Trabajos welding en NottinghamCrear alertas

Job Title: Plater/Welder Location: Gedling Salary: £35,000 Shift: DAYS A fantastic opportunity has arisen for an experienced Plater Welder to join a highly modern, fully automated, fast paced manufacturing facility. Following significant recent investment, this site represents one of the most advanced operations in its sector, offering long term stability, technical challenge and genuine progression opportunities. This role would suit a skilled Plater Welder who is looking to further develop technically within a heavy industrial environment, with clear pathways available into senior engineering or supervisory positions. The Job Role of the Plater/ Welder You will be responsible for carrying out fabrication, welding and structural repair work across a range of automated production plant and equipment. This will include heavy plate fabrication, structural modifications, reactive breakdown support and planned preventative maintenance tasks to ensure maximum uptime, safety and operational efficiency. Working closely with the wider engineering team, you will play a key role in maintaining site reliability standards while contributing to continuous improvement projects and plant upgrades. Sector – Engineering Non-Negotiable Requirements of the Plater/Welder: • Experience as Plater/Welder in an industrial environment, • Working for a market-leading manufacturing business., • Company benefits package including pension, life insurance, and gym access. For further details contact Joe McAuliffe at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Job Title: Welder FabricatorLocation: Nottingham, NG14Duration: Ongoing ContractShifts: DaysStart Date: MONDAY 02 MARCHPay Rate: £24 per hour (CIS), x1.25 Sat, x1.5 SunWe are currently recruiting for experienced Welder Fabricators for site-based work in Nottingham (NG14) on a long-term ongoing contract.START DATE MONDAY 02 MARCHYou will mainly be TIG welding on pipe, building a new production facility. Site work - New Production Facility, NG14 40-50+ hours per week Long-term ongoing contract Immediate starts available £24 per hour (CIS) Flat day shifts* OT available - x1.25 Sat, x1.5 SunRequirements: Valid CSCS Card - Essential IPAF - Desirable Experience TIG welding on pipe. Proven fabrication/welding experience.* Ability to work on-site safely and efficiently. --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.

Express Recruitment are excited to be working in partnership with one of the UK’s leading supply chain specialists of heavy industrial equipment and castings. Our client caters for growing worldwide sectors from mining to construction. Due to continued success they are keen to recruit a highly attentive and technically astute Global Manufacturing Quality Lead. The successful candidate will drive manufacturing process improvement operations throughout the business. This is a demanding and varied role that requires travel overseas to China and other parts of Asia to visit manufacturing facilities typically 3 to 4 times per year. In return you will receive a competitive starting salary of up to £50,000 D.O.E, 33 days holiday, a health cash plan, profit share scheme and additional leave for birthdays and Christmas shopping. Roles & Responsibilities • Ensure industrial parts and precision components are thoroughly assessed and inspected prior to exporting to suppliers, • Consult closely with customers to ensure any issues are resolved in an efficient and professional manner, • Coordinate risks and FMEAs to the Technical Director, • Take ownership of the implementation of CSR policies within all factories to protect employee welfare, • Investigate and implement Continuous Improvement and LEAN manufacturing techniques * Apply in depth knowledge of fabrication, casting, tooling and materials to vendor processes, • Prepare detailed product reports based on market research and competitor trends, • Attend and represent the company at educational workshops, • Travel to various manufacturing facilities throughout the UK and overseas to assist with process improvements Skills & Experience • HND or Degree in Manufacturing or Mechanical Engineering or a similar field, • Demonstrable background within product development and industrial manufacturing, • Proven knowledge of castings and heavy fabrication is strongly preferred, • Good understanding of applying FEA and FMEA analysis, • LEAN Manufacturing Champion with in depth understanding of Kaizen, 5s, Six Sigma, 8D, 5Y and Poka-Yoke, • Ability to read and interpret CAD drawings (CREO) * Capability of modifying 2D or 3D drawings is desirable, • Solid shopfloor experience with knowledge of milling, turning, grinding, fabrication and welding, • Flexible with UK and overseas travel, • Full UK driving licence and UK passport are essential About Express Recruitment Express Recruitment has been offering exceptional recruitment solutions across the East Midlands since 1987, “exceeding expectations every time” of over 267,000 candidates. We supply a diverse range of sectors including Engineering, Technology, Professional Services, Languages, Sales & Marketing, Call Centres, Commercial, Manufacturing, Local Authority, NHS, Education and Voluntary organisations. Find all of our current vacancies on 👉 Not quite found the right role for you yet? Let us do the scrolling for you! Your search for a new role has never been so easy, just fill in our contact form on or give us a call on 0115 924 0010 and we will do the rest for you. Vacancy Summary Hours: Monday to Friday, 9:00am to 5:00pm Salary: c£50,000 Per Annum D.O.E Location: Nottingham, Nottinghamshire Job Type: Permanent Unfortunately we are unable to contact all candidates due to the large volume of applications we receive. If you have not heard from a consultant within the next three days please assume that you have not been successful on this occasion. Please do not hesitate to apply for other suitable roles in the future. This vacancy is being advertised on behalf of Express Recruitment Ltd. The services advertised by Express Recruitment Ltd. are those of an Employment Agency.

Position: Head QHSE JD: • Bachelor’s Degree (B.Sc.) in Mechanical Engineering (mandatory), • IRCA‑approved and registered Lead Auditor (or equivalent) for at least one IMS standard:, • ISO 9001 (Quality Management), • ISO 45001 (Occupational Health & Safety), • ISO 14001 (Environmental Management), • International professional certifications in multi‑disciplinary areas such as:, • Welding, • Non‑Destructive Testing (NDT), • Painting / Coatings / Surface Protection (preferred), • Minimum 20 years’ experience in Quality & HSE Management within offshore oil & gas projects, • Experience across all project phases: concept, FEED, detailed engineering, and EPIC/execution, • At least 5 years in a senior QHSE leadership role with a major Operator, EPC/EPIC contractor, or international consultant, • Quality Manager / Head of Quality profile, • Looking for candidates who hold relevant certifications such as NACE and recognized welding qualifications, along with strong quality management experience. If the above JD suits your profile, kindly share me your resume on

Location: Gedling Salary: £37,000 - £39,500 Shift: 4 on 4 off DAYS A fantastic opportunity has arisen for an experienced Mechanical Fitter to join a highly modern, fully automated and fast paced manufacturing facility. This Mechanical Fitter position is based at a site that has recently benefited from significant investment, establishing it as one of the most advanced operations within its sector. The successful Mechanical Fitter will enjoy long term stability, ongoing technical challenge and genuine opportunities for career progression. This role would suit a capable Mechanical Fitter with strong mechanical and welding skills who is looking to further develop within a heavy industrial environment. The business offers clear progression routes, allowing the Mechanical Fitter to advance into senior engineering or supervisory positions over time. * Mechanical maintenance experience within an industrial factory or heavy engineering environment *

Maintenance Engineer £47,000 Bonuses Double Days (Days and Afternoons) – 8-Hour Shifts Mon–Fri – 39 Hours Per Week Nottingham Benefits Monday – Friday – No weekends – Early Finish on Fridays 33 Days Holiday (25 Banks) Overtime paid at 1.5X midweek, 2X Sat and Sun Production bonus (Paid Quarterly) The Opportunity An opportunity for a Mechanical Maintenance Engineer to join a busy operation. The role will be very hands on, and you’ll need a competency across a variety of machinery. - The machinery you will be working on will be a mix of automated machinery and heavy older machinery: Conveyors, presses, furnaces, robots, welding machines, laser machines, punch press machines, spray robots, air tools, sub-assembly lines and assembly lines mainly. Your job will be a mix of reactive/PPM and chance to undertake project work and progress within the company. Experience required: At least 3 years’ experience as a maintenance engineer Any experience with Robots is desirable A good methodical fault finder – use initiative, not afraid to ask questions Any Maintenance Engineer from any background encouraged to apply Get in touch with Josh Sharkey from Stirling Warrington regarding this maintenance opportunity INDSW...

Job Title: Welder Fabricator Location: Nottingham, NG14 Duration: Ongoing Contract Shifts: Days Start Date: MONDAY 02 MARCH Pay Rate: £24 per hour (CIS), x1.25 Sat, x1.5 Sun We are currently recruiting for experienced Welder Fabricators for site-based work in Nottingham (NG14) on a long-term ongoing contract. START DATE MONDAY 02 MARCH You will mainly be TIG welding on pipe, building a new production facility. • Site work - New Production Facility, NG14, • 40-50+ hours per week, • Long-term ongoing contract, • Immediate starts available, • £24 per hour (CIS), • Flat day shifts, • Valid CSCS Card - Essential, • IPAF - Desirable, • Experience TIG welding on pipe., • Proven fabrication/welding experience., • Ability to work on-site safely and efficiently. --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website. JBRP1_UKTJ

If you are an experienced Fabricator or Plater looking to join a growing company with a strong pipeline of work, high standards, and a people-first approach, we would like to hear from you. Fabricator Plater Bulwell, Nottinghamshire, (near M1 Junction 26) Full-time, permanent position Workshop-based role with regular overtime £16.50 - £19 per hour, dependent on experience Please Note: Applicants must be authorised to work in the UK Eagle (G.E.T.) Fabrications Ltd is a family-run steel fabrication business based in Bulwell, Nottinghamshire, just minutes from Junction 26 of the M1. Established in 2010, we have grown steadily into a trusted UK supplier of bespoke steel fabrications for sectors including quarrying, mining, recycling, and waste management. We are known for delivering complex, one-off fabrications to a consistently high standard. With no two jobs ever the same, our workshop offers varied, challenging, and rewarding work for skilled fabricators who take pride in what they do. Due to continued growth and an exceptionally strong order book, we are now looking to strengthen our workshop team with an experienced Fabricator / Plater to support current and upcoming workloads. The Role This is a full-time, workshop-based role suited to a confident and experienced fabricator/plater with a background in medium to heavy structural and bespoke steelwork. The position has been created to support a very busy order book and sustained demand across multiple projects. You will work as part of a close-knit workshop team, fabricating directly from engineering drawings and contributing to the successful delivery of high-quality, one-off fabrications for our customers. Extremely competitive rates of pay are available, dependent on experience. Overtime is regularly available, including weekends, along with opportunities for training, development, and long-term progression within the business. The Successful Candidate Will Have: Strong fabrication background essential – 4+ years' experience in structural and/or bespoke steelwork Proven experience working with both mild steel and stainless steel Skilled in marking out, cutting, drilling, profiling, and assembling complex parts Ability to read and interpret detailed engineering drawings Capable of building one-off items from scratch with minimal supervision Oxy/Propane cutting/burning experience MIG welding skills are beneficial, but not the focus of the role Confident using a wide range of hand tools and workshop equipment Excellent problem-solving ability and attention to detail Strong communication and teamworking skills Flexible and proactive attitude to meeting deadlines and adapting to workload Good knowledge of health & safety practices in a fabrication workshop Looking to develop a long-term career with a business that values its people Benefits: 28 days holiday Additional Christmas Closure - average of 3-4 days additional paid leave over the Christmas period Bereavement leave Company pension scheme Bonus scheme and performance-related bonuses Company events to foster team spirit Employee mentoring programme for development and progression Flexible time off for appointments Free on-site parking How to apply for the role: If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Welder Fabricator, Structural Fabricator, Plater Welder, Steel Fabricator, Heavy Fabricator, Workshop Fabricator, Sheet Metal Worker, MIG Welder, Structural Steel Worker, Mechanical Fabricator TPBN1_UKTJ

This could range from Gantry Crane to a Rolline Line, Straightening or Welding machine. Ideally, youll come from a production background because you will be operating a production line, but whats most important to us is that you know how to follow strict safety procedures.

MAG welding experience essential.

adi Mechanical Pipe Fitter Welders Locations - Rushden, East Staffordshire, Birmingham and Liverpool About the Role We are looking for experienced fabricator welders with strong backgrounds in stainless steel fabrication and process pipework installation within the food, beverage, and pharmaceutical sectors. The ideal candidate will be a time-served fabricator with proven experience in pipework and vessel fabrication. You should be capable of working independently, using your own initiative, and delivering high-quality work with minimal supervision. Specifically, your key responsibilities will include: • Workshop-based fabrication, sheet metal work and welding, • Site-based fabrication, machinery and pipework installations in the process industry, • Installing hygienic pipework, steam and condensate systems., • Primarily using TIG purge welding to deliver high-quality installations, • Fabricating and installing access platforms, machinery guarding and process equipment, • Carry out mechanical fitting, assembly, and maintenance tasks, • Perform fabrication tasks in the workshop and on-site, ensuring excellent quality and efficiency, • Assist in generating bills of materials, preparing RAMS, and purchase requisitions as needed About you • Completion of a recognised qualification or time-served apprenticeship in a relevant trade., • Proven experience in stainless steel fabrication and process installations., • Significant experience in welding and fabrication, including pipework and bracketry, • Ability to read and interpret engineering drawings and P&ID’S, • Excellent attention to detail and ability to work independently., • Sound understanding of Health and Safety regulations and best practices. The Benefits • The adi Pit Stop – savings and discounts portal with Reward Gateway, • Healthcare cash plan, • 24/7 GP helpline including private electronic prescription service, • Enhanced Employee assistance programme, • Cycle to work scheme, • Employee referral bonus of £500 for every successful new employee, • Generous holiday allowance, • Celebration days, • Company-wide Christmas party for employees and partners, • Annual employee awards, • Long service awards, • Free workwear The company Find out more about adi – ___ Other organisations may call this role a Mechanical Fitter, Pipework Fitter, Welder and Fitter or Mechanical Welder. adi Group is fully committed to the principle of equal opportunity in employment and seeks to ensure that the careers of all employees are determined solely on merit and opportunity and that judgement of employees are free from the effects of bias and prejudice. So, if you’re seeking your next challenge as a Fabricator Pipe Fitter Welder, please apply via the button shown.

We have Permanent and temporary positions Job Purpose Reporting to the Production Manager, the mechanical fitter duties include • working from drawings, and assembling new conveyors, material handling systems, chutes including motors, gearboxes, bearing, couplings, rollers etc. Key Objectives • Forklift trained within the last 3 years, • Experience (some or all) of Conveyors, Automation systems, Robotics, Special purpose machinery (including platforms and walkways), • Some Electrical knowledge Working hours: 7 am and 3:30pmMonday to Thursday and 7:00am to 2:30pm on Friday Workwear provided Overtime Paid at time and a half (where required) Eligibility for the company EV scheme Summary As a Mechanical Fitter, you will be integral to the assembly and fabrication of mechanical components, ensuring high-quality stan...

We have Permanent and temporary positions Job Purpose Reporting to the Production Manager, the mechanical fitter duties include • working from drawings, and assembling new conveyors, material handling systems, chutes including motors, gearboxes, bearing, couplings, rollers etc. Key Objectives • Forklift trained within the last 3 years, • Experience (some or all) of Conveyors, Automation systems, Robotics, Special purpose machinery (including platforms and walkways), • Some Electrical knowledge Working hours: 7 am and 3:30pmMonday to Thursday and 7:00am to 2:30pm on Friday Workwear provided Overtime Paid at time and a half (where required) Eligibility for the company EV scheme Summary As a Mechanical Fitter, you will be integral to the assembly and fabrication of mechanical components, ensuring high-quality standards are met. Reporting to the Engineering Supervisor, you will utilise core skills in hand tools, welding, and sheet metal work, while also leveraging premium skills in TIG welding. Your mechanical knowledge and basic math skills will aid in precise assembly and materials handling. Join our team to contribute to innovative projects and enhance operational efficiency in a dynamic environment focused on excellence and safety. JBRP1_UKTJ

Job Title: Plater/Welder Location: Gedling Salary: £35,000 Shift: DAYS A fantastic opportunity has arisen for an experienced Plater Welder to join a highly modern, fully automated, fast paced manufacturing facility. Following significant recent investment, this site represents one of the most advanced operations in its sector, offering long term stability, technical challenge and genuine progression opportunities. This role would suit a skilled Plater Welder who is looking to further develop technically within a heavy industrial environment, with clear pathways available into senior engineering or supervisory positions. The Job Role of the Plater/ Welder You will be responsible for carrying out fabrication, welding and structural repair work across a range of automated production plant and equipment. This will include heavy plate fabrication, structural modifications, reactive breakdown support and planned preventative maintenance tasks to ensure maximum uptime, safety and operational efficiency. Working closely with the wider engineering team, you will play a key role in maintaining site reliability standards while contributing to continuous improvement projects and plant upgrades. Sector – Engineering Non-Negotiable Requirements of the Plater/Welder: Experience as Plater/Welder in an industrial environment The ability to MIG/ARC Weld The Plater/Welder will benefit from: Working for a market-leading manufacturing business. Company benefits package including pension, life insurance, and gym access. Training and development opportunities. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Joe McAuliffe at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. TPBN1_UKTJ

Mechanical Fitter Supervisor | Conveyor Systems | Engineering & Manufacturing Location: Bulwell / Long Eaton area Job Type: Full-time, Permanent The Role We are recruiting an experienced Mechanical Fitter Supervisor to join a growing engineering and manufacturing business specialising in conveyor systems and material handling equipment. Reporting to the Production Manager, the Mechanical Fitter Supervisor will lead a team of fitters while remaining hands-on with the mechanical assembly of conveyors, automation systems, and special purpose machinery. This is an excellent opportunity for a time-served Mechanical Fitter with proven supervisory experience. Key Responsibilities * Supervise and lead a team of Mechanical Fitters / Assembly Technicians * Allocate workloads and oversee daily production within a manufacturing environment * Mechanical assembly of conveyor systems, material handling systems, chutes, motors, gearboxes, bearings, couplings, and rollers * Read and interpret engineering drawings and technical schematics * Assembly of sub-assemblies using hand tools, pillar drills, saws, punches, and workshop machinery * Ensure compliance with health & safety, quality, and production standards * Support training, mentoring, and development of engineering staff * Act as a key link between the shop floor and Production Manager Essential Skills & Experience * Mechanical Fitter Supervisor / Mechanical Team Leader experience (minimum 2 years) * Time-served Mechanical Fitter / Assembly Technician / Mechanical Engineer background * Previous experience within engineering, manufacturing, or industrial environments * Forklift licence (trained within the last 3 years) * Experience with some or all of the following: * Conveyor systems * Automation and robotics * Special purpose machinery * Platforms, walkways, and guarding systems * Basic electrical knowledge Desirable (not essential): * Welding experience (MIG / TIG / fabrication) Working Hours * Monday to Thursday: 7:00am 4:00pm * Friday: 7:00am 12:00pm Benefits * Full-time, permanent role * Overtime paid at time and a half * Workwear provided * Eligibility for the company EV scheme * Free on-site parking JBRP1_UKTJ

Technical Manager / Design Manager, £60,000, Commutable from Nottingham, Mansfield, Chesterfield • Newly created Design Manager / Technical Manager / Engineering Manager role to support continued business growth., • Industry leader within the commercial vehicle design and manufacturing sector. This Technical Manager / Design Manager job will suit: • Previous experience of working within a commercial vehicle manufacturing / heavy goods vehicle / coachbuilding or similar large vehicle design and manufacturing environment, • Previous experience of leading and managing design engineers / design engineering teams / engineering teams., • Strong mechanical engineering background (this is a metal fabrication, and welding manufacturing environment)., • Experience of using 3D CAD software (Autodesk Inventor experience advantageous but not essential)., • You will lead two design engineering teams through two direct reports across two separate sites. Both direct reports lead each local design engineering team (the total team size is approx. 15 Design Engineers across both sites)., • You will work closely with each Design Manager to support the efficient and effective running of their teams, ensuring design projects are delivered into production on time, and within budget., • You oversee all design / engineering resources and delivery of engineering work on a day-to-day basis across both sites. To apply, please send your CV to Luke Smith at Euro Projects Recruitment Ltd. Visit the Euro Projects Recruitment website to search our latest permanent, contract and interim vacancies. Please note that if you are not contacted within the next ten days then your application, on this occasion, has not been successful. We thank you for taking the time to apply. This job is posted by Euro Projects Recruitment, a recruitment consultancy specialising in engineering and manufacturing appointments from tool room to boardroom. We combine over 100 years of technical knowledge and recruitment expertise to introduce the best candidates to the best companies. We are passionate about your future and persistent in our efforts to secure you the right job. JBRP1_UKTJ

Aluminium Fabricator Our client is one of the UK's leading providers of high-quality signage and fabrication solutions. Location: Normanton (WF6) Hours are full time, Monday to Friday with some overtime at weekends. This is a temp to perm role for the right candidate. Salary is dependent on experience and to be discussed at interview. Role As an Aluminium Fabricator, you'll play a key role in producing and assembling aluminium and steel components to the highest standards of accuracy, durability, and finish. Working from technical drawings. We're looking for someone who is flexible, reliable, and committed and in return, a positive workplace where overtime is available when business demands require it. Key Responsibilities Fabricate and assemble aluminium and steel components with precision and accuracy. Carry out MIG work (and TIG where applicable) to ensure strength, durability, and a high-quality finish. Read and interpret technical drawings and specifications. Check completed work meets required standards for quality and durability. Follow internal production processes and update progress where required. Work closely with colleagues and supervisors to ensure smooth project completion.Requirements We're looking for a motivated Aluminium Fabricator with experience in MIG welding (and TIG desirable but not essential) to join a friendly fabrication department. Experience working with steel as well ...

HGV Technician We are recruiting for an experienced HGV Technician to work for our client who are in Nottingham. THE DUTIES: * Perform maintenance and repairs on Council Fleet Vehicles. * Repairing and replacing faulty components. * Prepare and present HGVs for MOT inspections and periodic safety checks. * Carry out welding, fabrication, and body repairs * Complete job cards, inspection sheets, and order parts as needed. * Maintain a safe, clean, and organised workshop. * You may also be asked to work on tipper trucks, plant equipment and cars/vans. ESSENTIAL QUALIFICATIONS: * Previous experience on HGV’s or Light Commercial Vehicles. * NVQ Level 3 or equivalent (Certificate required) * Full UK Driving Licence with Category C entitlement. THE HOURS: This is a Permanent role. Weekly rotating shifts: 37 hours per week. Monday – Friday: 6am – 2pm Monday – Friday: 8am – 4pm THE PAY: You will earn an hourly rate between £20 - £21 per hour. If you’re interested in this position, please give Louise a call, details are below: Louise Bowles Recruitment Consultant (phone number removed)...

Commercial Body Fitter / Fabricator (Coach Builder) – Nottinghamshire Basic: Circa £50,000 OTE: £55,000+ Monday to Friday – 8:00am to 5:00pm Overtime available at enhanced rateWe are recruiting for an experienced Commercial Body Fitter / Fabricator to join a busy and professional commercial bodyshop in Nottinghamshire. This position is ideal for a skilled, old-school coach builder who takes pride in high-quality workmanship and has strong experience working with light and heavy commercial vehicles. What’s in it for you: Basic salary circa £50,000 Monday to Friday working pattern Overtime available at enhanced rates Well-equipped commercial bodyshop Supportive and experienced team environment Ongoing training and development opportunitiesWhat you’ll be doing as a Coach Builder / Fabricator: Carrying out body fitting and fabrication work on light and heavy commercial vehicles Strip and refit of commercial vehicle body components Repairing and replacing panels, structural components, and bodywork Welding, fabrication, and coach building tasks to restore vehicles to manufacturer standards Working with workshop teams to ensure efficient turnaround times Ensuring all work is completed safely and to a high-quality finishWhat we’re looking for the Coach Builder / Fabricator role: Qualified Body Fitter, Fabricator, or Coach Builder Strong experience working on commercial vehic...

You will primarily be engaged in TIG welding on pipe as part of building a new production facility.

The role involves primarily TIG welding on pipe for a new production facility.

The role involves TIG welding on carbon steel pipes ranging from 0.

HGV TECHNICIAN £55,000+ OTE 1.5X OVERTIME NIGHTS - MONDAY TO THURSDAY We're proud to be partnered with a nationwide transport business, who are looking for skilled HGV Technicians ready to take the next step in their career at their first-class facility in Nottingham. The company is a well-established provider of HGV maintenance and repair services for over 40 years, working with one of the most recognised manufacturers in the world to keep their vehicles on the road. The role has a particular focus around the maintenance & repair of a fleet of trucks & trailers. We're looking for passionate people to join this mission and drive the business forwards; it's an opportunity to be a part of one of the fastest growing, most forward-thinking teams in the transport industry. The Requirements: • Qualification in Heavy Goods Maintenance or experience in a similar role • Strong understanding of routine truck & trailer repairs & servicing • Knowledge of electrical, mechanical and hydraulic fault diagnosis • Experience preparing trailers for MOT testing • Have own basic tools, with larger equipment provided on site • Exposure to elements of welding and metal working The Package: • £55,000+ earnings (OTE) • Overtime paid 1.5x hourly rate with plenty available • Monday to Thursday Nights • Life assurance • £1,000 refer a friend scheme • Opportunity to complete training such as IRTEC, LOLER & BPW If you're an experienced HGV Technician who is looking for a new challenge at a business who can help push them to the next level in their career, then this is the role for you. Apply today and a member of our recruitment team will reach out. If you're an automotive professional who doesn't reach the exact requirements for this role, we're confident given our experience and contacts within the automotive/logistics sector, that we can present you some alternative options. Please contact the team at NMS Recruit so we can work together and help find your next venture. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Job Title: Mechanical Fitter Location: Gedling Salary: £37,000 - £39,500 Shift: 4 on 4 off DAYS A fantastic opportunity has arisen for an experienced Mechanical Fitter to join a highly modern, fully automated and fast paced manufacturing facility. This Mechanical Fitter position is based at a site that has recently benefited from significant investment, establishing it as one of the most advanced operations within its sector. The successful Mechanical Fitter will enjoy long term stability, ongoing technical challenge and genuine opportunities for career progression. This role would suit a capable Mechanical Fitter with strong mechanical and welding skills who is looking to further develop within a heavy industrial environment. The business offers clear progression routes, allowing the Mechanical Fitter to advance into senior engineering or supervisory positions over time. Sector: Industrial Factory Maintenance Non-Negotiable Requirements of the Mechanical Fitter: Mechanical maintenance experience within an industrial factory or heavy engineering environment Hands on experience with pre-planned, reactive and breakdown maintenance in a fast paced industrial setting Strong welding and fabrication experience including heavy plate work Experience working on gearboxes, bearings, pumps, motors, chains and conveyor systems Requirements for the Mechanical Fitter: Proven mechanical fault finding and repair experience Ability to read and interpret mechanical drawings Experience working within a manufacturing or heavy industrial environment Experience working as a Mechanical Fitter or Maintenance Engineer in the UK Desirable Requirements for the Mechanical Fitter Apprentice trained or Level 3 Mechanical Engineering qualification Experience with hydraulics and pneumatics The Mechanical Fitter will benefit from: Working for a market-leading manufacturing business Company benefits package including pension, life insurance and medical care Training and development opportunities Clear progression routes into senior engineering positions If you are an experienced Mechanical Fitter looking for your next opportunity within a modern manufacturing environment, please click apply at the bottom of this advert. For further details, contact Joe McAuliffe at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 or every candidate we place in permanent employment who has been recommended by you. Terms and conditions apply. Please see our website for further details

PRODUCTION DESIGN ENGINEER - HEAVY ENGINEERING SANDIACRE, NG10 5AN (ONSITE) COMPETITIVE SALARY Are you a detail‑driven Production Design Engineer with a passion for creating clear, accurate, and efficient manufacturing instructions? Do you thrive on improving processes, solving engineering challenges, and collaborating across multiple functions to keep production running smoothly? If you're someone who combines strong technical expertise with a knack for coaching others, and you're ready to play a key role in shaping high‑quality manufacturing practices, this could be the perfect next step in your career. THE ROLE: As a Production Design Engineer you will be required to: Maintain and improve departmental systems, identifying opportunities for enhancement and driving continuous improvement. Apply strong product and manufacturing knowledge to create accurate, efficient manufacturing instructions and production routes. Support Operations and Manufacturing by resolving engineering compliance issues, addressing production queries, and escalating complex tasks where appropriate. Collaborate with Programming, Planning, and Service Delivery teams to ensure clear, timely exchange of technical information. Provide technical guidance, training, and support to team members, including leading the introduction of Manufacturing Instructions for new products. Produce precise routes and drawings for first‑of‑type products and review process data to ensure accuracy and consistency across production. THE CANDIDATE: The ideal Production Design Engineer: Previous experience of design in a manufacturing environment HNC (or equivalent) in Mechanical or Production Engineering. Strong ability to interpret and work confidently with technical drawings. Solid IT literacy, including proficiency in Microsoft Excel (VBA experience desirable). Exceptional attention to detail when producing engineering documentation. Strong data analysis skills with the ability to identify and drive process improvements. Proven problem‑solving ability and experience supporting issue resolution in a manufacturing environment. Effective time‑management and prioritisation skills. Ability to collaborate across multiple functions and build strong working relationships. Good understanding of manufacturing processes, routing principles, and engineering change controls. Familiarity with NCRs and engineering change processes. BENEFITS: Competitive salary + company bonus Tailored training and development, including company‑funded external qualifications where relevant Generous pension scheme with 7% employer contribution Life assurance at 3.5× your salary Employee Assistance Programme for confidential wellbeing support Discounted gym membership - up to 25% off at 4,000+ UK gyms Fuel card savings of 2-3p per litre at 3,500 stations, including BP, Esso and Shell Employee recognition schemes celebrating great work 33 days' holiday per year (inclusive of bank/public holidays) ABOUT PROGRESS RAIL: Progress Rail, a Caterpillar company, is one of the largest integrated and diversified providers of rolling stock and infrastructure solutions and technologies for the global rail industry. The company provides advanced EMD® locomotives, engines, and technologies, railcars, trackwork, fasteners, signalling, rail welding and Kershaw Maintenance-of-Way equipment, along with dedicated locomotive and freight car repair services, aftermarket parts support and recycling operations. Progress Rail's deep industry expertise ensures a commitment to quality through innovative solutions. With a global network across the United States, Canada, Mexico, Brazil, Germany, Italy, Australia, China, Germany, India, South Africa, the United Arab Emirates and the United Kingdom, we are committed to serving our customers. PROGRESS RAIL VALUES: Integrity - the power of honesty Excellence - the power of quality Teamwork - the power of working together Commitment - the power of responsibility Sustainability - the power of endurance EQUAL OPPORTUNITIES: Progress Rail is an equal opportunity employer. All qualified applicants will receive consideration for employment. We value and embrace diversity of thought, background and unique experiences and we pride ourselves on being an inclusive workforce and culture. HOW TO APPLY: To be considered for this role, please click on the link provided. If you would like any further information about this vacancy before applying, please feel free to contact Taher Rahman at our Sandiacre site. We would politely request no agencies please

CNC PROGRAMMER SANDIACRE, NG10 5AN (ONSITE) COMPETITIVE SALARY Are you a CNC Programmer looking to take full ownership of creating effective, high‑quality CNC programs across a variety of machines and controls? This role puts you at the centre of manufacturing excellence; interpreting design data, generating precise CNC programs using Siemens, Fanuc and Heidenhain systems, supporting NPI and prototypes, and ensuring every component meets tight tolerances and quality standards. You'll collaborate closely with production, quality, and engineering teams, troubleshoot live machining issues, create tooling and work instructions, and play a key part in optimising processes and improving productivity. If you're hands‑on, detail‑driven, and ready to influence how parts are made from concept to production, this is the opportunity for you. THE ROLE: As a CNC Programmer, you will be required to: * Interpret design data and generate clear manufacturing instructions and CNC programs using Siemens NX, Fanuc, Heidenhain, Creo, AutoCAD and CAD/CAM software. * Test and prove programs to full production status, and complete weekly program backups. * Create tooling drawings and develop work instructions or procedures that support efficient manufacturing. * Support production when needed, operating CNC machines within training and troubleshooting machining or programming issues-including making on‑control edits to maintain workflow. * Manage tooling, materials and equipment, ensuring they are well‑organised, maintained and available to keep processes running smoothly. * Support Design for Manufacture by challenging designs that impact yield and approving detailed part specifications. * Collaborate with colleagues to improve processes, enhance productivity, and contribute to the selection, installation and commissioning of new CNC machinery and tooling. * Follow all Health & Safety and Quality requirements, inspection routines and company procedures, taking responsibility for your own safety and that of others. THE CANDIDATE: The ideal CNC Programmer: * Strong knowledge of Fanuc, Heidenhain and Siemens CNC controls and programming languages. * Experience using Creo and CAD/CAM systems, with additional 2D CAD drafting capability. * Good communication and organisational skills, with the ability to work effectively across teams. * Awareness of safety‑critical environments and adherence to quality standards. * Rail industry experience is beneficial but not essential. * Familiarity with Cimco DNC systems. BENEFITS: * Competitive salary + company bonus * Tailored training and development, including company‑funded external qualifications where relevant * Generous pension scheme with 7% employer contribution * Life assurance at 3.5× your salary * Employee Assistance Programme for confidential wellbeing support * Discounted gym membership - up to 25% off at 4,000+ UK gyms * Fuel card savings of 2-3p per litre at 3,500 stations, including BP, Esso and Shell * Employee recognition schemes celebrating great work * 33 days' holiday per year (inclusive of bank/public holidays) ABOUT PROGRESS RAIL: Progress Rail, a Caterpillar company, is one of the largest integrated and diversified providers of rolling stock and infrastructure solutions and technologies for the global rail industry. The company provides advanced EMD® locomotives, engines, and technologies, railcars, trackwork, fasteners, signalling, rail welding and Kershaw Maintenance-of-Way equipment, along with dedicated locomotive and freight car repair services, aftermarket parts support and recycling operations. Progress Rail's deep industry expertise ensures a commitment to quality through innovative solutions. With a global network across the United States, Canada, Mexico, Brazil, Germany, Italy, Australia, China, Germany, India, South Africa, the United Arab Emirates and the United Kingdom, we are committed to serving our customers. PROGRESS RAIL VALUES: * Integrity - the power of honesty * Excellence - the power of quality * Teamwork - the power of working together * Commitment - the power of responsibility * Sustainability - the power of endurance EQUAL OPPORTUNITIES: Progress Rail is an equal opportunity employer. All qualified applicants will receive consideration for employment. We value and embrace diversity of thought, background and unique experiences and we pride ourselves on being an inclusive workforce and culture. HOW TO APPLY: To be considered for this role, please click on the link provided. If you would like any further information about this vacancy before applying, please feel free to contact Taher Rahman at our Sandiacre site. We would politely request no agencies please

The basics: Job Title: TIG Welder Role: Permanent Environment: Precision Engineering Location: Derby Pay: £18 to £20.00 per hour DOE + OT = £42,000 and upwards achievable Shift: Monday-Thursday (7.30am - 4.00pm) and Fridays (7.30am - 12.30pm) Contracted hours per week: 39hrs Holidays/Benefits: 25 days + 8 bank holidays, Pension 5%, Annual Pay increase each year Overview: We are now looking for an additional TIG Welder to join the team. You will be working in clean, modern, purpose-built manufacturing facilities for a company that produce precision engineered components for sectors such as Aerospace, Oil and Gas. The ideal candidate / TIG Welder may have some of the following, however, please note these are only desirable and not essential as all applications will be looked at individually: Previous TIG welding experience with aluminium is essential - thin gauge welding Comfortable working with 1mm to 4mm metal sheetCommutable from: Derby, Burton, Nottingham, Belper, Long Eaton, Loughborough and surrounding areas. If you are interested in the TIG Welder worker role, please apply immediately due to the urgency of this role. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Fabricator / Welder Nottingham £14.00 - £23.00ph Immediate Start Day & Night Shift Available! We are seeking multiple Fabricator Welders to join our well established manufacturing client in Nottingham. You'll be instrumental in the fabrication and welding of bespoke metal components, contributing to high-quality engineering projects across a range of sectors. Key Responsibilities: • Fabricate metal structures and components from scratch, • Using MIG welding techniques on gauges up to 100mm, • Read and interpret complex engineering drawings and technical specifications, • Operate fabrication equipment such as guillotines, press brakes, rollers, and grinders, • Measure, cut, and assemble steel and other metals to exact tolerances, • Inspect finished products for quality assurance and compliance with specifications Qualifications & Experience: • Proven experience in fabricating and welding within an engineering or manufacturing environment, • Welding certificates or equivalent qualifications preferred, • Ability to read and interpret technical drawings, • Skilled in MIG welding; additional welding methods a bonus Package Offered: • Day Shift • Up to £18.00ph depending on experience, • 07: 00 - 16.00 Monday - Friday • Night Shift • Up to £23.00ph depending on experience, • 18:00 - 04:30 Monday - Thursday • Long term stable work, • Immediate start, • Ample of overtime available paid at a premium! Apply: Click apply now for more information and a member of the team will call you back with more information! Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Fabricator Welder Location: Nottinghamshire Salary: £16-£19 per hour Job Type: Full-time, Permanent (Days) At Metalis we are working with a specialist engineering company that is looking to recruit an experienced Fabricator Welder to join their growing team. This role involves fabricating and assembling components to a high standard within a precision engineering environment. Key Responsibilities Fabricate and weld components in accordance with engineering drawings and specifications. Assemble and fit fabricated parts with accuracy and attention to detail. Carry out proof load testing where required. Manufacture components using technical drawings, written instructions, or sketches. Ensure all work meets high-quality standards and is completed within agreed timescales. Adhere to all health, safety, and environmental procedures. Occasional site work Requirements Proven experience fabricating and welding from technical drawings. Experience carrying out proof load testing. Ability to manufacture components from instructions or sketches. Forklift licence (desirable). Experience operating cranes or lifting equipment (desirable).What's on offer: Full-time, permanent role Hours of working Monday to Thursday 7am-4pm and Friday 7am-12pm Free parking Salary £16-19ph + (DOE) Opportunity to work within a specialist precision engineering environment. Training and development opportunities. Supportive, team-focused culture. Overtime opportunities available

Job Title: Multiskilled Engineer Salary: £40,000 - £50,000 Benefits: Extensive benefits package, including the top package Health Care Location: Nottingham Type: Permanent || Full Time Shifts: Monday to Friday 10:00 am to 19:00 pm || with potential for rotational shifts and some paid or TOIL weekend overtime. Overview: The Flavour Network is looking for a multiskilled engineer to join our client, a fast-growing, forward-thinking food manufacturer based in Nottingham. As the multiskilled engineer, you’ll play a hands-on role in developing mechanical and automation solutions, such as using sensors, solenoids, and linear actuators to creatively ensure the product is spread evenly during production. This multiskilled engineer role is ideal for someone who enjoys solving practical problems, applying innovative thinking to real-world manufacturing processes, and fine-tuning equipment to meet the unique needs of their food production environment. Responsibilities for the Multiskilled Engineer: * Carry out planned preventative maintenance (PPM) and respond to unplanned breakdowns * Diagnose and repair mechanical and electrical faults across varied production equipment * Work on conveyors, packaging machines, weighers, chillers, mixers and more * Support the installation and commissioning of new machinery and production lines * Maintain accurate maintenance and service records * Contribute to continuous improvement and reliability projects * Ensure full compliance with H&S and food hygiene standards * Collaborate with Production, Technical, and QA teams to support day-to-day operations * Mentor apprentices or junior engineers as needed * Lead or support process and machinery improvement projects Requirements for the Multiskilled Engineer: * Proven experience in a similar engineering role within a food manufacturing environment is preferred. * Competence in both mechanical and electrical disciplines (roughly 60/40 or 50/50 split) * Confident working with PLC-controlled and automated systems * Skilled in fault-finding and quick diagnostics under pressure * Strong understanding of food safety, hygiene, and health & safety protocols * Experience with sensor logic, VFDs, and control systems is desirable * Ability to carry out minor fabrication and machine modifications (e.g. drilling, grinding, welding) * A proactive, solutions-focused mindset with great communication skills * Eagerness to continuously improve processes and machine performance

WELDERS WANTED - MULTIPLE ROLES ACROSS DERBYSHIRE & NOTTINGHAMSHIRE Location: Derbyshire & Nottinghamshire (Nottingham, Derby, Mansfield, Alfreton, Ilkeston & surrounding areas) Salary: £13 - £19 per hour (depending on experience & shift patterns) Job Type: Full-time, Permanent & Contract Opportunities Shift Patterns: Days, Nights, and Rotating Shifts Available GI Pro is proud to be working in partnership with a number of respected and growing engineering and manufacturing businesses across Nottinghamshire & Derbyshire. Due to continued growth and high demand, we are now recruiting skilled Welders for several long-term opportunities with immediate starts available. We are looking for candidates with experience in: • MIG Welding, • TIG Welding, • Fabrication, • Working from technical drawings, • Welding on mild steel, stainless steel or aluminium, • Structural and/or bespoke work What's on offer? • Competitive hourly rates with regular overtime, • Stable, ongoing work with potential for permanent contracts, • Opportunities across a range of industries - including structural steel, bespoke fabrication, and heavy engineering, • Supportive employers with excellent facilities, • Weekly pay through GI Pro available Requirements: • Proven experience as a welder in an engineering or manufacturing environment, • Ability to read and interpret technical drawings, • Own PPE and basic hand tools (desirable but not essential), • NVQ or City & Guilds in Welding/Fabrication (advantageous) Whether you're looking for a fresh start, your next challenge, or a change of environment - we'd like to hear from you. Click apply now for more information and call back from the team. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Join Eagle (G.E.T.) Fabrications as a Mobile Welder/Fabricator Team Leader, earning £18.50–£20.50 per hour with overtime, travel, hotels paid, and UK-wide site work. Welder/Fabricator Team Leader Bulwell, Nottinghamshire (UK-wide travel – mainly South/London sites) Full time, Monday – Friday (working away weekly) Permanent position with overtime opportunities (after 40 hours) £18.50 - £20.50 per hour Please Note: Applicants must be authorised to work in the UK Eagle (G.E.T.) Fabrications Limited are a family-run company that are in Bulwell, Nottinghamshire, only a short distance away from Junction 26 of the M1 in the East Midlands. Since Eagle (G.E.T.) Fabrications formed in October 2010, we have grown considerably in the marketplace in which we operate, rapidly becoming one of the leading manufacturers of bespoke steel fabrications catering for the quarrying, mining, recycling, and waste management sectors. Bespoke by nature, every day is different, so you'll remain interested, challenged, and engaged in the job. Due to our current workload and significant future order pipeline, we need quality people to join our already highly skilled team. We are looking for an experienced Mobile Welder/Fabricator or Plant fitter to join our growing team of Site Engineers to assist with planned, reactive, and emergency maintenance on various clients' premises across the UK. We currently have a Head Office based in Nottingham, but carry out work in all areas of the UK, with most Teams working weekly in the South/London areas. The Role This mobile role requires you to work away Monday – Friday every week, on-site at various clients' premises. Your role will be to undertake planned, reactive maintenance and emergency running repairs to fixed and mobile plant across various Recycling, Material Processing and Quarrying Plants. In this mobile role, you will be a Team Leader, working either in pairs or a group of teams, alongside other Welders/Fabricators and Engineers. Carrying out Installation, Maintenance, General Welding and Fabrication tasks on a variety of fixed plant machinery and equipment on a range of sites across the UK. In your role as Team Leader, you will be expected to run the work on-site, finding the best solutions to problems, and leading your team to solve and overcome these most efficiently and effectively. Part of your daily tasks will include creating reports at the end of the day, utilising a custom app and a provided tablet/4G dongle, and carrying out on-site Risk Assessment and Method Statements when required. The Successful Candidate: Must be able to work away 5 days a week. Applicants should not apply if this is not the case. (Typically, you will not return home during this period and will be put up in a hotel near the working location). Travel to a variety of sites across the UK, mainly Southern/London-based. Experienced MIG and Stick Welder, with a welding background essential. (4-5 years' experience desirable) GAS cutting/burning required. Fabrication or Steelworker background essential. (2-3 years' experience desirable). Forward thinking individual. Ability to take on responsibilities. Able to solve problems when presented with them. Ambitions to learn new skills and progress within the company. Mature attitude to work ethics and values which align with those of the company. Experience and knowledge of working with hand tools. Be in good health, physically fit and able to carry heavy loads. Have good communication, organisation and teamwork skills Have a good understanding of health and safety Be able to work flexibly and meet deadlines Have a full UK Driving Licence Be looking to develop a long-term career with Eagle (G.E.T.) Fabrications Limited Benefits: 28 days holiday Additional Christmas Closure - average of 3-4 days additional paid leave over the Christmas period Bereavement leave Company pension scheme Bonus scheme and performance-related bonuses Company events to foster team spirit Employee mentoring programme for development and progression Flexible time off for appointments Free on-site parking How to apply for the role: If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Recycling, Construction, Civil, Quarrying, Mining, Quarry, Welder, Fabricating, Welding, Fitter, Fleet, Engineering, Mechanical, Workshop, Plant, Heavy, Maintenance, Field, Service TPBN1_UKTJ

Maintenance Engineer (Mechanical bias) Arnold Nottinghamshire Monday to Friday Days (shift covered is required) £47k OTE up to £55,000 with shift cover and overtime (paid at 1.5x and 2x) + generous 10% pension, plus other site-specific benefits. The Opportunity We are working with a prestige client with c40 sites across the UK and over 2000 employees. They are one of the country’s leading manufacturers supplying into the construction and building trade and are renowned for their quality products. We are currently recruiting for a Maintenance Engineer with a mechanical bias to join their large, high-performing facility working with state-of-the-art machinery alongside experienced Engineers. This is brand new position with the aim that this days specific Maintenance Engineer will help move the site from more reactive, to planned maintenance focus by taking the pressure off the shift Maintenance Engineers and completing interesting improvement and planned maintenance work. The Role As a Maintenance Engineer, you’ll work with a range of heavy-duty automated machinery including: Large mixers and slicers Conveyors, silos, and hoppers Kilns, hydraulics, and pneumatics systems Using a tablet system for job tracking, this role places a strong emphasis on mechanical maintenance and repair. You’ll also be working with hydraulics, pneumatics, gearboxes, bearings, shafts, and chains. While this role will eventually be significantly focussed on planned maintenance, as this is a new position, there will be a transitional period and particularly to start, this position will involve substantial reactive maintenance in line with business requirements. The Candidate The successful Maintenance Engineer will need: A background in mechanical maintenance within industrial or manufacturing environments Experience working on mechanical equipment Welding or fabrication experience would be highly advantageous A good attitude with a willingness to learn and to be a team player An NVQ Level 3, City & Guilds, or equivalent qualification in engineering A proactive attitude and flexibility for overtime as shift cover will be an integral part of the role This is an ideal role for a Maintenance Engineer who wants to develop their career in a stable, well-backed facility with real progression and training opportunities. Why apply? Joining our client, you will be joining a business that place emphasis on training, development and progression of their engineers. The site in Nottinghamshire is one of their most established and an important cog in the company wheel, it’s a large profit contributor providing extreme job security. You will be joining a company that look after their engineer’s future, with an industry leading pension of 10% contribution. If you think you are the right maintenance engineer for this market leader, please press apply, call Kristi on (phone number removed), or email your CV too ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Field Engineer - Welding Inspector.

Fabrication & Welding professional. Fabrication & Welding department.

Location: Site based office attendance minimum 3 days per week AND 2 days remote working.Status: Contract - INSIDE IR35.Duration: Approved until 31dec26 (renewable).Reports to: Transverse Discipline Lead within the Integrated Transverse Team.Morson Edge are working on behalf of a major player within

We currently require the services of a Welding Engineer to work for a well respected client based in Somerset. Degree or equivalent experience in a welding engineering discipline. Experience / understanding of welding engineering and NDT in nuclear or high hazard industries.

Job Title: Operations Leader (Steelwork/Welding/Caulking) Location: Barrow-in-Furness (On-site) Salary: £47,271+ depending on skills and experience What youll be doing : Establishing a Network amongst the Engineering & Build Functions Review, influence, challenge and endorse the SSNA Build Strate

Production Controller Welding / FabricationAn established engineering and specialist manufacturing business based in Glasgow is seeking an experienced Production Controller to join their growing operations team. The company delivers complex fabrication, welding and engineering services to clients a

Theyre now looking for an experienced Fabrication & Welding prof.

Welding InstructorDepartment: WEC Group Training Academy (MTL Rotherham) Salary:£36,000 basic (Neg DOE) Hours of work:37.

Milton Keynes** £40,000 £50,000 per annum (depending on experience) An exciting opportunity has arisen to join a leading international engineering business as a Service Engineer specialising in welding equipment. Based in Milton Keynes, you will be responsible for the installation, servicing,

An established engineering and manufacturing business based in Dewsbury is seeking an experienced Welding Coordinator to join their team at their Dewsbury site. Friday!Salary and Benefits of the Welding Coordinator:Salary: £50,000 - £55,000 per annum (dependent on experience)Benefits:1:30pm Finish

Recruit4staff are representing a well-established engineering and fabrication business in their search for a Welding Supervisor to work in FlintJob Details: Pay: £45,000 per annum (Bonus scheme)Hours of Work: 40 hours per week (08:00 – 16:30)Duration: PermanentBenefits: 30 days holiday (inclusive

The Company Our client is a specialist Engineering company due to growth they now require a Welding Inspector.

We are seeking an Assessor Trainer In Welding & Fabrication to join our team.