Assembly manufacturing jobs in Vestal, New YorkCreate job alerts

The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes in order to improve manufacturing safety, quality, and productivity. Key Responsibilities • Develop, document, and improve assembly and test processes for electronic and mechanical products., • Collaborate with design engineering on DFM (Design for Manufacturability) to ensure smooth transition from prototype to production., • Specify, design, and implement jigs, fixtures, and production tooling to improve assembly consistency and ergonomics., • Conduct time studies, process capability analysis, and workflow optimization to improve efficiency and reduce waste., • Lead or support NPI (New Product Introduction) builds and establish process documentation (work instructions, routings, BOM validation)., • Monitor and resolve manufacturing issues, including root cause analysis and corrective actions for quality or yield problems., • PC board development activities including item master generation, PCB drawing creation, SMD stencil drawings, prototype board request management, PCB assembly pack, and change management., • Support implementation of Lean Manufacturing, 5S, and continuous improvement initiatives., • Interface with suppliers for tooling, components, and process support as needed., • Ensure compliance with applicable safety and quality standards. Qualifications • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or related field., • 3–7 years of experience in manufacturing engineering, preferably in electronics or electro-mechanical assembly environments., • Experience introducing new products to production and creating supporting documentation., • Proficiency with MCAD and ECAD tools (SolidWorks / Altium preferred) and ERP/MRP systems., • Strong knowledge of lean manufacturing, process control, and failure analysis techniques., • Hands-on mechanical and electrical aptitude with a passion for precision assembly., • Strong analytical and problem-solving skills., • Excellent communication and teamwork across production, design, and quality teams., • Attention to detail and craftsmanship aligned with McIntosh’s premium brand standards., • Self-motivated and organized, capable of driving projects independently.

At Bose Corporation, we believe sound is the most powerful force on earth - and for over 60 years, we have been a company built on innovation, excellence, and independence. Privately owned, fiercely customer-focused, and driven by our values, we continue to lead industries and transform lives through sound. Today, Bose Corporation is entering an exciting new era. Across multiple global Business Units and Global Functions, we are shaping the future of audio technology, automotive, luxury, and premium experiences. We invite you to join us in this transformation. Job Description Job Title: PCB Hand Assembler Department: Printed Circuit Boards Reports To: PCB Supervisor Location: Binghamton, NY Position Summary: The PCB Hand Assembler is responsible for the accurate assembly of electronic circuit boards according to detailed work instructions, drawings, and bills of materials. This role involves identifying and installing the correct electronic components, applying masking materials where required, and preparing assemblies for wave soldering and subsequent inspection. Attention to detail, manual dexterity, and quality workmanship are essential to ensure boards meet company and customer standards. Key Responsibilities: \n • \nAssembly & Preparation\n, • Read and follow work instructions, assembly drawings, and component placement diagrams to correctly identify and install parts on printed circuit boards (PCBs).\n, • Handle and place through-hole components such as resistors, capacitors, connectors, and other relevant components using hands, hand tools or tweezers.\n, • Apply masking materials or high-temperature tape to designated areas prior to wave soldering to protect components and keep solder-free zones.\n, • Verify component orientation, polarity, and value before insertion or masking.\n, • Trim component leads to specified lengths prior to soldering operations.\n\n\n, • \nQuality & Inspection\n, • Perform visual inspections to ensure correct component placement, alignment, and solder mask coverage.\n, • Identify and report discrepancies, missing components, improperly labeled or mis-picked parts or damaged boards.\n, • Work closely with quality control personnel to address any nonconformities or rework requirements.\n\n\n, • \nDocumentation & Process Control, • Accurately document assembly steps, component traceability, and completed operations on production travelers or electronic records.\n\n\n Qualifications: \n • High school diploma or equivalent required.\n, • Minimum 1-3 years of experience in electronic assembly or related manufacturing environment preferred.\n, • Ability to read and follow work instructions, schematics, and component identifiers.\n, • Knowledge of electronic components and familiarity with PCB layouts.\n, • Strong manual dexterity, attention to detail, and hand-eye coordination.\n, • Experience working in an ESD-controlled environment a plus.\n, • IPC-A-610 certification preferred but not required (company-provided training available).\n\n Working Conditions: Work is performed in an electronics assembly area with exposure to small components, flux fumes, and soldering equipment. You must wear appropriate ESD & PPE protection (as documented in our safety manual). Work may involve sitting for extended periods and using magnification tools for inspection. At Bose, you're inspired to be and do your best and are rewarded for your unique talents! Our compensation is thoughtfully tailored to your skills, experience, education, and location, and goes beyond base salary. The hiring range for this position in the primary work location of Binghamton, New York is: $16.00-$19.92 per hour.The hiring range for other Bose work locations may vary.In addition to competitive base pay we offer rewards including bonus programs, comprehensive health and welfare benefits, a 401(k) plan, plus exclusive perks designed to support your wellbeing, and a generous employee discount where you can immerse yourself in our products and experiences. We are a proudly independent company-driven by purpose, guided by our values, and united by a belief in the power of sound. As the world leader in audio experiences, we're creating what's next-pushing boundaries and delivering transformative sound experiences for people everywhere. Join us and make your next career move a mic-drop. Let's Make Waves. Bose is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status, or any other legally protected characteristics. The EEOC's "Know Your Rights: Workplace discrimination is illegal" Poster is available here: . Bose is committed to providing reasonable accommodations to individuals with disabilities. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to [email protected]. Please include "Application Accommodation Request" in the subject of the email. Our goal is to create an atmosphere where every candidate feels supported and empowered in the interviewing process. Diversity and inclusion are integral to our success, and we believe that providing reasonable accommodation is not only a legal obligation but also a fundamental aspect of our commitment to being an employer of choice. We recognize that individuals may have different needs and requirements based on their abilities, and we provide reasonable accommodations to ensure ideal conditions are met during the application process.

At Bose Corporation, we believe sound is the most powerful force on earth - and for over 60 years, we have been a company built on innovation, excellence, and independence. Privately owned, fiercely customer-focused, and driven by our values, we continue to lead industries and transform lives through sound. Today, Bose Corporation is entering an exciting new era. Across multiple global Business Units and Global Functions, we are shaping the future of audio technology, automotive, luxury, and premium experiences. We invite you to join us in this transformation. Job Description Job Title: Final Assembly Department: Final Assembly Reports To: Production Assembly Supervisor Location: Binghamton, NY Position Summary: A final assembler is responsible for the assembly of our electronics with parts acquired through our various subassemblies to create a semi-finished product. These components include printed circuit boards, chassis assembly, capacitor assembly, transformers, metal binding posts, cable harnesses, and glass assemblies. Assembly is done with a combination of hand and power tools. Key Responsibilities: \n • \nElectronics Assembly\n, • Following work instructions, and training from area team leaders and experienced builders to complete a product.\n, • Maintain proper tool condition to ensure ease of build and quality of work.\n, • Adhere to and maintain a pace conducive to schedule completion of units as determined by supply planning and production control.\n, • Provide feedback on accurate part counts, correctness, and issues that may be attributed to engineering design of the unit.\n\n\n, • \nQuality & Inspection\n, • Inspect subassemblies, including but not limited to chassis, glass panels, printed circuit boards to ensure correctness prior to build\n, • Maintain inspection records and report any deviations, defects, or nonconformities.\n, • Perform visual inspection of cable insertion, cosmetics, and proper usage of hardware throughout the building process.\n\n\n, • \nMaintenance & Safety\n, • Daily inspection of tools and work area to ensure safety and proper working conditions associated with electronics assembly.\n, • Report on maintenance issues promptly minimize downtime.\n, • Follow all company safety procedures and maintain a clean, organized work area.\n\n\n\n Qualifications: \n • High school diploma or equivalent required.\n, • Minimum understanding of hand and power tools.\n, • Knowledge of process flow and schedule adherence (preferred)\n, • Ability to work in a fast-paced team-oriented environment\n, • Proficient with precision measuring tools and inspection techniques.\n, • Manufacturing assembly experience (1 year preferred)\n, • Must be able to lift 50 lbs. and stand for extended periods.\n\n Working Conditions: Work is performed in a manufacturing environment with exposure to noise, sharp metal edges, and moving machinery. Appropriate PPE (as outlined in our safety manual) must be always worn. At Bose, you're inspired to be and do your best and are rewarded for your unique talents! Our compensation is thoughtfully tailored to your skills, experience, education, and location, and goes beyond base salary. The hiring range for this position in the primary work location of Binghamton, New York is: $16.00-$19.92 per hour.The hiring range for other Bose work locations may vary.In addition to competitive base pay we offer rewards including bonus programs, comprehensive health and welfare benefits, a 401(k) plan, plus exclusive perks designed to support your wellbeing, and a generous employee discount where you can immerse yourself in our products and experiences. We are a proudly independent company-driven by purpose, guided by our values, and united by a belief in the power of sound. As the world leader in audio experiences, we're creating what's next-pushing boundaries and delivering transformative sound experiences for people everywhere. Join us and make your next career move a mic-drop. Let's Make Waves. Bose is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status, or any other legally protected characteristics. The EEOC's "Know Your Rights: Workplace discrimination is illegal" Poster is available here: . Bose is committed to providing reasonable accommodations to individuals with disabilities. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to [email protected]. Please include "Application Accommodation Request" in the subject of the email. Our goal is to create an atmosphere where every candidate feels supported and empowered in the interviewing process. Diversity and inclusion are integral to our success, and we believe that providing reasonable accommodation is not only a legal obligation but also a fundamental aspect of our commitment to being an employer of choice. We recognize that individuals may have different needs and requirements based on their abilities, and we provide reasonable accommodations to ensure ideal conditions are met during the application process.

Job Description Job Title: Assembler Shift: 7:00 AM to 3:30 PM Electronic Assembler will perform upper level hand assembly and have experience doing through-hole, surface mount and jumper wire soldering as well as IPC-610 Inspection/touch-up. • Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities., • Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly., • Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain., • Ability to perform duties of the conformal coat processes., • Ability to perform duties in module cleaning, potting and testing., • Ability to learn the use of bench top equipment, test equipment, hands tools and computers., • Ability to assemble small mechanical products – springs, gears, mechanical subassemblies., • Ability to assembly and test electro and electro-mechanical products., • Participate in meetings to determine work priorities., • Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required., • Adherence to company policies such as safety, respect for others, integrity and workplace rules., • Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development., • High School Diploma or GED., • Two (2) Years prior experience in Production and/or Manufacturing. Experience in the Manufacturing of Aircraft Instruments or Electronics desired., • Develops and encourages original, creative and successful approaches to issues; continually improves processes; takes smart risks., • Motivated individual, fast learner, and capable of working independently, • Must have aptitude and the physical abilities to learn to work on very small mechanical assemblies. Assembly and inspection under a microscope is required., • Soldering skills are desired and ability to become solder certified is required., • Must have knowledge of prototype, assembly drawings and blueprint reading., • Must be able to support assemblies of a complex and critical nature that may require an extensive knowledge of techniques, tools, materials, military standards and ISO 9000.

FUNCTION: Assemble Printed Circuit Board/Electronic Box Build for aerospace products under the leadership of the Manager of Operations. DUTIES & RESPONSIBILITIES: • Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities., • Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly., • Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain., • Ability to perform duties of the conformal coat processes., • Ability to perform duties in module cleaning, potting and testing., • Ability to learn the use of bench top equipment, test equipment, hands tools and computers., • Ability to assemble small mechanical products - springs, gears, mechanical subassemblies., • Ability to assembly and test electro and electro-mechanical products., • Participate in meetings to determine work priorities., • Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required., • Adherence to company policies such as safety, respect for others, integrity and workplace rules., • Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development. EDUCATION/EXPERIENCE: • High School Diploma or GED, • Two (2) years prior experience in Production and/or Manufacturing. Experience in the Manufacturing of Aircraft Instruments or Electronics desired. Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $45,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Binghamton

Job Description Eastern Staffing & Recruiting is recruiting Manufacturing Associates in the Broome County area for a growing manufacturing company! We are hiring for a variety of openings and are seeking candidates with entry-level to advanced manufacturing experience! We have openings on all shifts, that offer room for growth, on-the-job training, benefits, competitive pay, and unlimited overtime. We currently have openings for: Assemblers, Injection Molding Machine Operators, Quality Inspectors, and Solderers. 1st shift: • 6:00 AM- 2:30 PM, • 6:30 AM- 3:00 PM, • 12:00 PM- 8:00 PM, • 11:00 PM-7:30 AM Responsibilities • Set up assigned stations on the line including the assembly of basic equipment and preparing raw materials., • Operate and monitor the output of machinery., • Pull pieces to inspect for quality and document reports for management., • Assemble electrical and mechanical components according to customer specifications., • Interpret engineering drawings, blueprints, and written instructions for work orders to ensure the product meets tolerances and product specifications., • Must possess good hand-eye coordination and identify a variety of colors and shapes, • Requires a high school diploma or equivalent, • At least 1-2 years of experience in a Manufacturing related position preferred, • Experience with soldering, inspection, and quality control are a plus. The estimated hourly salary range for this position is $16.00 to $20.00, though a candidate's salary will be determined on a range of factors, including, but not limited to, qualifications and experience. Qualified candidates, please apply. For further information regarding this position please call us at 607-723-7058. Eastern Staffing & Recruiting is an affirmative action and equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veterans’ status or any other legally protected basis. Company DescriptionEstablished in 1985, Eastern Staffing & Recruiting was created to provide an extensive range of workforce solutions; staffing, recruiting, and payroll servicing. From the beginning, our goals have always been to support people, build strategic partnerships and offer world-class solutions. A lot has happened in over 30 years; globalization, recessions, inflation, rebranding and the nature of our recruiting and business focus. What has not changed is our desire to be the best staffing and recruiting company out there.Established in 1985, Eastern Staffing & Recruiting was created to provide an extensive range of workforce solutions; staffing, recruiting, and payroll servicing. From the beginning, our goals have always been to support people, build strategic partnerships and offer world-class solutions.\r\n\r\nA lot has happened in over 30 years; globalization, recessions, inflation, rebranding and the nature of our recruiting and business focus. What has not changed is our desire to be the best staffing and recruiting company out there.

At Bose Corporation, we believe sound is the most powerful force on earth - and for over 60 years, we have been a company built on innovation, excellence, and independence. Privately owned, fiercely customer-focused, and driven by our values, we continue to lead industries and transform lives through sound. Today, Bose Corporation is entering an exciting new era. Across multiple global Business Units and Global Functions, we are shaping the future of audio technology, automotive, luxury, and premium experiences. We invite you to join us in this transformation. Job Description Job Title: PCB Hand Assembler Department: Printed Circuit Boards Reports To: PCB Supervisor Location: Binghamton, NY Position Summary: The PCB Hand Assembler is responsible for the accurate assembly of electronic circuit boards according to detailed work instructions, drawings, and bills of materials. This role involves identifying and installing the correct electronic components, applying masking materials where required, and preparing assemblies for wave soldering and subsequent inspection. Attention to detail, manual dexterity, and quality workmanship are essential to ensure boards meet company and customer standards. Key Responsibilities: \n • \nAssembly & Preparation\n, • Read and follow work instructions, assembly drawings, and component placement diagrams to correctly identify and install parts on printed circuit boards (PCBs).\n, • Handle and place through-hole components such as resistors, capacitors, connectors, and other relevant components using hands, hand tools or tweezers.\n, • Apply masking materials or high-temperature tape to designated areas prior to wave soldering to protect components and keep solder-free zones.\n, • Verify component orientation, polarity, and value before insertion or masking.\n, • Trim component leads to specified lengths prior to soldering operations.\n\n\n, • \nQuality & Inspection\n, • Perform visual inspections to ensure correct component placement, alignment, and solder mask coverage.\n, • Identify and report discrepancies, missing components, improperly labeled or mis-picked parts or damaged boards.\n, • Work closely with quality control personnel to address any nonconformities or rework requirements.\n\n\n, • \nDocumentation & Process Control, • Accurately document assembly steps, component traceability, and completed operations on production travelers or electronic records.\n\n\n Qualifications: \n • High school diploma or equivalent required.\n, • Minimum 1-3 years of experience in electronic assembly or related manufacturing environment preferred.\n, • Ability to read and follow work instructions, schematics, and component identifiers.\n, • Knowledge of electronic components and familiarity with PCB layouts.\n, • Strong manual dexterity, attention to detail, and hand-eye coordination.\n, • Experience working in an ESD-controlled environment a plus.\n, • IPC-A-610 certification preferred but not required (company-provided training available).\n\n Working Conditions: Work is performed in an electronics assembly area with exposure to small components, flux fumes, and soldering equipment. You must wear appropriate ESD & PPE protection (as documented in our safety manual). Work may involve sitting for extended periods and using magnification tools for inspection. At Bose, you're inspired to be and do your best and are rewarded for your unique talents! Our compensation is thoughtfully tailored to your skills, experience, education, and location, and goes beyond base salary. The hiring range for this position in the primary work location of Binghamton, New York is: $16.00-$19.92 per hour.The hiring range for other Bose work locations may vary.In addition to competitive base pay we offer rewards including bonus programs, comprehensive health and welfare benefits, a 401(k) plan, plus exclusive perks designed to support your wellbeing, and a generous employee discount where you can immerse yourself in our products and experiences. We are a proudly independent company-driven by purpose, guided by our values, and united by a belief in the power of sound. As the world leader in audio experiences, we're creating what's next-pushing boundaries and delivering transformative sound experiences for people everywhere. Join us and make your next career move a mic-drop. Let's Make Waves. Bose is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status, or any other legally protected characteristics. The EEOC's "Know Your Rights: Workplace discrimination is illegal" Poster is available here: . Bose is committed to providing reasonable accommodations to individuals with disabilities. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to [email protected]. Please include "Application Accommodation Request" in the subject of the email. Our goal is to create an atmosphere where every candidate feels supported and empowered in the interviewing process. Diversity and inclusion are integral to our success, and we believe that providing reasonable accommodation is not only a legal obligation but also a fundamental aspect of our commitment to being an employer of choice. We recognize that individuals may have different needs and requirements based on their abilities, and we provide reasonable accommodations to ensure ideal conditions are met during the application process.

Job Description The Controls and Avionics (CAS) Aftermarket is seeking to add an Assembler to the team. The CAS Aftermarket team is responsible for maintaining, repairing, modifying, and overhauling customer owned flight control systems. Our experienced staff tackles unique problems that come back from the field and ensures that the customer gets quality returns in a timely manner. We do this through a collaborative and cross functional approach in order to provide overall customer satisfaction. Within the aftermarket area of the Endicott Site, the team works a high variety of fielded product that is returned for modification or repair from the end user. The assembly team works directly with support staff and test personnel to diagnose issues within a product, perform repair, and return unit to customer in a timely and cost effective manner. Working in this environment provides a chance to work diverse product, continually learn, and allows for each day to be a new experience. Typical requirements for daily activities include: assemble electronic components, assemblies, subassemblies, kits and modules according to specific written instructions, wiring lists and diagrams, routing instructions and process sheets. Use appropriate tooling and machinery as provided. Verify and inspect products to ensure conformance with requirements and perform rework as needed. Perform mechanical and electrical assembly operations in the build of electronic assemblies using standard measuring tools and techniques, following work order instructions, policies and procedures. Perform soldering and inspection when/if certified. Cross-train in other assembly positions, participate and support continuous improvement activities, perform other duties and responsibilities as required. Required Education, Experience, & Skills \n • High School Diploma or GED\n, • Strong work ethic\n, • Capability to read and perform assembly work as described in written instructions\n, • Manufacturing experience assembling product\n, • IPC J-STD-001 certification\n Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

FUNCTION: Assemble Printed Circuit Board/Electronic Box Build for aerospace products under the leadership of the Manager of Operations. DUTIES & RESPONSIBILITIES: • Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities., • Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly., • Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain., • Ability to perform duties of the conformal coat processes., • Ability to perform duties in module cleaning, potting and testing., • Ability to learn the use of bench top equipment, test equipment, hands tools and computers., • Ability to assemble small mechanical products - springs, gears, mechanical subassemblies., • Ability to assembly and test electro and electro-mechanical products., • Participate in meetings to determine work priorities., • Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required., • Adherence to company policies such as safety, respect for others, integrity and workplace rules., • Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development. EDUCATION/EXPERIENCE: • High School Diploma or GED, • Two (2) years prior experience in Production and/or Manufacturing. Experience in the Manufacturing of Aircraft Instruments or Electronics desired. Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $45,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Binghamton

At Bose Corporation, we believe sound is the most powerful force on earth - and for over 60 years, we have been a company built on innovation, excellence, and independence. Privately owned, fiercely customer-focused, and driven by our values, we continue to lead industries and transform lives through sound. Today, Bose Corporation is entering an exciting new era. Across multiple global Business Units and Global Functions, we are shaping the future of audio technology, automotive, luxury, and premium experiences. We invite you to join us in this transformation. Job Description Job Title: PCB Hand Assembler Department: Printed Circuit Boards Reports To: PCB Supervisor Location: Binghamton, NY Position Summary: The PCB Hand Assembler is responsible for the accurate assembly of electronic circuit boards according to detailed work instructions, drawings, and bills of materials. This role involves identifying and installing the correct electronic components, applying masking materials where required, and preparing assemblies for wave soldering and subsequent inspection. Attention to detail, manual dexterity, and quality workmanship are essential to ensure boards meet company and customer standards. Key Responsibilities: \n • \nAssembly & Preparation\n, • Read and follow work instructions, assembly drawings, and component placement diagrams to correctly identify and install parts on printed circuit boards (PCBs).\n, • Handle and place through-hole components such as resistors, capacitors, connectors, and other relevant components using hands, hand tools or tweezers.\n, • Apply masking materials or high-temperature tape to designated areas prior to wave soldering to protect components and keep solder-free zones.\n, • Verify component orientation, polarity, and value before insertion or masking.\n, • Trim component leads to specified lengths prior to soldering operations.\n\n\n, • \nQuality & Inspection\n, • Perform visual inspections to ensure correct component placement, alignment, and solder mask coverage.\n, • Identify and report discrepancies, missing components, improperly labeled or mis-picked parts or damaged boards.\n, • Work closely with quality control personnel to address any nonconformities or rework requirements.\n\n\n, • \nDocumentation & Process Control, • Accurately document assembly steps, component traceability, and completed operations on production travelers or electronic records.\n\n\n Qualifications: \n • High school diploma or equivalent required.\n, • Minimum 1-3 years of experience in electronic assembly or related manufacturing environment preferred.\n, • Ability to read and follow work instructions, schematics, and component identifiers.\n, • Knowledge of electronic components and familiarity with PCB layouts.\n, • Strong manual dexterity, attention to detail, and hand-eye coordination.\n, • Experience working in an ESD-controlled environment a plus.\n, • IPC-A-610 certification preferred but not required (company-provided training available).\n\n Working Conditions: Work is performed in an electronics assembly area with exposure to small components, flux fumes, and soldering equipment. You must wear appropriate ESD & PPE protection (as documented in our safety manual). Work may involve sitting for extended periods and using magnification tools for inspection. At Bose, you're inspired to be and do your best and are rewarded for your unique talents! Our compensation is thoughtfully tailored to your skills, experience, education, and location, and goes beyond base salary. The hiring range for this position in the primary work location of Binghamton, New York is: $16.00-$19.92 per hour.The hiring range for other Bose work locations may vary.In addition to competitive base pay we offer rewards including bonus programs, comprehensive health and welfare benefits, a 401(k) plan, plus exclusive perks designed to support your wellbeing, and a generous employee discount where you can immerse yourself in our products and experiences. We are a proudly independent company-driven by purpose, guided by our values, and united by a belief in the power of sound. As the world leader in audio experiences, we're creating what's next-pushing boundaries and delivering transformative sound experiences for people everywhere. Join us and make your next career move a mic-drop. Let's Make Waves. Bose is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status, or any other legally protected characteristics. The EEOC's "Know Your Rights: Workplace discrimination is illegal" Poster is available here: . Bose is committed to providing reasonable accommodations to individuals with disabilities. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to [email protected]. Please include "Application Accommodation Request" in the subject of the email. Our goal is to create an atmosphere where every candidate feels supported and empowered in the interviewing process. Diversity and inclusion are integral to our success, and we believe that providing reasonable accommodation is not only a legal obligation but also a fundamental aspect of our commitment to being an employer of choice. We recognize that individuals may have different needs and requirements based on their abilities, and we provide reasonable accommodations to ensure ideal conditions are met during the application process.

Job Description The Controls and Avionics (CAS) Aftermarket is seeking to add an Assembler to the team. The CAS Aftermarket team is responsible for maintaining, repairing, modifying, and overhauling customer owned flight control systems. Our experienced staff tackles unique problems that come back from the field and ensures that the customer gets quality returns in a timely manner. We do this through a collaborative and cross functional approach in order to provide overall customer satisfaction. Within the aftermarket area of the Endicott Site, the team works a high variety of fielded product that is returned for modification or repair from the end user. The assembly team works directly with support staff and test personnel to diagnose issues within a product, perform repair, and return unit to customer in a timely and cost effective manner. Working in this environment provides a chance to work diverse product, continually learn, and allows for each day to be a new experience. Typical requirements for daily activities include: assemble electronic components, assemblies, subassemblies, kits and modules according to specific written instructions, wiring lists and diagrams, routing instructions and process sheets. Use appropriate tooling and machinery as provided. Verify and inspect products to ensure conformance with requirements and perform rework as needed. Perform mechanical and electrical assembly operations in the build of electronic assemblies using standard measuring tools and techniques, following work order instructions, policies and procedures. Perform soldering and inspection when/if certified. Cross-train in other assembly positions, participate and support continuous improvement activities, perform other duties and responsibilities as required. Required Education, Experience, & Skills \n • High School Diploma or GED\n, • Strong work ethic\n, • Capability to read and perform assembly work as described in written instructions\n, • Manufacturing experience assembling product\n, • IPC J-STD-001 certification\n Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

FUNCTION: Assemble Printed Circuit Board/Electronic Box Build for aerospace products under the leadership of the Manager of Operations. DUTIES & RESPONSIBILITIES: • Work will include but not limited to: assembly, soldering, inspection, packaging, process improvements and training as well as other related activities., • Ability to perform SMT and/or PTH soldering of Printed Circuit Boards. Experienced in SMT and PTH rework and touch-up of PCB. Need skills in component bond, component assembly and hardware assembly., • Ability to operate machinery utilized in the PCB area such as the Wave solderer, CS-400, pinning machine and solder fountain., • Ability to perform duties of the conformal coat processes., • Ability to perform duties in module cleaning, potting and testing., • Ability to learn the use of bench top equipment, test equipment, hands tools and computers., • Ability to assemble small mechanical products - springs, gears, mechanical subassemblies., • Ability to assembly and test electro and electro-mechanical products., • Participate in meetings to determine work priorities., • Commitment to customer and business focus in areas such as quality of work, attendance and productivity. Overtime may be required., • Adherence to company policies such as safety, respect for others, integrity and workplace rules., • Willingness to attend additional training, either OJT or off-site training recommended by the management staff to further personal development. EDUCATION/EXPERIENCE: • High School Diploma or GED, • Two (2) years prior experience in Production and/or Manufacturing. Experience in the Manufacturing of Aircraft Instruments or Electronics desired. Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $45,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Binghamton

Job Description Job Description Summary: Responsible for performing a wide variety of basic manufacturing operations on assemblies or sub-assemblies. Works on assignments that require judgment and has a role in decision making. Acquires job skills and learns company policies and procedures to enable them to learn semi routine tasks. Will be required to assist in solving problems. Will be required to train less experienced manufacturing associates. Will be required to lead department or teams as an extension of the manager involving personnel issues. Knowledge/Skills: – Manufacturing experience with technical insight on specific equipment or processes – Ability to follow written manufacturing instructions and general manufacturing designs/drawings/diagrams – Computer skills and use of computer programs/software specific to the manufacturing process, tracking and traceability of product – Understands processes and procedures and can recognize non-conformance or problems in production processes – Is involved in process improvement activities. – Fosters and maintain a high-level of teamwork and pride between all support groups to ensure customer commitments – Must be able to communicate effectively, verbally and in writing – Must be able to demonstrate effective listening skills – Must be able to facilitate effectively in team meetings, daily job assignments and problem resolution Qualifications – Education/Experience: – Basic reading, writing and math skills – Typically requires 6+ years of prior manufacturing experience – Must be able to mentor or train peers – Must be able to communicate and support a team environment – Must demonstrate leadership skills and support company policies Duties/Responsibilities: (Position Specific) – Operate and certify on non-complex and complex operations within current process – In-depth knowledge of process within current department, along with processes that feed and receive the product – Flexibility to cross train and apply skills in other areas of the department – Achieve quality targets and drive improvements at certified processes – Ability to evaluate and make recommendations on process/product issues – Informs management of recurring defects – variations to procedures – Accountable for individual results – Give direction and support work groups through strong leadership skills – Formal presentations on manufacturing activity to co-workers, support departments and management if needed. – Ensures manufacturing line is fully supplied to produce product and order supplies when applicable – Tracking of co-workers annual certifications – Establishes cross training targets for the department and assures targets are met – Assures zero workmanship errors within the process and assures process is operating within specifications – Recognizes and is proactive in defining most defects with minimal assistance and implements corrective action – Proactively informs management and manufacturing associates of recurring defects or potential process issues – Participate and pitch on-time delivery and identifies detractors – Provides work direction and training to others as requested – Adheres to established safety practices, environmental management and quality systems requirements Physical/Environmental Requirements: – Requires visual acuity (visual ability to resolve fine detail) and manual dexterity (fine hand and finger movements) – Requires limited supervision for routine processes, can implement changes with detailed instruction – Must be available for overtime work – Must be able to stand for periods up to 4 hours – Must be able to lift at least 10lbs frequently; up to 35lbs occasionally, and heavier weights with assistance – Must be able to wear required safety protective equipment including but not limited to safety shoes and glasses – May work in a clean room environment and wear clean room attire – Must be able to work with or around chemicals 1st Shift

Job Description Job Description Summary: Responsible for performing a wide variety of basic manufacturing operations on assemblies or sub-assemblies. Works on assignments that require judgment and has a role in decision making. Acquires job skills and learns company policies and procedures to enable them to learn semi routine tasks. Will be required to assist in solving problems. Will be required to train less experienced manufacturing associates. Will be required to lead department or teams as an extension of the manager involving personnel issues. Knowledge/Skills: – Manufacturing experience with technical insight on specific equipment or processes – Ability to follow written manufacturing instructions and general manufacturing designs/drawings/diagrams – Computer skills and use of computer programs/software specific to the manufacturing process, tracking and traceability of product – Understands processes and procedures and can recognize non-conformance or problems in production processes – Is involved in process improvement activities. – Fosters and maintain a high-level of teamwork and pride between all support groups to ensure customer commitments – Must be able to communicate effectively, verbally and in writing – Must be able to demonstrate effective listening skills – Must be able to facilitate effectively in team meetings, daily job assignments and problem resolution Qualifications – Education/Experience: – Basic reading, writing and math skills – Typically requires 6+ years of prior manufacturing experience – Must be able to mentor or train peers – Must be able to communicate and support a team environment – Must demonstrate leadership skills and support company policies Duties/Responsibilities: (Position Specific) – Operate and certify on non-complex and complex operations within current process – In-depth knowledge of process within current department, along with processes that feed and receive the product – Flexibility to cross train and apply skills in other areas of the department – Achieve quality targets and drive improvements at certified processes – Ability to evaluate and make recommendations on process/product issues – Informs management of recurring defects – variations to procedures – Accountable for individual results – Give direction and support work groups through strong leadership skills – Formal presentations on manufacturing activity to co-workers, support departments and management if needed. – Ensures manufacturing line is fully supplied to produce product and order supplies when applicable – Tracking of co-workers annual certifications – Establishes cross training targets for the department and assures targets are met – Assures zero workmanship errors within the process and assures process is operating within specifications – Recognizes and is proactive in defining most defects with minimal assistance and implements corrective action – Proactively informs management and manufacturing associates of recurring defects or potential process issues – Participate and pitch on-time delivery and identifies detractors – Provides work direction and training to others as requested – Adheres to established safety practices, environmental management and quality systems requirements Physical/Environmental Requirements: – Requires visual acuity (visual ability to resolve fine detail) and manual dexterity (fine hand and finger movements) – Requires limited supervision for routine processes, can implement changes with detailed instruction – Must be available for overtime work – Must be able to stand for periods up to 4 hours – Must be able to lift at least 10lbs frequently; up to 35lbs occasionally, and heavier weights with assistance – Must be able to wear required safety protective equipment including but not limited to safety shoes and glasses – May work in a clean room environment and wear clean room attire – Must be able to work with or around chemicals 2nd Shift

Job Description JOB SUMMARY/OBJECTIVE: The Manufacturing Harness Assembly Group Lead will be responsible for performing a wide variety of complex manufacturing operations on assemblies or sub-assemblies. Works on assignments that require judgment and has a role in decision making. Acquires job skills and learns company policies and procedures to enable them to learn semi routine tasks. Will be required to assist in solving problems. Will be required to train less experienced manufacturing associates. Will be required to lead department or teams as an extension of the manager involving personnel issues. Must be able to plan to manage workload to meet customer delivery based on build time. To excel in this key role, you must be able communicate clearly. This position’s specific duties and responsibilities include, but are not limited to: KNOWLEDGE/SKILLS: • Manufacturing experience with technical insight on specific equipment or processes., • Ability to follow written manufacturing instructions and general manufacturing designs/drawings/diagrams., • Computer skills and use of computer programs/software specific to the manufacturing process, tracking and traceability of product., • Understands processes and procedures and can recognize non-conformance or problems in production processes and implement solutions., • Is involved in process improvement activities., • Fosters and maintain a high-level of teamwork and pride between all support groups to ensure customer commitments., • Must be able to communicate effectively, verbally and in writing., • Must be able to demonstrate effective listening skills., • Must be able to facilitate effectively in team meetings, daily job assignments and problem resolution. QUALIFICATIONS - EDUCATION/EXPERIENCE: • Basic reading, writing and math skills., • Must be a Manufacturing Associate level 2 or higher., • Preferred - skills in assigning UID to work orders / inventory adjustments., • Stock inventory transaction., • Typically requires 6+ years of prior manufacturing experience., • Must be able to mentor or train peers., • Must be able to communicate and support a team environment., • Must demonstrate leadership skills and support company policies. DUTIES/RESPONSIBILITIES: (POSITION SPECIFIC) • Operate and certify on non-complex and complex operations within current process., • In-depth knowledge of process within current department, along with processes that feed and receive the product (Complex cables.), • Flexibility to cross train and apply skills in other areas of the department., • Achieve quality targets and drive improvements at certified processes., • Ability to evaluate and make recommendations on process/product issues., • Informs management of recurring defects – variations to procedures, • Accountable for individual results from team (productivity / utilization.), • Give direction and support work groups through strong leadership skills., • Formal presentations on manufacturing activity to co-workers, support departments and management if needed., • Ensures manufacturing line is fully supplied to produce product and order supplies when applicable., • Tracking of co-worker’s annual certifications., • Establishes cross training targets for the department and assures targets are met, • Assures zero workmanship errors within the process and assures process is operating within specifications., • Recognizes and is proactive in defining most defects with minimal assistance and implements corrective action., • Proactively informs management and manufacturing associates of recurring defects or potential process issues., • Participate and pitch on-time delivery and identifies detractors., • Provides work direction and training to others as requested., • Adheres to established safety practices, environmental management and quality systems requirements. PHYSICAL/ENVIRONMENTAL REQUIREMENTS: • Requires visual acuity (visual ability to resolve fine detail) and manual dexterity (fine hand and finger movements.), • Requires limited supervision for routine processes, can implement changes with detailed instruction., • Must be available for overtime work., • Must be able to stand for periods up to 4 hours., • Must be able to lift at least 10lbs frequently; up to 35lbs occasionally, and heavier weights with assistance., • Must be able to wear required safety protective equipment including but not limited to safety shoes and glasses., • May work in a clean room environment and wear clean room attire., • Must be able to work with or around chemicals. WORK AUTHORIZATION/SECURITY CLEARANCE: • No special clearances required. HOURS: • FULL-TIME / DAYS WHAT WE OFFER: • 401(k), • Health, Dental, & Vision Insurance, • Life Insurance, • PTO & Paid Holiday, • Long & Short Disability, • Opportunities for career growth and development., • A collaborative and dynamic work environment., • Recognition and rewards for exceptional performance. MUST BE ABLE TO COMMUTE: • Binghamton, NY (Required) WORK LOCATION: • In person i3 is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

BAE Systems is looking to hire a 2nd shift Space Stockroom Associate on our Space Electronics Manufacturing team in Endicott, New York.As a stockroom associate, you will be supporting the THAAD circuit card production area by kitting jobs to be used by the assembly team, issuing replacement parts to

Job Description JOB SUMMARY/OBJECTIVE: Under the supervision of Manager 2, Engineering, the Supervisor will be responsible for managing the activities of the NPI and Test departments. This position will be responsible for planning, scheduling and coordinating the department activities in order to deliver manufactured products in a timely manner. ESSENTAL DUTIES & RESPONSIBILITIES: Test Engineering: • Have test programs ready as well as test setups for reoccurring orders and or larger volume orders., • Keep track of attendance, shopfloor transactions, efficiencies, documenting any issues with employees, keeping track of workmanship, communicating with the teams, etc., • Communicate with Program Managers, other Supervisors as well as Engineering with issues. All test folders need filing, updated if Rev changes and follow all of our Quality procedures., • Other Duties as assigned. QUALIFICATIONS - EDUCATION /EXPERIENCE: • 3 years supervisory experience in a manufacturing or engineering environment, • Communicates effectively, both verbally and in writing., • Ability to work in a highly dynamic environment with an emphasis on teamwork, communication and customer satisfaction, • Good use of Microsoft Excel and Word., • Strong electronics/ electrical knowledge., • Associates degree in Management or Engineering discipline with Supervisory work experience, • Familiar with ISO 9000 standards PREFERRED QUALIFICATIONS: • Manufacturing experience with technical insight on specific equipment or processes, • Understands processes and procedures and can recognize non-conformance or problems, • Blue Print Reading, • Experience with building Cable Assemblies, • IPC 610 / 620 certifications, • Bachelors (BS) in Management and or Engineering discipline PHYSICAL REQUIREMENTS: • Must be able to navigate shop floor., • Occasional lifting/carrying of product throughout the manufacturing floor, dock, and warehouse., • Must be able to use material handling equipment., • Prolonged Standing and walking., • Prolonged periods of computer work., • Must be able to lift. Carry 10 – 50 lbs., • Required to work around chemicals and loud noises., • Must be able to work in a clean room and wear clean room attire., • Must be able to wear required safety protective equipment including but not limited to safety shoes, glasses or ESD coats. HOURS: • Full Time WORK AUTHORIZATION/SECURITY CLEARANCE: • None. Benefits: • Range of benefits available MUST BE ABLE TO COMMUTE: • Binghamton, NY (Required) WORK LOCATION: • In person I3 Assembly LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination

Job Description JOB SUMMARY/OBJECTIVE The Industrial Engineer 1 is responsible for analyzing, developing, and optimizing labor standards, production processes, and material flows to improve operational efficiency, cost effectiveness, and throughput within a contract manufacturing environment. This role conducts detailed time and motion studies, maintains labor models used for quoting and capacity planning, and applies Lean Manufacturing principles to drive continuous improvement initiatives across production and warehouse operations. The Industrial Engineer 1 partners closely with cross-functional teams to identify bottlenecks, improve layouts, enhance productivity, and support data-driven decision making. Clear, effective communication and strong analytical skills are critical to success in this role. ESSENTIAL DUTIES & RESPONSIBILITIES Labor Analysis & Standards: • Conduct, document, and maintain time and motion studies for all labor operations., • Develop, maintain, and update labor standards and labor cost models for existing and new production processes., • Maintain the labor model used for quoting to ensure accurate estimates across all work processes., • Analyze equipment productivity and performance data; research, recommend, and support implementation of improvements., • Apply Lean Manufacturing principles to maximize production efficiency, reduce waste, and improve yields., • Create and execute continuous improvement and operational excellence plans., • Analyze and recommend improvements to material flow throughout production, receiving, storage, and shipping processes., • Ensure production and warehouse floor layouts are designed to support optimal efficiency and throughput., • Build capacity models and simulations to analyze production requirements and identify constraints., • Develop dashboards and data visualizations that highlight performance trends and improvement opportunities., • Collaborate with engineering, operations, quality, and management teams to implement improvements., • Support proposal and quoting efforts by developing labor cost estimates and capacity assessments., • Maintain clear documentation of studies, standards, and improvement initiatives., • Perform addition duties and special projects as assigned. KNOWLEDGE, SKILLS & ABILITIES • Strong analytical, problem-solving, and data interpretation skills., • Demonstrated ability to manage multiple projects concurrently., • Self-starter with a hands-on approach and strong initiative., • Excellent interpersonal, communication, and documentation skills., • Ability to work independently with minimal supervision while collaborating effectively in team settings., • High attention to detail and commitment to continuous improvement. EDUCATION & EXPERIENCE • Bachelor’s degree in Industrial Engineering or a related quantitative discipline, or equivalent combination of education and experience., • Experience using advanced Excel or other analytical toolsets., • Familiarity with mechanical design software such as Inventor or SolidWorks., • Experience with CAD, Mentor Graphics, Cadence Allegro, or Zuken is a plus., • Understanding of manufacturing processes with the ability to recognize non-conformance and operational issues., • Ability to work effectively in a fast-paced, team-oriented contract manufacturing environment. PHYSICAL/ENVIRONMENTAL REQUIREMENTS • This position is conducted in a combination of office and warehouse/production environments. The role involves regular computer use, attending meetings, and periods of sitting, as well as routine movement throughout manufacturing areas that may include walking, standing, and occasional handling of materials. Work may occur in areas with varying temperatures, noise levels, and typical industrial conditions. The company is committed to providing reasonable accommodations to enable individuals with disabilities to perform the essential functions of the role. WORK AUTHORIZATION/SECURITY CLEARANCE: • This position requires access to information subject to the International Traffic in Arms Regulations (ITAR)., • Must be a U.S. person. ITAR defines a U.S. person as a U.S. citizen, U.S. Permanent Resident (Green Card holder), Political Asylee, or Refugee. POSITION DETAILS: • Full-Time, • In-Person, • We offer a comprehensive suite of competitive benefits that reflects our commitment to employee well-being and professional growth. i3 Assembly, LLC. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Job Description Operations: Critical Material Handler/Control is a full-time hands-on position where focus and attention to detail is essential. This position is responsible for the verification, assignment to the corresponding project, receive and then maintain individual item parts kits for production assembly. The position also requires evolving knowledge of the items received, learning then driving the movement of the received items to their progressive next operational steps. Position will also help out other functions: Purchasing, Administration and Office Management. Solid experience/working knowledge of: PC, MS Office, office equipment. Salary based on ability, drive and experience. But once in the door it all you! Must be responsible, dependable, able to work alone and with others in a dynamic environment. Company DescriptionCSI is a custom engineering and manufacturing company that designs, develops and delivers custom test systems/solutions in months not years. We are a services company working together to deliver custom products in a very dynamic environment.CSI is a custom engineering and manufacturing company that designs, develops and delivers custom test systems/solutions in months not years. We are a services company working together to deliver custom products in a very dynamic environment.

Job Description Hands-on Electronics Technician Responsibilities include: * Splicing * Soldering * Crimping * Inspection * Assembly Qualifications: * 3-5 years experience * Experience in all Aspects of Electronics production * Requires knowledge of several aspects of custom mechanical and electrical production * Attention to detail * Able to work independently * PWB assembly a plus * Certification a plus Company DescriptionCSI is a custom engineering and manufacturing company that designs, develops and delivers custom test systems/solutions in months not years. We are a services company working together to deliver custom products in a very dynamic environment.CSI is a custom engineering and manufacturing company that designs, develops and delivers custom test systems/solutions in months not years. We are a services company working together to deliver custom products in a very dynamic environment.

Job Description JOB SUMMARY/OBJECTIVE The Injection Mold Operator is responsible for supporting aerospace manufacturing operations through the setup, operation, and monitoring of injection molding equipment used to produce precision plastic components. This position requires strict adherence to quality standards, detailed documentation, and consistent compliance with aerospace manufacturing requirements. The ideal candidate demonstrates strong process discipline, attention to detail, and a commitment to producing defect-free parts in a regulated environment. ESSENTIAL DUTIES & RESPONSIBILITIES Including but not limited to: • Operate plastic injection molding machines to produce aerospace-grade components in accordance with approved work instructions and production schedules., • Set up molds, tooling, and machine parameters following established process sheets and engineering documentation., • Monitor molding processes and make parameter adjustments to maintain dimensional accuracy, surface finish, and part consistency., • Perform in-process and final inspections using precision measuring equipment such as calipers, micrometers, and height gauges., • Verify raw material certifications, lot numbers, and resin handling procedures to ensure full material traceability., • Accurately complete production records, inspection documentation, and non-conformance reports in accordance with AS9100 and internal quality requirements., • Identify process deviations or equipment issues and communicate findings Quality, Engineering, or Maintenance as required., • Perform routine machine cleaning and basic preventive maintenance tasks to support equipment reliability., • Maintain a clean, organized, and safe work environment in compliance with all safety, ESD, and housekeeping standards., • Support continuous improvement initiatives related to quality, efficiency, and process control. KNOWLEDGE, SKILLS & ABILITIES • High attention to detail and accuracy, • Strong process discipline and documentation habits, • Mechanical aptitude and troubleshooting ability, • Quality-driven mindset, • Effective communication and teamwork skills, • Understanding of aerospace compliance and traceability requirements EDUCATION & EXPERIENCE • High school diploma or equivalent required; technical or manufacturing training preferred., • Previous experience in injection molding within aerospace, defense, medical, or other high-precision manufacturing environments strongly preferred., • Working knowledge of AS9100, ISO, or similar quality management systems., • Ability to read and interpret engineering drawings, specifications, and inspection criteria., • Understanding of plastic resin, molding parameters, and basic process troubleshooting., • Proficiency in use of precision measuring and inspection tools., • Strong documentation skills with the ability to follow controlled processes and procedures., • Ability to lift up to 30-50 pounds and perform repetitive tasks as required. PHYSICAL/ENVIRONMENTAL REQUIREMENTS • This position is conducted primarily in a warehouse and production environment and involves frequent movement, including walking, standing, lifting, and handling materials. Work may require operating material-handling equipment and performing tasks in areas with varying temperatures, noise levels, and typical industrial conditions. The company is committed to providing reasonable accommodations to enable individuals with disabilities to perform the essential functions of the role. WORK AUTHORIZATION/SECURITY CLEARANCE: • Must be a US Citizen HOURS: • We offer a comprehensive suite of competitive benefits that reflects our commitment to employee well-being and professional growth. WORK LOCATION: • Must be able to commute to Binghamton, NY (required), • On-site position i3 Assembly, LLC. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one’s employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Job DescriptionDescription: GENERAL JOB DESCRIPTION The Production Associate plays a key role in supporting daily manufacturing operations to ensure products are produced safely, accurately, and on schedule. This is a hands-on position that requires attention to detail, consistency, and a strong commitment to quality and safety. Production Associates are cross-trained across various functions and are expected to learn multiple tasks, maintain productivity standards, and contribute to a positive and safety-focused work environment. PRIMARY DUTIES AND RESPONSIBILITIES -Successfully complete on-site training and demonstrate proficiency in assigned production tasks. -Perform hands-on production work including assembly, machine operation support, material handling, packaging, and other manufacturing-related tasks as assigned. -Follow all written procedures, work instructions, and verbal directions. -Perform routine quality checks on products and components to ensure adherence to company standards. -Maintain productivity levels while upholding quality expectations. -Communicate effectively with supervisors and team members to meet production goals and deadlines. -Maintain a clean, organized, and safe work environment in accordance with company standards. -Adhere to all safety policies and promptly report any hazards or concerns. -Maintain regular and punctual attendance. -Support cross-departmental production needs to maintain workflow efficiency and reduce downtime. Requirements: QUALIFICATIONS FOR THE JOB Education: -High school diploma or equivalent preferred. Experience: -Prior manufacturing or general production experience is preferred; however, we will train individuals who demonstrate reliability and a strong work ethic. KNOWLEDGE, SKILLS, ABILITIES AND COMPETENCIES -Strong attendance and reliability — punctuality is essential. -Ability to work efficiently while maintaining high quality standards. -Excellent attention to detail, including accurate product counts and inspection. -Basic reading, comprehension, and math skills. -Ability to follow instructions and adapt to changing priorities. -Comfortable working in a fast-paced, deadline-driven environment. -Flexible schedule with ability to work overtime as needed. -Ability to work independently and collaboratively within a team. -Ability to stand for extended periods of time. -Strong organizational and multitasking skills. -Willingness to learn new processes, tools, and systems. -Proactive mindset with continuous improvement focus. -Commitment to workplace safety at all times. -Physically capable of performing repetitive manual tasks including lifting, bending, and reaching. $16 - $19 per hour, based on experience and skill level TeamWorld is hiring Production Associates to support our manufacturing operations in Binghamton and Conklin. This is a hands-on, fast-paced production role ideal for dependable individuals who take pride in quality work.