Business engineer jobs in Medford, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 5-10 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description *Candidates must be currently authorized to work in the United States on a full-time, permanent basis. StaffRight Associates and our clients do not provide visa sponsorship for this position. The Opportunity StaffRight Associates is seeking a visionary Senior RF Engineer to spearhead the development of next-generation wireless communication systems. This is a high-impact leadership role where you will bridge the gap between theoretical RF physics and scalable product reality. As a key technical authority, you will drive the architectural integrity of sophisticated RFID and wireless solutions, influencing the entire technology roadmap of a market leader in high-precision electronics. This position is ideal for a technical synthesizer who thrives on solving multi-dimensional engineering challenges within a fast-paced, innovation-centric environment. What You’ll Do • Architect end-to-end RF transceiver systems, ensuring seamless integration of transmitter and receiver chains into complex hardware ecosystems., • Synthesize technical requirements for sophisticated RF initiatives, providing the foundational blueprint for cross-functional engineering teams., • Design robust power delivery networks and ancillary circuitry critical to the performance of high-frequency hardware., • Execute comprehensive product lifecycles, from component selection and rapid prototyping to factory deployment and rigorous bench-top validation., • Champion root-cause analysis and debugging efforts to resolve intricate RF interference and performance bottlenecks., • Collaborate with global manufacturing partners and internal stakeholders to transform conceptual designs into market-ready RFID innovations., • Navigate EMI/EMC regulatory landscapes by spearheading troubleshooting and validation protocols to ensure global compliance., • Lead the evolution of the technical roadmap, leveraging deep domain expertise to mentor junior staff and influence multi-disciplinary program strategies., • Cultivate strategic partnerships across organizational lines and with external entities to align technical execution with overarching business objectives. What You Bring • Academic Excellence: A Bachelor’s degree in Electrical Engineering or a related field with at least 5 years of professional experience, or a Master’s degree with over 4 years of advanced research and design exposure., • Board-Level Mastery: Proven track record in board-level RF circuit design, including precision tuning, impedance matching, and sophisticated troubleshooting., • Antenna Expertise: Demonstrated capability in antenna architecture, modeling, and performance measurement., • Instrumentation Command: Expert-level proficiency with essential laboratory tools, including Vector Network Analyzers (VNAs), Spectrum Analyzers, High-Speed Oscilloscopes, and RF Power Meters., • Systemic Knowledge: Experience with RF Power Amplifier (PA) design, UWB, and system-level architectures for RFID and wireless protocols., • Advanced Simulation Skills: Familiarity with industry-standard design suites such as ADS, CST, and Cadence., • Protocol Diversity: Familiarity with diverse wireless standards, potentially including WWAN, BLE, Wi-Fi, LoRa, or GPS.Company DescriptionJoining StaffRight Associates When you partner with StaffRight Associates in your search for your next role, you’re doing more than pursuing a job, you’re aligning yourself with a team of experts committed to placing top-tier talent in truly impactful positions. We take pride in fostering professional growth and connecting forward-thinking individuals with organizations that value innovation and excellence. We look forward to showcasing your expertise in a way that resonates with our clients and opens the door to meaningful opportunities.Joining StaffRight Associates\n\nWhen you partner with StaffRight Associates in your search for your next role, you’re doing more than pursuing a job, you’re aligning yourself with a team of experts committed to placing top-tier talent in truly impactful positions.\n\nWe take pride in fostering professional growth and connecting forward-thinking individuals with organizations that value innovation and excellence. We look forward to showcasing your expertise in a way that resonates with our clients and opens the door to meaningful opportunities.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $180,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Job Summary East/West is seeking a highly motivated and dedicated Quality Engineer to join our team. We are open to candidates of all skill levels. As a Quality Engineer, you will be responsible for ensuring the highest level of quality of our products. You will work closely with cross-functional teams to identify and resolve quality issues, establish and implement quality standards, and continuously improve our quality management system. Essential Functions • Drive product nonconformance issues to closure via a zero-defect mindset and attitude., • Form and lead ad-hoc project teams in support of various business needs., • Develop, implement, and maintain quality control processes and procedures to ensure compliance with military, regulatory, and customer standards., • Lead root cause analysis and investigations of non-conforming material via utilization of standard root cause and corrective action processes to contain, disposition, and implement corrective and preventive actions., • Review and analyze defect data to identify trends and develop and initiate improvement strategies and tactics., • Collaborate with design and production teams to ensure that quality assurance considerations are incorporated into the design and manufacturing processes., • Works with Design and Manufacturing Engineering staff to support the planning of the manufacturing process for new product introduction using APQP., • Use analytical techniques to identify problems and create solutions., • Reviews shop work instruction templates to ensure conformity and accuracy in the production process, including verification points., • Develop and review quality standards, methods, work instructions, and procedures for the inspection and compliance of manufactured and procured products. Qualifications/Minimum requirements • Undergraduate degree in an Engineering field (Mechanical preferred) or 5+ years requisite experience., • Minimum of 2+ years of experience in quality engineering, aerospace or military manufacturing industry preferred., • Knowledge of quality management systems, standards, and methodologies, such as ISO 9001, AS9100, and Six Sigma preferred., • Knowledge of APQP tools a plus (PFMEA, MSA, Control Plan, Process Flow Diagram)., • Experience with Quality Engineering tools such as Root Cause Analysis, Mistake Proofing, statistical sampling as well as Project Management skills a plus., • Knowledge of GD&T (Geometric Dimensioning & Tolerance) preferred., • Ability to approve production sequences according to the company's quality standards., • Ability to read, interpret, and approve complex engineering drawings and blueprints., • Knowledge of ERP system preferred., • Strong problem-solving and analytical skills., • Excellent communication and interpersonal skills., • Self-starter., • Proficiency in Microsoft Office applications., • Able to stand, walk, bend, and lift 50 lbs., • U.S. Citizenship Required. Open to all skill levels. Level and salary will be determined by the candidate's experience and qualifications. East/West offers a generous benefits package, including but not limited to: • Medical, Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance, • 9/80 work schedule (Every other Friday off) Job Title: Quality Engineer FLSA Classification: Exempt Job Type: Full time EOE / Disability / Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role is $100,000 to $140,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The QA Engineer, Sr plays a key role in driving product excellence and customer satisfaction by leading quality initiatives and resolving complex challenges. This includes collaboration with cross-functional teams, suppliers, and customers while shaping best practices in compliance, testing, and inspections. The Senior QA Engineer also mentors junior team members and have the opportunity to influence quality strategy across the organization. Key Position Accountabilities: • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products., • Establish and maintain quality planning procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties., • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, cross-functional teams and communication with suppliers and customers., • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating to appropriate parties., • Perform internal audits of department processes and procedures., • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing of failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness., • Review specification control drawings and generate quality plans (PAP, PPAP)., • Assist Incoming Inspection with material disposition and Material Review Reports., • Review/approve engineering change notices, manufacturing processes, and SOP’s to insure compliance and up-to-date., • Plan, monitor and track product qualification testing per customer specifications or DDC’s internal procedures., • Contribute technical input, as well as material and labor cost estimates in support of tactical business opportunities and proposals., • Perform Source Inspection at vendor sites, and support customer Source Inspection at DDC, as needed., • Travel <10%, • Provide training, mentorship, and coaching to junior members of the Quality Assurance team to ensure their continuous development and alignment with company quality standards, processes, and best practices. Qualifications: • Bachelor’s degree in appropriate Engineering, Industrial Engineering, Mathematics/Statistics, or Applied Sciences is desired. Six Sigma knowledge a plus., • Minimum 7 years related Quality Assurance Engineering experience., • Knowledge of quality, military, and industry standards AS9100, MIL-PRF-38534, MIL-STD-883, and/or IPC-A-610 desired., • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms., • Demonstrated ability to develop excellent working relationships with management, customers, and vendors., • Excellent project and time management skills. Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Are you ready to join an award-winning MSP recognized as one of the best places to work on Long Island? Techworks Consulting is seeking a talented and driven Senior Sales Engineer to support both new sales and account management teams in designing solutions, scoping projects, developing proposals, and ensuring technical accuracy throughout the sales process. This is an ideal opportunity for someone who thrives in a dynamic, hands-on environment and wants to play a major role in shaping the solutions we bring to market. We'll Provide • Competitive salary range of $90,000 to $100,000, • Robust benefits package including: Health insurance, Dental, 401(k), PTO, and paid holidays, • Opportunities for continued growth and learning, • Great company culture supported by strong core values, • Direct exposure to leading vendors including Microsoft, Fortinet, Lenovo, and more What You'll Do • Create client proposals, statements of work, project scopes, and bills of materials, • Design practical, scalable IT solutions for small and mid-sized business clients, • Present technical recommendations in a client-friendly, business-focused manner, • Participate in sales calls, account strategy meetings, and planning sessions, • Coordinate with Engineering and Service Delivery leaders to ensure solutions are standardized, profitable, and executable, • Build relationships with vendors such as Microsoft, Fortinet, Lenovo, and distribution partners, • Manage deal registrations, pricing programs, certifications, and vendor opportunities, • Attend vendor and software trainings to become an internal subject matter expert on the solutions we sell, • Help improve recurring revenue opportunities, project quality, and overall solution consistency Skills You'll Need • Technical foundation in Microsoft 365, Azure, networking, cybersecurity, and virtualization, • Experience scoping technical projects, creating SOWs/BOMs, and developing proposals, • Ability to explain complex technology in a clear, easy-to-understand way, • Excellent communication, organization, and documentation skills, • Professional presence with the ability to communicate confidently with executive-level decision makers, • Ability to collaborate across internal teams and bring in additional expertise when needed, • MSP experience strongly preferred, • Commercial awareness around pricing, margin, and solution fit is a plus Why This Role Matters You'll sit at the center of sales, engineering, vendors, and client strategy—helping ensure the right solutions are sold the right way. Your work will directly impact client success, operational excellence, and company growth. Ready to Apply? Quick apply with your resume here OR Get a head start on our application and aptitude testing process here: https://www.ondemandassessment.com/o/JB-3NLQQFV45/landing?u=1182753

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Associate Software Engineer with expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Implement, enhance and maintain robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular & ExtJS., • Build and integrate front-end and back-end components, ensuring performance, responsiveness, and security., • Utilize state-of-the-art AI coding tools, LLMs, and frameworks to accelerate software development, automate testing, and improve code quality., • Collaborate with cross-functional teams including product managers, designers, QA, and DevOps., • Participate in code reviews and contribute to maintaining high standards of code quality and best practices., • Assist in troubleshooting and debugging issues in production and lower environments., • Write unit and integration tests to ensure code quality and reliability., • Contribute to the continuous improvement of software development practices, tools, and processes. Technical Skills: • Experience in .NET (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Proficiency with Angular, JavaScript, HTML5, CSS3, and TypeScript., • Experience in implementing and integrating with REST APIs., • Experience with automated testing frameworks such as xUnit, NUnit, Jasmine. Preferred Qualifications: • Experience in building and maintaining enterprise-grade data-driven web applications using .NET, Angular, other JavaScript frameworks., • Understanding of object-oriented design and software engineering principles., • Experience working in Agile or Scrum development environments., • Experience with AI-Assisted Development tools and techniques Education & Experience: • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Experience: Minimum of 2+ years of professional software development experience, with at least 2 years of experience working as a full-stack engineer in .NET and Angular. Core Competencies: • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members. Salary Range: $80,000 - $90,000 DOE (Depending on experience) Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact hr@campsystems.com. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $90,000- 120,000, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Magnetics Design Engineer is responsible for the design and development of magnetic components, including transformers, inductors, and related assemblies, for high-reliability aerospace and defense applications. This role supports new business development through direct customer engagement, technical presentations, and specification definition, while also driving cost reduction and process improvements for existing products. Key Position Accountabilities: • Ensure implementation of Company safety, health and environmental programs for employees whose work is directed. Ensure that safe work practices are followed and the environment is fully protected in accordance with Company policy and governmental regulations., • Commitment to the Company’s policies, principles, and procedures and adheres to the Company’s procedures including Environmental, Health and Safety (EH&S), Equal Employment Opportunity (“EEO”), discipline/corrective action, and security., • Designs, tests, and magnetic components.(transformers, inductors, cores, windings.), • Communicates directly with customers to develop product specifications and technical assistance., • Make technical presentations for customers, reps, and sales organization., • Effectively communicates with customers and sales personnel in accurately defining customer requirements., • Supports product manufacturing transition and product maintenance at offshore manufacturing locations., • Uses experience to troubleshoot and resolve process and test issues., • Manages and expedites proto-type builds., • Assists QA Dept. with technical support for internal and external CARs., • Data Analysis., • Ability to analyze, organize and prioritize work while meeting multiple deadlines., • Advanced analytical, evaluative, and objective critical thinking skills., • Proven ability to design magnetic devices., • Knowledge of transformer material suppliers preferred. (cores, bobbins, laminations, cases, wire, etc.) Qualifications: • 2 - 5 years relavent work experience preferred., • Bachelor's Degree Preferred., • Any combination of education, training and experience listed above that demonstrates the ability to perform the duties of the position. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

A leading micromobility company is seeking a Founding Staff Analytics Engineer for their new Lime for Business division. This remote role requires 7+ years in analytics engineering and expertise in Snowflake and dbt. Responsibilities include designing the analytics architecture, collaborating with c

Strategic Business Systems, Inc (SBS) seeks a Senior AWS Data Migration Consultant to lead data migration efforts for their Professional Services team.

Job Description: The main function of a Business Intelligence Engineer is to perform the analysis, design, implementation, modification, and daily functional support of all applications. Job Responsibilities: Works with key stakeholders within all business functions to align technology solutions wit

Business Computers Management Consulting Group Llc is seeking a Senior Database Engineer to support data transformation and migration services remotely. The role requires over 8 years of experience in database engineering, with strong SQL/JDBC skills and proficiency in ServiceNow.

Transport Circuit Migration Engineer (Remote – Logical Grooms Specialist) We are seeking an experienced Transport Circuit Migration Engineer with proven expertise in remote and logical grooms of transport circuits. Bold Business is a US-based global business process outsourcing (BPO) firm with ove

Write clean, efficient, and well-documented code, following best software engineering practices. Background in mentoring or leading small engineering teams. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more.

Work with engineering, risk operations, and data acquisitions to access necessary data, maintain data quality, and support data access Requirements: 6+ years relevant work experience & relevant PhD or 8+ years & relevant Masters Proven track record of solving complex / high profile business proble

Conduct exploratory data analysis to identify trends, patterns, and opportunities for business improvement. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more.

Skills and attributes for success - Respond to client requests and provide consultation to clients to service all client eDiscovery needs - Create fields, choices, layouts, and views in Relativity - Create batches of records for review in Relativity - Create Production sweeps and sets in Relativity

Black Airplane is a digital product agency dedicated to solving complex business problems through innovative technology and design. The Staff Software Engineer at Black Airplane will play a pivotal role in shaping the technical foundation of our clients' products. This individual will contribute sig

We are partnering exclusively with a globally recognized leader in book publishing to identify a seasoned SAP ABAP Software Engineer. EHP7) development within a complex, highly customized environment Support core business processes including OTC, P2P, Payables, and MM/PP Contribute to active SAP BTP

Our hardware and software suite connects cities, law enforcement, businesses, schools, and neighborhoods in a nationwide public‑private safety network. Trusted by over 5,000 communities, 4,500 law enforcement agencies, and 1,000 businesses, Flock delivers real‑time intelligence while prioritizin

Affirm is looking for a Senior Software Engineer for our Cloud Compute team to play a pivotal role in ensuring the robust and scalable foundation of our entire platform. Our mission is to provide a highly reliable and available cloud environment that empowers all of Affirms engineering teams to buil

TDS Telecommunications Corporation is seeking a Lead Software Engineer to join their IT Web & Mobile Application Development team in the United States.

Qualifications:Bachelor’s degree in Information Technology, Computer Science, Business, or a related field. Description:We are seeking a talented and experienced engineer to join our dynamic team. Collaborate with product managers, architects, and other engineers to gather requirements and transla

CaptivateIQ is seeking a Staff Software Engineer to define the technical strategy for its Modeling Platform team in the United States. The ideal candidate will have over 8 years of software engineering experience and a proven record of mentoring and leadership.

Collaborate with engineering, product, design, data and engineering counterparts to execute on cross-functional initiatives. Communicate best practices and platform updates to product engineers. Affirm is seeking a Senior Software Engineer to join the Monetization team under the Direct-To-Consumer o

You will work closely with cross‑functional teams, including product management, design, and other engineering functions, to translate business requirements into technical specifications and deliver high‑quality products that delight our internal and external clients. ABOUT THE ROLE Facility Opt

Lumistry is seeking a Principal Software Engineer to drive technical strategy and lead development on core products for pharmacy care in the U. This role emphasizes building an AI-first engineering culture, involving cross-functional collaboration, scaling technical standards, and ensuring complianc

We're an early-stage company building innovative software solutions with a commitment to shipping rock-solid, reliable, safe software.We’re searching for someone who loves to ensure that software does exactly what it’s supposed to do every time – and when it doesn’t, we know immediately.You

Dew Software is seeking an experienced Full-Stack Developer to design, develop, and maintain applications using Java and modern frontend technologies.The ideal candidate will have over 8 years of experience with a strong focus on Java programming, along with skills in HTML, CSS, and JavaScript frame

Senior Software Engineer (Full Stack) Location : Remote, US (EST preferred) Compensation : $150K – $180K + Equity Who We're Looking For Seeking a Senior Software Engineer with 5+ years of experience in SaaS or cybersecurity startups. Backed by leading investors, they are scaling rapidly and loo

Remote Jobs is seeking a Business System Analyst to join their team remotely.

Trigyn's direct government client has an immediate need for a PM/Business /Data Analyst in New York, NY. TRIGYN IS AN EQUAL OPPORTUNITY EMPLOYER About Trigyn: Trigyn is an IT Services Company that has been in business for 30 years with more than 1,500 resources deployed today. Immediate contract opp

A technology firm is seeking a Data Analyst to join the Business Intelligence team, focusing on transforming complex data into actionable insights.

AI-Augmented Engineering Expectations: You will be expected to leverage AI-Augmented Engineering tools (such as ChatGPT, Gemini, or Claude) to significantly improve productivity. We carefully consider multiple business-related factors when determining compensation, including job-related skills, work

Amplify is seeking a Data Engineer to enhance our data analytics teams across the United States. The ideal candidate has over 8 years of software development experience and a strong background in data engineering and analytics.

What we offer Grow as a professional by working with emerging technologies in a high-demand industry segment Drive company direction at a company that encourages input from all levels to help shape our trajectory Experience working at a technology company in which the mission focus is on tackling on

Ideal candidates should have 8+ years in analytics and data engineering, strong skills in SQL and dbt, and a passion for using AI in analytics workflows. A leading real estate technology firm is seeking a Staff Software Engineer to lead the transformation of their analytics platform.

Artsy is seeking a Senior Data Engineer to join their team in the United States. You will work cross-functionally with data analysts and engineers to enhance the data platform, ensuring reliability and quality.