Best manufacturing jobs in Glen Cove, New YorkCreate job alerts

Job DescriptionSanitation Associate Pay Rate: $23/hour Schedule: Monday–Thursday, 11:00 PM – 7:30 AM; Saturday 7:00 AM – 5:00 PM (hours subject to business needs) Requirements: Steel-toe boots required ? Position Overview This is a physically demanding, detail-oriented sanitation role focused on deep cleaning and sanitizing production equipment in a food manufacturing environment. The position involves disassembling and thoroughly cleaning equipment used to transport food products, ensuring compliance with strict quality and safety standards. ? Key Responsibilities • Disassemble, clean, and reassemble food processing equipment, including large kettles and piping systems, • Perform deep cleaning of kettles (comparable in size to hot tubs) using manual scrubbing, chemicals, and power washing equipment, • Follow Sanitation Standard Operating Procedures (SSOP) to ensure thorough cleaning and compliance, • Use appropriate cleaning chemicals safely, adhering to dilution guidelines and safety standards, • Operate Clean-in-Place (CIP) systems and perform tasks such as milk silo cleaning, • Complete sanitation within required timeframes (approximately 60–75 minutes once fully trained), • Maintain accurate sanitation logs, daily reports, and required documentation, • Work closely with Quality Assurance teams, who inspect and verify cleanliness using testing procedures, • Provide support and cross-coverage for other departments as needed, • Assist in training and guiding new sanitation team members when applicable ? Qualifications & Skills • Ability to follow written and verbal instructions, including sanitation procedures and safety protocols, • Knowledge of MSDS (Material Safety Data Sheets) and chemical safety guidelines, • Mechanically inclined with ability to dismantle and reassemble equipment, • Strong attention to detail and commitment to cleanliness and quality standards, • Ability to work independently and as part of a team in a fast-paced environment, • Basic computer skills for documentation and reporting ? Physical & Work Environment Requirements • Ability to stand for entire shift, • Ability to lift up to 50 lbs regularly, • Ability to work in wet, hot, and cold environments, • Exposure to noise typical of a production environment, • Use of PPE including protective boots, gloves, and sanitation gear required, • Must be fluent in reading and writing in English or Spanish for safety purposes As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description BCforward is looking for a motivated Warehouse Worker in 50 Ludy Street, Hicksville, NY 11801 Position Title: Warehouse Worker Location: 50 Ludy Street, Hicksville, NY 11801 Expected Duration: 3+ Months Shift: MON - FRI, 3pm to 1:30am Pay Rate: $18.00 Position Description Shift: MON - FRI, 6am - 3:30am. Shift schedules could include weekends. Hours subject to business needs. *Need Solid Transportation* Steel toed shoes are required but we may be able to provide composite safety shoe covers if they do not have them readily available • Self-Reliant and able to accurately work under limited supervision, • Attending area of transfer from filler to chiller., • Inform Supervisors and or Lead of any discrepancy on product information., • Transferring carts of production in and out of chillers and placing them orderly at the WIP area., • Orient product alignment in the Garvey table area, • Flip trays in chillers when needed., • Reworking product that is below specifications., • Keeping work area clean and organized, following the 5 S program., • Promoting a safe work environment at all times., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations., • Other duties, as assigned including transferring to Kitchen area as needed., • Perform other duties as assigned Competencies (skills, knowledge and abilities) • 18 years or older • Ability to read, write, comprehend, follow verbal and written instructions and possess basic mathematical skills Minimum General Requirements • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements • Able to lift up to 50 lbs, • Performing duties while wearing personal protective equipment, • Able to work in noisy environments, • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present Preferred Education and Experience • High School diploma or GED-equivalent, • Bilingual - Spanish Travel Required • N/A Other Duties • As assigned Benefits: BCforward offers all eligible employees a comprehensive benefits package including, but not limited to major medical, HSA, dental, vision, employer-provided group life, voluntary life insurance, short-term disability, long-term disability, and 401k. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Locations US-NY-Rye Job ID 2026-8179 Category Management Minimum Rate USD $270,000.00/Yr. Maximum Rate USD $300,000.00/Yr. Work Location Type Physical The VP-ELS serves as the enterprise executive leader for all laboratory operations across NYBCe and its divisions, with responsibility for multi-state laboratory operations spanning New York, Rhode Island, Delaware, Missouri, Minnesota, Nebraska, and additional jurisdictions as applicable. This role will work cross-functionally to identify growth opportunities, best practices for productivity enhancements, areas for consolidation and streamlining, and drivers for sustainability. He/She is responsible for developing and implementing the strategic plan for the laboratories, including driving innovation, implementing emerging technologies, automating, and developing scalable laboratory solutions, and serving as an expert, advocate, and industry influencer in transfusion medicine and laboratory sciences. This position reports to the Chief Operating Officer for Blood and Laboratory Operations, the Vice President, Enterprise Laboratory Services will function as the top executive leader of Enterprise Laboratory Services and will be responsible for overseeing the day-to-day operations, implementing business plans, managing the department's P&L (including revenue and operating margins), developing budgets and financial plans, and fostering a high-performance, customer-oriented culture. Together with stakeholders in quality, medical, and executive leadership, the VP-ELS will craft a strategy for laboratory testing that delivers on the mission of NYBCe and the needs of its customers. This includes maintaining strong relationships and direct interactions with hospital and laboratory customers to develop and sustain partnerships, address concerns, and ensure service expectations are met. Oversees all NYBCe laboratories. Ensures efficient production, technical excellence, and quality and regulatory-compliant laboratory services to deliver high-quality products and services. • Provide strategic vision and executive leadership for Enterprise Laboratory Operations, developing and executing an integrated, multi-state laboratory strategy that aligns with NYBCe's mission, supports customer needs, drives innovation and operational excellence, and ensures long-term sustainability, quality, and growth., • Provides leadership and guidance to the divisional laboratory leadership staff, fostering a collaborative and innovative work environment and promoting a culture of continuous improvement., • In partnership with NYBCe and Divisions' Senior Leadership, execute comprehensive business, operational, and project support to ensure effective execution of Enterprise Laboratory Operations strategies, including developing enterprise laboratory and informatics roadmaps; identifying process, data, and technology requirements; aligning systems and platforms across laboratories; and defining milestones to achieve optimal operational, financial, and customer outcomes., • Develop and implement a comprehensive strategic plan for the laboratories, aligning with the overall organizational goals, driving innovation within the laboratories, and exploring opportunities for the development or implementation of new technologies and methodologies to enhance testing and manufacturing capabilities and efficiencies., • Working cross-functionally to ensure lab operations, practices, policies, and procedures are in compliance with regulatory and accreditation (FACT, ASHI, AABB) standards while maintaining the highest level of quality and accuracy., • Stays abreast of regulatory changes and industry standards, fostering an environment of compliance with all relevant regulations and guidelines., • In partnership with Quality and Medical, serves as an additional point of accountability for all FDA, CLIA, FACT and state Department of Health inspections, audits, and regulatory engagements across the enterprise., • In partnership with Quality and Medical, supports enterprise-wide inspection readiness and compliance governance program, including internal audits, mock inspections, regulatory training, and risk mitigation activities., • In partnership with Medical, supports educational programs and development of educational materials that establish NYBCe as an expert in testing and laboratory operations., • Develops and executes a cross-functional plan with the enterprise-wide SVP/COO, Blood and Laboratory Operations, and in collaboration with the COO and CFO, to optimize customer engagement and partnerships, including the development and execution of enterprise laboratory pricing strategies that support sustainable growth, financial performance, and customer value., • Develop enterprise-wide KPI metrics to ensure that customer experience, lab operations effectiveness, and efficiencies are benchmarked to industry standards., • Ensures collaboration and commitment between Laboratory Operations and other departments to optimize customer engagement, partnership and exceed customer experience., • Develops and monitors budget, including setting and meeting these targets & identifies cost-saving opportunities and implements efficient processes to maximize financial performance., • Leads enterprise laboratory workforce planning, talent development, succession planning, and leadership development to ensure long-term organizational capability and bench strength. Lead quality management initiatives by crafting, articulating, and implementing a vision that embraces high quality standards for products and services., • Drives engagement to create a "one" lab mindset motivating staff to do their best to help the organization achieve its objectives., • Makes recommendations for improvements on organizational processes and practices., • Own and ensure enterprise-wide laboratory business continuity and disaster recovery planning, including development, testing, and continuous improvement of plans to maintain uninterrupted operations, regulatory compliance, and customer service during emergencies, system outages, or other disruptive events., • Participates in professional development by attending conferences and seminars and is an active participant in national organizations representing NYBCe as a recognized laboratory and regulatory leader., • Travel domestically up to 25%. Education: • B.S. in Medical Technology or related field., • Advanced degree (MBA, PhD or MD), a plus. Experience: • Fifteen (15) years of blood banking or comprehensive laboratory experience, with five years of progressive leadership experience., • Demonstrated experience leading multi-site, multi-state laboratory operations in highly regulated CLIA and/or cGMP environments., • Direct experience working with the FDA, CLIA, and state Departments of Health., • Proven track record leading regulatory inspections, responding to findings, and successfully developing, implementing, and sustaining CAPA to closure. Licenses / Certification: • NYS Lab Technologist-preferred., • MT (ASCP) certification-preferred. Knowledge: • Strong knowledge of FDA GMP compliance and quality, CLIA and State DOH laboratory requirements., • Strong knowledge of U.S. Food and Drug Administration (FDA) regulations and guidance application to Blood establishments., • Expert-level understanding of regulatory inspection processes, compliance governance, and enforcement risk management., • Previous experience leading NY State Department of Health permitted laboratories subject to CLEP Standards, a plus., • Working knowledge of Collective Bargaining Agreements, a plus. Skills: • Expert skills to interpret Federal, State, Local and international regulations, standards, technical specifications, and professional guidelines as they apply to NYBCe products and services., • High level of interpersonal skills to handle a variety of complex issues and situations. Position requires demonstrated poise, tact, and diplomacy in dealing with a variety of staff up to and including executive leadership., • Cultural competency and the ability to communicate effectively in a culturally sensitive manner with both individuals and groups from diverse backgrounds., • Self-starter while working well in a strong team environment., • Strategic thinking., • Manages ambiguity - Operating effectively, even when things are not certain, or the way forward is not clear., • Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning., • Resilient - Rebounding from setbacks and adversity in difficult situation. Abilities: • Demonstrated operations and process leadership experience across multiple functional areas with a history of successful strategic planning and execution., • Ability to lead in a matrix structure to achieve business goals; demonstrated financial acumen and experience developing and operating a capital budget., • Analytical thinker who can work collaboratively to identify and resolve technical, operational, and organizational challenges., • Visionary mindset with a proven ability to identify and implement innovative solutions., • Proven history attracting and developing talent both within and outside direct team; ability to communicate clearly and effectively to direct and motivate team and others. Any combination of education, training, and experience equivalent to the requirements listed above that has supplied the necessary knowledge, skills, and experience to perform the essential functions of the job. For applicants who will perform this position in New York City or Westchester County, the proposed annual salary is $270,000.00p/yr. to $300,000.00p/yr. For applicants who will perform this position outside of New York City or Westchester County, salary will reflect local market rates and be commensurate with the applicant's skills, job-related knowledge, and experience. Founded in 1964, New York Blood Center Enterprises (NYBCe) has provided more than 60 years of lifesaving research, innovation, and impact. NYBCe is one of the largest nonprofit blood centers, spanning 17+ states and serving 75 million people. NYBCe operates Blood Bank of Delmarva, Community Blood Center of Kansas City, Connecticut Blood Center, Memorial Blood Centers, Nebraska Community Blood Bank, New Jersey Blood Services, New York Blood Center, and Rhode Island Blood Center, delivering one million blood products to 400+ U.S. hospitals annually. NYBCe additionally delivers cellular therapies, specialty pharmacy, and medical services to 200+ research, academic, and biopharmaceutical organizations. NYBCe's Lindsley F. Kimball Research Institute is a leader in hematology and transfusion medicine research, dedicated to the study, prevention, treatment and cure of bloodborne and blood-related diseases. NYBC serves as a vital community lifeline dedicated to helping patients and advancing global public health. To learn more, visit nybc.org. Connect with us on Facebook, X, Instagram, and LinkedIn.

Job Description Daikin Comfort Technologies Distribution, Inc. is seeking a professional, skilled individual for our HVAC CSR/Inside Sales position for our branch operations group located at our Hyannis, MA branch. The CSR/Inside Sales Representative sells the organization’s products and services for prospective and established customers. Whether face to face, on the phone or through email or fax, the CSR handles customers’ needs by finding out what they need, answering questions, creating solutions and ensuring a smooth and quick sales process. Must be knowledgeable of the organization’s policies, procedures, practices, products and services. The CSR/Inside Sales Representative collaborates with Regional Manager or Branch Manager to help drive territory coverage and maintain positive dealer relationships. Why work with us? Benefits are effective on day one for all full-time direct hires. Training programs are available to help guide team members and develop new skills. Growth Opportunities - there are immense opportunities to grow your career. You will be part of a Global Company - our family brands are backed by Daikin Industries, Ltd. Position Responsibilities may include: • Help the Division deliver on its sales including the new business component by helping to maintain accounts through active communication of new product launches, services, supplies and new products sales and or discounts via outbound calls., • Provide excellent customer service via face to face, phone calls and e-mails., • Execute all aspects of the sales function including order processing, purchase orders, payment processing, quotes and delivery dates - ensure accuracy of information being entered to guarantee the correct item(s) are ordered., • Recommend alternate products based on cost, availability or specifications as needed., • Obtain and monitor scheduled shipment dates to ensure timely delivery and expedite as needed. Coordinate with manufacturing, sales, distribution, and vendors regarding shipments., • Generate new and repeat sales by providing product and technical information in a timely manner., • Educate customers about product terminology, features and benefits in order to improve sales and customer satisfaction., • Provide accurate information regarding availability of in-stock items., • Assist customers with warranties and returns., • Collaborate with the Branch Manager to determine best methods to resolve problems to ensure customer satisfaction and adherence to the organization’s policies. Coordinate problem resolution with appropriate departments., • Periodically reach out to customers to determine satisfaction with the organization, products, and services, • Maintain records and prepare reports on sales activities., • Expand knowledge of HVAC products and keep current with latest trends within the industry, • Work positively with all levels of management and peers to ensure all areas and departments are kept up to speed and are working as an effective team to deliver the highest level of service possible., • Understand and follow work instructions, operating procedures, and company policies., • Participate in additional projects/activities to support ongoing business needs. Nature & Scope: • Works within well-defined instructions, • Uses established procedures and works under supervision to perform assigned tasks, • Work is closely supervised Knowledge & Skills: • Knowledge of HVAC equipment/products is preferred, • General Microsoft Office skills (Outlook, Excel, Word) as well as working knowledge of data base applications, • Effective and high-quality Customer Service/Relationship management skills via walk-ins, phone, and email;, • Positive, professional attitude, handling difficult customers with ability to diffuse negative situations, • Good phone etiquette and e-mail etiquette, • Ability to deal with high-volume customer traffic, • Effective verbal skills – must be able to explain fairly technical parts of information clearly, • Written skills – must be able to effectively & timely communicate via e-mail with customers & accurately input orders, • Effective organizational skills and time management skills including ability to prioritize and multi-task, • High level of attention to detail and accuracy, • Ability to establish positive working relationships with internal and external customers and employees, • Ability to use good judgment and strong work ethics and integrity on the job, • Ability to understand and follow procedures, work instructions, and company policies Experience: • 1 – 3 years of progressive sales experience Education/Certification: • High School diploma or GED equivalent, some colleges preferred People Management: No Physical Requirements / Work Environment: • Must be able to perform essential responsibilities with or without reasonable accommodations Reports To: • Branch Manager / Supervisor, Customer Service Pay Range: • $19-24 Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job Description BCforward is currently seeking a highly motivated Forklift Operator / Production Associate for an opportunity at Hicksville, NY 11801! Position Title: Forklift Operator / Production Associate Location: Hicksville, NY 11801 Anticipated Start Date: ASAP Please note this is the target date and it is subject to change. BCforward will send official notice ahead of a confirmed start date. Expected Duration: 2+ Months with the possibility of extension Job Type: Onsite Pay Range: $18.00/hr.- $19.00/hr. Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Job Description: Summary / Objective Production Associate is responsible for taking direction from the supervisor in order to meet production demands while ensuring quality and safety standards are met. Percentage of Job/ Essential Job Functions • • Self-Reliant and able to accurately work under limited supervision, • Attending area of transfer from filler to chiller., • Inform Supervisors and or Lead of any discrepancy on product information., • Transferring carts of production in and out of chillers and placing them orderly at the WIP area., • Orient product alignment in the Garvey table area, • Flip trays in chillers when needed., • Reworking product that is below specifications., • Keeping work area clean and organized, following the 5 S program., • Promoting a safe work environment at all times., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations., • Other duties, as assigned including transferring to Kitchen area as needed., • Perform other duties as assigned Competencies (skills, knowledge and abilities) • 18 years or older • Ability to read, write, comprehend, follow verbal and written instructions and possess basic mathematical skills Minimum General Requirements • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements • Able to lift up to 50 lbs, • Performing duties while wearing personal protective equipment, • Able to work in noisy environments, • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present Preferred Education and Experience • High School diploma or GED-equivalent, • Bilingual - Spanish Travel Required • N/A Other Duties • As assigned Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Gadge USA was established in 1993. Our company is a national corrugate, paperboard, and flexible packaging distribution and supply-chain solutions company with an expansive distribution network. We manage packaging portfolios across multiple categories, combined with a scalable service model, which delivers packaging solutions and continuous improvement to our customers. We are currently recruiting a Quality Manager. In this role, you will be responsible for leading the execution and continuous improvement of Gadge’s Quality Operations. You will oversee quality concern management, sample inspection programs, vendor quality performance, and regulatory compliance while partnering cross-functionally to enhance product quality, customer satisfaction, and operational efficiency. Requirements What You Will Do: Quality Operations & Issue Management • Responsible for overall CAPA process for any quality and service non-conformances., • Own and manage the end-to-end Quality Concern (QC) process, including intake, vendor communication, escalation, root cause analysis, corrective actions, and final resolution., • Ensure timely closure of QCs, including credit management and disposition of goods, while maintaining accurate system data., • Draft and approve QC documentation, including customer-facing conclusion reports., • Per our KPI, establish and monitor time to close and resolve QCs. Sample Inspection & Product Quality • Perform first article inspection for new items, first production runs, and post-QC validation samples including hands on evaluation of product, • Ensure adherence to specifications including dimensions, substrate, print quality, and functional performance., • Develop and maintain sample archiving and benchmarking standards. Vendor Communication • Regular interaction with Quality Resources at manufacturing partners to work through and support the efficient closure of all CAPA complaints Reporting & Analytics • Own and enhance recurring reports including QC reports and credit tracking., • Analyze quality data to identify trends and improvement opportunities. Regulatory & Compliance • Lead preparation and execution of FSC audits and other regulatory requirements., • Manage customer-driven compliance requests., • Complete customer sustainability RFI's Process Improvement • Develop and improve Quality SOPs and processes., • Lead cross-functional initiatives to enhance quality and efficiency. Training & Collaboration • Train internal teams on quality processes and systems., • Partner cross-functionally to prevent quality issues., • Quality Certifications Must-Haves: • Bachelor’s degree in Supply Chain, Engineering, Quality, or related field., • Ability to read CAD drawings and use measuring devices., • 7–10 years of experience in quality, packaging, manufacturing, or supply chain., • Experience with corrugated packaging or paperboard., • Strong experience in root cause analysis and CAPA., • Experience working with vendors or manufacturers., • Strong analytical and communication skills., • Experience working with third-party manufacturing facilities and meeting quality standards. We Like People Who: • Are passionate about “raising the bar” to produce high-quality work and deliverables., • Have a growth mindset, with a thirst for continuous improvement and development., • Thrive in a collaborative team environment, and open to hearing suggestions and feedback., • Have empathy and seek to understand others’ perspectives to build strong relationships. Benefits What We Offer: • A competitive salary, including annual discretionary cash bonus., • Your health is important! We offer excellent healthcare (medical, dental, vision) benefits with national providers, short-term and long-term disability insurance, life insurance, employee assistance programs, and mental health support programs., • We provide paid time off including company paid holidays., • We care about your future and offer 401(k) retirement plan, employer match, and a discretionary non-elective profit-sharing program. Additional Information: Come “en-Gadge” with us and join our innovative, collaborative, and inclusive teams on our journey to Be the best-in-class choice For All Things Packaging®, while fulfilling our Mission: Always Packed with Commitment® to provide a great customer experience, deliver high-quality, custom packaging products and value-added supply chain solutions through a culture of teamwork, strong relationships, and a commitment to excellence. Learn more about us here. This role will be based in our office located at 3000 Marcus Avenue, Suite 3E03, Lake Success, NY 11042. The salary range for this role is $90,000 - $110,000 commensurate with the candidate's experience. Gadge USA, Inc. is a proud equal opportunity employer. All qualified applicants will be considered without regard to race, color, creed, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, marital status, veteran status, or any other category protected by law.

Job DescriptionJob Title: Production Associate Pay Rate: $18.00 per hour Shift: Monday - Friday, 5:00 AM - 3:30 PM (Shift schedules may include weekends based on business needs) Transportation Requirement: Reliable transportation is essential. Safety Requirements: Steel-toed shoes are required. Composite safety shoe covers may be provided if needed. Job Summary: The Production Associate will work under the guidance of supervisors to meet production demands while adhering to quality and safety standards. This role requires self-reliance and the ability to work accurately with limited supervision. Essential Job Functions: • Efficiently transfer product between filler and chiller stations., • Communicate any discrepancies in product information to supervisors or leads., • Manage the transportation of production carts in and out of chillers, ensuring orderly placement in the Work In Progress (WIP) area., • Align products correctly on the Garvey table., • Flip trays in chillers as required., • Rework products that do not meet specifications., • Maintain a clean and organized work area, following the "5S" program., • Promote a safe work environment at all times., • Adhere to HACCP principles and Good Manufacturing Practices; comply with food and personal safety procedures, as well as company policies and regulations., • Perform additional duties as assigned, including assistance in the Kitchen area as needed. Competencies: • Must be 18 years or older., • Ability to read, write, comprehend, and follow verbal and written instructions; basic mathematical skills required. Physical Requirements: • Frequent movement including walking, standing, bending, stooping, turning, twisting, pushing, pulling, raising arms, lifting, and climbing., • Ability to lift up to 50 lbs., • Perform tasks while wearing personal protective equipment (PPE)., • Work effectively in noisy environments., • Adapt to varying temperature zones, including cold and hot environments for extended periods, and work in areas where dust may be present. Preferred Education and Experience: • High school diploma or GED equivalent., • Bilingual in Spanish is a plus. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Job Summary: The Custom Project Manager is an integral part of the Sales Support Team. This self-driven individual leads in Project Management for custom products; defines project objectives for the product, creates and maintains project timelines, creates and maintains sales support deliverables as well as reports on status to meet delivery goals while providing high level customer support. The Custom Project Manager executes the process through swift, sound and complex decision making; following standards and recommending improved policy and procedure while leading projects of Custom Product and escalated standard projects. This role coordinates cross functionally with Inside Sales, Purchasing, R&D, our global manufacturing offices and Order Processing as well as works externally with Outside Sales Reps, Customers, Specifiers, and Contractors. Major Duties and Responsibilities: • Manage projects for Custom Product and escalated orders from order entry through shipping to meet on time delivery performance., • Maintain the Custom Product project schedule via Monday as well as our internal project task platforms with accurate data., • Create sales support documentation including, deposits, waivers, quotation revisions and release of production information to maintain the project schedule. Ensure accurate documentation., • Able to create, update and maintain quotations within SAP and our HubSpot CRM., • Process Quote Reviews in a timely and accurate manner., • Ensure the accuracy of Rep Sales and Commission credits., • Answer elevated Customer and Rep inquires in an accurate, timely, efficient and courteous manner., • Supply air freight quotations to customers as needed., • Work closely with our global factories to maintain bills of materials and routing schedules and resolve technical issues with our overseas engineering group., • Work cross functionally to review and resolve engineering issues during product development., • Review and redline technical engineering drawings to reflect updates prior to sending to the customer., • Allocate and optimize resources in coordination with global factories and budget to meet project goals. Facilitate communication, resolve conflicts and motivate team members. Identify potential risks, develop mitigation strategies and implement contingency plans., • Execute swift judgement and decision-making practices based on the best available information., • Continuously maintain a high level of product knowledge to proactively recognize and avoid project issues., • Work across departments in order to resolve rep or customer issues concerning project lead times, pricing, and competition., • Perform root cause analysis of complications on projects or company procedures and suggest short and long-term resolution with implementation. Critical Success Factors: • Maintaining on time delivery of accurate delivery of product., • Provide prompt updates to external and internal users based on customer need., • Support and implement initiatives to reduce lead time of deliverables to clients. Requirements: • 5-10+ Years of experience in the management of projects or products of manufactured items., • Bachelor’s degree in business management or related field related to manufacturing., • Excellent communication both verbal and written, time management, managing projects, reporting and organizational skills., • Proficient in project management software., • Attention to detail in composing materials, establishing priorities and meeting deadlines., • Ability to work in a fast-paced environment with demonstrated ability to manage multiple competing tasks/demands and get results., • Must have the ability to learn new skills and facilitate training., • Must be capable of problem solving and independently making decisions based on financial and technical requirements., • Must be capable of managing relationships with a focus on long term partnerships., • Must be a team player capable of coordinating and communicating with multiple departments., • Proficient with Microsoft Suite (particularly Excel, Word, PowerPoint and Teams)., • Ability and willingness for U.S and international travel based on business need., • Knowledge of SAP, HubSpot, ZenDesk, Monday a plus., • Basic electrical knowledge with knowledge of manufacturing/industrial design a plus., • Mandarin speaking a plus We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, submit your resume as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job Description The Import/Export Specialist is responsible for coordinating international shipments and ensuring compliance with global trade regulations for wireless and IoT device configuration operations. This role manages import/export documentation, customs compliance, device shipping logistics, and coordination with carriers, freight forwarders, customs brokers, and internal operational teams. The specialist supports the movement of configured wireless devices, SIM-enabled equipment, accessories, and related materials across global markets while ensuring accuracy, efficiency, and compliance with applicable trade and regulatory requirements. CORE ACCOUNTABILITIES Import/Export Operations • Coordinate domestic and international shipments of wireless and IoT devices, components, SIM cards, and accessories • Prepare and review shipping documentation including commercial invoices, packing lists, bills of lading, certificates of origin, and customs declarations • Ensure import/export compliance with U.S. and international trade regulations, customs requirements, and company policies • Coordinate with freight forwarders, customs brokers, carriers, and warehouse partners to ensure timely shipment delivery and customs clearance • Monitor shipment status, proactively resolve delays, and communicate updates to internal stakeholders and customers • Manage Harmonized Tariff Schedule (HTS) classifications and maintain accurate import/export records, • Support temporary imports, returns, repairs, and international device replacement logistics as needed, • Ensure proper labeling, serialization, and export documentation for configured wireless devices Wireless Device Configuration Support • Collaborate with Operations and Device Configuration teams to align shipping schedules with production and customer delivery timelines • Verify shipment accuracy for configured devices, customer-specific configurations, and serialized inventory, • Support global deployment projects and customer onboarding activities, • Coordinate international movement of test devices, demo equipment, and engineering samples Compliance & Quality Responsibilities • Maintain compliance with trade regulations, export controls, sanctions programs, and customs requirements, • Assist with audits related to import/export compliance, shipping records, and operational processes, • Maintain accurate documentation and records retention in accordance with company and regulatory requirements, • Support continuous improvement initiatives related to shipping accuracy, cost reduction, and operational efficiency, • Participate in root cause analysis and corrective actions for shipment discrepancies or compliance issues QUALIFICATIONS Required Qualifications -Associate’s or Bachelor’s degree in Supply Chain, International Business, Logistics, Business Administration, or related field preferred -2–5 years of experience in import/export operations, logistics, supply chain, or international shipping -Experience supporting electronics, wireless devices, IoT hardware, or technical products preferred -Knowledge of international shipping documentation, customs procedures, Incoterms, and HTS classifications -Familiarity with export compliance regulations and trade documentation requirements -Strong organizational skills and attention to detail -Ability to manage multiple priorities in a fast-paced operational environment -Proficiency with Microsoft Office Suite, particularly Excel Preferred Qualifications -Experience working with freight forwarders, customs brokers, and global carriers -Knowledge of wireless devices, SIM provisioning, or electronics manufacturing environments -Experience with ERP, WMS, or logistics management systems -Certified Customs Specialist (CCS) or related trade certification preferred -Familiarity with ISO quality systems or regulated operational environments Key Skills -International logistics coordination -Regulatory compliance -Attention to detail -Problem-solving -Communication and collaboration -Process improvement -Time management -Customer focus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Office, warehouse, or device operations environment -Frequent coordination with global suppliers, logistics providers, and internal operations teams -Fast-paced environment supporting customer delivery timelines and international shipments -May require occasional after-hours support for international shipment issues or deadlines WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Sr. Manager, IoTMS Operations leads all operational activities within KORE’s Westbury, NY IoT device configuration and production facility, overseeing production, quality, inventory, logistics, engineering coordination, and continuous improvement initiatives. This role is responsible for ensuring efficient, scalable, and customer-focused operations that deliver high-quality configured IoT devices on time and within budget. The Sr. Manager, IoTMS Operations drives operational excellence across device staging, firmware loading, provisioning, testing, kitting, packaging, and fulfillment processes while supporting rapid growth, evolving customer requirements, and technology integration. CORE ACCOUNTABILITIES Operational Leadership • Direct and oversee daily operations of the IoT device configuration and fulfillment facility., • Develop operational strategies to improve efficiency, scalability, quality, and profitability., • Establish and monitor operational KPIs, productivity goals, and service-level agreements (SLAs)., • Ensure production schedules and customer delivery commitments are consistently met., • Lead cross-functional coordination between operations, engineering, sales, procurement, customer success, and quality teams. Production & Configuration Management • Oversee all device configuration processes, including:, • Firmware loading and validation, • Device provisioning and activation, • SIM management, • Network and connectivity testing, • Customer-specific software/application configuration, • Serialization and asset tracking, • Optimize production workflows for throughput, accuracy, and traceability., • Implement scalable operational processes to support increasing order volumes and product diversity., • Ensure proper staffing, scheduling, and resource allocation across production operations. Quality & Compliance • Ensure adherence to quality standards and customer specifications throughout the production lifecycle., • Oversee quality assurance programs, inspection processes, and corrective action procedures., • Support compliance with:, • ISO 9001 or related quality systems, • ESD handling procedures, • Customer contractual requirements, • Regulatory and safety standards, • Review operational metrics and customer feedback to drive continuous quality improvement. Supply Chain & Inventory Oversight • Manage inventory control processes for devices, accessories, SIM cards, and production materials., • Coordinate with procurement and suppliers to maintain material availability and reduce shortages., • Improve inventory accuracy, warehouse organization, and material flow efficiency., • Oversee shipping, receiving, and fulfillment operations to ensure accurate and timely delivery. Financial & Strategic Management • Develop and manage operational budgets, labor planning, and cost-control initiatives., • Analyze operational performance data to identify trends, risks, and opportunities., • Support executive leadership with forecasting, capacity planning, and strategic growth initiatives., • Evaluate and implement automation technologies, software systems, and operational tools to improve scalability. Team Leadership & Development • Lead, mentor, and develop operations managers, supervisors, quality personnel, and production staff., • Foster a culture of accountability, collaboration, safety, and continuous improvement., • Establish training programs and operational standards for production teams., • Conduct performance reviews and succession planning for operational leadership roles. Process Improvement & Technology Integration • Lead Lean Manufacturing, Six Sigma, or continuous improvement initiatives., • Identify operational bottlenecks and implement process optimization strategies., • Collaborate with engineering and IT teams on: -MES/ERP system improvements -Automation initiatives -Production data collection -Traceability systems • Standardize workflows and documentation across production operations. QUALIFICATIONS Required Qualifications • Bachelor’s degree in Operations Management, Supply Chain, Manufacturing, Business Administration, or related field., • 7–10+ years of operations leadership experience in manufacturing, electronics, technology, or IoT environments., • Experience managing production operations with customer-specific configuration or assembly processes., • Strong knowledge of manufacturing operations, quality systems, and supply chain management., • Experience leading cross-functional operational teams in a fast-paced environment., • Proven track record of improving operational efficiency and scalability. Preferred Qualifications • Experience in IoT device manufacturing, device provisioning, telecommunications, or electronics configuration services., • Knowledge of: -Firmware deployment processes -Device lifecycle management -Cellular/network-connected devices -Serialization and traceability systems • Experience with ERP, MES, WMS, or production management systems., • Lean Manufacturing or Six Sigma certification preferred., • MBA or advanced operations/engineering degree is a plus. Key Skills -Operational strategy -Production management -Supply chain oversight -Quality systems management -Leadership and team development -Process optimization -Budget management -Data analysis and KPI management -Customer operations support -Continuous improvement -Change management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Combination of office, warehouse, and production floor environments. -Frequent interaction with production staff, customers, suppliers, and executive leadership. -May require occasional travel to customer sites, suppliers, or partner facilities. -Fast-paced operational environment with evolving customer requirements and production priorities. WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Estimator generates proposals that meet customer's specifications and other requirements, and prepares the final budget for the project, product, or service. This is accomplished through collaboration with Engineers, the Sales Team, and other related departments. Essential Job Responsibilities not limited to: Estimating • Review blueprints and make decisions on product that meets project specifications, code requirements, and any special project criteria, • Use established pricing schedules to prepare and accurately generate proposals that comply with plans, specifications, and any special project criteria provided by the Sales Reps, • Use discretion with respect to product selection to achieve customer specifications and achieving the company’s profitability, • Accurately communicate to the customer the scope of the proposal and any special deviations as it relates to the plans and specifications through generation of a scope document, • Prepare and submit the final proposal to the customer for each project using VMC’s products or services within stated timeframes Sales Support • Communicate effectively with the relevant departments to achieve objectives, which involves use of in-depth product knowledge and product application experience, • Escalate customer concerns effectively, • Accurately maintain the key project information and total scope of work in all sales proposal templates, sales estimating tools, and sales quote log, • Develop and accurately maintain all data in required sales trackers, • Support customer sales through service, education, and effective problem-solving, • Support strategic sales plan Requirements Minimum Qualifications: • Bachelor’s Degree in Engineering is a plus, • 2 years commercial construction Experience, • 2 years project management experience with a contractor is preferred., • 1 year Estimating experience with an HVAC equipment dealer, • Strong team player with excellent people and communications skills, • Proven ability to read plan drawings and blueprints, • Excellent math skills, ability to apply concepts of basic geometry, • Strong attention to detail, resourceful, self-starter and a problem solver, • Demonstrated excellence in organization and time management skills, • Exceptional customer service skills, positive and upbeat attitude, • Strong team player with excellent people and communication skills, • Must be able to travel maximum of 5% if needed, • Sales Experience is a plus ------------------------------------------------------------------ At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Company DescriptionFor over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products. Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

Job Description The IoTMS Technician III is responsible for the configuration and troubleshooting of technology devices and onboarding of new products and offerings. This role involves programming devices to ensure optimal performance, conducting tests to verify functionality, and kitting and packing devices for shipment. The technician collaborates with stakeholders such as the engineering and quality teams to enhance device configuration efficiency and accuracy while maintaining thorough documentation of adherence to all processes. ESSENTIAL FUNCTIONS Financial • Ensure cost-effective testing, configuration, imaging, kitting, packing processes for shipment of customer orders., • Optimize refurbishing and/or repair of wireless devices, using inventory and time efficiently. Customer • Configure wireless communication devices and other related hardware quickly and accurately., • Ensure optimal performance by adjusting settings and performing necessary calibrations., • Complete accurate shipment of orders for delivery on time. Business Process • Streamline device return, configuration, and order preparation processes., • Follow documented procedures for device testing, repair, refurbishing, imaging and configuration., • Collaborate with team members and stakeholders to share best practices and troubleshoot complex issues., • Provide Technical process support and training to Production personnel, • Maintain knowledge on OEM specific HW, Connectivity, and applicable Platforms, • Conduct Production Feasibility Assessment., • Provide time studies pertaining to Production processes., • Support process improvement initiatives and activities., • Provide engineering support to determine root cause and implement corrective actions on internal and customer related manufacturing problems. • Troubleshoot technical/process issues. Learning and Development • Engage in continuous personal development by seeking feedback and participating in training opportunities., • Mentor junior technicians and contribute to team knowledge-sharing and training sessions to improve collective skills and foster a culture of continuous learning and improvement. QUALIFICATIONS • High School Diploma, GED, or equivalent., • 3+ years’ experience in a technical and/or manufacturing role preferred., • Experience writing, testing, or debugging software., • Experience with electrical, mechanical, and computer hardware., • Experience working in an ISO (9001 & 13485) environment., • Ability to read and analyze information and data and perform basic math., • Proficient using Microsoft Office applications., • Experience providing technical customer service, such as tech support and/or installation/repair service preferred. SKILLS/COMPETENCIES • Strong communication skills, both verbal and written, with a customer-centric approach., • Proficiency in problem-solving and critical thinking., • Ability to work independently and as part of a team., • Ability to multi-task and contribute Kore Values Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to remain stationary; move; lift and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. “KORE Wireless Group, Inc. is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.”

Job Description Gadge USA was established in 1993. Our company is a national packaging supply and supply-chain solutions company with an expansive distribution network. We manage packaging portfolios across multiple categories, combined with a scalable service model, which delivers packaging solutions and continuous improvement to our customers. We are currently recruiting a Senior Creative & Technical Services Specialist. In this role, you will oversee the development and management of packaging specifications, review and validate samples against specifications, and support structural design and artwork approval processes. This role partners closely with Sales, our Account Managers, our Project teams, and external vendors to ensure customer requirements are translated into accurate, timely, and high-quality deliverables. Additionally, you will provide technical expertise, support product development, and work cross functionally to contribute to process improvements that enhance efficiency, consistency, and overall customer experience. Requirements Core Responsibilities and Skills: • Assemble and prepare graphics for packaging., • Knowledge of Adobe Creative Suite, Adobe Illustrator, Photoshop and inDesign., • Knowledge of pre-flighting and file preparation for print production of various substrates and formats., • Ability to visualize 2D cad drawings to be utilized for packaging., • Create physical mock-ups for visual presentations., • Consistently act as a key design and technical point of contact with both internal and external customers through open and ongoing communications., • Source and negotiate for printing plates and cutting dies., • Ability to measure packaging samples and review as per specifications., • Work alongside and support the Director of Creative & Technical Services. Qualifications • Bachelor’s degree in graphic design, Packaging Design, or related field., • Minimum of 3-5 years of relevant experience in prepress and art file preparation. Preferably in packaging design or other related programs., • Expertise in Adobe Creative Suite. Illustrator, PhotoShop and InDesign preferred., • Experience in various packaging types, materials, and production methods., • Knowledge of Artios CAD and Cape Pack a plus., • Knowledge of and understanding of flexographic and offset printing processes., • Critical thinking and ability to take abstract ideas and concepts and develop them into print production ready art files., • Project management skills to identify, coordinate, communicate, schedule and determine resources for each project and customer activity., • Comfortable working with tooling manufacturing vendors for price negotiations, and timelines., • During the recruitment process we will request a portfolio showcasing a range of packaging and their application to physical products. We Like People Who: • Are passionate about “raising the bar” to produce high-quality work and deliverables., • Have a growth mindset, with a thirst for continuous improvement and development., • Thrive in a collaborative team environment, and open to hearing suggestions and feedback., • Have empathy and seek to understand others’ perspectives to build strong relationships. Benefits What We Offer: • A competitive salary, including annual discretionary cash bonus., • Your health is important! We offer excellent healthcare (medical, dental, vision) benefits with national providers, short-term and long-term disability insurance, life insurance, employee assistance programs, and mental health support programs., • We provide paid time off including company paid holidays., • We care about your future and offer 401(k) retirement plan, employer match, and a discretionary non-elective profit-sharing program. Additional Information: Come “en-Gadge” with us and join our innovative, collaborative, and inclusive teams on our journey to Be the best-in-class choice For All Things Packaging®, while fulfilling our Mission: Always Packed with Commitment® to provide a great customer experience, deliver high-quality, custom packaging products and value-added supply chain solutions through a culture of teamwork, strong relationships, and a commitment to excellence. Learn more about us here. This role will be based in our office located at 3000 Marcus Avenue, Suite 3E03, Lake Success, NY 11042. The salary range for this role is $70,000 – 90,000 commensurate with the candidate's experience. Gadge USA, Inc. is a proud equal opportunity employer. All qualified applicants will be considered without regard to race, color, creed, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, marital status, veteran status, or any other category protected by law.

Deliver a Best in Class Customer Experience.

Deliver a Best in Class Customer Experience.