Trabajos computer engineer en Toms River, New JerseyCrear alertas

Job DescriptionNDI is looking for a Systems Engineer to join our high-impact team within the AAG/EMALS Systems Engineering team. In this role, you will play a critical part in the design, development, integration, and fielding of advanced systems supporting complex naval aviation platforms and technologies. This division is responsible for systems engineering management, planning, analysis, and requirements analysis. You will contribute to the development of aircraft systems, ship integration efforts, and cutting-edge enabling technologies. Your efforts will directly support the execution of the Department of Defense for major weapons systems. The role focuses on ensuring the system meets all requirements, including performance, safety, and compatibility, throughout their entire lifecycle. Pay: $75,000-$100,000 Role and Responsibilities: • Lead and coordinate technical activities to ensure stakeholder needs are translated into effective, lifecycle-optimized systems., • Manage internal and external system interfaces for compatibility and performance., • Conduct system architecture design, component selection, and integration planning to meet all requirements., • Ensure alignment of system design with functional and physical requirements across hardware, software, data, and infrastructure., • Provide expert technical guidance to multidisciplinary teams, including systems, hardware, software, test, cybersecurity, and safety., • Apply extensive knowledge of Systems Engineering for major weapon systems in alignment with the DoD 5000 Acquisition framework., • Support and execute technical reviews and major milestones (SRRs, PDRs, Milestone A, etc.), ensuring technical rigor and compliance with all criteria., • Assist with the development of technical guidance, instructions, and program documentation (white papers, decision memos, technical assessments)., • Collaborate with a multifaceted team of stakeholders (engineering, logistics, manufacturing, program leadership) to solve complex problems with many competing objectives., • Participate in key program activities, including Risk Management, Configuration Management, Trade-off Analysis, Technical Reviews, and Modeling & Simulation., • Experience supporting ACAT I program through all phases of the acquisition lifecycle., • Provide technical oversight and integration guidance to multidisciplinary teams (systems, test, cyber, safety, hardware, software)., • Conduct system architecture design, component selection, integration planning, and technical risk assessments., • Develop and implement risk mitigation strategies to ensure program stability., • Prepare and review required documentation, including technical proposals, engineering reports, drawings, white papers, and status briefings., • Document solutions in relation to technical, cost, and schedule constraints., • Oversee integration, testing, and evaluation of systems and subsystems., • Conduct performance testing and validation analysis to ensure systems meet operational requirements., • Prepare detailed technical documents such as specifications, test plans, and engineering reports., • Interface with stakeholders across program offices, fleet users, contractors, and industry., • Translate complex technical information for senior leadership, including non-technical decision-makers., • Support collaboration between engineering, logistics, test, and acquisition teams., • Provide regular progress reports and presentations to program management and stakeholders. Requirements: • Bachelor’s degree in engineering (Electrical/Computer, Systems, or Industrial Engineering preferred)., • Minimum 5 years of experience in Systems Engineering, preferably within DoD or NAVAIR environments., • Experience with Systems Engineering processes, especially within the DoD 5000 Acquisition Lifecycle., • Strong analytical, critical thinking, and problem-solving abilities., • Ability to work independently and collaboratively within cross-functional teams., • Must be a US citizen and be able to obtain and maintain a Security Clearance.Additional Preferred Experience, • Foreign Military Sales (FMS) Experience, • Proficiency in Microsoft Products (Word, Excel, PowerBi), • Experience in JIRA application, • Experience in process and review Requests for Engineering Investigation (REIs) NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Powered by JazzHR Gy9oGTjqdH

Job Description JOB SUMMARY Specialty Systems, Inc. has an immediate opening for a Lab Engineer to support our Department of Defense customer at Joint Base MDL-Lakehurst. This position will support the development, testing, sustainment, and modernization of the Electromagnetic Aircraft Launch System (EMALS), Advanced Arresting Gear (AAG), and associated Software Support Activity (SSA) laboratory environments. The Lab Engineer will work closely with the Lab Manager, software development teams, systems engineers, cybersecurity personnel, and test organizations to ensure laboratory systems remain technically accurate, operationally available, and capable of supporting developmental testing, fleet support, software integration, and future system enhancements. The ideal candidate will possess a strong systems engineering background with experience in hardware/software integration, test system design, configuration management, and laboratory operations. This position requires the ability to develop new test capabilities, evaluate system changes, and ensure laboratory configurations accurately represent operational environments. This position is located at Joint Base MDL-Lakehurst and supports mission-critical Navy systems used in carrier aviation operations. In this position, you will work one of our customer’s Compressed Work Schedules: • Working four 9 hour days (M-Th) and an 8 hour day (F) for the first week of a cycle followed by four 9 hour days (M-Th) and being off on the second Friday for the second week of a cycle. This results in a 3 day weekend every other week!, • Working 10 hour days (M-Th) every week. This results in a 3-day weekend every week! Responsibilities • Design, develop, integrate, and maintain laboratory test stands, simulators, and specialized test equipment supporting EMALS, AAG, and SSA testing activities., • Engineer laboratory configurations and test setups to support software development, hardware integration, system verification, fleet support, and prototyping efforts., • Serve as the technical authority for laboratory Software Configuration Management (SCM) and Software Quality Assurance (SQA) processes, ensuring accuracy and integrity of all lab baselines., • Evaluate proposed software baseline changes, engineering change proposals, and system updates to determine impacts to laboratory infrastructure, simulators, and test equipment., • Define and implement modifications required to laboratory hardware, software, and test environments to support evolving system capabilities., • Manage laboratory incident reporting, perform root cause analysis of equipment and test anomalies, and track corrective actions to closure., • Maintain inventory, lifecycle status, configuration records, and technical documentation for all laboratory equipment, software, and engineering assets., • Develop, maintain, and control laboratory engineering documentation, including system diagrams, network architectures, interface definitions, and equipment drawings., • Maintain and coordinate schedules for laboratory equipment utilization supporting testing, prototyping, software development, and fleet support activities., • Assist with the specification, evaluation, procurement, installation, and integration of laboratory equipment and engineering tools supporting R&D initiatives., • Interface with System Administrators, ISSOs, and Cybersecurity personnel to ensure laboratory systems remain compliant with accreditation requirements and maintain Authorization to Operate (ATO) status., • Participate in software development reviews, design reviews, technical interchange meetings, and test readiness activities to ensure laboratory capabilities support program objectives. Qualification Requirements: Education, Certifications and Years of Experience: • Bachelor's degree in Electrical Engineering, Computer Engineering, Systems Engineering, Computer Science, or related technical discipline., • Equivalent work experience may be considered in lieu of degree requirements., • Minimum 5 years of experience supporting complex integrated hardware and software systems., • CompTIA Security+ certification (or the ability to obtain this certification within 6 months of hire) is required., • Must have an active clearance at the Secret level with the ability to obtain a clear Single Scope Background Investigation. If no active clearance, must be able to obtain an interim secret level clearance within approximately 4 weeks of submittal of clearance application. Technical: • Strong systems engineering and systems integration experience., • Experience designing, developing, and maintaining laboratory test environments., • Experience with hardware/software integration and troubleshooting., • Knowledge of Configuration Management principles and baseline control processes., • Experience with test equipment including oscilloscopes, data acquisition systems, network analyzers, digital and analog instrumentation, and simulation environments., • Experience supporting software development, software testing, and system integration activities., • Experience developing and maintaining engineering documentation and technical diagrams., • Experience with requirements analysis, impact assessments, and engineering change implementation., • Familiarity with cybersecurity compliance requirements and accreditation processes., • Experience using Jira, Confluence, and SharePoint for engineering documentation, issue tracking, and project coordination., • Knowledge of software configuration management tools and version control systems. Security Clearance Notice: • Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Specialty Systems, Inc. provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, genetic information, marital status, ancestry, protected veteran status, or any other characteristic protected by applicable federal, state, and local laws and offers equal opportunity for VEVRAA Protected Veterans. Specialty Systems, Inc. will not discriminate against employees and job applicants who inquire about, discuss, or disclose compensation information. Reasonable accommodation that does not cause an undue hardship on the company may be made to enable individuals with disabilities to perform essential functions, as long as that would not hinder or prevent performance of duties or be of a safety concern. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to reach with hands and arms. The employee is frequently required to sit, stand and walk. The employee may be required to move ten pounds and could occasionally lift or move up to twenty-five pounds. Disclaimer: The listed duties are not intended to serve as a comprehensive list of all duties performed by all employees in this classification, only a representative summary of primary duties and responsibilities.

Job DescriptionNDI Engineering Company is seeking a software test engineer to support the Software Test Branch of the Prototype, Manufacturing and Test Department at Naval Air Warfare Center Aircraft Division Lakehurst to join our team in Lakehurst, New Jersey. Must be a US citizen and able to qualify for a DoD Secret Clearance. Role and Responsibilities: • Develop, coordinate, and execute test programs as a Software Test Engineer, • Perform preventative maintenance and troubleshooting on Test Division ALRE systems., • Develop, review, maintain test plans, procedures, test data, test briefs, and test reports, • Analyze test results, identify discrepancies or malfunctions, and work with relevant teams to troubleshoot and resolve issues., • Participate in program and systems engineering technical reviews for ADMACS., • Provide recommendations for improvements or modifications based on testing results and operational feedback. Qualifications: • Engineering or Science degree, preferably a Bachelor’s degree in Computer Science or Computer Engineering, • 3-5 years experience in the software test engineering field with 3+ year experience with ALRE or similar systems., • Experience with test and evaluation processes, • Experience with agile software test and evaluation processes including Scaled Agile Framework a plus, • Strong communication skills, with the ability to clearly document technical findings and communicate with both technical and non-technical stakeholders., • Ability to obtain and maintain a secret clearance, • Ability to support travel to work aboard US Carriers Minimum Requirements Must be a US citizen and able to qualify for a DoD Secret clearance. This work is NOT remote. Working in the Lakehurst, NJ is required. Good verbal and written communications skills along with ability to implement feedback from engineers, follow work instructions and work somewhat independently are highly desirable traits. This work is NOT remote. Working in Lakehurst, NJ is required. NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Powered by JazzHR xXdzq2EtgI

Job Description T&M Associates is seeking a multi-talented Staff Designer 1 to join our Community Development group in New Jersey. This is an excellent opportunity for an early-career engineer to learn and grow within the framework of an engineering consulting firm. This position will begin with a strong emphasis on field-based work, including heavy field inspections and site exposure. Responsibilities will include civil design activities, field inspection, and report writing for capital and private property development projects. This position will also provide opportunities to assist senior-level engineers with planning and zoning board reviews, municipal design projects, contract documents, estimates, and specifications. Qualifications • Bachelor’s degree in either Civil Engineering is required., • 1-2 years of related experience is preferred. Relevant internship experience can be substituted for experience., • Engineer in Training certification is preferred with the goal to obtain a Professional Engineer’s License., • Exhibits fluency with computer software/ technology such as AutoCad, Civil 3D, MicroStation, etc. essential., • Detail oriented with a strong command of design principles and the ability to develop neat and accurate design calculations., • Candidates must be adept at working collaboratively while building strong working relationships with our clients and staff members., • Ability to organize and manage multiple priorities. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $74,000 - $80,000. The actual salary offered may vary within this range, depending on a variety of factors including the candidate’s experience, educational qualifications, specific skills and knowledge, as well as internal pay equity and geographic location. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at www.tandmassociates.com #LI-HYBRID

Job Description NDI Engineering Company is looking for candidates with at least 2 - 5 years of experience in Computer Engineering to work with a team of high energy software and system developers in delivering new/updated systems to the Navy. Candidate will develop and maintain an integrated software system that aligns with the Navy architecture, requirements, objectives and policies for Naval Systems. Qualified candidates should demonstrate a solid 2 - 5 years of computer engineering experience in a development and test environment. Job Responsibilities Systems Engineering Support Services Assist in the development and/or modification of ship design specifications and in the review of user system specifications. Provide engineering support for network products produced for labs, proof-of-concept demonstrations, and fielded shipboard systems. Work in this area includes initial concept exploration and requirements definition, through engineering development, qualification testing, lab and/or shipboard integration, and troubleshooting. Systems Software Testing Services The testing should include: • Software testing, • Software installs and configuration, • Travel required for ship SW installs and test, • Cyber Security Work Force Certification required (must be able to obtain after being hired), • System troubleshooting, • Knowledge of Networks, • Software CM knowledge Life Cycle System Support • Participate in System Program Reviews, Technical Reviews, Technical Exchange Meetings, Engineering Team Meetings and other Technical and Programmatic forums to maintain awareness of program and system issues and initiatives., • Assist in the development of user manuals, technical descriptions, training material, and fact-sheets necessary for the sustained, successful operation and maintenance of mission critical Data Networks., • Assist in the writing of system engineering plan documents, requirements documents, test procedures and plans, test reports and other related technical documentation for lab, test site and shipboard applicability., • Help assess potential cost, schedule, and performance impact associated with installation of proposed program related hardware and software changes. Candidates will be involved with software design, development and testing: • · Develop, modify, enhance, and test software for Test Sites and Shipboard following software assurance best practices throughout the software lifecycle:, • · Analyze information to determine, recommend, and plan the development of a new application or modification of an existing application for security compliance., • · Capture security controls used during the requirements phase to integrate security within the process, identify key security objectives, and maximize software security while minimizing disruption to plans and schedules., • · Apply coding and testing standards, security testing tools, and conduct code reviews., • · Apply secure code documentation., • · Conduct trial runs of programs and software applications to ensure the desired information is produced and instructions are correct., • · Confer with systems analysts, engineers, programmers, and others to design applications and obtain information on project limitations and capabilities, performance requirements, and interfaces. Minimum Requirements • Bachelor of Science in Electrical/Electronic/Computer Engineering, Computer Science, or Information Systems from an accredited institution. CompTIA Security+ or Secure C++ is highly desirable. Working knowledge of DOD/DON cyber security policies and processes, as relates to shipboard software control systems is highly desirable., • The position requires U.S. citizenship and the ability to obtain and maintain an active DOD security clearance. Location: Lakehurst, NJ Pay: $90,000 - $130,000 NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Powered by JazzHR eQkdcuXOFF

Job Description JOB SUMMARY Specialty Systems, Inc. has an opening for a RED Hat Platform Engineer to join our team of technical professionals supporting Government customers and national security mission requirements. In this role, you will support the design, implementation, automation, and sustainment of Red Hat Enterprise Linux (RHEL)-based platform environments supporting mission-critical defense systems and software-intensive applications. The position involves working within Government-provided environments while supporting secure infrastructure operations, platform modernization, DevSecOps integration, and system lifecycle management activities. As a member of the Specialty Systems team, you will contribute directly to secure and reliable platform solutions that support critical defense and intelligence missions. This position is located at our customer site location. In this position, you will work our customer’s Compressed Work Schedule which consists of working four 9-hour days (M-Th) and an 8-hour day (F) for the first week of a cycle followed by four 9-hour days (M-Th) and being off on the second Friday for the second week of a cycle. This results in a 3-day weekend every other week! RESPONSIBILITIES • Design, implement, and maintain Red Hat Enterprise Linux (RHEL)-based platform infrastructure across environments., • Automate system provisioning, configuration management, documentation, and deployment using Infrastructure-as-Code tools., • Administer and maintain Linux systems, including system hardening, patching, and lifecycle management., • Implement and maintain security controls in compliance with DoD requirements (STIGs, RMF)., • Monitor system performance, troubleshoot issues, and ensure platform reliability and scalability., • Coordinate patching, updates, vulnerability remediation, and lifecycle maintenance of Windows systems., • Manage storage, file systems, and system resources for optimal performance., • Collaborate with Agile software, systems engineering, cybersecurity, and automated/manual test teams to support platform integration and delivery., • Maintain documentation, system baselines, and architecture artifacts to support program requirements., • Identify risks, recommend improvements, and support modernization initiatives across platform environments. QUALIFICATIONS: • Bachelor’s degree in Computer Science, Engineering, Information Systems, or a related technical field is preferred. Equivalent work experience may be considered., • Active Secret security clearance or the ability to obtain an interim Secret clearance within approximately four weeks after submission of the clearance application., • 5+ years of experience supporting Windows-based enterprise environments or platform engineering roles., • Security+ CE or ability to obtain within 3–6 months. Technical Requirements: • Strong experience with Red Hat Enterprise Linux (RHEL) systems administration and engineering., • Experience with scripting (Bash, Python) and automation tools (Ansible, Terraform)., • Working knowledge of networking concepts and system security., • Experience implementing and maintaining compliance standards (STIG, RMF, or similar). Preferred Qualifications: • Experience supporting Navy or DoD programs., • Red Hat certifications (RHCSA, RHCE)., • Familiarity with DevSecOps practices and CI/CD pipelines., • Experience with containerization and orchestration (Docker, Podman, Kubernetes, OpenShift)., • Experience with OpenShift or enterprise Kubernetes platforms, • Experience with cloud environments., • Familiarity with Infrastructure-as-Code tools (Ansible, Terraform, or similar). Specialty Systems, Inc. provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, genetic information, marital status, ancestry, protected veteran status, or any other characteristic protected by applicable federal, state, and local laws and offers equal opportunity for VEVRAA Protected Veterans. Specialty Systems, Inc. will not discriminate against employees and job applicants who inquire about, discuss, or disclose compensation information. Reasonable accommodation that do not cause an undue hardship on the company may be made to enable individuals with disabilities to perform essential functions, as long as that would not hinder or prevent performance of duties or be of a safety concern. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to reach with hands and arms. The employee is frequently required to sit, stand and walk. The employee may be required to move ten pounds and could occasionally lift or move up to twenty-five pounds. Disclaimer: The listed duties are not intended to serve as a comprehensive list of all duties performed by all employees in this classification, only a representative summary of primary duties and responsibilities.

Job Description JOB SUMMARY Specialty Systems, Inc. has an opening for a Computer Scientist / Software Engineer to join our team of technical professionals supporting Government customers and national security mission requirements. In this role, you will support the design, development, testing, and sustainment of software-intensive systems used in military command and control, cryptologic mission activities, and other weapons and intelligence systems. The position involves working within Government-provided environments and adhering to established engineering processes, documentation standards, and development practices. As a member of the Specialty Systems team, you will contribute directly to software solutions that support critical defense and intelligence missions. This position is located at our customer site location at Joint Base MDL. In this position, you will work our customer’s Compressed Work Schedule which consists of working four 9hour days (M-Th) and an 8-hour day (F) for the first week of a cycle followed by four 9-hour days (M-Th) and being off on the second Friday for the second week of a cycle. This results in a 3-day weekend every other week! RESPONSIBILITIES • Design, develop, modify, debug, and test software applications supporting mission-critical software-intensive systems, • Develop, modify, debug, and test software applications primarily using C#, • Support lab and operational site-based system testing, • Support Agile development practices including sprint planning, tasking, and iterative delivery, • Create and execute software unit and integration tests and document results in accordance with program standards, • Support software/hardware and system integration, verification, and validation testing, • Assist with troubleshooting issues across development, test, and operational environments and provide technical recommendations, • Produce technical documentation and formal reporting as required, • Participate in technical meetings, reviews, and Integrated Product Team (IPT) collaboration with Government and contractor personnel, • Comply with applicable processes and guidance including government security and mission requirements QUALIFICATIONS: Minimum Qualifications include: • Active Secret Clearance required at time of start, • Bachelor’s degree in computer science, Information Systems, Mathematics, Operations Research, Statistics, Engineering/Science, or related technical discipline, • 3–10 years of experience in software development, testing, and support Strongly Preferred • Experience developing software using C#, • Experience developing and executing unit and integration tests, • Experience working on Agile software development teams, • Experience preparing software documentation and technical reports Desired • Experience with automated software testing frameworks, • Experience with DevSecOps and CI/CD pipelines, • Experience with user interface development, • Experience using Git for source control Specialty Systems, Inc. provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, genetic information, marital status, ancestry, protected veteran status, or any other characteristic protected by applicable federal, state, and local laws and offers equal opportunity for VEVRAA Protected Veterans. Specialty Systems, Inc. will not discriminate against employees and job applicants who inquire about, discuss, or disclose compensation information. Reasonable accommodation that does not cause an undue hardship on the company may be made to enable individuals with disabilities to perform essential functions, as long as that would not hinder or prevent performance of duties or be of a safety concern. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to reach with hands and arms. The employee is frequently required to sit, stand and walk. The employee may be required to move ten

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET IV/Resident Engineer Certified Professional with expertise of managing heavy highway / bridge construction projects, and a construction inspection team. This professional will be responsible for the project record keeping, correspondence, compiling, reviewing, and delivery of required daily inspection reports. The ideal candidate will chair various project meetings, record and prepare and distribute accurate meeting minutes. This individual will need to be well experienced in bridges, highways and have an extensive background in construction especially with clients such as NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Resident Engineer, providing extensive inspection and management of construction project and serve as the Client’s liaison with the Contractor. The RE shall be capable of managing a 3+ CM/CI staff, possess strong communication, computer, and writing skills and be experienced with CPM Scheduling, • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work with client to inform public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Manage all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Bachelor’s degree in civil engineering or construction management, • Minimum of 8 years of experience with 3+ years of experience on projects $10M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • Licensed professional engineer or NICET 4 Highway Construction Inspection required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has supervisory responsibility. The RE shall be capable of managing a 3+ CM/CI staff PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $94,000 - $122,200. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Job Description Remington & Vernick Engineers is a rapidly growing company. The Project Manager is a professional with 5-10 years of experience. This individual will design and/or manage a variety of infrastructure projects (owned by municipalities and local school districts) and will report directly to the Director of Engineering & Planning for Municipal Services. Such projects shall include roads, underground utilities, public buildings, recreational facilities, and land use applications submitted by private developers. PRIMARY DUTIES: • Responsible to act as the client manager to one or more municipalities or other public agencies. The client manager will act as the single point of contact between the firm and the client. He/she will supervise and coordinate all projects performed in the firm on behalf of the client, to the client’s satisfaction., • Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure., • Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Estimate quantities and cost of materials, equipment, or labor to determine project feasibility., • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact., • Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations., • Identify environmental risks and develop risk management strategies for projects., • Attend regularly scheduled public meetings (conducted by Municipal clients) in the capacity of Municipal Engineer, or Land Use Board Engineer. Prepare and present public reports on topics such as bid proposals, project status reports and developmental review projects. KNOWLEDGE, SKILLS and ABILITIES: • Municipal Engineering experience preferred but not required, • Strong oral and written communication skills, • Ability to make public presentations, • Ability to define problems, collect data, establish facts and draw conclusions to present to co-workers and clients., • Strong organizational skills and attention to detail, • Knowledge of computer aided design software, • Ability to work in groups as well as individually EDUCATION/EXPERIENCE: • Bachelor of Science Degree in Engineering (any discipline) from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • Valid driver’s license, • PE License Required SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. Occasional travel will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer. #LI-KS1

Job Description POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Description JOB SUMMARY Specialty Systems, Inc. has an opening for a Windows Platform Engineer to join our team of technical professionals supporting Government customers and national security mission requirements. In this role, you will support the design, implementation, automation, and sustainment of Windows-based platform environments supporting mission-critical defense systems and software-intensive applications. The position involves working within Government-provided environments while supporting secure infrastructure operations, platform modernization, DevSecOps integration, and enterprise system lifecycle management activities. As a member of the Specialty Systems team, you will contribute directly to secure and reliable platform solutions supporting critical defense and intelligence missions. This position is located at our customer site location. In this position, you will work our customer’s Compressed Work Schedule which consists of working four 9-hour days (M-Th) and an 8-hour day (F) for the first week of a cycle followed by four 9-hour days (M-Th) and being off on the second Friday for the second week of a cycle. This results in a 3-day weekend every other week! RESPONSIBILITIES • Design, implement, and maintain Windows-based platform infrastructure across development, test, and production environments., • Engineer, automate, and document system provisioning, configuration management, and deployment processes., • Administer and maintain Windows Server environments, including Active Directory, Group Policy, and domain services., • Implement and maintain system security configurations in compliance with DoD cybersecurity requirements (STIGs, RMF)., • Monitor system performance, troubleshoot issues, and optimize platform reliability and availability., • Coordinate patching, updates, vulnerability remediation, and lifecycle maintenance of Windows systems., • Collaborate with Agile software, systems engineering, cybersecurity, and automated/manual test teams to support platform integration and delivery., • Maintain documentation, system baselines, and architecture artifacts to support program requirements., • Identify risks, recommend improvements, and support modernization initiatives across platform environments. QUALIFICATIONS: • Bachelor’s degree in Computer Science, Engineering, Information Systems, or a related technical field is preferred. Equivalent work experience may be considered., • Active Secret security clearance or the ability to obtain an interim Secret clearance within approximately four weeks after submission of the clearance application., • 5+ years of experience supporting Windows-based enterprise environments or platform engineering roles., • Security+ CE or ability to obtain within 3–6 months. Technical Requirements: • Strong experience with Windows Server (2016/2019/2022), Windows 10/11, Active Directory, and Group Policy., • Experience with PowerShell scripting and automation., • Working knowledge of networking concepts and system security., • Experience implementing and maintaining compliance standards (STIG, RMF, or similar). Preferred Qualifications: • Experience supporting Navy or DoD programs., • Experience with cloud platforms., • Familiarity with DevSecOps practices and CI/CD pipelines., • Experience with Jira, Confluence, Git, and artifact/configuration repositories., • Experience with containerization technologies (Docker, Kubernetes on Windows)., • Microsoft certifications (e.g., Windows Server Hybrid Administrator, Microsoft Server Administrator)., • Experience with virtualized environments (VMware, VirtualBox, Hyper-V)., • Familiarity with Infrastructure-as-Code tools (Ansible, Terraform, or similar). Specialty Systems, Inc. provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability status, genetic information, marital status, ancestry, protected veteran status, or any other characteristic protected by applicable federal, state, and local laws and offers equal opportunity for VEVRAA Protected Veterans. Specialty Systems, Inc. will not discriminate against employees and job applicants who inquire about, discuss, or disclose compensation information. Reasonable accommodation that do not cause an undue hardship on the company may be made to enable individuals with disabilities to perform essential functions, as long as that would not hinder or prevent performance of duties or be of a safety concern. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to reach with hands and arms. The employee is frequently required to sit, stand and walk. The employee may be required to move ten pounds and could occasionally lift or move up to twenty-five pounds. Disclaimer: The listed duties are not intended to serve as a comprehensive list of all duties performed by all employees in this classification, only a representative summary of primary duties and responsibilities.

Toms River Regional Schools has 18 schools, 3 support facilities and over 520 acres within all its campuses. Six of our athletic fields are artificial grass with heavy community use. Many of our sites are utilized for State Championship Sporting events. We are excited about our facilities, proud of the workers who maintain them and anticipate great things as we integrate department changes. There is a need for Grounds Keeper positions All types of work are undertaken by our staff and the ability to work with others as well as others on team projects is expected. The selected candidates need to demonstrate; a strong work ethic with time management skills commitment to detail Team player with ability to work independently at times with limited assistance Good communication skills CDL license preferred. All types of work are undertaken by our staff and the ability to work with others on team projects is expected. Lawn sprinklering systems and time clock operation Responsibilities include, but are not limited to; maintaining grounds- all facets lining of fields for all sporting events knowledge and use of various types of snow removal equipment, augers for fence installation, chain saws for tree removal, small tools, lawn sprinkler systems, etc. jobs include, but are not limited to: maintaining grounds, lining of fields for all sporting events. Knowledge and use of various types of snow removal equipment, augers for fence installation, chain saws for tree removal, small tools, lawn sprinklering systems, etc. ability to assist with snow plow operations during winter is critical. Valid NJ Drivers license required. Abstract will be required. Computer skills a plus. 1. High school diploma or GED 2. A strong work ethic 3. Ability to work independently at times with limited assistance 4. A New Jersey Driver's License, CDL preferred 5. Ability to work in cold, hot, wet and dry weather conditions 6. Ability to meet Essential Job Task requirements 7. Pass medical screenings and drug tests 8. Required criminal history check and proof of U.S. citizenship or resident alien status 9. Ability to communicate both listening and verbally in English Reports To: Head Groundskeeper and Grounds Foreman, District Engineer, Educational Facilities Manager Job Goal: To maintain school property in a clean, safe condition. 1. Maintaining grounds- all facets by working safely and diligently., 2. Set up and lining of fields for all sporting events., 3. Assists in review of bid packages for projects and yearly bids for procurement of goods and services., 4. Knowledge and use of various types of snow removal equipment, augers for fence installation, chain saws for tree removal, small tools, lawn sprinkler systems, etc., 5. Jobs include, but are not limited to: a. cut grass b. weed wack c. trim, cut and prune bushes, trees d. set up and lining of fields for all sporting events e. installation and repairs to fences 6. Knowledge and use of various types of snow removal equipment, augers for fence installation, chain saws for tree removal, small tools, lawn sprinkler systems, pruning and care for various tree and plant species, etc., 6. Ability to assist with snow plow operations during winter is critical., 7. Performs other duties which may be assigned or required by law, code, regulation or board policy and/or the Business Administrator or his/her designee. Annual Evaluation: Performance of this job will be evaluated annually in accordance with New Jersey State law and the provision of the board's policy on evaluation of non-certified staff. Employed on a 12 Month basis Adopted by: Toms River Regional Schools Date: June 15, 2016 Revision:

PRIMARY FUNCTION: The Airframe Sheet Metal Technician is responsible for ensuring that aircraft and equipment is functioning safely and efficiently. ESSENTIAL FUNCTIONS • Fabricates, assembles, and installs prototype equipment used in research and development information on a large variety of aircraft ranging from single airplanes to complex, multi-engine jets and helicopters, • Interprets military technical manuals, technical orders, modification work orders and blue prints, • Installs prototype equipment on aircraft and make modifications to the existing airframe to accommodate installations, • Coordinates with project engineer personnel throughout the project providing technical assistance to project engineers, contractors, ad factory representatives, etc., • Performs sheet metal repairs to a variety of aircraft, possess an in-depth knowledge of sheet metal materials and repair techniques, • Works with various thickness of aluminum, steel alloys, stainless steel, copper, brass and other ferrous and non-ferrous metals in the fabrication of production metal parts for aircraft modifications, • Operates tools and equipment associated with sheet metal shop operation such as protractors, calipers, gauges, crimping tools/machines, forming machines, lathes, milling machines, saws, drilling presses, gas and heli-arc welding machine, • Understand and interprets blueprints, schematics and rudimentary drawings, • The Airframe Sheet Metal Technician may be required to perform other related duties to meet the ongoing needs of the organization SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. This position has the responsibility and authority to carry out assigned tasks. KNOWLEDGE, SKILLS, & ABILITIES: • Beginner to intermediate computer skills specifically using Microsoft Office Suite; ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred, • Ability to enter data accurately into databases., • Ability to understand and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence, • Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members, • Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc., • Ability to follow a process., • Strong professional customer service skills, including active listening, prompt service and follow-up., • Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management., • Ability to learn and understand corporate policies and procedures and how they relate to goals., • Ability to perform basic mathematical computations, • High degree of self-motivation and the ability to work independently, • Ability to multi-task, • Climbs on top of and down from aircraft using aircraft hand/foot holds, capable of lifting up to 25 lbs. overhead, on feet all day, walk up to 2 miles per day. QUALIFICATIONS: • High School Diploma / Equivalent, • Minimum five (5) years recent and total experience in Airframe repair, plus a demonstrated ability to fabricate complex items from rudimentary drawings or verbal direction., • Must have ability understand, interpret and apply technical manual (TM) instructions as well as other approved sources of technical information., • Familiarity with Y-Tech's policies and procedures, • Must have the ability to obtain and maintain a Government Security Clearance, • Must have a shadowed toolbox and a complete set of Airframe Sheet Metal Tools PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Senior Network Engineer/Computer EngineerLocation: Lakehurst New Jersey (onsite) Long term durationJob description: Responsible for designing, developing, and testing computer systems and components to ensure optimal performance and functionality. Experience required: Education: BS in Computer Scien

Junior Network Engineer/Computer EngineerLocation: Lakehurst New Jersey (onsite) Long term durationUnder the oversight of more senior engineers, works on design, development, or test of hardware/software system employing knowledge of engineering principles. Education: BS in Computer Science, Informa

Job DescriptionJob Requirements The Senior Sales Engineer- HVAC is responsible for elevating awareness to Stark Tech's core competencies and capabilities through active account management with assigned accounts to achieve revenue and profit targets. This individual will work with management and peers on account management, sales strategies and goal achievement, project design, project bidding, project management, and pipeline management. In addition, this role will be a strong technical resource for customers and will develop professional relationships with the manufacturers that Stark's Building Solutions Sales & Marketing team represents. Compensation The expected pay range for this position is $93,007-$124,009 annually, depending on experience, qualifications, and geographic location. Stark Tech reasonably expects to pay within this range at the time of hire. Individual compensation is determined based on several factors including experience, education, certifications, skills, internal equity, and market conditions. In addition to base salary, this position is eligible to participate in a commission and/or incentive compensation program. Actual earnings are based on individual performance and applicable plan terms. Work Experience • Associate's degree in engineering required. Bachelor's degree preferred., • 10 years of experience in sales engineering., • A proven track record in account management., • Knowledge of construction industry., • Understanding of product and systems application and design & project management., • Strong Computer skills including Microsoft Office Suite is essential. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies like renewable natural gas conversion and energy storage solutions. At Stark Tech, we prioritize employee well-being and offer comprehensive benefits including paid time off, 401(k) with employer match, medical coverage, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. \nCompany Description At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter. At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.