the shop floor, actively inspecting works in progress, supporting fit-out teams, and addressing issues in real time to maintain build quality and prevent rework. Key Responsibilities * Maintain a strong daily presence on the shop floor, carrying out real-time inspections on mechanical and electrical fit-out activities. * Attend morning production meetings to understand priorities and actively communicate current quality issues and risks. * Update quality trackers and route cards once inspections are completed, ensuring accurate and timely documentation. * Perform hands-on dimensional checks, physical inspections, and verification of installations in line with approved drawings, specifications, and quality standards. * Witness pressure testing of fuel tanks and associated pipework systems, completing and signing off relevant reports. * Verify torque settings on bolted connections in line with manufacturer and project requirements, completing documentation as required. * Carry out thorough visual and functional inspections of completed works using both internal and client inspection documentation. * Identify, document, and escalate non-conformances, working directly with fit-out teams to support corrective actions and prevent recurrence. * Review inspection test plans, quality records, and route card completion to ensure full compliance prior to project handover. * Liaise on-site with clients, contractors, commissioning teams, and other stakeholders to resolve quality issues promptly. * Support final inspection and handover processes, ensuring all quality documentation for fit-out projects is complete, accurate, and properly controlled. * Take ownership of quality performance on the shop floor, actively driving standards and promoting a right-first-time culture. Required Experience * Experience within the data centre sector and/or acoustic enclosure systems is desirable. * Strong mechanical and electrical installation inspection background. * Familiarity with site-based quality control processes, inspection methods, and documentation requirements. * Practical, detail-focused, and methodical approach with the confidence to work independently across two active sites. * Comfortable working directly with production teams, identifying issues early, and driving proactive solutions

Our UKAS accredited client is looking for an Optical Test Equipment Calibration Engineer. The ideal candidate will have extensive experience of multiple disciplines of calibration including fiber optics, Laser sources, Wavelength Meters, Optical Spectrum Analysers or Thermopiles. You will ideally already on the way to becoming UKAS Engineer, or willing to begin it

Multi Skilled Engineer Salary: £35,000 to £53,000 (depending on experience) + Pension + Overtime Shift Pattern: Double Days Location: Bradford Reference: Jo6856/LN The Company My client is a world leader in the development of specialist high performance packaging solutions and is extremely well established, with over 30 years of manufacturing experience. This highly respected manufacturer is looking to expand its engineering capacity and is adding to the engineering knowledge already within their current team. The group supplies products into several blue chip manufacturing organisations with a reputation for product quality and reliability. Key Skills • Apprentice Trained Engineer, • Experience of Packaging Machinery, • Understanding of PPM systems The Roles • Develop, test, and implement engineering solutions that improve packaging processes, line performance, and product quality., • Support R&D and NPD (New Product Development) activities, including trials, prototyping, and evaluation of new packaging formats or machinery., • Assist with the integration, setup, and optimisation of packaging machinery and automation technologies., • Lead engineering investigations, identify root causes, and deliver corrective and preventive actions., • Provide technical support for customer projects, including blue-chip FMCG clients and leading retailers., • Prepare engineering documentation: test reports, line set-up specifications, risk assessments, and technical drawings. There is a huge scope and variety on offer, so the successful candidate will be in line to broaden their skills considerably. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

LabVIEW Engineer required to join a growing team who develop measurement, automation, and control systems for aerospace, defence, petrochemical, manufacturing, automation and telecommunications clients. You will work alongside LabVIEW and other development software programming engineers programming and integrating complex machinery also developing automation and test systems. Responsibilities LabVIEW and other development tool programming. Control, automation and test system development. Requirements Degree in Computer Science, Software Engineering, Automation Engineering, Robotics or related. Control systems, robotics, automation, LabVIEW or C++ experience, Eligible to work in the UK

Drumgrange is seeking an experienced and collaborative Electronics Test Engineer to join our inclusive team. This Electronics Test Engineer role is based in Portland on a 37. Execute formal test documentation, including recording of results—hardware, software and firmware programme configuration.

We are in the market for a Performance Test Engineer with previous experience of designing and developing performance testing solutions and have sound knowledge/experience of either JMeter or Gatling. Provide regular status updates and reports on testing progress to the Test Manager and stakeholders

We’re currently looking for an Infotainment Test Engineer to be responsible for the hands-on testing of automotive infotainment systems. For more information on the Infotainment Test Engineer role, please apply now:. Essential background and skills of the Infotainment Test Engineer:.

We are in the market for a Test Automation Engineer with previous experience of designing and developing test automation frameworks in Playwright using either Typescript or JavaScript. Job Title: Test Automation Engineer (Front end & API). Provide regular status updates and reports on testing progre

We are looking for someone with good depth of experience who can help contribute towards our test automation framework that fits between unit test coverage and the manual testing that we currently have in place. Stay up-to-date with new and modern testing tools and test strategies. The purpose of th

This role would suit a skilled test development engineer with experience in the design and development of test systems, running test and the analysis & documentation of test data for electromechanical automotive components. Setting up of test cells using LabVIEW, ensuring appropriate test equipment

We are in the market for a Test Automation Engineer with previous experience of designing and developing test automation frameworks in Playwright using either Typescript or JavaScript. Provide regular status updates and reports on testing progress to the Test Manager and stakeholders. Job Title: Tes

We are looking for a Software Test & Verification Engineer to join our software team and take ownership of the test strategy, verification approach, and automated testing infrastructure across our robotic system software stack. GoogleTest, pytest, or similar). Collaborate with engineers to improve t

We are in the market for a Performance Test Engineer with previous experience of designing and developing performance testing solutions and have sound knowledge/experience of either JMeter or Gatling. Job Title: Performance Test Engineer (6 month FTC). Experience of Performance testing using JMeter

A background in electronics, test engineering or hardware manufacturing. Test Engineer / Hardware Operations Specialist. We’re looking for a Test Engineer who loves getting hands-on with hardware and takes pride in quality, detail, and problem-solving.

An exciting opportunity for an LEV test engineer to develop and grow a rapidly expanding LEV department. The engineer would be responsible for carrying out LEV testing, and working with the directors to increase sales and develop this important division within this company. Carrying out training for

Prepare test procedures, analyse test data and write test reports to clearly communicate the objectives, methods and results of test campaigns. Manage suppliers of test equipment and 3rd party test houses to enable the efficient execution of test activities both internally and externally. This is a

Our client, a leading organisation supporting the Emergency Services Mobile Communication Programme (ESMCP), is hiring for a Test Engineer to join their team. Job Title: Test Engineer (SC Cleared).

Prepare test procedures, analyse test data and write test reports to clearly communicate the objectives, methods and results of test campaigns. Manage suppliers of test equipment and 3rd party test houses to enable the efficient execution of test activities both internally and externally. This is a

We are looking for someone with good depth of experience who can help contribute towards our test automation framework that fits between unit test coverage and the manual testing that we currently have in place. Stay up-to-date with new and modern testing tools and test stra. The purpose of the role

Principal Engineer – Test Integration. Utilising technical information gathered from various stakeholders such as design teams to produce test documentation that will evaluate the rigour of the systems under test. Undertaking integration testing in line with approved test procedures and taking

AssetCool is one of Europe’s fastest-growing startups, building the fastest path to more power on the grid. Do you want to work with the 15th fastest-growing startup in Europe?.

Drumgrange is seeking an experienced and collaborative Electronics Test Engineer to join our inclusive team. This Electronics Test Engineer role is based in Portland on a 37. As an experienced Electronics Technician, you will support our skilled engineering and manufacturing teams to supply high-qua