Trabajos welding en LincolnCrear alertas

Role : Project Quality Manager Location: Remote Home-based with quarterly travel (Travel locations will be Dublin Ireland, Berlin, Germany and other countries across Europe) Contract: Outside IR35 (Limited contract) Contract duration: 12 months to start - project runs until the end of 2028.. Our Client is an Energy technology company are seeking to recruit Project Quality Manager.The role is for a contract position of 12 months Outside IR35. Our client has 150-year legacy of innovation and will focus on energy transformation, new technologies, decarbonization and Innovative leading-edge technology. Key Responsibilities • Interface with Customer to ensure all Quality Requirements are understood and added to controlling documentation as required., • Manage contract deliverables liaising with Engineering, Supply Chain Management, Manufacturing and Projects as necessary., • Produce and manage Project Quality Plans ensuring all inspections and tests are carried out during Engineering, Procurement, Manufacture and Assembly stages., • Ensure that all client Energy and Customer Witness Hold Points and Quality Record requirements are added to relevant Inspection and Test Plans., • Request Suppliers to produce Inspection and Test Plans for the control of Quality Inspections, Hold Points and Records for supplied goods., • Carry out Quality Reviews at Suppliers & ensure Quality Documentation submitted by the Supplier is complete and in compliance with contract., • Control ATEX requirements during equipment installation including the production of necessary documentation to demonstrate compliance., • Manage PED requirements including pressure equipment categorization and conformity assessment, • liaising with approval authorities where necessary to ensure compliance., • Manage NCRs including the validation of corrections and ensuring RCAs and Corrective Actions are completed and documented in preparation for Lessons Learned., • Review work content to ensure any Special Process ie Welding, NDT, Painting, Lifting requirements are pre-approved, activities and certifications are validated and relevant records produced., • Revision Service ITPs to reflect changes emerging during project., • Manage the compilation of a Manufacturing Record Book (MRB) for submission to the Customer as a permanent record of project quality. Qualifications & Experience • Essential: Significant experience managing of Major New Build Projects in Power Generation or similar Industries., • Practical experience of ATEX and PED., • Desirable: HND / Degree in Engineering; Lead Auditor qualification; formal ATEX / PED training; experience interacting with Approved Bodies., • Strong understanding of ATEX, PED, and ISO 9001. Ability to read and interpret engineering drawings and specifications. Strong leadership, communication, and stakeholder management skills. Interested in a fantastic career opportunity with a great pay rate? Apply now to set up an informal conversation with a member of our Recruitment team and find out more information! This vacancy is being advertised by Belcan

Job Advertisement: Welder Are you ready to take your career to the next level in the manufacturing industry? Our client is seeking a dynamic and experienced Pipefitting/Team Leader to join their innovative team! This is an exciting opportunity to lead and contribute to the manufacturing and installation of pipe assemblies on turbine package builds. If you have a passion for pipe manufacturing, fabrication, and team leadership, we want to hear from you! Job Title: Welder Location: Lincoln Main works Contract Details: Temporary (6-Month Contract with Potential for Extension) Salary: £30/hour (Probationary Rate, with potential for increase post-probation) Key Responsibilities: • Oversee the manufacturing and installation of pipe assemblies on turbine package builds., • Lead pipe manufacturing and fabrication efforts within module builds., • Coordinate combined test installations and manage decommissioning capabilities., • Actively engage in team leadership, guiding your team to meet production demands efficiently and effectively., • Utilize the "Team Leaders Duties" document (PR01) to foster team development and success., • Proven experience in pipe manufacturing, fabrication, and installation., • Strong welding skills, adhering to current Siemens Energy standards and specific specifications for special orders., • Ability to perform inspections on all manufactured welds to ensure quality and compliance., • Team leadership experience, with a knack for motivating and developing team members., • Be part of a vibrant and supportive work environment where your contributions truly matter., • Opportunities for professional growth and development within a thriving organization., • Work on exciting projects that challenge your skills and allow you to shine., • Competitive compensation and benefits package to reward your hard work. If you're an enthusiastic leader with a commitment to excellence in pipefitting and fabrication, this is your chance to make an impact! Apply now and be a part of a team that values innovation and teamwork. How to Apply: Ready to join our client's team? Send your resume and a brief cover letter outlining your relevant experience to [email address]. We can't wait to meet you! Join us and make a difference in the world of manufacturing! Please note if you do not hear back regarding your application within five working days you have unfortunately been unsuccessful currently, but we thank you for your interest. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser

Interaction Engineering Lincoln MIG/TIG Welder Fabricator We are recruiting on behalf of our client for an experienced and highly skilled MIG/TIG Welder to support their growing operations in Lincoln. This is a permanent position offering a competitive package, excellent working conditions, and a strong team environment. Role Overview: The successful candidate will be responsible for carrying out high-quality welding tasks on a variety of small to large fabrications using both ferrous and non-ferrous materials. The role requires an individual who can read and interpret complex engineering drawings and work with minimal supervision to meet tight tolerances and quality requirements. Key Responsibilities: Perform MIG and TIG welding on plate and pipework across various materials, including stainless steel, mild steel, and nickel alloys. Work from detailed engineering drawings to produce high-standard fabrications. Operate independently and as part of a team in a busy workshop environment. Adhere to safety protocols, using provided PPE and maintaining a clean, organised work area. Ensure all work is completed to company and industry standards, within specified tolerances. Candidate Profile: Time-served or experienced welder with a minimum of 2 years’ experience in a manufacturing or engineering setting. Strong proficiency in MIG and TIG welding techniques. Demonstrated ability to produce con...

Panel Beater Required, in Lincoln: Are you an experienced Panel Beater seeking a secure and rewarding opportunity in Lincoln? Our client, a respected leader in the Accident Repair industry, is looking to appoint a skilled Panel Beater to join their expanding team. This is an excellent chance to work with a well-established company that offers stability, competitive pay, and a supportive working environment. Benefits: Competitive basic salary up to £42,000 Centre Performance Bonus earning an OTE of approximately £48,000 Stable, secure employment with an established company Monday to Friday working hours, 8am – 5pm, with no weekends. 25 days holiday plus Bank Holidays Modern facilities with new equipment Opportunity to work for a reputable and growing Accident Repair organisation Supportive management and high staff retentionDuties: Repair all types of vehicles, including cars and vans, adhering to current industry standards. Carry out welding, spot welding, and panel repairs to a high standard Follow health and safety guidelines at all times Maintain cleanliness and organisation within your workspace Reduce wastage by efficient use of raw materials and consumables Assist in environmentally responsible disposal of waste products Work at a consistent pace without compromising quality or safety standardsRequirements: Time-served Panel Beater, qualified or ATA accredited. Previous experience working as a Pan...

Welder - Contract Position Location: Lincoln Employment Type: Contract (Inside IR35) Duration: 6 months rolling Belcan Workforce Solutions is seeking an experienced Welder to support fabrication and assembly activities on a major engineering programme based in Lincoln. This position involves high‑quality welding of pipe assemblies and fabrications, working to strict industry standards and supporting wider build activities as required. The Role Welding of pipe assemblies and fabrications to required standards, including special‑order specifications. Completing Casing Build rectification work where required. Inspection of ALL manufactured welds to ensure full compliance and quality. Supporting pipefitting activities in line with departmental agreements. Performing tack welding to assist pipefitting work when appropriate. Working in accordance with WPS 4000, WPS 4001 and WPS 4002. About You Proven welding experience within a fabrication, engineering or heavy‑industry environment. Ability to work to defined welding procedures and specifications. Flexible to support additional pipefitting tasks. Strong quality focus with excellent attention to detail. Reliable, team‑oriented and committed to safe working practices. This vacancy is being advertised by Belcan...

My job All the relevant skills, qualifications and experience that a successful applicant will need are listed in the following description. Multi-Skilled Engineer - Anwick Location: Anwick Shift Pattern: 4 days on, 4 off, 4 nights on, 4 off Hours: 05:30 - 17:30 (Days) 17:30 - 05:30 (nights) Job Purpose As a Multi-Skilled Engineer, you will provide an effective engineering service to the production team, responding promptly to breakdowns and maintenance needs. You will maintain equipment both proactively and reactively to ensure factory performance meets targets and KPIs. Your role will focus on improving equipment availability and performance to meet OEE targets, using the SAP PPM system for accurate recording of labour and parts. You will also deputise for the Engineering Team Leader when required. Key Responsibilities • Provide effective breakdown cover and carry out repairs to ensure optimum machine performance., • Perform planned maintenance and adjustments within your competence., • Diagnose and repair mechanical and electrical faults quickly and effectively., • Ensure all equipment operates efficiently and meets product specifications., • Work closely with the Engineering leadership team to escalate faults beyond your competence., • Comply with Health & Safety rules (including COSHH) and promote safe working practices., • Assist in training and assessing staff on machine operation., • Liaise with visiting engineers to ensure improvements deliver business benefits., • Complete all equipment documentation accurately and ensure proper filing., • Report non-conformances in machine performance promptly., • Use SAP PPM system for capturing engineering labour and parts., • Support production targets and continuous improvement initiatives.Health, Safety & Environmental Responsibilities, • Work safely and observe company Health & Safety rules., • Use Lock Out / Tag Off (LO/TO) system at all times., • Wear protective clothing and report hazards promptly., • Cooperate with managers to maintain a safe workplace., • Assist in accident investigations and promote safe behaviour., • NVQ Level 3 or equivalent (Mechanical or Electrical)., • Recognised UK qualifications., • Proven multi-skilled experience with strong electrical competence., • Previous experience in manufacturing operations., • Literacy and numeracy to National Level 2 Standard.Desirable:, • NVQ Level 4 or equivalent., • Experience in food processing or poultry machinery., • PLC knowledge and welding experience., • Knowledge of lean techniques and processes., • 17th/18th Edition qualification.

We are looking to strengthen our Construction team with a Mechanical Supervisor based within the Anglian Region The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. You will report directly to the M & E Manager/ Lead Site Supervisor and your role will supervise and control all mechanical site activities in the most efficient manner, to the specification and within the contract time without risk to the health and safety of all concerned and providing a quality end product, ensuring a Quality installation with all ITP,s completed as the work progresses. Key responsibilities will include: Support the Site Manager in maintaining a safe working environment for all employees, supply chain partners and visitors Ensure that all relevant HS&E documents are correctly recorded and reviewed when received and that they are the latest version Check that all relevant documents adequately describe the work to be carried out Review and comment on Method Statements and Work Instructions as required by the Project Execution Plan Supervise work to ensure that it is carried out in accordance with Method Statements and Work Instructions Record the progress of the works on record drawings or other suitable means when required Record all non-conformance and improvement opportunities and agree action with the person in charge of the works. About The Candidate Knowledge/Experience: Several years experience of working in the Energy sector. Understands pipework fabrication, welding and erection. Recognises quality welding. xrnqpay Can punch and snag pipelines in accordance with Isometric, GA and P&ID drawings. Education/Qualifications HNC / HND in Mechanical Engineering or good apprenticeship in pipework and welding along with experience SSSTS CSCS First Aider Packages include - A competitive salary Hybrid Working (Jobs needs dependent) Car/car allowance (Jobs needs dependent) 25 days holiday + Bank Holidays (with an additional 5 days available to buy) Contribution Pension scheme Life Assurance Health Insurance Private Medical Insurance

Maintenance Engineer (Electrical Bias) If you are interested in applying for this job, please make sure you meet the following requirements as listed below. Location: Gainsborough Hemswell Salary: £45,000£47,500 Hours: MonFri, 42 hrs (On call 1 in 5, or TOIL) Contract: Permanent, Full time Were looking for an electrically biased Maintenance Engineer to support a busy renewable energy processing site. Youll handle planned and reactive maintenance, keep critical equipment running safely, and help improve overall plant performance. Key Duties of thisMaintenance Engineer position: • Maintain and repair electrical and mechanical equipment, • Complete planned maintenance and respond to breakdowns, • Diagnose faults, carry out inspections, and log work accurately, • Support project work, contractor supervision, and stock control, • Level 3 engineering qualification (electrical preferred), • 18th Edition, • 1 year maintenance/engineering experience, • Able to read engineering drawings, • Experience with maintenance systems and permit to work Telehandler/Forklift/MEWP Welding/fabrication skills Benefits: • Pension, life assurance, health & wellbeing support, EAP, cash plan, cycle to work, extra leave options, sick pay, onsite parking, recognition schemes, referral bonus., • Salary & Progression:, • Starts at £45,000, rising to £47,500 after probation. INDMAN Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally, so if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. xrnqpay To see our other available vacancies please visit our website.

Role : Project Quality Manager Location: Remote Home-based with quarterly travel (Travel locations will be Dublin Ireland, Berlin, Germany and other countries across Europe) Contract: Outside IR35 (Limited contract) Contract duration: 12 months to start - project runs until the end of 2028.. Our Client is an Energy technology company are seeking to recruit Project Quality Manager. The role is for a contract position of 12 months Outside IR35. Our client has 150-year legacy of innovation and will focus on energy transformation, new technologies, decarbonization and Innovative leading-edge technology. Key Responsibilities Interface with Customer to ensure all Quality Requirements are understood and added to controlling documentation as required. Manage contract deliverables liaising with Engineering, Supply Chain Management, Manufacturing and Projects as necessary. Produce and manage Project Quality Plans ensuring all inspections and tests are carried out during Engineering, Procurement, Manufacture and Assembly stages. Ensure that all client Energy and Customer Witness Hold Points and Quality Record requirements are added to relevant Inspection and Test Plans. Request Suppliers to produce Inspection and Test Plans for the control of Quality Inspections, Hold Points and Records for supplied goods. Carry out Quality Reviews at Suppliers & ensure Quality Documentation submitted by the Supplier is complete and in compliance with contract. Control ATEX requirements during equipment installation including the production of necessary documentation to demonstrate compliance. Manage PED requirements including pressure equipment categorization and conformity assessment liaising with approval authorities where necessary to ensure compliance. Manage NCRs including the validation of corrections and ensuring RCAs and Corrective Actions are completed and documented in preparation for Lessons Learned. Review work content to ensure any Special Process ie Welding, NDT, Painting, Lifting requirements are pre-approved, activities and certifications are validated and relevant records produced. Revision Service ITPs to reflect changes emerging during project. Manage the compilation of a Manufacturing Record Book (MRB) for submission to the Customer as a permanent record of project quality. Qualifications & Experience Essential: Significant experience managing of Major New Build Projects in Power Generation or similar Industries. Practical experience of ATEX and PED. Desirable: HND / Degree in Engineering; Lead Auditor qualification; formal ATEX / PED training; experience interacting with Approved Bodies. Strong understanding of ATEX, PED, and ISO 9001. Ability to read and interpret engineering drawings and specifications. Strong leadership, communication, and stakeholder management skills. Interested in a fantastic career opportunity with a great pay rate? Apply now to set up an informal conversation with a member of our Recruitment team and find out more information! This vacancy is being advertised by Belcan

Panel Beater (Lincolnshire) Location: Lincoln Annual Salary: Up to £65,000 per year Hours: Monday to Friday 42.5h week Benefits: Excellent Time Saved Bonus Scheme with uncapped earning potential, 30 Days holiday and more. Join a state-of-the-art Bodyshop in Lincoln as a skilled and experienced Panel Beater / Panel Technician. This role is perfect for someone with ATA accreditation or NVQ Level 3 (or equivalent) who thrives in a fast-paced accident repair centre. You will be responsible for repairing damaged vehicles to manufacturer specifications using the latest tools and techniques. Key Responsibilities for Panel Beater / Panel Technician: Perform high-quality accident repairs, ensuring work meets manufacturer and customer standards Remove, repair, and replace damaged panels Use welding equipment, dent pullers, and filler techniques for panel repairs Align body panels and parts for assembly and ensure a perfect fit Work efficiently within a team to meet deadlines and production targets Maintain a clean, safe, and organized work environment Stay up to date with modern vehicle repair techniques and industry standards Skills and Qualifications for Panel Beater / Panel Technician: Recognised apprenticeship in Panel Beating or Vehicle Body Repair NVQ Level 3 / VCQ / SVQ / ATA accreditation or equivalent qualification Previous experience working as a Panel Beater / Panel Technician in a busy body shop Strong knowledge of modern repair techniques for minor and moderate crash repair Ability to work efficiently under pressure while maintaining high standards Self-motivated team player with a focus on customer satisfaction and bonus targets Click 'Apply Now' to take the next step in your career. INDBS

Pipe Fitter Rullion are currently recruiting for an experienced Pipe Fitter to join our leading Engineering client's team at their busy Lincoln Depot. Location: Lincoln Shift Pattern: 6am - 2:30pm Pay Rate: £30 per hour PAYE / £40.50 per hour Umbrella. Start Date: As soon as possible Role Overview/Duties: To be able to bend and form tubing using hand bending tools ranging from ¼"- 1" tube - Fabricating To bend and form 1"- 3" using machine tool process. specifications. Fitting, bending, forming and termination of small bore pipe work assemblies. Setting up pipe fabrications, tacking in position ready for welding. Assembly of pipe assemblies using "Swagelok" fittings. The ability to prepare and set up pipe fabrications (weld jointpreparation) to contract specific drawings and systems. To have knowledge and clear understanding of engineering drawings, schematics. Must be able to work under supervision by the Team leader/Cell Manager. To maintain good housekeeping and cleanliness within the department at all times and adhere to all current and new Health & Safety requirements. To be able to lift within the restraints of the Manual Handling policy. To have served a recognised Apprenticeship and attend Training courses when required.Skills Required: Power stations or and industrial background stainless steel and tubing background - 5 to 10 years experience. Good work ethic. Supervisorial experience is desirable.All PPE provided and Health and Safety explained before and on site. Rullion supports applications from a diverse talent pool. We welcome the opportunity to discuss flexibility requirements. If you require any reasonable adjustments to be made to enable you to participate in the recruitment process, please contact us on (phone number removed) RBoniface Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands, to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

We are currently recruiting experienced MIG & FCAW Welders to join a well-established engineering company supplying fabricated components to the offshore and subsea industries, with projects delivered to major international clients across Norway and Brazil. This is an excellent opportunity to join a highly respected fabrication facility known for its exceptional welding standards and extremely low weld failure rate. The business has built a strong reputation within the offshore sector for quality, precision, and reliability. The Role Working within a modern fabrication workshop, you will be responsible for welding structural and engineered components used within offshore and subsea applications. Work is carried out to high-quality industry standards, supporting projects destined for global energy clients. Duties include: MIG and FCAW welding on heavy engineered components Working from detailed engineering drawings and welding procedures Fabricating and welding parts for offshore and subsea equipment Maintaining high-quality weld standards in line with industry requirements Working as part of a skilled fabrication team within a structured workshop environment Candidate Requirements Proven experience in MIG and FCAW welding Background working within heavy fabrication, offshore, subsea, or structural environments Ability to read and work from technical drawings Previous coding would be advantageous, however not essential Welder Testing For previously coded welders whose certifications may have expired, the company offers on-site weld testing, providing a great opportunity to revalidate your skills and return to coded welding work. What’s on Offer Competitive hourly rate -£20.00 per hour PAYE Regular overtime opportunities Stable long-term work with a strong project pipeline Work for a high-quality manufacturer supplying global offshore markets Opportunity to complete on-site welding tests if previous codings have lapsed If you are a skilled MIG / FCAW welder looking to work on high-spec offshore fabrication projects, we would like to hear from you. Apply today or contact us for more information

Lincat - Production Operative About Us Lincat is a thriving manufacturing business, one of the world's leading names in commercial catering equipment with over 50 years’ experience delivering world-class innovation and product quality to its extensive customer base. Our company manufactures 50,000 products each year and exports to over 80 countries. At Lincat, quality is at the heart of everything we do, driven by our ongoing investment in research and development and a passionate team dedicated to serving our extensive global customer base. We have great products, great people, and great customers. About the Role We have an exciting opportunity for three Production Operatives to join our team. Working as a Production Operative in the Assembly area, you will have the opportunity to develop both new and existing skills through the manufacture of a variety of products to support the production of high-quality catering equipment. Hours of Work This is a full-time position, working Monday to Friday, from 6:00 am to 2:20 pm. Key Areas of Responsibility: • Accurately follow engineering drawings, instructions and wiring diagrams., • Use a variety of tools, machinery and equipment., • Achieve a skilled level of performance and demonstrate commitment, motivation, and a willingness to be trained in all areas of production., • Build complete products once fully trained., • Propose ideas and work with management to make quality and efficiency improvements., • Production Operatives may be required to work in any of the production areas such as laser, punch press, press brake operation, welding, assembly and stores., • Work flexibly, providing cover and carrying out any other duties which may be requested., • Work as part of a team and maintain good working relationships with team members and various internal departments., • Support the Team Coordinator to ensure that the team meet the required targets and quality standards. Desirable Experience: • Assembly, repair or maintenance of mechanical and electronic parts, • Press Brake Operation, • Folding, • CNC machine operation, • Forklift truck licence (Required for the Cutting/Processing role)., • TIG Welding Essential Knowledge and Skills: • Reasonable English and Numeracy skills., • Excellent manual dexterity and the ability to use a variety of tools and equipment., • Able to sustain the required working pace., • Hardworking, loyal and flexible attitude., • Organisational and time management skills and the ability to assess and manage priorities., • Communication and interpersonal skills, working effectively within a team., • Understanding of production processes., • Understanding of Health and Safety and security procedures

As a Welding Technical Lead Engineer at Hinkley Point C, you will be at the forefront of engineering delivery on a globally significant nuclear new build programme, shaping decisions that will influence the UK's energy landscape for decades to come. The role As Technical Lead Engineer, you will

Workshop Welding Supervisor A leading manufacturer of moulded plastic products is seeking a skilled and experienced workshop supervisor to lead their Mould Engineering team. You'll need strong technical knowledge of welding, fabrication, and tool repair, as well as proven people management skil

Field Engineer – Welding Inspector. Welding Inspectors / Field Engineers. Field Engineer – Welding Inspector, you will:.

Field Engineer – Welding Inspector – Nuclear Energy. This is your chance to bring your welding inspection expertise to a landmark nuclear new-build project that will power millions of homes for generations. Mechanical engineering, materials, or welding qualifications, or equivalent vocational tr

Welding InstructorDepartment: WEC Group Training Academy (MTL Rotherham) Salary:£36,000 basic (Neg DOE) Hours of work:37.

The business supplies and supports industrial equipment, welding systems and engineering solutions to manufacturing, fabrication and engineering customers across the UK.

Milton Keynes** £40,000 £50,000 per annum (depending on experience) An exciting opportunity has arisen to join a leading international engineering business as a Service Engineer specialising in welding equipment. Based in Milton Keynes, you will be responsible for the installation, servicing,

We are seeking an Assessor Trainer In Welding & Fabrication to join our team.

Maintenance Fitter (Welding) £35,000 - £38,000 (50k OTE) + Days Based + Monday - Friday + 2x Overtime + Bonuses + Training + Company Benefits Elland, West YorkshireAre you a Maintenance Fitter or similar from an Industrial / Mechanical Manufacturing background looking for a days-based, Monday to

Responsible Welding CoordinatorLocation: RugbyDuration: 3 - 6 monthsRate: negotiable on experienceInside IR35Our client is seeking an experienced Responsible Welding Coordinator for a 3-6 month contract based in Rugby. This is a key role supporting welding quality assurance, compliance, and process

We are an engineering and electron beam welding specialist looking for a motivated individual to join our small, friendly team. Previous experience with electron beam welding is not required, as full in-house training will be provided. Welding components using specialist equipment.

The role involves constructing a new tank, along with welding and fabricating different materials, including aluminium and stainless steel.

Proven ability to carry out welding tasks, including TIG and MIG, as required.

You will construct and assemble metal structures, reading blueprints and welding pieces together.

A specialist talent acquisition consultancy is seeking a Welding Inspector to conduct inspections on safety-critical rolling stock in a rail engineering environment.

The ideal candidate will perform complex welding tasks while also maintaining building and equipment functionality. A background in welding and facilities maintenance is essential, along with skills in plumbing and carpentry.

A growing family-owned company in Nottinghamshire is seeking a skilled Fabricator who will be responsible for fabrication assembly, including welding and ensuring quality standards. The ideal candidate will have proven MIG/MAG welding and fabrication experience, along with a strong understanding of

A leading energy solutions provider is seeking a Senior Materials Engineer – Welding & Manufacturing to ensure structural integrity in nuclear components.

A specialized engineering firm in the United Kingdom is seeking an experienced Welding Supervisor for an industrial project in Deeside. The successful candidate will supervise all welding activities, ensuring adherence to safety and quality standards. Responsibilities include providing technical gui

A leading Training Provider in King's Lynn seeks a Plant Mechanics Instructor (Welding & Fabrication) to deliver training to apprentices and commercial learners.

We are working with an education provider in the Merseyside area who are looking for a Welding Trainer to join their team on a full‑time and permanent basis. The successful candidates would be based at the education provider's centre in the Merseyside area, where they would be asked to deliver tra

The role involves supervising welding teams and ensuring high-quality fabrication while being hands-on in the workshop. Candidates must have experience in welding and managing teams.

Proven experience in a welding inspection or quality control role. Strong ability to interpret technical drawings and welding specifications. Identify defects and recommend corrective actions to maintain welding quality.

Would you like to be involved with supporting the development of qualifications in Fabrication & Welding? We are looking for Development consultants to join our team and be part of a growing network of associates.

A leading engineering solutions provider is seeking a Welding Supervisor to oversee operations for a large-scale infrastructure project in Canary Wharf, London. The successful candidate will supervise welding activities, ensuring compliance with quality standards and safety regulations. Responsibili

This role offers the opportunity to work on exciting projects while utilizing various welding techniques, including MIG, TIG, and Stick. The ideal candidate will have a proven background in welding and fabrication, with the ability to interpret technical drawings and maintain high-quality standards.

Required skills include mechanical expertise, basic welding, and fault-finding abilities.

We are a leading robotics welding company and are looking to recruit an experienced Electrical / Mechanical Service Engineer to join our growing team. This is an exciting opportunity to work with advanced robotic welding systems, offering excellent benefits, ongoing training, and long term career pr

A leading training organization is seeking a Welding Instructor to deliver practical training to apprentices. The ideal candidate will have strong knowledge of welding, a City & Guilds Craft Certificate, and a passion for teaching.

Candidates must have a background in heavy industrial machinery, along with welding and fabrication skills.

They are looking for experienced industry professionals ready to take the next step in their career as a Welding Instructor. No two days are the same, making the role of Welding Instructor a dynamic and rewarding opportunity for someone passionate about engineering and education. Strong knowledge of