Test engineer jobs in BridgwaterCreate job alerts

Altrad are seeking an experienced and technically capable Mechanical Delivery Lead to act as the MEH JV focal point for all matters relating to the mechanical installation scope on Hinkley Point C. This role will be based at Hinkley Point C on a permanent basis and will provide technical leadership across mechanical installation activities, including piping, HVAC and equipment. Working as part of the MEH JV, you will lead and support a team of mechanical resources, provide specialist knowledge across defined areas and work closely with construction, commercial, planning, quality and supply chain teams to ensure safe, consistent and efficient delivery. The role will also support the development and implementation of an end-to-end mechanical services installation strategy aligned with the wider site area delivery strategy. • Act as the MEH JV focal point for all matters relating to the mechanical installation scope., • Lead and support a team of mechanical resources, providing specialist knowledge and acting as the Subject Matter Expert across defined areas., • Provide reporting and support to the MEH JV Construction Manager on all matters relating to mechanical services., • Provide safety advice and guidance relating to the installation of mechanical equipment, systems and services., • Support the development and delivery of an end-to-end mechanical services installation strategy aligned with the site area delivery strategy., • Drive consistency in delivery standards across the project-wide area delivery structure., • Ensure best-for-project interface decisions are implemented consistently across multiple areas and buildings., • Liaise and coordinate constructability activities with the supply chain, ensuring a consistent approach to mechanical installation., • Support the MEH JV commercial team by providing accurate cost advice for mechanical services installation activities., • Support the MEH JV planning team in developing accurate schedule advice for mechanical services installation activities., • Support the MEH JV quality team in developing appropriate Inspection and Test Plans for mechanical services installation activities., • Provide accurate performance and progress information to support weekly and monthly MEH JV reporting of on-site installation activities., • Work with relevant stakeholders to provide input into resource management across both white-collar and blue-collar resources., • Support strategic pre-planning for the movement and erection of multiple equipment types, including logistics, plant, equipment and resource planning., • Provide technical information and advice to support the wider HPC project., • Identify, manage and support the mitigation of risks associated with mechanical services installation activities., • Ensure mechanical installation activities are delivered in accordance with applicable Health, Safety and Environmental standards and project requirements., • Mechanical Engineering Degree., • Minimum of 10 years' experience in project management and delivery of complex mechanical installation activities., • Excellent interpersonal and communication skills, both written and verbal., • Up-to-date knowledge of current Health, Safety and Environmental standards and requirements., • Confident use of IT and Microsoft Office software., • Experience within a nuclear environment is preferred but not essential., • Awareness of UK nuclear site licence conditions and their application., • Awareness of UK CDM regulations., • High level of technical knowledge relating to the safe handling and installation of mechanical systems., • Strong ability to work collaboratively across multidisciplinary teams, including construction, commercial, planning, quality and supply chain functions. At Altrad, our people create endless opportunities. We are the leading provider of support services transforming our nations critical infrastructure to operate safely and sustainably. With over 16,000 talented people across our region, we provide the full spectrum of critical services including consulting, design, engineering, construction, asset life optimisation through to decommissioning, for industries both onshore and offshore. • Be part of a major UK nuclear new-build programme in Somerset, • Gain hands-on site experience within a large-scale alliance delivery model, • Structured graduate development programme with mentoring and professional support, • Competitive salary and benefits package, • Clear career progression toward Chartered Mechanical Engineer status, • A professional, collaborative and safety-driven working environment As an employer, we are committed to promoting and protecting the physical and mental health and wellbeing of all our people. We are committed to making our recruitment process accessible and inclusive. If you require any adjustments at any stage – including interviews or assessments, please let us know. We're happy to discuss what would help you take part fully. #J-18808-Ljbffr

Technical Engineering Support (TES) is an engineering services company with over 30 years of experience, specializing in test coordination and industrial commissioning. TES also supports its clients in engineering studies and the assembly coordination of industrial equipment. As part of our expanding activities on major infrastructure projects, we are currently looking for a Senior Cost Engineer (m/f) to serve as a technical lead within our project controls organization. Acting as a subject matter expert within the Cost and Forecasting team for the Hinkley Point C (HPC) nuclear power station project, the Senior Cost Engineer ensures the uniform implementation of the cost management strategy across designated project areas. You will oversee the delivery of specific contracts ranging in value from £10m to £500m, direct the daily workload of Cost Engineers and Trainee Cost Engineers, and serve as the main face of cost management to Program Directors and key stakeholders. This role actively underpins success across Engineering, Procurement & Manufacturing, Construction, and Commissioning phases, aligning with HPC critical success factors: EPC critical path execution Key milestone achievement leading to Commercial Operation Date (COD) Highly regulated context under the oversight of the Office for Nuclear Regulation (ONR). Deep integration of Nuclear Safety Culture. Strict adherence to project priorities: Safety, Quality, Time, and Cost. • Technical Leadership & Team Guidance: Direct daily tasks and provide technical guidance to Cost Engineers and Trainee Cost Engineers. Lead training sessions on cost management software and processes for project management teams., • Contract & Data Management: Oversee cost and forecast data across high-value contract portfolios (£10m–£500m) in alignment with CBS/WBS. Ensure data integrity within systems such as EcoSys and SAP., • Stakeholder Engagement & Decision Support: Partner with Program/Area Directors to review major issues, lead scenario planning workshops, and present accurate insights at Board Meetings, Program Reviews, and ROTCS., • Trend & Risk Integration: Work alongside Risk Leads and Project Controls Managers to connect cost data with schedule, risk, and change management, ensuring high-quality risk information informs baseline estimates., • Reporting & Dashboards: Manage and verify data outputs within Power BI dashboards and ensure high-quality cost reporting across defined cycles., • Governance & Information Security: Support good governance, process enhancement, and strict compliance with protective marking for Sensitive Nuclear Information. Direct experience on major complex construction projects. Prior nuclear industry experience. Software Expertise: Advanced user and trainer in EcoSys, SAP, Power BI, Teamcenter, and MS Office (Excel, Powerpoint, Access). Strategic & Analytical Thinking: Ability to simplify complex financial and technical scenarios for executive-level audiences. Leadership: Strong delegation, coaching, interpersonal, and stakeholder-influencing capabilities. #J-18808-Ljbffr

Role: Field Engineer - NDT & Welding Inspector Position: Contract Location: Hinkley Point C, Somerset Duration: Ongoing Contract Day Rate: Up to £350 p/d PAYE + 36 days annual leave // Up to £475.72 p/d Umbrella Play Your Part in Building the Future of UK Energy Are you a CSWIP 3.2-qualified inspector with practical welding knowledge and experience of NDT under UK PCN requirements? Bring your expertise to Hinkley Point C and help ensure critical construction work meets the standards demanded by a major nuclear project. Rullion is recruiting a Field Engineer - Welding & NDT Inspector to join the site's construction surveillance team. This is a field-based opportunity for someone who enjoys being close to the work: inspecting installations, engaging with contractors and identifying quality issues before they become bigger problems. We welcome applications from candidates across nuclear, pharmaceutical, petrochemical, chemical and water industries, alongside other regulated engineering and construction environments. If you understand welding quality, inspection discipline and the importance of traceable records, your experience could transfer well to this role. Reporting to the Construction Superintendent, you will provide independent surveillance of welding, fabrication and construction activities, checking that work complies with approved drawings, contractual requirements and quality arrangements. You will combine technical judgement with a practical approach to contractor relationships-challenging concerns clearly, supporting their resolution and helping maintain a strong nuclear safety culture. • Carrying out field surveillance of welding, fabrication and installation activities against approved requirements, inspection plans and applicable codes., • Reviewing welding and NDT inspection evidence, identifying discrepancies and ensuring concerns are escalated appropriately., • Raising Non-Conformance Reports and monitoring corrective actions through to satisfactory closure., • Checking contractor compliance with authorised Quality Control Plans and Inspection and Test Plans., • Ensuring required inspection records are completed, reviewed and agreed before works are covered up., • Maintaining accurate, concise site diaries and surveillance reports, contributing to quality reporting and project KPIs., • Working closely with contractors, construction teams and quality stakeholders to anticipate issues and support timely resolution., • Ensuring proposed changes follow formal review and approval processes, with no unauthorised design decisions made in the field., • Planning and conducting surveillance in line with site health, safety and environmental requirements., • A current CSWIP 3.2 Senior Welding Inspector qualification as a minimum., • Practical NDT experience and a sound understanding of UK PCN certification requirements, including current PCN Level 2 Ultrasonic Testing (UT), • Hands-on welding or fabrication experience, supported by a strong track record of weld inspection on construction or engineering projects., • A qualification in mechanical engineering, materials or welding, or equivalent vocational training and relevant experience., • Working knowledge of metallurgy, welding processes, weld defects and the application of NDT., • Experience applying relevant British, European or international construction and design codes, such as BS EN, ASME or RCC-M., • Confidence interpreting construction drawings, inspection plans and quality records within a safety-critical environment., • Experience identifying non-conformances, producing clear inspection reports and following corrective actions through to completion., • The confidence to challenge work constructively and build effective relationships with contractors and site teams., • PCN Level 2 certification in a surface inspection method, such as Magnetic Particle Testing (MT/MPI) or Penetrant Testing (PT/DPI)., • Inspection experience involving pressure systems, pipework, mechanical equipment or associated fabrication., • Previous involvement in major power generation or nuclear construction projects., • Familiarity with quality management processes and construction completion documentation., • Opportunity to contribute to the UK's most complex and high-profile clean energy project., • Work alongside some of the most skilled professionals in the industry., • Gain exposure to cutting-edge construction and engineering methods., • Develop your career within one of the world's most demanding project environments., • Competitive day rate and long-term contract potential. If you've built refineries, energy-from-waste plants, pharmaceutical clean facilities, water treatment works or petrochemical units - this is the next level of technical challenge. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. #J-18808-Ljbffr

Job Title: Piping Engineering Completion Lead Location: Hinkley Point C, Somerset Pay: £327.95 PAYE or £458.81 Umbrella Job ID: 2276 Job Purpose: To deliver the engineering required for the completion of the HPC MEH piping scope on site through leadership of a team of engineers. Completion activities cover the on-site piping pressure tests and subsequent activities such as flushing, drying and preservation, up to the hand over to Commissioning. Principal Responsibilities: Pilot the Installation Contractors to ensure the pressure test and subsequent activities are prepared and executed in accordance with nuclear safety and quality standards. Put in place the strategy for the preparation and the execution of the on-site pressure test activities of HPC pipework: Circa 1500 pressure test loops per unit Pilot the Installation Contractors to prepare the documentation related to pressure test and subsequent activities (flushing, drying, preservation) up to hand over to Commissioning Manage the interfaces between: Installation Contractors pressure test team Installation Contractors construction team Contracts Project Managers Engineering colleagues in charge of upstream activities Building leads Commissioning team Pressure compliance team, competent person, and conformity assessment body Support the resolution of technical topics related to pressure test and subsequent activities: Definition and supply of temporary components Demineralized water supply Treatment of effluent Exemption request Organise the surveillance with the different reviewers on pressure test documentation including loop definition and procedures and perform reviews Lead the development of a digital tool which will support the pressure test loop definition. Define of the strategies for completion (Life Time Quality Records...) and hand over to Commissioning (Open Point management...) Supporting the construction Project Managers in the establishment of Key Performance indicators with the objective of reporting site progresses for construction activities. Ensure integration of the needs for activities post-construction into the construction sequence (for instance: Hydro pressure test loop definition, Commissioning Test Pack review and acceptance...). Coordinate all the engineering activities to support construction sequence, and including the identification and implementation of improvements to processes and ways of working (e.g., redlining process on site). Essential knowledge, Skills, Qualifications & Experience: Proven experience working in an equivalent / related role related to pressure test and completion activities; Meticulous and rigorous approach to engineering to achieve high professional standards; Proven ability to successfully deliver engineering safely to the correct quality, time and cost in a fast paced, schedule driven environment; Strong people leadership skills to coordinate efficient delivery of their scope through empowerment of their team members and drawing on the necessary support from others in the organisation; Ability to influence a diverse range of stakeholders; Ability to work autonomously but with awareness of own limitations; Knowledge of contractual and commercial mechanisms. Desirable knowledge, Skills, Qualifications & Experience: Degree in related engineering field; Chartered Engineer with relevant engineering institute; Detailed understanding of PWR design and experience in PWR operations; Piping engineering, installation and/or commissioning experience Working knowledge of French language an advantage; Good knowledge of CDM Regulations. TPBN1_UKTJ

Job Title: Field Engineer - Welding/NDT Inspector Location: Hinkley Point C, Bridgwater Pay: £327.95 PAYE or £458.81 Umbrella Job ID: 2167 Do you have working knowledge of British & European Standards in Construction & Design codes/guidelines with knowledge in the fields of Metallurgy, Welding and NDT? Looking to join an expanding team and contribute your knowledge and develop your skills to one of the nation's key infrastructure projects? Opportunity... We are recruiting for a Field Engineer (Welding/NDT Inspector), and you will be responsible to perform Surveillance to give confidence that the activities are performed in accordance with the Contractor's Work Information. You will be a staunch advocate of our Nuclear Safety Culture and help to embed this approach in all processes and activities undertaken on the Project. You will report to the Construction Superintendent for day-to-day guidance. Input into site wide management issues and a high level of interaction and coordination with other operational members of the site wide team will be required. In addition to reporting and liaising responsibilities, as the Field Engineer you will be required to adhere to (and suggest enhancements and improvements to) company policies, procedures and protocols for construction, health & safety, and other functions. What you'll be doing... As a Field Engineer / Welding Inspector, you'll play a key role in ensuring construction activities are delivered in accordance with the contract, quality requirements and approved processes. Your responsibilities will include: Inspecting and verifying that works are constructed in accordance with the contract, identifying non-conformances and notifying the Construction Superintendent where action is required. Raising, completing and issuing Non-Conformance Reports (NCRs) to relevant contract partners, and monitoring their progress through to resolution. Proactively communicating with NNB stakeholders, maintaining strong working relationships and ensuring surveillance activities are completed and reported in a timely manner. Contributing surveillance information to support team and project KPIs. Identifying potential quality issues at an early stage and supporting the implementation of appropriate mitigating actions. Supporting the team in implementing temporary measures to mitigate risks, maintain safe working conditions and ensure works remain within required quality standards. Following up with appropriate and proportionate actions, such as issuing communications or arranging meetings, to help prevent unnecessary disruption or delays to works. Ensuring design decisions are not made "in the field" by EDF Energy or contractors, and that any required changes are considered, reviewed and approved through the appropriate formal processes. Providing the team with a clear perspective of current and upcoming site activities, helping to anticipate potential quality and construction issues. Ensuring tasks are planned and delivered in accordance with the company's Health, Safety and Environmental (HSE) requirements. Developing and maintaining a strong understanding of construction drawings, construction activities, Quality Control Plans and Quality Inspection Records. Ensuring and monitoring that required Quality Inspection Records are completed, reviewed and agreed before works are covered up. Reviewing contractor performance against authorised Quality Control Plans and identifying any areas requiring corrective or improvement actions. Who you are... Mechanical Engineering, Materials, Welding qualifications or equivalent vocational training and experience. A welding inspector qualification e.g. CSWIP 3.1 or equivalent in line with ISO 17024. PCN level 2 (or equivalent) NDT qualifications - desirable to have one surface NDT and one volumetric NDT. Broad knowledge and wide understanding of the Engineering Construction industry, materials, trades methods and legal requirements. Excellent organisation, delegation, and good communication skills. Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract. Proven track record of working within a large construction team. Good attention to detail when checking work and materials. And the ability to maintain quality standards in a high-pressure environment. Able to establish appropriate working relationships with the contractors. Working knowledge of relevant British & European standards, construction and design codes/guidelines such as RCC-M, BS EN and ASME. Knowledge of the documentation used in safety critical construction and fabrication environments such as Inspection and Test Plans and End of Erection Status Reports. Experience in weld inspection on large construction projects. You may also have any of the following: Higher level qualifications in both welding (CSWIP 3.2, IWS etc.) and NDT (PCN or equivalent) would be desirable although are not essential for the fulfilment of this role. Experience in large power plant design, manufacture and construction. Good working knowledge of Quality Management practices, methods and processes. Knowledge of the fabrication and installation of pressure systems. TPBN1_UKTJ

Your new company Our client is the UK's leading engineering and infrastructure services providers, employing multidisciplinary technical professionals across the UK and Globe. With a strong track record of delivering major projects in highly regulated sectors, the organisation plays a pivotal role in supporting the UK's energy future through some of the most significant infrastructure developments currently underway. Your new role An exciting opportunity has arisen for a Commissioning Engineer to join the Balance of Plant team on the Hinkley Point C project in Somerset. Hinkley Point C is the first new nuclear power station to be constructed in the UK in more than 20 years and will provide low-carbon electricity to approximately six million homes.Reporting to the Commissioning Manager, you will play a key role throughout the commissioning lifecycle, combining technical engineering expertise with project delivery responsibilities. During the planning phase, you will review commissioning documentation, develop test specifications and prepare safety documentation. As the project progresses, you will support and lead commissioning activities on site, analyse test results and contribute to the safe transition of systems into commercial operation.Key responsibilities include: Developing commissioning documentation and reviewing contractor-produced commissioning records. Supporting detailed commissioning, planning and taking ownership of assigned test programmes. Executing and supervising commissioning activities on site. Ensuring commissioning deliverables are completed safely, on time and in accordance with project requirements. Supporting the analysis of commissioning results and resolving technical issues. Working closely with contractors and project stakeholders to facilitate successful commissioning activities. Supporting contractual reviews, acceptance activities and project milestone achievement. Promoting a strong safety culture and ensuring compliance with all quality and operational requirements. What you'll need to succeed To be considered for this role, you should have: A degree or equivalent qualification in a relevant engineering discipline. Strong technical knowledge of mechanical and process systems. Excellent engineering problem-solving and analytical skills. Experience working within commissioning, operations, maintenance or major project environments. Good IT literacy, including Microsoft Excel, SharePoint, Adobe review tools and Microsoft Word. The ability to learn and utilise specialist project software platforms. Strong communication skills and the ability to collaborate effectively with contractors and multidisciplinary teams. A delivery-focused mindset with a proven ability to achieve project objectives. Demonstrable experience working within robust safety and quality cultures. Knowledge of permit-to-work systems and lock-out/tag-out procedures within heavy industrial environments. The following would be advantageous: Previous experience within the nuclear, power generation or wider energy sector. Knowledge of UK Power Industry Electrical and Mechanical Safety Rules. Experience working on large-scale infrastructure or commissioning projects. What you'll get in return Competitive salary and comprehensive benefits package. The opportunity to work on one of the UK's most significant infrastructure and clean energy projects. Long-term career development within a leading engineering organisation. Exposure to complex commissioning activities in a highly regulated environment. Ongoing training and professional development opportunities. The chance to contribute to the UK's low-carbon energy future while working alongside industry-leading professionals. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Role: Piping Completion Lead Position: Contract Location: Hinkley Point C, Somerset Duration: Ongoing Contract Day Rate: Up to £350 p/d PAYE + 36 days annual leave // Up to £475.72 p/d Umbrella Take Piping Systems From Installation Through to Commissioning Hinkley Point C is one of the UK's largest and most complex engineering and construction projects, and as installation activity continues to accelerate across site, we are looking for an experienced Piping Completion Lead to support the delivery of the Mechanical, Electrical and HVAC (MEH) programme. This is a senior, site-focused engineering position responsible for leading the engineering activities required to take major piping systems from installation completion through pressure testing, flushing, drying and preservation, ultimately achieving successful handover into Commissioning . With approximately 1,500 pressure-test loops per unit , this is a significant completions programme requiring strong technical knowledge, leadership and coordination across construction, engineering, quality and commissioning. We are particularly interested in hearing from experienced piping and mechanical professionals from highly regulated process industries including: Nuclear Oil & Gas Petrochemical Chemical Pharmaceutical Power Generation Water & Process Engineering Previous nuclear experience is advantageous, but candidates with strong transferable piping completions and pressure-testing experience from other major projects are encouraged to apply. The Role Reporting to the Piping Construction Engineering Manager, you will lead the engineering associated with piping completion activities across the project. Working closely with installation contractors, construction teams, engineering, project management and commissioning, you will establish and drive the strategy for the preparation and execution of pressure testing and subsequent completion activities. This is very much a front-line project delivery role. You will need to be comfortable operating in a fast-paced construction environment, resolving technical issues quickly and ensuring engineering does not become a constraint to site progress. Key Responsibilities You will: Lead the engineering strategy for the preparation and execution of on-site piping pressure testing. Coordinate the delivery of approximately 1,500 pressure-test loops per unit. Drive contractors to ensure pressure testing is prepared and executed safely and in accordance with required quality and nuclear safety standards. Oversee the preparation and review of pressure-test documentation, loop definitions, procedures and associated completion records. Coordinate post-test activities including flushing, drying, preservation and system handover. Manage interfaces between installation contractors, construction teams, Project Managers, Engineering, Building Leads, Commissioning and pressure-compliance stakeholders. Support the resolution of technical issues associated with temporary components, test boundaries, demineralised water, effluent treatment and exemptions. Ensure appropriate surveillance and technical review of pressure-test documentation and procedures. Develop completion and handover strategies including Lifetime Quality Records, open points and Commissioning acceptance requirements. Ensure commissioning and post-construction requirements are incorporated into the construction sequence. Coordinate engineering activities required to maintain construction progress and remove technical blockers. Support the development of KPIs to monitor construction and completion progress. Identify opportunities to improve engineering, completion and site processes. Lead, coordinate and develop engineers supporting the piping completion scope. About You We are looking for someone who understands what it takes to move complex piping systems through mechanical completion, testing and handover on a major engineering or construction project. You will ideally have significant experience involving: Piping installation Mechanical completion Hydrostatic / pressure testing Test packs Test boundaries Flushing Drying Preservation Quality documentation System handover Commissioning interfaces You should be able to demonstrate: Proven experience in a piping, mechanical completion, pressure-testing or commissioning-related position. Strong practical understanding of piping installation and completion activities. Experience delivering engineering within a major construction or process environment. Ability to coordinate multiple technical and construction interfaces. Experience resolving technical issues in a schedule-driven site environment. Strong leadership skills and the ability to coordinate engineers and multidisciplinary stakeholders. Ability to influence contractors, engineering teams, construction management and commissioning. A rigorous approach to engineering, safety, quality and documentation. Commercial and contractual awareness. Confidence working autonomously and making engineering decisions within delegated authority. Desirable Experience It would be advantageous if you also have: A degree or equivalent qualification in Mechanical Engineering or another relevant engineering discipline. Chartered Engineer status or progress towards professional registration. Nuclear or other highly regulated industry experience. Previous piping installation and/or commissioning experience. Knowledge of PWR systems or nuclear power generation. Knowledge of CDM Regulations. Experience working with major EPC, installation or mechanical contractors. French language capability. Transferable Industry Experience Welcomed You do not necessarily need to have spent your career in nuclear. Some of the strongest transferable candidates may come from environments where large process piping systems must be installed, inspected, tested, documented and handed over safely, including: Petrochemical plants | Refineries | Pharmaceutical facilities | Chemical plants | Power stations | Water treatment facilities | Major process plants | Oil & Gas projects If you have led piping completion, hydrotesting or commissioning-readiness activities on a major project, your experience could translate extremely well into this position. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base, from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Thanks Rullion Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. TPBN1_UKTJ

We're supporting a tier 1 supplier into the Nuclear industry in their search for Commissioning Engineer with a mechanical / process background. This is a permanent staff position based on site 5 days per week. This is a unique opportunity to play a key role in the delivery of the UK's first new nuclear power station in over two decades. Working as part of a high-performing commissioning team, you will support the safe and successful commissioning of plant systems, ensuring they are fully tested, validated, and ready for commercial operation. The role offers exposure to complex engineering challenges within a highly regulated environment and would suit candidates with commissioning experience gained within power generation, nuclear, oil & gas, petrochemical, water, utilities, or other heavy industrial sectors. Key Responsibilities Produce and review commissioning documentation, including test specifications and commissioning procedures. Support the planning and preparation of commissioning activities across assigned systems. Take ownership of commissioning test programmes and associated deliverables. Execute site commissioning activities safely and effectively. Supervise and coordinate contractor-led commissioning activities where required. Analyse test results, identify issues, and support technical resolution activities. Ensure commissioning deliverables are completed in accordance with project milestones, safety standards, and quality requirements. Support contractual reviews, acceptance testing, and handover activities. Work collaboratively with project stakeholders, contractors, and commissioning teams. About You Essential Requirements Degree qualified (or equivalent) in Mechanical, Process, Chemical, or a related Engineering discipline. Strong knowledge of mechanical and/or process systems. Experience within commissioning, testing, start-up, operations, maintenance, or project delivery environments. Strong problem-solving and technical troubleshooting skills. Experience working within highly regulated safety and quality-led industries. Excellent communication and stakeholder management skills. Strong IT literacy, including: Microsoft Excel SharePoint Microsoft Word Adobe Review & Comment tools Ability to work effectively both independently and as part of a multidisciplinary team. Desirable Experience Previous experience within nuclear, power generation, utilities, oil & gas, petrochemical, or heavy industrial environments. Knowledge of Permit-to-Work systems and Lock-Out/Tag-Out (LOTO) processes. Understanding of UK Mechanical and Electrical Safety Rules. Experience using engineering/project software such as Fieldview, Switch, or Navisworks

SHIFT ENGINEER – MULTI-SKILLED £53- 55k | 4 on / 4 off | 12-hour shifts Are you a hands-on Multi-Skilled Engineer who thrives on solving problems and keeping production moving? We’re looking for a skilled Shift Engineer to join our team, providing first-class mechanical and electrical engineering support across PET extrusion, thermoforming and manufacturing equipment. What you’ll be doing: Diagnose and repair mechanical & electrical breakdowns ⚡ Fault-find across motors, drives, sensors, pneumatics, hydraulics & controls ️ Complete planned and reactive maintenance Carry out root cause analysis and eliminate repeat failures Support start-ups, changeovers, upgrades and new equipment Drive reliability, TPM and continuous improvement What we’re looking for: Multi-skilled engineering experience with strong mechanical & electrical skills Manufacturing, FMCG, plastics, packaging or process industry experience Good fault-finding and problem-solving ability HNC, apprenticeship or equivalent engineering qualification PLC, PET extrusion or thermoforming experience is highly desirable What’s in it for you? 4 on / 4 off shift pattern – days & nights 23 days holiday + bank holidays, increasing with service Employer pension contribution 3% Life Assurance Company Sick Pay Medicash Health Care Cash Plan & Retail Discounts Occupational Health Nurse Cycle to Work Scheme Free parking & free eye test How to Apply If you're ready to take the next step in your career and join a company that truly values its people, we want to hear from you! Apply now via Indeed or Email your application to: (url removed) For more information, contact us on: (phone number removed) Allocation number: INDTB

Site Quality Engineer / QA-QC Engineer / Quality Inspector Hinkley Point C, Somerset | Hybrid Working Up to £70,000 + £5,420 Car Allowance + Benefits 9-Day Fortnight or 5-Day Working Week Available An exciting opportunity has arisen for a Site Quality Engineer to join a major engineering organisation delivering work on Hinkley Point C, one of the UK's largest and most significant infrastructure projects. Working within a highly regulated environment, you will play a key role in ensuring quality requirements are achieved throughout construction, installation and project delivery activities. This is an excellent opportunity to become part of a project that is helping shape the future of UK energy infrastructure while developing your career within a complex engineering environment. The role offers a blend of site-based, home-based and stakeholder-facing activities, providing genuine variety and long-term career development. Applications are welcomed from candidates within nuclear, defence, aerospace, rail, power generation, oil & gas, utilities, construction, infrastructure, manufacturing and other regulated sectors. The Role As Site Quality Engineer, you will support the Quality Manager and project teams in ensuring Project Quality Assurance requirements are effectively implemented and maintained. You will be responsible for supporting audits, inspections, quality documentation, non-conformance management, quality reporting and continuous improvement activities to ensure products and services are delivered Right First Time. Key Responsibilities Support the implementation and continual improvement of the Project Quality Management System (QMS) Maintain and update Contract Quality Assurance Plans (CQAPs) Plan, support and conduct internal, supplier and external audits Monitor audit findings and corrective actions through to successful close-out Support management of Non-Conformance Reports (NCRs) and corrective action plans Review and monitor Inspection & Test Plans (ITPs) Review quality records and ensure full traceability of completed works Monitor End of Manufacturing Reports (EoMRs), construction status reports and handover documentation Support quality release of equipment and project handover activities Produce, analyse and report Quality KPIs and performance metrics Interface with client quality representatives and project stakeholders Promote a strong quality and nuclear safety culture across project activities Support continuous improvement initiatives throughout the project lifecycle Requirements ISO 9001:2015 Lead Auditor qualification Experience within Quality Engineering, Quality Assurance, QA/QC or Inspection roles Strong understanding of quality systems, inspection processes and auditing principles Experience managing NCRs, corrective actions and quality improvement activities Ability to analyse quality data and produce KPI reporting Experience working within engineering, manufacturing, construction or other regulated industries Degree qualified in Engineering, Quality, Manufacturing, Business or a related discipline, or equivalent industry experience Desirable Experience -Experience on major engineering, infrastructure or EPC projects -Nuclear industry experience -Knowledge of ISO 19443 and other regulated industry standards -Experience with 8D, Root Cause Analysis and continuous improvement methodologies -Understanding of document management systems and lifetime quality records -Experience working with multidisciplinary project teams -Knowledge of nuclear site licence conditions What's on Offer? Salary up to £70,000 £5,420 Car Allowance Hybrid Working 9-Day Fortnight or 5-Day Working Week Long-term project pipeline Exposure to one of the UK's most significant infrastructure developments Excellent career progression opportunities Opportunity to work within a highly regulated engineering environment * Collaborative and supportive project team This opportunity would suit a Site Quality Engineer, Quality Engineer, QA Engineer, QA/QC Engineer, Construction Quality Engineer, Field Quality Engineer or Quality Inspector looking to take the next step in their career on a major UK infrastructure project

Role: Field Engineer - NDT & Welding Inspector Position: Contract Location: Hinkley Point C, Somerset Duration: Ongoing Contract Day Rate: Up to £350 p/d PAYE + 36 days annual leave // Up to £475.72 p/d Umbrella Play Your Part in Building the Future of UK Energy Are you a CSWIP 3.2-qualified inspector with practical welding knowledge and experience of NDT under UK PCN requirements? Bring your expertise to Hinkley Point C and help ensure critical construction work meets the standards demanded by a major nuclear project. Rullion is recruiting a Field Engineer - Welding & NDT Inspector to join the site's construction surveillance team. This is a field-based opportunity for someone who enjoys being close to the work: inspecting installations, engaging with contractors and identifying quality issues before they become bigger problems. We welcome applications from candidates across nuclear, pharmaceutical, petrochemical, chemical and water industries, alongside other regulated engineering and construction environments. If you understand welding quality, inspection discipline and the importance of traceable records, your experience could transfer well to this role. The Opportunity Reporting to the Construction Superintendent, you will provide independent surveillance of welding, fabrication and construction activities, checking that work complies with approved drawings, contractual requirements and quality arrangements. You will combine technical judgement with a practical approach to contractor relationships-challenging concerns clearly, supporting their resolution and helping maintain a strong nuclear safety culture. Key Responsibilities Carrying out field surveillance of welding, fabrication and installation activities against approved requirements, inspection plans and applicable codes. Reviewing welding and NDT inspection evidence, identifying discrepancies and ensuring concerns are escalated appropriately. Raising Non-Conformance Reports and monitoring corrective actions through to satisfactory closure. Checking contractor compliance with authorised Quality Control Plans and Inspection and Test Plans. Ensuring required inspection records are completed, reviewed and agreed before works are covered up. Maintaining accurate, concise site diaries and surveillance reports, contributing to quality reporting and project KPIs. Working closely with contractors, construction teams and quality stakeholders to anticipate issues and support timely resolution. Ensuring proposed changes follow formal review and approval processes, with no unauthorised design decisions made in the field. Planning and conducting surveillance in line with site health, safety and environmental requirements. About You A current CSWIP 3.2 Senior Welding Inspector qualification as a minimum. Practical NDT experience and a sound understanding of UK PCN certification requirements, including current PCN Level 2 Ultrasonic Testing (UT) Hands-on welding or fabrication experience, supported by a strong track record of weld inspection on construction or engineering projects. A qualification in mechanical engineering, materials or welding, or equivalent vocational training and relevant experience. Working knowledge of metallurgy, welding processes, weld defects and the application of NDT. Experience applying relevant British, European or international construction and design codes, such as BS EN, ASME or RCC-M. Confidence interpreting construction drawings, inspection plans and quality records within a safety-critical environment. Experience identifying non-conformances, producing clear inspection reports and following corrective actions through to completion. The confidence to challenge work constructively and build effective relationships with contractors and site teams.Experience that would strengthen your application PCN Level 2 certification in a surface inspection method, such as Magnetic Particle Testing (MT/MPI) or Penetrant Testing (PT/DPI). Inspection experience involving pressure systems, pipework, mechanical equipment or associated fabrication. Previous involvement in major power generation or nuclear construction projects. Familiarity with quality management processes and construction completion documentation. What's In It For You Opportunity to contribute to the UK's most complex and high-profile clean energy project. Work alongside some of the most skilled professionals in the industry. Gain exposure to cutting-edge construction and engineering methods. Develop your career within one of the world's most demanding project environments. Competitive day rate and long-term contract potential. If you've built refineries, energy-from-waste plants, pharmaceutical clean facilities, water treatment works or petrochemical units - this is the next level of technical challenge. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base, from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Thanks Rullion Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Supplier Quality Engineer | Quality Assurance | Nuclear Engineering Project Hinkley Point C, Somerset / Hybrid Working Up to £70,000 + £5,420 Car Allowance + Benefits 9-Day Fortnight Available An excellent opportunity has arisen for a Supplier Quality Engineer to join a major engineering organisation delivering work on Hinkley Point C, one of the UK's largest and most significant infrastructure projects. This role offers the opportunity to work at the forefront of a highly regulated engineering environment, helping ensure quality standards are achieved throughout a complex international supply chain supporting the delivery of critical nuclear infrastructure. The position combines hybrid working with supplier visits and site-based activities, offering a varied role with significant stakeholder engagement and long-term career prospects. Candidates from nuclear, defence, aerospace, rail, power generation, oil & gas, heavy engineering, manufacturing or other regulated industries are encouraged to apply. The Role As Supplier Quality Engineer, you will be responsible for supporting supplier quality assurance, supplier development and quality improvement activities across the project supply chain. Working closely with procurement, engineering, manufacturing and construction teams, you will ensure suppliers consistently meet project quality requirements while supporting continuous improvement and performance enhancement initiatives. Key Responsibilities Qualify, assess and approve suppliers against project quality requirements Conduct supplier audits and monitor supplier compliance Manage supplier performance and support supplier improvement plans Investigate non-conformances and drive robust corrective actions Facilitate root cause analysis and continuous improvement activities Support supplier down-selection activities through PQQ and tender evaluations Review and monitor Contract Quality Assurance Plans (CQAPs) Review Inspection & Test Plans (ITPs) and manufacturing quality documentation Support source inspection and manufacturing surveillance activities Participate in supplier kick-off meetings and quality reviews Work with project teams to identify and mitigate quality risks across the supply chain Promote a strong quality culture and positive nuclear safety behaviours Requirements ISO 9001:2015 Lead Auditor qualification Experience within Supplier Quality, Quality Assurance or Quality Engineering Experience conducting supplier audits and managing audit findings to closure Strong understanding of manufacturing, fabrication, inspection and quality control processes Experience managing supplier performance and corrective actions Knowledge of root cause analysis and continuous improvement methodologies Ability to work effectively with suppliers and multiple project stakeholders Degree qualified or equivalent industry experience Desirable Experience -Nuclear sector experience -CQI, IRCA, ASQ CQE or similar professional membership -Experience supporting large-scale EPC, construction or engineering projects -Experience within highly regulated industries -Knowledge of manufacturing processes including fabrication, coating, NDT or complex engineered products What's on Offer? Salary up to £70,000 £5,420 Car Allowance Hybrid Working 9-Day Fortnight Option Major long-term infrastructure project Significant supplier-facing responsibility Excellent career development opportunities Opportunity to work within one of the UK's most highly regulated engineering environments This is an excellent opportunity for a Supplier Quality Engineer, Quality Engineer, Supplier Assurance Engineer, Vendor Quality Engineer or Manufacturing Quality Engineer looking to join a nationally important project and play a key role in driving quality performance across a complex engineering supply chain

Controls Engineer Bridgwater - Hybrid - Very Flexible £45,000-£50,000 + Car Allowance + Training + Progression + Hybrid + Flexible + Holiday Are you looking to join a world renowned company at the forefront of their industry, working on interesting full lifecycle projects? Do you want the chance to join a market leading company that always recognises good performance internally as well as offering extensive cross platform and ongoing training and development? This company specialise in the design, manufacture and commissioning of machinery to a wide range of manufacturing industries across the globe. They are the world's leading company in their field and are continuing their growth and expansion due to their reputation for excellent quality and standards. The Design team you would join are continuing to grow which would give opportunities to progress into Senior or Supervisory positions in the future. In this role you will be working in a multidisciplinary team to design and build machinery to customer specifications. Your role will include writing code for the new build machines from scratch, supporting with commissioning onsite and, ongoing fault finding and support. The role offers hybrid working, although they would like someone to be able to work from the Bridgwater office a few days a week. If you have knowledge of PLC systems, specifically Siemens Motion Control, the company will offer cross platform and ongoing training to enable you to become an expert in the field and further your career. This is the perfect role for someone with knowledge of Siemens PLC Software, looking to take the next step in their career, gain further training and have the opportunity to progress in the future. The role: Work in a team to complete machine builds to customer specifications Hybrid working with a few days a week in the Bridgwater office *Initial Design and Build, commissioning and ongoing support The person: Experience of Siemens Control Systems Knowledge of Motion Control *Offline programming would be an advantage but they are happy to speak to people with good hands on experience Commissioning Engineer, Controls, Software, Siemens, Motion Control, PLC, Automation, Service, Installation, Breakdown, International, World Wide, Field, Electrical, Mechanical, Engineer, Technician, Maintenance, Manufacturing, Fault Finding, Diagnostics, Test Engineer, Project Engineer, Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

My client is a leading contractor in the Steel frame and Groundworks sector. We are currently recruiting a Senior Engineer to complete an 16 month contract. Qualifications • Senior Engineer with experience on large industrial, logistics or commercial construction projects., • Strong knowledge of groundworks, drainage, reinforced concrete, steel frame and external works., • Experience managing QA procedures and ITPs., • Ability to interpret technical drawings and specifications., • Degree, HNC or HND in Civil Engineering (or equivalent)., • Valid CSCS Card., • Proficient with Leica or Trimble surveying equipment. Responsibilities • Lead all on-site engineering activities, including setting out and technical support., • Review and coordinate drawings, specifications and design information., • Oversee quality assurance procedures, Inspection & Test Plans (ITPs) and temporary works., • Produce and maintain accurate site records, including as-built drawings and technical documentation., • Ensure works are delivered in accordance with project specifications and programme requirements., • Monitor quality standards across all engineering activities., • Support the Site and Project Management team with technical expertise., • Promote and maintain the highest standards of health, safety and environmental compliance., • Coordinate subcontractors and resolve technical issues on site. The Next Steps: To apply for the role as a Site Engineer, click on the apply now button below and submit your CV for further information

Play a key role in delivering one of the UK's most significant clean energy projects at Hinkley Point C near Bristol, helping bring safe, low-carbon power to millions of homes for generations to come. This is an exciting opportunity for a Mechanical Commissioning Engineer based at Hinkley Point C (HPC), contributing to a landmark nuclear energy programme at a critical stage of delivery. Working within a highly skilled commissioning team, you will combine technical expertise with project delivery experience to support the safe and successful commissioning of major plant systems. If you are passionate about engineering excellence, problem-solving, and working on complex infrastructure projects that have a lasting impact, this role offers outstanding professional development and long-term career opportunities. Key Responsibilities Develop and review commissioning documentation, test specifications, and safety documentation. Plan and coordinate commissioning activities while taking ownership of allocated test programmes. Execute mechanical and process system commissioning tests safely and effectively. Lead or support on-site commissioning activities and supervise contractor personnel where required. Monitor contractor-led commissioning works to ensure compliance with project standards and procedures. Analyse commissioning results and support readiness assessments for commercial operation. Resolve technical issues and implement effective engineering solutions. Support contractual review, acceptance, and commissioning verification activities. Provide progress updates and technical information to the Commissioning Manager. Ensure commissioning deliverables are completed on time and in line with project requirements. Qualifications & Requirements Degree qualified, or equivalent, in a relevant engineering discipline. Strong technical knowledge of mechanical and process systems. Proven engineering problem-solving and analytical skills. Experience working within safety-critical or highly regulated environments. Demonstrable commitment to safety and quality standards. Strong ICT literacy, including Excel, SharePoint, Adobe, and Microsoft Office applications. Ability to quickly learn and utilise specialist project software platforms. Excellent communication and stakeholder management skills. Collaborative approach with experience working alongside contractors and multidisciplinary teams. Knowledge of permit-to-work and lock-out/tag-out systems; power generation experience is advantageous. What's in it for you? The nuclear energy sector offers the opportunity to work on some of the UK's most technically advanced and nationally important engineering programmes. With significant investment in clean energy infrastructure, the industry provides long-term career stability, exposure to innovative technologies, and the chance to contribute directly to the UK's low-carbon future and energy security. Based at the Hinkley Point C site 5 days per week Work on one of the UK's largest and most prestigious infrastructure programmes. Excellent long-term career prospects within a growing industry. Exposure to complex and technically challenging engineering systems. Opportunities for professional development and career progression. Collaborative working environment with industry-leading experts. Gain valuable experience within a highly regulated sector. Contribute to the UK's clean energy and sustainability goals. Develop expertise across commissioning, operations, and project delivery. Company Overview Our Client is a leading engineering and project delivery organisation supporting some of the world's most complex energy and infrastructure programmes. Renowned for technical excellence, innovation, and a strong safety culture, they provide employees with the opportunity to work on projects that deliver lasting benefits to communities and future generations. Our Client promotes a collaborative and inclusive environment where continuous learning, professional growth, and knowledge sharing are actively encouraged, enabling engineers to develop rewarding and successful careers. Apply Now If you are a motivated Mechanical Commissioning Engineer looking to make an impact on a major clean energy project at Hinkley Point C near Bristol, we would love to hear from you. Apply directly via LinkedIn today. Please note that we are unable to offer visa sponsorship for this role. All applicants must have the existing right to work in the UK

The Opportunity As a Commissioning Engineer, you will play a key role throughout the commissioning lifecycle, combining technical expertise with project delivery responsibilities. You will support the planning and preparation of commissioning activities, review commissioning documentation, execute testing activities, and analyse results to demonstrate system readiness for safe operational handover. Working closely with project teams, contractors and stakeholders, you will help ensure that commissioning activities are delivered safely, efficiently and in accordance with project requirements, quality standards and regulatory expectations. Your duties and responsibilities will be · Develop commissioning documentation, including test specifications, procedures and safety-related documentation. · Review and assess contractor-produced commissioning documentation and test records. · Contribute to detailed commissioning plans and take ownership of designated testing programmes. · Execute commissioning tests and support the safe delivery of site-based commissioning activities. · Monitor and supervise contractor-led commissioning activities where required. · Analyse commissioning results, identify issues, and support the implementation of corrective actions. · Ensure commissioning deliverables are produced on schedule and meet project, quality and safety requirements. · Support contractual reviews, inspections and acceptance activities. · Provide regular updates and technical input to Commissioning Managers and wider project teams. · Promote and maintain high standards of safety, quality and compliance throughout all commissioning activities. You will have the following qualifications & experience: · Degree qualified (or equivalent) in a relevant engineering discipline. · Strong technical knowledge of Mechanical and Process Systems with excellent engineering and problem-solving skills. · Experience planning, coordinating or executing commissioning activities within complex industrial or engineering environments. · Strong IT skills, including proficiency with Microsoft Office applications and experience using document management, collaboration and engineering software tools. · Excellent communication and stakeholder management skills, with the ability to present technical information clearly and effectively. · Ability to work collaboratively within multidisciplinary teams and alongside contractors and suppliers. · Demonstrable track record of delivering work to schedule while maintaining high standards of quality and safety. · Experience working within robust safety and quality-driven environments. · Knowledge of permit-to-work systems, isolation procedures and lock-out/tag-out (LOTO) processes within heavy industrial settings. · Experience or knowledge of electrical and mechanical safety rules within power generation, energy, process, nuclear or similar regulated industries would be advantageous. Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. If you require any adjustments at any stage, please let us know and we’ll do our best to accommodate. Millbank operates as both an Employment Agency and an Employment Business

4 on 4 off (days and nights) Company Overview Our client is a well-established manufacturing business operating within a fast-paced packaging environment. With a strong focus on reliability, continuous improvement and operational excellence, the site relies on a skilled Engineering team to keep production equipment running safely and efficiently. The business is investing in the ongoing development of its engineering function and offers engineers the opportunity to work with modern manufacturing technology, develop their technical skills and contribute to reliability and continuous improvement initiatives. Role Overview They are looking for a Multi-Skilled Shift Engineer to join the Engineering team and provide first-response support across a busy manufacturing operation. This is a hands-on role requiring strong mechanical and electrical fault-finding skills. You will respond to equipment breakdowns, carry out running repairs and planned maintenance, identify recurring issues and support improvements to equipment reliability. Responsibilities • Provide first-line engineering response to equipment breakdowns across production., • Diagnose, test, repair and maintain mechanical and electrical equipment., • Carry out reactive maintenance and running repairs to minimise production downtime., • Complete planned preventative maintenance and accurately update CMMS records., • Service, adjust and repair machinery using safe engineering practices., • Support production start-ups, shutdowns, changeovers and line optimisation., • Carry out root cause analysis to prevent recurring equipment failures., • Support the installation, upgrade and commissioning of new equipment., • Work with OEMs and external suppliers to resolve technical issues., • Support TPM, Operational Excellence and continuous improvement initiatives. Requirements • Multi-skilled engineering background with both mechanical and electrical fault-finding capability., • Previous experience within manufacturing, FMCG, plastics, packaging or another process environment., • Strong fault diagnosis and problem-solving skills., • Experience working with equipment such as: Motors, Drives, Sensors, Pneumatics, Hydraulics, Control systems, • Ability to read engineering drawings and technical documentation., • Experience using a CMMS or computerised maintenance management system., • Engineering apprenticeship, HNC or equivalent engineering qualification. Desirable Experience • PLC fault finding, • TPM or Continuous Improvement, • Equipment installation and commissioning, • HMI, SCADA, Fieldbus or Drives Benefits & Development • Opportunity to develop your career within a specialist manufacturing environment., • Ongoing mechanical and electrical skills development., • OEM equipment training., • Operational Excellence and Continuous Improvement training., • CMMS and engineering systems training., • HMI, SCADA, Fieldbus and Drives training. This is a great opportunity for a Multi-Skilled Maintenance Engineer who enjoys being hands-on, solving problems and taking ownership of equipment reliability. Apply Here

Role: Piping Completion Lead Position: Contract Location: Hinkley Point C, Somerset Duration: Ongoing Contract Day Rate: Up to £350 p/d PAYE + 36 days annual leave // Up to £475.72 p/d Umbrella Take Piping Systems From Installation Through to Commissioning Hinkley Point C is one of the UK's largest and most complex engineering and construction projects, and as installation activity continues to accelerate across site, we are looking for an experienced Piping Completion Lead to support the delivery of the Mechanical, Electrical and HVAC (MEH) programme. This is a senior, site-focused engineering position responsible for leading the engineering activities required to take major piping systems from installation completion through pressure testing, flushing, drying and preservation, ultimately achieving successful handover into Commissioning. With approximately 1,500 pressure-test loops per unit, this is a significant completions programme requiring strong technical knowledge, leadership and coordination across construction, engineering, quality and commissioning. We are particularly interested in hearing from experienced piping and mechanical professionals from highly regulated process industries including: Nuclear Oil & Gas Petrochemical Chemical Pharmaceutical Power Generation Water & Process Engineering Previous nuclear experience is advantageous, but candidates with strong transferable piping completions and pressure-testing experience from other major projects are encouraged to apply. The Role Reporting to the Piping Construction Engineering Manager, you will lead the engineering associated with piping completion activities across the project. Working closely with installation contractors, construction teams, engineering, project management and commissioning, you will establish and drive the strategy for the preparation and execution of pressure testing and subsequent completion activities. This is very much a front-line project delivery role. You will need to be comfortable operating in a fast-paced construction environment, resolving technical issues quickly and ensuring engineering does not become a constraint to site progress. Key Responsibilities You will: Lead the engineering strategy for the preparation and execution of on-site piping pressure testing. Coordinate the delivery of approximately 1,500 pressure-test loops per unit. Drive contractors to ensure pressure testing is prepared and executed safely and in accordance with required quality and nuclear safety standards. Oversee the preparation and review of pressure-test documentation, loop definitions, procedures and associated completion records. Coordinate post-test activities including flushing, drying, preservation and system handover. Manage interfaces between installation contractors, construction teams, Project Managers, Engineering, Building Leads, Commissioning and pressure-compliance stakeholders. Support the resolution of technical issues associated with temporary components, test boundaries, demineralised water, effluent treatment and exemptions. Ensure appropriate surveillance and technical review of pressure-test documentation and procedures. Develop completion and handover strategies including Lifetime Quality Records, open points and Commissioning acceptance requirements. Ensure commissioning and post-construction requirements are incorporated into the construction sequence. Coordinate engineering activities required to maintain construction progress and remove technical blockers. Support the development of KPIs to monitor construction and completion progress. Identify opportunities to improve engineering, completion and site processes. Lead, coordinate and develop engineers supporting the piping completion scope. About You We are looking for someone who understands what it takes to move complex piping systems through mechanical completion, testing and handover on a major engineering or construction project. You will ideally have significant experience involving: Piping installation Mechanical completion Hydrostatic / pressure testing Test packs Test boundaries Flushing Drying Preservation Quality documentation System handover Commissioning interfaces You should be able to demonstrate: Proven experience in a piping, mechanical completion, pressure-testing or commissioning-related position. Strong practical understanding of piping installation and completion activities. Experience delivering engineering within a major construction or process environment. Ability to coordinate multiple technical and construction interfaces. Experience resolving technical issues in a schedule-driven site environment. Strong leadership skills and the ability to coordinate engineers and multidisciplinary stakeholders. Ability to influence contractors, engineering teams, construction management and commissioning. A rigorous approach to engineering, safety, quality and documentation. Commercial and contractual awareness. Confidence working autonomously and making engineering decisions within delegated authority. Desirable Experience It would be advantageous if you also have: A degree or equivalent qualification in Mechanical Engineering or another relevant engineering discipline. Chartered Engineer status or progress towards professional registration. Nuclear or other highly regulated industry experience. Previous piping installation and/or commissioning experience. Knowledge of PWR systems or nuclear power generation. Knowledge of CDM Regulations. Experience working with major EPC, installation or mechanical contractors. French language capability. Transferable Industry Experience Welcomed You do not necessarily need to have spent your career in nuclear. Some of the strongest transferable candidates may come from environments where large process piping systems must be installed, inspected, tested, documented and handed over safely, including: Petrochemical plants | Refineries | Pharmaceutical facilities | Chemical plants | Power stations | Water treatment facilities | Major process plants | Oil & Gas projects If you have led piping completion, hydrotesting or commissioning-readiness activities on a major project, your experience could translate extremely well into this position. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base, from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. Thanks Rullion Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

QC Engineer Location: Hinkley Point C, Somerset, England (On-Site) Job Type: Full-time Security Clearance: UK Background Check / Vetting Required About the Client: Our client is an international leader in industrial process design, fabrication, piping, and construction management. With a strong presence in high-specification sectors such as nuclear, energy, pharmaceuticals, and heavy industry, they are renowned for delivering complex, high-integrity mechanical and piping systems. They operate with a strong emphasis on operational satisfaction, quality assurance, safety, and employee development, fostering a culture of technical excellence and collaborative problem-solving across all project delivery teams. About the Opportunity: This role is based directly on-site at the landmark Hinkley Point C nuclear power station project in Somerset. Reporting to the Quality Manager, the QC Engineer will conduct inspections, quality surveillance, and non-destructive testing (NDT) oversight in strict accordance with the Project Quality Plan (PQP) and Inspection & Test Plans (ITPs). You will play a vital role in validating welding procedures, reviewing Lifetime Records (LTRs), auditing sub-contractors, and ensuring all fabrication and mechanical works comply with rigorous nuclear specifications. Key Responsibilities: Quality Control, Inspections & Testing Plan Implementation: Ensure the Project Quality Plan (PQP) and Inspection & Test Plans (ITPs) are written, aligned with project requirements, and rigorously implemented across site activities. Welding & NDT Surveillance: Review and verify that welding procedures, qualification records, and non-destructive testing meet code and contractual standards. Equipment Verification: Review test and calibration equipment to guarantee full compliance with project and company standards. Documentation, Certification & LTRs Lifetime Records (LTRs): Conduct final reviews of all fabrication, assembly, and quality documentation prior to formal submission to the main client. Document Control: Issue required quality documentation to Document Control for formal client review and approval. Personnel Competency Files: Collate and maintain up-to-date SQEP (Suitably Qualified and Experienced Person) records for project personnel. Supply Chain, Audits & Non-Conformance Auditing & NCRs: Conduct internal and external audits of work packages, suppliers, and sub-contractors. Issue Non-Conformance Reports (NCRs), analyse root causes, and ensure timely closure. Approved Supplier List: Maintain and evaluate documentation for the Approved Supplier Listing, reviewing quality questionnaires and supporting compliance records. Stakeholder Interface: Act as a key quality interface, liaising directly with sub-contractors, site managers, and client representatives to ensure quality processes run concurrently with construction progress. Candidate Profile: Qualifications & Technical Certifications CSWIP 3.1: Minimum requirement (Welding Inspector certification). PCN Level 2 Certifications: Qualifications in Magnetic Particle Inspection (MPI), Ultrasonic Testing (UT), or Radiographic Interpretation (RI) are highly desirable. Education & Training: Formal qualifications in Quality Assurance, Mechanical Engineering, or a related discipline. Requirements & Experience Welding Procedures: Advanced working knowledge of modern welding procedures, joint specifications, and NDT techniques within high-integrity industrial environments. Quality Management Systems: Proven experience conducting quality surveillance, site audits, and managing NCR processes on major industrial or infrastructure projects. Documentation Rigour: Demonstrated track record of managing Lifetime Records (LTRs), quality packages, and supplier compliance files. Industry Sector: Background in nuclear, power generation, heavy piping, or high-hazard regulated industries is strongly preferred. Key Competencies Communication Skills: Excellent interpersonal skills with the ability to liaise effectively across site managers, sub-contractors, and client representatives. Detail-Oriented: Exceptional precision and thoroughness when reviewing complex fabrication, NDT, and quality documentation