Trabajos assembly manufacturing en Oceanside, New YorkCrear alertas

Job DescriptionJob Title: Mechanical Technician Are you a hard-working individual, looking for the opportunity to carve out a successful career in an organization where the spirit of family, ethics, good business practice and hard work share equal billing? If so, our ANDI group of companies may be a good place for you to find your niche! We are committed to rewarding skill, perseverance and a positive attitude with opportunities for growth. We are a multi-faceted enterprise involved in Sales, Service, Training, Certification, Equipment Fabrication, Equipment Installation, Maintenance and Repairs. The focus industry is Hyperbaric Chambers and Support Equipment. Intrigued? Read on to learn more! Required Skill Set : Aptitude for mechanical assembly and repairs. Small motors, compressors, oxygen concentrators and refrigerated dryers are among our products. Training is provided but the basic skill set is mandatory. Position Responsibilities: The Mechanical Technician is responsible for assembling and servicing various small machinery such as compressors & oxygen concentrators including assembling gas manifolds and other pneumatic plumbing assemblies as trained and directed. • Ensures accuracy of information in the system and compliance with internal controls., • Confirms adequate inventory for the production schedule., • Capable of providing technical support on the equipment systems that have been mastered. Qualifications& Knowledge Conduct: Highly motivated, positive and enthusiastic * Clean and Neat in appearance * Good interpersonal skills, and good listener and communicator * Process oriented * Eagerness to learn * Be a team player and always support the Company's goals * Being punctual and reliable is a must. * No smoking

Job Description CBIZ Talent Solutions is partnering with our manufacturing client in central Nassau County, NY, to identify a hands-on assembly Supervisor to join their team. The supervisor will be responsible for building and wiring rubidium-based electronic assemblies while leading a small team on the production floor, setting daily priorities and ensuring quality workmanship to J-STD standards. Key responsibilities • Assemble, solder, and wire electronic assemblies (surface-mount, fine-pitch, through-hole, chassis wiring) under a microscope using standard manufacturing tools., • Supervise Assembly personnel; set daily priorities, assign work, and balance resources to meet schedule and quality goals., • Monitor productivity and workmanship; provide floor-based coaching, guidance, and training., • Review and interpret assembly drawings, wiring lists, and written instructions; clarify requirements and resolve work-related issues., • Handle administrative tasks: timesheets, progress reviews, and corrective counseling., • 5–10 years production experience in soldering/assembly of SMT (including fine pitch), through-hole, and chassis wiring under a microscope., • Proficient reading/interpretation of assembly drawings, wiring lists, and work instructions; strong communication skills., • Proven “front-line” leadership experience working directly with individual contributors., • Ability to earn trust, maintain professional relationships, and strengthen an inclusive culture., • Salary range: $62,500–$73,000, based on experience. For immediate consideration please send your most current resume to or with "Super/Solder" in the subject line. Only qualified candidates will be considered. CBIZ Talent & Compensation Solutions is an Equal Opportunity Employer. CBIZ Talent & Compensation Solutions does not discriminate on the basis of race, ancestry, national origin, color, religion, sex, gender identity, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Job Description Assembler 1st Shift Westbury, NY Essential Functions: Follows assigned manufacturing procedures to perform product assembly Reports non-conformances in products to Management Ensures the assigned bench is clean and organized May perform other tasks as required by the Company Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Must be dependable and responsible. Good Attendance is a MUST. Good hand dexterity and eye-hand coordination. Mechanical abilities are a strong plus for this position. Attention to details The Company will provide necessary training and certifications as required for the position upon hire. Work Environment This job takes place in a Manufacturing environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must be able to lift up to 50 pounds. Minimum weight of products is 5 pounds. Position Type/Expected Hours of Work Some flexibility in hours is allowed, but the employee must be available during the core work hours of 7:00 AM. To 3:30 PM and must work 40 hours each week to maintain full-time status. Occasional evening and weekend work may be required as job duties demand. Required Education and Experience: H.S. Diploma or GED. Prior experience as a mechanical assembler is a strong plus or other job that requires mechanical abilities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Hi- Rel Solder Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. \n • Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards.\n, • Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610.\n, • The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools.\n • High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment., • Proficiency in soldering to IPC J-STD- A-610 Class 3 standards., • Certification in IPC J-ATD-001 and/or IPC-A-610., • Experience in working under a microscope and magnification and with fine-pitch components., • Familiarity with ESD protection procedures., • Ability to read and understand technical documents and drawings., • Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. We offer a comprehensive benefit package including: Health Insurance, Dental Insurance, Vision, Life Insurance, Short Term Disability, Long Term Disability, Flexible Spending Option and 401K. We also offer Paid Time Off including: Vacation, Sick and Paid Holidays.

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Overview The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 A Day In The Life Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: \n • Assists in planning and designing processes for an electronics manufacturing facility .\n, • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment.\n, • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department\n, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications.\n, • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality.\n, • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement.\n, • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production.\n, • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed.\n\n What will help you thrive in this role? \n • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area.\n, • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed\n, • Lean Six Sigma/5s Tools a Plus.\n, • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended.\n Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Position Summary: Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: • None Duties and Responsibilities: • Assembly of cores for heat exchangers, • Operate equipment and tools to stretch, compress, size and cut FIN material, • Conduct general deburring of parts to meet quality standards, • Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: • Demonstrate mechanical aptitude, • Must be able to read and interpret engineering blueprints., • Strong adherence to safety protocols and operational directions communicated in English, • Ability to work overtime based on the business needs which may include weekends. Education and Experience: • High School diploma, Trade School Diploma, or GED required, • Manufacturing/Production background preferred, not required., • Ability to read, write, and converse in English. Physical Requirements: • Ability to lift up to 50 lbs. with or without accommodations., • Ability to walk, stand, stoop, and bend 80% of the time during a shift, • Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

\n • J-STD-001 Certified, wiring/soldering (S-level a plus)\n, • 5-10 years experience soldering/assembly of surface mount components (including fine pitch), through-hole components and chassis wiring under a microscope in production environment with knowledge of standard manufacturing tools.\n, • Ability to read and interpret assembly drawings, written instructions, wiring lists and discuss work related issues.\n, • Experience as a "front line" leader, working directly with individual contributors in various roles.\n, • Hands-on assembly supervisor working on floor assembling/wiring electronic assemblies as well as supervise personnel within the Assembly group.\n, • Setting daily assembly priorities, direct and assign personnel as appropriate to meet those priorities.\n, • Monitor employee productivity, providing guidance and training when needed.\n, • Administrative responsibilities for production personnel including timesheets, progress review, and corrective counseling.\n, • Actively participate in the hiring and selection process to fill open positions\n, • EOE/Disability/Veteran\n, • This position is onsite\n, • We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including 11 Paid Holidays.\n

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Bench Technicians/Electronic Assemblers. The suitable candidate should have some experience with mechanical, electrical assemblies, some soldering experience and should be familiar with basic test equipment. This position focuses on assembling electronic equipment such soldering wires onto switches and integrating the switches into metal housings as well as packaging the finished product. You will also be integrating circuit boards into enclosures, wiring them and final testing the equipment once completed the data must be entered into a data base so basic computer skills are required. Essential Requirements: • Strong work ethic, • Minimal soldering experience, • Basic knowledge of hand tools, • Mechanically inclined, • Follow assembly & test procedures, • Maintain a safe and organized work area, • Must be able to read a wiring diagram, • Document and submit all failures of equipment to engineering QA Department, • Maintain quality control on the production of all equipment assembled, • Ensure all company equipment and tools are in proper working condition, • Maintain manufacturing records of all products Education / Experience Requirements: Qualified candidates must have some education in digital electronics and can be entry level but 1+ year of electronics assembly work is preferred as well as basic soldering skills and the knowledge of electronic test equipment such as DVM's is required. Experience with Microsoft Office and Outlook is a plus. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Director, Manufacturing Engineering – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department., • Provide oversight for manufacturing activities in the Reynosa Mexico facility., • Minimal travel expected. Potential travel to facility in Reynosa, Mexico in support of overall business objectives. UALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Manufacturing Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $85,000 to $105,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking a Estimator who will work directly with all department Staff, Supervisors & Managers to setup, reconcile and report on the progress and material/labor costs on all products, jobs and projects. The ideal candidate will have strong organizational, Microsoft Office and CAD drawing review skills, familiar with PC peripherals, basic knowledge of electronics, detail oriented, always willing to ask questions to resolve all concerns and possess an exceptional work ethic. Duties and Tasks: • Identify factors affecting costs, such as product development (NRE's) production time, materials, and labor., • Ability to analyze drawings and other documentation to prepare time, cost, materials, and labor estimates., • Calculate, analyze, and adjust estimates., • Recommend ways to reduce costs without sacrificing quality., • Work with sales teams to review RFP's and new product requests and prepare estimates and bids for clients., • Maintain records of estimated and actual costs., • Provide cost management support and insight for Manufacturing and Product Assembly BOM activities., • Prepare required reports on ongoing jobs/projects, summarizing job/project to-date material and labor costs over/underestimated figures and verify latest BOM costs and report on BOM changes., • Participate in all BOM related support for Design, Engineering, Production and Sales Departments., • Recognize, identify, and correct data errors and process errors, ensure errors are corrected, identified, and reported., • Establish List, Reseller and Distribution channel pricing per predefined markups and discounts., • Work on fixed deadlines, plan work in advance and work efficiently and accurately., • Ownership of the Product Inventory System and content, product/hierarchy numbering, dims, weight, pictures, production drawings and descriptions., • Other duties as deemed essential for the position. Skills/Experience/ Education: • Bachelor's degree or higher., • Reads manufacturing drawings (CAD/CAM) and technical documents to prepare estimates., • Advanced proficiency in Excel., • Familiarity with metal fabrication, • Basic knowledge of electrical components or technical background., • Vendor Management experience, • Experienced with tracking and managing BOM costing revisions., • Experience in Supply Chain Cost Analysis., • Understanding of planning, sourcing, and procurement., • Attention to detail and effective time management skills., • Self-motivated, ability to initiate and follow tasks through to completion and can work independently., • Ability to work in a fast paced, cross functional environment while maintaining composure, focus and a positive attitude., • Proficient and transparent communication skills (verbal, written, listening)., • Good Computer skills (Microsoft Office) 40 WPM typing., • Strong math and excel skills., • Must be able to Multi-task., • Exceptional interpersonal skills., • Strong organizational skills., • Knowledge of Fishbowl is a plus., • Ability to collaborate with cross-functional teams in a rapidly shifting work environment, to deliver value-added results. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to , or fax resume to 516-253-0209. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description We’re hiring a hands-on industrial machine builder to assemble and build bag-making / film converting machinery from mechanical engineering drawings, BOMs, and specifications. This is a shop-floor build role involving precision mechanical assembly, alignment, troubleshooting during build, and supporting machine test/run-off. Important: This position is for candidates who have built or assembled industrial machinery / OEM equipment. Candidates with only automotive repair backgrounds (engines, brakes, general vehicle service) will not be considered unless they also have direct industrial machine build experience. What You’ll Do (Key Responsibilities) • Build complete OEM converting/bag machines and subassemblies from prints, exploded views, and BOMs., • Read and interpret mechanical engineering drawings (dimensions, tolerances, fits, fastener callouts, assembly notes)., • Perform precision installation and alignment of mechanical components, including: shafts, bearings, rollers/web-handling assemblies chain/belt drives, gearboxes, couplings, pneumatic components (FRLs, valves, cylinders), basic hydraulics if applicable, motors and mechanical power transmission components., • Use measurement and inspection tools to achieve proper fit and alignment (calipers, micrometers, indicators, feeler gauges, straight edges, torque tools, etc.)., • Troubleshoot mechanical issues during build and test: binding/misalignment, vibration, tracking issues, inconsistent motion, air leaks, premature wear, etc., • Partner with engineering and production to: clarify prints, flag part/drawing discrepancies, suggest build improvements (access, serviceability, repeatability)., • Complete build documentation: assembly checklists, punch lists, redlines/feedback to engineering and quality notes. To be considered, you must have: • 3+ years of hands-on experience building/assembling industrial machinery (OEM machine builder, industrial machine assembler, millwright, packaging machinery assembler, converting equipment tech, similar)., • Demonstrated ability to read and build from mechanical engineering drawings and parts lists (not just “looking at pictures”)., • Strong working knowledge of: bearings, shafts, pulleys/sprockets, chain drives, gear assemblies, fasteners, torque practices, alignment methods, precision fit-up, pneumatics (cylinders/valves/regulators, tubing, leak checks)., • Comfort using common hand/power tools and precision measuring tools., • Experience with bag-making, film converting, flexible packaging, or web-handling machinery., • Ability to read pneumatic schematics and build circuits cleanly., • Experience participating in machine testing, debug, run-off, or FAT support., • Shop-floor manufacturing environment (standing, bending, lifting, use of hand/power tools)., • Must be able to lift up to 50 lbs (with assistance/mechanical support for heavier assemblies as required)., • Competitive hourly wage (based on experience), • Paid vacation and sick time, • Health and dental insurance, • 401K Plan Please submit a resume that includes: • Industrial machinery you have built/assembled (types of machines, your role, years of experience), • Evidence of your experience reading prints (assemblies, tolerances, BOMs) Pay: $23.00 - $27.00 per hour Expected hours: 40 per week Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off

An established and leading Precision Timing & Frequency Technology Firm are looking for a Hi-Rel PC Assembler/Solder The Hi-Rel Assembler/Solder will join their manufacturing team. The right candidate will have 2-3 year's experience. Responsibilities: • Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards., • Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610., • The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools., • Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills • High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment., • Proficiency in soldering to IPC J-STD- A-610 Class 3 standards., • Certification in IPC J-ATD-001 and/or IPC-A-610., • Experience in working under a microscope and magnification and with fine-pitch components., • Familiarity with ESD protection procedures., • Ability to read and understand technical documents and drawings., • Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. Salary: Up to 60k base Comprehensive Benefits Package: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

An established and leading Precision Timing & Frequency Technology Firm are looking for a Production Controller The company is seeking a Production Controller to support the manufacturing operations for both space flight hardware and commercial product lines. This position is responsible for controlling the release, movement, and status of shop orders to ensure hardware progresses through manufacturing in accordance with program schedules and delivery requirements. The role requires daily use of Infor VISUAL ERP (9D), Microsoft Project and advanced Excel tools to track WIP, shortages, and production status in a high-mix, low volume environment. Responsibilities: • Control and maintain shop orders and travelers in Infor VISUAL., • Monitor WIP and move orders through manufacturing operations., • Coordinate hardware movement between departments (assembly, test, environmental screening, inspection, shipping., • Track work order status and ensure completion of required operations., • Identify and escalate shortages, bottlenecks, and schedule risks., • Coordinate priorities with Manufacturing, Engineering, Quality, Material Control, and Program Management., • Support environmental test scheduling (TVAC, vibration, burn-in, ESS)., • Ensure required documentation and configuration are correct before hardware moves forward., • Implement Engineering Change Orders into active work orders as directed., • Support both flight hardware and commercial production requirements. Systems & Reporting: • Daily use of Infor Visual 9 AD ERP for order status, transactions, and tracking., • Maintain Project and Excel-based reports for WIP status, shortages, and delivery performance., • Use advanced Excel functions (PivotTables, formulas, data analysis tools). Requirements: • 5+ years experience in production control, manufacturing coordination, or shop floor control., • Aerospace/defense or high-reliability electronics experience preferred., • Strong understanding of WIP control and manufacturing processes., • Advanced Microsoft Excel skills required., • Infor VISUAL ERP experience preferred., • Ability to manage multiple programs and changing priorities. Salary: Up to 65k base (can go higher for the right person) Comprehensive Benefits Package: They offer a comprehensive benefit package including : Health Insurance, Vision and Dental, Life Insurance, Short and Long Term Disability. Flexible spending options and 401K. They also offer a very lucrative paid time off policy as well as 11 paid Holidays.

An established and leading Precision Timing & Frequency Technology Firm are looking for a Hi-Rel PCB assembly supervisor. The Hi-Rel Supervisor oversees teams involved in manufacturing Solders and Assemblers. Qualifications: • 5-10 years experience soldering/assembly of surface mount and through-hole components and wiring chassis under a microscope in production environment with knowledge of standard manufacturing tools., • J-STD-001 Certified, wiring/soldering (S-level a plus) IPC-A-610., • Ability to read and interpret assembly drawings, written instructions, wiring lists and discuss work related issues., • High school diploma or equivalent., • 5-10 years’ experience soldering/assembly of surface mount components experience in PCB or electronics assembly, preferably in a Hi-Rel or relative environment, • Proficiency in soldering to IPC J-STD-001 and IPC-A-610 Class 3 standards. Certification in IPC J-STD-001 and/or IPC-A-610 is strongly preferred, • Working knowledge of assembling electronic products with good dexterity and able to follow work instructions., • Experience working under Microscope and magnification and with fine-pitch components., • Familiarity with ESD protection procedures., • Ability to read and understand technical documents and drawings., • Excellent attention to detail and manual dexterity., • Good communication skills and ability to work both independently and team environment., • Strong computer and written skills is a plus, • Detail-oriented, managing technicians, providing training, and implementing safety and enthusiastic applicants willing to learn a new skill is encouraged to apply., • This role is 100% onsite Salary: 60-80k base (can go higher for the right person) Comprehensive Benefits Package: They offer a comprehensive benefit package including : Health Insurance, Vision and Dental, Life Insurance, Short and Long Term Disability. Flexible spending options and 401K. They also offer a very lucrative paid time off policy as well as 11 paid Holidays.